summaryrefslogtreecommitdiffstats
path: root/drivers
diff options
context:
space:
mode:
Diffstat (limited to 'drivers')
-rw-r--r--drivers/dma/Kconfig2
-rw-r--r--drivers/leds/leds-locomo.c2
-rw-r--r--drivers/mfd/mcp-core.c2
-rw-r--r--drivers/mfd/mcp-sa11x0.c3
-rw-r--r--drivers/mfd/mcp.h66
-rw-r--r--drivers/mfd/ucb1x00-assabet.c2
-rw-r--r--drivers/mfd/ucb1x00-core.c89
-rw-r--r--drivers/mfd/ucb1x00-ts.c2
-rw-r--r--drivers/mfd/ucb1x00.h255
-rw-r--r--drivers/mmc/host/mmci.c2
-rw-r--r--drivers/mmc/host/pxamci.c10
-rw-r--r--drivers/mtd/nand/Kconfig2
-rw-r--r--drivers/mtd/nand/pxa3xx_nand.c82
-rw-r--r--drivers/pcmcia/Kconfig2
-rw-r--r--drivers/pcmcia/sa1100_generic.c2
-rw-r--r--drivers/pcmcia/sa1100_h3600.c140
-rw-r--r--drivers/power/Kconfig7
-rw-r--r--drivers/power/Makefile1
-rw-r--r--drivers/power/collie_battery.c418
-rw-r--r--drivers/rtc/Kconfig2
-rw-r--r--drivers/serial/s3c2410.c2
-rw-r--r--drivers/serial/s3c2412.c2
-rw-r--r--drivers/serial/s3c2440.c2
-rw-r--r--drivers/serial/s3c24a0.c2
-rw-r--r--drivers/serial/samsung.c2
-rw-r--r--drivers/serial/samsung.h2
-rw-r--r--drivers/video/Kconfig5
-rw-r--r--drivers/video/backlight/da903x_bl.c7
-rw-r--r--drivers/video/backlight/tdo24m.c1
-rw-r--r--drivers/video/pxa168fb.c1
-rw-r--r--drivers/video/pxafb.c23
31 files changed, 751 insertions, 389 deletions
diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
index b401dadad4a..eb140ff38c2 100644
--- a/drivers/dma/Kconfig
+++ b/drivers/dma/Kconfig
@@ -54,7 +54,7 @@ config DW_DMAC
config AT_HDMAC
tristate "Atmel AHB DMA support"
- depends on ARCH_AT91SAM9RL
+ depends on ARCH_AT91SAM9RL || ARCH_AT91SAM9G45
select DMA_ENGINE
help
Support the Atmel AHB DMA controller. This can be integrated in
diff --git a/drivers/leds/leds-locomo.c b/drivers/leds/leds-locomo.c
index 5d91362e306..1f7c10f6b7f 100644
--- a/drivers/leds/leds-locomo.c
+++ b/drivers/leds/leds-locomo.c
@@ -44,7 +44,7 @@ static void locomoled_brightness_set1(struct led_classdev *led_cdev,
static struct led_classdev locomo_led0 = {
.name = "locomo:amber:charge",
- .default_trigger = "sharpsl-charge",
+ .default_trigger = "main-battery-charging",
.brightness_set = locomoled_brightness_set0,
};
diff --git a/drivers/mfd/mcp-core.c b/drivers/mfd/mcp-core.c
index 57271cb3b31..84815f9ef63 100644
--- a/drivers/mfd/mcp-core.c
+++ b/drivers/mfd/mcp-core.c
@@ -17,11 +17,11 @@
#include <linux/device.h>
#include <linux/slab.h>
#include <linux/string.h>
+#include <linux/mfd/mcp.h>
#include <mach/dma.h>
#include <asm/system.h>
-#include "mcp.h"
#define to_mcp(d) container_of(d, struct mcp, attached_device)
#define to_mcp_driver(d) container_of(d, struct mcp_driver, drv)
diff --git a/drivers/mfd/mcp-sa11x0.c b/drivers/mfd/mcp-sa11x0.c
index 62b32dabf62..25842723272 100644
--- a/drivers/mfd/mcp-sa11x0.c
+++ b/drivers/mfd/mcp-sa11x0.c
@@ -19,6 +19,7 @@
#include <linux/spinlock.h>
#include <linux/slab.h>
#include <linux/platform_device.h>
+#include <linux/mfd/mcp.h>
#include <mach/dma.h>
#include <mach/hardware.h>
@@ -28,7 +29,6 @@
#include <mach/assabet.h>
-#include "mcp.h"
struct mcp_sa11x0 {
u32 mccr0;
@@ -163,6 +163,7 @@ static int mcp_sa11x0_probe(struct platform_device *pdev)
mcp->dma_audio_wr = DMA_Ser4MCP0Wr;
mcp->dma_telco_rd = DMA_Ser4MCP1Rd;
mcp->dma_telco_wr = DMA_Ser4MCP1Wr;
+ mcp->gpio_base = data->gpio_base;
platform_set_drvdata(pdev, mcp);
diff --git a/drivers/mfd/mcp.h b/drivers/mfd/mcp.h
deleted file mode 100644
index c093a93b880..00000000000
--- a/drivers/mfd/mcp.h
+++ /dev/null
@@ -1,66 +0,0 @@
-/*
- * linux/drivers/mfd/mcp.h
- *
- * Copyright (C) 2001 Russell King, All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License.
- */
-#ifndef MCP_H
-#define MCP_H
-
-struct mcp_ops;
-
-struct mcp {
- struct module *owner;
- struct mcp_ops *ops;
- spinlock_t lock;
- int use_count;
- unsigned int sclk_rate;
- unsigned int rw_timeout;
- dma_device_t dma_audio_rd;
- dma_device_t dma_audio_wr;
- dma_device_t dma_telco_rd;
- dma_device_t dma_telco_wr;
- struct device attached_device;
-};
-
-struct mcp_ops {
- void (*set_telecom_divisor)(struct mcp *, unsigned int);
- void (*set_audio_divisor)(struct mcp *, unsigned int);
- void (*reg_write)(struct mcp *, unsigned int, unsigned int);
- unsigned int (*reg_read)(struct mcp *, unsigned int);
- void (*enable)(struct mcp *);
- void (*disable)(struct mcp *);
-};
-
-void mcp_set_telecom_divisor(struct mcp *, unsigned int);
-void mcp_set_audio_divisor(struct mcp *, unsigned int);
-void mcp_reg_write(struct mcp *, unsigned int, unsigned int);
-unsigned int mcp_reg_read(struct mcp *, unsigned int);
-void mcp_enable(struct mcp *);
-void mcp_disable(struct mcp *);
-#define mcp_get_sclk_rate(mcp) ((mcp)->sclk_rate)
-
-struct mcp *mcp_host_alloc(struct device *, size_t);
-int mcp_host_register(struct mcp *);
-void mcp_host_unregister(struct mcp *);
-
-struct mcp_driver {
- struct device_driver drv;
- int (*probe)(struct mcp *);
- void (*remove)(struct mcp *);
- int (*suspend)(struct mcp *, pm_message_t);
- int (*resume)(struct mcp *);
-};
-
-int mcp_driver_register(struct mcp_driver *);
-void mcp_driver_unregister(struct mcp_driver *);
-
-#define mcp_get_drvdata(mcp) dev_get_drvdata(&(mcp)->attached_device)
-#define mcp_set_drvdata(mcp,d) dev_set_drvdata(&(mcp)->attached_device, d)
-
-#define mcp_priv(mcp) ((void *)((mcp)+1))
-
-#endif
diff --git a/drivers/mfd/ucb1x00-assabet.c b/drivers/mfd/ucb1x00-assabet.c
index 86fed4870f9..cea9da60850 100644
--- a/drivers/mfd/ucb1x00-assabet.c
+++ b/drivers/mfd/ucb1x00-assabet.c
@@ -14,10 +14,10 @@
#include <linux/fs.h>
#include <linux/proc_fs.h>
#include <linux/device.h>
+#include <linux/mfd/ucb1x00.h>
#include <mach/dma.h>
-#include "ucb1x00.h"
#define UCB1X00_ATTR(name,input)\
static ssize_t name##_show(struct device *dev, struct device_attribute *attr, \
diff --git a/drivers/mfd/ucb1x00-core.c b/drivers/mfd/ucb1x00-core.c
index 60c3988f3cf..252b74188ec 100644
--- a/drivers/mfd/ucb1x00-core.c
+++ b/drivers/mfd/ucb1x00-core.c
@@ -25,12 +25,12 @@
#include <linux/interrupt.h>
#include <linux/device.h>
#include <linux/mutex.h>
+#include <linux/mfd/ucb1x00.h>
+#include <linux/gpio.h>
#include <mach/dma.h>
#include <mach/hardware.h>
-#include "ucb1x00.h"
-
static DEFINE_MUTEX(ucb1x00_mutex);
static LIST_HEAD(ucb1x00_drivers);
static LIST_HEAD(ucb1x00_devices);
@@ -108,6 +108,60 @@ unsigned int ucb1x00_io_read(struct ucb1x00 *ucb)
return ucb1x00_reg_read(ucb, UCB_IO_DATA);
}
+static void ucb1x00_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+ struct ucb1x00 *ucb = container_of(chip, struct ucb1x00, gpio);
+ unsigned long flags;
+
+ spin_lock_irqsave(&ucb->io_lock, flags);
+ if (value)
+ ucb->io_out |= 1 << offset;
+ else
+ ucb->io_out &= ~(1 << offset);
+
+ ucb1x00_reg_write(ucb, UCB_IO_DATA, ucb->io_out);
+ spin_unlock_irqrestore(&ucb->io_lock, flags);
+}
+
+static int ucb1x00_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+ struct ucb1x00 *ucb = container_of(chip, struct ucb1x00, gpio);
+ return ucb1x00_reg_read(ucb, UCB_IO_DATA) & (1 << offset);
+}
+
+static int ucb1x00_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
+{
+ struct ucb1x00 *ucb = container_of(chip, struct ucb1x00, gpio);
+ unsigned long flags;
+
+ spin_lock_irqsave(&ucb->io_lock, flags);
+ ucb->io_dir &= ~(1 << offset);
+ ucb1x00_reg_write(ucb, UCB_IO_DIR, ucb->io_dir);
+ spin_unlock_irqrestore(&ucb->io_lock, flags);
+
+ return 0;
+}
+
+static int ucb1x00_gpio_direction_output(struct gpio_chip *chip, unsigned offset
+ , int value)
+{
+ struct ucb1x00 *ucb = container_of(chip, struct ucb1x00, gpio);
+ unsigned long flags;
+
+ spin_lock_irqsave(&ucb->io_lock, flags);
+ ucb->io_dir |= (1 << offset);
+ ucb1x00_reg_write(ucb, UCB_IO_DIR, ucb->io_dir);
+
+ if (value)
+ ucb->io_out |= 1 << offset;
+ else
+ ucb->io_out &= ~(1 << offset);
+ ucb1x00_reg_write(ucb, UCB_IO_DATA, ucb->io_out);
+ spin_unlock_irqrestore(&ucb->io_lock, flags);
+
+ return 0;
+}
+
/*
* UCB1300 data sheet says we must:
* 1. enable ADC => 5us (including reference startup time)
@@ -476,6 +530,7 @@ static int ucb1x00_probe(struct mcp *mcp)
struct ucb1x00_driver *drv;
unsigned int id;
int ret = -ENODEV;
+ int temp;
mcp_enable(mcp);
id = mcp_reg_read(mcp, UCB_ID);
@@ -508,12 +563,27 @@ static int ucb1x00_probe(struct mcp *mcp)
goto err_free;
}
+ ucb->gpio.base = -1;
+ if (mcp->gpio_base != 0) {
+ ucb->gpio.label = dev_name(&ucb->dev);
+ ucb->gpio.base = mcp->gpio_base;
+ ucb->gpio.ngpio = 10;
+ ucb->gpio.set = ucb1x00_gpio_set;
+ ucb->gpio.get = ucb1x00_gpio_get;
+ ucb->gpio.direction_input = ucb1x00_gpio_direction_input;
+ ucb->gpio.direction_output = ucb1x00_gpio_direction_output;
+ ret = gpiochip_add(&ucb->gpio);
+ if (ret)
+ goto err_free;
+ } else
+ dev_info(&ucb->dev, "gpio_base not set so no gpiolib support");
+
ret = request_irq(ucb->irq, ucb1x00_irq, IRQF_TRIGGER_RISING,
"UCB1x00", ucb);
if (ret) {
printk(KERN_ERR "ucb1x00: unable to grab irq%d: %d\n",
ucb->irq, ret);
- goto err_free;
+ goto err_gpio;
}
mcp_set_drvdata(mcp, ucb);
@@ -522,6 +592,7 @@ static int ucb1x00_probe(struct mcp *mcp)
if (ret)
goto err_irq;
+
INIT_LIST_HEAD(&ucb->devs);
mutex_lock(&ucb1x00_mutex);
list_add(&ucb->node, &ucb1x00_devices);
@@ -529,10 +600,14 @@ static int ucb1x00_probe(struct mcp *mcp)
ucb1x00_add_dev(ucb, drv);
}
mutex_unlock(&ucb1x00_mutex);
+
goto out;
err_irq:
free_irq(ucb->irq, ucb);
+ err_gpio:
+ if (ucb->gpio.base != -1)
+ temp = gpiochip_remove(&ucb->gpio);
err_free:
kfree(ucb);
err_disable:
@@ -545,6 +620,7 @@ static void ucb1x00_remove(struct mcp *mcp)
{
struct ucb1x00 *ucb = mcp_get_drvdata(mcp);
struct list_head *l, *n;
+ int ret;
mutex_lock(&ucb1x00_mutex);
list_del(&ucb->node);
@@ -554,6 +630,12 @@ static void ucb1x00_remove(struct mcp *mcp)
}
mutex_unlock(&ucb1x00_mutex);
+ if (ucb->gpio.base != -1) {
+ ret = gpiochip_remove(&ucb->gpio);
+ if (ret)
+ dev_err(&ucb->dev, "Can't remove gpio chip: %d\n", ret);
+ }
+
free_irq(ucb->irq, ucb);
device_unregister(&ucb->dev);
}
@@ -604,6 +686,7 @@ static int ucb1x00_resume(struct mcp *mcp)
struct ucb1x00 *ucb = mcp_get_drvdata(mcp);
struct ucb1x00_dev *dev;
+ ucb1x00_reg_write(ucb, UCB_IO_DIR, ucb->io_dir);
mutex_lock(&ucb1x00_mutex);
list_for_each_entry(dev, &ucb->devs, dev_node) {
if (dev->drv->resume)
diff --git a/drivers/mfd/ucb1x00-ts.c b/drivers/mfd/ucb1x00-ts.c
index 61b7d3eb9a2..000cb414a78 100644
--- a/drivers/mfd/ucb1x00-ts.c
+++ b/drivers/mfd/ucb1x00-ts.c
@@ -30,12 +30,12 @@
#include <linux/freezer.h>
#include <linux/slab.h>
#include <linux/kthread.h>
+#include <linux/mfd/ucb1x00.h>
#include <mach/dma.h>
#include <mach/collie.h>
#include <asm/mach-types.h>
-#include "ucb1x00.h"
struct ucb1x00_ts {
diff --git a/drivers/mfd/ucb1x00.h b/drivers/mfd/ucb1x00.h
deleted file mode 100644
index a8ad8a0ed5d..00000000000
--- a/drivers/mfd/ucb1x00.h
+++ /dev/null
@@ -1,255 +0,0 @@
-/*
- * linux/drivers/mfd/ucb1x00.h
- *
- * Copyright (C) 2001 Russell King, All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License.
- */
-#ifndef UCB1200_H
-#define UCB1200_H
-
-#define UCB_IO_DATA 0x00
-#define UCB_IO_DIR 0x01
-
-#define UCB_IO_0 (1 << 0)
-#define UCB_IO_1 (1 << 1)
-#define UCB_IO_2 (1 << 2)
-#define UCB_IO_3 (1 << 3)
-#define UCB_IO_4 (1 << 4)
-#define UCB_IO_5 (1 << 5)
-#define UCB_IO_6 (1 << 6)
-#define UCB_IO_7 (1 << 7)
-#define UCB_IO_8 (1 << 8)
-#define UCB_IO_9 (1 << 9)
-
-#define UCB_IE_RIS 0x02
-#define UCB_IE_FAL 0x03
-#define UCB_IE_STATUS 0x04
-#define UCB_IE_CLEAR 0x04
-#define UCB_IE_ADC (1 << 11)
-#define UCB_IE_TSPX (1 << 12)
-#define UCB_IE_TSMX (1 << 13)
-#define UCB_IE_TCLIP (1 << 14)
-#define UCB_IE_ACLIP (1 << 15)
-
-#define UCB_IRQ_TSPX 12
-
-#define UCB_TC_A 0x05
-#define UCB_TC_A_LOOP (1 << 7) /* UCB1200 */
-#define UCB_TC_A_AMPL (1 << 7) /* UCB1300 */
-
-#define UCB_TC_B 0x06
-#define UCB_TC_B_VOICE_ENA (1 << 3)
-#define UCB_TC_B_CLIP (1 << 4)
-#define UCB_TC_B_ATT (1 << 6)
-#define UCB_TC_B_SIDE_ENA (1 << 11)
-#define UCB_TC_B_MUTE (1 << 13)
-#define UCB_TC_B_IN_ENA (1 << 14)
-#define UCB_TC_B_OUT_ENA (1 << 15)
-
-#define UCB_AC_A 0x07
-#define UCB_AC_B 0x08
-#define UCB_AC_B_LOOP (1 << 8)
-#define UCB_AC_B_MUTE (1 << 13)
-#define UCB_AC_B_IN_ENA (1 << 14)
-#define UCB_AC_B_OUT_ENA (1 << 15)
-
-#define UCB_TS_CR 0x09
-#define UCB_TS_CR_TSMX_POW (1 << 0)
-#define UCB_TS_CR_TSPX_POW (1 << 1)
-#define UCB_TS_CR_TSMY_POW (1 << 2)
-#define UCB_TS_CR_TSPY_POW (1 << 3)
-#define UCB_TS_CR_TSMX_GND (1 << 4)
-#define UCB_TS_CR_TSPX_GND (1 << 5)
-#define UCB_TS_CR_TSMY_GND (1 << 6)
-#define UCB_TS_CR_TSPY_GND (1 << 7)
-#define UCB_TS_CR_MODE_INT (0 << 8)
-#define UCB_TS_CR_MODE_PRES (1 << 8)
-#define UCB_TS_CR_MODE_POS (2 << 8)
-#define UCB_TS_CR_BIAS_ENA (1 << 11)
-#define UCB_TS_CR_TSPX_LOW (1 << 12)
-#define UCB_TS_CR_TSMX_LOW (1 << 13)
-
-#define UCB_ADC_CR 0x0a
-#define UCB_ADC_SYNC_ENA (1 << 0)
-#define UCB_ADC_VREFBYP_CON (1 << 1)
-#define UCB_ADC_INP_TSPX (0 << 2)
-#define UCB_ADC_INP_TSMX (1 << 2)
-#define UCB_ADC_INP_TSPY (2 << 2)
-#define UCB_ADC_INP_TSMY (3 << 2)
-#define UCB_ADC_INP_AD0 (4 << 2)
-#define UCB_ADC_INP_AD1 (5 << 2)
-#define UCB_ADC_INP_AD2 (6 << 2)
-#define UCB_ADC_INP_AD3 (7 << 2)
-#define UCB_ADC_EXT_REF (1 << 5)
-#define UCB_ADC_START (1 << 7)
-#define UCB_ADC_ENA (1 << 15)
-
-#define UCB_ADC_DATA 0x0b
-#define UCB_ADC_DAT_VAL (1 << 15)
-#define UCB_ADC_DAT(x) (((x) & 0x7fe0) >> 5)
-
-#define UCB_ID 0x0c
-#define UCB_ID_1200 0x1004
-#define UCB_ID_1300 0x1005
-#define UCB_ID_TC35143 0x9712
-
-#define UCB_MODE 0x0d
-#define UCB_MODE_DYN_VFLAG_ENA (1 << 12)
-#define UCB_MODE_AUD_OFF_CAN (1 << 13)
-
-#include "mcp.h"
-
-struct ucb1x00_irq {
- void *devid;
- void (*fn)(int, void *);
-};
-
-struct ucb1x00 {
- spinlock_t lock;
- struct mcp *mcp;
- unsigned int irq;
- struct semaphore adc_sem;
- spinlock_t io_lock;
- u16 id;
- u16 io_dir;
- u16 io_out;
- u16 adc_cr;
- u16 irq_fal_enbl;
- u16 irq_ris_enbl;
- struct ucb1x00_irq irq_handler[16];
- struct device dev;
- struct list_head node;
- struct list_head devs;
-};
-
-struct ucb1x00_driver;
-
-struct ucb1x00_dev {
- struct list_head dev_node;
- struct list_head drv_node;
- struct ucb1x00 *ucb;
- struct ucb1x00_driver *drv;
- void *priv;
-};
-
-struct ucb1x00_driver {
- struct list_head node;
- struct list_head devs;
- int (*add)(struct ucb1x00_dev *dev);
- void (*remove)(struct ucb1x00_dev *dev);
- int (*suspend)(struct ucb1x00_dev *dev, pm_message_t state);
- int (*resume)(struct ucb1x00_dev *dev);
-};
-
-#define classdev_to_ucb1x00(cd) container_of(cd, struct ucb1x00, dev)
-
-int ucb1x00_register_driver(struct ucb1x00_driver *);
-void ucb1x00_unregister_driver(struct ucb1x00_driver *);
-
-/**
- * ucb1x00_clkrate - return the UCB1x00 SIB clock rate
- * @ucb: UCB1x00 structure describing chip
- *
- * Return the SIB clock rate in Hz.
- */
-static inline unsigned int ucb1x00_clkrate(struct ucb1x00 *ucb)
-{
- return mcp_get_sclk_rate(ucb->mcp);
-}
-
-/**
- * ucb1x00_enable - enable the UCB1x00 SIB clock
- * @ucb: UCB1x00 structure describing chip
- *
- * Enable the SIB clock. This can be called multiple times.
- */
-static inline void ucb1x00_enable(struct ucb1x00 *ucb)
-{
- mcp_enable(ucb->mcp);
-}
-
-/**
- * ucb1x00_disable - disable the UCB1x00 SIB clock
- * @ucb: UCB1x00 structure describing chip
- *
- * Disable the SIB clock. The SIB clock will only be disabled
- * when the number of ucb1x00_enable calls match the number of
- * ucb1x00_disable calls.
- */
-static inline void ucb1x00_disable(struct ucb1x00 *ucb)
-{
- mcp_disable(ucb->mcp);
-}
-
-/**
- * ucb1x00_reg_write - write a UCB1x00 register
- * @ucb: UCB1x00 structure describing chip
- * @reg: UCB1x00 4-bit register index to write
- * @val: UCB1x00 16-bit value to write
- *
- * Write the UCB1x00 register @reg with value @val. The SIB
- * clock must be running for this function to return.
- */
-static inline void ucb1x00_reg_write(struct ucb1x00 *ucb, unsigned int reg, unsigned int val)
-{
- mcp_reg_write(ucb->mcp, reg, val);
-}
-
-/**
- * ucb1x00_reg_read - read a UCB1x00 register
- * @ucb: UCB1x00 structure describing chip
- * @reg: UCB1x00 4-bit register index to write
- *
- * Read the UCB1x00 register @reg and return its value. The SIB
- * clock must be running for this function to return.
- */
-static inline unsigned int ucb1x00_reg_read(struct ucb1x00 *ucb, unsigned int reg)
-{
- return mcp_reg_read(ucb->mcp, reg);
-}
-/**
- * ucb1x00_set_audio_divisor -
- * @ucb: UCB1x00 structure describing chip
- * @div: SIB clock divisor
- */
-static inline void ucb1x00_set_audio_divisor(struct ucb1x00 *ucb, unsigned int div)
-{
- mcp_set_audio_divisor(ucb->mcp, div);
-}
-
-/**
- * ucb1x00_set_telecom_divisor -
- * @ucb: UCB1x00 structure describing chip
- * @div: SIB clock divisor
- */
-static inline void ucb1x00_set_telecom_divisor(struct ucb1x00 *ucb, unsigned int div)
-{
- mcp_set_telecom_divisor(ucb->mcp, div);
-}
-
-void ucb1x00_io_set_dir(struct ucb1x00 *ucb, unsigned int, unsigned int);
-void ucb1x00_io_write(struct ucb1x00 *ucb, unsigned int, unsigned int);
-unsigned int ucb1x00_io_read(struct ucb1x00 *ucb);
-
-#define UCB_NOSYNC (0)
-#define UCB_SYNC (1)
-
-unsigned int ucb1x00_adc_read(struct ucb1x00 *ucb, int adc_channel, int sync);
-void ucb1x00_adc_enable(struct ucb1x00 *ucb);
-void ucb1x00_adc_disable(struct ucb1x00 *ucb);
-
-/*
- * Which edges of the IRQ do you want to control today?
- */
-#define UCB_RISING (1 << 0)
-#define UCB_FALLING (1 << 1)
-
-int ucb1x00_hook_irq(struct ucb1x00 *ucb, unsigned int idx, void (*fn)(int, void *), void *devid);
-void ucb1x00_enable_irq(struct ucb1x00 *ucb, unsigned int idx, int edges);
-void ucb1x00_disable_irq(struct ucb1x00 *ucb, unsigned int idx, int edges);
-int ucb1x00_free_irq(struct ucb1x00 *ucb, unsigned int idx, void *devid);
-
-#endif
diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index 705a5894a6b..90d168ad03b 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -56,7 +56,7 @@ static void mmci_set_clkreg(struct mmci_host *host, unsigned int desired)
clk = 255;
host->cclk = host->mclk / (2 * (clk + 1));
}
- if (host->hw_designer == 0x80)
+ if (host->hw_designer == AMBA_VENDOR_ST)
clk |= MCI_FCEN; /* Bug fix in ST IP block */
clk |= MCI_CLK_ENABLE;
/* This hasn't proven to be worthwhile */
diff --git a/drivers/mmc/host/pxamci.c b/drivers/mmc/host/pxamci.c
index 9fb480bb0e0..bb47ff465c0 100644
--- a/drivers/mmc/host/pxamci.c
+++ b/drivers/mmc/host/pxamci.c
@@ -43,6 +43,9 @@
#define NR_SG 1
#define CLKRT_OFF (~0)
+#define mmc_has_26MHz() (cpu_is_pxa300() || cpu_is_pxa310() \
+ || cpu_is_pxa935())
+
struct pxamci_host {
struct mmc_host *mmc;
spinlock_t lock;
@@ -457,7 +460,7 @@ static void pxamci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
clk_enable(host->clk);
if (ios->clock == 26000000) {
- /* to support 26MHz on pxa300/pxa310 */
+ /* to support 26MHz */
host->clkrt = 7;
} else {
/* to handle (19.5MHz, 26MHz) */
@@ -608,8 +611,7 @@ static int pxamci_probe(struct platform_device *pdev)
* Calculate minimum clock rate, rounding up.
*/
mmc->f_min = (host->clkrate + 63) / 64;
- mmc->f_max = (cpu_is_pxa300() || cpu_is_pxa310()) ? 26000000
- : host->clkrate;
+ mmc->f_max = (mmc_has_26MHz()) ? 26000000 : host->clkrate;
pxamci_init_ocr(host);
@@ -618,7 +620,7 @@ static int pxamci_probe(struct platform_device *pdev)
if (!cpu_is_pxa25x()) {
mmc->caps |= MMC_CAP_4_BIT_DATA | MMC_CAP_SDIO_IRQ;
host->cmdat |= CMDAT_SDIO_INT_EN;
- if (cpu_is_pxa300() || cpu_is_pxa310())
+ if (mmc_has_26MHz())
mmc->caps |= MMC_CAP_MMC_HIGHSPEED |
MMC_CAP_SD_HIGHSPEED;
}
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index 2fda0b61524..8f8e87b7ed6 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -358,7 +358,7 @@ endchoice
config MTD_NAND_PXA3xx
tristate "Support for NAND flash devices on PXA3xx"
- depends on MTD_NAND && PXA3xx
+ depends on MTD_NAND && (PXA3xx || ARCH_MMP)
help
This enables the driver for the NAND flash device found on
PXA3xx processors
diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c
index 6ea520ae241..1a5a0365c98 100644
--- a/drivers/mtd/nand/pxa3xx_nand.c
+++ b/drivers/mtd/nand/pxa3xx_nand.c
@@ -9,6 +9,7 @@
* published by the Free Software Foundation.
*/
+#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
@@ -22,7 +23,7 @@
#include <linux/irq.h>
#include <mach/dma.h>
-#include <mach/pxa3xx_nand.h>
+#include <plat/pxa3xx_nand.h>
#define CHIP_DELAY_TIMEOUT (2 * HZ/10)
@@ -84,10 +85,6 @@
#define NDCB0_CMD1_MASK (0xff)
#define NDCB0_ADDR_CYC_SHIFT (16)
-/* dma-able I/O address for the NAND data and commands */
-#define NDCB0_DMA_ADDR (0x43100048)
-#define NDDB_DMA_ADDR (0x43100040)
-
/* macros for registers read/write */
#define nand_writel(info, off, val) \
__raw_writel((val), (info)->mmio_base + (off))
@@ -123,6 +120,7 @@ struct pxa3xx_nand_info {
struct clk *clk;
void __iomem *mmio_base;
+ unsigned long mmio_phys;
unsigned int buf_start;
unsigned int buf_count;
@@ -228,13 +226,35 @@ static struct pxa3xx_nand_flash samsung512MbX16 = {
.chip_id = 0x46ec,
};
+static struct pxa3xx_nand_flash samsung2GbX8 = {
+ .timing = &samsung512MbX16_timing,
+ .cmdset = &smallpage_cmdset,
+ .page_per_block = 64,
+ .page_size = 2048,
+ .flash_width = 8,
+ .dfc_width = 8,
+ .num_blocks = 2048,
+ .chip_id = 0xdaec,
+};
+
+static struct pxa3xx_nand_flash samsung32GbX8 = {
+ .timing = &samsung512MbX16_timing,
+ .cmdset = &smallpage_cmdset,
+ .page_per_block = 128,
+ .page_size = 4096,
+ .flash_width = 8,
+ .dfc_width = 8,
+ .num_blocks = 8192,
+ .chip_id = 0xd7ec,
+};
+
static struct pxa3xx_nand_timing micron_timing = {
.tCH = 10,
.tCS = 25,
.tWH = 15,
.tWP = 25,
.tRH = 15,
- .tRP = 25,
+ .tRP = 30,
.tR = 25000,
.tWHR = 60,
.tAR = 10,
@@ -262,6 +282,28 @@ static struct pxa3xx_nand_flash micron1GbX16 = {
.chip_id = 0xb12c,
};
+static struct pxa3xx_nand_flash micron4GbX8 = {
+ .timing = &micron_timing,
+ .cmdset = &largepage_cmdset,
+ .page_per_block = 64,
+ .page_size = 2048,
+ .flash_width = 8,
+ .dfc_width = 8,
+ .num_blocks = 4096,
+ .chip_id = 0xdc2c,
+};
+
+static struct pxa3xx_nand_flash micron4GbX16 = {
+ .timing = &micron_timing,
+ .cmdset = &largepage_cmdset,
+ .page_per_block = 64,
+ .page_size = 2048,
+ .flash_width = 16,
+ .dfc_width = 16,
+ .num_blocks = 4096,
+ .chip_id = 0xcc2c,
+};
+
static struct pxa3xx_nand_timing stm2GbX16_timing = {
.tCH = 10,
.tCS = 35,
@@ -287,8 +329,12 @@ static struct pxa3xx_nand_flash stm2GbX16 = {
static struct pxa3xx_nand_flash *builtin_flash_types[] = {
&samsung512MbX16,
+ &samsung2GbX8,
+ &samsung32GbX8,
&micron1GbX8,
&micron1GbX16,
+ &micron4GbX8,
+ &micron4GbX16,
&stm2GbX16,
};
#endif /* CONFIG_MTD_NAND_PXA3xx_BUILTIN */
@@ -489,7 +535,7 @@ static int handle_data_pio(struct pxa3xx_nand_info *info)
switch (info->state) {
case STATE_PIO_WRITING:
__raw_writesl(info->mmio_base + NDDB, info->data_buff,
- info->data_size << 2);
+ DIV_ROUND_UP(info->data_size, 4));
enable_int(info, NDSR_CS0_BBD | NDSR_CS0_CMDD);
@@ -501,7 +547,7 @@ static int handle_data_pio(struct pxa3xx_nand_info *info)
break;
case STATE_PIO_READING:
__raw_readsl(info->mmio_base + NDDB, info->data_buff,
- info->data_size << 2);
+ DIV_ROUND_UP(info->data_size, 4));
break;
default:
printk(KERN_ERR "%s: invalid state %d\n", __func__,
@@ -523,11 +569,11 @@ static void start_data_dma(struct pxa3xx_nand_info *info, int dir_out)
if (dir_out) {
desc->dsadr = info->data_buff_phys;
- desc->dtadr = NDDB_DMA_ADDR;
+ desc->dtadr = info->mmio_phys + NDDB;
desc->dcmd |= DCMD_INCSRCADDR | DCMD_FLOWTRG;
} else {
desc->dtadr = info->data_buff_phys;
- desc->dsadr = NDDB_DMA_ADDR;
+ desc->dsadr = info->mmio_phys + NDDB;
desc->dcmd |= DCMD_INCTRGADDR | DCMD_FLOWSRC;
}
@@ -669,6 +715,7 @@ static void pxa3xx_nand_cmdfunc(struct mtd_info *mtd, unsigned command,
/* disable HW ECC to get all the OOB data */
info->buf_count = mtd->writesize + mtd->oobsize;
info->buf_start = mtd->writesize + column;
+ memset(info->data_buff, 0xFF, info->buf_count);
if (prepare_read_prog_cmd(info, cmdset->read1, column, page_addr))
break;
@@ -1239,13 +1286,17 @@ static int pxa3xx_nand_probe(struct platform_device *pdev)
ret = -ENODEV;
goto fail_free_res;
}
+ info->mmio_phys = r->start;
ret = pxa3xx_nand_init_buff(info);
if (ret)
goto fail_free_io;
- ret = request_irq(IRQ_NAND, pxa3xx_nand_irq, IRQF_DISABLED,
- pdev->name, info);
+ /* initialize all interrupts to be disabled */
+ disable_int(info, NDSR_MASK);
+
+ ret = request_irq(irq, pxa3xx_nand_irq, IRQF_DISABLED,
+ pdev->name, info);
if (ret < 0) {
dev_err(&pdev->dev, "failed to request IRQ\n");
goto fail_free_buf;
@@ -1271,7 +1322,7 @@ static int pxa3xx_nand_probe(struct platform_device *pdev)
return add_mtd_partitions(mtd, pdata->parts, pdata->nr_parts);
fail_free_irq:
- free_irq(IRQ_NAND, info);
+ free_irq(irq, info);
fail_free_buf:
if (use_dma) {
pxa_free_dma(info->data_dma_ch);
@@ -1296,12 +1347,15 @@ static int pxa3xx_nand_remove(struct platform_device *pdev)
struct mtd_info *mtd = platform_get_drvdata(pdev);
struct pxa3xx_nand_info *info = mtd->priv;
struct resource *r;
+ int irq;
platform_set_drvdata(pdev, NULL);
del_mtd_device(mtd);
del_mtd_partitions(mtd);
- free_irq(IRQ_NAND, info);
+ irq = platform_get_irq(pdev, 0);
+ if (irq >= 0)
+ free_irq(irq, info);
if (use_dma) {
pxa_free_dma(info->data_dma_ch);
dma_free_writecombine(&pdev->dev, info->data_buff_size,
diff --git a/drivers/pcmcia/Kconfig b/drivers/pcmcia/Kconfig
index f3ccbccf5f2..cd5082d3ca1 100644
--- a/drivers/pcmcia/Kconfig
+++ b/drivers/pcmcia/Kconfig
@@ -179,7 +179,7 @@ config PCMCIA_BCM63XX
depends on BCM63XX && PCMCIA
config PCMCIA_SOC_COMMON
- bool
+ tristate
config PCMCIA_SA1100
tristate "SA1100 support"
diff --git a/drivers/pcmcia/sa1100_generic.c b/drivers/pcmcia/sa1100_generic.c
index 11cc3ba1260..8db86b90c20 100644
--- a/drivers/pcmcia/sa1100_generic.c
+++ b/drivers/pcmcia/sa1100_generic.c
@@ -51,7 +51,7 @@ static int (*sa11x0_pcmcia_hw_init[])(struct device *dev) = {
#ifdef CONFIG_SA1100_CERF
pcmcia_cerf_init,
#endif
-#ifdef CONFIG_SA1100_H3600
+#if defined(CONFIG_SA1100_H3100) || defined(CONFIG_SA1100_H3600)
pcmcia_h3600_init,
#endif
#ifdef CONFIG_SA1100_SHANNON
diff --git a/drivers/pcmcia/sa1100_h3600.c b/drivers/pcmcia/sa1100_h3600.c
index 3a121ac697d..56329ad575a 100644
--- a/drivers/pcmcia/sa1100_h3600.c
+++ b/drivers/pcmcia/sa1100_h3600.c
@@ -10,47 +10,139 @@
#include <linux/interrupt.h>
#include <linux/init.h>
#include <linux/delay.h>
+#include <linux/gpio.h>
#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
-#include <mach/h3600.h>
+#include <mach/h3xxx.h>
#include "sa1100_generic.h"
static struct pcmcia_irqs irqs[] = {
- { 0, IRQ_GPIO_H3600_PCMCIA_CD0, "PCMCIA CD0" },
- { 1, IRQ_GPIO_H3600_PCMCIA_CD1, "PCMCIA CD1" }
+ { .sock = 0, .str = "PCMCIA CD0" }, /* .irq will be filled later */
+ { .sock = 1, .str = "PCMCIA CD1" }
};
static int h3600_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
{
- skt->socket.pci_irq = skt->nr ? IRQ_GPIO_H3600_PCMCIA_IRQ1
- : IRQ_GPIO_H3600_PCMCIA_IRQ0;
+ int err;
+ switch (skt->nr) {
+ case 0:
+ err = gpio_request(H3XXX_GPIO_PCMCIA_IRQ0, "PCMCIA IRQ0");
+ if (err)
+ goto err00;
+ err = gpio_direction_input(H3XXX_GPIO_PCMCIA_IRQ0);
+ if (err)
+ goto err01;
+ skt->socket.pci_irq = gpio_to_irq(H3XXX_GPIO_PCMCIA_IRQ0);
+
+ err = gpio_request(H3XXX_GPIO_PCMCIA_CD0, "PCMCIA CD0");
+ if (err)
+ goto err01;
+ err = gpio_direction_input(H3XXX_GPIO_PCMCIA_CD0);
+ if (err)
+ goto err02;
+ irqs[0].irq = gpio_to_irq(H3XXX_GPIO_PCMCIA_CD0);
+
+ err = gpio_request(H3XXX_EGPIO_OPT_NVRAM_ON, "OPT NVRAM ON");
+ if (err)
+ goto err02;
+ err = gpio_direction_output(H3XXX_EGPIO_OPT_NVRAM_ON, 0);
+ if (err)
+ goto err03;
+ err = gpio_request(H3XXX_EGPIO_OPT_ON, "OPT ON");
+ if (err)
+ goto err03;
+ err = gpio_direction_output(H3XXX_EGPIO_OPT_ON, 0);
+ if (err)
+ goto err04;
+ err = gpio_request(H3XXX_EGPIO_OPT_RESET, "OPT RESET");
+ if (err)
+ goto err04;
+ err = gpio_direction_output(H3XXX_EGPIO_OPT_RESET, 0);
+ if (err)
+ goto err05;
+ err = gpio_request(H3XXX_EGPIO_CARD_RESET, "PCMCIA CARD RESET");
+ if (err)
+ goto err05;
+ err = gpio_direction_output(H3XXX_EGPIO_CARD_RESET, 0);
+ if (err)
+ goto err06;
+ err = soc_pcmcia_request_irqs(skt, irqs, ARRAY_SIZE(irqs));
+ if (err)
+ goto err06;
+ break;
+ case 1:
+ err = gpio_request(H3XXX_GPIO_PCMCIA_IRQ1, "PCMCIA IRQ1");
+ if (err)
+ goto err10;
+ err = gpio_direction_input(H3XXX_GPIO_PCMCIA_IRQ1);
+ if (err)
+ goto err11;
+ skt->socket.pci_irq = gpio_to_irq(H3XXX_GPIO_PCMCIA_IRQ1);
+
+ err = gpio_request(H3XXX_GPIO_PCMCIA_CD1, "PCMCIA CD1");
+ if (err)
+ goto err11;
+ err = gpio_direction_input(H3XXX_GPIO_PCMCIA_CD1);
+ if (err)
+ goto err12;
+ irqs[1].irq = gpio_to_irq(H3XXX_GPIO_PCMCIA_CD1);
+
+ err = soc_pcmcia_request_irqs(skt, irqs, ARRAY_SIZE(irqs));
+ if (err)
+ goto err12;
+ break;
+ }
+ return 0;
- return soc_pcmcia_request_irqs(skt, irqs, ARRAY_SIZE(irqs));
+err06: gpio_free(H3XXX_EGPIO_CARD_RESET);
+err05: gpio_free(H3XXX_EGPIO_OPT_RESET);
+err04: gpio_free(H3XXX_EGPIO_OPT_ON);
+err03: gpio_free(H3XXX_EGPIO_OPT_NVRAM_ON);
+err02: gpio_free(H3XXX_GPIO_PCMCIA_CD0);
+err01: gpio_free(H3XXX_GPIO_PCMCIA_IRQ0);
+err00: return err;
+
+err12: gpio_free(H3XXX_GPIO_PCMCIA_CD0);
+err11: gpio_free(H3XXX_GPIO_PCMCIA_IRQ0);
+err10: return err;
}
static void h3600_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt)
{
soc_pcmcia_free_irqs(skt, irqs, ARRAY_SIZE(irqs));
- /* Disable CF bus: */
- assign_h3600_egpio(IPAQ_EGPIO_OPT_NVRAM_ON, 0);
- assign_h3600_egpio(IPAQ_EGPIO_OPT_ON, 0);
- assign_h3600_egpio(IPAQ_EGPIO_OPT_RESET, 1);
+ switch (skt->nr) {
+ case 0:
+ /* Disable CF bus: */
+ gpio_set_value(H3XXX_EGPIO_OPT_NVRAM_ON, 0);
+ gpio_set_value(H3XXX_EGPIO_OPT_ON, 0);
+ gpio_set_value(H3XXX_EGPIO_OPT_RESET, 1);
+
+ gpio_free(H3XXX_EGPIO_CARD_RESET);
+ gpio_free(H3XXX_EGPIO_OPT_RESET);
+ gpio_free(H3XXX_EGPIO_OPT_ON);
+ gpio_free(H3XXX_EGPIO_OPT_NVRAM_ON);
+ gpio_free(H3XXX_GPIO_PCMCIA_CD0);
+ gpio_free(H3XXX_GPIO_PCMCIA_IRQ0);
+ break;
+ case 1:
+ gpio_free(H3XXX_GPIO_PCMCIA_CD1);
+ gpio_free(H3XXX_GPIO_PCMCIA_IRQ1);
+ break;
+ }
}
static void
h3600_pcmcia_socket_state(struct soc_pcmcia_socket *skt, struct pcmcia_state *state)
{
- unsigned long levels = GPLR;
-
switch (skt->nr) {
case 0:
- state->detect = levels & GPIO_H3600_PCMCIA_CD0 ? 0 : 1;
- state->ready = levels & GPIO_H3600_PCMCIA_IRQ0 ? 1 : 0;
+ state->detect = !gpio_get_value(H3XXX_GPIO_PCMCIA_CD0);
+ state->ready = !!gpio_get_value(H3XXX_GPIO_PCMCIA_IRQ0);
state->bvd1 = 0;
state->bvd2 = 0;
state->wrprot = 0; /* Not available on H3600. */
@@ -59,8 +151,8 @@ h3600_pcmcia_socket_state(struct soc_pcmcia_socket *skt, struct pcmcia_state *st
break;
case 1:
- state->detect = levels & GPIO_H3600_PCMCIA_CD1 ? 0 : 1;
- state->ready = levels & GPIO_H3600_PCMCIA_IRQ1 ? 1 : 0;
+ state->detect = !gpio_get_value(H3XXX_GPIO_PCMCIA_CD1);
+ state->ready = !!gpio_get_value(H3XXX_GPIO_PCMCIA_IRQ1);
state->bvd1 = 0;
state->bvd2 = 0;
state->wrprot = 0; /* Not available on H3600. */
@@ -79,7 +171,7 @@ h3600_pcmcia_configure_socket(struct soc_pcmcia_socket *skt, const socket_state_
return -1;
}
- assign_h3600_egpio(IPAQ_EGPIO_CARD_RESET, !!(state->flags & SS_RESET));
+ gpio_set_value(H3XXX_EGPIO_CARD_RESET, !!(state->flags & SS_RESET));
/* Silently ignore Vpp, output enable, speaker enable. */
@@ -89,9 +181,9 @@ h3600_pcmcia_configure_socket(struct soc_pcmcia_socket *skt, const socket_state_
static void h3600_pcmcia_socket_init(struct soc_pcmcia_socket *skt)
{
/* Enable CF bus: */
- assign_h3600_egpio(IPAQ_EGPIO_OPT_NVRAM_ON, 1);
- assign_h3600_egpio(IPAQ_EGPIO_OPT_ON, 1);
- assign_h3600_egpio(IPAQ_EGPIO_OPT_RESET, 0);
+ gpio_set_value(H3XXX_EGPIO_OPT_NVRAM_ON, 1);
+ gpio_set_value(H3XXX_EGPIO_OPT_ON, 1);
+ gpio_set_value(H3XXX_EGPIO_OPT_RESET, 0);
msleep(10);
@@ -109,10 +201,10 @@ static void h3600_pcmcia_socket_suspend(struct soc_pcmcia_socket *skt)
* socket 0 then socket 1.
*/
if (skt->nr == 1) {
- assign_h3600_egpio(IPAQ_EGPIO_OPT_ON, 0);
- assign_h3600_egpio(IPAQ_EGPIO_OPT_NVRAM_ON, 0);
+ gpio_set_value(H3XXX_EGPIO_OPT_ON, 0);
+ gpio_set_value(H3XXX_EGPIO_OPT_NVRAM_ON, 0);
/* hmm, does this suck power? */
- assign_h3600_egpio(IPAQ_EGPIO_OPT_RESET, 1);
+ gpio_set_value(H3XXX_EGPIO_OPT_RESET, 1);
}
}
@@ -131,7 +223,7 @@ int __init pcmcia_h3600_init(struct device *dev)
{
int ret = -ENODEV;
- if (machine_is_h3600())
+ if (machine_is_h3600() || machine_is_h3100())
ret = sa11xx_drv_pcmcia_probe(dev, &h3600_pcmcia_ops, 0, 2);
return ret;
diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig
index cea6cef27e8..11867492551 100644
--- a/drivers/power/Kconfig
+++ b/drivers/power/Kconfig
@@ -77,6 +77,13 @@ config BATTERY_TOSA
Say Y to enable support for the battery on the Sharp Zaurus
SL-6000 (tosa) models.
+config BATTERY_COLLIE
+ tristate "Sharp SL-5500 (collie) battery"
+ depends on SA1100_COLLIE && MCP_UCB1200
+ help
+ Say Y to enable support for the battery on the Sharp Zaurus
+ SL-5500 (collie) models.
+
config BATTERY_WM97XX
bool "WM97xx generic battery driver"
depends on TOUCHSCREEN_WM97XX=y
diff --git a/drivers/power/Makefile b/drivers/power/Makefile
index b96f29d91c2..356cdfd3c8b 100644
--- a/drivers/power/Makefile
+++ b/drivers/power/Makefile
@@ -24,6 +24,7 @@ obj-$(CONFIG_BATTERY_DS2782) += ds2782_battery.o
obj-$(CONFIG_BATTERY_PMU) += pmu_battery.o
obj-$(CONFIG_BATTERY_OLPC) += olpc_battery.o
obj-$(CONFIG_BATTERY_TOSA) += tosa_battery.o
+obj-$(CONFIG_BATTERY_COLLIE) += collie_battery.o
obj-$(CONFIG_BATTERY_WM97XX) += wm97xx_battery.o
obj-$(CONFIG_BATTERY_BQ27x00) += bq27x00_battery.o
obj-$(CONFIG_BATTERY_DA9030) += da9030_battery.o
diff --git a/drivers/power/collie_battery.c b/drivers/power/collie_battery.c
new file mode 100644
index 00000000000..039f41ae217
--- /dev/null
+++ b/drivers/power/collie_battery.c
@@ -0,0 +1,418 @@
+/*
+ * Battery and Power Management code for the Sharp SL-5x00
+ *
+ * Copyright (C) 2009 Thomas Kunze
+ *
+ * based on tosa_battery.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/power_supply.h>
+#include <linux/delay.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/gpio.h>
+#include <linux/mfd/ucb1x00.h>
+
+#include <asm/mach/sharpsl_param.h>
+#include <asm/mach-types.h>
+#include <mach/collie.h>
+
+static DEFINE_MUTEX(bat_lock); /* protects gpio pins */
+static struct work_struct bat_work;
+static struct ucb1x00 *ucb;
+
+struct collie_bat {
+ int status;
+ struct power_supply psy;
+ int full_chrg;
+
+ struct mutex work_lock; /* protects data */
+
+ bool (*is_present)(struct collie_bat *bat);
+ int gpio_full;
+ int gpio_charge_on;
+
+ int technology;
+
+ int gpio_bat;
+ int adc_bat;
+ int adc_bat_divider;
+ int bat_max;
+ int bat_min;
+
+ int gpio_temp;
+ int adc_temp;
+ int adc_temp_divider;
+};
+
+static struct collie_bat collie_bat_main;
+
+static unsigned long collie_read_bat(struct collie_bat *bat)
+{
+ unsigned long value = 0;
+
+ if (bat->gpio_bat < 0 || bat->adc_bat < 0)
+ return 0;
+ mutex_lock(&bat_lock);
+ gpio_set_value(bat->gpio_bat, 1);
+ msleep(5);
+ ucb1x00_adc_enable(ucb);
+ value = ucb1x00_adc_read(ucb, bat->adc_bat, UCB_SYNC);
+ ucb1x00_adc_disable(ucb);
+ gpio_set_value(bat->gpio_bat, 0);
+ mutex_unlock(&bat_lock);
+ value = value * 1000000 / bat->adc_bat_divider;
+
+ return value;
+}
+
+static unsigned long collie_read_temp(struct collie_bat *bat)
+{
+ unsigned long value = 0;
+ if (bat->gpio_temp < 0 || bat->adc_temp < 0)
+ return 0;
+
+ mutex_lock(&bat_lock);
+ gpio_set_value(bat->gpio_temp, 1);
+ msleep(5);
+ ucb1x00_adc_enable(ucb);
+ value = ucb1x00_adc_read(ucb, bat->adc_temp, UCB_SYNC);
+ ucb1x00_adc_disable(ucb);
+ gpio_set_value(bat->gpio_temp, 0);
+ mutex_unlock(&bat_lock);
+
+ value = value * 10000 / bat->adc_temp_divider;
+
+ return value;
+}
+
+static int collie_bat_get_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ int ret = 0;
+ struct collie_bat *bat = container_of(psy, struct collie_bat, psy);
+
+ if (bat->is_present && !bat->is_present(bat)
+ && psp != POWER_SUPPLY_PROP_PRESENT) {
+ return -ENODEV;
+ }
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_STATUS:
+ val->intval = bat->status;
+ break;
+ case POWER_SUPPLY_PROP_TECHNOLOGY:
+ val->intval = bat->technology;
+ break;
+ case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+ val->intval = collie_read_bat(bat);
+ break;
+ case POWER_SUPPLY_PROP_VOLTAGE_MAX:
+ if (bat->full_chrg == -1)
+ val->intval = bat->bat_max;
+ else
+ val->intval = bat->full_chrg;
+ break;
+ case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN:
+ val->intval = bat->bat_max;
+ break;
+ case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN:
+ val->intval = bat->bat_min;
+ break;
+ case POWER_SUPPLY_PROP_TEMP:
+ val->intval = collie_read_temp(bat);
+ break;
+ case POWER_SUPPLY_PROP_PRESENT:
+ val->intval = bat->is_present ? bat->is_present(bat) : 1;
+ break;
+ default:
+ ret = -EINVAL;
+ break;
+ }
+ return ret;
+}
+
+static void collie_bat_external_power_changed(struct power_supply *psy)
+{
+ schedule_work(&bat_work);
+}
+
+static irqreturn_t collie_bat_gpio_isr(int irq, void *data)
+{
+ pr_info("collie_bat_gpio irq: %d\n", gpio_get_value(irq_to_gpio(irq)));
+ schedule_work(&bat_work);
+ return IRQ_HANDLED;
+}
+
+static void collie_bat_update(struct collie_bat *bat)
+{
+ int old;
+ struct power_supply *psy = &bat->psy;
+
+ mutex_lock(&bat->work_lock);
+
+ old = bat->status;
+
+ if (bat->is_present && !bat->is_present(bat)) {
+ printk(KERN_NOTICE "%s not present\n", psy->name);
+ bat->status = POWER_SUPPLY_STATUS_UNKNOWN;
+ bat->full_chrg = -1;
+ } else if (power_supply_am_i_supplied(psy)) {
+ if (bat->status == POWER_SUPPLY_STATUS_DISCHARGING) {
+ gpio_set_value(bat->gpio_charge_on, 1);
+ mdelay(15);
+ }
+
+ if (gpio_get_value(bat->gpio_full)) {
+ if (old == POWER_SUPPLY_STATUS_CHARGING ||
+ bat->full_chrg == -1)
+ bat->full_chrg = collie_read_bat(bat);
+
+ gpio_set_value(bat->gpio_charge_on, 0);
+ bat->status = POWER_SUPPLY_STATUS_FULL;
+ } else {
+ gpio_set_value(bat->gpio_charge_on, 1);
+ bat->status = POWER_SUPPLY_STATUS_CHARGING;
+ }
+ } else {
+ gpio_set_value(bat->gpio_charge_on, 0);
+ bat->status = POWER_SUPPLY_STATUS_DISCHARGING;
+ }
+
+ if (old != bat->status)
+ power_supply_changed(psy);
+
+ mutex_unlock(&bat->work_lock);
+}
+
+static void collie_bat_work(struct work_struct *work)
+{
+ collie_bat_update(&collie_bat_main);
+}
+
+
+static enum power_supply_property collie_bat_main_props[] = {
+ POWER_SUPPLY_PROP_STATUS,
+ POWER_SUPPLY_PROP_TECHNOLOGY,
+ POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN,
+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
+ POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN,
+ POWER_SUPPLY_PROP_VOLTAGE_MAX,
+ POWER_SUPPLY_PROP_PRESENT,
+ POWER_SUPPLY_PROP_TEMP,
+};
+
+static enum power_supply_property collie_bat_bu_props[] = {
+ POWER_SUPPLY_PROP_STATUS,
+ POWER_SUPPLY_PROP_TECHNOLOGY,
+ POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN,
+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
+ POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN,
+ POWER_SUPPLY_PROP_VOLTAGE_MAX,
+ POWER_SUPPLY_PROP_PRESENT,
+};
+
+static struct collie_bat collie_bat_main = {
+ .status = POWER_SUPPLY_STATUS_DISCHARGING,
+ .full_chrg = -1,
+ .psy = {
+ .name = "main-battery",
+ .type = POWER_SUPPLY_TYPE_BATTERY,
+ .properties = collie_bat_main_props,
+ .num_properties = ARRAY_SIZE(collie_bat_main_props),
+ .get_property = collie_bat_get_property,
+ .external_power_changed = collie_bat_external_power_changed,
+ .use_for_apm = 1,
+ },
+
+ .gpio_full = COLLIE_GPIO_CO,
+ .gpio_charge_on = COLLIE_GPIO_CHARGE_ON,
+
+ .technology = POWER_SUPPLY_TECHNOLOGY_LIPO,
+
+ .gpio_bat = COLLIE_GPIO_MBAT_ON,
+ .adc_bat = UCB_ADC_INP_AD1,
+ .adc_bat_divider = 155,
+ .bat_max = 4310000,
+ .bat_min = 1551 * 1000000 / 414,
+
+ .gpio_temp = COLLIE_GPIO_TMP_ON,
+ .adc_temp = UCB_ADC_INP_AD0,
+ .adc_temp_divider = 10000,
+};
+
+static struct collie_bat collie_bat_bu = {
+ .status = POWER_SUPPLY_STATUS_UNKNOWN,
+ .full_chrg = -1,
+
+ .psy = {
+ .name = "backup-battery",
+ .type = POWER_SUPPLY_TYPE_BATTERY,
+ .properties = collie_bat_bu_props,
+ .num_properties = ARRAY_SIZE(collie_bat_bu_props),
+ .get_property = collie_bat_get_property,
+ .external_power_changed = collie_bat_external_power_changed,
+ },
+
+ .gpio_full = -1,
+ .gpio_charge_on = -1,
+
+ .technology = POWER_SUPPLY_TECHNOLOGY_LiMn,
+
+ .gpio_bat = COLLIE_GPIO_BBAT_ON,
+ .adc_bat = UCB_ADC_INP_AD1,
+ .adc_bat_divider = 155,
+ .bat_max = 3000000,
+ .bat_min = 1900000,
+
+ .gpio_temp = -1,
+ .adc_temp = -1,
+ .adc_temp_divider = -1,
+};
+
+static struct {
+ int gpio;
+ char *name;
+ bool output;
+ int value;
+} gpios[] = {
+ { COLLIE_GPIO_CO, "main battery full", 0, 0 },
+ { COLLIE_GPIO_MAIN_BAT_LOW, "main battery low", 0, 0 },
+ { COLLIE_GPIO_CHARGE_ON, "main charge on", 1, 0 },
+ { COLLIE_GPIO_MBAT_ON, "main battery", 1, 0 },
+ { COLLIE_GPIO_TMP_ON, "main battery temp", 1, 0 },
+ { COLLIE_GPIO_BBAT_ON, "backup battery", 1, 0 },
+};
+
+#ifdef CONFIG_PM
+static int collie_bat_suspend(struct ucb1x00_dev *dev, pm_message_t state)
+{
+ /* flush all pending status updates */
+ flush_scheduled_work();
+ return 0;
+}
+
+static int collie_bat_resume(struct ucb1x00_dev *dev)
+{
+ /* things may have changed while we were away */
+ schedule_work(&bat_work);
+ return 0;
+}
+#else
+#define collie_bat_suspend NULL
+#define collie_bat_resume NULL
+#endif
+
+static int __devinit collie_bat_probe(struct ucb1x00_dev *dev)
+{
+ int ret;
+ int i;
+
+ if (!machine_is_collie())
+ return -ENODEV;
+
+ ucb = dev->ucb;
+
+ for (i = 0; i < ARRAY_SIZE(gpios); i++) {
+ ret = gpio_request(gpios[i].gpio, gpios[i].name);
+ if (ret) {
+ i--;
+ goto err_gpio;
+ }
+
+ if (gpios[i].output)
+ ret = gpio_direction_output(gpios[i].gpio,
+ gpios[i].value);
+ else
+ ret = gpio_direction_input(gpios[i].gpio);
+
+ if (ret)
+ goto err_gpio;
+ }
+
+ mutex_init(&collie_bat_main.work_lock);
+
+ INIT_WORK(&bat_work, collie_bat_work);
+
+ ret = power_supply_register(&dev->ucb->dev, &collie_bat_main.psy);
+ if (ret)
+ goto err_psy_reg_main;
+ ret = power_supply_register(&dev->ucb->dev, &collie_bat_bu.psy);
+ if (ret)
+ goto err_psy_reg_bu;
+
+ ret = request_irq(gpio_to_irq(COLLIE_GPIO_CO),
+ collie_bat_gpio_isr,
+ IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+ "main full", &collie_bat_main);
+ if (!ret) {
+ schedule_work(&bat_work);
+ return 0;
+ }
+ power_supply_unregister(&collie_bat_bu.psy);
+err_psy_reg_bu:
+ power_supply_unregister(&collie_bat_main.psy);
+err_psy_reg_main:
+
+ /* see comment in collie_bat_remove */
+ flush_scheduled_work();
+
+ i--;
+err_gpio:
+ for (; i >= 0; i--)
+ gpio_free(gpios[i].gpio);
+
+ return ret;
+}
+
+static void __devexit collie_bat_remove(struct ucb1x00_dev *dev)
+{
+ int i;
+
+ free_irq(gpio_to_irq(COLLIE_GPIO_CO), &collie_bat_main);
+
+ power_supply_unregister(&collie_bat_bu.psy);
+ power_supply_unregister(&collie_bat_main.psy);
+
+ /*
+ * now flush all pending work.
+ * we won't get any more schedules, since all
+ * sources (isr and external_power_changed)
+ * are unregistered now.
+ */
+ flush_scheduled_work();
+
+ for (i = ARRAY_SIZE(gpios) - 1; i >= 0; i--)
+ gpio_free(gpios[i].gpio);
+}
+
+static struct ucb1x00_driver collie_bat_driver = {
+ .add = collie_bat_probe,
+ .remove = __devexit_p(collie_bat_remove),
+ .suspend = collie_bat_suspend,
+ .resume = collie_bat_resume,
+};
+
+static int __init collie_bat_init(void)
+{
+ return ucb1x00_register_driver(&collie_bat_driver);
+}
+
+static void __exit collie_bat_exit(void)
+{
+ ucb1x00_unregister_driver(&collie_bat_driver);
+}
+
+module_init(collie_bat_init);
+module_exit(collie_bat_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Thomas Kunze");
+MODULE_DESCRIPTION("Collie battery driver");
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index 3c20dae43ce..e11e1cda4ba 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -780,7 +780,7 @@ config RTC_DRV_TX4939
config RTC_DRV_MV
tristate "Marvell SoC RTC"
- depends on ARCH_KIRKWOOD
+ depends on ARCH_KIRKWOOD || ARCH_DOVE
help
If you say yes here you will get support for the in-chip RTC
that can be found in some of Marvell's SoC devices, such as
diff --git a/drivers/serial/s3c2410.c b/drivers/serial/s3c2410.c
index c99f0821cae..73f089d3efd 100644
--- a/drivers/serial/s3c2410.c
+++ b/drivers/serial/s3c2410.c
@@ -2,7 +2,7 @@
*
* Driver for Samsung S3C2410 SoC onboard UARTs.
*
- * Ben Dooks, Copyright (c) 2003-2005,2008 Simtec Electronics
+ * Ben Dooks, Copyright (c) 2003-2008 Simtec Electronics
* http://armlinux.simtec.co.uk/
*
* This program is free software; you can redistribute it and/or modify
diff --git a/drivers/serial/s3c2412.c b/drivers/serial/s3c2412.c
index 6e057d8809d..ce75e28e36e 100644
--- a/drivers/serial/s3c2412.c
+++ b/drivers/serial/s3c2412.c
@@ -2,7 +2,7 @@
*
* Driver for Samsung S3C2412 and S3C2413 SoC onboard UARTs.
*
- * Ben Dooks, Copyright (c) 2003-2005,2008 Simtec Electronics
+ * Ben Dooks, Copyright (c) 2003-2008 Simtec Electronics
* http://armlinux.simtec.co.uk/
*
* This program is free software; you can redistribute it and/or modify
diff --git a/drivers/serial/s3c2440.c b/drivers/serial/s3c2440.c
index 69ff5d340f0..094cc3904b1 100644
--- a/drivers/serial/s3c2440.c
+++ b/drivers/serial/s3c2440.c
@@ -2,7 +2,7 @@
*
* Driver for Samsung S3C2440 and S3C2442 SoC onboard UARTs.
*
- * Ben Dooks, Copyright (c) 2003-2005,2008 Simtec Electronics
+ * Ben Dooks, Copyright (c) 2003-2008 Simtec Electronics
* http://armlinux.simtec.co.uk/
*
* This program is free software; you can redistribute it and/or modify
diff --git a/drivers/serial/s3c24a0.c b/drivers/serial/s3c24a0.c
index 26c49e18bdd..fad6083ca42 100644
--- a/drivers/serial/s3c24a0.c
+++ b/drivers/serial/s3c24a0.c
@@ -6,7 +6,7 @@
*
* Author: Sandeep Patil <sandeep.patil@azingo.com>
*
- * Ben Dooks, Copyright (c) 2003-2005,2008 Simtec Electronics
+ * Ben Dooks, Copyright (c) 2003-2008 Simtec Electronics
* http://armlinux.simtec.co.uk/
*
* This program is free software; you can redistribute it and/or modify
diff --git a/drivers/serial/samsung.c b/drivers/serial/samsung.c
index 1523e8d9ae7..52e3df113ec 100644
--- a/drivers/serial/samsung.c
+++ b/drivers/serial/samsung.c
@@ -2,7 +2,7 @@
*
* Driver core for Samsung SoC onboard UARTs.
*
- * Ben Dooks, Copyright (c) 2003-2005,2008 Simtec Electronics
+ * Ben Dooks, Copyright (c) 2003-2008 Simtec Electronics
* http://armlinux.simtec.co.uk/
*
* This program is free software; you can redistribute it and/or modify
diff --git a/drivers/serial/samsung.h b/drivers/serial/samsung.h
index d3fe315969f..1fb22343df4 100644
--- a/drivers/serial/samsung.h
+++ b/drivers/serial/samsung.h
@@ -2,7 +2,7 @@
*
* Driver for Samsung SoC onboard UARTs.
*
- * Ben Dooks, Copyright (c) 2003-2005,2008 Simtec Electronics
+ * Ben Dooks, Copyright (c) 2003-2008 Simtec Electronics
* http://armlinux.simtec.co.uk/
*
* This program is free software; you can redistribute it and/or modify
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 188e1ba3b69..6b89eb55ed3 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -5,6 +5,9 @@
menu "Graphics support"
depends on HAS_IOMEM
+config HAVE_FB_ATMEL
+ bool
+
source "drivers/char/agp/Kconfig"
source "drivers/gpu/vga/Kconfig"
@@ -937,7 +940,7 @@ config FB_S1D13XXX
config FB_ATMEL
tristate "AT91/AT32 LCD Controller support"
- depends on FB && (ARCH_AT91SAM9261 || ARCH_AT91SAM9G10 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || ARCH_AT91SAM9G45 || ARCH_AT91CAP9 || AVR32)
+ depends on FB && HAVE_FB_ATMEL
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
diff --git a/drivers/video/backlight/da903x_bl.c b/drivers/video/backlight/da903x_bl.c
index 701a1081e19..7fcb0eb54c6 100644
--- a/drivers/video/backlight/da903x_bl.c
+++ b/drivers/video/backlight/da903x_bl.c
@@ -25,6 +25,7 @@
#define DA9034_WLED_CONTROL1 0x3C
#define DA9034_WLED_CONTROL2 0x3D
+#define DA9034_WLED_ISET(x) ((x) & 0x1f)
#define DA9034_WLED_BOOST_EN (1 << 5)
@@ -101,6 +102,7 @@ static struct backlight_ops da903x_backlight_ops = {
static int da903x_backlight_probe(struct platform_device *pdev)
{
+ struct da9034_backlight_pdata *pdata = pdev->dev.platform_data;
struct da903x_backlight_data *data;
struct backlight_device *bl;
int max_brightness;
@@ -127,6 +129,11 @@ static int da903x_backlight_probe(struct platform_device *pdev)
data->da903x_dev = pdev->dev.parent;
data->current_brightness = 0;
+ /* adjust the WLED output current */
+ if (pdata)
+ da903x_write(data->da903x_dev, DA9034_WLED_CONTROL2,
+ DA9034_WLED_ISET(pdata->output_current));
+
bl = backlight_device_register(pdev->name, data->da903x_dev,
data, &da903x_backlight_ops);
if (IS_ERR(bl)) {
diff --git a/drivers/video/backlight/tdo24m.c b/drivers/video/backlight/tdo24m.c
index bbfb502add6..4a3d46e0801 100644
--- a/drivers/video/backlight/tdo24m.c
+++ b/drivers/video/backlight/tdo24m.c
@@ -367,6 +367,7 @@ static int __devinit tdo24m_probe(struct spi_device *spi)
spi_message_init(m);
+ x->cs_change = 1;
x->tx_buf = &lcd->buf[0];
spi_message_add_tail(x, m);
diff --git a/drivers/video/pxa168fb.c b/drivers/video/pxa168fb.c
index 84d8327e47d..75285d3f393 100644
--- a/drivers/video/pxa168fb.c
+++ b/drivers/video/pxa168fb.c
@@ -687,6 +687,7 @@ static int __init pxa168fb_probe(struct platform_device *pdev)
}
info->fix.smem_start = (unsigned long)fbi->fb_start_dma;
+ set_graphics_start(info, 0, 0);
/*
* Set video mode according to platform data.
diff --git a/drivers/video/pxafb.c b/drivers/video/pxafb.c
index 1820c4a2443..f58a3aae6ea 100644
--- a/drivers/video/pxafb.c
+++ b/drivers/video/pxafb.c
@@ -80,7 +80,8 @@
static int pxafb_activate_var(struct fb_var_screeninfo *var,
struct pxafb_info *);
static void set_ctrlr_state(struct pxafb_info *fbi, u_int state);
-static void setup_base_frame(struct pxafb_info *fbi, int branch);
+static void setup_base_frame(struct pxafb_info *fbi,
+ struct fb_var_screeninfo *var, int branch);
static int setup_frame_dma(struct pxafb_info *fbi, int dma, int pal,
unsigned long offset, size_t size);
@@ -397,6 +398,7 @@ static void pxafb_setmode(struct fb_var_screeninfo *var,
var->lower_margin = mode->lower_margin;
var->sync = mode->sync;
var->grayscale = mode->cmap_greyscale;
+ var->transp.length = mode->transparency;
/* set the initial RGBA bitfields */
pxafb_set_pixfmt(var, mode->depth);
@@ -531,12 +533,22 @@ static int pxafb_pan_display(struct fb_var_screeninfo *var,
struct fb_info *info)
{
struct pxafb_info *fbi = (struct pxafb_info *)info;
+ struct fb_var_screeninfo newvar;
int dma = DMA_MAX + DMA_BASE;
if (fbi->state != C_ENABLE)
return 0;
- setup_base_frame(fbi, 1);
+ /* Only take .xoffset, .yoffset and .vmode & FB_VMODE_YWRAP from what
+ * was passed in and copy the rest from the old screeninfo.
+ */
+ memcpy(&newvar, &fbi->fb.var, sizeof(newvar));
+ newvar.xoffset = var->xoffset;
+ newvar.yoffset = var->yoffset;
+ newvar.vmode &= ~FB_VMODE_YWRAP;
+ newvar.vmode |= var->vmode & FB_VMODE_YWRAP;
+
+ setup_base_frame(fbi, &newvar, 1);
if (fbi->lccr0 & LCCR0_SDS)
lcd_writel(fbi, FBR1, fbi->fdadr[dma + 1] | 0x1);
@@ -1052,9 +1064,10 @@ static int setup_frame_dma(struct pxafb_info *fbi, int dma, int pal,
return 0;
}
-static void setup_base_frame(struct pxafb_info *fbi, int branch)
+static void setup_base_frame(struct pxafb_info *fbi,
+ struct fb_var_screeninfo *var,
+ int branch)
{
- struct fb_var_screeninfo *var = &fbi->fb.var;
struct fb_fix_screeninfo *fix = &fbi->fb.fix;
int nbytes, dma, pal, bpp = var->bits_per_pixel;
unsigned long offset;
@@ -1332,7 +1345,7 @@ static int pxafb_activate_var(struct fb_var_screeninfo *var,
#endif
setup_parallel_timing(fbi, var);
- setup_base_frame(fbi, 0);
+ setup_base_frame(fbi, var, 0);
fbi->reg_lccr0 = fbi->lccr0 |
(LCCR0_LDM | LCCR0_SFM | LCCR0_IUM | LCCR0_EFM |