summaryrefslogtreecommitdiffstats
path: root/drivers
diff options
context:
space:
mode:
Diffstat (limited to 'drivers')
-rw-r--r--drivers/media/usb/dvb-usb-v2/af9015.c155
-rw-r--r--drivers/media/usb/dvb-usb-v2/af9015.h21
2 files changed, 91 insertions, 85 deletions
diff --git a/drivers/media/usb/dvb-usb-v2/af9015.c b/drivers/media/usb/dvb-usb-v2/af9015.c
index d9d3030106d..c429da7da95 100644
--- a/drivers/media/usb/dvb-usb-v2/af9015.c
+++ b/drivers/media/usb/dvb-usb-v2/af9015.c
@@ -23,9 +23,6 @@
#include "af9015.h"
-static int dvb_usb_af9015_debug;
-module_param_named(debug, dvb_usb_af9015_debug, int, 0644);
-MODULE_PARM_DESC(debug, "set debugging level" DVB_USB_DEBUG_STATUS);
static int dvb_usb_af9015_remote;
module_param_named(remote, dvb_usb_af9015_remote, int, 0644);
MODULE_PARM_DESC(remote, "select remote");
@@ -72,15 +69,17 @@ static int af9015_ctrl_msg(struct dvb_usb_device *d, struct req_t *req)
case BOOT:
break;
default:
- err("unknown command:%d", req->cmd);
+ dev_err(&d->udev->dev, "%s: unknown command=%d\n",
+ KBUILD_MODNAME, req->cmd);
ret = -1;
goto error;
}
/* buffer overflow check */
if ((write && (req->data_len > BUF_LEN - REQ_HDR_LEN)) ||
- (!write && (req->data_len > BUF_LEN - ACK_HDR_LEN))) {
- err("too much data; cmd:%d len:%d", req->cmd, req->data_len);
+ (!write && (req->data_len > BUF_LEN - ACK_HDR_LEN))) {
+ dev_err(&d->udev->dev, "%s: too much data; cmd=%d len=%d\n",
+ KBUILD_MODNAME, req->cmd, req->data_len);
ret = -EINVAL;
goto error;
}
@@ -106,7 +105,8 @@ static int af9015_ctrl_msg(struct dvb_usb_device *d, struct req_t *req)
/* check status */
if (rlen && buf[1]) {
- err("command failed:%d", buf[1]);
+ dev_err(&d->udev->dev, "%s: command failed=%d\n",
+ KBUILD_MODNAME, buf[1]);
ret = -1;
goto error;
}
@@ -334,7 +334,8 @@ static int af9015_identify_state(struct dvb_usb_device *d, const char **name)
if (ret)
return ret;
- deb_info("%s: reply:%02x\n", __func__, reply);
+ dev_dbg(&d->udev->dev, "%s: reply=%02x\n", __func__, reply);
+
if (reply == 0x02)
ret = WARM;
else
@@ -350,8 +351,7 @@ static int af9015_download_firmware(struct dvb_usb_device *d,
int i, len, remaining, ret;
struct req_t req = {DOWNLOAD_FIRMWARE, 0, 0, 0, 0, 0, NULL};
u16 checksum = 0;
-
- deb_info("%s:\n", __func__);
+ dev_dbg(&d->udev->dev, "%s:\n", __func__);
/* calc checksum */
for (i = 0; i < fw->size; i++)
@@ -373,7 +373,9 @@ static int af9015_download_firmware(struct dvb_usb_device *d,
ret = af9015_ctrl_msg(d, &req);
if (ret) {
- err("firmware download failed:%d", ret);
+ dev_err(&d->udev->dev,
+ "%s: firmware download failed=%d\n",
+ KBUILD_MODNAME, ret);
goto error;
}
}
@@ -383,7 +385,8 @@ static int af9015_download_firmware(struct dvb_usb_device *d,
req.data_len = 0;
ret = af9015_ctrl_msg(d, &req);
if (ret) {
- err("firmware boot failed:%d", ret);
+ dev_err(&d->udev->dev, "%s: firmware boot failed=%d\n",
+ KBUILD_MODNAME, ret);
goto error;
}
@@ -414,9 +417,9 @@ static int af9015_eeprom_hash(struct dvb_usb_device *d)
eeprom[reg] = val;
}
- if (dvb_usb_af9015_debug & 0x01)
- print_hex_dump_bytes("", DUMP_PREFIX_OFFSET, eeprom,
- eeprom_size);
+ for (reg = 0; reg < eeprom_size; reg += 16)
+ dev_dbg(&d->udev->dev, "%s: %*ph\n", __func__, 16,
+ eeprom + reg);
BUG_ON(eeprom_size % 4);
@@ -426,7 +429,8 @@ static int af9015_eeprom_hash(struct dvb_usb_device *d)
state->eeprom_sum += le32_to_cpu(((u32 *)eeprom)[reg]);
}
- deb_info("%s: eeprom sum=%.8x\n", __func__, state->eeprom_sum);
+ dev_dbg(&d->udev->dev, "%s: eeprom sum=%.8x\n",
+ __func__, state->eeprom_sum);
ret = 0;
free:
@@ -441,7 +445,7 @@ static int af9015_read_config(struct dvb_usb_device *d)
u8 val, i, offset = 0;
struct req_t req = {READ_I2C, AF9015_I2C_EEPROM, 0, 0, 1, 1, &val};
- deb_info("%s:\n", __func__);
+ dev_dbg(&d->udev->dev, "%s:\n", __func__);
/* IR remote controller */
req.addr = AF9015_EEPROM_IR_MODE;
@@ -458,8 +462,8 @@ static int af9015_read_config(struct dvb_usb_device *d)
if (ret)
goto error;
- deb_info("%s: IR mode=%d\n", __func__, val);
state->ir_mode = val;
+ dev_dbg(&d->udev->dev, "%s: IR mode=%d\n", __func__, val);
/* TS mode - one or two receivers */
req.addr = AF9015_EEPROM_TS_MODE;
@@ -468,7 +472,7 @@ static int af9015_read_config(struct dvb_usb_device *d)
goto error;
state->dual_mode = val;
- deb_info("%s: TS mode=%d\n", __func__, state->dual_mode);
+ dev_dbg(&d->udev->dev, "%s: TS mode=%d\n", __func__, state->dual_mode);
/* disable 2nd adapter because we don't have PID-filters */
if (d->udev->speed == USB_SPEED_FULL)
@@ -506,8 +510,9 @@ static int af9015_read_config(struct dvb_usb_device *d)
state->af9013_config[i].clock = 25000000;
break;
};
- deb_info("%s: [%d] xtal=%d set clock=%d\n", __func__, i,
- val, state->af9013_config[i].clock);
+ dev_dbg(&d->udev->dev, "%s: [%d] xtal=%d set clock=%d\n",
+ __func__, i, val,
+ state->af9013_config[i].clock);
/* IF frequency */
req.addr = AF9015_EEPROM_IF1H + offset;
@@ -524,8 +529,8 @@ static int af9015_read_config(struct dvb_usb_device *d)
state->af9013_config[i].if_frequency += val;
state->af9013_config[i].if_frequency *= 1000;
- deb_info("%s: [%d] IF frequency=%d\n", __func__, i,
- state->af9013_config[i].if_frequency);
+ dev_dbg(&d->udev->dev, "%s: [%d] IF frequency=%d\n", __func__,
+ i, state->af9013_config[i].if_frequency);
/* MT2060 IF1 */
req.addr = AF9015_EEPROM_MT2060_IF1H + offset;
@@ -538,7 +543,7 @@ static int af9015_read_config(struct dvb_usb_device *d)
if (ret)
goto error;
state->mt2060_if1[i] += val;
- deb_info("%s: [%d] MT2060 IF1=%d\n", __func__, i,
+ dev_dbg(&d->udev->dev, "%s: [%d] MT2060 IF1=%d\n", __func__, i,
state->mt2060_if1[i]);
/* tuner */
@@ -568,17 +573,21 @@ static int af9015_read_config(struct dvb_usb_device *d)
state->af9013_config[i].spec_inv = 1;
break;
default:
- warn("tuner id=%d not supported, please report!", val);
+ dev_err(&d->udev->dev, "%s: tuner id=%d not " \
+ "supported, please report!\n",
+ KBUILD_MODNAME, val);
return -ENODEV;
};
state->af9013_config[i].tuner = val;
- deb_info("%s: [%d] tuner id=%d\n", __func__, i, val);
+ dev_dbg(&d->udev->dev, "%s: [%d] tuner id=%d\n",
+ __func__, i, val);
}
error:
if (ret)
- err("eeprom read failed=%d", ret);
+ dev_err(&d->udev->dev, "%s: eeprom read failed=%d\n",
+ KBUILD_MODNAME, ret);
/* AverMedia AVerTV Volar Black HD (A850) device have bad EEPROM
content :-( Override some wrong values here. Ditto for the
@@ -588,7 +597,9 @@ error:
USB_PID_AVERMEDIA_A850) ||
(le16_to_cpu(d->udev->descriptor.idProduct) ==
USB_PID_AVERMEDIA_A850T))) {
- deb_info("%s: AverMedia A850: overriding config\n", __func__);
+ dev_dbg(&d->udev->dev,
+ "%s: AverMedia A850: overriding config\n",
+ __func__);
/* disable dual mode */
state->dual_mode = 0;
@@ -602,9 +613,10 @@ error:
static int af9015_get_stream_config(struct dvb_frontend *fe, u8 *ts_type,
struct usb_data_stream_properties *stream)
{
- deb_info("%s: adap=%d\n", __func__, fe_to_adap(fe)->id);
+ struct dvb_usb_device *d = fe_to_d(fe);
+ dev_dbg(&d->udev->dev, "%s: adap=%d\n", __func__, fe_to_adap(fe)->id);
- if (fe_to_d(fe)->udev->speed == USB_SPEED_FULL)
+ if (d->udev->speed == USB_SPEED_FULL)
stream->u.bulk.buffersize = TS_USB11_FRAME_SIZE;
return 0;
@@ -721,7 +733,7 @@ static int af9015_copy_firmware(struct dvb_usb_device *d)
u8 val, i;
struct req_t req = {COPY_FIRMWARE, 0, 0x5100, 0, 0, sizeof(fw_params),
fw_params };
- deb_info("%s:\n", __func__);
+ dev_dbg(&d->udev->dev, "%s:\n", __func__);
fw_params[0] = state->firmware_size >> 8;
fw_params[1] = state->firmware_size & 0xff;
@@ -736,7 +748,8 @@ static int af9015_copy_firmware(struct dvb_usb_device *d)
if (ret)
goto error;
else
- deb_info("%s: firmware status:%02x\n", __func__, val);
+ dev_dbg(&d->udev->dev, "%s: firmware status=%02x\n",
+ __func__, val);
if (val == 0x0c) /* fw is running, no need for download */
goto exit;
@@ -751,8 +764,10 @@ static int af9015_copy_firmware(struct dvb_usb_device *d)
/* copy firmware */
ret = af9015_ctrl_msg(d, &req);
if (ret)
- err("firmware copy cmd failed:%d", ret);
- deb_info("%s: firmware copy done\n", __func__);
+ dev_err(&d->udev->dev, "%s: firmware copy cmd failed=%d\n",
+ KBUILD_MODNAME, ret);
+
+ dev_dbg(&d->udev->dev, "%s: firmware copy done\n", __func__);
/* set I2C master clock back to normal */
ret = af9015_write_reg(d, 0xd416, 0x14); /* 0x14 * 400ns */
@@ -762,7 +777,8 @@ static int af9015_copy_firmware(struct dvb_usb_device *d)
/* request boot firmware */
ret = af9015_write_reg_i2c(d, state->af9013_config[1].i2c_addr,
0xe205, 1);
- deb_info("%s: firmware boot cmd status:%d\n", __func__, ret);
+ dev_dbg(&d->udev->dev, "%s: firmware boot cmd status=%d\n",
+ __func__, ret);
if (ret)
goto error;
@@ -772,8 +788,8 @@ static int af9015_copy_firmware(struct dvb_usb_device *d)
/* check firmware status */
ret = af9015_read_reg_i2c(d, state->af9013_config[1].i2c_addr,
0x98be, &val);
- deb_info("%s: firmware status cmd status:%d fw status:%02x\n",
- __func__, ret, val);
+ dev_dbg(&d->udev->dev, "%s: firmware status cmd status=%d " \
+ "firmware status=%02x\n", __func__, ret, val);
if (ret)
goto error;
@@ -782,10 +798,12 @@ static int af9015_copy_firmware(struct dvb_usb_device *d)
}
if (val == 0x04) {
- err("firmware did not run");
+ dev_err(&d->udev->dev, "%s: firmware did not run\n",
+ KBUILD_MODNAME);
ret = -1;
} else if (val != 0x0c) {
- err("firmware boot timeout");
+ dev_err(&d->udev->dev, "%s: firmware boot timeout\n",
+ KBUILD_MODNAME);
ret = -1;
}
@@ -814,8 +832,10 @@ static int af9015_af9013_frontend_attach(struct dvb_usb_adapter *adap)
if (state->dual_mode) {
ret = af9015_copy_firmware(adap_to_d(adap));
if (ret) {
- err("firmware copy to 2nd frontend " \
- "failed, will disable it");
+ dev_err(&adap_to_d(adap)->udev->dev,
+ "%s: firmware copy to 2nd " \
+ "frontend failed, will " \
+ "disable it\n", KBUILD_MODNAME);
state->dual_mode = 0;
return -ENODEV;
}
@@ -921,9 +941,10 @@ static struct mxl5007t_config af9015_mxl5007t_config = {
static int af9015_tuner_attach(struct dvb_usb_adapter *adap)
{
- struct af9015_state *state = adap_to_priv(adap);
+ struct dvb_usb_device *d = adap_to_d(adap);
+ struct af9015_state *state = d_to_priv(d);
int ret;
- deb_info("%s:\n", __func__);
+ dev_dbg(&d->udev->dev, "%s:\n", __func__);
switch (state->af9013_config[adap->id].tuner) {
case AF9013_TUNER_MT2060:
@@ -977,9 +998,10 @@ static int af9015_tuner_attach(struct dvb_usb_adapter *adap)
break;
case AF9013_TUNER_UNKNOWN:
default:
+ dev_err(&d->udev->dev, "%s: unknown tuner id=%d\n",
+ KBUILD_MODNAME,
+ state->af9013_config[adap->id].tuner);
ret = -ENODEV;
- err("Unknown tuner id:%d",
- state->af9013_config[adap->id].tuner);
}
if (adap->fe[0]->ops.tuner_ops.init) {
@@ -999,13 +1021,14 @@ static int af9015_tuner_attach(struct dvb_usb_adapter *adap)
static int af9015_pid_filter_ctrl(struct dvb_usb_adapter *adap, int onoff)
{
+ struct dvb_usb_device *d = adap_to_d(adap);
int ret;
- deb_info("%s: onoff:%d\n", __func__, onoff);
+ dev_dbg(&d->udev->dev, "%s: onoff=%d\n", __func__, onoff);
if (onoff)
- ret = af9015_set_reg_bit(adap_to_d(adap), 0xd503, 0);
+ ret = af9015_set_reg_bit(d, 0xd503, 0);
else
- ret = af9015_clear_reg_bit(adap_to_d(adap), 0xd503, 0);
+ ret = af9015_clear_reg_bit(d, 0xd503, 0);
return ret;
}
@@ -1013,22 +1036,22 @@ static int af9015_pid_filter_ctrl(struct dvb_usb_adapter *adap, int onoff)
static int af9015_pid_filter(struct dvb_usb_adapter *adap, int index, u16 pid,
int onoff)
{
+ struct dvb_usb_device *d = adap_to_d(adap);
int ret;
u8 idx;
+ dev_dbg(&d->udev->dev, "%s: index=%d pid=%04x onoff=%d\n",
+ __func__, index, pid, onoff);
- deb_info("%s: set pid filter, index %d, pid %x, onoff %d\n",
- __func__, index, pid, onoff);
-
- ret = af9015_write_reg(adap_to_d(adap), 0xd505, (pid & 0xff));
+ ret = af9015_write_reg(d, 0xd505, (pid & 0xff));
if (ret)
goto error;
- ret = af9015_write_reg(adap_to_d(adap), 0xd506, (pid >> 8));
+ ret = af9015_write_reg(d, 0xd506, (pid >> 8));
if (ret)
goto error;
idx = ((index & 0x1f) | (1 << 5));
- ret = af9015_write_reg(adap_to_d(adap), 0xd504, idx);
+ ret = af9015_write_reg(d, 0xd504, idx);
error:
return ret;
@@ -1040,7 +1063,7 @@ static int af9015_init_endpoint(struct dvb_usb_device *d)
int ret;
u16 frame_size;
u8 packet_size;
- deb_info("%s: USB speed:%d\n", __func__, d->udev->speed);
+ dev_dbg(&d->udev->dev, "%s: USB speed=%d\n", __func__, d->udev->speed);
if (d->udev->speed == USB_SPEED_FULL) {
frame_size = TS_USB11_FRAME_SIZE/4;
@@ -1115,7 +1138,9 @@ static int af9015_init_endpoint(struct dvb_usb_device *d)
error:
if (ret)
- err("endpoint init failed:%d", ret);
+ dev_err(&d->udev->dev, "%s: endpoint init failed=%d\n",
+ KBUILD_MODNAME, ret);
+
return ret;
}
@@ -1123,7 +1148,7 @@ static int af9015_init(struct dvb_usb_device *d)
{
struct af9015_state *state = d_to_priv(d);
int ret;
- deb_info("%s:\n", __func__);
+ dev_dbg(&d->udev->dev, "%s:\n", __func__);
mutex_init(&state->fe_mutex);
@@ -1177,21 +1202,21 @@ static int af9015_rc_query(struct dvb_usb_device *d)
int ret;
u8 buf[17];
- deb_info("%s:\n", __func__);
-
/* read registers needed to detect remote controller code */
ret = af9015_read_regs(d, 0x98d9, buf, sizeof(buf));
if (ret)
goto error;
/* If any of these are non-zero, assume invalid data */
- if (buf[1] || buf[2] || buf[3])
+ if (buf[1] || buf[2] || buf[3]) {
+ dev_dbg(&d->udev->dev, "%s: invalid data\n", __func__);
return ret;
+ }
/* Check for repeat of previous code */
if ((state->rc_repeat != buf[6] || buf[0]) &&
!memcmp(&buf[12], state->rc_last, 4)) {
- deb_rc("%s: key repeated\n", __func__);
+ dev_dbg(&d->udev->dev, "%s: key repeated\n", __func__);
rc_keydown(d->rc_dev, state->rc_keycode, 0);
state->rc_repeat = buf[6];
return ret;
@@ -1199,7 +1224,8 @@ static int af9015_rc_query(struct dvb_usb_device *d)
/* Only process key if canary killed */
if (buf[16] != 0xff && buf[0] != 0x01) {
- deb_rc("%s: key pressed %*ph\n", __func__, 4, buf + 12);
+ dev_dbg(&d->udev->dev, "%s: key pressed %*ph\n",
+ __func__, 4, buf + 12);
/* Reset the canary */
ret = af9015_write_reg(d, 0x98e9, 0xff);
@@ -1224,7 +1250,7 @@ static int af9015_rc_query(struct dvb_usb_device *d)
}
rc_keydown(d->rc_dev, state->rc_keycode, 0);
} else {
- deb_rc("%s: no key press\n", __func__);
+ dev_dbg(&d->udev->dev, "%s: no key press\n", __func__);
/* Invalidate last keypress */
/* Not really needed, but helps with debug */
state->rc_last[2] = state->rc_last[3];
@@ -1235,7 +1261,8 @@ static int af9015_rc_query(struct dvb_usb_device *d)
error:
if (ret) {
- err("%s: failed:%d", __func__, ret);
+ dev_warn(&d->udev->dev, "%s: rc query failed=%d\n",
+ KBUILD_MODNAME, ret);
/* allow random errors as dvb-usb will stop polling on error */
if (!state->rc_failed)
diff --git a/drivers/media/usb/dvb-usb-v2/af9015.h b/drivers/media/usb/dvb-usb-v2/af9015.h
index 35f946c478f..533637dedd2 100644
--- a/drivers/media/usb/dvb-usb-v2/af9015.h
+++ b/drivers/media/usb/dvb-usb-v2/af9015.h
@@ -36,27 +36,6 @@
#include "tda18218.h"
#include "mxl5007t.h"
-#define DVB_USB_LOG_PREFIX "af9015"
-
-#ifdef CONFIG_DVB_USB_DEBUG
-#define dprintk(var, level, args...) \
- do { if ((var & level)) printk(args); } while (0)
-#define DVB_USB_DEBUG_STATUS
-#else
-#define dprintk(args...)
-#define DVB_USB_DEBUG_STATUS " (debugging is not enabled)"
-#endif
-
-#define deb_info(args...) dprintk(dvb_usb_af9015_debug, 0x01, args)
-#define deb_rc(args...) dprintk(dvb_usb_af9015_debug, 0x02, args)
-
-#undef err
-#define err(format, arg...) \
- printk(KERN_ERR DVB_USB_LOG_PREFIX ": " format "\n" , ## arg)
-#undef warn
-#define warn(format, arg...) \
- printk(KERN_WARNING DVB_USB_LOG_PREFIX ": " format "\n" , ## arg)
-
#define AF9015_FIRMWARE "dvb-usb-af9015.fw"
/* Windows driver uses packet count 21 for USB1.1 and 348 for USB2.0.
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-29 16:05:59 +0000