diff options
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/mfd/max77693.c | 14 | ||||
-rw-r--r-- | drivers/mfd/rtsx_pcr.c | 2 | ||||
-rw-r--r-- | drivers/mfd/stmpe.h | 2 | ||||
-rw-r--r-- | drivers/mfd/twl4030-power.c | 52 | ||||
-rw-r--r-- | drivers/mfd/viperboard.c | 5 |
5 files changed, 71 insertions, 4 deletions
diff --git a/drivers/mfd/max77693.c b/drivers/mfd/max77693.c index cf008f45968..711773e8e64 100644 --- a/drivers/mfd/max77693.c +++ b/drivers/mfd/max77693.c @@ -240,7 +240,7 @@ static int max77693_i2c_probe(struct i2c_client *i2c, goto err_irq_charger; } - ret = regmap_add_irq_chip(max77693->regmap, max77693->irq, + ret = regmap_add_irq_chip(max77693->regmap_muic, max77693->irq, IRQF_ONESHOT | IRQF_SHARED | IRQF_TRIGGER_FALLING, 0, &max77693_muic_irq_chip, @@ -250,6 +250,17 @@ static int max77693_i2c_probe(struct i2c_client *i2c, goto err_irq_muic; } + /* Unmask interrupts from all blocks in interrupt source register */ + ret = regmap_update_bits(max77693->regmap, + MAX77693_PMIC_REG_INTSRC_MASK, + SRC_IRQ_ALL, (unsigned int)~SRC_IRQ_ALL); + if (ret < 0) { + dev_err(max77693->dev, + "Could not unmask interrupts in INTSRC: %d\n", + ret); + goto err_intsrc; + } + pm_runtime_set_active(max77693->dev); ret = mfd_add_devices(max77693->dev, -1, max77693_devs, @@ -261,6 +272,7 @@ static int max77693_i2c_probe(struct i2c_client *i2c, err_mfd: mfd_remove_devices(max77693->dev); +err_intsrc: regmap_del_irq_chip(max77693->irq, max77693->irq_data_muic); err_irq_muic: regmap_del_irq_chip(max77693->irq, max77693->irq_data_charger); diff --git a/drivers/mfd/rtsx_pcr.c b/drivers/mfd/rtsx_pcr.c index f2643c221d3..30f7ca89a0e 100644 --- a/drivers/mfd/rtsx_pcr.c +++ b/drivers/mfd/rtsx_pcr.c @@ -947,6 +947,7 @@ static void rtsx_pci_idle_work(struct work_struct *work) mutex_unlock(&pcr->pcr_mutex); } +#ifdef CONFIG_PM static void rtsx_pci_power_off(struct rtsx_pcr *pcr, u8 pm_state) { if (pcr->ops->turn_off_led) @@ -961,6 +962,7 @@ static void rtsx_pci_power_off(struct rtsx_pcr *pcr, u8 pm_state) if (pcr->ops->force_power_down) pcr->ops->force_power_down(pcr, pm_state); } +#endif static int rtsx_pci_init_hw(struct rtsx_pcr *pcr) { diff --git a/drivers/mfd/stmpe.h b/drivers/mfd/stmpe.h index 2d045f26f19..bee0abf8204 100644 --- a/drivers/mfd/stmpe.h +++ b/drivers/mfd/stmpe.h @@ -269,7 +269,7 @@ int stmpe_remove(struct stmpe *stmpe); #define STMPE24XX_REG_CHIP_ID 0x80 #define STMPE24XX_REG_IEGPIOR_LSB 0x18 #define STMPE24XX_REG_ISGPIOR_MSB 0x19 -#define STMPE24XX_REG_GPMR_LSB 0xA5 +#define STMPE24XX_REG_GPMR_LSB 0xA4 #define STMPE24XX_REG_GPSR_LSB 0x85 #define STMPE24XX_REG_GPCR_LSB 0x88 #define STMPE24XX_REG_GPDR_LSB 0x8B diff --git a/drivers/mfd/twl4030-power.c b/drivers/mfd/twl4030-power.c index cf92a6d1c53..50f9091bcd3 100644 --- a/drivers/mfd/twl4030-power.c +++ b/drivers/mfd/twl4030-power.c @@ -44,6 +44,15 @@ static u8 twl4030_start_script_address = 0x2b; #define PWR_DEVSLP BIT(1) #define PWR_DEVOFF BIT(0) +/* Register bits for CFG_P1_TRANSITION (also for P2 and P3) */ +#define STARTON_SWBUG BIT(7) /* Start on watchdog */ +#define STARTON_VBUS BIT(5) /* Start on VBUS */ +#define STARTON_VBAT BIT(4) /* Start on battery insert */ +#define STARTON_RTC BIT(3) /* Start on RTC */ +#define STARTON_USB BIT(2) /* Start on USB host */ +#define STARTON_CHG BIT(1) /* Start on charger */ +#define STARTON_PWON BIT(0) /* Start on PWRON button */ + #define SEQ_OFFSYNC (1 << 0) #define PHY_TO_OFF_PM_MASTER(p) (p - 0x36) @@ -606,6 +615,44 @@ twl4030_power_configure_resources(const struct twl4030_power_data *pdata) return 0; } +static int twl4030_starton_mask_and_set(u8 bitmask, u8 bitvalues) +{ + u8 regs[3] = { TWL4030_PM_MASTER_CFG_P1_TRANSITION, + TWL4030_PM_MASTER_CFG_P2_TRANSITION, + TWL4030_PM_MASTER_CFG_P3_TRANSITION, }; + u8 val; + int i, err; + + err = twl_i2c_write_u8(TWL_MODULE_PM_MASTER, TWL4030_PM_MASTER_KEY_CFG1, + TWL4030_PM_MASTER_PROTECT_KEY); + if (err) + goto relock; + err = twl_i2c_write_u8(TWL_MODULE_PM_MASTER, + TWL4030_PM_MASTER_KEY_CFG2, + TWL4030_PM_MASTER_PROTECT_KEY); + if (err) + goto relock; + + for (i = 0; i < sizeof(regs); i++) { + err = twl_i2c_read_u8(TWL_MODULE_PM_MASTER, + &val, regs[i]); + if (err) + break; + val = (~bitmask & val) | (bitmask & bitvalues); + err = twl_i2c_write_u8(TWL_MODULE_PM_MASTER, + val, regs[i]); + if (err) + break; + } + + if (err) + pr_err("TWL4030 Register access failed: %i\n", err); + +relock: + return twl_i2c_write_u8(TWL_MODULE_PM_MASTER, 0, + TWL4030_PM_MASTER_PROTECT_KEY); +} + /* * In master mode, start the power off sequence. * After a successful execution, TWL shuts down the power to the SoC @@ -615,6 +662,11 @@ void twl4030_power_off(void) { int err; + /* Disable start on charger or VBUS as it can break poweroff */ + err = twl4030_starton_mask_and_set(STARTON_VBUS | STARTON_CHG, 0); + if (err) + pr_err("TWL4030 Unable to configure start-up\n"); + err = twl_i2c_write_u8(TWL_MODULE_PM_MASTER, PWR_DEVOFF, TWL4030_PM_MASTER_P1_SW_EVENTS); if (err) diff --git a/drivers/mfd/viperboard.c b/drivers/mfd/viperboard.c index e00f5340ed8..3c2b8f9e3c8 100644 --- a/drivers/mfd/viperboard.c +++ b/drivers/mfd/viperboard.c @@ -93,8 +93,9 @@ static int vprbrd_probe(struct usb_interface *interface, version >> 8, version & 0xff, vb->usb_dev->bus->busnum, vb->usb_dev->devnum); - ret = mfd_add_devices(&interface->dev, -1, vprbrd_devs, - ARRAY_SIZE(vprbrd_devs), NULL, 0, NULL); + ret = mfd_add_devices(&interface->dev, PLATFORM_DEVID_AUTO, + vprbrd_devs, ARRAY_SIZE(vprbrd_devs), NULL, 0, + NULL); if (ret != 0) { dev_err(&interface->dev, "Failed to add mfd devices to core."); goto error; |