diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/net/ixgbe/ixgbe_82598.c | 49 | ||||
| -rw-r--r-- | drivers/net/ixgbe/ixgbe_82599.c | 135 | ||||
| -rw-r--r-- | drivers/net/ixgbe/ixgbe_ethtool.c | 4 | ||||
| -rw-r--r-- | drivers/net/ixgbe/ixgbe_main.c | 17 | ||||
| -rw-r--r-- | drivers/net/ixgbe/ixgbe_type.h | 7 |
5 files changed, 67 insertions, 145 deletions
diff --git a/drivers/net/ixgbe/ixgbe_82598.c b/drivers/net/ixgbe/ixgbe_82598.c index 916430f2a7e..cb7f0c3c6e1 100644 --- a/drivers/net/ixgbe/ixgbe_82598.c +++ b/drivers/net/ixgbe/ixgbe_82598.c @@ -41,8 +41,7 @@ static s32 ixgbe_get_copper_link_capabilities_82598(struct ixgbe_hw *hw, ixgbe_link_speed *speed, bool *autoneg); -static s32 ixgbe_setup_copper_link_82598(struct ixgbe_hw *hw); -static s32 ixgbe_setup_copper_link_speed_82598(struct ixgbe_hw *hw, +static s32 ixgbe_setup_copper_link_82598(struct ixgbe_hw *hw, ixgbe_link_speed speed, bool autoneg, bool autoneg_wait_to_complete); @@ -156,8 +155,6 @@ static s32 ixgbe_init_phy_ops_82598(struct ixgbe_hw *hw) /* Overwrite the link function pointers if copper PHY */ if (mac->ops.get_media_type(hw) == ixgbe_media_type_copper) { mac->ops.setup_link = &ixgbe_setup_copper_link_82598; - mac->ops.setup_link_speed = - &ixgbe_setup_copper_link_speed_82598; mac->ops.get_link_capabilities = &ixgbe_get_copper_link_capabilities_82598; } @@ -465,13 +462,14 @@ out: } /** - * ixgbe_setup_mac_link_82598 - Configures MAC link settings + * ixgbe_start_mac_link_82598 - Configures MAC link settings * @hw: pointer to hardware structure * * Configures link settings based on values in the ixgbe_hw struct. * Restarts the link. Performs autonegotiation if needed. **/ -static s32 ixgbe_setup_mac_link_82598(struct ixgbe_hw *hw) +static s32 ixgbe_start_mac_link_82598(struct ixgbe_hw *hw, + bool autoneg_wait_to_complete) { u32 autoc_reg; u32 links_reg; @@ -484,7 +482,7 @@ static s32 ixgbe_setup_mac_link_82598(struct ixgbe_hw *hw) IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc_reg); /* Only poll for autoneg to complete if specified to do so */ - if (hw->phy.autoneg_wait_to_complete) { + if (autoneg_wait_to_complete) { if ((autoc_reg & IXGBE_AUTOC_LMS_MASK) == IXGBE_AUTOC_LMS_KX4_AN || (autoc_reg & IXGBE_AUTOC_LMS_MASK) == @@ -600,7 +598,7 @@ out: /** - * ixgbe_setup_mac_link_speed_82598 - Set MAC link speed + * ixgbe_setup_mac_link_82598 - Set MAC link speed * @hw: pointer to hardware structure * @speed: new link speed * @autoneg: true if auto-negotiation enabled @@ -608,7 +606,7 @@ out: * * Set the link speed in the AUTOC register and restarts link. **/ -static s32 ixgbe_setup_mac_link_speed_82598(struct ixgbe_hw *hw, +static s32 ixgbe_setup_mac_link_82598(struct ixgbe_hw *hw, ixgbe_link_speed speed, bool autoneg, bool autoneg_wait_to_complete) { @@ -638,14 +636,12 @@ static s32 ixgbe_setup_mac_link_speed_82598(struct ixgbe_hw *hw, } if (status == 0) { - hw->phy.autoneg_wait_to_complete = autoneg_wait_to_complete; - /* * Setup and restart the link based on the new values in * ixgbe_hw This will write the AUTOC register based on the new * stored values */ - status = ixgbe_setup_mac_link_82598(hw); + status = ixgbe_start_mac_link_82598(hw, autoneg_wait_to_complete); } return status; @@ -653,29 +649,7 @@ static s32 ixgbe_setup_mac_link_speed_82598(struct ixgbe_hw *hw, /** - * ixgbe_setup_copper_link_82598 - Setup copper link settings - * @hw: pointer to hardware structure - * - * Configures link settings based on values in the ixgbe_hw struct. - * Restarts the link. Performs autonegotiation if needed. Restart - * phy and wait for autonegotiate to finish. Then synchronize the - * MAC and PHY. - **/ -static s32 ixgbe_setup_copper_link_82598(struct ixgbe_hw *hw) -{ - s32 status; - - /* Restart autonegotiation on PHY */ - status = hw->phy.ops.setup_link(hw); - - /* Set up MAC */ - ixgbe_setup_mac_link_82598(hw); - - return status; -} - -/** - * ixgbe_setup_copper_link_speed_82598 - Set the PHY autoneg advertised field + * ixgbe_setup_copper_link_82598 - Set the PHY autoneg advertised field * @hw: pointer to hardware structure * @speed: new link speed * @autoneg: true if autonegotiation enabled @@ -683,7 +657,7 @@ static s32 ixgbe_setup_copper_link_82598(struct ixgbe_hw *hw) * * Sets the link speed in the AUTOC register in the MAC and restarts link. **/ -static s32 ixgbe_setup_copper_link_speed_82598(struct ixgbe_hw *hw, +static s32 ixgbe_setup_copper_link_82598(struct ixgbe_hw *hw, ixgbe_link_speed speed, bool autoneg, bool autoneg_wait_to_complete) @@ -695,7 +669,7 @@ static s32 ixgbe_setup_copper_link_speed_82598(struct ixgbe_hw *hw, autoneg_wait_to_complete); /* Set up MAC */ - ixgbe_setup_mac_link_82598(hw); + ixgbe_start_mac_link_82598(hw, autoneg_wait_to_complete); return status; } @@ -1163,7 +1137,6 @@ static struct ixgbe_mac_operations mac_ops_82598 = { .read_analog_reg8 = &ixgbe_read_analog_reg8_82598, .write_analog_reg8 = &ixgbe_write_analog_reg8_82598, .setup_link = &ixgbe_setup_mac_link_82598, - .setup_link_speed = &ixgbe_setup_mac_link_speed_82598, .check_link = &ixgbe_check_mac_link_82598, .get_link_capabilities = &ixgbe_get_link_capabilities_82598, .led_on = &ixgbe_led_on_generic, diff --git a/drivers/net/ixgbe/ixgbe_82599.c b/drivers/net/ixgbe/ixgbe_82599.c index 364b6d2279e..5ee56085526 100644 --- a/drivers/net/ixgbe/ixgbe_82599.c +++ b/drivers/net/ixgbe/ixgbe_82599.c @@ -38,23 +38,23 @@ #define IXGBE_82599_MC_TBL_SIZE 128 #define IXGBE_82599_VFT_TBL_SIZE 128 -static s32 ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw); -static s32 ixgbe_setup_mac_link_speed_multispeed_fiber(struct ixgbe_hw *hw, - ixgbe_link_speed speed, bool autoneg, - bool autoneg_wait_to_complete); -static s32 ixgbe_setup_mac_link_82599(struct ixgbe_hw *hw); -static s32 ixgbe_setup_mac_link_speed_82599(struct ixgbe_hw *hw, - ixgbe_link_speed speed, - bool autoneg, - bool autoneg_wait_to_complete); +s32 ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw, + ixgbe_link_speed speed, + bool autoneg, + bool autoneg_wait_to_complete); +s32 ixgbe_start_mac_link_82599(struct ixgbe_hw *hw, + bool autoneg_wait_to_complete); +s32 ixgbe_setup_mac_link_82599(struct ixgbe_hw *hw, + ixgbe_link_speed speed, + bool autoneg, + bool autoneg_wait_to_complete); static s32 ixgbe_get_copper_link_capabilities_82599(struct ixgbe_hw *hw, ixgbe_link_speed *speed, bool *autoneg); -static s32 ixgbe_setup_copper_link_82599(struct ixgbe_hw *hw); -static s32 ixgbe_setup_copper_link_speed_82599(struct ixgbe_hw *hw, - ixgbe_link_speed speed, - bool autoneg, - bool autoneg_wait_to_complete); +static s32 ixgbe_setup_copper_link_82599(struct ixgbe_hw *hw, + ixgbe_link_speed speed, + bool autoneg, + bool autoneg_wait_to_complete); static s32 ixgbe_verify_fw_version_82599(struct ixgbe_hw *hw); static void ixgbe_init_mac_link_ops_82599(struct ixgbe_hw *hw) @@ -62,15 +62,9 @@ static void ixgbe_init_mac_link_ops_82599(struct ixgbe_hw *hw) struct ixgbe_mac_info *mac = &hw->mac; if (hw->phy.multispeed_fiber) { /* Set up dual speed SFP+ support */ - mac->ops.setup_link = - &ixgbe_setup_mac_link_multispeed_fiber; - mac->ops.setup_link_speed = - &ixgbe_setup_mac_link_speed_multispeed_fiber; + mac->ops.setup_link = &ixgbe_setup_mac_link_multispeed_fiber; } else { - mac->ops.setup_link = - &ixgbe_setup_mac_link_82599; - mac->ops.setup_link_speed = - &ixgbe_setup_mac_link_speed_82599; + mac->ops.setup_link = &ixgbe_setup_mac_link_82599; } } @@ -178,8 +172,6 @@ static s32 ixgbe_init_phy_ops_82599(struct ixgbe_hw *hw) /* If copper media, overwrite with copper function pointers */ if (mac->ops.get_media_type(hw) == ixgbe_media_type_copper) { mac->ops.setup_link = &ixgbe_setup_copper_link_82599; - mac->ops.setup_link_speed = - &ixgbe_setup_copper_link_speed_82599; mac->ops.get_link_capabilities = &ixgbe_get_copper_link_capabilities_82599; } @@ -354,13 +346,15 @@ out: } /** - * ixgbe_setup_mac_link_82599 - Setup MAC link settings + * ixgbe_start_mac_link_82599 - Setup MAC link settings * @hw: pointer to hardware structure + * @autoneg_wait_to_complete: true when waiting for completion is needed * * Configures link settings based on values in the ixgbe_hw struct. * Restarts the link. Performs autonegotiation if needed. **/ -static s32 ixgbe_setup_mac_link_82599(struct ixgbe_hw *hw) +s32 ixgbe_start_mac_link_82599(struct ixgbe_hw *hw, + bool autoneg_wait_to_complete) { u32 autoc_reg; u32 links_reg; @@ -373,7 +367,7 @@ static s32 ixgbe_setup_mac_link_82599(struct ixgbe_hw *hw) IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc_reg); /* Only poll for autoneg to complete if specified to do so */ - if (hw->phy.autoneg_wait_to_complete) { + if (autoneg_wait_to_complete) { if ((autoc_reg & IXGBE_AUTOC_LMS_MASK) == IXGBE_AUTOC_LMS_KX4_KX_KR || (autoc_reg & IXGBE_AUTOC_LMS_MASK) == @@ -401,25 +395,7 @@ static s32 ixgbe_setup_mac_link_82599(struct ixgbe_hw *hw) } /** - * ixgbe_setup_mac_link_multispeed_fiber - Setup MAC link settings - * @hw: pointer to hardware structure - * - * Configures link settings based on values in the ixgbe_hw struct. - * Restarts the link for multi-speed fiber at 1G speed, if link - * fails at 10G. - * Performs autonegotiation if needed. - **/ -static s32 ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw) -{ - s32 status = 0; - ixgbe_link_speed link_speed = IXGBE_LINK_SPEED_82599_AUTONEG; - status = ixgbe_setup_mac_link_speed_multispeed_fiber(hw, link_speed, - true, true); - return status; -} - -/** - * ixgbe_setup_mac_link_speed_multispeed_fiber - Set MAC link speed + * ixgbe_setup_mac_link_multispeed_fiber - Set MAC link speed * @hw: pointer to hardware structure * @speed: new link speed * @autoneg: true if autonegotiation enabled @@ -427,10 +403,10 @@ static s32 ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw) * * Set the link speed in the AUTOC register and restarts link. **/ -static s32 ixgbe_setup_mac_link_speed_multispeed_fiber(struct ixgbe_hw *hw, - ixgbe_link_speed speed, - bool autoneg, - bool autoneg_wait_to_complete) +s32 ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw, + ixgbe_link_speed speed, + bool autoneg, + bool autoneg_wait_to_complete) { s32 status = 0; ixgbe_link_speed phy_link_speed; @@ -485,10 +461,10 @@ static s32 ixgbe_setup_mac_link_speed_multispeed_fiber(struct ixgbe_hw *hw, /* Allow module to change analog characteristics (1G->10G) */ msleep(40); - status = ixgbe_setup_mac_link_speed_82599(hw, - IXGBE_LINK_SPEED_10GB_FULL, - autoneg, - autoneg_wait_to_complete); + status = ixgbe_setup_mac_link_82599(hw, + IXGBE_LINK_SPEED_10GB_FULL, + autoneg, + autoneg_wait_to_complete); if (status != 0) goto out; @@ -539,7 +515,7 @@ static s32 ixgbe_setup_mac_link_speed_multispeed_fiber(struct ixgbe_hw *hw, /* Allow module to change analog characteristics (10G->1G) */ msleep(40); - status = ixgbe_setup_mac_link_speed_82599(hw, + status = ixgbe_setup_mac_link_82599(hw, IXGBE_LINK_SPEED_1GB_FULL, autoneg, autoneg_wait_to_complete); @@ -576,10 +552,10 @@ static s32 ixgbe_setup_mac_link_speed_multispeed_fiber(struct ixgbe_hw *hw, * single highest speed that the user requested. */ if (speedcnt > 1) - status = ixgbe_setup_mac_link_speed_multispeed_fiber(hw, - highest_link_speed, - autoneg, - autoneg_wait_to_complete); + status = ixgbe_setup_mac_link_multispeed_fiber(hw, + highest_link_speed, + autoneg, + autoneg_wait_to_complete); out: return status; @@ -640,7 +616,7 @@ static s32 ixgbe_check_mac_link_82599(struct ixgbe_hw *hw, } /** - * ixgbe_setup_mac_link_speed_82599 - Set MAC link speed + * ixgbe_setup_mac_link_82599 - Set MAC link speed * @hw: pointer to hardware structure * @speed: new link speed * @autoneg: true if autonegotiation enabled @@ -648,10 +624,9 @@ static s32 ixgbe_check_mac_link_82599(struct ixgbe_hw *hw, * * Set the link speed in the AUTOC register and restarts link. **/ -static s32 ixgbe_setup_mac_link_speed_82599(struct ixgbe_hw *hw, - ixgbe_link_speed speed, - bool autoneg, - bool autoneg_wait_to_complete) +s32 ixgbe_setup_mac_link_82599(struct ixgbe_hw *hw, + ixgbe_link_speed speed, bool autoneg, + bool autoneg_wait_to_complete) { s32 status = 0; u32 autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC); @@ -751,26 +726,7 @@ out: } /** - * ixgbe_setup_copper_link_82599 - Setup copper link settings - * @hw: pointer to hardware structure - * - * Restarts the link on PHY and then MAC. Performs autonegotiation if needed. - **/ -static s32 ixgbe_setup_copper_link_82599(struct ixgbe_hw *hw) -{ - s32 status; - - /* Restart autonegotiation on PHY */ - status = hw->phy.ops.setup_link(hw); - - /* Set up MAC */ - ixgbe_setup_mac_link_82599(hw); - - return status; -} - -/** - * ixgbe_setup_copper_link_speed_82599 - Set the PHY autoneg advertised field + * ixgbe_setup_copper_link_82599 - Set the PHY autoneg advertised field * @hw: pointer to hardware structure * @speed: new link speed * @autoneg: true if autonegotiation enabled @@ -778,10 +734,10 @@ static s32 ixgbe_setup_copper_link_82599(struct ixgbe_hw *hw) * * Restarts link on PHY and MAC based on settings passed in. **/ -static s32 ixgbe_setup_copper_link_speed_82599(struct ixgbe_hw *hw, - ixgbe_link_speed speed, - bool autoneg, - bool autoneg_wait_to_complete) +static s32 ixgbe_setup_copper_link_82599(struct ixgbe_hw *hw, + ixgbe_link_speed speed, + bool autoneg, + bool autoneg_wait_to_complete) { s32 status; @@ -789,7 +745,7 @@ static s32 ixgbe_setup_copper_link_speed_82599(struct ixgbe_hw *hw, status = hw->phy.ops.setup_link_speed(hw, speed, autoneg, autoneg_wait_to_complete); /* Set up MAC */ - ixgbe_setup_mac_link_82599(hw); + ixgbe_start_mac_link_82599(hw, autoneg_wait_to_complete); return status; } @@ -2470,7 +2426,6 @@ static struct ixgbe_mac_operations mac_ops_82599 = { .read_analog_reg8 = &ixgbe_read_analog_reg8_82599, .write_analog_reg8 = &ixgbe_write_analog_reg8_82599, .setup_link = &ixgbe_setup_mac_link_82599, - .setup_link_speed = &ixgbe_setup_mac_link_speed_82599, .check_link = &ixgbe_check_mac_link_82599, .get_link_capabilities = &ixgbe_get_link_capabilities_82599, .led_on = &ixgbe_led_on_generic, diff --git a/drivers/net/ixgbe/ixgbe_ethtool.c b/drivers/net/ixgbe/ixgbe_ethtool.c index 1444ec51253..026e94a9984 100644 --- a/drivers/net/ixgbe/ixgbe_ethtool.c +++ b/drivers/net/ixgbe/ixgbe_ethtool.c @@ -233,11 +233,11 @@ static int ixgbe_set_settings(struct net_device *netdev, return err; /* this sets the link speed and restarts auto-neg */ hw->mac.autotry_restart = true; - err = hw->mac.ops.setup_link_speed(hw, advertised, true, true); + err = hw->mac.ops.setup_link(hw, advertised, true, true); if (err) { DPRINTK(PROBE, INFO, "setup link failed with code %d\n", err); - hw->mac.ops.setup_link_speed(hw, old, true, true); + hw->mac.ops.setup_link(hw, old, true, true); } } else { /* in this case we currently only support 10Gb/FULL */ diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c index f907836eed2..4042d878670 100644 --- a/drivers/net/ixgbe/ixgbe_main.c +++ b/drivers/net/ixgbe/ixgbe_main.c @@ -2516,7 +2516,7 @@ static void ixgbe_sfp_link_config(struct ixgbe_adapter *adapter) static int ixgbe_non_sfp_link_config(struct ixgbe_hw *hw) { u32 autoneg; - bool link_up = false; + bool negotiation, link_up = false; u32 ret = IXGBE_ERR_LINK_SETUP; if (hw->mac.ops.check_link) @@ -2526,13 +2526,12 @@ static int ixgbe_non_sfp_link_config(struct ixgbe_hw *hw) goto link_cfg_out; if (hw->mac.ops.get_link_capabilities) - ret = hw->mac.ops.get_link_capabilities(hw, &autoneg, - &hw->mac.autoneg); + ret = hw->mac.ops.get_link_capabilities(hw, &autoneg, &negotiation); if (ret) goto link_cfg_out; - if (hw->mac.ops.setup_link_speed) - ret = hw->mac.ops.setup_link_speed(hw, autoneg, true, link_up); + if (hw->mac.ops.setup_link) + ret = hw->mac.ops.setup_link(hw, autoneg, negotiation, link_up); link_cfg_out: return ret; } @@ -4517,14 +4516,14 @@ static void ixgbe_multispeed_fiber_task(struct work_struct *work) multispeed_fiber_task); struct ixgbe_hw *hw = &adapter->hw; u32 autoneg; + bool negotiation; adapter->flags |= IXGBE_FLAG_IN_SFP_LINK_TASK; autoneg = hw->phy.autoneg_advertised; if ((!autoneg) && (hw->mac.ops.get_link_capabilities)) - hw->mac.ops.get_link_capabilities(hw, &autoneg, - &hw->mac.autoneg); - if (hw->mac.ops.setup_link_speed) - hw->mac.ops.setup_link_speed(hw, autoneg, true, true); + hw->mac.ops.get_link_capabilities(hw, &autoneg, &negotiation); + if (hw->mac.ops.setup_link) + hw->mac.ops.setup_link(hw, autoneg, negotiation, true); adapter->flags |= IXGBE_FLAG_NEED_LINK_UPDATE; adapter->flags &= ~IXGBE_FLAG_IN_SFP_LINK_TASK; } diff --git a/drivers/net/ixgbe/ixgbe_type.h b/drivers/net/ixgbe/ixgbe_type.h index f0f3406ef00..8ba90eec1dc 100644 --- a/drivers/net/ixgbe/ixgbe_type.h +++ b/drivers/net/ixgbe/ixgbe_type.h @@ -2332,9 +2332,7 @@ struct ixgbe_mac_operations { s32 (*enable_rx_dma)(struct ixgbe_hw *, u32); /* Link */ - s32 (*setup_link)(struct ixgbe_hw *); - s32 (*setup_link_speed)(struct ixgbe_hw *, ixgbe_link_speed, bool, - bool); + s32 (*setup_link)(struct ixgbe_hw *, ixgbe_link_speed, bool, bool); s32 (*check_link)(struct ixgbe_hw *, ixgbe_link_speed *, bool *, bool); s32 (*get_link_capabilities)(struct ixgbe_hw *, ixgbe_link_speed *, bool *); @@ -2406,8 +2404,6 @@ struct ixgbe_mac_info { u32 orig_autoc; u32 orig_autoc2; bool orig_link_settings_stored; - bool autoneg; - bool autoneg_succeeded; bool autotry_restart; }; @@ -2422,7 +2418,6 @@ struct ixgbe_phy_info { enum ixgbe_media_type media_type; bool reset_disable; ixgbe_autoneg_advertised autoneg_advertised; - bool autoneg_wait_to_complete; bool multispeed_fiber; }; |