diff options
Diffstat (limited to 'drivers')
225 files changed, 25060 insertions, 15283 deletions
diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig index 735f5ea1747..12cf5d491f0 100644 --- a/drivers/acpi/Kconfig +++ b/drivers/acpi/Kconfig @@ -260,6 +260,9 @@ config ACPI_ASUS config ACPI_TOSHIBA tristate "Toshiba Laptop Extras" depends on X86 + select INPUT_POLLDEV + select NET + select RFKILL select BACKLIGHT_CLASS_DEVICE ---help--- This driver adds support for access to certain system settings diff --git a/drivers/acpi/toshiba_acpi.c b/drivers/acpi/toshiba_acpi.c index 0a43c8e0eff..8a649f40d16 100644 --- a/drivers/acpi/toshiba_acpi.c +++ b/drivers/acpi/toshiba_acpi.c @@ -3,6 +3,7 @@ * * * Copyright (C) 2002-2004 John Belmonte + * Copyright (C) 2008 Philip Langdale * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -33,7 +34,7 @@ * */ -#define TOSHIBA_ACPI_VERSION "0.18" +#define TOSHIBA_ACPI_VERSION "0.19" #define PROC_INTERFACE_VERSION 1 #include <linux/kernel.h> @@ -42,6 +43,9 @@ #include <linux/types.h> #include <linux/proc_fs.h> #include <linux/backlight.h> +#include <linux/platform_device.h> +#include <linux/rfkill.h> +#include <linux/input-polldev.h> #include <asm/uaccess.h> @@ -90,6 +94,7 @@ MODULE_LICENSE("GPL"); #define HCI_VIDEO_OUT 0x001c #define HCI_HOTKEY_EVENT 0x001e #define HCI_LCD_BRIGHTNESS 0x002a +#define HCI_WIRELESS 0x0056 /* field definitions */ #define HCI_LCD_BRIGHTNESS_BITS 3 @@ -98,9 +103,14 @@ MODULE_LICENSE("GPL"); #define HCI_VIDEO_OUT_LCD 0x1 #define HCI_VIDEO_OUT_CRT 0x2 #define HCI_VIDEO_OUT_TV 0x4 +#define HCI_WIRELESS_KILL_SWITCH 0x01 +#define HCI_WIRELESS_BT_PRESENT 0x0f +#define HCI_WIRELESS_BT_ATTACH 0x40 +#define HCI_WIRELESS_BT_POWER 0x80 static const struct acpi_device_id toshiba_device_ids[] = { {"TOS6200", 0}, + {"TOS6208", 0}, {"TOS1900", 0}, {"", 0}, }; @@ -193,7 +203,7 @@ static acpi_status hci_raw(const u32 in[HCI_WORDS], u32 out[HCI_WORDS]) return status; } -/* common hci tasks (get or set one value) +/* common hci tasks (get or set one or two value) * * In addition to the ACPI status, the HCI system returns a result which * may be useful (such as "not supported"). @@ -218,6 +228,152 @@ static acpi_status hci_read1(u32 reg, u32 * out1, u32 * result) return status; } +static acpi_status hci_write2(u32 reg, u32 in1, u32 in2, u32 *result) +{ + u32 in[HCI_WORDS] = { HCI_SET, reg, in1, in2, 0, 0 }; + u32 out[HCI_WORDS]; + acpi_status status = hci_raw(in, out); + *result = (status == AE_OK) ? out[0] : HCI_FAILURE; + return status; +} + +static acpi_status hci_read2(u32 reg, u32 *out1, u32 *out2, u32 *result) +{ + u32 in[HCI_WORDS] = { HCI_GET, reg, *out1, *out2, 0, 0 }; + u32 out[HCI_WORDS]; + acpi_status status = hci_raw(in, out); + *out1 = out[2]; + *out2 = out[3]; + *result = (status == AE_OK) ? out[0] : HCI_FAILURE; + return status; +} + +struct toshiba_acpi_dev { + struct platform_device *p_dev; + struct rfkill *rfk_dev; + struct input_polled_dev *poll_dev; + + const char *bt_name; + const char *rfk_name; + + bool last_rfk_state; + + struct mutex mutex; +}; + +static struct toshiba_acpi_dev toshiba_acpi = { + .bt_name = "Toshiba Bluetooth", + .rfk_name = "Toshiba RFKill Switch", + .last_rfk_state = false, +}; + +/* Bluetooth rfkill handlers */ + +static u32 hci_get_bt_present(bool *present) +{ + u32 hci_result; + u32 value, value2; + + value = 0; + value2 = 0; + hci_read2(HCI_WIRELESS, &value, &value2, &hci_result); + if (hci_result == HCI_SUCCESS) + *present = (value & HCI_WIRELESS_BT_PRESENT) ? true : false; + + return hci_result; +} + +static u32 hci_get_bt_on(bool *on) +{ + u32 hci_result; + u32 value, value2; + + value = 0; + value2 = 0x0001; + hci_read2(HCI_WIRELESS, &value, &value2, &hci_result); + if (hci_result == HCI_SUCCESS) + *on = (value & HCI_WIRELESS_BT_POWER) && + (value & HCI_WIRELESS_BT_ATTACH); + + return hci_result; +} + +static u32 hci_get_radio_state(bool *radio_state) +{ + u32 hci_result; + u32 value, value2; + + value = 0; + value2 = 0x0001; + hci_read2(HCI_WIRELESS, &value, &value2, &hci_result); + + *radio_state = value & HCI_WIRELESS_KILL_SWITCH; + return hci_result; +} + +static int bt_rfkill_toggle_radio(void *data, enum rfkill_state state) +{ + u32 result1, result2; + u32 value; + bool radio_state; + struct toshiba_acpi_dev *dev = data; + + value = (state == RFKILL_STATE_UNBLOCKED); + + if (hci_get_radio_state(&radio_state) != HCI_SUCCESS) + return -EFAULT; + + switch (state) { + case RFKILL_STATE_UNBLOCKED: + if (!radio_state) + return -EPERM; + break; + case RFKILL_STATE_SOFT_BLOCKED: + break; + default: + return -EINVAL; + } + + mutex_lock(&dev->mutex); + hci_write2(HCI_WIRELESS, value, HCI_WIRELESS_BT_POWER, &result1); + hci_write2(HCI_WIRELESS, value, HCI_WIRELESS_BT_ATTACH, &result2); + mutex_unlock(&dev->mutex); + + if (result1 != HCI_SUCCESS || result2 != HCI_SUCCESS) + return -EFAULT; + + return 0; +} + +static void bt_poll_rfkill(struct input_polled_dev *poll_dev) +{ + bool state_changed; + bool new_rfk_state; + bool value; + u32 hci_result; + struct toshiba_acpi_dev *dev = poll_dev->private; + + hci_result = hci_get_radio_state(&value); + if (hci_result != HCI_SUCCESS) + return; /* Can't do anything useful */ + + new_rfk_state = value; + + mutex_lock(&dev->mutex); + state_changed = new_rfk_state != dev->last_rfk_state; + dev->last_rfk_state = new_rfk_state; + mutex_unlock(&dev->mutex); + + if (unlikely(state_changed)) { + rfkill_force_state(dev->rfk_dev, + new_rfk_state ? + RFKILL_STATE_SOFT_BLOCKED : + RFKILL_STATE_HARD_BLOCKED); + input_report_switch(poll_dev->input, SW_RFKILL_ALL, + new_rfk_state); + } +} + static struct proc_dir_entry *toshiba_proc_dir /*= 0*/ ; static struct backlight_device *toshiba_backlight_device; static int force_fan; @@ -547,6 +703,14 @@ static struct backlight_ops toshiba_backlight_data = { static void toshiba_acpi_exit(void) { + if (toshiba_acpi.poll_dev) { + input_unregister_polled_device(toshiba_acpi.poll_dev); + input_free_polled_device(toshiba_acpi.poll_dev); + } + + if (toshiba_acpi.rfk_dev) + rfkill_unregister(toshiba_acpi.rfk_dev); + if (toshiba_backlight_device) backlight_device_unregister(toshiba_backlight_device); @@ -555,6 +719,8 @@ static void toshiba_acpi_exit(void) if (toshiba_proc_dir) remove_proc_entry(PROC_TOSHIBA, acpi_root_dir); + platform_device_unregister(toshiba_acpi.p_dev); + return; } @@ -562,6 +728,10 @@ static int __init toshiba_acpi_init(void) { acpi_status status = AE_OK; u32 hci_result; + bool bt_present; + bool bt_on; + bool radio_on; + int ret = 0; if (acpi_disabled) return -ENODEV; @@ -578,6 +748,18 @@ static int __init toshiba_acpi_init(void) TOSHIBA_ACPI_VERSION); printk(MY_INFO " HCI method: %s\n", method_hci); + mutex_init(&toshiba_acpi.mutex); + + toshiba_acpi.p_dev = platform_device_register_simple("toshiba_acpi", + -1, NULL, 0); + if (IS_ERR(toshiba_acpi.p_dev)) { + ret = PTR_ERR(toshiba_acpi.p_dev); + printk(MY_ERR "unable to register platform device\n"); + toshiba_acpi.p_dev = NULL; + toshiba_acpi_exit(); + return ret; + } + force_fan = 0; key_event_valid = 0; @@ -586,19 +768,23 @@ static int __init toshiba_acpi_init(void) toshiba_proc_dir = proc_mkdir(PROC_TOSHIBA, acpi_root_dir); if (!toshiba_proc_dir) { - status = AE_ERROR; + toshiba_acpi_exit(); + return -ENODEV; } else { toshiba_proc_dir->owner = THIS_MODULE; status = add_device(); - if (ACPI_FAILURE(status)) - remove_proc_entry(PROC_TOSHIBA, acpi_root_dir); + if (ACPI_FAILURE(status)) { + toshiba_acpi_exit(); + return -ENODEV; + } } - toshiba_backlight_device = backlight_device_register("toshiba",NULL, + toshiba_backlight_device = backlight_device_register("toshiba", + &toshiba_acpi.p_dev->dev, NULL, &toshiba_backlight_data); if (IS_ERR(toshiba_backlight_device)) { - int ret = PTR_ERR(toshiba_backlight_device); + ret = PTR_ERR(toshiba_backlight_device); printk(KERN_ERR "Could not register toshiba backlight device\n"); toshiba_backlight_device = NULL; @@ -607,7 +793,66 @@ static int __init toshiba_acpi_init(void) } toshiba_backlight_device->props.max_brightness = HCI_LCD_BRIGHTNESS_LEVELS - 1; - return (ACPI_SUCCESS(status)) ? 0 : -ENODEV; + /* Register rfkill switch for Bluetooth */ + if (hci_get_bt_present(&bt_present) == HCI_SUCCESS && bt_present) { + toshiba_acpi.rfk_dev = rfkill_allocate(&toshiba_acpi.p_dev->dev, + RFKILL_TYPE_BLUETOOTH); + if (!toshiba_acpi.rfk_dev) { + printk(MY_ERR "unable to allocate rfkill device\n"); + toshiba_acpi_exit(); + return -ENOMEM; + } + + toshiba_acpi.rfk_dev->name = toshiba_acpi.bt_name; + toshiba_acpi.rfk_dev->toggle_radio = bt_rfkill_toggle_radio; + toshiba_acpi.rfk_dev->user_claim_unsupported = 1; + toshiba_acpi.rfk_dev->data = &toshiba_acpi; + + if (hci_get_bt_on(&bt_on) == HCI_SUCCESS && bt_on) { + toshiba_acpi.rfk_dev->state = RFKILL_STATE_UNBLOCKED; + } else if (hci_get_radio_state(&radio_on) == HCI_SUCCESS && + radio_on) { + toshiba_acpi.rfk_dev->state = RFKILL_STATE_SOFT_BLOCKED; + } else { + toshiba_acpi.rfk_dev->state = RFKILL_STATE_HARD_BLOCKED; + } + + ret = rfkill_register(toshiba_acpi.rfk_dev); + if (ret) { + printk(MY_ERR "unable to register rfkill device\n"); + toshiba_acpi_exit(); + return -ENOMEM; + } + } + + /* Register input device for kill switch */ + toshiba_acpi.poll_dev = input_allocate_polled_device(); + if (!toshiba_acpi.poll_dev) { + printk(MY_ERR "unable to allocate kill-switch input device\n"); + toshiba_acpi_exit(); + return -ENOMEM; + } + toshiba_acpi.poll_dev->private = &toshiba_acpi; + toshiba_acpi.poll_dev->poll = bt_poll_rfkill; + toshiba_acpi.poll_dev->poll_interval = 1000; /* msecs */ + + toshiba_acpi.poll_dev->input->name = toshiba_acpi.rfk_name; + toshiba_acpi.poll_dev->input->id.bustype = BUS_HOST; + toshiba_acpi.poll_dev->input->id.vendor = 0x0930; /* Toshiba USB ID */ + set_bit(EV_SW, toshiba_acpi.poll_dev->input->evbit); + set_bit(SW_RFKILL_ALL, toshiba_acpi.poll_dev->input->swbit); + input_report_switch(toshiba_acpi.poll_dev->input, SW_RFKILL_ALL, TRUE); + + ret = input_register_polled_device(toshiba_acpi.poll_dev); + if (ret) { + printk(MY_ERR "unable to register kill-switch input device\n"); + rfkill_free(toshiba_acpi.rfk_dev); + toshiba_acpi.rfk_dev = NULL; + toshiba_acpi_exit(); + return ret; + } + + return 0; } module_init(toshiba_acpi_init); diff --git a/drivers/net/8139cp.c b/drivers/net/8139cp.c index 6011d6fabef..85fa40a0a66 100644 --- a/drivers/net/8139cp.c +++ b/drivers/net/8139cp.c @@ -127,7 +127,6 @@ MODULE_PARM_DESC (multicast_filter_limit, "8139cp: maximum number of filtered mu (CP)->tx_tail - (CP)->tx_head - 1) #define PKT_BUF_SZ 1536 /* Size of each temporary Rx buffer.*/ -#define RX_OFFSET 2 #define CP_INTERNAL_PHY 32 /* The following settings are log_2(bytes)-4: 0 == 16 bytes .. 6==1024, 7==end of packet. */ @@ -552,14 +551,14 @@ rx_status_loop: printk(KERN_DEBUG "%s: rx slot %d status 0x%x len %d\n", dev->name, rx_tail, status, len); - buflen = cp->rx_buf_sz + RX_OFFSET; - new_skb = dev_alloc_skb (buflen); + buflen = cp->rx_buf_sz + NET_IP_ALIGN; + new_skb = netdev_alloc_skb(dev, buflen); if (!new_skb) { dev->stats.rx_dropped++; goto rx_next; } - skb_reserve(new_skb, RX_OFFSET); + skb_reserve(new_skb, NET_IP_ALIGN); dma_unmap_single(&cp->pdev->dev, mapping, buflen, PCI_DMA_FROMDEVICE); @@ -1051,19 +1050,20 @@ static void cp_init_hw (struct cp_private *cp) cpw8_f(Cfg9346, Cfg9346_Lock); } -static int cp_refill_rx (struct cp_private *cp) +static int cp_refill_rx(struct cp_private *cp) { + struct net_device *dev = cp->dev; unsigned i; for (i = 0; i < CP_RX_RING_SIZE; i++) { struct sk_buff *skb; dma_addr_t mapping; - skb = dev_alloc_skb(cp->rx_buf_sz + RX_OFFSET); + skb = netdev_alloc_skb(dev, cp->rx_buf_sz + NET_IP_ALIGN); if (!skb) goto err_out; - skb_reserve(skb, RX_OFFSET); + skb_reserve(skb, NET_IP_ALIGN); mapping = dma_map_single(&cp->pdev->dev, skb->data, cp->rx_buf_sz, PCI_DMA_FROMDEVICE); diff --git a/drivers/net/8139too.c b/drivers/net/8139too.c index 8a5b0d293f7..f6ca99774cc 100644 --- a/drivers/net/8139too.c +++ b/drivers/net/8139too.c @@ -2009,9 +2009,9 @@ no_early_rx: /* Malloc up new buffer, compatible with net-2e. */ /* Omit the four octet CRC from the length. */ - skb = dev_alloc_skb (pkt_size + 2); + skb = netdev_alloc_skb(dev, pkt_size + NET_IP_ALIGN); if (likely(skb)) { - skb_reserve (skb, 2); /* 16 byte align the IP fields. */ + skb_reserve (skb, NET_IP_ALIGN); /* 16 byte align the IP fields. */ #if RX_BUF_IDX == 3 wrap_copy(skb, rx_ring, ring_offset+4, pkt_size); #else diff --git a/drivers/net/Makefile b/drivers/net/Makefile index 7629c901721..f66b79bd3b8 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -111,7 +111,7 @@ obj-$(CONFIG_EL2) += 3c503.o 8390p.o obj-$(CONFIG_NE2000) += ne.o 8390p.o obj-$(CONFIG_NE2_MCA) += ne2.o 8390p.o obj-$(CONFIG_HPLAN) += hp.o 8390p.o -obj-$(CONFIG_HPLAN_PLUS) += hp-plus.o 8390p.o +obj-$(CONFIG_HPLAN_PLUS) += hp-plus.o 8390.o obj-$(CONFIG_ULTRA) += smc-ultra.o 8390.o obj-$(CONFIG_ULTRAMCA) += smc-mca.o 8390.o obj-$(CONFIG_ULTRA32) += smc-ultra32.o 8390.o diff --git a/drivers/net/bonding/bond_alb.c b/drivers/net/bonding/bond_alb.c index b211486a0ca..3d39278a63e 100644 --- a/drivers/net/bonding/bond_alb.c +++ b/drivers/net/bonding/bond_alb.c @@ -710,7 +710,7 @@ static struct slave *rlb_arp_xmit(struct sk_buff *skb, struct bonding *bond) struct arp_pkt *arp = arp_pkt(skb); struct slave *tx_slave = NULL; - if (arp->op_code == __constant_htons(ARPOP_REPLY)) { + if (arp->op_code == htons(ARPOP_REPLY)) { /* the arp must be sent on the selected * rx channel */ @@ -719,7 +719,7 @@ static struct slave *rlb_arp_xmit(struct sk_buff *skb, struct bonding *bond) memcpy(arp->mac_src,tx_slave->dev->dev_addr, ETH_ALEN); } dprintk("Server sent ARP Reply packet\n"); - } else if (arp->op_code == __constant_htons(ARPOP_REQUEST)) { + } else if (arp->op_code == htons(ARPOP_REQUEST)) { /* Create an entry in the rx_hashtbl for this client as a * place holder. * When the arp reply is received the entry will be updated diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index c792138511e..babe4610c39 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -3702,7 +3702,7 @@ static int bond_xmit_hash_policy_l23(struct sk_buff *skb, struct ethhdr *data = (struct ethhdr *)skb->data; struct iphdr *iph = ip_hdr(skb); - if (skb->protocol == __constant_htons(ETH_P_IP)) { + if (skb->protocol == htons(ETH_P_IP)) { return ((ntohl(iph->saddr ^ iph->daddr) & 0xffff) ^ (data->h_dest[5] ^ bond_dev->dev_addr[5])) % count; } @@ -3723,8 +3723,8 @@ static int bond_xmit_hash_policy_l34(struct sk_buff *skb, __be16 *layer4hdr = (__be16 *)((u32 *)iph + iph->ihl); int layer4_xor = 0; - if (skb->protocol == __constant_htons(ETH_P_IP)) { - if (!(iph->frag_off & __constant_htons(IP_MF|IP_OFFSET)) && + if (skb->protocol == htons(ETH_P_IP)) { + if (!(iph->frag_off & htons(IP_MF|IP_OFFSET)) && (iph->protocol == IPPROTO_TCP || iph->protocol == IPPROTO_UDP)) { layer4_xor = ntohs((*layer4hdr ^ *(layer4hdr + 1))); diff --git a/drivers/net/e1000e/82571.c b/drivers/net/e1000e/82571.c index 462351ca2c8..b2c910c52df 100644 --- a/drivers/net/e1000e/82571.c +++ b/drivers/net/e1000e/82571.c @@ -38,6 +38,7 @@ * 82573V Gigabit Ethernet Controller (Copper) * 82573E Gigabit Ethernet Controller (Copper) * 82573L Gigabit Ethernet Controller + * 82574L Gigabit Network Connection */ #include <linux/netdevice.h> @@ -54,6 +55,8 @@ #define E1000_GCR_L1_ACT_WITHOUT_L0S_RX 0x08000000 +#define E1000_NVM_INIT_CTRL2_MNGM 0x6000 /* Manageability Operation Mode mask */ + static s32 e1000_get_phy_id_82571(struct e1000_hw *hw); static s32 e1000_setup_copper_link_82571(struct e1000_hw *hw); static s32 e1000_setup_fiber_serdes_link_82571(struct e1000_hw *hw); @@ -63,6 +66,8 @@ static s32 e1000_fix_nvm_checksum_82571(struct e1000_hw *hw); static void e1000_initialize_hw_bits_82571(struct e1000_hw *hw); static s32 e1000_setup_link_82571(struct e1000_hw *hw); static void e1000_clear_hw_cntrs_82571(struct e1000_hw *hw); +static bool e1000_check_mng_mode_82574(struct e1000_hw *hw); +static s32 e1000_led_on_82574(struct e1000_hw *hw); /** * e1000_init_phy_params_82571 - Init PHY func ptrs. @@ -92,6 +97,9 @@ static s32 e1000_init_phy_params_82571(struct e1000_hw *hw) case e1000_82573: phy->type = e1000_phy_m88; break; + case e1000_82574: + phy->type = e1000_phy_bm; + break; default: return -E1000_ERR_PHY; break; @@ -111,6 +119,10 @@ static s32 e1000_init_phy_params_82571(struct e1000_hw *hw) if (phy->id != M88E1111_I_PHY_ID) return -E1000_ERR_PHY; break; + case e1000_82574: + if (phy->id != BME1000_E_PHY_ID_R2) + return -E1000_ERR_PHY; + break; default: return -E1000_ERR_PHY; break; @@ -150,6 +162,7 @@ static s32 e1000_init_nvm_params_82571(struct e1000_hw *hw) switch (hw->mac.type) { case e1000_82573: + case e1000_82574: if (((eecd >> 15) & 0x3) == 0x3) { nvm->type = e1000_nvm_flash_hw; nvm->word_size = 2048; @@ -245,6 +258,17 @@ static s32 e1000_init_mac_params_82571(struct e1000_adapter *adapter) break; } + switch (hw->mac.type) { + case e1000_82574: + func->check_mng_mode = e1000_check_mng_mode_82574; + func->led_on = e1000_led_on_82574; + break; + default: + func->check_mng_mode = e1000e_check_mng_mode_generic; + func->led_on = e1000e_led_on_generic; + break; + } + return 0; } @@ -330,6 +354,8 @@ static s32 e1000_get_variants_82571(struct e1000_adapter *adapter) static s32 e1000_get_phy_id_82571(struct e1000_hw *hw) { struct e1000_phy_info *phy = &hw->phy; + s32 ret_val; + u16 phy_id = 0; switch (hw->mac.type) { case e1000_82571: @@ -345,6 +371,20 @@ static s32 e1000_get_phy_id_82571(struct e1000_hw *hw) case e1000_82573: return e1000e_get_phy_id(hw); break; + case e1000_82574: + ret_val = e1e_rphy(hw, PHY_ID1, &phy_id); + if (ret_val) + return ret_val; + + phy->id = (u32)(phy_id << 16); + udelay(20); + ret_val = e1e_rphy(hw, PHY_ID2, &phy_id); + if (ret_val) + return ret_val; + + phy->id |= (u32)(phy_id); + phy->revision = (u32)(phy_id & ~PHY_REVISION_MASK); + break; default: return -E1000_ERR_PHY; break; @@ -421,7 +461,7 @@ static s32 e1000_acquire_nvm_82571(struct e1000_hw *hw) if (ret_val) return ret_val; - if (hw->mac.type != e1000_82573) + if (hw->mac.type != e1000_82573 && hw->mac.type != e1000_82574) ret_val = e1000e_acquire_nvm(hw); if (ret_val) @@ -461,6 +501,7 @@ static s32 e1000_write_nvm_82571(struct e1000_hw *hw, u16 offset, u16 words, switch (hw->mac.type) { case e1000_82573: + case e1000_82574: ret_val = e1000_write_nvm_eewr_82571(hw, offset, words, data); break; case e1000_82571: @@ -735,7 +776,7 @@ static s32 e1000_reset_hw_82571(struct e1000_hw *hw) * Must acquire the MDIO ownership before MAC reset. * Ownership defaults to firmware after a reset. */ - if (hw->mac.type == e1000_82573) { + if (hw->mac.type == e1000_82573 || hw->mac.type == e1000_82574) { extcnf_ctrl = er32(EXTCNF_CTRL); extcnf_ctrl |= E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP; @@ -776,7 +817,7 @@ static s32 e1000_reset_hw_82571(struct e1000_hw *hw) * Need to wait for Phy configuration completion before accessing * NVM and Phy. */ - if (hw->mac.type == e1000_82573) + if (hw->mac.type == e1000_82573 || hw->mac.type == e1000_82574) msleep(25); /* Clear any pending interrupt events. */ @@ -843,7 +884,7 @@ static s32 e1000_init_hw_82571(struct e1000_hw *hw) ew32(TXDCTL(0), reg_data); /* ...for both queues. */ - if (mac->type != e1000_82573) { + if (mac->type != e1000_82573 && mac->type != e1000_82574) { reg_data = er32(TXDCTL(1)); reg_data = (reg_data & ~E1000_TXDCTL_WTHRESH) | E1000_TXDCTL_FULL_TX_DESC_WB | @@ -918,19 +959,28 @@ static void e1000_initialize_hw_bits_82571(struct e1000_hw *hw) } /* Device Control */ - if (hw->mac.type == e1000_82573) { + if (hw->mac.type == e1000_82573 || hw->mac.type == e1000_82574) { reg = er32(CTRL); reg &= ~(1 << 29); ew32(CTRL, reg); } /* Extended Device Control */ - if (hw->mac.type == e1000_82573) { + if (hw->mac.type == e1000_82573 || hw->mac.type == e1000_82574) { reg = er32(CTRL_EXT); reg &= ~(1 << 23); reg |= (1 << 22); ew32(CTRL_EXT, reg); } + + /* PCI-Ex Control Register */ + if (hw->mac.type == e1000_82574) { + reg = er32(GCR); + reg |= (1 << 22); + ew32(GCR, reg); + } + + return; } /** @@ -947,7 +997,7 @@ void e1000e_clear_vfta(struct e1000_hw *hw) u32 vfta_offset = 0; u32 vfta_bit_in_reg = 0; - if (hw->mac.type == e1000_82573) { + if (hw->mac.type == e1000_82573 || hw->mac.type == e1000_82574) { if (hw->mng_cookie.vlan_id != 0) { /* * The VFTA is a 4096b bit-field, each identifying @@ -976,6 +1026,48 @@ void e1000e_clear_vfta(struct e1000_hw *hw) } /** + * e1000_check_mng_mode_82574 - Check manageability is enabled + * @hw: pointer to the HW structure + * + * Reads the NVM Initialization Control Word 2 and returns true + * (>0) if any manageability is enabled, else false (0). + **/ +static bool e1000_check_mng_mode_82574(struct e1000_hw *hw) +{ + u16 data; + + e1000_read_nvm(hw, NVM_INIT_CONTROL2_REG, 1, &data); + return (data & E1000_NVM_INIT_CTRL2_MNGM) != 0; +} + +/** + * e1000_led_on_82574 - Turn LED on + * @hw: pointer to the HW structure + * + * Turn LED on. + **/ +static s32 e1000_led_on_82574(struct e1000_hw *hw) +{ + u32 ctrl; + u32 i; + + ctrl = hw->mac.ledctl_mode2; + if (!(E1000_STATUS_LU & er32(STATUS))) { + /* + * If no link, then turn LED on by setting the invert bit + * for each LED that's "on" (0x0E) in ledctl_mode2. + */ + for (i = 0; i < 4; i++) + if (((hw->mac.ledctl_mode2 >> (i * 8)) & 0xFF) == + E1000_LEDCTL_MODE_LED_ON) + ctrl |= (E1000_LEDCTL_LED0_IVRT << (i * 8)); + } + ew32(LEDCTL, ctrl); + + return 0; +} + +/** * e1000_update_mc_addr_list_82571 - Update Multicast addresses * @hw: pointer to the HW structure * @mc_addr_list: array of multicast addresses to program @@ -1018,7 +1110,8 @@ static s32 e1000_setup_link_82571(struct e1000_hw *hw) * the default flow control setting, so we explicitly * set it to full. */ - if (hw->mac.type == e1000_82573) + if ((hw->mac.type == e1000_82573 || hw->mac.type == e1000_82574) && + hw->fc.type == e1000_fc_default) hw->fc.type = e1000_fc_full; return e1000e_setup_link(hw); @@ -1045,6 +1138,7 @@ static s32 e1000_setup_copper_link_82571(struct e1000_hw *hw) switch (hw->phy.type) { case e1000_phy_m88: + case e1000_phy_bm: ret_val = e1000e_copper_link_setup_m88(hw); break; case e1000_phy_igp_2: @@ -1114,11 +1208,10 @@ static s32 e1000_valid_led_default_82571(struct e1000_hw *hw, u16 *data) return ret_val; } - if (hw->mac.type == e1000_82573 && + if ((hw->mac.type == e1000_82573 || hw->mac.type == e1000_82574) && *data == ID_LED_RESERVED_F746) *data = ID_LED_DEFAULT_82573; - else if (*data == ID_LED_RESERVED_0000 || - *data == ID_LED_RESERVED_FFFF) + else if (*data == ID_LED_RESERVED_0000 || *data == ID_LED_RESERVED_FFFF) *data = ID_LED_DEFAULT; return 0; @@ -1265,13 +1358,13 @@ static void e1000_clear_hw_cntrs_82571(struct e1000_hw *hw) } static struct e1000_mac_operations e82571_mac_ops = { - .mng_mode_enab = E1000_MNG_IAMT_MODE << E1000_FWSM_MODE_SHIFT, + /* .check_mng_mode: mac type dependent */ /* .check_for_link: media type dependent */ .cleanup_led = e1000e_cleanup_led_generic, .clear_hw_cntrs = e1000_clear_hw_cntrs_82571, .get_bus_info = e1000e_get_bus_info_pcie, /* .get_link_up_info: media type dependent */ - .led_on = e1000e_led_on_generic, + /* .led_on: mac type dependent */ .led_off = e1000e_led_off_generic, .update_mc_addr_list = e1000_update_mc_addr_list_82571, .reset_hw = e1000_reset_hw_82571, @@ -1312,6 +1405,22 @@ static struct e1000_phy_operations e82_phy_ops_m88 = { .write_phy_reg = e1000e_write_phy_reg_m88, }; +static struct e1000_phy_operations e82_phy_ops_bm = { + .acquire_phy = e1000_get_hw_semaphore_82571, + .check_reset_block = e1000e_check_reset_block_generic, + .commit_phy = e1000e_phy_sw_reset, + .force_speed_duplex = e1000e_phy_force_speed_duplex_m88, + .get_cfg_done = e1000e_get_cfg_done, + .get_cable_length = e1000e_get_cable_length_m88, + .get_phy_info = e1000e_get_phy_info_m88, + .read_phy_reg = e1000e_read_phy_reg_bm2, + .release_phy = e1000_put_hw_semaphore_82571, + .reset_phy = e1000e_phy_hw_reset_generic, + .set_d0_lplu_state = e1000_set_d0_lplu_state_82571, + .set_d3_lplu_state = e1000e_set_d3_lplu_state, + .write_phy_reg = e1000e_write_phy_reg_bm2, +}; + static struct e1000_nvm_operations e82571_nvm_ops = { .acquire_nvm = e1000_acquire_nvm_82571, .read_nvm = e1000e_read_nvm_eerd, @@ -1375,3 +1484,21 @@ struct e1000_info e1000_82573_info = { .nvm_ops = &e82571_nvm_ops, }; +struct e1000_info e1000_82574_info = { + .mac = e1000_82574, + .flags = FLAG_HAS_HW_VLAN_FILTER + | FLAG_HAS_MSIX + | FLAG_HAS_JUMBO_FRAMES + | FLAG_HAS_WOL + | FLAG_APME_IN_CTRL3 + | FLAG_RX_CSUM_ENABLED + | FLAG_HAS_SMART_POWER_DOWN + | FLAG_HAS_AMT + | FLAG_HAS_CTRLEXT_ON_LOAD, + .pba = 20, + .get_variants = e1000_get_variants_82571, + .mac_ops = &e82571_mac_ops, + .phy_ops = &e82_phy_ops_bm, + .nvm_ops = &e82571_nvm_ops, +}; + diff --git a/drivers/net/e1000e/defines.h b/drivers/net/e1000e/defines.h index 14b0e6cd3b8..48f79ecb82a 100644 --- a/drivers/net/e1000e/defines.h +++ b/drivers/net/e1000e/defines.h @@ -71,9 +71,11 @@ #define E1000_CTRL_EXT_RO_DIS 0x00020000 /* Relaxed Ordering disable */ #define E1000_CTRL_EXT_LINK_MODE_MASK 0x00C00000 #define E1000_CTRL_EXT_LINK_MODE_PCIE_SERDES 0x00C00000 +#define E1000_CTRL_EXT_EIAME 0x01000000 #define E1000_CTRL_EXT_DRV_LOAD 0x10000000 /* Driver loaded bit for FW */ #define E1000_CTRL_EXT_IAME 0x08000000 /* Interrupt acknowledge Auto-mask */ #define E1000_CTRL_EXT_INT_TIMER_CLR 0x20000000 /* Clear Interrupt timers after IMS clear */ +#define E1000_CTRL_EXT_PBA_CLR 0x80000000 /* PBA Clear */ /* Receive Descriptor bit definitions */ #define E1000_RXD_STAT_DD 0x01 /* Descriptor Done */ @@ -299,6 +301,7 @@ #define E1000_RXCSUM_IPPCSE 0x00001000 /* IP payload checksum enable */ /* Header split receive */ +#define E1000_RFCTL_ACK_DIS 0x00001000 #define E1000_RFCTL_EXTEN 0x00008000 #define E1000_RFCTL_IPV6_EX_DIS 0x00010000 #define E1000_RFCTL_NEW_IPV6_EXT_DIS 0x00020000 @@ -363,6 +366,11 @@ #define E1000_ICR_RXDMT0 0x00000010 /* Rx desc min. threshold (0) */ #define E1000_ICR_RXT0 0x00000080 /* Rx timer intr (ring 0) */ #define E1000_ICR_INT_ASSERTED 0x80000000 /* If this bit asserted, the driver should claim the interrupt */ +#define E1000_ICR_RXQ0 0x00100000 /* Rx Queue 0 Interrupt */ +#define E1000_ICR_RXQ1 0x00200000 /* Rx Queue 1 Interrupt */ +#define E1000_ICR_TXQ0 0x00400000 /* Tx Queue 0 Interrupt */ +#define E1000_ICR_TXQ1 0x00800000 /* Tx Queue 1 Interrupt */ +#define E1000_ICR_OTHER 0x01000000 /* Other Interrupts */ /* * This defines the bits that are set in the Interrupt Mask @@ -386,6 +394,11 @@ #define E1000_IMS_RXSEQ E1000_ICR_RXSEQ /* Rx sequence error */ #define E1000_IMS_RXDMT0 E1000_ICR_RXDMT0 /* Rx desc min. threshold */ #define E1000_IMS_RXT0 E1000_ICR_RXT0 /* Rx timer intr */ +#define E1000_IMS_RXQ0 E1000_ICR_RXQ0 /* Rx Queue 0 Interrupt */ +#define E1000_IMS_RXQ1 E1000_ICR_RXQ1 /* Rx Queue 1 Interrupt */ +#define E1000_IMS_TXQ0 E1000_ICR_TXQ0 /* Tx Queue 0 Interrupt */ +#define E1000_IMS_TXQ1 E1000_ICR_TXQ1 /* Tx Queue 1 Interrupt */ +#define E1000_IMS_OTHER E1000_ICR_OTHER /* Other Interrupts */ /* Interrupt Cause Set */ #define E1000_ICS_LSC E1000_ICR_LSC /* Link Status Change */ @@ -505,6 +518,7 @@ #define NWAY_LPAR_ASM_DIR 0x0800 /* LP Asymmetric Pause Direction bit */ /* Autoneg Expansion Register */ +#define NWAY_ER_LP_NWAY_CAPS 0x0001 /* LP has Auto Neg Capability */ /* 1000BASE-T Control Register */ #define CR_1000T_HD_CAPS 0x0100 /* Advertise 1000T HD capability */ @@ -540,6 +554,7 @@ #define E1000_EECD_DO 0x00000008 /* NVM Data Out */ #define E1000_EECD_REQ 0x00000040 /* NVM Access Request */ #define E1000_EECD_GNT 0x00000080 /* NVM Access Grant */ +#define E1000_EECD_PRES 0x00000100 /* NVM Present */ #define E1000_EECD_SIZE 0x00000200 /* NVM Size (0=64 word 1=256 word) */ /* NVM Addressing bits based on type (0-small, 1-large) */ #define E1000_EECD_ADDR_BITS 0x00000400 diff --git a/drivers/net/e1000e/e1000.h b/drivers/net/e1000e/e1000.h index ac4e506b4f8..0a1916b0419 100644 --- a/drivers/net/e1000e/e1000.h +++ b/drivers/net/e1000e/e1000.h @@ -62,6 +62,11 @@ struct e1000_info; e_printk(KERN_NOTICE, adapter, format, ## arg) +/* Interrupt modes, as used by the IntMode paramter */ +#define E1000E_INT_MODE_LEGACY 0 +#define E1000E_INT_MODE_MSI 1 +#define E1000E_INT_MODE_MSIX 2 + /* Tx/Rx descriptor defines */ #define E1000_DEFAULT_TXD 256 #define E1000_MAX_TXD 4096 @@ -95,9 +100,11 @@ enum e1000_boards { board_82571, board_82572, board_82573, + board_82574, board_80003es2lan, board_ich8lan, board_ich9lan, + board_ich10lan, }; struct e1000_queue_stats { @@ -146,6 +153,12 @@ struct e1000_ring { /* array of buffer information structs */ struct e1000_buffer *buffer_info; + char name[IFNAMSIZ + 5]; + u32 ims_val; + u32 itr_val; + u16 itr_register; + int set_itr; + struct sk_buff *rx_skb_top; struct e1000_queue_stats stats; @@ -274,6 +287,9 @@ struct e1000_adapter { u32 test_icr; u32 msg_enable; + struct msix_entry *msix_entries; + int int_mode; + u32 eiac_mask; u32 eeprom_wol; u32 wol; @@ -306,6 +322,7 @@ struct e1000_info { #define FLAG_HAS_SWSM_ON_LOAD (1 << 6) #define FLAG_HAS_JUMBO_FRAMES (1 << 7) #define FLAG_IS_ICH (1 << 9) +#define FLAG_HAS_MSIX (1 << 10) #define FLAG_HAS_SMART_POWER_DOWN (1 << 11) #define FLAG_IS_QUAD_PORT_A (1 << 12) #define FLAG_IS_QUAD_PORT (1 << 13) @@ -364,6 +381,8 @@ extern int e1000e_setup_tx_resources(struct e1000_adapter *adapter); extern void e1000e_free_rx_resources(struct e1000_adapter *adapter); extern void e1000e_free_tx_resources(struct e1000_adapter *adapter); extern void e1000e_update_stats(struct e1000_adapter *adapter); +extern void e1000e_set_interrupt_capability(struct e1000_adapter *adapter); +extern void e1000e_reset_interrupt_capability(struct e1000_adapter *adapter); extern unsigned int copybreak; @@ -372,8 +391,10 @@ extern char *e1000e_get_hw_dev_name(struct e1000_hw *hw); extern struct e1000_info e1000_82571_info; extern struct e1000_info e1000_82572_info; extern struct e1000_info e1000_82573_info; +extern struct e1000_info e1000_82574_info; extern struct e1000_info e1000_ich8_info; extern struct e1000_info e1000_ich9_info; +extern struct e1000_info e1000_ich10_info; extern struct e1000_info e1000_es2_info; extern s32 e1000e_read_pba_num(struct e1000_hw *hw, u32 *pba_num); @@ -446,10 +467,13 @@ extern s32 e1000e_get_cable_length_m88(struct e1000_hw *hw); extern s32 e1000e_get_phy_info_m88(struct e1000_hw *hw); extern s32 e1000e_read_phy_reg_m88(struct e1000_hw *hw, u32 offset, u16 *data); extern s32 e1000e_write_phy_reg_m88(struct e1000_hw *hw, u32 offset, u16 data); +extern s32 e1000e_phy_init_script_igp3(struct e1000_hw *hw); extern enum e1000_phy_type e1000e_get_phy_type_from_id(u32 phy_id); extern s32 e1000e_determine_phy_address(struct e1000_hw *hw); extern s32 e1000e_write_phy_reg_bm(struct e1000_hw *hw, u32 offset, u16 data); extern s32 e1000e_read_phy_reg_bm(struct e1000_hw *hw, u32 offset, u16 *data); +extern s32 e1000e_read_phy_reg_bm2(struct e1000_hw *hw, u32 offset, u16 *data); +extern s32 e1000e_write_phy_reg_bm2(struct e1000_hw *hw, u32 offset, u16 data); extern void e1000e_phy_force_speed_duplex_setup(struct e1000_hw *hw, u16 *phy_ctrl); extern s32 e1000e_write_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 data); extern s32 e1000e_read_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 *data); @@ -520,7 +544,12 @@ static inline s32 e1000_get_phy_info(struct e1000_hw *hw) return hw->phy.ops.get_phy_info(hw); } -extern bool e1000e_check_mng_mode(struct e1000_hw *hw); +static inline s32 e1000e_check_mng_mode(struct e1000_hw *hw) +{ + return hw->mac.ops.check_mng_mode(hw); +} + +extern bool e1000e_check_mng_mode_generic(struct e1000_hw *hw); extern bool e1000e_enable_tx_pkt_filtering(struct e1000_hw *hw); extern s32 e1000e_mng_write_dhcp_info(struct e1000_hw *hw, u8 *buffer, u16 length); diff --git a/drivers/net/e1000e/es2lan.c b/drivers/net/e1000e/es2lan.c index dc552d7d6fa..da9c09c248e 100644 --- a/drivers/net/e1000e/es2lan.c +++ b/drivers/net/e1000e/es2lan.c @@ -1247,7 +1247,7 @@ static void e1000_clear_hw_cntrs_80003es2lan(struct e1000_hw *hw) } static struct e1000_mac_operations es2_mac_ops = { - .mng_mode_enab = E1000_MNG_IAMT_MODE << E1000_FWSM_MODE_SHIFT, + .check_mng_mode = e1000e_check_mng_mode_generic, /* check_for_link dependent on media type */ .cleanup_led = e1000e_cleanup_led_generic, .clear_hw_cntrs = e1000_clear_hw_cntrs_80003es2lan, diff --git a/drivers/net/e1000e/ethtool.c b/drivers/net/e1000e/ethtool.c index e21c9e0f373..52b762eb174 100644 --- a/drivers/net/e1000e/ethtool.c +++ b/drivers/net/e1000e/ethtool.c @@ -568,6 +568,7 @@ static int e1000_set_eeprom(struct net_device *netdev, * and flush shadow RAM for 82573 controllers */ if ((ret_val == 0) && ((first_word <= NVM_CHECKSUM_REG) || + (hw->mac.type == e1000_82574) || (hw->mac.type == e1000_82573))) e1000e_update_nvm_checksum(hw); @@ -779,8 +780,10 @@ static int e1000_reg_test(struct e1000_adapter *adapter, u64 *data) toggle = 0x7FFFF3FF; break; case e1000_82573: + case e1000_82574: case e1000_ich8lan: case e1000_ich9lan: + case e1000_ich10lan: toggle = 0x7FFFF033; break; default: @@ -833,7 +836,9 @@ static int e1000_reg_test(struct e1000_adapter *adapter, u64 *data) REG_PATTERN_TEST(E1000_TIDV, 0x0000FFFF, 0x0000FFFF); for (i = 0; i < mac->rar_entry_count; i++) REG_PATTERN_TEST_ARRAY(E1000_RA, ((i << 1) + 1), - 0x8003FFFF, 0xFFFFFFFF); + ((mac->type == e1000_ich10lan) ? + 0x8007FFFF : 0x8003FFFF), + 0xFFFFFFFF); for (i = 0; i < mac->mta_reg_count; i++) REG_PATTERN_TEST_ARRAY(E1000_MTA, i, 0xFFFFFFFF, 0xFFFFFFFF); @@ -884,10 +889,18 @@ static int e1000_intr_test(struct e1000_adapter *adapter, u64 *data) u32 shared_int = 1; u32 irq = adapter->pdev->irq; int i; + int ret_val = 0; + int int_mode = E1000E_INT_MODE_LEGACY; *data = 0; - /* NOTE: we don't test MSI interrupts here, yet */ + /* NOTE: we don't test MSI/MSI-X interrupts here, yet */ + if (adapter->int_mode == E1000E_INT_MODE_MSIX) { + int_mode = adapter->int_mode; + e1000e_reset_interrupt_capability(adapter); + adapter->int_mode = E1000E_INT_MODE_LEGACY; + e1000e_set_interrupt_capability(adapter); + } /* Hook up test interrupt handler just for this test */ if (!request_irq(irq, &e1000_test_intr, IRQF_PROBE_SHARED, netdev->name, netdev)) { @@ -895,7 +908,8 @@ static int e1000_intr_test(struct e1000_adapter *adapter, u64 *data) } else if (request_irq(irq, &e1000_test_intr, IRQF_SHARED, netdev->name, netdev)) { *data = 1; - return -1; + ret_val = -1; + goto out; } e_info("testing %s interrupt\n", (shared_int ? "shared" : "unshared")); @@ -905,12 +919,23 @@ static int e1000_intr_test(struct e1000_adapter *adapter, u64 *data) /* Test each interrupt */ for (i = 0; i < 10; i++) { - if ((adapter->flags & FLAG_IS_ICH) && (i == 8)) - continue; - /* Interrupt to test */ mask = 1 << i; + if (adapter->flags & FLAG_IS_ICH) { + switch (mask) { + case E1000_ICR_RXSEQ: + continue; + case 0x00000100: + if (adapter->hw.mac.type == e1000_ich8lan || + adapter->hw.mac.type == e1000_ich9lan) + continue; + break; + default: + break; + } + } + if (!shared_int) { /* * Disable the interrupt to be reported in @@ -974,7 +999,14 @@ static int e1000_intr_test(struct e1000_adapter *adapter, u64 *data) /* Unhook test interrupt handler */ free_irq(irq, netdev); - return *data; +out: + if (int_mode == E1000E_INT_MODE_MSIX) { + e1000e_reset_interrupt_capability(adapter); + adapter->int_mode = int_mode; + e1000e_set_interrupt_capability(adapter); + } + + return ret_val; } static void e1000_free_desc_rings(struct e1000_adapter *adapter) @@ -1755,11 +1787,13 @@ static void e1000_led_blink_callback(unsigned long data) static int e1000_phys_id(struct net_device *netdev, u32 data) { struct e1000_adapter *adapter = netdev_priv(netdev); + struct e1000_hw *hw = &adapter->hw; if (!data) data = INT_MAX; - if (adapter->hw.phy.type == e1000_phy_ife) { + if ((hw->phy.type == e1000_phy_ife) || + (hw->mac.type == e1000_82574)) { if (!adapter->blink_timer.function) { init_timer(&adapter->blink_timer); adapter->blink_timer.function = @@ -1769,16 +1803,16 @@ static int e1000_phys_id(struct net_device *netdev, u32 data) mod_timer(&adapter->blink_timer, jiffies); msleep_interruptible(data * 1000); del_timer_sync(&adapter->blink_timer); - e1e_wphy(&adapter->hw, - IFE_PHY_SPECIAL_CONTROL_LED, 0); + if (hw->phy.type == e1000_phy_ife) + e1e_wphy(hw, IFE_PHY_SPECIAL_CONTROL_LED, 0); } else { - e1000e_blink_led(&adapter->hw); + e1000e_blink_led(hw); msleep_interruptible(data * 1000); } - adapter->hw.mac.ops.led_off(&adapter->hw); + hw->mac.ops.led_off(hw); clear_bit(E1000_LED_ON, &adapter->led_status); - adapter->hw.mac.ops.cleanup_led(&adapter->hw); + hw->mac.ops.cleanup_led(hw); return 0; } diff --git a/drivers/net/e1000e/hw.h b/drivers/net/e1000e/hw.h index 74f263acb17..f66ed37a7f7 100644 --- a/drivers/net/e1000e/hw.h +++ b/drivers/net/e1000e/hw.h @@ -65,7 +65,11 @@ enum e1e_registers { E1000_ICS = 0x000C8, /* Interrupt Cause Set - WO */ E1000_IMS = 0x000D0, /* Interrupt Mask Set - RW */ E1000_IMC = 0x000D8, /* Interrupt Mask Clear - WO */ + E1000_EIAC_82574 = 0x000DC, /* Ext. Interrupt Auto Clear - RW */ E1000_IAM = 0x000E0, /* Interrupt Acknowledge Auto Mask */ + E1000_IVAR = 0x000E4, /* Interrupt Vector Allocation - RW */ + E1000_EITR_82574_BASE = 0x000E8, /* Interrupt Throttling - RW */ +#define E1000_EITR_82574(_n) (E1000_EITR_82574_BASE + (_n << 2)) E1000_RCTL = 0x00100, /* Rx Control - RW */ E1000_FCTTV = 0x00170, /* Flow Control Transmit Timer Value - RW */ E1000_TXCW = 0x00178, /* Tx Configuration Word - RW */ @@ -332,6 +336,7 @@ enum e1e_registers { #define E1000_DEV_ID_82573E 0x108B #define E1000_DEV_ID_82573E_IAMT 0x108C #define E1000_DEV_ID_82573L 0x109A +#define E1000_DEV_ID_82574L 0x10D3 #define E1000_DEV_ID_80003ES2LAN_COPPER_DPT 0x1096 #define E1000_DEV_ID_80003ES2LAN_SERDES_DPT 0x1098 @@ -346,6 +351,7 @@ enum e1e_registers { #define E1000_DEV_ID_ICH8_IFE_G 0x10C5 #define E1000_DEV_ID_ICH8_IGP_M 0x104D #define E1000_DEV_ID_ICH9_IGP_AMT 0x10BD +#define E1000_DEV_ID_ICH9_BM 0x10E5 #define E1000_DEV_ID_ICH9_IGP_M_AMT 0x10F5 #define E1000_DEV_ID_ICH9_IGP_M 0x10BF #define E1000_DEV_ID_ICH9_IGP_M_V 0x10CB @@ -356,6 +362,10 @@ enum e1e_registers { #define E1000_DEV_ID_ICH10_R_BM_LM 0x10CC #define E1000_DEV_ID_ICH10_R_BM_LF 0x10CD #define E1000_DEV_ID_ICH10_R_BM_V 0x10CE +#define E1000_DEV_ID_ICH10_D_BM_LM 0x10DE +#define E1000_DEV_ID_ICH10_D_BM_LF 0x10DF + +#define E1000_REVISION_4 4 #define E1000_FUNC_1 1 @@ -363,9 +373,11 @@ enum e1000_mac_type { e1000_82571, e1000_82572, e1000_82573, + e1000_82574, e1000_80003es2lan, e1000_ich8lan, e1000_ich9lan, + e1000_ich10lan, }; enum e1000_media_type { @@ -696,8 +708,7 @@ struct e1000_host_mng_command_info { /* Function pointers and static data for the MAC. */ struct e1000_mac_operations { - u32 mng_mode_enab; - + bool (*check_mng_mode)(struct e1000_hw *); s32 (*check_for_link)(struct e1000_hw *); s32 (*cleanup_led)(struct e1000_hw *); void (*clear_hw_cntrs)(struct e1000_hw *); diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c index 9e38452a738..019b9c0bcdc 100644 --- a/drivers/net/e1000e/ich8lan.c +++ b/drivers/net/e1000e/ich8lan.c @@ -43,7 +43,9 @@ * 82567LM-2 Gigabit Network Connection * 82567LF-2 Gigabit Network Connection * 82567V-2 Gigabit Network Connection - * 82562GT-3 10/100 Network Connection + * 82567LF-3 Gigabit Network Connection + * 82567LM-3 Gigabit Network Connection + * 82567LM-4 Gigabit Network Connection */ #include <linux/netdevice.h> @@ -157,12 +159,15 @@ static s32 e1000_check_polarity_ife_ich8lan(struct e1000_hw *hw); static s32 e1000_erase_flash_bank_ich8lan(struct e1000_hw *hw, u32 bank); static s32 e1000_retry_write_flash_byte_ich8lan(struct e1000_hw *hw, u32 offset, u8 byte); +static s32 e1000_read_flash_byte_ich8lan(struct e1000_hw *hw, u32 offset, + u8 *data); static s32 e1000_read_flash_word_ich8lan(struct e1000_hw *hw, u32 offset, u16 *data); static s32 e1000_read_flash_data_ich8lan(struct e1000_hw *hw, u32 offset, u8 size, u16 *data); static s32 e1000_setup_copper_link_ich8lan(struct e1000_hw *hw); static s32 e1000_kmrn_lock_loss_workaround_ich8lan(struct e1000_hw *hw); +static s32 e1000_get_cfg_done_ich8lan(struct e1000_hw *hw); static inline u16 __er16flash(struct e1000_hw *hw, unsigned long reg) { @@ -417,6 +422,22 @@ static void e1000_release_swflag_ich8lan(struct e1000_hw *hw) } /** + * e1000_check_mng_mode_ich8lan - Checks management mode + * @hw: pointer to the HW structure + * + * This checks if the adapter has manageability enabled. + * This is a function pointer entry point only called by read/write + * routines for the PHY and NVM parts. + **/ +static bool e1000_check_mng_mode_ich8lan(struct e1000_hw *hw) +{ + u32 fwsm = er32(FWSM); + + return (fwsm & E1000_FWSM_MODE_MASK) == + (E1000_ICH_MNG_IAMT_MODE << E1000_FWSM_MODE_SHIFT); +} + +/** * e1000_check_reset_block_ich8lan - Check if PHY reset is blocked * @hw: pointer to the HW structure * @@ -897,6 +918,56 @@ static s32 e1000_set_d3_lplu_state_ich8lan(struct e1000_hw *hw, bool active) } /** + * e1000_valid_nvm_bank_detect_ich8lan - finds out the valid bank 0 or 1 + * @hw: pointer to the HW structure + * @bank: pointer to the variable that returns the active bank + * + * Reads signature byte from the NVM using the flash access registers. + **/ +static s32 e1000_valid_nvm_bank_detect_ich8lan(struct e1000_hw *hw, u32 *bank) +{ + struct e1000_nvm_info *nvm = &hw->nvm; + /* flash bank size is in words */ + u32 bank1_offset = nvm->flash_bank_size * sizeof(u16); + u32 act_offset = E1000_ICH_NVM_SIG_WORD * 2 + 1; + u8 bank_high_byte = 0; + + if (hw->mac.type != e1000_ich10lan) { + if (er32(EECD) & E1000_EECD_SEC1VAL) + *bank = 1; + else + *bank = 0; + } else { + /* + * Make sure the signature for bank 0 is valid, + * if not check for bank1 + */ + e1000_read_flash_byte_ich8lan(hw, act_offset, &bank_high_byte); + if ((bank_high_byte & 0xC0) == 0x80) { + *bank = 0; + } else { + /* + * find if segment 1 is valid by verifying + * bit 15:14 = 10b in word 0x13 + */ + e1000_read_flash_byte_ich8lan(hw, + act_offset + bank1_offset, + &bank_high_byte); + + /* bank1 has a valid signature equivalent to SEC1V */ + if ((bank_high_byte & 0xC0) == 0x80) { + *bank = 1; + } else { + hw_dbg(hw, "ERROR: EEPROM not present\n"); + return -E1000_ERR_NVM; + } + } + } + + return 0; +} + +/** * e1000_read_nvm_ich8lan - Read word(s) from the NVM * @hw: pointer to the HW structure * @offset: The offset (in bytes) of the word(s) to read. @@ -912,6 +983,7 @@ static s32 e1000_read_nvm_ich8lan(struct e1000_hw *hw, u16 offset, u16 words, struct e1000_dev_spec_ich8lan *dev_spec = &hw->dev_spec.ich8lan; u32 act_offset; s32 ret_val; + u32 bank = 0; u16 i, word; if ((offset >= nvm->word_size) || (words > nvm->word_size - offset) || @@ -924,10 +996,11 @@ static s32 e1000_read_nvm_ich8lan(struct e1000_hw *hw, u16 offset, u16 words, if (ret_val) return ret_val; - /* Start with the bank offset, then add the relative offset. */ - act_offset = (er32(EECD) & E1000_EECD_SEC1VAL) - ? nvm->flash_bank_size - : 0; + ret_val = e1000_valid_nvm_bank_detect_ich8lan(hw, &bank); + if (ret_val) + return ret_val; + + act_offset = (bank) ? nvm->flash_bank_size : 0; act_offset += offset; for (i = 0; i < words; i++) { @@ -1075,6 +1148,29 @@ static s32 e1000_read_flash_word_ich8lan(struct e1000_hw *hw, u32 offset, } /** + * e1000_read_flash_byte_ich8lan - Read byte from flash + * @hw: pointer to the HW structure + * @offset: The offset of the byte to read. + * @data: Pointer to a byte to store the value read. + * + * Reads a single byte from the NVM using the flash access registers. + **/ +static s32 e1000_read_flash_byte_ich8lan(struct e1000_hw *hw, u32 offset, + u8 *data) +{ + s32 ret_val; + u16 word = 0; + + ret_val = e1000_read_flash_data_ich8lan(hw, offset, 1, &word); + if (ret_val) + return ret_val; + + *data = (u8)word; + + return 0; +} + +/** * e1000_read_flash_data_ich8lan - Read byte or word from NVM * @hw: pointer to the HW structure * @offset: The offset (in bytes) of the byte or word to read. @@ -1205,7 +1301,7 @@ static s32 e1000_update_nvm_checksum_ich8lan(struct e1000_hw *hw) { struct e1000_nvm_info *nvm = &hw->nvm; struct e1000_dev_spec_ich8lan *dev_spec = &hw->dev_spec.ich8lan; - u32 i, act_offset, new_bank_offset, old_bank_offset; + u32 i, act_offset, new_bank_offset, old_bank_offset, bank; s32 ret_val; u16 data; @@ -1225,7 +1321,11 @@ static s32 e1000_update_nvm_checksum_ich8lan(struct e1000_hw *hw) * write to bank 0 etc. We also need to erase the segment that * is going to be written */ - if (!(er32(EECD) & E1000_EECD_SEC1VAL)) { + ret_val = e1000_valid_nvm_bank_detect_ich8lan(hw, &bank); + if (ret_val) + return ret_val; + + if (bank == 0) { new_bank_offset = nvm->flash_bank_size; old_bank_offset = 0; e1000_erase_flash_bank_ich8lan(hw, 1); @@ -2189,13 +2289,14 @@ void e1000e_gig_downshift_workaround_ich8lan(struct e1000_hw *hw) * 'LPLU Enabled' and 'Gig Disable' to force link speed negotiation * to a lower speed. * - * Should only be called for ICH9 devices. + * Should only be called for ICH9 and ICH10 devices. **/ void e1000e_disable_gig_wol_ich8lan(struct e1000_hw *hw) { u32 phy_ctrl; - if (hw->mac.type == e1000_ich9lan) { + if ((hw->mac.type == e1000_ich10lan) || + (hw->mac.type == e1000_ich9lan)) { phy_ctrl = er32(PHY_CTRL); phy_ctrl |= E1000_PHY_CTRL_D0A_LPLU | E1000_PHY_CTRL_GBE_DISABLE; @@ -2253,6 +2354,39 @@ static s32 e1000_led_off_ich8lan(struct e1000_hw *hw) } /** + * e1000_get_cfg_done_ich8lan - Read config done bit + * @hw: pointer to the HW structure + * + * Read the management control register for the config done bit for + * completion status. NOTE: silicon which is EEPROM-less will fail trying + * to read the config done bit, so an error is *ONLY* logged and returns + * E1000_SUCCESS. If we were to return with error, EEPROM-less silicon + * would not be able to be reset or change link. + **/ +static s32 e1000_get_cfg_done_ich8lan(struct e1000_hw *hw) +{ + u32 bank = 0; + + e1000e_get_cfg_done(hw); + + /* If EEPROM is not marked present, init the IGP 3 PHY manually */ + if (hw->mac.type != e1000_ich10lan) { + if (((er32(EECD) & E1000_EECD_PRES) == 0) && + (hw->phy.type == e1000_phy_igp_3)) { + e1000e_phy_init_script_igp3(hw); + } + } else { + if (e1000_valid_nvm_bank_detect_ich8lan(hw, &bank)) { + /* Maybe we should do a basic PHY config */ + hw_dbg(hw, "EEPROM not present\n"); + return -E1000_ERR_CONFIG; + } + } + + return 0; +} + +/** * e1000_clear_hw_cntrs_ich8lan - Clear statistical counters * @hw: pointer to the HW structure * @@ -2282,7 +2416,7 @@ static void e1000_clear_hw_cntrs_ich8lan(struct e1000_hw *hw) } static struct e1000_mac_operations ich8_mac_ops = { - .mng_mode_enab = E1000_ICH_MNG_IAMT_MODE << E1000_FWSM_MODE_SHIFT, + .check_mng_mode = e1000_check_mng_mode_ich8lan, .check_for_link = e1000e_check_for_copper_link, .cleanup_led = e1000_cleanup_led_ich8lan, .clear_hw_cntrs = e1000_clear_hw_cntrs_ich8lan, @@ -2302,7 +2436,7 @@ static struct e1000_phy_operations ich8_phy_ops = { .check_reset_block = e1000_check_reset_block_ich8lan, .commit_phy = NULL, .force_speed_duplex = e1000_phy_force_speed_duplex_ich8lan, - .get_cfg_done = e1000e_get_cfg_done, + .get_cfg_done = e1000_get_cfg_done_ich8lan, .get_cable_length = e1000e_get_cable_length_igp_2, .get_phy_info = e1000_get_phy_info_ich8lan, .read_phy_reg = e1000e_read_phy_reg_igp, @@ -2357,3 +2491,20 @@ struct e1000_info e1000_ich9_info = { .nvm_ops = &ich8_nvm_ops, }; +struct e1000_info e1000_ich10_info = { + .mac = e1000_ich10lan, + .flags = FLAG_HAS_JUMBO_FRAMES + | FLAG_IS_ICH + | FLAG_HAS_WOL + | FLAG_RX_CSUM_ENABLED + | FLAG_HAS_CTRLEXT_ON_LOAD + | FLAG_HAS_AMT + | FLAG_HAS_ERT + | FLAG_HAS_FLASH + | FLAG_APME_IN_WUC, + .pba = 10, + .get_variants = e1000_get_variants_ich8lan, + .mac_ops = &ich8_mac_ops, + .phy_ops = &ich8_phy_ops, + .nvm_ops = &ich8_nvm_ops, +}; diff --git a/drivers/net/e1000e/lib.c b/drivers/net/e1000e/lib.c index f1f4e9dfd0a..c7337306ffa 100644 --- a/drivers/net/e1000e/lib.c +++ b/drivers/net/e1000e/lib.c @@ -2222,17 +2222,18 @@ static s32 e1000_mng_enable_host_if(struct e1000_hw *hw) } /** - * e1000e_check_mng_mode - check management mode + * e1000e_check_mng_mode_generic - check management mode * @hw: pointer to the HW structure * * Reads the firmware semaphore register and returns true (>0) if * manageability is enabled, else false (0). **/ -bool e1000e_check_mng_mode(struct e1000_hw *hw) +bool e1000e_check_mng_mode_generic(struct e1000_hw *hw) { u32 fwsm = er32(FWSM); - return (fwsm & E1000_FWSM_MODE_MASK) == hw->mac.ops.mng_mode_enab; + return (fwsm & E1000_FWSM_MODE_MASK) == + (E1000_MNG_IAMT_MODE << E1000_FWSM_MODE_SHIFT); } /** diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c index d266510c8a9..0925204cd2d 100644 --- a/drivers/net/e1000e/netdev.c +++ b/drivers/net/e1000e/netdev.c @@ -55,9 +55,11 @@ static const struct e1000_info *e1000_info_tbl[] = { [board_82571] = &e1000_82571_info, [board_82572] = &e1000_82572_info, [board_82573] = &e1000_82573_info, + [board_82574] = &e1000_82574_info, [board_80003es2lan] = &e1000_es2_info, [board_ich8lan] = &e1000_ich8_info, [board_ich9lan] = &e1000_ich9_info, + [board_ich10lan] = &e1000_ich10_info, }; #ifdef DEBUG @@ -1179,8 +1181,8 @@ static irqreturn_t e1000_intr(int irq, void *data) struct net_device *netdev = data; struct e1000_adapter *adapter = netdev_priv(netdev); struct e1000_hw *hw = &adapter->hw; - u32 rctl, icr = er32(ICR); + if (!icr) return IRQ_NONE; /* Not our interrupt */ @@ -1236,6 +1238,263 @@ static irqreturn_t e1000_intr(int irq, void *data) return IRQ_HANDLED; } +static irqreturn_t e1000_msix_other(int irq, void *data) +{ + struct net_device *netdev = data; + struct e1000_adapter *adapter = netdev_priv(netdev); + struct e1000_hw *hw = &adapter->hw; + u32 icr = er32(ICR); + + if (!(icr & E1000_ICR_INT_ASSERTED)) { + ew32(IMS, E1000_IMS_OTHER); + return IRQ_NONE; + } + + if (icr & adapter->eiac_mask) + ew32(ICS, (icr & adapter->eiac_mask)); + + if (icr & E1000_ICR_OTHER) { + if (!(icr & E1000_ICR_LSC)) + goto no_link_interrupt; + hw->mac.get_link_status = 1; + /* guard against interrupt when we're going down */ + if (!test_bit(__E1000_DOWN, &adapter->state)) + mod_timer(&adapter->watchdog_timer, jiffies + 1); + } + +no_link_interrupt: + ew32(IMS, E1000_IMS_LSC | E1000_IMS_OTHER); + + return IRQ_HANDLED; +} + + +static irqreturn_t e1000_intr_msix_tx(int irq, void *data) +{ + struct net_device *netdev = data; + struct e1000_adapter *adapter = netdev_priv(netdev); + struct e1000_hw *hw = &adapter->hw; + struct e1000_ring *tx_ring = adapter->tx_ring; + + + adapter->total_tx_bytes = 0; + adapter->total_tx_packets = 0; + + if (!e1000_clean_tx_irq(adapter)) + /* Ring was not completely cleaned, so fire another interrupt */ + ew32(ICS, tx_ring->ims_val); + + return IRQ_HANDLED; +} + +static irqreturn_t e1000_intr_msix_rx(int irq, void *data) +{ + struct net_device *netdev = data; + struct e1000_adapter *adapter = netdev_priv(netdev); + + /* Write the ITR value calculated at the end of the + * previous interrupt. + */ + if (adapter->rx_ring->set_itr) { + writel(1000000000 / (adapter->rx_ring->itr_val * 256), + adapter->hw.hw_addr + adapter->rx_ring->itr_register); + adapter->rx_ring->set_itr = 0; + } + + if (netif_rx_schedule_prep(netdev, &adapter->napi)) { + adapter->total_rx_bytes = 0; + adapter->total_rx_packets = 0; + __netif_rx_schedule(netdev, &adapter->napi); + } + return IRQ_HANDLED; +} + +/** + * e1000_configure_msix - Configure MSI-X hardware + * + * e1000_configure_msix sets up the hardware to properly + * generate MSI-X interrupts. + **/ +static void e1000_configure_msix(struct e1000_adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + struct e1000_ring *rx_ring = adapter->rx_ring; + struct e1000_ring *tx_ring = adapter->tx_ring; + int vector = 0; + u32 ctrl_ext, ivar = 0; + + adapter->eiac_mask = 0; + + /* Workaround issue with spurious interrupts on 82574 in MSI-X mode */ + if (hw->mac.type == e1000_82574) { + u32 rfctl = er32(RFCTL); + rfctl |= E1000_RFCTL_ACK_DIS; + ew32(RFCTL, rfctl); + } + +#define E1000_IVAR_INT_ALLOC_VALID 0x8 + /* Configure Rx vector */ + rx_ring->ims_val = E1000_IMS_RXQ0; + adapter->eiac_mask |= rx_ring->ims_val; + if (rx_ring->itr_val) + writel(1000000000 / (rx_ring->itr_val * 256), + hw->hw_addr + rx_ring->itr_register); + else + writel(1, hw->hw_addr + rx_ring->itr_register); + ivar = E1000_IVAR_INT_ALLOC_VALID | vector; + + /* Configure Tx vector */ + tx_ring->ims_val = E1000_IMS_TXQ0; + vector++; + if (tx_ring->itr_val) + writel(1000000000 / (tx_ring->itr_val * 256), + hw->hw_addr + tx_ring->itr_register); + else + writel(1, hw->hw_addr + tx_ring->itr_register); + adapter->eiac_mask |= tx_ring->ims_val; + ivar |= ((E1000_IVAR_INT_ALLOC_VALID | vector) << 8); + + /* set vector for Other Causes, e.g. link changes */ + vector++; + ivar |= ((E1000_IVAR_INT_ALLOC_VALID | vector) << 16); + if (rx_ring->itr_val) + writel(1000000000 / (rx_ring->itr_val * 256), + hw->hw_addr + E1000_EITR_82574(vector)); + else + writel(1, hw->hw_addr + E1000_EITR_82574(vector)); + + /* Cause Tx interrupts on every write back */ + ivar |= (1 << 31); + + ew32(IVAR, ivar); + + /* enable MSI-X PBA support */ + ctrl_ext = er32(CTRL_EXT); + ctrl_ext |= E1000_CTRL_EXT_PBA_CLR; + + /* Auto-Mask Other interrupts upon ICR read */ +#define E1000_EIAC_MASK_82574 0x01F00000 + ew32(IAM, ~E1000_EIAC_MASK_82574 | E1000_IMS_OTHER); + ctrl_ext |= E1000_CTRL_EXT_EIAME; + ew32(CTRL_EXT, ctrl_ext); + e1e_flush(); +} + +void e1000e_reset_interrupt_capability(struct e1000_adapter *adapter) +{ + if (adapter->msix_entries) { + pci_disable_msix(adapter->pdev); + kfree(adapter->msix_entries); + adapter->msix_entries = NULL; + } else if (adapter->flags & FLAG_MSI_ENABLED) { + pci_disable_msi(adapter->pdev); + adapter->flags &= ~FLAG_MSI_ENABLED; + } + + return; +} + +/** + * e1000e_set_interrupt_capability - set MSI or MSI-X if supported + * + * Attempt to configure interrupts using the best available + * capabilities of the hardware and kernel. + **/ +void e1000e_set_interrupt_capability(struct e1000_adapter *adapter) +{ + int err; + int numvecs, i; + + + switch (adapter->int_mode) { + case E1000E_INT_MODE_MSIX: + if (adapter->flags & FLAG_HAS_MSIX) { + numvecs = 3; /* RxQ0, TxQ0 and other */ + adapter->msix_entries = kcalloc(numvecs, + sizeof(struct msix_entry), + GFP_KERNEL); + if (adapter->msix_entries) { + for (i = 0; i < numvecs; i++) + adapter->msix_entries[i].entry = i; + + err = pci_enable_msix(adapter->pdev, + adapter->msix_entries, + numvecs); + if (err == 0) + return; + } + /* MSI-X failed, so fall through and try MSI */ + e_err("Failed to initialize MSI-X interrupts. " + "Falling back to MSI interrupts.\n"); + e1000e_reset_interrupt_capability(adapter); + } + adapter->int_mode = E1000E_INT_MODE_MSI; + /* Fall through */ + case E1000E_INT_MODE_MSI: + if (!pci_enable_msi(adapter->pdev)) { + adapter->flags |= FLAG_MSI_ENABLED; + } else { + adapter->int_mode = E1000E_INT_MODE_LEGACY; + e_err("Failed to initialize MSI interrupts. Falling " + "back to legacy interrupts.\n"); + } + /* Fall through */ + case E1000E_INT_MODE_LEGACY: + /* Don't do anything; this is the system default */ + break; + } + + return; +} + +/** + * e1000_request_msix - Initialize MSI-X interrupts + * + * e1000_request_msix allocates MSI-X vectors and requests interrupts from the + * kernel. + **/ +static int e1000_request_msix(struct e1000_adapter *adapter) +{ + struct net_device *netdev = adapter->netdev; + int err = 0, vector = 0; + + if (strlen(netdev->name) < (IFNAMSIZ - 5)) + sprintf(adapter->rx_ring->name, "%s-rx0", netdev->name); + else + memcpy(adapter->rx_ring->name, netdev->name, IFNAMSIZ); + err = request_irq(adapter->msix_entries[vector].vector, + &e1000_intr_msix_rx, 0, adapter->rx_ring->name, + netdev); + if (err) + goto out; + adapter->rx_ring->itr_register = E1000_EITR_82574(vector); + adapter->rx_ring->itr_val = adapter->itr; + vector++; + + if (strlen(netdev->name) < (IFNAMSIZ - 5)) + sprintf(adapter->tx_ring->name, "%s-tx0", netdev->name); + else + memcpy(adapter->tx_ring->name, netdev->name, IFNAMSIZ); + err = request_irq(adapter->msix_entries[vector].vector, + &e1000_intr_msix_tx, 0, adapter->tx_ring->name, + netdev); + if (err) + goto out; + adapter->tx_ring->itr_register = E1000_EITR_82574(vector); + adapter->tx_ring->itr_val = adapter->itr; + vector++; + + err = request_irq(adapter->msix_entries[vector].vector, + &e1000_msix_other, 0, netdev->name, netdev); + if (err) + goto out; + + e1000_configure_msix(adapter); + return 0; +out: + return err; +} + /** * e1000_request_irq - initialize interrupts * @@ -1245,28 +1504,32 @@ static irqreturn_t e1000_intr(int irq, void *data) static int e1000_request_irq(struct e1000_adapter *adapter) { struct net_device *netdev = adapter->netdev; - int irq_flags = IRQF_SHARED; int err; - if (!(adapter->flags & FLAG_MSI_TEST_FAILED)) { - err = pci_enable_msi(adapter->pdev); - if (!err) { - adapter->flags |= FLAG_MSI_ENABLED; - irq_flags = 0; - } + if (adapter->msix_entries) { + err = e1000_request_msix(adapter); + if (!err) + return err; + /* fall back to MSI */ + e1000e_reset_interrupt_capability(adapter); + adapter->int_mode = E1000E_INT_MODE_MSI; + e1000e_set_interrupt_capability(adapter); + } + if (adapter->flags & FLAG_MSI_ENABLED) { + err = request_irq(adapter->pdev->irq, &e1000_intr_msi, 0, + netdev->name, netdev); + if (!err) + return err; + + /* fall back to legacy interrupt */ + e1000e_reset_interrupt_capability(adapter); + adapter->int_mode = E1000E_INT_MODE_LEGACY; } - err = request_irq(adapter->pdev->irq, - ((adapter->flags & FLAG_MSI_ENABLED) ? - &e1000_intr_msi : &e1000_intr), - irq_flags, netdev->name, netdev); - if (err) { - if (adapter->flags & FLAG_MSI_ENABLED) { - pci_disable_msi(adapter->pdev); - adapter->flags &= ~FLAG_MSI_ENABLED; - } + err = request_irq(adapter->pdev->irq, &e1000_intr, IRQF_SHARED, + netdev->name, netdev); + if (err) e_err("Unable to allocate interrupt, Error: %d\n", err); - } return err; } @@ -1275,11 +1538,21 @@ static void e1000_free_irq(struct e1000_adapter *adapter) { struct net_device *netdev = adapter->netdev; - free_irq(adapter->pdev->irq, netdev); - if (adapter->flags & FLAG_MSI_ENABLED) { - pci_disable_msi(adapter->pdev); - adapter->flags &= ~FLAG_MSI_ENABLED; + if (adapter->msix_entries) { + int vector = 0; + + free_irq(adapter->msix_entries[vector].vector, netdev); + vector++; + + free_irq(adapter->msix_entries[vector].vector, netdev); + vector++; + + /* Other Causes interrupt vector */ + free_irq(adapter->msix_entries[vector].vector, netdev); + return; } + + free_irq(adapter->pdev->irq, netdev); } /** @@ -1290,6 +1563,8 @@ static void e1000_irq_disable(struct e1000_adapter *adapter) struct e1000_hw *hw = &adapter->hw; ew32(IMC, ~0); + if (adapter->msix_entries) + ew32(EIAC_82574, 0); e1e_flush(); synchronize_irq(adapter->pdev->irq); } @@ -1301,7 +1576,12 @@ static void e1000_irq_enable(struct e1000_adapter *adapter) { struct e1000_hw *hw = &adapter->hw; - ew32(IMS, IMS_ENABLE_MASK); + if (adapter->msix_entries) { + ew32(EIAC_82574, adapter->eiac_mask & E1000_EIAC_MASK_82574); + ew32(IMS, adapter->eiac_mask | E1000_IMS_OTHER | E1000_IMS_LSC); + } else { + ew32(IMS, IMS_ENABLE_MASK); + } e1e_flush(); } @@ -1551,9 +1831,8 @@ void e1000e_free_rx_resources(struct e1000_adapter *adapter) * traffic pattern. Constants in this function were computed * based on theoretical maximum wire speed and thresholds were set based * on testing data as well as attempting to minimize response time - * while increasing bulk throughput. - * this functionality is controlled by the InterruptThrottleRate module - * parameter (see e1000_param.c) + * while increasing bulk throughput. This functionality is controlled + * by the InterruptThrottleRate module parameter. **/ static unsigned int e1000_update_itr(struct e1000_adapter *adapter, u16 itr_setting, int packets, @@ -1661,11 +1940,37 @@ set_itr_now: min(adapter->itr + (new_itr >> 2), new_itr) : new_itr; adapter->itr = new_itr; - ew32(ITR, 1000000000 / (new_itr * 256)); + adapter->rx_ring->itr_val = new_itr; + if (adapter->msix_entries) + adapter->rx_ring->set_itr = 1; + else + ew32(ITR, 1000000000 / (new_itr * 256)); } } /** + * e1000_alloc_queues - Allocate memory for all rings + * @adapter: board private structure to initialize + **/ +static int __devinit e1000_alloc_queues(struct e1000_adapter *adapter) +{ + adapter->tx_ring = kzalloc(sizeof(struct e1000_ring), GFP_KERNEL); + if (!adapter->tx_ring) + goto err; + + adapter->rx_ring = kzalloc(sizeof(struct e1000_ring), GFP_KERNEL); + if (!adapter->rx_ring) + goto err; + + return 0; +err: + e_err("Unable to allocate memory for queues\n"); + kfree(adapter->rx_ring); + kfree(adapter->tx_ring); + return -ENOMEM; +} + +/** * e1000_clean - NAPI Rx polling callback * @napi: struct associated with this polling callback * @budget: amount of packets driver is allowed to process this poll @@ -1673,12 +1978,17 @@ set_itr_now: static int e1000_clean(struct napi_struct *napi, int budget) { struct e1000_adapter *adapter = container_of(napi, struct e1000_adapter, napi); + struct e1000_hw *hw = &adapter->hw; struct net_device *poll_dev = adapter->netdev; int tx_cleaned = 0, work_done = 0; /* Must NOT use netdev_priv macro here. */ adapter = poll_dev->priv; + if (adapter->msix_entries && + !(adapter->rx_ring->ims_val & adapter->tx_ring->ims_val)) + goto clean_rx; + /* * e1000_clean is called per-cpu. This lock protects * tx_ring from being cleaned by multiple cpus @@ -1690,6 +2000,7 @@ static int e1000_clean(struct napi_struct *napi, int budget) spin_unlock(&adapter->tx_queue_lock); } +clean_rx: adapter->clean_rx(adapter, &work_done, budget); if (tx_cleaned) @@ -1700,7 +2011,10 @@ static int e1000_clean(struct napi_struct *napi, int budget) if (adapter->itr_setting & 3) e1000_set_itr(adapter); netif_rx_complete(poll_dev, napi); - e1000_irq_enable(adapter); + if (adapter->msix_entries) + ew32(IMS, adapter->rx_ring->ims_val); + else + e1000_irq_enable(adapter); } return work_done; @@ -2496,6 +2810,8 @@ int e1000e_up(struct e1000_adapter *adapter) clear_bit(__E1000_DOWN, &adapter->state); napi_enable(&adapter->napi); + if (adapter->msix_entries) + e1000_configure_msix(adapter); e1000_irq_enable(adapter); /* fire a link change interrupt to start the watchdog */ @@ -2579,13 +2895,10 @@ static int __devinit e1000_sw_init(struct e1000_adapter *adapter) adapter->max_frame_size = netdev->mtu + ETH_HLEN + ETH_FCS_LEN; adapter->min_frame_size = ETH_ZLEN + ETH_FCS_LEN; - adapter->tx_ring = kzalloc(sizeof(struct e1000_ring), GFP_KERNEL); - if (!adapter->tx_ring) - goto err; + e1000e_set_interrupt_capability(adapter); - adapter->rx_ring = kzalloc(sizeof(struct e1000_ring), GFP_KERNEL); - if (!adapter->rx_ring) - goto err; + if (e1000_alloc_queues(adapter)) + return -ENOMEM; spin_lock_init(&adapter->tx_queue_lock); @@ -2596,12 +2909,6 @@ static int __devinit e1000_sw_init(struct e1000_adapter *adapter) set_bit(__E1000_DOWN, &adapter->state); return 0; - -err: - e_err("Unable to allocate memory for queues\n"); - kfree(adapter->rx_ring); - kfree(adapter->tx_ring); - return -ENOMEM; } /** @@ -2643,6 +2950,7 @@ static int e1000_test_msi_interrupt(struct e1000_adapter *adapter) /* free the real vector and request a test handler */ e1000_free_irq(adapter); + e1000e_reset_interrupt_capability(adapter); /* Assume that the test fails, if it succeeds then the test * MSI irq handler will unset this flag */ @@ -2673,6 +2981,7 @@ static int e1000_test_msi_interrupt(struct e1000_adapter *adapter) rmb(); if (adapter->flags & FLAG_MSI_TEST_FAILED) { + adapter->int_mode = E1000E_INT_MODE_LEGACY; err = -EIO; e_info("MSI interrupt test failed!\n"); } @@ -2686,7 +2995,7 @@ static int e1000_test_msi_interrupt(struct e1000_adapter *adapter) /* okay so the test worked, restore settings */ e_dbg("%s: MSI interrupt test succeeded!\n", netdev->name); msi_test_failed: - /* restore the original vector, even if it failed */ + e1000e_set_interrupt_capability(adapter); e1000_request_irq(adapter); return err; } @@ -2796,7 +3105,7 @@ static int e1000_open(struct net_device *netdev) * ignore e1000e MSI messages, which means we need to test our MSI * interrupt now */ - { + if (adapter->int_mode != E1000E_INT_MODE_LEGACY) { err = e1000_test_msi(adapter); if (err) { e_err("Interrupt allocation failed\n"); @@ -2988,7 +3297,8 @@ void e1000e_update_stats(struct e1000_adapter *adapter) adapter->stats.algnerrc += er32(ALGNERRC); adapter->stats.rxerrc += er32(RXERRC); - adapter->stats.tncrs += er32(TNCRS); + if (hw->mac.type != e1000_82574) + adapter->stats.tncrs += er32(TNCRS); adapter->stats.cexterr += er32(CEXTERR); adapter->stats.tsctc += er32(TSCTC); adapter->stats.tsctfc += er32(TSCTFC); @@ -3201,6 +3511,27 @@ static void e1000_watchdog_task(struct work_struct *work) &adapter->link_duplex); e1000_print_link_info(adapter); /* + * On supported PHYs, check for duplex mismatch only + * if link has autonegotiated at 10/100 half + */ + if ((hw->phy.type == e1000_phy_igp_3 || + hw->phy.type == e1000_phy_bm) && + (hw->mac.autoneg == true) && + (adapter->link_speed == SPEED_10 || + adapter->link_speed == SPEED_100) && + (adapter->link_duplex == HALF_DUPLEX)) { + u16 autoneg_exp; + + e1e_rphy(hw, PHY_AUTONEG_EXP, &autoneg_exp); + + if (!(autoneg_exp & NWAY_ER_LP_NWAY_CAPS)) + e_info("Autonegotiated half duplex but" + " link partner cannot autoneg. " + " Try forcing full duplex if " + "link gets many collisions.\n"); + } + + /* * tweak tx_queue_len according to speed/duplex * and adjust the timeout factor */ @@ -3315,7 +3646,10 @@ link_up: } /* Cause software interrupt to ensure Rx ring is cleaned */ - ew32(ICS, E1000_ICS_RXDMT0); + if (adapter->msix_entries) + ew32(ICS, adapter->rx_ring->ims_val); + else + ew32(ICS, E1000_ICS_RXDMT0); /* Force detection of hung controller every watchdog period */ adapter->detect_tx_hung = 1; @@ -4032,6 +4366,7 @@ static int e1000_suspend(struct pci_dev *pdev, pm_message_t state) e1000e_down(adapter); e1000_free_irq(adapter); } + e1000e_reset_interrupt_capability(adapter); retval = pci_save_state(pdev); if (retval) @@ -4158,6 +4493,7 @@ static int e1000_resume(struct pci_dev *pdev) pci_enable_wake(pdev, PCI_D3hot, 0); pci_enable_wake(pdev, PCI_D3cold, 0); + e1000e_set_interrupt_capability(adapter); if (netif_running(netdev)) { err = e1000_request_irq(adapter); if (err) @@ -4467,6 +4803,8 @@ static int __devinit e1000_probe(struct pci_dev *pdev, adapter->bd_number = cards_found++; + e1000e_check_options(adapter); + /* setup adapter struct */ err = e1000_sw_init(adapter); if (err) @@ -4573,8 +4911,6 @@ static int __devinit e1000_probe(struct pci_dev *pdev, INIT_WORK(&adapter->reset_task, e1000_reset_task); INIT_WORK(&adapter->watchdog_task, e1000_watchdog_task); - e1000e_check_options(adapter); - /* Initialize link parameters. User can change them with ethtool */ adapter->hw.mac.autoneg = 1; adapter->fc_autoneg = 1; @@ -4704,6 +5040,7 @@ static void __devexit e1000_remove(struct pci_dev *pdev) if (!e1000_check_reset_block(&adapter->hw)) e1000_phy_hw_reset(&adapter->hw); + e1000e_reset_interrupt_capability(adapter); kfree(adapter->tx_ring); kfree(adapter->rx_ring); @@ -4745,6 +5082,8 @@ static struct pci_device_id e1000_pci_tbl[] = { { PCI_VDEVICE(INTEL, E1000_DEV_ID_82573E_IAMT), board_82573 }, { PCI_VDEVICE(INTEL, E1000_DEV_ID_82573L), board_82573 }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_82574L), board_82574 }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_80003ES2LAN_COPPER_DPT), board_80003es2lan }, { PCI_VDEVICE(INTEL, E1000_DEV_ID_80003ES2LAN_COPPER_SPT), @@ -4767,6 +5106,7 @@ static struct pci_device_id e1000_pci_tbl[] = { { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IFE_GT), board_ich9lan }, { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IGP_AMT), board_ich9lan }, { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IGP_C), board_ich9lan }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_BM), board_ich9lan }, { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IGP_M), board_ich9lan }, { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IGP_M_AMT), board_ich9lan }, { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IGP_M_V), board_ich9lan }, @@ -4775,6 +5115,9 @@ static struct pci_device_id e1000_pci_tbl[] = { { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH10_R_BM_LF), board_ich9lan }, { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH10_R_BM_V), board_ich9lan }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH10_D_BM_LM), board_ich10lan }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH10_D_BM_LF), board_ich10lan }, + { } /* terminate list */ }; MODULE_DEVICE_TABLE(pci, e1000_pci_tbl); diff --git a/drivers/net/e1000e/param.c b/drivers/net/e1000e/param.c index ed912e023a7..f46db6cda48 100644 --- a/drivers/net/e1000e/param.c +++ b/drivers/net/e1000e/param.c @@ -114,6 +114,15 @@ E1000_PARAM(InterruptThrottleRate, "Interrupt Throttling Rate"); #define DEFAULT_ITR 3 #define MAX_ITR 100000 #define MIN_ITR 100 +/* IntMode (Interrupt Mode) + * + * Valid Range: 0 - 2 + * + * Default Value: 2 (MSI-X) + */ +E1000_PARAM(IntMode, "Interrupt Mode"); +#define MAX_INTMODE 2 +#define MIN_INTMODE 0 /* * Enable Smart Power Down of the PHY @@ -352,6 +361,24 @@ void __devinit e1000e_check_options(struct e1000_adapter *adapter) adapter->itr = 20000; } } + { /* Interrupt Mode */ + struct e1000_option opt = { + .type = range_option, + .name = "Interrupt Mode", + .err = "defaulting to 2 (MSI-X)", + .def = E1000E_INT_MODE_MSIX, + .arg = { .r = { .min = MIN_INTMODE, + .max = MAX_INTMODE } } + }; + + if (num_IntMode > bd) { + unsigned int int_mode = IntMode[bd]; + e1000_validate_option(&int_mode, &opt, adapter); + adapter->int_mode = int_mode; + } else { + adapter->int_mode = opt.def; + } + } { /* Smart Power Down */ const struct e1000_option opt = { .type = enable_option, diff --git a/drivers/net/e1000e/phy.c b/drivers/net/e1000e/phy.c index b133dcf0e95..6cd333ae61d 100644 --- a/drivers/net/e1000e/phy.c +++ b/drivers/net/e1000e/phy.c @@ -476,7 +476,9 @@ s32 e1000e_copper_link_setup_m88(struct e1000_hw *hw) if (ret_val) return ret_val; - if ((phy->type == e1000_phy_m88) && (phy->revision < 4)) { + if ((phy->type == e1000_phy_m88) && + (phy->revision < E1000_REVISION_4) && + (phy->id != BME1000_E_PHY_ID_R2)) { /* * Force TX_CLK in the Extended PHY Specific Control Register * to 25MHz clock. @@ -504,6 +506,18 @@ s32 e1000e_copper_link_setup_m88(struct e1000_hw *hw) return ret_val; } + if ((phy->type == e1000_phy_bm) && (phy->id == BME1000_E_PHY_ID_R2)) { + /* Set PHY page 0, register 29 to 0x0003 */ + ret_val = e1e_wphy(hw, 29, 0x0003); + if (ret_val) + return ret_val; + + /* Set PHY page 0, register 30 to 0x0000 */ + ret_val = e1e_wphy(hw, 30, 0x0000); + if (ret_val) + return ret_val; + } + /* Commit the changes. */ ret_val = e1000e_commit_phy(hw); if (ret_val) @@ -1720,6 +1734,91 @@ s32 e1000e_get_cfg_done(struct e1000_hw *hw) return 0; } +/** + * e1000e_phy_init_script_igp3 - Inits the IGP3 PHY + * @hw: pointer to the HW structure + * + * Initializes a Intel Gigabit PHY3 when an EEPROM is not present. + **/ +s32 e1000e_phy_init_script_igp3(struct e1000_hw *hw) +{ + hw_dbg(hw, "Running IGP 3 PHY init script\n"); + + /* PHY init IGP 3 */ + /* Enable rise/fall, 10-mode work in class-A */ + e1e_wphy(hw, 0x2F5B, 0x9018); + /* Remove all caps from Replica path filter */ + e1e_wphy(hw, 0x2F52, 0x0000); + /* Bias trimming for ADC, AFE and Driver (Default) */ + e1e_wphy(hw, 0x2FB1, 0x8B24); + /* Increase Hybrid poly bias */ + e1e_wphy(hw, 0x2FB2, 0xF8F0); + /* Add 4% to Tx amplitude in Gig mode */ + e1e_wphy(hw, 0x2010, 0x10B0); + /* Disable trimming (TTT) */ + e1e_wphy(hw, 0x2011, 0x0000); + /* Poly DC correction to 94.6% + 2% for all channels */ + e1e_wphy(hw, 0x20DD, 0x249A); + /* ABS DC correction to 95.9% */ + e1e_wphy(hw, 0x20DE, 0x00D3); + /* BG temp curve trim */ + e1e_wphy(hw, 0x28B4, 0x04CE); + /* Increasing ADC OPAMP stage 1 currents to max */ + e1e_wphy(hw, 0x2F70, 0x29E4); + /* Force 1000 ( required for enabling PHY regs configuration) */ + e1e_wphy(hw, 0x0000, 0x0140); + /* Set upd_freq to 6 */ + e1e_wphy(hw, 0x1F30, 0x1606); + /* Disable NPDFE */ + e1e_wphy(hw, 0x1F31, 0xB814); + /* Disable adaptive fixed FFE (Default) */ + e1e_wphy(hw, 0x1F35, 0x002A); + /* Enable FFE hysteresis */ + e1e_wphy(hw, 0x1F3E, 0x0067); + /* Fixed FFE for short cable lengths */ + e1e_wphy(hw, 0x1F54, 0x0065); + /* Fixed FFE for medium cable lengths */ + e1e_wphy(hw, 0x1F55, 0x002A); + /* Fixed FFE for long cable lengths */ + e1e_wphy(hw, 0x1F56, 0x002A); + /* Enable Adaptive Clip Threshold */ + e1e_wphy(hw, 0x1F72, 0x3FB0); + /* AHT reset limit to 1 */ + e1e_wphy(hw, 0x1F76, 0xC0FF); + /* Set AHT master delay to 127 msec */ + e1e_wphy(hw, 0x1F77, 0x1DEC); + /* Set scan bits for AHT */ + e1e_wphy(hw, 0x1F78, 0xF9EF); + /* Set AHT Preset bits */ + e1e_wphy(hw, 0x1F79, 0x0210); + /* Change integ_factor of channel A to 3 */ + e1e_wphy(hw, 0x1895, 0x0003); + /* Change prop_factor of channels BCD to 8 */ + e1e_wphy(hw, 0x1796, 0x0008); + /* Change cg_icount + enable integbp for channels BCD */ + e1e_wphy(hw, 0x1798, 0xD008); + /* + * Change cg_icount + enable integbp + change prop_factor_master + * to 8 for channel A + */ + e1e_wphy(hw, 0x1898, 0xD918); + /* Disable AHT in Slave mode on channel A */ + e1e_wphy(hw, 0x187A, 0x0800); + /* + * Enable LPLU and disable AN to 1000 in non-D0a states, + * Enable SPD+B2B + */ + e1e_wphy(hw, 0x0019, 0x008D); + /* Enable restart AN on an1000_dis change */ + e1e_wphy(hw, 0x001B, 0x2080); + /* Enable wh_fifo read clock in 10/100 modes */ + e1e_wphy(hw, 0x0014, 0x0045); + /* Restart AN, Speed selection is 1000 */ + e1e_wphy(hw, 0x0000, 0x1340); + + return 0; +} + /* Internal function pointers */ /** @@ -1969,6 +2068,99 @@ out: } /** + * e1000e_read_phy_reg_bm2 - Read BM PHY register + * @hw: pointer to the HW structure + * @offset: register offset to be read + * @data: pointer to the read data + * + * Acquires semaphore, if necessary, then reads the PHY register at offset + * and storing the retrieved information in data. Release any acquired + * semaphores before exiting. + **/ +s32 e1000e_read_phy_reg_bm2(struct e1000_hw *hw, u32 offset, u16 *data) +{ + s32 ret_val; + u16 page = (u16)(offset >> IGP_PAGE_SHIFT); + + /* Page 800 works differently than the rest so it has its own func */ + if (page == BM_WUC_PAGE) { + ret_val = e1000_access_phy_wakeup_reg_bm(hw, offset, data, + true); + return ret_val; + } + + ret_val = hw->phy.ops.acquire_phy(hw); + if (ret_val) + return ret_val; + + hw->phy.addr = 1; + + if (offset > MAX_PHY_MULTI_PAGE_REG) { + + /* Page is shifted left, PHY expects (page x 32) */ + ret_val = e1000e_write_phy_reg_mdic(hw, BM_PHY_PAGE_SELECT, + page); + + if (ret_val) { + hw->phy.ops.release_phy(hw); + return ret_val; + } + } + + ret_val = e1000e_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset, + data); + hw->phy.ops.release_phy(hw); + + return ret_val; +} + +/** + * e1000e_write_phy_reg_bm2 - Write BM PHY register + * @hw: pointer to the HW structure + * @offset: register offset to write to + * @data: data to write at register offset + * + * Acquires semaphore, if necessary, then writes the data to PHY register + * at the offset. Release any acquired semaphores before exiting. + **/ +s32 e1000e_write_phy_reg_bm2(struct e1000_hw *hw, u32 offset, u16 data) +{ + s32 ret_val; + u16 page = (u16)(offset >> IGP_PAGE_SHIFT); + + /* Page 800 works differently than the rest so it has its own func */ + if (page == BM_WUC_PAGE) { + ret_val = e1000_access_phy_wakeup_reg_bm(hw, offset, &data, + false); + return ret_val; + } + + ret_val = hw->phy.ops.acquire_phy(hw); + if (ret_val) + return ret_val; + + hw->phy.addr = 1; + + if (offset > MAX_PHY_MULTI_PAGE_REG) { + /* Page is shifted left, PHY expects (page x 32) */ + ret_val = e1000e_write_phy_reg_mdic(hw, BM_PHY_PAGE_SELECT, + page); + + if (ret_val) { + hw->phy.ops.release_phy(hw); + return ret_val; + } + } + + ret_val = e1000e_write_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset, + data); + + hw->phy.ops.release_phy(hw); + + return ret_val; +} + +/** * e1000_access_phy_wakeup_reg_bm - Read BM PHY wakeup register * @hw: pointer to the HW structure * @offset: register offset to be read or written diff --git a/drivers/net/ibm_newemac/mal.h b/drivers/net/ibm_newemac/mal.h index eaa7262dc07..717dc38b685 100644 --- a/drivers/net/ibm_newemac/mal.h +++ b/drivers/net/ibm_newemac/mal.h @@ -102,7 +102,7 @@ /* MAL V1 IER bits */ #define MAL1_IER_NWE 0x00000008 #define MAL1_IER_SOC_EVENTS MAL1_IER_NWE -#define MAL1_IER_EVENTS (MAL1_IER_SOC_EVENTS | MAL_IER_OTE | \ +#define MAL1_IER_EVENTS (MAL1_IER_SOC_EVENTS | MAL_IER_DE | \ MAL_IER_OTE | MAL_IER_OE | MAL_IER_PE) /* MAL V2 IER bits */ @@ -110,7 +110,7 @@ #define MAL2_IER_PRE 0x00000040 #define MAL2_IER_PWE 0x00000020 #define MAL2_IER_SOC_EVENTS (MAL2_IER_PT | MAL2_IER_PRE | MAL2_IER_PWE) -#define MAL2_IER_EVENTS (MAL2_IER_SOC_EVENTS | MAL_IER_OTE | \ +#define MAL2_IER_EVENTS (MAL2_IER_SOC_EVENTS | MAL_IER_DE | \ MAL_IER_OTE | MAL_IER_OE | MAL_IER_PE) diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c index 634c4c9d87b..93d02efa9a0 100644 --- a/drivers/net/igb/igb_main.c +++ b/drivers/net/igb/igb_main.c @@ -3563,10 +3563,6 @@ static int igb_clean_rx_ring_msix(struct napi_struct *napi, int budget) struct net_device *netdev = adapter->netdev; int work_done = 0; - /* Keep link state information with original netdev */ - if (!netif_carrier_ok(netdev)) - goto quit_polling; - #ifdef CONFIG_DCA if (adapter->flags & IGB_FLAG_DCA_ENABLED) igb_update_rx_dca(rx_ring); @@ -3576,7 +3572,6 @@ static int igb_clean_rx_ring_msix(struct napi_struct *napi, int budget) /* If not enough Rx work done, exit the polling mode */ if ((work_done == 0) || !netif_running(netdev)) { -quit_polling: netif_rx_complete(netdev, napi); if (adapter->itr_setting & 3) { @@ -3617,16 +3612,14 @@ static bool igb_clean_tx_irq(struct igb_ring *tx_ring) unsigned int i; u32 head, oldhead; unsigned int count = 0; - bool cleaned = false; - bool retval = true; unsigned int total_bytes = 0, total_packets = 0; + bool retval = true; rmb(); head = get_head(tx_ring); i = tx_ring->next_to_clean; while (1) { while (i != head) { - cleaned = true; tx_desc = E1000_TX_DESC(*tx_ring, i); buffer_info = &tx_ring->buffer_info[i]; skb = buffer_info->skb; @@ -3643,7 +3636,6 @@ static bool igb_clean_tx_irq(struct igb_ring *tx_ring) } igb_unmap_and_free_tx_resource(adapter, buffer_info); - tx_desc->upper.data = 0; i++; if (i == tx_ring->count) @@ -3665,7 +3657,7 @@ static bool igb_clean_tx_irq(struct igb_ring *tx_ring) done_cleaning: tx_ring->next_to_clean = i; - if (unlikely(cleaned && + if (unlikely(count && netif_carrier_ok(netdev) && IGB_DESC_UNUSED(tx_ring) >= IGB_TX_QUEUE_WAKE)) { /* Make sure that anybody stopping the queue after this diff --git a/drivers/net/ixgbe/ixgbe.h b/drivers/net/ixgbe/ixgbe.h index 956914a5028..90b53830196 100644 --- a/drivers/net/ixgbe/ixgbe.h +++ b/drivers/net/ixgbe/ixgbe.h @@ -37,7 +37,7 @@ #include "ixgbe_type.h" #include "ixgbe_common.h" -#ifdef CONFIG_DCA +#if defined(CONFIG_DCA) || defined(CONFIG_DCA_MODULE) #include <linux/dca.h> #endif @@ -69,12 +69,12 @@ /* flow control */ #define IXGBE_DEFAULT_FCRTL 0x10000 -#define IXGBE_MIN_FCRTL 0 +#define IXGBE_MIN_FCRTL 0x40 #define IXGBE_MAX_FCRTL 0x7FF80 #define IXGBE_DEFAULT_FCRTH 0x20000 -#define IXGBE_MIN_FCRTH 0 +#define IXGBE_MIN_FCRTH 0x600 #define IXGBE_MAX_FCRTH 0x7FFF0 -#define IXGBE_DEFAULT_FCPAUSE 0x6800 /* may be too long */ +#define IXGBE_DEFAULT_FCPAUSE 0xFFFF #define IXGBE_MIN_FCPAUSE 0 #define IXGBE_MAX_FCPAUSE 0xFFFF @@ -150,7 +150,7 @@ struct ixgbe_ring { * offset associated with this ring, which is different * for DCE and RSS modes */ -#ifdef CONFIG_DCA +#if defined(CONFIG_DCA) || defined(CONFIG_DCA_MODULE) /* cpu for tx queue */ int cpu; #endif @@ -166,6 +166,7 @@ struct ixgbe_ring { char name[IFNAMSIZ + 5]; u16 work_limit; /* max work per interrupt */ + u16 rx_buf_len; }; #define RING_F_VMDQ 1 @@ -228,7 +229,6 @@ struct ixgbe_adapter { struct timer_list watchdog_timer; struct vlan_group *vlgrp; u16 bd_number; - u16 rx_buf_len; struct work_struct reset_task; struct ixgbe_q_vector q_vector[MAX_MSIX_Q_VECTORS]; char name[MAX_MSIX_COUNT][IFNAMSIZ + 5]; @@ -267,15 +267,28 @@ struct ixgbe_adapter { * thus the additional *_CAPABLE flags. */ u32 flags; -#define IXGBE_FLAG_RX_CSUM_ENABLED (u32)(1 << 0) -#define IXGBE_FLAG_MSI_ENABLED (u32)(1 << 1) -#define IXGBE_FLAG_MSIX_ENABLED (u32)(1 << 2) -#define IXGBE_FLAG_RX_PS_ENABLED (u32)(1 << 3) -#define IXGBE_FLAG_IN_NETPOLL (u32)(1 << 4) -#define IXGBE_FLAG_IMIR_ENABLED (u32)(1 << 5) -#define IXGBE_FLAG_RSS_ENABLED (u32)(1 << 6) -#define IXGBE_FLAG_VMDQ_ENABLED (u32)(1 << 7) -#define IXGBE_FLAG_DCA_ENABLED (u32)(1 << 8) +#define IXGBE_FLAG_RX_CSUM_ENABLED (u32)(1) +#define IXGBE_FLAG_MSI_CAPABLE (u32)(1 << 1) +#define IXGBE_FLAG_MSI_ENABLED (u32)(1 << 2) +#define IXGBE_FLAG_MSIX_CAPABLE (u32)(1 << 3) +#define IXGBE_FLAG_MSIX_ENABLED (u32)(1 << 4) +#define IXGBE_FLAG_RX_1BUF_CAPABLE (u32)(1 << 6) +#define IXGBE_FLAG_RX_PS_CAPABLE (u32)(1 << 7) +#define IXGBE_FLAG_RX_PS_ENABLED (u32)(1 << 8) +#define IXGBE_FLAG_IN_NETPOLL (u32)(1 << 9) +#define IXGBE_FLAG_DCA_ENABLED (u32)(1 << 10) +#define IXGBE_FLAG_DCA_CAPABLE (u32)(1 << 11) +#define IXGBE_FLAG_IMIR_ENABLED (u32)(1 << 12) +#define IXGBE_FLAG_MQ_CAPABLE (u32)(1 << 13) +#define IXGBE_FLAG_RSS_ENABLED (u32)(1 << 16) +#define IXGBE_FLAG_RSS_CAPABLE (u32)(1 << 17) +#define IXGBE_FLAG_VMDQ_CAPABLE (u32)(1 << 18) +#define IXGBE_FLAG_VMDQ_ENABLED (u32)(1 << 19) +#define IXGBE_FLAG_NEED_LINK_UPDATE (u32)(1 << 22) +#define IXGBE_FLAG_IN_WATCHDOG_TASK (u32)(1 << 23) + +/* default to trying for four seconds */ +#define IXGBE_TRY_LINK_TIMEOUT (4 * HZ) /* OS defined structs */ struct net_device *netdev; diff --git a/drivers/net/ixgbe/ixgbe_82598.c b/drivers/net/ixgbe/ixgbe_82598.c index f96358b641a..ba09063260d 100644 --- a/drivers/net/ixgbe/ixgbe_82598.c +++ b/drivers/net/ixgbe/ixgbe_82598.c @@ -36,6 +36,8 @@ #define IXGBE_82598_MAX_TX_QUEUES 32 #define IXGBE_82598_MAX_RX_QUEUES 64 #define IXGBE_82598_RAR_ENTRIES 16 +#define IXGBE_82598_MC_TBL_SIZE 128 +#define IXGBE_82598_VFT_TBL_SIZE 128 static s32 ixgbe_get_invariants_82598(struct ixgbe_hw *hw); static s32 ixgbe_get_link_settings_82598(struct ixgbe_hw *hw, u32 *speed, @@ -60,7 +62,9 @@ static s32 ixgbe_get_invariants_82598(struct ixgbe_hw *hw) { hw->mac.num_rx_queues = IXGBE_82598_MAX_RX_QUEUES; hw->mac.num_tx_queues = IXGBE_82598_MAX_TX_QUEUES; - hw->mac.num_rx_addrs = IXGBE_82598_RAR_ENTRIES; + hw->mac.mcft_size = IXGBE_82598_MC_TBL_SIZE; + hw->mac.vft_size = IXGBE_82598_VFT_TBL_SIZE; + hw->mac.num_rar_entries = IXGBE_82598_RAR_ENTRIES; /* PHY ops are filled in by default properly for Fiber only */ if (hw->mac.ops.get_media_type(hw) == ixgbe_media_type_copper) { diff --git a/drivers/net/ixgbe/ixgbe_common.c b/drivers/net/ixgbe/ixgbe_common.c index 7fd6aeb1b02..9c0d0a1964e 100644 --- a/drivers/net/ixgbe/ixgbe_common.c +++ b/drivers/net/ixgbe/ixgbe_common.c @@ -661,7 +661,7 @@ s32 ixgbe_set_rar(struct ixgbe_hw *hw, u32 index, u8 *addr, u32 vind, static s32 ixgbe_init_rx_addrs(struct ixgbe_hw *hw) { u32 i; - u32 rar_entries = hw->mac.num_rx_addrs; + u32 rar_entries = hw->mac.num_rar_entries; /* * If the current mac address is valid, assume it is a software override @@ -705,13 +705,114 @@ static s32 ixgbe_init_rx_addrs(struct ixgbe_hw *hw) IXGBE_WRITE_REG(hw, IXGBE_MCSTCTRL, hw->mac.mc_filter_type); hw_dbg(hw, " Clearing MTA\n"); - for (i = 0; i < IXGBE_MC_TBL_SIZE; i++) + for (i = 0; i < hw->mac.mcft_size; i++) IXGBE_WRITE_REG(hw, IXGBE_MTA(i), 0); return 0; } /** + * ixgbe_add_uc_addr - Adds a secondary unicast address. + * @hw: pointer to hardware structure + * @addr: new address + * + * Adds it to unused receive address register or goes into promiscuous mode. + **/ +void ixgbe_add_uc_addr(struct ixgbe_hw *hw, u8 *addr) +{ + u32 rar_entries = hw->mac.num_rar_entries; + u32 rar; + + hw_dbg(hw, " UC Addr = %.2X %.2X %.2X %.2X %.2X %.2X\n", + addr[0], addr[1], addr[2], addr[3], addr[4], addr[5]); + + /* + * Place this address in the RAR if there is room, + * else put the controller into promiscuous mode + */ + if (hw->addr_ctrl.rar_used_count < rar_entries) { + rar = hw->addr_ctrl.rar_used_count - + hw->addr_ctrl.mc_addr_in_rar_count; + ixgbe_set_rar(hw, rar, addr, 0, IXGBE_RAH_AV); + hw_dbg(hw, "Added a secondary address to RAR[%d]\n", rar); + hw->addr_ctrl.rar_used_count++; + } else { + hw->addr_ctrl.overflow_promisc++; + } + + hw_dbg(hw, "ixgbe_add_uc_addr Complete\n"); +} + +/** + * ixgbe_update_uc_addr_list - Updates MAC list of secondary addresses + * @hw: pointer to hardware structure + * @addr_list: the list of new addresses + * @addr_count: number of addresses + * @next: iterator function to walk the address list + * + * The given list replaces any existing list. Clears the secondary addrs from + * receive address registers. Uses unused receive address registers for the + * first secondary addresses, and falls back to promiscuous mode as needed. + * + * Drivers using secondary unicast addresses must set user_set_promisc when + * manually putting the device into promiscuous mode. + **/ +s32 ixgbe_update_uc_addr_list(struct ixgbe_hw *hw, u8 *addr_list, + u32 addr_count, ixgbe_mc_addr_itr next) +{ + u8 *addr; + u32 i; + u32 old_promisc_setting = hw->addr_ctrl.overflow_promisc; + u32 uc_addr_in_use; + u32 fctrl; + u32 vmdq; + + /* + * Clear accounting of old secondary address list, + * don't count RAR[0] + */ + uc_addr_in_use = hw->addr_ctrl.rar_used_count - + hw->addr_ctrl.mc_addr_in_rar_count - 1; + hw->addr_ctrl.rar_used_count -= uc_addr_in_use; + hw->addr_ctrl.overflow_promisc = 0; + + /* Zero out the other receive addresses */ + hw_dbg(hw, "Clearing RAR[1-%d]\n", uc_addr_in_use); + for (i = 1; i <= uc_addr_in_use; i++) { + IXGBE_WRITE_REG(hw, IXGBE_RAL(i), 0); + IXGBE_WRITE_REG(hw, IXGBE_RAH(i), 0); + } + + /* Add the new addresses */ + for (i = 0; i < addr_count; i++) { + hw_dbg(hw, " Adding the secondary addresses:\n"); + addr = next(hw, &addr_list, &vmdq); + ixgbe_add_uc_addr(hw, addr); + } + + if (hw->addr_ctrl.overflow_promisc) { + /* enable promisc if not already in overflow or set by user */ + if (!old_promisc_setting && !hw->addr_ctrl.user_set_promisc) { + hw_dbg(hw, " Entering address overflow promisc mode\n"); + fctrl = IXGBE_READ_REG(hw, IXGBE_FCTRL); + fctrl |= IXGBE_FCTRL_UPE; + IXGBE_WRITE_REG(hw, IXGBE_FCTRL, fctrl); + } + } else { + /* only disable if set by overflow, not by user */ + if (old_promisc_setting && !hw->addr_ctrl.user_set_promisc) { + hw_dbg(hw, " Leaving address overflow promisc mode\n"); + fctrl = IXGBE_READ_REG(hw, IXGBE_FCTRL); + fctrl &= ~IXGBE_FCTRL_UPE; + IXGBE_WRITE_REG(hw, IXGBE_FCTRL, fctrl); + } + } + + hw_dbg(hw, "ixgbe_update_uc_addr_list Complete\n"); + return 0; +} + +/** * ixgbe_mta_vector - Determines bit-vector in multicast table to set * @hw: pointer to hardware structure * @mc_addr: the multicast address @@ -794,7 +895,7 @@ static void ixgbe_set_mta(struct ixgbe_hw *hw, u8 *mc_addr) **/ static void ixgbe_add_mc_addr(struct ixgbe_hw *hw, u8 *mc_addr) { - u32 rar_entries = hw->mac.num_rx_addrs; + u32 rar_entries = hw->mac.num_rar_entries; hw_dbg(hw, " MC Addr =%.2X %.2X %.2X %.2X %.2X %.2X\n", mc_addr[0], mc_addr[1], mc_addr[2], @@ -823,7 +924,7 @@ static void ixgbe_add_mc_addr(struct ixgbe_hw *hw, u8 *mc_addr) * @hw: pointer to hardware structure * @mc_addr_list: the list of new multicast addresses * @mc_addr_count: number of addresses - * @pad: number of bytes between addresses in the list + * @next: iterator function to walk the multicast address list * * The given list replaces any existing list. Clears the MC addrs from receive * address registers and the multicast table. Uses unsed receive address @@ -831,10 +932,11 @@ static void ixgbe_add_mc_addr(struct ixgbe_hw *hw, u8 *mc_addr) * multicast table. **/ s32 ixgbe_update_mc_addr_list(struct ixgbe_hw *hw, u8 *mc_addr_list, - u32 mc_addr_count, u32 pad) + u32 mc_addr_count, ixgbe_mc_addr_itr next) { u32 i; - u32 rar_entries = hw->mac.num_rx_addrs; + u32 rar_entries = hw->mac.num_rar_entries; + u32 vmdq; /* * Set the new number of MC addresses that we are being requested to @@ -854,14 +956,13 @@ s32 ixgbe_update_mc_addr_list(struct ixgbe_hw *hw, u8 *mc_addr_list, /* Clear the MTA */ hw_dbg(hw, " Clearing MTA\n"); - for (i = 0; i < IXGBE_MC_TBL_SIZE; i++) + for (i = 0; i < hw->mac.mcft_size; i++) IXGBE_WRITE_REG(hw, IXGBE_MTA(i), 0); /* Add the new addresses */ for (i = 0; i < mc_addr_count; i++) { hw_dbg(hw, " Adding the multicast addresses:\n"); - ixgbe_add_mc_addr(hw, mc_addr_list + - (i * (IXGBE_ETH_LENGTH_OF_ADDRESS + pad))); + ixgbe_add_mc_addr(hw, next(hw, &mc_addr_list, &vmdq)); } /* Enable mta */ @@ -884,11 +985,11 @@ static s32 ixgbe_clear_vfta(struct ixgbe_hw *hw) u32 offset; u32 vlanbyte; - for (offset = 0; offset < IXGBE_VLAN_FILTER_TBL_SIZE; offset++) + for (offset = 0; offset < hw->mac.vft_size; offset++) IXGBE_WRITE_REG(hw, IXGBE_VFTA(offset), 0); for (vlanbyte = 0; vlanbyte < 4; vlanbyte++) - for (offset = 0; offset < IXGBE_VLAN_FILTER_TBL_SIZE; offset++) + for (offset = 0; offset < hw->mac.vft_size; offset++) IXGBE_WRITE_REG(hw, IXGBE_VFTAVIND(vlanbyte, offset), 0); @@ -964,6 +1065,13 @@ s32 ixgbe_setup_fc(struct ixgbe_hw *hw, s32 packetbuf_num) rmcs_reg &= ~(IXGBE_RMCS_TFCE_PRIORITY | IXGBE_RMCS_TFCE_802_3X); /* + * 10 gig parts do not have a word in the EEPROM to determine the + * default flow control setting, so we explicitly set it to full. + */ + if (hw->fc.type == ixgbe_fc_default) + hw->fc.type = ixgbe_fc_full; + + /* * We want to save off the original Flow Control configuration just in * case we get disconnected and then reconnected into a different hub * or switch with different Flow Control capabilities. @@ -1016,6 +1124,16 @@ s32 ixgbe_setup_fc(struct ixgbe_hw *hw, s32 packetbuf_num) IXGBE_WRITE_REG(hw, IXGBE_RMCS, rmcs_reg); /* + * Check for invalid software configuration, zeros are completely + * invalid for all parameters used past this point, and if we enable + * flow control with zero water marks, we blast flow control packets. + */ + if (!hw->fc.low_water || !hw->fc.high_water || !hw->fc.pause_time) { + hw_dbg(hw, "Flow control structure initialized incorrectly\n"); + return IXGBE_ERR_INVALID_LINK_SETTINGS; + } + + /* * We need to set up the Receive Threshold high and low water * marks as well as (optionally) enabling the transmission of * XON frames. diff --git a/drivers/net/ixgbe/ixgbe_common.h b/drivers/net/ixgbe/ixgbe_common.h index de6ddd5d04a..c75ecba9ccd 100644 --- a/drivers/net/ixgbe/ixgbe_common.h +++ b/drivers/net/ixgbe/ixgbe_common.h @@ -47,7 +47,9 @@ s32 ixgbe_validate_eeprom_checksum(struct ixgbe_hw *hw, u16 *checksum_val); s32 ixgbe_set_rar(struct ixgbe_hw *hw, u32 index, u8 *addr, u32 vind, u32 enable_addr); s32 ixgbe_update_mc_addr_list(struct ixgbe_hw *hw, u8 *mc_addr_list, - u32 mc_addr_count, u32 pad); + u32 mc_addr_count, ixgbe_mc_addr_itr next); +s32 ixgbe_update_uc_addr_list(struct ixgbe_hw *hw, u8 *uc_addr_list, + u32 mc_addr_count, ixgbe_mc_addr_itr next); s32 ixgbe_set_vfta(struct ixgbe_hw *hw, u32 vlan, u32 vind, bool vlan_on); s32 ixgbe_validate_mac_addr(u8 *mac_addr); diff --git a/drivers/net/ixgbe/ixgbe_ethtool.c b/drivers/net/ixgbe/ixgbe_ethtool.c index 3efe5dda10a..61c000e2309 100644 --- a/drivers/net/ixgbe/ixgbe_ethtool.c +++ b/drivers/net/ixgbe/ixgbe_ethtool.c @@ -233,15 +233,15 @@ static int ixgbe_set_rx_csum(struct net_device *netdev, u32 data) static u32 ixgbe_get_tx_csum(struct net_device *netdev) { - return (netdev->features & NETIF_F_HW_CSUM) != 0; + return (netdev->features & NETIF_F_IP_CSUM) != 0; } static int ixgbe_set_tx_csum(struct net_device *netdev, u32 data) { if (data) - netdev->features |= NETIF_F_HW_CSUM; + netdev->features |= (NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM); else - netdev->features &= ~NETIF_F_HW_CSUM; + netdev->features &= ~NETIF_F_IP_CSUM; return 0; } diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c index a417be7f8be..362541aa946 100644 --- a/drivers/net/ixgbe/ixgbe_main.c +++ b/drivers/net/ixgbe/ixgbe_main.c @@ -80,7 +80,7 @@ static struct pci_device_id ixgbe_pci_tbl[] = { }; MODULE_DEVICE_TABLE(pci, ixgbe_pci_tbl); -#ifdef CONFIG_DCA +#if defined(CONFIG_DCA) || defined (CONFIG_DCA_MODULE) static int ixgbe_notify_dca(struct notifier_block *, unsigned long event, void *p); static struct notifier_block dca_notifier = { @@ -148,8 +148,7 @@ static void ixgbe_unmap_and_free_tx_resource(struct ixgbe_adapter *adapter, *tx_buffer_info) { if (tx_buffer_info->dma) { - pci_unmap_page(adapter->pdev, - tx_buffer_info->dma, + pci_unmap_page(adapter->pdev, tx_buffer_info->dma, tx_buffer_info->length, PCI_DMA_TODEVICE); tx_buffer_info->dma = 0; } @@ -162,32 +161,35 @@ static void ixgbe_unmap_and_free_tx_resource(struct ixgbe_adapter *adapter, static inline bool ixgbe_check_tx_hang(struct ixgbe_adapter *adapter, struct ixgbe_ring *tx_ring, - unsigned int eop, - union ixgbe_adv_tx_desc *eop_desc) + unsigned int eop) { + struct ixgbe_hw *hw = &adapter->hw; + u32 head, tail; + /* Detect a transmit hang in hardware, this serializes the - * check with the clearing of time_stamp and movement of i */ + * check with the clearing of time_stamp and movement of eop */ + head = IXGBE_READ_REG(hw, tx_ring->head); + tail = IXGBE_READ_REG(hw, tx_ring->tail); adapter->detect_tx_hung = false; - if (tx_ring->tx_buffer_info[eop].dma && + if ((head != tail) && + tx_ring->tx_buffer_info[eop].time_stamp && time_after(jiffies, tx_ring->tx_buffer_info[eop].time_stamp + HZ) && !(IXGBE_READ_REG(&adapter->hw, IXGBE_TFCS) & IXGBE_TFCS_TXOFF)) { /* detected Tx unit hang */ + union ixgbe_adv_tx_desc *tx_desc; + tx_desc = IXGBE_TX_DESC_ADV(*tx_ring, eop); DPRINTK(DRV, ERR, "Detected Tx Unit Hang\n" - " TDH <%x>\n" - " TDT <%x>\n" + " Tx Queue <%d>\n" + " TDH, TDT <%x>, <%x>\n" " next_to_use <%x>\n" " next_to_clean <%x>\n" "tx_buffer_info[next_to_clean]\n" " time_stamp <%lx>\n" - " next_to_watch <%x>\n" - " jiffies <%lx>\n" - " next_to_watch.status <%x>\n", - readl(adapter->hw.hw_addr + tx_ring->head), - readl(adapter->hw.hw_addr + tx_ring->tail), - tx_ring->next_to_use, - tx_ring->next_to_clean, - tx_ring->tx_buffer_info[eop].time_stamp, - eop, jiffies, eop_desc->wb.status); + " jiffies <%lx>\n", + tx_ring->queue_index, + head, tail, + tx_ring->next_to_use, eop, + tx_ring->tx_buffer_info[eop].time_stamp, jiffies); return true; } @@ -203,65 +205,75 @@ static inline bool ixgbe_check_tx_hang(struct ixgbe_adapter *adapter, #define DESC_NEEDED (TXD_USE_COUNT(IXGBE_MAX_DATA_PER_TXD) /* skb->data */ + \ MAX_SKB_FRAGS * TXD_USE_COUNT(PAGE_SIZE) + 1) /* for context */ +#define GET_TX_HEAD_FROM_RING(ring) (\ + *(volatile u32 *) \ + ((union ixgbe_adv_tx_desc *)(ring)->desc + (ring)->count)) +static void ixgbe_tx_timeout(struct net_device *netdev); + /** * ixgbe_clean_tx_irq - Reclaim resources after transmit completes * @adapter: board private structure + * @tx_ring: tx ring to clean **/ static bool ixgbe_clean_tx_irq(struct ixgbe_adapter *adapter, - struct ixgbe_ring *tx_ring) + struct ixgbe_ring *tx_ring) { - struct net_device *netdev = adapter->netdev; - union ixgbe_adv_tx_desc *tx_desc, *eop_desc; + union ixgbe_adv_tx_desc *tx_desc; struct ixgbe_tx_buffer *tx_buffer_info; - unsigned int i, eop; - bool cleaned = false; - unsigned int total_tx_bytes = 0, total_tx_packets = 0; + struct net_device *netdev = adapter->netdev; + struct sk_buff *skb; + unsigned int i; + u32 head, oldhead; + unsigned int count = 0; + unsigned int total_bytes = 0, total_packets = 0; + rmb(); + head = GET_TX_HEAD_FROM_RING(tx_ring); + head = le32_to_cpu(head); i = tx_ring->next_to_clean; - eop = tx_ring->tx_buffer_info[i].next_to_watch; - eop_desc = IXGBE_TX_DESC_ADV(*tx_ring, eop); - while (eop_desc->wb.status & cpu_to_le32(IXGBE_TXD_STAT_DD)) { - cleaned = false; - while (!cleaned) { + while (1) { + while (i != head) { tx_desc = IXGBE_TX_DESC_ADV(*tx_ring, i); tx_buffer_info = &tx_ring->tx_buffer_info[i]; - cleaned = (i == eop); + skb = tx_buffer_info->skb; - tx_ring->stats.bytes += tx_buffer_info->length; - if (cleaned) { - struct sk_buff *skb = tx_buffer_info->skb; + if (skb) { unsigned int segs, bytecount; + + /* gso_segs is currently only valid for tcp */ segs = skb_shinfo(skb)->gso_segs ?: 1; /* multiply data chunks by size of headers */ bytecount = ((segs - 1) * skb_headlen(skb)) + - skb->len; - total_tx_packets += segs; - total_tx_bytes += bytecount; + skb->len; + total_packets += segs; + total_bytes += bytecount; } + ixgbe_unmap_and_free_tx_resource(adapter, - tx_buffer_info); - tx_desc->wb.status = 0; + tx_buffer_info); i++; if (i == tx_ring->count) i = 0; - } - - tx_ring->stats.packets++; - - eop = tx_ring->tx_buffer_info[i].next_to_watch; - eop_desc = IXGBE_TX_DESC_ADV(*tx_ring, eop); - - /* weight of a sort for tx, avoid endless transmit cleanup */ - if (total_tx_packets >= tx_ring->work_limit) - break; - } + count++; + if (count == tx_ring->count) + goto done_cleaning; + } + oldhead = head; + rmb(); + head = GET_TX_HEAD_FROM_RING(tx_ring); + head = le32_to_cpu(head); + if (head == oldhead) + goto done_cleaning; + } /* while (1) */ + +done_cleaning: tx_ring->next_to_clean = i; #define TX_WAKE_THRESHOLD (DESC_NEEDED * 2) - if (total_tx_packets && netif_carrier_ok(netdev) && - (IXGBE_DESC_UNUSED(tx_ring) >= TX_WAKE_THRESHOLD)) { + if (unlikely(count && netif_carrier_ok(netdev) && + (IXGBE_DESC_UNUSED(tx_ring) >= TX_WAKE_THRESHOLD))) { /* Make sure that anybody stopping the queue after this * sees the new next_to_clean. */ @@ -269,59 +281,68 @@ static bool ixgbe_clean_tx_irq(struct ixgbe_adapter *adapter, if (__netif_subqueue_stopped(netdev, tx_ring->queue_index) && !test_bit(__IXGBE_DOWN, &adapter->state)) { netif_wake_subqueue(netdev, tx_ring->queue_index); - adapter->restart_queue++; + ++adapter->restart_queue; } } - if (adapter->detect_tx_hung) - if (ixgbe_check_tx_hang(adapter, tx_ring, eop, eop_desc)) - netif_stop_subqueue(netdev, tx_ring->queue_index); + if (adapter->detect_tx_hung) { + if (ixgbe_check_tx_hang(adapter, tx_ring, i)) { + /* schedule immediate reset if we believe we hung */ + DPRINTK(PROBE, INFO, + "tx hang %d detected, resetting adapter\n", + adapter->tx_timeout_count + 1); + ixgbe_tx_timeout(adapter->netdev); + } + } - if (total_tx_packets >= tx_ring->work_limit) - IXGBE_WRITE_REG(&adapter->hw, IXGBE_EICS, tx_ring->eims_value); + /* re-arm the interrupt */ + if ((total_packets >= tx_ring->work_limit) || + (count == tx_ring->count)) + IXGBE_WRITE_REG(&adapter->hw, IXGBE_EICS, tx_ring->v_idx); - tx_ring->total_bytes += total_tx_bytes; - tx_ring->total_packets += total_tx_packets; - adapter->net_stats.tx_bytes += total_tx_bytes; - adapter->net_stats.tx_packets += total_tx_packets; - cleaned = total_tx_packets ? true : false; - return cleaned; + tx_ring->total_bytes += total_bytes; + tx_ring->total_packets += total_packets; + tx_ring->stats.bytes += total_bytes; + tx_ring->stats.packets += total_packets; + adapter->net_stats.tx_bytes += total_bytes; + adapter->net_stats.tx_packets += total_packets; + return (total_packets ? true : false); } -#ifdef CONFIG_DCA +#if defined(CONFIG_DCA) || defined (CONFIG_DCA_MODULE) static void ixgbe_update_rx_dca(struct ixgbe_adapter *adapter, - struct ixgbe_ring *rxr) + struct ixgbe_ring *rx_ring) { u32 rxctrl; int cpu = get_cpu(); - int q = rxr - adapter->rx_ring; + int q = rx_ring - adapter->rx_ring; - if (rxr->cpu != cpu) { + if (rx_ring->cpu != cpu) { rxctrl = IXGBE_READ_REG(&adapter->hw, IXGBE_DCA_RXCTRL(q)); rxctrl &= ~IXGBE_DCA_RXCTRL_CPUID_MASK; - rxctrl |= dca_get_tag(cpu); + rxctrl |= dca3_get_tag(&adapter->pdev->dev, cpu); rxctrl |= IXGBE_DCA_RXCTRL_DESC_DCA_EN; rxctrl |= IXGBE_DCA_RXCTRL_HEAD_DCA_EN; IXGBE_WRITE_REG(&adapter->hw, IXGBE_DCA_RXCTRL(q), rxctrl); - rxr->cpu = cpu; + rx_ring->cpu = cpu; } put_cpu(); } static void ixgbe_update_tx_dca(struct ixgbe_adapter *adapter, - struct ixgbe_ring *txr) + struct ixgbe_ring *tx_ring) { u32 txctrl; int cpu = get_cpu(); - int q = txr - adapter->tx_ring; + int q = tx_ring - adapter->tx_ring; - if (txr->cpu != cpu) { + if (tx_ring->cpu != cpu) { txctrl = IXGBE_READ_REG(&adapter->hw, IXGBE_DCA_TXCTRL(q)); txctrl &= ~IXGBE_DCA_TXCTRL_CPUID_MASK; - txctrl |= dca_get_tag(cpu); + txctrl |= dca3_get_tag(&adapter->pdev->dev, cpu); txctrl |= IXGBE_DCA_TXCTRL_DESC_DCA_EN; IXGBE_WRITE_REG(&adapter->hw, IXGBE_DCA_TXCTRL(q), txctrl); - txr->cpu = cpu; + tx_ring->cpu = cpu; } put_cpu(); } @@ -351,11 +372,14 @@ static int __ixgbe_notify_dca(struct device *dev, void *data) switch (event) { case DCA_PROVIDER_ADD: - adapter->flags |= IXGBE_FLAG_DCA_ENABLED; + /* if we're already enabled, don't do it again */ + if (adapter->flags & IXGBE_FLAG_DCA_ENABLED) + break; /* Always use CB2 mode, difference is masked * in the CB driver. */ IXGBE_WRITE_REG(&adapter->hw, IXGBE_DCA_CTRL, 2); if (dca_add_requester(dev) == 0) { + adapter->flags |= IXGBE_FLAG_DCA_ENABLED; ixgbe_setup_dca(adapter); break; } @@ -372,7 +396,7 @@ static int __ixgbe_notify_dca(struct device *dev, void *data) return 0; } -#endif /* CONFIG_DCA */ +#endif /* CONFIG_DCA or CONFIG_DCA_MODULE */ /** * ixgbe_receive_skb - Send a completed packet up the stack * @adapter: board private structure @@ -420,14 +444,12 @@ static void ixgbe_receive_skb(struct ixgbe_adapter *adapter, * @skb: skb currently being received and modified **/ static inline void ixgbe_rx_checksum(struct ixgbe_adapter *adapter, - u32 status_err, - struct sk_buff *skb) + u32 status_err, struct sk_buff *skb) { skb->ip_summed = CHECKSUM_NONE; - /* Ignore Checksum bit is set, or rx csum disabled */ - if ((status_err & IXGBE_RXD_STAT_IXSM) || - !(adapter->flags & IXGBE_FLAG_RX_CSUM_ENABLED)) + /* Rx csum disabled */ + if (!(adapter->flags & IXGBE_FLAG_RX_CSUM_ENABLED)) return; /* if IP and error */ @@ -455,37 +477,36 @@ static inline void ixgbe_rx_checksum(struct ixgbe_adapter *adapter, * @adapter: address of board private structure **/ static void ixgbe_alloc_rx_buffers(struct ixgbe_adapter *adapter, - struct ixgbe_ring *rx_ring, - int cleaned_count) + struct ixgbe_ring *rx_ring, + int cleaned_count) { struct net_device *netdev = adapter->netdev; struct pci_dev *pdev = adapter->pdev; union ixgbe_adv_rx_desc *rx_desc; - struct ixgbe_rx_buffer *rx_buffer_info; - struct sk_buff *skb; + struct ixgbe_rx_buffer *bi; unsigned int i; - unsigned int bufsz = adapter->rx_buf_len + NET_IP_ALIGN; + unsigned int bufsz = rx_ring->rx_buf_len + NET_IP_ALIGN; i = rx_ring->next_to_use; - rx_buffer_info = &rx_ring->rx_buffer_info[i]; + bi = &rx_ring->rx_buffer_info[i]; while (cleaned_count--) { rx_desc = IXGBE_RX_DESC_ADV(*rx_ring, i); - if (!rx_buffer_info->page && - (adapter->flags & IXGBE_FLAG_RX_PS_ENABLED)) { - rx_buffer_info->page = alloc_page(GFP_ATOMIC); - if (!rx_buffer_info->page) { + if (!bi->page && + (adapter->flags & IXGBE_FLAG_RX_PS_ENABLED)) { + bi->page = alloc_page(GFP_ATOMIC); + if (!bi->page) { adapter->alloc_rx_page_failed++; goto no_buffers; } - rx_buffer_info->page_dma = - pci_map_page(pdev, rx_buffer_info->page, - 0, PAGE_SIZE, PCI_DMA_FROMDEVICE); + bi->page_dma = pci_map_page(pdev, bi->page, 0, + PAGE_SIZE, + PCI_DMA_FROMDEVICE); } - if (!rx_buffer_info->skb) { - skb = netdev_alloc_skb(netdev, bufsz); + if (!bi->skb) { + struct sk_buff *skb = netdev_alloc_skb(netdev, bufsz); if (!skb) { adapter->alloc_rx_buff_failed++; @@ -499,28 +520,25 @@ static void ixgbe_alloc_rx_buffers(struct ixgbe_adapter *adapter, */ skb_reserve(skb, NET_IP_ALIGN); - rx_buffer_info->skb = skb; - rx_buffer_info->dma = pci_map_single(pdev, skb->data, - bufsz, - PCI_DMA_FROMDEVICE); + bi->skb = skb; + bi->dma = pci_map_single(pdev, skb->data, bufsz, + PCI_DMA_FROMDEVICE); } /* Refresh the desc even if buffer_addrs didn't change because * each write-back erases this info. */ if (adapter->flags & IXGBE_FLAG_RX_PS_ENABLED) { - rx_desc->read.pkt_addr = - cpu_to_le64(rx_buffer_info->page_dma); - rx_desc->read.hdr_addr = - cpu_to_le64(rx_buffer_info->dma); + rx_desc->read.pkt_addr = cpu_to_le64(bi->page_dma); + rx_desc->read.hdr_addr = cpu_to_le64(bi->dma); } else { - rx_desc->read.pkt_addr = - cpu_to_le64(rx_buffer_info->dma); + rx_desc->read.pkt_addr = cpu_to_le64(bi->dma); } i++; if (i == rx_ring->count) i = 0; - rx_buffer_info = &rx_ring->rx_buffer_info[i]; + bi = &rx_ring->rx_buffer_info[i]; } + no_buffers: if (rx_ring->next_to_use != i) { rx_ring->next_to_use = i; @@ -538,9 +556,19 @@ no_buffers: } } +static inline u16 ixgbe_get_hdr_info(union ixgbe_adv_rx_desc *rx_desc) +{ + return rx_desc->wb.lower.lo_dword.hs_rss.hdr_info; +} + +static inline u16 ixgbe_get_pkt_info(union ixgbe_adv_rx_desc *rx_desc) +{ + return rx_desc->wb.lower.lo_dword.hs_rss.pkt_info; +} + static bool ixgbe_clean_rx_irq(struct ixgbe_adapter *adapter, - struct ixgbe_ring *rx_ring, - int *work_done, int work_to_do) + struct ixgbe_ring *rx_ring, + int *work_done, int work_to_do) { struct net_device *netdev = adapter->netdev; struct pci_dev *pdev = adapter->pdev; @@ -548,36 +576,35 @@ static bool ixgbe_clean_rx_irq(struct ixgbe_adapter *adapter, struct ixgbe_rx_buffer *rx_buffer_info, *next_buffer; struct sk_buff *skb; unsigned int i; - u32 upper_len, len, staterr; + u32 len, staterr; u16 hdr_info; bool cleaned = false; int cleaned_count = 0; unsigned int total_rx_bytes = 0, total_rx_packets = 0; i = rx_ring->next_to_clean; - upper_len = 0; rx_desc = IXGBE_RX_DESC_ADV(*rx_ring, i); staterr = le32_to_cpu(rx_desc->wb.upper.status_error); rx_buffer_info = &rx_ring->rx_buffer_info[i]; while (staterr & IXGBE_RXD_STAT_DD) { + u32 upper_len = 0; if (*work_done >= work_to_do) break; (*work_done)++; if (adapter->flags & IXGBE_FLAG_RX_PS_ENABLED) { - hdr_info = - le16_to_cpu(rx_desc->wb.lower.lo_dword.hdr_info); - len = - ((hdr_info & IXGBE_RXDADV_HDRBUFLEN_MASK) >> - IXGBE_RXDADV_HDRBUFLEN_SHIFT); + hdr_info = le16_to_cpu(ixgbe_get_hdr_info(rx_desc)); + len = (hdr_info & IXGBE_RXDADV_HDRBUFLEN_MASK) >> + IXGBE_RXDADV_HDRBUFLEN_SHIFT; if (hdr_info & IXGBE_RXDADV_SPH) adapter->rx_hdr_split++; if (len > IXGBE_RX_HDR_SIZE) len = IXGBE_RX_HDR_SIZE; upper_len = le16_to_cpu(rx_desc->wb.upper.length); - } else + } else { len = le16_to_cpu(rx_desc->wb.upper.length); + } cleaned = true; skb = rx_buffer_info->skb; @@ -586,8 +613,8 @@ static bool ixgbe_clean_rx_irq(struct ixgbe_adapter *adapter, if (len && !skb_shinfo(skb)->nr_frags) { pci_unmap_single(pdev, rx_buffer_info->dma, - adapter->rx_buf_len + NET_IP_ALIGN, - PCI_DMA_FROMDEVICE); + rx_ring->rx_buf_len + NET_IP_ALIGN, + PCI_DMA_FROMDEVICE); skb_put(skb, len); } @@ -666,9 +693,6 @@ next_desc: if (cleaned_count) ixgbe_alloc_rx_buffers(adapter, rx_ring, cleaned_count); - adapter->net_stats.rx_bytes += total_rx_bytes; - adapter->net_stats.rx_packets += total_rx_packets; - rx_ring->total_packets += total_rx_packets; rx_ring->total_bytes += total_rx_bytes; adapter->net_stats.rx_bytes += total_rx_bytes; @@ -901,7 +925,7 @@ static irqreturn_t ixgbe_msix_clean_tx(int irq, void *data) { struct ixgbe_q_vector *q_vector = data; struct ixgbe_adapter *adapter = q_vector->adapter; - struct ixgbe_ring *txr; + struct ixgbe_ring *tx_ring; int i, r_idx; if (!q_vector->txr_count) @@ -909,14 +933,14 @@ static irqreturn_t ixgbe_msix_clean_tx(int irq, void *data) r_idx = find_first_bit(q_vector->txr_idx, adapter->num_tx_queues); for (i = 0; i < q_vector->txr_count; i++) { - txr = &(adapter->tx_ring[r_idx]); -#ifdef CONFIG_DCA + tx_ring = &(adapter->tx_ring[r_idx]); +#if defined(CONFIG_DCA) || defined (CONFIG_DCA_MODULE) if (adapter->flags & IXGBE_FLAG_DCA_ENABLED) - ixgbe_update_tx_dca(adapter, txr); + ixgbe_update_tx_dca(adapter, tx_ring); #endif - txr->total_bytes = 0; - txr->total_packets = 0; - ixgbe_clean_tx_irq(adapter, txr); + tx_ring->total_bytes = 0; + tx_ring->total_packets = 0; + ixgbe_clean_tx_irq(adapter, tx_ring); r_idx = find_next_bit(q_vector->txr_idx, adapter->num_tx_queues, r_idx + 1); } @@ -933,18 +957,18 @@ static irqreturn_t ixgbe_msix_clean_rx(int irq, void *data) { struct ixgbe_q_vector *q_vector = data; struct ixgbe_adapter *adapter = q_vector->adapter; - struct ixgbe_ring *rxr; + struct ixgbe_ring *rx_ring; int r_idx; r_idx = find_first_bit(q_vector->rxr_idx, adapter->num_rx_queues); if (!q_vector->rxr_count) return IRQ_HANDLED; - rxr = &(adapter->rx_ring[r_idx]); + rx_ring = &(adapter->rx_ring[r_idx]); /* disable interrupts on this vector only */ - IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC, rxr->v_idx); - rxr->total_bytes = 0; - rxr->total_packets = 0; + IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC, rx_ring->v_idx); + rx_ring->total_bytes = 0; + rx_ring->total_packets = 0; netif_rx_schedule(adapter->netdev, &q_vector->napi); return IRQ_HANDLED; @@ -969,18 +993,18 @@ static int ixgbe_clean_rxonly(struct napi_struct *napi, int budget) struct ixgbe_q_vector *q_vector = container_of(napi, struct ixgbe_q_vector, napi); struct ixgbe_adapter *adapter = q_vector->adapter; - struct ixgbe_ring *rxr; + struct ixgbe_ring *rx_ring; int work_done = 0; long r_idx; r_idx = find_first_bit(q_vector->rxr_idx, adapter->num_rx_queues); - rxr = &(adapter->rx_ring[r_idx]); -#ifdef CONFIG_DCA + rx_ring = &(adapter->rx_ring[r_idx]); +#if defined(CONFIG_DCA) || defined (CONFIG_DCA_MODULE) if (adapter->flags & IXGBE_FLAG_DCA_ENABLED) - ixgbe_update_rx_dca(adapter, rxr); + ixgbe_update_rx_dca(adapter, rx_ring); #endif - ixgbe_clean_rx_irq(adapter, rxr, &work_done, budget); + ixgbe_clean_rx_irq(adapter, rx_ring, &work_done, budget); /* If all Rx work done, exit the polling mode */ if (work_done < budget) { @@ -988,7 +1012,7 @@ static int ixgbe_clean_rxonly(struct napi_struct *napi, int budget) if (adapter->rx_eitr < IXGBE_MIN_ITR_USECS) ixgbe_set_itr_msix(q_vector); if (!test_bit(__IXGBE_DOWN, &adapter->state)) - IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMS, rxr->v_idx); + IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMS, rx_ring->v_idx); } return work_done; @@ -1347,26 +1371,31 @@ static void ixgbe_configure_msi_and_legacy(struct ixgbe_adapter *adapter) } /** - * ixgbe_configure_tx - Configure 8254x Transmit Unit after Reset + * ixgbe_configure_tx - Configure 8259x Transmit Unit after Reset * @adapter: board private structure * * Configure the Tx unit of the MAC after a reset. **/ static void ixgbe_configure_tx(struct ixgbe_adapter *adapter) { - u64 tdba; + u64 tdba, tdwba; struct ixgbe_hw *hw = &adapter->hw; u32 i, j, tdlen, txctrl; /* Setup the HW Tx Head and Tail descriptor pointers */ for (i = 0; i < adapter->num_tx_queues; i++) { - j = adapter->tx_ring[i].reg_idx; - tdba = adapter->tx_ring[i].dma; - tdlen = adapter->tx_ring[i].count * - sizeof(union ixgbe_adv_tx_desc); + struct ixgbe_ring *ring = &adapter->tx_ring[i]; + j = ring->reg_idx; + tdba = ring->dma; + tdlen = ring->count * sizeof(union ixgbe_adv_tx_desc); IXGBE_WRITE_REG(hw, IXGBE_TDBAL(j), - (tdba & DMA_32BIT_MASK)); + (tdba & DMA_32BIT_MASK)); IXGBE_WRITE_REG(hw, IXGBE_TDBAH(j), (tdba >> 32)); + tdwba = ring->dma + + (ring->count * sizeof(union ixgbe_adv_tx_desc)); + tdwba |= IXGBE_TDWBAL_HEAD_WB_ENABLE; + IXGBE_WRITE_REG(hw, IXGBE_TDWBAL(j), tdwba & DMA_32BIT_MASK); + IXGBE_WRITE_REG(hw, IXGBE_TDWBAH(j), (tdwba >> 32)); IXGBE_WRITE_REG(hw, IXGBE_TDLEN(j), tdlen); IXGBE_WRITE_REG(hw, IXGBE_TDH(j), 0); IXGBE_WRITE_REG(hw, IXGBE_TDT(j), 0); @@ -1375,16 +1404,62 @@ static void ixgbe_configure_tx(struct ixgbe_adapter *adapter) /* Disable Tx Head Writeback RO bit, since this hoses * bookkeeping if things aren't delivered in order. */ - txctrl = IXGBE_READ_REG(hw, IXGBE_DCA_TXCTRL(i)); + txctrl = IXGBE_READ_REG(hw, IXGBE_DCA_TXCTRL(j)); txctrl &= ~IXGBE_DCA_TXCTRL_TX_WB_RO_EN; - IXGBE_WRITE_REG(hw, IXGBE_DCA_TXCTRL(i), txctrl); + IXGBE_WRITE_REG(hw, IXGBE_DCA_TXCTRL(j), txctrl); } } -#define PAGE_USE_COUNT(S) (((S) >> PAGE_SHIFT) + \ - (((S) & (PAGE_SIZE - 1)) ? 1 : 0)) +#define IXGBE_SRRCTL_BSIZEHDRSIZE_SHIFT 2 + +static void ixgbe_configure_srrctl(struct ixgbe_adapter *adapter, int index) +{ + struct ixgbe_ring *rx_ring; + u32 srrctl; + int queue0; + unsigned long mask; + + /* program one srrctl register per VMDq index */ + if (adapter->flags & IXGBE_FLAG_VMDQ_ENABLED) { + long shift, len; + mask = (unsigned long) adapter->ring_feature[RING_F_RSS].mask; + len = sizeof(adapter->ring_feature[RING_F_VMDQ].mask) * 8; + shift = find_first_bit(&mask, len); + queue0 = index & mask; + index = (index & mask) >> shift; + /* program one srrctl per RSS queue since RDRXCTL.MVMEN is enabled */ + } else { + mask = (unsigned long) adapter->ring_feature[RING_F_RSS].mask; + queue0 = index & mask; + index = index & mask; + } + + rx_ring = &adapter->rx_ring[queue0]; + + srrctl = IXGBE_READ_REG(&adapter->hw, IXGBE_SRRCTL(index)); + + srrctl &= ~IXGBE_SRRCTL_BSIZEHDR_MASK; + srrctl &= ~IXGBE_SRRCTL_BSIZEPKT_MASK; + + if (adapter->flags & IXGBE_FLAG_RX_PS_ENABLED) { + srrctl |= IXGBE_RXBUFFER_2048 >> IXGBE_SRRCTL_BSIZEPKT_SHIFT; + srrctl |= IXGBE_SRRCTL_DESCTYPE_HDR_SPLIT_ALWAYS; + srrctl |= ((IXGBE_RX_HDR_SIZE << + IXGBE_SRRCTL_BSIZEHDRSIZE_SHIFT) & + IXGBE_SRRCTL_BSIZEHDR_MASK); + } else { + srrctl |= IXGBE_SRRCTL_DESCTYPE_ADV_ONEBUF; + + if (rx_ring->rx_buf_len == MAXIMUM_ETHERNET_VLAN_SIZE) + srrctl |= IXGBE_RXBUFFER_2048 >> + IXGBE_SRRCTL_BSIZEPKT_SHIFT; + else + srrctl |= rx_ring->rx_buf_len >> + IXGBE_SRRCTL_BSIZEPKT_SHIFT; + } + IXGBE_WRITE_REG(&adapter->hw, IXGBE_SRRCTL(index), srrctl); +} -#define IXGBE_SRRCTL_BSIZEHDRSIZE_SHIFT 2 /** * ixgbe_get_skb_hdr - helper function for LRO header processing * @skb: pointer to sk_buff to be added to LRO packet @@ -1399,8 +1474,8 @@ static int ixgbe_get_skb_hdr(struct sk_buff *skb, void **iphdr, void **tcph, union ixgbe_adv_rx_desc *rx_desc = priv; /* Verify that this is a valid IPv4 TCP packet */ - if (!(rx_desc->wb.lower.lo_dword.pkt_info & - (IXGBE_RXDADV_PKTTYPE_IPV4 | IXGBE_RXDADV_PKTTYPE_TCP))) + if (!((ixgbe_get_pkt_info(rx_desc) & IXGBE_RXDADV_PKTTYPE_IPV4) && + (ixgbe_get_pkt_info(rx_desc) & IXGBE_RXDADV_PKTTYPE_TCP))) return -1; /* Set network headers */ @@ -1412,8 +1487,11 @@ static int ixgbe_get_skb_hdr(struct sk_buff *skb, void **iphdr, void **tcph, return 0; } +#define PAGE_USE_COUNT(S) (((S) >> PAGE_SHIFT) + \ + (((S) & (PAGE_SIZE - 1)) ? 1 : 0)) + /** - * ixgbe_configure_rx - Configure 8254x Receive Unit after Reset + * ixgbe_configure_rx - Configure 8259x Receive Unit after Reset * @adapter: board private structure * * Configure the Rx unit of the MAC after a reset. @@ -1426,10 +1504,14 @@ static void ixgbe_configure_rx(struct ixgbe_adapter *adapter) int max_frame = netdev->mtu + ETH_HLEN + ETH_FCS_LEN; int i, j; u32 rdlen, rxctrl, rxcsum; - u32 random[10]; + static const u32 seed[10] = { 0xE291D73D, 0x1805EC6C, 0x2A94B30D, + 0xA54F2BEC, 0xEA49AF7C, 0xE214AD3D, 0xB855AABE, + 0x6A3E67EA, 0x14364D17, 0x3BED200D}; u32 fctrl, hlreg0; u32 pages; - u32 reta = 0, mrqc, srrctl; + u32 reta = 0, mrqc; + u32 rdrxctl; + int rx_buf_len; /* Decide whether to use packet split mode or not */ if (netdev->mtu > ETH_DATA_LEN) @@ -1439,12 +1521,12 @@ static void ixgbe_configure_rx(struct ixgbe_adapter *adapter) /* Set the RX buffer length according to the mode */ if (adapter->flags & IXGBE_FLAG_RX_PS_ENABLED) { - adapter->rx_buf_len = IXGBE_RX_HDR_SIZE; + rx_buf_len = IXGBE_RX_HDR_SIZE; } else { if (netdev->mtu <= ETH_DATA_LEN) - adapter->rx_buf_len = MAXIMUM_ETHERNET_VLAN_SIZE; + rx_buf_len = MAXIMUM_ETHERNET_VLAN_SIZE; else - adapter->rx_buf_len = ALIGN(max_frame, 1024); + rx_buf_len = ALIGN(max_frame, 1024); } fctrl = IXGBE_READ_REG(&adapter->hw, IXGBE_FCTRL); @@ -1461,28 +1543,6 @@ static void ixgbe_configure_rx(struct ixgbe_adapter *adapter) pages = PAGE_USE_COUNT(adapter->netdev->mtu); - srrctl = IXGBE_READ_REG(&adapter->hw, IXGBE_SRRCTL(0)); - srrctl &= ~IXGBE_SRRCTL_BSIZEHDR_MASK; - srrctl &= ~IXGBE_SRRCTL_BSIZEPKT_MASK; - - if (adapter->flags & IXGBE_FLAG_RX_PS_ENABLED) { - srrctl |= PAGE_SIZE >> IXGBE_SRRCTL_BSIZEPKT_SHIFT; - srrctl |= IXGBE_SRRCTL_DESCTYPE_HDR_SPLIT_ALWAYS; - srrctl |= ((IXGBE_RX_HDR_SIZE << - IXGBE_SRRCTL_BSIZEHDRSIZE_SHIFT) & - IXGBE_SRRCTL_BSIZEHDR_MASK); - } else { - srrctl |= IXGBE_SRRCTL_DESCTYPE_ADV_ONEBUF; - - if (adapter->rx_buf_len == MAXIMUM_ETHERNET_VLAN_SIZE) - srrctl |= - IXGBE_RXBUFFER_2048 >> IXGBE_SRRCTL_BSIZEPKT_SHIFT; - else - srrctl |= - adapter->rx_buf_len >> IXGBE_SRRCTL_BSIZEPKT_SHIFT; - } - IXGBE_WRITE_REG(&adapter->hw, IXGBE_SRRCTL(0), srrctl); - rdlen = adapter->rx_ring[0].count * sizeof(union ixgbe_adv_rx_desc); /* disable receives while setting up the descriptors */ rxctrl = IXGBE_READ_REG(hw, IXGBE_RXCTRL); @@ -1492,25 +1552,43 @@ static void ixgbe_configure_rx(struct ixgbe_adapter *adapter) * the Base and Length of the Rx Descriptor Ring */ for (i = 0; i < adapter->num_rx_queues; i++) { rdba = adapter->rx_ring[i].dma; - IXGBE_WRITE_REG(hw, IXGBE_RDBAL(i), (rdba & DMA_32BIT_MASK)); - IXGBE_WRITE_REG(hw, IXGBE_RDBAH(i), (rdba >> 32)); - IXGBE_WRITE_REG(hw, IXGBE_RDLEN(i), rdlen); - IXGBE_WRITE_REG(hw, IXGBE_RDH(i), 0); - IXGBE_WRITE_REG(hw, IXGBE_RDT(i), 0); - adapter->rx_ring[i].head = IXGBE_RDH(i); - adapter->rx_ring[i].tail = IXGBE_RDT(i); - } - - /* Intitial LRO Settings */ - adapter->rx_ring[i].lro_mgr.max_aggr = IXGBE_MAX_LRO_AGGREGATE; - adapter->rx_ring[i].lro_mgr.max_desc = IXGBE_MAX_LRO_DESCRIPTORS; - adapter->rx_ring[i].lro_mgr.get_skb_header = ixgbe_get_skb_hdr; - adapter->rx_ring[i].lro_mgr.features = LRO_F_EXTRACT_VLAN_ID; - if (!(adapter->flags & IXGBE_FLAG_IN_NETPOLL)) - adapter->rx_ring[i].lro_mgr.features |= LRO_F_NAPI; - adapter->rx_ring[i].lro_mgr.dev = adapter->netdev; - adapter->rx_ring[i].lro_mgr.ip_summed = CHECKSUM_UNNECESSARY; - adapter->rx_ring[i].lro_mgr.ip_summed_aggr = CHECKSUM_UNNECESSARY; + j = adapter->rx_ring[i].reg_idx; + IXGBE_WRITE_REG(hw, IXGBE_RDBAL(j), (rdba & DMA_32BIT_MASK)); + IXGBE_WRITE_REG(hw, IXGBE_RDBAH(j), (rdba >> 32)); + IXGBE_WRITE_REG(hw, IXGBE_RDLEN(j), rdlen); + IXGBE_WRITE_REG(hw, IXGBE_RDH(j), 0); + IXGBE_WRITE_REG(hw, IXGBE_RDT(j), 0); + adapter->rx_ring[i].head = IXGBE_RDH(j); + adapter->rx_ring[i].tail = IXGBE_RDT(j); + adapter->rx_ring[i].rx_buf_len = rx_buf_len; + /* Intitial LRO Settings */ + adapter->rx_ring[i].lro_mgr.max_aggr = IXGBE_MAX_LRO_AGGREGATE; + adapter->rx_ring[i].lro_mgr.max_desc = IXGBE_MAX_LRO_DESCRIPTORS; + adapter->rx_ring[i].lro_mgr.get_skb_header = ixgbe_get_skb_hdr; + adapter->rx_ring[i].lro_mgr.features = LRO_F_EXTRACT_VLAN_ID; + if (!(adapter->flags & IXGBE_FLAG_IN_NETPOLL)) + adapter->rx_ring[i].lro_mgr.features |= LRO_F_NAPI; + adapter->rx_ring[i].lro_mgr.dev = adapter->netdev; + adapter->rx_ring[i].lro_mgr.ip_summed = CHECKSUM_UNNECESSARY; + adapter->rx_ring[i].lro_mgr.ip_summed_aggr = CHECKSUM_UNNECESSARY; + + ixgbe_configure_srrctl(adapter, j); + } + + /* + * For VMDq support of different descriptor types or + * buffer sizes through the use of multiple SRRCTL + * registers, RDRXCTL.MVMEN must be set to 1 + * + * also, the manual doesn't mention it clearly but DCA hints + * will only use queue 0's tags unless this bit is set. Side + * effects of setting this bit are only that SRRCTL must be + * fully programmed [0..15] + */ + rdrxctl = IXGBE_READ_REG(hw, IXGBE_RDRXCTL); + rdrxctl |= IXGBE_RDRXCTL_MVMEN; + IXGBE_WRITE_REG(hw, IXGBE_RDRXCTL, rdrxctl); + if (adapter->flags & IXGBE_FLAG_RSS_ENABLED) { /* Fill out redirection table */ @@ -1525,22 +1603,20 @@ static void ixgbe_configure_rx(struct ixgbe_adapter *adapter) } /* Fill out hash function seeds */ - /* XXX use a random constant here to glue certain flows */ - get_random_bytes(&random[0], 40); for (i = 0; i < 10; i++) - IXGBE_WRITE_REG(hw, IXGBE_RSSRK(i), random[i]); + IXGBE_WRITE_REG(hw, IXGBE_RSSRK(i), seed[i]); mrqc = IXGBE_MRQC_RSSEN /* Perform hash on these packet types */ - | IXGBE_MRQC_RSS_FIELD_IPV4 - | IXGBE_MRQC_RSS_FIELD_IPV4_TCP - | IXGBE_MRQC_RSS_FIELD_IPV4_UDP - | IXGBE_MRQC_RSS_FIELD_IPV6_EX_TCP - | IXGBE_MRQC_RSS_FIELD_IPV6_EX - | IXGBE_MRQC_RSS_FIELD_IPV6 - | IXGBE_MRQC_RSS_FIELD_IPV6_TCP - | IXGBE_MRQC_RSS_FIELD_IPV6_UDP - | IXGBE_MRQC_RSS_FIELD_IPV6_EX_UDP; + | IXGBE_MRQC_RSS_FIELD_IPV4 + | IXGBE_MRQC_RSS_FIELD_IPV4_TCP + | IXGBE_MRQC_RSS_FIELD_IPV4_UDP + | IXGBE_MRQC_RSS_FIELD_IPV6_EX_TCP + | IXGBE_MRQC_RSS_FIELD_IPV6_EX + | IXGBE_MRQC_RSS_FIELD_IPV6 + | IXGBE_MRQC_RSS_FIELD_IPV6_TCP + | IXGBE_MRQC_RSS_FIELD_IPV6_UDP + | IXGBE_MRQC_RSS_FIELD_IPV6_EX_UDP; IXGBE_WRITE_REG(hw, IXGBE_MRQC, mrqc); } @@ -1621,23 +1697,37 @@ static void ixgbe_restore_vlan(struct ixgbe_adapter *adapter) } } +static u8 *ixgbe_addr_list_itr(struct ixgbe_hw *hw, u8 **mc_addr_ptr, u32 *vmdq) +{ + struct dev_mc_list *mc_ptr; + u8 *addr = *mc_addr_ptr; + *vmdq = 0; + + mc_ptr = container_of(addr, struct dev_mc_list, dmi_addr[0]); + if (mc_ptr->next) + *mc_addr_ptr = mc_ptr->next->dmi_addr; + else + *mc_addr_ptr = NULL; + + return addr; +} + /** - * ixgbe_set_multi - Multicast and Promiscuous mode set + * ixgbe_set_rx_mode - Unicast, Multicast and Promiscuous mode set * @netdev: network interface device structure * - * The set_multi entry point is called whenever the multicast address - * list or the network interface flags are updated. This routine is - * responsible for configuring the hardware for proper multicast, - * promiscuous mode, and all-multi behavior. + * The set_rx_method entry point is called whenever the unicast/multicast + * address list or the network interface flags are updated. This routine is + * responsible for configuring the hardware for proper unicast, multicast and + * promiscuous mode. **/ -static void ixgbe_set_multi(struct net_device *netdev) +static void ixgbe_set_rx_mode(struct net_device *netdev) { struct ixgbe_adapter *adapter = netdev_priv(netdev); struct ixgbe_hw *hw = &adapter->hw; - struct dev_mc_list *mc_ptr; - u8 *mta_list; u32 fctrl, vlnctrl; - int i; + u8 *addr_list = NULL; + int addr_count = 0; /* Check for Promiscuous and All Multicast modes */ @@ -1645,6 +1735,7 @@ static void ixgbe_set_multi(struct net_device *netdev) vlnctrl = IXGBE_READ_REG(hw, IXGBE_VLNCTRL); if (netdev->flags & IFF_PROMISC) { + hw->addr_ctrl.user_set_promisc = 1; fctrl |= (IXGBE_FCTRL_UPE | IXGBE_FCTRL_MPE); vlnctrl &= ~IXGBE_VLNCTRL_VFE; } else { @@ -1655,33 +1746,25 @@ static void ixgbe_set_multi(struct net_device *netdev) fctrl &= ~(IXGBE_FCTRL_UPE | IXGBE_FCTRL_MPE); } vlnctrl |= IXGBE_VLNCTRL_VFE; + hw->addr_ctrl.user_set_promisc = 0; } IXGBE_WRITE_REG(hw, IXGBE_FCTRL, fctrl); IXGBE_WRITE_REG(hw, IXGBE_VLNCTRL, vlnctrl); - if (netdev->mc_count) { - mta_list = kcalloc(netdev->mc_count, ETH_ALEN, GFP_ATOMIC); - if (!mta_list) - return; - - /* Shared function expects packed array of only addresses. */ - mc_ptr = netdev->mc_list; - - for (i = 0; i < netdev->mc_count; i++) { - if (!mc_ptr) - break; - memcpy(mta_list + (i * ETH_ALEN), mc_ptr->dmi_addr, - ETH_ALEN); - mc_ptr = mc_ptr->next; - } - - ixgbe_update_mc_addr_list(hw, mta_list, i, 0); - kfree(mta_list); - } else { - ixgbe_update_mc_addr_list(hw, NULL, 0, 0); - } + /* reprogram secondary unicast list */ + addr_count = netdev->uc_count; + if (addr_count) + addr_list = netdev->uc_list->dmi_addr; + ixgbe_update_uc_addr_list(hw, addr_list, addr_count, + ixgbe_addr_list_itr); + /* reprogram multicast list */ + addr_count = netdev->mc_count; + if (addr_count) + addr_list = netdev->mc_list->dmi_addr; + ixgbe_update_mc_addr_list(hw, addr_list, addr_count, + ixgbe_addr_list_itr); } static void ixgbe_napi_enable_all(struct ixgbe_adapter *adapter) @@ -1725,7 +1808,7 @@ static void ixgbe_configure(struct ixgbe_adapter *adapter) struct net_device *netdev = adapter->netdev; int i; - ixgbe_set_multi(netdev); + ixgbe_set_rx_mode(netdev); ixgbe_restore_vlan(adapter); @@ -1778,6 +1861,8 @@ static int ixgbe_up_complete(struct ixgbe_adapter *adapter) for (i = 0; i < adapter->num_tx_queues; i++) { j = adapter->tx_ring[i].reg_idx; txdctl = IXGBE_READ_REG(hw, IXGBE_TXDCTL(j)); + /* enable WTHRESH=8 descriptors, to encourage burst writeback */ + txdctl |= (8 << 16); txdctl |= IXGBE_TXDCTL_ENABLE; IXGBE_WRITE_REG(hw, IXGBE_TXDCTL(j), txdctl); } @@ -1901,7 +1986,7 @@ static void ixgbe_clean_rx_ring(struct ixgbe_adapter *adapter, rx_buffer_info = &rx_ring->rx_buffer_info[i]; if (rx_buffer_info->dma) { pci_unmap_single(pdev, rx_buffer_info->dma, - adapter->rx_buf_len, + rx_ring->rx_buf_len, PCI_DMA_FROMDEVICE); rx_buffer_info->dma = 0; } @@ -2017,11 +2102,28 @@ void ixgbe_down(struct ixgbe_adapter *adapter) netif_carrier_off(netdev); netif_tx_stop_all_queues(netdev); +#if defined(CONFIG_DCA) || defined (CONFIG_DCA_MODULE) + if (adapter->flags & IXGBE_FLAG_DCA_ENABLED) { + adapter->flags &= ~IXGBE_FLAG_DCA_ENABLED; + dca_remove_requester(&adapter->pdev->dev); + } + +#endif if (!pci_channel_offline(adapter->pdev)) ixgbe_reset(adapter); ixgbe_clean_all_tx_rings(adapter); ixgbe_clean_all_rx_rings(adapter); +#if defined(CONFIG_DCA) || defined (CONFIG_DCA_MODULE) + /* since we reset the hardware DCA settings were cleared */ + if (dca_add_requester(&adapter->pdev->dev) == 0) { + adapter->flags |= IXGBE_FLAG_DCA_ENABLED; + /* always use CB2 mode, difference is masked + * in the CB driver */ + IXGBE_WRITE_REG(&adapter->hw, IXGBE_DCA_CTRL, 2); + ixgbe_setup_dca(adapter); + } +#endif } static int ixgbe_suspend(struct pci_dev *pdev, pm_message_t state) @@ -2076,7 +2178,7 @@ static int ixgbe_poll(struct napi_struct *napi, int budget) struct ixgbe_adapter *adapter = q_vector->adapter; int tx_cleaned = 0, work_done = 0; -#ifdef CONFIG_DCA +#if defined(CONFIG_DCA) || defined (CONFIG_DCA_MODULE) if (adapter->flags & IXGBE_FLAG_DCA_ENABLED) { ixgbe_update_tx_dca(adapter, adapter->tx_ring); ixgbe_update_rx_dca(adapter, adapter->rx_ring); @@ -2455,8 +2557,12 @@ static int __devinit ixgbe_sw_init(struct ixgbe_adapter *adapter) adapter->tx_eitr = 1; /* default flow control settings */ - hw->fc.original_type = ixgbe_fc_full; - hw->fc.type = ixgbe_fc_full; + hw->fc.original_type = ixgbe_fc_none; + hw->fc.type = ixgbe_fc_none; + hw->fc.high_water = IXGBE_DEFAULT_FCRTH; + hw->fc.low_water = IXGBE_DEFAULT_FCRTL; + hw->fc.pause_time = IXGBE_DEFAULT_FCPAUSE; + hw->fc.send_xon = true; /* select 10G link by default */ hw->mac.link_mode_select = IXGBE_AUTOC_LMS_10G_LINK_NO_AN; @@ -2487,93 +2593,94 @@ static int __devinit ixgbe_sw_init(struct ixgbe_adapter *adapter) /** * ixgbe_setup_tx_resources - allocate Tx resources (Descriptors) * @adapter: board private structure - * @txdr: tx descriptor ring (for a specific queue) to setup + * @tx_ring: tx descriptor ring (for a specific queue) to setup * * Return 0 on success, negative on failure **/ int ixgbe_setup_tx_resources(struct ixgbe_adapter *adapter, - struct ixgbe_ring *txdr) + struct ixgbe_ring *tx_ring) { struct pci_dev *pdev = adapter->pdev; int size; - size = sizeof(struct ixgbe_tx_buffer) * txdr->count; - txdr->tx_buffer_info = vmalloc(size); - if (!txdr->tx_buffer_info) { - DPRINTK(PROBE, ERR, - "Unable to allocate memory for the transmit descriptor ring\n"); - return -ENOMEM; - } - memset(txdr->tx_buffer_info, 0, size); + size = sizeof(struct ixgbe_tx_buffer) * tx_ring->count; + tx_ring->tx_buffer_info = vmalloc(size); + if (!tx_ring->tx_buffer_info) + goto err; + memset(tx_ring->tx_buffer_info, 0, size); /* round up to nearest 4K */ - txdr->size = txdr->count * sizeof(union ixgbe_adv_tx_desc); - txdr->size = ALIGN(txdr->size, 4096); - - txdr->desc = pci_alloc_consistent(pdev, txdr->size, &txdr->dma); - if (!txdr->desc) { - vfree(txdr->tx_buffer_info); - DPRINTK(PROBE, ERR, - "Memory allocation failed for the tx desc ring\n"); - return -ENOMEM; - } + tx_ring->size = tx_ring->count * sizeof(union ixgbe_adv_tx_desc) + + sizeof(u32); + tx_ring->size = ALIGN(tx_ring->size, 4096); - txdr->next_to_use = 0; - txdr->next_to_clean = 0; - txdr->work_limit = txdr->count; + tx_ring->desc = pci_alloc_consistent(pdev, tx_ring->size, + &tx_ring->dma); + if (!tx_ring->desc) + goto err; + tx_ring->next_to_use = 0; + tx_ring->next_to_clean = 0; + tx_ring->work_limit = tx_ring->count; return 0; + +err: + vfree(tx_ring->tx_buffer_info); + tx_ring->tx_buffer_info = NULL; + DPRINTK(PROBE, ERR, "Unable to allocate memory for the transmit " + "descriptor ring\n"); + return -ENOMEM; } /** * ixgbe_setup_rx_resources - allocate Rx resources (Descriptors) * @adapter: board private structure - * @rxdr: rx descriptor ring (for a specific queue) to setup + * @rx_ring: rx descriptor ring (for a specific queue) to setup * * Returns 0 on success, negative on failure **/ int ixgbe_setup_rx_resources(struct ixgbe_adapter *adapter, - struct ixgbe_ring *rxdr) + struct ixgbe_ring *rx_ring) { struct pci_dev *pdev = adapter->pdev; int size; size = sizeof(struct net_lro_desc) * IXGBE_MAX_LRO_DESCRIPTORS; - rxdr->lro_mgr.lro_arr = vmalloc(size); - if (!rxdr->lro_mgr.lro_arr) + rx_ring->lro_mgr.lro_arr = vmalloc(size); + if (!rx_ring->lro_mgr.lro_arr) return -ENOMEM; - memset(rxdr->lro_mgr.lro_arr, 0, size); + memset(rx_ring->lro_mgr.lro_arr, 0, size); - size = sizeof(struct ixgbe_rx_buffer) * rxdr->count; - rxdr->rx_buffer_info = vmalloc(size); - if (!rxdr->rx_buffer_info) { + size = sizeof(struct ixgbe_rx_buffer) * rx_ring->count; + rx_ring->rx_buffer_info = vmalloc(size); + if (!rx_ring->rx_buffer_info) { DPRINTK(PROBE, ERR, "vmalloc allocation failed for the rx desc ring\n"); goto alloc_failed; } - memset(rxdr->rx_buffer_info, 0, size); + memset(rx_ring->rx_buffer_info, 0, size); /* Round up to nearest 4K */ - rxdr->size = rxdr->count * sizeof(union ixgbe_adv_rx_desc); - rxdr->size = ALIGN(rxdr->size, 4096); + rx_ring->size = rx_ring->count * sizeof(union ixgbe_adv_rx_desc); + rx_ring->size = ALIGN(rx_ring->size, 4096); - rxdr->desc = pci_alloc_consistent(pdev, rxdr->size, &rxdr->dma); + rx_ring->desc = pci_alloc_consistent(pdev, rx_ring->size, &rx_ring->dma); - if (!rxdr->desc) { + if (!rx_ring->desc) { DPRINTK(PROBE, ERR, "Memory allocation failed for the rx desc ring\n"); - vfree(rxdr->rx_buffer_info); + vfree(rx_ring->rx_buffer_info); goto alloc_failed; } - rxdr->next_to_clean = 0; - rxdr->next_to_use = 0; + rx_ring->next_to_clean = 0; + rx_ring->next_to_use = 0; return 0; alloc_failed: - vfree(rxdr->lro_mgr.lro_arr); - rxdr->lro_mgr.lro_arr = NULL; + vfree(rx_ring->lro_mgr.lro_arr); + rx_ring->lro_mgr.lro_arr = NULL; return -ENOMEM; } @@ -2585,7 +2692,7 @@ alloc_failed: * Free all transmit software resources **/ static void ixgbe_free_tx_resources(struct ixgbe_adapter *adapter, - struct ixgbe_ring *tx_ring) + struct ixgbe_ring *tx_ring) { struct pci_dev *pdev = adapter->pdev; @@ -3030,6 +3137,8 @@ static int ixgbe_tso(struct ixgbe_adapter *adapter, mss_l4len_idx |= (skb_shinfo(skb)->gso_size << IXGBE_ADVTXD_MSS_SHIFT); mss_l4len_idx |= (l4len << IXGBE_ADVTXD_L4LEN_SHIFT); + /* use index 1 for TSO */ + mss_l4len_idx |= (1 << IXGBE_ADVTXD_IDX_SHIFT); context_desc->mss_l4len_idx = cpu_to_le32(mss_l4len_idx); tx_buffer_info->time_stamp = jiffies; @@ -3102,6 +3211,7 @@ static bool ixgbe_tx_csum(struct ixgbe_adapter *adapter, } context_desc->type_tucmd_mlhl = cpu_to_le32(type_tucmd_mlhl); + /* use index zero for tx checksum offload */ context_desc->mss_l4len_idx = 0; tx_buffer_info->time_stamp = jiffies; @@ -3210,6 +3320,8 @@ static void ixgbe_tx_queue(struct ixgbe_adapter *adapter, olinfo_status |= IXGBE_TXD_POPTS_TXSM << IXGBE_ADVTXD_POPTS_SHIFT; + /* use index 1 context for tso */ + olinfo_status |= (1 << IXGBE_ADVTXD_IDX_SHIFT); if (tx_flags & IXGBE_TX_FLAGS_IPV4) olinfo_status |= IXGBE_TXD_POPTS_IXSM << IXGBE_ADVTXD_POPTS_SHIFT; @@ -3516,7 +3628,8 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev, netdev->stop = &ixgbe_close; netdev->hard_start_xmit = &ixgbe_xmit_frame; netdev->get_stats = &ixgbe_get_stats; - netdev->set_multicast_list = &ixgbe_set_multi; + netdev->set_rx_mode = &ixgbe_set_rx_mode; + netdev->set_multicast_list = &ixgbe_set_rx_mode; netdev->set_mac_address = &ixgbe_set_mac; netdev->change_mtu = &ixgbe_change_mtu; ixgbe_set_ethtool_ops(netdev); @@ -3556,18 +3669,19 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev, goto err_sw_init; netdev->features = NETIF_F_SG | - NETIF_F_HW_CSUM | + NETIF_F_IP_CSUM | NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX | NETIF_F_HW_VLAN_FILTER; - netdev->features |= NETIF_F_LRO; + netdev->features |= NETIF_F_IPV6_CSUM; netdev->features |= NETIF_F_TSO; netdev->features |= NETIF_F_TSO6; + netdev->features |= NETIF_F_LRO; netdev->vlan_features |= NETIF_F_TSO; netdev->vlan_features |= NETIF_F_TSO6; - netdev->vlan_features |= NETIF_F_HW_CSUM; + netdev->vlan_features |= NETIF_F_IP_CSUM; netdev->vlan_features |= NETIF_F_SG; if (pci_using_dac) @@ -3594,13 +3708,6 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev, INIT_WORK(&adapter->reset_task, ixgbe_reset_task); - /* initialize default flow control settings */ - hw->fc.original_type = ixgbe_fc_full; - hw->fc.type = ixgbe_fc_full; - hw->fc.high_water = IXGBE_DEFAULT_FCRTH; - hw->fc.low_water = IXGBE_DEFAULT_FCRTL; - hw->fc.pause_time = IXGBE_DEFAULT_FCPAUSE; - err = ixgbe_init_interrupt_scheme(adapter); if (err) goto err_sw_init; @@ -3647,7 +3754,7 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev, if (err) goto err_register; -#ifdef CONFIG_DCA +#if defined(CONFIG_DCA) || defined (CONFIG_DCA_MODULE) if (dca_add_requester(&pdev->dev) == 0) { adapter->flags |= IXGBE_FLAG_DCA_ENABLED; /* always use CB2 mode, difference is masked @@ -3697,7 +3804,7 @@ static void __devexit ixgbe_remove(struct pci_dev *pdev) flush_scheduled_work(); -#ifdef CONFIG_DCA +#if defined(CONFIG_DCA) || defined (CONFIG_DCA_MODULE) if (adapter->flags & IXGBE_FLAG_DCA_ENABLED) { adapter->flags &= ~IXGBE_FLAG_DCA_ENABLED; dca_remove_requester(&pdev->dev); @@ -3830,7 +3937,7 @@ static int __init ixgbe_init_module(void) printk(KERN_INFO "%s: %s\n", ixgbe_driver_name, ixgbe_copyright); -#ifdef CONFIG_DCA +#if defined(CONFIG_DCA) || defined (CONFIG_DCA_MODULE) dca_register_notify(&dca_notifier); #endif @@ -3847,13 +3954,13 @@ module_init(ixgbe_init_module); **/ static void __exit ixgbe_exit_module(void) { -#ifdef CONFIG_DCA +#if defined(CONFIG_DCA) || defined (CONFIG_DCA_MODULE) dca_unregister_notify(&dca_notifier); #endif pci_unregister_driver(&ixgbe_driver); } -#ifdef CONFIG_DCA +#if defined(CONFIG_DCA) || defined (CONFIG_DCA_MODULE) static int ixgbe_notify_dca(struct notifier_block *nb, unsigned long event, void *p) { @@ -3864,7 +3971,7 @@ static int ixgbe_notify_dca(struct notifier_block *nb, unsigned long event, return ret_val ? NOTIFY_BAD : NOTIFY_DONE; } -#endif /* CONFIG_DCA */ +#endif /* CONFIG_DCA or CONFIG_DCA_MODULE */ module_exit(ixgbe_exit_module); diff --git a/drivers/net/ixgbe/ixgbe_type.h b/drivers/net/ixgbe/ixgbe_type.h index c0282a223df..3e9c483ad8e 100644 --- a/drivers/net/ixgbe/ixgbe_type.h +++ b/drivers/net/ixgbe/ixgbe_type.h @@ -356,12 +356,10 @@ #define IXGBE_ANLP2 0x042B4 #define IXGBE_ATLASCTL 0x04800 -/* RSCCTL Bit Masks */ -#define IXGBE_RSCCTL_RSCEN 0x01 -#define IXGBE_RSCCTL_MAXDESC_1 0x00 -#define IXGBE_RSCCTL_MAXDESC_4 0x04 -#define IXGBE_RSCCTL_MAXDESC_8 0x08 -#define IXGBE_RSCCTL_MAXDESC_16 0x0C +/* RDRXCTL Bit Masks */ +#define IXGBE_RDRXCTL_RDMTS_1_2 0x00000000 /* Rx Desc Min Threshold Size */ +#define IXGBE_RDRXCTL_MVMEN 0x00000020 +#define IXGBE_RDRXCTL_DMAIDONE 0x00000008 /* DMA init cycle done */ /* CTRL Bit Masks */ #define IXGBE_CTRL_GIO_DIS 0x00000004 /* Global IO Master Disable bit */ @@ -822,10 +820,6 @@ #define IXGBE_RAH_VIND_SHIFT 18 #define IXGBE_RAH_AV 0x80000000 -/* Filters */ -#define IXGBE_MC_TBL_SIZE 128 /* Multicast Filter Table (4096 bits) */ -#define IXGBE_VLAN_FILTER_TBL_SIZE 128 /* VLAN Filter Table (4096 bits) */ - /* Header split receive */ #define IXGBE_RFCTL_ISCSI_DIS 0x00000001 #define IXGBE_RFCTL_ISCSI_DWC_MASK 0x0000003E @@ -1007,15 +1001,15 @@ struct ixgbe_legacy_tx_desc { __le32 data; struct { __le16 length; /* Data buffer length */ - u8 cso; /* Checksum offset */ - u8 cmd; /* Descriptor control */ + u8 cso; /* Checksum offset */ + u8 cmd; /* Descriptor control */ } flags; } lower; union { __le32 data; struct { u8 status; /* Descriptor status */ - u8 css; /* Checksum start */ + u8 css; /* Checksum start */ __le16 vlan; } fields; } upper; @@ -1039,9 +1033,9 @@ union ixgbe_adv_tx_desc { struct ixgbe_legacy_rx_desc { __le64 buffer_addr; /* Address of the descriptor's data buffer */ __le16 length; /* Length of data DMAed into data buffer */ - u16 csum; /* Packet checksum */ - u8 status; /* Descriptor status */ - u8 errors; /* Descriptor Errors */ + __le16 csum; /* Packet checksum */ + u8 status; /* Descriptor status */ + u8 errors; /* Descriptor Errors */ __le16 vlan; }; @@ -1053,15 +1047,18 @@ union ixgbe_adv_rx_desc { } read; struct { struct { - struct { - __le16 pkt_info; /* RSS type, Packet type */ - __le16 hdr_info; /* Split Header, header len */ + union { + __le32 data; + struct { + __le16 pkt_info; /* RSS type, Packet type */ + __le16 hdr_info; /* Split Header, header len */ + } hs_rss; } lo_dword; union { __le32 rss; /* RSS Hash */ struct { __le16 ip_id; /* IP id */ - u16 csum; /* Packet Checksum */ + __le16 csum; /* Packet Checksum */ } csum_ip; } hi_dword; } lower; @@ -1167,6 +1164,8 @@ struct ixgbe_addr_filter_info { u32 rar_used_count; u32 mc_addr_in_rar_count; u32 mta_in_use; + u32 overflow_promisc; + bool user_set_promisc; }; /* Flow control parameters */ @@ -1242,6 +1241,10 @@ struct ixgbe_hw_stats { /* forward declaration */ struct ixgbe_hw; +/* iterator type for walking multicast address lists */ +typedef u8* (*ixgbe_mc_addr_itr) (struct ixgbe_hw *hw, u8 **mc_addr_ptr, + u32 *vmdq); + struct ixgbe_mac_operations { s32 (*reset)(struct ixgbe_hw *); enum ixgbe_media_type (*get_media_type)(struct ixgbe_hw *); @@ -1263,9 +1266,11 @@ struct ixgbe_mac_info { u8 addr[IXGBE_ETH_LENGTH_OF_ADDRESS]; u8 perm_addr[IXGBE_ETH_LENGTH_OF_ADDRESS]; s32 mc_filter_type; + u32 mcft_size; + u32 vft_size; + u32 num_rar_entries; u32 num_rx_queues; u32 num_tx_queues; - u32 num_rx_addrs; u32 link_attach_type; u32 link_mode_select; bool link_settings_loaded; diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c index 0f6f9747d25..1822491f19c 100644 --- a/drivers/net/r8169.c +++ b/drivers/net/r8169.c @@ -61,6 +61,7 @@ static const int multicast_filter_limit = 32; /* MAC address length */ #define MAC_ADDR_LEN 6 +#define MAX_READ_REQUEST_SHIFT 12 #define RX_FIFO_THRESH 7 /* 7 means NO threshold, Rx buffer level before first PCI xfer. */ #define RX_DMA_BURST 6 /* Maximum PCI burst, '6' is 1024 */ #define TX_DMA_BURST 6 /* Maximum PCI burst, '6' is 1024 */ @@ -95,6 +96,10 @@ enum mac_version { RTL_GIGA_MAC_VER_04 = 0x04, // 8169SB RTL_GIGA_MAC_VER_05 = 0x05, // 8110SCd RTL_GIGA_MAC_VER_06 = 0x06, // 8110SCe + RTL_GIGA_MAC_VER_07 = 0x07, // 8102e + RTL_GIGA_MAC_VER_08 = 0x08, // 8102e + RTL_GIGA_MAC_VER_09 = 0x09, // 8102e + RTL_GIGA_MAC_VER_10 = 0x0a, // 8101e RTL_GIGA_MAC_VER_11 = 0x0b, // 8168Bb RTL_GIGA_MAC_VER_12 = 0x0c, // 8168Be RTL_GIGA_MAC_VER_13 = 0x0d, // 8101Eb @@ -121,6 +126,10 @@ static const struct { _R("RTL8169sb/8110sb", RTL_GIGA_MAC_VER_04, 0xff7e1880), // 8169SB _R("RTL8169sc/8110sc", RTL_GIGA_MAC_VER_05, 0xff7e1880), // 8110SCd _R("RTL8169sc/8110sc", RTL_GIGA_MAC_VER_06, 0xff7e1880), // 8110SCe + _R("RTL8102e", RTL_GIGA_MAC_VER_07, 0xff7e1880), // PCI-E + _R("RTL8102e", RTL_GIGA_MAC_VER_08, 0xff7e1880), // PCI-E + _R("RTL8102e", RTL_GIGA_MAC_VER_09, 0xff7e1880), // PCI-E + _R("RTL8101e", RTL_GIGA_MAC_VER_10, 0xff7e1880), // PCI-E _R("RTL8168b/8111b", RTL_GIGA_MAC_VER_11, 0xff7e1880), // PCI-E _R("RTL8168b/8111b", RTL_GIGA_MAC_VER_12, 0xff7e1880), // PCI-E _R("RTL8101e", RTL_GIGA_MAC_VER_13, 0xff7e1880), // PCI-E 8139 @@ -196,9 +205,6 @@ enum rtl_registers { Config5 = 0x56, MultiIntr = 0x5c, PHYAR = 0x60, - TBICSR = 0x64, - TBI_ANAR = 0x68, - TBI_LPAR = 0x6a, PHYstatus = 0x6c, RxMaxSize = 0xda, CPlusCmd = 0xe0, @@ -212,6 +218,32 @@ enum rtl_registers { FuncForceEvent = 0xfc, }; +enum rtl8110_registers { + TBICSR = 0x64, + TBI_ANAR = 0x68, + TBI_LPAR = 0x6a, +}; + +enum rtl8168_8101_registers { + CSIDR = 0x64, + CSIAR = 0x68, +#define CSIAR_FLAG 0x80000000 +#define CSIAR_WRITE_CMD 0x80000000 +#define CSIAR_BYTE_ENABLE 0x0f +#define CSIAR_BYTE_ENABLE_SHIFT 12 +#define CSIAR_ADDR_MASK 0x0fff + + EPHYAR = 0x80, +#define EPHYAR_FLAG 0x80000000 +#define EPHYAR_WRITE_CMD 0x80000000 +#define EPHYAR_REG_MASK 0x1f +#define EPHYAR_REG_SHIFT 16 +#define EPHYAR_DATA_MASK 0xffff + DBG_REG = 0xd1, +#define FIX_NAK_1 (1 << 4) +#define FIX_NAK_2 (1 << 3) +}; + enum rtl_register_content { /* InterruptStatusBits */ SYSErr = 0x8000, @@ -265,7 +297,13 @@ enum rtl_register_content { TxDMAShift = 8, /* DMA burst value (0-7) is shift this many bits */ /* Config1 register p.24 */ + LEDS1 = (1 << 7), + LEDS0 = (1 << 6), MSIEnable = (1 << 5), /* Enable Message Signaled Interrupt */ + Speed_down = (1 << 4), + MEMMAP = (1 << 3), + IOMAP = (1 << 2), + VPD = (1 << 1), PMEnable = (1 << 0), /* Power Management Enable */ /* Config2 register p. 25 */ @@ -275,6 +313,7 @@ enum rtl_register_content { /* Config3 register p.25 */ MagicPacket = (1 << 5), /* Wake up when receives a Magic Packet */ LinkUp = (1 << 4), /* Wake up when the cable connection is re-established */ + Beacon_en = (1 << 0), /* 8168 only. Reserved in the 8168b */ /* Config5 register p.27 */ BWF = (1 << 6), /* Accept Broadcast wakeup frame */ @@ -292,7 +331,16 @@ enum rtl_register_content { TBINwComplete = 0x01000000, /* CPlusCmd p.31 */ - PktCntrDisable = (1 << 7), // 8168 + EnableBist = (1 << 15), // 8168 8101 + Mac_dbgo_oe = (1 << 14), // 8168 8101 + Normal_mode = (1 << 13), // unused + Force_half_dup = (1 << 12), // 8168 8101 + Force_rxflow_en = (1 << 11), // 8168 8101 + Force_txflow_en = (1 << 10), // 8168 8101 + Cxpl_dbg_sel = (1 << 9), // 8168 8101 + ASF = (1 << 8), // 8168 8101 + PktCntrDisable = (1 << 7), // 8168 8101 + Mac_dbgo_sel = 0x001c, // 8168 RxVlan = (1 << 6), RxChkSum = (1 << 5), PCIDAC = (1 << 4), @@ -370,8 +418,9 @@ struct ring_info { }; enum features { - RTL_FEATURE_WOL = (1 << 0), - RTL_FEATURE_MSI = (1 << 1), + RTL_FEATURE_WOL = (1 << 0), + RTL_FEATURE_MSI = (1 << 1), + RTL_FEATURE_GMII = (1 << 2), }; struct rtl8169_private { @@ -406,13 +455,16 @@ struct rtl8169_private { struct vlan_group *vlgrp; #endif int (*set_speed)(struct net_device *, u8 autoneg, u16 speed, u8 duplex); - void (*get_settings)(struct net_device *, struct ethtool_cmd *); + int (*get_settings)(struct net_device *, struct ethtool_cmd *); void (*phy_reset_enable)(void __iomem *); void (*hw_start)(struct net_device *); unsigned int (*phy_reset_pending)(void __iomem *); unsigned int (*link_ok)(void __iomem *); + int pcie_cap; struct delayed_work task; unsigned features; + + struct mii_if_info mii; }; MODULE_AUTHOR("Realtek and the Linux r8169 crew <netdev@vger.kernel.org>"); @@ -482,6 +534,94 @@ static int mdio_read(void __iomem *ioaddr, int reg_addr) return value; } +static void mdio_patch(void __iomem *ioaddr, int reg_addr, int value) +{ + mdio_write(ioaddr, reg_addr, mdio_read(ioaddr, reg_addr) | value); +} + +static void rtl_mdio_write(struct net_device *dev, int phy_id, int location, + int val) +{ + struct rtl8169_private *tp = netdev_priv(dev); + void __iomem *ioaddr = tp->mmio_addr; + + mdio_write(ioaddr, location, val); +} + +static int rtl_mdio_read(struct net_device *dev, int phy_id, int location) +{ + struct rtl8169_private *tp = netdev_priv(dev); + void __iomem *ioaddr = tp->mmio_addr; + + return mdio_read(ioaddr, location); +} + +static void rtl_ephy_write(void __iomem *ioaddr, int reg_addr, int value) +{ + unsigned int i; + + RTL_W32(EPHYAR, EPHYAR_WRITE_CMD | (value & EPHYAR_DATA_MASK) | + (reg_addr & EPHYAR_REG_MASK) << EPHYAR_REG_SHIFT); + + for (i = 0; i < 100; i++) { + if (!(RTL_R32(EPHYAR) & EPHYAR_FLAG)) + break; + udelay(10); + } +} + +static u16 rtl_ephy_read(void __iomem *ioaddr, int reg_addr) +{ + u16 value = 0xffff; + unsigned int i; + + RTL_W32(EPHYAR, (reg_addr & EPHYAR_REG_MASK) << EPHYAR_REG_SHIFT); + + for (i = 0; i < 100; i++) { + if (RTL_R32(EPHYAR) & EPHYAR_FLAG) { + value = RTL_R32(EPHYAR) & EPHYAR_DATA_MASK; + break; + } + udelay(10); + } + + return value; +} + +static void rtl_csi_write(void __iomem *ioaddr, int addr, int value) +{ + unsigned int i; + + RTL_W32(CSIDR, value); + RTL_W32(CSIAR, CSIAR_WRITE_CMD | (addr & CSIAR_ADDR_MASK) | + CSIAR_BYTE_ENABLE << CSIAR_BYTE_ENABLE_SHIFT); + + for (i = 0; i < 100; i++) { + if (!(RTL_R32(CSIAR) & CSIAR_FLAG)) + break; + udelay(10); + } +} + +static u32 rtl_csi_read(void __iomem *ioaddr, int addr) +{ + u32 value = ~0x00; + unsigned int i; + + RTL_W32(CSIAR, (addr & CSIAR_ADDR_MASK) | + CSIAR_BYTE_ENABLE << CSIAR_BYTE_ENABLE_SHIFT); + + for (i = 0; i < 100; i++) { + if (RTL_R32(CSIAR) & CSIAR_FLAG) { + value = RTL_R32(CSIDR); + break; + } + udelay(10); + } + + return value; +} + static void rtl8169_irq_mask_and_ack(void __iomem *ioaddr) { RTL_W16(IntrMask, 0x0000); @@ -705,8 +845,12 @@ static int rtl8169_set_speed_xmii(struct net_device *dev, } } - /* The 8100e/8101e do Fast Ethernet only. */ - if ((tp->mac_version == RTL_GIGA_MAC_VER_13) || + /* The 8100e/8101e/8102e do Fast Ethernet only. */ + if ((tp->mac_version == RTL_GIGA_MAC_VER_07) || + (tp->mac_version == RTL_GIGA_MAC_VER_08) || + (tp->mac_version == RTL_GIGA_MAC_VER_09) || + (tp->mac_version == RTL_GIGA_MAC_VER_10) || + (tp->mac_version == RTL_GIGA_MAC_VER_13) || (tp->mac_version == RTL_GIGA_MAC_VER_14) || (tp->mac_version == RTL_GIGA_MAC_VER_15) || (tp->mac_version == RTL_GIGA_MAC_VER_16)) { @@ -850,7 +994,7 @@ static int rtl8169_rx_vlan_skb(struct rtl8169_private *tp, struct RxDesc *desc, #endif -static void rtl8169_gset_tbi(struct net_device *dev, struct ethtool_cmd *cmd) +static int rtl8169_gset_tbi(struct net_device *dev, struct ethtool_cmd *cmd) { struct rtl8169_private *tp = netdev_priv(dev); void __iomem *ioaddr = tp->mmio_addr; @@ -867,65 +1011,29 @@ static void rtl8169_gset_tbi(struct net_device *dev, struct ethtool_cmd *cmd) cmd->speed = SPEED_1000; cmd->duplex = DUPLEX_FULL; /* Always set */ + + return 0; } -static void rtl8169_gset_xmii(struct net_device *dev, struct ethtool_cmd *cmd) +static int rtl8169_gset_xmii(struct net_device *dev, struct ethtool_cmd *cmd) { struct rtl8169_private *tp = netdev_priv(dev); - void __iomem *ioaddr = tp->mmio_addr; - u8 status; - - cmd->supported = SUPPORTED_10baseT_Half | - SUPPORTED_10baseT_Full | - SUPPORTED_100baseT_Half | - SUPPORTED_100baseT_Full | - SUPPORTED_1000baseT_Full | - SUPPORTED_Autoneg | - SUPPORTED_TP; - - cmd->autoneg = 1; - cmd->advertising = ADVERTISED_TP | ADVERTISED_Autoneg; - - if (tp->phy_auto_nego_reg & ADVERTISE_10HALF) - cmd->advertising |= ADVERTISED_10baseT_Half; - if (tp->phy_auto_nego_reg & ADVERTISE_10FULL) - cmd->advertising |= ADVERTISED_10baseT_Full; - if (tp->phy_auto_nego_reg & ADVERTISE_100HALF) - cmd->advertising |= ADVERTISED_100baseT_Half; - if (tp->phy_auto_nego_reg & ADVERTISE_100FULL) - cmd->advertising |= ADVERTISED_100baseT_Full; - if (tp->phy_1000_ctrl_reg & ADVERTISE_1000FULL) - cmd->advertising |= ADVERTISED_1000baseT_Full; - - status = RTL_R8(PHYstatus); - - if (status & _1000bpsF) - cmd->speed = SPEED_1000; - else if (status & _100bps) - cmd->speed = SPEED_100; - else if (status & _10bps) - cmd->speed = SPEED_10; - - if (status & TxFlowCtrl) - cmd->advertising |= ADVERTISED_Asym_Pause; - if (status & RxFlowCtrl) - cmd->advertising |= ADVERTISED_Pause; - - cmd->duplex = ((status & _1000bpsF) || (status & FullDup)) ? - DUPLEX_FULL : DUPLEX_HALF; + + return mii_ethtool_gset(&tp->mii, cmd); } static int rtl8169_get_settings(struct net_device *dev, struct ethtool_cmd *cmd) { struct rtl8169_private *tp = netdev_priv(dev); unsigned long flags; + int rc; spin_lock_irqsave(&tp->lock, flags); - tp->get_settings(dev, cmd); + rc = tp->get_settings(dev, cmd); spin_unlock_irqrestore(&tp->lock, flags); - return 0; + return rc; } static void rtl8169_get_regs(struct net_device *dev, struct ethtool_regs *regs, @@ -1116,8 +1224,17 @@ static void rtl8169_get_mac_version(struct rtl8169_private *tp, { 0x7c800000, 0x30000000, RTL_GIGA_MAC_VER_11 }, /* 8101 family. */ + { 0x7cf00000, 0x34a00000, RTL_GIGA_MAC_VER_09 }, + { 0x7cf00000, 0x24a00000, RTL_GIGA_MAC_VER_09 }, + { 0x7cf00000, 0x34900000, RTL_GIGA_MAC_VER_08 }, + { 0x7cf00000, 0x24900000, RTL_GIGA_MAC_VER_08 }, + { 0x7cf00000, 0x34800000, RTL_GIGA_MAC_VER_07 }, + { 0x7cf00000, 0x24800000, RTL_GIGA_MAC_VER_07 }, { 0x7cf00000, 0x34000000, RTL_GIGA_MAC_VER_13 }, + { 0x7cf00000, 0x34300000, RTL_GIGA_MAC_VER_10 }, { 0x7cf00000, 0x34200000, RTL_GIGA_MAC_VER_16 }, + { 0x7c800000, 0x34800000, RTL_GIGA_MAC_VER_09 }, + { 0x7c800000, 0x24800000, RTL_GIGA_MAC_VER_09 }, { 0x7c800000, 0x34000000, RTL_GIGA_MAC_VER_16 }, /* FIXME: where did these entries come from ? -- FR */ { 0xfc800000, 0x38800000, RTL_GIGA_MAC_VER_15 }, @@ -1279,6 +1396,22 @@ static void rtl8168cx_hw_phy_config(void __iomem *ioaddr) rtl_phy_write(ioaddr, phy_reg_init, ARRAY_SIZE(phy_reg_init)); } +static void rtl8102e_hw_phy_config(void __iomem *ioaddr) +{ + struct phy_reg phy_reg_init[] = { + { 0x1f, 0x0003 }, + { 0x08, 0x441d }, + { 0x01, 0x9100 }, + { 0x1f, 0x0000 } + }; + + mdio_write(ioaddr, 0x1f, 0x0000); + mdio_patch(ioaddr, 0x11, 1 << 12); + mdio_patch(ioaddr, 0x19, 1 << 13); + + rtl_phy_write(ioaddr, phy_reg_init, ARRAY_SIZE(phy_reg_init)); +} + static void rtl_hw_phy_config(struct net_device *dev) { struct rtl8169_private *tp = netdev_priv(dev); @@ -1296,6 +1429,11 @@ static void rtl_hw_phy_config(struct net_device *dev) case RTL_GIGA_MAC_VER_04: rtl8169sb_hw_phy_config(ioaddr); break; + case RTL_GIGA_MAC_VER_07: + case RTL_GIGA_MAC_VER_08: + case RTL_GIGA_MAC_VER_09: + rtl8102e_hw_phy_config(ioaddr); + break; case RTL_GIGA_MAC_VER_18: rtl8168cp_hw_phy_config(ioaddr); break; @@ -1513,7 +1651,7 @@ static const struct rtl_cfg_info { unsigned int align; u16 intr_event; u16 napi_event; - unsigned msi; + unsigned features; } rtl_cfg_infos [] = { [RTL_CFG_0] = { .hw_start = rtl_hw_start_8169, @@ -1522,7 +1660,7 @@ static const struct rtl_cfg_info { .intr_event = SYSErr | LinkChg | RxOverflow | RxFIFOOver | TxErr | TxOK | RxOK | RxErr, .napi_event = RxFIFOOver | TxErr | TxOK | RxOK | RxOverflow, - .msi = 0 + .features = RTL_FEATURE_GMII }, [RTL_CFG_1] = { .hw_start = rtl_hw_start_8168, @@ -1531,7 +1669,7 @@ static const struct rtl_cfg_info { .intr_event = SYSErr | LinkChg | RxOverflow | TxErr | TxOK | RxOK | RxErr, .napi_event = TxErr | TxOK | RxOK | RxOverflow, - .msi = RTL_FEATURE_MSI + .features = RTL_FEATURE_GMII | RTL_FEATURE_MSI }, [RTL_CFG_2] = { .hw_start = rtl_hw_start_8101, @@ -1540,7 +1678,7 @@ static const struct rtl_cfg_info { .intr_event = SYSErr | LinkChg | RxOverflow | PCSTimeout | RxFIFOOver | TxErr | TxOK | RxOK | RxErr, .napi_event = RxFIFOOver | TxErr | TxOK | RxOK | RxOverflow, - .msi = RTL_FEATURE_MSI + .features = RTL_FEATURE_MSI } }; @@ -1552,7 +1690,7 @@ static unsigned rtl_try_msi(struct pci_dev *pdev, void __iomem *ioaddr, u8 cfg2; cfg2 = RTL_R8(Config2) & ~MSIEnable; - if (cfg->msi) { + if (cfg->features & RTL_FEATURE_MSI) { if (pci_enable_msi(pdev)) { dev_info(&pdev->dev, "no MSI. Back to INTx.\n"); } else { @@ -1578,6 +1716,7 @@ rtl8169_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) const struct rtl_cfg_info *cfg = rtl_cfg_infos + ent->driver_data; const unsigned int region = cfg->region; struct rtl8169_private *tp; + struct mii_if_info *mii; struct net_device *dev; void __iomem *ioaddr; unsigned int i; @@ -1602,6 +1741,14 @@ rtl8169_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) tp->pci_dev = pdev; tp->msg_enable = netif_msg_init(debug.msg_enable, R8169_MSG_DEFAULT); + mii = &tp->mii; + mii->dev = dev; + mii->mdio_read = rtl_mdio_read; + mii->mdio_write = rtl_mdio_write; + mii->phy_id_mask = 0x1f; + mii->reg_num_mask = 0x1f; + mii->supports_gmii = !!(cfg->features & RTL_FEATURE_GMII); + /* enable device (incl. PCI PM wakeup and hotplug setup) */ rc = pci_enable_device(pdev); if (rc < 0) { @@ -1670,6 +1817,10 @@ rtl8169_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) goto err_out_free_res_4; } + tp->pcie_cap = pci_find_capability(pdev, PCI_CAP_ID_EXP); + if (!tp->pcie_cap && netif_msg_probe(tp)) + dev_info(&pdev->dev, "no PCI Express capability\n"); + /* Unneeded ? Don't mess with Mrs. Murphy. */ rtl8169_irq_mask_and_ack(ioaddr); @@ -2061,12 +2212,51 @@ static void rtl_hw_start_8169(struct net_device *dev) RTL_W16(IntrMask, tp->intr_event); } +static void rtl_tx_performance_tweak(struct pci_dev *pdev, u16 force) +{ + struct net_device *dev = pci_get_drvdata(pdev); + struct rtl8169_private *tp = netdev_priv(dev); + int cap = tp->pcie_cap; + + if (cap) { + u16 ctl; + + pci_read_config_word(pdev, cap + PCI_EXP_DEVCTL, &ctl); + ctl = (ctl & ~PCI_EXP_DEVCTL_READRQ) | force; + pci_write_config_word(pdev, cap + PCI_EXP_DEVCTL, ctl); + } +} + +static void rtl_csi_access_enable(void __iomem *ioaddr) +{ + u32 csi; + + csi = rtl_csi_read(ioaddr, 0x070c) & 0x00ffffff; + rtl_csi_write(ioaddr, 0x070c, csi | 0x27000000); +} + +struct ephy_info { + unsigned int offset; + u16 mask; + u16 bits; +}; + +static void rtl_ephy_init(void __iomem *ioaddr, struct ephy_info *e, int len) +{ + u16 w; + + while (len-- > 0) { + w = (rtl_ephy_read(ioaddr, e->offset) & ~e->mask) | e->bits; + rtl_ephy_write(ioaddr, e->offset, w); + e++; + } +} + static void rtl_hw_start_8168(struct net_device *dev) { struct rtl8169_private *tp = netdev_priv(dev); void __iomem *ioaddr = tp->mmio_addr; struct pci_dev *pdev = tp->pci_dev; - u8 ctl; RTL_W8(Cfg9346, Cfg9346_Unlock); @@ -2080,10 +2270,7 @@ static void rtl_hw_start_8168(struct net_device *dev) RTL_W16(CPlusCmd, tp->cp_cmd); - /* Tx performance tweak. */ - pci_read_config_byte(pdev, 0x69, &ctl); - ctl = (ctl & ~0x70) | 0x50; - pci_write_config_byte(pdev, 0x69, ctl); + rtl_tx_performance_tweak(pdev, 0x5 << MAX_READ_REQUEST_SHIFT); RTL_W16(IntrMitigate, 0x5151); @@ -2110,6 +2297,70 @@ static void rtl_hw_start_8168(struct net_device *dev) RTL_W16(IntrMask, tp->intr_event); } +#define R810X_CPCMD_QUIRK_MASK (\ + EnableBist | \ + Mac_dbgo_oe | \ + Force_half_dup | \ + Force_half_dup | \ + Force_txflow_en | \ + Cxpl_dbg_sel | \ + ASF | \ + PktCntrDisable | \ + PCIDAC | \ + PCIMulRW) + +static void rtl_hw_start_8102e_1(void __iomem *ioaddr, struct pci_dev *pdev) +{ + static struct ephy_info e_info_8102e_1[] = { + { 0x01, 0, 0x6e65 }, + { 0x02, 0, 0x091f }, + { 0x03, 0, 0xc2f9 }, + { 0x06, 0, 0xafb5 }, + { 0x07, 0, 0x0e00 }, + { 0x19, 0, 0xec80 }, + { 0x01, 0, 0x2e65 }, + { 0x01, 0, 0x6e65 } + }; + u8 cfg1; + + rtl_csi_access_enable(ioaddr); + + RTL_W8(DBG_REG, FIX_NAK_1); + + rtl_tx_performance_tweak(pdev, 0x5 << MAX_READ_REQUEST_SHIFT); + + RTL_W8(Config1, + LEDS1 | LEDS0 | Speed_down | MEMMAP | IOMAP | VPD | PMEnable); + RTL_W8(Config3, RTL_R8(Config3) & ~Beacon_en); + + cfg1 = RTL_R8(Config1); + if ((cfg1 & LEDS0) && (cfg1 & LEDS1)) + RTL_W8(Config1, cfg1 & ~LEDS0); + + RTL_W16(CPlusCmd, RTL_R16(CPlusCmd) & ~R810X_CPCMD_QUIRK_MASK); + + rtl_ephy_init(ioaddr, e_info_8102e_1, ARRAY_SIZE(e_info_8102e_1)); +} + +static void rtl_hw_start_8102e_2(void __iomem *ioaddr, struct pci_dev *pdev) +{ + rtl_csi_access_enable(ioaddr); + + rtl_tx_performance_tweak(pdev, 0x5 << MAX_READ_REQUEST_SHIFT); + + RTL_W8(Config1, MEMMAP | IOMAP | VPD | PMEnable); + RTL_W8(Config3, RTL_R8(Config3) & ~Beacon_en); + + RTL_W16(CPlusCmd, RTL_R16(CPlusCmd) & ~R810X_CPCMD_QUIRK_MASK); +} + +static void rtl_hw_start_8102e_3(void __iomem *ioaddr, struct pci_dev *pdev) +{ + rtl_hw_start_8102e_2(ioaddr, pdev); + + rtl_ephy_write(ioaddr, 0x03, 0xc2f9); +} + static void rtl_hw_start_8101(struct net_device *dev) { struct rtl8169_private *tp = netdev_priv(dev); @@ -2118,8 +2369,26 @@ static void rtl_hw_start_8101(struct net_device *dev) if ((tp->mac_version == RTL_GIGA_MAC_VER_13) || (tp->mac_version == RTL_GIGA_MAC_VER_16)) { - pci_write_config_word(pdev, 0x68, 0x00); - pci_write_config_word(pdev, 0x69, 0x08); + int cap = tp->pcie_cap; + + if (cap) { + pci_write_config_word(pdev, cap + PCI_EXP_DEVCTL, + PCI_EXP_DEVCTL_NOSNOOP_EN); + } + } + + switch (tp->mac_version) { + case RTL_GIGA_MAC_VER_07: + rtl_hw_start_8102e_1(ioaddr, pdev); + break; + + case RTL_GIGA_MAC_VER_08: + rtl_hw_start_8102e_3(ioaddr, pdev); + break; + + case RTL_GIGA_MAC_VER_09: + rtl_hw_start_8102e_2(ioaddr, pdev); + break; } RTL_W8(Cfg9346, Cfg9346_Unlock); diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c index a2b073097e5..243db33042a 100644 --- a/drivers/net/s2io.c +++ b/drivers/net/s2io.c @@ -8175,8 +8175,8 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre) break; } if (sp->config.multiq) { - for (i = 0; i < sp->config.tx_fifo_num; i++) - mac_control->fifos[i].multiq = config->multiq; + for (i = 0; i < sp->config.tx_fifo_num; i++) + mac_control->fifos[i].multiq = config->multiq; DBG_PRINT(ERR_DBG, "%s: Multiqueue support enabled\n", dev->name); } else diff --git a/drivers/net/sfc/bitfield.h b/drivers/net/sfc/bitfield.h index 2c79d27404e..d95c2182801 100644 --- a/drivers/net/sfc/bitfield.h +++ b/drivers/net/sfc/bitfield.h @@ -52,9 +52,9 @@ * * The maximum width mask that can be generated is 64 bits. */ -#define EFX_MASK64(field) \ - (EFX_WIDTH(field) == 64 ? ~((u64) 0) : \ - (((((u64) 1) << EFX_WIDTH(field))) - 1)) +#define EFX_MASK64(width) \ + ((width) == 64 ? ~((u64) 0) : \ + (((((u64) 1) << (width))) - 1)) /* Mask equal in width to the specified field. * @@ -63,9 +63,9 @@ * The maximum width mask that can be generated is 32 bits. Use * EFX_MASK64 for higher width fields. */ -#define EFX_MASK32(field) \ - (EFX_WIDTH(field) == 32 ? ~((u32) 0) : \ - (((((u32) 1) << EFX_WIDTH(field))) - 1)) +#define EFX_MASK32(width) \ + ((width) == 32 ? ~((u32) 0) : \ + (((((u32) 1) << (width))) - 1)) /* A doubleword (i.e. 4 byte) datatype - little-endian in HW */ typedef union efx_dword { @@ -138,44 +138,49 @@ typedef union efx_oword { EFX_EXTRACT_NATIVE(le32_to_cpu(element), min, max, low, high) #define EFX_EXTRACT_OWORD64(oword, low, high) \ - (EFX_EXTRACT64((oword).u64[0], 0, 63, low, high) | \ - EFX_EXTRACT64((oword).u64[1], 64, 127, low, high)) + ((EFX_EXTRACT64((oword).u64[0], 0, 63, low, high) | \ + EFX_EXTRACT64((oword).u64[1], 64, 127, low, high)) & \ + EFX_MASK64(high + 1 - low)) #define EFX_EXTRACT_QWORD64(qword, low, high) \ - EFX_EXTRACT64((qword).u64[0], 0, 63, low, high) + (EFX_EXTRACT64((qword).u64[0], 0, 63, low, high) & \ + EFX_MASK64(high + 1 - low)) #define EFX_EXTRACT_OWORD32(oword, low, high) \ - (EFX_EXTRACT32((oword).u32[0], 0, 31, low, high) | \ - EFX_EXTRACT32((oword).u32[1], 32, 63, low, high) | \ - EFX_EXTRACT32((oword).u32[2], 64, 95, low, high) | \ - EFX_EXTRACT32((oword).u32[3], 96, 127, low, high)) + ((EFX_EXTRACT32((oword).u32[0], 0, 31, low, high) | \ + EFX_EXTRACT32((oword).u32[1], 32, 63, low, high) | \ + EFX_EXTRACT32((oword).u32[2], 64, 95, low, high) | \ + EFX_EXTRACT32((oword).u32[3], 96, 127, low, high)) & \ + EFX_MASK32(high + 1 - low)) #define EFX_EXTRACT_QWORD32(qword, low, high) \ - (EFX_EXTRACT32((qword).u32[0], 0, 31, low, high) | \ - EFX_EXTRACT32((qword).u32[1], 32, 63, low, high)) + ((EFX_EXTRACT32((qword).u32[0], 0, 31, low, high) | \ + EFX_EXTRACT32((qword).u32[1], 32, 63, low, high)) & \ + EFX_MASK32(high + 1 - low)) -#define EFX_EXTRACT_DWORD(dword, low, high) \ - EFX_EXTRACT32((dword).u32[0], 0, 31, low, high) +#define EFX_EXTRACT_DWORD(dword, low, high) \ + (EFX_EXTRACT32((dword).u32[0], 0, 31, low, high) & \ + EFX_MASK32(high + 1 - low)) -#define EFX_OWORD_FIELD64(oword, field) \ - (EFX_EXTRACT_OWORD64(oword, EFX_LOW_BIT(field), EFX_HIGH_BIT(field)) \ - & EFX_MASK64(field)) +#define EFX_OWORD_FIELD64(oword, field) \ + EFX_EXTRACT_OWORD64(oword, EFX_LOW_BIT(field), \ + EFX_HIGH_BIT(field)) -#define EFX_QWORD_FIELD64(qword, field) \ - (EFX_EXTRACT_QWORD64(qword, EFX_LOW_BIT(field), EFX_HIGH_BIT(field)) \ - & EFX_MASK64(field)) +#define EFX_QWORD_FIELD64(qword, field) \ + EFX_EXTRACT_QWORD64(qword, EFX_LOW_BIT(field), \ + EFX_HIGH_BIT(field)) -#define EFX_OWORD_FIELD32(oword, field) \ - (EFX_EXTRACT_OWORD32(oword, EFX_LOW_BIT(field), EFX_HIGH_BIT(field)) \ - & EFX_MASK32(field)) +#define EFX_OWORD_FIELD32(oword, field) \ + EFX_EXTRACT_OWORD32(oword, EFX_LOW_BIT(field), \ + EFX_HIGH_BIT(field)) -#define EFX_QWORD_FIELD32(qword, field) \ - (EFX_EXTRACT_QWORD32(qword, EFX_LOW_BIT(field), EFX_HIGH_BIT(field)) \ - & EFX_MASK32(field)) +#define EFX_QWORD_FIELD32(qword, field) \ + EFX_EXTRACT_QWORD32(qword, EFX_LOW_BIT(field), \ + EFX_HIGH_BIT(field)) -#define EFX_DWORD_FIELD(dword, field) \ - (EFX_EXTRACT_DWORD(dword, EFX_LOW_BIT(field), EFX_HIGH_BIT(field)) \ - & EFX_MASK32(field)) +#define EFX_DWORD_FIELD(dword, field) \ + EFX_EXTRACT_DWORD(dword, EFX_LOW_BIT(field), \ + EFX_HIGH_BIT(field)) #define EFX_OWORD_IS_ZERO64(oword) \ (((oword).u64[0] | (oword).u64[1]) == (__force __le64) 0) @@ -411,69 +416,102 @@ typedef union efx_oword { * for read-modify-write operations. * */ - #define EFX_INVERT_OWORD(oword) do { \ (oword).u64[0] = ~((oword).u64[0]); \ (oword).u64[1] = ~((oword).u64[1]); \ } while (0) -#define EFX_INSERT_FIELD64(...) \ - cpu_to_le64(EFX_INSERT_FIELD_NATIVE(__VA_ARGS__)) +#define EFX_AND_OWORD(oword, from, mask) \ + do { \ + (oword).u64[0] = (from).u64[0] & (mask).u64[0]; \ + (oword).u64[1] = (from).u64[1] & (mask).u64[1]; \ + } while (0) + +#define EFX_OR_OWORD(oword, from, mask) \ + do { \ + (oword).u64[0] = (from).u64[0] | (mask).u64[0]; \ + (oword).u64[1] = (from).u64[1] | (mask).u64[1]; \ + } while (0) -#define EFX_INSERT_FIELD32(...) \ - cpu_to_le32(EFX_INSERT_FIELD_NATIVE(__VA_ARGS__)) +#define EFX_INSERT64(min, max, low, high, value) \ + cpu_to_le64(EFX_INSERT_NATIVE(min, max, low, high, value)) -#define EFX_INPLACE_MASK64(min, max, field) \ - EFX_INSERT_FIELD64(min, max, field, EFX_MASK64(field)) +#define EFX_INSERT32(min, max, low, high, value) \ + cpu_to_le32(EFX_INSERT_NATIVE(min, max, low, high, value)) -#define EFX_INPLACE_MASK32(min, max, field) \ - EFX_INSERT_FIELD32(min, max, field, EFX_MASK32(field)) +#define EFX_INPLACE_MASK64(min, max, low, high) \ + EFX_INSERT64(min, max, low, high, EFX_MASK64(high + 1 - low)) -#define EFX_SET_OWORD_FIELD64(oword, field, value) do { \ +#define EFX_INPLACE_MASK32(min, max, low, high) \ + EFX_INSERT32(min, max, low, high, EFX_MASK32(high + 1 - low)) + +#define EFX_SET_OWORD64(oword, low, high, value) do { \ (oword).u64[0] = (((oword).u64[0] \ - & ~EFX_INPLACE_MASK64(0, 63, field)) \ - | EFX_INSERT_FIELD64(0, 63, field, value)); \ + & ~EFX_INPLACE_MASK64(0, 63, low, high)) \ + | EFX_INSERT64(0, 63, low, high, value)); \ (oword).u64[1] = (((oword).u64[1] \ - & ~EFX_INPLACE_MASK64(64, 127, field)) \ - | EFX_INSERT_FIELD64(64, 127, field, value)); \ + & ~EFX_INPLACE_MASK64(64, 127, low, high)) \ + | EFX_INSERT64(64, 127, low, high, value)); \ } while (0) -#define EFX_SET_QWORD_FIELD64(qword, field, value) do { \ +#define EFX_SET_QWORD64(qword, low, high, value) do { \ (qword).u64[0] = (((qword).u64[0] \ - & ~EFX_INPLACE_MASK64(0, 63, field)) \ - | EFX_INSERT_FIELD64(0, 63, field, value)); \ + & ~EFX_INPLACE_MASK64(0, 63, low, high)) \ + | EFX_INSERT64(0, 63, low, high, value)); \ } while (0) -#define EFX_SET_OWORD_FIELD32(oword, field, value) do { \ +#define EFX_SET_OWORD32(oword, low, high, value) do { \ (oword).u32[0] = (((oword).u32[0] \ - & ~EFX_INPLACE_MASK32(0, 31, field)) \ - | EFX_INSERT_FIELD32(0, 31, field, value)); \ + & ~EFX_INPLACE_MASK32(0, 31, low, high)) \ + | EFX_INSERT32(0, 31, low, high, value)); \ (oword).u32[1] = (((oword).u32[1] \ - & ~EFX_INPLACE_MASK32(32, 63, field)) \ - | EFX_INSERT_FIELD32(32, 63, field, value)); \ + & ~EFX_INPLACE_MASK32(32, 63, low, high)) \ + | EFX_INSERT32(32, 63, low, high, value)); \ (oword).u32[2] = (((oword).u32[2] \ - & ~EFX_INPLACE_MASK32(64, 95, field)) \ - | EFX_INSERT_FIELD32(64, 95, field, value)); \ + & ~EFX_INPLACE_MASK32(64, 95, low, high)) \ + | EFX_INSERT32(64, 95, low, high, value)); \ (oword).u32[3] = (((oword).u32[3] \ - & ~EFX_INPLACE_MASK32(96, 127, field)) \ - | EFX_INSERT_FIELD32(96, 127, field, value)); \ + & ~EFX_INPLACE_MASK32(96, 127, low, high)) \ + | EFX_INSERT32(96, 127, low, high, value)); \ } while (0) -#define EFX_SET_QWORD_FIELD32(qword, field, value) do { \ +#define EFX_SET_QWORD32(qword, low, high, value) do { \ (qword).u32[0] = (((qword).u32[0] \ - & ~EFX_INPLACE_MASK32(0, 31, field)) \ - | EFX_INSERT_FIELD32(0, 31, field, value)); \ + & ~EFX_INPLACE_MASK32(0, 31, low, high)) \ + | EFX_INSERT32(0, 31, low, high, value)); \ (qword).u32[1] = (((qword).u32[1] \ - & ~EFX_INPLACE_MASK32(32, 63, field)) \ - | EFX_INSERT_FIELD32(32, 63, field, value)); \ + & ~EFX_INPLACE_MASK32(32, 63, low, high)) \ + | EFX_INSERT32(32, 63, low, high, value)); \ } while (0) -#define EFX_SET_DWORD_FIELD(dword, field, value) do { \ - (dword).u32[0] = (((dword).u32[0] \ - & ~EFX_INPLACE_MASK32(0, 31, field)) \ - | EFX_INSERT_FIELD32(0, 31, field, value)); \ +#define EFX_SET_DWORD32(dword, low, high, value) do { \ + (dword).u32[0] = (((dword).u32[0] \ + & ~EFX_INPLACE_MASK32(0, 31, low, high)) \ + | EFX_INSERT32(0, 31, low, high, value)); \ } while (0) +#define EFX_SET_OWORD_FIELD64(oword, field, value) \ + EFX_SET_OWORD64(oword, EFX_LOW_BIT(field), \ + EFX_HIGH_BIT(field), value) + +#define EFX_SET_QWORD_FIELD64(qword, field, value) \ + EFX_SET_QWORD64(qword, EFX_LOW_BIT(field), \ + EFX_HIGH_BIT(field), value) + +#define EFX_SET_OWORD_FIELD32(oword, field, value) \ + EFX_SET_OWORD32(oword, EFX_LOW_BIT(field), \ + EFX_HIGH_BIT(field), value) + +#define EFX_SET_QWORD_FIELD32(qword, field, value) \ + EFX_SET_QWORD32(qword, EFX_LOW_BIT(field), \ + EFX_HIGH_BIT(field), value) + +#define EFX_SET_DWORD_FIELD(dword, field, value) \ + EFX_SET_DWORD32(dword, EFX_LOW_BIT(field), \ + EFX_HIGH_BIT(field), value) + + + #if BITS_PER_LONG == 64 #define EFX_SET_OWORD_FIELD EFX_SET_OWORD_FIELD64 #define EFX_SET_QWORD_FIELD EFX_SET_QWORD_FIELD64 @@ -502,4 +540,10 @@ typedef union efx_oword { #define EFX_DMA_TYPE_WIDTH(width) \ (((width) < DMA_ADDR_T_WIDTH) ? (width) : DMA_ADDR_T_WIDTH) + +/* Static initialiser */ +#define EFX_OWORD32(a, b, c, d) \ + { .u32 = { __constant_cpu_to_le32(a), __constant_cpu_to_le32(b), \ + __constant_cpu_to_le32(c), __constant_cpu_to_le32(d) } } + #endif /* EFX_BITFIELD_H */ diff --git a/drivers/net/sfc/boards.c b/drivers/net/sfc/boards.c index d3d3dd0a117..99e60237326 100644 --- a/drivers/net/sfc/boards.c +++ b/drivers/net/sfc/boards.c @@ -31,23 +31,23 @@ static void blink_led_timer(unsigned long context) mod_timer(&bl->timer, jiffies + BLINK_INTERVAL); } -static void board_blink(struct efx_nic *efx, int blink) +static void board_blink(struct efx_nic *efx, bool blink) { struct efx_blinker *blinker = &efx->board_info.blinker; /* The rtnl mutex serialises all ethtool ioctls, so * nothing special needs doing here. */ if (blink) { - blinker->resubmit = 1; - blinker->state = 0; + blinker->resubmit = true; + blinker->state = false; setup_timer(&blinker->timer, blink_led_timer, (unsigned long)efx); mod_timer(&blinker->timer, jiffies + BLINK_INTERVAL); } else { - blinker->resubmit = 0; + blinker->resubmit = false; if (blinker->timer.function) del_timer_sync(&blinker->timer); - efx->board_info.set_fault_led(efx, 0); + efx->board_info.set_fault_led(efx, false); } } @@ -78,7 +78,7 @@ static int sfe4002_init_leds(struct efx_nic *efx) return 0; } -static void sfe4002_fault_led(struct efx_nic *efx, int state) +static void sfe4002_fault_led(struct efx_nic *efx, bool state) { xfp_set_led(efx, SFE4002_FAULT_LED, state ? QUAKE_LED_ON : QUAKE_LED_OFF); diff --git a/drivers/net/sfc/boards.h b/drivers/net/sfc/boards.h index e5e844359ce..c6e01b64bfb 100644 --- a/drivers/net/sfc/boards.h +++ b/drivers/net/sfc/boards.h @@ -21,7 +21,5 @@ enum efx_board_type { extern int efx_set_board_info(struct efx_nic *efx, u16 revision_info); extern int sfe4001_init(struct efx_nic *efx); -/* Are we putting the PHY into flash config mode */ -extern unsigned int sfe4001_phy_flash_cfg; #endif diff --git a/drivers/net/sfc/efx.c b/drivers/net/sfc/efx.c index 45c72eebb3a..0d47d6ffe68 100644 --- a/drivers/net/sfc/efx.c +++ b/drivers/net/sfc/efx.c @@ -28,7 +28,6 @@ #include "efx.h" #include "mdio_10g.h" #include "falcon.h" -#include "workarounds.h" #include "mac.h" #define EFX_MAX_MTU (9 * 1024) @@ -52,7 +51,7 @@ static struct workqueue_struct *refill_workqueue; * This sets the default for new devices. It can be controlled later * using ethtool. */ -static int lro = 1; +static int lro = true; module_param(lro, int, 0644); MODULE_PARM_DESC(lro, "Large receive offload acceleration"); @@ -65,7 +64,7 @@ MODULE_PARM_DESC(lro, "Large receive offload acceleration"); * This is forced to 0 for MSI interrupt mode as the interrupt vector * is not written */ -static unsigned int separate_tx_and_rx_channels = 1; +static unsigned int separate_tx_and_rx_channels = true; /* This is the weight assigned to each of the (per-channel) virtual * NAPI devices. @@ -81,7 +80,7 @@ unsigned int efx_monitor_interval = 1 * HZ; /* This controls whether or not the hardware monitor will trigger a * reset when it detects an error condition. */ -static unsigned int monitor_reset = 1; +static unsigned int monitor_reset = true; /* This controls whether or not the driver will initialise devices * with invalid MAC addresses stored in the EEPROM or flash. If true, @@ -141,8 +140,7 @@ static void efx_fini_channels(struct efx_nic *efx); #define EFX_ASSERT_RESET_SERIALISED(efx) \ do { \ - if ((efx->state == STATE_RUNNING) || \ - (efx->state == STATE_RESETTING)) \ + if (efx->state == STATE_RUNNING) \ ASSERT_RTNL(); \ } while (0) @@ -159,16 +157,18 @@ static void efx_fini_channels(struct efx_nic *efx); * never be concurrently called more than once on the same channel, * though different channels may be being processed concurrently. */ -static inline int efx_process_channel(struct efx_channel *channel, int rx_quota) +static int efx_process_channel(struct efx_channel *channel, int rx_quota) { - int rxdmaqs; - struct efx_rx_queue *rx_queue; + struct efx_nic *efx = channel->efx; + int rx_packets; - if (unlikely(channel->efx->reset_pending != RESET_TYPE_NONE || + if (unlikely(efx->reset_pending != RESET_TYPE_NONE || !channel->enabled)) - return rx_quota; + return 0; - rxdmaqs = falcon_process_eventq(channel, &rx_quota); + rx_packets = falcon_process_eventq(channel, rx_quota); + if (rx_packets == 0) + return 0; /* Deliver last RX packet. */ if (channel->rx_pkt) { @@ -180,16 +180,9 @@ static inline int efx_process_channel(struct efx_channel *channel, int rx_quota) efx_flush_lro(channel); efx_rx_strategy(channel); - /* Refill descriptor rings as necessary */ - rx_queue = &channel->efx->rx_queue[0]; - while (rxdmaqs) { - if (rxdmaqs & 0x01) - efx_fast_push_rx_descriptors(rx_queue); - rx_queue++; - rxdmaqs >>= 1; - } + efx_fast_push_rx_descriptors(&efx->rx_queue[channel->channel]); - return rx_quota; + return rx_packets; } /* Mark channel as finished processing @@ -203,7 +196,7 @@ static inline void efx_channel_processed(struct efx_channel *channel) /* The interrupt handler for this channel may set work_pending * as soon as we acknowledge the events we've seen. Make sure * it's cleared before then. */ - channel->work_pending = 0; + channel->work_pending = false; smp_wmb(); falcon_eventq_read_ack(channel); @@ -219,14 +212,12 @@ static int efx_poll(struct napi_struct *napi, int budget) struct efx_channel *channel = container_of(napi, struct efx_channel, napi_str); struct net_device *napi_dev = channel->napi_dev; - int unused; int rx_packets; EFX_TRACE(channel->efx, "channel %d NAPI poll executing on CPU %d\n", channel->channel, raw_smp_processor_id()); - unused = efx_process_channel(channel, budget); - rx_packets = (budget - unused); + rx_packets = efx_process_channel(channel, budget); if (rx_packets < budget) { /* There is no race here; although napi_disable() will @@ -260,7 +251,7 @@ void efx_process_channel_now(struct efx_channel *channel) falcon_disable_interrupts(efx); if (efx->legacy_irq) synchronize_irq(efx->legacy_irq); - if (channel->has_interrupt && channel->irq) + if (channel->irq) synchronize_irq(channel->irq); /* Wait for any NAPI processing to complete */ @@ -290,13 +281,13 @@ static int efx_probe_eventq(struct efx_channel *channel) } /* Prepare channel's event queue */ -static int efx_init_eventq(struct efx_channel *channel) +static void efx_init_eventq(struct efx_channel *channel) { EFX_LOG(channel->efx, "chan %d init event queue\n", channel->channel); channel->eventq_read_ptr = 0; - return falcon_init_eventq(channel); + falcon_init_eventq(channel); } static void efx_fini_eventq(struct efx_channel *channel) @@ -362,12 +353,11 @@ static int efx_probe_channel(struct efx_channel *channel) * to propagate configuration changes (mtu, checksum offload), or * to clear hardware error conditions */ -static int efx_init_channels(struct efx_nic *efx) +static void efx_init_channels(struct efx_nic *efx) { struct efx_tx_queue *tx_queue; struct efx_rx_queue *rx_queue; struct efx_channel *channel; - int rc = 0; /* Calculate the rx buffer allocation parameters required to * support the current MTU, including padding for header @@ -382,36 +372,20 @@ static int efx_init_channels(struct efx_nic *efx) efx_for_each_channel(channel, efx) { EFX_LOG(channel->efx, "init chan %d\n", channel->channel); - rc = efx_init_eventq(channel); - if (rc) - goto err; + efx_init_eventq(channel); - efx_for_each_channel_tx_queue(tx_queue, channel) { - rc = efx_init_tx_queue(tx_queue); - if (rc) - goto err; - } + efx_for_each_channel_tx_queue(tx_queue, channel) + efx_init_tx_queue(tx_queue); /* The rx buffer allocation strategy is MTU dependent */ efx_rx_strategy(channel); - efx_for_each_channel_rx_queue(rx_queue, channel) { - rc = efx_init_rx_queue(rx_queue); - if (rc) - goto err; - } + efx_for_each_channel_rx_queue(rx_queue, channel) + efx_init_rx_queue(rx_queue); WARN_ON(channel->rx_pkt != NULL); efx_rx_strategy(channel); } - - return 0; - - err: - EFX_ERR(efx, "failed to initialise channel %d\n", - channel ? channel->channel : -1); - efx_fini_channels(efx); - return rc; } /* This enables event queue processing and packet transmission. @@ -432,8 +406,8 @@ static void efx_start_channel(struct efx_channel *channel) /* The interrupt handler for this channel may set work_pending * as soon as we enable it. Make sure it's cleared before * then. Similarly, make sure it sees the enabled flag set. */ - channel->work_pending = 0; - channel->enabled = 1; + channel->work_pending = false; + channel->enabled = true; smp_wmb(); napi_enable(&channel->napi_str); @@ -456,7 +430,7 @@ static void efx_stop_channel(struct efx_channel *channel) EFX_LOG(channel->efx, "stop chan %d\n", channel->channel); - channel->enabled = 0; + channel->enabled = false; napi_disable(&channel->napi_str); /* Ensure that any worker threads have exited or will be no-ops */ @@ -526,8 +500,6 @@ void efx_schedule_slow_fill(struct efx_rx_queue *rx_queue, int delay) */ static void efx_link_status_changed(struct efx_nic *efx) { - int carrier_ok; - /* SFC Bug 5356: A net_dev notifier is registered, so we must ensure * that no events are triggered between unregister_netdev() and the * driver unloading. A more general condition is that NETDEV_CHANGE @@ -535,8 +507,12 @@ static void efx_link_status_changed(struct efx_nic *efx) if (!netif_running(efx->net_dev)) return; - carrier_ok = netif_carrier_ok(efx->net_dev) ? 1 : 0; - if (efx->link_up != carrier_ok) { + if (efx->port_inhibited) { + netif_carrier_off(efx->net_dev); + return; + } + + if (efx->link_up != netif_carrier_ok(efx->net_dev)) { efx->n_link_state_changes++; if (efx->link_up) @@ -577,13 +553,19 @@ static void efx_link_status_changed(struct efx_nic *efx) /* This call reinitialises the MAC to pick up new PHY settings. The * caller must hold the mac_lock */ -static void __efx_reconfigure_port(struct efx_nic *efx) +void __efx_reconfigure_port(struct efx_nic *efx) { WARN_ON(!mutex_is_locked(&efx->mac_lock)); EFX_LOG(efx, "reconfiguring MAC from PHY settings on CPU %d\n", raw_smp_processor_id()); + /* Serialise the promiscuous flag with efx_set_multicast_list. */ + if (efx_dev_registered(efx)) { + netif_addr_lock_bh(efx->net_dev); + netif_addr_unlock_bh(efx->net_dev); + } + falcon_reconfigure_xmac(efx); /* Inform kernel of loss/gain of carrier */ @@ -661,7 +643,8 @@ static int efx_init_port(struct efx_nic *efx) if (rc) return rc; - efx->port_initialized = 1; + efx->port_initialized = true; + efx->stats_enabled = true; /* Reconfigure port to program MAC registers */ falcon_reconfigure_xmac(efx); @@ -678,7 +661,7 @@ static void efx_start_port(struct efx_nic *efx) BUG_ON(efx->port_enabled); mutex_lock(&efx->mac_lock); - efx->port_enabled = 1; + efx->port_enabled = true; __efx_reconfigure_port(efx); mutex_unlock(&efx->mac_lock); } @@ -692,7 +675,7 @@ static void efx_stop_port(struct efx_nic *efx) EFX_LOG(efx, "stop port\n"); mutex_lock(&efx->mac_lock); - efx->port_enabled = 0; + efx->port_enabled = false; mutex_unlock(&efx->mac_lock); /* Serialise against efx_set_multicast_list() */ @@ -710,9 +693,9 @@ static void efx_fini_port(struct efx_nic *efx) return; falcon_fini_xmac(efx); - efx->port_initialized = 0; + efx->port_initialized = false; - efx->link_up = 0; + efx->link_up = false; efx_link_status_changed(efx); } @@ -823,53 +806,61 @@ static void efx_fini_io(struct efx_nic *efx) pci_disable_device(efx->pci_dev); } -/* Probe the number and type of interrupts we are able to obtain. */ +/* Get number of RX queues wanted. Return number of online CPU + * packages in the expectation that an IRQ balancer will spread + * interrupts across them. */ +static int efx_wanted_rx_queues(void) +{ + cpumask_t core_mask; + int count; + int cpu; + + cpus_clear(core_mask); + count = 0; + for_each_online_cpu(cpu) { + if (!cpu_isset(cpu, core_mask)) { + ++count; + cpus_or(core_mask, core_mask, + topology_core_siblings(cpu)); + } + } + + return count; +} + +/* Probe the number and type of interrupts we are able to obtain, and + * the resulting numbers of channels and RX queues. + */ static void efx_probe_interrupts(struct efx_nic *efx) { - int max_channel = efx->type->phys_addr_channels - 1; - struct msix_entry xentries[EFX_MAX_CHANNELS]; + int max_channels = + min_t(int, efx->type->phys_addr_channels, EFX_MAX_CHANNELS); int rc, i; if (efx->interrupt_mode == EFX_INT_MODE_MSIX) { - BUG_ON(!pci_find_capability(efx->pci_dev, PCI_CAP_ID_MSIX)); - - if (rss_cpus == 0) { - cpumask_t core_mask; - int cpu; - - cpus_clear(core_mask); - efx->rss_queues = 0; - for_each_online_cpu(cpu) { - if (!cpu_isset(cpu, core_mask)) { - ++efx->rss_queues; - cpus_or(core_mask, core_mask, - topology_core_siblings(cpu)); - } - } - } else { - efx->rss_queues = rss_cpus; - } + struct msix_entry xentries[EFX_MAX_CHANNELS]; + int wanted_ints; - efx->rss_queues = min(efx->rss_queues, max_channel + 1); - efx->rss_queues = min(efx->rss_queues, EFX_MAX_CHANNELS); + /* We want one RX queue and interrupt per CPU package + * (or as specified by the rss_cpus module parameter). + * We will need one channel per interrupt. + */ + wanted_ints = rss_cpus ? rss_cpus : efx_wanted_rx_queues(); + efx->n_rx_queues = min(wanted_ints, max_channels); - /* Request maximum number of MSI interrupts, and fill out - * the channel interrupt information the allowed allocation */ - for (i = 0; i < efx->rss_queues; i++) + for (i = 0; i < efx->n_rx_queues; i++) xentries[i].entry = i; - rc = pci_enable_msix(efx->pci_dev, xentries, efx->rss_queues); + rc = pci_enable_msix(efx->pci_dev, xentries, efx->n_rx_queues); if (rc > 0) { - EFX_BUG_ON_PARANOID(rc >= efx->rss_queues); - efx->rss_queues = rc; + EFX_BUG_ON_PARANOID(rc >= efx->n_rx_queues); + efx->n_rx_queues = rc; rc = pci_enable_msix(efx->pci_dev, xentries, - efx->rss_queues); + efx->n_rx_queues); } if (rc == 0) { - for (i = 0; i < efx->rss_queues; i++) { - efx->channel[i].has_interrupt = 1; + for (i = 0; i < efx->n_rx_queues; i++) efx->channel[i].irq = xentries[i].vector; - } } else { /* Fall back to single channel MSI */ efx->interrupt_mode = EFX_INT_MODE_MSI; @@ -879,11 +870,10 @@ static void efx_probe_interrupts(struct efx_nic *efx) /* Try single interrupt MSI */ if (efx->interrupt_mode == EFX_INT_MODE_MSI) { - efx->rss_queues = 1; + efx->n_rx_queues = 1; rc = pci_enable_msi(efx->pci_dev); if (rc == 0) { efx->channel[0].irq = efx->pci_dev->irq; - efx->channel[0].has_interrupt = 1; } else { EFX_ERR(efx, "could not enable MSI\n"); efx->interrupt_mode = EFX_INT_MODE_LEGACY; @@ -892,10 +882,7 @@ static void efx_probe_interrupts(struct efx_nic *efx) /* Assume legacy interrupts */ if (efx->interrupt_mode == EFX_INT_MODE_LEGACY) { - efx->rss_queues = 1; - /* Every channel is interruptible */ - for (i = 0; i < EFX_MAX_CHANNELS; i++) - efx->channel[i].has_interrupt = 1; + efx->n_rx_queues = 1; efx->legacy_irq = efx->pci_dev->irq; } } @@ -905,7 +892,7 @@ static void efx_remove_interrupts(struct efx_nic *efx) struct efx_channel *channel; /* Remove MSI/MSI-X interrupts */ - efx_for_each_channel_with_interrupt(channel, efx) + efx_for_each_channel(channel, efx) channel->irq = 0; pci_disable_msi(efx->pci_dev); pci_disable_msix(efx->pci_dev); @@ -914,45 +901,22 @@ static void efx_remove_interrupts(struct efx_nic *efx) efx->legacy_irq = 0; } -/* Select number of used resources - * Should be called after probe_interrupts() - */ -static void efx_select_used(struct efx_nic *efx) +static void efx_set_channels(struct efx_nic *efx) { struct efx_tx_queue *tx_queue; struct efx_rx_queue *rx_queue; - int i; - - /* TX queues. One per port per channel with TX capability - * (more than one per port won't work on Linux, due to out - * of order issues... but will be fine on Solaris) - */ - tx_queue = &efx->tx_queue[0]; - /* Perform this for each channel with TX capabilities. - * At the moment, we only support a single TX queue - */ - tx_queue->used = 1; - if ((!EFX_INT_MODE_USE_MSI(efx)) && separate_tx_and_rx_channels) - tx_queue->channel = &efx->channel[1]; - else - tx_queue->channel = &efx->channel[0]; - tx_queue->channel->used_flags |= EFX_USED_BY_TX; - tx_queue++; - - /* RX queues. Each has a dedicated channel. */ - for (i = 0; i < EFX_MAX_RX_QUEUES; i++) { - rx_queue = &efx->rx_queue[i]; + efx_for_each_tx_queue(tx_queue, efx) { + if (!EFX_INT_MODE_USE_MSI(efx) && separate_tx_and_rx_channels) + tx_queue->channel = &efx->channel[1]; + else + tx_queue->channel = &efx->channel[0]; + tx_queue->channel->used_flags |= EFX_USED_BY_TX; + } - if (i < efx->rss_queues) { - rx_queue->used = 1; - /* If we allow multiple RX queues per channel - * we need to decide that here - */ - rx_queue->channel = &efx->channel[rx_queue->queue]; - rx_queue->channel->used_flags |= EFX_USED_BY_RX; - rx_queue++; - } + efx_for_each_rx_queue(rx_queue, efx) { + rx_queue->channel = &efx->channel[rx_queue->queue]; + rx_queue->channel->used_flags |= EFX_USED_BY_RX; } } @@ -971,8 +935,7 @@ static int efx_probe_nic(struct efx_nic *efx) * in MSI-X interrupts. */ efx_probe_interrupts(efx); - /* Determine number of RX queues and TX queues */ - efx_select_used(efx); + efx_set_channels(efx); /* Initialise the interrupt moderation settings */ efx_init_irq_moderation(efx, tx_irq_mod_usec, rx_irq_mod_usec); @@ -1058,7 +1021,8 @@ static void efx_start_all(struct efx_nic *efx) /* Mark the port as enabled so port reconfigurations can start, then * restart the transmit interface early so the watchdog timer stops */ efx_start_port(efx); - efx_wake_queue(efx); + if (efx_dev_registered(efx)) + efx_wake_queue(efx); efx_for_each_channel(channel, efx) efx_start_channel(channel); @@ -1109,7 +1073,7 @@ static void efx_stop_all(struct efx_nic *efx) falcon_disable_interrupts(efx); if (efx->legacy_irq) synchronize_irq(efx->legacy_irq); - efx_for_each_channel_with_interrupt(channel, efx) { + efx_for_each_channel(channel, efx) { if (channel->irq) synchronize_irq(channel->irq); } @@ -1133,8 +1097,8 @@ static void efx_stop_all(struct efx_nic *efx) /* Stop the kernel transmit interface late, so the watchdog * timer isn't ticking over the flush */ - efx_stop_queue(efx); if (efx_dev_registered(efx)) { + efx_stop_queue(efx); netif_tx_lock_bh(efx->net_dev); netif_tx_unlock_bh(efx->net_dev); } @@ -1151,24 +1115,16 @@ static void efx_remove_all(struct efx_nic *efx) } /* A convinience function to safely flush all the queues */ -int efx_flush_queues(struct efx_nic *efx) +void efx_flush_queues(struct efx_nic *efx) { - int rc; - EFX_ASSERT_RESET_SERIALISED(efx); efx_stop_all(efx); efx_fini_channels(efx); - rc = efx_init_channels(efx); - if (rc) { - efx_schedule_reset(efx, RESET_TYPE_DISABLE); - return rc; - } + efx_init_channels(efx); efx_start_all(efx); - - return 0; } /************************************************************************** @@ -1249,7 +1205,7 @@ static void efx_monitor(struct work_struct *data) */ static int efx_ioctl(struct net_device *net_dev, struct ifreq *ifr, int cmd) { - struct efx_nic *efx = net_dev->priv; + struct efx_nic *efx = netdev_priv(net_dev); EFX_ASSERT_RESET_SERIALISED(efx); @@ -1303,10 +1259,10 @@ static void efx_fini_napi(struct efx_nic *efx) */ static void efx_netpoll(struct net_device *net_dev) { - struct efx_nic *efx = net_dev->priv; + struct efx_nic *efx = netdev_priv(net_dev); struct efx_channel *channel; - efx_for_each_channel_with_interrupt(channel, efx) + efx_for_each_channel(channel, efx) efx_schedule_channel(channel); } @@ -1321,12 +1277,15 @@ static void efx_netpoll(struct net_device *net_dev) /* Context: process, rtnl_lock() held. */ static int efx_net_open(struct net_device *net_dev) { - struct efx_nic *efx = net_dev->priv; + struct efx_nic *efx = netdev_priv(net_dev); EFX_ASSERT_RESET_SERIALISED(efx); EFX_LOG(efx, "opening device %s on CPU %d\n", net_dev->name, raw_smp_processor_id()); + if (efx->phy_mode & PHY_MODE_SPECIAL) + return -EBUSY; + efx_start_all(efx); return 0; } @@ -1337,8 +1296,7 @@ static int efx_net_open(struct net_device *net_dev) */ static int efx_net_stop(struct net_device *net_dev) { - struct efx_nic *efx = net_dev->priv; - int rc; + struct efx_nic *efx = netdev_priv(net_dev); EFX_LOG(efx, "closing %s on CPU %d\n", net_dev->name, raw_smp_processor_id()); @@ -1346,9 +1304,7 @@ static int efx_net_stop(struct net_device *net_dev) /* Stop the device and flush all the channels */ efx_stop_all(efx); efx_fini_channels(efx); - rc = efx_init_channels(efx); - if (rc) - efx_schedule_reset(efx, RESET_TYPE_DISABLE); + efx_init_channels(efx); return 0; } @@ -1356,7 +1312,7 @@ static int efx_net_stop(struct net_device *net_dev) /* Context: process, dev_base_lock or RTNL held, non-blocking. */ static struct net_device_stats *efx_net_stats(struct net_device *net_dev) { - struct efx_nic *efx = net_dev->priv; + struct efx_nic *efx = netdev_priv(net_dev); struct efx_mac_stats *mac_stats = &efx->mac_stats; struct net_device_stats *stats = &net_dev->stats; @@ -1366,7 +1322,7 @@ static struct net_device_stats *efx_net_stats(struct net_device *net_dev) */ if (!spin_trylock(&efx->stats_lock)) return stats; - if (efx->state == STATE_RUNNING) { + if (efx->stats_enabled) { falcon_update_stats_xmac(efx); falcon_update_nic_stats(efx); } @@ -1403,7 +1359,7 @@ static struct net_device_stats *efx_net_stats(struct net_device *net_dev) /* Context: netif_tx_lock held, BHs disabled. */ static void efx_watchdog(struct net_device *net_dev) { - struct efx_nic *efx = net_dev->priv; + struct efx_nic *efx = netdev_priv(net_dev); EFX_ERR(efx, "TX stuck with stop_count=%d port_enabled=%d: %s\n", atomic_read(&efx->netif_stop_count), efx->port_enabled, @@ -1417,7 +1373,7 @@ static void efx_watchdog(struct net_device *net_dev) /* Context: process, rtnl_lock() held. */ static int efx_change_mtu(struct net_device *net_dev, int new_mtu) { - struct efx_nic *efx = net_dev->priv; + struct efx_nic *efx = netdev_priv(net_dev); int rc = 0; EFX_ASSERT_RESET_SERIALISED(efx); @@ -1431,21 +1387,15 @@ static int efx_change_mtu(struct net_device *net_dev, int new_mtu) efx_fini_channels(efx); net_dev->mtu = new_mtu; - rc = efx_init_channels(efx); - if (rc) - goto fail; + efx_init_channels(efx); efx_start_all(efx); return rc; - - fail: - efx_schedule_reset(efx, RESET_TYPE_DISABLE); - return rc; } static int efx_set_mac_address(struct net_device *net_dev, void *data) { - struct efx_nic *efx = net_dev->priv; + struct efx_nic *efx = netdev_priv(net_dev); struct sockaddr *addr = data; char *new_addr = addr->sa_data; @@ -1466,26 +1416,19 @@ static int efx_set_mac_address(struct net_device *net_dev, void *data) return 0; } -/* Context: netif_tx_lock held, BHs disabled. */ +/* Context: netif_addr_lock held, BHs disabled. */ static void efx_set_multicast_list(struct net_device *net_dev) { - struct efx_nic *efx = net_dev->priv; + struct efx_nic *efx = netdev_priv(net_dev); struct dev_mc_list *mc_list = net_dev->mc_list; union efx_multicast_hash *mc_hash = &efx->multicast_hash; - int promiscuous; + bool promiscuous = !!(net_dev->flags & IFF_PROMISC); + bool changed = (efx->promiscuous != promiscuous); u32 crc; int bit; int i; - /* Set per-MAC promiscuity flag and reconfigure MAC if necessary */ - promiscuous = (net_dev->flags & IFF_PROMISC) ? 1 : 0; - if (efx->promiscuous != promiscuous) { - efx->promiscuous = promiscuous; - /* Close the window between efx_stop_port() and efx_flush_all() - * by only queuing work when the port is enabled. */ - if (efx->port_enabled) - queue_work(efx->workqueue, &efx->reconfigure_work); - } + efx->promiscuous = promiscuous; /* Build multicast hash table */ if (promiscuous || (net_dev->flags & IFF_ALLMULTI)) { @@ -1500,6 +1443,13 @@ static void efx_set_multicast_list(struct net_device *net_dev) } } + if (!efx->port_enabled) + /* Delay pushing settings until efx_start_port() */ + return; + + if (changed) + queue_work(efx->workqueue, &efx->reconfigure_work); + /* Create and activate new global multicast hash table */ falcon_set_multicast_hash(efx); } @@ -1510,7 +1460,7 @@ static int efx_netdev_event(struct notifier_block *this, struct net_device *net_dev = ptr; if (net_dev->open == efx_net_open && event == NETDEV_CHANGENAME) { - struct efx_nic *efx = net_dev->priv; + struct efx_nic *efx = netdev_priv(net_dev); strcpy(efx->name, net_dev->name); } @@ -1568,7 +1518,7 @@ static void efx_unregister_netdev(struct efx_nic *efx) if (!efx->net_dev) return; - BUG_ON(efx->net_dev->priv != efx); + BUG_ON(netdev_priv(efx->net_dev) != efx); /* Free up any skbs still remaining. This has to happen before * we try to unregister the netdev as running their destructors @@ -1588,49 +1538,60 @@ static void efx_unregister_netdev(struct efx_nic *efx) * **************************************************************************/ -/* The final hardware and software finalisation before reset. */ -static int efx_reset_down(struct efx_nic *efx, struct ethtool_cmd *ecmd) +/* Tears down the entire software state and most of the hardware state + * before reset. */ +void efx_reset_down(struct efx_nic *efx, struct ethtool_cmd *ecmd) { int rc; EFX_ASSERT_RESET_SERIALISED(efx); + /* The net_dev->get_stats handler is quite slow, and will fail + * if a fetch is pending over reset. Serialise against it. */ + spin_lock(&efx->stats_lock); + efx->stats_enabled = false; + spin_unlock(&efx->stats_lock); + + efx_stop_all(efx); + mutex_lock(&efx->mac_lock); + rc = falcon_xmac_get_settings(efx, ecmd); - if (rc) { + if (rc) EFX_ERR(efx, "could not back up PHY settings\n"); - goto fail; - } efx_fini_channels(efx); - return 0; - - fail: - return rc; } -/* The first part of software initialisation after a hardware reset - * This function does not handle serialisation with the kernel, it - * assumes the caller has done this */ -static int efx_reset_up(struct efx_nic *efx, struct ethtool_cmd *ecmd) +/* This function will always ensure that the locks acquired in + * efx_reset_down() are released. A failure return code indicates + * that we were unable to reinitialise the hardware, and the + * driver should be disabled. If ok is false, then the rx and tx + * engines are not restarted, pending a RESET_DISABLE. */ +int efx_reset_up(struct efx_nic *efx, struct ethtool_cmd *ecmd, bool ok) { int rc; - rc = efx_init_channels(efx); - if (rc) - goto fail1; + EFX_ASSERT_RESET_SERIALISED(efx); - /* Restore MAC and PHY settings. */ - rc = falcon_xmac_set_settings(efx, ecmd); + rc = falcon_init_nic(efx); if (rc) { - EFX_ERR(efx, "could not restore PHY settings\n"); - goto fail2; + EFX_ERR(efx, "failed to initialise NIC\n"); + ok = false; } - return 0; + if (ok) { + efx_init_channels(efx); - fail2: - efx_fini_channels(efx); - fail1: + if (falcon_xmac_set_settings(efx, ecmd)) + EFX_ERR(efx, "could not restore PHY settings\n"); + } + + mutex_unlock(&efx->mac_lock); + + if (ok) { + efx_start_all(efx); + efx->stats_enabled = true; + } return rc; } @@ -1659,25 +1620,14 @@ static int efx_reset(struct efx_nic *efx) goto unlock_rtnl; } - efx->state = STATE_RESETTING; EFX_INFO(efx, "resetting (%d)\n", method); - /* The net_dev->get_stats handler is quite slow, and will fail - * if a fetch is pending over reset. Serialise against it. */ - spin_lock(&efx->stats_lock); - spin_unlock(&efx->stats_lock); - - efx_stop_all(efx); - mutex_lock(&efx->mac_lock); - - rc = efx_reset_down(efx, &ecmd); - if (rc) - goto fail1; + efx_reset_down(efx, &ecmd); rc = falcon_reset_hw(efx, method); if (rc) { EFX_ERR(efx, "failed to reset hardware\n"); - goto fail2; + goto fail; } /* Allow resets to be rescheduled. */ @@ -1689,46 +1639,27 @@ static int efx_reset(struct efx_nic *efx) * can respond to requests. */ pci_set_master(efx->pci_dev); - /* Reinitialise device. This is appropriate in the RESET_TYPE_DISABLE - * case so the driver can talk to external SRAM */ - rc = falcon_init_nic(efx); - if (rc) { - EFX_ERR(efx, "failed to initialise NIC\n"); - goto fail3; - } - /* Leave device stopped if necessary */ if (method == RESET_TYPE_DISABLE) { - /* Reinitialise the device anyway so the driver unload sequence - * can talk to the external SRAM */ - falcon_init_nic(efx); rc = -EIO; - goto fail4; + goto fail; } - rc = efx_reset_up(efx, &ecmd); + rc = efx_reset_up(efx, &ecmd, true); if (rc) - goto fail5; + goto disable; - mutex_unlock(&efx->mac_lock); EFX_LOG(efx, "reset complete\n"); - - efx->state = STATE_RUNNING; - efx_start_all(efx); - unlock_rtnl: rtnl_unlock(); return 0; - fail5: - fail4: - fail3: - fail2: - fail1: + fail: + efx_reset_up(efx, &ecmd, false); + disable: EFX_ERR(efx, "has been disabled\n"); efx->state = STATE_DISABLED; - mutex_unlock(&efx->mac_lock); rtnl_unlock(); efx_unregister_netdev(efx); efx_fini_port(efx); @@ -1801,7 +1732,7 @@ static struct pci_device_id efx_pci_table[] __devinitdata = { * * Dummy PHY/MAC/Board operations * - * Can be used where the MAC does not implement this operation + * Can be used for some unimplemented operations * Needed so all function pointers are valid and do not have to be tested * before use * @@ -1811,7 +1742,7 @@ int efx_port_dummy_op_int(struct efx_nic *efx) return 0; } void efx_port_dummy_op_void(struct efx_nic *efx) {} -void efx_port_dummy_op_blink(struct efx_nic *efx, int blink) {} +void efx_port_dummy_op_blink(struct efx_nic *efx, bool blink) {} static struct efx_phy_operations efx_dummy_phy_operations = { .init = efx_port_dummy_op_int, @@ -1822,17 +1753,12 @@ static struct efx_phy_operations efx_dummy_phy_operations = { .reset_xaui = efx_port_dummy_op_void, }; -/* Dummy board operations */ -static int efx_nic_dummy_op_int(struct efx_nic *nic) -{ - return 0; -} - static struct efx_board efx_dummy_board_info = { - .init = efx_nic_dummy_op_int, - .init_leds = efx_port_dummy_op_int, - .set_fault_led = efx_port_dummy_op_blink, - .fini = efx_port_dummy_op_void, + .init = efx_port_dummy_op_int, + .init_leds = efx_port_dummy_op_int, + .set_fault_led = efx_port_dummy_op_blink, + .blink = efx_port_dummy_op_blink, + .fini = efx_port_dummy_op_void, }; /************************************************************************** @@ -1865,7 +1791,7 @@ static int efx_init_struct(struct efx_nic *efx, struct efx_nic_type *type, efx->board_info = efx_dummy_board_info; efx->net_dev = net_dev; - efx->rx_checksum_enabled = 1; + efx->rx_checksum_enabled = true; spin_lock_init(&efx->netif_stop_lock); spin_lock_init(&efx->stats_lock); mutex_init(&efx->mac_lock); @@ -1878,10 +1804,9 @@ static int efx_init_struct(struct efx_nic *efx, struct efx_nic_type *type, channel = &efx->channel[i]; channel->efx = efx; channel->channel = i; - channel->evqnum = i; - channel->work_pending = 0; + channel->work_pending = false; } - for (i = 0; i < EFX_MAX_TX_QUEUES; i++) { + for (i = 0; i < EFX_TX_QUEUE_COUNT; i++) { tx_queue = &efx->tx_queue[i]; tx_queue->efx = efx; tx_queue->queue = i; @@ -2056,19 +1981,16 @@ static int efx_pci_probe_main(struct efx_nic *efx) goto fail5; } - rc = efx_init_channels(efx); - if (rc) - goto fail6; + efx_init_channels(efx); rc = falcon_init_interrupt(efx); if (rc) - goto fail7; + goto fail6; return 0; - fail7: - efx_fini_channels(efx); fail6: + efx_fini_channels(efx); efx_fini_port(efx); fail5: fail4: @@ -2105,7 +2027,10 @@ static int __devinit efx_pci_probe(struct pci_dev *pci_dev, NETIF_F_HIGHDMA | NETIF_F_TSO); if (lro) net_dev->features |= NETIF_F_LRO; - efx = net_dev->priv; + /* Mask for features that also apply to VLAN devices */ + net_dev->vlan_features |= (NETIF_F_ALL_CSUM | NETIF_F_SG | + NETIF_F_HIGHDMA | NETIF_F_TSO); + efx = netdev_priv(net_dev); pci_set_drvdata(pci_dev, efx); rc = efx_init_struct(efx, type, pci_dev, net_dev); if (rc) diff --git a/drivers/net/sfc/efx.h b/drivers/net/sfc/efx.h index 3b2f69f4a9a..d02937b70ee 100644 --- a/drivers/net/sfc/efx.h +++ b/drivers/net/sfc/efx.h @@ -28,15 +28,21 @@ extern void efx_wake_queue(struct efx_nic *efx); /* RX */ extern void efx_xmit_done(struct efx_tx_queue *tx_queue, unsigned int index); extern void efx_rx_packet(struct efx_rx_queue *rx_queue, unsigned int index, - unsigned int len, int checksummed, int discard); + unsigned int len, bool checksummed, bool discard); extern void efx_schedule_slow_fill(struct efx_rx_queue *rx_queue, int delay); /* Channels */ extern void efx_process_channel_now(struct efx_channel *channel); -extern int efx_flush_queues(struct efx_nic *efx); +extern void efx_flush_queues(struct efx_nic *efx); /* Ports */ extern void efx_reconfigure_port(struct efx_nic *efx); +extern void __efx_reconfigure_port(struct efx_nic *efx); + +/* Reset handling */ +extern void efx_reset_down(struct efx_nic *efx, struct ethtool_cmd *ecmd); +extern int efx_reset_up(struct efx_nic *efx, struct ethtool_cmd *ecmd, + bool ok); /* Global */ extern void efx_schedule_reset(struct efx_nic *efx, enum reset_type type); @@ -50,7 +56,7 @@ extern void efx_hex_dump(const u8 *, unsigned int, const char *); /* Dummy PHY ops for PHY drivers */ extern int efx_port_dummy_op_int(struct efx_nic *efx); extern void efx_port_dummy_op_void(struct efx_nic *efx); -extern void efx_port_dummy_op_blink(struct efx_nic *efx, int blink); +extern void efx_port_dummy_op_blink(struct efx_nic *efx, bool blink); extern unsigned int efx_monitor_interval; @@ -59,7 +65,7 @@ static inline void efx_schedule_channel(struct efx_channel *channel) { EFX_TRACE(channel->efx, "channel %d scheduling NAPI poll on CPU%d\n", channel->channel, raw_smp_processor_id()); - channel->work_pending = 1; + channel->work_pending = true; netif_rx_schedule(channel->napi_dev, &channel->napi_str); } diff --git a/drivers/net/sfc/enum.h b/drivers/net/sfc/enum.h index c53290d08e2..cec15dbb88e 100644 --- a/drivers/net/sfc/enum.h +++ b/drivers/net/sfc/enum.h @@ -52,12 +52,11 @@ extern const char *efx_loopback_mode_names[]; #define LOOPBACK_MASK(_efx) \ (1 << (_efx)->loopback_mode) -#define LOOPBACK_INTERNAL(_efx) \ - ((LOOPBACKS_10G_INTERNAL & LOOPBACK_MASK(_efx)) ? 1 : 0) +#define LOOPBACK_INTERNAL(_efx) \ + (!!(LOOPBACKS_10G_INTERNAL & LOOPBACK_MASK(_efx))) -#define LOOPBACK_OUT_OF(_from, _to, _mask) \ - (((LOOPBACK_MASK(_from) & (_mask)) && \ - ((LOOPBACK_MASK(_to) & (_mask)) == 0)) ? 1 : 0) +#define LOOPBACK_OUT_OF(_from, _to, _mask) \ + ((LOOPBACK_MASK(_from) & (_mask)) && !(LOOPBACK_MASK(_to) & (_mask))) /*****************************************************************************/ diff --git a/drivers/net/sfc/ethtool.c b/drivers/net/sfc/ethtool.c index e2c75d10161..fa98af58223 100644 --- a/drivers/net/sfc/ethtool.c +++ b/drivers/net/sfc/ethtool.c @@ -17,6 +17,7 @@ #include "ethtool.h" #include "falcon.h" #include "gmii.h" +#include "spi.h" #include "mac.h" const char *efx_loopback_mode_names[] = { @@ -32,8 +33,6 @@ const char *efx_loopback_mode_names[] = { [LOOPBACK_NETWORK] = "NETWORK", }; -static int efx_ethtool_set_tx_csum(struct net_device *net_dev, u32 enable); - struct ethtool_string { char name[ETH_GSTRING_LEN]; }; @@ -173,6 +172,11 @@ static struct efx_ethtool_stat efx_ethtool_stats[] = { /* Number of ethtool statistics */ #define EFX_ETHTOOL_NUM_STATS ARRAY_SIZE(efx_ethtool_stats) +/* EEPROM range with gPXE configuration */ +#define EFX_ETHTOOL_EEPROM_MAGIC 0xEFAB +#define EFX_ETHTOOL_EEPROM_MIN 0x100U +#define EFX_ETHTOOL_EEPROM_MAX 0x400U + /************************************************************************** * * Ethtool operations @@ -183,7 +187,7 @@ static struct efx_ethtool_stat efx_ethtool_stats[] = { /* Identify device by flashing LEDs */ static int efx_ethtool_phys_id(struct net_device *net_dev, u32 seconds) { - struct efx_nic *efx = net_dev->priv; + struct efx_nic *efx = netdev_priv(net_dev); efx->board_info.blink(efx, 1); schedule_timeout_interruptible(seconds * HZ); @@ -195,7 +199,7 @@ static int efx_ethtool_phys_id(struct net_device *net_dev, u32 seconds) int efx_ethtool_get_settings(struct net_device *net_dev, struct ethtool_cmd *ecmd) { - struct efx_nic *efx = net_dev->priv; + struct efx_nic *efx = netdev_priv(net_dev); int rc; mutex_lock(&efx->mac_lock); @@ -209,7 +213,7 @@ int efx_ethtool_get_settings(struct net_device *net_dev, int efx_ethtool_set_settings(struct net_device *net_dev, struct ethtool_cmd *ecmd) { - struct efx_nic *efx = net_dev->priv; + struct efx_nic *efx = netdev_priv(net_dev); int rc; mutex_lock(&efx->mac_lock); @@ -224,7 +228,7 @@ int efx_ethtool_set_settings(struct net_device *net_dev, static void efx_ethtool_get_drvinfo(struct net_device *net_dev, struct ethtool_drvinfo *info) { - struct efx_nic *efx = net_dev->priv; + struct efx_nic *efx = netdev_priv(net_dev); strlcpy(info->driver, EFX_DRIVER_NAME, sizeof(info->driver)); strlcpy(info->version, EFX_DRIVER_VERSION, sizeof(info->version)); @@ -329,7 +333,10 @@ static int efx_ethtool_fill_self_tests(struct efx_nic *efx, unsigned int n = 0; enum efx_loopback_mode mode; - /* Interrupt */ + efx_fill_test(n++, strings, data, &tests->mii, + "core", 0, "mii", NULL); + efx_fill_test(n++, strings, data, &tests->nvram, + "core", 0, "nvram", NULL); efx_fill_test(n++, strings, data, &tests->interrupt, "core", 0, "interrupt", NULL); @@ -349,16 +356,17 @@ static int efx_ethtool_fill_self_tests(struct efx_nic *efx, "eventq.poll", NULL); } - /* PHY presence */ - efx_fill_test(n++, strings, data, &tests->phy_ok, - EFX_PORT_NAME, "phy_ok", NULL); + efx_fill_test(n++, strings, data, &tests->registers, + "core", 0, "registers", NULL); + efx_fill_test(n++, strings, data, &tests->phy, + EFX_PORT_NAME, "phy", NULL); /* Loopback tests */ efx_fill_test(n++, strings, data, &tests->loopback_speed, EFX_PORT_NAME, "loopback.speed", NULL); efx_fill_test(n++, strings, data, &tests->loopback_full_duplex, EFX_PORT_NAME, "loopback.full_duplex", NULL); - for (mode = LOOPBACK_NONE; mode < LOOPBACK_TEST_MAX; mode++) { + for (mode = LOOPBACK_NONE; mode <= LOOPBACK_TEST_MAX; mode++) { if (!(efx->loopback_modes & (1 << mode))) continue; n = efx_fill_loopback_test(efx, @@ -369,22 +377,24 @@ static int efx_ethtool_fill_self_tests(struct efx_nic *efx, return n; } -static int efx_ethtool_get_stats_count(struct net_device *net_dev) +static int efx_ethtool_get_sset_count(struct net_device *net_dev, + int string_set) { - return EFX_ETHTOOL_NUM_STATS; -} - -static int efx_ethtool_self_test_count(struct net_device *net_dev) -{ - struct efx_nic *efx = net_dev->priv; - - return efx_ethtool_fill_self_tests(efx, NULL, NULL, NULL); + switch (string_set) { + case ETH_SS_STATS: + return EFX_ETHTOOL_NUM_STATS; + case ETH_SS_TEST: + return efx_ethtool_fill_self_tests(netdev_priv(net_dev), + NULL, NULL, NULL); + default: + return -EINVAL; + } } static void efx_ethtool_get_strings(struct net_device *net_dev, u32 string_set, u8 *strings) { - struct efx_nic *efx = net_dev->priv; + struct efx_nic *efx = netdev_priv(net_dev); struct ethtool_string *ethtool_strings = (struct ethtool_string *)strings; int i; @@ -410,7 +420,7 @@ static void efx_ethtool_get_stats(struct net_device *net_dev, struct ethtool_stats *stats, u64 *data) { - struct efx_nic *efx = net_dev->priv; + struct efx_nic *efx = netdev_priv(net_dev); struct efx_mac_stats *mac_stats = &efx->mac_stats; struct efx_ethtool_stat *stat; struct efx_channel *channel; @@ -442,60 +452,21 @@ static void efx_ethtool_get_stats(struct net_device *net_dev, } } -static int efx_ethtool_set_tso(struct net_device *net_dev, u32 enable) -{ - int rc; - - /* Our TSO requires TX checksumming, so force TX checksumming - * on when TSO is enabled. - */ - if (enable) { - rc = efx_ethtool_set_tx_csum(net_dev, 1); - if (rc) - return rc; - } - - return ethtool_op_set_tso(net_dev, enable); -} - -static int efx_ethtool_set_tx_csum(struct net_device *net_dev, u32 enable) -{ - struct efx_nic *efx = net_dev->priv; - int rc; - - rc = ethtool_op_set_tx_csum(net_dev, enable); - if (rc) - return rc; - - efx_flush_queues(efx); - - /* Our TSO requires TX checksumming, so disable TSO when - * checksumming is disabled - */ - if (!enable) { - rc = efx_ethtool_set_tso(net_dev, 0); - if (rc) - return rc; - } - - return 0; -} - static int efx_ethtool_set_rx_csum(struct net_device *net_dev, u32 enable) { - struct efx_nic *efx = net_dev->priv; + struct efx_nic *efx = netdev_priv(net_dev); /* No way to stop the hardware doing the checks; we just * ignore the result. */ - efx->rx_checksum_enabled = (enable ? 1 : 0); + efx->rx_checksum_enabled = !!enable; return 0; } static u32 efx_ethtool_get_rx_csum(struct net_device *net_dev) { - struct efx_nic *efx = net_dev->priv; + struct efx_nic *efx = netdev_priv(net_dev); return efx->rx_checksum_enabled; } @@ -503,7 +474,7 @@ static u32 efx_ethtool_get_rx_csum(struct net_device *net_dev) static void efx_ethtool_self_test(struct net_device *net_dev, struct ethtool_test *test, u64 *data) { - struct efx_nic *efx = net_dev->priv; + struct efx_nic *efx = netdev_priv(net_dev); struct efx_self_tests efx_tests; int offline, already_up; int rc; @@ -533,15 +504,9 @@ static void efx_ethtool_self_test(struct net_device *net_dev, goto out; /* Perform offline tests only if online tests passed */ - if (offline) { - /* Stop the kernel from sending packets during the test. */ - efx_stop_queue(efx); - rc = efx_flush_queues(efx); - if (!rc) - rc = efx_offline_test(efx, &efx_tests, - efx->loopback_modes); - efx_wake_queue(efx); - } + if (offline) + rc = efx_offline_test(efx, &efx_tests, + efx->loopback_modes); out: if (!already_up) @@ -561,22 +526,65 @@ static void efx_ethtool_self_test(struct net_device *net_dev, /* Restart autonegotiation */ static int efx_ethtool_nway_reset(struct net_device *net_dev) { - struct efx_nic *efx = net_dev->priv; + struct efx_nic *efx = netdev_priv(net_dev); return mii_nway_restart(&efx->mii); } static u32 efx_ethtool_get_link(struct net_device *net_dev) { - struct efx_nic *efx = net_dev->priv; + struct efx_nic *efx = netdev_priv(net_dev); return efx->link_up; } +static int efx_ethtool_get_eeprom_len(struct net_device *net_dev) +{ + struct efx_nic *efx = netdev_priv(net_dev); + struct efx_spi_device *spi = efx->spi_eeprom; + + if (!spi) + return 0; + return min(spi->size, EFX_ETHTOOL_EEPROM_MAX) - + min(spi->size, EFX_ETHTOOL_EEPROM_MIN); +} + +static int efx_ethtool_get_eeprom(struct net_device *net_dev, + struct ethtool_eeprom *eeprom, u8 *buf) +{ + struct efx_nic *efx = netdev_priv(net_dev); + struct efx_spi_device *spi = efx->spi_eeprom; + size_t len; + int rc; + + rc = falcon_spi_read(spi, eeprom->offset + EFX_ETHTOOL_EEPROM_MIN, + eeprom->len, &len, buf); + eeprom->magic = EFX_ETHTOOL_EEPROM_MAGIC; + eeprom->len = len; + return rc; +} + +static int efx_ethtool_set_eeprom(struct net_device *net_dev, + struct ethtool_eeprom *eeprom, u8 *buf) +{ + struct efx_nic *efx = netdev_priv(net_dev); + struct efx_spi_device *spi = efx->spi_eeprom; + size_t len; + int rc; + + if (eeprom->magic != EFX_ETHTOOL_EEPROM_MAGIC) + return -EINVAL; + + rc = falcon_spi_write(spi, eeprom->offset + EFX_ETHTOOL_EEPROM_MIN, + eeprom->len, &len, buf); + eeprom->len = len; + return rc; +} + static int efx_ethtool_get_coalesce(struct net_device *net_dev, struct ethtool_coalesce *coalesce) { - struct efx_nic *efx = net_dev->priv; + struct efx_nic *efx = netdev_priv(net_dev); struct efx_tx_queue *tx_queue; struct efx_rx_queue *rx_queue; struct efx_channel *channel; @@ -614,7 +622,7 @@ static int efx_ethtool_get_coalesce(struct net_device *net_dev, static int efx_ethtool_set_coalesce(struct net_device *net_dev, struct ethtool_coalesce *coalesce) { - struct efx_nic *efx = net_dev->priv; + struct efx_nic *efx = netdev_priv(net_dev); struct efx_channel *channel; struct efx_tx_queue *tx_queue; unsigned tx_usecs, rx_usecs; @@ -657,7 +665,7 @@ static int efx_ethtool_set_coalesce(struct net_device *net_dev, static int efx_ethtool_set_pauseparam(struct net_device *net_dev, struct ethtool_pauseparam *pause) { - struct efx_nic *efx = net_dev->priv; + struct efx_nic *efx = netdev_priv(net_dev); enum efx_fc_type flow_control = efx->flow_control; int rc; @@ -680,11 +688,11 @@ static int efx_ethtool_set_pauseparam(struct net_device *net_dev, static void efx_ethtool_get_pauseparam(struct net_device *net_dev, struct ethtool_pauseparam *pause) { - struct efx_nic *efx = net_dev->priv; + struct efx_nic *efx = netdev_priv(net_dev); - pause->rx_pause = (efx->flow_control & EFX_FC_RX) ? 1 : 0; - pause->tx_pause = (efx->flow_control & EFX_FC_TX) ? 1 : 0; - pause->autoneg = (efx->flow_control & EFX_FC_AUTO) ? 1 : 0; + pause->rx_pause = !!(efx->flow_control & EFX_FC_RX); + pause->tx_pause = !!(efx->flow_control & EFX_FC_TX); + pause->autoneg = !!(efx->flow_control & EFX_FC_AUTO); } @@ -694,6 +702,9 @@ struct ethtool_ops efx_ethtool_ops = { .get_drvinfo = efx_ethtool_get_drvinfo, .nway_reset = efx_ethtool_nway_reset, .get_link = efx_ethtool_get_link, + .get_eeprom_len = efx_ethtool_get_eeprom_len, + .get_eeprom = efx_ethtool_get_eeprom, + .set_eeprom = efx_ethtool_set_eeprom, .get_coalesce = efx_ethtool_get_coalesce, .set_coalesce = efx_ethtool_set_coalesce, .get_pauseparam = efx_ethtool_get_pauseparam, @@ -701,17 +712,16 @@ struct ethtool_ops efx_ethtool_ops = { .get_rx_csum = efx_ethtool_get_rx_csum, .set_rx_csum = efx_ethtool_set_rx_csum, .get_tx_csum = ethtool_op_get_tx_csum, - .set_tx_csum = efx_ethtool_set_tx_csum, + .set_tx_csum = ethtool_op_set_tx_csum, .get_sg = ethtool_op_get_sg, .set_sg = ethtool_op_set_sg, .get_tso = ethtool_op_get_tso, - .set_tso = efx_ethtool_set_tso, + .set_tso = ethtool_op_set_tso, .get_flags = ethtool_op_get_flags, .set_flags = ethtool_op_set_flags, - .self_test_count = efx_ethtool_self_test_count, + .get_sset_count = efx_ethtool_get_sset_count, .self_test = efx_ethtool_self_test, .get_strings = efx_ethtool_get_strings, .phys_id = efx_ethtool_phys_id, - .get_stats_count = efx_ethtool_get_stats_count, .get_ethtool_stats = efx_ethtool_get_stats, }; diff --git a/drivers/net/sfc/falcon.c b/drivers/net/sfc/falcon.c index 9138ee5b7b7..e0c0b23f94e 100644 --- a/drivers/net/sfc/falcon.c +++ b/drivers/net/sfc/falcon.c @@ -242,7 +242,7 @@ static struct i2c_algo_bit_data falcon_i2c_bit_operations = { * falcon_alloc_special_buffer()) in Falcon's buffer table, allowing * it to be used for event queues, descriptor rings etc. */ -static int +static void falcon_init_special_buffer(struct efx_nic *efx, struct efx_special_buffer *buffer) { @@ -266,8 +266,6 @@ falcon_init_special_buffer(struct efx_nic *efx, BUF_OWNER_ID_FBUF, 0); falcon_write_sram(efx, &buf_desc, index); } - - return 0; } /* Unmaps a buffer from Falcon and clears the buffer table entries */ @@ -449,16 +447,13 @@ int falcon_probe_tx(struct efx_tx_queue *tx_queue) sizeof(efx_qword_t)); } -int falcon_init_tx(struct efx_tx_queue *tx_queue) +void falcon_init_tx(struct efx_tx_queue *tx_queue) { efx_oword_t tx_desc_ptr; struct efx_nic *efx = tx_queue->efx; - int rc; /* Pin TX descriptor ring */ - rc = falcon_init_special_buffer(efx, &tx_queue->txd); - if (rc) - return rc; + falcon_init_special_buffer(efx, &tx_queue->txd); /* Push TX descriptor ring to card */ EFX_POPULATE_OWORD_10(tx_desc_ptr, @@ -466,7 +461,7 @@ int falcon_init_tx(struct efx_tx_queue *tx_queue) TX_ISCSI_DDIG_EN, 0, TX_ISCSI_HDIG_EN, 0, TX_DESCQ_BUF_BASE_ID, tx_queue->txd.index, - TX_DESCQ_EVQ_ID, tx_queue->channel->evqnum, + TX_DESCQ_EVQ_ID, tx_queue->channel->channel, TX_DESCQ_OWNER_ID, 0, TX_DESCQ_LABEL, tx_queue->queue, TX_DESCQ_SIZE, FALCON_TXD_RING_ORDER, @@ -474,9 +469,9 @@ int falcon_init_tx(struct efx_tx_queue *tx_queue) TX_NON_IP_DROP_DIS_B0, 1); if (falcon_rev(efx) >= FALCON_REV_B0) { - int csum = !(efx->net_dev->features & NETIF_F_IP_CSUM); - EFX_SET_OWORD_FIELD(tx_desc_ptr, TX_IP_CHKSM_DIS_B0, csum); - EFX_SET_OWORD_FIELD(tx_desc_ptr, TX_TCP_CHKSM_DIS_B0, csum); + int csum = tx_queue->queue == EFX_TX_QUEUE_OFFLOAD_CSUM; + EFX_SET_OWORD_FIELD(tx_desc_ptr, TX_IP_CHKSM_DIS_B0, !csum); + EFX_SET_OWORD_FIELD(tx_desc_ptr, TX_TCP_CHKSM_DIS_B0, !csum); } falcon_write_table(efx, &tx_desc_ptr, efx->type->txd_ptr_tbl_base, @@ -485,17 +480,16 @@ int falcon_init_tx(struct efx_tx_queue *tx_queue) if (falcon_rev(efx) < FALCON_REV_B0) { efx_oword_t reg; - BUG_ON(tx_queue->queue >= 128); /* HW limit */ + /* Only 128 bits in this register */ + BUILD_BUG_ON(EFX_TX_QUEUE_COUNT >= 128); falcon_read(efx, ®, TX_CHKSM_CFG_REG_KER_A1); - if (efx->net_dev->features & NETIF_F_IP_CSUM) + if (tx_queue->queue == EFX_TX_QUEUE_OFFLOAD_CSUM) clear_bit_le(tx_queue->queue, (void *)®); else set_bit_le(tx_queue->queue, (void *)®); falcon_write(efx, ®, TX_CHKSM_CFG_REG_KER_A1); } - - return 0; } static int falcon_flush_tx_queue(struct efx_tx_queue *tx_queue) @@ -538,7 +532,7 @@ static int falcon_flush_tx_queue(struct efx_tx_queue *tx_queue) if (EFX_WORKAROUND_11557(efx)) { efx_oword_t reg; - int enabled; + bool enabled; falcon_read_table(efx, ®, efx->type->txd_ptr_tbl_base, tx_queue->queue); @@ -638,29 +632,26 @@ int falcon_probe_rx(struct efx_rx_queue *rx_queue) sizeof(efx_qword_t)); } -int falcon_init_rx(struct efx_rx_queue *rx_queue) +void falcon_init_rx(struct efx_rx_queue *rx_queue) { efx_oword_t rx_desc_ptr; struct efx_nic *efx = rx_queue->efx; - int rc; - int is_b0 = falcon_rev(efx) >= FALCON_REV_B0; - int iscsi_digest_en = is_b0; + bool is_b0 = falcon_rev(efx) >= FALCON_REV_B0; + bool iscsi_digest_en = is_b0; EFX_LOG(efx, "RX queue %d ring in special buffers %d-%d\n", rx_queue->queue, rx_queue->rxd.index, rx_queue->rxd.index + rx_queue->rxd.entries - 1); /* Pin RX descriptor ring */ - rc = falcon_init_special_buffer(efx, &rx_queue->rxd); - if (rc) - return rc; + falcon_init_special_buffer(efx, &rx_queue->rxd); /* Push RX descriptor ring to card */ EFX_POPULATE_OWORD_10(rx_desc_ptr, RX_ISCSI_DDIG_EN, iscsi_digest_en, RX_ISCSI_HDIG_EN, iscsi_digest_en, RX_DESCQ_BUF_BASE_ID, rx_queue->rxd.index, - RX_DESCQ_EVQ_ID, rx_queue->channel->evqnum, + RX_DESCQ_EVQ_ID, rx_queue->channel->channel, RX_DESCQ_OWNER_ID, 0, RX_DESCQ_LABEL, rx_queue->queue, RX_DESCQ_SIZE, FALCON_RXD_RING_ORDER, @@ -670,7 +661,6 @@ int falcon_init_rx(struct efx_rx_queue *rx_queue) RX_DESCQ_EN, 1); falcon_write_table(efx, &rx_desc_ptr, efx->type->rxd_ptr_tbl_base, rx_queue->queue); - return 0; } static int falcon_flush_rx_queue(struct efx_rx_queue *rx_queue) @@ -694,7 +684,8 @@ static int falcon_flush_rx_queue(struct efx_rx_queue *rx_queue) read_ptr = channel->eventq_read_ptr; for (i = 0; i < FALCON_EVQ_SIZE; ++i) { efx_qword_t *event = falcon_event(channel, read_ptr); - int ev_code, ev_sub_code, ev_queue, ev_failed; + int ev_code, ev_sub_code, ev_queue; + bool ev_failed; if (!falcon_event_present(event)) break; @@ -721,7 +712,7 @@ static int falcon_flush_rx_queue(struct efx_rx_queue *rx_queue) if (EFX_WORKAROUND_11557(efx)) { efx_oword_t reg; - int enabled; + bool enabled; falcon_read_table(efx, ®, efx->type->rxd_ptr_tbl_base, rx_queue->queue); @@ -793,7 +784,7 @@ void falcon_eventq_read_ack(struct efx_channel *channel) EFX_POPULATE_DWORD_1(reg, EVQ_RPTR_DWORD, channel->eventq_read_ptr); falcon_writel_table(efx, ®, efx->type->evq_rptr_tbl_base, - channel->evqnum); + channel->channel); } /* Use HW to insert a SW defined event */ @@ -802,7 +793,7 @@ void falcon_generate_event(struct efx_channel *channel, efx_qword_t *event) efx_oword_t drv_ev_reg; EFX_POPULATE_OWORD_2(drv_ev_reg, - DRV_EV_QID, channel->evqnum, + DRV_EV_QID, channel->channel, DRV_EV_DATA, EFX_QWORD_FIELD64(*event, WHOLE_EVENT)); falcon_write(channel->efx, &drv_ev_reg, DRV_EV_REG_KER); @@ -813,8 +804,8 @@ void falcon_generate_event(struct efx_channel *channel, efx_qword_t *event) * Falcon batches TX completion events; the message we receive is of * the form "complete all TX events up to this index". */ -static inline void falcon_handle_tx_event(struct efx_channel *channel, - efx_qword_t *event) +static void falcon_handle_tx_event(struct efx_channel *channel, + efx_qword_t *event) { unsigned int tx_ev_desc_ptr; unsigned int tx_ev_q_label; @@ -847,39 +838,19 @@ static inline void falcon_handle_tx_event(struct efx_channel *channel, } } -/* Check received packet's destination MAC address. */ -static int check_dest_mac(struct efx_rx_queue *rx_queue, - const efx_qword_t *event) -{ - struct efx_rx_buffer *rx_buf; - struct efx_nic *efx = rx_queue->efx; - int rx_ev_desc_ptr; - struct ethhdr *eh; - - if (efx->promiscuous) - return 1; - - rx_ev_desc_ptr = EFX_QWORD_FIELD(*event, RX_EV_DESC_PTR); - rx_buf = efx_rx_buffer(rx_queue, rx_ev_desc_ptr); - eh = (struct ethhdr *)rx_buf->data; - if (memcmp(eh->h_dest, efx->net_dev->dev_addr, ETH_ALEN)) - return 0; - return 1; -} - /* Detect errors included in the rx_evt_pkt_ok bit. */ static void falcon_handle_rx_not_ok(struct efx_rx_queue *rx_queue, const efx_qword_t *event, - unsigned *rx_ev_pkt_ok, - int *discard, int byte_count) + bool *rx_ev_pkt_ok, + bool *discard) { struct efx_nic *efx = rx_queue->efx; - unsigned rx_ev_buf_owner_id_err, rx_ev_ip_hdr_chksum_err; - unsigned rx_ev_tcp_udp_chksum_err, rx_ev_eth_crc_err; - unsigned rx_ev_frm_trunc, rx_ev_drib_nib, rx_ev_tobe_disc; - unsigned rx_ev_pkt_type, rx_ev_other_err, rx_ev_pause_frm; - unsigned rx_ev_ip_frag_err, rx_ev_hdr_type, rx_ev_mcast_pkt; - int snap, non_ip; + bool rx_ev_buf_owner_id_err, rx_ev_ip_hdr_chksum_err; + bool rx_ev_tcp_udp_chksum_err, rx_ev_eth_crc_err; + bool rx_ev_frm_trunc, rx_ev_drib_nib, rx_ev_tobe_disc; + bool rx_ev_other_err, rx_ev_pause_frm; + bool rx_ev_ip_frag_err, rx_ev_hdr_type, rx_ev_mcast_pkt; + unsigned rx_ev_pkt_type; rx_ev_hdr_type = EFX_QWORD_FIELD(*event, RX_EV_HDR_TYPE); rx_ev_mcast_pkt = EFX_QWORD_FIELD(*event, RX_EV_MCAST_PKT); @@ -903,41 +874,6 @@ static void falcon_handle_rx_not_ok(struct efx_rx_queue *rx_queue, rx_ev_buf_owner_id_err | rx_ev_eth_crc_err | rx_ev_frm_trunc | rx_ev_ip_hdr_chksum_err); - snap = (rx_ev_pkt_type == RX_EV_PKT_TYPE_LLC_DECODE) || - (rx_ev_pkt_type == RX_EV_PKT_TYPE_VLAN_LLC_DECODE); - non_ip = (rx_ev_hdr_type == RX_EV_HDR_TYPE_NON_IP_DECODE); - - /* SFC bug 5475/8970: The Falcon XMAC incorrectly calculates the - * length field of an LLC frame, which sets TOBE_DISC. We could set - * PASS_LEN_ERR, but we want the MAC to filter out short frames (to - * protect the RX block). - * - * bug5475 - LLC/SNAP: Falcon identifies SNAP packets. - * bug8970 - LLC/noSNAP: Falcon does not provide an LLC flag. - * LLC can't encapsulate IP, so by definition - * these packets are NON_IP. - * - * Unicast mismatch will also cause TOBE_DISC, so the driver needs - * to check this. - */ - if (EFX_WORKAROUND_5475(efx) && rx_ev_tobe_disc && (snap || non_ip)) { - /* If all the other flags are zero then we can state the - * entire packet is ok, which will flag to the kernel not - * to recalculate checksums. - */ - if (!(non_ip | rx_ev_other_err | rx_ev_pause_frm)) - *rx_ev_pkt_ok = 1; - - rx_ev_tobe_disc = 0; - - /* TOBE_DISC is set for unicast mismatch. But given that - * we can't trust TOBE_DISC here, we must validate the dest - * MAC address ourselves. - */ - if (!rx_ev_mcast_pkt && !check_dest_mac(rx_queue, event)) - rx_ev_tobe_disc = 1; - } - /* Count errors that are not in MAC stats. */ if (rx_ev_frm_trunc) ++rx_queue->channel->n_rx_frm_trunc; @@ -961,7 +897,7 @@ static void falcon_handle_rx_not_ok(struct efx_rx_queue *rx_queue, #ifdef EFX_ENABLE_DEBUG if (rx_ev_other_err) { EFX_INFO_RL(efx, " RX queue %d unexpected RX event " - EFX_QWORD_FMT "%s%s%s%s%s%s%s%s%s\n", + EFX_QWORD_FMT "%s%s%s%s%s%s%s%s\n", rx_queue->queue, EFX_QWORD_VAL(*event), rx_ev_buf_owner_id_err ? " [OWNER_ID_ERR]" : "", rx_ev_ip_hdr_chksum_err ? @@ -972,8 +908,7 @@ static void falcon_handle_rx_not_ok(struct efx_rx_queue *rx_queue, rx_ev_frm_trunc ? " [FRM_TRUNC]" : "", rx_ev_drib_nib ? " [DRIB_NIB]" : "", rx_ev_tobe_disc ? " [TOBE_DISC]" : "", - rx_ev_pause_frm ? " [PAUSE]" : "", - snap ? " [SNAP/LLC]" : ""); + rx_ev_pause_frm ? " [PAUSE]" : ""); } #endif @@ -1006,13 +941,13 @@ static void falcon_handle_rx_bad_index(struct efx_rx_queue *rx_queue, * Also "is multicast" and "matches multicast filter" flags can be used to * discard non-matching multicast packets. */ -static inline int falcon_handle_rx_event(struct efx_channel *channel, - const efx_qword_t *event) +static void falcon_handle_rx_event(struct efx_channel *channel, + const efx_qword_t *event) { - unsigned int rx_ev_q_label, rx_ev_desc_ptr, rx_ev_byte_cnt; - unsigned int rx_ev_pkt_ok, rx_ev_hdr_type, rx_ev_mcast_pkt; + unsigned int rx_ev_desc_ptr, rx_ev_byte_cnt; + unsigned int rx_ev_hdr_type, rx_ev_mcast_pkt; unsigned expected_ptr; - int discard = 0, checksummed; + bool rx_ev_pkt_ok, discard = false, checksummed; struct efx_rx_queue *rx_queue; struct efx_nic *efx = channel->efx; @@ -1022,16 +957,14 @@ static inline int falcon_handle_rx_event(struct efx_channel *channel, rx_ev_hdr_type = EFX_QWORD_FIELD(*event, RX_EV_HDR_TYPE); WARN_ON(EFX_QWORD_FIELD(*event, RX_EV_JUMBO_CONT)); WARN_ON(EFX_QWORD_FIELD(*event, RX_EV_SOP) != 1); + WARN_ON(EFX_QWORD_FIELD(*event, RX_EV_Q_LABEL) != channel->channel); - rx_ev_q_label = EFX_QWORD_FIELD(*event, RX_EV_Q_LABEL); - rx_queue = &efx->rx_queue[rx_ev_q_label]; + rx_queue = &efx->rx_queue[channel->channel]; rx_ev_desc_ptr = EFX_QWORD_FIELD(*event, RX_EV_DESC_PTR); expected_ptr = rx_queue->removed_count & FALCON_RXD_RING_MASK; - if (unlikely(rx_ev_desc_ptr != expected_ptr)) { + if (unlikely(rx_ev_desc_ptr != expected_ptr)) falcon_handle_rx_bad_index(rx_queue, rx_ev_desc_ptr); - return rx_ev_q_label; - } if (likely(rx_ev_pkt_ok)) { /* If packet is marked as OK and packet type is TCP/IPv4 or @@ -1040,8 +973,8 @@ static inline int falcon_handle_rx_event(struct efx_channel *channel, checksummed = RX_EV_HDR_TYPE_HAS_CHECKSUMS(rx_ev_hdr_type); } else { falcon_handle_rx_not_ok(rx_queue, event, &rx_ev_pkt_ok, - &discard, rx_ev_byte_cnt); - checksummed = 0; + &discard); + checksummed = false; } /* Detect multicast packets that didn't match the filter */ @@ -1051,14 +984,12 @@ static inline int falcon_handle_rx_event(struct efx_channel *channel, EFX_QWORD_FIELD(*event, RX_EV_MCAST_HASH_MATCH); if (unlikely(!rx_ev_mcast_hash_match)) - discard = 1; + discard = true; } /* Handle received packet */ efx_rx_packet(rx_queue, rx_ev_desc_ptr, rx_ev_byte_cnt, checksummed, discard); - - return rx_ev_q_label; } /* Global events are basically PHY events */ @@ -1066,23 +997,23 @@ static void falcon_handle_global_event(struct efx_channel *channel, efx_qword_t *event) { struct efx_nic *efx = channel->efx; - int is_phy_event = 0, handled = 0; + bool is_phy_event = false, handled = false; /* Check for interrupt on either port. Some boards have a * single PHY wired to the interrupt line for port 1. */ if (EFX_QWORD_FIELD(*event, G_PHY0_INTR) || EFX_QWORD_FIELD(*event, G_PHY1_INTR) || EFX_QWORD_FIELD(*event, XG_PHY_INTR)) - is_phy_event = 1; + is_phy_event = true; if ((falcon_rev(efx) >= FALCON_REV_B0) && EFX_OWORD_FIELD(*event, XG_MNT_INTR_B0)) - is_phy_event = 1; + is_phy_event = true; if (is_phy_event) { efx->phy_op->clear_interrupt(efx); queue_work(efx->workqueue, &efx->reconfigure_work); - handled = 1; + handled = true; } if (EFX_QWORD_FIELD_VER(efx, *event, RX_RECOVERY)) { @@ -1092,7 +1023,7 @@ static void falcon_handle_global_event(struct efx_channel *channel, atomic_inc(&efx->rx_reset); efx_schedule_reset(efx, EFX_WORKAROUND_6555(efx) ? RESET_TYPE_RX_RECOVERY : RESET_TYPE_DISABLE); - handled = 1; + handled = true; } if (!handled) @@ -1163,13 +1094,12 @@ static void falcon_handle_driver_event(struct efx_channel *channel, } } -int falcon_process_eventq(struct efx_channel *channel, int *rx_quota) +int falcon_process_eventq(struct efx_channel *channel, int rx_quota) { unsigned int read_ptr; efx_qword_t event, *p_event; int ev_code; - int rxq; - int rxdmaqs = 0; + int rx_packets = 0; read_ptr = channel->eventq_read_ptr; @@ -1191,9 +1121,8 @@ int falcon_process_eventq(struct efx_channel *channel, int *rx_quota) switch (ev_code) { case RX_IP_EV_DECODE: - rxq = falcon_handle_rx_event(channel, &event); - rxdmaqs |= (1 << rxq); - (*rx_quota)--; + falcon_handle_rx_event(channel, &event); + ++rx_packets; break; case TX_IP_EV_DECODE: falcon_handle_tx_event(channel, &event); @@ -1220,10 +1149,10 @@ int falcon_process_eventq(struct efx_channel *channel, int *rx_quota) /* Increment read pointer */ read_ptr = (read_ptr + 1) & FALCON_EVQ_MASK; - } while (*rx_quota); + } while (rx_packets < rx_quota); channel->eventq_read_ptr = read_ptr; - return rxdmaqs; + return rx_packets; } void falcon_set_int_moderation(struct efx_channel *channel) @@ -1251,7 +1180,7 @@ void falcon_set_int_moderation(struct efx_channel *channel) TIMER_VAL, 0); } falcon_writel_page_locked(efx, &timer_cmd, TIMER_CMD_REG_KER, - channel->evqnum); + channel->channel); } @@ -1265,20 +1194,17 @@ int falcon_probe_eventq(struct efx_channel *channel) return falcon_alloc_special_buffer(efx, &channel->eventq, evq_size); } -int falcon_init_eventq(struct efx_channel *channel) +void falcon_init_eventq(struct efx_channel *channel) { efx_oword_t evq_ptr; struct efx_nic *efx = channel->efx; - int rc; EFX_LOG(efx, "channel %d event queue in special buffers %d-%d\n", channel->channel, channel->eventq.index, channel->eventq.index + channel->eventq.entries - 1); /* Pin event queue buffer */ - rc = falcon_init_special_buffer(efx, &channel->eventq); - if (rc) - return rc; + falcon_init_special_buffer(efx, &channel->eventq); /* Fill event queue with all ones (i.e. empty events) */ memset(channel->eventq.addr, 0xff, channel->eventq.len); @@ -1289,11 +1215,9 @@ int falcon_init_eventq(struct efx_channel *channel) EVQ_SIZE, FALCON_EVQ_ORDER, EVQ_BUF_BASE_ID, channel->eventq.index); falcon_write_table(efx, &evq_ptr, efx->type->evq_ptr_tbl_base, - channel->evqnum); + channel->channel); falcon_set_int_moderation(channel); - - return 0; } void falcon_fini_eventq(struct efx_channel *channel) @@ -1304,7 +1228,7 @@ void falcon_fini_eventq(struct efx_channel *channel) /* Remove event queue from card */ EFX_ZERO_OWORD(eventq_ptr); falcon_write_table(efx, &eventq_ptr, efx->type->evq_ptr_tbl_base, - channel->evqnum); + channel->channel); /* Unpin event queue */ falcon_fini_special_buffer(efx, &channel->eventq); @@ -1371,7 +1295,7 @@ void falcon_enable_interrupts(struct efx_nic *efx) /* Force processing of all the channels to get the EVQ RPTRs up to date */ - efx_for_each_channel_with_interrupt(channel, efx) + efx_for_each_channel(channel, efx) efx_schedule_channel(channel); } @@ -1589,7 +1513,7 @@ static void falcon_setup_rss_indir_table(struct efx_nic *efx) offset < RX_RSS_INDIR_TBL_B0 + 0x800; offset += 0x10) { EFX_POPULATE_DWORD_1(dword, RX_RSS_INDIR_ENT_B0, - i % efx->rss_queues); + i % efx->n_rx_queues); falcon_writel(efx, &dword, offset); i++; } @@ -1621,7 +1545,7 @@ int falcon_init_interrupt(struct efx_nic *efx) } /* Hook MSI or MSI-X interrupt */ - efx_for_each_channel_with_interrupt(channel, efx) { + efx_for_each_channel(channel, efx) { rc = request_irq(channel->irq, falcon_msi_interrupt, IRQF_PROBE_SHARED, /* Not shared */ efx->name, channel); @@ -1634,7 +1558,7 @@ int falcon_init_interrupt(struct efx_nic *efx) return 0; fail2: - efx_for_each_channel_with_interrupt(channel, efx) + efx_for_each_channel(channel, efx) free_irq(channel->irq, channel); fail1: return rc; @@ -1646,7 +1570,7 @@ void falcon_fini_interrupt(struct efx_nic *efx) efx_oword_t reg; /* Disable MSI/MSI-X interrupts */ - efx_for_each_channel_with_interrupt(channel, efx) { + efx_for_each_channel(channel, efx) { if (channel->irq) free_irq(channel->irq, channel); } @@ -1674,64 +1598,195 @@ void falcon_fini_interrupt(struct efx_nic *efx) /* Wait for SPI command completion */ static int falcon_spi_wait(struct efx_nic *efx) { + unsigned long timeout = jiffies + DIV_ROUND_UP(HZ, 10); efx_oword_t reg; - int cmd_en, timer_active; - int count; + bool cmd_en, timer_active; - count = 0; - do { + for (;;) { falcon_read(efx, ®, EE_SPI_HCMD_REG_KER); cmd_en = EFX_OWORD_FIELD(reg, EE_SPI_HCMD_CMD_EN); timer_active = EFX_OWORD_FIELD(reg, EE_WR_TIMER_ACTIVE); if (!cmd_en && !timer_active) return 0; - udelay(10); - } while (++count < 10000); /* wait upto 100msec */ - EFX_ERR(efx, "timed out waiting for SPI\n"); - return -ETIMEDOUT; + if (time_after_eq(jiffies, timeout)) { + EFX_ERR(efx, "timed out waiting for SPI\n"); + return -ETIMEDOUT; + } + cpu_relax(); + } } -static int -falcon_spi_read(struct efx_nic *efx, int device_id, unsigned int command, - unsigned int address, unsigned int addr_len, - void *data, unsigned int len) +static int falcon_spi_cmd(const struct efx_spi_device *spi, + unsigned int command, int address, + const void *in, void *out, unsigned int len) { + struct efx_nic *efx = spi->efx; + bool addressed = (address >= 0); + bool reading = (out != NULL); efx_oword_t reg; int rc; - BUG_ON(len > FALCON_SPI_MAX_LEN); + /* Input validation */ + if (len > FALCON_SPI_MAX_LEN) + return -EINVAL; /* Check SPI not currently being accessed */ rc = falcon_spi_wait(efx); if (rc) return rc; - /* Program address register */ - EFX_POPULATE_OWORD_1(reg, EE_SPI_HADR_ADR, address); - falcon_write(efx, ®, EE_SPI_HADR_REG_KER); + /* Program address register, if we have an address */ + if (addressed) { + EFX_POPULATE_OWORD_1(reg, EE_SPI_HADR_ADR, address); + falcon_write(efx, ®, EE_SPI_HADR_REG_KER); + } + + /* Program data register, if we have data */ + if (in != NULL) { + memcpy(®, in, len); + falcon_write(efx, ®, EE_SPI_HDATA_REG_KER); + } - /* Issue read command */ + /* Issue read/write command */ EFX_POPULATE_OWORD_7(reg, EE_SPI_HCMD_CMD_EN, 1, - EE_SPI_HCMD_SF_SEL, device_id, + EE_SPI_HCMD_SF_SEL, spi->device_id, EE_SPI_HCMD_DABCNT, len, - EE_SPI_HCMD_READ, EE_SPI_READ, + EE_SPI_HCMD_READ, reading, EE_SPI_HCMD_DUBCNT, 0, - EE_SPI_HCMD_ADBCNT, addr_len, + EE_SPI_HCMD_ADBCNT, + (addressed ? spi->addr_len : 0), EE_SPI_HCMD_ENC, command); falcon_write(efx, ®, EE_SPI_HCMD_REG_KER); - /* Wait for read to complete */ + /* Wait for read/write to complete */ rc = falcon_spi_wait(efx); if (rc) return rc; /* Read data */ - falcon_read(efx, ®, EE_SPI_HDATA_REG_KER); - memcpy(data, ®, len); + if (out != NULL) { + falcon_read(efx, ®, EE_SPI_HDATA_REG_KER); + memcpy(out, ®, len); + } + return 0; } +static unsigned int +falcon_spi_write_limit(const struct efx_spi_device *spi, unsigned int start) +{ + return min(FALCON_SPI_MAX_LEN, + (spi->block_size - (start & (spi->block_size - 1)))); +} + +static inline u8 +efx_spi_munge_command(const struct efx_spi_device *spi, + const u8 command, const unsigned int address) +{ + return command | (((address >> 8) & spi->munge_address) << 3); +} + + +static int falcon_spi_fast_wait(const struct efx_spi_device *spi) +{ + u8 status; + int i, rc; + + /* Wait up to 1000us for flash/EEPROM to finish a fast operation. */ + for (i = 0; i < 50; i++) { + udelay(20); + + rc = falcon_spi_cmd(spi, SPI_RDSR, -1, NULL, + &status, sizeof(status)); + if (rc) + return rc; + if (!(status & SPI_STATUS_NRDY)) + return 0; + } + EFX_ERR(spi->efx, + "timed out waiting for device %d last status=0x%02x\n", + spi->device_id, status); + return -ETIMEDOUT; +} + +int falcon_spi_read(const struct efx_spi_device *spi, loff_t start, + size_t len, size_t *retlen, u8 *buffer) +{ + unsigned int command, block_len, pos = 0; + int rc = 0; + + while (pos < len) { + block_len = min((unsigned int)len - pos, + FALCON_SPI_MAX_LEN); + + command = efx_spi_munge_command(spi, SPI_READ, start + pos); + rc = falcon_spi_cmd(spi, command, start + pos, NULL, + buffer + pos, block_len); + if (rc) + break; + pos += block_len; + + /* Avoid locking up the system */ + cond_resched(); + if (signal_pending(current)) { + rc = -EINTR; + break; + } + } + + if (retlen) + *retlen = pos; + return rc; +} + +int falcon_spi_write(const struct efx_spi_device *spi, loff_t start, + size_t len, size_t *retlen, const u8 *buffer) +{ + u8 verify_buffer[FALCON_SPI_MAX_LEN]; + unsigned int command, block_len, pos = 0; + int rc = 0; + + while (pos < len) { + rc = falcon_spi_cmd(spi, SPI_WREN, -1, NULL, NULL, 0); + if (rc) + break; + + block_len = min((unsigned int)len - pos, + falcon_spi_write_limit(spi, start + pos)); + command = efx_spi_munge_command(spi, SPI_WRITE, start + pos); + rc = falcon_spi_cmd(spi, command, start + pos, + buffer + pos, NULL, block_len); + if (rc) + break; + + rc = falcon_spi_fast_wait(spi); + if (rc) + break; + + command = efx_spi_munge_command(spi, SPI_READ, start + pos); + rc = falcon_spi_cmd(spi, command, start + pos, + NULL, verify_buffer, block_len); + if (memcmp(verify_buffer, buffer + pos, block_len)) { + rc = -EIO; + break; + } + + pos += block_len; + + /* Avoid locking up the system */ + cond_resched(); + if (signal_pending(current)) { + rc = -EINTR; + break; + } + } + + if (retlen) + *retlen = pos; + return rc; +} + /************************************************************************** * * MAC wrapper @@ -1812,7 +1867,7 @@ void falcon_reconfigure_mac_wrapper(struct efx_nic *efx) { efx_oword_t reg; int link_speed; - unsigned int tx_fc; + bool tx_fc; if (efx->link_options & GM_LPA_10000) link_speed = 0x3; @@ -1847,7 +1902,7 @@ void falcon_reconfigure_mac_wrapper(struct efx_nic *efx) /* Transmission of pause frames when RX crosses the threshold is * covered by RX_XOFF_MAC_EN and XM_TX_CFG_REG:XM_FCNTL. * Action on receipt of pause frames is controller by XM_DIS_FCNTL */ - tx_fc = (efx->flow_control & EFX_FC_TX) ? 1 : 0; + tx_fc = !!(efx->flow_control & EFX_FC_TX); falcon_read(efx, ®, RX_CFG_REG_KER); EFX_SET_OWORD_FIELD_VER(efx, reg, RX_XOFF_MAC_EN, tx_fc); @@ -1951,7 +2006,7 @@ static int falcon_gmii_wait(struct efx_nic *efx) static void falcon_mdio_write(struct net_device *net_dev, int phy_id, int addr, int value) { - struct efx_nic *efx = net_dev->priv; + struct efx_nic *efx = netdev_priv(net_dev); unsigned int phy_id2 = phy_id & FALCON_PHY_ID_ID_MASK; efx_oword_t reg; @@ -2019,7 +2074,7 @@ static void falcon_mdio_write(struct net_device *net_dev, int phy_id, * could be read, -1 will be returned. */ static int falcon_mdio_read(struct net_device *net_dev, int phy_id, int addr) { - struct efx_nic *efx = net_dev->priv; + struct efx_nic *efx = netdev_priv(net_dev); unsigned int phy_addr = phy_id & FALCON_PHY_ID_ID_MASK; efx_oword_t reg; int value = -1; @@ -2120,7 +2175,7 @@ int falcon_probe_port(struct efx_nic *efx) return rc; /* Set up GMII structure for PHY */ - efx->mii.supports_gmii = 1; + efx->mii.supports_gmii = true; falcon_init_mdio(&efx->mii); /* Hardware flow ctrl. FalconA RX FIFO too small for pause generation */ @@ -2168,6 +2223,170 @@ void falcon_set_multicast_hash(struct efx_nic *efx) falcon_write(efx, &mc_hash->oword[1], MAC_MCAST_HASH_REG1_KER); } + +/************************************************************************** + * + * Falcon test code + * + **************************************************************************/ + +int falcon_read_nvram(struct efx_nic *efx, struct falcon_nvconfig *nvconfig_out) +{ + struct falcon_nvconfig *nvconfig; + struct efx_spi_device *spi; + void *region; + int rc, magic_num, struct_ver; + __le16 *word, *limit; + u32 csum; + + region = kmalloc(NVCONFIG_END, GFP_KERNEL); + if (!region) + return -ENOMEM; + nvconfig = region + NVCONFIG_OFFSET; + + spi = efx->spi_flash ? efx->spi_flash : efx->spi_eeprom; + rc = falcon_spi_read(spi, 0, NVCONFIG_END, NULL, region); + if (rc) { + EFX_ERR(efx, "Failed to read %s\n", + efx->spi_flash ? "flash" : "EEPROM"); + rc = -EIO; + goto out; + } + + magic_num = le16_to_cpu(nvconfig->board_magic_num); + struct_ver = le16_to_cpu(nvconfig->board_struct_ver); + + rc = -EINVAL; + if (magic_num != NVCONFIG_BOARD_MAGIC_NUM) { + EFX_ERR(efx, "NVRAM bad magic 0x%x\n", magic_num); + goto out; + } + if (struct_ver < 2) { + EFX_ERR(efx, "NVRAM has ancient version 0x%x\n", struct_ver); + goto out; + } else if (struct_ver < 4) { + word = &nvconfig->board_magic_num; + limit = (__le16 *) (nvconfig + 1); + } else { + word = region; + limit = region + NVCONFIG_END; + } + for (csum = 0; word < limit; ++word) + csum += le16_to_cpu(*word); + + if (~csum & 0xffff) { + EFX_ERR(efx, "NVRAM has incorrect checksum\n"); + goto out; + } + + rc = 0; + if (nvconfig_out) + memcpy(nvconfig_out, nvconfig, sizeof(*nvconfig)); + + out: + kfree(region); + return rc; +} + +/* Registers tested in the falcon register test */ +static struct { + unsigned address; + efx_oword_t mask; +} efx_test_registers[] = { + { ADR_REGION_REG_KER, + EFX_OWORD32(0x0001FFFF, 0x0001FFFF, 0x0001FFFF, 0x0001FFFF) }, + { RX_CFG_REG_KER, + EFX_OWORD32(0xFFFFFFFE, 0x00017FFF, 0x00000000, 0x00000000) }, + { TX_CFG_REG_KER, + EFX_OWORD32(0x7FFF0037, 0x00000000, 0x00000000, 0x00000000) }, + { TX_CFG2_REG_KER, + EFX_OWORD32(0xFFFEFE80, 0x1FFFFFFF, 0x020000FE, 0x007FFFFF) }, + { MAC0_CTRL_REG_KER, + EFX_OWORD32(0xFFFF0000, 0x00000000, 0x00000000, 0x00000000) }, + { SRM_TX_DC_CFG_REG_KER, + EFX_OWORD32(0x001FFFFF, 0x00000000, 0x00000000, 0x00000000) }, + { RX_DC_CFG_REG_KER, + EFX_OWORD32(0x0000000F, 0x00000000, 0x00000000, 0x00000000) }, + { RX_DC_PF_WM_REG_KER, + EFX_OWORD32(0x000003FF, 0x00000000, 0x00000000, 0x00000000) }, + { DP_CTRL_REG, + EFX_OWORD32(0x00000FFF, 0x00000000, 0x00000000, 0x00000000) }, + { XM_GLB_CFG_REG, + EFX_OWORD32(0x00000C68, 0x00000000, 0x00000000, 0x00000000) }, + { XM_TX_CFG_REG, + EFX_OWORD32(0x00080164, 0x00000000, 0x00000000, 0x00000000) }, + { XM_RX_CFG_REG, + EFX_OWORD32(0x07100A0C, 0x00000000, 0x00000000, 0x00000000) }, + { XM_RX_PARAM_REG, + EFX_OWORD32(0x00001FF8, 0x00000000, 0x00000000, 0x00000000) }, + { XM_FC_REG, + EFX_OWORD32(0xFFFF0001, 0x00000000, 0x00000000, 0x00000000) }, + { XM_ADR_LO_REG, + EFX_OWORD32(0xFFFFFFFF, 0x00000000, 0x00000000, 0x00000000) }, + { XX_SD_CTL_REG, + EFX_OWORD32(0x0003FF0F, 0x00000000, 0x00000000, 0x00000000) }, +}; + +static bool efx_masked_compare_oword(const efx_oword_t *a, const efx_oword_t *b, + const efx_oword_t *mask) +{ + return ((a->u64[0] ^ b->u64[0]) & mask->u64[0]) || + ((a->u64[1] ^ b->u64[1]) & mask->u64[1]); +} + +int falcon_test_registers(struct efx_nic *efx) +{ + unsigned address = 0, i, j; + efx_oword_t mask, imask, original, reg, buf; + + /* Falcon should be in loopback to isolate the XMAC from the PHY */ + WARN_ON(!LOOPBACK_INTERNAL(efx)); + + for (i = 0; i < ARRAY_SIZE(efx_test_registers); ++i) { + address = efx_test_registers[i].address; + mask = imask = efx_test_registers[i].mask; + EFX_INVERT_OWORD(imask); + + falcon_read(efx, &original, address); + + /* bit sweep on and off */ + for (j = 0; j < 128; j++) { + if (!EFX_EXTRACT_OWORD32(mask, j, j)) + continue; + + /* Test this testable bit can be set in isolation */ + EFX_AND_OWORD(reg, original, mask); + EFX_SET_OWORD32(reg, j, j, 1); + + falcon_write(efx, ®, address); + falcon_read(efx, &buf, address); + + if (efx_masked_compare_oword(®, &buf, &mask)) + goto fail; + + /* Test this testable bit can be cleared in isolation */ + EFX_OR_OWORD(reg, original, mask); + EFX_SET_OWORD32(reg, j, j, 0); + + falcon_write(efx, ®, address); + falcon_read(efx, &buf, address); + + if (efx_masked_compare_oword(®, &buf, &mask)) + goto fail; + } + + falcon_write(efx, &original, address); + } + + return 0; + +fail: + EFX_ERR(efx, "wrote "EFX_OWORD_FMT" read "EFX_OWORD_FMT + " at address 0x%x mask "EFX_OWORD_FMT"\n", EFX_OWORD_VAL(reg), + EFX_OWORD_VAL(buf), address, EFX_OWORD_VAL(mask)); + return -EIO; +} + /************************************************************************** * * Device reset @@ -2305,68 +2524,103 @@ static int falcon_reset_sram(struct efx_nic *efx) return -ETIMEDOUT; } +static int falcon_spi_device_init(struct efx_nic *efx, + struct efx_spi_device **spi_device_ret, + unsigned int device_id, u32 device_type) +{ + struct efx_spi_device *spi_device; + + if (device_type != 0) { + spi_device = kmalloc(sizeof(*spi_device), GFP_KERNEL); + if (!spi_device) + return -ENOMEM; + spi_device->device_id = device_id; + spi_device->size = + 1 << SPI_DEV_TYPE_FIELD(device_type, SPI_DEV_TYPE_SIZE); + spi_device->addr_len = + SPI_DEV_TYPE_FIELD(device_type, SPI_DEV_TYPE_ADDR_LEN); + spi_device->munge_address = (spi_device->size == 1 << 9 && + spi_device->addr_len == 1); + spi_device->block_size = + 1 << SPI_DEV_TYPE_FIELD(device_type, + SPI_DEV_TYPE_BLOCK_SIZE); + + spi_device->efx = efx; + } else { + spi_device = NULL; + } + + kfree(*spi_device_ret); + *spi_device_ret = spi_device; + return 0; +} + + +static void falcon_remove_spi_devices(struct efx_nic *efx) +{ + kfree(efx->spi_eeprom); + efx->spi_eeprom = NULL; + kfree(efx->spi_flash); + efx->spi_flash = NULL; +} + /* Extract non-volatile configuration */ static int falcon_probe_nvconfig(struct efx_nic *efx) { struct falcon_nvconfig *nvconfig; - efx_oword_t nic_stat; - int device_id; - unsigned addr_len; - size_t offset, len; - int magic_num, struct_ver, board_rev; + int board_rev; int rc; - /* Find the boot device. */ - falcon_read(efx, &nic_stat, NIC_STAT_REG); - if (EFX_OWORD_FIELD(nic_stat, SF_PRST)) { - device_id = EE_SPI_FLASH; - addr_len = 3; - } else if (EFX_OWORD_FIELD(nic_stat, EE_PRST)) { - device_id = EE_SPI_EEPROM; - addr_len = 2; - } else { - return -ENODEV; - } - nvconfig = kmalloc(sizeof(*nvconfig), GFP_KERNEL); + if (!nvconfig) + return -ENOMEM; - /* Read the whole configuration structure into memory. */ - for (offset = 0; offset < sizeof(*nvconfig); offset += len) { - len = min(sizeof(*nvconfig) - offset, - (size_t) FALCON_SPI_MAX_LEN); - rc = falcon_spi_read(efx, device_id, SPI_READ, - NVCONFIG_BASE + offset, addr_len, - (char *)nvconfig + offset, len); - if (rc) - goto out; - } - - /* Read the MAC addresses */ - memcpy(efx->mac_address, nvconfig->mac_address[0], ETH_ALEN); - - /* Read the board configuration. */ - magic_num = le16_to_cpu(nvconfig->board_magic_num); - struct_ver = le16_to_cpu(nvconfig->board_struct_ver); - - if (magic_num != NVCONFIG_BOARD_MAGIC_NUM || struct_ver < 2) { - EFX_ERR(efx, "Non volatile memory bad magic=%x ver=%x " - "therefore using defaults\n", magic_num, struct_ver); + rc = falcon_read_nvram(efx, nvconfig); + if (rc == -EINVAL) { + EFX_ERR(efx, "NVRAM is invalid therefore using defaults\n"); efx->phy_type = PHY_TYPE_NONE; efx->mii.phy_id = PHY_ADDR_INVALID; board_rev = 0; + rc = 0; + } else if (rc) { + goto fail1; } else { struct falcon_nvconfig_board_v2 *v2 = &nvconfig->board_v2; + struct falcon_nvconfig_board_v3 *v3 = &nvconfig->board_v3; efx->phy_type = v2->port0_phy_type; efx->mii.phy_id = v2->port0_phy_addr; board_rev = le16_to_cpu(v2->board_revision); + + if (le16_to_cpu(nvconfig->board_struct_ver) >= 3) { + __le32 fl = v3->spi_device_type[EE_SPI_FLASH]; + __le32 ee = v3->spi_device_type[EE_SPI_EEPROM]; + rc = falcon_spi_device_init(efx, &efx->spi_flash, + EE_SPI_FLASH, + le32_to_cpu(fl)); + if (rc) + goto fail2; + rc = falcon_spi_device_init(efx, &efx->spi_eeprom, + EE_SPI_EEPROM, + le32_to_cpu(ee)); + if (rc) + goto fail2; + } } + /* Read the MAC addresses */ + memcpy(efx->mac_address, nvconfig->mac_address[0], ETH_ALEN); + EFX_LOG(efx, "PHY is %d phy_id %d\n", efx->phy_type, efx->mii.phy_id); efx_set_board_info(efx, board_rev); - out: + kfree(nvconfig); + return 0; + + fail2: + falcon_remove_spi_devices(efx); + fail1: kfree(nvconfig); return rc; } @@ -2417,6 +2671,86 @@ static int falcon_probe_nic_variant(struct efx_nic *efx) return 0; } +/* Probe all SPI devices on the NIC */ +static void falcon_probe_spi_devices(struct efx_nic *efx) +{ + efx_oword_t nic_stat, gpio_ctl, ee_vpd_cfg; + bool has_flash, has_eeprom, boot_is_external; + + falcon_read(efx, &gpio_ctl, GPIO_CTL_REG_KER); + falcon_read(efx, &nic_stat, NIC_STAT_REG); + falcon_read(efx, &ee_vpd_cfg, EE_VPD_CFG_REG_KER); + + has_flash = EFX_OWORD_FIELD(nic_stat, SF_PRST); + has_eeprom = EFX_OWORD_FIELD(nic_stat, EE_PRST); + boot_is_external = EFX_OWORD_FIELD(gpio_ctl, BOOTED_USING_NVDEVICE); + + if (has_flash) { + /* Default flash SPI device: Atmel AT25F1024 + * 128 KB, 24-bit address, 32 KB erase block, + * 256 B write block + */ + u32 flash_device_type = + (17 << SPI_DEV_TYPE_SIZE_LBN) + | (3 << SPI_DEV_TYPE_ADDR_LEN_LBN) + | (0x52 << SPI_DEV_TYPE_ERASE_CMD_LBN) + | (15 << SPI_DEV_TYPE_ERASE_SIZE_LBN) + | (8 << SPI_DEV_TYPE_BLOCK_SIZE_LBN); + + falcon_spi_device_init(efx, &efx->spi_flash, + EE_SPI_FLASH, flash_device_type); + + if (!boot_is_external) { + /* Disable VPD and set clock dividers to safe + * values for initial programming. + */ + EFX_LOG(efx, "Booted from internal ASIC settings;" + " setting SPI config\n"); + EFX_POPULATE_OWORD_3(ee_vpd_cfg, EE_VPD_EN, 0, + /* 125 MHz / 7 ~= 20 MHz */ + EE_SF_CLOCK_DIV, 7, + /* 125 MHz / 63 ~= 2 MHz */ + EE_EE_CLOCK_DIV, 63); + falcon_write(efx, &ee_vpd_cfg, EE_VPD_CFG_REG_KER); + } + } + + if (has_eeprom) { + u32 eeprom_device_type; + + /* If it has no flash, it must have a large EEPROM + * for chip config; otherwise check whether 9-bit + * addressing is used for VPD configuration + */ + if (has_flash && + (!boot_is_external || + EFX_OWORD_FIELD(ee_vpd_cfg, EE_VPD_EN_AD9_MODE))) { + /* Default SPI device: Atmel AT25040 or similar + * 512 B, 9-bit address, 8 B write block + */ + eeprom_device_type = + (9 << SPI_DEV_TYPE_SIZE_LBN) + | (1 << SPI_DEV_TYPE_ADDR_LEN_LBN) + | (3 << SPI_DEV_TYPE_BLOCK_SIZE_LBN); + } else { + /* "Large" SPI device: Atmel AT25640 or similar + * 8 KB, 16-bit address, 32 B write block + */ + eeprom_device_type = + (13 << SPI_DEV_TYPE_SIZE_LBN) + | (2 << SPI_DEV_TYPE_ADDR_LEN_LBN) + | (5 << SPI_DEV_TYPE_BLOCK_SIZE_LBN); + } + + falcon_spi_device_init(efx, &efx->spi_eeprom, + EE_SPI_EEPROM, eeprom_device_type); + } + + EFX_LOG(efx, "flash is %s, EEPROM is %s\n", + (has_flash ? "present" : "absent"), + (has_eeprom ? "present" : "absent")); +} + int falcon_probe_nic(struct efx_nic *efx) { struct falcon_nic_data *nic_data; @@ -2467,6 +2801,8 @@ int falcon_probe_nic(struct efx_nic *efx) (unsigned long long)efx->irq_status.dma_addr, efx->irq_status.addr, virt_to_phys(efx->irq_status.addr)); + falcon_probe_spi_devices(efx); + /* Read in the non-volatile configuration */ rc = falcon_probe_nvconfig(efx); if (rc) @@ -2486,6 +2822,7 @@ int falcon_probe_nic(struct efx_nic *efx) return 0; fail5: + falcon_remove_spi_devices(efx); falcon_free_buffer(efx, &efx->irq_status); fail4: fail3: @@ -2573,19 +2910,14 @@ int falcon_init_nic(struct efx_nic *efx) EFX_INVERT_OWORD(temp); falcon_write(efx, &temp, FATAL_INTR_REG_KER); - /* Set number of RSS queues for receive path. */ - falcon_read(efx, &temp, RX_FILTER_CTL_REG); - if (falcon_rev(efx) >= FALCON_REV_B0) - EFX_SET_OWORD_FIELD(temp, NUM_KER, 0); - else - EFX_SET_OWORD_FIELD(temp, NUM_KER, efx->rss_queues - 1); if (EFX_WORKAROUND_7244(efx)) { + falcon_read(efx, &temp, RX_FILTER_CTL_REG); EFX_SET_OWORD_FIELD(temp, UDP_FULL_SRCH_LIMIT, 8); EFX_SET_OWORD_FIELD(temp, UDP_WILD_SRCH_LIMIT, 8); EFX_SET_OWORD_FIELD(temp, TCP_FULL_SRCH_LIMIT, 8); EFX_SET_OWORD_FIELD(temp, TCP_WILD_SRCH_LIMIT, 8); + falcon_write(efx, &temp, RX_FILTER_CTL_REG); } - falcon_write(efx, &temp, RX_FILTER_CTL_REG); falcon_setup_rss_indir_table(efx); @@ -2641,8 +2973,8 @@ int falcon_init_nic(struct efx_nic *efx) rx_xoff_thresh_bytes : efx->type->rx_xoff_thresh); EFX_SET_OWORD_FIELD_VER(efx, temp, RX_XOFF_MAC_TH, thresh / 256); /* RX control FIFO thresholds [32 entries] */ - EFX_SET_OWORD_FIELD_VER(efx, temp, RX_XON_TX_TH, 25); - EFX_SET_OWORD_FIELD_VER(efx, temp, RX_XOFF_TX_TH, 20); + EFX_SET_OWORD_FIELD_VER(efx, temp, RX_XON_TX_TH, 20); + EFX_SET_OWORD_FIELD_VER(efx, temp, RX_XOFF_TX_TH, 25); falcon_write(efx, &temp, RX_CFG_REG_KER); /* Set destination of both TX and RX Flush events */ @@ -2662,6 +2994,7 @@ void falcon_remove_nic(struct efx_nic *efx) rc = i2c_del_adapter(&efx->i2c_adap); BUG_ON(rc); + falcon_remove_spi_devices(efx); falcon_free_buffer(efx, &efx->irq_status); falcon_reset_hw(efx, RESET_TYPE_ALL); diff --git a/drivers/net/sfc/falcon.h b/drivers/net/sfc/falcon.h index 492f9bc2884..30d61e48ac6 100644 --- a/drivers/net/sfc/falcon.h +++ b/drivers/net/sfc/falcon.h @@ -40,24 +40,24 @@ extern struct efx_nic_type falcon_b_nic_type; /* TX data path */ extern int falcon_probe_tx(struct efx_tx_queue *tx_queue); -extern int falcon_init_tx(struct efx_tx_queue *tx_queue); +extern void falcon_init_tx(struct efx_tx_queue *tx_queue); extern void falcon_fini_tx(struct efx_tx_queue *tx_queue); extern void falcon_remove_tx(struct efx_tx_queue *tx_queue); extern void falcon_push_buffers(struct efx_tx_queue *tx_queue); /* RX data path */ extern int falcon_probe_rx(struct efx_rx_queue *rx_queue); -extern int falcon_init_rx(struct efx_rx_queue *rx_queue); +extern void falcon_init_rx(struct efx_rx_queue *rx_queue); extern void falcon_fini_rx(struct efx_rx_queue *rx_queue); extern void falcon_remove_rx(struct efx_rx_queue *rx_queue); extern void falcon_notify_rx_desc(struct efx_rx_queue *rx_queue); /* Event data path */ extern int falcon_probe_eventq(struct efx_channel *channel); -extern int falcon_init_eventq(struct efx_channel *channel); +extern void falcon_init_eventq(struct efx_channel *channel); extern void falcon_fini_eventq(struct efx_channel *channel); extern void falcon_remove_eventq(struct efx_channel *channel); -extern int falcon_process_eventq(struct efx_channel *channel, int *rx_quota); +extern int falcon_process_eventq(struct efx_channel *channel, int rx_quota); extern void falcon_eventq_read_ack(struct efx_channel *channel); /* Ports */ @@ -65,7 +65,7 @@ extern int falcon_probe_port(struct efx_nic *efx); extern void falcon_remove_port(struct efx_nic *efx); /* MAC/PHY */ -extern int falcon_xaui_link_ok(struct efx_nic *efx); +extern bool falcon_xaui_link_ok(struct efx_nic *efx); extern int falcon_dma_stats(struct efx_nic *efx, unsigned int done_offset); extern void falcon_drain_tx_fifo(struct efx_nic *efx); @@ -93,6 +93,12 @@ extern void falcon_update_nic_stats(struct efx_nic *efx); extern void falcon_set_multicast_hash(struct efx_nic *efx); extern int falcon_reset_xaui(struct efx_nic *efx); +/* Tests */ +struct falcon_nvconfig; +extern int falcon_read_nvram(struct efx_nic *efx, + struct falcon_nvconfig *nvconfig); +extern int falcon_test_registers(struct efx_nic *efx); + /************************************************************************** * * Falcon MAC stats diff --git a/drivers/net/sfc/falcon_hwdefs.h b/drivers/net/sfc/falcon_hwdefs.h index 6d003114eea..e319fd64d07 100644 --- a/drivers/net/sfc/falcon_hwdefs.h +++ b/drivers/net/sfc/falcon_hwdefs.h @@ -92,6 +92,17 @@ /* SPI host data register */ #define EE_SPI_HDATA_REG_KER 0x0120 +/* SPI/VPD config register */ +#define EE_VPD_CFG_REG_KER 0x0140 +#define EE_VPD_EN_LBN 0 +#define EE_VPD_EN_WIDTH 1 +#define EE_VPD_EN_AD9_MODE_LBN 1 +#define EE_VPD_EN_AD9_MODE_WIDTH 1 +#define EE_EE_CLOCK_DIV_LBN 112 +#define EE_EE_CLOCK_DIV_WIDTH 7 +#define EE_SF_CLOCK_DIV_LBN 120 +#define EE_SF_CLOCK_DIV_WIDTH 7 + /* PCIE CORE ACCESS REG */ #define PCIE_CORE_ADDR_PCIE_DEVICE_CTRL_STAT 0x68 #define PCIE_CORE_ADDR_PCIE_LINK_CTRL_STAT 0x70 @@ -115,6 +126,9 @@ #define STRAP_PCIE_LBN 0 #define STRAP_PCIE_WIDTH 1 +#define BOOTED_USING_NVDEVICE_LBN 3 +#define BOOTED_USING_NVDEVICE_WIDTH 1 + /* GPIO control register */ #define GPIO_CTL_REG_KER 0x0210 #define GPIO_OUTPUTS_LBN (16) @@ -479,18 +493,8 @@ #define MAC_MCAST_HASH_REG0_KER 0xca0 #define MAC_MCAST_HASH_REG1_KER 0xcb0 -/* GMAC registers */ -#define FALCON_GMAC_REGBANK 0xe00 -#define FALCON_GMAC_REGBANK_SIZE 0x200 -#define FALCON_GMAC_REG_SIZE 0x10 - -/* XMAC registers */ -#define FALCON_XMAC_REGBANK 0x1200 -#define FALCON_XMAC_REGBANK_SIZE 0x200 -#define FALCON_XMAC_REG_SIZE 0x10 - /* XGMAC address register low */ -#define XM_ADR_LO_REG_MAC 0x00 +#define XM_ADR_LO_REG 0x1200 #define XM_ADR_3_LBN 24 #define XM_ADR_3_WIDTH 8 #define XM_ADR_2_LBN 16 @@ -501,14 +505,14 @@ #define XM_ADR_0_WIDTH 8 /* XGMAC address register high */ -#define XM_ADR_HI_REG_MAC 0x01 +#define XM_ADR_HI_REG 0x1210 #define XM_ADR_5_LBN 8 #define XM_ADR_5_WIDTH 8 #define XM_ADR_4_LBN 0 #define XM_ADR_4_WIDTH 8 /* XGMAC global configuration */ -#define XM_GLB_CFG_REG_MAC 0x02 +#define XM_GLB_CFG_REG 0x1220 #define XM_RX_STAT_EN_LBN 11 #define XM_RX_STAT_EN_WIDTH 1 #define XM_TX_STAT_EN_LBN 10 @@ -521,7 +525,7 @@ #define XM_CORE_RST_WIDTH 1 /* XGMAC transmit configuration */ -#define XM_TX_CFG_REG_MAC 0x03 +#define XM_TX_CFG_REG 0x1230 #define XM_IPG_LBN 16 #define XM_IPG_WIDTH 4 #define XM_FCNTL_LBN 10 @@ -536,7 +540,7 @@ #define XM_TXEN_WIDTH 1 /* XGMAC receive configuration */ -#define XM_RX_CFG_REG_MAC 0x04 +#define XM_RX_CFG_REG 0x1240 #define XM_PASS_CRC_ERR_LBN 25 #define XM_PASS_CRC_ERR_WIDTH 1 #define XM_ACPT_ALL_MCAST_LBN 11 @@ -549,7 +553,7 @@ #define XM_RXEN_WIDTH 1 /* XGMAC management interrupt mask register */ -#define XM_MGT_INT_MSK_REG_MAC_B0 0x5 +#define XM_MGT_INT_MSK_REG_B0 0x1250 #define XM_MSK_PRMBLE_ERR_LBN 2 #define XM_MSK_PRMBLE_ERR_WIDTH 1 #define XM_MSK_RMTFLT_LBN 1 @@ -558,29 +562,29 @@ #define XM_MSK_LCLFLT_WIDTH 1 /* XGMAC flow control register */ -#define XM_FC_REG_MAC 0x7 +#define XM_FC_REG 0x1270 #define XM_PAUSE_TIME_LBN 16 #define XM_PAUSE_TIME_WIDTH 16 #define XM_DIS_FCNTL_LBN 0 #define XM_DIS_FCNTL_WIDTH 1 /* XGMAC pause time count register */ -#define XM_PAUSE_TIME_REG_MAC 0x9 +#define XM_PAUSE_TIME_REG 0x1290 /* XGMAC transmit parameter register */ -#define XM_TX_PARAM_REG_MAC 0x0d +#define XM_TX_PARAM_REG 0x012d0 #define XM_TX_JUMBO_MODE_LBN 31 #define XM_TX_JUMBO_MODE_WIDTH 1 #define XM_MAX_TX_FRM_SIZE_LBN 16 #define XM_MAX_TX_FRM_SIZE_WIDTH 14 /* XGMAC receive parameter register */ -#define XM_RX_PARAM_REG_MAC 0x0e +#define XM_RX_PARAM_REG 0x12e0 #define XM_MAX_RX_FRM_SIZE_LBN 0 #define XM_MAX_RX_FRM_SIZE_WIDTH 14 /* XGMAC management interrupt status register */ -#define XM_MGT_INT_REG_MAC_B0 0x0f +#define XM_MGT_INT_REG_B0 0x12f0 #define XM_PRMBLE_ERR 2 #define XM_PRMBLE_WIDTH 1 #define XM_RMTFLT_LBN 1 @@ -589,7 +593,7 @@ #define XM_LCLFLT_WIDTH 1 /* XGXS/XAUI powerdown/reset register */ -#define XX_PWR_RST_REG_MAC 0x10 +#define XX_PWR_RST_REG 0x1300 #define XX_PWRDND_EN_LBN 15 #define XX_PWRDND_EN_WIDTH 1 @@ -619,7 +623,7 @@ #define XX_RST_XX_EN_WIDTH 1 /* XGXS/XAUI powerdown/reset control register */ -#define XX_SD_CTL_REG_MAC 0x11 +#define XX_SD_CTL_REG 0x1310 #define XX_HIDRVD_LBN 15 #define XX_HIDRVD_WIDTH 1 #define XX_LODRVD_LBN 14 @@ -645,7 +649,7 @@ #define XX_LPBKA_LBN 0 #define XX_LPBKA_WIDTH 1 -#define XX_TXDRV_CTL_REG_MAC 0x12 +#define XX_TXDRV_CTL_REG 0x1320 #define XX_DEQD_LBN 28 #define XX_DEQD_WIDTH 4 #define XX_DEQC_LBN 24 @@ -664,7 +668,7 @@ #define XX_DTXA_WIDTH 4 /* XAUI XGXS core status register */ -#define XX_CORE_STAT_REG_MAC 0x16 +#define XX_CORE_STAT_REG 0x1360 #define XX_FORCE_SIG_LBN 24 #define XX_FORCE_SIG_WIDTH 8 #define XX_FORCE_SIG_DECODE_FORCED 0xff @@ -1127,7 +1131,28 @@ struct falcon_nvconfig_board_v2 { __le16 board_revision; } __packed; -#define NVCONFIG_BASE 0x300 +/* Board configuration v3 extra information */ +struct falcon_nvconfig_board_v3 { + __le32 spi_device_type[2]; +} __packed; + +/* Bit numbers for spi_device_type */ +#define SPI_DEV_TYPE_SIZE_LBN 0 +#define SPI_DEV_TYPE_SIZE_WIDTH 5 +#define SPI_DEV_TYPE_ADDR_LEN_LBN 6 +#define SPI_DEV_TYPE_ADDR_LEN_WIDTH 2 +#define SPI_DEV_TYPE_ERASE_CMD_LBN 8 +#define SPI_DEV_TYPE_ERASE_CMD_WIDTH 8 +#define SPI_DEV_TYPE_ERASE_SIZE_LBN 16 +#define SPI_DEV_TYPE_ERASE_SIZE_WIDTH 5 +#define SPI_DEV_TYPE_BLOCK_SIZE_LBN 24 +#define SPI_DEV_TYPE_BLOCK_SIZE_WIDTH 5 +#define SPI_DEV_TYPE_FIELD(type, field) \ + (((type) >> EFX_LOW_BIT(field)) & EFX_MASK32(EFX_WIDTH(field))) + +#define NVCONFIG_OFFSET 0x300 +#define NVCONFIG_END 0x400 + #define NVCONFIG_BOARD_MAGIC_NUM 0xFA1C struct falcon_nvconfig { efx_oword_t ee_vpd_cfg_reg; /* 0x300 */ @@ -1144,6 +1169,8 @@ struct falcon_nvconfig { __le16 board_struct_ver; __le16 board_checksum; struct falcon_nvconfig_board_v2 board_v2; + efx_oword_t ee_base_page_reg; /* 0x3B0 */ + struct falcon_nvconfig_board_v3 board_v3; } __packed; #endif /* EFX_FALCON_HWDEFS_H */ diff --git a/drivers/net/sfc/falcon_xmac.c b/drivers/net/sfc/falcon_xmac.c index 55c0d9760be..0d9f68ff71e 100644 --- a/drivers/net/sfc/falcon_xmac.c +++ b/drivers/net/sfc/falcon_xmac.c @@ -23,56 +23,24 @@ /************************************************************************** * - * MAC register access - * - **************************************************************************/ - -/* Offset of an XMAC register within Falcon */ -#define FALCON_XMAC_REG(mac_reg) \ - (FALCON_XMAC_REGBANK + ((mac_reg) * FALCON_XMAC_REG_SIZE)) - -void falcon_xmac_writel(struct efx_nic *efx, - efx_dword_t *value, unsigned int mac_reg) -{ - efx_oword_t temp; - - EFX_POPULATE_OWORD_1(temp, MAC_DATA, EFX_DWORD_FIELD(*value, MAC_DATA)); - falcon_write(efx, &temp, FALCON_XMAC_REG(mac_reg)); -} - -void falcon_xmac_readl(struct efx_nic *efx, - efx_dword_t *value, unsigned int mac_reg) -{ - efx_oword_t temp; - - falcon_read(efx, &temp, FALCON_XMAC_REG(mac_reg)); - EFX_POPULATE_DWORD_1(*value, MAC_DATA, EFX_OWORD_FIELD(temp, MAC_DATA)); -} - -/************************************************************************** - * * MAC operations * *************************************************************************/ static int falcon_reset_xmac(struct efx_nic *efx) { - efx_dword_t reg; + efx_oword_t reg; int count; - EFX_POPULATE_DWORD_1(reg, XM_CORE_RST, 1); - falcon_xmac_writel(efx, ®, XM_GLB_CFG_REG_MAC); + EFX_POPULATE_OWORD_1(reg, XM_CORE_RST, 1); + falcon_write(efx, ®, XM_GLB_CFG_REG); for (count = 0; count < 10000; count++) { /* wait upto 100ms */ - falcon_xmac_readl(efx, ®, XM_GLB_CFG_REG_MAC); - if (EFX_DWORD_FIELD(reg, XM_CORE_RST) == 0) + falcon_read(efx, ®, XM_GLB_CFG_REG); + if (EFX_OWORD_FIELD(reg, XM_CORE_RST) == 0) return 0; udelay(10); } - /* This often fails when DSP is disabled, ignore it */ - if (sfe4001_phy_flash_cfg != 0) - return 0; - EFX_ERR(efx, "timed out waiting for XMAC core reset\n"); return -ETIMEDOUT; } @@ -80,25 +48,25 @@ static int falcon_reset_xmac(struct efx_nic *efx) /* Configure the XAUI driver that is an output from Falcon */ static void falcon_setup_xaui(struct efx_nic *efx) { - efx_dword_t sdctl, txdrv; + efx_oword_t sdctl, txdrv; /* Move the XAUI into low power, unless there is no PHY, in * which case the XAUI will have to drive a cable. */ if (efx->phy_type == PHY_TYPE_NONE) return; - falcon_xmac_readl(efx, &sdctl, XX_SD_CTL_REG_MAC); - EFX_SET_DWORD_FIELD(sdctl, XX_HIDRVD, XX_SD_CTL_DRV_DEFAULT); - EFX_SET_DWORD_FIELD(sdctl, XX_LODRVD, XX_SD_CTL_DRV_DEFAULT); - EFX_SET_DWORD_FIELD(sdctl, XX_HIDRVC, XX_SD_CTL_DRV_DEFAULT); - EFX_SET_DWORD_FIELD(sdctl, XX_LODRVC, XX_SD_CTL_DRV_DEFAULT); - EFX_SET_DWORD_FIELD(sdctl, XX_HIDRVB, XX_SD_CTL_DRV_DEFAULT); - EFX_SET_DWORD_FIELD(sdctl, XX_LODRVB, XX_SD_CTL_DRV_DEFAULT); - EFX_SET_DWORD_FIELD(sdctl, XX_HIDRVA, XX_SD_CTL_DRV_DEFAULT); - EFX_SET_DWORD_FIELD(sdctl, XX_LODRVA, XX_SD_CTL_DRV_DEFAULT); - falcon_xmac_writel(efx, &sdctl, XX_SD_CTL_REG_MAC); - - EFX_POPULATE_DWORD_8(txdrv, + falcon_read(efx, &sdctl, XX_SD_CTL_REG); + EFX_SET_OWORD_FIELD(sdctl, XX_HIDRVD, XX_SD_CTL_DRV_DEFAULT); + EFX_SET_OWORD_FIELD(sdctl, XX_LODRVD, XX_SD_CTL_DRV_DEFAULT); + EFX_SET_OWORD_FIELD(sdctl, XX_HIDRVC, XX_SD_CTL_DRV_DEFAULT); + EFX_SET_OWORD_FIELD(sdctl, XX_LODRVC, XX_SD_CTL_DRV_DEFAULT); + EFX_SET_OWORD_FIELD(sdctl, XX_HIDRVB, XX_SD_CTL_DRV_DEFAULT); + EFX_SET_OWORD_FIELD(sdctl, XX_LODRVB, XX_SD_CTL_DRV_DEFAULT); + EFX_SET_OWORD_FIELD(sdctl, XX_HIDRVA, XX_SD_CTL_DRV_DEFAULT); + EFX_SET_OWORD_FIELD(sdctl, XX_LODRVA, XX_SD_CTL_DRV_DEFAULT); + falcon_write(efx, &sdctl, XX_SD_CTL_REG); + + EFX_POPULATE_OWORD_8(txdrv, XX_DEQD, XX_TXDRV_DEQ_DEFAULT, XX_DEQC, XX_TXDRV_DEQ_DEFAULT, XX_DEQB, XX_TXDRV_DEQ_DEFAULT, @@ -107,67 +75,67 @@ static void falcon_setup_xaui(struct efx_nic *efx) XX_DTXC, XX_TXDRV_DTX_DEFAULT, XX_DTXB, XX_TXDRV_DTX_DEFAULT, XX_DTXA, XX_TXDRV_DTX_DEFAULT); - falcon_xmac_writel(efx, &txdrv, XX_TXDRV_CTL_REG_MAC); + falcon_write(efx, &txdrv, XX_TXDRV_CTL_REG); } static void falcon_hold_xaui_in_rst(struct efx_nic *efx) { - efx_dword_t reg; - - EFX_ZERO_DWORD(reg); - EFX_SET_DWORD_FIELD(reg, XX_PWRDNA_EN, 1); - EFX_SET_DWORD_FIELD(reg, XX_PWRDNB_EN, 1); - EFX_SET_DWORD_FIELD(reg, XX_PWRDNC_EN, 1); - EFX_SET_DWORD_FIELD(reg, XX_PWRDND_EN, 1); - EFX_SET_DWORD_FIELD(reg, XX_RSTPLLAB_EN, 1); - EFX_SET_DWORD_FIELD(reg, XX_RSTPLLCD_EN, 1); - EFX_SET_DWORD_FIELD(reg, XX_RESETA_EN, 1); - EFX_SET_DWORD_FIELD(reg, XX_RESETB_EN, 1); - EFX_SET_DWORD_FIELD(reg, XX_RESETC_EN, 1); - EFX_SET_DWORD_FIELD(reg, XX_RESETD_EN, 1); - EFX_SET_DWORD_FIELD(reg, XX_RSTXGXSRX_EN, 1); - EFX_SET_DWORD_FIELD(reg, XX_RSTXGXSTX_EN, 1); - falcon_xmac_writel(efx, ®, XX_PWR_RST_REG_MAC); + efx_oword_t reg; + + EFX_ZERO_OWORD(reg); + EFX_SET_OWORD_FIELD(reg, XX_PWRDNA_EN, 1); + EFX_SET_OWORD_FIELD(reg, XX_PWRDNB_EN, 1); + EFX_SET_OWORD_FIELD(reg, XX_PWRDNC_EN, 1); + EFX_SET_OWORD_FIELD(reg, XX_PWRDND_EN, 1); + EFX_SET_OWORD_FIELD(reg, XX_RSTPLLAB_EN, 1); + EFX_SET_OWORD_FIELD(reg, XX_RSTPLLCD_EN, 1); + EFX_SET_OWORD_FIELD(reg, XX_RESETA_EN, 1); + EFX_SET_OWORD_FIELD(reg, XX_RESETB_EN, 1); + EFX_SET_OWORD_FIELD(reg, XX_RESETC_EN, 1); + EFX_SET_OWORD_FIELD(reg, XX_RESETD_EN, 1); + EFX_SET_OWORD_FIELD(reg, XX_RSTXGXSRX_EN, 1); + EFX_SET_OWORD_FIELD(reg, XX_RSTXGXSTX_EN, 1); + falcon_write(efx, ®, XX_PWR_RST_REG); udelay(10); } static int _falcon_reset_xaui_a(struct efx_nic *efx) { - efx_dword_t reg; + efx_oword_t reg; falcon_hold_xaui_in_rst(efx); - falcon_xmac_readl(efx, ®, XX_PWR_RST_REG_MAC); + falcon_read(efx, ®, XX_PWR_RST_REG); /* Follow the RAMBUS XAUI data reset sequencing * Channels A and B first: power down, reset PLL, reset, clear */ - EFX_SET_DWORD_FIELD(reg, XX_PWRDNA_EN, 0); - EFX_SET_DWORD_FIELD(reg, XX_PWRDNB_EN, 0); - falcon_xmac_writel(efx, ®, XX_PWR_RST_REG_MAC); + EFX_SET_OWORD_FIELD(reg, XX_PWRDNA_EN, 0); + EFX_SET_OWORD_FIELD(reg, XX_PWRDNB_EN, 0); + falcon_write(efx, ®, XX_PWR_RST_REG); udelay(10); - EFX_SET_DWORD_FIELD(reg, XX_RSTPLLAB_EN, 0); - falcon_xmac_writel(efx, ®, XX_PWR_RST_REG_MAC); + EFX_SET_OWORD_FIELD(reg, XX_RSTPLLAB_EN, 0); + falcon_write(efx, ®, XX_PWR_RST_REG); udelay(10); - EFX_SET_DWORD_FIELD(reg, XX_RESETA_EN, 0); - EFX_SET_DWORD_FIELD(reg, XX_RESETB_EN, 0); - falcon_xmac_writel(efx, ®, XX_PWR_RST_REG_MAC); + EFX_SET_OWORD_FIELD(reg, XX_RESETA_EN, 0); + EFX_SET_OWORD_FIELD(reg, XX_RESETB_EN, 0); + falcon_write(efx, ®, XX_PWR_RST_REG); udelay(10); /* Channels C and D: power down, reset PLL, reset, clear */ - EFX_SET_DWORD_FIELD(reg, XX_PWRDNC_EN, 0); - EFX_SET_DWORD_FIELD(reg, XX_PWRDND_EN, 0); - falcon_xmac_writel(efx, ®, XX_PWR_RST_REG_MAC); + EFX_SET_OWORD_FIELD(reg, XX_PWRDNC_EN, 0); + EFX_SET_OWORD_FIELD(reg, XX_PWRDND_EN, 0); + falcon_write(efx, ®, XX_PWR_RST_REG); udelay(10); - EFX_SET_DWORD_FIELD(reg, XX_RSTPLLCD_EN, 0); - falcon_xmac_writel(efx, ®, XX_PWR_RST_REG_MAC); + EFX_SET_OWORD_FIELD(reg, XX_RSTPLLCD_EN, 0); + falcon_write(efx, ®, XX_PWR_RST_REG); udelay(10); - EFX_SET_DWORD_FIELD(reg, XX_RESETC_EN, 0); - EFX_SET_DWORD_FIELD(reg, XX_RESETD_EN, 0); - falcon_xmac_writel(efx, ®, XX_PWR_RST_REG_MAC); + EFX_SET_OWORD_FIELD(reg, XX_RESETC_EN, 0); + EFX_SET_OWORD_FIELD(reg, XX_RESETD_EN, 0); + falcon_write(efx, ®, XX_PWR_RST_REG); udelay(10); /* Setup XAUI */ @@ -175,8 +143,8 @@ static int _falcon_reset_xaui_a(struct efx_nic *efx) udelay(10); /* Take XGXS out of reset */ - EFX_ZERO_DWORD(reg); - falcon_xmac_writel(efx, ®, XX_PWR_RST_REG_MAC); + EFX_ZERO_OWORD(reg); + falcon_write(efx, ®, XX_PWR_RST_REG); udelay(10); return 0; @@ -184,16 +152,16 @@ static int _falcon_reset_xaui_a(struct efx_nic *efx) static int _falcon_reset_xaui_b(struct efx_nic *efx) { - efx_dword_t reg; + efx_oword_t reg; int count; EFX_POPULATE_DWORD_1(reg, XX_RST_XX_EN, 1); - falcon_xmac_writel(efx, ®, XX_PWR_RST_REG_MAC); + falcon_write(efx, ®, XX_PWR_RST_REG); /* Give some time for the link to establish */ for (count = 0; count < 1000; count++) { /* wait upto 10ms */ - falcon_xmac_readl(efx, ®, XX_PWR_RST_REG_MAC); - if (EFX_DWORD_FIELD(reg, XX_RST_XX_EN) == 0) { + falcon_read(efx, ®, XX_PWR_RST_REG); + if (EFX_OWORD_FIELD(reg, XX_RST_XX_EN) == 0) { falcon_setup_xaui(efx); return 0; } @@ -217,41 +185,41 @@ int falcon_reset_xaui(struct efx_nic *efx) return rc; } -static int falcon_xgmii_status(struct efx_nic *efx) +static bool falcon_xgmii_status(struct efx_nic *efx) { - efx_dword_t reg; + efx_oword_t reg; if (falcon_rev(efx) < FALCON_REV_B0) - return 1; + return true; /* The ISR latches, so clear it and re-read */ - falcon_xmac_readl(efx, ®, XM_MGT_INT_REG_MAC_B0); - falcon_xmac_readl(efx, ®, XM_MGT_INT_REG_MAC_B0); + falcon_read(efx, ®, XM_MGT_INT_REG_B0); + falcon_read(efx, ®, XM_MGT_INT_REG_B0); - if (EFX_DWORD_FIELD(reg, XM_LCLFLT) || - EFX_DWORD_FIELD(reg, XM_RMTFLT)) { + if (EFX_OWORD_FIELD(reg, XM_LCLFLT) || + EFX_OWORD_FIELD(reg, XM_RMTFLT)) { EFX_INFO(efx, "MGT_INT: "EFX_DWORD_FMT"\n", EFX_DWORD_VAL(reg)); - return 0; + return false; } - return 1; + return true; } -static void falcon_mask_status_intr(struct efx_nic *efx, int enable) +static void falcon_mask_status_intr(struct efx_nic *efx, bool enable) { - efx_dword_t reg; + efx_oword_t reg; if ((falcon_rev(efx) < FALCON_REV_B0) || LOOPBACK_INTERNAL(efx)) return; /* Flush the ISR */ if (enable) - falcon_xmac_readl(efx, ®, XM_MGT_INT_REG_MAC_B0); + falcon_read(efx, ®, XM_MGT_INT_REG_B0); - EFX_POPULATE_DWORD_2(reg, + EFX_POPULATE_OWORD_2(reg, XM_MSK_RMTFLT, !enable, XM_MSK_LCLFLT, !enable); - falcon_xmac_writel(efx, ®, XM_MGT_INT_MSK_REG_MAC_B0); + falcon_write(efx, ®, XM_MGT_INT_MSK_REG_B0); } int falcon_init_xmac(struct efx_nic *efx) @@ -274,7 +242,7 @@ int falcon_init_xmac(struct efx_nic *efx) if (rc) goto fail2; - falcon_mask_status_intr(efx, 1); + falcon_mask_status_intr(efx, true); return 0; fail2: @@ -283,34 +251,34 @@ int falcon_init_xmac(struct efx_nic *efx) return rc; } -int falcon_xaui_link_ok(struct efx_nic *efx) +bool falcon_xaui_link_ok(struct efx_nic *efx) { - efx_dword_t reg; - int align_done, sync_status, link_ok = 0; + efx_oword_t reg; + bool align_done, link_ok = false; + int sync_status; if (LOOPBACK_INTERNAL(efx)) - return 1; + return true; /* Read link status */ - falcon_xmac_readl(efx, ®, XX_CORE_STAT_REG_MAC); + falcon_read(efx, ®, XX_CORE_STAT_REG); - align_done = EFX_DWORD_FIELD(reg, XX_ALIGN_DONE); - sync_status = EFX_DWORD_FIELD(reg, XX_SYNC_STAT); + align_done = EFX_OWORD_FIELD(reg, XX_ALIGN_DONE); + sync_status = EFX_OWORD_FIELD(reg, XX_SYNC_STAT); if (align_done && (sync_status == XX_SYNC_STAT_DECODE_SYNCED)) - link_ok = 1; + link_ok = true; /* Clear link status ready for next read */ - EFX_SET_DWORD_FIELD(reg, XX_COMMA_DET, XX_COMMA_DET_RESET); - EFX_SET_DWORD_FIELD(reg, XX_CHARERR, XX_CHARERR_RESET); - EFX_SET_DWORD_FIELD(reg, XX_DISPERR, XX_DISPERR_RESET); - falcon_xmac_writel(efx, ®, XX_CORE_STAT_REG_MAC); + EFX_SET_OWORD_FIELD(reg, XX_COMMA_DET, XX_COMMA_DET_RESET); + EFX_SET_OWORD_FIELD(reg, XX_CHARERR, XX_CHARERR_RESET); + EFX_SET_OWORD_FIELD(reg, XX_DISPERR, XX_DISPERR_RESET); + falcon_write(efx, ®, XX_CORE_STAT_REG); /* If the link is up, then check the phy side of the xaui link * (error conditions from the wire side propoagate back through * the phy to the xaui side). */ if (efx->link_up && link_ok) { - int has_phyxs = efx->phy_op->mmds & (1 << MDIO_MMD_PHYXS); - if (has_phyxs) + if (efx->phy_op->mmds & (1 << MDIO_MMD_PHYXS)) link_ok = mdio_clause45_phyxgxs_lane_sync(efx); } @@ -325,15 +293,15 @@ int falcon_xaui_link_ok(struct efx_nic *efx) static void falcon_reconfigure_xmac_core(struct efx_nic *efx) { unsigned int max_frame_len; - efx_dword_t reg; - int rx_fc = (efx->flow_control & EFX_FC_RX) ? 1 : 0; + efx_oword_t reg; + bool rx_fc = !!(efx->flow_control & EFX_FC_RX); /* Configure MAC - cut-thru mode is hard wired on */ EFX_POPULATE_DWORD_3(reg, XM_RX_JUMBO_MODE, 1, XM_TX_STAT_EN, 1, XM_RX_STAT_EN, 1); - falcon_xmac_writel(efx, ®, XM_GLB_CFG_REG_MAC); + falcon_write(efx, ®, XM_GLB_CFG_REG); /* Configure TX */ EFX_POPULATE_DWORD_6(reg, @@ -343,7 +311,7 @@ static void falcon_reconfigure_xmac_core(struct efx_nic *efx) XM_TXCRC, 1, XM_FCNTL, 1, XM_IPG, 0x3); - falcon_xmac_writel(efx, ®, XM_TX_CFG_REG_MAC); + falcon_write(efx, ®, XM_TX_CFG_REG); /* Configure RX */ EFX_POPULATE_DWORD_5(reg, @@ -352,21 +320,21 @@ static void falcon_reconfigure_xmac_core(struct efx_nic *efx) XM_ACPT_ALL_MCAST, 1, XM_ACPT_ALL_UCAST, efx->promiscuous, XM_PASS_CRC_ERR, 1); - falcon_xmac_writel(efx, ®, XM_RX_CFG_REG_MAC); + falcon_write(efx, ®, XM_RX_CFG_REG); /* Set frame length */ max_frame_len = EFX_MAX_FRAME_LEN(efx->net_dev->mtu); EFX_POPULATE_DWORD_1(reg, XM_MAX_RX_FRM_SIZE, max_frame_len); - falcon_xmac_writel(efx, ®, XM_RX_PARAM_REG_MAC); + falcon_write(efx, ®, XM_RX_PARAM_REG); EFX_POPULATE_DWORD_2(reg, XM_MAX_TX_FRM_SIZE, max_frame_len, XM_TX_JUMBO_MODE, 1); - falcon_xmac_writel(efx, ®, XM_TX_PARAM_REG_MAC); + falcon_write(efx, ®, XM_TX_PARAM_REG); EFX_POPULATE_DWORD_2(reg, XM_PAUSE_TIME, 0xfffe, /* MAX PAUSE TIME */ - XM_DIS_FCNTL, rx_fc ? 0 : 1); - falcon_xmac_writel(efx, ®, XM_FC_REG_MAC); + XM_DIS_FCNTL, !rx_fc); + falcon_write(efx, ®, XM_FC_REG); /* Set MAC address */ EFX_POPULATE_DWORD_4(reg, @@ -374,83 +342,75 @@ static void falcon_reconfigure_xmac_core(struct efx_nic *efx) XM_ADR_1, efx->net_dev->dev_addr[1], XM_ADR_2, efx->net_dev->dev_addr[2], XM_ADR_3, efx->net_dev->dev_addr[3]); - falcon_xmac_writel(efx, ®, XM_ADR_LO_REG_MAC); + falcon_write(efx, ®, XM_ADR_LO_REG); EFX_POPULATE_DWORD_2(reg, XM_ADR_4, efx->net_dev->dev_addr[4], XM_ADR_5, efx->net_dev->dev_addr[5]); - falcon_xmac_writel(efx, ®, XM_ADR_HI_REG_MAC); + falcon_write(efx, ®, XM_ADR_HI_REG); } static void falcon_reconfigure_xgxs_core(struct efx_nic *efx) { - efx_dword_t reg; - int xgxs_loopback = (efx->loopback_mode == LOOPBACK_XGXS) ? 1 : 0; - int xaui_loopback = (efx->loopback_mode == LOOPBACK_XAUI) ? 1 : 0; - int xgmii_loopback = - (efx->loopback_mode == LOOPBACK_XGMII) ? 1 : 0; + efx_oword_t reg; + bool xgxs_loopback = (efx->loopback_mode == LOOPBACK_XGXS); + bool xaui_loopback = (efx->loopback_mode == LOOPBACK_XAUI); + bool xgmii_loopback = (efx->loopback_mode == LOOPBACK_XGMII); /* XGXS block is flaky and will need to be reset if moving * into our out of XGMII, XGXS or XAUI loopbacks. */ if (EFX_WORKAROUND_5147(efx)) { - int old_xgmii_loopback, old_xgxs_loopback, old_xaui_loopback; - int reset_xgxs; + bool old_xgmii_loopback, old_xgxs_loopback, old_xaui_loopback; + bool reset_xgxs; - falcon_xmac_readl(efx, ®, XX_CORE_STAT_REG_MAC); - old_xgxs_loopback = EFX_DWORD_FIELD(reg, XX_XGXS_LB_EN); - old_xgmii_loopback = EFX_DWORD_FIELD(reg, XX_XGMII_LB_EN); + falcon_read(efx, ®, XX_CORE_STAT_REG); + old_xgxs_loopback = EFX_OWORD_FIELD(reg, XX_XGXS_LB_EN); + old_xgmii_loopback = EFX_OWORD_FIELD(reg, XX_XGMII_LB_EN); - falcon_xmac_readl(efx, ®, XX_SD_CTL_REG_MAC); - old_xaui_loopback = EFX_DWORD_FIELD(reg, XX_LPBKA); + falcon_read(efx, ®, XX_SD_CTL_REG); + old_xaui_loopback = EFX_OWORD_FIELD(reg, XX_LPBKA); /* The PHY driver may have turned XAUI off */ reset_xgxs = ((xgxs_loopback != old_xgxs_loopback) || (xaui_loopback != old_xaui_loopback) || (xgmii_loopback != old_xgmii_loopback)); - if (reset_xgxs) { - falcon_xmac_readl(efx, ®, XX_PWR_RST_REG_MAC); - EFX_SET_DWORD_FIELD(reg, XX_RSTXGXSTX_EN, 1); - EFX_SET_DWORD_FIELD(reg, XX_RSTXGXSRX_EN, 1); - falcon_xmac_writel(efx, ®, XX_PWR_RST_REG_MAC); - udelay(1); - EFX_SET_DWORD_FIELD(reg, XX_RSTXGXSTX_EN, 0); - EFX_SET_DWORD_FIELD(reg, XX_RSTXGXSRX_EN, 0); - falcon_xmac_writel(efx, ®, XX_PWR_RST_REG_MAC); - udelay(1); - } + + if (reset_xgxs) + falcon_reset_xaui(efx); } - falcon_xmac_readl(efx, ®, XX_CORE_STAT_REG_MAC); - EFX_SET_DWORD_FIELD(reg, XX_FORCE_SIG, + falcon_read(efx, ®, XX_CORE_STAT_REG); + EFX_SET_OWORD_FIELD(reg, XX_FORCE_SIG, (xgxs_loopback || xaui_loopback) ? XX_FORCE_SIG_DECODE_FORCED : 0); - EFX_SET_DWORD_FIELD(reg, XX_XGXS_LB_EN, xgxs_loopback); - EFX_SET_DWORD_FIELD(reg, XX_XGMII_LB_EN, xgmii_loopback); - falcon_xmac_writel(efx, ®, XX_CORE_STAT_REG_MAC); - - falcon_xmac_readl(efx, ®, XX_SD_CTL_REG_MAC); - EFX_SET_DWORD_FIELD(reg, XX_LPBKD, xaui_loopback); - EFX_SET_DWORD_FIELD(reg, XX_LPBKC, xaui_loopback); - EFX_SET_DWORD_FIELD(reg, XX_LPBKB, xaui_loopback); - EFX_SET_DWORD_FIELD(reg, XX_LPBKA, xaui_loopback); - falcon_xmac_writel(efx, ®, XX_SD_CTL_REG_MAC); + EFX_SET_OWORD_FIELD(reg, XX_XGXS_LB_EN, xgxs_loopback); + EFX_SET_OWORD_FIELD(reg, XX_XGMII_LB_EN, xgmii_loopback); + falcon_write(efx, ®, XX_CORE_STAT_REG); + + falcon_read(efx, ®, XX_SD_CTL_REG); + EFX_SET_OWORD_FIELD(reg, XX_LPBKD, xaui_loopback); + EFX_SET_OWORD_FIELD(reg, XX_LPBKC, xaui_loopback); + EFX_SET_OWORD_FIELD(reg, XX_LPBKB, xaui_loopback); + EFX_SET_OWORD_FIELD(reg, XX_LPBKA, xaui_loopback); + falcon_write(efx, ®, XX_SD_CTL_REG); } /* Try and bring the Falcon side of the Falcon-Phy XAUI link fails * to come back up. Bash it until it comes back up */ -static int falcon_check_xaui_link_up(struct efx_nic *efx) +static bool falcon_check_xaui_link_up(struct efx_nic *efx) { int max_tries, tries; tries = EFX_WORKAROUND_5147(efx) ? 5 : 1; max_tries = tries; if ((efx->loopback_mode == LOOPBACK_NETWORK) || - (efx->phy_type == PHY_TYPE_NONE)) - return 0; + (efx->phy_type == PHY_TYPE_NONE) || + efx_phy_mode_disabled(efx->phy_mode)) + return false; while (tries) { if (falcon_xaui_link_ok(efx)) - return 1; + return true; EFX_LOG(efx, "%s Clobbering XAUI (%d tries left).\n", __func__, tries); @@ -461,18 +421,22 @@ static int falcon_check_xaui_link_up(struct efx_nic *efx) EFX_LOG(efx, "Failed to bring XAUI link back up in %d tries!\n", max_tries); - return 0; + return false; } void falcon_reconfigure_xmac(struct efx_nic *efx) { - int xaui_link_ok; + bool xaui_link_ok; - falcon_mask_status_intr(efx, 0); + falcon_mask_status_intr(efx, false); falcon_deconfigure_mac_wrapper(efx); - efx->tx_disabled = LOOPBACK_INTERNAL(efx); + /* Reconfigure the PHY, disabling transmit in mac level loopback. */ + if (LOOPBACK_INTERNAL(efx)) + efx->phy_mode |= PHY_MODE_TX_DISABLED; + else + efx->phy_mode &= ~PHY_MODE_TX_DISABLED; efx->phy_op->reconfigure(efx); falcon_reconfigure_xgxs_core(efx); @@ -484,7 +448,7 @@ void falcon_reconfigure_xmac(struct efx_nic *efx) xaui_link_ok = falcon_check_xaui_link_up(efx); if (xaui_link_ok && efx->link_up) - falcon_mask_status_intr(efx, 1); + falcon_mask_status_intr(efx, true); } void falcon_fini_xmac(struct efx_nic *efx) @@ -554,21 +518,23 @@ void falcon_update_stats_xmac(struct efx_nic *efx) /* Update derived statistics */ mac_stats->tx_good_bytes = - (mac_stats->tx_bytes - mac_stats->tx_bad_bytes); + (mac_stats->tx_bytes - mac_stats->tx_bad_bytes - + mac_stats->tx_control * 64); mac_stats->rx_bad_bytes = - (mac_stats->rx_bytes - mac_stats->rx_good_bytes); + (mac_stats->rx_bytes - mac_stats->rx_good_bytes - + mac_stats->rx_control * 64); } int falcon_check_xmac(struct efx_nic *efx) { - unsigned xaui_link_ok; + bool xaui_link_ok; int rc; if ((efx->loopback_mode == LOOPBACK_NETWORK) || - (efx->phy_type == PHY_TYPE_NONE)) + efx_phy_mode_disabled(efx->phy_mode)) return 0; - falcon_mask_status_intr(efx, 0); + falcon_mask_status_intr(efx, false); xaui_link_ok = falcon_xaui_link_ok(efx); if (EFX_WORKAROUND_5147(efx) && !xaui_link_ok) @@ -579,7 +545,7 @@ int falcon_check_xmac(struct efx_nic *efx) /* Unmask interrupt if everything was (and still is) ok */ if (xaui_link_ok && efx->link_up) - falcon_mask_status_intr(efx, 1); + falcon_mask_status_intr(efx, true); return rc; } @@ -620,7 +586,7 @@ int falcon_xmac_set_settings(struct efx_nic *efx, struct ethtool_cmd *ecmd) int falcon_xmac_set_pause(struct efx_nic *efx, enum efx_fc_type flow_control) { - int reset; + bool reset; if (flow_control & EFX_FC_AUTO) { EFX_LOG(efx, "10G does not support flow control " diff --git a/drivers/net/sfc/mac.h b/drivers/net/sfc/mac.h index edd07d4dee1..a31571c6913 100644 --- a/drivers/net/sfc/mac.h +++ b/drivers/net/sfc/mac.h @@ -13,10 +13,6 @@ #include "net_driver.h" -extern void falcon_xmac_writel(struct efx_nic *efx, - efx_dword_t *value, unsigned int mac_reg); -extern void falcon_xmac_readl(struct efx_nic *efx, - efx_dword_t *value, unsigned int mac_reg); extern int falcon_init_xmac(struct efx_nic *efx); extern void falcon_reconfigure_xmac(struct efx_nic *efx); extern void falcon_update_stats_xmac(struct efx_nic *efx); diff --git a/drivers/net/sfc/mdio_10g.c b/drivers/net/sfc/mdio_10g.c index c4f540e93b7..003e48dcb2f 100644 --- a/drivers/net/sfc/mdio_10g.c +++ b/drivers/net/sfc/mdio_10g.c @@ -159,20 +159,21 @@ int mdio_clause45_check_mmds(struct efx_nic *efx, return 0; } -int mdio_clause45_links_ok(struct efx_nic *efx, unsigned int mmd_mask) +bool mdio_clause45_links_ok(struct efx_nic *efx, unsigned int mmd_mask) { int phy_id = efx->mii.phy_id; int status; - int ok = 1; + bool ok = true; int mmd = 0; - int good; /* If the port is in loopback, then we should only consider a subset * of mmd's */ if (LOOPBACK_INTERNAL(efx)) - return 1; + return true; else if (efx->loopback_mode == LOOPBACK_NETWORK) - return 0; + return false; + else if (efx_phy_mode_disabled(efx->phy_mode)) + return false; else if (efx->loopback_mode == LOOPBACK_PHYXS) mmd_mask &= ~(MDIO_MMDREG_DEVS0_PHYXS | MDIO_MMDREG_DEVS0_PCS | @@ -192,8 +193,7 @@ int mdio_clause45_links_ok(struct efx_nic *efx, unsigned int mmd_mask) status = mdio_clause45_read(efx, phy_id, mmd, MDIO_MMDREG_STAT1); - good = status & (1 << MDIO_MMDREG_STAT1_LINK_LBN); - ok = ok && good; + ok = ok && (status & (1 << MDIO_MMDREG_STAT1_LINK_LBN)); } mmd_mask = (mmd_mask >> 1); mmd++; @@ -208,7 +208,7 @@ void mdio_clause45_transmit_disable(struct efx_nic *efx) ctrl1 = ctrl2 = mdio_clause45_read(efx, phy_id, MDIO_MMD_PMAPMD, MDIO_MMDREG_TXDIS); - if (efx->tx_disabled) + if (efx->phy_mode & PHY_MODE_TX_DISABLED) ctrl2 |= (1 << MDIO_MMDREG_TXDIS_GLOBAL_LBN); else ctrl1 &= ~(1 << MDIO_MMDREG_TXDIS_GLOBAL_LBN); diff --git a/drivers/net/sfc/mdio_10g.h b/drivers/net/sfc/mdio_10g.h index cb99f3f4491..19c42eaf7fb 100644 --- a/drivers/net/sfc/mdio_10g.h +++ b/drivers/net/sfc/mdio_10g.h @@ -199,18 +199,19 @@ static inline u32 mdio_clause45_read_id(struct efx_nic *efx, int mmd) return (id_hi << 16) | (id_low); } -static inline int mdio_clause45_phyxgxs_lane_sync(struct efx_nic *efx) +static inline bool mdio_clause45_phyxgxs_lane_sync(struct efx_nic *efx) { - int i, sync, lane_status; + int i, lane_status; + bool sync; for (i = 0; i < 2; ++i) lane_status = mdio_clause45_read(efx, efx->mii.phy_id, MDIO_MMD_PHYXS, MDIO_PHYXS_LANE_STATE); - sync = (lane_status & (1 << MDIO_PHYXS_LANE_ALIGNED_LBN)) != 0; + sync = !!(lane_status & (1 << MDIO_PHYXS_LANE_ALIGNED_LBN)); if (!sync) - EFX_INFO(efx, "XGXS lane status: %x\n", lane_status); + EFX_LOG(efx, "XGXS lane status: %x\n", lane_status); return sync; } @@ -230,8 +231,8 @@ int mdio_clause45_check_mmds(struct efx_nic *efx, unsigned int mmd_mask, unsigned int fatal_mask); /* Check the link status of specified mmds in bit mask */ -extern int mdio_clause45_links_ok(struct efx_nic *efx, - unsigned int mmd_mask); +extern bool mdio_clause45_links_ok(struct efx_nic *efx, + unsigned int mmd_mask); /* Generic transmit disable support though PMAPMD */ extern void mdio_clause45_transmit_disable(struct efx_nic *efx); diff --git a/drivers/net/sfc/net_driver.h b/drivers/net/sfc/net_driver.h index 219c74a772c..567df00090f 100644 --- a/drivers/net/sfc/net_driver.h +++ b/drivers/net/sfc/net_driver.h @@ -88,9 +88,12 @@ do {if (net_ratelimit()) EFX_LOG(efx, fmt, ##args); } while (0) **************************************************************************/ #define EFX_MAX_CHANNELS 32 -#define EFX_MAX_TX_QUEUES 1 #define EFX_MAX_RX_QUEUES EFX_MAX_CHANNELS +#define EFX_TX_QUEUE_OFFLOAD_CSUM 0 +#define EFX_TX_QUEUE_NO_CSUM 1 +#define EFX_TX_QUEUE_COUNT 2 + /** * struct efx_special_buffer - An Efx special buffer * @addr: CPU base address of the buffer @@ -127,7 +130,6 @@ struct efx_special_buffer { * This field is zero when the queue slot is empty. * @continuation: True if this fragment is not the end of a packet. * @unmap_single: True if pci_unmap_single should be used. - * @unmap_addr: DMA address to unmap * @unmap_len: Length of this fragment to unmap */ struct efx_tx_buffer { @@ -135,9 +137,8 @@ struct efx_tx_buffer { struct efx_tso_header *tsoh; dma_addr_t dma_addr; unsigned short len; - unsigned char continuation; - unsigned char unmap_single; - dma_addr_t unmap_addr; + bool continuation; + bool unmap_single; unsigned short unmap_len; }; @@ -156,13 +157,12 @@ struct efx_tx_buffer { * * @efx: The associated Efx NIC * @queue: DMA queue number - * @used: Queue is used by net driver * @channel: The associated channel * @buffer: The software buffer ring * @txd: The hardware descriptor ring * @read_count: Current read pointer. * This is the number of buffers that have been removed from both rings. - * @stopped: Stopped flag. + * @stopped: Stopped count. * Set if this TX queue is currently stopping its port. * @insert_count: Current insert pointer * This is the number of buffers that have been added to the @@ -188,7 +188,6 @@ struct efx_tx_queue { /* Members which don't change on the fast path */ struct efx_nic *efx ____cacheline_aligned_in_smp; int queue; - int used; struct efx_channel *channel; struct efx_nic *nic; struct efx_tx_buffer *buffer; @@ -232,7 +231,6 @@ struct efx_rx_buffer { * struct efx_rx_queue - An Efx RX queue * @efx: The associated Efx NIC * @queue: DMA queue number - * @used: Queue is used by net driver * @channel: The associated channel * @buffer: The software buffer ring * @rxd: The hardware descriptor ring @@ -266,7 +264,6 @@ struct efx_rx_buffer { struct efx_rx_queue { struct efx_nic *efx; int queue; - int used; struct efx_channel *channel; struct efx_rx_buffer *buffer; struct efx_special_buffer rxd; @@ -325,12 +322,10 @@ enum efx_rx_alloc_method { * queue. * * @efx: Associated Efx NIC - * @evqnum: Event queue number * @channel: Channel instance number * @used_flags: Channel is used by net driver * @enabled: Channel enabled indicator * @irq: IRQ number (MSI and MSI-X only) - * @has_interrupt: Channel has an interrupt * @irq_moderation: IRQ moderation value (in us) * @napi_dev: Net device used with NAPI * @napi_str: NAPI control structure @@ -357,17 +352,14 @@ enum efx_rx_alloc_method { */ struct efx_channel { struct efx_nic *efx; - int evqnum; int channel; int used_flags; - int enabled; + bool enabled; int irq; - unsigned int has_interrupt; unsigned int irq_moderation; struct net_device *napi_dev; struct napi_struct napi_str; - struct work_struct reset_work; - int work_pending; + bool work_pending; struct efx_special_buffer eventq; unsigned int eventq_read_ptr; unsigned int last_eventq_read_ptr; @@ -390,7 +382,7 @@ struct efx_channel { * access with prefetches. */ struct efx_rx_buffer *rx_pkt; - int rx_pkt_csummed; + bool rx_pkt_csummed; }; @@ -403,8 +395,8 @@ struct efx_channel { */ struct efx_blinker { int led_num; - int state; - int resubmit; + bool state; + bool resubmit; struct timer_list timer; }; @@ -432,8 +424,8 @@ struct efx_board { * have a separate init callback that happens later than * board init. */ int (*init_leds)(struct efx_nic *efx); - void (*set_fault_led) (struct efx_nic *efx, int state); - void (*blink) (struct efx_nic *efx, int start); + void (*set_fault_led) (struct efx_nic *efx, bool state); + void (*blink) (struct efx_nic *efx, bool start); void (*fini) (struct efx_nic *nic); struct efx_blinker blinker; struct i2c_client *hwmon_client, *ioexp_client; @@ -467,8 +459,7 @@ enum nic_state { STATE_INIT = 0, STATE_RUNNING = 1, STATE_FINI = 2, - STATE_RESETTING = 3, /* rtnl_lock always held */ - STATE_DISABLED = 4, + STATE_DISABLED = 3, STATE_MAX, }; @@ -523,10 +514,28 @@ struct efx_phy_operations { void (*clear_interrupt) (struct efx_nic *efx); int (*check_hw) (struct efx_nic *efx); void (*reset_xaui) (struct efx_nic *efx); + int (*test) (struct efx_nic *efx); int mmds; unsigned loopbacks; }; +/** + * @enum efx_phy_mode - PHY operating mode flags + * @PHY_MODE_NORMAL: on and should pass traffic + * @PHY_MODE_TX_DISABLED: on with TX disabled + * @PHY_MODE_SPECIAL: on but will not pass traffic + */ +enum efx_phy_mode { + PHY_MODE_NORMAL = 0, + PHY_MODE_TX_DISABLED = 1, + PHY_MODE_SPECIAL = 8, +}; + +static inline bool efx_phy_mode_disabled(enum efx_phy_mode mode) +{ + return !!(mode & ~PHY_MODE_TX_DISABLED); +} + /* * Efx extended statistics * @@ -632,7 +641,7 @@ union efx_multicast_hash { * @tx_queue: TX DMA queues * @rx_queue: RX DMA queues * @channel: Channels - * @rss_queues: Number of RSS queues + * @n_rx_queues: Number of RX queues * @rx_buffer_len: RX buffer length * @rx_buffer_order: Order (log2) of number of pages for each RX buffer * @irq_status: Interrupt status buffer @@ -640,15 +649,20 @@ union efx_multicast_hash { * This register is written with the SMP processor ID whenever an * interrupt is handled. It is used by falcon_test_interrupt() * to verify that an interrupt has occurred. + * @spi_flash: SPI flash device + * This field will be %NULL if no flash device is present. + * @spi_eeprom: SPI EEPROM device + * This field will be %NULL if no EEPROM device is present. * @n_rx_nodesc_drop_cnt: RX no descriptor drop count * @nic_data: Hardware dependant state - * @mac_lock: MAC access lock. Protects @port_enabled, efx_monitor() and - * efx_reconfigure_port() + * @mac_lock: MAC access lock. Protects @port_enabled, @phy_mode, + * @port_inhibited, efx_monitor() and efx_reconfigure_port() * @port_enabled: Port enabled indicator. * Serialises efx_stop_all(), efx_start_all() and efx_monitor() and * efx_reconfigure_work with kernel interfaces. Safe to read under any * one of the rtnl_lock, mac_lock, or netif_tx_lock, but all three must * be held to modify it. + * @port_inhibited: If set, the netif_carrier is always off. Hold the mac_lock * @port_initialized: Port initialized? * @net_dev: Operating system network device. Consider holding the rtnl lock * @rx_checksum_enabled: RX checksumming enabled @@ -658,14 +672,16 @@ union efx_multicast_hash { * can provide. Generic code converts these into a standard * &struct net_device_stats. * @stats_buffer: DMA buffer for statistics - * @stats_lock: Statistics update lock + * @stats_lock: Statistics update lock. Serialises statistics fetches + * @stats_enabled: Temporarily disable statistics fetches. + * Serialised by @stats_lock * @mac_address: Permanent MAC address * @phy_type: PHY type * @phy_lock: PHY access lock * @phy_op: PHY interface * @phy_data: PHY private data (including PHY-specific stats) * @mii: PHY interface - * @tx_disabled: PHY transmitter turned off + * @phy_mode: PHY operating mode. Serialised by @mac_lock. * @link_up: Link status * @link_options: Link options (MII/GMII format) * @n_link_state_changes: Number of times the link has changed state @@ -700,27 +716,31 @@ struct efx_nic { enum nic_state state; enum reset_type reset_pending; - struct efx_tx_queue tx_queue[EFX_MAX_TX_QUEUES]; + struct efx_tx_queue tx_queue[EFX_TX_QUEUE_COUNT]; struct efx_rx_queue rx_queue[EFX_MAX_RX_QUEUES]; struct efx_channel channel[EFX_MAX_CHANNELS]; - int rss_queues; + int n_rx_queues; unsigned int rx_buffer_len; unsigned int rx_buffer_order; struct efx_buffer irq_status; volatile signed int last_irq_cpu; + struct efx_spi_device *spi_flash; + struct efx_spi_device *spi_eeprom; + unsigned n_rx_nodesc_drop_cnt; struct falcon_nic_data *nic_data; struct mutex mac_lock; - int port_enabled; + bool port_enabled; + bool port_inhibited; - int port_initialized; + bool port_initialized; struct net_device *net_dev; - int rx_checksum_enabled; + bool rx_checksum_enabled; atomic_t netif_stop_count; spinlock_t netif_stop_lock; @@ -728,6 +748,7 @@ struct efx_nic { struct efx_mac_stats mac_stats; struct efx_buffer stats_buffer; spinlock_t stats_lock; + bool stats_enabled; unsigned char mac_address[ETH_ALEN]; @@ -736,13 +757,13 @@ struct efx_nic { struct efx_phy_operations *phy_op; void *phy_data; struct mii_if_info mii; - unsigned tx_disabled; + enum efx_phy_mode phy_mode; - int link_up; + bool link_up; unsigned int link_options; unsigned int n_link_state_changes; - int promiscuous; + bool promiscuous; union efx_multicast_hash multicast_hash; enum efx_fc_type flow_control; struct work_struct reconfigure_work; @@ -829,50 +850,33 @@ struct efx_nic_type { continue; \ else -/* Iterate over all used channels with interrupts */ -#define efx_for_each_channel_with_interrupt(_channel, _efx) \ - for (_channel = &_efx->channel[0]; \ - _channel < &_efx->channel[EFX_MAX_CHANNELS]; \ - _channel++) \ - if (!(_channel->used_flags && _channel->has_interrupt)) \ - continue; \ - else - /* Iterate over all used TX queues */ #define efx_for_each_tx_queue(_tx_queue, _efx) \ for (_tx_queue = &_efx->tx_queue[0]; \ - _tx_queue < &_efx->tx_queue[EFX_MAX_TX_QUEUES]; \ - _tx_queue++) \ - if (!_tx_queue->used) \ - continue; \ - else + _tx_queue < &_efx->tx_queue[EFX_TX_QUEUE_COUNT]; \ + _tx_queue++) /* Iterate over all TX queues belonging to a channel */ #define efx_for_each_channel_tx_queue(_tx_queue, _channel) \ for (_tx_queue = &_channel->efx->tx_queue[0]; \ - _tx_queue < &_channel->efx->tx_queue[EFX_MAX_TX_QUEUES]; \ + _tx_queue < &_channel->efx->tx_queue[EFX_TX_QUEUE_COUNT]; \ _tx_queue++) \ - if ((!_tx_queue->used) || \ - (_tx_queue->channel != _channel)) \ + if (_tx_queue->channel != _channel) \ continue; \ else /* Iterate over all used RX queues */ #define efx_for_each_rx_queue(_rx_queue, _efx) \ for (_rx_queue = &_efx->rx_queue[0]; \ - _rx_queue < &_efx->rx_queue[EFX_MAX_RX_QUEUES]; \ - _rx_queue++) \ - if (!_rx_queue->used) \ - continue; \ - else + _rx_queue < &_efx->rx_queue[_efx->n_rx_queues]; \ + _rx_queue++) /* Iterate over all RX queues belonging to a channel */ #define efx_for_each_channel_rx_queue(_rx_queue, _channel) \ - for (_rx_queue = &_channel->efx->rx_queue[0]; \ - _rx_queue < &_channel->efx->rx_queue[EFX_MAX_RX_QUEUES]; \ - _rx_queue++) \ - if ((!_rx_queue->used) || \ - (_rx_queue->channel != _channel)) \ + for (_rx_queue = &_channel->efx->rx_queue[_channel->channel]; \ + _rx_queue; \ + _rx_queue = NULL) \ + if (_rx_queue->channel != _channel) \ continue; \ else @@ -886,13 +890,13 @@ static inline struct efx_rx_buffer *efx_rx_buffer(struct efx_rx_queue *rx_queue, } /* Set bit in a little-endian bitfield */ -static inline void set_bit_le(int nr, unsigned char *addr) +static inline void set_bit_le(unsigned nr, unsigned char *addr) { addr[nr / 8] |= (1 << (nr % 8)); } /* Clear bit in a little-endian bitfield */ -static inline void clear_bit_le(int nr, unsigned char *addr) +static inline void clear_bit_le(unsigned nr, unsigned char *addr) { addr[nr / 8] &= ~(1 << (nr % 8)); } diff --git a/drivers/net/sfc/phy.h b/drivers/net/sfc/phy.h index 9d02c84e6b2..f746536f4ff 100644 --- a/drivers/net/sfc/phy.h +++ b/drivers/net/sfc/phy.h @@ -15,15 +15,7 @@ */ extern struct efx_phy_operations falcon_tenxpress_phy_ops; -enum tenxpress_state { - TENXPRESS_STATUS_OFF = 0, - TENXPRESS_STATUS_OTEMP = 1, - TENXPRESS_STATUS_NORMAL = 2, -}; - -extern void tenxpress_set_state(struct efx_nic *efx, - enum tenxpress_state state); -extern void tenxpress_phy_blink(struct efx_nic *efx, int blink); +extern void tenxpress_phy_blink(struct efx_nic *efx, bool blink); extern void tenxpress_crc_err(struct efx_nic *efx); /**************************************************************************** diff --git a/drivers/net/sfc/rx.c b/drivers/net/sfc/rx.c index 0d27dd39bc0..0f805da4ce5 100644 --- a/drivers/net/sfc/rx.c +++ b/drivers/net/sfc/rx.c @@ -212,8 +212,8 @@ void efx_lro_fini(struct net_lro_mgr *lro_mgr) * and populates a struct efx_rx_buffer with the relevant * information. Return a negative error code or 0 on success. */ -static inline int efx_init_rx_buffer_skb(struct efx_rx_queue *rx_queue, - struct efx_rx_buffer *rx_buf) +static int efx_init_rx_buffer_skb(struct efx_rx_queue *rx_queue, + struct efx_rx_buffer *rx_buf) { struct efx_nic *efx = rx_queue->efx; struct net_device *net_dev = efx->net_dev; @@ -252,8 +252,8 @@ static inline int efx_init_rx_buffer_skb(struct efx_rx_queue *rx_queue, * and populates a struct efx_rx_buffer with the relevant * information. Return a negative error code or 0 on success. */ -static inline int efx_init_rx_buffer_page(struct efx_rx_queue *rx_queue, - struct efx_rx_buffer *rx_buf) +static int efx_init_rx_buffer_page(struct efx_rx_queue *rx_queue, + struct efx_rx_buffer *rx_buf) { struct efx_nic *efx = rx_queue->efx; int bytes, space, offset; @@ -319,8 +319,8 @@ static inline int efx_init_rx_buffer_page(struct efx_rx_queue *rx_queue, * and populates a struct efx_rx_buffer with the relevant * information. */ -static inline int efx_init_rx_buffer(struct efx_rx_queue *rx_queue, - struct efx_rx_buffer *new_rx_buf) +static int efx_init_rx_buffer(struct efx_rx_queue *rx_queue, + struct efx_rx_buffer *new_rx_buf) { int rc = 0; @@ -340,8 +340,8 @@ static inline int efx_init_rx_buffer(struct efx_rx_queue *rx_queue, return rc; } -static inline void efx_unmap_rx_buffer(struct efx_nic *efx, - struct efx_rx_buffer *rx_buf) +static void efx_unmap_rx_buffer(struct efx_nic *efx, + struct efx_rx_buffer *rx_buf) { if (rx_buf->page) { EFX_BUG_ON_PARANOID(rx_buf->skb); @@ -357,8 +357,8 @@ static inline void efx_unmap_rx_buffer(struct efx_nic *efx, } } -static inline void efx_free_rx_buffer(struct efx_nic *efx, - struct efx_rx_buffer *rx_buf) +static void efx_free_rx_buffer(struct efx_nic *efx, + struct efx_rx_buffer *rx_buf) { if (rx_buf->page) { __free_pages(rx_buf->page, efx->rx_buffer_order); @@ -369,8 +369,8 @@ static inline void efx_free_rx_buffer(struct efx_nic *efx, } } -static inline void efx_fini_rx_buffer(struct efx_rx_queue *rx_queue, - struct efx_rx_buffer *rx_buf) +static void efx_fini_rx_buffer(struct efx_rx_queue *rx_queue, + struct efx_rx_buffer *rx_buf) { efx_unmap_rx_buffer(rx_queue->efx, rx_buf); efx_free_rx_buffer(rx_queue->efx, rx_buf); @@ -506,10 +506,10 @@ void efx_rx_work(struct work_struct *data) efx_schedule_slow_fill(rx_queue, 1); } -static inline void efx_rx_packet__check_len(struct efx_rx_queue *rx_queue, - struct efx_rx_buffer *rx_buf, - int len, int *discard, - int *leak_packet) +static void efx_rx_packet__check_len(struct efx_rx_queue *rx_queue, + struct efx_rx_buffer *rx_buf, + int len, bool *discard, + bool *leak_packet) { struct efx_nic *efx = rx_queue->efx; unsigned max_len = rx_buf->len - efx->type->rx_buffer_padding; @@ -520,7 +520,7 @@ static inline void efx_rx_packet__check_len(struct efx_rx_queue *rx_queue, /* The packet must be discarded, but this is only a fatal error * if the caller indicated it was */ - *discard = 1; + *discard = true; if ((len > rx_buf->len) && EFX_WORKAROUND_8071(efx)) { EFX_ERR_RL(efx, " RX queue %d seriously overlength " @@ -546,8 +546,8 @@ static inline void efx_rx_packet__check_len(struct efx_rx_queue *rx_queue, * Handles driverlink veto, and passes the fragment up via * the appropriate LRO method */ -static inline void efx_rx_packet_lro(struct efx_channel *channel, - struct efx_rx_buffer *rx_buf) +static void efx_rx_packet_lro(struct efx_channel *channel, + struct efx_rx_buffer *rx_buf) { struct net_lro_mgr *lro_mgr = &channel->lro_mgr; void *priv = channel; @@ -574,9 +574,9 @@ static inline void efx_rx_packet_lro(struct efx_channel *channel, } /* Allocate and construct an SKB around a struct page.*/ -static inline struct sk_buff *efx_rx_mk_skb(struct efx_rx_buffer *rx_buf, - struct efx_nic *efx, - int hdr_len) +static struct sk_buff *efx_rx_mk_skb(struct efx_rx_buffer *rx_buf, + struct efx_nic *efx, + int hdr_len) { struct sk_buff *skb; @@ -621,11 +621,11 @@ static inline struct sk_buff *efx_rx_mk_skb(struct efx_rx_buffer *rx_buf, } void efx_rx_packet(struct efx_rx_queue *rx_queue, unsigned int index, - unsigned int len, int checksummed, int discard) + unsigned int len, bool checksummed, bool discard) { struct efx_nic *efx = rx_queue->efx; struct efx_rx_buffer *rx_buf; - int leak_packet = 0; + bool leak_packet = false; rx_buf = efx_rx_buffer(rx_queue, index); EFX_BUG_ON_PARANOID(!rx_buf->data); @@ -683,11 +683,11 @@ void efx_rx_packet(struct efx_rx_queue *rx_queue, unsigned int index, /* Handle a received packet. Second half: Touches packet payload. */ void __efx_rx_packet(struct efx_channel *channel, - struct efx_rx_buffer *rx_buf, int checksummed) + struct efx_rx_buffer *rx_buf, bool checksummed) { struct efx_nic *efx = channel->efx; struct sk_buff *skb; - int lro = efx->net_dev->features & NETIF_F_LRO; + bool lro = !!(efx->net_dev->features & NETIF_F_LRO); /* If we're in loopback test, then pass the packet directly to the * loopback layer, and free the rx_buf here @@ -789,27 +789,18 @@ int efx_probe_rx_queue(struct efx_rx_queue *rx_queue) /* Allocate RX buffers */ rxq_size = (efx->type->rxd_ring_mask + 1) * sizeof(*rx_queue->buffer); rx_queue->buffer = kzalloc(rxq_size, GFP_KERNEL); - if (!rx_queue->buffer) { - rc = -ENOMEM; - goto fail1; - } + if (!rx_queue->buffer) + return -ENOMEM; rc = falcon_probe_rx(rx_queue); - if (rc) - goto fail2; - - return 0; - - fail2: - kfree(rx_queue->buffer); - rx_queue->buffer = NULL; - fail1: - rx_queue->used = 0; - + if (rc) { + kfree(rx_queue->buffer); + rx_queue->buffer = NULL; + } return rc; } -int efx_init_rx_queue(struct efx_rx_queue *rx_queue) +void efx_init_rx_queue(struct efx_rx_queue *rx_queue) { struct efx_nic *efx = rx_queue->efx; unsigned int max_fill, trigger, limit; @@ -833,7 +824,7 @@ int efx_init_rx_queue(struct efx_rx_queue *rx_queue) rx_queue->fast_fill_limit = limit; /* Set up RX descriptor ring */ - return falcon_init_rx(rx_queue); + falcon_init_rx(rx_queue); } void efx_fini_rx_queue(struct efx_rx_queue *rx_queue) @@ -872,7 +863,6 @@ void efx_remove_rx_queue(struct efx_rx_queue *rx_queue) kfree(rx_queue->buffer); rx_queue->buffer = NULL; - rx_queue->used = 0; } void efx_flush_lro(struct efx_channel *channel) diff --git a/drivers/net/sfc/rx.h b/drivers/net/sfc/rx.h index f35e377bfc5..0e88a9ddc1c 100644 --- a/drivers/net/sfc/rx.h +++ b/drivers/net/sfc/rx.h @@ -14,7 +14,7 @@ int efx_probe_rx_queue(struct efx_rx_queue *rx_queue); void efx_remove_rx_queue(struct efx_rx_queue *rx_queue); -int efx_init_rx_queue(struct efx_rx_queue *rx_queue); +void efx_init_rx_queue(struct efx_rx_queue *rx_queue); void efx_fini_rx_queue(struct efx_rx_queue *rx_queue); int efx_lro_init(struct net_lro_mgr *lro_mgr, struct efx_nic *efx); @@ -24,6 +24,6 @@ void efx_rx_strategy(struct efx_channel *channel); void efx_fast_push_rx_descriptors(struct efx_rx_queue *rx_queue); void efx_rx_work(struct work_struct *data); void __efx_rx_packet(struct efx_channel *channel, - struct efx_rx_buffer *rx_buf, int checksummed); + struct efx_rx_buffer *rx_buf, bool checksummed); #endif /* EFX_RX_H */ diff --git a/drivers/net/sfc/selftest.c b/drivers/net/sfc/selftest.c index 3b2de9fe7f2..362956e3fe1 100644 --- a/drivers/net/sfc/selftest.c +++ b/drivers/net/sfc/selftest.c @@ -27,6 +27,9 @@ #include "boards.h" #include "workarounds.h" #include "mac.h" +#include "spi.h" +#include "falcon_io.h" +#include "mdio_10g.h" /* * Loopback test packet structure @@ -51,7 +54,7 @@ static const char *payload_msg = "Hello world! This is an Efx loopback test in progress!"; /** - * efx_selftest_state - persistent state during a selftest + * efx_loopback_state - persistent state during a loopback selftest * @flush: Drop all packets in efx_loopback_rx_packet * @packet_count: Number of packets being used in this test * @skbs: An array of skbs transmitted @@ -59,10 +62,14 @@ static const char *payload_msg = * @rx_bad: RX bad packet count * @payload: Payload used in tests */ -struct efx_selftest_state { - int flush; +struct efx_loopback_state { + bool flush; int packet_count; struct sk_buff **skbs; + + /* Checksums are being offloaded */ + bool offload_csum; + atomic_t rx_good; atomic_t rx_bad; struct efx_loopback_payload payload; @@ -70,21 +77,65 @@ struct efx_selftest_state { /************************************************************************** * - * Configurable values + * MII, NVRAM and register tests * **************************************************************************/ -/* Level of loopback testing - * - * The maximum packet burst length is 16**(n-1), i.e. - * - * - Level 0 : no packets - * - Level 1 : 1 packet - * - Level 2 : 17 packets (1 * 1 packet, 1 * 16 packets) - * - Level 3 : 273 packets (1 * 1 packet, 1 * 16 packet, 1 * 256 packets) - * - */ -static unsigned int loopback_test_level = 3; +static int efx_test_mii(struct efx_nic *efx, struct efx_self_tests *tests) +{ + int rc = 0; + u16 physid1, physid2; + struct mii_if_info *mii = &efx->mii; + struct net_device *net_dev = efx->net_dev; + + if (efx->phy_type == PHY_TYPE_NONE) + return 0; + + mutex_lock(&efx->mac_lock); + tests->mii = -1; + + physid1 = mii->mdio_read(net_dev, mii->phy_id, MII_PHYSID1); + physid2 = mii->mdio_read(net_dev, mii->phy_id, MII_PHYSID2); + + if ((physid1 == 0x0000) || (physid1 == 0xffff) || + (physid2 == 0x0000) || (physid2 == 0xffff)) { + EFX_ERR(efx, "no MII PHY present with ID %d\n", + mii->phy_id); + rc = -EINVAL; + goto out; + } + + rc = mdio_clause45_check_mmds(efx, efx->phy_op->mmds, 0); + if (rc) + goto out; + +out: + mutex_unlock(&efx->mac_lock); + tests->mii = rc ? -1 : 1; + return rc; +} + +static int efx_test_nvram(struct efx_nic *efx, struct efx_self_tests *tests) +{ + int rc; + + rc = falcon_read_nvram(efx, NULL); + tests->nvram = rc ? -1 : 1; + return rc; +} + +static int efx_test_chip(struct efx_nic *efx, struct efx_self_tests *tests) +{ + int rc; + + /* Not supported on A-series silicon */ + if (falcon_rev(efx) < FALCON_REV_B0) + return 0; + + rc = falcon_test_registers(efx); + tests->registers = rc ? -1 : 1; + return rc; +} /************************************************************************** * @@ -107,7 +158,7 @@ static int efx_test_interrupts(struct efx_nic *efx, /* ACK each interrupting event queue. Receiving an interrupt due to * traffic before a test event is raised is considered a pass */ - efx_for_each_channel_with_interrupt(channel, efx) { + efx_for_each_channel(channel, efx) { if (channel->work_pending) efx_process_channel_now(channel); if (efx->last_irq_cpu >= 0) @@ -132,41 +183,6 @@ static int efx_test_interrupts(struct efx_nic *efx, return 0; } -/* Test generation and receipt of non-interrupting events */ -static int efx_test_eventq(struct efx_channel *channel, - struct efx_self_tests *tests) -{ - unsigned int magic; - - /* Channel specific code, limited to 20 bits */ - magic = (0x00010150 + channel->channel); - EFX_LOG(channel->efx, "channel %d testing event queue with code %x\n", - channel->channel, magic); - - tests->eventq_dma[channel->channel] = -1; - tests->eventq_int[channel->channel] = 1; /* fake pass */ - tests->eventq_poll[channel->channel] = 1; /* fake pass */ - - /* Reset flag and zero magic word */ - channel->efx->last_irq_cpu = -1; - channel->eventq_magic = 0; - smp_wmb(); - - falcon_generate_test_event(channel, magic); - udelay(1); - - efx_process_channel_now(channel); - if (channel->eventq_magic != magic) { - EFX_ERR(channel->efx, "channel %d failed to see test event\n", - channel->channel); - return -ETIMEDOUT; - } else { - tests->eventq_dma[channel->channel] = 1; - } - - return 0; -} - /* Test generation and receipt of interrupting events */ static int efx_test_eventq_irq(struct efx_channel *channel, struct efx_self_tests *tests) @@ -230,39 +246,18 @@ static int efx_test_eventq_irq(struct efx_channel *channel, return 0; } -/************************************************************************** - * - * PHY testing - * - **************************************************************************/ - -/* Check PHY presence by reading the PHY ID registers */ -static int efx_test_phy(struct efx_nic *efx, - struct efx_self_tests *tests) +static int efx_test_phy(struct efx_nic *efx, struct efx_self_tests *tests) { - u16 physid1, physid2; - struct mii_if_info *mii = &efx->mii; - struct net_device *net_dev = efx->net_dev; + int rc; - if (efx->phy_type == PHY_TYPE_NONE) + if (!efx->phy_op->test) return 0; - EFX_LOG(efx, "testing PHY presence\n"); - tests->phy_ok = -1; - - physid1 = mii->mdio_read(net_dev, mii->phy_id, MII_PHYSID1); - physid2 = mii->mdio_read(net_dev, mii->phy_id, MII_PHYSID2); - - if ((physid1 != 0x0000) && (physid1 != 0xffff) && - (physid2 != 0x0000) && (physid2 != 0xffff)) { - EFX_LOG(efx, "found MII PHY %d ID 0x%x:%x\n", - mii->phy_id, physid1, physid2); - tests->phy_ok = 1; - return 0; - } - - EFX_ERR(efx, "no MII PHY present with ID %d\n", mii->phy_id); - return -ENODEV; + mutex_lock(&efx->mac_lock); + rc = efx->phy_op->test(efx); + mutex_unlock(&efx->mac_lock); + tests->phy = rc ? -1 : 1; + return rc; } /************************************************************************** @@ -278,7 +273,7 @@ static int efx_test_phy(struct efx_nic *efx, void efx_loopback_rx_packet(struct efx_nic *efx, const char *buf_ptr, int pkt_len) { - struct efx_selftest_state *state = efx->loopback_selftest; + struct efx_loopback_state *state = efx->loopback_selftest; struct efx_loopback_payload *received; struct efx_loopback_payload *payload; @@ -289,11 +284,12 @@ void efx_loopback_rx_packet(struct efx_nic *efx, return; payload = &state->payload; - + received = (struct efx_loopback_payload *) buf_ptr; received->ip.saddr = payload->ip.saddr; - received->ip.check = payload->ip.check; - + if (state->offload_csum) + received->ip.check = payload->ip.check; + /* Check that header exists */ if (pkt_len < sizeof(received->header)) { EFX_ERR(efx, "saw runt RX packet (length %d) in %s loopback " @@ -362,7 +358,7 @@ void efx_loopback_rx_packet(struct efx_nic *efx, /* Initialise an efx_selftest_state for a new iteration */ static void efx_iterate_state(struct efx_nic *efx) { - struct efx_selftest_state *state = efx->loopback_selftest; + struct efx_loopback_state *state = efx->loopback_selftest; struct net_device *net_dev = efx->net_dev; struct efx_loopback_payload *payload = &state->payload; @@ -395,17 +391,17 @@ static void efx_iterate_state(struct efx_nic *efx) smp_wmb(); } -static int efx_tx_loopback(struct efx_tx_queue *tx_queue) +static int efx_begin_loopback(struct efx_tx_queue *tx_queue) { struct efx_nic *efx = tx_queue->efx; - struct efx_selftest_state *state = efx->loopback_selftest; + struct efx_loopback_state *state = efx->loopback_selftest; struct efx_loopback_payload *payload; struct sk_buff *skb; int i, rc; /* Transmit N copies of buffer */ for (i = 0; i < state->packet_count; i++) { - /* Allocate an skb, holding an extra reference for + /* Allocate an skb, holding an extra reference for * transmit completion counting */ skb = alloc_skb(sizeof(state->payload), GFP_KERNEL); if (!skb) @@ -444,11 +440,25 @@ static int efx_tx_loopback(struct efx_tx_queue *tx_queue) return 0; } -static int efx_rx_loopback(struct efx_tx_queue *tx_queue, - struct efx_loopback_self_tests *lb_tests) +static int efx_poll_loopback(struct efx_nic *efx) +{ + struct efx_loopback_state *state = efx->loopback_selftest; + struct efx_channel *channel; + + /* NAPI polling is not enabled, so process channels + * synchronously */ + efx_for_each_channel(channel, efx) { + if (channel->work_pending) + efx_process_channel_now(channel); + } + return atomic_read(&state->rx_good) == state->packet_count; +} + +static int efx_end_loopback(struct efx_tx_queue *tx_queue, + struct efx_loopback_self_tests *lb_tests) { struct efx_nic *efx = tx_queue->efx; - struct efx_selftest_state *state = efx->loopback_selftest; + struct efx_loopback_state *state = efx->loopback_selftest; struct sk_buff *skb; int tx_done = 0, rx_good, rx_bad; int i, rc = 0; @@ -507,11 +517,10 @@ efx_test_loopback(struct efx_tx_queue *tx_queue, struct efx_loopback_self_tests *lb_tests) { struct efx_nic *efx = tx_queue->efx; - struct efx_selftest_state *state = efx->loopback_selftest; - struct efx_channel *channel; - int i, rc = 0; + struct efx_loopback_state *state = efx->loopback_selftest; + int i, begin_rc, end_rc; - for (i = 0; i < loopback_test_level; i++) { + for (i = 0; i < 3; i++) { /* Determine how many packets to send */ state->packet_count = (efx->type->txd_ring_mask + 1) / 3; state->packet_count = min(1 << (i << 2), state->packet_count); @@ -519,30 +528,31 @@ efx_test_loopback(struct efx_tx_queue *tx_queue, state->packet_count, GFP_KERNEL); if (!state->skbs) return -ENOMEM; - state->flush = 0; + state->flush = false; EFX_LOG(efx, "TX queue %d testing %s loopback with %d " "packets\n", tx_queue->queue, LOOPBACK_MODE(efx), state->packet_count); efx_iterate_state(efx); - rc = efx_tx_loopback(tx_queue); - - /* NAPI polling is not enabled, so process channels synchronously */ - schedule_timeout_uninterruptible(HZ / 50); - efx_for_each_channel_with_interrupt(channel, efx) { - if (channel->work_pending) - efx_process_channel_now(channel); + begin_rc = efx_begin_loopback(tx_queue); + + /* This will normally complete very quickly, but be + * prepared to wait up to 100 ms. */ + msleep(1); + if (!efx_poll_loopback(efx)) { + msleep(100); + efx_poll_loopback(efx); } - rc |= efx_rx_loopback(tx_queue, lb_tests); + end_rc = efx_end_loopback(tx_queue, lb_tests); kfree(state->skbs); - if (rc) { + if (begin_rc || end_rc) { /* Wait a while to ensure there are no packets * floating around after a failure. */ schedule_timeout_uninterruptible(HZ / 10); - return rc; + return begin_rc ? begin_rc : end_rc; } } @@ -550,49 +560,36 @@ efx_test_loopback(struct efx_tx_queue *tx_queue, "of %d packets\n", tx_queue->queue, LOOPBACK_MODE(efx), state->packet_count); - return rc; + return 0; } -static int efx_test_loopbacks(struct efx_nic *efx, +static int efx_test_loopbacks(struct efx_nic *efx, struct ethtool_cmd ecmd, struct efx_self_tests *tests, unsigned int loopback_modes) { - struct efx_selftest_state *state = efx->loopback_selftest; - struct ethtool_cmd ecmd, ecmd_loopback; + enum efx_loopback_mode mode; + struct efx_loopback_state *state; struct efx_tx_queue *tx_queue; - enum efx_loopback_mode old_mode, mode; - int count, rc = 0, link_up; - - rc = efx_ethtool_get_settings(efx->net_dev, &ecmd); - if (rc) { - EFX_ERR(efx, "could not get GMII settings\n"); - return rc; - } - old_mode = efx->loopback_mode; - - /* Disable autonegotiation for the purposes of loopback */ - memcpy(&ecmd_loopback, &ecmd, sizeof(ecmd_loopback)); - if (ecmd_loopback.autoneg == AUTONEG_ENABLE) { - ecmd_loopback.autoneg = AUTONEG_DISABLE; - ecmd_loopback.duplex = DUPLEX_FULL; - ecmd_loopback.speed = SPEED_10000; - } + bool link_up; + int count, rc = 0; - rc = efx_ethtool_set_settings(efx->net_dev, &ecmd_loopback); - if (rc) { - EFX_ERR(efx, "could not disable autonegotiation\n"); - goto out; - } - tests->loopback_speed = ecmd_loopback.speed; - tests->loopback_full_duplex = ecmd_loopback.duplex; + /* Set the port loopback_selftest member. From this point on + * all received packets will be dropped. Mark the state as + * "flushing" so all inflight packets are dropped */ + state = kzalloc(sizeof(*state), GFP_KERNEL); + if (state == NULL) + return -ENOMEM; + BUG_ON(efx->loopback_selftest); + state->flush = true; + efx->loopback_selftest = state; /* Test all supported loopback modes */ - for (mode = LOOPBACK_NONE; mode < LOOPBACK_TEST_MAX; mode++) { + for (mode = LOOPBACK_NONE; mode <= LOOPBACK_TEST_MAX; mode++) { if (!(loopback_modes & (1 << mode))) continue; /* Move the port into the specified loopback mode. */ - state->flush = 1; + state->flush = true; efx->loopback_mode = mode; efx_reconfigure_port(efx); @@ -616,7 +613,7 @@ static int efx_test_loopbacks(struct efx_nic *efx, */ link_up = efx->link_up; if (!falcon_xaui_link_ok(efx)) - link_up = 0; + link_up = false; } while ((++count < 20) && !link_up); @@ -634,18 +631,21 @@ static int efx_test_loopbacks(struct efx_nic *efx, /* Test every TX queue */ efx_for_each_tx_queue(tx_queue, efx) { - rc |= efx_test_loopback(tx_queue, - &tests->loopback[mode]); + state->offload_csum = (tx_queue->queue == + EFX_TX_QUEUE_OFFLOAD_CSUM); + rc = efx_test_loopback(tx_queue, + &tests->loopback[mode]); if (rc) goto out; } } out: - /* Take out of loopback and restore PHY settings */ - state->flush = 1; - efx->loopback_mode = old_mode; - efx_ethtool_set_settings(efx->net_dev, &ecmd); + /* Remove the flush. The caller will remove the loopback setting */ + state->flush = true; + efx->loopback_selftest = NULL; + wmb(); + kfree(state); return rc; } @@ -661,23 +661,27 @@ static int efx_test_loopbacks(struct efx_nic *efx, int efx_online_test(struct efx_nic *efx, struct efx_self_tests *tests) { struct efx_channel *channel; - int rc = 0; + int rc, rc2 = 0; + + rc = efx_test_mii(efx, tests); + if (rc && !rc2) + rc2 = rc; - EFX_LOG(efx, "performing online self-tests\n"); + rc = efx_test_nvram(efx, tests); + if (rc && !rc2) + rc2 = rc; + + rc = efx_test_interrupts(efx, tests); + if (rc && !rc2) + rc2 = rc; - rc |= efx_test_interrupts(efx, tests); efx_for_each_channel(channel, efx) { - if (channel->has_interrupt) - rc |= efx_test_eventq_irq(channel, tests); - else - rc |= efx_test_eventq(channel, tests); + rc = efx_test_eventq_irq(channel, tests); + if (rc && !rc2) + rc2 = rc; } - rc |= efx_test_phy(efx, tests); - - if (rc) - EFX_ERR(efx, "failed online self-tests\n"); - return rc; + return rc2; } /* Offline (i.e. disruptive) testing @@ -685,35 +689,66 @@ int efx_online_test(struct efx_nic *efx, struct efx_self_tests *tests) int efx_offline_test(struct efx_nic *efx, struct efx_self_tests *tests, unsigned int loopback_modes) { - struct efx_selftest_state *state; - int rc = 0; - - EFX_LOG(efx, "performing offline self-tests\n"); + enum efx_loopback_mode loopback_mode = efx->loopback_mode; + int phy_mode = efx->phy_mode; + struct ethtool_cmd ecmd, ecmd_test; + int rc, rc2 = 0; + + /* force the carrier state off so the kernel doesn't transmit during + * the loopback test, and the watchdog timeout doesn't fire. Also put + * falcon into loopback for the register test. + */ + mutex_lock(&efx->mac_lock); + efx->port_inhibited = true; + if (efx->loopback_modes) + efx->loopback_mode = __ffs(efx->loopback_modes); + __efx_reconfigure_port(efx); + mutex_unlock(&efx->mac_lock); + + /* free up all consumers of SRAM (including all the queues) */ + efx_reset_down(efx, &ecmd); + + rc = efx_test_chip(efx, tests); + if (rc && !rc2) + rc2 = rc; + + /* reset the chip to recover from the register test */ + rc = falcon_reset_hw(efx, RESET_TYPE_ALL); + + /* Modify the saved ecmd so that when efx_reset_up() restores the phy + * state, AN is disabled, and the phy is powered, and out of loopback */ + memcpy(&ecmd_test, &ecmd, sizeof(ecmd_test)); + if (ecmd_test.autoneg == AUTONEG_ENABLE) { + ecmd_test.autoneg = AUTONEG_DISABLE; + ecmd_test.duplex = DUPLEX_FULL; + ecmd_test.speed = SPEED_10000; + } + efx->loopback_mode = LOOPBACK_NONE; - /* Create a selftest_state structure to hold state for the test */ - state = kzalloc(sizeof(*state), GFP_KERNEL); - if (state == NULL) { - rc = -ENOMEM; - goto out; + rc = efx_reset_up(efx, &ecmd_test, rc == 0); + if (rc) { + EFX_ERR(efx, "Unable to recover from chip test\n"); + efx_schedule_reset(efx, RESET_TYPE_DISABLE); + return rc; } - /* Set the port loopback_selftest member. From this point on - * all received packets will be dropped. Mark the state as - * "flushing" so all inflight packets are dropped */ - BUG_ON(efx->loopback_selftest); - state->flush = 1; - efx->loopback_selftest = state; + tests->loopback_speed = ecmd_test.speed; + tests->loopback_full_duplex = ecmd_test.duplex; - rc = efx_test_loopbacks(efx, tests, loopback_modes); + rc = efx_test_phy(efx, tests); + if (rc && !rc2) + rc2 = rc; - efx->loopback_selftest = NULL; - wmb(); - kfree(state); + rc = efx_test_loopbacks(efx, ecmd_test, tests, loopback_modes); + if (rc && !rc2) + rc2 = rc; - out: - if (rc) - EFX_ERR(efx, "failed offline self-tests\n"); + /* restore the PHY to the previous state */ + efx->loopback_mode = loopback_mode; + efx->phy_mode = phy_mode; + efx->port_inhibited = false; + efx_ethtool_set_settings(efx->net_dev, &ecmd); - return rc; + return rc2; } diff --git a/drivers/net/sfc/selftest.h b/drivers/net/sfc/selftest.h index f6999c2b622..fc15df15d76 100644 --- a/drivers/net/sfc/selftest.h +++ b/drivers/net/sfc/selftest.h @@ -18,8 +18,8 @@ */ struct efx_loopback_self_tests { - int tx_sent[EFX_MAX_TX_QUEUES]; - int tx_done[EFX_MAX_TX_QUEUES]; + int tx_sent[EFX_TX_QUEUE_COUNT]; + int tx_done[EFX_TX_QUEUE_COUNT]; int rx_good; int rx_bad; }; @@ -29,14 +29,19 @@ struct efx_loopback_self_tests { * indicates failure. */ struct efx_self_tests { + /* online tests */ + int mii; + int nvram; int interrupt; int eventq_dma[EFX_MAX_CHANNELS]; int eventq_int[EFX_MAX_CHANNELS]; int eventq_poll[EFX_MAX_CHANNELS]; - int phy_ok; + /* offline tests */ + int registers; + int phy; int loopback_speed; int loopback_full_duplex; - struct efx_loopback_self_tests loopback[LOOPBACK_TEST_MAX]; + struct efx_loopback_self_tests loopback[LOOPBACK_TEST_MAX + 1]; }; extern void efx_loopback_rx_packet(struct efx_nic *efx, diff --git a/drivers/net/sfc/sfe4001.c b/drivers/net/sfc/sfe4001.c index b2784952399..b7005da55d5 100644 --- a/drivers/net/sfc/sfe4001.c +++ b/drivers/net/sfc/sfe4001.c @@ -13,11 +13,13 @@ * the PHY */ #include <linux/delay.h> +#include "net_driver.h" #include "efx.h" #include "phy.h" #include "boards.h" #include "falcon.h" #include "falcon_hwdefs.h" +#include "falcon_io.h" #include "mac.h" /************************************************************************** @@ -120,111 +122,63 @@ static void sfe4001_poweroff(struct efx_nic *efx) i2c_smbus_read_byte_data(hwmon_client, RSL); } -static void sfe4001_fini(struct efx_nic *efx) -{ - EFX_INFO(efx, "%s\n", __func__); - - sfe4001_poweroff(efx); - i2c_unregister_device(efx->board_info.ioexp_client); - i2c_unregister_device(efx->board_info.hwmon_client); -} - -/* The P0_EN_3V3X line on SFE4001 boards (from A2 onward) is connected - * to the FLASH_CFG_1 input on the DSP. We must keep it high at power- - * up to allow writing the flash (done through MDIO from userland). - */ -unsigned int sfe4001_phy_flash_cfg; -module_param_named(phy_flash_cfg, sfe4001_phy_flash_cfg, uint, 0444); -MODULE_PARM_DESC(phy_flash_cfg, - "Force PHY to enter flash configuration mode"); - -/* This board uses an I2C expander to provider power to the PHY, which needs to - * be turned on before the PHY can be used. - * Context: Process context, rtnl lock held - */ -int sfe4001_init(struct efx_nic *efx) +static int sfe4001_poweron(struct efx_nic *efx) { - struct i2c_client *hwmon_client, *ioexp_client; - unsigned int count; + struct i2c_client *hwmon_client = efx->board_info.hwmon_client; + struct i2c_client *ioexp_client = efx->board_info.ioexp_client; + unsigned int i, j; int rc; u8 out; - efx_dword_t reg; - - hwmon_client = i2c_new_dummy(&efx->i2c_adap, MAX6647); - if (!hwmon_client) - return -EIO; - efx->board_info.hwmon_client = hwmon_client; - - ioexp_client = i2c_new_dummy(&efx->i2c_adap, PCA9539); - if (!ioexp_client) { - rc = -EIO; - goto fail_hwmon; - } - efx->board_info.ioexp_client = ioexp_client; - - /* 10Xpress has fixed-function LED pins, so there is no board-specific - * blink code. */ - efx->board_info.blink = tenxpress_phy_blink; + efx_oword_t reg; /* Ensure that XGXS and XAUI SerDes are held in reset */ - EFX_POPULATE_DWORD_7(reg, XX_PWRDNA_EN, 1, + EFX_POPULATE_OWORD_7(reg, XX_PWRDNA_EN, 1, XX_PWRDNB_EN, 1, XX_RSTPLLAB_EN, 1, XX_RESETA_EN, 1, XX_RESETB_EN, 1, XX_RSTXGXSRX_EN, 1, XX_RSTXGXSTX_EN, 1); - falcon_xmac_writel(efx, ®, XX_PWR_RST_REG_MAC); + falcon_write(efx, ®, XX_PWR_RST_REG); udelay(10); - efx->board_info.fini = sfe4001_fini; - - /* Set DSP over-temperature alert threshold */ - EFX_INFO(efx, "DSP cut-out at %dC\n", xgphy_max_temperature); - rc = i2c_smbus_write_byte_data(hwmon_client, WLHO, - xgphy_max_temperature); - if (rc) - goto fail_ioexp; - - /* Read it back and verify */ - rc = i2c_smbus_read_byte_data(hwmon_client, RLHN); - if (rc < 0) - goto fail_ioexp; - if (rc != xgphy_max_temperature) { - rc = -EFAULT; - goto fail_ioexp; - } - /* Clear any previous over-temperature alert */ rc = i2c_smbus_read_byte_data(hwmon_client, RSL); if (rc < 0) - goto fail_ioexp; + return rc; /* Enable port 0 and port 1 outputs on IO expander */ rc = i2c_smbus_write_byte_data(ioexp_client, P0_CONFIG, 0x00); if (rc) - goto fail_ioexp; + return rc; rc = i2c_smbus_write_byte_data(ioexp_client, P1_CONFIG, 0xff & ~(1 << P1_SPARE_LBN)); if (rc) goto fail_on; - /* Turn all power off then wait 1 sec. This ensures PHY is reset */ + /* If PHY power is on, turn it all off and wait 1 second to + * ensure a full reset. + */ + rc = i2c_smbus_read_byte_data(ioexp_client, P0_OUT); + if (rc < 0) + goto fail_on; out = 0xff & ~((0 << P0_EN_1V2_LBN) | (0 << P0_EN_2V5_LBN) | (0 << P0_EN_3V3X_LBN) | (0 << P0_EN_5V_LBN) | (0 << P0_EN_1V0X_LBN)); - rc = i2c_smbus_write_byte_data(ioexp_client, P0_OUT, out); - if (rc) - goto fail_on; + if (rc != out) { + EFX_INFO(efx, "power-cycling PHY\n"); + rc = i2c_smbus_write_byte_data(ioexp_client, P0_OUT, out); + if (rc) + goto fail_on; + schedule_timeout_uninterruptible(HZ); + } - schedule_timeout_uninterruptible(HZ); - count = 0; - do { + for (i = 0; i < 20; ++i) { /* Turn on 1.2V, 2.5V, 3.3V and 5V power rails */ out = 0xff & ~((1 << P0_EN_1V2_LBN) | (1 << P0_EN_2V5_LBN) | (1 << P0_EN_3V3X_LBN) | (1 << P0_EN_5V_LBN) | (1 << P0_X_TRST_LBN)); - if (sfe4001_phy_flash_cfg) + if (efx->phy_mode & PHY_MODE_SPECIAL) out |= 1 << P0_EN_3V3X_LBN; rc = i2c_smbus_write_byte_data(ioexp_client, P0_OUT, out); @@ -238,35 +192,145 @@ int sfe4001_init(struct efx_nic *efx) if (rc) goto fail_on; - EFX_INFO(efx, "waiting for power (attempt %d)...\n", count); + EFX_INFO(efx, "waiting for DSP boot (attempt %d)...\n", i); + + /* In flash config mode, DSP does not turn on AFE, so + * just wait 1 second. + */ + if (efx->phy_mode & PHY_MODE_SPECIAL) { + schedule_timeout_uninterruptible(HZ); + return 0; + } + + for (j = 0; j < 10; ++j) { + msleep(100); + + /* Check DSP has asserted AFE power line */ + rc = i2c_smbus_read_byte_data(ioexp_client, P1_IN); + if (rc < 0) + goto fail_on; + if (rc & (1 << P1_AFE_PWD_LBN)) + return 0; + } + } - schedule_timeout_uninterruptible(HZ); + EFX_INFO(efx, "timed out waiting for DSP boot\n"); + rc = -ETIMEDOUT; +fail_on: + sfe4001_poweroff(efx); + return rc; +} - /* Check DSP is powered */ - rc = i2c_smbus_read_byte_data(ioexp_client, P1_IN); - if (rc < 0) - goto fail_on; - if (rc & (1 << P1_AFE_PWD_LBN)) - goto done; +/* On SFE4001 rev A2 and later, we can control the FLASH_CFG_1 pin + * using the 3V3X output of the IO-expander. Allow the user to set + * this when the device is stopped, and keep it stopped then. + */ - /* DSP doesn't look powered in flash config mode */ - if (sfe4001_phy_flash_cfg) - goto done; - } while (++count < 20); +static ssize_t show_phy_flash_cfg(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct efx_nic *efx = pci_get_drvdata(to_pci_dev(dev)); + return sprintf(buf, "%d\n", !!(efx->phy_mode & PHY_MODE_SPECIAL)); +} - EFX_INFO(efx, "timed out waiting for power\n"); - rc = -ETIMEDOUT; - goto fail_on; +static ssize_t set_phy_flash_cfg(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct efx_nic *efx = pci_get_drvdata(to_pci_dev(dev)); + enum efx_phy_mode old_mode, new_mode; + int err; + + rtnl_lock(); + old_mode = efx->phy_mode; + if (count == 0 || *buf == '0') + new_mode = old_mode & ~PHY_MODE_SPECIAL; + else + new_mode = PHY_MODE_SPECIAL; + if (old_mode == new_mode) { + err = 0; + } else if (efx->state != STATE_RUNNING || netif_running(efx->net_dev)) { + err = -EBUSY; + } else { + efx->phy_mode = new_mode; + err = sfe4001_poweron(efx); + efx_reconfigure_port(efx); + } + rtnl_unlock(); + + return err ? err : count; +} + +static DEVICE_ATTR(phy_flash_cfg, 0644, show_phy_flash_cfg, set_phy_flash_cfg); + +static void sfe4001_fini(struct efx_nic *efx) +{ + EFX_INFO(efx, "%s\n", __func__); + + device_remove_file(&efx->pci_dev->dev, &dev_attr_phy_flash_cfg); + sfe4001_poweroff(efx); + i2c_unregister_device(efx->board_info.ioexp_client); + i2c_unregister_device(efx->board_info.hwmon_client); +} + +/* This board uses an I2C expander to provider power to the PHY, which needs to + * be turned on before the PHY can be used. + * Context: Process context, rtnl lock held + */ +int sfe4001_init(struct efx_nic *efx) +{ + struct i2c_client *hwmon_client; + int rc; + + hwmon_client = i2c_new_dummy(&efx->i2c_adap, MAX6647); + if (!hwmon_client) + return -EIO; + efx->board_info.hwmon_client = hwmon_client; + + /* Set DSP over-temperature alert threshold */ + EFX_INFO(efx, "DSP cut-out at %dC\n", xgphy_max_temperature); + rc = i2c_smbus_write_byte_data(hwmon_client, WLHO, + xgphy_max_temperature); + if (rc) + goto fail_ioexp; + + /* Read it back and verify */ + rc = i2c_smbus_read_byte_data(hwmon_client, RLHN); + if (rc < 0) + goto fail_ioexp; + if (rc != xgphy_max_temperature) { + rc = -EFAULT; + goto fail_ioexp; + } + + efx->board_info.ioexp_client = i2c_new_dummy(&efx->i2c_adap, PCA9539); + if (!efx->board_info.ioexp_client) { + rc = -EIO; + goto fail_hwmon; + } + + /* 10Xpress has fixed-function LED pins, so there is no board-specific + * blink code. */ + efx->board_info.blink = tenxpress_phy_blink; + + efx->board_info.fini = sfe4001_fini; + + rc = sfe4001_poweron(efx); + if (rc) + goto fail_ioexp; + + rc = device_create_file(&efx->pci_dev->dev, &dev_attr_phy_flash_cfg); + if (rc) + goto fail_on; -done: EFX_INFO(efx, "PHY is powered on\n"); return 0; fail_on: sfe4001_poweroff(efx); fail_ioexp: - i2c_unregister_device(ioexp_client); + i2c_unregister_device(efx->board_info.ioexp_client); fail_hwmon: - i2c_unregister_device(hwmon_client); + i2c_unregister_device(hwmon_client); return rc; } diff --git a/drivers/net/sfc/spi.h b/drivers/net/sfc/spi.h index 34412f3d41c..feef6194237 100644 --- a/drivers/net/sfc/spi.h +++ b/drivers/net/sfc/spi.h @@ -19,53 +19,48 @@ * *************************************************************************/ -/* - * Commands common to all known devices. - * +#define SPI_WRSR 0x01 /* Write status register */ +#define SPI_WRITE 0x02 /* Write data to memory array */ +#define SPI_READ 0x03 /* Read data from memory array */ +#define SPI_WRDI 0x04 /* Reset write enable latch */ +#define SPI_RDSR 0x05 /* Read status register */ +#define SPI_WREN 0x06 /* Set write enable latch */ + +#define SPI_STATUS_WPEN 0x80 /* Write-protect pin enabled */ +#define SPI_STATUS_BP2 0x10 /* Block protection bit 2 */ +#define SPI_STATUS_BP1 0x08 /* Block protection bit 1 */ +#define SPI_STATUS_BP0 0x04 /* Block protection bit 0 */ +#define SPI_STATUS_WEN 0x02 /* State of the write enable latch */ +#define SPI_STATUS_NRDY 0x01 /* Device busy flag */ + +/** + * struct efx_spi_device - an Efx SPI (Serial Peripheral Interface) device + * @efx: The Efx controller that owns this device + * @device_id: Controller's id for the device + * @size: Size (in bytes) + * @addr_len: Number of address bytes in read/write commands + * @munge_address: Flag whether addresses should be munged. + * Some devices with 9-bit addresses (e.g. AT25040A EEPROM) + * use bit 3 of the command byte as address bit A8, rather + * than having a two-byte address. If this flag is set, then + * commands should be munged in this way. + * @block_size: Write block size (in bytes). + * Write commands are limited to blocks with this size and alignment. + * @read: Read function for the device + * @write: Write function for the device */ - -/* Write status register */ -#define SPI_WRSR 0x01 - -/* Write data to memory array */ -#define SPI_WRITE 0x02 - -/* Read data from memory array */ -#define SPI_READ 0x03 - -/* Reset write enable latch */ -#define SPI_WRDI 0x04 - -/* Read status register */ -#define SPI_RDSR 0x05 - -/* Set write enable latch */ -#define SPI_WREN 0x06 - -/* SST: Enable write to status register */ -#define SPI_SST_EWSR 0x50 - -/* - * Status register bits. Not all bits are supported on all devices. - * - */ - -/* Write-protect pin enabled */ -#define SPI_STATUS_WPEN 0x80 - -/* Block protection bit 2 */ -#define SPI_STATUS_BP2 0x10 - -/* Block protection bit 1 */ -#define SPI_STATUS_BP1 0x08 - -/* Block protection bit 0 */ -#define SPI_STATUS_BP0 0x04 - -/* State of the write enable latch */ -#define SPI_STATUS_WEN 0x02 - -/* Device busy flag */ -#define SPI_STATUS_NRDY 0x01 +struct efx_spi_device { + struct efx_nic *efx; + int device_id; + unsigned int size; + unsigned int addr_len; + unsigned int munge_address:1; + unsigned int block_size; +}; + +int falcon_spi_read(const struct efx_spi_device *spi, loff_t start, + size_t len, size_t *retlen, u8 *buffer); +int falcon_spi_write(const struct efx_spi_device *spi, loff_t start, + size_t len, size_t *retlen, const u8 *buffer); #endif /* EFX_SPI_H */ diff --git a/drivers/net/sfc/tenxpress.c b/drivers/net/sfc/tenxpress.c index c0146061c32..8412dbe1e8f 100644 --- a/drivers/net/sfc/tenxpress.c +++ b/drivers/net/sfc/tenxpress.c @@ -65,25 +65,10 @@ #define PMA_PMD_LED_DEFAULT (PMA_PMD_LED_OFF << PMA_PMD_LED_RX_LBN) -/* Self test (BIST) control register */ -#define PMA_PMD_BIST_CTRL_REG (0xc014) -#define PMA_PMD_BIST_BER_LBN (2) /* Run BER test */ -#define PMA_PMD_BIST_CONT_LBN (1) /* Run continuous BIST until cleared */ -#define PMA_PMD_BIST_SINGLE_LBN (0) /* Run 1 BIST iteration (self clears) */ -/* Self test status register */ -#define PMA_PMD_BIST_STAT_REG (0xc015) -#define PMA_PMD_BIST_ENX_LBN (3) -#define PMA_PMD_BIST_PMA_LBN (2) -#define PMA_PMD_BIST_RXD_LBN (1) -#define PMA_PMD_BIST_AFE_LBN (0) - /* Special Software reset register */ #define PMA_PMD_EXT_CTRL_REG 49152 #define PMA_PMD_EXT_SSR_LBN 15 -#define BIST_MAX_DELAY (1000) -#define BIST_POLL_DELAY (10) - /* Misc register defines */ #define PCS_CLOCK_CTRL_REG 0xd801 #define PLL312_RST_N_LBN 2 @@ -119,27 +104,12 @@ MODULE_PARM_DESC(crc_error_reset_threshold, "Max number of CRC errors before XAUI reset"); struct tenxpress_phy_data { - enum tenxpress_state state; enum efx_loopback_mode loopback_mode; atomic_t bad_crc_count; - int tx_disabled; + enum efx_phy_mode phy_mode; int bad_lp_tries; }; -static int tenxpress_state_is(struct efx_nic *efx, int state) -{ - struct tenxpress_phy_data *phy_data = efx->phy_data; - return (phy_data != NULL) && (state == phy_data->state); -} - -void tenxpress_set_state(struct efx_nic *efx, - enum tenxpress_state state) -{ - struct tenxpress_phy_data *phy_data = efx->phy_data; - if (phy_data != NULL) - phy_data->state = state; -} - void tenxpress_crc_err(struct efx_nic *efx) { struct tenxpress_phy_data *phy_data = efx->phy_data; @@ -214,15 +184,12 @@ static int tenxpress_phy_init(struct efx_nic *efx) if (!phy_data) return -ENOMEM; efx->phy_data = phy_data; + phy_data->phy_mode = efx->phy_mode; - tenxpress_set_state(efx, TENXPRESS_STATUS_NORMAL); - - if (!sfe4001_phy_flash_cfg) { - rc = mdio_clause45_wait_reset_mmds(efx, - TENXPRESS_REQUIRED_DEVS); - if (rc < 0) - goto fail; - } + rc = mdio_clause45_wait_reset_mmds(efx, + TENXPRESS_REQUIRED_DEVS); + if (rc < 0) + goto fail; rc = mdio_clause45_check_mmds(efx, TENXPRESS_REQUIRED_DEVS, 0); if (rc < 0) @@ -274,7 +241,7 @@ static int tenxpress_special_reset(struct efx_nic *efx) return 0; } -static void tenxpress_set_bad_lp(struct efx_nic *efx, int bad_lp) +static void tenxpress_set_bad_lp(struct efx_nic *efx, bool bad_lp) { struct tenxpress_phy_data *pd = efx->phy_data; int reg; @@ -311,15 +278,15 @@ static void tenxpress_set_bad_lp(struct efx_nic *efx, int bad_lp) * into a non-10GBT port and if so warn the user that they won't get * link any time soon as we are 10GBT only, unless caller specified * not to do this check (it isn't useful in loopback) */ -static int tenxpress_link_ok(struct efx_nic *efx, int check_lp) +static bool tenxpress_link_ok(struct efx_nic *efx, bool check_lp) { - int ok = mdio_clause45_links_ok(efx, TENXPRESS_REQUIRED_DEVS); + bool ok = mdio_clause45_links_ok(efx, TENXPRESS_REQUIRED_DEVS); if (ok) { - tenxpress_set_bad_lp(efx, 0); + tenxpress_set_bad_lp(efx, false); } else if (check_lp) { /* Are we plugged into the wrong sort of link? */ - int bad_lp = 0; + bool bad_lp = false; int phy_id = efx->mii.phy_id; int an_stat = mdio_clause45_read(efx, phy_id, MDIO_MMD_AN, MDIO_AN_STATUS); @@ -332,7 +299,7 @@ static int tenxpress_link_ok(struct efx_nic *efx, int check_lp) * bit has the advantage of not clearing when autoneg * restarts. */ if (!(xphy_stat & (1 << PMA_PMD_XSTAT_FLP_LBN))) { - tenxpress_set_bad_lp(efx, 0); + tenxpress_set_bad_lp(efx, false); return ok; } @@ -367,16 +334,19 @@ static void tenxpress_phyxs_loopback(struct efx_nic *efx) static void tenxpress_phy_reconfigure(struct efx_nic *efx) { struct tenxpress_phy_data *phy_data = efx->phy_data; - int loop_change = LOOPBACK_OUT_OF(phy_data, efx, - TENXPRESS_LOOPBACKS); + bool loop_change = LOOPBACK_OUT_OF(phy_data, efx, + TENXPRESS_LOOPBACKS); - if (!tenxpress_state_is(efx, TENXPRESS_STATUS_NORMAL)) + if (efx->phy_mode & PHY_MODE_SPECIAL) { + phy_data->phy_mode = efx->phy_mode; return; + } /* When coming out of transmit disable, coming out of low power * mode, or moving out of any PHY internal loopback mode, * perform a special software reset */ - if ((phy_data->tx_disabled && !efx->tx_disabled) || + if ((efx->phy_mode == PHY_MODE_NORMAL && + phy_data->phy_mode != PHY_MODE_NORMAL) || loop_change) { tenxpress_special_reset(efx); falcon_reset_xaui(efx); @@ -386,9 +356,9 @@ static void tenxpress_phy_reconfigure(struct efx_nic *efx) mdio_clause45_phy_reconfigure(efx); tenxpress_phyxs_loopback(efx); - phy_data->tx_disabled = efx->tx_disabled; phy_data->loopback_mode = efx->loopback_mode; - efx->link_up = tenxpress_link_ok(efx, 0); + phy_data->phy_mode = efx->phy_mode; + efx->link_up = tenxpress_link_ok(efx, false); efx->link_options = GM_LPA_10000FULL; } @@ -402,16 +372,15 @@ static void tenxpress_phy_clear_interrupt(struct efx_nic *efx) static int tenxpress_phy_check_hw(struct efx_nic *efx) { struct tenxpress_phy_data *phy_data = efx->phy_data; - int phy_up = tenxpress_state_is(efx, TENXPRESS_STATUS_NORMAL); - int link_ok; + bool link_ok; - link_ok = phy_up && tenxpress_link_ok(efx, 1); + link_ok = (phy_data->phy_mode == PHY_MODE_NORMAL && + tenxpress_link_ok(efx, true)); if (link_ok != efx->link_up) falcon_xmac_sim_phy_event(efx); - /* Nothing to check if we've already shut down the PHY */ - if (!phy_up) + if (phy_data->phy_mode != PHY_MODE_NORMAL) return 0; if (atomic_read(&phy_data->bad_crc_count) > crc_error_reset_threshold) { @@ -444,7 +413,7 @@ static void tenxpress_phy_fini(struct efx_nic *efx) /* Set the RX and TX LEDs and Link LED flashing. The other LEDs * (which probably aren't wired anyway) are left in AUTO mode */ -void tenxpress_phy_blink(struct efx_nic *efx, int blink) +void tenxpress_phy_blink(struct efx_nic *efx, bool blink) { int reg; @@ -507,6 +476,12 @@ static void tenxpress_reset_xaui(struct efx_nic *efx) udelay(10); } +static int tenxpress_phy_test(struct efx_nic *efx) +{ + /* BIST is automatically run after a special software reset */ + return tenxpress_special_reset(efx); +} + struct efx_phy_operations falcon_tenxpress_phy_ops = { .init = tenxpress_phy_init, .reconfigure = tenxpress_phy_reconfigure, @@ -514,6 +489,7 @@ struct efx_phy_operations falcon_tenxpress_phy_ops = { .fini = tenxpress_phy_fini, .clear_interrupt = tenxpress_phy_clear_interrupt, .reset_xaui = tenxpress_reset_xaui, + .test = tenxpress_phy_test, .mmds = TENXPRESS_REQUIRED_DEVS, .loopbacks = TENXPRESS_LOOPBACKS, }; diff --git a/drivers/net/sfc/tx.c b/drivers/net/sfc/tx.c index 5e8374ab28e..cdee7c200d6 100644 --- a/drivers/net/sfc/tx.c +++ b/drivers/net/sfc/tx.c @@ -47,7 +47,7 @@ void efx_stop_queue(struct efx_nic *efx) * We want to be able to nest calls to netif_stop_queue(), since each * channel can have an individual stop on the queue. */ -inline void efx_wake_queue(struct efx_nic *efx) +void efx_wake_queue(struct efx_nic *efx) { local_bh_disable(); if (atomic_dec_and_lock(&efx->netif_stop_count, @@ -59,19 +59,21 @@ inline void efx_wake_queue(struct efx_nic *efx) local_bh_enable(); } -static inline void efx_dequeue_buffer(struct efx_tx_queue *tx_queue, - struct efx_tx_buffer *buffer) +static void efx_dequeue_buffer(struct efx_tx_queue *tx_queue, + struct efx_tx_buffer *buffer) { if (buffer->unmap_len) { struct pci_dev *pci_dev = tx_queue->efx->pci_dev; + dma_addr_t unmap_addr = (buffer->dma_addr + buffer->len - + buffer->unmap_len); if (buffer->unmap_single) - pci_unmap_single(pci_dev, buffer->unmap_addr, - buffer->unmap_len, PCI_DMA_TODEVICE); + pci_unmap_single(pci_dev, unmap_addr, buffer->unmap_len, + PCI_DMA_TODEVICE); else - pci_unmap_page(pci_dev, buffer->unmap_addr, - buffer->unmap_len, PCI_DMA_TODEVICE); + pci_unmap_page(pci_dev, unmap_addr, buffer->unmap_len, + PCI_DMA_TODEVICE); buffer->unmap_len = 0; - buffer->unmap_single = 0; + buffer->unmap_single = false; } if (buffer->skb) { @@ -103,13 +105,13 @@ struct efx_tso_header { }; static int efx_enqueue_skb_tso(struct efx_tx_queue *tx_queue, - const struct sk_buff *skb); + struct sk_buff *skb); static void efx_fini_tso(struct efx_tx_queue *tx_queue); static void efx_tsoh_heap_free(struct efx_tx_queue *tx_queue, struct efx_tso_header *tsoh); -static inline void efx_tsoh_free(struct efx_tx_queue *tx_queue, - struct efx_tx_buffer *buffer) +static void efx_tsoh_free(struct efx_tx_queue *tx_queue, + struct efx_tx_buffer *buffer) { if (buffer->tsoh) { if (likely(!buffer->tsoh->unmap_len)) { @@ -136,8 +138,8 @@ static inline void efx_tsoh_free(struct efx_tx_queue *tx_queue, * Returns NETDEV_TX_OK or NETDEV_TX_BUSY * You must hold netif_tx_lock() to call this function. */ -static inline int efx_enqueue_skb(struct efx_tx_queue *tx_queue, - const struct sk_buff *skb) +static int efx_enqueue_skb(struct efx_tx_queue *tx_queue, + struct sk_buff *skb) { struct efx_nic *efx = tx_queue->efx; struct pci_dev *pci_dev = efx->pci_dev; @@ -148,7 +150,7 @@ static inline int efx_enqueue_skb(struct efx_tx_queue *tx_queue, unsigned int len, unmap_len = 0, fill_level, insert_ptr, misalign; dma_addr_t dma_addr, unmap_addr = 0; unsigned int dma_len; - unsigned unmap_single; + bool unmap_single; int q_space, i = 0; int rc = NETDEV_TX_OK; @@ -167,7 +169,7 @@ static inline int efx_enqueue_skb(struct efx_tx_queue *tx_queue, * since this is more efficient on machines with sparse * memory. */ - unmap_single = 1; + unmap_single = true; dma_addr = pci_map_single(pci_dev, skb->data, len, PCI_DMA_TODEVICE); /* Process all fragments */ @@ -213,7 +215,7 @@ static inline int efx_enqueue_skb(struct efx_tx_queue *tx_queue, EFX_BUG_ON_PARANOID(buffer->tsoh); EFX_BUG_ON_PARANOID(buffer->skb); EFX_BUG_ON_PARANOID(buffer->len); - EFX_BUG_ON_PARANOID(buffer->continuation != 1); + EFX_BUG_ON_PARANOID(!buffer->continuation); EFX_BUG_ON_PARANOID(buffer->unmap_len); dma_len = (((~dma_addr) & efx->type->tx_dma_mask) + 1); @@ -233,7 +235,6 @@ static inline int efx_enqueue_skb(struct efx_tx_queue *tx_queue, } while (len); /* Transfer ownership of the unmapping to the final buffer */ - buffer->unmap_addr = unmap_addr; buffer->unmap_single = unmap_single; buffer->unmap_len = unmap_len; unmap_len = 0; @@ -247,14 +248,14 @@ static inline int efx_enqueue_skb(struct efx_tx_queue *tx_queue, page_offset = fragment->page_offset; i++; /* Map for DMA */ - unmap_single = 0; + unmap_single = false; dma_addr = pci_map_page(pci_dev, page, page_offset, len, PCI_DMA_TODEVICE); } /* Transfer ownership of the skb to the final buffer */ buffer->skb = skb; - buffer->continuation = 0; + buffer->continuation = false; /* Pass off to hardware */ falcon_push_buffers(tx_queue); @@ -287,9 +288,14 @@ static inline int efx_enqueue_skb(struct efx_tx_queue *tx_queue, } /* Free the fragment we were mid-way through pushing */ - if (unmap_len) - pci_unmap_page(pci_dev, unmap_addr, unmap_len, - PCI_DMA_TODEVICE); + if (unmap_len) { + if (unmap_single) + pci_unmap_single(pci_dev, unmap_addr, unmap_len, + PCI_DMA_TODEVICE); + else + pci_unmap_page(pci_dev, unmap_addr, unmap_len, + PCI_DMA_TODEVICE); + } return rc; } @@ -299,8 +305,8 @@ static inline int efx_enqueue_skb(struct efx_tx_queue *tx_queue, * This removes packets from the TX queue, up to and including the * specified index. */ -static inline void efx_dequeue_buffers(struct efx_tx_queue *tx_queue, - unsigned int index) +static void efx_dequeue_buffers(struct efx_tx_queue *tx_queue, + unsigned int index) { struct efx_nic *efx = tx_queue->efx; unsigned int stop_index, read_ptr; @@ -320,7 +326,7 @@ static inline void efx_dequeue_buffers(struct efx_tx_queue *tx_queue, } efx_dequeue_buffer(tx_queue, buffer); - buffer->continuation = 1; + buffer->continuation = true; buffer->len = 0; ++tx_queue->read_count; @@ -367,8 +373,15 @@ inline int efx_xmit(struct efx_nic *efx, */ int efx_hard_start_xmit(struct sk_buff *skb, struct net_device *net_dev) { - struct efx_nic *efx = net_dev->priv; - return efx_xmit(efx, &efx->tx_queue[0], skb); + struct efx_nic *efx = netdev_priv(net_dev); + struct efx_tx_queue *tx_queue; + + if (likely(skb->ip_summed == CHECKSUM_PARTIAL)) + tx_queue = &efx->tx_queue[EFX_TX_QUEUE_OFFLOAD_CSUM]; + else + tx_queue = &efx->tx_queue[EFX_TX_QUEUE_NO_CSUM]; + + return efx_xmit(efx, tx_queue, skb); } void efx_xmit_done(struct efx_tx_queue *tx_queue, unsigned int index) @@ -412,30 +425,25 @@ int efx_probe_tx_queue(struct efx_tx_queue *tx_queue) /* Allocate software ring */ txq_size = (efx->type->txd_ring_mask + 1) * sizeof(*tx_queue->buffer); tx_queue->buffer = kzalloc(txq_size, GFP_KERNEL); - if (!tx_queue->buffer) { - rc = -ENOMEM; - goto fail1; - } + if (!tx_queue->buffer) + return -ENOMEM; for (i = 0; i <= efx->type->txd_ring_mask; ++i) - tx_queue->buffer[i].continuation = 1; + tx_queue->buffer[i].continuation = true; /* Allocate hardware ring */ rc = falcon_probe_tx(tx_queue); if (rc) - goto fail2; + goto fail; return 0; - fail2: + fail: kfree(tx_queue->buffer); tx_queue->buffer = NULL; - fail1: - tx_queue->used = 0; - return rc; } -int efx_init_tx_queue(struct efx_tx_queue *tx_queue) +void efx_init_tx_queue(struct efx_tx_queue *tx_queue) { EFX_LOG(tx_queue->efx, "initialising TX queue %d\n", tx_queue->queue); @@ -446,7 +454,7 @@ int efx_init_tx_queue(struct efx_tx_queue *tx_queue) BUG_ON(tx_queue->stopped); /* Set up TX descriptor ring */ - return falcon_init_tx(tx_queue); + falcon_init_tx(tx_queue); } void efx_release_tx_buffers(struct efx_tx_queue *tx_queue) @@ -461,7 +469,7 @@ void efx_release_tx_buffers(struct efx_tx_queue *tx_queue) buffer = &tx_queue->buffer[tx_queue->read_count & tx_queue->efx->type->txd_ring_mask]; efx_dequeue_buffer(tx_queue, buffer); - buffer->continuation = 1; + buffer->continuation = true; buffer->len = 0; ++tx_queue->read_count; @@ -494,7 +502,6 @@ void efx_remove_tx_queue(struct efx_tx_queue *tx_queue) kfree(tx_queue->buffer); tx_queue->buffer = NULL; - tx_queue->used = 0; } @@ -533,47 +540,37 @@ void efx_remove_tx_queue(struct efx_tx_queue *tx_queue) /** * struct tso_state - TSO state for an SKB - * @remaining_len: Bytes of data we've yet to segment + * @out_len: Remaining length in current segment * @seqnum: Current sequence number + * @ipv4_id: Current IPv4 ID, host endian * @packet_space: Remaining space in current packet - * @ifc: Input fragment cursor. - * Where we are in the current fragment of the incoming SKB. These - * values get updated in place when we split a fragment over - * multiple packets. - * @p: Parameters. - * These values are set once at the start of the TSO send and do - * not get changed as the routine progresses. + * @dma_addr: DMA address of current position + * @in_len: Remaining length in current SKB fragment + * @unmap_len: Length of SKB fragment + * @unmap_addr: DMA address of SKB fragment + * @unmap_single: DMA single vs page mapping flag + * @header_len: Number of bytes of header + * @full_packet_size: Number of bytes to put in each outgoing segment * * The state used during segmentation. It is put into this data structure * just to make it easy to pass into inline functions. */ struct tso_state { - unsigned remaining_len; + /* Output position */ + unsigned out_len; unsigned seqnum; + unsigned ipv4_id; unsigned packet_space; - struct { - /* DMA address of current position */ - dma_addr_t dma_addr; - /* Remaining length */ - unsigned int len; - /* DMA address and length of the whole fragment */ - unsigned int unmap_len; - dma_addr_t unmap_addr; - struct page *page; - unsigned page_off; - } ifc; - - struct { - /* The number of bytes of header */ - unsigned int header_length; - - /* The number of bytes to put in each outgoing segment. */ - int full_packet_size; - - /* Current IPv4 ID, host endian. */ - unsigned ipv4_id; - } p; + /* Input position */ + dma_addr_t dma_addr; + unsigned in_len; + unsigned unmap_len; + dma_addr_t unmap_addr; + bool unmap_single; + + unsigned header_len; + int full_packet_size; }; @@ -581,11 +578,24 @@ struct tso_state { * Verify that our various assumptions about sk_buffs and the conditions * under which TSO will be attempted hold true. */ -static inline void efx_tso_check_safe(const struct sk_buff *skb) +static void efx_tso_check_safe(struct sk_buff *skb) { - EFX_BUG_ON_PARANOID(skb->protocol != htons(ETH_P_IP)); + __be16 protocol = skb->protocol; + EFX_BUG_ON_PARANOID(((struct ethhdr *)skb->data)->h_proto != - skb->protocol); + protocol); + if (protocol == htons(ETH_P_8021Q)) { + /* Find the encapsulated protocol; reset network header + * and transport header based on that. */ + struct vlan_ethhdr *veh = (struct vlan_ethhdr *)skb->data; + protocol = veh->h_vlan_encapsulated_proto; + skb_set_network_header(skb, sizeof(*veh)); + if (protocol == htons(ETH_P_IP)) + skb_set_transport_header(skb, sizeof(*veh) + + 4 * ip_hdr(skb)->ihl); + } + + EFX_BUG_ON_PARANOID(protocol != htons(ETH_P_IP)); EFX_BUG_ON_PARANOID(ip_hdr(skb)->protocol != IPPROTO_TCP); EFX_BUG_ON_PARANOID((PTR_DIFF(tcp_hdr(skb), skb->data) + (tcp_hdr(skb)->doff << 2u)) > @@ -685,18 +695,14 @@ efx_tsoh_heap_free(struct efx_tx_queue *tx_queue, struct efx_tso_header *tsoh) * @tx_queue: Efx TX queue * @dma_addr: DMA address of fragment * @len: Length of fragment - * @skb: Only non-null for end of last segment - * @end_of_packet: True if last fragment in a packet - * @unmap_addr: DMA address of fragment for unmapping - * @unmap_len: Only set this in last segment of a fragment + * @final_buffer: The final buffer inserted into the queue * * Push descriptors onto the TX queue. Return 0 on success or 1 if * @tx_queue full. */ static int efx_tx_queue_insert(struct efx_tx_queue *tx_queue, dma_addr_t dma_addr, unsigned len, - const struct sk_buff *skb, int end_of_packet, - dma_addr_t unmap_addr, unsigned unmap_len) + struct efx_tx_buffer **final_buffer) { struct efx_tx_buffer *buffer; struct efx_nic *efx = tx_queue->efx; @@ -724,8 +730,10 @@ static int efx_tx_queue_insert(struct efx_tx_queue *tx_queue, fill_level = (tx_queue->insert_count - tx_queue->old_read_count); q_space = efx->type->txd_ring_mask - 1 - fill_level; - if (unlikely(q_space-- <= 0)) + if (unlikely(q_space-- <= 0)) { + *final_buffer = NULL; return 1; + } smp_mb(); --tx_queue->stopped; } @@ -742,7 +750,7 @@ static int efx_tx_queue_insert(struct efx_tx_queue *tx_queue, EFX_BUG_ON_PARANOID(buffer->len); EFX_BUG_ON_PARANOID(buffer->unmap_len); EFX_BUG_ON_PARANOID(buffer->skb); - EFX_BUG_ON_PARANOID(buffer->continuation != 1); + EFX_BUG_ON_PARANOID(!buffer->continuation); EFX_BUG_ON_PARANOID(buffer->tsoh); buffer->dma_addr = dma_addr; @@ -765,10 +773,7 @@ static int efx_tx_queue_insert(struct efx_tx_queue *tx_queue, EFX_BUG_ON_PARANOID(!len); buffer->len = len; - buffer->skb = skb; - buffer->continuation = !end_of_packet; - buffer->unmap_addr = unmap_addr; - buffer->unmap_len = unmap_len; + *final_buffer = buffer; return 0; } @@ -780,8 +785,8 @@ static int efx_tx_queue_insert(struct efx_tx_queue *tx_queue, * a single fragment, and we know it doesn't cross a page boundary. It * also allows us to not worry about end-of-packet etc. */ -static inline void efx_tso_put_header(struct efx_tx_queue *tx_queue, - struct efx_tso_header *tsoh, unsigned len) +static void efx_tso_put_header(struct efx_tx_queue *tx_queue, + struct efx_tso_header *tsoh, unsigned len) { struct efx_tx_buffer *buffer; @@ -791,7 +796,7 @@ static inline void efx_tso_put_header(struct efx_tx_queue *tx_queue, EFX_BUG_ON_PARANOID(buffer->len); EFX_BUG_ON_PARANOID(buffer->unmap_len); EFX_BUG_ON_PARANOID(buffer->skb); - EFX_BUG_ON_PARANOID(buffer->continuation != 1); + EFX_BUG_ON_PARANOID(!buffer->continuation); EFX_BUG_ON_PARANOID(buffer->tsoh); buffer->len = len; buffer->dma_addr = tsoh->dma_addr; @@ -805,6 +810,7 @@ static inline void efx_tso_put_header(struct efx_tx_queue *tx_queue, static void efx_enqueue_unwind(struct efx_tx_queue *tx_queue) { struct efx_tx_buffer *buffer; + dma_addr_t unmap_addr; /* Work backwards until we hit the original insert pointer value */ while (tx_queue->insert_count != tx_queue->write_count) { @@ -814,11 +820,18 @@ static void efx_enqueue_unwind(struct efx_tx_queue *tx_queue) efx_tsoh_free(tx_queue, buffer); EFX_BUG_ON_PARANOID(buffer->skb); buffer->len = 0; - buffer->continuation = 1; + buffer->continuation = true; if (buffer->unmap_len) { - pci_unmap_page(tx_queue->efx->pci_dev, - buffer->unmap_addr, - buffer->unmap_len, PCI_DMA_TODEVICE); + unmap_addr = (buffer->dma_addr + buffer->len - + buffer->unmap_len); + if (buffer->unmap_single) + pci_unmap_single(tx_queue->efx->pci_dev, + unmap_addr, buffer->unmap_len, + PCI_DMA_TODEVICE); + else + pci_unmap_page(tx_queue->efx->pci_dev, + unmap_addr, buffer->unmap_len, + PCI_DMA_TODEVICE); buffer->unmap_len = 0; } } @@ -826,50 +839,57 @@ static void efx_enqueue_unwind(struct efx_tx_queue *tx_queue) /* Parse the SKB header and initialise state. */ -static inline void tso_start(struct tso_state *st, const struct sk_buff *skb) +static void tso_start(struct tso_state *st, const struct sk_buff *skb) { /* All ethernet/IP/TCP headers combined size is TCP header size * plus offset of TCP header relative to start of packet. */ - st->p.header_length = ((tcp_hdr(skb)->doff << 2u) - + PTR_DIFF(tcp_hdr(skb), skb->data)); - st->p.full_packet_size = (st->p.header_length - + skb_shinfo(skb)->gso_size); + st->header_len = ((tcp_hdr(skb)->doff << 2u) + + PTR_DIFF(tcp_hdr(skb), skb->data)); + st->full_packet_size = st->header_len + skb_shinfo(skb)->gso_size; - st->p.ipv4_id = ntohs(ip_hdr(skb)->id); + st->ipv4_id = ntohs(ip_hdr(skb)->id); st->seqnum = ntohl(tcp_hdr(skb)->seq); EFX_BUG_ON_PARANOID(tcp_hdr(skb)->urg); EFX_BUG_ON_PARANOID(tcp_hdr(skb)->syn); EFX_BUG_ON_PARANOID(tcp_hdr(skb)->rst); - st->packet_space = st->p.full_packet_size; - st->remaining_len = skb->len - st->p.header_length; + st->packet_space = st->full_packet_size; + st->out_len = skb->len - st->header_len; + st->unmap_len = 0; + st->unmap_single = false; } - -/** - * tso_get_fragment - record fragment details and map for DMA - * @st: TSO state - * @efx: Efx NIC - * @data: Pointer to fragment data - * @len: Length of fragment - * - * Record fragment details and map for DMA. Return 0 on success, or - * -%ENOMEM if DMA mapping fails. - */ -static inline int tso_get_fragment(struct tso_state *st, struct efx_nic *efx, - int len, struct page *page, int page_off) +static int tso_get_fragment(struct tso_state *st, struct efx_nic *efx, + skb_frag_t *frag) { + st->unmap_addr = pci_map_page(efx->pci_dev, frag->page, + frag->page_offset, frag->size, + PCI_DMA_TODEVICE); + if (likely(!pci_dma_mapping_error(efx->pci_dev, st->unmap_addr))) { + st->unmap_single = false; + st->unmap_len = frag->size; + st->in_len = frag->size; + st->dma_addr = st->unmap_addr; + return 0; + } + return -ENOMEM; +} - st->ifc.unmap_addr = pci_map_page(efx->pci_dev, page, page_off, - len, PCI_DMA_TODEVICE); - if (likely(!pci_dma_mapping_error(efx->pci_dev, st->ifc.unmap_addr))) { - st->ifc.unmap_len = len; - st->ifc.len = len; - st->ifc.dma_addr = st->ifc.unmap_addr; - st->ifc.page = page; - st->ifc.page_off = page_off; +static int tso_get_head_fragment(struct tso_state *st, struct efx_nic *efx, + const struct sk_buff *skb) +{ + int hl = st->header_len; + int len = skb_headlen(skb) - hl; + + st->unmap_addr = pci_map_single(efx->pci_dev, skb->data + hl, + len, PCI_DMA_TODEVICE); + if (likely(!pci_dma_mapping_error(efx->pci_dev, st->unmap_addr))) { + st->unmap_single = true; + st->unmap_len = len; + st->in_len = len; + st->dma_addr = st->unmap_addr; return 0; } return -ENOMEM; @@ -886,36 +906,45 @@ static inline int tso_get_fragment(struct tso_state *st, struct efx_nic *efx, * of fragment or end-of-packet. Return 0 on success, 1 if not enough * space in @tx_queue. */ -static inline int tso_fill_packet_with_fragment(struct efx_tx_queue *tx_queue, - const struct sk_buff *skb, - struct tso_state *st) +static int tso_fill_packet_with_fragment(struct efx_tx_queue *tx_queue, + const struct sk_buff *skb, + struct tso_state *st) { - + struct efx_tx_buffer *buffer; int n, end_of_packet, rc; - if (st->ifc.len == 0) + if (st->in_len == 0) return 0; if (st->packet_space == 0) return 0; - EFX_BUG_ON_PARANOID(st->ifc.len <= 0); + EFX_BUG_ON_PARANOID(st->in_len <= 0); EFX_BUG_ON_PARANOID(st->packet_space <= 0); - n = min(st->ifc.len, st->packet_space); + n = min(st->in_len, st->packet_space); st->packet_space -= n; - st->remaining_len -= n; - st->ifc.len -= n; - st->ifc.page_off += n; - end_of_packet = st->remaining_len == 0 || st->packet_space == 0; - - rc = efx_tx_queue_insert(tx_queue, st->ifc.dma_addr, n, - st->remaining_len ? NULL : skb, - end_of_packet, st->ifc.unmap_addr, - st->ifc.len ? 0 : st->ifc.unmap_len); - - st->ifc.dma_addr += n; + st->out_len -= n; + st->in_len -= n; + + rc = efx_tx_queue_insert(tx_queue, st->dma_addr, n, &buffer); + if (likely(rc == 0)) { + if (st->out_len == 0) + /* Transfer ownership of the skb */ + buffer->skb = skb; + + end_of_packet = st->out_len == 0 || st->packet_space == 0; + buffer->continuation = !end_of_packet; + + if (st->in_len == 0) { + /* Transfer ownership of the pci mapping */ + buffer->unmap_len = st->unmap_len; + buffer->unmap_single = st->unmap_single; + st->unmap_len = 0; + } + } + st->dma_addr += n; return rc; } @@ -929,9 +958,9 @@ static inline int tso_fill_packet_with_fragment(struct efx_tx_queue *tx_queue, * Generate a new header and prepare for the new packet. Return 0 on * success, or -1 if failed to alloc header. */ -static inline int tso_start_new_packet(struct efx_tx_queue *tx_queue, - const struct sk_buff *skb, - struct tso_state *st) +static int tso_start_new_packet(struct efx_tx_queue *tx_queue, + const struct sk_buff *skb, + struct tso_state *st) { struct efx_tso_header *tsoh; struct iphdr *tsoh_iph; @@ -940,7 +969,7 @@ static inline int tso_start_new_packet(struct efx_tx_queue *tx_queue, u8 *header; /* Allocate a DMA-mapped header buffer. */ - if (likely(TSOH_SIZE(st->p.header_length) <= TSOH_STD_SIZE)) { + if (likely(TSOH_SIZE(st->header_len) <= TSOH_STD_SIZE)) { if (tx_queue->tso_headers_free == NULL) { if (efx_tsoh_block_alloc(tx_queue)) return -1; @@ -951,7 +980,7 @@ static inline int tso_start_new_packet(struct efx_tx_queue *tx_queue, tsoh->unmap_len = 0; } else { tx_queue->tso_long_headers++; - tsoh = efx_tsoh_heap_alloc(tx_queue, st->p.header_length); + tsoh = efx_tsoh_heap_alloc(tx_queue, st->header_len); if (unlikely(!tsoh)) return -1; } @@ -961,33 +990,32 @@ static inline int tso_start_new_packet(struct efx_tx_queue *tx_queue, tsoh_iph = (struct iphdr *)(header + SKB_IPV4_OFF(skb)); /* Copy and update the headers. */ - memcpy(header, skb->data, st->p.header_length); + memcpy(header, skb->data, st->header_len); tsoh_th->seq = htonl(st->seqnum); st->seqnum += skb_shinfo(skb)->gso_size; - if (st->remaining_len > skb_shinfo(skb)->gso_size) { + if (st->out_len > skb_shinfo(skb)->gso_size) { /* This packet will not finish the TSO burst. */ - ip_length = st->p.full_packet_size - ETH_HDR_LEN(skb); + ip_length = st->full_packet_size - ETH_HDR_LEN(skb); tsoh_th->fin = 0; tsoh_th->psh = 0; } else { /* This packet will be the last in the TSO burst. */ - ip_length = (st->p.header_length - ETH_HDR_LEN(skb) - + st->remaining_len); + ip_length = st->header_len - ETH_HDR_LEN(skb) + st->out_len; tsoh_th->fin = tcp_hdr(skb)->fin; tsoh_th->psh = tcp_hdr(skb)->psh; } tsoh_iph->tot_len = htons(ip_length); /* Linux leaves suitable gaps in the IP ID space for us to fill. */ - tsoh_iph->id = htons(st->p.ipv4_id); - st->p.ipv4_id++; + tsoh_iph->id = htons(st->ipv4_id); + st->ipv4_id++; st->packet_space = skb_shinfo(skb)->gso_size; ++tx_queue->tso_packets; /* Form a descriptor for this header. */ - efx_tso_put_header(tx_queue, tsoh, st->p.header_length); + efx_tso_put_header(tx_queue, tsoh, st->header_len); return 0; } @@ -1005,11 +1033,11 @@ static inline int tso_start_new_packet(struct efx_tx_queue *tx_queue, * %NETDEV_TX_OK or %NETDEV_TX_BUSY. */ static int efx_enqueue_skb_tso(struct efx_tx_queue *tx_queue, - const struct sk_buff *skb) + struct sk_buff *skb) { + struct efx_nic *efx = tx_queue->efx; int frag_i, rc, rc2 = NETDEV_TX_OK; struct tso_state state; - skb_frag_t *f; /* Verify TSO is safe - these checks should never fail. */ efx_tso_check_safe(skb); @@ -1021,29 +1049,16 @@ static int efx_enqueue_skb_tso(struct efx_tx_queue *tx_queue, /* Assume that skb header area contains exactly the headers, and * all payload is in the frag list. */ - if (skb_headlen(skb) == state.p.header_length) { + if (skb_headlen(skb) == state.header_len) { /* Grab the first payload fragment. */ EFX_BUG_ON_PARANOID(skb_shinfo(skb)->nr_frags < 1); frag_i = 0; - f = &skb_shinfo(skb)->frags[frag_i]; - rc = tso_get_fragment(&state, tx_queue->efx, - f->size, f->page, f->page_offset); + rc = tso_get_fragment(&state, efx, + skb_shinfo(skb)->frags + frag_i); if (rc) goto mem_err; } else { - /* It may look like this code fragment assumes that the - * skb->data portion does not cross a page boundary, but - * that is not the case. It is guaranteed to be direct - * mapped memory, and therefore is physically contiguous, - * and so DMA will work fine. kmap_atomic() on this region - * will just return the direct mapping, so that will work - * too. - */ - int page_off = (unsigned long)skb->data & (PAGE_SIZE - 1); - int hl = state.p.header_length; - rc = tso_get_fragment(&state, tx_queue->efx, - skb_headlen(skb) - hl, - virt_to_page(skb->data), page_off + hl); + rc = tso_get_head_fragment(&state, efx, skb); if (rc) goto mem_err; frag_i = -1; @@ -1058,13 +1073,12 @@ static int efx_enqueue_skb_tso(struct efx_tx_queue *tx_queue, goto stop; /* Move onto the next fragment? */ - if (state.ifc.len == 0) { + if (state.in_len == 0) { if (++frag_i >= skb_shinfo(skb)->nr_frags) /* End of payload reached. */ break; - f = &skb_shinfo(skb)->frags[frag_i]; - rc = tso_get_fragment(&state, tx_queue->efx, - f->size, f->page, f->page_offset); + rc = tso_get_fragment(&state, efx, + skb_shinfo(skb)->frags + frag_i); if (rc) goto mem_err; } @@ -1082,8 +1096,7 @@ static int efx_enqueue_skb_tso(struct efx_tx_queue *tx_queue, return NETDEV_TX_OK; mem_err: - EFX_ERR(tx_queue->efx, "Out of memory for TSO headers, or PCI mapping" - " error\n"); + EFX_ERR(efx, "Out of memory for TSO headers, or PCI mapping error\n"); dev_kfree_skb_any((struct sk_buff *)skb); goto unwind; @@ -1092,9 +1105,19 @@ static int efx_enqueue_skb_tso(struct efx_tx_queue *tx_queue, /* Stop the queue if it wasn't stopped before. */ if (tx_queue->stopped == 1) - efx_stop_queue(tx_queue->efx); + efx_stop_queue(efx); unwind: + /* Free the DMA mapping we were in the process of writing out */ + if (state.unmap_len) { + if (state.unmap_single) + pci_unmap_single(efx->pci_dev, state.unmap_addr, + state.unmap_len, PCI_DMA_TODEVICE); + else + pci_unmap_page(efx->pci_dev, state.unmap_addr, + state.unmap_len, PCI_DMA_TODEVICE); + } + efx_enqueue_unwind(tx_queue); return rc2; } diff --git a/drivers/net/sfc/tx.h b/drivers/net/sfc/tx.h index 1526a73b4b5..5e1cc234e42 100644 --- a/drivers/net/sfc/tx.h +++ b/drivers/net/sfc/tx.h @@ -15,7 +15,7 @@ int efx_probe_tx_queue(struct efx_tx_queue *tx_queue); void efx_remove_tx_queue(struct efx_tx_queue *tx_queue); -int efx_init_tx_queue(struct efx_tx_queue *tx_queue); +void efx_init_tx_queue(struct efx_tx_queue *tx_queue); void efx_fini_tx_queue(struct efx_tx_queue *tx_queue); int efx_hard_start_xmit(struct sk_buff *skb, struct net_device *net_dev); diff --git a/drivers/net/sfc/workarounds.h b/drivers/net/sfc/workarounds.h index 35ab19c27f8..a824f5998c0 100644 --- a/drivers/net/sfc/workarounds.h +++ b/drivers/net/sfc/workarounds.h @@ -20,8 +20,6 @@ /* XAUI resets if link not detected */ #define EFX_WORKAROUND_5147 EFX_WORKAROUND_ALWAYS -/* SNAP frames have TOBE_DISC set */ -#define EFX_WORKAROUND_5475 EFX_WORKAROUND_ALWAYS /* RX PCIe double split performance issue */ #define EFX_WORKAROUND_7575 EFX_WORKAROUND_ALWAYS /* TX pkt parser problem with <= 16 byte TXes */ diff --git a/drivers/net/sfc/xfp_phy.c b/drivers/net/sfc/xfp_phy.c index f3684ad2888..f6edecc2e58 100644 --- a/drivers/net/sfc/xfp_phy.c +++ b/drivers/net/sfc/xfp_phy.c @@ -40,7 +40,7 @@ void xfp_set_led(struct efx_nic *p, int led, int mode) } struct xfp_phy_data { - int tx_disabled; + enum efx_phy_mode phy_mode; }; #define XFP_MAX_RESET_TIME 500 @@ -93,7 +93,7 @@ static int xfp_phy_init(struct efx_nic *efx) " %x)\n", devid, MDIO_ID_OUI(devid), MDIO_ID_MODEL(devid), MDIO_ID_REV(devid)); - phy_data->tx_disabled = efx->tx_disabled; + phy_data->phy_mode = efx->phy_mode; rc = xfp_reset_phy(efx); @@ -136,13 +136,14 @@ static void xfp_phy_reconfigure(struct efx_nic *efx) struct xfp_phy_data *phy_data = efx->phy_data; /* Reset the PHY when moving from tx off to tx on */ - if (phy_data->tx_disabled && !efx->tx_disabled) + if (!(efx->phy_mode & PHY_MODE_TX_DISABLED) && + (phy_data->phy_mode & PHY_MODE_TX_DISABLED)) xfp_reset_phy(efx); mdio_clause45_transmit_disable(efx); mdio_clause45_phy_reconfigure(efx); - phy_data->tx_disabled = efx->tx_disabled; + phy_data->phy_mode = efx->phy_mode; efx->link_up = xfp_link_ok(efx); efx->link_options = GM_LPA_10000FULL; } @@ -151,7 +152,7 @@ static void xfp_phy_reconfigure(struct efx_nic *efx) static void xfp_phy_fini(struct efx_nic *efx) { /* Clobber the LED if it was blinking */ - efx->board_info.blink(efx, 0); + efx->board_info.blink(efx, false); /* Free the context block */ kfree(efx->phy_data); diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index e24b25ca1c6..3805b9318be 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -3732,27 +3732,63 @@ static int sky2_get_eeprom_len(struct net_device *dev) return 1 << ( ((reg2 & PCI_VPD_ROM_SZ) >> 14) + 8); } -static u32 sky2_vpd_read(struct sky2_hw *hw, int cap, u16 offset) +static int sky2_vpd_wait(const struct sky2_hw *hw, int cap, u16 busy) { - u32 val; + unsigned long start = jiffies; - sky2_pci_write16(hw, cap + PCI_VPD_ADDR, offset); + while ( (sky2_pci_read16(hw, cap + PCI_VPD_ADDR) & PCI_VPD_ADDR_F) == busy) { + /* Can take up to 10.6 ms for write */ + if (time_after(jiffies, start + HZ/4)) { + dev_err(&hw->pdev->dev, PFX "VPD cycle timed out"); + return -ETIMEDOUT; + } + mdelay(1); + } - do { - offset = sky2_pci_read16(hw, cap + PCI_VPD_ADDR); - } while (!(offset & PCI_VPD_ADDR_F)); + return 0; +} + +static int sky2_vpd_read(struct sky2_hw *hw, int cap, void *data, + u16 offset, size_t length) +{ + int rc = 0; + + while (length > 0) { + u32 val; + + sky2_pci_write16(hw, cap + PCI_VPD_ADDR, offset); + rc = sky2_vpd_wait(hw, cap, 0); + if (rc) + break; - val = sky2_pci_read32(hw, cap + PCI_VPD_DATA); - return val; + val = sky2_pci_read32(hw, cap + PCI_VPD_DATA); + + memcpy(data, &val, min(sizeof(val), length)); + offset += sizeof(u32); + data += sizeof(u32); + length -= sizeof(u32); + } + + return rc; } -static void sky2_vpd_write(struct sky2_hw *hw, int cap, u16 offset, u32 val) +static int sky2_vpd_write(struct sky2_hw *hw, int cap, const void *data, + u16 offset, unsigned int length) { - sky2_pci_write16(hw, cap + PCI_VPD_DATA, val); - sky2_pci_write32(hw, cap + PCI_VPD_ADDR, offset | PCI_VPD_ADDR_F); - do { - offset = sky2_pci_read16(hw, cap + PCI_VPD_ADDR); - } while (offset & PCI_VPD_ADDR_F); + unsigned int i; + int rc = 0; + + for (i = 0; i < length; i += sizeof(u32)) { + u32 val = *(u32 *)(data + i); + + sky2_pci_write32(hw, cap + PCI_VPD_DATA, val); + sky2_pci_write32(hw, cap + PCI_VPD_ADDR, offset | PCI_VPD_ADDR_F); + + rc = sky2_vpd_wait(hw, cap, PCI_VPD_ADDR_F); + if (rc) + break; + } + return rc; } static int sky2_get_eeprom(struct net_device *dev, struct ethtool_eeprom *eeprom, @@ -3760,24 +3796,13 @@ static int sky2_get_eeprom(struct net_device *dev, struct ethtool_eeprom *eeprom { struct sky2_port *sky2 = netdev_priv(dev); int cap = pci_find_capability(sky2->hw->pdev, PCI_CAP_ID_VPD); - int length = eeprom->len; - u16 offset = eeprom->offset; if (!cap) return -EINVAL; eeprom->magic = SKY2_EEPROM_MAGIC; - while (length > 0) { - u32 val = sky2_vpd_read(sky2->hw, cap, offset); - int n = min_t(int, length, sizeof(val)); - - memcpy(data, &val, n); - length -= n; - data += n; - offset += n; - } - return 0; + return sky2_vpd_read(sky2->hw, cap, data, eeprom->offset, eeprom->len); } static int sky2_set_eeprom(struct net_device *dev, struct ethtool_eeprom *eeprom, @@ -3785,8 +3810,6 @@ static int sky2_set_eeprom(struct net_device *dev, struct ethtool_eeprom *eeprom { struct sky2_port *sky2 = netdev_priv(dev); int cap = pci_find_capability(sky2->hw->pdev, PCI_CAP_ID_VPD); - int length = eeprom->len; - u16 offset = eeprom->offset; if (!cap) return -EINVAL; @@ -3794,21 +3817,11 @@ static int sky2_set_eeprom(struct net_device *dev, struct ethtool_eeprom *eeprom if (eeprom->magic != SKY2_EEPROM_MAGIC) return -EINVAL; - while (length > 0) { - u32 val; - int n = min_t(int, length, sizeof(val)); - - if (n < sizeof(val)) - val = sky2_vpd_read(sky2->hw, cap, offset); - memcpy(&val, data, n); - - sky2_vpd_write(sky2->hw, cap, offset, val); + /* Partial writes not supported */ + if ((eeprom->offset & 3) || (eeprom->len & 3)) + return -EINVAL; - length -= n; - data += n; - offset += n; - } - return 0; + return sky2_vpd_write(sky2->hw, cap, data, eeprom->offset, eeprom->len); } @@ -4178,6 +4191,69 @@ static int __devinit pci_wake_enabled(struct pci_dev *dev) return value & PCI_PM_CTRL_PME_ENABLE; } +/* + * Read and parse the first part of Vital Product Data + */ +#define VPD_SIZE 128 +#define VPD_MAGIC 0x82 + +static void __devinit sky2_vpd_info(struct sky2_hw *hw) +{ + int cap = pci_find_capability(hw->pdev, PCI_CAP_ID_VPD); + const u8 *p; + u8 *vpd_buf = NULL; + u16 len; + static struct vpd_tag { + char tag[2]; + char *label; + } vpd_tags[] = { + { "PN", "Part Number" }, + { "EC", "Engineering Level" }, + { "MN", "Manufacturer" }, + }; + + if (!cap) + goto out; + + vpd_buf = kmalloc(VPD_SIZE, GFP_KERNEL); + if (!vpd_buf) + goto out; + + if (sky2_vpd_read(hw, cap, vpd_buf, 0, VPD_SIZE)) + goto out; + + if (vpd_buf[0] != VPD_MAGIC) + goto out; + len = vpd_buf[1]; + if (len == 0 || len > VPD_SIZE - 4) + goto out; + p = vpd_buf + 3; + dev_info(&hw->pdev->dev, "%.*s\n", len, p); + p += len; + + while (p < vpd_buf + VPD_SIZE - 4) { + int i; + + if (!memcmp("RW", p, 2)) /* end marker */ + break; + + len = p[2]; + if (len > (p - vpd_buf) - 4) + break; + + for (i = 0; i < ARRAY_SIZE(vpd_tags); i++) { + if (!memcmp(vpd_tags[i].tag, p, 2)) { + printk(KERN_DEBUG " %s: %.*s\n", + vpd_tags[i].label, len, p + 3); + break; + } + } + p += len + 3; + } +out: + kfree(vpd_buf); +} + /* This driver supports yukon2 chipset only */ static const char *sky2_name(u8 chipid, char *buf, int sz) { @@ -4276,13 +4352,13 @@ static int __devinit sky2_probe(struct pci_dev *pdev, if (err) goto err_out_iounmap; - dev_info(&pdev->dev, "v%s addr 0x%llx irq %d Yukon-2 %s rev %d\n", - DRV_VERSION, (unsigned long long)pci_resource_start(pdev, 0), - pdev->irq, sky2_name(hw->chip_id, buf1, sizeof(buf1)), - hw->chip_rev); + dev_info(&pdev->dev, "Yukon-2 %s chip revision %d\n", + sky2_name(hw->chip_id, buf1, sizeof(buf1)), hw->chip_rev); sky2_reset(hw); + sky2_vpd_info(hw); + dev = sky2_init_netdev(hw, 0, using_dac, wol_default); if (!dev) { err = -ENOMEM; @@ -4533,6 +4609,8 @@ static struct pci_driver sky2_driver = { static int __init sky2_init_module(void) { + pr_info(PFX "driver version " DRV_VERSION "\n"); + sky2_debug_init(); return pci_register_driver(&sky2_driver); } diff --git a/drivers/net/via-rhine.c b/drivers/net/via-rhine.c index 96dff04334b..5b7870080c5 100644 --- a/drivers/net/via-rhine.c +++ b/drivers/net/via-rhine.c @@ -914,7 +914,7 @@ static void alloc_rbufs(struct net_device *dev) /* Fill in the Rx buffers. Handle allocation failure gracefully. */ for (i = 0; i < RX_RING_SIZE; i++) { - struct sk_buff *skb = dev_alloc_skb(rp->rx_buf_sz); + struct sk_buff *skb = netdev_alloc_skb(dev, rp->rx_buf_sz); rp->rx_skbuff[i] = skb; if (skb == NULL) break; @@ -1473,8 +1473,8 @@ static int rhine_rx(struct net_device *dev, int limit) /* Check if the packet is long enough to accept without copying to a minimally-sized skbuff. */ if (pkt_len < rx_copybreak && - (skb = dev_alloc_skb(pkt_len + 2)) != NULL) { - skb_reserve(skb, 2); /* 16 byte align the IP header */ + (skb = netdev_alloc_skb(dev, pkt_len + NET_IP_ALIGN)) != NULL) { + skb_reserve(skb, NET_IP_ALIGN); /* 16 byte align the IP header */ pci_dma_sync_single_for_cpu(rp->pdev, rp->rx_skbuff_dma[entry], rp->rx_buf_sz, @@ -1518,7 +1518,7 @@ static int rhine_rx(struct net_device *dev, int limit) struct sk_buff *skb; entry = rp->dirty_rx % RX_RING_SIZE; if (rp->rx_skbuff[entry] == NULL) { - skb = dev_alloc_skb(rp->rx_buf_sz); + skb = netdev_alloc_skb(dev, rp->rx_buf_sz); rp->rx_skbuff[entry] = skb; if (skb == NULL) break; /* Better luck next round. */ diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig index 9931b5ab59c..45bdf0b339b 100644 --- a/drivers/net/wireless/Kconfig +++ b/drivers/net/wireless/Kconfig @@ -300,6 +300,19 @@ config LIBERTAS_DEBUG ---help--- Debugging support. +config LIBERTAS_THINFIRM + tristate "Marvell 8xxx Libertas WLAN driver support with thin firmware" + depends on WLAN_80211 && MAC80211 + select FW_LOADER + ---help--- + A library for Marvell Libertas 8xxx devices using thinfirm. + +config LIBERTAS_THINFIRM_USB + tristate "Marvell Libertas 8388 USB 802.11b/g cards with thin firmware" + depends on LIBERTAS_THINFIRM && USB + ---help--- + A driver for Marvell Libertas 8388 USB devices using thinfirm. + config AIRO tristate "Cisco/Aironet 34X/35X/4500/4800 ISA and PCI cards" depends on ISA_DMA_API && WLAN_80211 && (PCI || BROKEN) @@ -322,6 +335,9 @@ config HERMES tristate "Hermes chipset 802.11b support (Orinoco/Prism2/Symbol)" depends on (PPC_PMAC || PCI || PCMCIA) && WLAN_80211 select WIRELESS_EXT + select FW_LOADER + select CRYPTO + select CRYPTO_MICHAEL_MIC ---help--- A driver for 802.11b wireless cards based on the "Hermes" or Intersil HFA384x (Prism 2) MAC controller. This includes the vast @@ -411,7 +427,6 @@ config PCMCIA_HERMES config PCMCIA_SPECTRUM tristate "Symbol Spectrum24 Trilogy PCMCIA card support" depends on PCMCIA && HERMES - select FW_LOADER ---help--- This is a driver for 802.11b cards using RAM-loadable Symbol diff --git a/drivers/net/wireless/Makefile b/drivers/net/wireless/Makefile index 59aa89ec6e8..59d2d805f60 100644 --- a/drivers/net/wireless/Makefile +++ b/drivers/net/wireless/Makefile @@ -16,7 +16,7 @@ obj-$(CONFIG_WAVELAN) += wavelan.o obj-$(CONFIG_PCMCIA_NETWAVE) += netwave_cs.o obj-$(CONFIG_PCMCIA_WAVELAN) += wavelan_cs.o -obj-$(CONFIG_HERMES) += orinoco.o hermes.o +obj-$(CONFIG_HERMES) += orinoco.o hermes.o hermes_dld.o obj-$(CONFIG_PCMCIA_HERMES) += orinoco_cs.o obj-$(CONFIG_APPLE_AIRPORT) += airport.o obj-$(CONFIG_PLX_HERMES) += orinoco_plx.o @@ -48,6 +48,8 @@ obj-$(CONFIG_USB_NET_RNDIS_WLAN) += rndis_wlan.o obj-$(CONFIG_USB_ZD1201) += zd1201.o obj-$(CONFIG_LIBERTAS) += libertas/ +obj-$(CONFIG_LIBERTAS_THINFIRM) += libertas_tf/ + rtl8180-objs := rtl8180_dev.o rtl8180_rtl8225.o rtl8180_sa2400.o rtl8180_max2820.o rtl8180_grf5101.o rtl8187-objs := rtl8187_dev.o rtl8187_rtl8225.o diff --git a/drivers/net/wireless/adm8211.c b/drivers/net/wireless/adm8211.c index 3333d4596b8..c6a55cd12db 100644 --- a/drivers/net/wireless/adm8211.c +++ b/drivers/net/wireless/adm8211.c @@ -1884,6 +1884,7 @@ static int __devinit adm8211_probe(struct pci_dev *pdev, dev->extra_tx_headroom = sizeof(struct adm8211_tx_hdr); /* dev->flags = IEEE80211_HW_RX_INCLUDES_FCS in promisc mode */ dev->flags = IEEE80211_HW_SIGNAL_UNSPEC; + dev->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION); dev->channel_change_time = 1000; dev->max_signal = 100; /* FIXME: find better value */ diff --git a/drivers/net/wireless/airo.c b/drivers/net/wireless/airo.c index b5cd850a4a5..ae58a12befd 100644 --- a/drivers/net/wireless/airo.c +++ b/drivers/net/wireless/airo.c @@ -1915,7 +1915,7 @@ static int mpi_start_xmit(struct sk_buff *skb, struct net_device *dev) { struct airo_info *ai = dev->priv; if (!skb) { - airo_print_err(dev->name, "%s: skb == NULL!",__FUNCTION__); + airo_print_err(dev->name, "%s: skb == NULL!",__func__); return 0; } npacks = skb_queue_len (&ai->txq); @@ -1964,7 +1964,7 @@ static int mpi_send_packet (struct net_device *dev) if ((skb = skb_dequeue(&ai->txq)) == NULL) { airo_print_err(dev->name, "%s: Dequeue'd zero in send_packet()", - __FUNCTION__); + __func__); return 0; } @@ -2115,7 +2115,7 @@ static int airo_start_xmit(struct sk_buff *skb, struct net_device *dev) { u32 *fids = priv->fids; if ( skb == NULL ) { - airo_print_err(dev->name, "%s: skb == NULL!", __FUNCTION__); + airo_print_err(dev->name, "%s: skb == NULL!", __func__); return 0; } @@ -2186,7 +2186,7 @@ static int airo_start_xmit11(struct sk_buff *skb, struct net_device *dev) { } if ( skb == NULL ) { - airo_print_err(dev->name, "%s: skb == NULL!", __FUNCTION__); + airo_print_err(dev->name, "%s: skb == NULL!", __func__); return 0; } @@ -4127,7 +4127,7 @@ static int PC4500_writerid(struct airo_info *ai, u16 rid, if (test_bit(FLAG_ENABLED, &ai->flags) && (RID_WEP_TEMP != rid)) airo_print_err(ai->dev->name, "%s: MAC should be disabled (rid=%04x)", - __FUNCTION__, rid); + __func__, rid); memset(&cmd, 0, sizeof(cmd)); memset(&rsp, 0, sizeof(rsp)); @@ -4142,7 +4142,7 @@ static int PC4500_writerid(struct airo_info *ai, u16 rid, &ai->config_desc.rid_desc, sizeof(Rid)); if (len < 4 || len > 2047) { - airo_print_err(ai->dev->name, "%s: len=%d", __FUNCTION__, len); + airo_print_err(ai->dev->name, "%s: len=%d", __func__, len); rc = -1; } else { memcpy((char *)ai->config_desc.virtual_host_addr, @@ -4151,9 +4151,9 @@ static int PC4500_writerid(struct airo_info *ai, u16 rid, rc = issuecommand(ai, &cmd, &rsp); if ((rc & 0xff00) != 0) { airo_print_err(ai->dev->name, "%s: Write rid Error %d", - __FUNCTION__, rc); + __func__, rc); airo_print_err(ai->dev->name, "%s: Cmd=%04x", - __FUNCTION__, cmd.cmd); + __func__, cmd.cmd); } if ((rsp.status & 0x7f00)) diff --git a/drivers/net/wireless/airport.c b/drivers/net/wireless/airport.c index 6f7eb9f5922..ce03a2e865f 100644 --- a/drivers/net/wireless/airport.c +++ b/drivers/net/wireless/airport.c @@ -180,7 +180,8 @@ airport_attach(struct macio_dev *mdev, const struct of_device_id *match) } /* Allocate space for private device-specific data */ - dev = alloc_orinocodev(sizeof(*card), airport_hard_reset); + dev = alloc_orinocodev(sizeof(*card), &mdev->ofdev.dev, + airport_hard_reset, NULL); if (! dev) { printk(KERN_ERR PFX "Cannot allocate network device\n"); return -ENODEV; diff --git a/drivers/net/wireless/ath5k/Makefile b/drivers/net/wireless/ath5k/Makefile index 564ecd0c5d4..719cfaef708 100644 --- a/drivers/net/wireless/ath5k/Makefile +++ b/drivers/net/wireless/ath5k/Makefile @@ -1,6 +1,14 @@ -ath5k-y += base.o -ath5k-y += hw.o +ath5k-y += caps.o ath5k-y += initvals.o +ath5k-y += eeprom.o +ath5k-y += gpio.o +ath5k-y += desc.o +ath5k-y += dma.o +ath5k-y += qcu.o +ath5k-y += pcu.o ath5k-y += phy.o +ath5k-y += reset.o +ath5k-y += attach.o +ath5k-y += base.o ath5k-$(CONFIG_ATH5K_DEBUG) += debug.o obj-$(CONFIG_ATH5K) += ath5k.o diff --git a/drivers/net/wireless/ath5k/ath5k.h b/drivers/net/wireless/ath5k/ath5k.h index 9102eea3c8b..4c0211798a7 100644 --- a/drivers/net/wireless/ath5k/ath5k.h +++ b/drivers/net/wireless/ath5k/ath5k.h @@ -18,18 +18,23 @@ #ifndef _ATH5K_H #define _ATH5K_H -/* Set this to 1 to disable regulatory domain restrictions for channel tests. - * WARNING: This is for debuging only and has side effects (eg. scan takes too - * long and results timeouts). It's also illegal to tune to some of the - * supported frequencies in some countries, so use this at your own risk, - * you've been warned. */ +/* TODO: Clean up channel debuging -doesn't work anyway- and start + * working on reg. control code using all available eeprom information + * -rev. engineering needed- */ #define CHAN_DEBUG 0 #include <linux/io.h> #include <linux/types.h> #include <net/mac80211.h> -#include "hw.h" +/* RX/TX descriptor hw structs + * TODO: Driver part should only see sw structs */ +#include "desc.h" + +/* EEPROM structs/offsets + * TODO: Make a more generic struct (eg. add more stuff to ath5k_capabilities) + * and clean up common bits, then introduce set/get functions in eeprom.c */ +#include "eeprom.h" /* PCI IDs */ #define PCI_DEVICE_ID_ATHEROS_AR5210 0x0007 /* AR5210 */ @@ -87,7 +92,92 @@ ATH5K_PRINTK_LIMIT(_sc, KERN_ERR, _fmt, ##__VA_ARGS__) /* + * AR5K REGISTER ACCESS + */ + +/* Some macros to read/write fields */ + +/* First shift, then mask */ +#define AR5K_REG_SM(_val, _flags) \ + (((_val) << _flags##_S) & (_flags)) + +/* First mask, then shift */ +#define AR5K_REG_MS(_val, _flags) \ + (((_val) & (_flags)) >> _flags##_S) + +/* Some registers can hold multiple values of interest. For this + * reason when we want to write to these registers we must first + * retrieve the values which we do not want to clear (lets call this + * old_data) and then set the register with this and our new_value: + * ( old_data | new_value) */ +#define AR5K_REG_WRITE_BITS(ah, _reg, _flags, _val) \ + ath5k_hw_reg_write(ah, (ath5k_hw_reg_read(ah, _reg) & ~(_flags)) | \ + (((_val) << _flags##_S) & (_flags)), _reg) + +#define AR5K_REG_MASKED_BITS(ah, _reg, _flags, _mask) \ + ath5k_hw_reg_write(ah, (ath5k_hw_reg_read(ah, _reg) & \ + (_mask)) | (_flags), _reg) + +#define AR5K_REG_ENABLE_BITS(ah, _reg, _flags) \ + ath5k_hw_reg_write(ah, ath5k_hw_reg_read(ah, _reg) | (_flags), _reg) + +#define AR5K_REG_DISABLE_BITS(ah, _reg, _flags) \ + ath5k_hw_reg_write(ah, ath5k_hw_reg_read(ah, _reg) & ~(_flags), _reg) + +/* Access to PHY registers */ +#define AR5K_PHY_READ(ah, _reg) \ + ath5k_hw_reg_read(ah, (ah)->ah_phy + ((_reg) << 2)) + +#define AR5K_PHY_WRITE(ah, _reg, _val) \ + ath5k_hw_reg_write(ah, _val, (ah)->ah_phy + ((_reg) << 2)) + +/* Access QCU registers per queue */ +#define AR5K_REG_READ_Q(ah, _reg, _queue) \ + (ath5k_hw_reg_read(ah, _reg) & (1 << _queue)) \ + +#define AR5K_REG_WRITE_Q(ah, _reg, _queue) \ + ath5k_hw_reg_write(ah, (1 << _queue), _reg) + +#define AR5K_Q_ENABLE_BITS(_reg, _queue) do { \ + _reg |= 1 << _queue; \ +} while (0) + +#define AR5K_Q_DISABLE_BITS(_reg, _queue) do { \ + _reg &= ~(1 << _queue); \ +} while (0) + +/* Used while writing initvals */ +#define AR5K_REG_WAIT(_i) do { \ + if (_i % 64) \ + udelay(1); \ +} while (0) + +/* Register dumps are done per operation mode */ +#define AR5K_INI_RFGAIN_5GHZ 0 +#define AR5K_INI_RFGAIN_2GHZ 1 + +/* TODO: Clean this up */ +#define AR5K_INI_VAL_11A 0 +#define AR5K_INI_VAL_11A_TURBO 1 +#define AR5K_INI_VAL_11B 2 +#define AR5K_INI_VAL_11G 3 +#define AR5K_INI_VAL_11G_TURBO 4 +#define AR5K_INI_VAL_XR 0 +#define AR5K_INI_VAL_MAX 5 + +#define AR5K_RF5111_INI_RF_MAX_BANKS AR5K_MAX_RF_BANKS +#define AR5K_RF5112_INI_RF_MAX_BANKS AR5K_MAX_RF_BANKS + +/* Used for BSSID etc manipulation */ +#define AR5K_LOW_ID(_a)( \ +(_a)[0] | (_a)[1] << 8 | (_a)[2] << 16 | (_a)[3] << 24 \ +) + +#define AR5K_HIGH_ID(_a) ((_a)[4] | (_a)[5] << 8) + +/* * Some tuneable values (these should be changeable by the user) + * TODO: Make use of them and add more options OR use debug/configfs */ #define AR5K_TUNE_DMA_BEACON_RESP 2 #define AR5K_TUNE_SW_BEACON_RESP 10 @@ -98,13 +188,13 @@ #define AR5K_TUNE_REGISTER_TIMEOUT 20000 /* Register for RSSI threshold has a mask of 0xff, so 255 seems to * be the max value. */ -#define AR5K_TUNE_RSSI_THRES 129 +#define AR5K_TUNE_RSSI_THRES 129 /* This must be set when setting the RSSI threshold otherwise it can * prevent a reset. If AR5K_RSSI_THR is read after writing to it * the BMISS_THRES will be seen as 0, seems harware doesn't keep * track of it. Max value depends on harware. For AR5210 this is just 7. * For AR5211+ this seems to be up to 255. */ -#define AR5K_TUNE_BMISS_THRES 7 +#define AR5K_TUNE_BMISS_THRES 7 #define AR5K_TUNE_REGISTER_DWELL_TIME 20000 #define AR5K_TUNE_BEACON_INTERVAL 100 #define AR5K_TUNE_AIFS 2 @@ -123,6 +213,55 @@ #define AR5K_TUNE_ANT_DIVERSITY true #define AR5K_TUNE_HWTXTRIES 4 +#define AR5K_INIT_CARR_SENSE_EN 1 + +/*Swap RX/TX Descriptor for big endian archs*/ +#if defined(__BIG_ENDIAN) +#define AR5K_INIT_CFG ( \ + AR5K_CFG_SWTD | AR5K_CFG_SWRD \ +) +#else +#define AR5K_INIT_CFG 0x00000000 +#endif + +/* Initial values */ +#define AR5K_INIT_TX_LATENCY 502 +#define AR5K_INIT_USEC 39 +#define AR5K_INIT_USEC_TURBO 79 +#define AR5K_INIT_USEC_32 31 +#define AR5K_INIT_SLOT_TIME 396 +#define AR5K_INIT_SLOT_TIME_TURBO 480 +#define AR5K_INIT_ACK_CTS_TIMEOUT 1024 +#define AR5K_INIT_ACK_CTS_TIMEOUT_TURBO 0x08000800 +#define AR5K_INIT_PROG_IFS 920 +#define AR5K_INIT_PROG_IFS_TURBO 960 +#define AR5K_INIT_EIFS 3440 +#define AR5K_INIT_EIFS_TURBO 6880 +#define AR5K_INIT_SIFS 560 +#define AR5K_INIT_SIFS_TURBO 480 +#define AR5K_INIT_SH_RETRY 10 +#define AR5K_INIT_LG_RETRY AR5K_INIT_SH_RETRY +#define AR5K_INIT_SSH_RETRY 32 +#define AR5K_INIT_SLG_RETRY AR5K_INIT_SSH_RETRY +#define AR5K_INIT_TX_RETRY 10 + +#define AR5K_INIT_TRANSMIT_LATENCY ( \ + (AR5K_INIT_TX_LATENCY << 14) | (AR5K_INIT_USEC_32 << 7) | \ + (AR5K_INIT_USEC) \ +) +#define AR5K_INIT_TRANSMIT_LATENCY_TURBO ( \ + (AR5K_INIT_TX_LATENCY << 14) | (AR5K_INIT_USEC_32 << 7) | \ + (AR5K_INIT_USEC_TURBO) \ +) +#define AR5K_INIT_PROTO_TIME_CNTRL ( \ + (AR5K_INIT_CARR_SENSE_EN << 26) | (AR5K_INIT_EIFS << 12) | \ + (AR5K_INIT_PROG_IFS) \ +) +#define AR5K_INIT_PROTO_TIME_CNTRL_TURBO ( \ + (AR5K_INIT_CARR_SENSE_EN << 26) | (AR5K_INIT_EIFS_TURBO << 12) | \ + (AR5K_INIT_PROG_IFS_TURBO) \ +) + /* token to use for aifs, cwmin, cwmax in MadWiFi */ #define AR5K_TXQ_USEDEFAULT ((u32) -1) @@ -196,7 +335,6 @@ struct ath5k_srev_name { #define AR5K_SREV_RAD_5133 0xc0 /* MIMO found on 5418 */ /* IEEE defs */ - #define IEEE80211_MAX_LEN 2500 /* TODO add support to mac80211 for vendor-specific rates and modes */ @@ -268,21 +406,13 @@ enum ath5k_driver_mode { AR5K_MODE_MAX = 5 }; -/* adding this flag to rate_code enables short preamble, see ar5212_reg.h */ -#define AR5K_SET_SHORT_PREAMBLE 0x04 - -#define HAS_SHPREAMBLE(_ix) \ - (rt->rates[_ix].modulation == IEEE80211_RATE_SHORT_PREAMBLE) -#define SHPREAMBLE_FLAG(_ix) \ - (HAS_SHPREAMBLE(_ix) ? AR5K_SET_SHORT_PREAMBLE : 0) - /****************\ TX DEFINITIONS \****************/ /* - * TX Status + * TX Status descriptor */ struct ath5k_tx_status { u16 ts_seqnum; @@ -354,7 +484,6 @@ enum ath5k_tx_queue_id { AR5K_TX_QUEUE_ID_XR_DATA = 9, }; - /* * Flags to set hw queue's parameters... */ @@ -387,7 +516,8 @@ struct ath5k_txq_info { /* * Transmit packet types. - * These are not fully used inside OpenHAL yet + * used on tx control descriptor + * TODO: Use them inside base.c corectly */ enum ath5k_pkt_type { AR5K_PKT_TYPE_NORMAL = 0, @@ -430,7 +560,7 @@ enum ath5k_dmasize { \****************/ /* - * RX Status + * RX Status descriptor */ struct ath5k_rx_status { u16 rs_datalen; @@ -494,34 +624,59 @@ struct ath5k_beacon_state { #define TSF_TO_TU(_tsf) (u32)((_tsf) >> 10) +/*******************************\ + GAIN OPTIMIZATION DEFINITIONS +\*******************************/ + +enum ath5k_rfgain { + AR5K_RFGAIN_INACTIVE = 0, + AR5K_RFGAIN_READ_REQUESTED, + AR5K_RFGAIN_NEED_CHANGE, +}; + +#define AR5K_GAIN_CRN_FIX_BITS_5111 4 +#define AR5K_GAIN_CRN_FIX_BITS_5112 7 +#define AR5K_GAIN_CRN_MAX_FIX_BITS AR5K_GAIN_CRN_FIX_BITS_5112 +#define AR5K_GAIN_DYN_ADJUST_HI_MARGIN 15 +#define AR5K_GAIN_DYN_ADJUST_LO_MARGIN 20 +#define AR5K_GAIN_CCK_PROBE_CORR 5 +#define AR5K_GAIN_CCK_OFDM_GAIN_DELTA 15 +#define AR5K_GAIN_STEP_COUNT 10 +#define AR5K_GAIN_PARAM_TX_CLIP 0 +#define AR5K_GAIN_PARAM_PD_90 1 +#define AR5K_GAIN_PARAM_PD_84 2 +#define AR5K_GAIN_PARAM_GAIN_SEL 3 +#define AR5K_GAIN_PARAM_MIX_ORN 0 +#define AR5K_GAIN_PARAM_PD_138 1 +#define AR5K_GAIN_PARAM_PD_137 2 +#define AR5K_GAIN_PARAM_PD_136 3 +#define AR5K_GAIN_PARAM_PD_132 4 +#define AR5K_GAIN_PARAM_PD_131 5 +#define AR5K_GAIN_PARAM_PD_130 6 +#define AR5K_GAIN_CHECK_ADJUST(_g) \ + ((_g)->g_current <= (_g)->g_low || (_g)->g_current >= (_g)->g_high) + +struct ath5k_gain_opt_step { + s16 gos_param[AR5K_GAIN_CRN_MAX_FIX_BITS]; + s32 gos_gain; +}; + +struct ath5k_gain { + u32 g_step_idx; + u32 g_current; + u32 g_target; + u32 g_low; + u32 g_high; + u32 g_f_corr; + u32 g_active; + const struct ath5k_gain_opt_step *g_step; +}; + + /********************\ COMMON DEFINITIONS \********************/ -/* - * Atheros hardware descriptor - * This is read and written to by the hardware - */ -struct ath5k_desc { - u32 ds_link; /* physical address of the next descriptor */ - u32 ds_data; /* physical address of data buffer (skb) */ - - union { - struct ath5k_hw_5210_tx_desc ds_tx5210; - struct ath5k_hw_5212_tx_desc ds_tx5212; - struct ath5k_hw_all_rx_desc ds_rx; - } ud; -} __packed; - -#define AR5K_RXDESC_INTREQ 0x0020 - -#define AR5K_TXDESC_CLRDMASK 0x0001 -#define AR5K_TXDESC_NOACK 0x0002 /*[5211+]*/ -#define AR5K_TXDESC_RTSENA 0x0004 -#define AR5K_TXDESC_CTSENA 0x0008 -#define AR5K_TXDESC_INTREQ 0x0010 -#define AR5K_TXDESC_VEOL 0x0020 /*[5211+]*/ - #define AR5K_SLOT_TIME_9 396 #define AR5K_SLOT_TIME_20 880 #define AR5K_SLOT_TIME_MAX 0xffff @@ -553,167 +708,79 @@ struct ath5k_desc { #define CHANNEL_MODES CHANNEL_ALL /* - * Used internaly in OpenHAL (ar5211.c/ar5212.c - * for reset_tx_queue). Also see struct struct ieee80211_channel. + * Used internaly for reset_tx_queue). + * Also see struct struct ieee80211_channel. */ #define IS_CHAN_XR(_c) ((_c.hw_value & CHANNEL_XR) != 0) #define IS_CHAN_B(_c) ((_c.hw_value & CHANNEL_B) != 0) /* - * The following structure will be used to map 2GHz channels to + * The following structure is used to map 2GHz channels to * 5GHz Atheros channels. + * TODO: Clean up */ struct ath5k_athchan_2ghz { u32 a2_flags; u16 a2_athchan; }; -/* - * Rate definitions - * TODO: Clean them up or move them on mac80211 -most of these infos are - * used by the rate control algorytm on MadWiFi. - */ -/* Max number of rates on the rate table and what it seems - * Atheros hardware supports */ -#define AR5K_MAX_RATES 32 +/******************\ + RATE DEFINITIONS +\******************/ /** - * struct ath5k_rate - rate structure - * @valid: is this a valid rate for rate control (remove) - * @modulation: respective mac80211 modulation - * @rate_kbps: rate in kbit/s - * @rate_code: hardware rate value, used in &struct ath5k_desc, on RX on - * &struct ath5k_rx_status.rs_rate and on TX on - * &struct ath5k_tx_status.ts_rate. Seems the ar5xxx harware supports - * up to 32 rates, indexed by 1-32. This means we really only need - * 6 bits for the rate_code. - * @dot11_rate: respective IEEE-802.11 rate value - * @control_rate: index of rate assumed to be used to send control frames. - * This can be used to set override the value on the rate duration - * registers. This is only useful if we can override in the harware at - * what rate we want to send control frames at. Note that IEEE-802.11 - * Ch. 9.6 (after IEEE 802.11g changes) defines the rate at which we - * should send ACK/CTS, if we change this value we can be breaking - * the spec. + * Seems the ar5xxx harware supports up to 32 rates, indexed by 1-32. * - * This structure is used to get the RX rate or set the TX rate on the + * The rate code is used to get the RX rate or set the TX rate on the * hardware descriptors. It is also used for internal modulation control * and settings. * - * On RX after the &struct ath5k_desc is parsed by the appropriate - * ah_proc_rx_desc() the respective hardware rate value is set in - * &struct ath5k_rx_status.rs_rate. On TX the desired rate is set in - * &struct ath5k_tx_status.ts_rate which is later used to setup the - * &struct ath5k_desc correctly. This is the hardware rate map we are - * aware of: + * This is the hardware rate map we are aware of: * - * rate_code 1 2 3 4 5 6 7 8 + * rate_code 0x01 0x02 0x03 0x04 0x05 0x06 0x07 0x08 * rate_kbps 3000 1000 ? ? ? 2000 500 48000 * - * rate_code 9 10 11 12 13 14 15 16 + * rate_code 0x09 0x0A 0x0B 0x0C 0x0D 0x0E 0x0F 0x10 * rate_kbps 24000 12000 6000 54000 36000 18000 9000 ? * * rate_code 17 18 19 20 21 22 23 24 * rate_kbps ? ? ? ? ? ? ? 11000 * * rate_code 25 26 27 28 29 30 31 32 - * rate_kbps 5500 2000 1000 ? ? ? ? ? + * rate_kbps 5500 2000 1000 11000S 5500S 2000S ? ? * + * "S" indicates CCK rates with short preamble. + * + * AR5211 has different rate codes for CCK (802.11B) rates. It only uses the + * lowest 4 bits, so they are the same as below with a 0xF mask. + * (0xB, 0xA, 0x9 and 0x8 for 1M, 2M, 5.5M and 11M). + * We handle this in ath5k_setup_bands(). */ -struct ath5k_rate { - u8 valid; - u32 modulation; - u16 rate_kbps; - u8 rate_code; - u8 dot11_rate; - u8 control_rate; -}; - -/* XXX: GRR all this stuff to get leds blinking ??? (check out setcurmode) */ -struct ath5k_rate_table { - u16 rate_count; - u8 rate_code_to_index[AR5K_MAX_RATES]; /* Back-mapping */ - struct ath5k_rate rates[AR5K_MAX_RATES]; -}; - -/* - * Rate tables... - * TODO: CLEAN THIS !!! - */ -#define AR5K_RATES_11A { 8, { \ - 255, 255, 255, 255, 255, 255, 255, 255, 6, 4, 2, 0, \ - 7, 5, 3, 1, 255, 255, 255, 255, 255, 255, 255, 255, \ - 255, 255, 255, 255, 255, 255, 255, 255 }, { \ - { 1, 0, 6000, 11, 140, 0 }, \ - { 1, 0, 9000, 15, 18, 0 }, \ - { 1, 0, 12000, 10, 152, 2 }, \ - { 1, 0, 18000, 14, 36, 2 }, \ - { 1, 0, 24000, 9, 176, 4 }, \ - { 1, 0, 36000, 13, 72, 4 }, \ - { 1, 0, 48000, 8, 96, 4 }, \ - { 1, 0, 54000, 12, 108, 4 } } \ -} - -#define AR5K_RATES_11B { 4, { \ - 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, \ - 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, \ - 3, 2, 1, 0, 255, 255, 255, 255 }, { \ - { 1, 0, 1000, 27, 130, 0 }, \ - { 1, IEEE80211_RATE_SHORT_PREAMBLE, 2000, 26, 132, 1 }, \ - { 1, IEEE80211_RATE_SHORT_PREAMBLE, 5500, 25, 139, 1 }, \ - { 1, IEEE80211_RATE_SHORT_PREAMBLE, 11000, 24, 150, 1 } } \ -} - -#define AR5K_RATES_11G { 12, { \ - 255, 255, 255, 255, 255, 255, 255, 255, 10, 8, 6, 4, \ - 11, 9, 7, 5, 255, 255, 255, 255, 255, 255, 255, 255, \ - 3, 2, 1, 0, 255, 255, 255, 255 }, { \ - { 1, 0, 1000, 27, 2, 0 }, \ - { 1, IEEE80211_RATE_SHORT_PREAMBLE, 2000, 26, 4, 1 }, \ - { 1, IEEE80211_RATE_SHORT_PREAMBLE, 5500, 25, 11, 1 }, \ - { 1, IEEE80211_RATE_SHORT_PREAMBLE, 11000, 24, 22, 1 }, \ - { 0, 0, 6000, 11, 12, 4 }, \ - { 0, 0, 9000, 15, 18, 4 }, \ - { 1, 0, 12000, 10, 24, 6 }, \ - { 1, 0, 18000, 14, 36, 6 }, \ - { 1, 0, 24000, 9, 48, 8 }, \ - { 1, 0, 36000, 13, 72, 8 }, \ - { 1, 0, 48000, 8, 96, 8 }, \ - { 1, 0, 54000, 12, 108, 8 } } \ -} - -#define AR5K_RATES_TURBO { 8, { \ - 255, 255, 255, 255, 255, 255, 255, 255, 6, 4, 2, 0, \ - 7, 5, 3, 1, 255, 255, 255, 255, 255, 255, 255, 255, \ - 255, 255, 255, 255, 255, 255, 255, 255 }, { \ - { 1, MODULATION_TURBO, 6000, 11, 140, 0 }, \ - { 1, MODULATION_TURBO, 9000, 15, 18, 0 }, \ - { 1, MODULATION_TURBO, 12000, 10, 152, 2 }, \ - { 1, MODULATION_TURBO, 18000, 14, 36, 2 }, \ - { 1, MODULATION_TURBO, 24000, 9, 176, 4 }, \ - { 1, MODULATION_TURBO, 36000, 13, 72, 4 }, \ - { 1, MODULATION_TURBO, 48000, 8, 96, 4 }, \ - { 1, MODULATION_TURBO, 54000, 12, 108, 4 } } \ -} +#define AR5K_MAX_RATES 32 -#define AR5K_RATES_XR { 12, { \ - 255, 3, 1, 255, 255, 255, 2, 0, 10, 8, 6, 4, \ - 11, 9, 7, 5, 255, 255, 255, 255, 255, 255, 255, 255, \ - 255, 255, 255, 255, 255, 255, 255, 255 }, { \ - { 1, MODULATION_XR, 500, 7, 129, 0 }, \ - { 1, MODULATION_XR, 1000, 2, 139, 1 }, \ - { 1, MODULATION_XR, 2000, 6, 150, 2 }, \ - { 1, MODULATION_XR, 3000, 1, 150, 3 }, \ - { 1, 0, 6000, 11, 140, 4 }, \ - { 1, 0, 9000, 15, 18, 4 }, \ - { 1, 0, 12000, 10, 152, 6 }, \ - { 1, 0, 18000, 14, 36, 6 }, \ - { 1, 0, 24000, 9, 176, 8 }, \ - { 1, 0, 36000, 13, 72, 8 }, \ - { 1, 0, 48000, 8, 96, 8 }, \ - { 1, 0, 54000, 12, 108, 8 } } \ -} +/* B */ +#define ATH5K_RATE_CODE_1M 0x1B +#define ATH5K_RATE_CODE_2M 0x1A +#define ATH5K_RATE_CODE_5_5M 0x19 +#define ATH5K_RATE_CODE_11M 0x18 +/* A and G */ +#define ATH5K_RATE_CODE_6M 0x0B +#define ATH5K_RATE_CODE_9M 0x0F +#define ATH5K_RATE_CODE_12M 0x0A +#define ATH5K_RATE_CODE_18M 0x0E +#define ATH5K_RATE_CODE_24M 0x09 +#define ATH5K_RATE_CODE_36M 0x0D +#define ATH5K_RATE_CODE_48M 0x08 +#define ATH5K_RATE_CODE_54M 0x0C +/* XR */ +#define ATH5K_RATE_CODE_XR_500K 0x07 +#define ATH5K_RATE_CODE_XR_1M 0x02 +#define ATH5K_RATE_CODE_XR_2M 0x06 +#define ATH5K_RATE_CODE_XR_3M 0x01 + +/* adding this flag to rate_code enables short preamble */ +#define AR5K_SET_SHORT_PREAMBLE 0x04 /* * Crypto definitions @@ -735,7 +802,6 @@ struct ath5k_rate_table { return (false); \ } while (0) - enum ath5k_ant_setting { AR5K_ANT_VARIABLE = 0, /* variable by programming */ AR5K_ANT_FIXED_A = 1, /* fixed to 11a frequencies */ @@ -846,7 +912,8 @@ enum ath5k_power_mode { /* * These match net80211 definitions (not used in - * d80211). + * mac80211). + * TODO: Clean this up */ #define AR5K_LED_INIT 0 /*IEEE80211_S_INIT*/ #define AR5K_LED_SCAN 1 /*IEEE80211_S_SCAN*/ @@ -862,7 +929,8 @@ enum ath5k_power_mode { /* * Chipset capabilities -see ath5k_hw_get_capability- * get_capability function is not yet fully implemented - * in OpenHAL so most of these don't work yet... + * in ath5k so most of these don't work yet... + * TODO: Implement these & merge with _TUNE_ stuff above */ enum ath5k_capability_type { AR5K_CAP_REG_DMN = 0, /* Used to get current reg. domain id */ @@ -931,6 +999,7 @@ struct ath5k_capabilities { #define AR5K_MAX_GPIO 10 #define AR5K_MAX_RF_BANKS 8 +/* TODO: Clean up and merge with ath5k_softc */ struct ath5k_hw { u32 ah_magic; @@ -1023,11 +1092,13 @@ struct ath5k_hw { /* * Function pointers */ + int (*ah_setup_rx_desc)(struct ath5k_hw *ah, struct ath5k_desc *desc, + u32 size, unsigned int flags); int (*ah_setup_tx_desc)(struct ath5k_hw *, struct ath5k_desc *, unsigned int, unsigned int, enum ath5k_pkt_type, unsigned int, unsigned int, unsigned int, unsigned int, unsigned int, unsigned int, unsigned int, unsigned int); - int (*ah_setup_xtx_desc)(struct ath5k_hw *, struct ath5k_desc *, + int (*ah_setup_mrr_tx_desc)(struct ath5k_hw *, struct ath5k_desc *, unsigned int, unsigned int, unsigned int, unsigned int, unsigned int, unsigned int); int (*ah_proc_tx_desc)(struct ath5k_hw *, struct ath5k_desc *, @@ -1040,33 +1111,38 @@ struct ath5k_hw { * Prototypes */ -/* General Functions */ -extern int ath5k_hw_register_timeout(struct ath5k_hw *ah, u32 reg, u32 flag, u32 val, bool is_set); /* Attach/Detach Functions */ extern struct ath5k_hw *ath5k_hw_attach(struct ath5k_softc *sc, u8 mac_version); -extern const struct ath5k_rate_table *ath5k_hw_get_rate_table(struct ath5k_hw *ah, unsigned int mode); extern void ath5k_hw_detach(struct ath5k_hw *ah); + /* Reset Functions */ +extern int ath5k_hw_nic_wakeup(struct ath5k_hw *ah, int flags, bool initial); extern int ath5k_hw_reset(struct ath5k_hw *ah, enum ieee80211_if_types op_mode, struct ieee80211_channel *channel, bool change_channel); /* Power management functions */ extern int ath5k_hw_set_power(struct ath5k_hw *ah, enum ath5k_power_mode mode, bool set_chip, u16 sleep_duration); + /* DMA Related Functions */ -extern void ath5k_hw_start_rx(struct ath5k_hw *ah); +extern void ath5k_hw_start_rx_dma(struct ath5k_hw *ah); extern int ath5k_hw_stop_rx_dma(struct ath5k_hw *ah); -extern u32 ath5k_hw_get_rx_buf(struct ath5k_hw *ah); -extern void ath5k_hw_put_rx_buf(struct ath5k_hw *ah, u32 phys_addr); -extern int ath5k_hw_tx_start(struct ath5k_hw *ah, unsigned int queue); +extern u32 ath5k_hw_get_rxdp(struct ath5k_hw *ah); +extern void ath5k_hw_set_rxdp(struct ath5k_hw *ah, u32 phys_addr); +extern int ath5k_hw_start_tx_dma(struct ath5k_hw *ah, unsigned int queue); extern int ath5k_hw_stop_tx_dma(struct ath5k_hw *ah, unsigned int queue); -extern u32 ath5k_hw_get_tx_buf(struct ath5k_hw *ah, unsigned int queue); -extern int ath5k_hw_put_tx_buf(struct ath5k_hw *ah, unsigned int queue, u32 phys_addr); +extern u32 ath5k_hw_get_txdp(struct ath5k_hw *ah, unsigned int queue); +extern int ath5k_hw_set_txdp(struct ath5k_hw *ah, unsigned int queue, + u32 phys_addr); extern int ath5k_hw_update_tx_triglevel(struct ath5k_hw *ah, bool increase); /* Interrupt handling */ extern bool ath5k_hw_is_intr_pending(struct ath5k_hw *ah); extern int ath5k_hw_get_isr(struct ath5k_hw *ah, enum ath5k_int *interrupt_mask); -extern enum ath5k_int ath5k_hw_set_intr(struct ath5k_hw *ah, enum ath5k_int new_mask); +extern enum ath5k_int ath5k_hw_set_imr(struct ath5k_hw *ah, enum +ath5k_int new_mask); extern void ath5k_hw_update_mib_counters(struct ath5k_hw *ah, struct ieee80211_low_level_stats *stats); + /* EEPROM access functions */ -extern int ath5k_hw_set_regdomain(struct ath5k_hw *ah, u16 regdomain); +extern int ath5k_eeprom_init(struct ath5k_hw *ah); +extern int ath5k_eeprom_read_mac(struct ath5k_hw *ah, u8 *mac); + /* Protocol Control Unit Functions */ extern int ath5k_hw_set_opmode(struct ath5k_hw *ah); /* BSSID Functions */ @@ -1076,14 +1152,14 @@ extern void ath5k_hw_set_associd(struct ath5k_hw *ah, const u8 *bssid, u16 assoc extern int ath5k_hw_set_bssid_mask(struct ath5k_hw *ah, const u8 *mask); /* Receive start/stop functions */ extern void ath5k_hw_start_rx_pcu(struct ath5k_hw *ah); -extern void ath5k_hw_stop_pcu_recv(struct ath5k_hw *ah); +extern void ath5k_hw_stop_rx_pcu(struct ath5k_hw *ah); /* RX Filter functions */ extern void ath5k_hw_set_mcast_filter(struct ath5k_hw *ah, u32 filter0, u32 filter1); -extern int ath5k_hw_set_mcast_filterindex(struct ath5k_hw *ah, u32 index); +extern int ath5k_hw_set_mcast_filter_idx(struct ath5k_hw *ah, u32 index); extern int ath5k_hw_clear_mcast_filter_idx(struct ath5k_hw *ah, u32 index); extern u32 ath5k_hw_get_rx_filter(struct ath5k_hw *ah); extern void ath5k_hw_set_rx_filter(struct ath5k_hw *ah, u32 filter); -/* Beacon related functions */ +/* Beacon control functions */ extern u32 ath5k_hw_get_tsf32(struct ath5k_hw *ah); extern u64 ath5k_hw_get_tsf64(struct ath5k_hw *ah); extern void ath5k_hw_reset_tsf(struct ath5k_hw *ah); @@ -1105,61 +1181,129 @@ extern int ath5k_hw_reset_key(struct ath5k_hw *ah, u16 entry); extern int ath5k_hw_is_key_valid(struct ath5k_hw *ah, u16 entry); extern int ath5k_hw_set_key(struct ath5k_hw *ah, u16 entry, const struct ieee80211_key_conf *key, const u8 *mac); extern int ath5k_hw_set_key_lladdr(struct ath5k_hw *ah, u16 entry, const u8 *mac); + /* Queue Control Unit, DFS Control Unit Functions */ -extern int ath5k_hw_setup_tx_queue(struct ath5k_hw *ah, enum ath5k_tx_queue queue_type, struct ath5k_txq_info *queue_info); -extern int ath5k_hw_setup_tx_queueprops(struct ath5k_hw *ah, int queue, const struct ath5k_txq_info *queue_info); extern int ath5k_hw_get_tx_queueprops(struct ath5k_hw *ah, int queue, struct ath5k_txq_info *queue_info); +extern int ath5k_hw_set_tx_queueprops(struct ath5k_hw *ah, int queue, + const struct ath5k_txq_info *queue_info); +extern int ath5k_hw_setup_tx_queue(struct ath5k_hw *ah, + enum ath5k_tx_queue queue_type, + struct ath5k_txq_info *queue_info); +extern u32 ath5k_hw_num_tx_pending(struct ath5k_hw *ah, unsigned int queue); extern void ath5k_hw_release_tx_queue(struct ath5k_hw *ah, unsigned int queue); extern int ath5k_hw_reset_tx_queue(struct ath5k_hw *ah, unsigned int queue); -extern u32 ath5k_hw_num_tx_pending(struct ath5k_hw *ah, unsigned int queue); -extern int ath5k_hw_set_slot_time(struct ath5k_hw *ah, unsigned int slot_time); extern unsigned int ath5k_hw_get_slot_time(struct ath5k_hw *ah); +extern int ath5k_hw_set_slot_time(struct ath5k_hw *ah, unsigned int slot_time); + /* Hardware Descriptor Functions */ -extern int ath5k_hw_setup_rx_desc(struct ath5k_hw *ah, struct ath5k_desc *desc, u32 size, unsigned int flags); +extern int ath5k_hw_init_desc_functions(struct ath5k_hw *ah); + /* GPIO Functions */ extern void ath5k_hw_set_ledstate(struct ath5k_hw *ah, unsigned int state); -extern int ath5k_hw_set_gpio_output(struct ath5k_hw *ah, u32 gpio); extern int ath5k_hw_set_gpio_input(struct ath5k_hw *ah, u32 gpio); +extern int ath5k_hw_set_gpio_output(struct ath5k_hw *ah, u32 gpio); extern u32 ath5k_hw_get_gpio(struct ath5k_hw *ah, u32 gpio); extern int ath5k_hw_set_gpio(struct ath5k_hw *ah, u32 gpio, u32 val); extern void ath5k_hw_set_gpio_intr(struct ath5k_hw *ah, unsigned int gpio, u32 interrupt_level); + /* Misc functions */ +int ath5k_hw_set_capabilities(struct ath5k_hw *ah); extern int ath5k_hw_get_capability(struct ath5k_hw *ah, enum ath5k_capability_type cap_type, u32 capability, u32 *result); - +extern int ath5k_hw_enable_pspoll(struct ath5k_hw *ah, u8 *bssid, u16 assoc_id); +extern int ath5k_hw_disable_pspoll(struct ath5k_hw *ah); /* Initial register settings functions */ extern int ath5k_hw_write_initvals(struct ath5k_hw *ah, u8 mode, bool change_channel); + /* Initialize RF */ extern int ath5k_hw_rfregs(struct ath5k_hw *ah, struct ieee80211_channel *channel, unsigned int mode); extern int ath5k_hw_rfgain(struct ath5k_hw *ah, unsigned int freq); extern enum ath5k_rfgain ath5k_hw_get_rf_gain(struct ath5k_hw *ah); extern int ath5k_hw_set_rfgain_opt(struct ath5k_hw *ah); - - /* PHY/RF channel functions */ extern bool ath5k_channel_ok(struct ath5k_hw *ah, u16 freq, unsigned int flags); extern int ath5k_hw_channel(struct ath5k_hw *ah, struct ieee80211_channel *channel); /* PHY calibration */ extern int ath5k_hw_phy_calibrate(struct ath5k_hw *ah, struct ieee80211_channel *channel); -extern int ath5k_hw_phy_disable(struct ath5k_hw *ah); +extern int ath5k_hw_noise_floor_calibration(struct ath5k_hw *ah, short freq); /* Misc PHY functions */ extern u16 ath5k_hw_radio_revision(struct ath5k_hw *ah, unsigned int chan); extern void ath5k_hw_set_def_antenna(struct ath5k_hw *ah, unsigned int ant); extern unsigned int ath5k_hw_get_def_antenna(struct ath5k_hw *ah); -extern int ath5k_hw_noise_floor_calibration(struct ath5k_hw *ah, short freq); +extern int ath5k_hw_phy_disable(struct ath5k_hw *ah); /* TX power setup */ extern int ath5k_hw_txpower(struct ath5k_hw *ah, struct ieee80211_channel *channel, unsigned int txpower); extern int ath5k_hw_set_txpower_limit(struct ath5k_hw *ah, unsigned int power); +/* + * Functions used internaly + */ +/* + * Translate usec to hw clock units + */ +static inline unsigned int ath5k_hw_htoclock(unsigned int usec, bool turbo) +{ + return turbo ? (usec * 80) : (usec * 40); +} + +/* + * Translate hw clock units to usec + */ +static inline unsigned int ath5k_hw_clocktoh(unsigned int clock, bool turbo) +{ + return turbo ? (clock / 80) : (clock / 40); +} + +/* + * Read from a register + */ static inline u32 ath5k_hw_reg_read(struct ath5k_hw *ah, u16 reg) { return ioread32(ah->ah_iobase + reg); } +/* + * Write to a register + */ static inline void ath5k_hw_reg_write(struct ath5k_hw *ah, u32 val, u16 reg) { iowrite32(val, ah->ah_iobase + reg); } +#if defined(_ATH5K_RESET) || defined(_ATH5K_PHY) +/* + * Check if a register write has been completed + */ +static int ath5k_hw_register_timeout(struct ath5k_hw *ah, u32 reg, u32 flag, + u32 val, bool is_set) +{ + int i; + u32 data; + + for (i = AR5K_TUNE_REGISTER_TIMEOUT; i > 0; i--) { + data = ath5k_hw_reg_read(ah, reg); + if (is_set && (data & flag)) + break; + else if ((data & flag) == val) + break; + udelay(15); + } + + return (i <= 0) ? -EAGAIN : 0; +} +#endif + +static inline u32 ath5k_hw_bitswap(u32 val, unsigned int bits) +{ + u32 retval = 0, bit, i; + + for (i = 0; i < bits; i++) { + bit = (val >> i) & 1; + retval = (retval << 1) | bit; + } + + return retval; +} + #endif diff --git a/drivers/net/wireless/ath5k/attach.c b/drivers/net/wireless/ath5k/attach.c new file mode 100644 index 00000000000..0eb2511fe14 --- /dev/null +++ b/drivers/net/wireless/ath5k/attach.c @@ -0,0 +1,315 @@ +/* + * Copyright (c) 2004-2008 Reyk Floeter <reyk@openbsd.org> + * Copyright (c) 2006-2008 Nick Kossifidis <mickflemm@gmail.com> + * + * Permission to use, copy, modify, and distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * + */ + +/*************************************\ +* Attach/Detach Functions and helpers * +\*************************************/ + +#include <linux/pci.h> +#include "ath5k.h" +#include "reg.h" +#include "debug.h" +#include "base.h" + +/** + * ath5k_hw_post - Power On Self Test helper function + * + * @ah: The &struct ath5k_hw + */ +static int ath5k_hw_post(struct ath5k_hw *ah) +{ + + int i, c; + u16 cur_reg; + u16 regs[2] = {AR5K_STA_ID0, AR5K_PHY(8)}; + u32 var_pattern; + u32 static_pattern[4] = { + 0x55555555, 0xaaaaaaaa, + 0x66666666, 0x99999999 + }; + u32 init_val; + u32 cur_val; + + for (c = 0; c < 2; c++) { + + cur_reg = regs[c]; + + /* Save previous value */ + init_val = ath5k_hw_reg_read(ah, cur_reg); + + for (i = 0; i < 256; i++) { + var_pattern = i << 16 | i; + ath5k_hw_reg_write(ah, var_pattern, cur_reg); + cur_val = ath5k_hw_reg_read(ah, cur_reg); + + if (cur_val != var_pattern) { + ATH5K_ERR(ah->ah_sc, "POST Failed !!!\n"); + return -EAGAIN; + } + + /* Found on ndiswrapper dumps */ + var_pattern = 0x0039080f; + ath5k_hw_reg_write(ah, var_pattern, cur_reg); + } + + for (i = 0; i < 4; i++) { + var_pattern = static_pattern[i]; + ath5k_hw_reg_write(ah, var_pattern, cur_reg); + cur_val = ath5k_hw_reg_read(ah, cur_reg); + + if (cur_val != var_pattern) { + ATH5K_ERR(ah->ah_sc, "POST Failed !!!\n"); + return -EAGAIN; + } + + /* Found on ndiswrapper dumps */ + var_pattern = 0x003b080f; + ath5k_hw_reg_write(ah, var_pattern, cur_reg); + } + + /* Restore previous value */ + ath5k_hw_reg_write(ah, init_val, cur_reg); + + } + + return 0; + +} + +/** + * ath5k_hw_attach - Check if hw is supported and init the needed structs + * + * @sc: The &struct ath5k_softc we got from the driver's attach function + * @mac_version: The mac version id (check out ath5k.h) based on pci id + * + * Check if the device is supported, perform a POST and initialize the needed + * structs. Returns -ENOMEM if we don't have memory for the needed structs, + * -ENODEV if the device is not supported or prints an error msg if something + * else went wrong. + */ +struct ath5k_hw *ath5k_hw_attach(struct ath5k_softc *sc, u8 mac_version) +{ + struct ath5k_hw *ah; + struct pci_dev *pdev = sc->pdev; + u8 mac[ETH_ALEN]; + int ret; + u32 srev; + + /*If we passed the test malloc a ath5k_hw struct*/ + ah = kzalloc(sizeof(struct ath5k_hw), GFP_KERNEL); + if (ah == NULL) { + ret = -ENOMEM; + ATH5K_ERR(sc, "out of memory\n"); + goto err; + } + + ah->ah_sc = sc; + ah->ah_iobase = sc->iobase; + + /* + * HW information + */ + ah->ah_op_mode = IEEE80211_IF_TYPE_STA; + ah->ah_radar.r_enabled = AR5K_TUNE_RADAR_ALERT; + ah->ah_turbo = false; + ah->ah_txpower.txp_tpc = AR5K_TUNE_TPC_TXPOWER; + ah->ah_imr = 0; + ah->ah_atim_window = 0; + ah->ah_aifs = AR5K_TUNE_AIFS; + ah->ah_cw_min = AR5K_TUNE_CWMIN; + ah->ah_limit_tx_retries = AR5K_INIT_TX_RETRY; + ah->ah_software_retry = false; + ah->ah_ant_diversity = AR5K_TUNE_ANT_DIVERSITY; + + /* + * Set the mac revision based on the pci id + */ + ah->ah_version = mac_version; + + /*Fill the ath5k_hw struct with the needed functions*/ + ret = ath5k_hw_init_desc_functions(ah); + if (ret) + goto err_free; + + /* Bring device out of sleep and reset it's units */ + ret = ath5k_hw_nic_wakeup(ah, CHANNEL_B, true); + if (ret) + goto err_free; + + /* Get MAC, PHY and RADIO revisions */ + srev = ath5k_hw_reg_read(ah, AR5K_SREV); + ah->ah_mac_srev = srev; + ah->ah_mac_version = AR5K_REG_MS(srev, AR5K_SREV_VER); + ah->ah_mac_revision = AR5K_REG_MS(srev, AR5K_SREV_REV); + ah->ah_phy_revision = ath5k_hw_reg_read(ah, AR5K_PHY_CHIP_ID) & + 0xffffffff; + ah->ah_radio_5ghz_revision = ath5k_hw_radio_revision(ah, + CHANNEL_5GHZ); + + if (ah->ah_version == AR5K_AR5210) + ah->ah_radio_2ghz_revision = 0; + else + ah->ah_radio_2ghz_revision = ath5k_hw_radio_revision(ah, + CHANNEL_2GHZ); + + /* Return on unsuported chips (unsupported eeprom etc) */ + if ((srev >= AR5K_SREV_VER_AR5416) && + (srev < AR5K_SREV_VER_AR2425)) { + ATH5K_ERR(sc, "Device not yet supported.\n"); + ret = -ENODEV; + goto err_free; + } else if (srev == AR5K_SREV_VER_AR2425) { + ATH5K_WARN(sc, "Support for RF2425 is under development.\n"); + } + + /* Identify single chip solutions */ + if (((srev <= AR5K_SREV_VER_AR5414) && + (srev >= AR5K_SREV_VER_AR2413)) || + (srev == AR5K_SREV_VER_AR2425)) { + ah->ah_single_chip = true; + } else { + ah->ah_single_chip = false; + } + + /* Single chip radio */ + if (ah->ah_radio_2ghz_revision == ah->ah_radio_5ghz_revision) + ah->ah_radio_2ghz_revision = 0; + + /* Identify the radio chip*/ + if (ah->ah_version == AR5K_AR5210) { + ah->ah_radio = AR5K_RF5110; + /* + * Register returns 0x0/0x04 for radio revision + * so ath5k_hw_radio_revision doesn't parse the value + * correctly. For now we are based on mac's srev to + * identify RF2425 radio. + */ + } else if (srev == AR5K_SREV_VER_AR2425) { + ah->ah_radio = AR5K_RF2425; + ah->ah_phy_spending = AR5K_PHY_SPENDING_RF2425; + } else if (ah->ah_radio_5ghz_revision < AR5K_SREV_RAD_5112) { + ah->ah_radio = AR5K_RF5111; + ah->ah_phy_spending = AR5K_PHY_SPENDING_RF5111; + } else if (ah->ah_radio_5ghz_revision < AR5K_SREV_RAD_SC0) { + ah->ah_radio = AR5K_RF5112; + ah->ah_phy_spending = AR5K_PHY_SPENDING_RF5112; + } else if (ah->ah_radio_5ghz_revision < AR5K_SREV_RAD_SC1) { + ah->ah_radio = AR5K_RF2413; + ah->ah_phy_spending = AR5K_PHY_SPENDING_RF2413; + } else if (ah->ah_radio_5ghz_revision < AR5K_SREV_RAD_SC2) { + ah->ah_radio = AR5K_RF5413; + ah->ah_phy_spending = AR5K_PHY_SPENDING_RF5413; + } else if (ah->ah_radio_5ghz_revision < AR5K_SREV_RAD_5133) { + /* AR5424 */ + if (srev >= AR5K_SREV_VER_AR5424) { + ah->ah_radio = AR5K_RF5413; + ah->ah_phy_spending = AR5K_PHY_SPENDING_RF5413; + /* AR2424 */ + } else { + ah->ah_radio = AR5K_RF2413; /* For testing */ + ah->ah_phy_spending = AR5K_PHY_SPENDING_RF2413; + } + } + ah->ah_phy = AR5K_PHY(0); + + /* + * Write PCI-E power save settings + */ + if ((ah->ah_version == AR5K_AR5212) && (pdev->is_pcie)) { + ath5k_hw_reg_write(ah, 0x9248fc00, 0x4080); + ath5k_hw_reg_write(ah, 0x24924924, 0x4080); + ath5k_hw_reg_write(ah, 0x28000039, 0x4080); + ath5k_hw_reg_write(ah, 0x53160824, 0x4080); + ath5k_hw_reg_write(ah, 0xe5980579, 0x4080); + ath5k_hw_reg_write(ah, 0x001defff, 0x4080); + ath5k_hw_reg_write(ah, 0x1aaabe40, 0x4080); + ath5k_hw_reg_write(ah, 0xbe105554, 0x4080); + ath5k_hw_reg_write(ah, 0x000e3007, 0x4080); + ath5k_hw_reg_write(ah, 0x00000000, 0x4084); + } + + /* + * POST + */ + ret = ath5k_hw_post(ah); + if (ret) + goto err_free; + + /* Write AR5K_PCICFG_UNK on 2112B and later chips */ + if (ah->ah_radio_5ghz_revision > AR5K_SREV_RAD_2112B || + srev > AR5K_SREV_VER_AR2413) { + ath5k_hw_reg_write(ah, AR5K_PCICFG_UNK, AR5K_PCICFG); + } + + /* + * Get card capabilities, values, ... + */ + ret = ath5k_eeprom_init(ah); + if (ret) { + ATH5K_ERR(sc, "unable to init EEPROM\n"); + goto err_free; + } + + /* Get misc capabilities */ + ret = ath5k_hw_set_capabilities(ah); + if (ret) { + ATH5K_ERR(sc, "unable to get device capabilities: 0x%04x\n", + sc->pdev->device); + goto err_free; + } + + /* Get MAC address */ + ret = ath5k_eeprom_read_mac(ah, mac); + if (ret) { + ATH5K_ERR(sc, "unable to read address from EEPROM: 0x%04x\n", + sc->pdev->device); + goto err_free; + } + + ath5k_hw_set_lladdr(ah, mac); + /* Set BSSID to bcast address: ff:ff:ff:ff:ff:ff for now */ + memset(ah->ah_bssid, 0xff, ETH_ALEN); + ath5k_hw_set_associd(ah, ah->ah_bssid, 0); + ath5k_hw_set_opmode(ah); + + ath5k_hw_set_rfgain_opt(ah); + + return ah; +err_free: + kfree(ah); +err: + return ERR_PTR(ret); +} + +/** + * ath5k_hw_detach - Free the ath5k_hw struct + * + * @ah: The &struct ath5k_hw + */ +void ath5k_hw_detach(struct ath5k_hw *ah) +{ + ATH5K_TRACE(ah->ah_sc); + + __set_bit(ATH_STAT_INVALID, ah->ah_sc->status); + + if (ah->ah_rf_banks != NULL) + kfree(ah->ah_rf_banks); + + /* assume interrupts are down */ + kfree(ah); +} diff --git a/drivers/net/wireless/ath5k/base.c b/drivers/net/wireless/ath5k/base.c index 0676c6d8438..85260c39aa2 100644 --- a/drivers/net/wireless/ath5k/base.c +++ b/drivers/net/wireless/ath5k/base.c @@ -132,6 +132,48 @@ static struct ath5k_srev_name srev_names[] = { { "xxxxx", AR5K_VERSION_RAD, AR5K_SREV_UNKNOWN }, }; +static struct ieee80211_rate ath5k_rates[] = { + { .bitrate = 10, + .hw_value = ATH5K_RATE_CODE_1M, }, + { .bitrate = 20, + .hw_value = ATH5K_RATE_CODE_2M, + .hw_value_short = ATH5K_RATE_CODE_2M | AR5K_SET_SHORT_PREAMBLE, + .flags = IEEE80211_RATE_SHORT_PREAMBLE }, + { .bitrate = 55, + .hw_value = ATH5K_RATE_CODE_5_5M, + .hw_value_short = ATH5K_RATE_CODE_5_5M | AR5K_SET_SHORT_PREAMBLE, + .flags = IEEE80211_RATE_SHORT_PREAMBLE }, + { .bitrate = 110, + .hw_value = ATH5K_RATE_CODE_11M, + .hw_value_short = ATH5K_RATE_CODE_11M | AR5K_SET_SHORT_PREAMBLE, + .flags = IEEE80211_RATE_SHORT_PREAMBLE }, + { .bitrate = 60, + .hw_value = ATH5K_RATE_CODE_6M, + .flags = 0 }, + { .bitrate = 90, + .hw_value = ATH5K_RATE_CODE_9M, + .flags = 0 }, + { .bitrate = 120, + .hw_value = ATH5K_RATE_CODE_12M, + .flags = 0 }, + { .bitrate = 180, + .hw_value = ATH5K_RATE_CODE_18M, + .flags = 0 }, + { .bitrate = 240, + .hw_value = ATH5K_RATE_CODE_24M, + .flags = 0 }, + { .bitrate = 360, + .hw_value = ATH5K_RATE_CODE_36M, + .flags = 0 }, + { .bitrate = 480, + .hw_value = ATH5K_RATE_CODE_48M, + .flags = 0 }, + { .bitrate = 540, + .hw_value = ATH5K_RATE_CODE_54M, + .flags = 0 }, + /* XR missing */ +}; + /* * Prototypes - PCI stack related functions */ @@ -162,7 +204,8 @@ static struct pci_driver ath5k_pci_driver = { * Prototypes - MAC 802.11 stack related functions */ static int ath5k_tx(struct ieee80211_hw *hw, struct sk_buff *skb); -static int ath5k_reset(struct ieee80211_hw *hw); +static int ath5k_reset(struct ath5k_softc *sc, bool stop, bool change_channel); +static int ath5k_reset_wake(struct ath5k_softc *sc); static int ath5k_start(struct ieee80211_hw *hw); static void ath5k_stop(struct ieee80211_hw *hw); static int ath5k_add_interface(struct ieee80211_hw *hw, @@ -218,20 +261,16 @@ static void ath5k_detach(struct pci_dev *pdev, struct ieee80211_hw *hw); /* Channel/mode setup */ static inline short ath5k_ieee2mhz(short chan); -static unsigned int ath5k_copy_rates(struct ieee80211_rate *rates, - const struct ath5k_rate_table *rt, - unsigned int max); static unsigned int ath5k_copy_channels(struct ath5k_hw *ah, struct ieee80211_channel *channels, unsigned int mode, unsigned int max); -static int ath5k_getchannels(struct ieee80211_hw *hw); +static int ath5k_setup_bands(struct ieee80211_hw *hw); static int ath5k_chan_set(struct ath5k_softc *sc, struct ieee80211_channel *chan); static void ath5k_setcurmode(struct ath5k_softc *sc, unsigned int mode); static void ath5k_mode_setup(struct ath5k_softc *sc); -static void ath5k_set_total_hw_rates(struct ath5k_softc *sc); /* Descriptor setup */ static int ath5k_desc_alloc(struct ath5k_softc *sc, @@ -446,6 +485,12 @@ ath5k_pci_probe(struct pci_dev *pdev, hw->flags = IEEE80211_HW_RX_INCLUDES_FCS | IEEE80211_HW_SIGNAL_DBM | IEEE80211_HW_NOISE_DBM; + + hw->wiphy->interface_modes = + BIT(NL80211_IFTYPE_STATION) | + BIT(NL80211_IFTYPE_ADHOC) | + BIT(NL80211_IFTYPE_MESH_POINT); + hw->extra_tx_headroom = 2; hw->channel_change_time = 5000; sc = hw->priv; @@ -646,7 +691,6 @@ err_no_irq: #endif /* CONFIG_PM */ - /***********************\ * Driver Initialization * \***********************/ @@ -669,7 +713,7 @@ ath5k_attach(struct pci_dev *pdev, struct ieee80211_hw *hw) * return false w/o doing anything. MAC's that do * support it will return true w/o doing anything. */ - ret = ah->ah_setup_xtx_desc(ah, NULL, 0, 0, 0, 0, 0, 0); + ret = ah->ah_setup_mrr_tx_desc(ah, NULL, 0, 0, 0, 0, 0, 0); if (ret < 0) goto err; if (ret > 0) @@ -688,15 +732,12 @@ ath5k_attach(struct pci_dev *pdev, struct ieee80211_hw *hw) * on settings like the phy mode and regulatory * domain restrictions. */ - ret = ath5k_getchannels(hw); + ret = ath5k_setup_bands(hw); if (ret) { ATH5K_ERR(sc, "can't get channels\n"); goto err; } - /* Set *_rates so we can map hw rate index */ - ath5k_set_total_hw_rates(sc); - /* NB: setup here so ath5k_rate_update is happy */ if (test_bit(AR5K_MODE_11A, ah->ah_modes)) ath5k_setcurmode(sc, AR5K_MODE_11A); @@ -813,27 +854,6 @@ ath5k_ieee2mhz(short chan) } static unsigned int -ath5k_copy_rates(struct ieee80211_rate *rates, - const struct ath5k_rate_table *rt, - unsigned int max) -{ - unsigned int i, count; - - if (rt == NULL) - return 0; - - for (i = 0, count = 0; i < rt->rate_count && max > 0; i++) { - rates[count].bitrate = rt->rates[i].rate_kbps / 100; - rates[count].hw_value = rt->rates[i].rate_code; - rates[count].flags = rt->rates[i].modulation; - count++; - max--; - } - - return count; -} - -static unsigned int ath5k_copy_channels(struct ath5k_hw *ah, struct ieee80211_channel *channels, unsigned int mode, @@ -895,74 +915,97 @@ ath5k_copy_channels(struct ath5k_hw *ah, return count; } +static void +ath5k_setup_rate_idx(struct ath5k_softc *sc, struct ieee80211_supported_band *b) +{ + u8 i; + + for (i = 0; i < AR5K_MAX_RATES; i++) + sc->rate_idx[b->band][i] = -1; + + for (i = 0; i < b->n_bitrates; i++) { + sc->rate_idx[b->band][b->bitrates[i].hw_value] = i; + if (b->bitrates[i].hw_value_short) + sc->rate_idx[b->band][b->bitrates[i].hw_value_short] = i; + } +} + static int -ath5k_getchannels(struct ieee80211_hw *hw) +ath5k_setup_bands(struct ieee80211_hw *hw) { struct ath5k_softc *sc = hw->priv; struct ath5k_hw *ah = sc->ah; - struct ieee80211_supported_band *sbands = sc->sbands; - const struct ath5k_rate_table *hw_rates; - unsigned int max_r, max_c, count_r, count_c; - int mode2g = AR5K_MODE_11G; + struct ieee80211_supported_band *sband; + int max_c, count_c = 0; + int i; BUILD_BUG_ON(ARRAY_SIZE(sc->sbands) < IEEE80211_NUM_BANDS); - - max_r = ARRAY_SIZE(sc->rates); max_c = ARRAY_SIZE(sc->channels); - count_r = count_c = 0; /* 2GHz band */ - if (!test_bit(AR5K_MODE_11G, sc->ah->ah_capabilities.cap_mode)) { - mode2g = AR5K_MODE_11B; - if (!test_bit(AR5K_MODE_11B, - sc->ah->ah_capabilities.cap_mode)) - mode2g = -1; - } + sband = &sc->sbands[IEEE80211_BAND_2GHZ]; + sband->band = IEEE80211_BAND_2GHZ; + sband->bitrates = &sc->rates[IEEE80211_BAND_2GHZ][0]; - if (mode2g > 0) { - struct ieee80211_supported_band *sband = - &sbands[IEEE80211_BAND_2GHZ]; + if (test_bit(AR5K_MODE_11G, sc->ah->ah_capabilities.cap_mode)) { + /* G mode */ + memcpy(sband->bitrates, &ath5k_rates[0], + sizeof(struct ieee80211_rate) * 12); + sband->n_bitrates = 12; - sband->bitrates = sc->rates; sband->channels = sc->channels; - - sband->band = IEEE80211_BAND_2GHZ; sband->n_channels = ath5k_copy_channels(ah, sband->channels, - mode2g, max_c); - - hw_rates = ath5k_hw_get_rate_table(ah, mode2g); - sband->n_bitrates = ath5k_copy_rates(sband->bitrates, - hw_rates, max_r); + AR5K_MODE_11G, max_c); + hw->wiphy->bands[IEEE80211_BAND_2GHZ] = sband; count_c = sband->n_channels; - count_r = sband->n_bitrates; + max_c -= count_c; + } else if (test_bit(AR5K_MODE_11B, sc->ah->ah_capabilities.cap_mode)) { + /* B mode */ + memcpy(sband->bitrates, &ath5k_rates[0], + sizeof(struct ieee80211_rate) * 4); + sband->n_bitrates = 4; + + /* 5211 only supports B rates and uses 4bit rate codes + * (e.g normally we have 0x1B for 1M, but on 5211 we have 0x0B) + * fix them up here: + */ + if (ah->ah_version == AR5K_AR5211) { + for (i = 0; i < 4; i++) { + sband->bitrates[i].hw_value = + sband->bitrates[i].hw_value & 0xF; + sband->bitrates[i].hw_value_short = + sband->bitrates[i].hw_value_short & 0xF; + } + } - hw->wiphy->bands[IEEE80211_BAND_2GHZ] = sband; + sband->channels = sc->channels; + sband->n_channels = ath5k_copy_channels(ah, sband->channels, + AR5K_MODE_11B, max_c); - max_r -= count_r; + hw->wiphy->bands[IEEE80211_BAND_2GHZ] = sband; + count_c = sband->n_channels; max_c -= count_c; - } + ath5k_setup_rate_idx(sc, sband); - /* 5GHz band */ - + /* 5GHz band, A mode */ if (test_bit(AR5K_MODE_11A, sc->ah->ah_capabilities.cap_mode)) { - struct ieee80211_supported_band *sband = - &sbands[IEEE80211_BAND_5GHZ]; + sband = &sc->sbands[IEEE80211_BAND_5GHZ]; + sband->band = IEEE80211_BAND_5GHZ; + sband->bitrates = &sc->rates[IEEE80211_BAND_5GHZ][0]; - sband->bitrates = &sc->rates[count_r]; - sband->channels = &sc->channels[count_c]; + memcpy(sband->bitrates, &ath5k_rates[4], + sizeof(struct ieee80211_rate) * 8); + sband->n_bitrates = 8; - sband->band = IEEE80211_BAND_5GHZ; + sband->channels = &sc->channels[count_c]; sband->n_channels = ath5k_copy_channels(ah, sband->channels, AR5K_MODE_11A, max_c); - hw_rates = ath5k_hw_get_rate_table(ah, AR5K_MODE_11A); - sband->n_bitrates = ath5k_copy_rates(sband->bitrates, - hw_rates, max_r); - hw->wiphy->bands[IEEE80211_BAND_5GHZ] = sband; } + ath5k_setup_rate_idx(sc, sband); ath5k_debug_dump_bands(sc); @@ -978,9 +1021,6 @@ ath5k_getchannels(struct ieee80211_hw *hw) static int ath5k_chan_set(struct ath5k_softc *sc, struct ieee80211_channel *chan) { - struct ath5k_hw *ah = sc->ah; - int ret; - ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "(%u MHz) -> (%u MHz)\n", sc->curchan->center_freq, chan->center_freq); @@ -996,41 +1036,7 @@ ath5k_chan_set(struct ath5k_softc *sc, struct ieee80211_channel *chan) * hardware at the new frequency, and then re-enable * the relevant bits of the h/w. */ - ath5k_hw_set_intr(ah, 0); /* disable interrupts */ - ath5k_txq_cleanup(sc); /* clear pending tx frames */ - ath5k_rx_stop(sc); /* turn off frame recv */ - ret = ath5k_hw_reset(ah, sc->opmode, sc->curchan, true); - if (ret) { - ATH5K_ERR(sc, "%s: unable to reset channel " - "(%u Mhz)\n", __func__, chan->center_freq); - return ret; - } - - ath5k_hw_set_txpower_limit(sc->ah, 0); - - /* - * Re-enable rx framework. - */ - ret = ath5k_rx_start(sc); - if (ret) { - ATH5K_ERR(sc, "%s: unable to restart recv logic\n", - __func__); - return ret; - } - - /* - * Change channels and update the h/w rate map - * if we're switching; e.g. 11a to 11b/g. - * - * XXX needed? - */ -/* ath5k_chan_change(sc, chan); */ - - ath5k_beacon_config(sc); - /* - * Re-enable interrupts. - */ - ath5k_hw_set_intr(ah, sc->imask); + return ath5k_reset(sc, true, true); } return 0; @@ -1068,75 +1074,13 @@ ath5k_mode_setup(struct ath5k_softc *sc) ATH5K_DBG(sc, ATH5K_DEBUG_MODE, "RX filter 0x%x\n", rfilt); } -/* - * Match the hw provided rate index (through descriptors) - * to an index for sc->curband->bitrates, so it can be used - * by the stack. - * - * This one is a little bit tricky but i think i'm right - * about this... - * - * We have 4 rate tables in the following order: - * XR (4 rates) - * 802.11a (8 rates) - * 802.11b (4 rates) - * 802.11g (12 rates) - * that make the hw rate table. - * - * Lets take a 5211 for example that supports a and b modes only. - * First comes the 802.11a table and then 802.11b (total 12 rates). - * When hw returns eg. 11 it points to the last 802.11b rate (11Mbit), - * if it returns 2 it points to the second 802.11a rate etc. - * - * Same goes for 5212 who has xr/a/b/g support (total 28 rates). - * First comes the XR table, then 802.11a, 802.11b and 802.11g. - * When hw returns eg. 27 it points to the last 802.11g rate (54Mbits) etc - */ -static void -ath5k_set_total_hw_rates(struct ath5k_softc *sc) { - - struct ath5k_hw *ah = sc->ah; - - if (test_bit(AR5K_MODE_11A, ah->ah_modes)) - sc->a_rates = 8; - - if (test_bit(AR5K_MODE_11B, ah->ah_modes)) - sc->b_rates = 4; - - if (test_bit(AR5K_MODE_11G, ah->ah_modes)) - sc->g_rates = 12; - - /* XXX: Need to see what what happens when - xr disable bits in eeprom are set */ - if (ah->ah_version >= AR5K_AR5212) - sc->xr_rates = 4; - -} - static inline int -ath5k_hw_to_driver_rix(struct ath5k_softc *sc, int hw_rix) { - - int mac80211_rix; - - if(sc->curband->band == IEEE80211_BAND_2GHZ) { - /* We setup a g ratetable for both b/g modes */ - mac80211_rix = - hw_rix - sc->b_rates - sc->a_rates - sc->xr_rates; - } else { - mac80211_rix = hw_rix - sc->xr_rates; - } - - /* Something went wrong, fallback to basic rate for this band */ - if ((mac80211_rix >= sc->curband->n_bitrates) || - (mac80211_rix <= 0 )) - mac80211_rix = 1; - - return mac80211_rix; +ath5k_hw_to_driver_rix(struct ath5k_softc *sc, int hw_rix) +{ + WARN_ON(hw_rix < 0 || hw_rix > AR5K_MAX_RATES); + return sc->rate_idx[sc->curband->band][hw_rix]; } - - - /***************\ * Buffers setup * \***************/ @@ -1199,7 +1143,7 @@ ath5k_rxbuf_setup(struct ath5k_softc *sc, struct ath5k_buf *bf) ds = bf->desc; ds->ds_link = bf->daddr; /* link to self */ ds->ds_data = bf->skbaddr; - ath5k_hw_setup_rx_desc(ah, ds, + ah->ah_setup_rx_desc(ah, ds, skb_tailroom(skb), /* buffer size */ 0); @@ -1250,12 +1194,12 @@ ath5k_txbuf_setup(struct ath5k_softc *sc, struct ath5k_buf *bf) list_add_tail(&bf->list, &txq->q); sc->tx_stats[txq->qnum].len++; if (txq->link == NULL) /* is this first packet? */ - ath5k_hw_put_tx_buf(ah, txq->qnum, bf->daddr); + ath5k_hw_set_txdp(ah, txq->qnum, bf->daddr); else /* no, so only link it */ *txq->link = bf->daddr; txq->link = &ds->ds_link; - ath5k_hw_tx_start(ah, txq->qnum); + ath5k_hw_start_tx_dma(ah, txq->qnum); mmiowb(); spin_unlock_bh(&txq->lock); @@ -1433,7 +1377,8 @@ ath5k_beaconq_config(struct ath5k_softc *sc) ret = ath5k_hw_get_tx_queueprops(ah, sc->bhalq, &qi); if (ret) return ret; - if (sc->opmode == IEEE80211_IF_TYPE_AP) { + if (sc->opmode == IEEE80211_IF_TYPE_AP || + sc->opmode == IEEE80211_IF_TYPE_MESH_POINT) { /* * Always burst out beacon and CAB traffic * (aifs = cwmin = cwmax = 0) @@ -1454,7 +1399,7 @@ ath5k_beaconq_config(struct ath5k_softc *sc) "beacon queueprops tqi_aifs:%d tqi_cw_min:%d tqi_cw_max:%d\n", qi.tqi_aifs, qi.tqi_cw_min, qi.tqi_cw_max); - ret = ath5k_hw_setup_tx_queueprops(ah, sc->bhalq, &qi); + ret = ath5k_hw_set_tx_queueprops(ah, sc->bhalq, &qi); if (ret) { ATH5K_ERR(sc, "%s: unable to update parameters for beacon " "hardware queue!\n", __func__); @@ -1503,14 +1448,14 @@ ath5k_txq_cleanup(struct ath5k_softc *sc) /* don't touch the hardware if marked invalid */ ath5k_hw_stop_tx_dma(ah, sc->bhalq); ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "beacon queue %x\n", - ath5k_hw_get_tx_buf(ah, sc->bhalq)); + ath5k_hw_get_txdp(ah, sc->bhalq)); for (i = 0; i < ARRAY_SIZE(sc->txqs); i++) if (sc->txqs[i].setup) { ath5k_hw_stop_tx_dma(ah, sc->txqs[i].qnum); ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "txq [%u] %x, " "link %p\n", sc->txqs[i].qnum, - ath5k_hw_get_tx_buf(ah, + ath5k_hw_get_txdp(ah, sc->txqs[i].qnum), sc->txqs[i].link); } @@ -1570,8 +1515,8 @@ ath5k_rx_start(struct ath5k_softc *sc) bf = list_first_entry(&sc->rxbuf, struct ath5k_buf, list); spin_unlock_bh(&sc->rxbuflock); - ath5k_hw_put_rx_buf(ah, bf->daddr); - ath5k_hw_start_rx(ah); /* enable recv descriptors */ + ath5k_hw_set_rxdp(ah, bf->daddr); + ath5k_hw_start_rx_dma(ah); /* enable recv descriptors */ ath5k_mode_setup(sc); /* set filters, etc. */ ath5k_hw_start_rx_pcu(ah); /* re-enable PCU/DMA engine */ @@ -1588,7 +1533,7 @@ ath5k_rx_stop(struct ath5k_softc *sc) { struct ath5k_hw *ah = sc->ah; - ath5k_hw_stop_pcu_recv(ah); /* disable PCU */ + ath5k_hw_stop_rx_pcu(ah); /* disable PCU */ ath5k_hw_set_rx_filter(ah, 0); /* clear recv filter */ ath5k_hw_stop_rx_dma(ah); /* disable DMA engine */ @@ -1602,7 +1547,7 @@ ath5k_rx_decrypted(struct ath5k_softc *sc, struct ath5k_desc *ds, struct sk_buff *skb, struct ath5k_rx_status *rs) { struct ieee80211_hdr *hdr = (void *)skb->data; - unsigned int keyix, hlen = ieee80211_get_hdrlen_from_skb(skb); + unsigned int keyix, hlen; if (!(rs->rs_status & AR5K_RXERR_DECRYPT) && rs->rs_keyix != AR5K_RXKEYIX_INVALID) @@ -1611,6 +1556,7 @@ ath5k_rx_decrypted(struct ath5k_softc *sc, struct ath5k_desc *ds, /* Apparently when a default key is used to decrypt the packet the hw does not set the index used to decrypt. In such cases get the index from the packet. */ + hlen = ieee80211_hdrlen(hdr->frame_control); if (ieee80211_has_protected(hdr->frame_control) && !(rs->rs_status & AR5K_RXERR_DECRYPT) && skb->len >= hlen + 4) { @@ -1824,6 +1770,10 @@ accept: rxs.rate_idx = ath5k_hw_to_driver_rix(sc, rs.rs_rate); rxs.flag |= ath5k_rx_decrypted(sc, ds, skb, &rs); + if (rxs.rate_idx >= 0 && rs.rs_rate == + sc->curband->bitrates[rxs.rate_idx].hw_value_short) + rxs.flag |= RX_FLAG_SHORTPRE; + ath5k_debug_dump_skb(sc, skb, "RX ", 0); /* check beacons in IBSS mode */ @@ -2032,8 +1982,8 @@ ath5k_beacon_send(struct ath5k_softc *sc) /* NB: hw still stops DMA, so proceed */ } - ath5k_hw_put_tx_buf(ah, sc->bhalq, bf->daddr); - ath5k_hw_tx_start(ah, sc->bhalq); + ath5k_hw_set_txdp(ah, sc->bhalq, bf->daddr); + ath5k_hw_start_tx_dma(ah, sc->bhalq); ATH5K_DBG(sc, ATH5K_DEBUG_BEACON, "TXDP[%u] = %llx (%p)\n", sc->bhalq, (unsigned long long)bf->daddr, bf->desc); @@ -2162,7 +2112,7 @@ ath5k_beacon_config(struct ath5k_softc *sc) { struct ath5k_hw *ah = sc->ah; - ath5k_hw_set_intr(ah, 0); + ath5k_hw_set_imr(ah, 0); sc->bmisscount = 0; sc->imask &= ~(AR5K_INT_BMISS | AR5K_INT_SWBA); @@ -2188,7 +2138,7 @@ ath5k_beacon_config(struct ath5k_softc *sc) } /* TODO else AP */ - ath5k_hw_set_intr(ah, sc->imask); + ath5k_hw_set_imr(ah, sc->imask); } @@ -2220,36 +2170,13 @@ ath5k_init(struct ath5k_softc *sc) */ sc->curchan = sc->hw->conf.channel; sc->curband = &sc->sbands[sc->curchan->band]; - ret = ath5k_hw_reset(sc->ah, sc->opmode, sc->curchan, false); - if (ret) { - ATH5K_ERR(sc, "unable to reset hardware: %d\n", ret); - goto done; - } - /* - * This is needed only to setup initial state - * but it's best done after a reset. - */ - ath5k_hw_set_txpower_limit(sc->ah, 0); - - /* - * Setup the hardware after reset: the key cache - * is filled as needed and the receive engine is - * set going. Frame transmit is handled entirely - * in the frame output path; there's nothing to do - * here except setup the interrupt mask. - */ - ret = ath5k_rx_start(sc); - if (ret) - goto done; - - /* - * Enable interrupts. - */ sc->imask = AR5K_INT_RX | AR5K_INT_TX | AR5K_INT_RXEOL | AR5K_INT_RXORN | AR5K_INT_FATAL | AR5K_INT_GLOBAL | AR5K_INT_MIB; + ret = ath5k_reset(sc, false, false); + if (ret) + goto done; - ath5k_hw_set_intr(sc->ah, sc->imask); /* Set ack to be sent at low bit-rates */ ath5k_hw_set_ack_bitrate_high(sc->ah, false); @@ -2290,7 +2217,7 @@ ath5k_stop_locked(struct ath5k_softc *sc) if (!test_bit(ATH_STAT_INVALID, sc->status)) { ath5k_led_off(sc); - ath5k_hw_set_intr(ah, 0); + ath5k_hw_set_imr(ah, 0); synchronize_irq(sc->pdev->irq); } ath5k_txq_cleanup(sc); @@ -2451,7 +2378,7 @@ ath5k_tasklet_reset(unsigned long data) { struct ath5k_softc *sc = (void *)data; - ath5k_reset(sc->hw); + ath5k_reset_wake(sc); } /* @@ -2474,7 +2401,7 @@ ath5k_calibrate(unsigned long data) * to load new gain values. */ ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "calibration, resetting\n"); - ath5k_reset(sc->hw); + ath5k_reset_wake(sc); } if (ath5k_hw_phy_calibrate(ah, sc->curchan)) ATH5K_ERR(sc, "calibration of channel %u failed\n", @@ -2675,48 +2602,67 @@ ath5k_tx(struct ieee80211_hw *hw, struct sk_buff *skb) } static int -ath5k_reset(struct ieee80211_hw *hw) +ath5k_reset(struct ath5k_softc *sc, bool stop, bool change_channel) { - struct ath5k_softc *sc = hw->priv; struct ath5k_hw *ah = sc->ah; int ret; ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "resetting\n"); - ath5k_hw_set_intr(ah, 0); - ath5k_txq_cleanup(sc); - ath5k_rx_stop(sc); - + if (stop) { + ath5k_hw_set_imr(ah, 0); + ath5k_txq_cleanup(sc); + ath5k_rx_stop(sc); + } ret = ath5k_hw_reset(ah, sc->opmode, sc->curchan, true); - if (unlikely(ret)) { + if (ret) { ATH5K_ERR(sc, "can't reset hardware (%d)\n", ret); goto err; } + + /* + * This is needed only to setup initial state + * but it's best done after a reset. + */ ath5k_hw_set_txpower_limit(sc->ah, 0); ret = ath5k_rx_start(sc); - if (unlikely(ret)) { + if (ret) { ATH5K_ERR(sc, "can't start recv logic\n"); goto err; } + /* - * We may be doing a reset in response to an ioctl - * that changes the channel so update any state that - * might change as a result. + * Change channels and update the h/w rate map if we're switching; + * e.g. 11a to 11b/g. + * + * We may be doing a reset in response to an ioctl that changes the + * channel so update any state that might change as a result. * * XXX needed? */ /* ath5k_chan_change(sc, c); */ - ath5k_beacon_config(sc); - /* intrs are started by ath5k_beacon_config */ - ieee80211_wake_queues(hw); + ath5k_beacon_config(sc); + /* intrs are enabled by ath5k_beacon_config */ return 0; err: return ret; } +static int +ath5k_reset_wake(struct ath5k_softc *sc) +{ + int ret; + + ret = ath5k_reset(sc, true, true); + if (!ret) + ieee80211_wake_queues(sc->hw); + + return ret; +} + static int ath5k_start(struct ieee80211_hw *hw) { return ath5k_init(hw->priv); @@ -2827,7 +2773,7 @@ ath5k_config_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif, mutex_unlock(&sc->lock); - return ath5k_reset(hw); + return ath5k_reset_wake(sc); unlock: mutex_unlock(&sc->lock); return ret; @@ -2940,6 +2886,7 @@ static void ath5k_configure_filter(struct ieee80211_hw *hw, if (sc->opmode != IEEE80211_IF_TYPE_STA) rfilt |= AR5K_RX_FILTER_PROBEREQ; if (sc->opmode != IEEE80211_IF_TYPE_AP && + sc->opmode != IEEE80211_IF_TYPE_MESH_POINT && test_bit(ATH_STAT_PROMISC, sc->status)) rfilt |= AR5K_RX_FILTER_PROM; if (sc->opmode == IEEE80211_IF_TYPE_STA || diff --git a/drivers/net/wireless/ath5k/base.h b/drivers/net/wireless/ath5k/base.h index 7ec2f377d5c..1549b63d613 100644 --- a/drivers/net/wireless/ath5k/base.h +++ b/drivers/net/wireless/ath5k/base.h @@ -111,17 +111,13 @@ struct ath5k_softc { struct ieee80211_hw *hw; /* IEEE 802.11 common */ struct ieee80211_supported_band sbands[IEEE80211_NUM_BANDS]; struct ieee80211_channel channels[ATH_CHAN_MAX]; - struct ieee80211_rate rates[AR5K_MAX_RATES * IEEE80211_NUM_BANDS]; + struct ieee80211_rate rates[IEEE80211_NUM_BANDS][AR5K_MAX_RATES]; + u8 rate_idx[IEEE80211_NUM_BANDS][AR5K_MAX_RATES]; enum ieee80211_if_types opmode; struct ath5k_hw *ah; /* Atheros HW */ struct ieee80211_supported_band *curband; - u8 a_rates; - u8 b_rates; - u8 g_rates; - u8 xr_rates; - #ifdef CONFIG_ATH5K_DEBUG struct ath5k_dbg_info debug; /* debug info */ #endif /* CONFIG_ATH5K_DEBUG */ diff --git a/drivers/net/wireless/ath5k/caps.c b/drivers/net/wireless/ath5k/caps.c new file mode 100644 index 00000000000..150f5ed204a --- /dev/null +++ b/drivers/net/wireless/ath5k/caps.c @@ -0,0 +1,193 @@ +/* + * Copyright (c) 2004-2008 Reyk Floeter <reyk@openbsd.org> + * Copyright (c) 2006-2008 Nick Kossifidis <mickflemm@gmail.com> + * Copyright (c) 2007-2008 Jiri Slaby <jirislaby@gmail.com> + * + * Permission to use, copy, modify, and distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * + */ + +/**************\ +* Capabilities * +\**************/ + +#include "ath5k.h" +#include "reg.h" +#include "debug.h" +#include "base.h" + +/* + * Fill the capabilities struct + * TODO: Merge this with EEPROM code when we are done with it + */ +int ath5k_hw_set_capabilities(struct ath5k_hw *ah) +{ + u16 ee_header; + + ATH5K_TRACE(ah->ah_sc); + /* Capabilities stored in the EEPROM */ + ee_header = ah->ah_capabilities.cap_eeprom.ee_header; + + if (ah->ah_version == AR5K_AR5210) { + /* + * Set radio capabilities + * (The AR5110 only supports the middle 5GHz band) + */ + ah->ah_capabilities.cap_range.range_5ghz_min = 5120; + ah->ah_capabilities.cap_range.range_5ghz_max = 5430; + ah->ah_capabilities.cap_range.range_2ghz_min = 0; + ah->ah_capabilities.cap_range.range_2ghz_max = 0; + + /* Set supported modes */ + __set_bit(AR5K_MODE_11A, ah->ah_capabilities.cap_mode); + __set_bit(AR5K_MODE_11A_TURBO, ah->ah_capabilities.cap_mode); + } else { + /* + * XXX The tranceiver supports frequencies from 4920 to 6100GHz + * XXX and from 2312 to 2732GHz. There are problems with the + * XXX current ieee80211 implementation because the IEEE + * XXX channel mapping does not support negative channel + * XXX numbers (2312MHz is channel -19). Of course, this + * XXX doesn't matter because these channels are out of range + * XXX but some regulation domains like MKK (Japan) will + * XXX support frequencies somewhere around 4.8GHz. + */ + + /* + * Set radio capabilities + */ + + if (AR5K_EEPROM_HDR_11A(ee_header)) { + /* 4920 */ + ah->ah_capabilities.cap_range.range_5ghz_min = 5005; + ah->ah_capabilities.cap_range.range_5ghz_max = 6100; + + /* Set supported modes */ + __set_bit(AR5K_MODE_11A, + ah->ah_capabilities.cap_mode); + __set_bit(AR5K_MODE_11A_TURBO, + ah->ah_capabilities.cap_mode); + if (ah->ah_version == AR5K_AR5212) + __set_bit(AR5K_MODE_11G_TURBO, + ah->ah_capabilities.cap_mode); + } + + /* Enable 802.11b if a 2GHz capable radio (2111/5112) is + * connected */ + if (AR5K_EEPROM_HDR_11B(ee_header) || + AR5K_EEPROM_HDR_11G(ee_header)) { + /* 2312 */ + ah->ah_capabilities.cap_range.range_2ghz_min = 2412; + ah->ah_capabilities.cap_range.range_2ghz_max = 2732; + + if (AR5K_EEPROM_HDR_11B(ee_header)) + __set_bit(AR5K_MODE_11B, + ah->ah_capabilities.cap_mode); + + if (AR5K_EEPROM_HDR_11G(ee_header)) + __set_bit(AR5K_MODE_11G, + ah->ah_capabilities.cap_mode); + } + } + + /* GPIO */ + ah->ah_gpio_npins = AR5K_NUM_GPIO; + + /* Set number of supported TX queues */ + if (ah->ah_version == AR5K_AR5210) + ah->ah_capabilities.cap_queues.q_tx_num = + AR5K_NUM_TX_QUEUES_NOQCU; + else + ah->ah_capabilities.cap_queues.q_tx_num = AR5K_NUM_TX_QUEUES; + + return 0; +} + +/* Main function used by the driver part to check caps */ +int ath5k_hw_get_capability(struct ath5k_hw *ah, + enum ath5k_capability_type cap_type, + u32 capability, u32 *result) +{ + ATH5K_TRACE(ah->ah_sc); + + switch (cap_type) { + case AR5K_CAP_NUM_TXQUEUES: + if (result) { + if (ah->ah_version == AR5K_AR5210) + *result = AR5K_NUM_TX_QUEUES_NOQCU; + else + *result = AR5K_NUM_TX_QUEUES; + goto yes; + } + case AR5K_CAP_VEOL: + goto yes; + case AR5K_CAP_COMPRESSION: + if (ah->ah_version == AR5K_AR5212) + goto yes; + else + goto no; + case AR5K_CAP_BURST: + goto yes; + case AR5K_CAP_TPC: + goto yes; + case AR5K_CAP_BSSIDMASK: + if (ah->ah_version == AR5K_AR5212) + goto yes; + else + goto no; + case AR5K_CAP_XR: + if (ah->ah_version == AR5K_AR5212) + goto yes; + else + goto no; + default: + goto no; + } + +no: + return -EINVAL; +yes: + return 0; +} + +/* + * TODO: Following functions should be part of a new function + * set_capability + */ + +int ath5k_hw_enable_pspoll(struct ath5k_hw *ah, u8 *bssid, + u16 assoc_id) +{ + ATH5K_TRACE(ah->ah_sc); + + if (ah->ah_version == AR5K_AR5210) { + AR5K_REG_DISABLE_BITS(ah, AR5K_STA_ID1, + AR5K_STA_ID1_NO_PSPOLL | AR5K_STA_ID1_DEFAULT_ANTENNA); + return 0; + } + + return -EIO; +} + +int ath5k_hw_disable_pspoll(struct ath5k_hw *ah) +{ + ATH5K_TRACE(ah->ah_sc); + + if (ah->ah_version == AR5K_AR5210) { + AR5K_REG_ENABLE_BITS(ah, AR5K_STA_ID1, + AR5K_STA_ID1_NO_PSPOLL | AR5K_STA_ID1_DEFAULT_ANTENNA); + return 0; + } + + return -EIO; +} diff --git a/drivers/net/wireless/ath5k/debug.c b/drivers/net/wireless/ath5k/debug.c index 6fa6c8e04ff..8f92d670f61 100644 --- a/drivers/net/wireless/ath5k/debug.c +++ b/drivers/net/wireless/ath5k/debug.c @@ -58,8 +58,8 @@ * THE POSSIBILITY OF SUCH DAMAGES. */ -#include "debug.h" #include "base.h" +#include "debug.h" static unsigned int ath5k_debug; module_param_named(debug, ath5k_debug, uint, 0); @@ -525,7 +525,7 @@ ath5k_debug_printrxbuffs(struct ath5k_softc *sc, struct ath5k_hw *ah) return; printk(KERN_DEBUG "rx queue %x, link %p\n", - ath5k_hw_get_rx_buf(ah), sc->rxlink); + ath5k_hw_get_rxdp(ah), sc->rxlink); spin_lock_bh(&sc->rxbuflock); list_for_each_entry(bf, &sc->rxbuf, list) { diff --git a/drivers/net/wireless/ath5k/desc.c b/drivers/net/wireless/ath5k/desc.c new file mode 100644 index 00000000000..d45b90a6e06 --- /dev/null +++ b/drivers/net/wireless/ath5k/desc.c @@ -0,0 +1,667 @@ +/* + * Copyright (c) 2004-2008 Reyk Floeter <reyk@openbsd.org> + * Copyright (c) 2006-2008 Nick Kossifidis <mickflemm@gmail.com> + * Copyright (c) 2007-2008 Pavel Roskin <proski@gnu.org> + * + * Permission to use, copy, modify, and distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * + */ + +/******************************\ + Hardware Descriptor Functions +\******************************/ + +#include "ath5k.h" +#include "reg.h" +#include "debug.h" +#include "base.h" + +/* + * TX Descriptors + */ + +/* + * Initialize the 2-word tx control descriptor on 5210/5211 + */ +static int +ath5k_hw_setup_2word_tx_desc(struct ath5k_hw *ah, struct ath5k_desc *desc, + unsigned int pkt_len, unsigned int hdr_len, enum ath5k_pkt_type type, + unsigned int tx_power, unsigned int tx_rate0, unsigned int tx_tries0, + unsigned int key_index, unsigned int antenna_mode, unsigned int flags, + unsigned int rtscts_rate, unsigned int rtscts_duration) +{ + u32 frame_type; + struct ath5k_hw_2w_tx_ctl *tx_ctl; + unsigned int frame_len; + + tx_ctl = &desc->ud.ds_tx5210.tx_ctl; + + /* + * Validate input + * - Zero retries don't make sense. + * - A zero rate will put the HW into a mode where it continously sends + * noise on the channel, so it is important to avoid this. + */ + if (unlikely(tx_tries0 == 0)) { + ATH5K_ERR(ah->ah_sc, "zero retries\n"); + WARN_ON(1); + return -EINVAL; + } + if (unlikely(tx_rate0 == 0)) { + ATH5K_ERR(ah->ah_sc, "zero rate\n"); + WARN_ON(1); + return -EINVAL; + } + + /* Clear descriptor */ + memset(&desc->ud.ds_tx5210, 0, sizeof(struct ath5k_hw_5210_tx_desc)); + + /* Setup control descriptor */ + + /* Verify and set frame length */ + + /* remove padding we might have added before */ + frame_len = pkt_len - (hdr_len & 3) + FCS_LEN; + + if (frame_len & ~AR5K_2W_TX_DESC_CTL0_FRAME_LEN) + return -EINVAL; + + tx_ctl->tx_control_0 = frame_len & AR5K_2W_TX_DESC_CTL0_FRAME_LEN; + + /* Verify and set buffer length */ + + /* NB: beacon's BufLen must be a multiple of 4 bytes */ + if (type == AR5K_PKT_TYPE_BEACON) + pkt_len = roundup(pkt_len, 4); + + if (pkt_len & ~AR5K_2W_TX_DESC_CTL1_BUF_LEN) + return -EINVAL; + + tx_ctl->tx_control_1 = pkt_len & AR5K_2W_TX_DESC_CTL1_BUF_LEN; + + /* + * Verify and set header length + * XXX: I only found that on 5210 code, does it work on 5211 ? + */ + if (ah->ah_version == AR5K_AR5210) { + if (hdr_len & ~AR5K_2W_TX_DESC_CTL0_HEADER_LEN) + return -EINVAL; + tx_ctl->tx_control_0 |= + AR5K_REG_SM(hdr_len, AR5K_2W_TX_DESC_CTL0_HEADER_LEN); + } + + /*Diferences between 5210-5211*/ + if (ah->ah_version == AR5K_AR5210) { + switch (type) { + case AR5K_PKT_TYPE_BEACON: + case AR5K_PKT_TYPE_PROBE_RESP: + frame_type = AR5K_AR5210_TX_DESC_FRAME_TYPE_NO_DELAY; + case AR5K_PKT_TYPE_PIFS: + frame_type = AR5K_AR5210_TX_DESC_FRAME_TYPE_PIFS; + default: + frame_type = type /*<< 2 ?*/; + } + + tx_ctl->tx_control_0 |= + AR5K_REG_SM(frame_type, AR5K_2W_TX_DESC_CTL0_FRAME_TYPE) | + AR5K_REG_SM(tx_rate0, AR5K_2W_TX_DESC_CTL0_XMIT_RATE); + + } else { + tx_ctl->tx_control_0 |= + AR5K_REG_SM(tx_rate0, AR5K_2W_TX_DESC_CTL0_XMIT_RATE) | + AR5K_REG_SM(antenna_mode, + AR5K_2W_TX_DESC_CTL0_ANT_MODE_XMIT); + tx_ctl->tx_control_1 |= + AR5K_REG_SM(type, AR5K_2W_TX_DESC_CTL1_FRAME_TYPE); + } +#define _TX_FLAGS(_c, _flag) \ + if (flags & AR5K_TXDESC_##_flag) { \ + tx_ctl->tx_control_##_c |= \ + AR5K_2W_TX_DESC_CTL##_c##_##_flag; \ + } + + _TX_FLAGS(0, CLRDMASK); + _TX_FLAGS(0, VEOL); + _TX_FLAGS(0, INTREQ); + _TX_FLAGS(0, RTSENA); + _TX_FLAGS(1, NOACK); + +#undef _TX_FLAGS + + /* + * WEP crap + */ + if (key_index != AR5K_TXKEYIX_INVALID) { + tx_ctl->tx_control_0 |= + AR5K_2W_TX_DESC_CTL0_ENCRYPT_KEY_VALID; + tx_ctl->tx_control_1 |= + AR5K_REG_SM(key_index, + AR5K_2W_TX_DESC_CTL1_ENCRYPT_KEY_INDEX); + } + + /* + * RTS/CTS Duration [5210 ?] + */ + if ((ah->ah_version == AR5K_AR5210) && + (flags & (AR5K_TXDESC_RTSENA | AR5K_TXDESC_CTSENA))) + tx_ctl->tx_control_1 |= rtscts_duration & + AR5K_2W_TX_DESC_CTL1_RTS_DURATION; + + return 0; +} + +/* + * Initialize the 4-word tx control descriptor on 5212 + */ +static int ath5k_hw_setup_4word_tx_desc(struct ath5k_hw *ah, + struct ath5k_desc *desc, unsigned int pkt_len, unsigned int hdr_len, + enum ath5k_pkt_type type, unsigned int tx_power, unsigned int tx_rate0, + unsigned int tx_tries0, unsigned int key_index, + unsigned int antenna_mode, unsigned int flags, + unsigned int rtscts_rate, + unsigned int rtscts_duration) +{ + struct ath5k_hw_4w_tx_ctl *tx_ctl; + unsigned int frame_len; + + ATH5K_TRACE(ah->ah_sc); + tx_ctl = &desc->ud.ds_tx5212.tx_ctl; + + /* + * Validate input + * - Zero retries don't make sense. + * - A zero rate will put the HW into a mode where it continously sends + * noise on the channel, so it is important to avoid this. + */ + if (unlikely(tx_tries0 == 0)) { + ATH5K_ERR(ah->ah_sc, "zero retries\n"); + WARN_ON(1); + return -EINVAL; + } + if (unlikely(tx_rate0 == 0)) { + ATH5K_ERR(ah->ah_sc, "zero rate\n"); + WARN_ON(1); + return -EINVAL; + } + + /* Clear descriptor */ + memset(&desc->ud.ds_tx5212, 0, sizeof(struct ath5k_hw_5212_tx_desc)); + + /* Setup control descriptor */ + + /* Verify and set frame length */ + + /* remove padding we might have added before */ + frame_len = pkt_len - (hdr_len & 3) + FCS_LEN; + + if (frame_len & ~AR5K_4W_TX_DESC_CTL0_FRAME_LEN) + return -EINVAL; + + tx_ctl->tx_control_0 = frame_len & AR5K_4W_TX_DESC_CTL0_FRAME_LEN; + + /* Verify and set buffer length */ + + /* NB: beacon's BufLen must be a multiple of 4 bytes */ + if (type == AR5K_PKT_TYPE_BEACON) + pkt_len = roundup(pkt_len, 4); + + if (pkt_len & ~AR5K_4W_TX_DESC_CTL1_BUF_LEN) + return -EINVAL; + + tx_ctl->tx_control_1 = pkt_len & AR5K_4W_TX_DESC_CTL1_BUF_LEN; + + tx_ctl->tx_control_0 |= + AR5K_REG_SM(tx_power, AR5K_4W_TX_DESC_CTL0_XMIT_POWER) | + AR5K_REG_SM(antenna_mode, AR5K_4W_TX_DESC_CTL0_ANT_MODE_XMIT); + tx_ctl->tx_control_1 |= AR5K_REG_SM(type, + AR5K_4W_TX_DESC_CTL1_FRAME_TYPE); + tx_ctl->tx_control_2 = AR5K_REG_SM(tx_tries0 + AR5K_TUNE_HWTXTRIES, + AR5K_4W_TX_DESC_CTL2_XMIT_TRIES0); + tx_ctl->tx_control_3 = tx_rate0 & AR5K_4W_TX_DESC_CTL3_XMIT_RATE0; + +#define _TX_FLAGS(_c, _flag) \ + if (flags & AR5K_TXDESC_##_flag) { \ + tx_ctl->tx_control_##_c |= \ + AR5K_4W_TX_DESC_CTL##_c##_##_flag; \ + } + + _TX_FLAGS(0, CLRDMASK); + _TX_FLAGS(0, VEOL); + _TX_FLAGS(0, INTREQ); + _TX_FLAGS(0, RTSENA); + _TX_FLAGS(0, CTSENA); + _TX_FLAGS(1, NOACK); + +#undef _TX_FLAGS + + /* + * WEP crap + */ + if (key_index != AR5K_TXKEYIX_INVALID) { + tx_ctl->tx_control_0 |= AR5K_4W_TX_DESC_CTL0_ENCRYPT_KEY_VALID; + tx_ctl->tx_control_1 |= AR5K_REG_SM(key_index, + AR5K_4W_TX_DESC_CTL1_ENCRYPT_KEY_INDEX); + } + + /* + * RTS/CTS + */ + if (flags & (AR5K_TXDESC_RTSENA | AR5K_TXDESC_CTSENA)) { + if ((flags & AR5K_TXDESC_RTSENA) && + (flags & AR5K_TXDESC_CTSENA)) + return -EINVAL; + tx_ctl->tx_control_2 |= rtscts_duration & + AR5K_4W_TX_DESC_CTL2_RTS_DURATION; + tx_ctl->tx_control_3 |= AR5K_REG_SM(rtscts_rate, + AR5K_4W_TX_DESC_CTL3_RTS_CTS_RATE); + } + + return 0; +} + +/* + * Initialize a 4-word multi rate retry tx control descriptor on 5212 + */ +static int +ath5k_hw_setup_mrr_tx_desc(struct ath5k_hw *ah, struct ath5k_desc *desc, + unsigned int tx_rate1, u_int tx_tries1, u_int tx_rate2, + u_int tx_tries2, unsigned int tx_rate3, u_int tx_tries3) +{ + struct ath5k_hw_4w_tx_ctl *tx_ctl; + + /* + * Rates can be 0 as long as the retry count is 0 too. + * A zero rate and nonzero retry count will put the HW into a mode where + * it continously sends noise on the channel, so it is important to + * avoid this. + */ + if (unlikely((tx_rate1 == 0 && tx_tries1 != 0) || + (tx_rate2 == 0 && tx_tries2 != 0) || + (tx_rate3 == 0 && tx_tries3 != 0))) { + ATH5K_ERR(ah->ah_sc, "zero rate\n"); + WARN_ON(1); + return -EINVAL; + } + + if (ah->ah_version == AR5K_AR5212) { + tx_ctl = &desc->ud.ds_tx5212.tx_ctl; + +#define _XTX_TRIES(_n) \ + if (tx_tries##_n) { \ + tx_ctl->tx_control_2 |= \ + AR5K_REG_SM(tx_tries##_n, \ + AR5K_4W_TX_DESC_CTL2_XMIT_TRIES##_n); \ + tx_ctl->tx_control_3 |= \ + AR5K_REG_SM(tx_rate##_n, \ + AR5K_4W_TX_DESC_CTL3_XMIT_RATE##_n); \ + } + + _XTX_TRIES(1); + _XTX_TRIES(2); + _XTX_TRIES(3); + +#undef _XTX_TRIES + + return 1; + } + + return 0; +} + +/* + * Proccess the tx status descriptor on 5210/5211 + */ +static int ath5k_hw_proc_2word_tx_status(struct ath5k_hw *ah, + struct ath5k_desc *desc, struct ath5k_tx_status *ts) +{ + struct ath5k_hw_2w_tx_ctl *tx_ctl; + struct ath5k_hw_tx_status *tx_status; + + ATH5K_TRACE(ah->ah_sc); + + tx_ctl = &desc->ud.ds_tx5210.tx_ctl; + tx_status = &desc->ud.ds_tx5210.tx_stat; + + /* No frame has been send or error */ + if (unlikely((tx_status->tx_status_1 & AR5K_DESC_TX_STATUS1_DONE) == 0)) + return -EINPROGRESS; + + /* + * Get descriptor status + */ + ts->ts_tstamp = AR5K_REG_MS(tx_status->tx_status_0, + AR5K_DESC_TX_STATUS0_SEND_TIMESTAMP); + ts->ts_shortretry = AR5K_REG_MS(tx_status->tx_status_0, + AR5K_DESC_TX_STATUS0_SHORT_RETRY_COUNT); + ts->ts_longretry = AR5K_REG_MS(tx_status->tx_status_0, + AR5K_DESC_TX_STATUS0_LONG_RETRY_COUNT); + /*TODO: ts->ts_virtcol + test*/ + ts->ts_seqnum = AR5K_REG_MS(tx_status->tx_status_1, + AR5K_DESC_TX_STATUS1_SEQ_NUM); + ts->ts_rssi = AR5K_REG_MS(tx_status->tx_status_1, + AR5K_DESC_TX_STATUS1_ACK_SIG_STRENGTH); + ts->ts_antenna = 1; + ts->ts_status = 0; + ts->ts_rate = AR5K_REG_MS(tx_ctl->tx_control_0, + AR5K_2W_TX_DESC_CTL0_XMIT_RATE); + + if (!(tx_status->tx_status_0 & AR5K_DESC_TX_STATUS0_FRAME_XMIT_OK)) { + if (tx_status->tx_status_0 & + AR5K_DESC_TX_STATUS0_EXCESSIVE_RETRIES) + ts->ts_status |= AR5K_TXERR_XRETRY; + + if (tx_status->tx_status_0 & AR5K_DESC_TX_STATUS0_FIFO_UNDERRUN) + ts->ts_status |= AR5K_TXERR_FIFO; + + if (tx_status->tx_status_0 & AR5K_DESC_TX_STATUS0_FILTERED) + ts->ts_status |= AR5K_TXERR_FILT; + } + + return 0; +} + +/* + * Proccess a tx status descriptor on 5212 + */ +static int ath5k_hw_proc_4word_tx_status(struct ath5k_hw *ah, + struct ath5k_desc *desc, struct ath5k_tx_status *ts) +{ + struct ath5k_hw_4w_tx_ctl *tx_ctl; + struct ath5k_hw_tx_status *tx_status; + + ATH5K_TRACE(ah->ah_sc); + + tx_ctl = &desc->ud.ds_tx5212.tx_ctl; + tx_status = &desc->ud.ds_tx5212.tx_stat; + + /* No frame has been send or error */ + if (unlikely(!(tx_status->tx_status_1 & AR5K_DESC_TX_STATUS1_DONE))) + return -EINPROGRESS; + + /* + * Get descriptor status + */ + ts->ts_tstamp = AR5K_REG_MS(tx_status->tx_status_0, + AR5K_DESC_TX_STATUS0_SEND_TIMESTAMP); + ts->ts_shortretry = AR5K_REG_MS(tx_status->tx_status_0, + AR5K_DESC_TX_STATUS0_SHORT_RETRY_COUNT); + ts->ts_longretry = AR5K_REG_MS(tx_status->tx_status_0, + AR5K_DESC_TX_STATUS0_LONG_RETRY_COUNT); + ts->ts_seqnum = AR5K_REG_MS(tx_status->tx_status_1, + AR5K_DESC_TX_STATUS1_SEQ_NUM); + ts->ts_rssi = AR5K_REG_MS(tx_status->tx_status_1, + AR5K_DESC_TX_STATUS1_ACK_SIG_STRENGTH); + ts->ts_antenna = (tx_status->tx_status_1 & + AR5K_DESC_TX_STATUS1_XMIT_ANTENNA) ? 2 : 1; + ts->ts_status = 0; + + switch (AR5K_REG_MS(tx_status->tx_status_1, + AR5K_DESC_TX_STATUS1_FINAL_TS_INDEX)) { + case 0: + ts->ts_rate = tx_ctl->tx_control_3 & + AR5K_4W_TX_DESC_CTL3_XMIT_RATE0; + break; + case 1: + ts->ts_rate = AR5K_REG_MS(tx_ctl->tx_control_3, + AR5K_4W_TX_DESC_CTL3_XMIT_RATE1); + ts->ts_longretry += AR5K_REG_MS(tx_ctl->tx_control_2, + AR5K_4W_TX_DESC_CTL2_XMIT_TRIES1); + break; + case 2: + ts->ts_rate = AR5K_REG_MS(tx_ctl->tx_control_3, + AR5K_4W_TX_DESC_CTL3_XMIT_RATE2); + ts->ts_longretry += AR5K_REG_MS(tx_ctl->tx_control_2, + AR5K_4W_TX_DESC_CTL2_XMIT_TRIES2); + break; + case 3: + ts->ts_rate = AR5K_REG_MS(tx_ctl->tx_control_3, + AR5K_4W_TX_DESC_CTL3_XMIT_RATE3); + ts->ts_longretry += AR5K_REG_MS(tx_ctl->tx_control_2, + AR5K_4W_TX_DESC_CTL2_XMIT_TRIES3); + break; + } + + /* TX error */ + if (!(tx_status->tx_status_0 & AR5K_DESC_TX_STATUS0_FRAME_XMIT_OK)) { + if (tx_status->tx_status_0 & + AR5K_DESC_TX_STATUS0_EXCESSIVE_RETRIES) + ts->ts_status |= AR5K_TXERR_XRETRY; + + if (tx_status->tx_status_0 & AR5K_DESC_TX_STATUS0_FIFO_UNDERRUN) + ts->ts_status |= AR5K_TXERR_FIFO; + + if (tx_status->tx_status_0 & AR5K_DESC_TX_STATUS0_FILTERED) + ts->ts_status |= AR5K_TXERR_FILT; + } + + return 0; +} + +/* + * RX Descriptors + */ + +/* + * Initialize an rx control descriptor + */ +static int ath5k_hw_setup_rx_desc(struct ath5k_hw *ah, struct ath5k_desc *desc, + u32 size, unsigned int flags) +{ + struct ath5k_hw_rx_ctl *rx_ctl; + + ATH5K_TRACE(ah->ah_sc); + rx_ctl = &desc->ud.ds_rx.rx_ctl; + + /* + * Clear the descriptor + * If we don't clean the status descriptor, + * while scanning we get too many results, + * most of them virtual, after some secs + * of scanning system hangs. M.F. + */ + memset(&desc->ud.ds_rx, 0, sizeof(struct ath5k_hw_all_rx_desc)); + + /* Setup descriptor */ + rx_ctl->rx_control_1 = size & AR5K_DESC_RX_CTL1_BUF_LEN; + if (unlikely(rx_ctl->rx_control_1 != size)) + return -EINVAL; + + if (flags & AR5K_RXDESC_INTREQ) + rx_ctl->rx_control_1 |= AR5K_DESC_RX_CTL1_INTREQ; + + return 0; +} + +/* + * Proccess the rx status descriptor on 5210/5211 + */ +static int ath5k_hw_proc_5210_rx_status(struct ath5k_hw *ah, + struct ath5k_desc *desc, struct ath5k_rx_status *rs) +{ + struct ath5k_hw_rx_status *rx_status; + + rx_status = &desc->ud.ds_rx.u.rx_stat; + + /* No frame received / not ready */ + if (unlikely(!(rx_status->rx_status_1 & + AR5K_5210_RX_DESC_STATUS1_DONE))) + return -EINPROGRESS; + + /* + * Frame receive status + */ + rs->rs_datalen = rx_status->rx_status_0 & + AR5K_5210_RX_DESC_STATUS0_DATA_LEN; + rs->rs_rssi = AR5K_REG_MS(rx_status->rx_status_0, + AR5K_5210_RX_DESC_STATUS0_RECEIVE_SIGNAL); + rs->rs_rate = AR5K_REG_MS(rx_status->rx_status_0, + AR5K_5210_RX_DESC_STATUS0_RECEIVE_RATE); + rs->rs_antenna = rx_status->rx_status_0 & + AR5K_5210_RX_DESC_STATUS0_RECEIVE_ANTENNA; + rs->rs_more = rx_status->rx_status_0 & + AR5K_5210_RX_DESC_STATUS0_MORE; + /* TODO: this timestamp is 13 bit, later on we assume 15 bit */ + rs->rs_tstamp = AR5K_REG_MS(rx_status->rx_status_1, + AR5K_5210_RX_DESC_STATUS1_RECEIVE_TIMESTAMP); + rs->rs_status = 0; + rs->rs_phyerr = 0; + + /* + * Key table status + */ + if (rx_status->rx_status_1 & AR5K_5210_RX_DESC_STATUS1_KEY_INDEX_VALID) + rs->rs_keyix = AR5K_REG_MS(rx_status->rx_status_1, + AR5K_5210_RX_DESC_STATUS1_KEY_INDEX); + else + rs->rs_keyix = AR5K_RXKEYIX_INVALID; + + /* + * Receive/descriptor errors + */ + if (!(rx_status->rx_status_1 & + AR5K_5210_RX_DESC_STATUS1_FRAME_RECEIVE_OK)) { + if (rx_status->rx_status_1 & + AR5K_5210_RX_DESC_STATUS1_CRC_ERROR) + rs->rs_status |= AR5K_RXERR_CRC; + + if (rx_status->rx_status_1 & + AR5K_5210_RX_DESC_STATUS1_FIFO_OVERRUN) + rs->rs_status |= AR5K_RXERR_FIFO; + + if (rx_status->rx_status_1 & + AR5K_5210_RX_DESC_STATUS1_PHY_ERROR) { + rs->rs_status |= AR5K_RXERR_PHY; + rs->rs_phyerr |= AR5K_REG_MS(rx_status->rx_status_1, + AR5K_5210_RX_DESC_STATUS1_PHY_ERROR); + } + + if (rx_status->rx_status_1 & + AR5K_5210_RX_DESC_STATUS1_DECRYPT_CRC_ERROR) + rs->rs_status |= AR5K_RXERR_DECRYPT; + } + + return 0; +} + +/* + * Proccess the rx status descriptor on 5212 + */ +static int ath5k_hw_proc_5212_rx_status(struct ath5k_hw *ah, + struct ath5k_desc *desc, struct ath5k_rx_status *rs) +{ + struct ath5k_hw_rx_status *rx_status; + struct ath5k_hw_rx_error *rx_err; + + ATH5K_TRACE(ah->ah_sc); + rx_status = &desc->ud.ds_rx.u.rx_stat; + + /* Overlay on error */ + rx_err = &desc->ud.ds_rx.u.rx_err; + + /* No frame received / not ready */ + if (unlikely(!(rx_status->rx_status_1 & + AR5K_5212_RX_DESC_STATUS1_DONE))) + return -EINPROGRESS; + + /* + * Frame receive status + */ + rs->rs_datalen = rx_status->rx_status_0 & + AR5K_5212_RX_DESC_STATUS0_DATA_LEN; + rs->rs_rssi = AR5K_REG_MS(rx_status->rx_status_0, + AR5K_5212_RX_DESC_STATUS0_RECEIVE_SIGNAL); + rs->rs_rate = AR5K_REG_MS(rx_status->rx_status_0, + AR5K_5212_RX_DESC_STATUS0_RECEIVE_RATE); + rs->rs_antenna = rx_status->rx_status_0 & + AR5K_5212_RX_DESC_STATUS0_RECEIVE_ANTENNA; + rs->rs_more = rx_status->rx_status_0 & + AR5K_5212_RX_DESC_STATUS0_MORE; + rs->rs_tstamp = AR5K_REG_MS(rx_status->rx_status_1, + AR5K_5212_RX_DESC_STATUS1_RECEIVE_TIMESTAMP); + rs->rs_status = 0; + rs->rs_phyerr = 0; + + /* + * Key table status + */ + if (rx_status->rx_status_1 & AR5K_5212_RX_DESC_STATUS1_KEY_INDEX_VALID) + rs->rs_keyix = AR5K_REG_MS(rx_status->rx_status_1, + AR5K_5212_RX_DESC_STATUS1_KEY_INDEX); + else + rs->rs_keyix = AR5K_RXKEYIX_INVALID; + + /* + * Receive/descriptor errors + */ + if (!(rx_status->rx_status_1 & + AR5K_5212_RX_DESC_STATUS1_FRAME_RECEIVE_OK)) { + if (rx_status->rx_status_1 & + AR5K_5212_RX_DESC_STATUS1_CRC_ERROR) + rs->rs_status |= AR5K_RXERR_CRC; + + if (rx_status->rx_status_1 & + AR5K_5212_RX_DESC_STATUS1_PHY_ERROR) { + rs->rs_status |= AR5K_RXERR_PHY; + rs->rs_phyerr |= AR5K_REG_MS(rx_err->rx_error_1, + AR5K_RX_DESC_ERROR1_PHY_ERROR_CODE); + } + + if (rx_status->rx_status_1 & + AR5K_5212_RX_DESC_STATUS1_DECRYPT_CRC_ERROR) + rs->rs_status |= AR5K_RXERR_DECRYPT; + + if (rx_status->rx_status_1 & + AR5K_5212_RX_DESC_STATUS1_MIC_ERROR) + rs->rs_status |= AR5K_RXERR_MIC; + } + + return 0; +} + +/* + * Init function pointers inside ath5k_hw struct + */ +int ath5k_hw_init_desc_functions(struct ath5k_hw *ah) +{ + + if (ah->ah_version != AR5K_AR5210 && + ah->ah_version != AR5K_AR5211 && + ah->ah_version != AR5K_AR5212) + return -ENOTSUPP; + + /* XXX: What is this magic value and where is it used ? */ + if (ah->ah_version == AR5K_AR5212) + ah->ah_magic = AR5K_EEPROM_MAGIC_5212; + else if (ah->ah_version == AR5K_AR5211) + ah->ah_magic = AR5K_EEPROM_MAGIC_5211; + + if (ah->ah_version == AR5K_AR5212) { + ah->ah_setup_rx_desc = ath5k_hw_setup_rx_desc; + ah->ah_setup_tx_desc = ath5k_hw_setup_4word_tx_desc; + ah->ah_setup_mrr_tx_desc = ath5k_hw_setup_mrr_tx_desc; + ah->ah_proc_tx_desc = ath5k_hw_proc_4word_tx_status; + } else { + ah->ah_setup_rx_desc = ath5k_hw_setup_rx_desc; + ah->ah_setup_tx_desc = ath5k_hw_setup_2word_tx_desc; + ah->ah_setup_mrr_tx_desc = ath5k_hw_setup_mrr_tx_desc; + ah->ah_proc_tx_desc = ath5k_hw_proc_2word_tx_status; + } + + if (ah->ah_version == AR5K_AR5212) + ah->ah_proc_rx_desc = ath5k_hw_proc_5212_rx_status; + else if (ah->ah_version <= AR5K_AR5211) + ah->ah_proc_rx_desc = ath5k_hw_proc_5210_rx_status; + + return 0; +} + diff --git a/drivers/net/wireless/ath5k/hw.h b/drivers/net/wireless/ath5k/desc.h index 64fca8dcb38..56158c804e3 100644 --- a/drivers/net/wireless/ath5k/hw.h +++ b/drivers/net/wireless/ath5k/desc.h @@ -1,8 +1,6 @@ /* - * Copyright (c) 2004-2007 Reyk Floeter <reyk@openbsd.org> - * Copyright (c) 2006-2007 Nick Kossifidis <mickflemm@gmail.com> - * Copyright (c) 2007 Matthew W. S. Bell <mentor@madwifi.org> - * Copyright (c) 2007 Luis Rodriguez <mcgrof@winlab.rutgers.edu> + * Copyright (c) 2004-2008 Reyk Floeter <reyk@openbsd.org> + * Copyright (c) 2006-2008 Nick Kossifidis <mickflemm@gmail.com> * * Permission to use, copy, modify, and distribute this software for any * purpose with or without fee is hereby granted, provided that the above @@ -15,159 +13,9 @@ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * */ -#include <linux/delay.h> - -/* - * Gain settings - */ - -enum ath5k_rfgain { - AR5K_RFGAIN_INACTIVE = 0, - AR5K_RFGAIN_READ_REQUESTED, - AR5K_RFGAIN_NEED_CHANGE, -}; - -#define AR5K_GAIN_CRN_FIX_BITS_5111 4 -#define AR5K_GAIN_CRN_FIX_BITS_5112 7 -#define AR5K_GAIN_CRN_MAX_FIX_BITS AR5K_GAIN_CRN_FIX_BITS_5112 -#define AR5K_GAIN_DYN_ADJUST_HI_MARGIN 15 -#define AR5K_GAIN_DYN_ADJUST_LO_MARGIN 20 -#define AR5K_GAIN_CCK_PROBE_CORR 5 -#define AR5K_GAIN_CCK_OFDM_GAIN_DELTA 15 -#define AR5K_GAIN_STEP_COUNT 10 -#define AR5K_GAIN_PARAM_TX_CLIP 0 -#define AR5K_GAIN_PARAM_PD_90 1 -#define AR5K_GAIN_PARAM_PD_84 2 -#define AR5K_GAIN_PARAM_GAIN_SEL 3 -#define AR5K_GAIN_PARAM_MIX_ORN 0 -#define AR5K_GAIN_PARAM_PD_138 1 -#define AR5K_GAIN_PARAM_PD_137 2 -#define AR5K_GAIN_PARAM_PD_136 3 -#define AR5K_GAIN_PARAM_PD_132 4 -#define AR5K_GAIN_PARAM_PD_131 5 -#define AR5K_GAIN_PARAM_PD_130 6 -#define AR5K_GAIN_CHECK_ADJUST(_g) \ - ((_g)->g_current <= (_g)->g_low || (_g)->g_current >= (_g)->g_high) - -struct ath5k_gain_opt_step { - s16 gos_param[AR5K_GAIN_CRN_MAX_FIX_BITS]; - s32 gos_gain; -}; - -struct ath5k_gain { - u32 g_step_idx; - u32 g_current; - u32 g_target; - u32 g_low; - u32 g_high; - u32 g_f_corr; - u32 g_active; - const struct ath5k_gain_opt_step *g_step; -}; - - -/* - * HW SPECIFIC STRUCTS - */ - -/* Some EEPROM defines */ -#define AR5K_EEPROM_EEP_SCALE 100 -#define AR5K_EEPROM_EEP_DELTA 10 -#define AR5K_EEPROM_N_MODES 3 -#define AR5K_EEPROM_N_5GHZ_CHAN 10 -#define AR5K_EEPROM_N_2GHZ_CHAN 3 -#define AR5K_EEPROM_MAX_CHAN 10 -#define AR5K_EEPROM_N_PCDAC 11 -#define AR5K_EEPROM_N_TEST_FREQ 8 -#define AR5K_EEPROM_N_EDGES 8 -#define AR5K_EEPROM_N_INTERCEPTS 11 -#define AR5K_EEPROM_FREQ_M(_v) AR5K_EEPROM_OFF(_v, 0x7f, 0xff) -#define AR5K_EEPROM_PCDAC_M 0x3f -#define AR5K_EEPROM_PCDAC_START 1 -#define AR5K_EEPROM_PCDAC_STOP 63 -#define AR5K_EEPROM_PCDAC_STEP 1 -#define AR5K_EEPROM_NON_EDGE_M 0x40 -#define AR5K_EEPROM_CHANNEL_POWER 8 -#define AR5K_EEPROM_N_OBDB 4 -#define AR5K_EEPROM_OBDB_DIS 0xffff -#define AR5K_EEPROM_CHANNEL_DIS 0xff -#define AR5K_EEPROM_SCALE_OC_DELTA(_x) (((_x) * 2) / 10) -#define AR5K_EEPROM_N_CTLS(_v) AR5K_EEPROM_OFF(_v, 16, 32) -#define AR5K_EEPROM_MAX_CTLS 32 -#define AR5K_EEPROM_N_XPD_PER_CHANNEL 4 -#define AR5K_EEPROM_N_XPD0_POINTS 4 -#define AR5K_EEPROM_N_XPD3_POINTS 3 -#define AR5K_EEPROM_N_INTERCEPT_10_2GHZ 35 -#define AR5K_EEPROM_N_INTERCEPT_10_5GHZ 55 -#define AR5K_EEPROM_POWER_M 0x3f -#define AR5K_EEPROM_POWER_MIN 0 -#define AR5K_EEPROM_POWER_MAX 3150 -#define AR5K_EEPROM_POWER_STEP 50 -#define AR5K_EEPROM_POWER_TABLE_SIZE 64 -#define AR5K_EEPROM_N_POWER_LOC_11B 4 -#define AR5K_EEPROM_N_POWER_LOC_11G 6 -#define AR5K_EEPROM_I_GAIN 10 -#define AR5K_EEPROM_CCK_OFDM_DELTA 15 -#define AR5K_EEPROM_N_IQ_CAL 2 - -/* Struct to hold EEPROM calibration data */ -struct ath5k_eeprom_info { - u16 ee_magic; - u16 ee_protect; - u16 ee_regdomain; - u16 ee_version; - u16 ee_header; - u16 ee_ant_gain; - u16 ee_misc0; - u16 ee_misc1; - u16 ee_cck_ofdm_gain_delta; - u16 ee_cck_ofdm_power_delta; - u16 ee_scaled_cck_delta; - - /* Used for tx thermal adjustment (eeprom_init, rfregs) */ - u16 ee_tx_clip; - u16 ee_pwd_84; - u16 ee_pwd_90; - u16 ee_gain_select; - - /* RF Calibration settings (reset, rfregs) */ - u16 ee_i_cal[AR5K_EEPROM_N_MODES]; - u16 ee_q_cal[AR5K_EEPROM_N_MODES]; - u16 ee_fixed_bias[AR5K_EEPROM_N_MODES]; - u16 ee_turbo_max_power[AR5K_EEPROM_N_MODES]; - u16 ee_xr_power[AR5K_EEPROM_N_MODES]; - u16 ee_switch_settling[AR5K_EEPROM_N_MODES]; - u16 ee_ant_tx_rx[AR5K_EEPROM_N_MODES]; - u16 ee_ant_control[AR5K_EEPROM_N_MODES][AR5K_EEPROM_N_PCDAC]; - u16 ee_ob[AR5K_EEPROM_N_MODES][AR5K_EEPROM_N_OBDB]; - u16 ee_db[AR5K_EEPROM_N_MODES][AR5K_EEPROM_N_OBDB]; - u16 ee_tx_end2xlna_enable[AR5K_EEPROM_N_MODES]; - u16 ee_tx_end2xpa_disable[AR5K_EEPROM_N_MODES]; - u16 ee_tx_frm2xpa_enable[AR5K_EEPROM_N_MODES]; - u16 ee_thr_62[AR5K_EEPROM_N_MODES]; - u16 ee_xlna_gain[AR5K_EEPROM_N_MODES]; - u16 ee_xpd[AR5K_EEPROM_N_MODES]; - u16 ee_x_gain[AR5K_EEPROM_N_MODES]; - u16 ee_i_gain[AR5K_EEPROM_N_MODES]; - u16 ee_margin_tx_rx[AR5K_EEPROM_N_MODES]; - - /* Unused */ - u16 ee_false_detect[AR5K_EEPROM_N_MODES]; - u16 ee_cal_pier[AR5K_EEPROM_N_MODES][AR5K_EEPROM_N_2GHZ_CHAN]; - u16 ee_channel[AR5K_EEPROM_N_MODES][AR5K_EEPROM_MAX_CHAN]; /*empty*/ - - /* Conformance test limits (Unused) */ - u16 ee_ctls; - u16 ee_ctl[AR5K_EEPROM_MAX_CTLS]; - - /* Noise Floor Calibration settings */ - s16 ee_noise_floor_thr[AR5K_EEPROM_N_MODES]; - s8 ee_adc_desired_size[AR5K_EEPROM_N_MODES]; - s8 ee_pga_desired_size[AR5K_EEPROM_N_MODES]; -}; - /* * Internal RX/TX descriptor structures * (rX: reserved fields possibily used by future versions of the ar5k chipset) @@ -178,14 +26,15 @@ struct ath5k_eeprom_info { */ struct ath5k_hw_rx_ctl { u32 rx_control_0; /* RX control word 0 */ + u32 rx_control_1; /* RX control word 1 */ +} __packed; +/* RX control word 0 field/sflags */ #define AR5K_DESC_RX_CTL0 0x00000000 - u32 rx_control_1; /* RX control word 1 */ - +/* RX control word 1 fields/flags */ #define AR5K_DESC_RX_CTL1_BUF_LEN 0x00000fff #define AR5K_DESC_RX_CTL1_INTREQ 0x00002000 -} __packed; /* * common hardware RX status descriptor @@ -197,6 +46,7 @@ struct ath5k_hw_rx_status { } __packed; /* 5210/5211 */ +/* RX status word 0 fields/flags */ #define AR5K_5210_RX_DESC_STATUS0_DATA_LEN 0x00000fff #define AR5K_5210_RX_DESC_STATUS0_MORE 0x00001000 #define AR5K_5210_RX_DESC_STATUS0_RECEIVE_RATE 0x00078000 @@ -205,6 +55,8 @@ struct ath5k_hw_rx_status { #define AR5K_5210_RX_DESC_STATUS0_RECEIVE_SIGNAL_S 19 #define AR5K_5210_RX_DESC_STATUS0_RECEIVE_ANTENNA 0x38000000 #define AR5K_5210_RX_DESC_STATUS0_RECEIVE_ANTENNA_S 27 + +/* RX status word 1 fields/flags */ #define AR5K_5210_RX_DESC_STATUS1_DONE 0x00000001 #define AR5K_5210_RX_DESC_STATUS1_FRAME_RECEIVE_OK 0x00000002 #define AR5K_5210_RX_DESC_STATUS1_CRC_ERROR 0x00000004 @@ -220,6 +72,7 @@ struct ath5k_hw_rx_status { #define AR5K_5210_RX_DESC_STATUS1_KEY_CACHE_MISS 0x10000000 /* 5212 */ +/* RX status word 0 fields/flags */ #define AR5K_5212_RX_DESC_STATUS0_DATA_LEN 0x00000fff #define AR5K_5212_RX_DESC_STATUS0_MORE 0x00001000 #define AR5K_5212_RX_DESC_STATUS0_DECOMP_CRC_ERROR 0x00002000 @@ -229,6 +82,8 @@ struct ath5k_hw_rx_status { #define AR5K_5212_RX_DESC_STATUS0_RECEIVE_SIGNAL_S 20 #define AR5K_5212_RX_DESC_STATUS0_RECEIVE_ANTENNA 0xf0000000 #define AR5K_5212_RX_DESC_STATUS0_RECEIVE_ANTENNA_S 28 + +/* RX status word 1 fields/flags */ #define AR5K_5212_RX_DESC_STATUS1_DONE 0x00000001 #define AR5K_5212_RX_DESC_STATUS1_FRAME_RECEIVE_OK 0x00000002 #define AR5K_5212_RX_DESC_STATUS1_CRC_ERROR 0x00000004 @@ -246,16 +101,18 @@ struct ath5k_hw_rx_status { * common hardware RX error descriptor */ struct ath5k_hw_rx_error { - u32 rx_error_0; /* RX error word 0 */ + u32 rx_error_0; /* RX status word 0 */ + u32 rx_error_1; /* RX status word 1 */ +} __packed; +/* RX error word 0 fields/flags */ #define AR5K_RX_DESC_ERROR0 0x00000000 - u32 rx_error_1; /* RX error word 1 */ - +/* RX error word 1 fields/flags */ #define AR5K_RX_DESC_ERROR1_PHY_ERROR_CODE 0x0000ff00 #define AR5K_RX_DESC_ERROR1_PHY_ERROR_CODE_S 8 -} __packed; +/* PHY Error codes */ #define AR5K_DESC_RX_PHY_ERROR_NONE 0x00 #define AR5K_DESC_RX_PHY_ERROR_TIMING 0x20 #define AR5K_DESC_RX_PHY_ERROR_PARITY 0x40 @@ -270,7 +127,10 @@ struct ath5k_hw_rx_error { */ struct ath5k_hw_2w_tx_ctl { u32 tx_control_0; /* TX control word 0 */ + u32 tx_control_1; /* TX control word 1 */ +} __packed; +/* TX control word 0 fields/flags */ #define AR5K_2W_TX_DESC_CTL0_FRAME_LEN 0x00000fff #define AR5K_2W_TX_DESC_CTL0_HEADER_LEN 0x0003f000 /*[5210 ?]*/ #define AR5K_2W_TX_DESC_CTL0_HEADER_LEN_S 12 @@ -284,29 +144,34 @@ struct ath5k_hw_2w_tx_ctl { #define AR5K_2W_TX_DESC_CTL0_FRAME_TYPE_S 26 #define AR5K_2W_TX_DESC_CTL0_ANT_MODE_XMIT_5210 0x02000000 #define AR5K_2W_TX_DESC_CTL0_ANT_MODE_XMIT_5211 0x1e000000 -#define AR5K_2W_TX_DESC_CTL0_ANT_MODE_XMIT (ah->ah_version == AR5K_AR5210 ? \ - AR5K_2W_TX_DESC_CTL0_ANT_MODE_XMIT_5210 : \ - AR5K_2W_TX_DESC_CTL0_ANT_MODE_XMIT_5211) + +#define AR5K_2W_TX_DESC_CTL0_ANT_MODE_XMIT \ + (ah->ah_version == AR5K_AR5210 ? \ + AR5K_2W_TX_DESC_CTL0_ANT_MODE_XMIT_5210 : \ + AR5K_2W_TX_DESC_CTL0_ANT_MODE_XMIT_5211) + #define AR5K_2W_TX_DESC_CTL0_ANT_MODE_XMIT_S 25 #define AR5K_2W_TX_DESC_CTL0_INTREQ 0x20000000 #define AR5K_2W_TX_DESC_CTL0_ENCRYPT_KEY_VALID 0x40000000 - u32 tx_control_1; /* TX control word 1 */ - +/* TX control word 1 fields/flags */ #define AR5K_2W_TX_DESC_CTL1_BUF_LEN 0x00000fff #define AR5K_2W_TX_DESC_CTL1_MORE 0x00001000 #define AR5K_2W_TX_DESC_CTL1_ENCRYPT_KEY_INDEX_5210 0x0007e000 #define AR5K_2W_TX_DESC_CTL1_ENCRYPT_KEY_INDEX_5211 0x000fe000 -#define AR5K_2W_TX_DESC_CTL1_ENCRYPT_KEY_INDEX (ah->ah_version == AR5K_AR5210 ? \ - AR5K_2W_TX_DESC_CTL1_ENCRYPT_KEY_INDEX_5210 : \ - AR5K_2W_TX_DESC_CTL1_ENCRYPT_KEY_INDEX_5211) + +#define AR5K_2W_TX_DESC_CTL1_ENCRYPT_KEY_INDEX \ + (ah->ah_version == AR5K_AR5210 ? \ + AR5K_2W_TX_DESC_CTL1_ENCRYPT_KEY_INDEX_5210 : \ + AR5K_2W_TX_DESC_CTL1_ENCRYPT_KEY_INDEX_5211) + #define AR5K_2W_TX_DESC_CTL1_ENCRYPT_KEY_INDEX_S 13 #define AR5K_2W_TX_DESC_CTL1_FRAME_TYPE 0x00700000 /*[5211]*/ #define AR5K_2W_TX_DESC_CTL1_FRAME_TYPE_S 20 #define AR5K_2W_TX_DESC_CTL1_NOACK 0x00800000 /*[5211]*/ #define AR5K_2W_TX_DESC_CTL1_RTS_DURATION 0xfff80000 /*[5210 ?]*/ -} __packed; +/* Frame types */ #define AR5K_AR5210_TX_DESC_FRAME_TYPE_NORMAL 0x00 #define AR5K_AR5210_TX_DESC_FRAME_TYPE_ATIM 0x04 #define AR5K_AR5210_TX_DESC_FRAME_TYPE_PSPOLL 0x08 @@ -378,7 +243,10 @@ struct ath5k_hw_4w_tx_ctl { */ struct ath5k_hw_tx_status { u32 tx_status_0; /* TX status word 0 */ + u32 tx_status_1; /* TX status word 1 */ +} __packed; +/* TX status word 0 fields/flags */ #define AR5K_DESC_TX_STATUS0_FRAME_XMIT_OK 0x00000001 #define AR5K_DESC_TX_STATUS0_EXCESSIVE_RETRIES 0x00000002 #define AR5K_DESC_TX_STATUS0_FIFO_UNDERRUN 0x00000004 @@ -400,8 +268,7 @@ struct ath5k_hw_tx_status { #define AR5K_DESC_TX_STATUS0_SEND_TIMESTAMP 0xffff0000 #define AR5K_DESC_TX_STATUS0_SEND_TIMESTAMP_S 16 - u32 tx_status_1; /* TX status word 1 */ - +/* TX status word 1 fields/flags */ #define AR5K_DESC_TX_STATUS1_DONE 0x00000001 #define AR5K_DESC_TX_STATUS1_SEQ_NUM 0x00001ffe #define AR5K_DESC_TX_STATUS1_SEQ_NUM_S 1 @@ -411,8 +278,6 @@ struct ath5k_hw_tx_status { #define AR5K_DESC_TX_STATUS1_FINAL_TS_INDEX_S 21 #define AR5K_DESC_TX_STATUS1_COMP_SUCCESS 0x00800000 #define AR5K_DESC_TX_STATUS1_XMIT_ANTENNA 0x01000000 -} __packed; - /* * 5210/5211 hardware TX descriptor @@ -441,176 +306,27 @@ struct ath5k_hw_all_rx_desc { } u; } __packed; - /* - * AR5K REGISTER ACCESS + * Atheros hardware descriptor + * This is read and written to by the hardware */ +struct ath5k_desc { + u32 ds_link; /* physical address of the next descriptor */ + u32 ds_data; /* physical address of data buffer (skb) */ -/*Swap RX/TX Descriptor for big endian archs*/ -#if defined(__BIG_ENDIAN) -#define AR5K_INIT_CFG ( \ - AR5K_CFG_SWTD | AR5K_CFG_SWRD \ -) -#else -#define AR5K_INIT_CFG 0x00000000 -#endif - -/*#define AR5K_REG_READ(_reg) ath5k_hw_reg_read(ah, _reg) - -#define AR5K_REG_WRITE(_reg, _val) ath5k_hw_reg_write(ah, _val, _reg)*/ - -#define AR5K_REG_SM(_val, _flags) \ - (((_val) << _flags##_S) & (_flags)) - -#define AR5K_REG_MS(_val, _flags) \ - (((_val) & (_flags)) >> _flags##_S) - -/* Some registers can hold multiple values of interest. For this - * reason when we want to write to these registers we must first - * retrieve the values which we do not want to clear (lets call this - * old_data) and then set the register with this and our new_value: - * ( old_data | new_value) */ -#define AR5K_REG_WRITE_BITS(ah, _reg, _flags, _val) \ - ath5k_hw_reg_write(ah, (ath5k_hw_reg_read(ah, _reg) & ~(_flags)) | \ - (((_val) << _flags##_S) & (_flags)), _reg) - -#define AR5K_REG_MASKED_BITS(ah, _reg, _flags, _mask) \ - ath5k_hw_reg_write(ah, (ath5k_hw_reg_read(ah, _reg) & \ - (_mask)) | (_flags), _reg) - -#define AR5K_REG_ENABLE_BITS(ah, _reg, _flags) \ - ath5k_hw_reg_write(ah, ath5k_hw_reg_read(ah, _reg) | (_flags), _reg) - -#define AR5K_REG_DISABLE_BITS(ah, _reg, _flags) \ - ath5k_hw_reg_write(ah, ath5k_hw_reg_read(ah, _reg) & ~(_flags), _reg) - -#define AR5K_PHY_WRITE(ah, _reg, _val) \ - ath5k_hw_reg_write(ah, _val, (ah)->ah_phy + ((_reg) << 2)) - -#define AR5K_PHY_READ(ah, _reg) \ - ath5k_hw_reg_read(ah, (ah)->ah_phy + ((_reg) << 2)) - -#define AR5K_REG_WAIT(_i) do { \ - if (_i % 64) \ - udelay(1); \ -} while (0) - -#define AR5K_EEPROM_READ(_o, _v) do { \ - if ((ret = ath5k_hw_eeprom_read(ah, (_o), &(_v))) != 0) \ - return (ret); \ -} while (0) - -#define AR5K_EEPROM_READ_HDR(_o, _v) \ - AR5K_EEPROM_READ(_o, ah->ah_capabilities.cap_eeprom._v); \ - -/* Read status of selected queue */ -#define AR5K_REG_READ_Q(ah, _reg, _queue) \ - (ath5k_hw_reg_read(ah, _reg) & (1 << _queue)) \ - -#define AR5K_REG_WRITE_Q(ah, _reg, _queue) \ - ath5k_hw_reg_write(ah, (1 << _queue), _reg) - -#define AR5K_Q_ENABLE_BITS(_reg, _queue) do { \ - _reg |= 1 << _queue; \ -} while (0) - -#define AR5K_Q_DISABLE_BITS(_reg, _queue) do { \ - _reg &= ~(1 << _queue); \ -} while (0) - -#define AR5K_LOW_ID(_a)( \ -(_a)[0] | (_a)[1] << 8 | (_a)[2] << 16 | (_a)[3] << 24 \ -) - -#define AR5K_HIGH_ID(_a) ((_a)[4] | (_a)[5] << 8) - -/* - * Initial register values - */ - -/* - * Common initial register values - */ -#define AR5K_INIT_MODE CHANNEL_B - -#define AR5K_INIT_TX_LATENCY 502 -#define AR5K_INIT_USEC 39 -#define AR5K_INIT_USEC_TURBO 79 -#define AR5K_INIT_USEC_32 31 -#define AR5K_INIT_CARR_SENSE_EN 1 -#define AR5K_INIT_PROG_IFS 920 -#define AR5K_INIT_PROG_IFS_TURBO 960 -#define AR5K_INIT_EIFS 3440 -#define AR5K_INIT_EIFS_TURBO 6880 -#define AR5K_INIT_SLOT_TIME 396 -#define AR5K_INIT_SLOT_TIME_TURBO 480 -#define AR5K_INIT_ACK_CTS_TIMEOUT 1024 -#define AR5K_INIT_ACK_CTS_TIMEOUT_TURBO 0x08000800 -#define AR5K_INIT_SIFS 560 -#define AR5K_INIT_SIFS_TURBO 480 -#define AR5K_INIT_SH_RETRY 10 -#define AR5K_INIT_LG_RETRY AR5K_INIT_SH_RETRY -#define AR5K_INIT_SSH_RETRY 32 -#define AR5K_INIT_SLG_RETRY AR5K_INIT_SSH_RETRY -#define AR5K_INIT_TX_RETRY 10 -#define AR5K_INIT_TOPS 8 -#define AR5K_INIT_RXNOFRM 8 -#define AR5K_INIT_RPGTO 0 -#define AR5K_INIT_TXNOFRM 0 -#define AR5K_INIT_BEACON_PERIOD 65535 -#define AR5K_INIT_TIM_OFFSET 0 -#define AR5K_INIT_BEACON_EN 0 -#define AR5K_INIT_RESET_TSF 0 - -#define AR5K_INIT_TRANSMIT_LATENCY ( \ - (AR5K_INIT_TX_LATENCY << 14) | (AR5K_INIT_USEC_32 << 7) | \ - (AR5K_INIT_USEC) \ -) -#define AR5K_INIT_TRANSMIT_LATENCY_TURBO ( \ - (AR5K_INIT_TX_LATENCY << 14) | (AR5K_INIT_USEC_32 << 7) | \ - (AR5K_INIT_USEC_TURBO) \ -) -#define AR5K_INIT_PROTO_TIME_CNTRL ( \ - (AR5K_INIT_CARR_SENSE_EN << 26) | (AR5K_INIT_EIFS << 12) | \ - (AR5K_INIT_PROG_IFS) \ -) -#define AR5K_INIT_PROTO_TIME_CNTRL_TURBO ( \ - (AR5K_INIT_CARR_SENSE_EN << 26) | (AR5K_INIT_EIFS_TURBO << 12) | \ - (AR5K_INIT_PROG_IFS_TURBO) \ -) -#define AR5K_INIT_BEACON_CONTROL ( \ - (AR5K_INIT_RESET_TSF << 24) | (AR5K_INIT_BEACON_EN << 23) | \ - (AR5K_INIT_TIM_OFFSET << 16) | (AR5K_INIT_BEACON_PERIOD) \ -) - -/* - * Non-common initial register values which have to be loaded into the - * card at boot time and after each reset. - */ - -/* Register dumps are done per operation mode */ -#define AR5K_INI_RFGAIN_5GHZ 0 -#define AR5K_INI_RFGAIN_2GHZ 1 - -#define AR5K_INI_VAL_11A 0 -#define AR5K_INI_VAL_11A_TURBO 1 -#define AR5K_INI_VAL_11B 2 -#define AR5K_INI_VAL_11G 3 -#define AR5K_INI_VAL_11G_TURBO 4 -#define AR5K_INI_VAL_XR 0 -#define AR5K_INI_VAL_MAX 5 - -#define AR5K_RF5111_INI_RF_MAX_BANKS AR5K_MAX_RF_BANKS -#define AR5K_RF5112_INI_RF_MAX_BANKS AR5K_MAX_RF_BANKS + union { + struct ath5k_hw_5210_tx_desc ds_tx5210; + struct ath5k_hw_5212_tx_desc ds_tx5212; + struct ath5k_hw_all_rx_desc ds_rx; + } ud; +} __packed; -static inline u32 ath5k_hw_bitswap(u32 val, unsigned int bits) -{ - u32 retval = 0, bit, i; +#define AR5K_RXDESC_INTREQ 0x0020 - for (i = 0; i < bits; i++) { - bit = (val >> i) & 1; - retval = (retval << 1) | bit; - } +#define AR5K_TXDESC_CLRDMASK 0x0001 +#define AR5K_TXDESC_NOACK 0x0002 /*[5211+]*/ +#define AR5K_TXDESC_RTSENA 0x0004 +#define AR5K_TXDESC_CTSENA 0x0008 +#define AR5K_TXDESC_INTREQ 0x0010 +#define AR5K_TXDESC_VEOL 0x0020 /*[5211+]*/ - return retval; -} diff --git a/drivers/net/wireless/ath5k/dma.c b/drivers/net/wireless/ath5k/dma.c new file mode 100644 index 00000000000..a28090be960 --- /dev/null +++ b/drivers/net/wireless/ath5k/dma.c @@ -0,0 +1,566 @@ +/* + * Copyright (c) 2004-2008 Reyk Floeter <reyk@openbsd.org> + * Copyright (c) 2006-2008 Nick Kossifidis <mickflemm@gmail.com> + * + * Permission to use, copy, modify, and distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * + */ + +/*************************************\ +* DMA and interrupt masking functions * +\*************************************/ + +/* + * dma.c - DMA and interrupt masking functions + * + * Here we setup descriptor pointers (rxdp/txdp) start/stop dma engine and + * handle queue setup for 5210 chipset (rest are handled on qcu.c). + * Also we setup interrupt mask register (IMR) and read the various iterrupt + * status registers (ISR). + * + * TODO: Handle SISR on 5211+ and introduce a function to return the queue + * number that resulted the interrupt. + */ + +#include "ath5k.h" +#include "reg.h" +#include "debug.h" +#include "base.h" + +/*********\ +* Receive * +\*********/ + +/** + * ath5k_hw_start_rx_dma - Start DMA receive + * + * @ah: The &struct ath5k_hw + */ +void ath5k_hw_start_rx_dma(struct ath5k_hw *ah) +{ + ATH5K_TRACE(ah->ah_sc); + ath5k_hw_reg_write(ah, AR5K_CR_RXE, AR5K_CR); + ath5k_hw_reg_read(ah, AR5K_CR); +} + +/** + * ath5k_hw_stop_rx_dma - Stop DMA receive + * + * @ah: The &struct ath5k_hw + */ +int ath5k_hw_stop_rx_dma(struct ath5k_hw *ah) +{ + unsigned int i; + + ATH5K_TRACE(ah->ah_sc); + ath5k_hw_reg_write(ah, AR5K_CR_RXD, AR5K_CR); + + /* + * It may take some time to disable the DMA receive unit + */ + for (i = 2000; i > 0 && + (ath5k_hw_reg_read(ah, AR5K_CR) & AR5K_CR_RXE) != 0; + i--) + udelay(10); + + return i ? 0 : -EBUSY; +} + +/** + * ath5k_hw_get_rxdp - Get RX Descriptor's address + * + * @ah: The &struct ath5k_hw + * + * XXX: Is RXDP read and clear ? + */ +u32 ath5k_hw_get_rxdp(struct ath5k_hw *ah) +{ + return ath5k_hw_reg_read(ah, AR5K_RXDP); +} + +/** + * ath5k_hw_set_rxdp - Set RX Descriptor's address + * + * @ah: The &struct ath5k_hw + * @phys_addr: RX descriptor address + * + * XXX: Should we check if rx is enabled before setting rxdp ? + */ +void ath5k_hw_set_rxdp(struct ath5k_hw *ah, u32 phys_addr) +{ + ATH5K_TRACE(ah->ah_sc); + + ath5k_hw_reg_write(ah, phys_addr, AR5K_RXDP); +} + + +/**********\ +* Transmit * +\**********/ + +/** + * ath5k_hw_start_tx_dma - Start DMA transmit for a specific queue + * + * @ah: The &struct ath5k_hw + * @queue: The hw queue number + * + * Start DMA transmit for a specific queue and since 5210 doesn't have + * QCU/DCU, set up queue parameters for 5210 here based on queue type (one + * queue for normal data and one queue for beacons). For queue setup + * on newer chips check out qcu.c. Returns -EINVAL if queue number is out + * of range or if queue is already disabled. + * + * NOTE: Must be called after setting up tx control descriptor for that + * queue (see below). + */ +int ath5k_hw_start_tx_dma(struct ath5k_hw *ah, unsigned int queue) +{ + u32 tx_queue; + + ATH5K_TRACE(ah->ah_sc); + AR5K_ASSERT_ENTRY(queue, ah->ah_capabilities.cap_queues.q_tx_num); + + /* Return if queue is declared inactive */ + if (ah->ah_txq[queue].tqi_type == AR5K_TX_QUEUE_INACTIVE) + return -EIO; + + if (ah->ah_version == AR5K_AR5210) { + tx_queue = ath5k_hw_reg_read(ah, AR5K_CR); + + /* + * Set the queue by type on 5210 + */ + switch (ah->ah_txq[queue].tqi_type) { + case AR5K_TX_QUEUE_DATA: + tx_queue |= AR5K_CR_TXE0 & ~AR5K_CR_TXD0; + break; + case AR5K_TX_QUEUE_BEACON: + tx_queue |= AR5K_CR_TXE1 & ~AR5K_CR_TXD1; + ath5k_hw_reg_write(ah, AR5K_BCR_TQ1V | AR5K_BCR_BDMAE, + AR5K_BSR); + break; + case AR5K_TX_QUEUE_CAB: + tx_queue |= AR5K_CR_TXE1 & ~AR5K_CR_TXD1; + ath5k_hw_reg_write(ah, AR5K_BCR_TQ1FV | AR5K_BCR_TQ1V | + AR5K_BCR_BDMAE, AR5K_BSR); + break; + default: + return -EINVAL; + } + /* Start queue */ + ath5k_hw_reg_write(ah, tx_queue, AR5K_CR); + ath5k_hw_reg_read(ah, AR5K_CR); + } else { + /* Return if queue is disabled */ + if (AR5K_REG_READ_Q(ah, AR5K_QCU_TXD, queue)) + return -EIO; + + /* Start queue */ + AR5K_REG_WRITE_Q(ah, AR5K_QCU_TXE, queue); + } + + return 0; +} + +/** + * ath5k_hw_stop_tx_dma - Stop DMA transmit on a specific queue + * + * @ah: The &struct ath5k_hw + * @queue: The hw queue number + * + * Stop DMA transmit on a specific hw queue and drain queue so we don't + * have any pending frames. Returns -EBUSY if we still have pending frames, + * -EINVAL if queue number is out of range. + * + * TODO: Test queue drain code + */ +int ath5k_hw_stop_tx_dma(struct ath5k_hw *ah, unsigned int queue) +{ + unsigned int i = 100; + u32 tx_queue, pending; + + ATH5K_TRACE(ah->ah_sc); + AR5K_ASSERT_ENTRY(queue, ah->ah_capabilities.cap_queues.q_tx_num); + + /* Return if queue is declared inactive */ + if (ah->ah_txq[queue].tqi_type == AR5K_TX_QUEUE_INACTIVE) + return -EIO; + + if (ah->ah_version == AR5K_AR5210) { + tx_queue = ath5k_hw_reg_read(ah, AR5K_CR); + + /* + * Set by queue type + */ + switch (ah->ah_txq[queue].tqi_type) { + case AR5K_TX_QUEUE_DATA: + tx_queue |= AR5K_CR_TXD0 & ~AR5K_CR_TXE0; + break; + case AR5K_TX_QUEUE_BEACON: + case AR5K_TX_QUEUE_CAB: + /* XXX Fix me... */ + tx_queue |= AR5K_CR_TXD1 & ~AR5K_CR_TXD1; + ath5k_hw_reg_write(ah, 0, AR5K_BSR); + break; + default: + return -EINVAL; + } + + /* Stop queue */ + ath5k_hw_reg_write(ah, tx_queue, AR5K_CR); + ath5k_hw_reg_read(ah, AR5K_CR); + } else { + /* + * Schedule TX disable and wait until queue is empty + */ + AR5K_REG_WRITE_Q(ah, AR5K_QCU_TXD, queue); + + /*Check for pending frames*/ + do { + pending = ath5k_hw_reg_read(ah, + AR5K_QUEUE_STATUS(queue)) & + AR5K_QCU_STS_FRMPENDCNT; + udelay(100); + } while (--i && pending); + + /* Clear register */ + ath5k_hw_reg_write(ah, 0, AR5K_QCU_TXD); + if (pending) + return -EBUSY; + } + + /* TODO: Check for success else return error */ + return 0; +} + +/** + * ath5k_hw_get_txdp - Get TX Descriptor's address for a specific queue + * + * @ah: The &struct ath5k_hw + * @queue: The hw queue number + * + * Get TX descriptor's address for a specific queue. For 5210 we ignore + * the queue number and use tx queue type since we only have 2 queues. + * We use TXDP0 for normal data queue and TXDP1 for beacon queue. + * For newer chips with QCU/DCU we just read the corresponding TXDP register. + * + * XXX: Is TXDP read and clear ? + */ +u32 ath5k_hw_get_txdp(struct ath5k_hw *ah, unsigned int queue) +{ + u16 tx_reg; + + ATH5K_TRACE(ah->ah_sc); + AR5K_ASSERT_ENTRY(queue, ah->ah_capabilities.cap_queues.q_tx_num); + + /* + * Get the transmit queue descriptor pointer from the selected queue + */ + /*5210 doesn't have QCU*/ + if (ah->ah_version == AR5K_AR5210) { + switch (ah->ah_txq[queue].tqi_type) { + case AR5K_TX_QUEUE_DATA: + tx_reg = AR5K_NOQCU_TXDP0; + break; + case AR5K_TX_QUEUE_BEACON: + case AR5K_TX_QUEUE_CAB: + tx_reg = AR5K_NOQCU_TXDP1; + break; + default: + return 0xffffffff; + } + } else { + tx_reg = AR5K_QUEUE_TXDP(queue); + } + + return ath5k_hw_reg_read(ah, tx_reg); +} + +/** + * ath5k_hw_set_txdp - Set TX Descriptor's address for a specific queue + * + * @ah: The &struct ath5k_hw + * @queue: The hw queue number + * + * Set TX descriptor's address for a specific queue. For 5210 we ignore + * the queue number and we use tx queue type since we only have 2 queues + * so as above we use TXDP0 for normal data queue and TXDP1 for beacon queue. + * For newer chips with QCU/DCU we just set the corresponding TXDP register. + * Returns -EINVAL if queue type is invalid for 5210 and -EIO if queue is still + * active. + */ +int ath5k_hw_set_txdp(struct ath5k_hw *ah, unsigned int queue, u32 phys_addr) +{ + u16 tx_reg; + + ATH5K_TRACE(ah->ah_sc); + AR5K_ASSERT_ENTRY(queue, ah->ah_capabilities.cap_queues.q_tx_num); + + /* + * Set the transmit queue descriptor pointer register by type + * on 5210 + */ + if (ah->ah_version == AR5K_AR5210) { + switch (ah->ah_txq[queue].tqi_type) { + case AR5K_TX_QUEUE_DATA: + tx_reg = AR5K_NOQCU_TXDP0; + break; + case AR5K_TX_QUEUE_BEACON: + case AR5K_TX_QUEUE_CAB: + tx_reg = AR5K_NOQCU_TXDP1; + break; + default: + return -EINVAL; + } + } else { + /* + * Set the transmit queue descriptor pointer for + * the selected queue on QCU for 5211+ + * (this won't work if the queue is still active) + */ + if (AR5K_REG_READ_Q(ah, AR5K_QCU_TXE, queue)) + return -EIO; + + tx_reg = AR5K_QUEUE_TXDP(queue); + } + + /* Set descriptor pointer */ + ath5k_hw_reg_write(ah, phys_addr, tx_reg); + + return 0; +} + +/** + * ath5k_hw_update_tx_triglevel - Update tx trigger level + * + * @ah: The &struct ath5k_hw + * @increase: Flag to force increase of trigger level + * + * This function increases/decreases the tx trigger level for the tx fifo + * buffer (aka FIFO threshold) that is used to indicate when PCU flushes + * the buffer and transmits it's data. Lowering this results sending small + * frames more quickly but can lead to tx underruns, raising it a lot can + * result other problems (i think bmiss is related). Right now we start with + * the lowest possible (64Bytes) and if we get tx underrun we increase it using + * the increase flag. Returns -EIO if we have have reached maximum/minimum. + * + * XXX: Link this with tx DMA size ? + * XXX: Use it to save interrupts ? + * TODO: Needs testing, i think it's related to bmiss... + */ +int ath5k_hw_update_tx_triglevel(struct ath5k_hw *ah, bool increase) +{ + u32 trigger_level, imr; + int ret = -EIO; + + ATH5K_TRACE(ah->ah_sc); + + /* + * Disable interrupts by setting the mask + */ + imr = ath5k_hw_set_imr(ah, ah->ah_imr & ~AR5K_INT_GLOBAL); + + trigger_level = AR5K_REG_MS(ath5k_hw_reg_read(ah, AR5K_TXCFG), + AR5K_TXCFG_TXFULL); + + if (!increase) { + if (--trigger_level < AR5K_TUNE_MIN_TX_FIFO_THRES) + goto done; + } else + trigger_level += + ((AR5K_TUNE_MAX_TX_FIFO_THRES - trigger_level) / 2); + + /* + * Update trigger level on success + */ + if (ah->ah_version == AR5K_AR5210) + ath5k_hw_reg_write(ah, trigger_level, AR5K_TRIG_LVL); + else + AR5K_REG_WRITE_BITS(ah, AR5K_TXCFG, + AR5K_TXCFG_TXFULL, trigger_level); + + ret = 0; + +done: + /* + * Restore interrupt mask + */ + ath5k_hw_set_imr(ah, imr); + + return ret; +} + +/*******************\ +* Interrupt masking * +\*******************/ + +/** + * ath5k_hw_is_intr_pending - Check if we have pending interrupts + * + * @ah: The &struct ath5k_hw + * + * Check if we have pending interrupts to process. Returns 1 if we + * have pending interrupts and 0 if we haven't. + */ +bool ath5k_hw_is_intr_pending(struct ath5k_hw *ah) +{ + ATH5K_TRACE(ah->ah_sc); + return ath5k_hw_reg_read(ah, AR5K_INTPEND); +} + +/** + * ath5k_hw_get_isr - Get interrupt status + * + * @ah: The @struct ath5k_hw + * @interrupt_mask: Driver's interrupt mask used to filter out + * interrupts in sw. + * + * This function is used inside our interrupt handler to determine the reason + * for the interrupt by reading Primary Interrupt Status Register. Returns an + * abstract interrupt status mask which is mostly ISR with some uncommon bits + * being mapped on some standard non hw-specific positions + * (check out &ath5k_int). + * + * NOTE: We use read-and-clear register, so after this function is called ISR + * is zeroed. + * + * XXX: Why filter interrupts in sw with interrupt_mask ? No benefit at all + * plus it can be misleading (one might thing that we save interrupts this way) + */ +int ath5k_hw_get_isr(struct ath5k_hw *ah, enum ath5k_int *interrupt_mask) +{ + u32 data; + + ATH5K_TRACE(ah->ah_sc); + + /* + * Read interrupt status from the Interrupt Status register + * on 5210 + */ + if (ah->ah_version == AR5K_AR5210) { + data = ath5k_hw_reg_read(ah, AR5K_ISR); + if (unlikely(data == AR5K_INT_NOCARD)) { + *interrupt_mask = data; + return -ENODEV; + } + } else { + /* + * Read interrupt status from the Read-And-Clear + * shadow register. + * Note: PISR/SISR Not available on 5210 + */ + data = ath5k_hw_reg_read(ah, AR5K_RAC_PISR); + } + + /* + * Get abstract interrupt mask (driver-compatible) + */ + *interrupt_mask = (data & AR5K_INT_COMMON) & ah->ah_imr; + + if (unlikely(data == AR5K_INT_NOCARD)) + return -ENODEV; + + if (data & (AR5K_ISR_RXOK | AR5K_ISR_RXERR)) + *interrupt_mask |= AR5K_INT_RX; + + if (data & (AR5K_ISR_TXOK | AR5K_ISR_TXERR + | AR5K_ISR_TXDESC | AR5K_ISR_TXEOL)) + *interrupt_mask |= AR5K_INT_TX; + + if (ah->ah_version != AR5K_AR5210) { + /*HIU = Host Interface Unit (PCI etc)*/ + if (unlikely(data & (AR5K_ISR_HIUERR))) + *interrupt_mask |= AR5K_INT_FATAL; + + /*Beacon Not Ready*/ + if (unlikely(data & (AR5K_ISR_BNR))) + *interrupt_mask |= AR5K_INT_BNR; + } + + /* + * XXX: BMISS interrupts may occur after association. + * I found this on 5210 code but it needs testing. If this is + * true we should disable them before assoc and re-enable them + * after a successfull assoc + some jiffies. + */ +#if 0 + interrupt_mask &= ~AR5K_INT_BMISS; +#endif + + /* + * In case we didn't handle anything, + * print the register value. + */ + if (unlikely(*interrupt_mask == 0 && net_ratelimit())) + ATH5K_PRINTF("0x%08x\n", data); + + return 0; +} + +/** + * ath5k_hw_set_imr - Set interrupt mask + * + * @ah: The &struct ath5k_hw + * @new_mask: The new interrupt mask to be set + * + * Set the interrupt mask in hw to save interrupts. We do that by mapping + * ath5k_int bits to hw-specific bits to remove abstraction and writing + * Interrupt Mask Register. + */ +enum ath5k_int ath5k_hw_set_imr(struct ath5k_hw *ah, enum ath5k_int new_mask) +{ + enum ath5k_int old_mask, int_mask; + + /* + * Disable card interrupts to prevent any race conditions + * (they will be re-enabled afterwards). + */ + ath5k_hw_reg_write(ah, AR5K_IER_DISABLE, AR5K_IER); + ath5k_hw_reg_read(ah, AR5K_IER); + + old_mask = ah->ah_imr; + + /* + * Add additional, chipset-dependent interrupt mask flags + * and write them to the IMR (interrupt mask register). + */ + int_mask = new_mask & AR5K_INT_COMMON; + + if (new_mask & AR5K_INT_RX) + int_mask |= AR5K_IMR_RXOK | AR5K_IMR_RXERR | AR5K_IMR_RXORN | + AR5K_IMR_RXDESC; + + if (new_mask & AR5K_INT_TX) + int_mask |= AR5K_IMR_TXOK | AR5K_IMR_TXERR | AR5K_IMR_TXDESC | + AR5K_IMR_TXURN; + + if (ah->ah_version != AR5K_AR5210) { + if (new_mask & AR5K_INT_FATAL) { + int_mask |= AR5K_IMR_HIUERR; + AR5K_REG_ENABLE_BITS(ah, AR5K_SIMR2, AR5K_SIMR2_MCABT | + AR5K_SIMR2_SSERR | AR5K_SIMR2_DPERR); + } + } + + ath5k_hw_reg_write(ah, int_mask, AR5K_PIMR); + + /* Store new interrupt mask */ + ah->ah_imr = new_mask; + + /* ..re-enable interrupts */ + ath5k_hw_reg_write(ah, AR5K_IER_ENABLE, AR5K_IER); + ath5k_hw_reg_read(ah, AR5K_IER); + + return old_mask; +} + diff --git a/drivers/net/wireless/ath5k/eeprom.c b/drivers/net/wireless/ath5k/eeprom.c new file mode 100644 index 00000000000..a883839b6a9 --- /dev/null +++ b/drivers/net/wireless/ath5k/eeprom.c @@ -0,0 +1,466 @@ +/* + * Copyright (c) 2004-2008 Reyk Floeter <reyk@openbsd.org> + * Copyright (c) 2006-2008 Nick Kossifidis <mickflemm@gmail.com> + * + * Permission to use, copy, modify, and distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * + */ + +/*************************************\ +* EEPROM access functions and helpers * +\*************************************/ + +#include "ath5k.h" +#include "reg.h" +#include "debug.h" +#include "base.h" + +/* + * Read from eeprom + */ +static int ath5k_hw_eeprom_read(struct ath5k_hw *ah, u32 offset, u16 *data) +{ + u32 status, timeout; + + ATH5K_TRACE(ah->ah_sc); + /* + * Initialize EEPROM access + */ + if (ah->ah_version == AR5K_AR5210) { + AR5K_REG_ENABLE_BITS(ah, AR5K_PCICFG, AR5K_PCICFG_EEAE); + (void)ath5k_hw_reg_read(ah, AR5K_EEPROM_BASE + (4 * offset)); + } else { + ath5k_hw_reg_write(ah, offset, AR5K_EEPROM_BASE); + AR5K_REG_ENABLE_BITS(ah, AR5K_EEPROM_CMD, + AR5K_EEPROM_CMD_READ); + } + + for (timeout = AR5K_TUNE_REGISTER_TIMEOUT; timeout > 0; timeout--) { + status = ath5k_hw_reg_read(ah, AR5K_EEPROM_STATUS); + if (status & AR5K_EEPROM_STAT_RDDONE) { + if (status & AR5K_EEPROM_STAT_RDERR) + return -EIO; + *data = (u16)(ath5k_hw_reg_read(ah, AR5K_EEPROM_DATA) & + 0xffff); + return 0; + } + udelay(15); + } + + return -ETIMEDOUT; +} + +/* + * Translate binary channel representation in EEPROM to frequency + */ +static u16 ath5k_eeprom_bin2freq(struct ath5k_hw *ah, u16 bin, + unsigned int mode) +{ + u16 val; + + if (bin == AR5K_EEPROM_CHANNEL_DIS) + return bin; + + if (mode == AR5K_EEPROM_MODE_11A) { + if (ah->ah_ee_version > AR5K_EEPROM_VERSION_3_2) + val = (5 * bin) + 4800; + else + val = bin > 62 ? (10 * 62) + (5 * (bin - 62)) + 5100 : + (bin * 10) + 5100; + } else { + if (ah->ah_ee_version > AR5K_EEPROM_VERSION_3_2) + val = bin + 2300; + else + val = bin + 2400; + } + + return val; +} + +/* + * Read antenna infos from eeprom + */ +static int ath5k_eeprom_read_ants(struct ath5k_hw *ah, u32 *offset, + unsigned int mode) +{ + struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; + u32 o = *offset; + u16 val; + int ret, i = 0; + + AR5K_EEPROM_READ(o++, val); + ee->ee_switch_settling[mode] = (val >> 8) & 0x7f; + ee->ee_ant_tx_rx[mode] = (val >> 2) & 0x3f; + ee->ee_ant_control[mode][i] = (val << 4) & 0x3f; + + AR5K_EEPROM_READ(o++, val); + ee->ee_ant_control[mode][i++] |= (val >> 12) & 0xf; + ee->ee_ant_control[mode][i++] = (val >> 6) & 0x3f; + ee->ee_ant_control[mode][i++] = val & 0x3f; + + AR5K_EEPROM_READ(o++, val); + ee->ee_ant_control[mode][i++] = (val >> 10) & 0x3f; + ee->ee_ant_control[mode][i++] = (val >> 4) & 0x3f; + ee->ee_ant_control[mode][i] = (val << 2) & 0x3f; + + AR5K_EEPROM_READ(o++, val); + ee->ee_ant_control[mode][i++] |= (val >> 14) & 0x3; + ee->ee_ant_control[mode][i++] = (val >> 8) & 0x3f; + ee->ee_ant_control[mode][i++] = (val >> 2) & 0x3f; + ee->ee_ant_control[mode][i] = (val << 4) & 0x3f; + + AR5K_EEPROM_READ(o++, val); + ee->ee_ant_control[mode][i++] |= (val >> 12) & 0xf; + ee->ee_ant_control[mode][i++] = (val >> 6) & 0x3f; + ee->ee_ant_control[mode][i++] = val & 0x3f; + + /* Get antenna modes */ + ah->ah_antenna[mode][0] = + (ee->ee_ant_control[mode][0] << 4) | 0x1; + ah->ah_antenna[mode][AR5K_ANT_FIXED_A] = + ee->ee_ant_control[mode][1] | + (ee->ee_ant_control[mode][2] << 6) | + (ee->ee_ant_control[mode][3] << 12) | + (ee->ee_ant_control[mode][4] << 18) | + (ee->ee_ant_control[mode][5] << 24); + ah->ah_antenna[mode][AR5K_ANT_FIXED_B] = + ee->ee_ant_control[mode][6] | + (ee->ee_ant_control[mode][7] << 6) | + (ee->ee_ant_control[mode][8] << 12) | + (ee->ee_ant_control[mode][9] << 18) | + (ee->ee_ant_control[mode][10] << 24); + + /* return new offset */ + *offset = o; + + return 0; +} + +/* + * Read supported modes from eeprom + */ +static int ath5k_eeprom_read_modes(struct ath5k_hw *ah, u32 *offset, + unsigned int mode) +{ + struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; + u32 o = *offset; + u16 val; + int ret; + + AR5K_EEPROM_READ(o++, val); + ee->ee_tx_end2xlna_enable[mode] = (val >> 8) & 0xff; + ee->ee_thr_62[mode] = val & 0xff; + + if (ah->ah_ee_version <= AR5K_EEPROM_VERSION_3_2) + ee->ee_thr_62[mode] = mode == AR5K_EEPROM_MODE_11A ? 15 : 28; + + AR5K_EEPROM_READ(o++, val); + ee->ee_tx_end2xpa_disable[mode] = (val >> 8) & 0xff; + ee->ee_tx_frm2xpa_enable[mode] = val & 0xff; + + AR5K_EEPROM_READ(o++, val); + ee->ee_pga_desired_size[mode] = (val >> 8) & 0xff; + + if ((val & 0xff) & 0x80) + ee->ee_noise_floor_thr[mode] = -((((val & 0xff) ^ 0xff)) + 1); + else + ee->ee_noise_floor_thr[mode] = val & 0xff; + + if (ah->ah_ee_version <= AR5K_EEPROM_VERSION_3_2) + ee->ee_noise_floor_thr[mode] = + mode == AR5K_EEPROM_MODE_11A ? -54 : -1; + + AR5K_EEPROM_READ(o++, val); + ee->ee_xlna_gain[mode] = (val >> 5) & 0xff; + ee->ee_x_gain[mode] = (val >> 1) & 0xf; + ee->ee_xpd[mode] = val & 0x1; + + if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_0) + ee->ee_fixed_bias[mode] = (val >> 13) & 0x1; + + if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_3_3) { + AR5K_EEPROM_READ(o++, val); + ee->ee_false_detect[mode] = (val >> 6) & 0x7f; + + if (mode == AR5K_EEPROM_MODE_11A) + ee->ee_xr_power[mode] = val & 0x3f; + else { + ee->ee_ob[mode][0] = val & 0x7; + ee->ee_db[mode][0] = (val >> 3) & 0x7; + } + } + + if (ah->ah_ee_version < AR5K_EEPROM_VERSION_3_4) { + ee->ee_i_gain[mode] = AR5K_EEPROM_I_GAIN; + ee->ee_cck_ofdm_power_delta = AR5K_EEPROM_CCK_OFDM_DELTA; + } else { + ee->ee_i_gain[mode] = (val >> 13) & 0x7; + + AR5K_EEPROM_READ(o++, val); + ee->ee_i_gain[mode] |= (val << 3) & 0x38; + + if (mode == AR5K_EEPROM_MODE_11G) + ee->ee_cck_ofdm_power_delta = (val >> 3) & 0xff; + } + + if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_0 && + mode == AR5K_EEPROM_MODE_11A) { + ee->ee_i_cal[mode] = (val >> 8) & 0x3f; + ee->ee_q_cal[mode] = (val >> 3) & 0x1f; + } + + if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_6 && + mode == AR5K_EEPROM_MODE_11G) + ee->ee_scaled_cck_delta = (val >> 11) & 0x1f; + + /* return new offset */ + *offset = o; + + return 0; +} + +/* + * Initialize eeprom & capabilities structs + */ +int ath5k_eeprom_init(struct ath5k_hw *ah) +{ + struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; + unsigned int mode, i; + int ret; + u32 offset; + u16 val; + + /* Initial TX thermal adjustment values */ + ee->ee_tx_clip = 4; + ee->ee_pwd_84 = ee->ee_pwd_90 = 1; + ee->ee_gain_select = 1; + + /* + * Read values from EEPROM and store them in the capability structure + */ + AR5K_EEPROM_READ_HDR(AR5K_EEPROM_MAGIC, ee_magic); + AR5K_EEPROM_READ_HDR(AR5K_EEPROM_PROTECT, ee_protect); + AR5K_EEPROM_READ_HDR(AR5K_EEPROM_REG_DOMAIN, ee_regdomain); + AR5K_EEPROM_READ_HDR(AR5K_EEPROM_VERSION, ee_version); + AR5K_EEPROM_READ_HDR(AR5K_EEPROM_HDR, ee_header); + + /* Return if we have an old EEPROM */ + if (ah->ah_ee_version < AR5K_EEPROM_VERSION_3_0) + return 0; + +#ifdef notyet + /* + * Validate the checksum of the EEPROM date. There are some + * devices with invalid EEPROMs. + */ + for (cksum = 0, offset = 0; offset < AR5K_EEPROM_INFO_MAX; offset++) { + AR5K_EEPROM_READ(AR5K_EEPROM_INFO(offset), val); + cksum ^= val; + } + if (cksum != AR5K_EEPROM_INFO_CKSUM) { + ATH5K_ERR(ah->ah_sc, "Invalid EEPROM checksum 0x%04x\n", cksum); + return -EIO; + } +#endif + + AR5K_EEPROM_READ_HDR(AR5K_EEPROM_ANT_GAIN(ah->ah_ee_version), + ee_ant_gain); + + if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_0) { + AR5K_EEPROM_READ_HDR(AR5K_EEPROM_MISC0, ee_misc0); + AR5K_EEPROM_READ_HDR(AR5K_EEPROM_MISC1, ee_misc1); + } + + if (ah->ah_ee_version < AR5K_EEPROM_VERSION_3_3) { + AR5K_EEPROM_READ(AR5K_EEPROM_OBDB0_2GHZ, val); + ee->ee_ob[AR5K_EEPROM_MODE_11B][0] = val & 0x7; + ee->ee_db[AR5K_EEPROM_MODE_11B][0] = (val >> 3) & 0x7; + + AR5K_EEPROM_READ(AR5K_EEPROM_OBDB1_2GHZ, val); + ee->ee_ob[AR5K_EEPROM_MODE_11G][0] = val & 0x7; + ee->ee_db[AR5K_EEPROM_MODE_11G][0] = (val >> 3) & 0x7; + } + + /* + * Get conformance test limit values + */ + offset = AR5K_EEPROM_CTL(ah->ah_ee_version); + ee->ee_ctls = AR5K_EEPROM_N_CTLS(ah->ah_ee_version); + + for (i = 0; i < ee->ee_ctls; i++) { + AR5K_EEPROM_READ(offset++, val); + ee->ee_ctl[i] = (val >> 8) & 0xff; + ee->ee_ctl[i + 1] = val & 0xff; + } + + /* + * Get values for 802.11a (5GHz) + */ + mode = AR5K_EEPROM_MODE_11A; + + ee->ee_turbo_max_power[mode] = + AR5K_EEPROM_HDR_T_5GHZ_DBM(ee->ee_header); + + offset = AR5K_EEPROM_MODES_11A(ah->ah_ee_version); + + ret = ath5k_eeprom_read_ants(ah, &offset, mode); + if (ret) + return ret; + + AR5K_EEPROM_READ(offset++, val); + ee->ee_adc_desired_size[mode] = (s8)((val >> 8) & 0xff); + ee->ee_ob[mode][3] = (val >> 5) & 0x7; + ee->ee_db[mode][3] = (val >> 2) & 0x7; + ee->ee_ob[mode][2] = (val << 1) & 0x7; + + AR5K_EEPROM_READ(offset++, val); + ee->ee_ob[mode][2] |= (val >> 15) & 0x1; + ee->ee_db[mode][2] = (val >> 12) & 0x7; + ee->ee_ob[mode][1] = (val >> 9) & 0x7; + ee->ee_db[mode][1] = (val >> 6) & 0x7; + ee->ee_ob[mode][0] = (val >> 3) & 0x7; + ee->ee_db[mode][0] = val & 0x7; + + ret = ath5k_eeprom_read_modes(ah, &offset, mode); + if (ret) + return ret; + + if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_1) { + AR5K_EEPROM_READ(offset++, val); + ee->ee_margin_tx_rx[mode] = val & 0x3f; + } + + /* + * Get values for 802.11b (2.4GHz) + */ + mode = AR5K_EEPROM_MODE_11B; + offset = AR5K_EEPROM_MODES_11B(ah->ah_ee_version); + + ret = ath5k_eeprom_read_ants(ah, &offset, mode); + if (ret) + return ret; + + AR5K_EEPROM_READ(offset++, val); + ee->ee_adc_desired_size[mode] = (s8)((val >> 8) & 0xff); + ee->ee_ob[mode][1] = (val >> 4) & 0x7; + ee->ee_db[mode][1] = val & 0x7; + + ret = ath5k_eeprom_read_modes(ah, &offset, mode); + if (ret) + return ret; + + if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_0) { + AR5K_EEPROM_READ(offset++, val); + ee->ee_cal_pier[mode][0] = + ath5k_eeprom_bin2freq(ah, val & 0xff, mode); + ee->ee_cal_pier[mode][1] = + ath5k_eeprom_bin2freq(ah, (val >> 8) & 0xff, mode); + + AR5K_EEPROM_READ(offset++, val); + ee->ee_cal_pier[mode][2] = + ath5k_eeprom_bin2freq(ah, val & 0xff, mode); + } + + if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_1) + ee->ee_margin_tx_rx[mode] = (val >> 8) & 0x3f; + + /* + * Get values for 802.11g (2.4GHz) + */ + mode = AR5K_EEPROM_MODE_11G; + offset = AR5K_EEPROM_MODES_11G(ah->ah_ee_version); + + ret = ath5k_eeprom_read_ants(ah, &offset, mode); + if (ret) + return ret; + + AR5K_EEPROM_READ(offset++, val); + ee->ee_adc_desired_size[mode] = (s8)((val >> 8) & 0xff); + ee->ee_ob[mode][1] = (val >> 4) & 0x7; + ee->ee_db[mode][1] = val & 0x7; + + ret = ath5k_eeprom_read_modes(ah, &offset, mode); + if (ret) + return ret; + + if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_0) { + AR5K_EEPROM_READ(offset++, val); + ee->ee_cal_pier[mode][0] = + ath5k_eeprom_bin2freq(ah, val & 0xff, mode); + ee->ee_cal_pier[mode][1] = + ath5k_eeprom_bin2freq(ah, (val >> 8) & 0xff, mode); + + AR5K_EEPROM_READ(offset++, val); + ee->ee_turbo_max_power[mode] = val & 0x7f; + ee->ee_xr_power[mode] = (val >> 7) & 0x3f; + + AR5K_EEPROM_READ(offset++, val); + ee->ee_cal_pier[mode][2] = + ath5k_eeprom_bin2freq(ah, val & 0xff, mode); + + if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_1) + ee->ee_margin_tx_rx[mode] = (val >> 8) & 0x3f; + + AR5K_EEPROM_READ(offset++, val); + ee->ee_i_cal[mode] = (val >> 8) & 0x3f; + ee->ee_q_cal[mode] = (val >> 3) & 0x1f; + + if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_2) { + AR5K_EEPROM_READ(offset++, val); + ee->ee_cck_ofdm_gain_delta = val & 0xff; + } + } + + /* + * Read 5GHz EEPROM channels + */ + + return 0; +} + +/* + * Read the MAC address from eeprom + */ +int ath5k_eeprom_read_mac(struct ath5k_hw *ah, u8 *mac) +{ + u8 mac_d[ETH_ALEN]; + u32 total, offset; + u16 data; + int octet, ret; + + memset(mac, 0, ETH_ALEN); + memset(mac_d, 0, ETH_ALEN); + + ret = ath5k_hw_eeprom_read(ah, 0x20, &data); + if (ret) + return ret; + + for (offset = 0x1f, octet = 0, total = 0; offset >= 0x1d; offset--) { + ret = ath5k_hw_eeprom_read(ah, offset, &data); + if (ret) + return ret; + + total += data; + mac_d[octet + 1] = data & 0xff; + mac_d[octet] = data >> 8; + octet += 2; + } + + memcpy(mac, mac_d, ETH_ALEN); + + if (!total || total == 3 * 0xffff) + return -EINVAL; + + return 0; +} + diff --git a/drivers/net/wireless/ath5k/eeprom.h b/drivers/net/wireless/ath5k/eeprom.h new file mode 100644 index 00000000000..a468ecfbb18 --- /dev/null +++ b/drivers/net/wireless/ath5k/eeprom.h @@ -0,0 +1,215 @@ +/* + * Copyright (c) 2004-2008 Reyk Floeter <reyk@openbsd.org> + * Copyright (c) 2006-2008 Nick Kossifidis <mickflemm@gmail.com> + * + * Permission to use, copy, modify, and distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * + */ + +/* + * Common ar5xxx EEPROM data offsets (set these on AR5K_EEPROM_BASE) + */ +#define AR5K_EEPROM_MAGIC 0x003d /* EEPROM Magic number */ +#define AR5K_EEPROM_MAGIC_VALUE 0x5aa5 /* Default - found on EEPROM */ +#define AR5K_EEPROM_MAGIC_5212 0x0000145c /* 5212 */ +#define AR5K_EEPROM_MAGIC_5211 0x0000145b /* 5211 */ +#define AR5K_EEPROM_MAGIC_5210 0x0000145a /* 5210 */ + +#define AR5K_EEPROM_PROTECT 0x003f /* EEPROM protect status */ +#define AR5K_EEPROM_PROTECT_RD_0_31 0x0001 /* Read protection bit for offsets 0x0 - 0x1f */ +#define AR5K_EEPROM_PROTECT_WR_0_31 0x0002 /* Write protection bit for offsets 0x0 - 0x1f */ +#define AR5K_EEPROM_PROTECT_RD_32_63 0x0004 /* 0x20 - 0x3f */ +#define AR5K_EEPROM_PROTECT_WR_32_63 0x0008 +#define AR5K_EEPROM_PROTECT_RD_64_127 0x0010 /* 0x40 - 0x7f */ +#define AR5K_EEPROM_PROTECT_WR_64_127 0x0020 +#define AR5K_EEPROM_PROTECT_RD_128_191 0x0040 /* 0x80 - 0xbf (regdom) */ +#define AR5K_EEPROM_PROTECT_WR_128_191 0x0080 +#define AR5K_EEPROM_PROTECT_RD_192_207 0x0100 /* 0xc0 - 0xcf */ +#define AR5K_EEPROM_PROTECT_WR_192_207 0x0200 +#define AR5K_EEPROM_PROTECT_RD_208_223 0x0400 /* 0xd0 - 0xdf */ +#define AR5K_EEPROM_PROTECT_WR_208_223 0x0800 +#define AR5K_EEPROM_PROTECT_RD_224_239 0x1000 /* 0xe0 - 0xef */ +#define AR5K_EEPROM_PROTECT_WR_224_239 0x2000 +#define AR5K_EEPROM_PROTECT_RD_240_255 0x4000 /* 0xf0 - 0xff */ +#define AR5K_EEPROM_PROTECT_WR_240_255 0x8000 +#define AR5K_EEPROM_REG_DOMAIN 0x00bf /* EEPROM regdom */ +#define AR5K_EEPROM_INFO_BASE 0x00c0 /* EEPROM header */ +#define AR5K_EEPROM_INFO_MAX (0x400 - AR5K_EEPROM_INFO_BASE) +#define AR5K_EEPROM_INFO_CKSUM 0xffff +#define AR5K_EEPROM_INFO(_n) (AR5K_EEPROM_INFO_BASE + (_n)) + +#define AR5K_EEPROM_VERSION AR5K_EEPROM_INFO(1) /* EEPROM Version */ +#define AR5K_EEPROM_VERSION_3_0 0x3000 /* No idea what's going on before this version */ +#define AR5K_EEPROM_VERSION_3_1 0x3001 /* ob/db values for 2Ghz (ar5211_rfregs) */ +#define AR5K_EEPROM_VERSION_3_2 0x3002 /* different frequency representation (eeprom_bin2freq) */ +#define AR5K_EEPROM_VERSION_3_3 0x3003 /* offsets changed, has 32 CTLs (see below) and ee_false_detect (eeprom_read_modes) */ +#define AR5K_EEPROM_VERSION_3_4 0x3004 /* has ee_i_gain ee_cck_ofdm_power_delta (eeprom_read_modes) */ +#define AR5K_EEPROM_VERSION_4_0 0x4000 /* has ee_misc*, ee_cal_pier, ee_turbo_max_power and ee_xr_power (eeprom_init) */ +#define AR5K_EEPROM_VERSION_4_1 0x4001 /* has ee_margin_tx_rx (eeprom_init) */ +#define AR5K_EEPROM_VERSION_4_2 0x4002 /* has ee_cck_ofdm_gain_delta (eeprom_init) */ +#define AR5K_EEPROM_VERSION_4_3 0x4003 +#define AR5K_EEPROM_VERSION_4_4 0x4004 +#define AR5K_EEPROM_VERSION_4_5 0x4005 +#define AR5K_EEPROM_VERSION_4_6 0x4006 /* has ee_scaled_cck_delta */ +#define AR5K_EEPROM_VERSION_4_7 0x4007 + +#define AR5K_EEPROM_MODE_11A 0 +#define AR5K_EEPROM_MODE_11B 1 +#define AR5K_EEPROM_MODE_11G 2 + +#define AR5K_EEPROM_HDR AR5K_EEPROM_INFO(2) /* Header that contains the device caps */ +#define AR5K_EEPROM_HDR_11A(_v) (((_v) >> AR5K_EEPROM_MODE_11A) & 0x1) +#define AR5K_EEPROM_HDR_11B(_v) (((_v) >> AR5K_EEPROM_MODE_11B) & 0x1) +#define AR5K_EEPROM_HDR_11G(_v) (((_v) >> AR5K_EEPROM_MODE_11G) & 0x1) +#define AR5K_EEPROM_HDR_T_2GHZ_DIS(_v) (((_v) >> 3) & 0x1) /* Disable turbo for 2Ghz (?) */ +#define AR5K_EEPROM_HDR_T_5GHZ_DBM(_v) (((_v) >> 4) & 0x7f) /* Max turbo power for a/XR mode (eeprom_init) */ +#define AR5K_EEPROM_HDR_DEVICE(_v) (((_v) >> 11) & 0x7) +#define AR5K_EEPROM_HDR_T_5GHZ_DIS(_v) (((_v) >> 15) & 0x1) /* Disable turbo for 5Ghz (?) */ +#define AR5K_EEPROM_HDR_RFKILL(_v) (((_v) >> 14) & 0x1) /* Device has RFKill support */ + +#define AR5K_EEPROM_RFKILL_GPIO_SEL 0x0000001c +#define AR5K_EEPROM_RFKILL_GPIO_SEL_S 2 +#define AR5K_EEPROM_RFKILL_POLARITY 0x00000002 +#define AR5K_EEPROM_RFKILL_POLARITY_S 1 + +/* Newer EEPROMs are using a different offset */ +#define AR5K_EEPROM_OFF(_v, _v3_0, _v3_3) \ + (((_v) >= AR5K_EEPROM_VERSION_3_3) ? _v3_3 : _v3_0) + +#define AR5K_EEPROM_ANT_GAIN(_v) AR5K_EEPROM_OFF(_v, 0x00c4, 0x00c3) +#define AR5K_EEPROM_ANT_GAIN_5GHZ(_v) ((int8_t)(((_v) >> 8) & 0xff)) +#define AR5K_EEPROM_ANT_GAIN_2GHZ(_v) ((int8_t)((_v) & 0xff)) + +/* calibration settings */ +#define AR5K_EEPROM_MODES_11A(_v) AR5K_EEPROM_OFF(_v, 0x00c5, 0x00d4) +#define AR5K_EEPROM_MODES_11B(_v) AR5K_EEPROM_OFF(_v, 0x00d0, 0x00f2) +#define AR5K_EEPROM_MODES_11G(_v) AR5K_EEPROM_OFF(_v, 0x00da, 0x010d) +#define AR5K_EEPROM_CTL(_v) AR5K_EEPROM_OFF(_v, 0x00e4, 0x0128) /* Conformance test limits */ + +/* [3.1 - 3.3] */ +#define AR5K_EEPROM_OBDB0_2GHZ 0x00ec +#define AR5K_EEPROM_OBDB1_2GHZ 0x00ed + +/* Misc values available since EEPROM 4.0 */ +#define AR5K_EEPROM_MISC0 0x00c4 +#define AR5K_EEPROM_EARSTART(_v) ((_v) & 0xfff) +#define AR5K_EEPROM_EEMAP(_v) (((_v) >> 14) & 0x3) +#define AR5K_EEPROM_MISC1 0x00c5 +#define AR5K_EEPROM_TARGET_PWRSTART(_v) ((_v) & 0xfff) +#define AR5K_EEPROM_HAS32KHZCRYSTAL(_v) (((_v) >> 14) & 0x1) + + +/* Some EEPROM defines */ +#define AR5K_EEPROM_EEP_SCALE 100 +#define AR5K_EEPROM_EEP_DELTA 10 +#define AR5K_EEPROM_N_MODES 3 +#define AR5K_EEPROM_N_5GHZ_CHAN 10 +#define AR5K_EEPROM_N_2GHZ_CHAN 3 +#define AR5K_EEPROM_MAX_CHAN 10 +#define AR5K_EEPROM_N_PCDAC 11 +#define AR5K_EEPROM_N_TEST_FREQ 8 +#define AR5K_EEPROM_N_EDGES 8 +#define AR5K_EEPROM_N_INTERCEPTS 11 +#define AR5K_EEPROM_FREQ_M(_v) AR5K_EEPROM_OFF(_v, 0x7f, 0xff) +#define AR5K_EEPROM_PCDAC_M 0x3f +#define AR5K_EEPROM_PCDAC_START 1 +#define AR5K_EEPROM_PCDAC_STOP 63 +#define AR5K_EEPROM_PCDAC_STEP 1 +#define AR5K_EEPROM_NON_EDGE_M 0x40 +#define AR5K_EEPROM_CHANNEL_POWER 8 +#define AR5K_EEPROM_N_OBDB 4 +#define AR5K_EEPROM_OBDB_DIS 0xffff +#define AR5K_EEPROM_CHANNEL_DIS 0xff +#define AR5K_EEPROM_SCALE_OC_DELTA(_x) (((_x) * 2) / 10) +#define AR5K_EEPROM_N_CTLS(_v) AR5K_EEPROM_OFF(_v, 16, 32) +#define AR5K_EEPROM_MAX_CTLS 32 +#define AR5K_EEPROM_N_XPD_PER_CHANNEL 4 +#define AR5K_EEPROM_N_XPD0_POINTS 4 +#define AR5K_EEPROM_N_XPD3_POINTS 3 +#define AR5K_EEPROM_N_INTERCEPT_10_2GHZ 35 +#define AR5K_EEPROM_N_INTERCEPT_10_5GHZ 55 +#define AR5K_EEPROM_POWER_M 0x3f +#define AR5K_EEPROM_POWER_MIN 0 +#define AR5K_EEPROM_POWER_MAX 3150 +#define AR5K_EEPROM_POWER_STEP 50 +#define AR5K_EEPROM_POWER_TABLE_SIZE 64 +#define AR5K_EEPROM_N_POWER_LOC_11B 4 +#define AR5K_EEPROM_N_POWER_LOC_11G 6 +#define AR5K_EEPROM_I_GAIN 10 +#define AR5K_EEPROM_CCK_OFDM_DELTA 15 +#define AR5K_EEPROM_N_IQ_CAL 2 + +#define AR5K_EEPROM_READ(_o, _v) do { \ + ret = ath5k_hw_eeprom_read(ah, (_o), &(_v)); \ + if (ret) \ + return ret; \ +} while (0) + +#define AR5K_EEPROM_READ_HDR(_o, _v) \ + AR5K_EEPROM_READ(_o, ah->ah_capabilities.cap_eeprom._v); \ + +/* Struct to hold EEPROM calibration data */ +struct ath5k_eeprom_info { + u16 ee_magic; + u16 ee_protect; + u16 ee_regdomain; + u16 ee_version; + u16 ee_header; + u16 ee_ant_gain; + u16 ee_misc0; + u16 ee_misc1; + u16 ee_cck_ofdm_gain_delta; + u16 ee_cck_ofdm_power_delta; + u16 ee_scaled_cck_delta; + + /* Used for tx thermal adjustment (eeprom_init, rfregs) */ + u16 ee_tx_clip; + u16 ee_pwd_84; + u16 ee_pwd_90; + u16 ee_gain_select; + + /* RF Calibration settings (reset, rfregs) */ + u16 ee_i_cal[AR5K_EEPROM_N_MODES]; + u16 ee_q_cal[AR5K_EEPROM_N_MODES]; + u16 ee_fixed_bias[AR5K_EEPROM_N_MODES]; + u16 ee_turbo_max_power[AR5K_EEPROM_N_MODES]; + u16 ee_xr_power[AR5K_EEPROM_N_MODES]; + u16 ee_switch_settling[AR5K_EEPROM_N_MODES]; + u16 ee_ant_tx_rx[AR5K_EEPROM_N_MODES]; + u16 ee_ant_control[AR5K_EEPROM_N_MODES][AR5K_EEPROM_N_PCDAC]; + u16 ee_ob[AR5K_EEPROM_N_MODES][AR5K_EEPROM_N_OBDB]; + u16 ee_db[AR5K_EEPROM_N_MODES][AR5K_EEPROM_N_OBDB]; + u16 ee_tx_end2xlna_enable[AR5K_EEPROM_N_MODES]; + u16 ee_tx_end2xpa_disable[AR5K_EEPROM_N_MODES]; + u16 ee_tx_frm2xpa_enable[AR5K_EEPROM_N_MODES]; + u16 ee_thr_62[AR5K_EEPROM_N_MODES]; + u16 ee_xlna_gain[AR5K_EEPROM_N_MODES]; + u16 ee_xpd[AR5K_EEPROM_N_MODES]; + u16 ee_x_gain[AR5K_EEPROM_N_MODES]; + u16 ee_i_gain[AR5K_EEPROM_N_MODES]; + u16 ee_margin_tx_rx[AR5K_EEPROM_N_MODES]; + + /* Unused */ + u16 ee_false_detect[AR5K_EEPROM_N_MODES]; + u16 ee_cal_pier[AR5K_EEPROM_N_MODES][AR5K_EEPROM_N_2GHZ_CHAN]; + u16 ee_channel[AR5K_EEPROM_N_MODES][AR5K_EEPROM_MAX_CHAN]; /*empty*/ + + /* Conformance test limits (Unused) */ + u16 ee_ctls; + u16 ee_ctl[AR5K_EEPROM_MAX_CTLS]; + + /* Noise Floor Calibration settings */ + s16 ee_noise_floor_thr[AR5K_EEPROM_N_MODES]; + s8 ee_adc_desired_size[AR5K_EEPROM_N_MODES]; + s8 ee_pga_desired_size[AR5K_EEPROM_N_MODES]; +}; diff --git a/drivers/net/wireless/ath5k/gpio.c b/drivers/net/wireless/ath5k/gpio.c new file mode 100644 index 00000000000..b77205adc18 --- /dev/null +++ b/drivers/net/wireless/ath5k/gpio.c @@ -0,0 +1,176 @@ +/* + * Copyright (c) 2004-2008 Reyk Floeter <reyk@openbsd.org> + * Copyright (c) 2006-2008 Nick Kossifidis <mickflemm@gmail.com> + * + * Permission to use, copy, modify, and distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * + */ + +/****************\ + GPIO Functions +\****************/ + +#include "ath5k.h" +#include "reg.h" +#include "debug.h" +#include "base.h" + +/* + * Set led state + */ +void ath5k_hw_set_ledstate(struct ath5k_hw *ah, unsigned int state) +{ + u32 led; + /*5210 has different led mode handling*/ + u32 led_5210; + + ATH5K_TRACE(ah->ah_sc); + + /*Reset led status*/ + if (ah->ah_version != AR5K_AR5210) + AR5K_REG_DISABLE_BITS(ah, AR5K_PCICFG, + AR5K_PCICFG_LEDMODE | AR5K_PCICFG_LED); + else + AR5K_REG_DISABLE_BITS(ah, AR5K_PCICFG, AR5K_PCICFG_LED); + + /* + * Some blinking values, define at your wish + */ + switch (state) { + case AR5K_LED_SCAN: + case AR5K_LED_AUTH: + led = AR5K_PCICFG_LEDMODE_PROP | AR5K_PCICFG_LED_PEND; + led_5210 = AR5K_PCICFG_LED_PEND | AR5K_PCICFG_LED_BCTL; + break; + + case AR5K_LED_INIT: + led = AR5K_PCICFG_LEDMODE_PROP | AR5K_PCICFG_LED_NONE; + led_5210 = AR5K_PCICFG_LED_PEND; + break; + + case AR5K_LED_ASSOC: + case AR5K_LED_RUN: + led = AR5K_PCICFG_LEDMODE_PROP | AR5K_PCICFG_LED_ASSOC; + led_5210 = AR5K_PCICFG_LED_ASSOC; + break; + + default: + led = AR5K_PCICFG_LEDMODE_PROM | AR5K_PCICFG_LED_NONE; + led_5210 = AR5K_PCICFG_LED_PEND; + break; + } + + /*Write new status to the register*/ + if (ah->ah_version != AR5K_AR5210) + AR5K_REG_ENABLE_BITS(ah, AR5K_PCICFG, led); + else + AR5K_REG_ENABLE_BITS(ah, AR5K_PCICFG, led_5210); +} + +/* + * Set GPIO inputs + */ +int ath5k_hw_set_gpio_input(struct ath5k_hw *ah, u32 gpio) +{ + ATH5K_TRACE(ah->ah_sc); + if (gpio > AR5K_NUM_GPIO) + return -EINVAL; + + ath5k_hw_reg_write(ah, + (ath5k_hw_reg_read(ah, AR5K_GPIOCR) & ~AR5K_GPIOCR_OUT(gpio)) + | AR5K_GPIOCR_IN(gpio), AR5K_GPIOCR); + + return 0; +} + +/* + * Set GPIO outputs + */ +int ath5k_hw_set_gpio_output(struct ath5k_hw *ah, u32 gpio) +{ + ATH5K_TRACE(ah->ah_sc); + if (gpio > AR5K_NUM_GPIO) + return -EINVAL; + + ath5k_hw_reg_write(ah, + (ath5k_hw_reg_read(ah, AR5K_GPIOCR) & ~AR5K_GPIOCR_OUT(gpio)) + | AR5K_GPIOCR_OUT(gpio), AR5K_GPIOCR); + + return 0; +} + +/* + * Get GPIO state + */ +u32 ath5k_hw_get_gpio(struct ath5k_hw *ah, u32 gpio) +{ + ATH5K_TRACE(ah->ah_sc); + if (gpio > AR5K_NUM_GPIO) + return 0xffffffff; + + /* GPIO input magic */ + return ((ath5k_hw_reg_read(ah, AR5K_GPIODI) & AR5K_GPIODI_M) >> gpio) & + 0x1; +} + +/* + * Set GPIO state + */ +int ath5k_hw_set_gpio(struct ath5k_hw *ah, u32 gpio, u32 val) +{ + u32 data; + ATH5K_TRACE(ah->ah_sc); + + if (gpio > AR5K_NUM_GPIO) + return -EINVAL; + + /* GPIO output magic */ + data = ath5k_hw_reg_read(ah, AR5K_GPIODO); + + data &= ~(1 << gpio); + data |= (val & 1) << gpio; + + ath5k_hw_reg_write(ah, data, AR5K_GPIODO); + + return 0; +} + +/* + * Initialize the GPIO interrupt (RFKill switch) + */ +void ath5k_hw_set_gpio_intr(struct ath5k_hw *ah, unsigned int gpio, + u32 interrupt_level) +{ + u32 data; + + ATH5K_TRACE(ah->ah_sc); + if (gpio > AR5K_NUM_GPIO) + return; + + /* + * Set the GPIO interrupt + */ + data = (ath5k_hw_reg_read(ah, AR5K_GPIOCR) & + ~(AR5K_GPIOCR_INT_SEL(gpio) | AR5K_GPIOCR_INT_SELH | + AR5K_GPIOCR_INT_ENA | AR5K_GPIOCR_OUT(gpio))) | + (AR5K_GPIOCR_INT_SEL(gpio) | AR5K_GPIOCR_INT_ENA); + + ath5k_hw_reg_write(ah, interrupt_level ? data : + (data | AR5K_GPIOCR_INT_SELH), AR5K_GPIOCR); + + ah->ah_imr |= AR5K_IMR_GPIO; + + /* Enable GPIO interrupts */ + AR5K_REG_ENABLE_BITS(ah, AR5K_PIMR, AR5K_IMR_GPIO); +} + diff --git a/drivers/net/wireless/ath5k/hw.c b/drivers/net/wireless/ath5k/hw.c deleted file mode 100644 index ad1a5b422c8..00000000000 --- a/drivers/net/wireless/ath5k/hw.c +++ /dev/null @@ -1,4529 +0,0 @@ -/* - * Copyright (c) 2004-2007 Reyk Floeter <reyk@openbsd.org> - * Copyright (c) 2006-2007 Nick Kossifidis <mickflemm@gmail.com> - * Copyright (c) 2007 Matthew W. S. Bell <mentor@madwifi.org> - * Copyright (c) 2007 Luis Rodriguez <mcgrof@winlab.rutgers.edu> - * Copyright (c) 2007 Pavel Roskin <proski@gnu.org> - * Copyright (c) 2007 Jiri Slaby <jirislaby@gmail.com> - * - * Permission to use, copy, modify, and distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR - * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN - * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF - * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - * - */ - -/* - * HW related functions for Atheros Wireless LAN devices. - */ - -#include <linux/pci.h> -#include <linux/delay.h> - -#include "reg.h" -#include "base.h" -#include "debug.h" - -/* Rate tables */ -static const struct ath5k_rate_table ath5k_rt_11a = AR5K_RATES_11A; -static const struct ath5k_rate_table ath5k_rt_11b = AR5K_RATES_11B; -static const struct ath5k_rate_table ath5k_rt_11g = AR5K_RATES_11G; -static const struct ath5k_rate_table ath5k_rt_turbo = AR5K_RATES_TURBO; -static const struct ath5k_rate_table ath5k_rt_xr = AR5K_RATES_XR; - -/* Prototypes */ -static int ath5k_hw_nic_reset(struct ath5k_hw *, u32); -static int ath5k_hw_nic_wakeup(struct ath5k_hw *, int, bool); -static int ath5k_hw_setup_4word_tx_desc(struct ath5k_hw *, struct ath5k_desc *, - unsigned int, unsigned int, enum ath5k_pkt_type, unsigned int, - unsigned int, unsigned int, unsigned int, unsigned int, unsigned int, - unsigned int, unsigned int); -static int ath5k_hw_setup_xr_tx_desc(struct ath5k_hw *, struct ath5k_desc *, - unsigned int, unsigned int, unsigned int, unsigned int, unsigned int, - unsigned int); -static int ath5k_hw_proc_4word_tx_status(struct ath5k_hw *, struct ath5k_desc *, - struct ath5k_tx_status *); -static int ath5k_hw_setup_2word_tx_desc(struct ath5k_hw *, struct ath5k_desc *, - unsigned int, unsigned int, enum ath5k_pkt_type, unsigned int, - unsigned int, unsigned int, unsigned int, unsigned int, unsigned int, - unsigned int, unsigned int); -static int ath5k_hw_proc_2word_tx_status(struct ath5k_hw *, struct ath5k_desc *, - struct ath5k_tx_status *); -static int ath5k_hw_proc_5212_rx_status(struct ath5k_hw *, struct ath5k_desc *, - struct ath5k_rx_status *); -static int ath5k_hw_proc_5210_rx_status(struct ath5k_hw *, struct ath5k_desc *, - struct ath5k_rx_status *); -static int ath5k_hw_get_capabilities(struct ath5k_hw *); - -static int ath5k_eeprom_init(struct ath5k_hw *); -static int ath5k_eeprom_read_mac(struct ath5k_hw *, u8 *); - -static int ath5k_hw_enable_pspoll(struct ath5k_hw *, u8 *, u16); -static int ath5k_hw_disable_pspoll(struct ath5k_hw *); - -/* - * Enable to overwrite the country code (use "00" for debug) - */ -#if 0 -#define COUNTRYCODE "00" -#endif - -/*******************\ - General Functions -\*******************/ - -/* - * Functions used internaly - */ - -static inline unsigned int ath5k_hw_htoclock(unsigned int usec, bool turbo) -{ - return turbo ? (usec * 80) : (usec * 40); -} - -static inline unsigned int ath5k_hw_clocktoh(unsigned int clock, bool turbo) -{ - return turbo ? (clock / 80) : (clock / 40); -} - -/* - * Check if a register write has been completed - */ -int ath5k_hw_register_timeout(struct ath5k_hw *ah, u32 reg, u32 flag, u32 val, - bool is_set) -{ - int i; - u32 data; - - for (i = AR5K_TUNE_REGISTER_TIMEOUT; i > 0; i--) { - data = ath5k_hw_reg_read(ah, reg); - if (is_set && (data & flag)) - break; - else if ((data & flag) == val) - break; - udelay(15); - } - - return (i <= 0) ? -EAGAIN : 0; -} - - -/***************************************\ - Attach/Detach Functions -\***************************************/ - -/* - * Power On Self Test helper function - */ -static int ath5k_hw_post(struct ath5k_hw *ah) -{ - - int i, c; - u16 cur_reg; - u16 regs[2] = {AR5K_STA_ID0, AR5K_PHY(8)}; - u32 var_pattern; - u32 static_pattern[4] = { - 0x55555555, 0xaaaaaaaa, - 0x66666666, 0x99999999 - }; - u32 init_val; - u32 cur_val; - - for (c = 0; c < 2; c++) { - - cur_reg = regs[c]; - - /* Save previous value */ - init_val = ath5k_hw_reg_read(ah, cur_reg); - - for (i = 0; i < 256; i++) { - var_pattern = i << 16 | i; - ath5k_hw_reg_write(ah, var_pattern, cur_reg); - cur_val = ath5k_hw_reg_read(ah, cur_reg); - - if (cur_val != var_pattern) { - ATH5K_ERR(ah->ah_sc, "POST Failed !!!\n"); - return -EAGAIN; - } - - /* Found on ndiswrapper dumps */ - var_pattern = 0x0039080f; - ath5k_hw_reg_write(ah, var_pattern, cur_reg); - } - - for (i = 0; i < 4; i++) { - var_pattern = static_pattern[i]; - ath5k_hw_reg_write(ah, var_pattern, cur_reg); - cur_val = ath5k_hw_reg_read(ah, cur_reg); - - if (cur_val != var_pattern) { - ATH5K_ERR(ah->ah_sc, "POST Failed !!!\n"); - return -EAGAIN; - } - - /* Found on ndiswrapper dumps */ - var_pattern = 0x003b080f; - ath5k_hw_reg_write(ah, var_pattern, cur_reg); - } - - /* Restore previous value */ - ath5k_hw_reg_write(ah, init_val, cur_reg); - - } - - return 0; - -} - -/* - * Check if the device is supported and initialize the needed structs - */ -struct ath5k_hw *ath5k_hw_attach(struct ath5k_softc *sc, u8 mac_version) -{ - struct ath5k_hw *ah; - struct pci_dev *pdev = sc->pdev; - u8 mac[ETH_ALEN]; - int ret; - u32 srev; - - /*If we passed the test malloc a ath5k_hw struct*/ - ah = kzalloc(sizeof(struct ath5k_hw), GFP_KERNEL); - if (ah == NULL) { - ret = -ENOMEM; - ATH5K_ERR(sc, "out of memory\n"); - goto err; - } - - ah->ah_sc = sc; - ah->ah_iobase = sc->iobase; - - /* - * HW information - */ - - ah->ah_op_mode = IEEE80211_IF_TYPE_STA; - ah->ah_radar.r_enabled = AR5K_TUNE_RADAR_ALERT; - ah->ah_turbo = false; - ah->ah_txpower.txp_tpc = AR5K_TUNE_TPC_TXPOWER; - ah->ah_imr = 0; - ah->ah_atim_window = 0; - ah->ah_aifs = AR5K_TUNE_AIFS; - ah->ah_cw_min = AR5K_TUNE_CWMIN; - ah->ah_limit_tx_retries = AR5K_INIT_TX_RETRY; - ah->ah_software_retry = false; - ah->ah_ant_diversity = AR5K_TUNE_ANT_DIVERSITY; - - /* - * Set the mac revision based on the pci id - */ - ah->ah_version = mac_version; - - /*Fill the ath5k_hw struct with the needed functions*/ - if (ah->ah_version == AR5K_AR5212) - ah->ah_magic = AR5K_EEPROM_MAGIC_5212; - else if (ah->ah_version == AR5K_AR5211) - ah->ah_magic = AR5K_EEPROM_MAGIC_5211; - - if (ah->ah_version == AR5K_AR5212) { - ah->ah_setup_tx_desc = ath5k_hw_setup_4word_tx_desc; - ah->ah_setup_xtx_desc = ath5k_hw_setup_xr_tx_desc; - ah->ah_proc_tx_desc = ath5k_hw_proc_4word_tx_status; - } else { - ah->ah_setup_tx_desc = ath5k_hw_setup_2word_tx_desc; - ah->ah_setup_xtx_desc = ath5k_hw_setup_xr_tx_desc; - ah->ah_proc_tx_desc = ath5k_hw_proc_2word_tx_status; - } - - if (ah->ah_version == AR5K_AR5212) - ah->ah_proc_rx_desc = ath5k_hw_proc_5212_rx_status; - else if (ah->ah_version <= AR5K_AR5211) - ah->ah_proc_rx_desc = ath5k_hw_proc_5210_rx_status; - - /* Bring device out of sleep and reset it's units */ - ret = ath5k_hw_nic_wakeup(ah, AR5K_INIT_MODE, true); - if (ret) - goto err_free; - - /* Get MAC, PHY and RADIO revisions */ - srev = ath5k_hw_reg_read(ah, AR5K_SREV); - ah->ah_mac_srev = srev; - ah->ah_mac_version = AR5K_REG_MS(srev, AR5K_SREV_VER); - ah->ah_mac_revision = AR5K_REG_MS(srev, AR5K_SREV_REV); - ah->ah_phy_revision = ath5k_hw_reg_read(ah, AR5K_PHY_CHIP_ID) & - 0xffffffff; - ah->ah_radio_5ghz_revision = ath5k_hw_radio_revision(ah, - CHANNEL_5GHZ); - - if (ah->ah_version == AR5K_AR5210) - ah->ah_radio_2ghz_revision = 0; - else - ah->ah_radio_2ghz_revision = ath5k_hw_radio_revision(ah, - CHANNEL_2GHZ); - - /* Return on unsuported chips (unsupported eeprom etc) */ - if ((srev >= AR5K_SREV_VER_AR5416) && - (srev < AR5K_SREV_VER_AR2425)) { - ATH5K_ERR(sc, "Device not yet supported.\n"); - ret = -ENODEV; - goto err_free; - } else if (srev == AR5K_SREV_VER_AR2425) { - ATH5K_WARN(sc, "Support for RF2425 is under development.\n"); - } - - /* Identify single chip solutions */ - if (((srev <= AR5K_SREV_VER_AR5414) && - (srev >= AR5K_SREV_VER_AR2413)) || - (srev == AR5K_SREV_VER_AR2425)) { - ah->ah_single_chip = true; - } else { - ah->ah_single_chip = false; - } - - /* Single chip radio */ - if (ah->ah_radio_2ghz_revision == ah->ah_radio_5ghz_revision) - ah->ah_radio_2ghz_revision = 0; - - /* Identify the radio chip*/ - if (ah->ah_version == AR5K_AR5210) { - ah->ah_radio = AR5K_RF5110; - /* - * Register returns 0x0/0x04 for radio revision - * so ath5k_hw_radio_revision doesn't parse the value - * correctly. For now we are based on mac's srev to - * identify RF2425 radio. - */ - } else if (srev == AR5K_SREV_VER_AR2425) { - ah->ah_radio = AR5K_RF2425; - ah->ah_phy_spending = AR5K_PHY_SPENDING_RF2425; - } else if (ah->ah_radio_5ghz_revision < AR5K_SREV_RAD_5112) { - ah->ah_radio = AR5K_RF5111; - ah->ah_phy_spending = AR5K_PHY_SPENDING_RF5111; - } else if (ah->ah_radio_5ghz_revision < AR5K_SREV_RAD_SC0) { - ah->ah_radio = AR5K_RF5112; - ah->ah_phy_spending = AR5K_PHY_SPENDING_RF5112; - } else if (ah->ah_radio_5ghz_revision < AR5K_SREV_RAD_SC1) { - ah->ah_radio = AR5K_RF2413; - ah->ah_phy_spending = AR5K_PHY_SPENDING_RF2413; - } else if (ah->ah_radio_5ghz_revision < AR5K_SREV_RAD_SC2) { - ah->ah_radio = AR5K_RF5413; - ah->ah_phy_spending = AR5K_PHY_SPENDING_RF5413; - } else if (ah->ah_radio_5ghz_revision < AR5K_SREV_RAD_5133) { - /* AR5424 */ - if (srev >= AR5K_SREV_VER_AR5424) { - ah->ah_radio = AR5K_RF5413; - ah->ah_phy_spending = AR5K_PHY_SPENDING_RF5413; - /* AR2424 */ - } else { - ah->ah_radio = AR5K_RF2413; /* For testing */ - ah->ah_phy_spending = AR5K_PHY_SPENDING_RF2413; - } - } - ah->ah_phy = AR5K_PHY(0); - - /* - * Write PCI-E power save settings - */ - if ((ah->ah_version == AR5K_AR5212) && (pdev->is_pcie)) { - ath5k_hw_reg_write(ah, 0x9248fc00, 0x4080); - ath5k_hw_reg_write(ah, 0x24924924, 0x4080); - ath5k_hw_reg_write(ah, 0x28000039, 0x4080); - ath5k_hw_reg_write(ah, 0x53160824, 0x4080); - ath5k_hw_reg_write(ah, 0xe5980579, 0x4080); - ath5k_hw_reg_write(ah, 0x001defff, 0x4080); - ath5k_hw_reg_write(ah, 0x1aaabe40, 0x4080); - ath5k_hw_reg_write(ah, 0xbe105554, 0x4080); - ath5k_hw_reg_write(ah, 0x000e3007, 0x4080); - ath5k_hw_reg_write(ah, 0x00000000, 0x4084); - } - - /* - * POST - */ - ret = ath5k_hw_post(ah); - if (ret) - goto err_free; - - /* Write AR5K_PCICFG_UNK on 2112B and later chips */ - if (ah->ah_radio_5ghz_revision > AR5K_SREV_RAD_2112B || - srev > AR5K_SREV_VER_AR2413) { - ath5k_hw_reg_write(ah, AR5K_PCICFG_UNK, AR5K_PCICFG); - } - - /* - * Get card capabilities, values, ... - */ - ret = ath5k_eeprom_init(ah); - if (ret) { - ATH5K_ERR(sc, "unable to init EEPROM\n"); - goto err_free; - } - - /* Get misc capabilities */ - ret = ath5k_hw_get_capabilities(ah); - if (ret) { - ATH5K_ERR(sc, "unable to get device capabilities: 0x%04x\n", - sc->pdev->device); - goto err_free; - } - - /* Get MAC address */ - ret = ath5k_eeprom_read_mac(ah, mac); - if (ret) { - ATH5K_ERR(sc, "unable to read address from EEPROM: 0x%04x\n", - sc->pdev->device); - goto err_free; - } - - ath5k_hw_set_lladdr(ah, mac); - /* Set BSSID to bcast address: ff:ff:ff:ff:ff:ff for now */ - memset(ah->ah_bssid, 0xff, ETH_ALEN); - ath5k_hw_set_associd(ah, ah->ah_bssid, 0); - ath5k_hw_set_opmode(ah); - - ath5k_hw_set_rfgain_opt(ah); - - return ah; -err_free: - kfree(ah); -err: - return ERR_PTR(ret); -} - -/* - * Bring up MAC + PHY Chips - */ -static int ath5k_hw_nic_wakeup(struct ath5k_hw *ah, int flags, bool initial) -{ - struct pci_dev *pdev = ah->ah_sc->pdev; - u32 turbo, mode, clock, bus_flags; - int ret; - - turbo = 0; - mode = 0; - clock = 0; - - ATH5K_TRACE(ah->ah_sc); - - /* Wakeup the device */ - ret = ath5k_hw_set_power(ah, AR5K_PM_AWAKE, true, 0); - if (ret) { - ATH5K_ERR(ah->ah_sc, "failed to wakeup the MAC Chip\n"); - return ret; - } - - if (ah->ah_version != AR5K_AR5210) { - /* - * Get channel mode flags - */ - - if (ah->ah_radio >= AR5K_RF5112) { - mode = AR5K_PHY_MODE_RAD_RF5112; - clock = AR5K_PHY_PLL_RF5112; - } else { - mode = AR5K_PHY_MODE_RAD_RF5111; /*Zero*/ - clock = AR5K_PHY_PLL_RF5111; /*Zero*/ - } - - if (flags & CHANNEL_2GHZ) { - mode |= AR5K_PHY_MODE_FREQ_2GHZ; - clock |= AR5K_PHY_PLL_44MHZ; - - if (flags & CHANNEL_CCK) { - mode |= AR5K_PHY_MODE_MOD_CCK; - } else if (flags & CHANNEL_OFDM) { - /* XXX Dynamic OFDM/CCK is not supported by the - * AR5211 so we set MOD_OFDM for plain g (no - * CCK headers) operation. We need to test - * this, 5211 might support ofdm-only g after - * all, there are also initial register values - * in the code for g mode (see initvals.c). */ - if (ah->ah_version == AR5K_AR5211) - mode |= AR5K_PHY_MODE_MOD_OFDM; - else - mode |= AR5K_PHY_MODE_MOD_DYN; - } else { - ATH5K_ERR(ah->ah_sc, - "invalid radio modulation mode\n"); - return -EINVAL; - } - } else if (flags & CHANNEL_5GHZ) { - mode |= AR5K_PHY_MODE_FREQ_5GHZ; - clock |= AR5K_PHY_PLL_40MHZ; - - if (flags & CHANNEL_OFDM) - mode |= AR5K_PHY_MODE_MOD_OFDM; - else { - ATH5K_ERR(ah->ah_sc, - "invalid radio modulation mode\n"); - return -EINVAL; - } - } else { - ATH5K_ERR(ah->ah_sc, "invalid radio frequency mode\n"); - return -EINVAL; - } - - if (flags & CHANNEL_TURBO) - turbo = AR5K_PHY_TURBO_MODE | AR5K_PHY_TURBO_SHORT; - } else { /* Reset the device */ - - /* ...enable Atheros turbo mode if requested */ - if (flags & CHANNEL_TURBO) - ath5k_hw_reg_write(ah, AR5K_PHY_TURBO_MODE, - AR5K_PHY_TURBO); - } - - /* reseting PCI on PCI-E cards results card to hang - * and always return 0xffff... so we ingore that flag - * for PCI-E cards */ - bus_flags = (pdev->is_pcie) ? 0 : AR5K_RESET_CTL_PCI; - - /* Reset chipset */ - ret = ath5k_hw_nic_reset(ah, AR5K_RESET_CTL_PCU | - AR5K_RESET_CTL_BASEBAND | bus_flags); - if (ret) { - ATH5K_ERR(ah->ah_sc, "failed to reset the MAC Chip\n"); - return -EIO; - } - - if (ah->ah_version == AR5K_AR5210) - udelay(2300); - - /* ...wakeup again!*/ - ret = ath5k_hw_set_power(ah, AR5K_PM_AWAKE, true, 0); - if (ret) { - ATH5K_ERR(ah->ah_sc, "failed to resume the MAC Chip\n"); - return ret; - } - - /* ...final warm reset */ - if (ath5k_hw_nic_reset(ah, 0)) { - ATH5K_ERR(ah->ah_sc, "failed to warm reset the MAC Chip\n"); - return -EIO; - } - - if (ah->ah_version != AR5K_AR5210) { - /* ...set the PHY operating mode */ - ath5k_hw_reg_write(ah, clock, AR5K_PHY_PLL); - udelay(300); - - ath5k_hw_reg_write(ah, mode, AR5K_PHY_MODE); - ath5k_hw_reg_write(ah, turbo, AR5K_PHY_TURBO); - } - - return 0; -} - -/* - * Get the rate table for a specific operation mode - */ -const struct ath5k_rate_table *ath5k_hw_get_rate_table(struct ath5k_hw *ah, - unsigned int mode) -{ - ATH5K_TRACE(ah->ah_sc); - - if (!test_bit(mode, ah->ah_capabilities.cap_mode)) - return NULL; - - /* Get rate tables */ - switch (mode) { - case AR5K_MODE_11A: - return &ath5k_rt_11a; - case AR5K_MODE_11A_TURBO: - return &ath5k_rt_turbo; - case AR5K_MODE_11B: - return &ath5k_rt_11b; - case AR5K_MODE_11G: - return &ath5k_rt_11g; - case AR5K_MODE_11G_TURBO: - return &ath5k_rt_xr; - } - - return NULL; -} - -/* - * Free the ath5k_hw struct - */ -void ath5k_hw_detach(struct ath5k_hw *ah) -{ - ATH5K_TRACE(ah->ah_sc); - - __set_bit(ATH_STAT_INVALID, ah->ah_sc->status); - - if (ah->ah_rf_banks != NULL) - kfree(ah->ah_rf_banks); - - /* assume interrupts are down */ - kfree(ah); -} - -/****************************\ - Reset function and helpers -\****************************/ - -/** - * ath5k_hw_write_ofdm_timings - set OFDM timings on AR5212 - * - * @ah: the &struct ath5k_hw - * @channel: the currently set channel upon reset - * - * Write the OFDM timings for the AR5212 upon reset. This is a helper for - * ath5k_hw_reset(). This seems to tune the PLL a specified frequency - * depending on the bandwidth of the channel. - * - */ -static inline int ath5k_hw_write_ofdm_timings(struct ath5k_hw *ah, - struct ieee80211_channel *channel) -{ - /* Get exponent and mantissa and set it */ - u32 coef_scaled, coef_exp, coef_man, - ds_coef_exp, ds_coef_man, clock; - - if (!(ah->ah_version == AR5K_AR5212) || - !(channel->hw_value & CHANNEL_OFDM)) - BUG(); - - /* Seems there are two PLLs, one for baseband sampling and one - * for tuning. Tuning basebands are 40 MHz or 80MHz when in - * turbo. */ - clock = channel->hw_value & CHANNEL_TURBO ? 80 : 40; - coef_scaled = ((5 * (clock << 24)) / 2) / - channel->center_freq; - - for (coef_exp = 31; coef_exp > 0; coef_exp--) - if ((coef_scaled >> coef_exp) & 0x1) - break; - - if (!coef_exp) - return -EINVAL; - - coef_exp = 14 - (coef_exp - 24); - coef_man = coef_scaled + - (1 << (24 - coef_exp - 1)); - ds_coef_man = coef_man >> (24 - coef_exp); - ds_coef_exp = coef_exp - 16; - - AR5K_REG_WRITE_BITS(ah, AR5K_PHY_TIMING_3, - AR5K_PHY_TIMING_3_DSC_MAN, ds_coef_man); - AR5K_REG_WRITE_BITS(ah, AR5K_PHY_TIMING_3, - AR5K_PHY_TIMING_3_DSC_EXP, ds_coef_exp); - - return 0; -} - -/** - * ath5k_hw_write_rate_duration - set rate duration during hw resets - * - * @ah: the &struct ath5k_hw - * @mode: one of enum ath5k_driver_mode - * - * Write the rate duration table for the current mode upon hw reset. This - * is a helper for ath5k_hw_reset(). It seems all this is doing is setting - * an ACK timeout for the hardware for the current mode for each rate. The - * rates which are capable of short preamble (802.11b rates 2Mbps, 5.5Mbps, - * and 11Mbps) have another register for the short preamble ACK timeout - * calculation. - * - */ -static inline void ath5k_hw_write_rate_duration(struct ath5k_hw *ah, - unsigned int mode) -{ - struct ath5k_softc *sc = ah->ah_sc; - const struct ath5k_rate_table *rt; - struct ieee80211_rate srate = {}; - unsigned int i; - - /* Get rate table for the current operating mode */ - rt = ath5k_hw_get_rate_table(ah, mode); - - /* Write rate duration table */ - for (i = 0; i < rt->rate_count; i++) { - const struct ath5k_rate *rate, *control_rate; - - u32 reg; - u16 tx_time; - - rate = &rt->rates[i]; - control_rate = &rt->rates[rate->control_rate]; - - /* Set ACK timeout */ - reg = AR5K_RATE_DUR(rate->rate_code); - - srate.bitrate = control_rate->rate_kbps/100; - - /* An ACK frame consists of 10 bytes. If you add the FCS, - * which ieee80211_generic_frame_duration() adds, - * its 14 bytes. Note we use the control rate and not the - * actual rate for this rate. See mac80211 tx.c - * ieee80211_duration() for a brief description of - * what rate we should choose to TX ACKs. */ - tx_time = le16_to_cpu(ieee80211_generic_frame_duration(sc->hw, - sc->vif, 10, &srate)); - - ath5k_hw_reg_write(ah, tx_time, reg); - - if (!HAS_SHPREAMBLE(i)) - continue; - - /* - * We're not distinguishing short preamble here, - * This is true, all we'll get is a longer value here - * which is not necessarilly bad. We could use - * export ieee80211_frame_duration() but that needs to be - * fixed first to be properly used by mac802111 drivers: - * - * - remove erp stuff and let the routine figure ofdm - * erp rates - * - remove passing argument ieee80211_local as - * drivers don't have access to it - * - move drivers using ieee80211_generic_frame_duration() - * to this - */ - ath5k_hw_reg_write(ah, tx_time, - reg + (AR5K_SET_SHORT_PREAMBLE << 2)); - } -} - -/* - * Main reset function - */ -int ath5k_hw_reset(struct ath5k_hw *ah, enum ieee80211_if_types op_mode, - struct ieee80211_channel *channel, bool change_channel) -{ - struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; - struct pci_dev *pdev = ah->ah_sc->pdev; - u32 data, s_seq, s_ant, s_led[3], dma_size; - unsigned int i, mode, freq, ee_mode, ant[2]; - int ret; - - ATH5K_TRACE(ah->ah_sc); - - s_seq = 0; - s_ant = 0; - ee_mode = 0; - freq = 0; - mode = 0; - - /* - * Save some registers before a reset - */ - /*DCU/Antenna selection not available on 5210*/ - if (ah->ah_version != AR5K_AR5210) { - if (change_channel) { - /* Seq number for queue 0 -do this for all queues ? */ - s_seq = ath5k_hw_reg_read(ah, - AR5K_QUEUE_DFS_SEQNUM(0)); - /*Default antenna*/ - s_ant = ath5k_hw_reg_read(ah, AR5K_DEFAULT_ANTENNA); - } - } - - /*GPIOs*/ - s_led[0] = ath5k_hw_reg_read(ah, AR5K_PCICFG) & AR5K_PCICFG_LEDSTATE; - s_led[1] = ath5k_hw_reg_read(ah, AR5K_GPIOCR); - s_led[2] = ath5k_hw_reg_read(ah, AR5K_GPIODO); - - if (change_channel && ah->ah_rf_banks != NULL) - ath5k_hw_get_rf_gain(ah); - - - /*Wakeup the device*/ - ret = ath5k_hw_nic_wakeup(ah, channel->hw_value, false); - if (ret) - return ret; - - /* - * Initialize operating mode - */ - ah->ah_op_mode = op_mode; - - /* - * 5111/5112 Settings - * 5210 only comes with RF5110 - */ - if (ah->ah_version != AR5K_AR5210) { - if (ah->ah_radio != AR5K_RF5111 && - ah->ah_radio != AR5K_RF5112 && - ah->ah_radio != AR5K_RF5413 && - ah->ah_radio != AR5K_RF2413 && - ah->ah_radio != AR5K_RF2425) { - ATH5K_ERR(ah->ah_sc, - "invalid phy radio: %u\n", ah->ah_radio); - return -EINVAL; - } - - switch (channel->hw_value & CHANNEL_MODES) { - case CHANNEL_A: - mode = AR5K_MODE_11A; - freq = AR5K_INI_RFGAIN_5GHZ; - ee_mode = AR5K_EEPROM_MODE_11A; - break; - case CHANNEL_G: - mode = AR5K_MODE_11G; - freq = AR5K_INI_RFGAIN_2GHZ; - ee_mode = AR5K_EEPROM_MODE_11G; - break; - case CHANNEL_B: - mode = AR5K_MODE_11B; - freq = AR5K_INI_RFGAIN_2GHZ; - ee_mode = AR5K_EEPROM_MODE_11B; - break; - case CHANNEL_T: - mode = AR5K_MODE_11A_TURBO; - freq = AR5K_INI_RFGAIN_5GHZ; - ee_mode = AR5K_EEPROM_MODE_11A; - break; - /*Is this ok on 5211 too ?*/ - case CHANNEL_TG: - mode = AR5K_MODE_11G_TURBO; - freq = AR5K_INI_RFGAIN_2GHZ; - ee_mode = AR5K_EEPROM_MODE_11G; - break; - case CHANNEL_XR: - if (ah->ah_version == AR5K_AR5211) { - ATH5K_ERR(ah->ah_sc, - "XR mode not available on 5211"); - return -EINVAL; - } - mode = AR5K_MODE_XR; - freq = AR5K_INI_RFGAIN_5GHZ; - ee_mode = AR5K_EEPROM_MODE_11A; - break; - default: - ATH5K_ERR(ah->ah_sc, - "invalid channel: %d\n", channel->center_freq); - return -EINVAL; - } - - /* PHY access enable */ - ath5k_hw_reg_write(ah, AR5K_PHY_SHIFT_5GHZ, AR5K_PHY(0)); - - } - - ret = ath5k_hw_write_initvals(ah, mode, change_channel); - if (ret) - return ret; - - /* - * 5211/5212 Specific - */ - if (ah->ah_version != AR5K_AR5210) { - /* - * Write initial RF gain settings - * This should work for both 5111/5112 - */ - ret = ath5k_hw_rfgain(ah, freq); - if (ret) - return ret; - - mdelay(1); - - /* - * Write some more initial register settings - */ - if (ah->ah_version == AR5K_AR5212) { - ath5k_hw_reg_write(ah, 0x0002a002, 0x982c); - - if (channel->hw_value == CHANNEL_G) - if (ah->ah_mac_srev < AR5K_SREV_VER_AR2413) - ath5k_hw_reg_write(ah, 0x00f80d80, - 0x994c); - else if (ah->ah_mac_srev < AR5K_SREV_VER_AR2424) - ath5k_hw_reg_write(ah, 0x00380140, - 0x994c); - else if (ah->ah_mac_srev < AR5K_SREV_VER_AR2425) - ath5k_hw_reg_write(ah, 0x00fc0ec0, - 0x994c); - else /* 2425 */ - ath5k_hw_reg_write(ah, 0x00fc0fc0, - 0x994c); - else - ath5k_hw_reg_write(ah, 0x00000000, 0x994c); - - /* Some bits are disabled here, we know nothing about - * register 0xa228 yet, most of the times this ends up - * with a value 0x9b5 -haven't seen any dump with - * a different value- */ - /* Got this from decompiling binary HAL */ - data = ath5k_hw_reg_read(ah, 0xa228); - data &= 0xfffffdff; - ath5k_hw_reg_write(ah, data, 0xa228); - - data = ath5k_hw_reg_read(ah, 0xa228); - data &= 0xfffe03ff; - ath5k_hw_reg_write(ah, data, 0xa228); - data = 0; - - /* Just write 0x9b5 ? */ - /* ath5k_hw_reg_write(ah, 0x000009b5, 0xa228); */ - ath5k_hw_reg_write(ah, 0x0000000f, AR5K_SEQ_MASK); - ath5k_hw_reg_write(ah, 0x00000000, 0xa254); - ath5k_hw_reg_write(ah, 0x0000000e, AR5K_PHY_SCAL); - } - - /* Fix for first revision of the RF5112 RF chipset */ - if (ah->ah_radio >= AR5K_RF5112 && - ah->ah_radio_5ghz_revision < - AR5K_SREV_RAD_5112A) { - ath5k_hw_reg_write(ah, AR5K_PHY_CCKTXCTL_WORLD, - AR5K_PHY_CCKTXCTL); - if (channel->hw_value & CHANNEL_5GHZ) - data = 0xffb81020; - else - data = 0xffb80d20; - ath5k_hw_reg_write(ah, data, AR5K_PHY_FRAME_CTL); - data = 0; - } - - /* - * Set TX power (FIXME) - */ - ret = ath5k_hw_txpower(ah, channel, AR5K_TUNE_DEFAULT_TXPOWER); - if (ret) - return ret; - - /* Write rate duration table only on AR5212 and if - * virtual interface has already been brought up - * XXX: rethink this after new mode changes to - * mac80211 are integrated */ - if (ah->ah_version == AR5K_AR5212 && - ah->ah_sc->vif != NULL) - ath5k_hw_write_rate_duration(ah, mode); - - /* - * Write RF registers - */ - ret = ath5k_hw_rfregs(ah, channel, mode); - if (ret) - return ret; - - /* - * Configure additional registers - */ - - /* Write OFDM timings on 5212*/ - if (ah->ah_version == AR5K_AR5212 && - channel->hw_value & CHANNEL_OFDM) { - ret = ath5k_hw_write_ofdm_timings(ah, channel); - if (ret) - return ret; - } - - /*Enable/disable 802.11b mode on 5111 - (enable 2111 frequency converter + CCK)*/ - if (ah->ah_radio == AR5K_RF5111) { - if (mode == AR5K_MODE_11B) - AR5K_REG_ENABLE_BITS(ah, AR5K_TXCFG, - AR5K_TXCFG_B_MODE); - else - AR5K_REG_DISABLE_BITS(ah, AR5K_TXCFG, - AR5K_TXCFG_B_MODE); - } - - /* - * Set channel and calibrate the PHY - */ - ret = ath5k_hw_channel(ah, channel); - if (ret) - return ret; - - /* Set antenna mode */ - AR5K_REG_MASKED_BITS(ah, AR5K_PHY_ANT_CTL, - ah->ah_antenna[ee_mode][0], 0xfffffc06); - - /* - * In case a fixed antenna was set as default - * write the same settings on both AR5K_PHY_ANT_SWITCH_TABLE - * registers. - */ - if (s_ant != 0){ - if (s_ant == AR5K_ANT_FIXED_A) /* 1 - Main */ - ant[0] = ant[1] = AR5K_ANT_FIXED_A; - else /* 2 - Aux */ - ant[0] = ant[1] = AR5K_ANT_FIXED_B; - } else { - ant[0] = AR5K_ANT_FIXED_A; - ant[1] = AR5K_ANT_FIXED_B; - } - - ath5k_hw_reg_write(ah, ah->ah_antenna[ee_mode][ant[0]], - AR5K_PHY_ANT_SWITCH_TABLE_0); - ath5k_hw_reg_write(ah, ah->ah_antenna[ee_mode][ant[1]], - AR5K_PHY_ANT_SWITCH_TABLE_1); - - /* Commit values from EEPROM */ - if (ah->ah_radio == AR5K_RF5111) - AR5K_REG_WRITE_BITS(ah, AR5K_PHY_FRAME_CTL, - AR5K_PHY_FRAME_CTL_TX_CLIP, ee->ee_tx_clip); - - ath5k_hw_reg_write(ah, - AR5K_PHY_NF_SVAL(ee->ee_noise_floor_thr[ee_mode]), - AR5K_PHY_NFTHRES); - - AR5K_REG_MASKED_BITS(ah, AR5K_PHY_SETTLING, - (ee->ee_switch_settling[ee_mode] << 7) & 0x3f80, - 0xffffc07f); - AR5K_REG_MASKED_BITS(ah, AR5K_PHY_GAIN, - (ee->ee_ant_tx_rx[ee_mode] << 12) & 0x3f000, - 0xfffc0fff); - AR5K_REG_MASKED_BITS(ah, AR5K_PHY_DESIRED_SIZE, - (ee->ee_adc_desired_size[ee_mode] & 0x00ff) | - ((ee->ee_pga_desired_size[ee_mode] << 8) & 0xff00), - 0xffff0000); - - ath5k_hw_reg_write(ah, - (ee->ee_tx_end2xpa_disable[ee_mode] << 24) | - (ee->ee_tx_end2xpa_disable[ee_mode] << 16) | - (ee->ee_tx_frm2xpa_enable[ee_mode] << 8) | - (ee->ee_tx_frm2xpa_enable[ee_mode]), AR5K_PHY_RF_CTL4); - - AR5K_REG_MASKED_BITS(ah, AR5K_PHY_RF_CTL3, - ee->ee_tx_end2xlna_enable[ee_mode] << 8, 0xffff00ff); - AR5K_REG_MASKED_BITS(ah, AR5K_PHY_NF, - (ee->ee_thr_62[ee_mode] << 12) & 0x7f000, 0xfff80fff); - AR5K_REG_MASKED_BITS(ah, AR5K_PHY_OFDM_SELFCORR, 4, 0xffffff01); - - AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_IQ, - AR5K_PHY_IQ_CORR_ENABLE | - (ee->ee_i_cal[ee_mode] << AR5K_PHY_IQ_CORR_Q_I_COFF_S) | - ee->ee_q_cal[ee_mode]); - - if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_1) - AR5K_REG_WRITE_BITS(ah, AR5K_PHY_GAIN_2GHZ, - AR5K_PHY_GAIN_2GHZ_MARGIN_TXRX, - ee->ee_margin_tx_rx[ee_mode]); - - } else { - mdelay(1); - /* Disable phy and wait */ - ath5k_hw_reg_write(ah, AR5K_PHY_ACT_DISABLE, AR5K_PHY_ACT); - mdelay(1); - } - - /* - * Restore saved values - */ - /*DCU/Antenna selection not available on 5210*/ - if (ah->ah_version != AR5K_AR5210) { - ath5k_hw_reg_write(ah, s_seq, AR5K_QUEUE_DFS_SEQNUM(0)); - ath5k_hw_reg_write(ah, s_ant, AR5K_DEFAULT_ANTENNA); - } - AR5K_REG_ENABLE_BITS(ah, AR5K_PCICFG, s_led[0]); - ath5k_hw_reg_write(ah, s_led[1], AR5K_GPIOCR); - ath5k_hw_reg_write(ah, s_led[2], AR5K_GPIODO); - - /* - * Misc - */ - /* XXX: add ah->aid once mac80211 gives this to us */ - ath5k_hw_set_associd(ah, ah->ah_bssid, 0); - - ath5k_hw_set_opmode(ah); - /*PISR/SISR Not available on 5210*/ - if (ah->ah_version != AR5K_AR5210) { - ath5k_hw_reg_write(ah, 0xffffffff, AR5K_PISR); - /* If we later allow tuning for this, store into sc structure */ - data = AR5K_TUNE_RSSI_THRES | - AR5K_TUNE_BMISS_THRES << AR5K_RSSI_THR_BMISS_S; - ath5k_hw_reg_write(ah, data, AR5K_RSSI_THR); - } - - /* - * Set Rx/Tx DMA Configuration - * - * Set maximum DMA size (512) except for PCI-E cards since - * it causes rx overruns and tx errors (tested on 5424 but since - * rx overruns also occur on 5416/5418 with madwifi we set 128 - * for all PCI-E cards to be safe). - * - * In dumps this is 128 for allchips. - * - * XXX: need to check 5210 for this - * TODO: Check out tx triger level, it's always 64 on dumps but I - * guess we can tweak it and see how it goes ;-) - */ - dma_size = (pdev->is_pcie) ? AR5K_DMASIZE_128B : AR5K_DMASIZE_512B; - if (ah->ah_version != AR5K_AR5210) { - AR5K_REG_WRITE_BITS(ah, AR5K_TXCFG, - AR5K_TXCFG_SDMAMR, dma_size); - AR5K_REG_WRITE_BITS(ah, AR5K_RXCFG, - AR5K_RXCFG_SDMAMW, dma_size); - } - - /* - * Enable the PHY and wait until completion - */ - ath5k_hw_reg_write(ah, AR5K_PHY_ACT_ENABLE, AR5K_PHY_ACT); - - /* - * On 5211+ read activation -> rx delay - * and use it. - */ - if (ah->ah_version != AR5K_AR5210) { - data = ath5k_hw_reg_read(ah, AR5K_PHY_RX_DELAY) & - AR5K_PHY_RX_DELAY_M; - data = (channel->hw_value & CHANNEL_CCK) ? - ((data << 2) / 22) : (data / 10); - - udelay(100 + (2 * data)); - data = 0; - } else { - mdelay(1); - } - - /* - * Perform ADC test (?) - */ - data = ath5k_hw_reg_read(ah, AR5K_PHY_TST1); - ath5k_hw_reg_write(ah, AR5K_PHY_TST1_TXHOLD, AR5K_PHY_TST1); - for (i = 0; i <= 20; i++) { - if (!(ath5k_hw_reg_read(ah, AR5K_PHY_ADC_TEST) & 0x10)) - break; - udelay(200); - } - ath5k_hw_reg_write(ah, data, AR5K_PHY_TST1); - data = 0; - - /* - * Start automatic gain calibration - * - * During AGC calibration RX path is re-routed to - * a signal detector so we don't receive anything. - * - * This method is used to calibrate some static offsets - * used together with on-the fly I/Q calibration (the - * one performed via ath5k_hw_phy_calibrate), that doesn't - * interrupt rx path. - * - * If we are in a noisy environment AGC calibration may time - * out. - */ - AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_AGCCTL, - AR5K_PHY_AGCCTL_CAL); - - /* At the same time start I/Q calibration for QAM constellation - * -no need for CCK- */ - ah->ah_calibration = false; - if (!(mode == AR5K_MODE_11B)) { - ah->ah_calibration = true; - AR5K_REG_WRITE_BITS(ah, AR5K_PHY_IQ, - AR5K_PHY_IQ_CAL_NUM_LOG_MAX, 15); - AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_IQ, - AR5K_PHY_IQ_RUN); - } - - /* Wait for gain calibration to finish (we check for I/Q calibration - * during ath5k_phy_calibrate) */ - if (ath5k_hw_register_timeout(ah, AR5K_PHY_AGCCTL, - AR5K_PHY_AGCCTL_CAL, 0, false)) { - ATH5K_ERR(ah->ah_sc, "gain calibration timeout (%uMHz)\n", - channel->center_freq); - return -EAGAIN; - } - - /* - * Start noise floor calibration - * - * If we run NF calibration before AGC, it always times out. - * Binary HAL starts NF and AGC calibration at the same time - * and only waits for AGC to finish. I believe that's wrong because - * during NF calibration, rx path is also routed to a detector, so if - * it doesn't finish we won't have RX. - * - * XXX: Find an interval that's OK for all cards... - */ - ret = ath5k_hw_noise_floor_calibration(ah, channel->center_freq); - if (ret) - return ret; - - /* - * Reset queues and start beacon timers at the end of the reset routine - */ - for (i = 0; i < ah->ah_capabilities.cap_queues.q_tx_num; i++) { - /*No QCU on 5210*/ - if (ah->ah_version != AR5K_AR5210) - AR5K_REG_WRITE_Q(ah, AR5K_QUEUE_QCUMASK(i), i); - - ret = ath5k_hw_reset_tx_queue(ah, i); - if (ret) { - ATH5K_ERR(ah->ah_sc, - "failed to reset TX queue #%d\n", i); - return ret; - } - } - - /* Pre-enable interrupts on 5211/5212*/ - if (ah->ah_version != AR5K_AR5210) - ath5k_hw_set_intr(ah, AR5K_INT_RX | AR5K_INT_TX | - AR5K_INT_FATAL); - - /* - * Set RF kill flags if supported by the device (read from the EEPROM) - * Disable gpio_intr for now since it results system hang. - * TODO: Handle this in ath5k_intr - */ -#if 0 - if (AR5K_EEPROM_HDR_RFKILL(ah->ah_capabilities.cap_eeprom.ee_header)) { - ath5k_hw_set_gpio_input(ah, 0); - ah->ah_gpio[0] = ath5k_hw_get_gpio(ah, 0); - if (ah->ah_gpio[0] == 0) - ath5k_hw_set_gpio_intr(ah, 0, 1); - else - ath5k_hw_set_gpio_intr(ah, 0, 0); - } -#endif - - /* - * Set the 32MHz reference clock on 5212 phy clock sleep register - * - * TODO: Find out how to switch to external 32Khz clock to save power - */ - if (ah->ah_version == AR5K_AR5212) { - ath5k_hw_reg_write(ah, AR5K_PHY_SCR_32MHZ, AR5K_PHY_SCR); - ath5k_hw_reg_write(ah, AR5K_PHY_SLMT_32MHZ, AR5K_PHY_SLMT); - ath5k_hw_reg_write(ah, AR5K_PHY_SCAL_32MHZ, AR5K_PHY_SCAL); - ath5k_hw_reg_write(ah, AR5K_PHY_SCLOCK_32MHZ, AR5K_PHY_SCLOCK); - ath5k_hw_reg_write(ah, AR5K_PHY_SDELAY_32MHZ, AR5K_PHY_SDELAY); - ath5k_hw_reg_write(ah, ah->ah_phy_spending, AR5K_PHY_SPENDING); - - data = ath5k_hw_reg_read(ah, AR5K_USEC_5211) & 0xffffc07f ; - data |= (ah->ah_phy_spending == AR5K_PHY_SPENDING_18) ? - 0x00000f80 : 0x00001380 ; - ath5k_hw_reg_write(ah, data, AR5K_USEC_5211); - data = 0; - } - - if (ah->ah_version == AR5K_AR5212) { - ath5k_hw_reg_write(ah, 0x000100aa, 0x8118); - ath5k_hw_reg_write(ah, 0x00003210, 0x811c); - ath5k_hw_reg_write(ah, 0x00000052, 0x8108); - if (ah->ah_mac_srev >= AR5K_SREV_VER_AR2413) - ath5k_hw_reg_write(ah, 0x00000004, 0x8120); - } - - /* - * Disable beacons and reset the register - */ - AR5K_REG_DISABLE_BITS(ah, AR5K_BEACON, AR5K_BEACON_ENABLE | - AR5K_BEACON_RESET_TSF); - - return 0; -} - -/* - * Reset chipset - */ -static int ath5k_hw_nic_reset(struct ath5k_hw *ah, u32 val) -{ - int ret; - u32 mask = val ? val : ~0U; - - ATH5K_TRACE(ah->ah_sc); - - /* Read-and-clear RX Descriptor Pointer*/ - ath5k_hw_reg_read(ah, AR5K_RXDP); - - /* - * Reset the device and wait until success - */ - ath5k_hw_reg_write(ah, val, AR5K_RESET_CTL); - - /* Wait at least 128 PCI clocks */ - udelay(15); - - if (ah->ah_version == AR5K_AR5210) { - val &= AR5K_RESET_CTL_CHIP; - mask &= AR5K_RESET_CTL_CHIP; - } else { - val &= AR5K_RESET_CTL_PCU | AR5K_RESET_CTL_BASEBAND; - mask &= AR5K_RESET_CTL_PCU | AR5K_RESET_CTL_BASEBAND; - } - - ret = ath5k_hw_register_timeout(ah, AR5K_RESET_CTL, mask, val, false); - - /* - * Reset configuration register (for hw byte-swap). Note that this - * is only set for big endian. We do the necessary magic in - * AR5K_INIT_CFG. - */ - if ((val & AR5K_RESET_CTL_PCU) == 0) - ath5k_hw_reg_write(ah, AR5K_INIT_CFG, AR5K_CFG); - - return ret; -} - -/* - * Power management functions - */ - -/* - * Sleep control - */ -int ath5k_hw_set_power(struct ath5k_hw *ah, enum ath5k_power_mode mode, - bool set_chip, u16 sleep_duration) -{ - unsigned int i; - u32 staid, data; - - ATH5K_TRACE(ah->ah_sc); - staid = ath5k_hw_reg_read(ah, AR5K_STA_ID1); - - switch (mode) { - case AR5K_PM_AUTO: - staid &= ~AR5K_STA_ID1_DEFAULT_ANTENNA; - /* fallthrough */ - case AR5K_PM_NETWORK_SLEEP: - if (set_chip) - ath5k_hw_reg_write(ah, - AR5K_SLEEP_CTL_SLE_ALLOW | - sleep_duration, - AR5K_SLEEP_CTL); - - staid |= AR5K_STA_ID1_PWR_SV; - break; - - case AR5K_PM_FULL_SLEEP: - if (set_chip) - ath5k_hw_reg_write(ah, AR5K_SLEEP_CTL_SLE_SLP, - AR5K_SLEEP_CTL); - - staid |= AR5K_STA_ID1_PWR_SV; - break; - - case AR5K_PM_AWAKE: - - staid &= ~AR5K_STA_ID1_PWR_SV; - - if (!set_chip) - goto commit; - - /* Preserve sleep duration */ - data = ath5k_hw_reg_read(ah, AR5K_SLEEP_CTL); - if( data & 0xffc00000 ){ - data = 0; - } else { - data = data & 0xfffcffff; - } - - ath5k_hw_reg_write(ah, data, AR5K_SLEEP_CTL); - udelay(15); - - for (i = 50; i > 0; i--) { - /* Check if the chip did wake up */ - if ((ath5k_hw_reg_read(ah, AR5K_PCICFG) & - AR5K_PCICFG_SPWR_DN) == 0) - break; - - /* Wait a bit and retry */ - udelay(200); - ath5k_hw_reg_write(ah, data, AR5K_SLEEP_CTL); - } - - /* Fail if the chip didn't wake up */ - if (i <= 0) - return -EIO; - - break; - - default: - return -EINVAL; - } - -commit: - ah->ah_power_mode = mode; - ath5k_hw_reg_write(ah, staid, AR5K_STA_ID1); - - return 0; -} - -/***********************\ - DMA Related Functions -\***********************/ - -/* - * Receive functions - */ - -/* - * Start DMA receive - */ -void ath5k_hw_start_rx(struct ath5k_hw *ah) -{ - ATH5K_TRACE(ah->ah_sc); - ath5k_hw_reg_write(ah, AR5K_CR_RXE, AR5K_CR); - ath5k_hw_reg_read(ah, AR5K_CR); -} - -/* - * Stop DMA receive - */ -int ath5k_hw_stop_rx_dma(struct ath5k_hw *ah) -{ - unsigned int i; - - ATH5K_TRACE(ah->ah_sc); - ath5k_hw_reg_write(ah, AR5K_CR_RXD, AR5K_CR); - - /* - * It may take some time to disable the DMA receive unit - */ - for (i = 2000; i > 0 && - (ath5k_hw_reg_read(ah, AR5K_CR) & AR5K_CR_RXE) != 0; - i--) - udelay(10); - - return i ? 0 : -EBUSY; -} - -/* - * Get the address of the RX Descriptor - */ -u32 ath5k_hw_get_rx_buf(struct ath5k_hw *ah) -{ - return ath5k_hw_reg_read(ah, AR5K_RXDP); -} - -/* - * Set the address of the RX Descriptor - */ -void ath5k_hw_put_rx_buf(struct ath5k_hw *ah, u32 phys_addr) -{ - ATH5K_TRACE(ah->ah_sc); - - /*TODO:Shouldn't we check if RX is enabled first ?*/ - ath5k_hw_reg_write(ah, phys_addr, AR5K_RXDP); -} - -/* - * Transmit functions - */ - -/* - * Start DMA transmit for a specific queue - * (see also QCU/DCU functions) - */ -int ath5k_hw_tx_start(struct ath5k_hw *ah, unsigned int queue) -{ - u32 tx_queue; - - ATH5K_TRACE(ah->ah_sc); - AR5K_ASSERT_ENTRY(queue, ah->ah_capabilities.cap_queues.q_tx_num); - - /* Return if queue is declared inactive */ - if (ah->ah_txq[queue].tqi_type == AR5K_TX_QUEUE_INACTIVE) - return -EIO; - - if (ah->ah_version == AR5K_AR5210) { - tx_queue = ath5k_hw_reg_read(ah, AR5K_CR); - - /* - * Set the queue by type on 5210 - */ - switch (ah->ah_txq[queue].tqi_type) { - case AR5K_TX_QUEUE_DATA: - tx_queue |= AR5K_CR_TXE0 & ~AR5K_CR_TXD0; - break; - case AR5K_TX_QUEUE_BEACON: - tx_queue |= AR5K_CR_TXE1 & ~AR5K_CR_TXD1; - ath5k_hw_reg_write(ah, AR5K_BCR_TQ1V | AR5K_BCR_BDMAE, - AR5K_BSR); - break; - case AR5K_TX_QUEUE_CAB: - tx_queue |= AR5K_CR_TXE1 & ~AR5K_CR_TXD1; - ath5k_hw_reg_write(ah, AR5K_BCR_TQ1FV | AR5K_BCR_TQ1V | - AR5K_BCR_BDMAE, AR5K_BSR); - break; - default: - return -EINVAL; - } - /* Start queue */ - ath5k_hw_reg_write(ah, tx_queue, AR5K_CR); - ath5k_hw_reg_read(ah, AR5K_CR); - } else { - /* Return if queue is disabled */ - if (AR5K_REG_READ_Q(ah, AR5K_QCU_TXD, queue)) - return -EIO; - - /* Start queue */ - AR5K_REG_WRITE_Q(ah, AR5K_QCU_TXE, queue); - } - - return 0; -} - -/* - * Stop DMA transmit for a specific queue - * (see also QCU/DCU functions) - */ -int ath5k_hw_stop_tx_dma(struct ath5k_hw *ah, unsigned int queue) -{ - unsigned int i = 100; - u32 tx_queue, pending; - - ATH5K_TRACE(ah->ah_sc); - AR5K_ASSERT_ENTRY(queue, ah->ah_capabilities.cap_queues.q_tx_num); - - /* Return if queue is declared inactive */ - if (ah->ah_txq[queue].tqi_type == AR5K_TX_QUEUE_INACTIVE) - return -EIO; - - if (ah->ah_version == AR5K_AR5210) { - tx_queue = ath5k_hw_reg_read(ah, AR5K_CR); - - /* - * Set by queue type - */ - switch (ah->ah_txq[queue].tqi_type) { - case AR5K_TX_QUEUE_DATA: - tx_queue |= AR5K_CR_TXD0 & ~AR5K_CR_TXE0; - break; - case AR5K_TX_QUEUE_BEACON: - case AR5K_TX_QUEUE_CAB: - /* XXX Fix me... */ - tx_queue |= AR5K_CR_TXD1 & ~AR5K_CR_TXD1; - ath5k_hw_reg_write(ah, 0, AR5K_BSR); - break; - default: - return -EINVAL; - } - - /* Stop queue */ - ath5k_hw_reg_write(ah, tx_queue, AR5K_CR); - ath5k_hw_reg_read(ah, AR5K_CR); - } else { - /* - * Schedule TX disable and wait until queue is empty - */ - AR5K_REG_WRITE_Q(ah, AR5K_QCU_TXD, queue); - - /*Check for pending frames*/ - do { - pending = ath5k_hw_reg_read(ah, - AR5K_QUEUE_STATUS(queue)) & - AR5K_QCU_STS_FRMPENDCNT; - udelay(100); - } while (--i && pending); - - /* Clear register */ - ath5k_hw_reg_write(ah, 0, AR5K_QCU_TXD); - if (pending) - return -EBUSY; - } - - /* TODO: Check for success else return error */ - return 0; -} - -/* - * Get the address of the TX Descriptor for a specific queue - * (see also QCU/DCU functions) - */ -u32 ath5k_hw_get_tx_buf(struct ath5k_hw *ah, unsigned int queue) -{ - u16 tx_reg; - - ATH5K_TRACE(ah->ah_sc); - AR5K_ASSERT_ENTRY(queue, ah->ah_capabilities.cap_queues.q_tx_num); - - /* - * Get the transmit queue descriptor pointer from the selected queue - */ - /*5210 doesn't have QCU*/ - if (ah->ah_version == AR5K_AR5210) { - switch (ah->ah_txq[queue].tqi_type) { - case AR5K_TX_QUEUE_DATA: - tx_reg = AR5K_NOQCU_TXDP0; - break; - case AR5K_TX_QUEUE_BEACON: - case AR5K_TX_QUEUE_CAB: - tx_reg = AR5K_NOQCU_TXDP1; - break; - default: - return 0xffffffff; - } - } else { - tx_reg = AR5K_QUEUE_TXDP(queue); - } - - return ath5k_hw_reg_read(ah, tx_reg); -} - -/* - * Set the address of the TX Descriptor for a specific queue - * (see also QCU/DCU functions) - */ -int ath5k_hw_put_tx_buf(struct ath5k_hw *ah, unsigned int queue, u32 phys_addr) -{ - u16 tx_reg; - - ATH5K_TRACE(ah->ah_sc); - AR5K_ASSERT_ENTRY(queue, ah->ah_capabilities.cap_queues.q_tx_num); - - /* - * Set the transmit queue descriptor pointer register by type - * on 5210 - */ - if (ah->ah_version == AR5K_AR5210) { - switch (ah->ah_txq[queue].tqi_type) { - case AR5K_TX_QUEUE_DATA: - tx_reg = AR5K_NOQCU_TXDP0; - break; - case AR5K_TX_QUEUE_BEACON: - case AR5K_TX_QUEUE_CAB: - tx_reg = AR5K_NOQCU_TXDP1; - break; - default: - return -EINVAL; - } - } else { - /* - * Set the transmit queue descriptor pointer for - * the selected queue on QCU for 5211+ - * (this won't work if the queue is still active) - */ - if (AR5K_REG_READ_Q(ah, AR5K_QCU_TXE, queue)) - return -EIO; - - tx_reg = AR5K_QUEUE_TXDP(queue); - } - - /* Set descriptor pointer */ - ath5k_hw_reg_write(ah, phys_addr, tx_reg); - - return 0; -} - -/* - * Update tx trigger level - */ -int ath5k_hw_update_tx_triglevel(struct ath5k_hw *ah, bool increase) -{ - u32 trigger_level, imr; - int ret = -EIO; - - ATH5K_TRACE(ah->ah_sc); - - /* - * Disable interrupts by setting the mask - */ - imr = ath5k_hw_set_intr(ah, ah->ah_imr & ~AR5K_INT_GLOBAL); - - /*TODO: Boundary check on trigger_level*/ - trigger_level = AR5K_REG_MS(ath5k_hw_reg_read(ah, AR5K_TXCFG), - AR5K_TXCFG_TXFULL); - - if (!increase) { - if (--trigger_level < AR5K_TUNE_MIN_TX_FIFO_THRES) - goto done; - } else - trigger_level += - ((AR5K_TUNE_MAX_TX_FIFO_THRES - trigger_level) / 2); - - /* - * Update trigger level on success - */ - if (ah->ah_version == AR5K_AR5210) - ath5k_hw_reg_write(ah, trigger_level, AR5K_TRIG_LVL); - else - AR5K_REG_WRITE_BITS(ah, AR5K_TXCFG, - AR5K_TXCFG_TXFULL, trigger_level); - - ret = 0; - -done: - /* - * Restore interrupt mask - */ - ath5k_hw_set_intr(ah, imr); - - return ret; -} - -/* - * Interrupt handling - */ - -/* - * Check if we have pending interrupts - */ -bool ath5k_hw_is_intr_pending(struct ath5k_hw *ah) -{ - ATH5K_TRACE(ah->ah_sc); - return ath5k_hw_reg_read(ah, AR5K_INTPEND); -} - -/* - * Get interrupt mask (ISR) - */ -int ath5k_hw_get_isr(struct ath5k_hw *ah, enum ath5k_int *interrupt_mask) -{ - u32 data; - - ATH5K_TRACE(ah->ah_sc); - - /* - * Read interrupt status from the Interrupt Status register - * on 5210 - */ - if (ah->ah_version == AR5K_AR5210) { - data = ath5k_hw_reg_read(ah, AR5K_ISR); - if (unlikely(data == AR5K_INT_NOCARD)) { - *interrupt_mask = data; - return -ENODEV; - } - } else { - /* - * Read interrupt status from the Read-And-Clear shadow register - * Note: PISR/SISR Not available on 5210 - */ - data = ath5k_hw_reg_read(ah, AR5K_RAC_PISR); - } - - /* - * Get abstract interrupt mask (driver-compatible) - */ - *interrupt_mask = (data & AR5K_INT_COMMON) & ah->ah_imr; - - if (unlikely(data == AR5K_INT_NOCARD)) - return -ENODEV; - - if (data & (AR5K_ISR_RXOK | AR5K_ISR_RXERR)) - *interrupt_mask |= AR5K_INT_RX; - - if (data & (AR5K_ISR_TXOK | AR5K_ISR_TXERR - | AR5K_ISR_TXDESC | AR5K_ISR_TXEOL)) - *interrupt_mask |= AR5K_INT_TX; - - if (ah->ah_version != AR5K_AR5210) { - /*HIU = Host Interface Unit (PCI etc)*/ - if (unlikely(data & (AR5K_ISR_HIUERR))) - *interrupt_mask |= AR5K_INT_FATAL; - - /*Beacon Not Ready*/ - if (unlikely(data & (AR5K_ISR_BNR))) - *interrupt_mask |= AR5K_INT_BNR; - } - - /* - * XXX: BMISS interrupts may occur after association. - * I found this on 5210 code but it needs testing. If this is - * true we should disable them before assoc and re-enable them - * after a successfull assoc + some jiffies. - */ -#if 0 - interrupt_mask &= ~AR5K_INT_BMISS; -#endif - - /* - * In case we didn't handle anything, - * print the register value. - */ - if (unlikely(*interrupt_mask == 0 && net_ratelimit())) - ATH5K_PRINTF("0x%08x\n", data); - - return 0; -} - -/* - * Set interrupt mask - */ -enum ath5k_int ath5k_hw_set_intr(struct ath5k_hw *ah, enum ath5k_int new_mask) -{ - enum ath5k_int old_mask, int_mask; - - /* - * Disable card interrupts to prevent any race conditions - * (they will be re-enabled afterwards). - */ - ath5k_hw_reg_write(ah, AR5K_IER_DISABLE, AR5K_IER); - ath5k_hw_reg_read(ah, AR5K_IER); - - old_mask = ah->ah_imr; - - /* - * Add additional, chipset-dependent interrupt mask flags - * and write them to the IMR (interrupt mask register). - */ - int_mask = new_mask & AR5K_INT_COMMON; - - if (new_mask & AR5K_INT_RX) - int_mask |= AR5K_IMR_RXOK | AR5K_IMR_RXERR | AR5K_IMR_RXORN | - AR5K_IMR_RXDESC; - - if (new_mask & AR5K_INT_TX) - int_mask |= AR5K_IMR_TXOK | AR5K_IMR_TXERR | AR5K_IMR_TXDESC | - AR5K_IMR_TXURN; - - if (ah->ah_version != AR5K_AR5210) { - if (new_mask & AR5K_INT_FATAL) { - int_mask |= AR5K_IMR_HIUERR; - AR5K_REG_ENABLE_BITS(ah, AR5K_SIMR2, AR5K_SIMR2_MCABT | - AR5K_SIMR2_SSERR | AR5K_SIMR2_DPERR); - } - } - - ath5k_hw_reg_write(ah, int_mask, AR5K_PIMR); - - /* Store new interrupt mask */ - ah->ah_imr = new_mask; - - /* ..re-enable interrupts */ - ath5k_hw_reg_write(ah, AR5K_IER_ENABLE, AR5K_IER); - ath5k_hw_reg_read(ah, AR5K_IER); - - return old_mask; -} - - -/*************************\ - EEPROM access functions -\*************************/ - -/* - * Read from eeprom - */ -static int ath5k_hw_eeprom_read(struct ath5k_hw *ah, u32 offset, u16 *data) -{ - u32 status, timeout; - - ATH5K_TRACE(ah->ah_sc); - /* - * Initialize EEPROM access - */ - if (ah->ah_version == AR5K_AR5210) { - AR5K_REG_ENABLE_BITS(ah, AR5K_PCICFG, AR5K_PCICFG_EEAE); - (void)ath5k_hw_reg_read(ah, AR5K_EEPROM_BASE + (4 * offset)); - } else { - ath5k_hw_reg_write(ah, offset, AR5K_EEPROM_BASE); - AR5K_REG_ENABLE_BITS(ah, AR5K_EEPROM_CMD, - AR5K_EEPROM_CMD_READ); - } - - for (timeout = AR5K_TUNE_REGISTER_TIMEOUT; timeout > 0; timeout--) { - status = ath5k_hw_reg_read(ah, AR5K_EEPROM_STATUS); - if (status & AR5K_EEPROM_STAT_RDDONE) { - if (status & AR5K_EEPROM_STAT_RDERR) - return -EIO; - *data = (u16)(ath5k_hw_reg_read(ah, AR5K_EEPROM_DATA) & - 0xffff); - return 0; - } - udelay(15); - } - - return -ETIMEDOUT; -} - -/* - * Write to eeprom - currently disabled, use at your own risk - */ -#if 0 -static int ath5k_hw_eeprom_write(struct ath5k_hw *ah, u32 offset, u16 data) -{ - - u32 status, timeout; - - ATH5K_TRACE(ah->ah_sc); - - /* - * Initialize eeprom access - */ - - if (ah->ah_version == AR5K_AR5210) { - AR5K_REG_ENABLE_BITS(ah, AR5K_PCICFG, AR5K_PCICFG_EEAE); - } else { - AR5K_REG_ENABLE_BITS(ah, AR5K_EEPROM_CMD, - AR5K_EEPROM_CMD_RESET); - } - - /* - * Write data to data register - */ - - if (ah->ah_version == AR5K_AR5210) { - ath5k_hw_reg_write(ah, data, AR5K_EEPROM_BASE + (4 * offset)); - } else { - ath5k_hw_reg_write(ah, offset, AR5K_EEPROM_BASE); - ath5k_hw_reg_write(ah, data, AR5K_EEPROM_DATA); - AR5K_REG_ENABLE_BITS(ah, AR5K_EEPROM_CMD, - AR5K_EEPROM_CMD_WRITE); - } - - /* - * Check status - */ - - for (timeout = AR5K_TUNE_REGISTER_TIMEOUT; timeout > 0; timeout--) { - status = ath5k_hw_reg_read(ah, AR5K_EEPROM_STATUS); - if (status & AR5K_EEPROM_STAT_WRDONE) { - if (status & AR5K_EEPROM_STAT_WRERR) - return EIO; - return 0; - } - udelay(15); - } - - ATH5K_ERR(ah->ah_sc, "EEPROM Write is disabled!"); - return -EIO; -} -#endif - -/* - * Translate binary channel representation in EEPROM to frequency - */ -static u16 ath5k_eeprom_bin2freq(struct ath5k_hw *ah, u16 bin, unsigned int mode) -{ - u16 val; - - if (bin == AR5K_EEPROM_CHANNEL_DIS) - return bin; - - if (mode == AR5K_EEPROM_MODE_11A) { - if (ah->ah_ee_version > AR5K_EEPROM_VERSION_3_2) - val = (5 * bin) + 4800; - else - val = bin > 62 ? (10 * 62) + (5 * (bin - 62)) + 5100 : - (bin * 10) + 5100; - } else { - if (ah->ah_ee_version > AR5K_EEPROM_VERSION_3_2) - val = bin + 2300; - else - val = bin + 2400; - } - - return val; -} - -/* - * Read antenna infos from eeprom - */ -static int ath5k_eeprom_read_ants(struct ath5k_hw *ah, u32 *offset, - unsigned int mode) -{ - struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; - u32 o = *offset; - u16 val; - int ret, i = 0; - - AR5K_EEPROM_READ(o++, val); - ee->ee_switch_settling[mode] = (val >> 8) & 0x7f; - ee->ee_ant_tx_rx[mode] = (val >> 2) & 0x3f; - ee->ee_ant_control[mode][i] = (val << 4) & 0x3f; - - AR5K_EEPROM_READ(o++, val); - ee->ee_ant_control[mode][i++] |= (val >> 12) & 0xf; - ee->ee_ant_control[mode][i++] = (val >> 6) & 0x3f; - ee->ee_ant_control[mode][i++] = val & 0x3f; - - AR5K_EEPROM_READ(o++, val); - ee->ee_ant_control[mode][i++] = (val >> 10) & 0x3f; - ee->ee_ant_control[mode][i++] = (val >> 4) & 0x3f; - ee->ee_ant_control[mode][i] = (val << 2) & 0x3f; - - AR5K_EEPROM_READ(o++, val); - ee->ee_ant_control[mode][i++] |= (val >> 14) & 0x3; - ee->ee_ant_control[mode][i++] = (val >> 8) & 0x3f; - ee->ee_ant_control[mode][i++] = (val >> 2) & 0x3f; - ee->ee_ant_control[mode][i] = (val << 4) & 0x3f; - - AR5K_EEPROM_READ(o++, val); - ee->ee_ant_control[mode][i++] |= (val >> 12) & 0xf; - ee->ee_ant_control[mode][i++] = (val >> 6) & 0x3f; - ee->ee_ant_control[mode][i++] = val & 0x3f; - - /* Get antenna modes */ - ah->ah_antenna[mode][0] = - (ee->ee_ant_control[mode][0] << 4) | 0x1; - ah->ah_antenna[mode][AR5K_ANT_FIXED_A] = - ee->ee_ant_control[mode][1] | - (ee->ee_ant_control[mode][2] << 6) | - (ee->ee_ant_control[mode][3] << 12) | - (ee->ee_ant_control[mode][4] << 18) | - (ee->ee_ant_control[mode][5] << 24); - ah->ah_antenna[mode][AR5K_ANT_FIXED_B] = - ee->ee_ant_control[mode][6] | - (ee->ee_ant_control[mode][7] << 6) | - (ee->ee_ant_control[mode][8] << 12) | - (ee->ee_ant_control[mode][9] << 18) | - (ee->ee_ant_control[mode][10] << 24); - - /* return new offset */ - *offset = o; - - return 0; -} - -/* - * Read supported modes from eeprom - */ -static int ath5k_eeprom_read_modes(struct ath5k_hw *ah, u32 *offset, - unsigned int mode) -{ - struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; - u32 o = *offset; - u16 val; - int ret; - - AR5K_EEPROM_READ(o++, val); - ee->ee_tx_end2xlna_enable[mode] = (val >> 8) & 0xff; - ee->ee_thr_62[mode] = val & 0xff; - - if (ah->ah_ee_version <= AR5K_EEPROM_VERSION_3_2) - ee->ee_thr_62[mode] = mode == AR5K_EEPROM_MODE_11A ? 15 : 28; - - AR5K_EEPROM_READ(o++, val); - ee->ee_tx_end2xpa_disable[mode] = (val >> 8) & 0xff; - ee->ee_tx_frm2xpa_enable[mode] = val & 0xff; - - AR5K_EEPROM_READ(o++, val); - ee->ee_pga_desired_size[mode] = (val >> 8) & 0xff; - - if ((val & 0xff) & 0x80) - ee->ee_noise_floor_thr[mode] = -((((val & 0xff) ^ 0xff)) + 1); - else - ee->ee_noise_floor_thr[mode] = val & 0xff; - - if (ah->ah_ee_version <= AR5K_EEPROM_VERSION_3_2) - ee->ee_noise_floor_thr[mode] = - mode == AR5K_EEPROM_MODE_11A ? -54 : -1; - - AR5K_EEPROM_READ(o++, val); - ee->ee_xlna_gain[mode] = (val >> 5) & 0xff; - ee->ee_x_gain[mode] = (val >> 1) & 0xf; - ee->ee_xpd[mode] = val & 0x1; - - if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_0) - ee->ee_fixed_bias[mode] = (val >> 13) & 0x1; - - if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_3_3) { - AR5K_EEPROM_READ(o++, val); - ee->ee_false_detect[mode] = (val >> 6) & 0x7f; - - if (mode == AR5K_EEPROM_MODE_11A) - ee->ee_xr_power[mode] = val & 0x3f; - else { - ee->ee_ob[mode][0] = val & 0x7; - ee->ee_db[mode][0] = (val >> 3) & 0x7; - } - } - - if (ah->ah_ee_version < AR5K_EEPROM_VERSION_3_4) { - ee->ee_i_gain[mode] = AR5K_EEPROM_I_GAIN; - ee->ee_cck_ofdm_power_delta = AR5K_EEPROM_CCK_OFDM_DELTA; - } else { - ee->ee_i_gain[mode] = (val >> 13) & 0x7; - - AR5K_EEPROM_READ(o++, val); - ee->ee_i_gain[mode] |= (val << 3) & 0x38; - - if (mode == AR5K_EEPROM_MODE_11G) - ee->ee_cck_ofdm_power_delta = (val >> 3) & 0xff; - } - - if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_0 && - mode == AR5K_EEPROM_MODE_11A) { - ee->ee_i_cal[mode] = (val >> 8) & 0x3f; - ee->ee_q_cal[mode] = (val >> 3) & 0x1f; - } - - if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_6 && - mode == AR5K_EEPROM_MODE_11G) - ee->ee_scaled_cck_delta = (val >> 11) & 0x1f; - - /* return new offset */ - *offset = o; - - return 0; -} - -/* - * Initialize eeprom & capabilities structs - */ -static int ath5k_eeprom_init(struct ath5k_hw *ah) -{ - struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; - unsigned int mode, i; - int ret; - u32 offset; - u16 val; - - /* Initial TX thermal adjustment values */ - ee->ee_tx_clip = 4; - ee->ee_pwd_84 = ee->ee_pwd_90 = 1; - ee->ee_gain_select = 1; - - /* - * Read values from EEPROM and store them in the capability structure - */ - AR5K_EEPROM_READ_HDR(AR5K_EEPROM_MAGIC, ee_magic); - AR5K_EEPROM_READ_HDR(AR5K_EEPROM_PROTECT, ee_protect); - AR5K_EEPROM_READ_HDR(AR5K_EEPROM_REG_DOMAIN, ee_regdomain); - AR5K_EEPROM_READ_HDR(AR5K_EEPROM_VERSION, ee_version); - AR5K_EEPROM_READ_HDR(AR5K_EEPROM_HDR, ee_header); - - /* Return if we have an old EEPROM */ - if (ah->ah_ee_version < AR5K_EEPROM_VERSION_3_0) - return 0; - -#ifdef notyet - /* - * Validate the checksum of the EEPROM date. There are some - * devices with invalid EEPROMs. - */ - for (cksum = 0, offset = 0; offset < AR5K_EEPROM_INFO_MAX; offset++) { - AR5K_EEPROM_READ(AR5K_EEPROM_INFO(offset), val); - cksum ^= val; - } - if (cksum != AR5K_EEPROM_INFO_CKSUM) { - ATH5K_ERR(ah->ah_sc, "Invalid EEPROM checksum 0x%04x\n", cksum); - return -EIO; - } -#endif - - AR5K_EEPROM_READ_HDR(AR5K_EEPROM_ANT_GAIN(ah->ah_ee_version), - ee_ant_gain); - - if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_0) { - AR5K_EEPROM_READ_HDR(AR5K_EEPROM_MISC0, ee_misc0); - AR5K_EEPROM_READ_HDR(AR5K_EEPROM_MISC1, ee_misc1); - } - - if (ah->ah_ee_version < AR5K_EEPROM_VERSION_3_3) { - AR5K_EEPROM_READ(AR5K_EEPROM_OBDB0_2GHZ, val); - ee->ee_ob[AR5K_EEPROM_MODE_11B][0] = val & 0x7; - ee->ee_db[AR5K_EEPROM_MODE_11B][0] = (val >> 3) & 0x7; - - AR5K_EEPROM_READ(AR5K_EEPROM_OBDB1_2GHZ, val); - ee->ee_ob[AR5K_EEPROM_MODE_11G][0] = val & 0x7; - ee->ee_db[AR5K_EEPROM_MODE_11G][0] = (val >> 3) & 0x7; - } - - /* - * Get conformance test limit values - */ - offset = AR5K_EEPROM_CTL(ah->ah_ee_version); - ee->ee_ctls = AR5K_EEPROM_N_CTLS(ah->ah_ee_version); - - for (i = 0; i < ee->ee_ctls; i++) { - AR5K_EEPROM_READ(offset++, val); - ee->ee_ctl[i] = (val >> 8) & 0xff; - ee->ee_ctl[i + 1] = val & 0xff; - } - - /* - * Get values for 802.11a (5GHz) - */ - mode = AR5K_EEPROM_MODE_11A; - - ee->ee_turbo_max_power[mode] = - AR5K_EEPROM_HDR_T_5GHZ_DBM(ee->ee_header); - - offset = AR5K_EEPROM_MODES_11A(ah->ah_ee_version); - - ret = ath5k_eeprom_read_ants(ah, &offset, mode); - if (ret) - return ret; - - AR5K_EEPROM_READ(offset++, val); - ee->ee_adc_desired_size[mode] = (s8)((val >> 8) & 0xff); - ee->ee_ob[mode][3] = (val >> 5) & 0x7; - ee->ee_db[mode][3] = (val >> 2) & 0x7; - ee->ee_ob[mode][2] = (val << 1) & 0x7; - - AR5K_EEPROM_READ(offset++, val); - ee->ee_ob[mode][2] |= (val >> 15) & 0x1; - ee->ee_db[mode][2] = (val >> 12) & 0x7; - ee->ee_ob[mode][1] = (val >> 9) & 0x7; - ee->ee_db[mode][1] = (val >> 6) & 0x7; - ee->ee_ob[mode][0] = (val >> 3) & 0x7; - ee->ee_db[mode][0] = val & 0x7; - - ret = ath5k_eeprom_read_modes(ah, &offset, mode); - if (ret) - return ret; - - if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_1) { - AR5K_EEPROM_READ(offset++, val); - ee->ee_margin_tx_rx[mode] = val & 0x3f; - } - - /* - * Get values for 802.11b (2.4GHz) - */ - mode = AR5K_EEPROM_MODE_11B; - offset = AR5K_EEPROM_MODES_11B(ah->ah_ee_version); - - ret = ath5k_eeprom_read_ants(ah, &offset, mode); - if (ret) - return ret; - - AR5K_EEPROM_READ(offset++, val); - ee->ee_adc_desired_size[mode] = (s8)((val >> 8) & 0xff); - ee->ee_ob[mode][1] = (val >> 4) & 0x7; - ee->ee_db[mode][1] = val & 0x7; - - ret = ath5k_eeprom_read_modes(ah, &offset, mode); - if (ret) - return ret; - - if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_0) { - AR5K_EEPROM_READ(offset++, val); - ee->ee_cal_pier[mode][0] = - ath5k_eeprom_bin2freq(ah, val & 0xff, mode); - ee->ee_cal_pier[mode][1] = - ath5k_eeprom_bin2freq(ah, (val >> 8) & 0xff, mode); - - AR5K_EEPROM_READ(offset++, val); - ee->ee_cal_pier[mode][2] = - ath5k_eeprom_bin2freq(ah, val & 0xff, mode); - } - - if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_1) - ee->ee_margin_tx_rx[mode] = (val >> 8) & 0x3f; - - /* - * Get values for 802.11g (2.4GHz) - */ - mode = AR5K_EEPROM_MODE_11G; - offset = AR5K_EEPROM_MODES_11G(ah->ah_ee_version); - - ret = ath5k_eeprom_read_ants(ah, &offset, mode); - if (ret) - return ret; - - AR5K_EEPROM_READ(offset++, val); - ee->ee_adc_desired_size[mode] = (s8)((val >> 8) & 0xff); - ee->ee_ob[mode][1] = (val >> 4) & 0x7; - ee->ee_db[mode][1] = val & 0x7; - - ret = ath5k_eeprom_read_modes(ah, &offset, mode); - if (ret) - return ret; - - if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_0) { - AR5K_EEPROM_READ(offset++, val); - ee->ee_cal_pier[mode][0] = - ath5k_eeprom_bin2freq(ah, val & 0xff, mode); - ee->ee_cal_pier[mode][1] = - ath5k_eeprom_bin2freq(ah, (val >> 8) & 0xff, mode); - - AR5K_EEPROM_READ(offset++, val); - ee->ee_turbo_max_power[mode] = val & 0x7f; - ee->ee_xr_power[mode] = (val >> 7) & 0x3f; - - AR5K_EEPROM_READ(offset++, val); - ee->ee_cal_pier[mode][2] = - ath5k_eeprom_bin2freq(ah, val & 0xff, mode); - - if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_1) - ee->ee_margin_tx_rx[mode] = (val >> 8) & 0x3f; - - AR5K_EEPROM_READ(offset++, val); - ee->ee_i_cal[mode] = (val >> 8) & 0x3f; - ee->ee_q_cal[mode] = (val >> 3) & 0x1f; - - if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_2) { - AR5K_EEPROM_READ(offset++, val); - ee->ee_cck_ofdm_gain_delta = val & 0xff; - } - } - - /* - * Read 5GHz EEPROM channels - */ - - return 0; -} - -/* - * Read the MAC address from eeprom - */ -static int ath5k_eeprom_read_mac(struct ath5k_hw *ah, u8 *mac) -{ - u8 mac_d[ETH_ALEN]; - u32 total, offset; - u16 data; - int octet, ret; - - memset(mac, 0, ETH_ALEN); - memset(mac_d, 0, ETH_ALEN); - - ret = ath5k_hw_eeprom_read(ah, 0x20, &data); - if (ret) - return ret; - - for (offset = 0x1f, octet = 0, total = 0; offset >= 0x1d; offset--) { - ret = ath5k_hw_eeprom_read(ah, offset, &data); - if (ret) - return ret; - - total += data; - mac_d[octet + 1] = data & 0xff; - mac_d[octet] = data >> 8; - octet += 2; - } - - memcpy(mac, mac_d, ETH_ALEN); - - if (!total || total == 3 * 0xffff) - return -EINVAL; - - return 0; -} - -/* - * Fill the capabilities struct - */ -static int ath5k_hw_get_capabilities(struct ath5k_hw *ah) -{ - u16 ee_header; - - ATH5K_TRACE(ah->ah_sc); - /* Capabilities stored in the EEPROM */ - ee_header = ah->ah_capabilities.cap_eeprom.ee_header; - - if (ah->ah_version == AR5K_AR5210) { - /* - * Set radio capabilities - * (The AR5110 only supports the middle 5GHz band) - */ - ah->ah_capabilities.cap_range.range_5ghz_min = 5120; - ah->ah_capabilities.cap_range.range_5ghz_max = 5430; - ah->ah_capabilities.cap_range.range_2ghz_min = 0; - ah->ah_capabilities.cap_range.range_2ghz_max = 0; - - /* Set supported modes */ - __set_bit(AR5K_MODE_11A, ah->ah_capabilities.cap_mode); - __set_bit(AR5K_MODE_11A_TURBO, ah->ah_capabilities.cap_mode); - } else { - /* - * XXX The tranceiver supports frequencies from 4920 to 6100GHz - * XXX and from 2312 to 2732GHz. There are problems with the - * XXX current ieee80211 implementation because the IEEE - * XXX channel mapping does not support negative channel - * XXX numbers (2312MHz is channel -19). Of course, this - * XXX doesn't matter because these channels are out of range - * XXX but some regulation domains like MKK (Japan) will - * XXX support frequencies somewhere around 4.8GHz. - */ - - /* - * Set radio capabilities - */ - - if (AR5K_EEPROM_HDR_11A(ee_header)) { - ah->ah_capabilities.cap_range.range_5ghz_min = 5005; /* 4920 */ - ah->ah_capabilities.cap_range.range_5ghz_max = 6100; - - /* Set supported modes */ - __set_bit(AR5K_MODE_11A, - ah->ah_capabilities.cap_mode); - __set_bit(AR5K_MODE_11A_TURBO, - ah->ah_capabilities.cap_mode); - if (ah->ah_version == AR5K_AR5212) - __set_bit(AR5K_MODE_11G_TURBO, - ah->ah_capabilities.cap_mode); - } - - /* Enable 802.11b if a 2GHz capable radio (2111/5112) is - * connected */ - if (AR5K_EEPROM_HDR_11B(ee_header) || - AR5K_EEPROM_HDR_11G(ee_header)) { - ah->ah_capabilities.cap_range.range_2ghz_min = 2412; /* 2312 */ - ah->ah_capabilities.cap_range.range_2ghz_max = 2732; - - if (AR5K_EEPROM_HDR_11B(ee_header)) - __set_bit(AR5K_MODE_11B, - ah->ah_capabilities.cap_mode); - - if (AR5K_EEPROM_HDR_11G(ee_header)) - __set_bit(AR5K_MODE_11G, - ah->ah_capabilities.cap_mode); - } - } - - /* GPIO */ - ah->ah_gpio_npins = AR5K_NUM_GPIO; - - /* Set number of supported TX queues */ - if (ah->ah_version == AR5K_AR5210) - ah->ah_capabilities.cap_queues.q_tx_num = - AR5K_NUM_TX_QUEUES_NOQCU; - else - ah->ah_capabilities.cap_queues.q_tx_num = AR5K_NUM_TX_QUEUES; - - return 0; -} - -/*********************************\ - Protocol Control Unit Functions -\*********************************/ - -/* - * Set Operation mode - */ -int ath5k_hw_set_opmode(struct ath5k_hw *ah) -{ - u32 pcu_reg, beacon_reg, low_id, high_id; - - pcu_reg = 0; - beacon_reg = 0; - - ATH5K_TRACE(ah->ah_sc); - - switch (ah->ah_op_mode) { - case IEEE80211_IF_TYPE_IBSS: - pcu_reg |= AR5K_STA_ID1_ADHOC | AR5K_STA_ID1_DESC_ANTENNA | - (ah->ah_version == AR5K_AR5210 ? - AR5K_STA_ID1_NO_PSPOLL : 0); - beacon_reg |= AR5K_BCR_ADHOC; - break; - - case IEEE80211_IF_TYPE_AP: - pcu_reg |= AR5K_STA_ID1_AP | AR5K_STA_ID1_RTS_DEF_ANTENNA | - (ah->ah_version == AR5K_AR5210 ? - AR5K_STA_ID1_NO_PSPOLL : 0); - beacon_reg |= AR5K_BCR_AP; - break; - - case IEEE80211_IF_TYPE_STA: - pcu_reg |= AR5K_STA_ID1_DEFAULT_ANTENNA | - (ah->ah_version == AR5K_AR5210 ? - AR5K_STA_ID1_PWR_SV : 0); - case IEEE80211_IF_TYPE_MNTR: - pcu_reg |= AR5K_STA_ID1_DEFAULT_ANTENNA | - (ah->ah_version == AR5K_AR5210 ? - AR5K_STA_ID1_NO_PSPOLL : 0); - break; - - default: - return -EINVAL; - } - - /* - * Set PCU registers - */ - low_id = AR5K_LOW_ID(ah->ah_sta_id); - high_id = AR5K_HIGH_ID(ah->ah_sta_id); - ath5k_hw_reg_write(ah, low_id, AR5K_STA_ID0); - ath5k_hw_reg_write(ah, pcu_reg | high_id, AR5K_STA_ID1); - - /* - * Set Beacon Control Register on 5210 - */ - if (ah->ah_version == AR5K_AR5210) - ath5k_hw_reg_write(ah, beacon_reg, AR5K_BCR); - - return 0; -} - -/* - * BSSID Functions - */ - -/* - * Get station id - */ -void ath5k_hw_get_lladdr(struct ath5k_hw *ah, u8 *mac) -{ - ATH5K_TRACE(ah->ah_sc); - memcpy(mac, ah->ah_sta_id, ETH_ALEN); -} - -/* - * Set station id - */ -int ath5k_hw_set_lladdr(struct ath5k_hw *ah, const u8 *mac) -{ - u32 low_id, high_id; - - ATH5K_TRACE(ah->ah_sc); - /* Set new station ID */ - memcpy(ah->ah_sta_id, mac, ETH_ALEN); - - low_id = AR5K_LOW_ID(mac); - high_id = AR5K_HIGH_ID(mac); - - ath5k_hw_reg_write(ah, low_id, AR5K_STA_ID0); - ath5k_hw_reg_write(ah, high_id, AR5K_STA_ID1); - - return 0; -} - -/* - * Set BSSID - */ -void ath5k_hw_set_associd(struct ath5k_hw *ah, const u8 *bssid, u16 assoc_id) -{ - u32 low_id, high_id; - u16 tim_offset = 0; - - /* - * Set simple BSSID mask on 5212 - */ - if (ah->ah_version == AR5K_AR5212) { - ath5k_hw_reg_write(ah, 0xffffffff, AR5K_BSS_IDM0); - ath5k_hw_reg_write(ah, 0xffffffff, AR5K_BSS_IDM1); - } - - /* - * Set BSSID which triggers the "SME Join" operation - */ - low_id = AR5K_LOW_ID(bssid); - high_id = AR5K_HIGH_ID(bssid); - ath5k_hw_reg_write(ah, low_id, AR5K_BSS_ID0); - ath5k_hw_reg_write(ah, high_id | ((assoc_id & 0x3fff) << - AR5K_BSS_ID1_AID_S), AR5K_BSS_ID1); - - if (assoc_id == 0) { - ath5k_hw_disable_pspoll(ah); - return; - } - - AR5K_REG_WRITE_BITS(ah, AR5K_BEACON, AR5K_BEACON_TIM, - tim_offset ? tim_offset + 4 : 0); - - ath5k_hw_enable_pspoll(ah, NULL, 0); -} -/** - * ath5k_hw_set_bssid_mask - set common bits we should listen to - * - * The bssid_mask is a utility used by AR5212 hardware to inform the hardware - * which bits of the interface's MAC address should be looked at when trying - * to decide which packets to ACK. In station mode every bit matters. In AP - * mode with a single BSS every bit matters as well. In AP mode with - * multiple BSSes not every bit matters. - * - * @ah: the &struct ath5k_hw - * @mask: the bssid_mask, a u8 array of size ETH_ALEN - * - * Note that this is a simple filter and *does* not filter out all - * relevant frames. Some non-relevant frames will get through, probability - * jocks are welcomed to compute. - * - * When handling multiple BSSes (or VAPs) you can get the BSSID mask by - * computing the set of: - * - * ~ ( MAC XOR BSSID ) - * - * When you do this you are essentially computing the common bits. Later it - * is assumed the harware will "and" (&) the BSSID mask with the MAC address - * to obtain the relevant bits which should match on the destination frame. - * - * Simple example: on your card you have have two BSSes you have created with - * BSSID-01 and BSSID-02. Lets assume BSSID-01 will not use the MAC address. - * There is another BSSID-03 but you are not part of it. For simplicity's sake, - * assuming only 4 bits for a mac address and for BSSIDs you can then have: - * - * \ - * MAC: 0001 | - * BSSID-01: 0100 | --> Belongs to us - * BSSID-02: 1001 | - * / - * ------------------- - * BSSID-03: 0110 | --> External - * ------------------- - * - * Our bssid_mask would then be: - * - * On loop iteration for BSSID-01: - * ~(0001 ^ 0100) -> ~(0101) - * -> 1010 - * bssid_mask = 1010 - * - * On loop iteration for BSSID-02: - * bssid_mask &= ~(0001 ^ 1001) - * bssid_mask = (1010) & ~(0001 ^ 1001) - * bssid_mask = (1010) & ~(1001) - * bssid_mask = (1010) & (0110) - * bssid_mask = 0010 - * - * A bssid_mask of 0010 means "only pay attention to the second least - * significant bit". This is because its the only bit common - * amongst the MAC and all BSSIDs we support. To findout what the real - * common bit is we can simply "&" the bssid_mask now with any BSSID we have - * or our MAC address (we assume the hardware uses the MAC address). - * - * Now, suppose there's an incoming frame for BSSID-03: - * - * IFRAME-01: 0110 - * - * An easy eye-inspeciton of this already should tell you that this frame - * will not pass our check. This is beacuse the bssid_mask tells the - * hardware to only look at the second least significant bit and the - * common bit amongst the MAC and BSSIDs is 0, this frame has the 2nd LSB - * as 1, which does not match 0. - * - * So with IFRAME-01 we *assume* the hardware will do: - * - * allow = (IFRAME-01 & bssid_mask) == (bssid_mask & MAC) ? 1 : 0; - * --> allow = (0110 & 0010) == (0010 & 0001) ? 1 : 0; - * --> allow = (0010) == 0000 ? 1 : 0; - * --> allow = 0 - * - * Lets now test a frame that should work: - * - * IFRAME-02: 0001 (we should allow) - * - * allow = (0001 & 1010) == 1010 - * - * allow = (IFRAME-02 & bssid_mask) == (bssid_mask & MAC) ? 1 : 0; - * --> allow = (0001 & 0010) == (0010 & 0001) ? 1 :0; - * --> allow = (0010) == (0010) - * --> allow = 1 - * - * Other examples: - * - * IFRAME-03: 0100 --> allowed - * IFRAME-04: 1001 --> allowed - * IFRAME-05: 1101 --> allowed but its not for us!!! - * - */ -int ath5k_hw_set_bssid_mask(struct ath5k_hw *ah, const u8 *mask) -{ - u32 low_id, high_id; - ATH5K_TRACE(ah->ah_sc); - - if (ah->ah_version == AR5K_AR5212) { - low_id = AR5K_LOW_ID(mask); - high_id = AR5K_HIGH_ID(mask); - - ath5k_hw_reg_write(ah, low_id, AR5K_BSS_IDM0); - ath5k_hw_reg_write(ah, high_id, AR5K_BSS_IDM1); - - return 0; - } - - return -EIO; -} - -/* - * Receive start/stop functions - */ - -/* - * Start receive on PCU - */ -void ath5k_hw_start_rx_pcu(struct ath5k_hw *ah) -{ - ATH5K_TRACE(ah->ah_sc); - AR5K_REG_DISABLE_BITS(ah, AR5K_DIAG_SW, AR5K_DIAG_SW_DIS_RX); - - /* TODO: ANI Support */ -} - -/* - * Stop receive on PCU - */ -void ath5k_hw_stop_pcu_recv(struct ath5k_hw *ah) -{ - ATH5K_TRACE(ah->ah_sc); - AR5K_REG_ENABLE_BITS(ah, AR5K_DIAG_SW, AR5K_DIAG_SW_DIS_RX); - - /* TODO: ANI Support */ -} - -/* - * RX Filter functions - */ - -/* - * Set multicast filter - */ -void ath5k_hw_set_mcast_filter(struct ath5k_hw *ah, u32 filter0, u32 filter1) -{ - ATH5K_TRACE(ah->ah_sc); - /* Set the multicat filter */ - ath5k_hw_reg_write(ah, filter0, AR5K_MCAST_FILTER0); - ath5k_hw_reg_write(ah, filter1, AR5K_MCAST_FILTER1); -} - -/* - * Set multicast filter by index - */ -int ath5k_hw_set_mcast_filterindex(struct ath5k_hw *ah, u32 index) -{ - - ATH5K_TRACE(ah->ah_sc); - if (index >= 64) - return -EINVAL; - else if (index >= 32) - AR5K_REG_ENABLE_BITS(ah, AR5K_MCAST_FILTER1, - (1 << (index - 32))); - else - AR5K_REG_ENABLE_BITS(ah, AR5K_MCAST_FILTER0, (1 << index)); - - return 0; -} - -/* - * Clear Multicast filter by index - */ -int ath5k_hw_clear_mcast_filter_idx(struct ath5k_hw *ah, u32 index) -{ - - ATH5K_TRACE(ah->ah_sc); - if (index >= 64) - return -EINVAL; - else if (index >= 32) - AR5K_REG_DISABLE_BITS(ah, AR5K_MCAST_FILTER1, - (1 << (index - 32))); - else - AR5K_REG_DISABLE_BITS(ah, AR5K_MCAST_FILTER0, (1 << index)); - - return 0; -} - -/* - * Get current rx filter - */ -u32 ath5k_hw_get_rx_filter(struct ath5k_hw *ah) -{ - u32 data, filter = 0; - - ATH5K_TRACE(ah->ah_sc); - filter = ath5k_hw_reg_read(ah, AR5K_RX_FILTER); - - /*Radar detection for 5212*/ - if (ah->ah_version == AR5K_AR5212) { - data = ath5k_hw_reg_read(ah, AR5K_PHY_ERR_FIL); - - if (data & AR5K_PHY_ERR_FIL_RADAR) - filter |= AR5K_RX_FILTER_RADARERR; - if (data & (AR5K_PHY_ERR_FIL_OFDM | AR5K_PHY_ERR_FIL_CCK)) - filter |= AR5K_RX_FILTER_PHYERR; - } - - return filter; -} - -/* - * Set rx filter - */ -void ath5k_hw_set_rx_filter(struct ath5k_hw *ah, u32 filter) -{ - u32 data = 0; - - ATH5K_TRACE(ah->ah_sc); - - /* Set PHY error filter register on 5212*/ - if (ah->ah_version == AR5K_AR5212) { - if (filter & AR5K_RX_FILTER_RADARERR) - data |= AR5K_PHY_ERR_FIL_RADAR; - if (filter & AR5K_RX_FILTER_PHYERR) - data |= AR5K_PHY_ERR_FIL_OFDM | AR5K_PHY_ERR_FIL_CCK; - } - - /* - * The AR5210 uses promiscous mode to detect radar activity - */ - if (ah->ah_version == AR5K_AR5210 && - (filter & AR5K_RX_FILTER_RADARERR)) { - filter &= ~AR5K_RX_FILTER_RADARERR; - filter |= AR5K_RX_FILTER_PROM; - } - - /*Zero length DMA*/ - if (data) - AR5K_REG_ENABLE_BITS(ah, AR5K_RXCFG, AR5K_RXCFG_ZLFDMA); - else - AR5K_REG_DISABLE_BITS(ah, AR5K_RXCFG, AR5K_RXCFG_ZLFDMA); - - /*Write RX Filter register*/ - ath5k_hw_reg_write(ah, filter & 0xff, AR5K_RX_FILTER); - - /*Write PHY error filter register on 5212*/ - if (ah->ah_version == AR5K_AR5212) - ath5k_hw_reg_write(ah, data, AR5K_PHY_ERR_FIL); - -} - -/* - * Beacon related functions - */ - -/* - * Get a 32bit TSF - */ -u32 ath5k_hw_get_tsf32(struct ath5k_hw *ah) -{ - ATH5K_TRACE(ah->ah_sc); - return ath5k_hw_reg_read(ah, AR5K_TSF_L32); -} - -/* - * Get the full 64bit TSF - */ -u64 ath5k_hw_get_tsf64(struct ath5k_hw *ah) -{ - u64 tsf = ath5k_hw_reg_read(ah, AR5K_TSF_U32); - ATH5K_TRACE(ah->ah_sc); - - return ath5k_hw_reg_read(ah, AR5K_TSF_L32) | (tsf << 32); -} - -/* - * Force a TSF reset - */ -void ath5k_hw_reset_tsf(struct ath5k_hw *ah) -{ - ATH5K_TRACE(ah->ah_sc); - AR5K_REG_ENABLE_BITS(ah, AR5K_BEACON, AR5K_BEACON_RESET_TSF); -} - -/* - * Initialize beacon timers - */ -void ath5k_hw_init_beacon(struct ath5k_hw *ah, u32 next_beacon, u32 interval) -{ - u32 timer1, timer2, timer3; - - ATH5K_TRACE(ah->ah_sc); - /* - * Set the additional timers by mode - */ - switch (ah->ah_op_mode) { - case IEEE80211_IF_TYPE_STA: - if (ah->ah_version == AR5K_AR5210) { - timer1 = 0xffffffff; - timer2 = 0xffffffff; - } else { - timer1 = 0x0000ffff; - timer2 = 0x0007ffff; - } - break; - - default: - timer1 = (next_beacon - AR5K_TUNE_DMA_BEACON_RESP) << 3; - timer2 = (next_beacon - AR5K_TUNE_SW_BEACON_RESP) << 3; - } - - timer3 = next_beacon + (ah->ah_atim_window ? ah->ah_atim_window : 1); - - /* - * Set the beacon register and enable all timers. - * (next beacon, DMA beacon, software beacon, ATIM window time) - */ - ath5k_hw_reg_write(ah, next_beacon, AR5K_TIMER0); - ath5k_hw_reg_write(ah, timer1, AR5K_TIMER1); - ath5k_hw_reg_write(ah, timer2, AR5K_TIMER2); - ath5k_hw_reg_write(ah, timer3, AR5K_TIMER3); - - ath5k_hw_reg_write(ah, interval & (AR5K_BEACON_PERIOD | - AR5K_BEACON_RESET_TSF | AR5K_BEACON_ENABLE), - AR5K_BEACON); -} - -#if 0 -/* - * Set beacon timers - */ -int ath5k_hw_set_beacon_timers(struct ath5k_hw *ah, - const struct ath5k_beacon_state *state) -{ - u32 cfp_period, next_cfp, dtim, interval, next_beacon; - - /* - * TODO: should be changed through *state - * review struct ath5k_beacon_state struct - * - * XXX: These are used for cfp period bellow, are they - * ok ? Is it O.K. for tsf here to be 0 or should we use - * get_tsf ? - */ - u32 dtim_count = 0; /* XXX */ - u32 cfp_count = 0; /* XXX */ - u32 tsf = 0; /* XXX */ - - ATH5K_TRACE(ah->ah_sc); - /* Return on an invalid beacon state */ - if (state->bs_interval < 1) - return -EINVAL; - - interval = state->bs_interval; - dtim = state->bs_dtim_period; - - /* - * PCF support? - */ - if (state->bs_cfp_period > 0) { - /* - * Enable PCF mode and set the CFP - * (Contention Free Period) and timer registers - */ - cfp_period = state->bs_cfp_period * state->bs_dtim_period * - state->bs_interval; - next_cfp = (cfp_count * state->bs_dtim_period + dtim_count) * - state->bs_interval; - - AR5K_REG_ENABLE_BITS(ah, AR5K_STA_ID1, - AR5K_STA_ID1_DEFAULT_ANTENNA | - AR5K_STA_ID1_PCF); - ath5k_hw_reg_write(ah, cfp_period, AR5K_CFP_PERIOD); - ath5k_hw_reg_write(ah, state->bs_cfp_max_duration, - AR5K_CFP_DUR); - ath5k_hw_reg_write(ah, (tsf + (next_cfp == 0 ? cfp_period : - next_cfp)) << 3, AR5K_TIMER2); - } else { - /* Disable PCF mode */ - AR5K_REG_DISABLE_BITS(ah, AR5K_STA_ID1, - AR5K_STA_ID1_DEFAULT_ANTENNA | - AR5K_STA_ID1_PCF); - } - - /* - * Enable the beacon timer register - */ - ath5k_hw_reg_write(ah, state->bs_next_beacon, AR5K_TIMER0); - - /* - * Start the beacon timers - */ - ath5k_hw_reg_write(ah, (ath5k_hw_reg_read(ah, AR5K_BEACON) &~ - (AR5K_BEACON_PERIOD | AR5K_BEACON_TIM)) | - AR5K_REG_SM(state->bs_tim_offset ? state->bs_tim_offset + 4 : 0, - AR5K_BEACON_TIM) | AR5K_REG_SM(state->bs_interval, - AR5K_BEACON_PERIOD), AR5K_BEACON); - - /* - * Write new beacon miss threshold, if it appears to be valid - * XXX: Figure out right values for min <= bs_bmiss_threshold <= max - * and return if its not in range. We can test this by reading value and - * setting value to a largest value and seeing which values register. - */ - - AR5K_REG_WRITE_BITS(ah, AR5K_RSSI_THR, AR5K_RSSI_THR_BMISS, - state->bs_bmiss_threshold); - - /* - * Set sleep control register - * XXX: Didn't find this in 5210 code but since this register - * exists also in ar5k's 5210 headers i leave it as common code. - */ - AR5K_REG_WRITE_BITS(ah, AR5K_SLEEP_CTL, AR5K_SLEEP_CTL_SLDUR, - (state->bs_sleep_duration - 3) << 3); - - /* - * Set enhanced sleep registers on 5212 - */ - if (ah->ah_version == AR5K_AR5212) { - if (state->bs_sleep_duration > state->bs_interval && - roundup(state->bs_sleep_duration, interval) == - state->bs_sleep_duration) - interval = state->bs_sleep_duration; - - if (state->bs_sleep_duration > dtim && (dtim == 0 || - roundup(state->bs_sleep_duration, dtim) == - state->bs_sleep_duration)) - dtim = state->bs_sleep_duration; - - if (interval > dtim) - return -EINVAL; - - next_beacon = interval == dtim ? state->bs_next_dtim : - state->bs_next_beacon; - - ath5k_hw_reg_write(ah, - AR5K_REG_SM((state->bs_next_dtim - 3) << 3, - AR5K_SLEEP0_NEXT_DTIM) | - AR5K_REG_SM(10, AR5K_SLEEP0_CABTO) | - AR5K_SLEEP0_ENH_SLEEP_EN | - AR5K_SLEEP0_ASSUME_DTIM, AR5K_SLEEP0); - - ath5k_hw_reg_write(ah, AR5K_REG_SM((next_beacon - 3) << 3, - AR5K_SLEEP1_NEXT_TIM) | - AR5K_REG_SM(10, AR5K_SLEEP1_BEACON_TO), AR5K_SLEEP1); - - ath5k_hw_reg_write(ah, - AR5K_REG_SM(interval, AR5K_SLEEP2_TIM_PER) | - AR5K_REG_SM(dtim, AR5K_SLEEP2_DTIM_PER), AR5K_SLEEP2); - } - - return 0; -} - -/* - * Reset beacon timers - */ -void ath5k_hw_reset_beacon(struct ath5k_hw *ah) -{ - ATH5K_TRACE(ah->ah_sc); - /* - * Disable beacon timer - */ - ath5k_hw_reg_write(ah, 0, AR5K_TIMER0); - - /* - * Disable some beacon register values - */ - AR5K_REG_DISABLE_BITS(ah, AR5K_STA_ID1, - AR5K_STA_ID1_DEFAULT_ANTENNA | AR5K_STA_ID1_PCF); - ath5k_hw_reg_write(ah, AR5K_BEACON_PERIOD, AR5K_BEACON); -} - -/* - * Wait for beacon queue to finish - */ -int ath5k_hw_beaconq_finish(struct ath5k_hw *ah, unsigned long phys_addr) -{ - unsigned int i; - int ret; - - ATH5K_TRACE(ah->ah_sc); - - /* 5210 doesn't have QCU*/ - if (ah->ah_version == AR5K_AR5210) { - /* - * Wait for beaconn queue to finish by checking - * Control Register and Beacon Status Register. - */ - for (i = AR5K_TUNE_BEACON_INTERVAL / 2; i > 0; i--) { - if (!(ath5k_hw_reg_read(ah, AR5K_BSR) & AR5K_BSR_TXQ1F) - || - !(ath5k_hw_reg_read(ah, AR5K_CR) & AR5K_BSR_TXQ1F)) - break; - udelay(10); - } - - /* Timeout... */ - if (i <= 0) { - /* - * Re-schedule the beacon queue - */ - ath5k_hw_reg_write(ah, phys_addr, AR5K_NOQCU_TXDP1); - ath5k_hw_reg_write(ah, AR5K_BCR_TQ1V | AR5K_BCR_BDMAE, - AR5K_BCR); - - return -EIO; - } - ret = 0; - } else { - /*5211/5212*/ - ret = ath5k_hw_register_timeout(ah, - AR5K_QUEUE_STATUS(AR5K_TX_QUEUE_ID_BEACON), - AR5K_QCU_STS_FRMPENDCNT, 0, false); - - if (AR5K_REG_READ_Q(ah, AR5K_QCU_TXE, AR5K_TX_QUEUE_ID_BEACON)) - return -EIO; - } - - return ret; -} -#endif - -/* - * Update mib counters (statistics) - */ -void ath5k_hw_update_mib_counters(struct ath5k_hw *ah, - struct ieee80211_low_level_stats *stats) -{ - ATH5K_TRACE(ah->ah_sc); - - /* Read-And-Clear */ - stats->dot11ACKFailureCount += ath5k_hw_reg_read(ah, AR5K_ACK_FAIL); - stats->dot11RTSFailureCount += ath5k_hw_reg_read(ah, AR5K_RTS_FAIL); - stats->dot11RTSSuccessCount += ath5k_hw_reg_read(ah, AR5K_RTS_OK); - stats->dot11FCSErrorCount += ath5k_hw_reg_read(ah, AR5K_FCS_FAIL); - - /* XXX: Should we use this to track beacon count ? - * -we read it anyway to clear the register */ - ath5k_hw_reg_read(ah, AR5K_BEACON_CNT); - - /* Reset profile count registers on 5212*/ - if (ah->ah_version == AR5K_AR5212) { - ath5k_hw_reg_write(ah, 0, AR5K_PROFCNT_TX); - ath5k_hw_reg_write(ah, 0, AR5K_PROFCNT_RX); - ath5k_hw_reg_write(ah, 0, AR5K_PROFCNT_RXCLR); - ath5k_hw_reg_write(ah, 0, AR5K_PROFCNT_CYCLE); - } -} - -/** ath5k_hw_set_ack_bitrate - set bitrate for ACKs - * - * @ah: the &struct ath5k_hw - * @high: determines if to use low bit rate or now - */ -void ath5k_hw_set_ack_bitrate_high(struct ath5k_hw *ah, bool high) -{ - if (ah->ah_version != AR5K_AR5212) - return; - else { - u32 val = AR5K_STA_ID1_BASE_RATE_11B | AR5K_STA_ID1_ACKCTS_6MB; - if (high) - AR5K_REG_ENABLE_BITS(ah, AR5K_STA_ID1, val); - else - AR5K_REG_DISABLE_BITS(ah, AR5K_STA_ID1, val); - } -} - - -/* - * ACK/CTS Timeouts - */ - -/* - * Set ACK timeout on PCU - */ -int ath5k_hw_set_ack_timeout(struct ath5k_hw *ah, unsigned int timeout) -{ - ATH5K_TRACE(ah->ah_sc); - if (ath5k_hw_clocktoh(AR5K_REG_MS(0xffffffff, AR5K_TIME_OUT_ACK), - ah->ah_turbo) <= timeout) - return -EINVAL; - - AR5K_REG_WRITE_BITS(ah, AR5K_TIME_OUT, AR5K_TIME_OUT_ACK, - ath5k_hw_htoclock(timeout, ah->ah_turbo)); - - return 0; -} - -/* - * Read the ACK timeout from PCU - */ -unsigned int ath5k_hw_get_ack_timeout(struct ath5k_hw *ah) -{ - ATH5K_TRACE(ah->ah_sc); - - return ath5k_hw_clocktoh(AR5K_REG_MS(ath5k_hw_reg_read(ah, - AR5K_TIME_OUT), AR5K_TIME_OUT_ACK), ah->ah_turbo); -} - -/* - * Set CTS timeout on PCU - */ -int ath5k_hw_set_cts_timeout(struct ath5k_hw *ah, unsigned int timeout) -{ - ATH5K_TRACE(ah->ah_sc); - if (ath5k_hw_clocktoh(AR5K_REG_MS(0xffffffff, AR5K_TIME_OUT_CTS), - ah->ah_turbo) <= timeout) - return -EINVAL; - - AR5K_REG_WRITE_BITS(ah, AR5K_TIME_OUT, AR5K_TIME_OUT_CTS, - ath5k_hw_htoclock(timeout, ah->ah_turbo)); - - return 0; -} - -/* - * Read CTS timeout from PCU - */ -unsigned int ath5k_hw_get_cts_timeout(struct ath5k_hw *ah) -{ - ATH5K_TRACE(ah->ah_sc); - return ath5k_hw_clocktoh(AR5K_REG_MS(ath5k_hw_reg_read(ah, - AR5K_TIME_OUT), AR5K_TIME_OUT_CTS), ah->ah_turbo); -} - -/* - * Key table (WEP) functions - */ - -int ath5k_hw_reset_key(struct ath5k_hw *ah, u16 entry) -{ - unsigned int i; - - ATH5K_TRACE(ah->ah_sc); - AR5K_ASSERT_ENTRY(entry, AR5K_KEYTABLE_SIZE); - - for (i = 0; i < AR5K_KEYCACHE_SIZE; i++) - ath5k_hw_reg_write(ah, 0, AR5K_KEYTABLE_OFF(entry, i)); - - /* - * Set NULL encryption on AR5212+ - * - * Note: AR5K_KEYTABLE_TYPE -> AR5K_KEYTABLE_OFF(entry, 5) - * AR5K_KEYTABLE_TYPE_NULL -> 0x00000007 - * - * Note2: Windows driver (ndiswrapper) sets this to - * 0x00000714 instead of 0x00000007 - */ - if (ah->ah_version > AR5K_AR5211) - ath5k_hw_reg_write(ah, AR5K_KEYTABLE_TYPE_NULL, - AR5K_KEYTABLE_TYPE(entry)); - - return 0; -} - -int ath5k_hw_is_key_valid(struct ath5k_hw *ah, u16 entry) -{ - ATH5K_TRACE(ah->ah_sc); - AR5K_ASSERT_ENTRY(entry, AR5K_KEYTABLE_SIZE); - - /* Check the validation flag at the end of the entry */ - return ath5k_hw_reg_read(ah, AR5K_KEYTABLE_MAC1(entry)) & - AR5K_KEYTABLE_VALID; -} - -int ath5k_hw_set_key(struct ath5k_hw *ah, u16 entry, - const struct ieee80211_key_conf *key, const u8 *mac) -{ - unsigned int i; - __le32 key_v[5] = {}; - u32 keytype; - - ATH5K_TRACE(ah->ah_sc); - - /* key->keylen comes in from mac80211 in bytes */ - - if (key->keylen > AR5K_KEYTABLE_SIZE / 8) - return -EOPNOTSUPP; - - switch (key->keylen) { - /* WEP 40-bit = 40-bit entered key + 24 bit IV = 64-bit */ - case 40 / 8: - memcpy(&key_v[0], key->key, 5); - keytype = AR5K_KEYTABLE_TYPE_40; - break; - - /* WEP 104-bit = 104-bit entered key + 24-bit IV = 128-bit */ - case 104 / 8: - memcpy(&key_v[0], &key->key[0], 6); - memcpy(&key_v[2], &key->key[6], 6); - memcpy(&key_v[4], &key->key[12], 1); - keytype = AR5K_KEYTABLE_TYPE_104; - break; - /* WEP 128-bit = 128-bit entered key + 24 bit IV = 152-bit */ - case 128 / 8: - memcpy(&key_v[0], &key->key[0], 6); - memcpy(&key_v[2], &key->key[6], 6); - memcpy(&key_v[4], &key->key[12], 4); - keytype = AR5K_KEYTABLE_TYPE_128; - break; - - default: - return -EINVAL; /* shouldn't happen */ - } - - for (i = 0; i < ARRAY_SIZE(key_v); i++) - ath5k_hw_reg_write(ah, le32_to_cpu(key_v[i]), - AR5K_KEYTABLE_OFF(entry, i)); - - ath5k_hw_reg_write(ah, keytype, AR5K_KEYTABLE_TYPE(entry)); - - return ath5k_hw_set_key_lladdr(ah, entry, mac); -} - -int ath5k_hw_set_key_lladdr(struct ath5k_hw *ah, u16 entry, const u8 *mac) -{ - u32 low_id, high_id; - - ATH5K_TRACE(ah->ah_sc); - /* Invalid entry (key table overflow) */ - AR5K_ASSERT_ENTRY(entry, AR5K_KEYTABLE_SIZE); - - /* MAC may be NULL if it's a broadcast key. In this case no need to - * to compute AR5K_LOW_ID and AR5K_HIGH_ID as we already know it. */ - if (unlikely(mac == NULL)) { - low_id = 0xffffffff; - high_id = 0xffff | AR5K_KEYTABLE_VALID; - } else { - low_id = AR5K_LOW_ID(mac); - high_id = AR5K_HIGH_ID(mac) | AR5K_KEYTABLE_VALID; - } - - ath5k_hw_reg_write(ah, low_id, AR5K_KEYTABLE_MAC0(entry)); - ath5k_hw_reg_write(ah, high_id, AR5K_KEYTABLE_MAC1(entry)); - - return 0; -} - - -/********************************************\ -Queue Control Unit, DFS Control Unit Functions -\********************************************/ - -/* - * Initialize a transmit queue - */ -int ath5k_hw_setup_tx_queue(struct ath5k_hw *ah, enum ath5k_tx_queue queue_type, - struct ath5k_txq_info *queue_info) -{ - unsigned int queue; - int ret; - - ATH5K_TRACE(ah->ah_sc); - - /* - * Get queue by type - */ - /*5210 only has 2 queues*/ - if (ah->ah_version == AR5K_AR5210) { - switch (queue_type) { - case AR5K_TX_QUEUE_DATA: - queue = AR5K_TX_QUEUE_ID_NOQCU_DATA; - break; - case AR5K_TX_QUEUE_BEACON: - case AR5K_TX_QUEUE_CAB: - queue = AR5K_TX_QUEUE_ID_NOQCU_BEACON; - break; - default: - return -EINVAL; - } - } else { - switch (queue_type) { - case AR5K_TX_QUEUE_DATA: - for (queue = AR5K_TX_QUEUE_ID_DATA_MIN; - ah->ah_txq[queue].tqi_type != - AR5K_TX_QUEUE_INACTIVE; queue++) { - - if (queue > AR5K_TX_QUEUE_ID_DATA_MAX) - return -EINVAL; - } - break; - case AR5K_TX_QUEUE_UAPSD: - queue = AR5K_TX_QUEUE_ID_UAPSD; - break; - case AR5K_TX_QUEUE_BEACON: - queue = AR5K_TX_QUEUE_ID_BEACON; - break; - case AR5K_TX_QUEUE_CAB: - queue = AR5K_TX_QUEUE_ID_CAB; - break; - case AR5K_TX_QUEUE_XR_DATA: - if (ah->ah_version != AR5K_AR5212) - ATH5K_ERR(ah->ah_sc, - "XR data queues only supported in" - " 5212!\n"); - queue = AR5K_TX_QUEUE_ID_XR_DATA; - break; - default: - return -EINVAL; - } - } - - /* - * Setup internal queue structure - */ - memset(&ah->ah_txq[queue], 0, sizeof(struct ath5k_txq_info)); - ah->ah_txq[queue].tqi_type = queue_type; - - if (queue_info != NULL) { - queue_info->tqi_type = queue_type; - ret = ath5k_hw_setup_tx_queueprops(ah, queue, queue_info); - if (ret) - return ret; - } - /* - * We use ah_txq_status to hold a temp value for - * the Secondary interrupt mask registers on 5211+ - * check out ath5k_hw_reset_tx_queue - */ - AR5K_Q_ENABLE_BITS(ah->ah_txq_status, queue); - - return queue; -} - -/* - * Setup a transmit queue - */ -int ath5k_hw_setup_tx_queueprops(struct ath5k_hw *ah, int queue, - const struct ath5k_txq_info *queue_info) -{ - ATH5K_TRACE(ah->ah_sc); - AR5K_ASSERT_ENTRY(queue, ah->ah_capabilities.cap_queues.q_tx_num); - - if (ah->ah_txq[queue].tqi_type == AR5K_TX_QUEUE_INACTIVE) - return -EIO; - - memcpy(&ah->ah_txq[queue], queue_info, sizeof(struct ath5k_txq_info)); - - /*XXX: Is this supported on 5210 ?*/ - if ((queue_info->tqi_type == AR5K_TX_QUEUE_DATA && - ((queue_info->tqi_subtype == AR5K_WME_AC_VI) || - (queue_info->tqi_subtype == AR5K_WME_AC_VO))) || - queue_info->tqi_type == AR5K_TX_QUEUE_UAPSD) - ah->ah_txq[queue].tqi_flags |= AR5K_TXQ_FLAG_POST_FR_BKOFF_DIS; - - return 0; -} - -/* - * Get properties for a specific transmit queue - */ -int ath5k_hw_get_tx_queueprops(struct ath5k_hw *ah, int queue, - struct ath5k_txq_info *queue_info) -{ - ATH5K_TRACE(ah->ah_sc); - memcpy(queue_info, &ah->ah_txq[queue], sizeof(struct ath5k_txq_info)); - return 0; -} - -/* - * Set a transmit queue inactive - */ -void ath5k_hw_release_tx_queue(struct ath5k_hw *ah, unsigned int queue) -{ - ATH5K_TRACE(ah->ah_sc); - if (WARN_ON(queue >= ah->ah_capabilities.cap_queues.q_tx_num)) - return; - - /* This queue will be skipped in further operations */ - ah->ah_txq[queue].tqi_type = AR5K_TX_QUEUE_INACTIVE; - /*For SIMR setup*/ - AR5K_Q_DISABLE_BITS(ah->ah_txq_status, queue); -} - -/* - * Set DFS params for a transmit queue - */ -int ath5k_hw_reset_tx_queue(struct ath5k_hw *ah, unsigned int queue) -{ - u32 cw_min, cw_max, retry_lg, retry_sh; - struct ath5k_txq_info *tq = &ah->ah_txq[queue]; - - ATH5K_TRACE(ah->ah_sc); - AR5K_ASSERT_ENTRY(queue, ah->ah_capabilities.cap_queues.q_tx_num); - - tq = &ah->ah_txq[queue]; - - if (tq->tqi_type == AR5K_TX_QUEUE_INACTIVE) - return 0; - - if (ah->ah_version == AR5K_AR5210) { - /* Only handle data queues, others will be ignored */ - if (tq->tqi_type != AR5K_TX_QUEUE_DATA) - return 0; - - /* Set Slot time */ - ath5k_hw_reg_write(ah, ah->ah_turbo ? - AR5K_INIT_SLOT_TIME_TURBO : AR5K_INIT_SLOT_TIME, - AR5K_SLOT_TIME); - /* Set ACK_CTS timeout */ - ath5k_hw_reg_write(ah, ah->ah_turbo ? - AR5K_INIT_ACK_CTS_TIMEOUT_TURBO : - AR5K_INIT_ACK_CTS_TIMEOUT, AR5K_SLOT_TIME); - /* Set Transmit Latency */ - ath5k_hw_reg_write(ah, ah->ah_turbo ? - AR5K_INIT_TRANSMIT_LATENCY_TURBO : - AR5K_INIT_TRANSMIT_LATENCY, AR5K_USEC_5210); - /* Set IFS0 */ - if (ah->ah_turbo) - ath5k_hw_reg_write(ah, ((AR5K_INIT_SIFS_TURBO + - (ah->ah_aifs + tq->tqi_aifs) * - AR5K_INIT_SLOT_TIME_TURBO) << - AR5K_IFS0_DIFS_S) | AR5K_INIT_SIFS_TURBO, - AR5K_IFS0); - else - ath5k_hw_reg_write(ah, ((AR5K_INIT_SIFS + - (ah->ah_aifs + tq->tqi_aifs) * - AR5K_INIT_SLOT_TIME) << AR5K_IFS0_DIFS_S) | - AR5K_INIT_SIFS, AR5K_IFS0); - - /* Set IFS1 */ - ath5k_hw_reg_write(ah, ah->ah_turbo ? - AR5K_INIT_PROTO_TIME_CNTRL_TURBO : - AR5K_INIT_PROTO_TIME_CNTRL, AR5K_IFS1); - /* Set AR5K_PHY_SETTLING */ - ath5k_hw_reg_write(ah, ah->ah_turbo ? - (ath5k_hw_reg_read(ah, AR5K_PHY_SETTLING) & ~0x7F) - | 0x38 : - (ath5k_hw_reg_read(ah, AR5K_PHY_SETTLING) & ~0x7F) - | 0x1C, - AR5K_PHY_SETTLING); - /* Set Frame Control Register */ - ath5k_hw_reg_write(ah, ah->ah_turbo ? - (AR5K_PHY_FRAME_CTL_INI | AR5K_PHY_TURBO_MODE | - AR5K_PHY_TURBO_SHORT | 0x2020) : - (AR5K_PHY_FRAME_CTL_INI | 0x1020), - AR5K_PHY_FRAME_CTL_5210); - } - - /* - * Calculate cwmin/max by channel mode - */ - cw_min = ah->ah_cw_min = AR5K_TUNE_CWMIN; - cw_max = ah->ah_cw_max = AR5K_TUNE_CWMAX; - ah->ah_aifs = AR5K_TUNE_AIFS; - /*XR is only supported on 5212*/ - if (IS_CHAN_XR(ah->ah_current_channel) && - ah->ah_version == AR5K_AR5212) { - cw_min = ah->ah_cw_min = AR5K_TUNE_CWMIN_XR; - cw_max = ah->ah_cw_max = AR5K_TUNE_CWMAX_XR; - ah->ah_aifs = AR5K_TUNE_AIFS_XR; - /*B mode is not supported on 5210*/ - } else if (IS_CHAN_B(ah->ah_current_channel) && - ah->ah_version != AR5K_AR5210) { - cw_min = ah->ah_cw_min = AR5K_TUNE_CWMIN_11B; - cw_max = ah->ah_cw_max = AR5K_TUNE_CWMAX_11B; - ah->ah_aifs = AR5K_TUNE_AIFS_11B; - } - - cw_min = 1; - while (cw_min < ah->ah_cw_min) - cw_min = (cw_min << 1) | 1; - - cw_min = tq->tqi_cw_min < 0 ? (cw_min >> (-tq->tqi_cw_min)) : - ((cw_min << tq->tqi_cw_min) + (1 << tq->tqi_cw_min) - 1); - cw_max = tq->tqi_cw_max < 0 ? (cw_max >> (-tq->tqi_cw_max)) : - ((cw_max << tq->tqi_cw_max) + (1 << tq->tqi_cw_max) - 1); - - /* - * Calculate and set retry limits - */ - if (ah->ah_software_retry) { - /* XXX Need to test this */ - retry_lg = ah->ah_limit_tx_retries; - retry_sh = retry_lg = retry_lg > AR5K_DCU_RETRY_LMT_SH_RETRY ? - AR5K_DCU_RETRY_LMT_SH_RETRY : retry_lg; - } else { - retry_lg = AR5K_INIT_LG_RETRY; - retry_sh = AR5K_INIT_SH_RETRY; - } - - /*No QCU/DCU [5210]*/ - if (ah->ah_version == AR5K_AR5210) { - ath5k_hw_reg_write(ah, - (cw_min << AR5K_NODCU_RETRY_LMT_CW_MIN_S) - | AR5K_REG_SM(AR5K_INIT_SLG_RETRY, - AR5K_NODCU_RETRY_LMT_SLG_RETRY) - | AR5K_REG_SM(AR5K_INIT_SSH_RETRY, - AR5K_NODCU_RETRY_LMT_SSH_RETRY) - | AR5K_REG_SM(retry_lg, AR5K_NODCU_RETRY_LMT_LG_RETRY) - | AR5K_REG_SM(retry_sh, AR5K_NODCU_RETRY_LMT_SH_RETRY), - AR5K_NODCU_RETRY_LMT); - } else { - /*QCU/DCU [5211+]*/ - ath5k_hw_reg_write(ah, - AR5K_REG_SM(AR5K_INIT_SLG_RETRY, - AR5K_DCU_RETRY_LMT_SLG_RETRY) | - AR5K_REG_SM(AR5K_INIT_SSH_RETRY, - AR5K_DCU_RETRY_LMT_SSH_RETRY) | - AR5K_REG_SM(retry_lg, AR5K_DCU_RETRY_LMT_LG_RETRY) | - AR5K_REG_SM(retry_sh, AR5K_DCU_RETRY_LMT_SH_RETRY), - AR5K_QUEUE_DFS_RETRY_LIMIT(queue)); - - /*===Rest is also for QCU/DCU only [5211+]===*/ - - /* - * Set initial content window (cw_min/cw_max) - * and arbitrated interframe space (aifs)... - */ - ath5k_hw_reg_write(ah, - AR5K_REG_SM(cw_min, AR5K_DCU_LCL_IFS_CW_MIN) | - AR5K_REG_SM(cw_max, AR5K_DCU_LCL_IFS_CW_MAX) | - AR5K_REG_SM(ah->ah_aifs + tq->tqi_aifs, - AR5K_DCU_LCL_IFS_AIFS), - AR5K_QUEUE_DFS_LOCAL_IFS(queue)); - - /* - * Set misc registers - */ - ath5k_hw_reg_write(ah, AR5K_QCU_MISC_DCU_EARLY, - AR5K_QUEUE_MISC(queue)); - - if (tq->tqi_cbr_period) { - ath5k_hw_reg_write(ah, AR5K_REG_SM(tq->tqi_cbr_period, - AR5K_QCU_CBRCFG_INTVAL) | - AR5K_REG_SM(tq->tqi_cbr_overflow_limit, - AR5K_QCU_CBRCFG_ORN_THRES), - AR5K_QUEUE_CBRCFG(queue)); - AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_MISC(queue), - AR5K_QCU_MISC_FRSHED_CBR); - if (tq->tqi_cbr_overflow_limit) - AR5K_REG_ENABLE_BITS(ah, - AR5K_QUEUE_MISC(queue), - AR5K_QCU_MISC_CBR_THRES_ENABLE); - } - - if (tq->tqi_ready_time) - ath5k_hw_reg_write(ah, AR5K_REG_SM(tq->tqi_ready_time, - AR5K_QCU_RDYTIMECFG_INTVAL) | - AR5K_QCU_RDYTIMECFG_ENABLE, - AR5K_QUEUE_RDYTIMECFG(queue)); - - if (tq->tqi_burst_time) { - ath5k_hw_reg_write(ah, AR5K_REG_SM(tq->tqi_burst_time, - AR5K_DCU_CHAN_TIME_DUR) | - AR5K_DCU_CHAN_TIME_ENABLE, - AR5K_QUEUE_DFS_CHANNEL_TIME(queue)); - - if (tq->tqi_flags & AR5K_TXQ_FLAG_RDYTIME_EXP_POLICY_ENABLE) - AR5K_REG_ENABLE_BITS(ah, - AR5K_QUEUE_MISC(queue), - AR5K_QCU_MISC_RDY_VEOL_POLICY); - } - - if (tq->tqi_flags & AR5K_TXQ_FLAG_BACKOFF_DISABLE) - ath5k_hw_reg_write(ah, AR5K_DCU_MISC_POST_FR_BKOFF_DIS, - AR5K_QUEUE_DFS_MISC(queue)); - - if (tq->tqi_flags & AR5K_TXQ_FLAG_FRAG_BURST_BACKOFF_ENABLE) - ath5k_hw_reg_write(ah, AR5K_DCU_MISC_BACKOFF_FRAG, - AR5K_QUEUE_DFS_MISC(queue)); - - /* - * Set registers by queue type - */ - switch (tq->tqi_type) { - case AR5K_TX_QUEUE_BEACON: - AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_MISC(queue), - AR5K_QCU_MISC_FRSHED_DBA_GT | - AR5K_QCU_MISC_CBREXP_BCN | - AR5K_QCU_MISC_BCN_ENABLE); - - AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_DFS_MISC(queue), - (AR5K_DCU_MISC_ARBLOCK_CTL_GLOBAL << - AR5K_DCU_MISC_ARBLOCK_CTL_S) | - AR5K_DCU_MISC_POST_FR_BKOFF_DIS | - AR5K_DCU_MISC_BCN_ENABLE); - - ath5k_hw_reg_write(ah, ((AR5K_TUNE_BEACON_INTERVAL - - (AR5K_TUNE_SW_BEACON_RESP - - AR5K_TUNE_DMA_BEACON_RESP) - - AR5K_TUNE_ADDITIONAL_SWBA_BACKOFF) * 1024) | - AR5K_QCU_RDYTIMECFG_ENABLE, - AR5K_QUEUE_RDYTIMECFG(queue)); - break; - - case AR5K_TX_QUEUE_CAB: - AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_MISC(queue), - AR5K_QCU_MISC_FRSHED_DBA_GT | - AR5K_QCU_MISC_CBREXP | - AR5K_QCU_MISC_CBREXP_BCN); - - AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_DFS_MISC(queue), - (AR5K_DCU_MISC_ARBLOCK_CTL_GLOBAL << - AR5K_DCU_MISC_ARBLOCK_CTL_S)); - break; - - case AR5K_TX_QUEUE_UAPSD: - AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_MISC(queue), - AR5K_QCU_MISC_CBREXP); - break; - - case AR5K_TX_QUEUE_DATA: - default: - break; - } - - /* - * Enable interrupts for this tx queue - * in the secondary interrupt mask registers - */ - if (tq->tqi_flags & AR5K_TXQ_FLAG_TXOKINT_ENABLE) - AR5K_Q_ENABLE_BITS(ah->ah_txq_imr_txok, queue); - - if (tq->tqi_flags & AR5K_TXQ_FLAG_TXERRINT_ENABLE) - AR5K_Q_ENABLE_BITS(ah->ah_txq_imr_txerr, queue); - - if (tq->tqi_flags & AR5K_TXQ_FLAG_TXURNINT_ENABLE) - AR5K_Q_ENABLE_BITS(ah->ah_txq_imr_txurn, queue); - - if (tq->tqi_flags & AR5K_TXQ_FLAG_TXDESCINT_ENABLE) - AR5K_Q_ENABLE_BITS(ah->ah_txq_imr_txdesc, queue); - - if (tq->tqi_flags & AR5K_TXQ_FLAG_TXEOLINT_ENABLE) - AR5K_Q_ENABLE_BITS(ah->ah_txq_imr_txeol, queue); - - - /* Update secondary interrupt mask registers */ - ah->ah_txq_imr_txok &= ah->ah_txq_status; - ah->ah_txq_imr_txerr &= ah->ah_txq_status; - ah->ah_txq_imr_txurn &= ah->ah_txq_status; - ah->ah_txq_imr_txdesc &= ah->ah_txq_status; - ah->ah_txq_imr_txeol &= ah->ah_txq_status; - - ath5k_hw_reg_write(ah, AR5K_REG_SM(ah->ah_txq_imr_txok, - AR5K_SIMR0_QCU_TXOK) | - AR5K_REG_SM(ah->ah_txq_imr_txdesc, - AR5K_SIMR0_QCU_TXDESC), AR5K_SIMR0); - ath5k_hw_reg_write(ah, AR5K_REG_SM(ah->ah_txq_imr_txerr, - AR5K_SIMR1_QCU_TXERR) | - AR5K_REG_SM(ah->ah_txq_imr_txeol, - AR5K_SIMR1_QCU_TXEOL), AR5K_SIMR1); - ath5k_hw_reg_write(ah, AR5K_REG_SM(ah->ah_txq_imr_txurn, - AR5K_SIMR2_QCU_TXURN), AR5K_SIMR2); - } - - return 0; -} - -/* - * Get number of pending frames - * for a specific queue [5211+] - */ -u32 ath5k_hw_num_tx_pending(struct ath5k_hw *ah, unsigned int queue) { - ATH5K_TRACE(ah->ah_sc); - AR5K_ASSERT_ENTRY(queue, ah->ah_capabilities.cap_queues.q_tx_num); - - /* Return if queue is declared inactive */ - if (ah->ah_txq[queue].tqi_type == AR5K_TX_QUEUE_INACTIVE) - return false; - - /* XXX: How about AR5K_CFG_TXCNT ? */ - if (ah->ah_version == AR5K_AR5210) - return false; - - return AR5K_QUEUE_STATUS(queue) & AR5K_QCU_STS_FRMPENDCNT; -} - -/* - * Set slot time - */ -int ath5k_hw_set_slot_time(struct ath5k_hw *ah, unsigned int slot_time) -{ - ATH5K_TRACE(ah->ah_sc); - if (slot_time < AR5K_SLOT_TIME_9 || slot_time > AR5K_SLOT_TIME_MAX) - return -EINVAL; - - if (ah->ah_version == AR5K_AR5210) - ath5k_hw_reg_write(ah, ath5k_hw_htoclock(slot_time, - ah->ah_turbo), AR5K_SLOT_TIME); - else - ath5k_hw_reg_write(ah, slot_time, AR5K_DCU_GBL_IFS_SLOT); - - return 0; -} - -/* - * Get slot time - */ -unsigned int ath5k_hw_get_slot_time(struct ath5k_hw *ah) -{ - ATH5K_TRACE(ah->ah_sc); - if (ah->ah_version == AR5K_AR5210) - return ath5k_hw_clocktoh(ath5k_hw_reg_read(ah, - AR5K_SLOT_TIME) & 0xffff, ah->ah_turbo); - else - return ath5k_hw_reg_read(ah, AR5K_DCU_GBL_IFS_SLOT) & 0xffff; -} - - -/******************************\ - Hardware Descriptor Functions -\******************************/ - -/* - * TX Descriptor - */ - -/* - * Initialize the 2-word tx descriptor on 5210/5211 - */ -static int -ath5k_hw_setup_2word_tx_desc(struct ath5k_hw *ah, struct ath5k_desc *desc, - unsigned int pkt_len, unsigned int hdr_len, enum ath5k_pkt_type type, - unsigned int tx_power, unsigned int tx_rate0, unsigned int tx_tries0, - unsigned int key_index, unsigned int antenna_mode, unsigned int flags, - unsigned int rtscts_rate, unsigned int rtscts_duration) -{ - u32 frame_type; - struct ath5k_hw_2w_tx_ctl *tx_ctl; - unsigned int frame_len; - - tx_ctl = &desc->ud.ds_tx5210.tx_ctl; - - /* - * Validate input - * - Zero retries don't make sense. - * - A zero rate will put the HW into a mode where it continously sends - * noise on the channel, so it is important to avoid this. - */ - if (unlikely(tx_tries0 == 0)) { - ATH5K_ERR(ah->ah_sc, "zero retries\n"); - WARN_ON(1); - return -EINVAL; - } - if (unlikely(tx_rate0 == 0)) { - ATH5K_ERR(ah->ah_sc, "zero rate\n"); - WARN_ON(1); - return -EINVAL; - } - - /* Clear descriptor */ - memset(&desc->ud.ds_tx5210, 0, sizeof(struct ath5k_hw_5210_tx_desc)); - - /* Setup control descriptor */ - - /* Verify and set frame length */ - - /* remove padding we might have added before */ - frame_len = pkt_len - (hdr_len & 3) + FCS_LEN; - - if (frame_len & ~AR5K_2W_TX_DESC_CTL0_FRAME_LEN) - return -EINVAL; - - tx_ctl->tx_control_0 = frame_len & AR5K_2W_TX_DESC_CTL0_FRAME_LEN; - - /* Verify and set buffer length */ - - /* NB: beacon's BufLen must be a multiple of 4 bytes */ - if(type == AR5K_PKT_TYPE_BEACON) - pkt_len = roundup(pkt_len, 4); - - if (pkt_len & ~AR5K_2W_TX_DESC_CTL1_BUF_LEN) - return -EINVAL; - - tx_ctl->tx_control_1 = pkt_len & AR5K_2W_TX_DESC_CTL1_BUF_LEN; - - /* - * Verify and set header length - * XXX: I only found that on 5210 code, does it work on 5211 ? - */ - if (ah->ah_version == AR5K_AR5210) { - if (hdr_len & ~AR5K_2W_TX_DESC_CTL0_HEADER_LEN) - return -EINVAL; - tx_ctl->tx_control_0 |= - AR5K_REG_SM(hdr_len, AR5K_2W_TX_DESC_CTL0_HEADER_LEN); - } - - /*Diferences between 5210-5211*/ - if (ah->ah_version == AR5K_AR5210) { - switch (type) { - case AR5K_PKT_TYPE_BEACON: - case AR5K_PKT_TYPE_PROBE_RESP: - frame_type = AR5K_AR5210_TX_DESC_FRAME_TYPE_NO_DELAY; - case AR5K_PKT_TYPE_PIFS: - frame_type = AR5K_AR5210_TX_DESC_FRAME_TYPE_PIFS; - default: - frame_type = type /*<< 2 ?*/; - } - - tx_ctl->tx_control_0 |= - AR5K_REG_SM(frame_type, AR5K_2W_TX_DESC_CTL0_FRAME_TYPE) | - AR5K_REG_SM(tx_rate0, AR5K_2W_TX_DESC_CTL0_XMIT_RATE); - } else { - tx_ctl->tx_control_0 |= - AR5K_REG_SM(tx_rate0, AR5K_2W_TX_DESC_CTL0_XMIT_RATE) | - AR5K_REG_SM(antenna_mode, AR5K_2W_TX_DESC_CTL0_ANT_MODE_XMIT); - tx_ctl->tx_control_1 |= - AR5K_REG_SM(type, AR5K_2W_TX_DESC_CTL1_FRAME_TYPE); - } -#define _TX_FLAGS(_c, _flag) \ - if (flags & AR5K_TXDESC_##_flag) \ - tx_ctl->tx_control_##_c |= \ - AR5K_2W_TX_DESC_CTL##_c##_##_flag - - _TX_FLAGS(0, CLRDMASK); - _TX_FLAGS(0, VEOL); - _TX_FLAGS(0, INTREQ); - _TX_FLAGS(0, RTSENA); - _TX_FLAGS(1, NOACK); - -#undef _TX_FLAGS - - /* - * WEP crap - */ - if (key_index != AR5K_TXKEYIX_INVALID) { - tx_ctl->tx_control_0 |= - AR5K_2W_TX_DESC_CTL0_ENCRYPT_KEY_VALID; - tx_ctl->tx_control_1 |= - AR5K_REG_SM(key_index, - AR5K_2W_TX_DESC_CTL1_ENCRYPT_KEY_INDEX); - } - - /* - * RTS/CTS Duration [5210 ?] - */ - if ((ah->ah_version == AR5K_AR5210) && - (flags & (AR5K_TXDESC_RTSENA | AR5K_TXDESC_CTSENA))) - tx_ctl->tx_control_1 |= rtscts_duration & - AR5K_2W_TX_DESC_CTL1_RTS_DURATION; - - return 0; -} - -/* - * Initialize the 4-word tx descriptor on 5212 - */ -static int ath5k_hw_setup_4word_tx_desc(struct ath5k_hw *ah, - struct ath5k_desc *desc, unsigned int pkt_len, unsigned int hdr_len, - enum ath5k_pkt_type type, unsigned int tx_power, unsigned int tx_rate0, - unsigned int tx_tries0, unsigned int key_index, - unsigned int antenna_mode, unsigned int flags, unsigned int rtscts_rate, - unsigned int rtscts_duration) -{ - struct ath5k_hw_4w_tx_ctl *tx_ctl; - unsigned int frame_len; - - ATH5K_TRACE(ah->ah_sc); - tx_ctl = &desc->ud.ds_tx5212.tx_ctl; - - /* - * Validate input - * - Zero retries don't make sense. - * - A zero rate will put the HW into a mode where it continously sends - * noise on the channel, so it is important to avoid this. - */ - if (unlikely(tx_tries0 == 0)) { - ATH5K_ERR(ah->ah_sc, "zero retries\n"); - WARN_ON(1); - return -EINVAL; - } - if (unlikely(tx_rate0 == 0)) { - ATH5K_ERR(ah->ah_sc, "zero rate\n"); - WARN_ON(1); - return -EINVAL; - } - - /* Clear descriptor */ - memset(&desc->ud.ds_tx5212, 0, sizeof(struct ath5k_hw_5212_tx_desc)); - - /* Setup control descriptor */ - - /* Verify and set frame length */ - - /* remove padding we might have added before */ - frame_len = pkt_len - (hdr_len & 3) + FCS_LEN; - - if (frame_len & ~AR5K_4W_TX_DESC_CTL0_FRAME_LEN) - return -EINVAL; - - tx_ctl->tx_control_0 = frame_len & AR5K_4W_TX_DESC_CTL0_FRAME_LEN; - - /* Verify and set buffer length */ - - /* NB: beacon's BufLen must be a multiple of 4 bytes */ - if(type == AR5K_PKT_TYPE_BEACON) - pkt_len = roundup(pkt_len, 4); - - if (pkt_len & ~AR5K_4W_TX_DESC_CTL1_BUF_LEN) - return -EINVAL; - - tx_ctl->tx_control_1 = pkt_len & AR5K_4W_TX_DESC_CTL1_BUF_LEN; - - tx_ctl->tx_control_0 |= - AR5K_REG_SM(tx_power, AR5K_4W_TX_DESC_CTL0_XMIT_POWER) | - AR5K_REG_SM(antenna_mode, AR5K_4W_TX_DESC_CTL0_ANT_MODE_XMIT); - tx_ctl->tx_control_1 |= AR5K_REG_SM(type, - AR5K_4W_TX_DESC_CTL1_FRAME_TYPE); - tx_ctl->tx_control_2 = AR5K_REG_SM(tx_tries0 + AR5K_TUNE_HWTXTRIES, - AR5K_4W_TX_DESC_CTL2_XMIT_TRIES0); - tx_ctl->tx_control_3 = tx_rate0 & AR5K_4W_TX_DESC_CTL3_XMIT_RATE0; - -#define _TX_FLAGS(_c, _flag) \ - if (flags & AR5K_TXDESC_##_flag) \ - tx_ctl->tx_control_##_c |= \ - AR5K_4W_TX_DESC_CTL##_c##_##_flag - - _TX_FLAGS(0, CLRDMASK); - _TX_FLAGS(0, VEOL); - _TX_FLAGS(0, INTREQ); - _TX_FLAGS(0, RTSENA); - _TX_FLAGS(0, CTSENA); - _TX_FLAGS(1, NOACK); - -#undef _TX_FLAGS - - /* - * WEP crap - */ - if (key_index != AR5K_TXKEYIX_INVALID) { - tx_ctl->tx_control_0 |= AR5K_4W_TX_DESC_CTL0_ENCRYPT_KEY_VALID; - tx_ctl->tx_control_1 |= AR5K_REG_SM(key_index, - AR5K_4W_TX_DESC_CTL1_ENCRYPT_KEY_INDEX); - } - - /* - * RTS/CTS - */ - if (flags & (AR5K_TXDESC_RTSENA | AR5K_TXDESC_CTSENA)) { - if ((flags & AR5K_TXDESC_RTSENA) && - (flags & AR5K_TXDESC_CTSENA)) - return -EINVAL; - tx_ctl->tx_control_2 |= rtscts_duration & - AR5K_4W_TX_DESC_CTL2_RTS_DURATION; - tx_ctl->tx_control_3 |= AR5K_REG_SM(rtscts_rate, - AR5K_4W_TX_DESC_CTL3_RTS_CTS_RATE); - } - - return 0; -} - -/* - * Initialize a 4-word multirate tx descriptor on 5212 - */ -static int -ath5k_hw_setup_xr_tx_desc(struct ath5k_hw *ah, struct ath5k_desc *desc, - unsigned int tx_rate1, u_int tx_tries1, u_int tx_rate2, u_int tx_tries2, - unsigned int tx_rate3, u_int tx_tries3) -{ - struct ath5k_hw_4w_tx_ctl *tx_ctl; - - /* - * Rates can be 0 as long as the retry count is 0 too. - * A zero rate and nonzero retry count will put the HW into a mode where - * it continously sends noise on the channel, so it is important to - * avoid this. - */ - if (unlikely((tx_rate1 == 0 && tx_tries1 != 0) || - (tx_rate2 == 0 && tx_tries2 != 0) || - (tx_rate3 == 0 && tx_tries3 != 0))) { - ATH5K_ERR(ah->ah_sc, "zero rate\n"); - WARN_ON(1); - return -EINVAL; - } - - if (ah->ah_version == AR5K_AR5212) { - tx_ctl = &desc->ud.ds_tx5212.tx_ctl; - -#define _XTX_TRIES(_n) \ - if (tx_tries##_n) { \ - tx_ctl->tx_control_2 |= \ - AR5K_REG_SM(tx_tries##_n, \ - AR5K_4W_TX_DESC_CTL2_XMIT_TRIES##_n); \ - tx_ctl->tx_control_3 |= \ - AR5K_REG_SM(tx_rate##_n, \ - AR5K_4W_TX_DESC_CTL3_XMIT_RATE##_n); \ - } - - _XTX_TRIES(1); - _XTX_TRIES(2); - _XTX_TRIES(3); - -#undef _XTX_TRIES - - return 1; - } - - return 0; -} - -/* - * Proccess the tx status descriptor on 5210/5211 - */ -static int ath5k_hw_proc_2word_tx_status(struct ath5k_hw *ah, - struct ath5k_desc *desc, struct ath5k_tx_status *ts) -{ - struct ath5k_hw_2w_tx_ctl *tx_ctl; - struct ath5k_hw_tx_status *tx_status; - - ATH5K_TRACE(ah->ah_sc); - - tx_ctl = &desc->ud.ds_tx5210.tx_ctl; - tx_status = &desc->ud.ds_tx5210.tx_stat; - - /* No frame has been send or error */ - if (unlikely((tx_status->tx_status_1 & AR5K_DESC_TX_STATUS1_DONE) == 0)) - return -EINPROGRESS; - - /* - * Get descriptor status - */ - ts->ts_tstamp = AR5K_REG_MS(tx_status->tx_status_0, - AR5K_DESC_TX_STATUS0_SEND_TIMESTAMP); - ts->ts_shortretry = AR5K_REG_MS(tx_status->tx_status_0, - AR5K_DESC_TX_STATUS0_SHORT_RETRY_COUNT); - ts->ts_longretry = AR5K_REG_MS(tx_status->tx_status_0, - AR5K_DESC_TX_STATUS0_LONG_RETRY_COUNT); - /*TODO: ts->ts_virtcol + test*/ - ts->ts_seqnum = AR5K_REG_MS(tx_status->tx_status_1, - AR5K_DESC_TX_STATUS1_SEQ_NUM); - ts->ts_rssi = AR5K_REG_MS(tx_status->tx_status_1, - AR5K_DESC_TX_STATUS1_ACK_SIG_STRENGTH); - ts->ts_antenna = 1; - ts->ts_status = 0; - ts->ts_rate = AR5K_REG_MS(tx_ctl->tx_control_0, - AR5K_2W_TX_DESC_CTL0_XMIT_RATE); - - if ((tx_status->tx_status_0 & AR5K_DESC_TX_STATUS0_FRAME_XMIT_OK) == 0){ - if (tx_status->tx_status_0 & - AR5K_DESC_TX_STATUS0_EXCESSIVE_RETRIES) - ts->ts_status |= AR5K_TXERR_XRETRY; - - if (tx_status->tx_status_0 & AR5K_DESC_TX_STATUS0_FIFO_UNDERRUN) - ts->ts_status |= AR5K_TXERR_FIFO; - - if (tx_status->tx_status_0 & AR5K_DESC_TX_STATUS0_FILTERED) - ts->ts_status |= AR5K_TXERR_FILT; - } - - return 0; -} - -/* - * Proccess a tx descriptor on 5212 - */ -static int ath5k_hw_proc_4word_tx_status(struct ath5k_hw *ah, - struct ath5k_desc *desc, struct ath5k_tx_status *ts) -{ - struct ath5k_hw_4w_tx_ctl *tx_ctl; - struct ath5k_hw_tx_status *tx_status; - - ATH5K_TRACE(ah->ah_sc); - - tx_ctl = &desc->ud.ds_tx5212.tx_ctl; - tx_status = &desc->ud.ds_tx5212.tx_stat; - - /* No frame has been send or error */ - if (unlikely((tx_status->tx_status_1 & AR5K_DESC_TX_STATUS1_DONE) == 0)) - return -EINPROGRESS; - - /* - * Get descriptor status - */ - ts->ts_tstamp = AR5K_REG_MS(tx_status->tx_status_0, - AR5K_DESC_TX_STATUS0_SEND_TIMESTAMP); - ts->ts_shortretry = AR5K_REG_MS(tx_status->tx_status_0, - AR5K_DESC_TX_STATUS0_SHORT_RETRY_COUNT); - ts->ts_longretry = AR5K_REG_MS(tx_status->tx_status_0, - AR5K_DESC_TX_STATUS0_LONG_RETRY_COUNT); - ts->ts_seqnum = AR5K_REG_MS(tx_status->tx_status_1, - AR5K_DESC_TX_STATUS1_SEQ_NUM); - ts->ts_rssi = AR5K_REG_MS(tx_status->tx_status_1, - AR5K_DESC_TX_STATUS1_ACK_SIG_STRENGTH); - ts->ts_antenna = (tx_status->tx_status_1 & - AR5K_DESC_TX_STATUS1_XMIT_ANTENNA) ? 2 : 1; - ts->ts_status = 0; - - switch (AR5K_REG_MS(tx_status->tx_status_1, - AR5K_DESC_TX_STATUS1_FINAL_TS_INDEX)) { - case 0: - ts->ts_rate = tx_ctl->tx_control_3 & - AR5K_4W_TX_DESC_CTL3_XMIT_RATE0; - break; - case 1: - ts->ts_rate = AR5K_REG_MS(tx_ctl->tx_control_3, - AR5K_4W_TX_DESC_CTL3_XMIT_RATE1); - ts->ts_longretry += AR5K_REG_MS(tx_ctl->tx_control_2, - AR5K_4W_TX_DESC_CTL2_XMIT_TRIES1); - break; - case 2: - ts->ts_rate = AR5K_REG_MS(tx_ctl->tx_control_3, - AR5K_4W_TX_DESC_CTL3_XMIT_RATE2); - ts->ts_longretry += AR5K_REG_MS(tx_ctl->tx_control_2, - AR5K_4W_TX_DESC_CTL2_XMIT_TRIES2); - break; - case 3: - ts->ts_rate = AR5K_REG_MS(tx_ctl->tx_control_3, - AR5K_4W_TX_DESC_CTL3_XMIT_RATE3); - ts->ts_longretry += AR5K_REG_MS(tx_ctl->tx_control_2, - AR5K_4W_TX_DESC_CTL2_XMIT_TRIES3); - break; - } - - if ((tx_status->tx_status_0 & AR5K_DESC_TX_STATUS0_FRAME_XMIT_OK) == 0){ - if (tx_status->tx_status_0 & - AR5K_DESC_TX_STATUS0_EXCESSIVE_RETRIES) - ts->ts_status |= AR5K_TXERR_XRETRY; - - if (tx_status->tx_status_0 & AR5K_DESC_TX_STATUS0_FIFO_UNDERRUN) - ts->ts_status |= AR5K_TXERR_FIFO; - - if (tx_status->tx_status_0 & AR5K_DESC_TX_STATUS0_FILTERED) - ts->ts_status |= AR5K_TXERR_FILT; - } - - return 0; -} - -/* - * RX Descriptor - */ - -/* - * Initialize an rx descriptor - */ -int ath5k_hw_setup_rx_desc(struct ath5k_hw *ah, struct ath5k_desc *desc, - u32 size, unsigned int flags) -{ - struct ath5k_hw_rx_ctl *rx_ctl; - - ATH5K_TRACE(ah->ah_sc); - rx_ctl = &desc->ud.ds_rx.rx_ctl; - - /* - * Clear the descriptor - * If we don't clean the status descriptor, - * while scanning we get too many results, - * most of them virtual, after some secs - * of scanning system hangs. M.F. - */ - memset(&desc->ud.ds_rx, 0, sizeof(struct ath5k_hw_all_rx_desc)); - - /* Setup descriptor */ - rx_ctl->rx_control_1 = size & AR5K_DESC_RX_CTL1_BUF_LEN; - if (unlikely(rx_ctl->rx_control_1 != size)) - return -EINVAL; - - if (flags & AR5K_RXDESC_INTREQ) - rx_ctl->rx_control_1 |= AR5K_DESC_RX_CTL1_INTREQ; - - return 0; -} - -/* - * Proccess the rx status descriptor on 5210/5211 - */ -static int ath5k_hw_proc_5210_rx_status(struct ath5k_hw *ah, - struct ath5k_desc *desc, struct ath5k_rx_status *rs) -{ - struct ath5k_hw_rx_status *rx_status; - - rx_status = &desc->ud.ds_rx.u.rx_stat; - - /* No frame received / not ready */ - if (unlikely((rx_status->rx_status_1 & AR5K_5210_RX_DESC_STATUS1_DONE) - == 0)) - return -EINPROGRESS; - - /* - * Frame receive status - */ - rs->rs_datalen = rx_status->rx_status_0 & - AR5K_5210_RX_DESC_STATUS0_DATA_LEN; - rs->rs_rssi = AR5K_REG_MS(rx_status->rx_status_0, - AR5K_5210_RX_DESC_STATUS0_RECEIVE_SIGNAL); - rs->rs_rate = AR5K_REG_MS(rx_status->rx_status_0, - AR5K_5210_RX_DESC_STATUS0_RECEIVE_RATE); - rs->rs_antenna = rx_status->rx_status_0 & - AR5K_5210_RX_DESC_STATUS0_RECEIVE_ANTENNA; - rs->rs_more = rx_status->rx_status_0 & - AR5K_5210_RX_DESC_STATUS0_MORE; - /* TODO: this timestamp is 13 bit, later on we assume 15 bit */ - rs->rs_tstamp = AR5K_REG_MS(rx_status->rx_status_1, - AR5K_5210_RX_DESC_STATUS1_RECEIVE_TIMESTAMP); - rs->rs_status = 0; - rs->rs_phyerr = 0; - - /* - * Key table status - */ - if (rx_status->rx_status_1 & AR5K_5210_RX_DESC_STATUS1_KEY_INDEX_VALID) - rs->rs_keyix = AR5K_REG_MS(rx_status->rx_status_1, - AR5K_5210_RX_DESC_STATUS1_KEY_INDEX); - else - rs->rs_keyix = AR5K_RXKEYIX_INVALID; - - /* - * Receive/descriptor errors - */ - if ((rx_status->rx_status_1 & - AR5K_5210_RX_DESC_STATUS1_FRAME_RECEIVE_OK) == 0) { - if (rx_status->rx_status_1 & - AR5K_5210_RX_DESC_STATUS1_CRC_ERROR) - rs->rs_status |= AR5K_RXERR_CRC; - - if (rx_status->rx_status_1 & - AR5K_5210_RX_DESC_STATUS1_FIFO_OVERRUN) - rs->rs_status |= AR5K_RXERR_FIFO; - - if (rx_status->rx_status_1 & - AR5K_5210_RX_DESC_STATUS1_PHY_ERROR) { - rs->rs_status |= AR5K_RXERR_PHY; - rs->rs_phyerr |= AR5K_REG_MS(rx_status->rx_status_1, - AR5K_5210_RX_DESC_STATUS1_PHY_ERROR); - } - - if (rx_status->rx_status_1 & - AR5K_5210_RX_DESC_STATUS1_DECRYPT_CRC_ERROR) - rs->rs_status |= AR5K_RXERR_DECRYPT; - } - - return 0; -} - -/* - * Proccess the rx status descriptor on 5212 - */ -static int ath5k_hw_proc_5212_rx_status(struct ath5k_hw *ah, - struct ath5k_desc *desc, struct ath5k_rx_status *rs) -{ - struct ath5k_hw_rx_status *rx_status; - struct ath5k_hw_rx_error *rx_err; - - ATH5K_TRACE(ah->ah_sc); - rx_status = &desc->ud.ds_rx.u.rx_stat; - - /* Overlay on error */ - rx_err = &desc->ud.ds_rx.u.rx_err; - - /* No frame received / not ready */ - if (unlikely((rx_status->rx_status_1 & AR5K_5212_RX_DESC_STATUS1_DONE) - == 0)) - return -EINPROGRESS; - - /* - * Frame receive status - */ - rs->rs_datalen = rx_status->rx_status_0 & - AR5K_5212_RX_DESC_STATUS0_DATA_LEN; - rs->rs_rssi = AR5K_REG_MS(rx_status->rx_status_0, - AR5K_5212_RX_DESC_STATUS0_RECEIVE_SIGNAL); - rs->rs_rate = AR5K_REG_MS(rx_status->rx_status_0, - AR5K_5212_RX_DESC_STATUS0_RECEIVE_RATE); - rs->rs_antenna = rx_status->rx_status_0 & - AR5K_5212_RX_DESC_STATUS0_RECEIVE_ANTENNA; - rs->rs_more = rx_status->rx_status_0 & - AR5K_5212_RX_DESC_STATUS0_MORE; - rs->rs_tstamp = AR5K_REG_MS(rx_status->rx_status_1, - AR5K_5212_RX_DESC_STATUS1_RECEIVE_TIMESTAMP); - rs->rs_status = 0; - rs->rs_phyerr = 0; - - /* - * Key table status - */ - if (rx_status->rx_status_1 & AR5K_5212_RX_DESC_STATUS1_KEY_INDEX_VALID) - rs->rs_keyix = AR5K_REG_MS(rx_status->rx_status_1, - AR5K_5212_RX_DESC_STATUS1_KEY_INDEX); - else - rs->rs_keyix = AR5K_RXKEYIX_INVALID; - - /* - * Receive/descriptor errors - */ - if ((rx_status->rx_status_1 & - AR5K_5212_RX_DESC_STATUS1_FRAME_RECEIVE_OK) == 0) { - if (rx_status->rx_status_1 & - AR5K_5212_RX_DESC_STATUS1_CRC_ERROR) - rs->rs_status |= AR5K_RXERR_CRC; - - if (rx_status->rx_status_1 & - AR5K_5212_RX_DESC_STATUS1_PHY_ERROR) { - rs->rs_status |= AR5K_RXERR_PHY; - rs->rs_phyerr |= AR5K_REG_MS(rx_err->rx_error_1, - AR5K_RX_DESC_ERROR1_PHY_ERROR_CODE); - } - - if (rx_status->rx_status_1 & - AR5K_5212_RX_DESC_STATUS1_DECRYPT_CRC_ERROR) - rs->rs_status |= AR5K_RXERR_DECRYPT; - - if (rx_status->rx_status_1 & - AR5K_5212_RX_DESC_STATUS1_MIC_ERROR) - rs->rs_status |= AR5K_RXERR_MIC; - } - - return 0; -} - - -/****************\ - GPIO Functions -\****************/ - -/* - * Set led state - */ -void ath5k_hw_set_ledstate(struct ath5k_hw *ah, unsigned int state) -{ - u32 led; - /*5210 has different led mode handling*/ - u32 led_5210; - - ATH5K_TRACE(ah->ah_sc); - - /*Reset led status*/ - if (ah->ah_version != AR5K_AR5210) - AR5K_REG_DISABLE_BITS(ah, AR5K_PCICFG, - AR5K_PCICFG_LEDMODE | AR5K_PCICFG_LED); - else - AR5K_REG_DISABLE_BITS(ah, AR5K_PCICFG, AR5K_PCICFG_LED); - - /* - * Some blinking values, define at your wish - */ - switch (state) { - case AR5K_LED_SCAN: - case AR5K_LED_AUTH: - led = AR5K_PCICFG_LEDMODE_PROP | AR5K_PCICFG_LED_PEND; - led_5210 = AR5K_PCICFG_LED_PEND | AR5K_PCICFG_LED_BCTL; - break; - - case AR5K_LED_INIT: - led = AR5K_PCICFG_LEDMODE_PROP | AR5K_PCICFG_LED_NONE; - led_5210 = AR5K_PCICFG_LED_PEND; - break; - - case AR5K_LED_ASSOC: - case AR5K_LED_RUN: - led = AR5K_PCICFG_LEDMODE_PROP | AR5K_PCICFG_LED_ASSOC; - led_5210 = AR5K_PCICFG_LED_ASSOC; - break; - - default: - led = AR5K_PCICFG_LEDMODE_PROM | AR5K_PCICFG_LED_NONE; - led_5210 = AR5K_PCICFG_LED_PEND; - break; - } - - /*Write new status to the register*/ - if (ah->ah_version != AR5K_AR5210) - AR5K_REG_ENABLE_BITS(ah, AR5K_PCICFG, led); - else - AR5K_REG_ENABLE_BITS(ah, AR5K_PCICFG, led_5210); -} - -/* - * Set GPIO outputs - */ -int ath5k_hw_set_gpio_output(struct ath5k_hw *ah, u32 gpio) -{ - ATH5K_TRACE(ah->ah_sc); - if (gpio > AR5K_NUM_GPIO) - return -EINVAL; - - ath5k_hw_reg_write(ah, (ath5k_hw_reg_read(ah, AR5K_GPIOCR) &~ - AR5K_GPIOCR_OUT(gpio)) | AR5K_GPIOCR_OUT(gpio), AR5K_GPIOCR); - - return 0; -} - -/* - * Set GPIO inputs - */ -int ath5k_hw_set_gpio_input(struct ath5k_hw *ah, u32 gpio) -{ - ATH5K_TRACE(ah->ah_sc); - if (gpio > AR5K_NUM_GPIO) - return -EINVAL; - - ath5k_hw_reg_write(ah, (ath5k_hw_reg_read(ah, AR5K_GPIOCR) &~ - AR5K_GPIOCR_OUT(gpio)) | AR5K_GPIOCR_IN(gpio), AR5K_GPIOCR); - - return 0; -} - -/* - * Get GPIO state - */ -u32 ath5k_hw_get_gpio(struct ath5k_hw *ah, u32 gpio) -{ - ATH5K_TRACE(ah->ah_sc); - if (gpio > AR5K_NUM_GPIO) - return 0xffffffff; - - /* GPIO input magic */ - return ((ath5k_hw_reg_read(ah, AR5K_GPIODI) & AR5K_GPIODI_M) >> gpio) & - 0x1; -} - -/* - * Set GPIO state - */ -int ath5k_hw_set_gpio(struct ath5k_hw *ah, u32 gpio, u32 val) -{ - u32 data; - ATH5K_TRACE(ah->ah_sc); - - if (gpio > AR5K_NUM_GPIO) - return -EINVAL; - - /* GPIO output magic */ - data = ath5k_hw_reg_read(ah, AR5K_GPIODO); - - data &= ~(1 << gpio); - data |= (val & 1) << gpio; - - ath5k_hw_reg_write(ah, data, AR5K_GPIODO); - - return 0; -} - -/* - * Initialize the GPIO interrupt (RFKill switch) - */ -void ath5k_hw_set_gpio_intr(struct ath5k_hw *ah, unsigned int gpio, - u32 interrupt_level) -{ - u32 data; - - ATH5K_TRACE(ah->ah_sc); - if (gpio > AR5K_NUM_GPIO) - return; - - /* - * Set the GPIO interrupt - */ - data = (ath5k_hw_reg_read(ah, AR5K_GPIOCR) & - ~(AR5K_GPIOCR_INT_SEL(gpio) | AR5K_GPIOCR_INT_SELH | - AR5K_GPIOCR_INT_ENA | AR5K_GPIOCR_OUT(gpio))) | - (AR5K_GPIOCR_INT_SEL(gpio) | AR5K_GPIOCR_INT_ENA); - - ath5k_hw_reg_write(ah, interrupt_level ? data : - (data | AR5K_GPIOCR_INT_SELH), AR5K_GPIOCR); - - ah->ah_imr |= AR5K_IMR_GPIO; - - /* Enable GPIO interrupts */ - AR5K_REG_ENABLE_BITS(ah, AR5K_PIMR, AR5K_IMR_GPIO); -} - - - - -/****************\ - Misc functions -\****************/ - -int ath5k_hw_get_capability(struct ath5k_hw *ah, - enum ath5k_capability_type cap_type, - u32 capability, u32 *result) -{ - ATH5K_TRACE(ah->ah_sc); - - switch (cap_type) { - case AR5K_CAP_NUM_TXQUEUES: - if (result) { - if (ah->ah_version == AR5K_AR5210) - *result = AR5K_NUM_TX_QUEUES_NOQCU; - else - *result = AR5K_NUM_TX_QUEUES; - goto yes; - } - case AR5K_CAP_VEOL: - goto yes; - case AR5K_CAP_COMPRESSION: - if (ah->ah_version == AR5K_AR5212) - goto yes; - else - goto no; - case AR5K_CAP_BURST: - goto yes; - case AR5K_CAP_TPC: - goto yes; - case AR5K_CAP_BSSIDMASK: - if (ah->ah_version == AR5K_AR5212) - goto yes; - else - goto no; - case AR5K_CAP_XR: - if (ah->ah_version == AR5K_AR5212) - goto yes; - else - goto no; - default: - goto no; - } - -no: - return -EINVAL; -yes: - return 0; -} - -static int ath5k_hw_enable_pspoll(struct ath5k_hw *ah, u8 *bssid, - u16 assoc_id) -{ - ATH5K_TRACE(ah->ah_sc); - - if (ah->ah_version == AR5K_AR5210) { - AR5K_REG_DISABLE_BITS(ah, AR5K_STA_ID1, - AR5K_STA_ID1_NO_PSPOLL | AR5K_STA_ID1_DEFAULT_ANTENNA); - return 0; - } - - return -EIO; -} - -static int ath5k_hw_disable_pspoll(struct ath5k_hw *ah) -{ - ATH5K_TRACE(ah->ah_sc); - - if (ah->ah_version == AR5K_AR5210) { - AR5K_REG_ENABLE_BITS(ah, AR5K_STA_ID1, - AR5K_STA_ID1_NO_PSPOLL | AR5K_STA_ID1_DEFAULT_ANTENNA); - return 0; - } - - return -EIO; -} diff --git a/drivers/net/wireless/ath5k/initvals.c b/drivers/net/wireless/ath5k/initvals.c index 2806b21bf90..ea2e1a20b49 100644 --- a/drivers/net/wireless/ath5k/initvals.c +++ b/drivers/net/wireless/ath5k/initvals.c @@ -1,9 +1,9 @@ /* * Initial register settings functions * - * Copyright (c) 2004, 2005, 2006, 2007 Reyk Floeter <reyk@openbsd.org> - * Copyright (c) 2006, 2007 Nick Kossifidis <mickflemm@gmail.com> - * Copyright (c) 2007 Jiri Slaby <jirislaby@gmail.com> + * Copyright (c) 2004-2007 Reyk Floeter <reyk@openbsd.org> + * Copyright (c) 2006-2007 Nick Kossifidis <mickflemm@gmail.com> + * Copyright (c) 2007-2008 Jiri Slaby <jirislaby@gmail.com> * * Permission to use, copy, modify, and distribute this software for any * purpose with or without fee is hereby granted, provided that the above @@ -20,13 +20,9 @@ */ #include "ath5k.h" -#include "base.h" #include "reg.h" - -/* - * MAC/PHY REGISTERS - */ - +#include "debug.h" +#include "base.h" /* * Mode-independent initial register writes @@ -65,10 +61,10 @@ static const struct ath5k_ini ar5210_ini[] = { { AR5K_TXCFG, AR5K_DMASIZE_128B }, { AR5K_RXCFG, AR5K_DMASIZE_128B }, { AR5K_CFG, AR5K_INIT_CFG }, - { AR5K_TOPS, AR5K_INIT_TOPS }, - { AR5K_RXNOFRM, AR5K_INIT_RXNOFRM }, - { AR5K_RPGTO, AR5K_INIT_RPGTO }, - { AR5K_TXNOFRM, AR5K_INIT_TXNOFRM }, + { AR5K_TOPS, 8 }, + { AR5K_RXNOFRM, 8 }, + { AR5K_RPGTO, 0 }, + { AR5K_TXNOFRM, 0 }, { AR5K_SFR, 0 }, { AR5K_MIBC, 0 }, { AR5K_MISC, 0 }, diff --git a/drivers/net/wireless/ath5k/pcu.c b/drivers/net/wireless/ath5k/pcu.c new file mode 100644 index 00000000000..5a896d1e2a2 --- /dev/null +++ b/drivers/net/wireless/ath5k/pcu.c @@ -0,0 +1,1002 @@ +/* + * Copyright (c) 2004-2008 Reyk Floeter <reyk@openbsd.org> + * Copyright (c) 2006-2008 Nick Kossifidis <mickflemm@gmail.com> + * Copyright (c) 2007-2008 Matthew W. S. Bell <mentor@madwifi.org> + * Copyright (c) 2007-2008 Luis Rodriguez <mcgrof@winlab.rutgers.edu> + * Copyright (c) 2007-2008 Pavel Roskin <proski@gnu.org> + * Copyright (c) 2007-2008 Jiri Slaby <jirislaby@gmail.com> + * + * Permission to use, copy, modify, and distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * + */ + +/*********************************\ +* Protocol Control Unit Functions * +\*********************************/ + +#include "ath5k.h" +#include "reg.h" +#include "debug.h" +#include "base.h" + +/*******************\ +* Generic functions * +\*******************/ + +/** + * ath5k_hw_set_opmode - Set PCU operating mode + * + * @ah: The &struct ath5k_hw + * + * Initialize PCU for the various operating modes (AP/STA etc) + * + * NOTE: ah->ah_op_mode must be set before calling this. + */ +int ath5k_hw_set_opmode(struct ath5k_hw *ah) +{ + u32 pcu_reg, beacon_reg, low_id, high_id; + + pcu_reg = 0; + beacon_reg = 0; + + ATH5K_TRACE(ah->ah_sc); + + switch (ah->ah_op_mode) { + case IEEE80211_IF_TYPE_IBSS: + pcu_reg |= AR5K_STA_ID1_ADHOC | AR5K_STA_ID1_DESC_ANTENNA | + (ah->ah_version == AR5K_AR5210 ? + AR5K_STA_ID1_NO_PSPOLL : 0); + beacon_reg |= AR5K_BCR_ADHOC; + break; + + case IEEE80211_IF_TYPE_AP: + case IEEE80211_IF_TYPE_MESH_POINT: + pcu_reg |= AR5K_STA_ID1_AP | AR5K_STA_ID1_RTS_DEF_ANTENNA | + (ah->ah_version == AR5K_AR5210 ? + AR5K_STA_ID1_NO_PSPOLL : 0); + beacon_reg |= AR5K_BCR_AP; + break; + + case IEEE80211_IF_TYPE_STA: + pcu_reg |= AR5K_STA_ID1_DEFAULT_ANTENNA | + (ah->ah_version == AR5K_AR5210 ? + AR5K_STA_ID1_PWR_SV : 0); + case IEEE80211_IF_TYPE_MNTR: + pcu_reg |= AR5K_STA_ID1_DEFAULT_ANTENNA | + (ah->ah_version == AR5K_AR5210 ? + AR5K_STA_ID1_NO_PSPOLL : 0); + break; + + default: + return -EINVAL; + } + + /* + * Set PCU registers + */ + low_id = AR5K_LOW_ID(ah->ah_sta_id); + high_id = AR5K_HIGH_ID(ah->ah_sta_id); + ath5k_hw_reg_write(ah, low_id, AR5K_STA_ID0); + ath5k_hw_reg_write(ah, pcu_reg | high_id, AR5K_STA_ID1); + + /* + * Set Beacon Control Register on 5210 + */ + if (ah->ah_version == AR5K_AR5210) + ath5k_hw_reg_write(ah, beacon_reg, AR5K_BCR); + + return 0; +} + +/** + * ath5k_hw_update - Update mib counters (mac layer statistics) + * + * @ah: The &struct ath5k_hw + * @stats: The &struct ieee80211_low_level_stats we use to track + * statistics on the driver + * + * Reads MIB counters from PCU and updates sw statistics. Must be + * called after a MIB interrupt. + */ +void ath5k_hw_update_mib_counters(struct ath5k_hw *ah, + struct ieee80211_low_level_stats *stats) +{ + ATH5K_TRACE(ah->ah_sc); + + /* Read-And-Clear */ + stats->dot11ACKFailureCount += ath5k_hw_reg_read(ah, AR5K_ACK_FAIL); + stats->dot11RTSFailureCount += ath5k_hw_reg_read(ah, AR5K_RTS_FAIL); + stats->dot11RTSSuccessCount += ath5k_hw_reg_read(ah, AR5K_RTS_OK); + stats->dot11FCSErrorCount += ath5k_hw_reg_read(ah, AR5K_FCS_FAIL); + + /* XXX: Should we use this to track beacon count ? + * -we read it anyway to clear the register */ + ath5k_hw_reg_read(ah, AR5K_BEACON_CNT); + + /* Reset profile count registers on 5212*/ + if (ah->ah_version == AR5K_AR5212) { + ath5k_hw_reg_write(ah, 0, AR5K_PROFCNT_TX); + ath5k_hw_reg_write(ah, 0, AR5K_PROFCNT_RX); + ath5k_hw_reg_write(ah, 0, AR5K_PROFCNT_RXCLR); + ath5k_hw_reg_write(ah, 0, AR5K_PROFCNT_CYCLE); + } +} + +/** + * ath5k_hw_set_ack_bitrate - set bitrate for ACKs + * + * @ah: The &struct ath5k_hw + * @high: Flag to determine if we want to use high transmition rate + * for ACKs or not + * + * If high flag is set, we tell hw to use a set of control rates based on + * the current transmition rate (check out control_rates array inside reset.c). + * If not hw just uses the lowest rate available for the current modulation + * scheme being used (1Mbit for CCK and 6Mbits for OFDM). + */ +void ath5k_hw_set_ack_bitrate_high(struct ath5k_hw *ah, bool high) +{ + if (ah->ah_version != AR5K_AR5212) + return; + else { + u32 val = AR5K_STA_ID1_BASE_RATE_11B | AR5K_STA_ID1_ACKCTS_6MB; + if (high) + AR5K_REG_ENABLE_BITS(ah, AR5K_STA_ID1, val); + else + AR5K_REG_DISABLE_BITS(ah, AR5K_STA_ID1, val); + } +} + + +/******************\ +* ACK/CTS Timeouts * +\******************/ + +/** + * ath5k_hw_het_ack_timeout - Get ACK timeout from PCU in usec + * + * @ah: The &struct ath5k_hw + */ +unsigned int ath5k_hw_get_ack_timeout(struct ath5k_hw *ah) +{ + ATH5K_TRACE(ah->ah_sc); + + return ath5k_hw_clocktoh(AR5K_REG_MS(ath5k_hw_reg_read(ah, + AR5K_TIME_OUT), AR5K_TIME_OUT_ACK), ah->ah_turbo); +} + +/** + * ath5k_hw_set_ack_timeout - Set ACK timeout on PCU + * + * @ah: The &struct ath5k_hw + * @timeout: Timeout in usec + */ +int ath5k_hw_set_ack_timeout(struct ath5k_hw *ah, unsigned int timeout) +{ + ATH5K_TRACE(ah->ah_sc); + if (ath5k_hw_clocktoh(AR5K_REG_MS(0xffffffff, AR5K_TIME_OUT_ACK), + ah->ah_turbo) <= timeout) + return -EINVAL; + + AR5K_REG_WRITE_BITS(ah, AR5K_TIME_OUT, AR5K_TIME_OUT_ACK, + ath5k_hw_htoclock(timeout, ah->ah_turbo)); + + return 0; +} + +/** + * ath5k_hw_get_cts_timeout - Get CTS timeout from PCU in usec + * + * @ah: The &struct ath5k_hw + */ +unsigned int ath5k_hw_get_cts_timeout(struct ath5k_hw *ah) +{ + ATH5K_TRACE(ah->ah_sc); + return ath5k_hw_clocktoh(AR5K_REG_MS(ath5k_hw_reg_read(ah, + AR5K_TIME_OUT), AR5K_TIME_OUT_CTS), ah->ah_turbo); +} + +/** + * ath5k_hw_set_cts_timeout - Set CTS timeout on PCU + * + * @ah: The &struct ath5k_hw + * @timeout: Timeout in usec + */ +int ath5k_hw_set_cts_timeout(struct ath5k_hw *ah, unsigned int timeout) +{ + ATH5K_TRACE(ah->ah_sc); + if (ath5k_hw_clocktoh(AR5K_REG_MS(0xffffffff, AR5K_TIME_OUT_CTS), + ah->ah_turbo) <= timeout) + return -EINVAL; + + AR5K_REG_WRITE_BITS(ah, AR5K_TIME_OUT, AR5K_TIME_OUT_CTS, + ath5k_hw_htoclock(timeout, ah->ah_turbo)); + + return 0; +} + + +/****************\ +* BSSID handling * +\****************/ + +/** + * ath5k_hw_get_lladdr - Get station id + * + * @ah: The &struct ath5k_hw + * @mac: The card's mac address + * + * Initialize ah->ah_sta_id using the mac address provided + * (just a memcpy). + * + * TODO: Remove it once we merge ath5k_softc and ath5k_hw + */ +void ath5k_hw_get_lladdr(struct ath5k_hw *ah, u8 *mac) +{ + ATH5K_TRACE(ah->ah_sc); + memcpy(mac, ah->ah_sta_id, ETH_ALEN); +} + +/** + * ath5k_hw_set_lladdr - Set station id + * + * @ah: The &struct ath5k_hw + * @mac: The card's mac address + * + * Set station id on hw using the provided mac address + */ +int ath5k_hw_set_lladdr(struct ath5k_hw *ah, const u8 *mac) +{ + u32 low_id, high_id; + + ATH5K_TRACE(ah->ah_sc); + /* Set new station ID */ + memcpy(ah->ah_sta_id, mac, ETH_ALEN); + + low_id = AR5K_LOW_ID(mac); + high_id = AR5K_HIGH_ID(mac); + + ath5k_hw_reg_write(ah, low_id, AR5K_STA_ID0); + ath5k_hw_reg_write(ah, high_id, AR5K_STA_ID1); + + return 0; +} + +/** + * ath5k_hw_set_associd - Set BSSID for association + * + * @ah: The &struct ath5k_hw + * @bssid: BSSID + * @assoc_id: Assoc id + * + * Sets the BSSID which trigers the "SME Join" operation + */ +void ath5k_hw_set_associd(struct ath5k_hw *ah, const u8 *bssid, u16 assoc_id) +{ + u32 low_id, high_id; + u16 tim_offset = 0; + + /* + * Set simple BSSID mask on 5212 + */ + if (ah->ah_version == AR5K_AR5212) { + ath5k_hw_reg_write(ah, 0xffffffff, AR5K_BSS_IDM0); + ath5k_hw_reg_write(ah, 0xffffffff, AR5K_BSS_IDM1); + } + + /* + * Set BSSID which triggers the "SME Join" operation + */ + low_id = AR5K_LOW_ID(bssid); + high_id = AR5K_HIGH_ID(bssid); + ath5k_hw_reg_write(ah, low_id, AR5K_BSS_ID0); + ath5k_hw_reg_write(ah, high_id | ((assoc_id & 0x3fff) << + AR5K_BSS_ID1_AID_S), AR5K_BSS_ID1); + + if (assoc_id == 0) { + ath5k_hw_disable_pspoll(ah); + return; + } + + AR5K_REG_WRITE_BITS(ah, AR5K_BEACON, AR5K_BEACON_TIM, + tim_offset ? tim_offset + 4 : 0); + + ath5k_hw_enable_pspoll(ah, NULL, 0); +} + +/** + * ath5k_hw_set_bssid_mask - filter out bssids we listen + * + * @ah: the &struct ath5k_hw + * @mask: the bssid_mask, a u8 array of size ETH_ALEN + * + * BSSID masking is a method used by AR5212 and newer hardware to inform PCU + * which bits of the interface's MAC address should be looked at when trying + * to decide which packets to ACK. In station mode and AP mode with a single + * BSS every bit matters since we lock to only one BSS. In AP mode with + * multiple BSSes (virtual interfaces) not every bit matters because hw must + * accept frames for all BSSes and so we tweak some bits of our mac address + * in order to have multiple BSSes. + * + * NOTE: This is a simple filter and does *not* filter out all + * relevant frames. Some frames that are not for us might get ACKed from us + * by PCU because they just match the mask. + * + * When handling multiple BSSes you can get the BSSID mask by computing the + * set of ~ ( MAC XOR BSSID ) for all bssids we handle. + * + * When you do this you are essentially computing the common bits of all your + * BSSes. Later it is assumed the harware will "and" (&) the BSSID mask with + * the MAC address to obtain the relevant bits and compare the result with + * (frame's BSSID & mask) to see if they match. + */ +/* + * Simple example: on your card you have have two BSSes you have created with + * BSSID-01 and BSSID-02. Lets assume BSSID-01 will not use the MAC address. + * There is another BSSID-03 but you are not part of it. For simplicity's sake, + * assuming only 4 bits for a mac address and for BSSIDs you can then have: + * + * \ + * MAC: 0001 | + * BSSID-01: 0100 | --> Belongs to us + * BSSID-02: 1001 | + * / + * ------------------- + * BSSID-03: 0110 | --> External + * ------------------- + * + * Our bssid_mask would then be: + * + * On loop iteration for BSSID-01: + * ~(0001 ^ 0100) -> ~(0101) + * -> 1010 + * bssid_mask = 1010 + * + * On loop iteration for BSSID-02: + * bssid_mask &= ~(0001 ^ 1001) + * bssid_mask = (1010) & ~(0001 ^ 1001) + * bssid_mask = (1010) & ~(1001) + * bssid_mask = (1010) & (0110) + * bssid_mask = 0010 + * + * A bssid_mask of 0010 means "only pay attention to the second least + * significant bit". This is because its the only bit common + * amongst the MAC and all BSSIDs we support. To findout what the real + * common bit is we can simply "&" the bssid_mask now with any BSSID we have + * or our MAC address (we assume the hardware uses the MAC address). + * + * Now, suppose there's an incoming frame for BSSID-03: + * + * IFRAME-01: 0110 + * + * An easy eye-inspeciton of this already should tell you that this frame + * will not pass our check. This is beacuse the bssid_mask tells the + * hardware to only look at the second least significant bit and the + * common bit amongst the MAC and BSSIDs is 0, this frame has the 2nd LSB + * as 1, which does not match 0. + * + * So with IFRAME-01 we *assume* the hardware will do: + * + * allow = (IFRAME-01 & bssid_mask) == (bssid_mask & MAC) ? 1 : 0; + * --> allow = (0110 & 0010) == (0010 & 0001) ? 1 : 0; + * --> allow = (0010) == 0000 ? 1 : 0; + * --> allow = 0 + * + * Lets now test a frame that should work: + * + * IFRAME-02: 0001 (we should allow) + * + * allow = (0001 & 1010) == 1010 + * + * allow = (IFRAME-02 & bssid_mask) == (bssid_mask & MAC) ? 1 : 0; + * --> allow = (0001 & 0010) == (0010 & 0001) ? 1 :0; + * --> allow = (0010) == (0010) + * --> allow = 1 + * + * Other examples: + * + * IFRAME-03: 0100 --> allowed + * IFRAME-04: 1001 --> allowed + * IFRAME-05: 1101 --> allowed but its not for us!!! + * + */ +int ath5k_hw_set_bssid_mask(struct ath5k_hw *ah, const u8 *mask) +{ + u32 low_id, high_id; + ATH5K_TRACE(ah->ah_sc); + + if (ah->ah_version == AR5K_AR5212) { + low_id = AR5K_LOW_ID(mask); + high_id = AR5K_HIGH_ID(mask); + + ath5k_hw_reg_write(ah, low_id, AR5K_BSS_IDM0); + ath5k_hw_reg_write(ah, high_id, AR5K_BSS_IDM1); + + return 0; + } + + return -EIO; +} + + +/************\ +* RX Control * +\************/ + +/** + * ath5k_hw_start_rx_pcu - Start RX engine + * + * @ah: The &struct ath5k_hw + * + * Starts RX engine on PCU so that hw can process RXed frames + * (ACK etc). + * + * NOTE: RX DMA should be already enabled using ath5k_hw_start_rx_dma + * TODO: Init ANI here + */ +void ath5k_hw_start_rx_pcu(struct ath5k_hw *ah) +{ + ATH5K_TRACE(ah->ah_sc); + AR5K_REG_DISABLE_BITS(ah, AR5K_DIAG_SW, AR5K_DIAG_SW_DIS_RX); +} + +/** + * at5k_hw_stop_rx_pcu - Stop RX engine + * + * @ah: The &struct ath5k_hw + * + * Stops RX engine on PCU + * + * TODO: Detach ANI here + */ +void ath5k_hw_stop_rx_pcu(struct ath5k_hw *ah) +{ + ATH5K_TRACE(ah->ah_sc); + AR5K_REG_ENABLE_BITS(ah, AR5K_DIAG_SW, AR5K_DIAG_SW_DIS_RX); +} + +/* + * Set multicast filter + */ +void ath5k_hw_set_mcast_filter(struct ath5k_hw *ah, u32 filter0, u32 filter1) +{ + ATH5K_TRACE(ah->ah_sc); + /* Set the multicat filter */ + ath5k_hw_reg_write(ah, filter0, AR5K_MCAST_FILTER0); + ath5k_hw_reg_write(ah, filter1, AR5K_MCAST_FILTER1); +} + +/* + * Set multicast filter by index + */ +int ath5k_hw_set_mcast_filter_idx(struct ath5k_hw *ah, u32 index) +{ + + ATH5K_TRACE(ah->ah_sc); + if (index >= 64) + return -EINVAL; + else if (index >= 32) + AR5K_REG_ENABLE_BITS(ah, AR5K_MCAST_FILTER1, + (1 << (index - 32))); + else + AR5K_REG_ENABLE_BITS(ah, AR5K_MCAST_FILTER0, (1 << index)); + + return 0; +} + +/* + * Clear Multicast filter by index + */ +int ath5k_hw_clear_mcast_filter_idx(struct ath5k_hw *ah, u32 index) +{ + + ATH5K_TRACE(ah->ah_sc); + if (index >= 64) + return -EINVAL; + else if (index >= 32) + AR5K_REG_DISABLE_BITS(ah, AR5K_MCAST_FILTER1, + (1 << (index - 32))); + else + AR5K_REG_DISABLE_BITS(ah, AR5K_MCAST_FILTER0, (1 << index)); + + return 0; +} + +/** + * ath5k_hw_get_rx_filter - Get current rx filter + * + * @ah: The &struct ath5k_hw + * + * Returns the RX filter by reading rx filter and + * phy error filter registers. RX filter is used + * to set the allowed frame types that PCU will accept + * and pass to the driver. For a list of frame types + * check out reg.h. + */ +u32 ath5k_hw_get_rx_filter(struct ath5k_hw *ah) +{ + u32 data, filter = 0; + + ATH5K_TRACE(ah->ah_sc); + filter = ath5k_hw_reg_read(ah, AR5K_RX_FILTER); + + /*Radar detection for 5212*/ + if (ah->ah_version == AR5K_AR5212) { + data = ath5k_hw_reg_read(ah, AR5K_PHY_ERR_FIL); + + if (data & AR5K_PHY_ERR_FIL_RADAR) + filter |= AR5K_RX_FILTER_RADARERR; + if (data & (AR5K_PHY_ERR_FIL_OFDM | AR5K_PHY_ERR_FIL_CCK)) + filter |= AR5K_RX_FILTER_PHYERR; + } + + return filter; +} + +/** + * ath5k_hw_set_rx_filter - Set rx filter + * + * @ah: The &struct ath5k_hw + * @filter: RX filter mask (see reg.h) + * + * Sets RX filter register and also handles PHY error filter + * register on 5212 and newer chips so that we have proper PHY + * error reporting. + */ +void ath5k_hw_set_rx_filter(struct ath5k_hw *ah, u32 filter) +{ + u32 data = 0; + + ATH5K_TRACE(ah->ah_sc); + + /* Set PHY error filter register on 5212*/ + if (ah->ah_version == AR5K_AR5212) { + if (filter & AR5K_RX_FILTER_RADARERR) + data |= AR5K_PHY_ERR_FIL_RADAR; + if (filter & AR5K_RX_FILTER_PHYERR) + data |= AR5K_PHY_ERR_FIL_OFDM | AR5K_PHY_ERR_FIL_CCK; + } + + /* + * The AR5210 uses promiscous mode to detect radar activity + */ + if (ah->ah_version == AR5K_AR5210 && + (filter & AR5K_RX_FILTER_RADARERR)) { + filter &= ~AR5K_RX_FILTER_RADARERR; + filter |= AR5K_RX_FILTER_PROM; + } + + /*Zero length DMA*/ + if (data) + AR5K_REG_ENABLE_BITS(ah, AR5K_RXCFG, AR5K_RXCFG_ZLFDMA); + else + AR5K_REG_DISABLE_BITS(ah, AR5K_RXCFG, AR5K_RXCFG_ZLFDMA); + + /*Write RX Filter register*/ + ath5k_hw_reg_write(ah, filter & 0xff, AR5K_RX_FILTER); + + /*Write PHY error filter register on 5212*/ + if (ah->ah_version == AR5K_AR5212) + ath5k_hw_reg_write(ah, data, AR5K_PHY_ERR_FIL); + +} + + +/****************\ +* Beacon control * +\****************/ + +/** + * ath5k_hw_get_tsf32 - Get a 32bit TSF + * + * @ah: The &struct ath5k_hw + * + * Returns lower 32 bits of current TSF + */ +u32 ath5k_hw_get_tsf32(struct ath5k_hw *ah) +{ + ATH5K_TRACE(ah->ah_sc); + return ath5k_hw_reg_read(ah, AR5K_TSF_L32); +} + +/** + * ath5k_hw_get_tsf64 - Get the full 64bit TSF + * + * @ah: The &struct ath5k_hw + * + * Returns the current TSF + */ +u64 ath5k_hw_get_tsf64(struct ath5k_hw *ah) +{ + u64 tsf = ath5k_hw_reg_read(ah, AR5K_TSF_U32); + ATH5K_TRACE(ah->ah_sc); + + return ath5k_hw_reg_read(ah, AR5K_TSF_L32) | (tsf << 32); +} + +/** + * ath5k_hw_reset_tsf - Force a TSF reset + * + * @ah: The &struct ath5k_hw + * + * Forces a TSF reset on PCU + */ +void ath5k_hw_reset_tsf(struct ath5k_hw *ah) +{ + ATH5K_TRACE(ah->ah_sc); + AR5K_REG_ENABLE_BITS(ah, AR5K_BEACON, AR5K_BEACON_RESET_TSF); +} + +/* + * Initialize beacon timers + */ +void ath5k_hw_init_beacon(struct ath5k_hw *ah, u32 next_beacon, u32 interval) +{ + u32 timer1, timer2, timer3; + + ATH5K_TRACE(ah->ah_sc); + /* + * Set the additional timers by mode + */ + switch (ah->ah_op_mode) { + case IEEE80211_IF_TYPE_STA: + if (ah->ah_version == AR5K_AR5210) { + timer1 = 0xffffffff; + timer2 = 0xffffffff; + } else { + timer1 = 0x0000ffff; + timer2 = 0x0007ffff; + } + break; + + default: + timer1 = (next_beacon - AR5K_TUNE_DMA_BEACON_RESP) << 3; + timer2 = (next_beacon - AR5K_TUNE_SW_BEACON_RESP) << 3; + } + + timer3 = next_beacon + (ah->ah_atim_window ? ah->ah_atim_window : 1); + + /* + * Set the beacon register and enable all timers. + * (next beacon, DMA beacon, software beacon, ATIM window time) + */ + ath5k_hw_reg_write(ah, next_beacon, AR5K_TIMER0); + ath5k_hw_reg_write(ah, timer1, AR5K_TIMER1); + ath5k_hw_reg_write(ah, timer2, AR5K_TIMER2); + ath5k_hw_reg_write(ah, timer3, AR5K_TIMER3); + + ath5k_hw_reg_write(ah, interval & (AR5K_BEACON_PERIOD | + AR5K_BEACON_RESET_TSF | AR5K_BEACON_ENABLE), + AR5K_BEACON); +} + +#if 0 +/* + * Set beacon timers + */ +int ath5k_hw_set_beacon_timers(struct ath5k_hw *ah, + const struct ath5k_beacon_state *state) +{ + u32 cfp_period, next_cfp, dtim, interval, next_beacon; + + /* + * TODO: should be changed through *state + * review struct ath5k_beacon_state struct + * + * XXX: These are used for cfp period bellow, are they + * ok ? Is it O.K. for tsf here to be 0 or should we use + * get_tsf ? + */ + u32 dtim_count = 0; /* XXX */ + u32 cfp_count = 0; /* XXX */ + u32 tsf = 0; /* XXX */ + + ATH5K_TRACE(ah->ah_sc); + /* Return on an invalid beacon state */ + if (state->bs_interval < 1) + return -EINVAL; + + interval = state->bs_interval; + dtim = state->bs_dtim_period; + + /* + * PCF support? + */ + if (state->bs_cfp_period > 0) { + /* + * Enable PCF mode and set the CFP + * (Contention Free Period) and timer registers + */ + cfp_period = state->bs_cfp_period * state->bs_dtim_period * + state->bs_interval; + next_cfp = (cfp_count * state->bs_dtim_period + dtim_count) * + state->bs_interval; + + AR5K_REG_ENABLE_BITS(ah, AR5K_STA_ID1, + AR5K_STA_ID1_DEFAULT_ANTENNA | + AR5K_STA_ID1_PCF); + ath5k_hw_reg_write(ah, cfp_period, AR5K_CFP_PERIOD); + ath5k_hw_reg_write(ah, state->bs_cfp_max_duration, + AR5K_CFP_DUR); + ath5k_hw_reg_write(ah, (tsf + (next_cfp == 0 ? cfp_period : + next_cfp)) << 3, AR5K_TIMER2); + } else { + /* Disable PCF mode */ + AR5K_REG_DISABLE_BITS(ah, AR5K_STA_ID1, + AR5K_STA_ID1_DEFAULT_ANTENNA | + AR5K_STA_ID1_PCF); + } + + /* + * Enable the beacon timer register + */ + ath5k_hw_reg_write(ah, state->bs_next_beacon, AR5K_TIMER0); + + /* + * Start the beacon timers + */ + ath5k_hw_reg_write(ah, (ath5k_hw_reg_read(ah, AR5K_BEACON) & + ~(AR5K_BEACON_PERIOD | AR5K_BEACON_TIM)) | + AR5K_REG_SM(state->bs_tim_offset ? state->bs_tim_offset + 4 : 0, + AR5K_BEACON_TIM) | AR5K_REG_SM(state->bs_interval, + AR5K_BEACON_PERIOD), AR5K_BEACON); + + /* + * Write new beacon miss threshold, if it appears to be valid + * XXX: Figure out right values for min <= bs_bmiss_threshold <= max + * and return if its not in range. We can test this by reading value and + * setting value to a largest value and seeing which values register. + */ + + AR5K_REG_WRITE_BITS(ah, AR5K_RSSI_THR, AR5K_RSSI_THR_BMISS, + state->bs_bmiss_threshold); + + /* + * Set sleep control register + * XXX: Didn't find this in 5210 code but since this register + * exists also in ar5k's 5210 headers i leave it as common code. + */ + AR5K_REG_WRITE_BITS(ah, AR5K_SLEEP_CTL, AR5K_SLEEP_CTL_SLDUR, + (state->bs_sleep_duration - 3) << 3); + + /* + * Set enhanced sleep registers on 5212 + */ + if (ah->ah_version == AR5K_AR5212) { + if (state->bs_sleep_duration > state->bs_interval && + roundup(state->bs_sleep_duration, interval) == + state->bs_sleep_duration) + interval = state->bs_sleep_duration; + + if (state->bs_sleep_duration > dtim && (dtim == 0 || + roundup(state->bs_sleep_duration, dtim) == + state->bs_sleep_duration)) + dtim = state->bs_sleep_duration; + + if (interval > dtim) + return -EINVAL; + + next_beacon = interval == dtim ? state->bs_next_dtim : + state->bs_next_beacon; + + ath5k_hw_reg_write(ah, + AR5K_REG_SM((state->bs_next_dtim - 3) << 3, + AR5K_SLEEP0_NEXT_DTIM) | + AR5K_REG_SM(10, AR5K_SLEEP0_CABTO) | + AR5K_SLEEP0_ENH_SLEEP_EN | + AR5K_SLEEP0_ASSUME_DTIM, AR5K_SLEEP0); + + ath5k_hw_reg_write(ah, AR5K_REG_SM((next_beacon - 3) << 3, + AR5K_SLEEP1_NEXT_TIM) | + AR5K_REG_SM(10, AR5K_SLEEP1_BEACON_TO), AR5K_SLEEP1); + + ath5k_hw_reg_write(ah, + AR5K_REG_SM(interval, AR5K_SLEEP2_TIM_PER) | + AR5K_REG_SM(dtim, AR5K_SLEEP2_DTIM_PER), AR5K_SLEEP2); + } + + return 0; +} + +/* + * Reset beacon timers + */ +void ath5k_hw_reset_beacon(struct ath5k_hw *ah) +{ + ATH5K_TRACE(ah->ah_sc); + /* + * Disable beacon timer + */ + ath5k_hw_reg_write(ah, 0, AR5K_TIMER0); + + /* + * Disable some beacon register values + */ + AR5K_REG_DISABLE_BITS(ah, AR5K_STA_ID1, + AR5K_STA_ID1_DEFAULT_ANTENNA | AR5K_STA_ID1_PCF); + ath5k_hw_reg_write(ah, AR5K_BEACON_PERIOD, AR5K_BEACON); +} + +/* + * Wait for beacon queue to finish + */ +int ath5k_hw_beaconq_finish(struct ath5k_hw *ah, unsigned long phys_addr) +{ + unsigned int i; + int ret; + + ATH5K_TRACE(ah->ah_sc); + + /* 5210 doesn't have QCU*/ + if (ah->ah_version == AR5K_AR5210) { + /* + * Wait for beaconn queue to finish by checking + * Control Register and Beacon Status Register. + */ + for (i = AR5K_TUNE_BEACON_INTERVAL / 2; i > 0; i--) { + if (!(ath5k_hw_reg_read(ah, AR5K_BSR) & AR5K_BSR_TXQ1F) + || + !(ath5k_hw_reg_read(ah, AR5K_CR) & AR5K_BSR_TXQ1F)) + break; + udelay(10); + } + + /* Timeout... */ + if (i <= 0) { + /* + * Re-schedule the beacon queue + */ + ath5k_hw_reg_write(ah, phys_addr, AR5K_NOQCU_TXDP1); + ath5k_hw_reg_write(ah, AR5K_BCR_TQ1V | AR5K_BCR_BDMAE, + AR5K_BCR); + + return -EIO; + } + ret = 0; + } else { + /*5211/5212*/ + ret = ath5k_hw_register_timeout(ah, + AR5K_QUEUE_STATUS(AR5K_TX_QUEUE_ID_BEACON), + AR5K_QCU_STS_FRMPENDCNT, 0, false); + + if (AR5K_REG_READ_Q(ah, AR5K_QCU_TXE, AR5K_TX_QUEUE_ID_BEACON)) + return -EIO; + } + + return ret; +} +#endif + + +/*********************\ +* Key table functions * +\*********************/ + +/* + * Reset a key entry on the table + */ +int ath5k_hw_reset_key(struct ath5k_hw *ah, u16 entry) +{ + unsigned int i; + + ATH5K_TRACE(ah->ah_sc); + AR5K_ASSERT_ENTRY(entry, AR5K_KEYTABLE_SIZE); + + for (i = 0; i < AR5K_KEYCACHE_SIZE; i++) + ath5k_hw_reg_write(ah, 0, AR5K_KEYTABLE_OFF(entry, i)); + + /* + * Set NULL encryption on AR5212+ + * + * Note: AR5K_KEYTABLE_TYPE -> AR5K_KEYTABLE_OFF(entry, 5) + * AR5K_KEYTABLE_TYPE_NULL -> 0x00000007 + * + * Note2: Windows driver (ndiswrapper) sets this to + * 0x00000714 instead of 0x00000007 + */ + if (ah->ah_version > AR5K_AR5211) + ath5k_hw_reg_write(ah, AR5K_KEYTABLE_TYPE_NULL, + AR5K_KEYTABLE_TYPE(entry)); + + return 0; +} + +/* + * Check if a table entry is valid + */ +int ath5k_hw_is_key_valid(struct ath5k_hw *ah, u16 entry) +{ + ATH5K_TRACE(ah->ah_sc); + AR5K_ASSERT_ENTRY(entry, AR5K_KEYTABLE_SIZE); + + /* Check the validation flag at the end of the entry */ + return ath5k_hw_reg_read(ah, AR5K_KEYTABLE_MAC1(entry)) & + AR5K_KEYTABLE_VALID; +} + +/* + * Set a key entry on the table + */ +int ath5k_hw_set_key(struct ath5k_hw *ah, u16 entry, + const struct ieee80211_key_conf *key, const u8 *mac) +{ + unsigned int i; + __le32 key_v[5] = {}; + u32 keytype; + + ATH5K_TRACE(ah->ah_sc); + + /* key->keylen comes in from mac80211 in bytes */ + + if (key->keylen > AR5K_KEYTABLE_SIZE / 8) + return -EOPNOTSUPP; + + switch (key->keylen) { + /* WEP 40-bit = 40-bit entered key + 24 bit IV = 64-bit */ + case 40 / 8: + memcpy(&key_v[0], key->key, 5); + keytype = AR5K_KEYTABLE_TYPE_40; + break; + + /* WEP 104-bit = 104-bit entered key + 24-bit IV = 128-bit */ + case 104 / 8: + memcpy(&key_v[0], &key->key[0], 6); + memcpy(&key_v[2], &key->key[6], 6); + memcpy(&key_v[4], &key->key[12], 1); + keytype = AR5K_KEYTABLE_TYPE_104; + break; + /* WEP 128-bit = 128-bit entered key + 24 bit IV = 152-bit */ + case 128 / 8: + memcpy(&key_v[0], &key->key[0], 6); + memcpy(&key_v[2], &key->key[6], 6); + memcpy(&key_v[4], &key->key[12], 4); + keytype = AR5K_KEYTABLE_TYPE_128; + break; + + default: + return -EINVAL; /* shouldn't happen */ + } + + for (i = 0; i < ARRAY_SIZE(key_v); i++) + ath5k_hw_reg_write(ah, le32_to_cpu(key_v[i]), + AR5K_KEYTABLE_OFF(entry, i)); + + ath5k_hw_reg_write(ah, keytype, AR5K_KEYTABLE_TYPE(entry)); + + return ath5k_hw_set_key_lladdr(ah, entry, mac); +} + +int ath5k_hw_set_key_lladdr(struct ath5k_hw *ah, u16 entry, const u8 *mac) +{ + u32 low_id, high_id; + + ATH5K_TRACE(ah->ah_sc); + /* Invalid entry (key table overflow) */ + AR5K_ASSERT_ENTRY(entry, AR5K_KEYTABLE_SIZE); + + /* MAC may be NULL if it's a broadcast key. In this case no need to + * to compute AR5K_LOW_ID and AR5K_HIGH_ID as we already know it. */ + if (unlikely(mac == NULL)) { + low_id = 0xffffffff; + high_id = 0xffff | AR5K_KEYTABLE_VALID; + } else { + low_id = AR5K_LOW_ID(mac); + high_id = AR5K_HIGH_ID(mac) | AR5K_KEYTABLE_VALID; + } + + ath5k_hw_reg_write(ah, low_id, AR5K_KEYTABLE_MAC0(entry)); + ath5k_hw_reg_write(ah, high_id, AR5K_KEYTABLE_MAC1(entry)); + + return 0; +} + diff --git a/drivers/net/wireless/ath5k/phy.c b/drivers/net/wireless/ath5k/phy.c index fa0d47faf57..1ea8ed962d2 100644 --- a/drivers/net/wireless/ath5k/phy.c +++ b/drivers/net/wireless/ath5k/phy.c @@ -1,9 +1,9 @@ /* * PHY functions * - * Copyright (c) 2004, 2005, 2006, 2007 Reyk Floeter <reyk@openbsd.org> - * Copyright (c) 2006, 2007 Nick Kossifidis <mickflemm@gmail.com> - * Copyright (c) 2007 Jiri Slaby <jirislaby@gmail.com> + * Copyright (c) 2004-2007 Reyk Floeter <reyk@openbsd.org> + * Copyright (c) 2006-2007 Nick Kossifidis <mickflemm@gmail.com> + * Copyright (c) 2007-2008 Jiri Slaby <jirislaby@gmail.com> * * Permission to use, copy, modify, and distribute this software for any * purpose with or without fee is hereby granted, provided that the above @@ -19,6 +19,8 @@ * */ +#define _ATH5K_PHY + #include <linux/delay.h> #include "ath5k.h" @@ -2501,3 +2503,5 @@ int ath5k_hw_set_txpower_limit(struct ath5k_hw *ah, unsigned int power) return ath5k_hw_txpower(ah, channel, power); } + +#undef _ATH5K_PHY diff --git a/drivers/net/wireless/ath5k/qcu.c b/drivers/net/wireless/ath5k/qcu.c new file mode 100644 index 00000000000..2e20f7816ca --- /dev/null +++ b/drivers/net/wireless/ath5k/qcu.c @@ -0,0 +1,488 @@ +/* + * Copyright (c) 2004-2008 Reyk Floeter <reyk@openbsd.org> + * Copyright (c) 2006-2008 Nick Kossifidis <mickflemm@gmail.com> + * + * Permission to use, copy, modify, and distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * + */ + +/********************************************\ +Queue Control Unit, DFS Control Unit Functions +\********************************************/ + +#include "ath5k.h" +#include "reg.h" +#include "debug.h" +#include "base.h" + +/* + * Get properties for a transmit queue + */ +int ath5k_hw_get_tx_queueprops(struct ath5k_hw *ah, int queue, + struct ath5k_txq_info *queue_info) +{ + ATH5K_TRACE(ah->ah_sc); + memcpy(queue_info, &ah->ah_txq[queue], sizeof(struct ath5k_txq_info)); + return 0; +} + +/* + * Set properties for a transmit queue + */ +int ath5k_hw_set_tx_queueprops(struct ath5k_hw *ah, int queue, + const struct ath5k_txq_info *queue_info) +{ + ATH5K_TRACE(ah->ah_sc); + AR5K_ASSERT_ENTRY(queue, ah->ah_capabilities.cap_queues.q_tx_num); + + if (ah->ah_txq[queue].tqi_type == AR5K_TX_QUEUE_INACTIVE) + return -EIO; + + memcpy(&ah->ah_txq[queue], queue_info, sizeof(struct ath5k_txq_info)); + + /*XXX: Is this supported on 5210 ?*/ + if ((queue_info->tqi_type == AR5K_TX_QUEUE_DATA && + ((queue_info->tqi_subtype == AR5K_WME_AC_VI) || + (queue_info->tqi_subtype == AR5K_WME_AC_VO))) || + queue_info->tqi_type == AR5K_TX_QUEUE_UAPSD) + ah->ah_txq[queue].tqi_flags |= AR5K_TXQ_FLAG_POST_FR_BKOFF_DIS; + + return 0; +} + +/* + * Initialize a transmit queue + */ +int ath5k_hw_setup_tx_queue(struct ath5k_hw *ah, enum ath5k_tx_queue queue_type, + struct ath5k_txq_info *queue_info) +{ + unsigned int queue; + int ret; + + ATH5K_TRACE(ah->ah_sc); + + /* + * Get queue by type + */ + /*5210 only has 2 queues*/ + if (ah->ah_version == AR5K_AR5210) { + switch (queue_type) { + case AR5K_TX_QUEUE_DATA: + queue = AR5K_TX_QUEUE_ID_NOQCU_DATA; + break; + case AR5K_TX_QUEUE_BEACON: + case AR5K_TX_QUEUE_CAB: + queue = AR5K_TX_QUEUE_ID_NOQCU_BEACON; + break; + default: + return -EINVAL; + } + } else { + switch (queue_type) { + case AR5K_TX_QUEUE_DATA: + for (queue = AR5K_TX_QUEUE_ID_DATA_MIN; + ah->ah_txq[queue].tqi_type != + AR5K_TX_QUEUE_INACTIVE; queue++) { + + if (queue > AR5K_TX_QUEUE_ID_DATA_MAX) + return -EINVAL; + } + break; + case AR5K_TX_QUEUE_UAPSD: + queue = AR5K_TX_QUEUE_ID_UAPSD; + break; + case AR5K_TX_QUEUE_BEACON: + queue = AR5K_TX_QUEUE_ID_BEACON; + break; + case AR5K_TX_QUEUE_CAB: + queue = AR5K_TX_QUEUE_ID_CAB; + break; + case AR5K_TX_QUEUE_XR_DATA: + if (ah->ah_version != AR5K_AR5212) + ATH5K_ERR(ah->ah_sc, + "XR data queues only supported in" + " 5212!\n"); + queue = AR5K_TX_QUEUE_ID_XR_DATA; + break; + default: + return -EINVAL; + } + } + + /* + * Setup internal queue structure + */ + memset(&ah->ah_txq[queue], 0, sizeof(struct ath5k_txq_info)); + ah->ah_txq[queue].tqi_type = queue_type; + + if (queue_info != NULL) { + queue_info->tqi_type = queue_type; + ret = ath5k_hw_set_tx_queueprops(ah, queue, queue_info); + if (ret) + return ret; + } + + /* + * We use ah_txq_status to hold a temp value for + * the Secondary interrupt mask registers on 5211+ + * check out ath5k_hw_reset_tx_queue + */ + AR5K_Q_ENABLE_BITS(ah->ah_txq_status, queue); + + return queue; +} + +/* + * Get number of pending frames + * for a specific queue [5211+] + */ +u32 ath5k_hw_num_tx_pending(struct ath5k_hw *ah, unsigned int queue) +{ + ATH5K_TRACE(ah->ah_sc); + AR5K_ASSERT_ENTRY(queue, ah->ah_capabilities.cap_queues.q_tx_num); + + /* Return if queue is declared inactive */ + if (ah->ah_txq[queue].tqi_type == AR5K_TX_QUEUE_INACTIVE) + return false; + + /* XXX: How about AR5K_CFG_TXCNT ? */ + if (ah->ah_version == AR5K_AR5210) + return false; + + return AR5K_QUEUE_STATUS(queue) & AR5K_QCU_STS_FRMPENDCNT; +} + +/* + * Set a transmit queue inactive + */ +void ath5k_hw_release_tx_queue(struct ath5k_hw *ah, unsigned int queue) +{ + ATH5K_TRACE(ah->ah_sc); + if (WARN_ON(queue >= ah->ah_capabilities.cap_queues.q_tx_num)) + return; + + /* This queue will be skipped in further operations */ + ah->ah_txq[queue].tqi_type = AR5K_TX_QUEUE_INACTIVE; + /*For SIMR setup*/ + AR5K_Q_DISABLE_BITS(ah->ah_txq_status, queue); +} + +/* + * Set DFS properties for a transmit queue on DCU + */ +int ath5k_hw_reset_tx_queue(struct ath5k_hw *ah, unsigned int queue) +{ + u32 cw_min, cw_max, retry_lg, retry_sh; + struct ath5k_txq_info *tq = &ah->ah_txq[queue]; + + ATH5K_TRACE(ah->ah_sc); + AR5K_ASSERT_ENTRY(queue, ah->ah_capabilities.cap_queues.q_tx_num); + + tq = &ah->ah_txq[queue]; + + if (tq->tqi_type == AR5K_TX_QUEUE_INACTIVE) + return 0; + + if (ah->ah_version == AR5K_AR5210) { + /* Only handle data queues, others will be ignored */ + if (tq->tqi_type != AR5K_TX_QUEUE_DATA) + return 0; + + /* Set Slot time */ + ath5k_hw_reg_write(ah, ah->ah_turbo ? + AR5K_INIT_SLOT_TIME_TURBO : AR5K_INIT_SLOT_TIME, + AR5K_SLOT_TIME); + /* Set ACK_CTS timeout */ + ath5k_hw_reg_write(ah, ah->ah_turbo ? + AR5K_INIT_ACK_CTS_TIMEOUT_TURBO : + AR5K_INIT_ACK_CTS_TIMEOUT, AR5K_SLOT_TIME); + /* Set Transmit Latency */ + ath5k_hw_reg_write(ah, ah->ah_turbo ? + AR5K_INIT_TRANSMIT_LATENCY_TURBO : + AR5K_INIT_TRANSMIT_LATENCY, AR5K_USEC_5210); + + /* Set IFS0 */ + if (ah->ah_turbo) { + ath5k_hw_reg_write(ah, ((AR5K_INIT_SIFS_TURBO + + (ah->ah_aifs + tq->tqi_aifs) * + AR5K_INIT_SLOT_TIME_TURBO) << + AR5K_IFS0_DIFS_S) | AR5K_INIT_SIFS_TURBO, + AR5K_IFS0); + } else { + ath5k_hw_reg_write(ah, ((AR5K_INIT_SIFS + + (ah->ah_aifs + tq->tqi_aifs) * + AR5K_INIT_SLOT_TIME) << AR5K_IFS0_DIFS_S) | + AR5K_INIT_SIFS, AR5K_IFS0); + } + + /* Set IFS1 */ + ath5k_hw_reg_write(ah, ah->ah_turbo ? + AR5K_INIT_PROTO_TIME_CNTRL_TURBO : + AR5K_INIT_PROTO_TIME_CNTRL, AR5K_IFS1); + /* Set AR5K_PHY_SETTLING */ + ath5k_hw_reg_write(ah, ah->ah_turbo ? + (ath5k_hw_reg_read(ah, AR5K_PHY_SETTLING) & ~0x7F) + | 0x38 : + (ath5k_hw_reg_read(ah, AR5K_PHY_SETTLING) & ~0x7F) + | 0x1C, + AR5K_PHY_SETTLING); + /* Set Frame Control Register */ + ath5k_hw_reg_write(ah, ah->ah_turbo ? + (AR5K_PHY_FRAME_CTL_INI | AR5K_PHY_TURBO_MODE | + AR5K_PHY_TURBO_SHORT | 0x2020) : + (AR5K_PHY_FRAME_CTL_INI | 0x1020), + AR5K_PHY_FRAME_CTL_5210); + } + + /* + * Calculate cwmin/max by channel mode + */ + cw_min = ah->ah_cw_min = AR5K_TUNE_CWMIN; + cw_max = ah->ah_cw_max = AR5K_TUNE_CWMAX; + ah->ah_aifs = AR5K_TUNE_AIFS; + /*XR is only supported on 5212*/ + if (IS_CHAN_XR(ah->ah_current_channel) && + ah->ah_version == AR5K_AR5212) { + cw_min = ah->ah_cw_min = AR5K_TUNE_CWMIN_XR; + cw_max = ah->ah_cw_max = AR5K_TUNE_CWMAX_XR; + ah->ah_aifs = AR5K_TUNE_AIFS_XR; + /*B mode is not supported on 5210*/ + } else if (IS_CHAN_B(ah->ah_current_channel) && + ah->ah_version != AR5K_AR5210) { + cw_min = ah->ah_cw_min = AR5K_TUNE_CWMIN_11B; + cw_max = ah->ah_cw_max = AR5K_TUNE_CWMAX_11B; + ah->ah_aifs = AR5K_TUNE_AIFS_11B; + } + + cw_min = 1; + while (cw_min < ah->ah_cw_min) + cw_min = (cw_min << 1) | 1; + + cw_min = tq->tqi_cw_min < 0 ? (cw_min >> (-tq->tqi_cw_min)) : + ((cw_min << tq->tqi_cw_min) + (1 << tq->tqi_cw_min) - 1); + cw_max = tq->tqi_cw_max < 0 ? (cw_max >> (-tq->tqi_cw_max)) : + ((cw_max << tq->tqi_cw_max) + (1 << tq->tqi_cw_max) - 1); + + /* + * Calculate and set retry limits + */ + if (ah->ah_software_retry) { + /* XXX Need to test this */ + retry_lg = ah->ah_limit_tx_retries; + retry_sh = retry_lg = retry_lg > AR5K_DCU_RETRY_LMT_SH_RETRY ? + AR5K_DCU_RETRY_LMT_SH_RETRY : retry_lg; + } else { + retry_lg = AR5K_INIT_LG_RETRY; + retry_sh = AR5K_INIT_SH_RETRY; + } + + /*No QCU/DCU [5210]*/ + if (ah->ah_version == AR5K_AR5210) { + ath5k_hw_reg_write(ah, + (cw_min << AR5K_NODCU_RETRY_LMT_CW_MIN_S) + | AR5K_REG_SM(AR5K_INIT_SLG_RETRY, + AR5K_NODCU_RETRY_LMT_SLG_RETRY) + | AR5K_REG_SM(AR5K_INIT_SSH_RETRY, + AR5K_NODCU_RETRY_LMT_SSH_RETRY) + | AR5K_REG_SM(retry_lg, AR5K_NODCU_RETRY_LMT_LG_RETRY) + | AR5K_REG_SM(retry_sh, AR5K_NODCU_RETRY_LMT_SH_RETRY), + AR5K_NODCU_RETRY_LMT); + } else { + /*QCU/DCU [5211+]*/ + ath5k_hw_reg_write(ah, + AR5K_REG_SM(AR5K_INIT_SLG_RETRY, + AR5K_DCU_RETRY_LMT_SLG_RETRY) | + AR5K_REG_SM(AR5K_INIT_SSH_RETRY, + AR5K_DCU_RETRY_LMT_SSH_RETRY) | + AR5K_REG_SM(retry_lg, AR5K_DCU_RETRY_LMT_LG_RETRY) | + AR5K_REG_SM(retry_sh, AR5K_DCU_RETRY_LMT_SH_RETRY), + AR5K_QUEUE_DFS_RETRY_LIMIT(queue)); + + /*===Rest is also for QCU/DCU only [5211+]===*/ + + /* + * Set initial content window (cw_min/cw_max) + * and arbitrated interframe space (aifs)... + */ + ath5k_hw_reg_write(ah, + AR5K_REG_SM(cw_min, AR5K_DCU_LCL_IFS_CW_MIN) | + AR5K_REG_SM(cw_max, AR5K_DCU_LCL_IFS_CW_MAX) | + AR5K_REG_SM(ah->ah_aifs + tq->tqi_aifs, + AR5K_DCU_LCL_IFS_AIFS), + AR5K_QUEUE_DFS_LOCAL_IFS(queue)); + + /* + * Set misc registers + */ + ath5k_hw_reg_write(ah, AR5K_QCU_MISC_DCU_EARLY, + AR5K_QUEUE_MISC(queue)); + + if (tq->tqi_cbr_period) { + ath5k_hw_reg_write(ah, AR5K_REG_SM(tq->tqi_cbr_period, + AR5K_QCU_CBRCFG_INTVAL) | + AR5K_REG_SM(tq->tqi_cbr_overflow_limit, + AR5K_QCU_CBRCFG_ORN_THRES), + AR5K_QUEUE_CBRCFG(queue)); + AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_MISC(queue), + AR5K_QCU_MISC_FRSHED_CBR); + if (tq->tqi_cbr_overflow_limit) + AR5K_REG_ENABLE_BITS(ah, + AR5K_QUEUE_MISC(queue), + AR5K_QCU_MISC_CBR_THRES_ENABLE); + } + + if (tq->tqi_ready_time) + ath5k_hw_reg_write(ah, AR5K_REG_SM(tq->tqi_ready_time, + AR5K_QCU_RDYTIMECFG_INTVAL) | + AR5K_QCU_RDYTIMECFG_ENABLE, + AR5K_QUEUE_RDYTIMECFG(queue)); + + if (tq->tqi_burst_time) { + ath5k_hw_reg_write(ah, AR5K_REG_SM(tq->tqi_burst_time, + AR5K_DCU_CHAN_TIME_DUR) | + AR5K_DCU_CHAN_TIME_ENABLE, + AR5K_QUEUE_DFS_CHANNEL_TIME(queue)); + + if (tq->tqi_flags + & AR5K_TXQ_FLAG_RDYTIME_EXP_POLICY_ENABLE) + AR5K_REG_ENABLE_BITS(ah, + AR5K_QUEUE_MISC(queue), + AR5K_QCU_MISC_RDY_VEOL_POLICY); + } + + if (tq->tqi_flags & AR5K_TXQ_FLAG_BACKOFF_DISABLE) + ath5k_hw_reg_write(ah, AR5K_DCU_MISC_POST_FR_BKOFF_DIS, + AR5K_QUEUE_DFS_MISC(queue)); + + if (tq->tqi_flags & AR5K_TXQ_FLAG_FRAG_BURST_BACKOFF_ENABLE) + ath5k_hw_reg_write(ah, AR5K_DCU_MISC_BACKOFF_FRAG, + AR5K_QUEUE_DFS_MISC(queue)); + + /* + * Set registers by queue type + */ + switch (tq->tqi_type) { + case AR5K_TX_QUEUE_BEACON: + AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_MISC(queue), + AR5K_QCU_MISC_FRSHED_DBA_GT | + AR5K_QCU_MISC_CBREXP_BCN | + AR5K_QCU_MISC_BCN_ENABLE); + + AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_DFS_MISC(queue), + (AR5K_DCU_MISC_ARBLOCK_CTL_GLOBAL << + AR5K_DCU_MISC_ARBLOCK_CTL_S) | + AR5K_DCU_MISC_POST_FR_BKOFF_DIS | + AR5K_DCU_MISC_BCN_ENABLE); + + ath5k_hw_reg_write(ah, ((AR5K_TUNE_BEACON_INTERVAL - + (AR5K_TUNE_SW_BEACON_RESP - + AR5K_TUNE_DMA_BEACON_RESP) - + AR5K_TUNE_ADDITIONAL_SWBA_BACKOFF) * 1024) | + AR5K_QCU_RDYTIMECFG_ENABLE, + AR5K_QUEUE_RDYTIMECFG(queue)); + break; + + case AR5K_TX_QUEUE_CAB: + AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_MISC(queue), + AR5K_QCU_MISC_FRSHED_DBA_GT | + AR5K_QCU_MISC_CBREXP | + AR5K_QCU_MISC_CBREXP_BCN); + + AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_DFS_MISC(queue), + (AR5K_DCU_MISC_ARBLOCK_CTL_GLOBAL << + AR5K_DCU_MISC_ARBLOCK_CTL_S)); + break; + + case AR5K_TX_QUEUE_UAPSD: + AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_MISC(queue), + AR5K_QCU_MISC_CBREXP); + break; + + case AR5K_TX_QUEUE_DATA: + default: + break; + } + + /* + * Enable interrupts for this tx queue + * in the secondary interrupt mask registers + */ + if (tq->tqi_flags & AR5K_TXQ_FLAG_TXOKINT_ENABLE) + AR5K_Q_ENABLE_BITS(ah->ah_txq_imr_txok, queue); + + if (tq->tqi_flags & AR5K_TXQ_FLAG_TXERRINT_ENABLE) + AR5K_Q_ENABLE_BITS(ah->ah_txq_imr_txerr, queue); + + if (tq->tqi_flags & AR5K_TXQ_FLAG_TXURNINT_ENABLE) + AR5K_Q_ENABLE_BITS(ah->ah_txq_imr_txurn, queue); + + if (tq->tqi_flags & AR5K_TXQ_FLAG_TXDESCINT_ENABLE) + AR5K_Q_ENABLE_BITS(ah->ah_txq_imr_txdesc, queue); + + if (tq->tqi_flags & AR5K_TXQ_FLAG_TXEOLINT_ENABLE) + AR5K_Q_ENABLE_BITS(ah->ah_txq_imr_txeol, queue); + + + /* Update secondary interrupt mask registers */ + ah->ah_txq_imr_txok &= ah->ah_txq_status; + ah->ah_txq_imr_txerr &= ah->ah_txq_status; + ah->ah_txq_imr_txurn &= ah->ah_txq_status; + ah->ah_txq_imr_txdesc &= ah->ah_txq_status; + ah->ah_txq_imr_txeol &= ah->ah_txq_status; + + ath5k_hw_reg_write(ah, AR5K_REG_SM(ah->ah_txq_imr_txok, + AR5K_SIMR0_QCU_TXOK) | + AR5K_REG_SM(ah->ah_txq_imr_txdesc, + AR5K_SIMR0_QCU_TXDESC), AR5K_SIMR0); + ath5k_hw_reg_write(ah, AR5K_REG_SM(ah->ah_txq_imr_txerr, + AR5K_SIMR1_QCU_TXERR) | + AR5K_REG_SM(ah->ah_txq_imr_txeol, + AR5K_SIMR1_QCU_TXEOL), AR5K_SIMR1); + ath5k_hw_reg_write(ah, AR5K_REG_SM(ah->ah_txq_imr_txurn, + AR5K_SIMR2_QCU_TXURN), AR5K_SIMR2); + } + + return 0; +} + +/* + * Get slot time from DCU + */ +unsigned int ath5k_hw_get_slot_time(struct ath5k_hw *ah) +{ + ATH5K_TRACE(ah->ah_sc); + if (ah->ah_version == AR5K_AR5210) + return ath5k_hw_clocktoh(ath5k_hw_reg_read(ah, + AR5K_SLOT_TIME) & 0xffff, ah->ah_turbo); + else + return ath5k_hw_reg_read(ah, AR5K_DCU_GBL_IFS_SLOT) & 0xffff; +} + +/* + * Set slot time on DCU + */ +int ath5k_hw_set_slot_time(struct ath5k_hw *ah, unsigned int slot_time) +{ + ATH5K_TRACE(ah->ah_sc); + if (slot_time < AR5K_SLOT_TIME_9 || slot_time > AR5K_SLOT_TIME_MAX) + return -EINVAL; + + if (ah->ah_version == AR5K_AR5210) + ath5k_hw_reg_write(ah, ath5k_hw_htoclock(slot_time, + ah->ah_turbo), AR5K_SLOT_TIME); + else + ath5k_hw_reg_write(ah, slot_time, AR5K_DCU_GBL_IFS_SLOT); + + return 0; +} + diff --git a/drivers/net/wireless/ath5k/reg.h b/drivers/net/wireless/ath5k/reg.h index 7562bf173d3..a9883236444 100644 --- a/drivers/net/wireless/ath5k/reg.h +++ b/drivers/net/wireless/ath5k/reg.h @@ -1,7 +1,7 @@ /* - * Copyright (c) 2007 Nick Kossifidis <mickflemm@gmail.com> - * Copyright (c) 2004, 2005, 2006, 2007 Reyk Floeter <reyk@openbsd.org> - * Copyright (c) 2007 Michael Taylor <mike.taylor@apprion.com> + * Copyright (c) 2006-2008 Nick Kossifidis <mickflemm@gmail.com> + * Copyright (c) 2004-2008 Reyk Floeter <reyk@openbsd.org> + * Copyright (c) 2007-2008 Michael Taylor <mike.taylor@apprion.com> * * Permission to use, copy, modify, and distribute this software for any * purpose with or without fee is hereby granted, provided that the above @@ -977,98 +977,6 @@ #define AR5K_EEPROM_BASE 0x6000 /* - * Common ar5xxx EEPROM data offsets (set these on AR5K_EEPROM_BASE) - */ -#define AR5K_EEPROM_MAGIC 0x003d /* EEPROM Magic number */ -#define AR5K_EEPROM_MAGIC_VALUE 0x5aa5 /* Default - found on EEPROM */ -#define AR5K_EEPROM_MAGIC_5212 0x0000145c /* 5212 */ -#define AR5K_EEPROM_MAGIC_5211 0x0000145b /* 5211 */ -#define AR5K_EEPROM_MAGIC_5210 0x0000145a /* 5210 */ - -#define AR5K_EEPROM_PROTECT 0x003f /* EEPROM protect status */ -#define AR5K_EEPROM_PROTECT_RD_0_31 0x0001 /* Read protection bit for offsets 0x0 - 0x1f */ -#define AR5K_EEPROM_PROTECT_WR_0_31 0x0002 /* Write protection bit for offsets 0x0 - 0x1f */ -#define AR5K_EEPROM_PROTECT_RD_32_63 0x0004 /* 0x20 - 0x3f */ -#define AR5K_EEPROM_PROTECT_WR_32_63 0x0008 -#define AR5K_EEPROM_PROTECT_RD_64_127 0x0010 /* 0x40 - 0x7f */ -#define AR5K_EEPROM_PROTECT_WR_64_127 0x0020 -#define AR5K_EEPROM_PROTECT_RD_128_191 0x0040 /* 0x80 - 0xbf (regdom) */ -#define AR5K_EEPROM_PROTECT_WR_128_191 0x0080 -#define AR5K_EEPROM_PROTECT_RD_192_207 0x0100 /* 0xc0 - 0xcf */ -#define AR5K_EEPROM_PROTECT_WR_192_207 0x0200 -#define AR5K_EEPROM_PROTECT_RD_208_223 0x0400 /* 0xd0 - 0xdf */ -#define AR5K_EEPROM_PROTECT_WR_208_223 0x0800 -#define AR5K_EEPROM_PROTECT_RD_224_239 0x1000 /* 0xe0 - 0xef */ -#define AR5K_EEPROM_PROTECT_WR_224_239 0x2000 -#define AR5K_EEPROM_PROTECT_RD_240_255 0x4000 /* 0xf0 - 0xff */ -#define AR5K_EEPROM_PROTECT_WR_240_255 0x8000 -#define AR5K_EEPROM_REG_DOMAIN 0x00bf /* EEPROM regdom */ -#define AR5K_EEPROM_INFO_BASE 0x00c0 /* EEPROM header */ -#define AR5K_EEPROM_INFO_MAX (0x400 - AR5K_EEPROM_INFO_BASE) -#define AR5K_EEPROM_INFO_CKSUM 0xffff -#define AR5K_EEPROM_INFO(_n) (AR5K_EEPROM_INFO_BASE + (_n)) - -#define AR5K_EEPROM_VERSION AR5K_EEPROM_INFO(1) /* EEPROM Version */ -#define AR5K_EEPROM_VERSION_3_0 0x3000 /* No idea what's going on before this version */ -#define AR5K_EEPROM_VERSION_3_1 0x3001 /* ob/db values for 2Ghz (ar5211_rfregs) */ -#define AR5K_EEPROM_VERSION_3_2 0x3002 /* different frequency representation (eeprom_bin2freq) */ -#define AR5K_EEPROM_VERSION_3_3 0x3003 /* offsets changed, has 32 CTLs (see below) and ee_false_detect (eeprom_read_modes) */ -#define AR5K_EEPROM_VERSION_3_4 0x3004 /* has ee_i_gain ee_cck_ofdm_power_delta (eeprom_read_modes) */ -#define AR5K_EEPROM_VERSION_4_0 0x4000 /* has ee_misc*, ee_cal_pier, ee_turbo_max_power and ee_xr_power (eeprom_init) */ -#define AR5K_EEPROM_VERSION_4_1 0x4001 /* has ee_margin_tx_rx (eeprom_init) */ -#define AR5K_EEPROM_VERSION_4_2 0x4002 /* has ee_cck_ofdm_gain_delta (eeprom_init) */ -#define AR5K_EEPROM_VERSION_4_3 0x4003 -#define AR5K_EEPROM_VERSION_4_4 0x4004 -#define AR5K_EEPROM_VERSION_4_5 0x4005 -#define AR5K_EEPROM_VERSION_4_6 0x4006 /* has ee_scaled_cck_delta */ -#define AR5K_EEPROM_VERSION_4_7 0x4007 - -#define AR5K_EEPROM_MODE_11A 0 -#define AR5K_EEPROM_MODE_11B 1 -#define AR5K_EEPROM_MODE_11G 2 - -#define AR5K_EEPROM_HDR AR5K_EEPROM_INFO(2) /* Header that contains the device caps */ -#define AR5K_EEPROM_HDR_11A(_v) (((_v) >> AR5K_EEPROM_MODE_11A) & 0x1) -#define AR5K_EEPROM_HDR_11B(_v) (((_v) >> AR5K_EEPROM_MODE_11B) & 0x1) -#define AR5K_EEPROM_HDR_11G(_v) (((_v) >> AR5K_EEPROM_MODE_11G) & 0x1) -#define AR5K_EEPROM_HDR_T_2GHZ_DIS(_v) (((_v) >> 3) & 0x1) /* Disable turbo for 2Ghz (?) */ -#define AR5K_EEPROM_HDR_T_5GHZ_DBM(_v) (((_v) >> 4) & 0x7f) /* Max turbo power for a/XR mode (eeprom_init) */ -#define AR5K_EEPROM_HDR_DEVICE(_v) (((_v) >> 11) & 0x7) -#define AR5K_EEPROM_HDR_T_5GHZ_DIS(_v) (((_v) >> 15) & 0x1) /* Disable turbo for 5Ghz (?) */ -#define AR5K_EEPROM_HDR_RFKILL(_v) (((_v) >> 14) & 0x1) /* Device has RFKill support */ - -#define AR5K_EEPROM_RFKILL_GPIO_SEL 0x0000001c -#define AR5K_EEPROM_RFKILL_GPIO_SEL_S 2 -#define AR5K_EEPROM_RFKILL_POLARITY 0x00000002 -#define AR5K_EEPROM_RFKILL_POLARITY_S 1 - -/* Newer EEPROMs are using a different offset */ -#define AR5K_EEPROM_OFF(_v, _v3_0, _v3_3) \ - (((_v) >= AR5K_EEPROM_VERSION_3_3) ? _v3_3 : _v3_0) - -#define AR5K_EEPROM_ANT_GAIN(_v) AR5K_EEPROM_OFF(_v, 0x00c4, 0x00c3) -#define AR5K_EEPROM_ANT_GAIN_5GHZ(_v) ((int8_t)(((_v) >> 8) & 0xff)) -#define AR5K_EEPROM_ANT_GAIN_2GHZ(_v) ((int8_t)((_v) & 0xff)) - -/* calibration settings */ -#define AR5K_EEPROM_MODES_11A(_v) AR5K_EEPROM_OFF(_v, 0x00c5, 0x00d4) -#define AR5K_EEPROM_MODES_11B(_v) AR5K_EEPROM_OFF(_v, 0x00d0, 0x00f2) -#define AR5K_EEPROM_MODES_11G(_v) AR5K_EEPROM_OFF(_v, 0x00da, 0x010d) -#define AR5K_EEPROM_CTL(_v) AR5K_EEPROM_OFF(_v, 0x00e4, 0x0128) /* Conformance test limits */ - -/* [3.1 - 3.3] */ -#define AR5K_EEPROM_OBDB0_2GHZ 0x00ec -#define AR5K_EEPROM_OBDB1_2GHZ 0x00ed - -/* Misc values available since EEPROM 4.0 */ -#define AR5K_EEPROM_MISC0 0x00c4 -#define AR5K_EEPROM_EARSTART(_v) ((_v) & 0xfff) -#define AR5K_EEPROM_EEMAP(_v) (((_v) >> 14) & 0x3) -#define AR5K_EEPROM_MISC1 0x00c5 -#define AR5K_EEPROM_TARGET_PWRSTART(_v) ((_v) & 0xfff) -#define AR5K_EEPROM_HAS32KHZCRYSTAL(_v) (((_v) >> 14) & 0x1) - -/* * EEPROM data register */ #define AR5K_EEPROM_DATA_5211 0x6004 @@ -1950,13 +1858,13 @@ #define AR5K_PHY_GAIN_OFFSET_RXTX_FLAG 0x00020000 /* RX-TX flag (?) */ /* - * Desired size register + * Desired ADC/PGA size register * (for more infos read ANI patent) */ #define AR5K_PHY_DESIRED_SIZE 0x9850 /* Register Address */ #define AR5K_PHY_DESIRED_SIZE_ADC 0x000000ff /* Mask for ADC desired size */ #define AR5K_PHY_DESIRED_SIZE_PGA 0x0000ff00 /* Mask for PGA desired size */ -#define AR5K_PHY_DESIRED_SIZE_TOT 0x0ff00000 /* Mask for Total desired size (?) */ +#define AR5K_PHY_DESIRED_SIZE_TOT 0x0ff00000 /* Mask for Total desired size */ /* * PHY signal register diff --git a/drivers/net/wireless/ath5k/reset.c b/drivers/net/wireless/ath5k/reset.c new file mode 100644 index 00000000000..d260fba0180 --- /dev/null +++ b/drivers/net/wireless/ath5k/reset.c @@ -0,0 +1,925 @@ +/* + * Copyright (c) 2004-2008 Reyk Floeter <reyk@openbsd.org> + * Copyright (c) 2006-2008 Nick Kossifidis <mickflemm@gmail.com> + * Copyright (c) 2007-2008 Luis Rodriguez <mcgrof@winlab.rutgers.edu> + * Copyright (c) 2007-2008 Pavel Roskin <proski@gnu.org> + * Copyright (c) 2007-2008 Jiri Slaby <jirislaby@gmail.com> + * + * Permission to use, copy, modify, and distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * + */ + +#define _ATH5K_RESET + +/*****************************\ + Reset functions and helpers +\*****************************/ + +#include <linux/pci.h> +#include "ath5k.h" +#include "reg.h" +#include "base.h" +#include "debug.h" + +/** + * ath5k_hw_write_ofdm_timings - set OFDM timings on AR5212 + * + * @ah: the &struct ath5k_hw + * @channel: the currently set channel upon reset + * + * Write the OFDM timings for the AR5212 upon reset. This is a helper for + * ath5k_hw_reset(). This seems to tune the PLL a specified frequency + * depending on the bandwidth of the channel. + * + */ +static inline int ath5k_hw_write_ofdm_timings(struct ath5k_hw *ah, + struct ieee80211_channel *channel) +{ + /* Get exponent and mantissa and set it */ + u32 coef_scaled, coef_exp, coef_man, + ds_coef_exp, ds_coef_man, clock; + + if (!(ah->ah_version == AR5K_AR5212) || + !(channel->hw_value & CHANNEL_OFDM)) + BUG(); + + /* Seems there are two PLLs, one for baseband sampling and one + * for tuning. Tuning basebands are 40 MHz or 80MHz when in + * turbo. */ + clock = channel->hw_value & CHANNEL_TURBO ? 80 : 40; + coef_scaled = ((5 * (clock << 24)) / 2) / + channel->center_freq; + + for (coef_exp = 31; coef_exp > 0; coef_exp--) + if ((coef_scaled >> coef_exp) & 0x1) + break; + + if (!coef_exp) + return -EINVAL; + + coef_exp = 14 - (coef_exp - 24); + coef_man = coef_scaled + + (1 << (24 - coef_exp - 1)); + ds_coef_man = coef_man >> (24 - coef_exp); + ds_coef_exp = coef_exp - 16; + + AR5K_REG_WRITE_BITS(ah, AR5K_PHY_TIMING_3, + AR5K_PHY_TIMING_3_DSC_MAN, ds_coef_man); + AR5K_REG_WRITE_BITS(ah, AR5K_PHY_TIMING_3, + AR5K_PHY_TIMING_3_DSC_EXP, ds_coef_exp); + + return 0; +} + + +/* + * index into rates for control rates, we can set it up like this because + * this is only used for AR5212 and we know it supports G mode + */ +static int control_rates[] = + { 0, 1, 1, 1, 4, 4, 6, 6, 8, 8, 8, 8 }; + +/** + * ath5k_hw_write_rate_duration - set rate duration during hw resets + * + * @ah: the &struct ath5k_hw + * @mode: one of enum ath5k_driver_mode + * + * Write the rate duration table upon hw reset. This is a helper for + * ath5k_hw_reset(). It seems all this is doing is setting an ACK timeout for + * the hardware for the current mode for each rate. The rates which are capable + * of short preamble (802.11b rates 2Mbps, 5.5Mbps, and 11Mbps) have another + * register for the short preamble ACK timeout calculation. + */ +static inline void ath5k_hw_write_rate_duration(struct ath5k_hw *ah, + unsigned int mode) +{ + struct ath5k_softc *sc = ah->ah_sc; + struct ieee80211_rate *rate; + unsigned int i; + + /* Write rate duration table */ + for (i = 0; i < sc->sbands[IEEE80211_BAND_2GHZ].n_bitrates; i++) { + u32 reg; + u16 tx_time; + + rate = &sc->sbands[IEEE80211_BAND_2GHZ].bitrates[control_rates[i]]; + + /* Set ACK timeout */ + reg = AR5K_RATE_DUR(rate->hw_value); + + /* An ACK frame consists of 10 bytes. If you add the FCS, + * which ieee80211_generic_frame_duration() adds, + * its 14 bytes. Note we use the control rate and not the + * actual rate for this rate. See mac80211 tx.c + * ieee80211_duration() for a brief description of + * what rate we should choose to TX ACKs. */ + tx_time = le16_to_cpu(ieee80211_generic_frame_duration(sc->hw, + sc->vif, 10, rate)); + + ath5k_hw_reg_write(ah, tx_time, reg); + + if (!(rate->flags & IEEE80211_RATE_SHORT_PREAMBLE)) + continue; + + /* + * We're not distinguishing short preamble here, + * This is true, all we'll get is a longer value here + * which is not necessarilly bad. We could use + * export ieee80211_frame_duration() but that needs to be + * fixed first to be properly used by mac802111 drivers: + * + * - remove erp stuff and let the routine figure ofdm + * erp rates + * - remove passing argument ieee80211_local as + * drivers don't have access to it + * - move drivers using ieee80211_generic_frame_duration() + * to this + */ + ath5k_hw_reg_write(ah, tx_time, + reg + (AR5K_SET_SHORT_PREAMBLE << 2)); + } +} + +/* + * Reset chipset + */ +static int ath5k_hw_nic_reset(struct ath5k_hw *ah, u32 val) +{ + int ret; + u32 mask = val ? val : ~0U; + + ATH5K_TRACE(ah->ah_sc); + + /* Read-and-clear RX Descriptor Pointer*/ + ath5k_hw_reg_read(ah, AR5K_RXDP); + + /* + * Reset the device and wait until success + */ + ath5k_hw_reg_write(ah, val, AR5K_RESET_CTL); + + /* Wait at least 128 PCI clocks */ + udelay(15); + + if (ah->ah_version == AR5K_AR5210) { + val &= AR5K_RESET_CTL_CHIP; + mask &= AR5K_RESET_CTL_CHIP; + } else { + val &= AR5K_RESET_CTL_PCU | AR5K_RESET_CTL_BASEBAND; + mask &= AR5K_RESET_CTL_PCU | AR5K_RESET_CTL_BASEBAND; + } + + ret = ath5k_hw_register_timeout(ah, AR5K_RESET_CTL, mask, val, false); + + /* + * Reset configuration register (for hw byte-swap). Note that this + * is only set for big endian. We do the necessary magic in + * AR5K_INIT_CFG. + */ + if ((val & AR5K_RESET_CTL_PCU) == 0) + ath5k_hw_reg_write(ah, AR5K_INIT_CFG, AR5K_CFG); + + return ret; +} + +/* + * Sleep control + */ +int ath5k_hw_set_power(struct ath5k_hw *ah, enum ath5k_power_mode mode, + bool set_chip, u16 sleep_duration) +{ + unsigned int i; + u32 staid, data; + + ATH5K_TRACE(ah->ah_sc); + staid = ath5k_hw_reg_read(ah, AR5K_STA_ID1); + + switch (mode) { + case AR5K_PM_AUTO: + staid &= ~AR5K_STA_ID1_DEFAULT_ANTENNA; + /* fallthrough */ + case AR5K_PM_NETWORK_SLEEP: + if (set_chip) + ath5k_hw_reg_write(ah, + AR5K_SLEEP_CTL_SLE_ALLOW | + sleep_duration, + AR5K_SLEEP_CTL); + + staid |= AR5K_STA_ID1_PWR_SV; + break; + + case AR5K_PM_FULL_SLEEP: + if (set_chip) + ath5k_hw_reg_write(ah, AR5K_SLEEP_CTL_SLE_SLP, + AR5K_SLEEP_CTL); + + staid |= AR5K_STA_ID1_PWR_SV; + break; + + case AR5K_PM_AWAKE: + + staid &= ~AR5K_STA_ID1_PWR_SV; + + if (!set_chip) + goto commit; + + /* Preserve sleep duration */ + data = ath5k_hw_reg_read(ah, AR5K_SLEEP_CTL); + if (data & 0xffc00000) + data = 0; + else + data = data & 0xfffcffff; + + ath5k_hw_reg_write(ah, data, AR5K_SLEEP_CTL); + udelay(15); + + for (i = 50; i > 0; i--) { + /* Check if the chip did wake up */ + if ((ath5k_hw_reg_read(ah, AR5K_PCICFG) & + AR5K_PCICFG_SPWR_DN) == 0) + break; + + /* Wait a bit and retry */ + udelay(200); + ath5k_hw_reg_write(ah, data, AR5K_SLEEP_CTL); + } + + /* Fail if the chip didn't wake up */ + if (i <= 0) + return -EIO; + + break; + + default: + return -EINVAL; + } + +commit: + ah->ah_power_mode = mode; + ath5k_hw_reg_write(ah, staid, AR5K_STA_ID1); + + return 0; +} + +/* + * Bring up MAC + PHY Chips + */ +int ath5k_hw_nic_wakeup(struct ath5k_hw *ah, int flags, bool initial) +{ + struct pci_dev *pdev = ah->ah_sc->pdev; + u32 turbo, mode, clock, bus_flags; + int ret; + + turbo = 0; + mode = 0; + clock = 0; + + ATH5K_TRACE(ah->ah_sc); + + /* Wakeup the device */ + ret = ath5k_hw_set_power(ah, AR5K_PM_AWAKE, true, 0); + if (ret) { + ATH5K_ERR(ah->ah_sc, "failed to wakeup the MAC Chip\n"); + return ret; + } + + if (ah->ah_version != AR5K_AR5210) { + /* + * Get channel mode flags + */ + + if (ah->ah_radio >= AR5K_RF5112) { + mode = AR5K_PHY_MODE_RAD_RF5112; + clock = AR5K_PHY_PLL_RF5112; + } else { + mode = AR5K_PHY_MODE_RAD_RF5111; /*Zero*/ + clock = AR5K_PHY_PLL_RF5111; /*Zero*/ + } + + if (flags & CHANNEL_2GHZ) { + mode |= AR5K_PHY_MODE_FREQ_2GHZ; + clock |= AR5K_PHY_PLL_44MHZ; + + if (flags & CHANNEL_CCK) { + mode |= AR5K_PHY_MODE_MOD_CCK; + } else if (flags & CHANNEL_OFDM) { + /* XXX Dynamic OFDM/CCK is not supported by the + * AR5211 so we set MOD_OFDM for plain g (no + * CCK headers) operation. We need to test + * this, 5211 might support ofdm-only g after + * all, there are also initial register values + * in the code for g mode (see initvals.c). */ + if (ah->ah_version == AR5K_AR5211) + mode |= AR5K_PHY_MODE_MOD_OFDM; + else + mode |= AR5K_PHY_MODE_MOD_DYN; + } else { + ATH5K_ERR(ah->ah_sc, + "invalid radio modulation mode\n"); + return -EINVAL; + } + } else if (flags & CHANNEL_5GHZ) { + mode |= AR5K_PHY_MODE_FREQ_5GHZ; + clock |= AR5K_PHY_PLL_40MHZ; + + if (flags & CHANNEL_OFDM) + mode |= AR5K_PHY_MODE_MOD_OFDM; + else { + ATH5K_ERR(ah->ah_sc, + "invalid radio modulation mode\n"); + return -EINVAL; + } + } else { + ATH5K_ERR(ah->ah_sc, "invalid radio frequency mode\n"); + return -EINVAL; + } + + if (flags & CHANNEL_TURBO) + turbo = AR5K_PHY_TURBO_MODE | AR5K_PHY_TURBO_SHORT; + } else { /* Reset the device */ + + /* ...enable Atheros turbo mode if requested */ + if (flags & CHANNEL_TURBO) + ath5k_hw_reg_write(ah, AR5K_PHY_TURBO_MODE, + AR5K_PHY_TURBO); + } + + /* reseting PCI on PCI-E cards results card to hang + * and always return 0xffff... so we ingore that flag + * for PCI-E cards */ + bus_flags = (pdev->is_pcie) ? 0 : AR5K_RESET_CTL_PCI; + + /* Reset chipset */ + ret = ath5k_hw_nic_reset(ah, AR5K_RESET_CTL_PCU | + AR5K_RESET_CTL_BASEBAND | bus_flags); + if (ret) { + ATH5K_ERR(ah->ah_sc, "failed to reset the MAC Chip\n"); + return -EIO; + } + + if (ah->ah_version == AR5K_AR5210) + udelay(2300); + + /* ...wakeup again!*/ + ret = ath5k_hw_set_power(ah, AR5K_PM_AWAKE, true, 0); + if (ret) { + ATH5K_ERR(ah->ah_sc, "failed to resume the MAC Chip\n"); + return ret; + } + + /* ...final warm reset */ + if (ath5k_hw_nic_reset(ah, 0)) { + ATH5K_ERR(ah->ah_sc, "failed to warm reset the MAC Chip\n"); + return -EIO; + } + + if (ah->ah_version != AR5K_AR5210) { + /* ...set the PHY operating mode */ + ath5k_hw_reg_write(ah, clock, AR5K_PHY_PLL); + udelay(300); + + ath5k_hw_reg_write(ah, mode, AR5K_PHY_MODE); + ath5k_hw_reg_write(ah, turbo, AR5K_PHY_TURBO); + } + + return 0; +} + +/* + * Main reset function + */ +int ath5k_hw_reset(struct ath5k_hw *ah, enum ieee80211_if_types op_mode, + struct ieee80211_channel *channel, bool change_channel) +{ + struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; + struct pci_dev *pdev = ah->ah_sc->pdev; + u32 data, s_seq, s_ant, s_led[3], dma_size; + unsigned int i, mode, freq, ee_mode, ant[2]; + int ret; + + ATH5K_TRACE(ah->ah_sc); + + s_seq = 0; + s_ant = 0; + ee_mode = 0; + freq = 0; + mode = 0; + + /* + * Save some registers before a reset + */ + /*DCU/Antenna selection not available on 5210*/ + if (ah->ah_version != AR5K_AR5210) { + if (change_channel) { + /* Seq number for queue 0 -do this for all queues ? */ + s_seq = ath5k_hw_reg_read(ah, + AR5K_QUEUE_DFS_SEQNUM(0)); + /*Default antenna*/ + s_ant = ath5k_hw_reg_read(ah, AR5K_DEFAULT_ANTENNA); + } + } + + /*GPIOs*/ + s_led[0] = ath5k_hw_reg_read(ah, AR5K_PCICFG) & AR5K_PCICFG_LEDSTATE; + s_led[1] = ath5k_hw_reg_read(ah, AR5K_GPIOCR); + s_led[2] = ath5k_hw_reg_read(ah, AR5K_GPIODO); + + if (change_channel && ah->ah_rf_banks != NULL) + ath5k_hw_get_rf_gain(ah); + + + /*Wakeup the device*/ + ret = ath5k_hw_nic_wakeup(ah, channel->hw_value, false); + if (ret) + return ret; + + /* + * Initialize operating mode + */ + ah->ah_op_mode = op_mode; + + /* + * 5111/5112 Settings + * 5210 only comes with RF5110 + */ + if (ah->ah_version != AR5K_AR5210) { + if (ah->ah_radio != AR5K_RF5111 && + ah->ah_radio != AR5K_RF5112 && + ah->ah_radio != AR5K_RF5413 && + ah->ah_radio != AR5K_RF2413 && + ah->ah_radio != AR5K_RF2425) { + ATH5K_ERR(ah->ah_sc, + "invalid phy radio: %u\n", ah->ah_radio); + return -EINVAL; + } + + switch (channel->hw_value & CHANNEL_MODES) { + case CHANNEL_A: + mode = AR5K_MODE_11A; + freq = AR5K_INI_RFGAIN_5GHZ; + ee_mode = AR5K_EEPROM_MODE_11A; + break; + case CHANNEL_G: + mode = AR5K_MODE_11G; + freq = AR5K_INI_RFGAIN_2GHZ; + ee_mode = AR5K_EEPROM_MODE_11G; + break; + case CHANNEL_B: + mode = AR5K_MODE_11B; + freq = AR5K_INI_RFGAIN_2GHZ; + ee_mode = AR5K_EEPROM_MODE_11B; + break; + case CHANNEL_T: + mode = AR5K_MODE_11A_TURBO; + freq = AR5K_INI_RFGAIN_5GHZ; + ee_mode = AR5K_EEPROM_MODE_11A; + break; + /*Is this ok on 5211 too ?*/ + case CHANNEL_TG: + mode = AR5K_MODE_11G_TURBO; + freq = AR5K_INI_RFGAIN_2GHZ; + ee_mode = AR5K_EEPROM_MODE_11G; + break; + case CHANNEL_XR: + if (ah->ah_version == AR5K_AR5211) { + ATH5K_ERR(ah->ah_sc, + "XR mode not available on 5211"); + return -EINVAL; + } + mode = AR5K_MODE_XR; + freq = AR5K_INI_RFGAIN_5GHZ; + ee_mode = AR5K_EEPROM_MODE_11A; + break; + default: + ATH5K_ERR(ah->ah_sc, + "invalid channel: %d\n", channel->center_freq); + return -EINVAL; + } + + /* PHY access enable */ + ath5k_hw_reg_write(ah, AR5K_PHY_SHIFT_5GHZ, AR5K_PHY(0)); + + } + + ret = ath5k_hw_write_initvals(ah, mode, change_channel); + if (ret) + return ret; + + /* + * 5211/5212 Specific + */ + if (ah->ah_version != AR5K_AR5210) { + /* + * Write initial RF gain settings + * This should work for both 5111/5112 + */ + ret = ath5k_hw_rfgain(ah, freq); + if (ret) + return ret; + + mdelay(1); + + /* + * Write some more initial register settings + */ + if (ah->ah_version == AR5K_AR5212) { + ath5k_hw_reg_write(ah, 0x0002a002, 0x982c); + + if (channel->hw_value == CHANNEL_G) + if (ah->ah_mac_srev < AR5K_SREV_VER_AR2413) + ath5k_hw_reg_write(ah, 0x00f80d80, + 0x994c); + else if (ah->ah_mac_srev < AR5K_SREV_VER_AR2424) + ath5k_hw_reg_write(ah, 0x00380140, + 0x994c); + else if (ah->ah_mac_srev < AR5K_SREV_VER_AR2425) + ath5k_hw_reg_write(ah, 0x00fc0ec0, + 0x994c); + else /* 2425 */ + ath5k_hw_reg_write(ah, 0x00fc0fc0, + 0x994c); + else + ath5k_hw_reg_write(ah, 0x00000000, 0x994c); + + /* Some bits are disabled here, we know nothing about + * register 0xa228 yet, most of the times this ends up + * with a value 0x9b5 -haven't seen any dump with + * a different value- */ + /* Got this from decompiling binary HAL */ + data = ath5k_hw_reg_read(ah, 0xa228); + data &= 0xfffffdff; + ath5k_hw_reg_write(ah, data, 0xa228); + + data = ath5k_hw_reg_read(ah, 0xa228); + data &= 0xfffe03ff; + ath5k_hw_reg_write(ah, data, 0xa228); + data = 0; + + /* Just write 0x9b5 ? */ + /* ath5k_hw_reg_write(ah, 0x000009b5, 0xa228); */ + ath5k_hw_reg_write(ah, 0x0000000f, AR5K_SEQ_MASK); + ath5k_hw_reg_write(ah, 0x00000000, 0xa254); + ath5k_hw_reg_write(ah, 0x0000000e, AR5K_PHY_SCAL); + } + + /* Fix for first revision of the RF5112 RF chipset */ + if (ah->ah_radio >= AR5K_RF5112 && + ah->ah_radio_5ghz_revision < + AR5K_SREV_RAD_5112A) { + ath5k_hw_reg_write(ah, AR5K_PHY_CCKTXCTL_WORLD, + AR5K_PHY_CCKTXCTL); + if (channel->hw_value & CHANNEL_5GHZ) + data = 0xffb81020; + else + data = 0xffb80d20; + ath5k_hw_reg_write(ah, data, AR5K_PHY_FRAME_CTL); + data = 0; + } + + /* + * Set TX power (FIXME) + */ + ret = ath5k_hw_txpower(ah, channel, AR5K_TUNE_DEFAULT_TXPOWER); + if (ret) + return ret; + + /* Write rate duration table only on AR5212 and if + * virtual interface has already been brought up + * XXX: rethink this after new mode changes to + * mac80211 are integrated */ + if (ah->ah_version == AR5K_AR5212 && + ah->ah_sc->vif != NULL) + ath5k_hw_write_rate_duration(ah, mode); + + /* + * Write RF registers + */ + ret = ath5k_hw_rfregs(ah, channel, mode); + if (ret) + return ret; + + /* + * Configure additional registers + */ + + /* Write OFDM timings on 5212*/ + if (ah->ah_version == AR5K_AR5212 && + channel->hw_value & CHANNEL_OFDM) { + ret = ath5k_hw_write_ofdm_timings(ah, channel); + if (ret) + return ret; + } + + /*Enable/disable 802.11b mode on 5111 + (enable 2111 frequency converter + CCK)*/ + if (ah->ah_radio == AR5K_RF5111) { + if (mode == AR5K_MODE_11B) + AR5K_REG_ENABLE_BITS(ah, AR5K_TXCFG, + AR5K_TXCFG_B_MODE); + else + AR5K_REG_DISABLE_BITS(ah, AR5K_TXCFG, + AR5K_TXCFG_B_MODE); + } + + /* + * Set channel and calibrate the PHY + */ + ret = ath5k_hw_channel(ah, channel); + if (ret) + return ret; + + /* Set antenna mode */ + AR5K_REG_MASKED_BITS(ah, AR5K_PHY_ANT_CTL, + ah->ah_antenna[ee_mode][0], 0xfffffc06); + + /* + * In case a fixed antenna was set as default + * write the same settings on both AR5K_PHY_ANT_SWITCH_TABLE + * registers. + */ + if (s_ant != 0) { + if (s_ant == AR5K_ANT_FIXED_A) /* 1 - Main */ + ant[0] = ant[1] = AR5K_ANT_FIXED_A; + else /* 2 - Aux */ + ant[0] = ant[1] = AR5K_ANT_FIXED_B; + } else { + ant[0] = AR5K_ANT_FIXED_A; + ant[1] = AR5K_ANT_FIXED_B; + } + + ath5k_hw_reg_write(ah, ah->ah_antenna[ee_mode][ant[0]], + AR5K_PHY_ANT_SWITCH_TABLE_0); + ath5k_hw_reg_write(ah, ah->ah_antenna[ee_mode][ant[1]], + AR5K_PHY_ANT_SWITCH_TABLE_1); + + /* Commit values from EEPROM */ + if (ah->ah_radio == AR5K_RF5111) + AR5K_REG_WRITE_BITS(ah, AR5K_PHY_FRAME_CTL, + AR5K_PHY_FRAME_CTL_TX_CLIP, ee->ee_tx_clip); + + ath5k_hw_reg_write(ah, + AR5K_PHY_NF_SVAL(ee->ee_noise_floor_thr[ee_mode]), + AR5K_PHY_NFTHRES); + + AR5K_REG_MASKED_BITS(ah, AR5K_PHY_SETTLING, + (ee->ee_switch_settling[ee_mode] << 7) & 0x3f80, + 0xffffc07f); + AR5K_REG_MASKED_BITS(ah, AR5K_PHY_GAIN, + (ee->ee_ant_tx_rx[ee_mode] << 12) & 0x3f000, + 0xfffc0fff); + AR5K_REG_MASKED_BITS(ah, AR5K_PHY_DESIRED_SIZE, + (ee->ee_adc_desired_size[ee_mode] & 0x00ff) | + ((ee->ee_pga_desired_size[ee_mode] << 8) & 0xff00), + 0xffff0000); + + ath5k_hw_reg_write(ah, + (ee->ee_tx_end2xpa_disable[ee_mode] << 24) | + (ee->ee_tx_end2xpa_disable[ee_mode] << 16) | + (ee->ee_tx_frm2xpa_enable[ee_mode] << 8) | + (ee->ee_tx_frm2xpa_enable[ee_mode]), AR5K_PHY_RF_CTL4); + + AR5K_REG_MASKED_BITS(ah, AR5K_PHY_RF_CTL3, + ee->ee_tx_end2xlna_enable[ee_mode] << 8, 0xffff00ff); + AR5K_REG_MASKED_BITS(ah, AR5K_PHY_NF, + (ee->ee_thr_62[ee_mode] << 12) & 0x7f000, 0xfff80fff); + AR5K_REG_MASKED_BITS(ah, AR5K_PHY_OFDM_SELFCORR, 4, 0xffffff01); + + AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_IQ, + AR5K_PHY_IQ_CORR_ENABLE | + (ee->ee_i_cal[ee_mode] << AR5K_PHY_IQ_CORR_Q_I_COFF_S) | + ee->ee_q_cal[ee_mode]); + + if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_1) + AR5K_REG_WRITE_BITS(ah, AR5K_PHY_GAIN_2GHZ, + AR5K_PHY_GAIN_2GHZ_MARGIN_TXRX, + ee->ee_margin_tx_rx[ee_mode]); + + } else { + mdelay(1); + /* Disable phy and wait */ + ath5k_hw_reg_write(ah, AR5K_PHY_ACT_DISABLE, AR5K_PHY_ACT); + mdelay(1); + } + + /* + * Restore saved values + */ + /*DCU/Antenna selection not available on 5210*/ + if (ah->ah_version != AR5K_AR5210) { + ath5k_hw_reg_write(ah, s_seq, AR5K_QUEUE_DFS_SEQNUM(0)); + ath5k_hw_reg_write(ah, s_ant, AR5K_DEFAULT_ANTENNA); + } + AR5K_REG_ENABLE_BITS(ah, AR5K_PCICFG, s_led[0]); + ath5k_hw_reg_write(ah, s_led[1], AR5K_GPIOCR); + ath5k_hw_reg_write(ah, s_led[2], AR5K_GPIODO); + + /* + * Misc + */ + /* XXX: add ah->aid once mac80211 gives this to us */ + ath5k_hw_set_associd(ah, ah->ah_bssid, 0); + + ath5k_hw_set_opmode(ah); + /*PISR/SISR Not available on 5210*/ + if (ah->ah_version != AR5K_AR5210) { + ath5k_hw_reg_write(ah, 0xffffffff, AR5K_PISR); + /* If we later allow tuning for this, store into sc structure */ + data = AR5K_TUNE_RSSI_THRES | + AR5K_TUNE_BMISS_THRES << AR5K_RSSI_THR_BMISS_S; + ath5k_hw_reg_write(ah, data, AR5K_RSSI_THR); + } + + /* + * Set Rx/Tx DMA Configuration + * + * Set maximum DMA size (512) except for PCI-E cards since + * it causes rx overruns and tx errors (tested on 5424 but since + * rx overruns also occur on 5416/5418 with madwifi we set 128 + * for all PCI-E cards to be safe). + * + * In dumps this is 128 for allchips. + * + * XXX: need to check 5210 for this + * TODO: Check out tx triger level, it's always 64 on dumps but I + * guess we can tweak it and see how it goes ;-) + */ + dma_size = (pdev->is_pcie) ? AR5K_DMASIZE_128B : AR5K_DMASIZE_512B; + if (ah->ah_version != AR5K_AR5210) { + AR5K_REG_WRITE_BITS(ah, AR5K_TXCFG, + AR5K_TXCFG_SDMAMR, dma_size); + AR5K_REG_WRITE_BITS(ah, AR5K_RXCFG, + AR5K_RXCFG_SDMAMW, dma_size); + } + + /* + * Enable the PHY and wait until completion + */ + ath5k_hw_reg_write(ah, AR5K_PHY_ACT_ENABLE, AR5K_PHY_ACT); + + /* + * On 5211+ read activation -> rx delay + * and use it. + */ + if (ah->ah_version != AR5K_AR5210) { + data = ath5k_hw_reg_read(ah, AR5K_PHY_RX_DELAY) & + AR5K_PHY_RX_DELAY_M; + data = (channel->hw_value & CHANNEL_CCK) ? + ((data << 2) / 22) : (data / 10); + + udelay(100 + (2 * data)); + data = 0; + } else { + mdelay(1); + } + + /* + * Perform ADC test (?) + */ + data = ath5k_hw_reg_read(ah, AR5K_PHY_TST1); + ath5k_hw_reg_write(ah, AR5K_PHY_TST1_TXHOLD, AR5K_PHY_TST1); + for (i = 0; i <= 20; i++) { + if (!(ath5k_hw_reg_read(ah, AR5K_PHY_ADC_TEST) & 0x10)) + break; + udelay(200); + } + ath5k_hw_reg_write(ah, data, AR5K_PHY_TST1); + data = 0; + + /* + * Start automatic gain calibration + * + * During AGC calibration RX path is re-routed to + * a signal detector so we don't receive anything. + * + * This method is used to calibrate some static offsets + * used together with on-the fly I/Q calibration (the + * one performed via ath5k_hw_phy_calibrate), that doesn't + * interrupt rx path. + * + * If we are in a noisy environment AGC calibration may time + * out. + */ + AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_AGCCTL, + AR5K_PHY_AGCCTL_CAL); + + /* At the same time start I/Q calibration for QAM constellation + * -no need for CCK- */ + ah->ah_calibration = false; + if (!(mode == AR5K_MODE_11B)) { + ah->ah_calibration = true; + AR5K_REG_WRITE_BITS(ah, AR5K_PHY_IQ, + AR5K_PHY_IQ_CAL_NUM_LOG_MAX, 15); + AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_IQ, + AR5K_PHY_IQ_RUN); + } + + /* Wait for gain calibration to finish (we check for I/Q calibration + * during ath5k_phy_calibrate) */ + if (ath5k_hw_register_timeout(ah, AR5K_PHY_AGCCTL, + AR5K_PHY_AGCCTL_CAL, 0, false)) { + ATH5K_ERR(ah->ah_sc, "gain calibration timeout (%uMHz)\n", + channel->center_freq); + return -EAGAIN; + } + + /* + * Start noise floor calibration + * + * If we run NF calibration before AGC, it always times out. + * Binary HAL starts NF and AGC calibration at the same time + * and only waits for AGC to finish. I believe that's wrong because + * during NF calibration, rx path is also routed to a detector, so if + * it doesn't finish we won't have RX. + * + * XXX: Find an interval that's OK for all cards... + */ + ret = ath5k_hw_noise_floor_calibration(ah, channel->center_freq); + if (ret) + return ret; + + /* + * Reset queues and start beacon timers at the end of the reset routine + */ + for (i = 0; i < ah->ah_capabilities.cap_queues.q_tx_num; i++) { + /*No QCU on 5210*/ + if (ah->ah_version != AR5K_AR5210) + AR5K_REG_WRITE_Q(ah, AR5K_QUEUE_QCUMASK(i), i); + + ret = ath5k_hw_reset_tx_queue(ah, i); + if (ret) { + ATH5K_ERR(ah->ah_sc, + "failed to reset TX queue #%d\n", i); + return ret; + } + } + + /* Pre-enable interrupts on 5211/5212*/ + if (ah->ah_version != AR5K_AR5210) + ath5k_hw_set_imr(ah, AR5K_INT_RX | AR5K_INT_TX | + AR5K_INT_FATAL); + + /* + * Set RF kill flags if supported by the device (read from the EEPROM) + * Disable gpio_intr for now since it results system hang. + * TODO: Handle this in ath5k_intr + */ +#if 0 + if (AR5K_EEPROM_HDR_RFKILL(ah->ah_capabilities.cap_eeprom.ee_header)) { + ath5k_hw_set_gpio_input(ah, 0); + ah->ah_gpio[0] = ath5k_hw_get_gpio(ah, 0); + if (ah->ah_gpio[0] == 0) + ath5k_hw_set_gpio_intr(ah, 0, 1); + else + ath5k_hw_set_gpio_intr(ah, 0, 0); + } +#endif + + /* + * Set the 32MHz reference clock on 5212 phy clock sleep register + * + * TODO: Find out how to switch to external 32Khz clock to save power + */ + if (ah->ah_version == AR5K_AR5212) { + ath5k_hw_reg_write(ah, AR5K_PHY_SCR_32MHZ, AR5K_PHY_SCR); + ath5k_hw_reg_write(ah, AR5K_PHY_SLMT_32MHZ, AR5K_PHY_SLMT); + ath5k_hw_reg_write(ah, AR5K_PHY_SCAL_32MHZ, AR5K_PHY_SCAL); + ath5k_hw_reg_write(ah, AR5K_PHY_SCLOCK_32MHZ, AR5K_PHY_SCLOCK); + ath5k_hw_reg_write(ah, AR5K_PHY_SDELAY_32MHZ, AR5K_PHY_SDELAY); + ath5k_hw_reg_write(ah, ah->ah_phy_spending, AR5K_PHY_SPENDING); + + data = ath5k_hw_reg_read(ah, AR5K_USEC_5211) & 0xffffc07f ; + data |= (ah->ah_phy_spending == AR5K_PHY_SPENDING_18) ? + 0x00000f80 : 0x00001380 ; + ath5k_hw_reg_write(ah, data, AR5K_USEC_5211); + data = 0; + } + + if (ah->ah_version == AR5K_AR5212) { + ath5k_hw_reg_write(ah, 0x000100aa, 0x8118); + ath5k_hw_reg_write(ah, 0x00003210, 0x811c); + ath5k_hw_reg_write(ah, 0x00000052, 0x8108); + if (ah->ah_mac_srev >= AR5K_SREV_VER_AR2413) + ath5k_hw_reg_write(ah, 0x00000004, 0x8120); + } + + /* + * Disable beacons and reset the register + */ + AR5K_REG_DISABLE_BITS(ah, AR5K_BEACON, AR5K_BEACON_ENABLE | + AR5K_BEACON_RESET_TSF); + + return 0; +} + +#undef _ATH5K_RESET diff --git a/drivers/net/wireless/ath9k/Kconfig b/drivers/net/wireless/ath9k/Kconfig index 9e19dcceb3a..80a69243041 100644 --- a/drivers/net/wireless/ath9k/Kconfig +++ b/drivers/net/wireless/ath9k/Kconfig @@ -1,6 +1,9 @@ config ATH9K tristate "Atheros 802.11n wireless cards support" depends on PCI && MAC80211 && WLAN_80211 + select MAC80211_LEDS + select LEDS_CLASS + select NEW_LEDS ---help--- This module adds support for wireless adapters based on Atheros IEEE 802.11n AR5008 and AR9001 family of chipsets. diff --git a/drivers/net/wireless/ath9k/ath9k.h b/drivers/net/wireless/ath9k/ath9k.h index d1b0fbae5a3..28b8d84f49b 100644 --- a/drivers/net/wireless/ath9k/ath9k.h +++ b/drivers/net/wireless/ath9k/ath9k.h @@ -144,6 +144,7 @@ struct ath_desc { #define ATH9K_TXDESC_EXT_AND_CTL 0x0080 #define ATH9K_TXDESC_VMF 0x0100 #define ATH9K_TXDESC_FRAG_IS_ON 0x0200 +#define ATH9K_TXDESC_CAB 0x0400 #define ATH9K_RXDESC_INTREQ 0x0020 @@ -564,8 +565,6 @@ enum ath9k_cipher { #define CTL_5GHT40 8 #define AR_EEPROM_MAC(i) (0x1d+(i)) -#define EEP_SCALE 100 -#define EEP_DELTA 10 #define AR_EEPROM_RFSILENT_GPIO_SEL 0x001c #define AR_EEPROM_RFSILENT_GPIO_SEL_S 2 @@ -606,9 +605,6 @@ struct ath9k_country_entry { #define REG_CLR_BIT(_a, _r, _f) \ REG_WRITE(_a, _r, REG_READ(_a, _r) & ~_f) -#define ATH9K_COMP_BUF_MAX_SIZE 9216 -#define ATH9K_COMP_BUF_ALIGN_SIZE 512 - #define ATH9K_TXQ_USE_LOCKOUT_BKOFF_DIS 0x00000001 #define INIT_AIFS 2 @@ -632,12 +628,6 @@ struct ath9k_country_entry { (IEEE80211_WEP_IVLEN + \ IEEE80211_WEP_KIDLEN + \ IEEE80211_WEP_CRCLEN)) -#define IEEE80211_MAX_LEN (2300 + FCS_LEN + \ - (IEEE80211_WEP_IVLEN + \ - IEEE80211_WEP_KIDLEN + \ - IEEE80211_WEP_CRCLEN)) - -#define MAX_REG_ADD_COUNT 129 #define MAX_RATE_POWER 63 enum ath9k_power_mode { @@ -707,13 +697,6 @@ enum phytype { }; #define PHY_CCK PHY_DS -enum start_adhoc_option { - START_ADHOC_NO_11A, - START_ADHOC_PER_11D, - START_ADHOC_IN_11A, - START_ADHOC_IN_11B, -}; - enum ath9k_tp_scale { ATH9K_TP_SCALE_MAX = 0, ATH9K_TP_SCALE_50, @@ -769,14 +752,11 @@ struct ath9k_node_stats { #define ATH9K_RSSI_EP_MULTIPLIER (1<<7) -enum ath9k_gpio_output_mux_type { - ATH9K_GPIO_OUTPUT_MUX_AS_OUTPUT, - ATH9K_GPIO_OUTPUT_MUX_AS_PCIE_ATTENTION_LED, - ATH9K_GPIO_OUTPUT_MUX_AS_PCIE_POWER_LED, - ATH9K_GPIO_OUTPUT_MUX_AS_MAC_NETWORK_LED, - ATH9K_GPIO_OUTPUT_MUX_AS_MAC_POWER_LED, - ATH9K_GPIO_OUTPUT_MUX_NUM_ENTRIES -}; +#define AR_GPIO_OUTPUT_MUX_AS_OUTPUT 0 +#define AR_GPIO_OUTPUT_MUX_AS_PCIE_ATTENTION_LED 1 +#define AR_GPIO_OUTPUT_MUX_AS_PCIE_POWER_LED 2 +#define AR_GPIO_OUTPUT_MUX_AS_MAC_NETWORK_LED 5 +#define AR_GPIO_OUTPUT_MUX_AS_MAC_POWER_LED 6 enum { ATH9K_RESET_POWER_ON, @@ -790,19 +770,20 @@ struct ath_hal { u32 ah_magic; u16 ah_devid; u16 ah_subvendorid; - struct ath_softc *ah_sc; - void __iomem *ah_sh; - u16 ah_countryCode; u32 ah_macVersion; u16 ah_macRev; u16 ah_phyRev; u16 ah_analog5GhzRev; u16 ah_analog2GhzRev; - u8 ah_decompMask[ATH9K_DECOMP_MASK_SIZE]; - u32 ah_flags; + + void __iomem *ah_sh; + struct ath_softc *ah_sc; enum ath9k_opmode ah_opmode; struct ath9k_ops_config ah_config; struct ath9k_hw_capabilities ah_caps; + + u16 ah_countryCode; + u32 ah_flags; int16_t ah_powerLimit; u16 ah_maxPowerLevel; u32 ah_tpScale; @@ -812,15 +793,16 @@ struct ath_hal { u16 ah_currentRD5G; u16 ah_currentRD2G; char ah_iso[4]; - enum start_adhoc_option ah_adHocMode; - bool ah_commonMode; + struct ath9k_channel ah_channels[150]; - u32 ah_nchan; struct ath9k_channel *ah_curchan; + u32 ah_nchan; + u16 ah_rfsilent; bool ah_rfkillEnabled; bool ah_isPciExpress; u16 ah_txTrigLevel; + #ifndef ATH_NF_PER_CHAN struct ath9k_nfcal_hist nfCalHist[NUM_NF_READINGS]; #endif @@ -853,7 +835,7 @@ bool ath9k_regd_init_channels(struct ath_hal *ah, u32 ath9k_hw_mhz2ieee(struct ath_hal *ah, u32 freq, u32 flags); enum ath9k_int ath9k_hw_set_interrupts(struct ath_hal *ah, enum ath9k_int ints); -bool ath9k_hw_reset(struct ath_hal *ah, enum ath9k_opmode opmode, +bool ath9k_hw_reset(struct ath_hal *ah, struct ath9k_channel *chan, enum ath9k_ht_macmode macmode, u8 txchainmask, u8 rxchainmask, @@ -1018,4 +1000,7 @@ void ath9k_hw_get_channel_centers(struct ath_hal *ah, bool ath9k_get_channel_edges(struct ath_hal *ah, u16 flags, u16 *low, u16 *high); +void ath9k_hw_cfg_output(struct ath_hal *ah, u32 gpio, + u32 ah_signal_type); +void ath9k_hw_set_gpio(struct ath_hal *ah, u32 gpio, u32 value); #endif diff --git a/drivers/net/wireless/ath9k/beacon.c b/drivers/net/wireless/ath9k/beacon.c index caf569401a3..c43fd586116 100644 --- a/drivers/net/wireless/ath9k/beacon.c +++ b/drivers/net/wireless/ath9k/beacon.c @@ -33,7 +33,7 @@ static int ath_beaconq_config(struct ath_softc *sc) struct ath9k_tx_queue_info qi; ath9k_hw_get_txq_props(ah, sc->sc_bhalq, &qi); - if (sc->sc_opmode == ATH9K_M_HOSTAP) { + if (sc->sc_ah->ah_opmode == ATH9K_M_HOSTAP) { /* Always burst out beacon and CAB traffic. */ qi.tqi_aifs = 1; qi.tqi_cwmin = 0; @@ -85,7 +85,7 @@ static void ath_beacon_setup(struct ath_softc *sc, flags = ATH9K_TXDESC_NOACK; - if (sc->sc_opmode == ATH9K_M_IBSS && + if (sc->sc_ah->ah_opmode == ATH9K_M_IBSS && (ah->ah_caps.hw_caps & ATH9K_HW_CAP_VEOL)) { ds->ds_link = bf->bf_daddr; /* self-linked */ flags |= ATH9K_TXDESC_VEOL; @@ -111,24 +111,24 @@ static void ath_beacon_setup(struct ath_softc *sc, rix = 0; rt = sc->sc_currates; rate = rt->info[rix].rateCode; - if (sc->sc_flags & ATH_PREAMBLE_SHORT) + if (sc->sc_flags & SC_OP_PREAMBLE_SHORT) rate |= rt->info[rix].shortPreamble; - ath9k_hw_set11n_txdesc(ah, ds - , skb->len + FCS_LEN /* frame length */ - , ATH9K_PKT_TYPE_BEACON /* Atheros packet type */ - , avp->av_btxctl.txpower /* txpower XXX */ - , ATH9K_TXKEYIX_INVALID /* no encryption */ - , ATH9K_KEY_TYPE_CLEAR /* no encryption */ - , flags /* no ack, veol for beacons */ + ath9k_hw_set11n_txdesc(ah, ds, + skb->len + FCS_LEN, /* frame length */ + ATH9K_PKT_TYPE_BEACON, /* Atheros packet type */ + avp->av_btxctl.txpower, /* txpower XXX */ + ATH9K_TXKEYIX_INVALID, /* no encryption */ + ATH9K_KEY_TYPE_CLEAR, /* no encryption */ + flags /* no ack, veol for beacons */ ); /* NB: beacon's BufLen must be a multiple of 4 bytes */ - ath9k_hw_filltxdesc(ah, ds - , roundup(skb->len, 4) /* buffer length */ - , true /* first segment */ - , true /* last segment */ - , ds /* first descriptor */ + ath9k_hw_filltxdesc(ah, ds, + roundup(skb->len, 4), /* buffer length */ + true, /* first segment */ + true, /* last segment */ + ds /* first descriptor */ ); memzero(series, sizeof(struct ath9k_11n_rate_series) * 4); @@ -140,55 +140,6 @@ static void ath_beacon_setup(struct ath_softc *sc, ctsrate, ctsduration, series, 4, 0); } -/* Move everything from the vap's mcast queue to the hardware cab queue. - * Caller must hold mcasq lock and cabq lock - * XXX MORE_DATA bit? - */ -static void empty_mcastq_into_cabq(struct ath_hal *ah, - struct ath_txq *mcastq, struct ath_txq *cabq) -{ - struct ath_buf *bfmcast; - - BUG_ON(list_empty(&mcastq->axq_q)); - - bfmcast = list_first_entry(&mcastq->axq_q, struct ath_buf, list); - - /* link the descriptors */ - if (!cabq->axq_link) - ath9k_hw_puttxbuf(ah, cabq->axq_qnum, bfmcast->bf_daddr); - else - *cabq->axq_link = bfmcast->bf_daddr; - - /* append the private vap mcast list to the cabq */ - - cabq->axq_depth += mcastq->axq_depth; - cabq->axq_totalqueued += mcastq->axq_totalqueued; - cabq->axq_linkbuf = mcastq->axq_linkbuf; - cabq->axq_link = mcastq->axq_link; - list_splice_tail_init(&mcastq->axq_q, &cabq->axq_q); - mcastq->axq_depth = 0; - mcastq->axq_totalqueued = 0; - mcastq->axq_linkbuf = NULL; - mcastq->axq_link = NULL; -} - -/* This is only run at DTIM. We move everything from the vap's mcast queue - * to the hardware cab queue. Caller must hold the mcastq lock. */ -static void trigger_mcastq(struct ath_hal *ah, - struct ath_txq *mcastq, struct ath_txq *cabq) -{ - spin_lock_bh(&cabq->axq_lock); - - if (!list_empty(&mcastq->axq_q)) - empty_mcastq_into_cabq(ah, mcastq, cabq); - - /* cabq is gated by beacon so it is safe to start here */ - if (!list_empty(&cabq->axq_q)) - ath9k_hw_txstart(ah, cabq->axq_qnum); - - spin_unlock_bh(&cabq->axq_lock); -} - /* * Generate beacon frame and queue cab data for a vap. * @@ -199,19 +150,14 @@ static void trigger_mcastq(struct ath_hal *ah, */ static struct ath_buf *ath_beacon_generate(struct ath_softc *sc, int if_id) { - struct ath_hal *ah = sc->sc_ah; struct ath_buf *bf; struct ath_vap *avp; struct sk_buff *skb; int cabq_depth; - int mcastq_depth; - int is_beacon_dtim = 0; - unsigned int curlen; struct ath_txq *cabq; - struct ath_txq *mcastq; + struct ieee80211_tx_info *info; avp = sc->sc_vaps[if_id]; - mcastq = &avp->av_mcastq; cabq = sc->sc_cabq; ASSERT(avp); @@ -223,32 +169,33 @@ static struct ath_buf *ath_beacon_generate(struct ath_softc *sc, int if_id) } bf = avp->av_bcbuf; skb = (struct sk_buff *) bf->bf_mpdu; + if (skb) { + pci_unmap_single(sc->pdev, bf->bf_dmacontext, + skb_end_pointer(skb) - skb->head, + PCI_DMA_TODEVICE); + } - /* - * Update dynamic beacon contents. If this returns - * non-zero then we need to remap the memory because - * the beacon frame changed size (probably because - * of the TIM bitmap). - */ - curlen = skb->len; - - /* XXX: spin_lock_bh should not be used here, but sparse bitches - * otherwise. We should fix sparse :) */ - spin_lock_bh(&mcastq->axq_lock); - mcastq_depth = avp->av_mcastq.axq_depth; - - if (ath_update_beacon(sc, if_id, &avp->av_boff, skb, mcastq_depth) == - 1) { - ath_skb_unmap_single(sc, skb, PCI_DMA_TODEVICE, - get_dma_mem_context(bf, bf_dmacontext)); - bf->bf_buf_addr = ath_skb_map_single(sc, skb, PCI_DMA_TODEVICE, - get_dma_mem_context(bf, bf_dmacontext)); - } else { - pci_dma_sync_single_for_cpu(sc->pdev, - bf->bf_buf_addr, - skb_tailroom(skb), - PCI_DMA_TODEVICE); + skb = ieee80211_beacon_get(sc->hw, avp->av_if_data); + bf->bf_mpdu = skb; + if (skb == NULL) + return NULL; + info = IEEE80211_SKB_CB(skb); + if (info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ) { + /* + * TODO: make sure the seq# gets assigned properly (vs. other + * TX frames) + */ + struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; + sc->seq_no += 0x10; + hdr->seq_ctrl &= cpu_to_le16(IEEE80211_SCTL_FRAG); + hdr->seq_ctrl |= cpu_to_le16(sc->seq_no); } + bf->bf_buf_addr = bf->bf_dmacontext = + pci_map_single(sc->pdev, skb->data, + skb_end_pointer(skb) - skb->head, + PCI_DMA_TODEVICE); + + skb = ieee80211_get_buffered_bc(sc->hw, avp->av_if_data); /* * if the CABQ traffic from previous DTIM is pending and the current @@ -262,9 +209,7 @@ static struct ath_buf *ath_beacon_generate(struct ath_softc *sc, int if_id) cabq_depth = cabq->axq_depth; spin_unlock_bh(&cabq->axq_lock); - is_beacon_dtim = avp->av_boff.bo_tim[4] & 1; - - if (mcastq_depth && is_beacon_dtim && cabq_depth) { + if (skb && cabq_depth) { /* * Unlock the cabq lock as ath_tx_draintxq acquires * the lock again which is a common function and that @@ -284,10 +229,11 @@ static struct ath_buf *ath_beacon_generate(struct ath_softc *sc, int if_id) * Enable the CAB queue before the beacon queue to * insure cab frames are triggered by this beacon. */ - if (is_beacon_dtim) - trigger_mcastq(ah, mcastq, cabq); + while (skb) { + ath_tx_cabq(sc, skb); + skb = ieee80211_get_buffered_bc(sc->hw, avp->av_if_data); + } - spin_unlock_bh(&mcastq->axq_lock); return bf; } @@ -375,7 +321,7 @@ int ath_beacon_alloc(struct ath_softc *sc, int if_id) struct ath_buf, list); list_del(&avp->av_bcbuf->list); - if (sc->sc_opmode == ATH9K_M_HOSTAP || + if (sc->sc_ah->ah_opmode == ATH9K_M_HOSTAP || !(sc->sc_ah->ah_caps.hw_caps & ATH9K_HW_CAP_VEOL)) { int slot; /* @@ -408,8 +354,9 @@ int ath_beacon_alloc(struct ath_softc *sc, int if_id) bf = avp->av_bcbuf; if (bf->bf_mpdu != NULL) { skb = (struct sk_buff *)bf->bf_mpdu; - ath_skb_unmap_single(sc, skb, PCI_DMA_TODEVICE, - get_dma_mem_context(bf, bf_dmacontext)); + pci_unmap_single(sc->pdev, bf->bf_dmacontext, + skb_end_pointer(skb) - skb->head, + PCI_DMA_TODEVICE); dev_kfree_skb_any(skb); bf->bf_mpdu = NULL; } @@ -418,7 +365,7 @@ int ath_beacon_alloc(struct ath_softc *sc, int if_id) * NB: the beacon data buffer must be 32-bit aligned; * we assume the wbuf routines will return us something * with this alignment (perhaps should assert). - * FIXME: Fill avp->av_boff.bo_tim,avp->av_btxctl.txpower and + * FIXME: Fill avp->av_btxctl.txpower and * avp->av_btxctl.shortPreamble */ skb = ieee80211_beacon_get(sc->hw, avp->av_if_data); @@ -439,9 +386,8 @@ int ath_beacon_alloc(struct ath_softc *sc, int if_id) __le64 val; int intval; - /* FIXME: Use default value for now: Sujith */ - - intval = ATH_DEFAULT_BINTVAL; + intval = sc->hw->conf.beacon_int ? + sc->hw->conf.beacon_int : ATH_DEFAULT_BINTVAL; /* * The beacon interval is in TU's; the TSF in usecs. @@ -466,8 +412,10 @@ int ath_beacon_alloc(struct ath_softc *sc, int if_id) memcpy(&wh[1], &val, sizeof(val)); } - bf->bf_buf_addr = ath_skb_map_single(sc, skb, PCI_DMA_TODEVICE, - get_dma_mem_context(bf, bf_dmacontext)); + bf->bf_buf_addr = bf->bf_dmacontext = + pci_map_single(sc->pdev, skb->data, + skb_end_pointer(skb) - skb->head, + PCI_DMA_TODEVICE); bf->bf_mpdu = skb; return 0; @@ -493,8 +441,9 @@ void ath_beacon_return(struct ath_softc *sc, struct ath_vap *avp) bf = avp->av_bcbuf; if (bf->bf_mpdu != NULL) { struct sk_buff *skb = (struct sk_buff *)bf->bf_mpdu; - ath_skb_unmap_single(sc, skb, PCI_DMA_TODEVICE, - get_dma_mem_context(bf, bf_dmacontext)); + pci_unmap_single(sc->pdev, bf->bf_dmacontext, + skb_end_pointer(skb) - skb->head, + PCI_DMA_TODEVICE); dev_kfree_skb_any(skb); bf->bf_mpdu = NULL; } @@ -505,30 +454,6 @@ void ath_beacon_return(struct ath_softc *sc, struct ath_vap *avp) } /* - * Reclaim beacon resources and return buffer to the pool. - * - * This function will free any wbuf frames that are still attached to the - * beacon buffers in the ATH object. Note that this does not de-allocate - * any wbuf objects that are in the transmit queue and have not yet returned - * to the ATH object. -*/ - -void ath_beacon_free(struct ath_softc *sc) -{ - struct ath_buf *bf; - - list_for_each_entry(bf, &sc->sc_bbuf, list) { - if (bf->bf_mpdu != NULL) { - struct sk_buff *skb = (struct sk_buff *) bf->bf_mpdu; - ath_skb_unmap_single(sc, skb, PCI_DMA_TODEVICE, - get_dma_mem_context(bf, bf_dmacontext)); - dev_kfree_skb_any(skb); - bf->bf_mpdu = NULL; - } - } -} - -/* * Tasklet for Sending Beacons * * Transmit one or more beacon frames at SWBA. Dynamic updates to the frame @@ -540,9 +465,6 @@ void ath_beacon_free(struct ath_softc *sc) void ath9k_beacon_tasklet(unsigned long data) { -#define TSF_TO_TU(_h,_l) \ - ((((u32)(_h)) << 22) | (((u32)(_l)) >> 10)) - struct ath_softc *sc = (struct ath_softc *)data; struct ath_hal *ah = sc->sc_ah; struct ath_buf *bf = NULL; @@ -555,7 +477,7 @@ void ath9k_beacon_tasklet(unsigned long data) u32 tsftu; u16 intval; - if (sc->sc_noreset) { + if (sc->sc_flags & SC_OP_NO_RESET) { show_cycles = ath9k_hw_GetMibCycleCountsPct(ah, &rx_clear, &rx_frame, @@ -577,7 +499,7 @@ void ath9k_beacon_tasklet(unsigned long data) * (in that layer). */ if (sc->sc_bmisscount < BSTUCK_THRESH) { - if (sc->sc_noreset) { + if (sc->sc_flags & SC_OP_NO_RESET) { DPRINTF(sc, ATH_DBG_BEACON, "%s: missed %u consecutive beacons\n", __func__, sc->sc_bmisscount); @@ -605,7 +527,7 @@ void ath9k_beacon_tasklet(unsigned long data) __func__, sc->sc_bmisscount); } } else if (sc->sc_bmisscount >= BSTUCK_THRESH) { - if (sc->sc_noreset) { + if (sc->sc_flags & SC_OP_NO_RESET) { if (sc->sc_bmisscount == BSTUCK_THRESH) { DPRINTF(sc, ATH_DBG_BEACON, @@ -624,7 +546,7 @@ void ath9k_beacon_tasklet(unsigned long data) return; } if (sc->sc_bmisscount != 0) { - if (sc->sc_noreset) { + if (sc->sc_flags & SC_OP_NO_RESET) { DPRINTF(sc, ATH_DBG_BEACON, "%s: resume beacon xmit after %u misses\n", @@ -643,8 +565,8 @@ void ath9k_beacon_tasklet(unsigned long data) * on the tsf to safeguard against missing an swba. */ - /* FIXME: Use default value for now - Sujith */ - intval = ATH_DEFAULT_BINTVAL; + intval = sc->hw->conf.beacon_int ? + sc->hw->conf.beacon_int : ATH_DEFAULT_BINTVAL; tsf = ath9k_hw_gettsf64(ah); tsftu = TSF_TO_TU(tsf>>32, tsf); @@ -704,7 +626,6 @@ void ath9k_beacon_tasklet(unsigned long data) sc->ast_be_xmit += bc; /* XXX per-vap? */ } -#undef TSF_TO_TU } /* @@ -719,7 +640,7 @@ void ath_bstuck_process(struct ath_softc *sc) DPRINTF(sc, ATH_DBG_BEACON, "%s: stuck beacon; resetting (bmiss count %u)\n", __func__, sc->sc_bmisscount); - ath_internal_reset(sc); + ath_reset(sc, false); } /* @@ -740,8 +661,6 @@ void ath_bstuck_process(struct ath_softc *sc) void ath_beacon_config(struct ath_softc *sc, int if_id) { -#define TSF_TO_TU(_h,_l) \ - ((((u32)(_h)) << 22) | (((u32)(_l)) >> 10)) struct ath_hal *ah = sc->sc_ah; u32 nexttbtt, intval; struct ath_beacon_config conf; @@ -750,7 +669,7 @@ void ath_beacon_config(struct ath_softc *sc, int if_id) if (if_id != ATH_IF_ID_ANY) av_opmode = sc->sc_vaps[if_id]->av_opmode; else - av_opmode = sc->sc_opmode; + av_opmode = sc->sc_ah->ah_opmode; memzero(&conf, sizeof(struct ath_beacon_config)); @@ -760,7 +679,8 @@ void ath_beacon_config(struct ath_softc *sc, int if_id) * Protocol stack doesn't support dynamic beacon configuration, * use default configurations. */ - conf.beacon_interval = ATH_DEFAULT_BINTVAL; + conf.beacon_interval = sc->hw->conf.beacon_int ? + sc->hw->conf.beacon_int : ATH_DEFAULT_BINTVAL; conf.listen_interval = 1; conf.dtim_period = conf.beacon_interval; conf.dtim_count = 1; @@ -770,7 +690,7 @@ void ath_beacon_config(struct ath_softc *sc, int if_id) nexttbtt = TSF_TO_TU(get_unaligned_le32(conf.u.last_tstamp + 4), get_unaligned_le32(conf.u.last_tstamp)); /* XXX conditionalize multi-bss support? */ - if (sc->sc_opmode == ATH9K_M_HOSTAP) { + if (sc->sc_ah->ah_opmode == ATH9K_M_HOSTAP) { /* * For multi-bss ap support beacons are either staggered * evenly over N slots or burst together. For the former @@ -791,7 +711,7 @@ void ath_beacon_config(struct ath_softc *sc, int if_id) DPRINTF(sc, ATH_DBG_BEACON, "%s: nexttbtt %u intval %u (%u)\n", __func__, nexttbtt, intval, conf.beacon_interval); /* Check for ATH9K_M_HOSTAP and sc_nostabeacons for WDS client */ - if (sc->sc_opmode == ATH9K_M_STA) { + if (sc->sc_ah->ah_opmode == ATH9K_M_STA) { struct ath9k_beacon_state bs; u64 tsf; u32 tsftu; @@ -886,19 +806,19 @@ void ath_beacon_config(struct ath_softc *sc, int if_id) "cfp:period %u " "maxdur %u " "next %u " - "timoffset %u\n" - , __func__ - , (unsigned long long)tsf, tsftu - , bs.bs_intval - , bs.bs_nexttbtt - , bs.bs_dtimperiod - , bs.bs_nextdtim - , bs.bs_bmissthreshold - , bs.bs_sleepduration - , bs.bs_cfpperiod - , bs.bs_cfpmaxduration - , bs.bs_cfpnext - , bs.bs_timoffset + "timoffset %u\n", + __func__, + (unsigned long long)tsf, tsftu, + bs.bs_intval, + bs.bs_nexttbtt, + bs.bs_dtimperiod, + bs.bs_nextdtim, + bs.bs_bmissthreshold, + bs.bs_sleepduration, + bs.bs_cfpperiod, + bs.bs_cfpmaxduration, + bs.bs_cfpnext, + bs.bs_timoffset ); ath9k_hw_set_interrupts(ah, 0); @@ -911,7 +831,7 @@ void ath_beacon_config(struct ath_softc *sc, int if_id) ath9k_hw_set_interrupts(ah, 0); if (nexttbtt == intval) intval |= ATH9K_BEACON_RESET_TSF; - if (sc->sc_opmode == ATH9K_M_IBSS) { + if (sc->sc_ah->ah_opmode == ATH9K_M_IBSS) { /* * Pull nexttbtt forward to reflect the current * TSF . @@ -943,7 +863,7 @@ void ath_beacon_config(struct ath_softc *sc, int if_id) if (!(ah->ah_caps.hw_caps & ATH9K_HW_CAP_VEOL)) sc->sc_imask |= ATH9K_INT_SWBA; ath_beaconq_config(sc); - } else if (sc->sc_opmode == ATH9K_M_HOSTAP) { + } else if (sc->sc_ah->ah_opmode == ATH9K_M_HOSTAP) { /* * In AP mode we enable the beacon timers and * SWBA interrupts to prepare beacon frames. @@ -959,11 +879,10 @@ void ath_beacon_config(struct ath_softc *sc, int if_id) * When using a self-linked beacon descriptor in * ibss mode load it once here. */ - if (sc->sc_opmode == ATH9K_M_IBSS && + if (sc->sc_ah->ah_opmode == ATH9K_M_IBSS && (ah->ah_caps.hw_caps & ATH9K_HW_CAP_VEOL)) ath_beacon_start_adhoc(sc, 0); } -#undef TSF_TO_TU } /* Function to collect beacon rssi data and resync beacon if necessary */ @@ -975,5 +894,5 @@ void ath_beacon_sync(struct ath_softc *sc, int if_id) * beacon frame we just received. */ ath_beacon_config(sc, if_id); - sc->sc_beacons = 1; + sc->sc_flags |= SC_OP_BEACONS; } diff --git a/drivers/net/wireless/ath9k/core.c b/drivers/net/wireless/ath9k/core.c index f6c45288d0e..c262ef279ff 100644 --- a/drivers/net/wireless/ath9k/core.c +++ b/drivers/net/wireless/ath9k/core.c @@ -21,9 +21,6 @@ static int ath_outdoor; /* enable outdoor use */ -static const u8 ath_bcast_mac[ETH_ALEN] = - { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff }; - static u32 ath_chainmask_sel_up_rssi_thres = ATH_CHAINMASK_SEL_UP_RSSI_THRES; static u32 ath_chainmask_sel_down_rssi_thres = @@ -54,10 +51,8 @@ static void bus_read_cachesize(struct ath_softc *sc, int *csz) * Set current operating mode * * This function initializes and fills the rate table in the ATH object based - * on the operating mode. The blink rates are also set up here, although - * they have been superceeded by the ath_led module. + * on the operating mode. */ - static void ath_setcurmode(struct ath_softc *sc, enum wireless_mode mode) { const struct ath9k_rate_table *rt; @@ -235,7 +230,7 @@ static int ath_setup_channels(struct ath_softc *sc) * Determine mode from channel flags * * This routine will provide the enumerated WIRELESSS_MODE value based - * on the settings of the channel flags. If ho valid set of flags + * on the settings of the channel flags. If no valid set of flags * exist, the lowest mode (11b) is selected. */ @@ -260,7 +255,8 @@ static enum wireless_mode ath_chan2mode(struct ath9k_channel *chan) else if (chan->chanmode == CHANNEL_G_HT40MINUS) return ATH9K_MODE_11NG_HT40MINUS; - /* NB: should not get here */ + WARN_ON(1); /* should not get here */ + return ATH9K_MODE_11B; } @@ -275,14 +271,12 @@ static int ath_stop(struct ath_softc *sc) { struct ath_hal *ah = sc->sc_ah; - DPRINTF(sc, ATH_DBG_CONFIG, "%s: invalid %u\n", - __func__, sc->sc_invalid); + DPRINTF(sc, ATH_DBG_CONFIG, "%s: invalid %ld\n", + __func__, sc->sc_flags & SC_OP_INVALID); /* * Shutdown the hardware and driver: * stop output from above - * reset 802.11 state machine - * (sends station deassoc/deauth frames) * turn off timers * disable interrupts * clear transmit machinery @@ -294,10 +288,10 @@ static int ath_stop(struct ath_softc *sc) * hardware is gone (invalid). */ - if (!sc->sc_invalid) + if (!(sc->sc_flags & SC_OP_INVALID)) ath9k_hw_set_interrupts(ah, 0); ath_draintxq(sc, false); - if (!sc->sc_invalid) { + if (!(sc->sc_flags & SC_OP_INVALID)) { ath_stoprecv(sc); ath9k_hw_phy_disable(ah); } else @@ -307,56 +301,6 @@ static int ath_stop(struct ath_softc *sc) } /* - * Start Scan - * - * This function is called when starting a channel scan. It will perform - * power save wakeup processing, set the filter for the scan, and get the - * chip ready to send broadcast packets out during the scan. -*/ - -void ath_scan_start(struct ath_softc *sc) -{ - struct ath_hal *ah = sc->sc_ah; - u32 rfilt; - u32 now = (u32) jiffies_to_msecs(get_timestamp()); - - sc->sc_scanning = 1; - rfilt = ath_calcrxfilter(sc); - ath9k_hw_setrxfilter(ah, rfilt); - ath9k_hw_write_associd(ah, ath_bcast_mac, 0); - - /* Restore previous power management state. */ - - DPRINTF(sc, ATH_DBG_CONFIG, "%d.%03d | %s: RX filter 0x%x aid 0\n", - now / 1000, now % 1000, __func__, rfilt); -} - -/* - * Scan End - * - * This routine is called by the upper layer when the scan is completed. This - * will set the filters back to normal operating mode, set the BSSID to the - * correct value, and restore the power save state. -*/ - -void ath_scan_end(struct ath_softc *sc) -{ - struct ath_hal *ah = sc->sc_ah; - u32 rfilt; - u32 now = (u32) jiffies_to_msecs(get_timestamp()); - - sc->sc_scanning = 0; - /* Request for a full reset due to rx packet filter changes */ - sc->sc_full_reset = 1; - rfilt = ath_calcrxfilter(sc); - ath9k_hw_setrxfilter(ah, rfilt); - ath9k_hw_write_associd(ah, sc->sc_curbssid, sc->sc_curaid); - - DPRINTF(sc, ATH_DBG_CONFIG, "%d.%03d | %s: RX filter 0x%x aid 0x%x\n", - now / 1000, now % 1000, __func__, rfilt, sc->sc_curaid); -} - -/* * Set the current channel * * Set/change channels. If the channel is really being changed, it's done @@ -367,25 +311,23 @@ int ath_set_channel(struct ath_softc *sc, struct ath9k_channel *hchan) { struct ath_hal *ah = sc->sc_ah; bool fastcc = true, stopped; - enum ath9k_ht_macmode ht_macmode; - if (sc->sc_invalid) /* if the device is invalid or removed */ + if (sc->sc_flags & SC_OP_INVALID) /* the device is invalid or removed */ return -EIO; DPRINTF(sc, ATH_DBG_CONFIG, "%s: %u (%u MHz) -> %u (%u MHz), cflags:%x\n", __func__, - ath9k_hw_mhz2ieee(ah, sc->sc_curchan.channel, - sc->sc_curchan.channelFlags), - sc->sc_curchan.channel, + ath9k_hw_mhz2ieee(ah, sc->sc_ah->ah_curchan->channel, + sc->sc_ah->ah_curchan->channelFlags), + sc->sc_ah->ah_curchan->channel, ath9k_hw_mhz2ieee(ah, hchan->channel, hchan->channelFlags), hchan->channel, hchan->channelFlags); - ht_macmode = ath_cwm_macmode(sc); - - if (hchan->channel != sc->sc_curchan.channel || - hchan->channelFlags != sc->sc_curchan.channelFlags || - sc->sc_update_chainmask || sc->sc_full_reset) { + if (hchan->channel != sc->sc_ah->ah_curchan->channel || + hchan->channelFlags != sc->sc_ah->ah_curchan->channelFlags || + (sc->sc_flags & SC_OP_CHAINMASK_UPDATE) || + (sc->sc_flags & SC_OP_FULL_RESET)) { int status; /* * This is only performed if the channel settings have @@ -404,15 +346,16 @@ int ath_set_channel(struct ath_softc *sc, struct ath9k_channel *hchan) * to flush data frames already in queue because of * changing channel. */ - if (!stopped || sc->sc_full_reset) + if (!stopped || (sc->sc_flags & SC_OP_FULL_RESET)) fastcc = false; spin_lock_bh(&sc->sc_resetlock); - if (!ath9k_hw_reset(ah, sc->sc_opmode, hchan, - ht_macmode, sc->sc_tx_chainmask, - sc->sc_rx_chainmask, - sc->sc_ht_extprotspacing, - fastcc, &status)) { + if (!ath9k_hw_reset(ah, hchan, + sc->sc_ht_info.tx_chan_width, + sc->sc_tx_chainmask, + sc->sc_rx_chainmask, + sc->sc_ht_extprotspacing, + fastcc, &status)) { DPRINTF(sc, ATH_DBG_FATAL, "%s: unable to reset channel %u (%uMhz) " "flags 0x%x hal status %u\n", __func__, @@ -424,9 +367,8 @@ int ath_set_channel(struct ath_softc *sc, struct ath9k_channel *hchan) } spin_unlock_bh(&sc->sc_resetlock); - sc->sc_curchan = *hchan; - sc->sc_update_chainmask = 0; - sc->sc_full_reset = 0; + sc->sc_flags &= ~SC_OP_CHAINMASK_UPDATE; + sc->sc_flags &= ~SC_OP_FULL_RESET; /* Re-enable rx framework */ if (ath_startrecv(sc) != 0) { @@ -537,7 +479,7 @@ int ath_chainmask_sel_logic(struct ath_softc *sc, struct ath_node *an) void ath_update_chainmask(struct ath_softc *sc, int is_ht) { - sc->sc_update_chainmask = 1; + sc->sc_flags |= SC_OP_CHAINMASK_UPDATE; if (is_ht) { sc->sc_tx_chainmask = sc->sc_ah->ah_caps.tx_chainmask; sc->sc_rx_chainmask = sc->sc_ah->ah_caps.rx_chainmask; @@ -554,62 +496,6 @@ void ath_update_chainmask(struct ath_softc *sc, int is_ht) /* VAP management */ /******************/ -/* - * VAP in Listen mode - * - * This routine brings the VAP out of the down state into a "listen" state - * where it waits for association requests. This is used in AP and AdHoc - * modes. -*/ - -int ath_vap_listen(struct ath_softc *sc, int if_id) -{ - struct ath_hal *ah = sc->sc_ah; - struct ath_vap *avp; - u32 rfilt = 0; - DECLARE_MAC_BUF(mac); - - avp = sc->sc_vaps[if_id]; - if (avp == NULL) { - DPRINTF(sc, ATH_DBG_FATAL, "%s: invalid interface id %u\n", - __func__, if_id); - return -EINVAL; - } - -#ifdef CONFIG_SLOW_ANT_DIV - ath_slow_ant_div_stop(&sc->sc_antdiv); -#endif - - /* update ratectrl about the new state */ - ath_rate_newstate(sc, avp); - - rfilt = ath_calcrxfilter(sc); - ath9k_hw_setrxfilter(ah, rfilt); - - if (sc->sc_opmode == ATH9K_M_STA || sc->sc_opmode == ATH9K_M_IBSS) { - memcpy(sc->sc_curbssid, ath_bcast_mac, ETH_ALEN); - ath9k_hw_write_associd(ah, sc->sc_curbssid, sc->sc_curaid); - } else - sc->sc_curaid = 0; - - DPRINTF(sc, ATH_DBG_CONFIG, - "%s: RX filter 0x%x bssid %s aid 0x%x\n", - __func__, rfilt, print_mac(mac, - sc->sc_curbssid), sc->sc_curaid); - - /* - * XXXX - * Disable BMISS interrupt when we're not associated - */ - ath9k_hw_set_interrupts(ah, - sc->sc_imask & ~(ATH9K_INT_SWBA | ATH9K_INT_BMISS)); - sc->sc_imask &= ~(ATH9K_INT_SWBA | ATH9K_INT_BMISS); - /* need to reconfigure the beacons when it moves to RUN */ - sc->sc_beacons = 0; - - return 0; -} - int ath_vap_attach(struct ath_softc *sc, int if_id, struct ieee80211_vif *if_data, @@ -647,16 +533,13 @@ int ath_vap_attach(struct ath_softc *sc, /* Set the VAP opmode */ avp->av_opmode = opmode; avp->av_bslot = -1; - INIT_LIST_HEAD(&avp->av_mcastq.axq_q); - INIT_LIST_HEAD(&avp->av_mcastq.axq_acq); - spin_lock_init(&avp->av_mcastq.axq_lock); ath9k_hw_set_tsfadjust(sc->sc_ah, 1); sc->sc_vaps[if_id] = avp; sc->sc_nvaps++; /* Set the device opmode */ - sc->sc_opmode = opmode; + sc->sc_ah->ah_opmode = opmode; /* default VAP configuration */ avp->av_config.av_fixed_rateset = IEEE80211_FIXED_RATE_NONE; @@ -689,9 +572,6 @@ int ath_vap_detach(struct ath_softc *sc, int if_id) ath_stoprecv(sc); /* stop recv side */ ath_flushrecv(sc); /* flush recv queue */ - /* Reclaim any pending mcast bufs on the vap. */ - ath_tx_draintxq(sc, &avp->av_mcastq, false); - kfree(avp); sc->sc_vaps[if_id] = NULL; sc->sc_nvaps--; @@ -728,9 +608,9 @@ int ath_open(struct ath_softc *sc, struct ath9k_channel *initial_chan) struct ath_hal *ah = sc->sc_ah; int status; int error = 0; - enum ath9k_ht_macmode ht_macmode = ath_cwm_macmode(sc); - DPRINTF(sc, ATH_DBG_CONFIG, "%s: mode %d\n", __func__, sc->sc_opmode); + DPRINTF(sc, ATH_DBG_CONFIG, "%s: mode %d\n", + __func__, sc->sc_ah->ah_opmode); /* * Stop anything previously setup. This is safe @@ -752,16 +632,16 @@ int ath_open(struct ath_softc *sc, struct ath9k_channel *initial_chan) * be followed by initialization of the appropriate bits * and then setup of the interrupt mask. */ - sc->sc_curchan = *initial_chan; spin_lock_bh(&sc->sc_resetlock); - if (!ath9k_hw_reset(ah, sc->sc_opmode, &sc->sc_curchan, ht_macmode, - sc->sc_tx_chainmask, sc->sc_rx_chainmask, - sc->sc_ht_extprotspacing, false, &status)) { + if (!ath9k_hw_reset(ah, initial_chan, + sc->sc_ht_info.tx_chan_width, + sc->sc_tx_chainmask, sc->sc_rx_chainmask, + sc->sc_ht_extprotspacing, false, &status)) { DPRINTF(sc, ATH_DBG_FATAL, "%s: unable to reset hardware; hal status %u " "(freq %u flags 0x%x)\n", __func__, status, - sc->sc_curchan.channel, sc->sc_curchan.channelFlags); + initial_chan->channel, initial_chan->channelFlags); error = -EIO; spin_unlock_bh(&sc->sc_resetlock); goto done; @@ -802,7 +682,8 @@ int ath_open(struct ath_softc *sc, struct ath9k_channel *initial_chan) * Note we only do this (at the moment) for station mode. */ if (ath9k_hw_phycounters(ah) && - ((sc->sc_opmode == ATH9K_M_STA) || (sc->sc_opmode == ATH9K_M_IBSS))) + ((sc->sc_ah->ah_opmode == ATH9K_M_STA) || + (sc->sc_ah->ah_opmode == ATH9K_M_IBSS))) sc->sc_imask |= ATH9K_INT_MIB; /* * Some hardware processes the TIM IE and fires an @@ -811,7 +692,7 @@ int ath_open(struct ath_softc *sc, struct ath9k_channel *initial_chan) * enable the TIM interrupt when operating as station. */ if ((ah->ah_caps.hw_caps & ATH9K_HW_CAP_ENHANCEDPM) && - (sc->sc_opmode == ATH9K_M_STA) && + (sc->sc_ah->ah_opmode == ATH9K_M_STA) && !sc->sc_config.swBeaconProcess) sc->sc_imask |= ATH9K_INT_TIM; /* @@ -823,34 +704,34 @@ int ath_open(struct ath_softc *sc, struct ath9k_channel *initial_chan) /* XXX: we must make sure h/w is ready and clear invalid flag * before turning on interrupt. */ - sc->sc_invalid = 0; + sc->sc_flags &= ~SC_OP_INVALID; done: return error; } -/* - * Reset the hardware w/o losing operational state. This is - * basically a more efficient way of doing ath_stop, ath_init, - * followed by state transitions to the current 802.11 - * operational state. Used to recover from errors rx overrun - * and to reset the hardware when rf gain settings must be reset. - */ - -static int ath_reset_start(struct ath_softc *sc, u32 flag) +int ath_reset(struct ath_softc *sc, bool retry_tx) { struct ath_hal *ah = sc->sc_ah; + int status; + int error = 0; ath9k_hw_set_interrupts(ah, 0); /* disable interrupts */ - ath_draintxq(sc, flag & RESET_RETRY_TXQ); /* stop xmit side */ - ath_stoprecv(sc); /* stop recv side */ - ath_flushrecv(sc); /* flush recv queue */ + ath_draintxq(sc, retry_tx); /* stop xmit */ + ath_stoprecv(sc); /* stop recv */ + ath_flushrecv(sc); /* flush recv queue */ - return 0; -} - -static int ath_reset_end(struct ath_softc *sc, u32 flag) -{ - struct ath_hal *ah = sc->sc_ah; + /* Reset chip */ + spin_lock_bh(&sc->sc_resetlock); + if (!ath9k_hw_reset(ah, sc->sc_ah->ah_curchan, + sc->sc_ht_info.tx_chan_width, + sc->sc_tx_chainmask, sc->sc_rx_chainmask, + sc->sc_ht_extprotspacing, false, &status)) { + DPRINTF(sc, ATH_DBG_FATAL, + "%s: unable to reset hardware; hal status %u\n", + __func__, status); + error = -EIO; + } + spin_unlock_bh(&sc->sc_resetlock); if (ath_startrecv(sc) != 0) /* restart recv */ DPRINTF(sc, ATH_DBG_FATAL, @@ -861,16 +742,17 @@ static int ath_reset_end(struct ath_softc *sc, u32 flag) * that changes the channel so update any state that * might change as a result. */ - ath_setcurmode(sc, ath_chan2mode(&sc->sc_curchan)); + ath_setcurmode(sc, ath_chan2mode(sc->sc_ah->ah_curchan)); - ath_update_txpow(sc); /* update tx power state */ + ath_update_txpow(sc); - if (sc->sc_beacons) + if (sc->sc_flags & SC_OP_BEACONS) ath_beacon_config(sc, ATH_IF_ID_ANY); /* restart beacons */ + ath9k_hw_set_interrupts(ah, sc->sc_imask); /* Restart the txq */ - if (flag & RESET_RETRY_TXQ) { + if (retry_tx) { int i; for (i = 0; i < ATH9K_NUM_TX_QUEUES; i++) { if (ATH_TXQ_SETUP(sc, i)) { @@ -880,28 +762,6 @@ static int ath_reset_end(struct ath_softc *sc, u32 flag) } } } - return 0; -} - -int ath_reset(struct ath_softc *sc) -{ - struct ath_hal *ah = sc->sc_ah; - int status; - int error = 0; - enum ath9k_ht_macmode ht_macmode = ath_cwm_macmode(sc); - - /* NB: indicate channel change so we do a full reset */ - spin_lock_bh(&sc->sc_resetlock); - if (!ath9k_hw_reset(ah, sc->sc_opmode, &sc->sc_curchan, - ht_macmode, - sc->sc_tx_chainmask, sc->sc_rx_chainmask, - sc->sc_ht_extprotspacing, false, &status)) { - DPRINTF(sc, ATH_DBG_FATAL, - "%s: unable to reset hardware; hal status %u\n", - __func__, status); - error = -EIO; - } - spin_unlock_bh(&sc->sc_resetlock); return error; } @@ -911,7 +771,7 @@ int ath_suspend(struct ath_softc *sc) struct ath_hal *ah = sc->sc_ah; /* No I/O if device has been surprise removed */ - if (sc->sc_invalid) + if (sc->sc_flags & SC_OP_INVALID) return -EIO; /* Shut off the interrupt before setting sc->sc_invalid to '1' */ @@ -919,7 +779,7 @@ int ath_suspend(struct ath_softc *sc) /* XXX: we must make sure h/w will not generate any interrupt * before setting the invalid flag. */ - sc->sc_invalid = 1; + sc->sc_flags |= SC_OP_INVALID; /* disable HAL and put h/w to sleep */ ath9k_hw_disable(sc->sc_ah); @@ -940,7 +800,7 @@ irqreturn_t ath_isr(int irq, void *dev) bool sched = false; do { - if (sc->sc_invalid) { + if (sc->sc_flags & SC_OP_INVALID) { /* * The hardware is not ready/present, don't * touch anything. Note this can happen early @@ -1050,7 +910,7 @@ static void ath9k_tasklet(unsigned long data) if (status & ATH9K_INT_FATAL) { /* need a chip reset */ - ath_internal_reset(sc); + ath_reset(sc, false); return; } else { @@ -1093,10 +953,9 @@ int ath_init(u16 devid, struct ath_softc *sc) int status; int error = 0, i; int csz = 0; - u32 rd; /* XXX: hardware will not be ready until ath_open() being called */ - sc->sc_invalid = 1; + sc->sc_flags |= SC_OP_INVALID; sc->sc_debug = DBG_DEFAULT; DPRINTF(sc, ATH_DBG_CONFIG, "%s: devid 0x%x\n", __func__, devid); @@ -1126,9 +985,6 @@ int ath_init(u16 devid, struct ath_softc *sc) } sc->sc_ah = ah; - /* Get the chipset-specific aggr limit. */ - sc->sc_rtsaggrlimit = ah->ah_caps.rts_aggr_limit; - /* Get the hardware key cache size. */ sc->sc_keymax = ah->ah_caps.keycache_size; if (sc->sc_keymax > ATH_KEYMAX) { @@ -1162,14 +1018,12 @@ int ath_init(u16 devid, struct ath_softc *sc) * is resposible for filtering this list based on settings * like the phy mode. */ - rd = ah->ah_currentRD; - error = ath_setup_channels(sc); if (error) goto bad; /* default to STA mode */ - sc->sc_opmode = ATH9K_M_MONITOR; + sc->sc_ah->ah_opmode = ATH9K_M_MONITOR; /* Setup rate tables */ @@ -1240,7 +1094,7 @@ int ath_init(u16 devid, struct ath_softc *sc) sc->sc_rc = ath_rate_attach(ah); if (sc->sc_rc == NULL) { - error = EIO; + error = -EIO; goto bad2; } @@ -1280,20 +1134,13 @@ int ath_init(u16 devid, struct ath_softc *sc) /* 11n Capabilities */ if (ah->ah_caps.hw_caps & ATH9K_HW_CAP_HT) { - sc->sc_txaggr = 1; - sc->sc_rxaggr = 1; + sc->sc_flags |= SC_OP_TXAGGR; + sc->sc_flags |= SC_OP_RXAGGR; } sc->sc_tx_chainmask = ah->ah_caps.tx_chainmask; sc->sc_rx_chainmask = ah->ah_caps.rx_chainmask; - /* Configuration for rx chain detection */ - sc->sc_rxchaindetect_ref = 0; - sc->sc_rxchaindetect_thresh5GHz = 35; - sc->sc_rxchaindetect_thresh2GHz = 35; - sc->sc_rxchaindetect_delta5GHz = 30; - sc->sc_rxchaindetect_delta2GHz = 30; - ath9k_hw_setcapability(ah, ATH9K_CAP_DIVERSITY, 1, true, NULL); sc->sc_defant = ath9k_hw_getdefantenna(ah); @@ -1337,7 +1184,7 @@ void ath_deinit(struct ath_softc *sc) DPRINTF(sc, ATH_DBG_CONFIG, "%s\n", __func__); ath_stop(sc); - if (!sc->sc_invalid) + if (!(sc->sc_flags & SC_OP_INVALID)) ath9k_hw_setpower(sc->sc_ah, ATH9K_PM_AWAKE); ath_rate_detach(sc->sc_rc); /* cleanup tx queues */ @@ -1464,9 +1311,9 @@ void ath_newassoc(struct ath_softc *sc, /* if station reassociates, tear down the aggregation state. */ if (!isnew) { for (tidno = 0; tidno < WME_NUM_TID; tidno++) { - if (sc->sc_txaggr) + if (sc->sc_flags & SC_OP_TXAGGR) ath_tx_aggr_teardown(sc, an, tidno); - if (sc->sc_rxaggr) + if (sc->sc_flags & SC_OP_RXAGGR) ath_rx_aggr_teardown(sc, an, tidno); } } @@ -1815,13 +1662,6 @@ void ath_descdma_cleanup(struct ath_softc *sc, /* Utilities */ /*************/ -void ath_internal_reset(struct ath_softc *sc) -{ - ath_reset_start(sc, 0); - ath_reset(sc); - ath_reset_end(sc, 0); -} - int ath_get_hal_qnum(u16 queue, struct ath_softc *sc) { int qnum; diff --git a/drivers/net/wireless/ath9k/core.h b/drivers/net/wireless/ath9k/core.h index 673b3d81133..1faa1effa02 100644 --- a/drivers/net/wireless/ath9k/core.h +++ b/drivers/net/wireless/ath9k/core.h @@ -39,6 +39,7 @@ #include <linux/scatterlist.h> #include <asm/page.h> #include <net/mac80211.h> +#include <linux/leds.h> #include "ath9k.h" #include "rc.h" @@ -79,12 +80,12 @@ struct ath_node; } \ } while (0) +#define TSF_TO_TU(_h,_l) \ + ((((u32)(_h)) << 22) | (((u32)(_l)) >> 10)) + /* XXX: remove */ #define memzero(_buf, _len) memset(_buf, 0, _len) -#define get_dma_mem_context(var, field) (&((var)->field)) -#define copy_dma_mem_context(dst, src) (*dst = *src) - #define ATH9K_BH_STATUS_INTACT 0 #define ATH9K_BH_STATUS_CHANGE 1 @@ -95,6 +96,8 @@ static inline unsigned long get_timestamp(void) return ((jiffies / HZ) * 1000) + (jiffies % HZ) * (1000 / HZ); } +static const u8 ath_bcast_mac[ETH_ALEN] = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff}; + /*************/ /* Debugging */ /*************/ @@ -175,11 +178,6 @@ void ath_update_chainmask(struct ath_softc *sc, int is_ht); /* Descriptor Management */ /*************************/ -/* Number of descriptors per buffer. The only case where we see skbuff -chains is due to FF aggregation in the driver. */ -#define ATH_TXDESC 1 -/* if there's more fragment for this MSDU */ -#define ATH_BF_MORE_MPDU 1 #define ATH_TXBUF_RESET(_bf) do { \ (_bf)->bf_status = 0; \ (_bf)->bf_lastbf = NULL; \ @@ -189,28 +187,29 @@ chains is due to FF aggregation in the driver. */ sizeof(struct ath_buf_state)); \ } while (0) +enum buffer_type { + BUF_DATA = BIT(0), + BUF_AGGR = BIT(1), + BUF_AMPDU = BIT(2), + BUF_HT = BIT(3), + BUF_RETRY = BIT(4), + BUF_XRETRY = BIT(5), + BUF_SHORT_PREAMBLE = BIT(6), + BUF_BAR = BIT(7), + BUF_PSPOLL = BIT(8), + BUF_AGGR_BURST = BIT(9), + BUF_CALC_AIRTIME = BIT(10), +}; + struct ath_buf_state { - int bfs_nframes; /* # frames in aggregate */ - u16 bfs_al; /* length of aggregate */ - u16 bfs_frmlen; /* length of frame */ - int bfs_seqno; /* sequence number */ - int bfs_tidno; /* tid of this frame */ - int bfs_retries; /* current retries */ + int bfs_nframes; /* # frames in aggregate */ + u16 bfs_al; /* length of aggregate */ + u16 bfs_frmlen; /* length of frame */ + int bfs_seqno; /* sequence number */ + int bfs_tidno; /* tid of this frame */ + int bfs_retries; /* current retries */ struct ath_rc_series bfs_rcs[4]; /* rate series */ - u8 bfs_isdata:1; /* is a data frame/aggregate */ - u8 bfs_isaggr:1; /* is an aggregate */ - u8 bfs_isampdu:1; /* is an a-mpdu, aggregate or not */ - u8 bfs_ht:1; /* is an HT frame */ - u8 bfs_isretried:1; /* is retried */ - u8 bfs_isxretried:1; /* is excessive retried */ - u8 bfs_shpreamble:1; /* is short preamble */ - u8 bfs_isbar:1; /* is a BAR */ - u8 bfs_ispspoll:1; /* is a PS-Poll */ - u8 bfs_aggrburst:1; /* is a aggr burst */ - u8 bfs_calcairtime:1; /* requests airtime be calculated - when set for tx frame */ - int bfs_rifsburst_elem; /* RIFS burst/bar */ - int bfs_nrifsubframes; /* # of elements in burst */ + u32 bf_type; /* BUF_* (enum buffer_type) */ /* key type use to encrypt this frame */ enum ath9k_key_type bfs_keytype; }; @@ -222,26 +221,22 @@ struct ath_buf_state { #define bf_seqno bf_state.bfs_seqno #define bf_tidno bf_state.bfs_tidno #define bf_rcs bf_state.bfs_rcs -#define bf_isdata bf_state.bfs_isdata -#define bf_isaggr bf_state.bfs_isaggr -#define bf_isampdu bf_state.bfs_isampdu -#define bf_ht bf_state.bfs_ht -#define bf_isretried bf_state.bfs_isretried -#define bf_isxretried bf_state.bfs_isxretried -#define bf_shpreamble bf_state.bfs_shpreamble -#define bf_rifsburst_elem bf_state.bfs_rifsburst_elem -#define bf_nrifsubframes bf_state.bfs_nrifsubframes #define bf_keytype bf_state.bfs_keytype -#define bf_isbar bf_state.bfs_isbar -#define bf_ispspoll bf_state.bfs_ispspoll -#define bf_aggrburst bf_state.bfs_aggrburst -#define bf_calcairtime bf_state.bfs_calcairtime +#define bf_isdata(bf) (bf->bf_state.bf_type & BUF_DATA) +#define bf_isaggr(bf) (bf->bf_state.bf_type & BUF_AGGR) +#define bf_isampdu(bf) (bf->bf_state.bf_type & BUF_AMPDU) +#define bf_isht(bf) (bf->bf_state.bf_type & BUF_HT) +#define bf_isretried(bf) (bf->bf_state.bf_type & BUF_RETRY) +#define bf_isxretried(bf) (bf->bf_state.bf_type & BUF_XRETRY) +#define bf_isshpreamble(bf) (bf->bf_state.bf_type & BUF_SHORT_PREAMBLE) +#define bf_isbar(bf) (bf->bf_state.bf_type & BUF_BAR) +#define bf_ispspoll(bf) (bf->bf_state.bf_type & BUF_PSPOLL) +#define bf_isaggrburst(bf) (bf->bf_state.bf_type & BUF_AGGR_BURST) /* * Abstraction of a contiguous buffer to transmit/receive. There is only * a single hw descriptor encapsulated here. */ - struct ath_buf { struct list_head list; struct list_head *last; @@ -391,10 +386,10 @@ int ath_rx_input(struct ath_softc *sc, struct sk_buff *skb, struct ath_recv_status *rx_status, enum ATH_RX_TYPE *status); -int ath__rx_indicate(struct ath_softc *sc, - struct sk_buff *skb, - struct ath_recv_status *status, - u16 keyix); +int _ath_rx_indicate(struct ath_softc *sc, + struct sk_buff *skb, + struct ath_recv_status *status, + u16 keyix); int ath_rx_subframe(struct ath_node *an, struct sk_buff *skb, struct ath_recv_status *status); @@ -402,8 +397,7 @@ int ath_rx_subframe(struct ath_node *an, struct sk_buff *skb, /* TX */ /******/ -#define ATH_FRAG_PER_MSDU 1 -#define ATH_TXBUF (512/ATH_FRAG_PER_MSDU) +#define ATH_TXBUF 512 /* max number of transmit attempts (tries) */ #define ATH_TXMAXTRY 13 /* max number of 11n transmit attempts (tries) */ @@ -522,7 +516,6 @@ struct ath_tx_control { u32 keyix; int min_rate; int mcast_rate; - u16 nextfraglen; struct ath_softc *dev; dma_addr_t dmacontext; }; @@ -557,10 +550,10 @@ void ath_tx_cleanupq(struct ath_softc *sc, struct ath_txq *txq); int ath_tx_setup(struct ath_softc *sc, int haltype); void ath_draintxq(struct ath_softc *sc, bool retry_tx); void ath_tx_draintxq(struct ath_softc *sc, - struct ath_txq *txq, bool retry_tx); + struct ath_txq *txq, bool retry_tx); void ath_tx_node_init(struct ath_softc *sc, struct ath_node *an); void ath_tx_node_cleanup(struct ath_softc *sc, - struct ath_node *an, bool bh_flag); + struct ath_node *an, bool bh_flag); void ath_tx_node_free(struct ath_softc *sc, struct ath_node *an); void ath_txq_schedule(struct ath_softc *sc, struct ath_txq *txq); int ath_tx_init(struct ath_softc *sc, int nbufs); @@ -575,6 +568,7 @@ u32 ath_txq_aggr_depth(struct ath_softc *sc, int qnum); void ath_notify_txq_status(struct ath_softc *sc, u16 queue_depth); void ath_tx_complete(struct ath_softc *sc, struct sk_buff *skb, struct ath_xmit_status *tx_status, struct ath_node *an); +void ath_tx_cabq(struct ath_softc *sc, struct sk_buff *skb); /**********************/ /* Node / Aggregation */ @@ -585,7 +579,6 @@ void ath_tx_complete(struct ath_softc *sc, struct sk_buff *skb, /* indicates the node is 80211 power save */ #define ATH_NODE_PWRSAVE 0x2 -#define ADDBA_TIMEOUT 200 /* 200 milliseconds */ #define ADDBA_EXCHANGE_ATTEMPTS 10 #define ATH_AGGR_DELIM_SZ 4 /* delimiter size */ #define ATH_AGGR_MINPLEN 256 /* in bytes, minimum packet length */ @@ -705,9 +698,6 @@ struct ath_node *ath_node_find(struct ath_softc *sc, u8 *addr); #define ATH_BCBUF 4 /* number of beacon buffers */ #define ATH_DEFAULT_BINTVAL 100 /* default beacon interval in TU */ #define ATH_DEFAULT_BMISS_LIMIT 10 -#define ATH_BEACON_AIFS_DEFAULT 0 /* Default aifs for ap beacon q */ -#define ATH_BEACON_CWMIN_DEFAULT 0 /* Default cwmin for ap beacon q */ -#define ATH_BEACON_CWMAX_DEFAULT 0 /* Default cwmax for ap beacon q */ #define IEEE80211_MS_TO_TU(x) (((x) * 1000) / 1024) /* beacon configuration */ @@ -724,30 +714,16 @@ struct ath_beacon_config { } u; /* last received beacon/probe response timestamp of this BSS. */ }; -/* offsets in a beacon frame for - * quick acess of beacon content by low-level driver */ -struct ath_beacon_offset { - u8 *bo_tim; /* start of atim/dtim */ -}; - void ath9k_beacon_tasklet(unsigned long data); void ath_beacon_config(struct ath_softc *sc, int if_id); int ath_beaconq_setup(struct ath_hal *ah); int ath_beacon_alloc(struct ath_softc *sc, int if_id); void ath_bstuck_process(struct ath_softc *sc); -void ath_beacon_tasklet(struct ath_softc *sc, int *needmark); -void ath_beacon_free(struct ath_softc *sc); void ath_beacon_return(struct ath_softc *sc, struct ath_vap *avp); void ath_beacon_sync(struct ath_softc *sc, int if_id); -void ath_update_beacon_info(struct ath_softc *sc, int avgbrssi); void ath_get_beaconconfig(struct ath_softc *sc, int if_id, struct ath_beacon_config *conf); -int ath_update_beacon(struct ath_softc *sc, - int if_id, - struct ath_beacon_offset *bo, - struct sk_buff *skb, - int mcast); /********/ /* VAPs */ /********/ @@ -774,10 +750,8 @@ struct ath_vap { struct ieee80211_vif *av_if_data; enum ath9k_opmode av_opmode; /* VAP operational mode */ struct ath_buf *av_bcbuf; /* beacon buffer */ - struct ath_beacon_offset av_boff; /* dynamic update state */ struct ath_tx_control av_btxctl; /* txctl information for beacon */ int av_bslot; /* beacon slot index */ - struct ath_txq av_mcastq; /* multicast transmit queue */ struct ath_vap_config av_config;/* vap configuration parameters*/ struct ath_rate_node *rc_node; }; @@ -788,8 +762,7 @@ int ath_vap_attach(struct ath_softc *sc, enum ath9k_opmode opmode); int ath_vap_detach(struct ath_softc *sc, int if_id); int ath_vap_config(struct ath_softc *sc, - int if_id, struct ath_vap_config *if_config); -int ath_vap_listen(struct ath_softc *sc, int if_id); + int if_id, struct ath_vap_config *if_config); /*********************/ /* Antenna diversity */ @@ -830,6 +803,27 @@ void ath_slow_ant_div(struct ath_antdiv *antdiv, void ath_setdefantenna(void *sc, u32 antenna); /********************/ +/* LED Control */ +/********************/ + +#define ATH_LED_PIN 1 + +enum ath_led_type { + ATH_LED_RADIO, + ATH_LED_ASSOC, + ATH_LED_TX, + ATH_LED_RX +}; + +struct ath_led { + struct ath_softc *sc; + struct led_classdev led_cdev; + enum ath_led_type led_type; + char name[32]; + bool registered; +}; + +/********************/ /* Main driver core */ /********************/ @@ -841,11 +835,7 @@ void ath_setdefantenna(void *sc, u32 antenna); #define ATH_DEFAULT_NOISE_FLOOR -95 #define ATH_REGCLASSIDS_MAX 10 #define ATH_CABQ_READY_TIME 80 /* % of beacon interval */ -#define ATH_PREAMBLE_SHORT (1<<0) -#define ATH_PROTECT_ENABLE (1<<1) #define ATH_MAX_SW_RETRIES 10 -/* Num farmes difference in tx to flip default recv */ -#define ATH_ANTENNA_DIFF 2 #define ATH_CHAN_MAX 255 #define IEEE80211_WEP_NKID 4 /* number of key ids */ #define IEEE80211_RATE_VAL 0x7f @@ -859,9 +849,7 @@ void ath_setdefantenna(void *sc, u32 antenna); */ #define ATH_KEYMAX 128 /* max key cache size we handle */ -#define RESET_RETRY_TXQ 0x00000001 #define ATH_IF_ID_ANY 0xff - #define ATH_TXPOWER_MAX 100 /* .5 dBm units */ #define RSSI_LPF_THRESHOLD -20 @@ -907,60 +895,61 @@ struct ath_ht_info { u8 ext_chan_offset; }; +#define SC_OP_INVALID BIT(0) +#define SC_OP_BEACONS BIT(1) +#define SC_OP_RXAGGR BIT(2) +#define SC_OP_TXAGGR BIT(3) +#define SC_OP_CHAINMASK_UPDATE BIT(4) +#define SC_OP_FULL_RESET BIT(5) +#define SC_OP_NO_RESET BIT(6) +#define SC_OP_PREAMBLE_SHORT BIT(7) +#define SC_OP_PROTECT_ENABLE BIT(8) +#define SC_OP_RXFLUSH BIT(9) +#define SC_OP_LED_ASSOCIATED BIT(10) + struct ath_softc { struct ieee80211_hw *hw; struct pci_dev *pdev; - void __iomem *mem; struct tasklet_struct intr_tq; struct tasklet_struct bcon_tasklet; - struct ath_config sc_config; /* load-time parameters */ - int sc_debug; + struct ath_config sc_config; struct ath_hal *sc_ah; - struct ath_rate_softc *sc_rc; /* tx rate control support */ + struct ath_rate_softc *sc_rc; + void __iomem *mem; + + u8 sc_curbssid[ETH_ALEN]; + u8 sc_myaddr[ETH_ALEN]; + u8 sc_bssidmask[ETH_ALEN]; + + int sc_debug; u32 sc_intrstatus; - enum ath9k_opmode sc_opmode; /* current operating mode */ - - u8 sc_invalid; /* being detached */ - u8 sc_beacons; /* beacons running */ - u8 sc_scanning; /* scanning active */ - u8 sc_txaggr; /* enable 11n tx aggregation */ - u8 sc_rxaggr; /* enable 11n rx aggregation */ - u8 sc_update_chainmask; /* change chain mask */ - u8 sc_full_reset; /* force full reset */ - enum wireless_mode sc_curmode; /* current phy mode */ + u32 sc_flags; /* SC_OP_* */ + unsigned int rx_filter; u16 sc_curtxpow; u16 sc_curaid; - u8 sc_curbssid[ETH_ALEN]; - u8 sc_myaddr[ETH_ALEN]; + u16 sc_cachelsz; + int sc_slotupdate; /* slot to next advance fsm */ + int sc_slottime; + int sc_bslot[ATH_BCBUF]; + u8 sc_tx_chainmask; + u8 sc_rx_chainmask; + enum ath9k_int sc_imask; + enum wireless_mode sc_curmode; /* current phy mode */ enum PROT_MODE sc_protmode; - u8 sc_mcastantenna; - u8 sc_txantenna; /* data tx antenna (fixed or auto) */ + u8 sc_nbcnvaps; /* # of vaps sending beacons */ u16 sc_nvaps; /* # of active virtual ap's */ struct ath_vap *sc_vaps[ATH_BCBUF]; - enum ath9k_int sc_imask; - u8 sc_bssidmask[ETH_ALEN]; + + u8 sc_mcastantenna; u8 sc_defant; /* current default antenna */ u8 sc_rxotherant; /* rx's on non-default antenna */ - u16 sc_cachelsz; - int sc_slotupdate; /* slot to next advance fsm */ - int sc_slottime; - u8 sc_noreset; - int sc_bslot[ATH_BCBUF]; + struct ath9k_node_stats sc_halstats; /* station-mode rssi stats */ struct list_head node_list; struct ath_ht_info sc_ht_info; - int16_t sc_noise_floor; /* signal noise floor in dBm */ enum ath9k_ht_extprotspacing sc_ht_extprotspacing; - u8 sc_tx_chainmask; - u8 sc_rx_chainmask; - u8 sc_rxchaindetect_ref; - u8 sc_rxchaindetect_thresh5GHz; - u8 sc_rxchaindetect_thresh2GHz; - u8 sc_rxchaindetect_delta5GHz; - u8 sc_rxchaindetect_delta2GHz; - u32 sc_rtsaggrlimit; /* Chipset specific aggr limit */ - u32 sc_flags; + #ifdef CONFIG_SLOW_ANT_DIV struct ath_antdiv sc_antdiv; #endif @@ -981,8 +970,6 @@ struct ath_softc { struct ath_descdma sc_rxdma; int sc_rxbufsize; /* rx size based on mtu */ u32 *sc_rxlink; /* link ptr in last RX desc */ - u32 sc_rxflush; /* rx flush in progress */ - u64 sc_lastrx; /* tsf of last rx'd frame */ /* TX */ struct list_head sc_txbuf; @@ -991,7 +978,7 @@ struct ath_softc { u32 sc_txqsetup; u32 sc_txintrperiod; /* tx interrupt batching */ int sc_haltype2q[ATH9K_WME_AC_VO+1]; /* HAL WME AC -> h/w qnum */ - u32 sc_ant_tx[8]; /* recent tx frames/antenna */ + u16 seq_no; /* TX sequence number */ /* Beacon */ struct ath9k_tx_queue_info sc_beacon_qi; @@ -1015,7 +1002,6 @@ struct ath_softc { /* Channel, Band */ struct ieee80211_channel channels[IEEE80211_NUM_BANDS][ATH_CHAN_MAX]; struct ieee80211_supported_band sbands[IEEE80211_NUM_BANDS]; - struct ath9k_channel sc_curchan; /* Locks */ spinlock_t sc_rxflushlock; @@ -1023,6 +1009,12 @@ struct ath_softc { spinlock_t sc_txbuflock; spinlock_t sc_resetlock; spinlock_t node_lock; + + /* LEDs */ + struct ath_led radio_led; + struct ath_led assoc_led; + struct ath_led tx_led; + struct ath_led rx_led; }; int ath_init(u16 devid, struct ath_softc *sc); @@ -1030,14 +1022,8 @@ void ath_deinit(struct ath_softc *sc); int ath_open(struct ath_softc *sc, struct ath9k_channel *initial_chan); int ath_suspend(struct ath_softc *sc); irqreturn_t ath_isr(int irq, void *dev); -int ath_reset(struct ath_softc *sc); -void ath_scan_start(struct ath_softc *sc); -void ath_scan_end(struct ath_softc *sc); +int ath_reset(struct ath_softc *sc, bool retry_tx); int ath_set_channel(struct ath_softc *sc, struct ath9k_channel *hchan); -void ath_setup_rate(struct ath_softc *sc, - enum wireless_mode wMode, - enum RATE_TYPE type, - const struct ath9k_rate_table *rt); /*********************/ /* Utility Functions */ @@ -1056,17 +1042,5 @@ int ath_cabq_update(struct ath_softc *); void ath_get_currentCountry(struct ath_softc *sc, struct ath9k_country_entry *ctry); u64 ath_extend_tsf(struct ath_softc *sc, u32 rstamp); -void ath_internal_reset(struct ath_softc *sc); -u32 ath_chan2flags(struct ieee80211_channel *chan, struct ath_softc *sc); -dma_addr_t ath_skb_map_single(struct ath_softc *sc, - struct sk_buff *skb, - int direction, - dma_addr_t *pa); -void ath_skb_unmap_single(struct ath_softc *sc, - struct sk_buff *skb, - int direction, - dma_addr_t *pa); -void ath_mcast_merge(struct ath_softc *sc, u32 mfilt[2]); -enum ath9k_ht_macmode ath_cwm_macmode(struct ath_softc *sc); #endif /* CORE_H */ diff --git a/drivers/net/wireless/ath9k/hw.c b/drivers/net/wireless/ath9k/hw.c index 6dbfed0b414..4ccbbc07cf1 100644 --- a/drivers/net/wireless/ath9k/hw.c +++ b/drivers/net/wireless/ath9k/hw.c @@ -85,29 +85,6 @@ static const struct hal_percal_data adc_init_dc_cal = { ath9k_hw_adc_dccal_calibrate }; -static const struct ath_hal ar5416hal = { - AR5416_MAGIC, - 0, - 0, - NULL, - NULL, - CTRY_DEFAULT, - 0, - 0, - 0, - 0, - 0, - {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, - }, -}; - static struct ath9k_rate_table ar5416_11a_table = { 8, {0}, @@ -371,7 +348,7 @@ static void ath9k_hw_set_defaults(struct ath_hal *ah) ah->ah_config.intr_mitigation = 0; } -static inline void ath9k_hw_override_ini(struct ath_hal *ah, +static void ath9k_hw_override_ini(struct ath_hal *ah, struct ath9k_channel *chan) { if (!AR_SREV_5416_V20_OR_LATER(ah) @@ -381,8 +358,8 @@ static inline void ath9k_hw_override_ini(struct ath_hal *ah, REG_WRITE(ah, 0x9800 + (651 << 2), 0x11); } -static inline void ath9k_hw_init_bb(struct ath_hal *ah, - struct ath9k_channel *chan) +static void ath9k_hw_init_bb(struct ath_hal *ah, + struct ath9k_channel *chan) { u32 synthDelay; @@ -397,8 +374,8 @@ static inline void ath9k_hw_init_bb(struct ath_hal *ah, udelay(synthDelay + BASE_ACTIVATE_DELAY); } -static inline void ath9k_hw_init_interrupt_masks(struct ath_hal *ah, - enum ath9k_opmode opmode) +static void ath9k_hw_init_interrupt_masks(struct ath_hal *ah, + enum ath9k_opmode opmode) { struct ath_hal_5416 *ahp = AH5416(ah); @@ -428,7 +405,7 @@ static inline void ath9k_hw_init_interrupt_masks(struct ath_hal *ah, } } -static inline void ath9k_hw_init_qos(struct ath_hal *ah) +static void ath9k_hw_init_qos(struct ath_hal *ah) { REG_WRITE(ah, AR_MIC_QOS_CONTROL, 0x100aa); REG_WRITE(ah, AR_MIC_QOS_SELECT, 0x3210); @@ -523,7 +500,7 @@ static inline bool ath9k_hw_nvram_read(struct ath_hal *ah, return ath9k_hw_eeprom_read(ah, off, data); } -static inline bool ath9k_hw_fill_eeprom(struct ath_hal *ah) +static bool ath9k_hw_fill_eeprom(struct ath_hal *ah) { struct ath_hal_5416 *ahp = AH5416(ah); struct ar5416_eeprom *eep = &ahp->ah_eeprom; @@ -790,7 +767,7 @@ ath9k_hw_eeprom_set_board_values(struct ath_hal *ah, return true; } -static inline int ath9k_hw_check_eeprom(struct ath_hal *ah) +static int ath9k_hw_check_eeprom(struct ath_hal *ah) { u32 sum = 0, el; u16 *eepdata; @@ -1196,11 +1173,12 @@ static struct ath_hal_5416 *ath9k_hw_newstate(u16 devid, ah = &ahp->ah; - memcpy(&ahp->ah, &ar5416hal, sizeof(struct ath_hal)); - ah->ah_sc = sc; ah->ah_sh = mem; + ah->ah_magic = AR5416_MAGIC; + ah->ah_countryCode = CTRY_DEFAULT; + ah->ah_devid = devid; ah->ah_subvendorid = 0; @@ -1294,7 +1272,7 @@ u32 ath9k_hw_get_eeprom(struct ath_hal_5416 *ahp, } } -static inline int ath9k_hw_get_radiorev(struct ath_hal *ah) +static int ath9k_hw_get_radiorev(struct ath_hal *ah) { u32 val; int i; @@ -1307,7 +1285,7 @@ static inline int ath9k_hw_get_radiorev(struct ath_hal *ah) return ath9k_hw_reverse_bits(val, 8); } -static inline int ath9k_hw_init_macaddr(struct ath_hal *ah) +static int ath9k_hw_init_macaddr(struct ath_hal *ah) { u32 sum; int i; @@ -1389,7 +1367,7 @@ static u16 ath9k_hw_eeprom_get_spur_chan(struct ath_hal *ah, return spur_val; } -static inline int ath9k_hw_rfattach(struct ath_hal *ah) +static int ath9k_hw_rfattach(struct ath_hal *ah) { bool rfStatus = false; int ecode = 0; @@ -1434,8 +1412,8 @@ static int ath9k_hw_rf_claim(struct ath_hal *ah) return 0; } -static inline void ath9k_hw_init_pll(struct ath_hal *ah, - struct ath9k_channel *chan) +static void ath9k_hw_init_pll(struct ath_hal *ah, + struct ath9k_channel *chan) { u32 pll; @@ -1553,7 +1531,7 @@ static void ath9k_hw_set_operating_mode(struct ath_hal *ah, int opmode) } } -static inline void +static void ath9k_hw_set_rfmode(struct ath_hal *ah, struct ath9k_channel *chan) { u32 rfMode = 0; @@ -1623,7 +1601,7 @@ static bool ath9k_hw_set_reset(struct ath_hal *ah, int type) return true; } -static inline bool ath9k_hw_set_reset_power_on(struct ath_hal *ah) +static bool ath9k_hw_set_reset_power_on(struct ath_hal *ah) { REG_WRITE(ah, AR_RTC_FORCE_WAKE, AR_RTC_FORCE_WAKE_EN | AR_RTC_FORCE_WAKE_ON_INT); @@ -1664,7 +1642,7 @@ static bool ath9k_hw_set_reset_reg(struct ath_hal *ah, } } -static inline +static struct ath9k_channel *ath9k_hw_check_chan(struct ath_hal *ah, struct ath9k_channel *chan) { @@ -2098,7 +2076,7 @@ static void ath9k_hw_ani_attach(struct ath_hal *ah) ahp->ah_procPhyErr |= HAL_PROCESS_ANI; } -static inline void ath9k_hw_ani_setup(struct ath_hal *ah) +static void ath9k_hw_ani_setup(struct ath_hal *ah) { struct ath_hal_5416 *ahp = AH5416(ah); int i; @@ -2822,32 +2800,11 @@ static void ath9k_hw_gpio_cfg_output_mux(struct ath_hal *ah, } } -static bool ath9k_hw_cfg_output(struct ath_hal *ah, u32 gpio, - enum ath9k_gpio_output_mux_type - halSignalType) +void ath9k_hw_cfg_output(struct ath_hal *ah, u32 gpio, + u32 ah_signal_type) { - u32 ah_signal_type; u32 gpio_shift; - static u32 MuxSignalConversionTable[] = { - - AR_GPIO_OUTPUT_MUX_AS_OUTPUT, - - AR_GPIO_OUTPUT_MUX_AS_PCIE_ATTENTION_LED, - - AR_GPIO_OUTPUT_MUX_AS_PCIE_POWER_LED, - - AR_GPIO_OUTPUT_MUX_AS_MAC_NETWORK_LED, - - AR_GPIO_OUTPUT_MUX_AS_MAC_POWER_LED, - }; - - if ((halSignalType >= 0) - && (halSignalType < ARRAY_SIZE(MuxSignalConversionTable))) - ah_signal_type = MuxSignalConversionTable[halSignalType]; - else - return false; - ath9k_hw_gpio_cfg_output_mux(ah, gpio, ah_signal_type); gpio_shift = 2 * gpio; @@ -2856,16 +2813,12 @@ static bool ath9k_hw_cfg_output(struct ath_hal *ah, u32 gpio, AR_GPIO_OE_OUT, (AR_GPIO_OE_OUT_DRV_ALL << gpio_shift), (AR_GPIO_OE_OUT_DRV << gpio_shift)); - - return true; } -static bool ath9k_hw_set_gpio(struct ath_hal *ah, u32 gpio, - u32 val) +void ath9k_hw_set_gpio(struct ath_hal *ah, u32 gpio, u32 val) { REG_RMW(ah, AR_GPIO_IN_OUT, ((val & 1) << gpio), AR_GPIO_BIT(gpio)); - return true; } static u32 ath9k_hw_gpio_get(struct ath_hal *ah, u32 gpio) @@ -2883,7 +2836,7 @@ static u32 ath9k_hw_gpio_get(struct ath_hal *ah, u32 gpio) } } -static inline int ath9k_hw_post_attach(struct ath_hal *ah) +static int ath9k_hw_post_attach(struct ath_hal *ah) { int ecode; @@ -3595,7 +3548,7 @@ static inline bool ath9k_hw_fill_vpd_table(u8 pwrMin, return true; } -static inline void +static void ath9k_hw_get_gain_boundaries_pdadcs(struct ath_hal *ah, struct ath9k_channel *chan, struct cal_data_per_freq *pRawDataSet, @@ -3777,7 +3730,7 @@ ath9k_hw_get_gain_boundaries_pdadcs(struct ath_hal *ah, return; } -static inline bool +static bool ath9k_hw_set_power_cal_table(struct ath_hal *ah, struct ar5416_eeprom *pEepData, struct ath9k_channel *chan, @@ -3980,7 +3933,7 @@ void ath9k_hw_configpcipowersave(struct ath_hal *ah, int restore) } } -static inline void +static void ath9k_hw_get_legacy_target_powers(struct ath_hal *ah, struct ath9k_channel *chan, struct cal_target_power_leg *powInfo, @@ -4046,7 +3999,7 @@ ath9k_hw_get_legacy_target_powers(struct ath_hal *ah, } } -static inline void +static void ath9k_hw_get_target_powers(struct ath_hal *ah, struct ath9k_channel *chan, struct cal_target_power_ht *powInfo, @@ -4113,7 +4066,7 @@ ath9k_hw_get_target_powers(struct ath_hal *ah, } } -static inline u16 +static u16 ath9k_hw_get_max_edge_power(u16 freq, struct cal_ctl_edges *pRdEdgesPower, bool is2GHz) @@ -4143,7 +4096,7 @@ ath9k_hw_get_max_edge_power(u16 freq, return twiceMaxEdgePower; } -static inline bool +static bool ath9k_hw_set_power_per_rate_table(struct ath_hal *ah, struct ar5416_eeprom *pEepData, struct ath9k_channel *chan, @@ -5122,7 +5075,7 @@ static void ath9k_hw_spur_mitigate(struct ath_hal *ah, REG_WRITE(ah, AR_PHY_MASK2_P_61_45, tmp_mask); } -static inline void ath9k_hw_init_chain_masks(struct ath_hal *ah) +static void ath9k_hw_init_chain_masks(struct ath_hal *ah) { struct ath_hal_5416 *ahp = AH5416(ah); int rx_chainmask, tx_chainmask; @@ -5326,7 +5279,7 @@ bool ath9k_hw_setslottime(struct ath_hal *ah, u32 us) } } -static inline void ath9k_hw_init_user_settings(struct ath_hal *ah) +static void ath9k_hw_init_user_settings(struct ath_hal *ah) { struct ath_hal_5416 *ahp = AH5416(ah); @@ -5345,7 +5298,7 @@ static inline void ath9k_hw_init_user_settings(struct ath_hal *ah) ath9k_hw_set_global_txtimeout(ah, ahp->ah_globaltxtimeout); } -static inline int +static int ath9k_hw_process_ini(struct ath_hal *ah, struct ath9k_channel *chan, enum ath9k_ht_macmode macmode) @@ -5476,7 +5429,7 @@ ath9k_hw_process_ini(struct ath_hal *ah, return 0; } -static inline void ath9k_hw_setup_calibration(struct ath_hal *ah, +static void ath9k_hw_setup_calibration(struct ath_hal *ah, struct hal_cal_list *currCal) { REG_RMW_FIELD(ah, AR_PHY_TIMING_CTRL4(0), @@ -5512,8 +5465,8 @@ static inline void ath9k_hw_setup_calibration(struct ath_hal *ah, AR_PHY_TIMING_CTRL4_DO_CAL); } -static inline void ath9k_hw_reset_calibration(struct ath_hal *ah, - struct hal_cal_list *currCal) +static void ath9k_hw_reset_calibration(struct ath_hal *ah, + struct hal_cal_list *currCal) { struct ath_hal_5416 *ahp = AH5416(ah); int i; @@ -5532,7 +5485,7 @@ static inline void ath9k_hw_reset_calibration(struct ath_hal *ah, ahp->ah_CalSamples = 0; } -static inline void +static void ath9k_hw_per_calibration(struct ath_hal *ah, struct ath9k_channel *ichan, u8 rxchainmask, @@ -5622,7 +5575,7 @@ static inline bool ath9k_hw_run_init_cals(struct ath_hal *ah, return true; } -static inline bool +static bool ath9k_hw_channel_change(struct ath_hal *ah, struct ath9k_channel *chan, enum ath9k_ht_macmode macmode) @@ -5799,8 +5752,8 @@ static bool ath9k_hw_iscal_supported(struct ath_hal *ah, return retval; } -static inline bool ath9k_hw_init_cal(struct ath_hal *ah, - struct ath9k_channel *chan) +static bool ath9k_hw_init_cal(struct ath_hal *ah, + struct ath9k_channel *chan) { struct ath_hal_5416 *ahp = AH5416(ah); struct ath9k_channel *ichan = @@ -5861,7 +5814,7 @@ static inline bool ath9k_hw_init_cal(struct ath_hal *ah, } -bool ath9k_hw_reset(struct ath_hal *ah, enum ath9k_opmode opmode, +bool ath9k_hw_reset(struct ath_hal *ah, struct ath9k_channel *chan, enum ath9k_ht_macmode macmode, u8 txchainmask, u8 rxchainmask, @@ -5945,7 +5898,7 @@ bool ath9k_hw_reset(struct ath_hal *ah, enum ath9k_opmode opmode, else ath9k_hw_set_gpio(ah, 9, 1); } - ath9k_hw_cfg_output(ah, 9, ATH9K_GPIO_OUTPUT_MUX_AS_OUTPUT); + ath9k_hw_cfg_output(ah, 9, AR_GPIO_OUTPUT_MUX_AS_OUTPUT); } ecode = ath9k_hw_process_ini(ah, chan, macmode); @@ -5975,7 +5928,7 @@ bool ath9k_hw_reset(struct ath_hal *ah, enum ath9k_opmode opmode, | (ah->ah_config. ack_6mb ? AR_STA_ID1_ACKCTS_6MB : 0) | ahp->ah_staId1Defaults); - ath9k_hw_set_operating_mode(ah, opmode); + ath9k_hw_set_operating_mode(ah, ah->ah_opmode); REG_WRITE(ah, AR_BSSMSKL, get_unaligned_le32(ahp->ah_bssidmask)); REG_WRITE(ah, AR_BSSMSKU, get_unaligned_le16(ahp->ah_bssidmask + 4)); @@ -6005,13 +5958,11 @@ bool ath9k_hw_reset(struct ath_hal *ah, enum ath9k_opmode opmode, for (i = 0; i < ah->ah_caps.total_queues; i++) ath9k_hw_resettxqueue(ah, i); - ath9k_hw_init_interrupt_masks(ah, opmode); + ath9k_hw_init_interrupt_masks(ah, ah->ah_opmode); ath9k_hw_init_qos(ah); ath9k_hw_init_user_settings(ah); - ah->ah_opmode = opmode; - REG_WRITE(ah, AR_STA_ID1, REG_READ(ah, AR_STA_ID1) | AR_STA_ID1_PRESERVE_SEQNUM); @@ -7678,8 +7629,7 @@ bool ath9k_hw_resettxqueue(struct ath_hal *ah, u32 q) REG_WRITE(ah, AR_DRETRY_LIMIT(q), SM(INIT_SSH_RETRY, AR_D_RETRY_LIMIT_STA_SH) | SM(INIT_SLG_RETRY, AR_D_RETRY_LIMIT_STA_LG) - | SM(qi->tqi_shretry, AR_D_RETRY_LIMIT_FR_SH) - ); + | SM(qi->tqi_shretry, AR_D_RETRY_LIMIT_FR_SH)); REG_WRITE(ah, AR_QMISC(q), AR_Q_MISC_DCU_EARLY_TERM_REQ); REG_WRITE(ah, AR_DMISC(q), @@ -8324,15 +8274,7 @@ struct ath_hal *ath9k_hw_attach(u16 devid, *error = -ENXIO; break; } - if (ah != NULL) { - ah->ah_devid = ah->ah_devid; - ah->ah_subvendorid = ah->ah_subvendorid; - ah->ah_macVersion = ah->ah_macVersion; - ah->ah_macRev = ah->ah_macRev; - ah->ah_phyRev = ah->ah_phyRev; - ah->ah_analog5GhzRev = ah->ah_analog5GhzRev; - ah->ah_analog2GhzRev = ah->ah_analog2GhzRev; - } + return ah; } diff --git a/drivers/net/wireless/ath9k/hw.h b/drivers/net/wireless/ath9k/hw.h index ae680f21ba7..2113818ee93 100644 --- a/drivers/net/wireless/ath9k/hw.h +++ b/drivers/net/wireless/ath9k/hw.h @@ -314,14 +314,11 @@ struct ar5416_desc { #define RXSTATUS_RATE(ah, ads) (AR_SREV_5416_V20_OR_LATER(ah) ? \ MS(ads->ds_rxstatus0, AR_RxRate) : \ (ads->ds_rxstatus3 >> 2) & 0xFF) -#define RXSTATUS_DUPLICATE(ah, ads) (AR_SREV_5416_V20_OR_LATER(ah) ? \ - MS(ads->ds_rxstatus3, AR_Parallel40) : \ - (ads->ds_rxstatus3 >> 10) & 0x1) -#define set11nTries(_series, _index) \ +#define set11nTries(_series, _index) \ (SM((_series)[_index].Tries, AR_XmitDataTries##_index)) -#define set11nRate(_series, _index) \ +#define set11nRate(_series, _index) \ (SM((_series)[_index].Rate, AR_XmitRate##_index)) #define set11nPktDurRTSCTS(_series, _index) \ @@ -330,11 +327,11 @@ struct ar5416_desc { AR_RTSCTSQual##_index : 0)) #define set11nRateFlags(_series, _index) \ - (((_series)[_index].RateFlags & ATH9K_RATESERIES_2040 ? \ - AR_2040_##_index : 0) \ - |((_series)[_index].RateFlags & ATH9K_RATESERIES_HALFGI ? \ - AR_GI##_index : 0) \ - |SM((_series)[_index].ChSel, AR_ChainSel##_index)) + (((_series)[_index].RateFlags & ATH9K_RATESERIES_2040 ? \ + AR_2040_##_index : 0) \ + |((_series)[_index].RateFlags & ATH9K_RATESERIES_HALFGI ? \ + AR_GI##_index : 0) \ + |SM((_series)[_index].ChSel, AR_ChainSel##_index)) #define AR_SREV_9100(ah) ((ah->ah_macVersion) == AR_SREV_VERSION_9100) @@ -346,9 +343,6 @@ struct ar5416_desc { #define MAX_TX_FIFO_THRESHOLD ((4096 / 64) - 1) #define INIT_TX_FIFO_THRESHOLD MIN_TX_FIFO_THRESHOLD -#define NUM_CORNER_FIX_BITS_2133 7 -#define CCK_OFDM_GAIN_DELTA 15 - struct ar5416AniState { struct ath9k_channel c; u8 noiseImmunityLevel; @@ -377,11 +371,8 @@ struct ar5416AniState { }; #define HAL_PROCESS_ANI 0x00000001 -#define HAL_RADAR_EN 0x80000000 -#define HAL_AR_EN 0x40000000 - #define DO_ANI(ah) \ - ((AH5416(ah)->ah_procPhyErr & HAL_PROCESS_ANI)) + ((AH5416(ah)->ah_procPhyErr & HAL_PROCESS_ANI)) struct ar5416Stats { u32 ast_ani_niup; @@ -425,7 +416,6 @@ struct ar5416Stats { #define AR5416_EEP_MINOR_VER_7 0x7 #define AR5416_EEP_MINOR_VER_9 0x9 -#define AR5416_EEP_START_LOC 256 #define AR5416_NUM_5G_CAL_PIERS 8 #define AR5416_NUM_2G_CAL_PIERS 4 #define AR5416_NUM_5G_20_TARGET_POWERS 8 @@ -441,25 +431,10 @@ struct ar5416Stats { #define AR5416_EEPROM_MODAL_SPURS 5 #define AR5416_MAX_RATE_POWER 63 #define AR5416_NUM_PDADC_VALUES 128 -#define AR5416_NUM_RATES 16 #define AR5416_BCHAN_UNUSED 0xFF #define AR5416_MAX_PWR_RANGE_IN_HALF_DB 64 -#define AR5416_EEPMISC_BIG_ENDIAN 0x01 #define AR5416_MAX_CHAINS 3 -#define AR5416_ANT_16S 25 - -#define AR5416_NUM_ANT_CHAIN_FIELDS 7 -#define AR5416_NUM_ANT_COMMON_FIELDS 4 -#define AR5416_SIZE_ANT_CHAIN_FIELD 3 -#define AR5416_SIZE_ANT_COMMON_FIELD 4 -#define AR5416_ANT_CHAIN_MASK 0x7 -#define AR5416_ANT_COMMON_MASK 0xf -#define AR5416_CHAIN_0_IDX 0 -#define AR5416_CHAIN_1_IDX 1 -#define AR5416_CHAIN_2_IDX 2 - #define AR5416_PWR_TABLE_OFFSET -5 -#define AR5416_LEGACY_CHAINMASK 1 enum eeprom_param { EEP_NFTHRESH_5, @@ -633,7 +608,7 @@ struct ar5416IniArray { }; #define INIT_INI_ARRAY(iniarray, array, rows, columns) do { \ - (iniarray)->ia_array = (u32 *)(array); \ + (iniarray)->ia_array = (u32 *)(array); \ (iniarray)->ia_rows = (rows); \ (iniarray)->ia_columns = (columns); \ } while (0) @@ -641,16 +616,16 @@ struct ar5416IniArray { #define INI_RA(iniarray, row, column) \ (((iniarray)->ia_array)[(row) * ((iniarray)->ia_columns) + (column)]) -#define INIT_CAL(_perCal) do { \ - (_perCal)->calState = CAL_WAITING; \ - (_perCal)->calNext = NULL; \ +#define INIT_CAL(_perCal) do { \ + (_perCal)->calState = CAL_WAITING; \ + (_perCal)->calNext = NULL; \ } while (0) #define INSERT_CAL(_ahp, _perCal) \ do { \ if ((_ahp)->ah_cal_list_last == NULL) { \ - (_ahp)->ah_cal_list = \ - (_ahp)->ah_cal_list_last = (_perCal); \ + (_ahp)->ah_cal_list = \ + (_ahp)->ah_cal_list_last = (_perCal); \ ((_ahp)->ah_cal_list_last)->calNext = (_perCal); \ } else { \ ((_ahp)->ah_cal_list_last)->calNext = (_perCal); \ @@ -696,25 +671,29 @@ struct hal_cal_list { struct ath_hal_5416 { struct ath_hal ah; struct ar5416_eeprom ah_eeprom; + struct ar5416Stats ah_stats; + struct ath9k_tx_queue_info ah_txq[ATH9K_NUM_TX_QUEUES]; + void __iomem *ah_cal_mem; + u8 ah_macaddr[ETH_ALEN]; u8 ah_bssid[ETH_ALEN]; u8 ah_bssidmask[ETH_ALEN]; u16 ah_assocId; + int16_t ah_curchanRadIndex; u32 ah_maskReg; - struct ar5416Stats ah_stats; - u32 ah_txDescMask; u32 ah_txOkInterruptMask; u32 ah_txErrInterruptMask; u32 ah_txDescInterruptMask; u32 ah_txEolInterruptMask; u32 ah_txUrnInterruptMask; - struct ath9k_tx_queue_info ah_txq[ATH9K_NUM_TX_QUEUES]; - enum ath9k_power_mode ah_powerMode; bool ah_chipFullSleep; u32 ah_atimWindow; - enum ath9k_ant_setting ah_diversityControl; u16 ah_antennaSwitchSwap; + enum ath9k_power_mode ah_powerMode; + enum ath9k_ant_setting ah_diversityControl; + + /* Calibration */ enum hal_cal_types ah_suppCals; struct hal_cal_list ah_iqCalData; struct hal_cal_list ah_adcGainCalData; @@ -751,16 +730,16 @@ struct ath_hal_5416 { int32_t sign[AR5416_MAX_CHAINS]; } ah_Meas3; u16 ah_CalSamples; - u32 ah_tx6PowerInHalfDbm; + u32 ah_staId1Defaults; u32 ah_miscMode; - bool ah_tpcEnabled; - u32 ah_beaconInterval; enum { AUTO_32KHZ, USE_32KHZ, DONT_USE_32KHZ, } ah_enable32kHzClock; + + /* RF */ u32 *ah_analogBank0Data; u32 *ah_analogBank1Data; u32 *ah_analogBank2Data; @@ -770,8 +749,9 @@ struct ath_hal_5416 { u32 *ah_analogBank7Data; u32 *ah_addac5416_21; u32 *ah_bank6Temp; - u32 ah_ofdmTxPower; + int16_t ah_txPowerIndexOffset; + u32 ah_beaconInterval; u32 ah_slottime; u32 ah_acktimeout; u32 ah_ctstimeout; @@ -780,7 +760,8 @@ struct ath_hal_5416 { u32 ah_gpioSelect; u32 ah_polarity; u32 ah_gpioBit; - bool ah_eepEnabled; + + /* ANI */ u32 ah_procPhyErr; bool ah_hasHwPhyCounters; u32 ah_aniPeriod; @@ -790,18 +771,14 @@ struct ath_hal_5416 { int ah_coarseHigh[5]; int ah_coarseLow[5]; int ah_firpwr[5]; - u16 ah_ratesArray[16]; + enum ath9k_ani_cmd ah_ani_function; + u32 ah_intrTxqs; bool ah_intrMitigation; - u32 ah_cycleCount; - u32 ah_ctlBusy; - u32 ah_extBusy; enum ath9k_ht_extprotspacing ah_extprotspacing; u8 ah_txchainmask; u8 ah_rxchainmask; - int ah_hwp; - void __iomem *ah_cal_mem; - enum ath9k_ani_cmd ah_ani_function; + struct ar5416IniArray ah_iniModes; struct ar5416IniArray ah_iniCommon; struct ar5416IniArray ah_iniBank0; @@ -820,10 +797,6 @@ struct ath_hal_5416 { #define FREQ2FBIN(x, y) ((y) ? ((x) - 2300) : (((x) - 4800) / 5)) -#define IS_5416_EMU(ah) \ - ((ah->ah_devid == AR5416_DEVID_EMU) || \ - (ah->ah_devid == AR5416_DEVID_EMU_PCIE)) - #define ar5416RfDetach(ah) do { \ if (AH5416(ah)->ah_rfHal.rfDetach != NULL) \ AH5416(ah)->ah_rfHal.rfDetach(ah); \ @@ -841,8 +814,8 @@ struct ath_hal_5416 { #define REG_WRITE_ARRAY(iniarray, column, regWr) do { \ int r; \ for (r = 0; r < ((iniarray)->ia_rows); r++) { \ - REG_WRITE(ah, INI_RA((iniarray), (r), 0), \ - INI_RA((iniarray), r, (column))); \ + REG_WRITE(ah, INI_RA((iniarray), (r), 0), \ + INI_RA((iniarray), r, (column))); \ DO_DELAY(regWr); \ } \ } while (0) @@ -852,30 +825,21 @@ struct ath_hal_5416 { #define COEF_SCALE_S 24 #define HT40_CHANNEL_CENTER_SHIFT 10 -#define ar5416CheckOpMode(_opmode) \ - ((_opmode == ATH9K_M_STA) || (_opmode == ATH9K_M_IBSS) || \ - (_opmode == ATH9K_M_HOSTAP) || (_opmode == ATH9K_M_MONITOR)) - #define AR5416_EEPROM_MAGIC_OFFSET 0x0 #define AR5416_EEPROM_S 2 #define AR5416_EEPROM_OFFSET 0x2000 -#define AR5416_EEPROM_START_ADDR \ +#define AR5416_EEPROM_START_ADDR \ (AR_SREV_9100(ah)) ? 0x1fff1000 : 0x503f1200 #define AR5416_EEPROM_MAX 0xae0 -#define ar5416_get_eep_ver(_ahp) \ +#define ar5416_get_eep_ver(_ahp) \ (((_ahp)->ah_eeprom.baseEepHeader.version >> 12) & 0xF) -#define ar5416_get_eep_rev(_ahp) \ +#define ar5416_get_eep_rev(_ahp) \ (((_ahp)->ah_eeprom.baseEepHeader.version) & 0xFFF) -#define ar5416_get_ntxchains(_txchainmask) \ +#define ar5416_get_ntxchains(_txchainmask) \ (((_txchainmask >> 2) & 1) + \ ((_txchainmask >> 1) & 1) + (_txchainmask & 1)) -#define IS_EEP_MINOR_V3(_ahp) \ - (ath9k_hw_get_eeprom((_ahp), EEP_MINOR_REV) >= AR5416_EEP_MINOR_VER_3) - -#define FIXED_CCA_THRESHOLD 15 - #ifdef __BIG_ENDIAN #define AR5416_EEPROM_MAGIC 0x5aa5 #else @@ -910,8 +874,6 @@ struct ath_hal_5416 { #define AR_GPIOD_MASK 0x00001FFF #define AR_GPIO_BIT(_gpio) (1 << (_gpio)) -#define MAX_ANALOG_START 319 - #define HAL_EP_RND(x, mul) \ ((((x)%(mul)) >= ((mul)/2)) ? ((x) + ((mul) - 1)) / (mul) : (x)/(mul)) #define BEACON_RSSI(ahp) \ @@ -923,8 +885,6 @@ struct ath_hal_5416 { #define AH_TIMEOUT 100000 #define AH_TIME_QUANTUM 10 -#define IS(_c, _f) (((_c)->channelFlags & _f) || 0) - #define AR_KEYTABLE_SIZE 128 #define POWER_UP_TIME 200000 @@ -964,6 +924,6 @@ struct ath_hal_5416 { #define OFDM_SYMBOL_TIME_QUARTER 16 u32 ath9k_hw_get_eeprom(struct ath_hal_5416 *ahp, - enum eeprom_param param); + enum eeprom_param param); #endif diff --git a/drivers/net/wireless/ath9k/main.c b/drivers/net/wireless/ath9k/main.c index c5107f269f2..245b7308a9a 100644 --- a/drivers/net/wireless/ath9k/main.c +++ b/drivers/net/wireless/ath9k/main.c @@ -22,8 +22,6 @@ #define ATH_PCI_VERSION "0.1" #define IEEE80211_HTCAP_MAXRXAMPDU_FACTOR 13 -#define IEEE80211_ACTION_CAT_HT 7 -#define IEEE80211_ACTION_HT_TXCHWIDTH 0 static char *dev_info = "ath9k"; @@ -213,21 +211,16 @@ static int ath_key_config(struct ath_softc *sc, static void ath_key_delete(struct ath_softc *sc, struct ieee80211_key_conf *key) { -#define ATH_MAX_NUM_KEYS 4 int freeslot; - freeslot = (key->keyidx >= ATH_MAX_NUM_KEYS) ? 1 : 0; + freeslot = (key->keyidx >= 4) ? 1 : 0; ath_key_reset(sc, key->keyidx, freeslot); -#undef ATH_MAX_NUM_KEYS } static void setup_ht_cap(struct ieee80211_ht_info *ht_info) { -/* Until mac80211 includes these fields */ - -#define IEEE80211_HT_CAP_DSSSCCK40 0x1000 -#define IEEE80211_HT_CAP_MAXRXAMPDU_65536 0x3 /* 2 ^ 16 */ -#define IEEE80211_HT_CAP_MPDUDENSITY_8 0x6 /* 8 usec */ +#define ATH9K_HT_CAP_MAXRXAMPDU_65536 0x3 /* 2 ^ 16 */ +#define ATH9K_HT_CAP_MPDUDENSITY_8 0x6 /* 8 usec */ ht_info->ht_supported = 1; ht_info->cap = (u16)IEEE80211_HT_CAP_SUP_WIDTH @@ -235,8 +228,8 @@ static void setup_ht_cap(struct ieee80211_ht_info *ht_info) |(u16)IEEE80211_HT_CAP_SGI_40 |(u16)IEEE80211_HT_CAP_DSSSCCK40; - ht_info->ampdu_factor = IEEE80211_HT_CAP_MAXRXAMPDU_65536; - ht_info->ampdu_density = IEEE80211_HT_CAP_MPDUDENSITY_8; + ht_info->ampdu_factor = ATH9K_HT_CAP_MAXRXAMPDU_65536; + ht_info->ampdu_density = ATH9K_HT_CAP_MPDUDENSITY_8; /* setup supported mcs set */ memset(ht_info->supp_mcs_set, 0, 16); ht_info->supp_mcs_set[0] = 0xff; @@ -369,6 +362,20 @@ static int ath9k_tx(struct ieee80211_hw *hw, { struct ath_softc *sc = hw->priv; int hdrlen, padsize; + struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); + + /* + * As a temporary workaround, assign seq# here; this will likely need + * to be cleaned up to work better with Beacon transmission and virtual + * BSSes. + */ + if (info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ) { + struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; + if (info->flags & IEEE80211_TX_CTL_FIRST_FRAGMENT) + sc->seq_no += 0x10; + hdr->seq_ctrl &= cpu_to_le16(IEEE80211_SCTL_FRAG); + hdr->seq_ctrl |= cpu_to_le16(sc->seq_no); + } /* Add the padding after the header if this is not already done */ hdrlen = ieee80211_get_hdrlen_from_skb(skb); @@ -427,10 +434,13 @@ static int ath9k_add_interface(struct ieee80211_hw *hw, case IEEE80211_IF_TYPE_IBSS: ic_opmode = ATH9K_M_IBSS; break; + case IEEE80211_IF_TYPE_AP: + ic_opmode = ATH9K_M_HOSTAP; + break; default: DPRINTF(sc, ATH_DBG_FATAL, - "%s: Only STA and IBSS are supported currently\n", - __func__); + "%s: Interface type %d not yet supported\n", + __func__, conf->type); return -EOPNOTSUPP; } @@ -473,7 +483,8 @@ static void ath9k_remove_interface(struct ieee80211_hw *hw, ath_rate_newstate(sc, avp); /* Reclaim beacon resources */ - if (sc->sc_opmode == ATH9K_M_HOSTAP || sc->sc_opmode == ATH9K_M_IBSS) { + if (sc->sc_ah->ah_opmode == ATH9K_M_HOSTAP || + sc->sc_ah->ah_opmode == ATH9K_M_IBSS) { ath9k_hw_stoptxdma(sc->sc_ah, sc->sc_bhalq); ath_beacon_return(sc, avp); } @@ -481,7 +492,7 @@ static void ath9k_remove_interface(struct ieee80211_hw *hw, /* Set interrupt mask */ sc->sc_imask &= ~(ATH9K_INT_SWBA | ATH9K_INT_BMISS); ath9k_hw_set_interrupts(sc->sc_ah, sc->sc_imask & ~ATH9K_INT_GLOBAL); - sc->sc_beacons = 0; + sc->sc_flags &= ~SC_OP_BEACONS; error = ath_vap_detach(sc, 0); if (error) @@ -530,6 +541,7 @@ static int ath9k_config_interface(struct ieee80211_hw *hw, struct ieee80211_if_conf *conf) { struct ath_softc *sc = hw->priv; + struct ath_hal *ah = sc->sc_ah; struct ath_vap *avp; u32 rfilt = 0; int error, i; @@ -542,6 +554,17 @@ static int ath9k_config_interface(struct ieee80211_hw *hw, return -EINVAL; } + /* TODO: Need to decide which hw opmode to use for multi-interface + * cases */ + if (vif->type == IEEE80211_IF_TYPE_AP && + ah->ah_opmode != ATH9K_M_HOSTAP) { + ah->ah_opmode = ATH9K_M_HOSTAP; + ath9k_hw_setopmode(ah); + ath9k_hw_write_associd(ah, sc->sc_myaddr, 0); + /* Request full reset to get hw opmode changed properly */ + sc->sc_flags |= SC_OP_FULL_RESET; + } + if ((conf->changed & IEEE80211_IFCC_BSSID) && !is_zero_ether_addr(conf->bssid)) { switch (vif->type) { @@ -550,10 +573,6 @@ static int ath9k_config_interface(struct ieee80211_hw *hw, /* Update ratectrl about the new state */ ath_rate_newstate(sc, avp); - /* Set rx filter */ - rfilt = ath_calcrxfilter(sc); - ath9k_hw_setrxfilter(sc->sc_ah, rfilt); - /* Set BSSID */ memcpy(sc->sc_curbssid, conf->bssid, ETH_ALEN); sc->sc_curaid = 0; @@ -586,7 +605,7 @@ static int ath9k_config_interface(struct ieee80211_hw *hw, print_mac(mac, sc->sc_curbssid), sc->sc_curaid); /* need to reconfigure the beacon */ - sc->sc_beacons = 0; + sc->sc_flags &= ~SC_OP_BEACONS ; break; default: @@ -595,7 +614,8 @@ static int ath9k_config_interface(struct ieee80211_hw *hw, } if ((conf->changed & IEEE80211_IFCC_BEACON) && - (vif->type == IEEE80211_IF_TYPE_IBSS)) { + ((vif->type == IEEE80211_IF_TYPE_IBSS) || + (vif->type == IEEE80211_IF_TYPE_AP))) { /* * Allocate and setup the beacon frame. * @@ -637,8 +657,7 @@ static int ath9k_config_interface(struct ieee80211_hw *hw, FIF_BCN_PRBRESP_PROMISC | \ FIF_FCSFAIL) -/* Accept unicast, bcast and mcast frames */ - +/* FIXME: sc->sc_full_reset ? */ static void ath9k_configure_filter(struct ieee80211_hw *hw, unsigned int changed_flags, unsigned int *total_flags, @@ -646,16 +665,22 @@ static void ath9k_configure_filter(struct ieee80211_hw *hw, struct dev_mc_list *mclist) { struct ath_softc *sc = hw->priv; + u32 rfilt; changed_flags &= SUPPORTED_FILTERS; *total_flags &= SUPPORTED_FILTERS; + sc->rx_filter = *total_flags; + rfilt = ath_calcrxfilter(sc); + ath9k_hw_setrxfilter(sc->sc_ah, rfilt); + if (changed_flags & FIF_BCN_PRBRESP_PROMISC) { if (*total_flags & FIF_BCN_PRBRESP_PROMISC) - ath_scan_start(sc); - else - ath_scan_end(sc); + ath9k_hw_write_associd(sc->sc_ah, ath_bcast_mac, 0); } + + DPRINTF(sc, ATH_DBG_CONFIG, "%s: Set HW RX filter: 0x%x\n", + __func__, sc->rx_filter); } static void ath9k_sta_notify(struct ieee80211_hw *hw, @@ -833,7 +858,7 @@ static void ath9k_bss_assoc_info(struct ath_softc *sc, /* Configure the beacon */ ath_beacon_config(sc, 0); - sc->sc_beacons = 1; + sc->sc_flags |= SC_OP_BEACONS; /* Reset rssi stats */ sc->sc_halstats.ns_avgbrssi = ATH_RSSI_DUMMY_MARKER; @@ -896,9 +921,9 @@ static void ath9k_bss_info_changed(struct ieee80211_hw *hw, __func__, bss_conf->use_short_preamble); if (bss_conf->use_short_preamble) - sc->sc_flags |= ATH_PREAMBLE_SHORT; + sc->sc_flags |= SC_OP_PREAMBLE_SHORT; else - sc->sc_flags &= ~ATH_PREAMBLE_SHORT; + sc->sc_flags &= ~SC_OP_PREAMBLE_SHORT; } if (changed & BSS_CHANGED_ERP_CTS_PROT) { @@ -907,9 +932,9 @@ static void ath9k_bss_info_changed(struct ieee80211_hw *hw, bss_conf->use_cts_prot); if (bss_conf->use_cts_prot && hw->conf.channel->band != IEEE80211_BAND_5GHZ) - sc->sc_flags |= ATH_PROTECT_ENABLE; + sc->sc_flags |= SC_OP_PROTECT_ENABLE; else - sc->sc_flags &= ~ATH_PROTECT_ENABLE; + sc->sc_flags &= ~SC_OP_PROTECT_ENABLE; } if (changed & BSS_CHANGED_HT) { @@ -1037,15 +1062,6 @@ void ath_get_beaconconfig(struct ath_softc *sc, conf->bmiss_timeout = ATH_DEFAULT_BMISS_LIMIT * conf->listen_interval; } -int ath_update_beacon(struct ath_softc *sc, - int if_id, - struct ath_beacon_offset *bo, - struct sk_buff *skb, - int mcast) -{ - return 0; -} - void ath_tx_complete(struct ath_softc *sc, struct sk_buff *skb, struct ath_xmit_status *tx_status, struct ath_node *an) { @@ -1085,7 +1101,7 @@ void ath_tx_complete(struct ath_softc *sc, struct sk_buff *skb, ath_node_put(sc, an, ATH9K_BH_STATUS_CHANGE); } -int ath__rx_indicate(struct ath_softc *sc, +int _ath_rx_indicate(struct ath_softc *sc, struct sk_buff *skb, struct ath_recv_status *status, u16 keyix) @@ -1105,9 +1121,6 @@ int ath__rx_indicate(struct ath_softc *sc, skb_pull(skb, padsize); } - /* remove FCS before passing up to protocol stack */ - skb_trim(skb, (skb->len - FCS_LEN)); - /* Prepare rx status */ ath9k_rx_prepare(sc, skb, status, &rx_status); @@ -1156,9 +1169,119 @@ int ath_rx_subframe(struct ath_node *an, return 0; } -enum ath9k_ht_macmode ath_cwm_macmode(struct ath_softc *sc) +/********************************/ +/* LED functions */ +/********************************/ + +static void ath_led_brightness(struct led_classdev *led_cdev, + enum led_brightness brightness) +{ + struct ath_led *led = container_of(led_cdev, struct ath_led, led_cdev); + struct ath_softc *sc = led->sc; + + switch (brightness) { + case LED_OFF: + if (led->led_type == ATH_LED_ASSOC || + led->led_type == ATH_LED_RADIO) + sc->sc_flags &= ~SC_OP_LED_ASSOCIATED; + ath9k_hw_set_gpio(sc->sc_ah, ATH_LED_PIN, + (led->led_type == ATH_LED_RADIO) ? 1 : + !!(sc->sc_flags & SC_OP_LED_ASSOCIATED)); + break; + case LED_FULL: + if (led->led_type == ATH_LED_ASSOC) + sc->sc_flags |= SC_OP_LED_ASSOCIATED; + ath9k_hw_set_gpio(sc->sc_ah, ATH_LED_PIN, 0); + break; + default: + break; + } +} + +static int ath_register_led(struct ath_softc *sc, struct ath_led *led, + char *trigger) +{ + int ret; + + led->sc = sc; + led->led_cdev.name = led->name; + led->led_cdev.default_trigger = trigger; + led->led_cdev.brightness_set = ath_led_brightness; + + ret = led_classdev_register(wiphy_dev(sc->hw->wiphy), &led->led_cdev); + if (ret) + DPRINTF(sc, ATH_DBG_FATAL, + "Failed to register led:%s", led->name); + else + led->registered = 1; + return ret; +} + +static void ath_unregister_led(struct ath_led *led) +{ + if (led->registered) { + led_classdev_unregister(&led->led_cdev); + led->registered = 0; + } +} + +static void ath_deinit_leds(struct ath_softc *sc) { - return sc->sc_ht_info.tx_chan_width; + ath_unregister_led(&sc->assoc_led); + sc->sc_flags &= ~SC_OP_LED_ASSOCIATED; + ath_unregister_led(&sc->tx_led); + ath_unregister_led(&sc->rx_led); + ath_unregister_led(&sc->radio_led); + ath9k_hw_set_gpio(sc->sc_ah, ATH_LED_PIN, 1); +} + +static void ath_init_leds(struct ath_softc *sc) +{ + char *trigger; + int ret; + + /* Configure gpio 1 for output */ + ath9k_hw_cfg_output(sc->sc_ah, ATH_LED_PIN, + AR_GPIO_OUTPUT_MUX_AS_OUTPUT); + /* LED off, active low */ + ath9k_hw_set_gpio(sc->sc_ah, ATH_LED_PIN, 1); + + trigger = ieee80211_get_radio_led_name(sc->hw); + snprintf(sc->radio_led.name, sizeof(sc->radio_led.name), + "ath9k-%s:radio", wiphy_name(sc->hw->wiphy)); + ret = ath_register_led(sc, &sc->radio_led, trigger); + sc->radio_led.led_type = ATH_LED_RADIO; + if (ret) + goto fail; + + trigger = ieee80211_get_assoc_led_name(sc->hw); + snprintf(sc->assoc_led.name, sizeof(sc->assoc_led.name), + "ath9k-%s:assoc", wiphy_name(sc->hw->wiphy)); + ret = ath_register_led(sc, &sc->assoc_led, trigger); + sc->assoc_led.led_type = ATH_LED_ASSOC; + if (ret) + goto fail; + + trigger = ieee80211_get_tx_led_name(sc->hw); + snprintf(sc->tx_led.name, sizeof(sc->tx_led.name), + "ath9k-%s:tx", wiphy_name(sc->hw->wiphy)); + ret = ath_register_led(sc, &sc->tx_led, trigger); + sc->tx_led.led_type = ATH_LED_TX; + if (ret) + goto fail; + + trigger = ieee80211_get_rx_led_name(sc->hw); + snprintf(sc->rx_led.name, sizeof(sc->rx_led.name), + "ath9k-%s:rx", wiphy_name(sc->hw->wiphy)); + ret = ath_register_led(sc, &sc->rx_led, trigger); + sc->rx_led.led_type = ATH_LED_RX; + if (ret) + goto fail; + + return; + +fail: + ath_deinit_leds(sc); } static int ath_detach(struct ath_softc *sc) @@ -1167,6 +1290,9 @@ static int ath_detach(struct ath_softc *sc) DPRINTF(sc, ATH_DBG_CONFIG, "%s: Detach ATH hw\n", __func__); + /* Deinit LED control */ + ath_deinit_leds(sc); + /* Unregister hw */ ieee80211_unregister_hw(hw); @@ -1260,18 +1386,21 @@ static int ath_attach(u16 devid, goto bad; } + /* Initialize LED control */ + ath_init_leds(sc); + /* initialize tx/rx engine */ error = ath_tx_init(sc, ATH_TXBUF); if (error != 0) - goto bad1; + goto detach; error = ath_rx_init(sc, ATH_RXBUF); if (error != 0) - goto bad1; + goto detach; return 0; -bad1: +detach: ath_detach(sc); bad: return error; @@ -1350,9 +1479,16 @@ static int ath_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id) goto bad2; } - hw->flags = IEEE80211_HW_SIGNAL_DBM | + hw->flags = IEEE80211_HW_RX_INCLUDES_FCS | + IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING | + IEEE80211_HW_SIGNAL_DBM | IEEE80211_HW_NOISE_DBM; + hw->wiphy->interface_modes = + BIT(NL80211_IFTYPE_AP) | + BIT(NL80211_IFTYPE_STATION) | + BIT(NL80211_IFTYPE_ADHOC); + SET_IEEE80211_DEV(hw, &pdev->dev); pci_set_drvdata(pdev, hw); @@ -1414,6 +1550,10 @@ static void ath_pci_remove(struct pci_dev *pdev) static int ath_pci_suspend(struct pci_dev *pdev, pm_message_t state) { + struct ieee80211_hw *hw = pci_get_drvdata(pdev); + struct ath_softc *sc = hw->priv; + + ath9k_hw_set_gpio(sc->sc_ah, ATH_LED_PIN, 1); pci_save_state(pdev); pci_disable_device(pdev); pci_set_power_state(pdev, 3); @@ -1423,6 +1563,8 @@ static int ath_pci_suspend(struct pci_dev *pdev, pm_message_t state) static int ath_pci_resume(struct pci_dev *pdev) { + struct ieee80211_hw *hw = pci_get_drvdata(pdev); + struct ath_softc *sc = hw->priv; u32 val; int err; @@ -1439,6 +1581,11 @@ static int ath_pci_resume(struct pci_dev *pdev) if ((val & 0x0000ff00) != 0) pci_write_config_dword(pdev, 0x40, val & 0xffff00ff); + /* Enable LED */ + ath9k_hw_cfg_output(sc->sc_ah, ATH_LED_PIN, + AR_GPIO_OUTPUT_MUX_AS_OUTPUT); + ath9k_hw_set_gpio(sc->sc_ah, ATH_LED_PIN, 1); + return 0; } diff --git a/drivers/net/wireless/ath9k/phy.h b/drivers/net/wireless/ath9k/phy.h index 0cd399a5344..14702344448 100644 --- a/drivers/net/wireless/ath9k/phy.h +++ b/drivers/net/wireless/ath9k/phy.h @@ -18,19 +18,19 @@ #define PHY_H bool ath9k_hw_ar9280_set_channel(struct ath_hal *ah, - struct ath9k_channel - *chan); + struct ath9k_channel + *chan); bool ath9k_hw_set_channel(struct ath_hal *ah, - struct ath9k_channel *chan); + struct ath9k_channel *chan); void ath9k_hw_write_regs(struct ath_hal *ah, u32 modesIndex, u32 freqIndex, int regWrites); bool ath9k_hw_set_rf_regs(struct ath_hal *ah, - struct ath9k_channel *chan, - u16 modesIndex); + struct ath9k_channel *chan, + u16 modesIndex); void ath9k_hw_decrease_chain_power(struct ath_hal *ah, struct ath9k_channel *chan); bool ath9k_hw_init_rf(struct ath_hal *ah, - int *status); + int *status); #define AR_PHY_BASE 0x9800 #define AR_PHY(_n) (AR_PHY_BASE + ((_n)<<2)) diff --git a/drivers/net/wireless/ath9k/rc.c b/drivers/net/wireless/ath9k/rc.c index 73c460ad355..390019ed398 100644 --- a/drivers/net/wireless/ath9k/rc.c +++ b/drivers/net/wireless/ath9k/rc.c @@ -653,8 +653,8 @@ ath_rc_sib_init_validrates(struct ath_rate_node *ath_rc_priv, rate_ctrl = (struct ath_tx_ratectrl *)(ath_rc_priv); for (i = 0; i < rate_table->rate_cnt; i++) { valid = (ath_rc_priv->single_stream ? - rate_table->info[i].valid_single_stream : - rate_table->info[i].valid); + rate_table->info[i].valid_single_stream : + rate_table->info[i].valid); if (valid == TRUE) { u32 phy = rate_table->info[i].phy; u8 valid_rate_count = 0; @@ -740,14 +740,14 @@ ath_rc_sib_setvalid_htrates(struct ath_rate_node *ath_rc_priv, for (j = 0; j < rate_table->rate_cnt; j++) { u32 phy = rate_table->info[j].phy; u32 valid = (ath_rc_priv->single_stream ? - rate_table->info[j].valid_single_stream : - rate_table->info[j].valid); + rate_table->info[j].valid_single_stream : + rate_table->info[j].valid); if (((((struct ath_rateset *) - mcs_set)->rs_rates[i] & 0x7F) != - (rate_table->info[j].dot11rate & 0x7F)) || - !WLAN_RC_PHY_HT(phy) || - !WLAN_RC_PHY_HT_VALID(valid, capflag)) + mcs_set)->rs_rates[i] & 0x7F) != + (rate_table->info[j].dot11rate & 0x7F)) || + !WLAN_RC_PHY_HT(phy) || + !WLAN_RC_PHY_HT_VALID(valid, capflag)) continue; if (!ath_rc_valid_phyrate(phy, capflag, FALSE)) @@ -847,9 +847,9 @@ void ath_rate_newstate(struct ath_softc *sc, struct ath_vap *avp) /* For half and quarter rate channles use different * rate tables */ - if (sc->sc_curchan.channelFlags & CHANNEL_HALF) + if (sc->sc_ah->ah_curchan->channelFlags & CHANNEL_HALF) ar5416_sethalf_ratetable(asc); - else if (sc->sc_curchan.channelFlags & CHANNEL_QUARTER) + else if (sc->sc_ah->ah_curchan->channelFlags & CHANNEL_QUARTER) ar5416_setquarter_ratetable(asc); else /* full rate */ ar5416_setfull_ratetable(asc); @@ -866,10 +866,10 @@ void ath_rate_newstate(struct ath_softc *sc, struct ath_vap *avp) } static u8 ath_rc_ratefind_ht(struct ath_softc *sc, - struct ath_rate_node *ath_rc_priv, - const struct ath_rate_table *rate_table, - int probe_allowed, int *is_probing, - int is_retry) + struct ath_rate_node *ath_rc_priv, + const struct ath_rate_table *rate_table, + int probe_allowed, int *is_probing, + int is_retry) { u32 dt, best_thruput, this_thruput, now_msec; u8 rate, next_rate, best_rate, maxindex, minindex; @@ -997,8 +997,8 @@ static u8 ath_rc_ratefind_ht(struct ath_softc *sc, rate = rate_ctrl->rate_table_size - 1; ASSERT((rate_table->info[rate].valid && !ath_rc_priv->single_stream) || - (rate_table->info[rate].valid_single_stream && - ath_rc_priv->single_stream)); + (rate_table->info[rate].valid_single_stream && + ath_rc_priv->single_stream)); return rate; } @@ -1023,10 +1023,10 @@ static void ath_rc_rate_set_series(const struct ath_rate_table *rate_table , } static u8 ath_rc_rate_getidx(struct ath_softc *sc, - struct ath_rate_node *ath_rc_priv, - const struct ath_rate_table *rate_table, - u8 rix, u16 stepdown, - u16 min_rate) + struct ath_rate_node *ath_rc_priv, + const struct ath_rate_table *rate_table, + u8 rix, u16 stepdown, + u16 min_rate) { u32 j; u8 nextindex; @@ -1066,8 +1066,8 @@ static void ath_rc_ratefind(struct ath_softc *sc, rate_table = (struct ath_rate_table *)asc->hw_rate_table[sc->sc_curmode]; rix = ath_rc_ratefind_ht(sc, ath_rc_priv, rate_table, - (rcflag & ATH_RC_PROBE_ALLOWED) ? 1 : 0, - is_probe, is_retry); + (rcflag & ATH_RC_PROBE_ALLOWED) ? 1 : 0, + is_probe, is_retry); nrix = rix; if ((rcflag & ATH_RC_PROBE_ALLOWED) && (*is_probe)) { @@ -1099,13 +1099,13 @@ static void ath_rc_ratefind(struct ath_softc *sc, try_num = ((i + 1) == num_rates) ? num_tries - (try_per_rate * i) : try_per_rate ; min_rate = (((i + 1) == num_rates) && - (rcflag & ATH_RC_MINRATE_LASTRATE)) ? 1 : 0; + (rcflag & ATH_RC_MINRATE_LASTRATE)) ? 1 : 0; nrix = ath_rc_rate_getidx(sc, ath_rc_priv, - rate_table, nrix, 1, min_rate); + rate_table, nrix, 1, min_rate); /* All other rates in the series have RTS enabled */ ath_rc_rate_set_series(rate_table, - &series[i], try_num, nrix, TRUE); + &series[i], try_num, nrix, TRUE); } /* @@ -1124,13 +1124,13 @@ static void ath_rc_ratefind(struct ath_softc *sc, * above conditions. */ if ((sc->sc_curmode == ATH9K_MODE_11NG_HT20) || - (sc->sc_curmode == ATH9K_MODE_11NG_HT40PLUS) || - (sc->sc_curmode == ATH9K_MODE_11NG_HT40MINUS)) { + (sc->sc_curmode == ATH9K_MODE_11NG_HT40PLUS) || + (sc->sc_curmode == ATH9K_MODE_11NG_HT40MINUS)) { u8 dot11rate = rate_table->info[rix].dot11rate; u8 phy = rate_table->info[rix].phy; if (i == 4 && ((dot11rate == 2 && phy == WLAN_RC_PHY_HT_40_SS) || - (dot11rate == 3 && phy == WLAN_RC_PHY_HT_20_SS))) { + (dot11rate == 3 && phy == WLAN_RC_PHY_HT_20_SS))) { series[3].rix = series[2].rix; series[3].flags = series[2].flags; series[3].max_4ms_framelen = series[2].max_4ms_framelen; @@ -1141,18 +1141,19 @@ static void ath_rc_ratefind(struct ath_softc *sc, /* * Return the Tx rate series. */ -void ath_rate_findrate(struct ath_softc *sc, - struct ath_rate_node *ath_rc_priv, - int num_tries, - int num_rates, - unsigned int rcflag, - struct ath_rc_series series[], - int *is_probe, - int is_retry) +static void ath_rate_findrate(struct ath_softc *sc, + struct ath_rate_node *ath_rc_priv, + int num_tries, + int num_rates, + unsigned int rcflag, + struct ath_rc_series series[], + int *is_probe, + int is_retry) { struct ath_vap *avp = ath_rc_priv->avp; - DPRINTF(sc, ATH_DBG_RATE, "%s", __func__); + DPRINTF(sc, ATH_DBG_RATE, "%s\n", __func__); + if (!num_rates || !num_tries) return; @@ -1174,9 +1175,8 @@ void ath_rate_findrate(struct ath_softc *sc, unsigned int mcs; u8 series_rix = 0; - series[idx].tries = - IEEE80211_RATE_IDX_ENTRY( - avp->av_config.av_fixed_retryset, idx); + series[idx].tries = IEEE80211_RATE_IDX_ENTRY( + avp->av_config.av_fixed_retryset, idx); mcs = IEEE80211_RATE_IDX_ENTRY( avp->av_config.av_fixed_rateset, idx); @@ -1228,7 +1228,7 @@ static void ath_rc_update_ht(struct ath_softc *sc, u32 now_msec = jiffies_to_msecs(jiffies); int state_change = FALSE, rate, count; u8 last_per; - struct ath_rate_softc *asc = (struct ath_rate_softc *)sc->sc_rc; + struct ath_rate_softc *asc = (struct ath_rate_softc *)sc->sc_rc; struct ath_rate_table *rate_table = (struct ath_rate_table *)asc->hw_rate_table[sc->sc_curmode]; @@ -1272,14 +1272,14 @@ static void ath_rc_update_ht(struct ath_softc *sc, } else { /* xretries == 2 */ count = sizeof(nretry_to_per_lookup) / - sizeof(nretry_to_per_lookup[0]); + sizeof(nretry_to_per_lookup[0]); if (retries >= count) retries = count - 1; /* new_PER = 7/8*old_PER + 1/8*(currentPER) */ rate_ctrl->state[tx_rate].per = (u8)(rate_ctrl->state[tx_rate].per - - (rate_ctrl->state[tx_rate].per >> 3) + - ((100) >> 3)); + (rate_ctrl->state[tx_rate].per >> 3) + + ((100) >> 3)); } /* xretries == 1 or 2 */ @@ -1295,8 +1295,7 @@ static void ath_rc_update_ht(struct ath_softc *sc, if (retries >= count) retries = count - 1; if (info_priv->n_bad_frames) { - /* new_PER = 7/8*old_PER + 1/8*(currentPER) */ - /* + /* new_PER = 7/8*old_PER + 1/8*(currentPER) * Assuming that n_frames is not 0. The current PER * from the retries is 100 * retries / (retries+1), * since the first retries attempts failed, and the @@ -1386,7 +1385,7 @@ static void ath_rc_update_ht(struct ath_softc *sc, * rssi_ack values. */ if (tx_rate == rate_ctrl->rate_max_phy && - rate_ctrl->hw_maxretry_pktcnt < 255) { + rate_ctrl->hw_maxretry_pktcnt < 255) { rate_ctrl->hw_maxretry_pktcnt++; } @@ -1418,7 +1417,7 @@ static void ath_rc_update_ht(struct ath_softc *sc, /* Now reduce the current * rssi threshold. */ if ((rssi_ackAvg < rssi_thres + 2) && - (rssi_thres > rssi_ack_vmin)) { + (rssi_thres > rssi_ack_vmin)) { rate_ctrl->state[tx_rate]. rssi_thres--; } @@ -1436,10 +1435,10 @@ static void ath_rc_update_ht(struct ath_softc *sc, * a while (except if we are probing). */ if (rate_ctrl->state[tx_rate].per >= 55 && tx_rate > 0 && - rate_table->info[tx_rate].ratekbps <= - rate_table->info[rate_ctrl->rate_max_phy].ratekbps) { + rate_table->info[tx_rate].ratekbps <= + rate_table->info[rate_ctrl->rate_max_phy].ratekbps) { ath_rc_get_nextlowervalid_txrate(rate_table, rate_ctrl, - (u8) tx_rate, &rate_ctrl->rate_max_phy); + (u8) tx_rate, &rate_ctrl->rate_max_phy); /* Don't probe for a little while. */ rate_ctrl->probe_time = now_msec; @@ -1460,43 +1459,43 @@ static void ath_rc_update_ht(struct ath_softc *sc, break; if (rate_ctrl->state[rate].rssi_thres + - rate_table->info[rate].rssi_ack_deltamin > - rate_ctrl->state[rate+1].rssi_thres) { + rate_table->info[rate].rssi_ack_deltamin > + rate_ctrl->state[rate+1].rssi_thres) { rate_ctrl->state[rate+1].rssi_thres = rate_ctrl->state[rate]. - rssi_thres + + rssi_thres + rate_table->info[rate]. - rssi_ack_deltamin; + rssi_ack_deltamin; } } /* Make sure the rates below this have lower rssi thresholds. */ for (rate = tx_rate - 1; rate >= 0; rate--) { if (rate_table->info[rate].phy != - rate_table->info[tx_rate].phy) + rate_table->info[tx_rate].phy) break; if (rate_ctrl->state[rate].rssi_thres + - rate_table->info[rate].rssi_ack_deltamin > - rate_ctrl->state[rate+1].rssi_thres) { + rate_table->info[rate].rssi_ack_deltamin > + rate_ctrl->state[rate+1].rssi_thres) { if (rate_ctrl->state[rate+1].rssi_thres < - rate_table->info[rate]. - rssi_ack_deltamin) + rate_table->info[rate]. + rssi_ack_deltamin) rate_ctrl->state[rate].rssi_thres = 0; else { rate_ctrl->state[rate].rssi_thres = rate_ctrl->state[rate+1]. - rssi_thres - - rate_table->info[rate]. - rssi_ack_deltamin; + rssi_thres - + rate_table->info[rate]. + rssi_ack_deltamin; } if (rate_ctrl->state[rate].rssi_thres < - rate_table->info[rate]. - rssi_ack_validmin) { + rate_table->info[rate]. + rssi_ack_validmin) { rate_ctrl->state[rate].rssi_thres = rate_table->info[rate]. - rssi_ack_validmin; + rssi_ack_validmin; } } } @@ -1507,11 +1506,11 @@ static void ath_rc_update_ht(struct ath_softc *sc, if (rate_ctrl->state[tx_rate].per < last_per) { for (rate = tx_rate - 1; rate >= 0; rate--) { if (rate_table->info[rate].phy != - rate_table->info[tx_rate].phy) + rate_table->info[tx_rate].phy) break; if (rate_ctrl->state[rate].per > - rate_ctrl->state[rate+1].per) { + rate_ctrl->state[rate+1].per) { rate_ctrl->state[rate].per = rate_ctrl->state[rate+1].per; } @@ -1528,11 +1527,11 @@ static void ath_rc_update_ht(struct ath_softc *sc, /* Every so often, we reduce the thresholds and * PER (different for CCK and OFDM). */ if (now_msec - rate_ctrl->rssi_down_time >= - rate_table->rssi_reduce_interval) { + rate_table->rssi_reduce_interval) { for (rate = 0; rate < rate_ctrl->rate_table_size; rate++) { if (rate_ctrl->state[rate].rssi_thres > - rate_table->info[rate].rssi_ack_validmin) + rate_table->info[rate].rssi_ack_validmin) rate_ctrl->state[rate].rssi_thres -= 1; } rate_ctrl->rssi_down_time = now_msec; @@ -1541,7 +1540,7 @@ static void ath_rc_update_ht(struct ath_softc *sc, /* Every so often, we reduce the thresholds * and PER (different for CCK and OFDM). */ if (now_msec - rate_ctrl->per_down_time >= - rate_table->rssi_reduce_interval) { + rate_table->rssi_reduce_interval) { for (rate = 0; rate < rate_ctrl->rate_table_size; rate++) { rate_ctrl->state[rate].per = 7 * rate_ctrl->state[rate].per / 8; @@ -1560,7 +1559,7 @@ static void ath_rc_update(struct ath_softc *sc, struct ath_tx_info_priv *info_priv, int final_ts_idx, int xretries, int long_retry) { - struct ath_rate_softc *asc = (struct ath_rate_softc *)sc->sc_rc; + struct ath_rate_softc *asc = (struct ath_rate_softc *)sc->sc_rc; struct ath_rate_table *rate_table; struct ath_tx_ratectrl *rate_ctrl; struct ath_rc_series rcs[4]; @@ -1637,7 +1636,6 @@ static void ath_rc_update(struct ath_softc *sc, xretries, long_retry); } - /* * Process a tx descriptor for a completed transmit (success or failure). */ @@ -1651,13 +1649,13 @@ static void ath_rate_tx_complete(struct ath_softc *sc, struct ath_vap *avp; avp = rc_priv->avp; - if ((avp->av_config.av_fixed_rateset != IEEE80211_FIXED_RATE_NONE) - || info_priv->tx.ts_status & ATH9K_TXERR_FILT) + if ((avp->av_config.av_fixed_rateset != IEEE80211_FIXED_RATE_NONE) || + (info_priv->tx.ts_status & ATH9K_TXERR_FILT)) return; if (info_priv->tx.ts_rssi > 0) { ATH_RSSI_LPF(an->an_chainmask_sel.tx_avgrssi, - info_priv->tx.ts_rssi); + info_priv->tx.ts_rssi); } /* @@ -1682,7 +1680,6 @@ static void ath_rate_tx_complete(struct ath_softc *sc, info_priv->tx.ts_longretry); } - /* * Update the SIB's rate control information * @@ -1701,8 +1698,8 @@ static void ath_rc_sib_update(struct ath_softc *sc, struct ath_rate_softc *asc = (struct ath_rate_softc *)sc->sc_rc; struct ath_rateset *rateset = negotiated_rates; u8 *ht_mcs = (u8 *)negotiated_htrates; - struct ath_tx_ratectrl *rate_ctrl = (struct ath_tx_ratectrl *) - (ath_rc_priv); + struct ath_tx_ratectrl *rate_ctrl = + (struct ath_tx_ratectrl *)ath_rc_priv; u8 i, j, k, hi = 0, hthi = 0; rate_table = (struct ath_rate_table *) @@ -1824,7 +1821,8 @@ static void ath_setup_rates(struct ieee80211_local *local, struct sta_info *sta) struct ath_rate_node *rc_priv = sta->rate_ctrl_priv; int i, j = 0; - DPRINTF(sc, ATH_DBG_RATE, "%s", __func__); + DPRINTF(sc, ATH_DBG_RATE, "%s\n", __func__); + sband = local->hw.wiphy->bands[local->hw.conf.channel->band]; for (i = 0; i < sband->n_bitrates; i++) { if (sta->supp_rates[local->hw.conf.channel->band] & BIT(i)) { @@ -1903,7 +1901,7 @@ static void ath_tx_aggr_resp(struct ath_softc *sc, int state; DECLARE_MAC_BUF(mac); - if (!sc->sc_txaggr) + if (!(sc->sc_flags & SC_OP_TXAGGR)) return; txtid = ATH_AN_2_TID(an, tidno); @@ -1944,7 +1942,7 @@ static void ath_get_rate(void *priv, struct net_device *dev, struct ath_rate_node *ath_rc_priv; struct ath_node *an; struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb); - int is_probe, chk, ret; + int is_probe = FALSE, chk, ret; s8 lowest_idx; __le16 fc = hdr->frame_control; u8 *qc, tid; @@ -1962,7 +1960,7 @@ static void ath_get_rate(void *priv, struct net_device *dev, tx_info_priv->min_rate = (sband->bitrates[lowest_idx].bitrate * 2) / 10; /* lowest rate for management and multicast/broadcast frames */ if (!ieee80211_is_data(fc) || - is_multicast_ether_addr(hdr->addr1) || !sta) { + is_multicast_ether_addr(hdr->addr1) || !sta) { sel->rate_idx = lowest_idx; return; } @@ -1978,7 +1976,7 @@ static void ath_get_rate(void *priv, struct net_device *dev, false); if (is_probe) sel->probe_idx = ((struct ath_tx_ratectrl *) - sta->rate_ctrl_priv)->probe_rate; + sta->rate_ctrl_priv)->probe_rate; /* Ratecontrol sometimes returns invalid rate index */ if (tx_info_priv->rcs[0].rix != 0xff) @@ -2035,6 +2033,7 @@ static void ath_rate_init(void *priv, void *priv_sta, struct ieee80211_hw *hw = local_to_hw(local); struct ieee80211_conf *conf = &local->hw.conf; struct ath_softc *sc = hw->priv; + struct ath_rate_node *ath_rc_priv = priv_sta; int i, j = 0; DPRINTF(sc, ATH_DBG_RATE, "%s\n", __func__); @@ -2046,12 +2045,11 @@ static void ath_rate_init(void *priv, void *priv_sta, if (conf->flags & IEEE80211_CONF_SUPPORT_HT_MODE) { for (i = 0; i < MCS_SET_SIZE; i++) { if (conf->ht_conf.supp_mcs_set[i/8] & (1<<(i%8))) - ((struct ath_rate_node *) - priv_sta)->neg_ht_rates.rs_rates[j++] = i; + ath_rc_priv->neg_ht_rates.rs_rates[j++] = i; if (j == ATH_RATE_MAX) break; } - ((struct ath_rate_node *)priv_sta)->neg_ht_rates.rs_nrates = j; + ath_rc_priv->neg_ht_rates.rs_nrates = j; } ath_rc_node_update(hw, priv_sta); } @@ -2066,7 +2064,7 @@ static void *ath_rate_alloc(struct ieee80211_local *local) struct ieee80211_hw *hw = local_to_hw(local); struct ath_softc *sc = hw->priv; - DPRINTF(sc, ATH_DBG_RATE, "%s", __func__); + DPRINTF(sc, ATH_DBG_RATE, "%s\n", __func__); return local->hw.priv; } @@ -2081,14 +2079,17 @@ static void *ath_rate_alloc_sta(void *priv, gfp_t gfp) struct ath_vap *avp = sc->sc_vaps[0]; struct ath_rate_node *rate_priv; - DPRINTF(sc, ATH_DBG_RATE, "%s", __func__); + DPRINTF(sc, ATH_DBG_RATE, "%s\n", __func__); + rate_priv = ath_rate_node_alloc(avp, sc->sc_rc, gfp); if (!rate_priv) { - DPRINTF(sc, ATH_DBG_FATAL, "%s:Unable to allocate" - "private rate control structure", __func__); + DPRINTF(sc, ATH_DBG_FATAL, + "%s: Unable to allocate private rc structure\n", + __func__); return NULL; } ath_rc_sib_init(rate_priv); + return rate_priv; } diff --git a/drivers/net/wireless/ath9k/rc.h b/drivers/net/wireless/ath9k/rc.h index 71aef9c7523..b95b41508b9 100644 --- a/drivers/net/wireless/ath9k/rc.h +++ b/drivers/net/wireless/ath9k/rc.h @@ -71,9 +71,6 @@ enum ieee80211_fixed_rate_mode { */ #define IEEE80211_RATE_IDX_ENTRY(val, idx) (((val&(0xff<<(idx*8)))>>(idx*8))) -#define SHORT_PRE 1 -#define LONG_PRE 0 - #define WLAN_PHY_HT_20_SS WLAN_RC_PHY_HT_20_SS #define WLAN_PHY_HT_20_DS WLAN_RC_PHY_HT_20_DS #define WLAN_PHY_HT_20_DS_HGI WLAN_RC_PHY_HT_20_DS_HGI @@ -102,18 +99,18 @@ enum { WLAN_RC_PHY_MAX }; -#define WLAN_RC_PHY_DS(_phy) ((_phy == WLAN_RC_PHY_HT_20_DS) \ - || (_phy == WLAN_RC_PHY_HT_40_DS) \ - || (_phy == WLAN_RC_PHY_HT_20_DS_HGI) \ - || (_phy == WLAN_RC_PHY_HT_40_DS_HGI)) -#define WLAN_RC_PHY_40(_phy) ((_phy == WLAN_RC_PHY_HT_40_SS) \ - || (_phy == WLAN_RC_PHY_HT_40_DS) \ - || (_phy == WLAN_RC_PHY_HT_40_SS_HGI) \ - || (_phy == WLAN_RC_PHY_HT_40_DS_HGI)) +#define WLAN_RC_PHY_DS(_phy) ((_phy == WLAN_RC_PHY_HT_20_DS) \ + || (_phy == WLAN_RC_PHY_HT_40_DS) \ + || (_phy == WLAN_RC_PHY_HT_20_DS_HGI) \ + || (_phy == WLAN_RC_PHY_HT_40_DS_HGI)) +#define WLAN_RC_PHY_40(_phy) ((_phy == WLAN_RC_PHY_HT_40_SS) \ + || (_phy == WLAN_RC_PHY_HT_40_DS) \ + || (_phy == WLAN_RC_PHY_HT_40_SS_HGI) \ + || (_phy == WLAN_RC_PHY_HT_40_DS_HGI)) #define WLAN_RC_PHY_SGI(_phy) ((_phy == WLAN_RC_PHY_HT_20_SS_HGI) \ - || (_phy == WLAN_RC_PHY_HT_20_DS_HGI) \ - || (_phy == WLAN_RC_PHY_HT_40_SS_HGI) \ - || (_phy == WLAN_RC_PHY_HT_40_DS_HGI)) + || (_phy == WLAN_RC_PHY_HT_20_DS_HGI) \ + || (_phy == WLAN_RC_PHY_HT_40_SS_HGI) \ + || (_phy == WLAN_RC_PHY_HT_40_DS_HGI)) #define WLAN_RC_PHY_HT(_phy) (_phy >= WLAN_RC_PHY_HT_20_SS) @@ -135,56 +132,59 @@ enum { #define WLAN_RC_SGI_FLAG (0x04) #define WLAN_RC_HT_FLAG (0x08) -/* Index into the rate table */ -#define INIT_RATE_MAX_20 23 -#define INIT_RATE_MAX_40 40 - #define RATE_TABLE_SIZE 64 -/* XXX: Convert to kdoc */ +/** + * struct ath_rate_table - Rate Control table + * @valid: valid for use in rate control + * @valid_single_stream: valid for use in rate control for + * single stream operation + * @phy: CCK/OFDM + * @ratekbps: rate in Kbits per second + * @user_ratekbps: user rate in Kbits per second + * @ratecode: rate that goes into HW descriptors + * @short_preamble: Mask for enabling short preamble in ratecode for CCK + * @dot11rate: value that goes into supported + * rates info element of MLME + * @ctrl_rate: Index of next lower basic rate, used for duration computation + * @max_4ms_framelen: maximum frame length(bytes) for tx duration + * @probe_interval: interval for rate control to probe for other rates + * @rssi_reduce_interval: interval for rate control to reduce rssi + * @initial_ratemax: initial ratemax value used in ath_rc_sib_update() + */ struct ath_rate_table { int rate_cnt; struct { - int valid; /* Valid for use in rate control */ - int valid_single_stream;/* Valid for use in rate control - for single stream operation */ - u8 phy; /* CCK/OFDM/TURBO/XR */ - u32 ratekbps; /* Rate in Kbits per second */ - u32 user_ratekbps; /* User rate in KBits per second */ - u8 ratecode; /* rate that goes into - hw descriptors */ - u8 short_preamble; /* Mask for enabling short preamble - in rate code for CCK */ - u8 dot11rate; /* Value that goes into supported - rates info element of MLME */ - u8 ctrl_rate; /* Index of next lower basic rate, - used for duration computation */ - int8_t rssi_ack_validmin; /* Rate control related */ - int8_t rssi_ack_deltamin; /* Rate control related */ - u8 base_index; /* base rate index */ - u8 cw40index; /* 40cap rate index */ - u8 sgi_index; /* shortgi rate index */ - u8 ht_index; /* shortgi rate index */ - u32 max_4ms_framelen; /* Maximum frame length(bytes) - for 4ms tx duration */ + int valid; + int valid_single_stream; + u8 phy; + u32 ratekbps; + u32 user_ratekbps; + u8 ratecode; + u8 short_preamble; + u8 dot11rate; + u8 ctrl_rate; + int8_t rssi_ack_validmin; + int8_t rssi_ack_deltamin; + u8 base_index; + u8 cw40index; + u8 sgi_index; + u8 ht_index; + u32 max_4ms_framelen; } info[RATE_TABLE_SIZE]; - u32 probe_interval; /* interval for ratectrl to - probe for other rates */ - u32 rssi_reduce_interval; /* interval for ratectrl - to reduce RSSI */ - u8 initial_ratemax; /* the initial ratemax value used - in ath_rc_sib_update() */ + u32 probe_interval; + u32 rssi_reduce_interval; + u8 initial_ratemax; }; #define ATH_RC_PROBE_ALLOWED 0x00000001 #define ATH_RC_MINRATE_LASTRATE 0x00000002 -#define ATH_RC_SHORT_PREAMBLE 0x00000004 struct ath_rc_series { - u8 rix; - u8 tries; - u8 flags; - u32 max_4ms_framelen; + u8 rix; + u8 tries; + u8 flags; + u32 max_4ms_framelen; }; /* rcs_flags definition */ @@ -201,42 +201,56 @@ struct ath_rc_series { #define MAX_TX_RATE_PHY 48 struct ath_tx_ratectrl_state { - int8_t rssi_thres; /* required rssi for this rate (dB) */ - u8 per; /* recent estimate of packet error rate (%) */ + int8_t rssi_thres; /* required rssi for this rate (dB) */ + u8 per; /* recent estimate of packet error rate (%) */ }; +/** + * struct ath_tx_ratectrl - TX Rate control Information + * @state: RC state + * @rssi_last: last ACK rssi + * @rssi_last_lookup: last ACK rssi used for lookup + * @rssi_last_prev: previous last ACK rssi + * @rssi_last_prev2: 2nd previous last ACK rssi + * @rssi_sum_cnt: count of rssi_sum for averaging + * @rssi_sum_rate: rate that we are averaging + * @rssi_sum: running sum of rssi for averaging + * @probe_rate: rate we are probing at + * @rssi_time: msec timestamp for last ack rssi + * @rssi_down_time: msec timestamp for last down step + * @probe_time: msec timestamp for last probe + * @hw_maxretry_pktcnt: num of packets since we got HW max retry error + * @max_valid_rate: maximum number of valid rate + * @per_down_time: msec timestamp for last PER down step + * @valid_phy_ratecnt: valid rate count + * @rate_max_phy: phy index for the max rate + * @probe_interval: interval for ratectrl to probe for other rates + */ struct ath_tx_ratectrl { - struct ath_tx_ratectrl_state state[MAX_TX_RATE_TBL]; /* state */ - int8_t rssi_last; /* last ack rssi */ - int8_t rssi_last_lookup; /* last ack rssi used for lookup */ - int8_t rssi_last_prev; /* previous last ack rssi */ - int8_t rssi_last_prev2; /* 2nd previous last ack rssi */ - int32_t rssi_sum_cnt; /* count of rssi_sum for averaging */ - int32_t rssi_sum_rate; /* rate that we are averaging */ - int32_t rssi_sum; /* running sum of rssi for averaging */ - u32 valid_txrate_mask; /* mask of valid rates */ - u8 rate_table_size; /* rate table size */ - u8 rate_max; /* max rate that has recently worked */ - u8 probe_rate; /* rate we are probing at */ - u32 rssi_time; /* msec timestamp for last ack rssi */ - u32 rssi_down_time; /* msec timestamp for last down step */ - u32 probe_time; /* msec timestamp for last probe */ - u8 hw_maxretry_pktcnt; /* num packets since we got - HW max retry error */ - u8 max_valid_rate; /* maximum number of valid rate */ - u8 valid_rate_index[MAX_TX_RATE_TBL]; /* valid rate index */ - u32 per_down_time; /* msec timstamp for last - PER down step */ + struct ath_tx_ratectrl_state state[MAX_TX_RATE_TBL]; + int8_t rssi_last; + int8_t rssi_last_lookup; + int8_t rssi_last_prev; + int8_t rssi_last_prev2; + int32_t rssi_sum_cnt; + int32_t rssi_sum_rate; + int32_t rssi_sum; + u8 rate_table_size; + u8 probe_rate; + u32 rssi_time; + u32 rssi_down_time; + u32 probe_time; + u8 hw_maxretry_pktcnt; + u8 max_valid_rate; + u8 valid_rate_index[MAX_TX_RATE_TBL]; + u32 per_down_time; /* 11n state */ - u8 valid_phy_ratecnt[WLAN_RC_PHY_MAX]; /* valid rate count */ - u8 valid_phy_rateidx[WLAN_RC_PHY_MAX][MAX_TX_RATE_TBL]; - u8 rc_phy_mode; - u8 rate_max_phy; /* Phy index for the max rate */ - u32 rate_max_lastused; /* msec timstamp of when we - last used rateMaxPhy */ - u32 probe_interval; /* interval for ratectrl to probe - for other rates */ + u8 valid_phy_ratecnt[WLAN_RC_PHY_MAX]; + u8 valid_phy_rateidx[WLAN_RC_PHY_MAX][MAX_TX_RATE_TBL]; + u8 rc_phy_mode; + u8 rate_max_phy; + u32 probe_interval; }; struct ath_rateset { @@ -248,29 +262,32 @@ struct ath_rateset { struct ath_rate_softc { /* phy tables that contain rate control data */ const void *hw_rate_table[ATH9K_MODE_MAX]; - int fixedrix; /* -1 or index of fixed rate */ + + /* -1 or index of fixed rate */ + int fixedrix; }; /* per-node state */ struct ath_rate_node { - struct ath_tx_ratectrl tx_ratectrl; /* rate control state proper */ - u32 prev_data_rix; /* rate idx of last data frame */ + struct ath_tx_ratectrl tx_ratectrl; - /* map of rate ix -> negotiated rate set ix */ - u8 rixmap[MAX_TX_RATE_TBL]; + /* rate idx of last data frame */ + u32 prev_data_rix; - /* map of ht rate ix -> negotiated rate set ix */ - u8 ht_rixmap[MAX_TX_RATE_TBL]; + /* ht capabilities */ + u8 ht_cap; - u8 ht_cap; /* ht capabilities */ - u8 ant_tx; /* current transmit antenna */ + /* When TRUE, only single stream Tx possible */ + u8 single_stream; - u8 single_stream; /* When TRUE, only single - stream Tx possible */ - struct ath_rateset neg_rates; /* Negotiated rates */ - struct ath_rateset neg_ht_rates; /* Negotiated HT rates */ - struct ath_rate_softc *asc; /* back pointer to atheros softc */ - struct ath_vap *avp; /* back pointer to vap */ + /* Negotiated rates */ + struct ath_rateset neg_rates; + + /* Negotiated HT rates */ + struct ath_rateset neg_ht_rates; + + struct ath_rate_softc *asc; + struct ath_vap *avp; }; /* Driver data of ieee80211_tx_info */ @@ -297,17 +314,10 @@ void ath_rc_node_update(struct ieee80211_hw *hw, struct ath_rate_node *rc_priv); void ath_rate_newstate(struct ath_softc *sc, struct ath_vap *avp); /* - * Return the tx rate series. - */ -void ath_rate_findrate(struct ath_softc *sc, struct ath_rate_node *ath_rc_priv, - int num_tries, int num_rates, - unsigned int rcflag, struct ath_rc_series[], - int *is_probe, int isretry); -/* * Return rate index for given Dot11 Rate. */ u8 ath_rate_findrateix(struct ath_softc *sc, - u8 dot11_rate); + u8 dot11_rate); /* Routines to register/unregister rate control algorithm */ int ath_rate_control_register(void); diff --git a/drivers/net/wireless/ath9k/recv.c b/drivers/net/wireless/ath9k/recv.c index 20ddb7acdb9..498256309ab 100644 --- a/drivers/net/wireless/ath9k/recv.c +++ b/drivers/net/wireless/ath9k/recv.c @@ -184,7 +184,7 @@ static int ath_ampdu_input(struct ath_softc *sc, tid = qc[0] & 0xf; } - if (sc->sc_opmode == ATH9K_M_STA) { + if (sc->sc_ah->ah_opmode == ATH9K_M_STA) { /* Drop the frame not belonging to me. */ if (memcmp(hdr->addr1, sc->sc_myaddr, ETH_ALEN)) { dev_kfree_skb(skb); @@ -449,17 +449,16 @@ static int ath_rx_indicate(struct ath_softc *sc, int type; /* indicate frame to the stack, which will free the old skb. */ - type = ath__rx_indicate(sc, skb, status, keyix); + type = _ath_rx_indicate(sc, skb, status, keyix); /* allocate a new skb and queue it to for H/W processing */ nskb = ath_rxbuf_alloc(sc, sc->sc_rxbufsize); if (nskb != NULL) { bf->bf_mpdu = nskb; - bf->bf_buf_addr = ath_skb_map_single(sc, - nskb, - PCI_DMA_FROMDEVICE, - /* XXX: Remove get_dma_mem_context() */ - get_dma_mem_context(bf, bf_dmacontext)); + bf->bf_buf_addr = pci_map_single(sc->pdev, nskb->data, + skb_end_pointer(nskb) - nskb->head, + PCI_DMA_FROMDEVICE); + bf->bf_dmacontext = bf->bf_buf_addr; ATH_RX_CONTEXT(nskb)->ctx_rxbuf = bf; /* queue the new wbuf to H/W */ @@ -505,7 +504,7 @@ int ath_rx_init(struct ath_softc *sc, int nbufs) do { spin_lock_init(&sc->sc_rxflushlock); - sc->sc_rxflush = 0; + sc->sc_flags &= ~SC_OP_RXFLUSH; spin_lock_init(&sc->sc_rxbuflock); /* @@ -542,9 +541,10 @@ int ath_rx_init(struct ath_softc *sc, int nbufs) } bf->bf_mpdu = skb; - bf->bf_buf_addr = - ath_skb_map_single(sc, skb, PCI_DMA_FROMDEVICE, - get_dma_mem_context(bf, bf_dmacontext)); + bf->bf_buf_addr = pci_map_single(sc->pdev, skb->data, + skb_end_pointer(skb) - skb->head, + PCI_DMA_FROMDEVICE); + bf->bf_dmacontext = bf->bf_buf_addr; ATH_RX_CONTEXT(skb)->ctx_rxbuf = bf; } sc->sc_rxlink = NULL; @@ -598,6 +598,7 @@ void ath_rx_cleanup(struct ath_softc *sc) u32 ath_calcrxfilter(struct ath_softc *sc) { #define RX_FILTER_PRESERVE (ATH9K_RX_FILTER_PHYERR | ATH9K_RX_FILTER_PHYRADAR) + u32 rfilt; rfilt = (ath9k_hw_getrxfilter(sc->sc_ah) & RX_FILTER_PRESERVE) @@ -605,25 +606,29 @@ u32 ath_calcrxfilter(struct ath_softc *sc) | ATH9K_RX_FILTER_MCAST; /* If not a STA, enable processing of Probe Requests */ - if (sc->sc_opmode != ATH9K_M_STA) + if (sc->sc_ah->ah_opmode != ATH9K_M_STA) rfilt |= ATH9K_RX_FILTER_PROBEREQ; /* Can't set HOSTAP into promiscous mode */ - if (sc->sc_opmode == ATH9K_M_MONITOR) { + if (((sc->sc_ah->ah_opmode != ATH9K_M_HOSTAP) && + (sc->rx_filter & FIF_PROMISC_IN_BSS)) || + (sc->sc_ah->ah_opmode == ATH9K_M_MONITOR)) { rfilt |= ATH9K_RX_FILTER_PROM; /* ??? To prevent from sending ACK */ rfilt &= ~ATH9K_RX_FILTER_UCAST; } - if (sc->sc_opmode == ATH9K_M_STA || sc->sc_opmode == ATH9K_M_IBSS || - sc->sc_scanning) + if (((sc->sc_ah->ah_opmode == ATH9K_M_STA) && + (sc->rx_filter & FIF_BCN_PRBRESP_PROMISC)) || + (sc->sc_ah->ah_opmode == ATH9K_M_IBSS)) rfilt |= ATH9K_RX_FILTER_BEACON; /* If in HOSTAP mode, want to enable reception of PSPOLL frames & beacon frames */ - if (sc->sc_opmode == ATH9K_M_HOSTAP) + if (sc->sc_ah->ah_opmode == ATH9K_M_HOSTAP) rfilt |= (ATH9K_RX_FILTER_BEACON | ATH9K_RX_FILTER_PSPOLL); return rfilt; + #undef RX_FILTER_PRESERVE } @@ -703,11 +708,11 @@ void ath_flushrecv(struct ath_softc *sc) * progress (see references to sc_rxflush) */ spin_lock_bh(&sc->sc_rxflushlock); - sc->sc_rxflush = 1; + sc->sc_flags |= SC_OP_RXFLUSH; ath_rx_tasklet(sc, 1); - sc->sc_rxflush = 0; + sc->sc_flags &= ~SC_OP_RXFLUSH; spin_unlock_bh(&sc->sc_rxflushlock); } @@ -720,7 +725,7 @@ int ath_rx_input(struct ath_softc *sc, struct ath_recv_status *rx_status, enum ATH_RX_TYPE *status) { - if (is_ampdu && sc->sc_rxaggr) { + if (is_ampdu && (sc->sc_flags & SC_OP_RXAGGR)) { *status = ATH_RX_CONSUMED; return ath_ampdu_input(sc, an, skb, rx_status); } else { @@ -751,7 +756,7 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush) do { /* If handling rx interrupt and flush is in progress => exit */ - if (sc->sc_rxflush && (flush == 0)) + if ((sc->sc_flags & SC_OP_RXFLUSH) && (flush == 0)) break; spin_lock_bh(&sc->sc_rxbuflock); @@ -901,7 +906,7 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush) * Enable this if you want to see * error frames in Monitor mode. */ - if (sc->sc_opmode != ATH9K_M_MONITOR) + if (sc->sc_ah->ah_opmode != ATH9K_M_MONITOR) goto rx_next; #endif /* fall thru for monitor mode handling... */ @@ -946,7 +951,7 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush) * decryption and MIC failures. For monitor mode, * we also ignore the CRC error. */ - if (sc->sc_opmode == ATH9K_M_MONITOR) { + if (sc->sc_ah->ah_opmode == ATH9K_M_MONITOR) { if (ds->ds_rxstat.rs_status & ~(ATH9K_RXERR_DECRYPT | ATH9K_RXERR_MIC | ATH9K_RXERR_CRC)) @@ -1090,7 +1095,7 @@ rx_next: "%s: Reset rx chain mask. " "Do internal reset\n", __func__); ASSERT(flush == 0); - ath_internal_reset(sc); + ath_reset(sc, false); } return 0; @@ -1128,7 +1133,7 @@ int ath_rx_aggr_start(struct ath_softc *sc, rxtid = &an->an_aggr.rx.tid[tid]; spin_lock_bh(&rxtid->tidlock); - if (sc->sc_rxaggr) { + if (sc->sc_flags & SC_OP_RXAGGR) { /* Allow aggregation reception * Adjust rx BA window size. Peer might indicate a * zero buffer size for a _dont_care_ condition. @@ -1228,7 +1233,7 @@ void ath_rx_aggr_teardown(struct ath_softc *sc, void ath_rx_node_init(struct ath_softc *sc, struct ath_node *an) { - if (sc->sc_rxaggr) { + if (sc->sc_flags & SC_OP_RXAGGR) { struct ath_arx_tid *rxtid; int tidno; @@ -1260,7 +1265,7 @@ void ath_rx_node_init(struct ath_softc *sc, struct ath_node *an) void ath_rx_node_cleanup(struct ath_softc *sc, struct ath_node *an) { - if (sc->sc_rxaggr) { + if (sc->sc_flags & SC_OP_RXAGGR) { struct ath_arx_tid *rxtid; int tidno, i; @@ -1293,27 +1298,3 @@ void ath_rx_node_free(struct ath_softc *sc, struct ath_node *an) { ath_rx_node_cleanup(sc, an); } - -dma_addr_t ath_skb_map_single(struct ath_softc *sc, - struct sk_buff *skb, - int direction, - dma_addr_t *pa) -{ - /* - * NB: do NOT use skb->len, which is 0 on initialization. - * Use skb's entire data area instead. - */ - *pa = pci_map_single(sc->pdev, skb->data, - skb_end_pointer(skb) - skb->head, direction); - return *pa; -} - -void ath_skb_unmap_single(struct ath_softc *sc, - struct sk_buff *skb, - int direction, - dma_addr_t *pa) -{ - /* Unmap skb's entire data area */ - pci_unmap_single(sc->pdev, *pa, - skb_end_pointer(skb) - skb->head, direction); -} diff --git a/drivers/net/wireless/ath9k/reg.h b/drivers/net/wireless/ath9k/reg.h index 42b0890a468..60617ae6620 100644 --- a/drivers/net/wireless/ath9k/reg.h +++ b/drivers/net/wireless/ath9k/reg.h @@ -899,12 +899,6 @@ enum { #define AR_GPIO_OUTPUT_MUX2 0x4064 #define AR_GPIO_OUTPUT_MUX3 0x4068 -#define AR_GPIO_OUTPUT_MUX_AS_OUTPUT 0 -#define AR_GPIO_OUTPUT_MUX_AS_PCIE_ATTENTION_LED 1 -#define AR_GPIO_OUTPUT_MUX_AS_PCIE_POWER_LED 2 -#define AR_GPIO_OUTPUT_MUX_AS_MAC_NETWORK_LED 5 -#define AR_GPIO_OUTPUT_MUX_AS_MAC_POWER_LED 6 - #define AR_INPUT_STATE 0x406c #define AR_EEPROM_STATUS_DATA 0x407c diff --git a/drivers/net/wireless/ath9k/xmit.c b/drivers/net/wireless/ath9k/xmit.c index 550129f717e..3fc6641e8bf 100644 --- a/drivers/net/wireless/ath9k/xmit.c +++ b/drivers/net/wireless/ath9k/xmit.c @@ -60,79 +60,6 @@ static u32 bits_per_symbol[][2] = { #define IS_HT_RATE(_rate) ((_rate) & 0x80) /* - * Insert a chain of ath_buf (descriptors) on a multicast txq - * but do NOT start tx DMA on this queue. - * NB: must be called with txq lock held - */ - -static void ath_tx_mcastqaddbuf(struct ath_softc *sc, - struct ath_txq *txq, - struct list_head *head) -{ - struct ath_hal *ah = sc->sc_ah; - struct ath_buf *bf; - - if (list_empty(head)) - return; - - /* - * Insert the frame on the outbound list and - * pass it on to the hardware. - */ - bf = list_first_entry(head, struct ath_buf, list); - - /* - * The CAB queue is started from the SWBA handler since - * frames only go out on DTIM and to avoid possible races. - */ - ath9k_hw_set_interrupts(ah, 0); - - /* - * If there is anything in the mcastq, we want to set - * the "more data" bit in the last item in the queue to - * indicate that there is "more data". It makes sense to add - * it here since you are *always* going to have - * more data when adding to this queue, no matter where - * you call from. - */ - - if (txq->axq_depth) { - struct ath_buf *lbf; - struct ieee80211_hdr *hdr; - - /* - * Add the "more data flag" to the last frame - */ - - lbf = list_entry(txq->axq_q.prev, struct ath_buf, list); - hdr = (struct ieee80211_hdr *) - ((struct sk_buff *)(lbf->bf_mpdu))->data; - hdr->frame_control |= cpu_to_le16(IEEE80211_FCTL_MOREDATA); - } - - /* - * Now, concat the frame onto the queue - */ - list_splice_tail_init(head, &txq->axq_q); - txq->axq_depth++; - txq->axq_totalqueued++; - txq->axq_linkbuf = list_entry(txq->axq_q.prev, struct ath_buf, list); - - DPRINTF(sc, ATH_DBG_QUEUE, - "%s: txq depth = %d\n", __func__, txq->axq_depth); - if (txq->axq_link != NULL) { - *txq->axq_link = bf->bf_daddr; - DPRINTF(sc, ATH_DBG_XMIT, - "%s: link[%u](%p)=%llx (%p)\n", - __func__, - txq->axq_qnum, txq->axq_link, - ito64(bf->bf_daddr), bf->bf_desc); - } - txq->axq_link = &(bf->bf_lastbf->bf_desc->ds_link); - ath9k_hw_set_interrupts(ah, sc->sc_imask); -} - -/* * Insert a chain of ath_buf (descriptors) on a txq and * assume the descriptors are already chained together by caller. * NB: must be called with txq lock held @@ -277,8 +204,6 @@ static int ath_tx_prepare(struct ath_softc *sc, __le16 fc; u8 *qc; - memset(txctl, 0, sizeof(struct ath_tx_control)); - txctl->dev = sc; hdr = (struct ieee80211_hdr *)skb->data; hdrlen = ieee80211_get_hdrlen_from_skb(skb); @@ -302,7 +227,6 @@ static int ath_tx_prepare(struct ath_softc *sc, } txctl->if_id = 0; - txctl->nextfraglen = 0; txctl->frmlen = skb->len + FCS_LEN - (hdrlen & 3); txctl->txpower = MAX_RATE_POWER; /* FIXME */ @@ -329,12 +253,18 @@ static int ath_tx_prepare(struct ath_softc *sc, /* Fill qnum */ - txctl->qnum = ath_get_hal_qnum(skb_get_queue_mapping(skb), sc); - txq = &sc->sc_txq[txctl->qnum]; + if (unlikely(txctl->flags & ATH9K_TXDESC_CAB)) { + txctl->qnum = 0; + txq = sc->sc_cabq; + } else { + txctl->qnum = ath_get_hal_qnum(skb_get_queue_mapping(skb), sc); + txq = &sc->sc_txq[txctl->qnum]; + } spin_lock_bh(&txq->axq_lock); /* Try to avoid running out of descriptors */ - if (txq->axq_depth >= (ATH_TXBUF - 20)) { + if (txq->axq_depth >= (ATH_TXBUF - 20) && + !(txctl->flags & ATH9K_TXDESC_CAB)) { DPRINTF(sc, ATH_DBG_FATAL, "%s: TX queue: %d is full, depth: %d\n", __func__, @@ -354,7 +284,7 @@ static int ath_tx_prepare(struct ath_softc *sc, /* Fill flags */ - txctl->flags = ATH9K_TXDESC_CLRDMASK; /* needed for crypto errors */ + txctl->flags |= ATH9K_TXDESC_CLRDMASK; /* needed for crypto errors */ if (tx_info->flags & IEEE80211_TX_CTL_NO_ACK) txctl->flags |= ATH9K_TXDESC_NOACK; @@ -392,7 +322,7 @@ static int ath_tx_prepare(struct ath_softc *sc, * incremented by the fragmentation routine. */ if (likely(!(txctl->flags & ATH9K_TXDESC_FRAG_IS_ON)) && - txctl->ht && sc->sc_txaggr) { + txctl->ht && (sc->sc_flags & SC_OP_TXAGGR)) { struct ath_atx_tid *tid; tid = ATH_AN_2_TID(txctl->an, txctl->tidno); @@ -413,50 +343,18 @@ static int ath_tx_prepare(struct ath_softc *sc, } rix = rcs[0].rix; - /* - * Calculate duration. This logically belongs in the 802.11 - * layer but it lacks sufficient information to calculate it. - */ - if ((txctl->flags & ATH9K_TXDESC_NOACK) == 0 && !ieee80211_is_ctl(fc)) { - u16 dur; + if (ieee80211_has_morefrags(fc) || + (le16_to_cpu(hdr->seq_ctrl) & IEEE80211_SCTL_FRAG)) { /* - * XXX not right with fragmentation. - */ - if (sc->sc_flags & ATH_PREAMBLE_SHORT) - dur = rt->info[rix].spAckDuration; - else - dur = rt->info[rix].lpAckDuration; - - if (le16_to_cpu(hdr->frame_control) & - IEEE80211_FCTL_MOREFRAGS) { - dur += dur; /* Add additional 'SIFS + ACK' */ - - /* - ** Compute size of next fragment in order to compute - ** durations needed to update NAV. - ** The last fragment uses the ACK duration only. - ** Add time for next fragment. - */ - dur += ath9k_hw_computetxtime(sc->sc_ah, rt, - txctl->nextfraglen, - rix, sc->sc_flags & ATH_PREAMBLE_SHORT); - } - - if (ieee80211_has_morefrags(fc) || - (le16_to_cpu(hdr->seq_ctrl) & IEEE80211_SCTL_FRAG)) { - /* - ** Force hardware to use computed duration for next - ** fragment by disabling multi-rate retry, which - ** updates duration based on the multi-rate - ** duration table. - */ - rcs[1].tries = rcs[2].tries = rcs[3].tries = 0; - rcs[1].rix = rcs[2].rix = rcs[3].rix = 0; - /* reset tries but keep rate index */ - rcs[0].tries = ATH_TXMAXTRY; - } - - hdr->duration_id = cpu_to_le16(dur); + ** Force hardware to use computed duration for next + ** fragment by disabling multi-rate retry, which + ** updates duration based on the multi-rate + ** duration table. + */ + rcs[1].tries = rcs[2].tries = rcs[3].tries = 0; + rcs[1].rix = rcs[2].rix = rcs[3].rix = 0; + /* reset tries but keep rate index */ + rcs[0].tries = ATH_TXMAXTRY; } /* @@ -484,12 +382,8 @@ static int ath_tx_prepare(struct ath_softc *sc, if (is_multicast_ether_addr(hdr->addr1)) { antenna = sc->sc_mcastantenna + 1; sc->sc_mcastantenna = (sc->sc_mcastantenna + 1) & 0x1; - } else - antenna = sc->sc_txantenna; + } -#ifdef USE_LEGACY_HAL - txctl->antenna = antenna; -#endif return 0; } @@ -502,7 +396,6 @@ static void ath_tx_complete_buf(struct ath_softc *sc, { struct sk_buff *skb = bf->bf_mpdu; struct ath_xmit_status tx_status; - dma_addr_t *pa; /* * Set retry information. @@ -518,13 +411,12 @@ static void ath_tx_complete_buf(struct ath_softc *sc, if (!txok) { tx_status.flags |= ATH_TX_ERROR; - if (bf->bf_isxretried) + if (bf_isxretried(bf)) tx_status.flags |= ATH_TX_XRETRY; } /* Unmap this frame */ - pa = get_dma_mem_context(bf, bf_dmacontext); pci_unmap_single(sc->pdev, - *pa, + bf->bf_dmacontext, skb->len, PCI_DMA_TODEVICE); /* complete this frame */ @@ -629,7 +521,7 @@ static int ath_tx_num_badfrms(struct ath_softc *sc, if (isnodegone || ds->ds_txstat.ts_flags == ATH9K_TX_SW_ABORTED) return 0; - isaggr = bf->bf_isaggr; + isaggr = bf_isaggr(bf); if (isaggr) { seq_st = ATH_DS_BA_SEQ(ds); memcpy(ba, ATH_DS_BA_BITMAP(ds), WME_BA_BMP_SIZE >> 3); @@ -651,7 +543,7 @@ static void ath_tx_set_retry(struct ath_softc *sc, struct ath_buf *bf) struct sk_buff *skb; struct ieee80211_hdr *hdr; - bf->bf_isretried = 1; + bf->bf_state.bf_type |= BUF_RETRY; bf->bf_retries++; skb = bf->bf_mpdu; @@ -698,7 +590,7 @@ static u32 ath_pkt_duration(struct ath_softc *sc, u8 rc; int streams, pktlen; - pktlen = bf->bf_isaggr ? bf->bf_al : bf->bf_frmlen; + pktlen = bf_isaggr(bf) ? bf->bf_al : bf->bf_frmlen; rc = rt->info[rix].rateCode; /* @@ -742,7 +634,7 @@ static void ath_buf_set_rate(struct ath_softc *sc, struct ath_buf *bf) int i, flags, rtsctsena = 0, dynamic_mimops = 0; u32 ctsduration = 0; u8 rix = 0, cix, ctsrate = 0; - u32 aggr_limit_with_rts = sc->sc_rtsaggrlimit; + u32 aggr_limit_with_rts = ah->ah_caps.rts_aggr_limit; struct ath_node *an = (struct ath_node *) bf->bf_node; /* @@ -781,7 +673,7 @@ static void ath_buf_set_rate(struct ath_softc *sc, struct ath_buf *bf) * let rate series flags determine which rates will actually * use RTS. */ - if ((ah->ah_caps.hw_caps & ATH9K_HW_CAP_HT) && bf->bf_isdata) { + if ((ah->ah_caps.hw_caps & ATH9K_HW_CAP_HT) && bf_isdata(bf)) { BUG_ON(!an); /* * 802.11g protection not needed, use our default behavior @@ -793,7 +685,7 @@ static void ath_buf_set_rate(struct ath_softc *sc, struct ath_buf *bf) * and the second aggregate should have any protection at all. */ if (an->an_smmode == ATH_SM_PWRSAV_DYNAMIC) { - if (!bf->bf_aggrburst) { + if (!bf_isaggrburst(bf)) { flags = ATH9K_TXDESC_RTSENA; dynamic_mimops = 1; } else { @@ -806,7 +698,7 @@ static void ath_buf_set_rate(struct ath_softc *sc, struct ath_buf *bf) * Set protection if aggregate protection on */ if (sc->sc_config.ath_aggr_prot && - (!bf->bf_isaggr || (bf->bf_isaggr && bf->bf_al < 8192))) { + (!bf_isaggr(bf) || (bf_isaggr(bf) && bf->bf_al < 8192))) { flags = ATH9K_TXDESC_RTSENA; cix = rt->info[sc->sc_protrix].controlRate; rtsctsena = 1; @@ -815,7 +707,7 @@ static void ath_buf_set_rate(struct ath_softc *sc, struct ath_buf *bf) /* * For AR5416 - RTS cannot be followed by a frame larger than 8K. */ - if (bf->bf_isaggr && (bf->bf_al > aggr_limit_with_rts)) { + if (bf_isaggr(bf) && (bf->bf_al > aggr_limit_with_rts)) { /* * Ensure that in the case of SM Dynamic power save * while we are bursting the second aggregate the @@ -832,7 +724,7 @@ static void ath_buf_set_rate(struct ath_softc *sc, struct ath_buf *bf) /* NB: cix is set above where RTS/CTS is enabled */ BUG_ON(cix == 0xff); ctsrate = rt->info[cix].rateCode | - (bf->bf_shpreamble ? rt->info[cix].shortPreamble : 0); + (bf_isshpreamble(bf) ? rt->info[cix].shortPreamble : 0); /* * Setup HAL rate series @@ -846,7 +738,7 @@ static void ath_buf_set_rate(struct ath_softc *sc, struct ath_buf *bf) rix = bf->bf_rcs[i].rix; series[i].Rate = rt->info[rix].rateCode | - (bf->bf_shpreamble ? rt->info[rix].shortPreamble : 0); + (bf_isshpreamble(bf) ? rt->info[rix].shortPreamble : 0); series[i].Tries = bf->bf_rcs[i].tries; @@ -862,7 +754,7 @@ static void ath_buf_set_rate(struct ath_softc *sc, struct ath_buf *bf) sc, rix, bf, (bf->bf_rcs[i].flags & ATH_RC_CW40_FLAG) != 0, (bf->bf_rcs[i].flags & ATH_RC_SGI_FLAG), - bf->bf_shpreamble); + bf_isshpreamble(bf)); if ((an->an_smmode == ATH_SM_PWRSAV_STATIC) && (bf->bf_rcs[i].flags & ATH_RC_DS_FLAG) == 0) { @@ -875,7 +767,7 @@ static void ath_buf_set_rate(struct ath_softc *sc, struct ath_buf *bf) */ series[i].ChSel = sc->sc_tx_chainmask; } else { - if (bf->bf_ht) + if (bf_isht(bf)) series[i].ChSel = ath_chainmask_sel_logic(sc, an); else @@ -908,7 +800,7 @@ static void ath_buf_set_rate(struct ath_softc *sc, struct ath_buf *bf) * use the precalculated ACK durations. */ if (flags & ATH9K_TXDESC_RTSENA) { /* SIFS + CTS */ - ctsduration += bf->bf_shpreamble ? + ctsduration += bf_isshpreamble(bf) ? rt->info[cix].spAckDuration : rt->info[cix].lpAckDuration; } @@ -916,7 +808,7 @@ static void ath_buf_set_rate(struct ath_softc *sc, struct ath_buf *bf) ctsduration += series[0].PktDuration; if ((bf->bf_flags & ATH9K_TXDESC_NOACK) == 0) { /* SIFS + ACK */ - ctsduration += bf->bf_shpreamble ? + ctsduration += bf_isshpreamble(bf) ? rt->info[rix].spAckDuration : rt->info[rix].lpAckDuration; } @@ -932,10 +824,10 @@ static void ath_buf_set_rate(struct ath_softc *sc, struct ath_buf *bf) * set dur_update_en for l-sig computation except for PS-Poll frames */ ath9k_hw_set11n_ratescenario(ah, ds, lastds, - !bf->bf_ispspoll, - ctsrate, - ctsduration, - series, 4, flags); + !bf_ispspoll(bf), + ctsrate, + ctsduration, + series, 4, flags); if (sc->sc_config.ath_aggr_prot && flags) ath9k_hw_set11n_burstduration(ah, ds, 8192); } @@ -958,7 +850,7 @@ static int ath_tx_send_normal(struct ath_softc *sc, BUG_ON(list_empty(bf_head)); bf = list_first_entry(bf_head, struct ath_buf, list); - bf->bf_isampdu = 0; /* regular HT frame */ + bf->bf_state.bf_type &= ~BUF_AMPDU; /* regular HT frame */ skb = (struct sk_buff *)bf->bf_mpdu; tx_info = IEEE80211_SKB_CB(skb); @@ -998,7 +890,7 @@ static void ath_tx_flush_tid(struct ath_softc *sc, struct ath_atx_tid *tid) while (!list_empty(&tid->buf_q)) { bf = list_first_entry(&tid->buf_q, struct ath_buf, list); - ASSERT(!bf->bf_isretried); + ASSERT(!bf_isretried(bf)); list_cut_position(&bf_head, &tid->buf_q, &bf->bf_lastfrm->list); ath_tx_send_normal(sc, txq, tid, &bf_head); } @@ -1025,7 +917,7 @@ static void ath_tx_complete_aggr_rifs(struct ath_softc *sc, int isaggr, txfail, txpending, sendbar = 0, needreset = 0; int isnodegone = (an->an_flags & ATH_NODE_CLEAN); - isaggr = bf->bf_isaggr; + isaggr = bf_isaggr(bf); if (isaggr) { if (txok) { if (ATH_DS_TX_BA(ds)) { @@ -1047,7 +939,7 @@ static void ath_tx_complete_aggr_rifs(struct ath_softc *sc, * when perform internal reset in this routine. * Only enable reset in STA mode for now. */ - if (sc->sc_opmode == ATH9K_M_STA) + if (sc->sc_ah->ah_opmode == ATH9K_M_STA) needreset = 1; } } else { @@ -1075,7 +967,7 @@ static void ath_tx_complete_aggr_rifs(struct ath_softc *sc, ath_tx_set_retry(sc, bf); txpending = 1; } else { - bf->bf_isxretried = 1; + bf->bf_state.bf_type |= BUF_XRETRY; txfail = 1; sendbar = 1; } @@ -1175,11 +1067,8 @@ static void ath_tx_complete_aggr_rifs(struct ath_softc *sc, tbf->bf_lastfrm->bf_desc); /* copy the DMA context */ - copy_dma_mem_context( - get_dma_mem_context(tbf, - bf_dmacontext), - get_dma_mem_context(bf_last, - bf_dmacontext)); + tbf->bf_dmacontext = + bf_last->bf_dmacontext; } list_add_tail(&tbf->list, &bf_head); } else { @@ -1188,7 +1077,7 @@ static void ath_tx_complete_aggr_rifs(struct ath_softc *sc, * software retry */ ath9k_hw_cleartxdesc(sc->sc_ah, - bf->bf_lastfrm->bf_desc); + bf->bf_lastfrm->bf_desc); } /* @@ -1242,7 +1131,7 @@ static void ath_tx_complete_aggr_rifs(struct ath_softc *sc, } if (needreset) - ath_internal_reset(sc); + ath_reset(sc, false); return; } @@ -1331,7 +1220,7 @@ static int ath_tx_processq(struct ath_softc *sc, struct ath_txq *txq) txq->axq_depth--; - if (bf->bf_isaggr) + if (bf_isaggr(bf)) txq->axq_aggr_depth--; txok = (ds->ds_txstat.ts_status == 0); @@ -1345,14 +1234,14 @@ static int ath_tx_processq(struct ath_softc *sc, struct ath_txq *txq) spin_unlock_bh(&sc->sc_txbuflock); } - if (!bf->bf_isampdu) { + if (!bf_isampdu(bf)) { /* * This frame is sent out as a single frame. * Use hardware retry status for this frame. */ bf->bf_retries = ds->ds_txstat.ts_longretry; if (ds->ds_txstat.ts_status & ATH9K_TXERR_XRETRY) - bf->bf_isxretried = 1; + bf->bf_state.bf_type |= BUF_XRETRY; nbad = 0; } else { nbad = ath_tx_num_badfrms(sc, bf, txok); @@ -1368,7 +1257,7 @@ static int ath_tx_processq(struct ath_softc *sc, struct ath_txq *txq) if (ds->ds_txstat.ts_status == 0) nacked++; - if (bf->bf_isdata) { + if (bf_isdata(bf)) { if (isrifs) tmp_ds = bf->bf_rifslast->bf_desc; else @@ -1384,7 +1273,7 @@ static int ath_tx_processq(struct ath_softc *sc, struct ath_txq *txq) /* * Complete this transmit unit */ - if (bf->bf_isampdu) + if (bf_isampdu(bf)) ath_tx_complete_aggr_rifs(sc, txq, bf, &bf_head, txok); else ath_tx_complete_buf(sc, bf, &bf_head, txok, 0); @@ -1406,7 +1295,7 @@ static int ath_tx_processq(struct ath_softc *sc, struct ath_txq *txq) /* * schedule any pending packets if aggregation is enabled */ - if (sc->sc_txaggr) + if (sc->sc_flags & SC_OP_TXAGGR) ath_txq_schedule(sc, txq); spin_unlock_bh(&txq->axq_lock); } @@ -1430,10 +1319,9 @@ static void ath_drain_txdataq(struct ath_softc *sc, bool retry_tx) struct ath_hal *ah = sc->sc_ah; int i; int npend = 0; - enum ath9k_ht_macmode ht_macmode = ath_cwm_macmode(sc); /* XXX return value */ - if (!sc->sc_invalid) { + if (!(sc->sc_flags & SC_OP_INVALID)) { for (i = 0; i < ATH9K_NUM_TX_QUEUES; i++) { if (ATH_TXQ_SETUP(sc, i)) { ath_tx_stopdma(sc, &sc->sc_txq[i]); @@ -1454,10 +1342,11 @@ static void ath_drain_txdataq(struct ath_softc *sc, bool retry_tx) "%s: Unable to stop TxDMA. Reset HAL!\n", __func__); spin_lock_bh(&sc->sc_resetlock); - if (!ath9k_hw_reset(ah, sc->sc_opmode, - &sc->sc_curchan, ht_macmode, - sc->sc_tx_chainmask, sc->sc_rx_chainmask, - sc->sc_ht_extprotspacing, true, &status)) { + if (!ath9k_hw_reset(ah, + sc->sc_ah->ah_curchan, + sc->sc_ht_info.tx_chan_width, + sc->sc_tx_chainmask, sc->sc_rx_chainmask, + sc->sc_ht_extprotspacing, true, &status)) { DPRINTF(sc, ATH_DBG_FATAL, "%s: unable to reset hardware; hal status %u\n", @@ -1481,7 +1370,7 @@ static void ath_tx_addto_baw(struct ath_softc *sc, { int index, cindex; - if (bf->bf_isretried) + if (bf_isretried(bf)) return; index = ATH_BA_INDEX(tid->seq_start, bf->bf_seqno); @@ -1516,7 +1405,7 @@ static int ath_tx_send_ampdu(struct ath_softc *sc, BUG_ON(list_empty(bf_head)); bf = list_first_entry(bf_head, struct ath_buf, list); - bf->bf_isampdu = 1; + bf->bf_state.bf_type |= BUF_AMPDU; bf->bf_seqno = txctl->seqno; /* save seqno and tidno in buffer */ bf->bf_tidno = txctl->tidno; @@ -1860,7 +1749,7 @@ static void ath_tx_sched_aggr(struct ath_softc *sc, if (bf->bf_nframes == 1) { ASSERT(bf->bf_lastfrm == bf_last); - bf->bf_isaggr = 0; + bf->bf_state.bf_type &= ~BUF_AGGR; /* * clear aggr bits for every descriptor * XXX TODO: is there a way to optimize it? @@ -1877,7 +1766,7 @@ static void ath_tx_sched_aggr(struct ath_softc *sc, /* * setup first desc with rate and aggr info */ - bf->bf_isaggr = 1; + bf->bf_state.bf_type |= BUF_AGGR; ath_buf_set_rate(sc, bf); ath9k_hw_set11n_aggr_first(sc->sc_ah, bf->bf_desc, bf->bf_al); @@ -1925,7 +1814,7 @@ static void ath_tid_drain(struct ath_softc *sc, list_cut_position(&bf_head, &tid->buf_q, &bf->bf_lastfrm->list); /* update baw for software retried frame */ - if (bf->bf_isretried) + if (bf_isretried(bf)) ath_tx_update_baw(sc, tid, bf->bf_seqno); /* @@ -1990,13 +1879,18 @@ static int ath_tx_start_dma(struct ath_softc *sc, struct list_head bf_head; struct ath_desc *ds; struct ath_hal *ah = sc->sc_ah; - struct ath_txq *txq = &sc->sc_txq[txctl->qnum]; + struct ath_txq *txq; struct ath_tx_info_priv *tx_info_priv; struct ath_rc_series *rcs; struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb); __le16 fc = hdr->frame_control; + if (unlikely(txctl->flags & ATH9K_TXDESC_CAB)) + txq = sc->sc_cabq; + else + txq = &sc->sc_txq[txctl->qnum]; + /* For each sglist entry, allocate an ath_buf for DMA */ INIT_LIST_HEAD(&bf_head); spin_lock_bh(&sc->sc_txbuflock); @@ -2014,11 +1908,21 @@ static int ath_tx_start_dma(struct ath_softc *sc, /* set up this buffer */ ATH_TXBUF_RESET(bf); bf->bf_frmlen = txctl->frmlen; - bf->bf_isdata = ieee80211_is_data(fc); - bf->bf_isbar = ieee80211_is_back_req(fc); - bf->bf_ispspoll = ieee80211_is_pspoll(fc); + + ieee80211_is_data(fc) ? + (bf->bf_state.bf_type |= BUF_DATA) : + (bf->bf_state.bf_type &= ~BUF_DATA); + ieee80211_is_back_req(fc) ? + (bf->bf_state.bf_type |= BUF_BAR) : + (bf->bf_state.bf_type &= ~BUF_BAR); + ieee80211_is_pspoll(fc) ? + (bf->bf_state.bf_type |= BUF_PSPOLL) : + (bf->bf_state.bf_type &= ~BUF_PSPOLL); + (sc->sc_flags & SC_OP_PREAMBLE_SHORT) ? + (bf->bf_state.bf_type |= BUF_SHORT_PREAMBLE) : + (bf->bf_state.bf_type &= ~BUF_SHORT_PREAMBLE); + bf->bf_flags = txctl->flags; - bf->bf_shpreamble = sc->sc_flags & ATH_PREAMBLE_SHORT; bf->bf_keytype = txctl->keytype; tx_info_priv = (struct ath_tx_info_priv *)tx_info->driver_data[0]; rcs = tx_info_priv->rcs; @@ -2038,8 +1942,7 @@ static int ath_tx_start_dma(struct ath_softc *sc, /* * Save the DMA context in the first ath_buf */ - copy_dma_mem_context(get_dma_mem_context(bf, bf_dmacontext), - get_dma_mem_context(txctl, dmacontext)); + bf->bf_dmacontext = txctl->dmacontext; /* * Formulate first tx descriptor with tx controls. @@ -2060,11 +1963,13 @@ static int ath_tx_start_dma(struct ath_softc *sc, ds); /* first descriptor */ bf->bf_lastfrm = bf; - bf->bf_ht = txctl->ht; + (txctl->ht) ? + (bf->bf_state.bf_type |= BUF_HT) : + (bf->bf_state.bf_type &= ~BUF_HT); spin_lock_bh(&txq->axq_lock); - if (txctl->ht && sc->sc_txaggr) { + if (txctl->ht && (sc->sc_flags & SC_OP_TXAGGR)) { struct ath_atx_tid *tid = ATH_AN_2_TID(an, txctl->tidno); if (ath_aggr_query(sc, an, txctl->tidno)) { /* @@ -2090,27 +1995,7 @@ static int ath_tx_start_dma(struct ath_softc *sc, bf->bf_tidno = txctl->tidno; } - if (is_multicast_ether_addr(hdr->addr1)) { - struct ath_vap *avp = sc->sc_vaps[txctl->if_id]; - - /* - * When servicing one or more stations in power-save - * mode (or) if there is some mcast data waiting on - * mcast queue (to prevent out of order delivery of - * mcast,bcast packets) multicast frames must be - * buffered until after the beacon. We use the private - * mcast queue for that. - */ - /* XXX? more bit in 802.11 frame header */ - spin_lock_bh(&avp->av_mcastq.axq_lock); - if (txctl->ps || avp->av_mcastq.axq_depth) - ath_tx_mcastqaddbuf(sc, - &avp->av_mcastq, &bf_head); - else - ath_tx_txqaddbuf(sc, txq, &bf_head); - spin_unlock_bh(&avp->av_mcastq.axq_lock); - } else - ath_tx_txqaddbuf(sc, txq, &bf_head); + ath_tx_txqaddbuf(sc, txq, &bf_head); } spin_unlock_bh(&txq->axq_lock); return 0; @@ -2118,30 +2003,31 @@ static int ath_tx_start_dma(struct ath_softc *sc, static void xmit_map_sg(struct ath_softc *sc, struct sk_buff *skb, - dma_addr_t *pa, struct ath_tx_control *txctl) { struct ath_xmit_status tx_status; struct ath_atx_tid *tid; struct scatterlist sg; - *pa = pci_map_single(sc->pdev, skb->data, skb->len, PCI_DMA_TODEVICE); + txctl->dmacontext = pci_map_single(sc->pdev, skb->data, + skb->len, PCI_DMA_TODEVICE); /* setup S/G list */ memset(&sg, 0, sizeof(struct scatterlist)); - sg_dma_address(&sg) = *pa; + sg_dma_address(&sg) = txctl->dmacontext; sg_dma_len(&sg) = skb->len; if (ath_tx_start_dma(sc, skb, &sg, 1, txctl) != 0) { /* * We have to do drop frame here. */ - pci_unmap_single(sc->pdev, *pa, skb->len, PCI_DMA_TODEVICE); + pci_unmap_single(sc->pdev, txctl->dmacontext, + skb->len, PCI_DMA_TODEVICE); tx_status.retries = 0; tx_status.flags = ATH_TX_ERROR; - if (txctl->ht && sc->sc_txaggr) { + if (txctl->ht && (sc->sc_flags & SC_OP_TXAGGR)) { /* Reclaim the seqno. */ tid = ATH_AN_2_TID((struct ath_node *) txctl->an, txctl->tidno); @@ -2162,7 +2048,7 @@ int ath_tx_init(struct ath_softc *sc, int nbufs) /* Setup tx descriptors */ error = ath_descdma_setup(sc, &sc->sc_txdma, &sc->sc_txbuf, - "tx", nbufs * ATH_FRAG_PER_MSDU, ATH_TXDESC); + "tx", nbufs, 1); if (error != 0) { DPRINTF(sc, ATH_DBG_FATAL, "%s: failed to allocate tx descriptors: %d\n", @@ -2403,6 +2289,7 @@ int ath_tx_start(struct ath_softc *sc, struct sk_buff *skb) struct ath_tx_control txctl; int error = 0; + memset(&txctl, 0, sizeof(struct ath_tx_control)); error = ath_tx_prepare(sc, skb, &txctl); if (error == 0) /* @@ -2410,9 +2297,7 @@ int ath_tx_start(struct ath_softc *sc, struct sk_buff *skb) * ath_tx_start_dma() will be called either synchronously * or asynchrounsly once DMA is complete. */ - xmit_map_sg(sc, skb, - get_dma_mem_context(&txctl, dmacontext), - &txctl); + xmit_map_sg(sc, skb, &txctl); else ath_node_put(sc, txctl.an, ATH9K_BH_STATUS_CHANGE); @@ -2424,8 +2309,7 @@ int ath_tx_start(struct ath_softc *sc, struct sk_buff *skb) void ath_tx_tasklet(struct ath_softc *sc) { - u64 tsf = ath9k_hw_gettsf64(sc->sc_ah); - int i, nacked = 0; + int i; u32 qcumask = ((1 << ATH9K_NUM_TX_QUEUES) - 1); ath9k_hw_gettxintrtxqs(sc->sc_ah, &qcumask); @@ -2435,10 +2319,8 @@ void ath_tx_tasklet(struct ath_softc *sc) */ for (i = 0; i < ATH9K_NUM_TX_QUEUES; i++) { if (ATH_TXQ_SETUP(sc, i) && (qcumask & (1 << i))) - nacked += ath_tx_processq(sc, &sc->sc_txq[i]); + ath_tx_processq(sc, &sc->sc_txq[i]); } - if (nacked) - sc->sc_lastrx = tsf; } void ath_tx_draintxq(struct ath_softc *sc, @@ -2486,14 +2368,14 @@ void ath_tx_draintxq(struct ath_softc *sc, spin_unlock_bh(&txq->axq_lock); - if (bf->bf_isampdu) + if (bf_isampdu(bf)) ath_tx_complete_aggr_rifs(sc, txq, bf, &bf_head, 0); else ath_tx_complete_buf(sc, bf, &bf_head, 0, 0); } /* flush any pending frames if aggregation is enabled */ - if (sc->sc_txaggr) { + if (sc->sc_flags & SC_OP_TXAGGR) { if (!retry_tx) { spin_lock_bh(&txq->axq_lock); ath_txq_drain_pending_buffers(sc, txq, @@ -2509,7 +2391,7 @@ void ath_draintxq(struct ath_softc *sc, bool retry_tx) { /* stop beacon queue. The beacon will be freed when * we go to INIT state */ - if (!sc->sc_invalid) { + if (!(sc->sc_flags & SC_OP_INVALID)) { (void) ath9k_hw_stoptxdma(sc->sc_ah, sc->sc_bhalq); DPRINTF(sc, ATH_DBG_XMIT, "%s: beacon queue %x\n", __func__, ath9k_hw_gettxbuf(sc->sc_ah, sc->sc_bhalq)); @@ -2536,7 +2418,7 @@ enum ATH_AGGR_CHECK ath_tx_aggr_check(struct ath_softc *sc, struct ath_atx_tid *txtid; DECLARE_MAC_BUF(mac); - if (!sc->sc_txaggr) + if (!(sc->sc_flags & SC_OP_TXAGGR)) return AGGR_NOT_REQUIRED; /* ADDBA exchange must be completed before sending aggregates */ @@ -2583,7 +2465,7 @@ int ath_tx_aggr_start(struct ath_softc *sc, return -1; } - if (sc->sc_txaggr) { + if (sc->sc_flags & SC_OP_TXAGGR) { txtid = ATH_AN_2_TID(an, tid); txtid->addba_exchangeinprogress = 1; ath_tx_pause_tid(sc, txtid); @@ -2647,7 +2529,7 @@ void ath_tx_aggr_teardown(struct ath_softc *sc, spin_lock_bh(&txq->axq_lock); while (!list_empty(&txtid->buf_q)) { bf = list_first_entry(&txtid->buf_q, struct ath_buf, list); - if (!bf->bf_isretried) { + if (!bf_isretried(bf)) { /* * NB: it's based on the assumption that * software retried frame will always stay @@ -2743,7 +2625,7 @@ void ath_txq_schedule(struct ath_softc *sc, struct ath_txq *txq) void ath_tx_node_init(struct ath_softc *sc, struct ath_node *an) { - if (sc->sc_txaggr) { + if (sc->sc_flags & SC_OP_TXAGGR) { struct ath_atx_tid *tid; struct ath_atx_ac *ac; int tidno, acno; @@ -2855,7 +2737,7 @@ void ath_tx_node_cleanup(struct ath_softc *sc, void ath_tx_node_free(struct ath_softc *sc, struct ath_node *an) { - if (sc->sc_txaggr) { + if (sc->sc_flags & SC_OP_TXAGGR) { struct ath_atx_tid *tid; int tidno, i; @@ -2869,3 +2751,57 @@ void ath_tx_node_free(struct ath_softc *sc, struct ath_node *an) } } } + +void ath_tx_cabq(struct ath_softc *sc, struct sk_buff *skb) +{ + int hdrlen, padsize; + struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); + struct ath_tx_control txctl; + + /* + * As a temporary workaround, assign seq# here; this will likely need + * to be cleaned up to work better with Beacon transmission and virtual + * BSSes. + */ + if (info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ) { + struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; + if (info->flags & IEEE80211_TX_CTL_FIRST_FRAGMENT) + sc->seq_no += 0x10; + hdr->seq_ctrl &= cpu_to_le16(IEEE80211_SCTL_FRAG); + hdr->seq_ctrl |= cpu_to_le16(sc->seq_no); + } + + /* Add the padding after the header if this is not already done */ + hdrlen = ieee80211_get_hdrlen_from_skb(skb); + if (hdrlen & 3) { + padsize = hdrlen % 4; + if (skb_headroom(skb) < padsize) { + DPRINTF(sc, ATH_DBG_XMIT, "%s: TX CABQ padding " + "failed\n", __func__); + dev_kfree_skb_any(skb); + return; + } + skb_push(skb, padsize); + memmove(skb->data, skb->data + padsize, hdrlen); + } + + DPRINTF(sc, ATH_DBG_XMIT, "%s: transmitting CABQ packet, skb: %p\n", + __func__, + skb); + + memset(&txctl, 0, sizeof(struct ath_tx_control)); + txctl.flags = ATH9K_TXDESC_CAB; + if (ath_tx_prepare(sc, skb, &txctl) == 0) { + /* + * Start DMA mapping. + * ath_tx_start_dma() will be called either synchronously + * or asynchrounsly once DMA is complete. + */ + xmit_map_sg(sc, skb, &txctl); + } else { + ath_node_put(sc, txctl.an, ATH9K_BH_STATUS_CHANGE); + DPRINTF(sc, ATH_DBG_XMIT, "%s: TX CABQ failed\n", __func__); + dev_kfree_skb_any(skb); + } +} + diff --git a/drivers/net/wireless/b43/Kconfig b/drivers/net/wireless/b43/Kconfig index 1fa043d1802..1f81d36f87c 100644 --- a/drivers/net/wireless/b43/Kconfig +++ b/drivers/net/wireless/b43/Kconfig @@ -80,6 +80,18 @@ config B43_NPHY SAY N. +config B43_PHY_LP + bool "IEEE 802.11g LP-PHY support (BROKEN)" + depends on B43 && EXPERIMENTAL && BROKEN + ---help--- + Support for the LP-PHY. + The LP-PHY is an IEEE 802.11g based PHY built into some notebooks + and embedded devices. + + THIS IS BROKEN AND DOES NOT WORK YET. + + SAY N. + # This config option automatically enables b43 LEDS support, # if it's possible. config B43_LEDS diff --git a/drivers/net/wireless/b43/Makefile b/drivers/net/wireless/b43/Makefile index 8c52b0b9862..14a02b3aea5 100644 --- a/drivers/net/wireless/b43/Makefile +++ b/drivers/net/wireless/b43/Makefile @@ -1,8 +1,11 @@ b43-y += main.o b43-y += tables.o b43-$(CONFIG_B43_NPHY) += tables_nphy.o -b43-y += phy.o -b43-$(CONFIG_B43_NPHY) += nphy.o +b43-y += phy_common.o +b43-y += phy_g.o +b43-y += phy_a.o +b43-$(CONFIG_B43_NPHY) += phy_n.o +b43-$(CONFIG_B43_PHY_LP) += phy_lp.o b43-y += sysfs.o b43-y += xmit.o b43-y += lo.o diff --git a/drivers/net/wireless/b43/b43.h b/drivers/net/wireless/b43/b43.h index edcdfa36645..f9c8161671d 100644 --- a/drivers/net/wireless/b43/b43.h +++ b/drivers/net/wireless/b43/b43.h @@ -12,7 +12,7 @@ #include "leds.h" #include "rfkill.h" #include "lo.h" -#include "phy.h" +#include "phy_common.h" /* The unique identifier of the firmware that's officially supported by @@ -173,6 +173,11 @@ enum { #define B43_SHM_SH_CHAN 0x00A0 /* Current channel (low 8bit only) */ #define B43_SHM_SH_CHAN_5GHZ 0x0100 /* Bit set, if 5Ghz channel */ #define B43_SHM_SH_BCMCFIFOID 0x0108 /* Last posted cookie to the bcast/mcast FIFO */ +/* TSSI information */ +#define B43_SHM_SH_TSSI_CCK 0x0058 /* TSSI for last 4 CCK frames (32bit) */ +#define B43_SHM_SH_TSSI_OFDM_A 0x0068 /* TSSI for last 4 OFDM frames (32bit) */ +#define B43_SHM_SH_TSSI_OFDM_G 0x0070 /* TSSI for last 4 OFDM frames (32bit) */ +#define B43_TSSI_MAX 0x7F /* Max value for one TSSI value */ /* SHM_SHARED TX FIFO variables */ #define B43_SHM_SH_SIZE01 0x0098 /* TX FIFO size for FIFO 0 (low) and 1 (high) */ #define B43_SHM_SH_SIZE23 0x009A /* TX FIFO size for FIFO 2 and 3 */ @@ -508,122 +513,6 @@ struct b43_iv { } __attribute__((__packed__)); -struct b43_phy { - /* Band support flags. */ - bool supports_2ghz; - bool supports_5ghz; - - /* GMODE bit enabled? */ - bool gmode; - - /* Analog Type */ - u8 analog; - /* B43_PHYTYPE_ */ - u8 type; - /* PHY revision number. */ - u8 rev; - - /* Radio versioning */ - u16 radio_manuf; /* Radio manufacturer */ - u16 radio_ver; /* Radio version */ - u8 radio_rev; /* Radio revision */ - - bool dyn_tssi_tbl; /* tssi2dbm is kmalloc()ed. */ - - /* ACI (adjacent channel interference) flags. */ - bool aci_enable; - bool aci_wlan_automatic; - bool aci_hw_rssi; - - /* Radio switched on/off */ - bool radio_on; - struct { - /* Values saved when turning the radio off. - * They are needed when turning it on again. */ - bool valid; - u16 rfover; - u16 rfoverval; - } radio_off_context; - - u16 minlowsig[2]; - u16 minlowsigpos[2]; - - /* TSSI to dBm table in use */ - const s8 *tssi2dbm; - /* Target idle TSSI */ - int tgt_idle_tssi; - /* Current idle TSSI */ - int cur_idle_tssi; - - /* LocalOscillator control values. */ - struct b43_txpower_lo_control *lo_control; - /* Values from b43_calc_loopback_gain() */ - s16 max_lb_gain; /* Maximum Loopback gain in hdB */ - s16 trsw_rx_gain; /* TRSW RX gain in hdB */ - s16 lna_lod_gain; /* LNA lod */ - s16 lna_gain; /* LNA */ - s16 pga_gain; /* PGA */ - - /* Desired TX power level (in dBm). - * This is set by the user and adjusted in b43_phy_xmitpower(). */ - u8 power_level; - /* A-PHY TX Power control value. */ - u16 txpwr_offset; - - /* Current TX power level attenuation control values */ - struct b43_bbatt bbatt; - struct b43_rfatt rfatt; - u8 tx_control; /* B43_TXCTL_XXX */ - - /* Hardware Power Control enabled? */ - bool hardware_power_control; - - /* Current Interference Mitigation mode */ - int interfmode; - /* Stack of saved values from the Interference Mitigation code. - * Each value in the stack is layed out as follows: - * bit 0-11: offset - * bit 12-15: register ID - * bit 16-32: value - * register ID is: 0x1 PHY, 0x2 Radio, 0x3 ILT - */ -#define B43_INTERFSTACK_SIZE 26 - u32 interfstack[B43_INTERFSTACK_SIZE]; //FIXME: use a data structure - - /* Saved values from the NRSSI Slope calculation */ - s16 nrssi[2]; - s32 nrssislope; - /* In memory nrssi lookup table. */ - s8 nrssi_lt[64]; - - /* current channel */ - u8 channel; - - u16 lofcal; - - u16 initval; //FIXME rename? - - /* PHY TX errors counter. */ - atomic_t txerr_cnt; - - /* The device does address auto increment for the OFDM tables. - * We cache the previously used address here and omit the address - * write on the next table access, if possible. */ - u16 ofdmtab_addr; /* The address currently set in hardware. */ - enum { /* The last data flow direction. */ - B43_OFDMTAB_DIRECTION_UNKNOWN = 0, - B43_OFDMTAB_DIRECTION_READ, - B43_OFDMTAB_DIRECTION_WRITE, - } ofdmtab_addr_direction; - -#if B43_DEBUG - /* Manual TX-power control enabled? */ - bool manual_txpower_control; - /* PHY registers locked by b43_phy_lock()? */ - bool phy_locked; -#endif /* B43_DEBUG */ -}; - /* Data structures for DMA transmission, per 80211 core. */ struct b43_dma { struct b43_dmaring *tx_ring_AC_BK; /* Background */ @@ -764,6 +653,11 @@ struct b43_wl { struct b43_qos_params qos_params[4]; /* Workqueue for updating QOS parameters in hardware. */ struct work_struct qos_update_work; + + /* Work for adjustment of the transmission power. + * This is scheduled when we determine that the actual TX output + * power doesn't match what we want. */ + struct work_struct txpower_adjust_work; }; /* In-memory representation of a cached microcode file. */ @@ -908,6 +802,15 @@ static inline int b43_is_mode(struct b43_wl *wl, int type) return (wl->operating && wl->if_type == type); } +/** + * b43_current_band - Returns the currently used band. + * Returns one of IEEE80211_BAND_2GHZ and IEEE80211_BAND_5GHZ. + */ +static inline enum ieee80211_band b43_current_band(struct b43_wl *wl) +{ + return wl->hw->conf.channel->band; +} + static inline u16 b43_read16(struct b43_wldev *dev, u16 offset) { return ssb_read16(dev->dev, offset); diff --git a/drivers/net/wireless/b43/debugfs.c b/drivers/net/wireless/b43/debugfs.c index 29851bc1101..06a01da8016 100644 --- a/drivers/net/wireless/b43/debugfs.c +++ b/drivers/net/wireless/b43/debugfs.c @@ -443,76 +443,6 @@ out_unlock: return count; } -static ssize_t txpower_g_read_file(struct b43_wldev *dev, - char *buf, size_t bufsize) -{ - ssize_t count = 0; - - if (dev->phy.type != B43_PHYTYPE_G) { - fappend("Device is not a G-PHY\n"); - goto out; - } - fappend("Control: %s\n", dev->phy.manual_txpower_control ? - "MANUAL" : "AUTOMATIC"); - fappend("Baseband attenuation: %u\n", dev->phy.bbatt.att); - fappend("Radio attenuation: %u\n", dev->phy.rfatt.att); - fappend("TX Mixer Gain: %s\n", - (dev->phy.tx_control & B43_TXCTL_TXMIX) ? "ON" : "OFF"); - fappend("PA Gain 2dB: %s\n", - (dev->phy.tx_control & B43_TXCTL_PA2DB) ? "ON" : "OFF"); - fappend("PA Gain 3dB: %s\n", - (dev->phy.tx_control & B43_TXCTL_PA3DB) ? "ON" : "OFF"); - fappend("\n\n"); - fappend("You can write to this file:\n"); - fappend("Writing \"auto\" enables automatic txpower control.\n"); - fappend - ("Writing the attenuation values as \"bbatt rfatt txmix pa2db pa3db\" " - "enables manual txpower control.\n"); - fappend("Example: 5 4 0 0 1\n"); - fappend("Enables manual control with Baseband attenuation 5, " - "Radio attenuation 4, No TX Mixer Gain, " - "No PA Gain 2dB, With PA Gain 3dB.\n"); -out: - return count; -} - -static int txpower_g_write_file(struct b43_wldev *dev, - const char *buf, size_t count) -{ - if (dev->phy.type != B43_PHYTYPE_G) - return -ENODEV; - if ((count >= 4) && (memcmp(buf, "auto", 4) == 0)) { - /* Automatic control */ - dev->phy.manual_txpower_control = 0; - b43_phy_xmitpower(dev); - } else { - int bbatt = 0, rfatt = 0, txmix = 0, pa2db = 0, pa3db = 0; - /* Manual control */ - if (sscanf(buf, "%d %d %d %d %d", &bbatt, &rfatt, - &txmix, &pa2db, &pa3db) != 5) - return -EINVAL; - b43_put_attenuation_into_ranges(dev, &bbatt, &rfatt); - dev->phy.manual_txpower_control = 1; - dev->phy.bbatt.att = bbatt; - dev->phy.rfatt.att = rfatt; - dev->phy.tx_control = 0; - if (txmix) - dev->phy.tx_control |= B43_TXCTL_TXMIX; - if (pa2db) - dev->phy.tx_control |= B43_TXCTL_PA2DB; - if (pa3db) - dev->phy.tx_control |= B43_TXCTL_PA3DB; - b43_phy_lock(dev); - b43_radio_lock(dev); - b43_set_txpower_g(dev, &dev->phy.bbatt, - &dev->phy.rfatt, dev->phy.tx_control); - b43_radio_unlock(dev); - b43_phy_unlock(dev); - } - - return 0; -} - /* wl->irq_lock is locked */ static int restart_write_file(struct b43_wldev *dev, const char *buf, size_t count) @@ -560,7 +490,7 @@ static ssize_t loctls_read_file(struct b43_wldev *dev, err = -ENODEV; goto out; } - lo = phy->lo_control; + lo = phy->g->lo_control; fappend("-- Local Oscillator calibration data --\n\n"); fappend("HW-power-control enabled: %d\n", dev->phy.hardware_power_control); @@ -578,8 +508,8 @@ static ssize_t loctls_read_file(struct b43_wldev *dev, list_for_each_entry(cal, &lo->calib_list, list) { bool active; - active = (b43_compare_bbatt(&cal->bbatt, &phy->bbatt) && - b43_compare_rfatt(&cal->rfatt, &phy->rfatt)); + active = (b43_compare_bbatt(&cal->bbatt, &phy->g->bbatt) && + b43_compare_rfatt(&cal->rfatt, &phy->g->rfatt)); fappend("BB(%d), RF(%d,%d) -> I=%d, Q=%d " "(expires in %lu sec)%s\n", cal->bbatt.att, @@ -763,7 +693,6 @@ B43_DEBUGFS_FOPS(mmio32read, mmio32read__read_file, mmio32read__write_file, 1); B43_DEBUGFS_FOPS(mmio32write, NULL, mmio32write__write_file, 1); B43_DEBUGFS_FOPS(tsf, tsf_read_file, tsf_write_file, 1); B43_DEBUGFS_FOPS(txstat, txstat_read_file, NULL, 0); -B43_DEBUGFS_FOPS(txpower_g, txpower_g_read_file, txpower_g_write_file, 0); B43_DEBUGFS_FOPS(restart, NULL, restart_write_file, 1); B43_DEBUGFS_FOPS(loctls, loctls_read_file, NULL, 0); @@ -877,7 +806,6 @@ void b43_debugfs_add_device(struct b43_wldev *dev) ADD_FILE(mmio32write, 0200); ADD_FILE(tsf, 0600); ADD_FILE(txstat, 0400); - ADD_FILE(txpower_g, 0600); ADD_FILE(restart, 0200); ADD_FILE(loctls, 0400); @@ -907,7 +835,6 @@ void b43_debugfs_remove_device(struct b43_wldev *dev) debugfs_remove(e->file_mmio32write.dentry); debugfs_remove(e->file_tsf.dentry); debugfs_remove(e->file_txstat.dentry); - debugfs_remove(e->file_txpower_g.dentry); debugfs_remove(e->file_restart.dentry); debugfs_remove(e->file_loctls.dentry); diff --git a/drivers/net/wireless/b43/lo.c b/drivers/net/wireless/b43/lo.c index 9c854d6aae3..6a18a147046 100644 --- a/drivers/net/wireless/b43/lo.c +++ b/drivers/net/wireless/b43/lo.c @@ -29,7 +29,7 @@ #include "b43.h" #include "lo.h" -#include "phy.h" +#include "phy_g.h" #include "main.h" #include <linux/delay.h> @@ -174,7 +174,8 @@ static u16 lo_txctl_register_table(struct b43_wldev *dev, static void lo_measure_txctl_values(struct b43_wldev *dev) { struct b43_phy *phy = &dev->phy; - struct b43_txpower_lo_control *lo = phy->lo_control; + struct b43_phy_g *gphy = phy->g; + struct b43_txpower_lo_control *lo = gphy->lo_control; u16 reg, mask; u16 trsw_rx, pga; u16 radio_pctl_reg; @@ -195,7 +196,7 @@ static void lo_measure_txctl_values(struct b43_wldev *dev) int lb_gain; /* Loopback gain (in dB) */ trsw_rx = 0; - lb_gain = phy->max_lb_gain / 2; + lb_gain = gphy->max_lb_gain / 2; if (lb_gain > 10) { radio_pctl_reg = 0; pga = abs(10 - lb_gain) / 6; @@ -226,7 +227,7 @@ static void lo_measure_txctl_values(struct b43_wldev *dev) } b43_radio_write16(dev, 0x43, (b43_radio_read16(dev, 0x43) & 0xFFF0) | radio_pctl_reg); - b43_phy_set_baseband_attenuation(dev, 2); + b43_gphy_set_baseband_attenuation(dev, 2); reg = lo_txctl_register_table(dev, &mask, NULL); mask = ~mask; @@ -277,7 +278,8 @@ static void lo_measure_txctl_values(struct b43_wldev *dev) static void lo_read_power_vector(struct b43_wldev *dev) { struct b43_phy *phy = &dev->phy; - struct b43_txpower_lo_control *lo = phy->lo_control; + struct b43_phy_g *gphy = phy->g; + struct b43_txpower_lo_control *lo = gphy->lo_control; int i; u64 tmp; u64 power_vector = 0; @@ -298,6 +300,7 @@ static void lo_measure_gain_values(struct b43_wldev *dev, s16 max_rx_gain, int use_trsw_rx) { struct b43_phy *phy = &dev->phy; + struct b43_phy_g *gphy = phy->g; u16 tmp; if (max_rx_gain < 0) @@ -308,7 +311,7 @@ static void lo_measure_gain_values(struct b43_wldev *dev, int trsw_rx_gain; if (use_trsw_rx) { - trsw_rx_gain = phy->trsw_rx_gain / 2; + trsw_rx_gain = gphy->trsw_rx_gain / 2; if (max_rx_gain >= trsw_rx_gain) { trsw_rx_gain = max_rx_gain - trsw_rx_gain; trsw_rx = 0x20; @@ -316,38 +319,38 @@ static void lo_measure_gain_values(struct b43_wldev *dev, } else trsw_rx_gain = max_rx_gain; if (trsw_rx_gain < 9) { - phy->lna_lod_gain = 0; + gphy->lna_lod_gain = 0; } else { - phy->lna_lod_gain = 1; + gphy->lna_lod_gain = 1; trsw_rx_gain -= 8; } trsw_rx_gain = clamp_val(trsw_rx_gain, 0, 0x2D); - phy->pga_gain = trsw_rx_gain / 3; - if (phy->pga_gain >= 5) { - phy->pga_gain -= 5; - phy->lna_gain = 2; + gphy->pga_gain = trsw_rx_gain / 3; + if (gphy->pga_gain >= 5) { + gphy->pga_gain -= 5; + gphy->lna_gain = 2; } else - phy->lna_gain = 0; + gphy->lna_gain = 0; } else { - phy->lna_gain = 0; - phy->trsw_rx_gain = 0x20; + gphy->lna_gain = 0; + gphy->trsw_rx_gain = 0x20; if (max_rx_gain >= 0x14) { - phy->lna_lod_gain = 1; - phy->pga_gain = 2; + gphy->lna_lod_gain = 1; + gphy->pga_gain = 2; } else if (max_rx_gain >= 0x12) { - phy->lna_lod_gain = 1; - phy->pga_gain = 1; + gphy->lna_lod_gain = 1; + gphy->pga_gain = 1; } else if (max_rx_gain >= 0xF) { - phy->lna_lod_gain = 1; - phy->pga_gain = 0; + gphy->lna_lod_gain = 1; + gphy->pga_gain = 0; } else { - phy->lna_lod_gain = 0; - phy->pga_gain = 0; + gphy->lna_lod_gain = 0; + gphy->pga_gain = 0; } } tmp = b43_radio_read16(dev, 0x7A); - if (phy->lna_lod_gain == 0) + if (gphy->lna_lod_gain == 0) tmp &= ~0x0008; else tmp |= 0x0008; @@ -392,10 +395,11 @@ static void lo_measure_setup(struct b43_wldev *dev, { struct ssb_sprom *sprom = &dev->dev->bus->sprom; struct b43_phy *phy = &dev->phy; - struct b43_txpower_lo_control *lo = phy->lo_control; + struct b43_phy_g *gphy = phy->g; + struct b43_txpower_lo_control *lo = gphy->lo_control; u16 tmp; - if (b43_has_hardware_pctl(phy)) { + if (b43_has_hardware_pctl(dev)) { sav->phy_lo_mask = b43_phy_read(dev, B43_PHY_LO_MASK); sav->phy_extg_01 = b43_phy_read(dev, B43_PHY_EXTG(0x01)); sav->phy_dacctl_hwpctl = b43_phy_read(dev, B43_PHY_DACCTL); @@ -496,7 +500,7 @@ static void lo_measure_setup(struct b43_wldev *dev, b43_phy_write(dev, B43_PHY_CCK(0x2B), 0x0802); if (phy->rev >= 2) b43_dummy_transmission(dev); - b43_radio_selectchannel(dev, 6, 0); + b43_gphy_channel_switch(dev, 6, 0); b43_radio_read16(dev, 0x51); /* dummy read */ if (phy->type == B43_PHYTYPE_G) b43_phy_write(dev, B43_PHY_CCK(0x2F), 0); @@ -520,18 +524,19 @@ static void lo_measure_restore(struct b43_wldev *dev, struct lo_g_saved_values *sav) { struct b43_phy *phy = &dev->phy; + struct b43_phy_g *gphy = phy->g; u16 tmp; if (phy->rev >= 2) { b43_phy_write(dev, B43_PHY_PGACTL, 0xE300); - tmp = (phy->pga_gain << 8); + tmp = (gphy->pga_gain << 8); b43_phy_write(dev, B43_PHY_RFOVERVAL, tmp | 0xA0); udelay(5); b43_phy_write(dev, B43_PHY_RFOVERVAL, tmp | 0xA2); udelay(2); b43_phy_write(dev, B43_PHY_RFOVERVAL, tmp | 0xA3); } else { - tmp = (phy->pga_gain | 0xEFA0); + tmp = (gphy->pga_gain | 0xEFA0); b43_phy_write(dev, B43_PHY_PGACTL, tmp); } if (phy->type == B43_PHYTYPE_G) { @@ -572,7 +577,7 @@ static void lo_measure_restore(struct b43_wldev *dev, b43_phy_write(dev, B43_PHY_CCK(0x3E), sav->phy_cck_3E); b43_phy_write(dev, B43_PHY_CRS0, sav->phy_crs0); } - if (b43_has_hardware_pctl(phy)) { + if (b43_has_hardware_pctl(dev)) { tmp = (sav->phy_lo_mask & 0xBFFF); b43_phy_write(dev, B43_PHY_LO_MASK, tmp); b43_phy_write(dev, B43_PHY_EXTG(0x01), sav->phy_extg_01); @@ -580,7 +585,7 @@ static void lo_measure_restore(struct b43_wldev *dev, b43_phy_write(dev, B43_PHY_CCK(0x14), sav->phy_cck_14); b43_phy_write(dev, B43_PHY_HPWR_TSSICTL, sav->phy_hpwr_tssictl); } - b43_radio_selectchannel(dev, sav->old_channel, 1); + b43_gphy_channel_switch(dev, sav->old_channel, 1); } struct b43_lo_g_statemachine { @@ -597,6 +602,7 @@ static int lo_probe_possible_loctls(struct b43_wldev *dev, struct b43_lo_g_statemachine *d) { struct b43_phy *phy = &dev->phy; + struct b43_phy_g *gphy = phy->g; struct b43_loctl test_loctl; struct b43_loctl orig_loctl; struct b43_loctl prev_loctl = { @@ -646,9 +652,9 @@ static int lo_probe_possible_loctls(struct b43_wldev *dev, test_loctl.q != prev_loctl.q) && (abs(test_loctl.i) <= 16 && abs(test_loctl.q) <= 16)) { b43_lo_write(dev, &test_loctl); - feedth = lo_measure_feedthrough(dev, phy->lna_gain, - phy->pga_gain, - phy->trsw_rx_gain); + feedth = lo_measure_feedthrough(dev, gphy->lna_gain, + gphy->pga_gain, + gphy->trsw_rx_gain); if (feedth < d->lowest_feedth) { memcpy(probe_loctl, &test_loctl, sizeof(struct b43_loctl)); @@ -677,6 +683,7 @@ static void lo_probe_loctls_statemachine(struct b43_wldev *dev, int *max_rx_gain) { struct b43_phy *phy = &dev->phy; + struct b43_phy_g *gphy = phy->g; struct b43_lo_g_statemachine d; u16 feedth; int found_lower; @@ -693,17 +700,17 @@ static void lo_probe_loctls_statemachine(struct b43_wldev *dev, max_repeat = 4; do { b43_lo_write(dev, &d.min_loctl); - feedth = lo_measure_feedthrough(dev, phy->lna_gain, - phy->pga_gain, - phy->trsw_rx_gain); + feedth = lo_measure_feedthrough(dev, gphy->lna_gain, + gphy->pga_gain, + gphy->trsw_rx_gain); if (feedth < 0x258) { if (feedth >= 0x12C) *max_rx_gain += 6; else *max_rx_gain += 3; - feedth = lo_measure_feedthrough(dev, phy->lna_gain, - phy->pga_gain, - phy->trsw_rx_gain); + feedth = lo_measure_feedthrough(dev, gphy->lna_gain, + gphy->pga_gain, + gphy->trsw_rx_gain); } d.lowest_feedth = feedth; @@ -752,6 +759,7 @@ struct b43_lo_calib * b43_calibrate_lo_setting(struct b43_wldev *dev, const struct b43_rfatt *rfatt) { struct b43_phy *phy = &dev->phy; + struct b43_phy_g *gphy = phy->g; struct b43_loctl loctl = { .i = 0, .q = 0, @@ -782,11 +790,11 @@ struct b43_lo_calib * b43_calibrate_lo_setting(struct b43_wldev *dev, if (rfatt->with_padmix) max_rx_gain -= pad_mix_gain; if (has_loopback_gain(phy)) - max_rx_gain += phy->max_lb_gain; + max_rx_gain += gphy->max_lb_gain; lo_measure_gain_values(dev, max_rx_gain, has_loopback_gain(phy)); - b43_phy_set_baseband_attenuation(dev, bbatt->att); + b43_gphy_set_baseband_attenuation(dev, bbatt->att); lo_probe_loctls_statemachine(dev, &loctl, &max_rx_gain); lo_measure_restore(dev, &saved_regs); @@ -820,7 +828,7 @@ struct b43_lo_calib * b43_get_calib_lo_settings(struct b43_wldev *dev, const struct b43_bbatt *bbatt, const struct b43_rfatt *rfatt) { - struct b43_txpower_lo_control *lo = dev->phy.lo_control; + struct b43_txpower_lo_control *lo = dev->phy.g->lo_control; struct b43_lo_calib *c; c = b43_find_lo_calib(lo, bbatt, rfatt); @@ -839,7 +847,8 @@ struct b43_lo_calib * b43_get_calib_lo_settings(struct b43_wldev *dev, void b43_gphy_dc_lt_init(struct b43_wldev *dev, bool update_all) { struct b43_phy *phy = &dev->phy; - struct b43_txpower_lo_control *lo = phy->lo_control; + struct b43_phy_g *gphy = phy->g; + struct b43_txpower_lo_control *lo = gphy->lo_control; int i; int rf_offset, bb_offset; const struct b43_rfatt *rfatt; @@ -917,14 +926,14 @@ static inline void b43_lo_fixup_rfatt(struct b43_rfatt *rf) void b43_lo_g_adjust(struct b43_wldev *dev) { - struct b43_phy *phy = &dev->phy; + struct b43_phy_g *gphy = dev->phy.g; struct b43_lo_calib *cal; struct b43_rfatt rf; - memcpy(&rf, &phy->rfatt, sizeof(rf)); + memcpy(&rf, &gphy->rfatt, sizeof(rf)); b43_lo_fixup_rfatt(&rf); - cal = b43_get_calib_lo_settings(dev, &phy->bbatt, &rf); + cal = b43_get_calib_lo_settings(dev, &gphy->bbatt, &rf); if (!cal) return; b43_lo_write(dev, &cal->ctl); @@ -952,7 +961,8 @@ void b43_lo_g_adjust_to(struct b43_wldev *dev, void b43_lo_g_maintanance_work(struct b43_wldev *dev) { struct b43_phy *phy = &dev->phy; - struct b43_txpower_lo_control *lo = phy->lo_control; + struct b43_phy_g *gphy = phy->g; + struct b43_txpower_lo_control *lo = gphy->lo_control; unsigned long now; unsigned long expire; struct b43_lo_calib *cal, *tmp; @@ -962,7 +972,7 @@ void b43_lo_g_maintanance_work(struct b43_wldev *dev) if (!lo) return; now = jiffies; - hwpctl = b43_has_hardware_pctl(phy); + hwpctl = b43_has_hardware_pctl(dev); if (hwpctl) { /* Read the power vector and update it, if needed. */ @@ -983,8 +993,8 @@ void b43_lo_g_maintanance_work(struct b43_wldev *dev) if (!time_before(cal->calib_time, expire)) continue; /* This item expired. */ - if (b43_compare_bbatt(&cal->bbatt, &phy->bbatt) && - b43_compare_rfatt(&cal->rfatt, &phy->rfatt)) { + if (b43_compare_bbatt(&cal->bbatt, &gphy->bbatt) && + b43_compare_rfatt(&cal->rfatt, &gphy->rfatt)) { B43_WARN_ON(current_item_expired); current_item_expired = 1; } @@ -1002,7 +1012,7 @@ void b43_lo_g_maintanance_work(struct b43_wldev *dev) /* Recalibrate currently used LO setting. */ if (b43_debug(dev, B43_DBG_LO)) b43dbg(dev->wl, "LO: Recalibrating current LO setting\n"); - cal = b43_calibrate_lo_setting(dev, &phy->bbatt, &phy->rfatt); + cal = b43_calibrate_lo_setting(dev, &gphy->bbatt, &gphy->rfatt); if (cal) { list_add(&cal->list, &lo->calib_list); b43_lo_write(dev, &cal->ctl); @@ -1013,7 +1023,7 @@ void b43_lo_g_maintanance_work(struct b43_wldev *dev) void b43_lo_g_cleanup(struct b43_wldev *dev) { - struct b43_txpower_lo_control *lo = dev->phy.lo_control; + struct b43_txpower_lo_control *lo = dev->phy.g->lo_control; struct b43_lo_calib *cal, *tmp; if (!lo) @@ -1027,9 +1037,7 @@ void b43_lo_g_cleanup(struct b43_wldev *dev) /* LO Initialization */ void b43_lo_g_init(struct b43_wldev *dev) { - struct b43_phy *phy = &dev->phy; - - if (b43_has_hardware_pctl(phy)) { + if (b43_has_hardware_pctl(dev)) { lo_read_power_vector(dev); b43_gphy_dc_lt_init(dev, 1); } diff --git a/drivers/net/wireless/b43/lo.h b/drivers/net/wireless/b43/lo.h index 1da321cabc1..3b27e20eff8 100644 --- a/drivers/net/wireless/b43/lo.h +++ b/drivers/net/wireless/b43/lo.h @@ -1,7 +1,9 @@ #ifndef B43_LO_H_ #define B43_LO_H_ -#include "phy.h" +/* G-PHY Local Oscillator */ + +#include "phy_g.h" struct b43_wldev; diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c index 7205a936ec7..c836beceb10 100644 --- a/drivers/net/wireless/b43/main.c +++ b/drivers/net/wireless/b43/main.c @@ -44,8 +44,9 @@ #include "b43.h" #include "main.h" #include "debugfs.h" -#include "phy.h" -#include "nphy.h" +#include "phy_common.h" +#include "phy_g.h" +#include "phy_n.h" #include "dma.h" #include "pio.h" #include "sysfs.h" @@ -1051,23 +1052,6 @@ void b43_power_saving_ctl_bits(struct b43_wldev *dev, unsigned int ps_flags) } } -/* Turn the Analog ON/OFF */ -static void b43_switch_analog(struct b43_wldev *dev, int on) -{ - switch (dev->phy.type) { - case B43_PHYTYPE_A: - case B43_PHYTYPE_G: - b43_write16(dev, B43_MMIO_PHY0, on ? 0 : 0xF4); - break; - case B43_PHYTYPE_N: - b43_phy_write(dev, B43_NPHY_AFECTL_OVER, - on ? 0 : 0x7FFF); - break; - default: - B43_WARN_ON(1); - } -} - void b43_wireless_core_reset(struct b43_wldev *dev, u32 flags) { u32 tmslow; @@ -1090,8 +1074,12 @@ void b43_wireless_core_reset(struct b43_wldev *dev, u32 flags) ssb_read32(dev->dev, SSB_TMSLOW); /* flush */ msleep(1); - /* Turn Analog ON */ - b43_switch_analog(dev, 1); + /* Turn Analog ON, but only if we already know the PHY-type. + * This protects against very early setup where we don't know the + * PHY-type, yet. wireless_core_reset will be called once again later, + * when we know the PHY-type. */ + if (dev->phy.ops) + dev->phy.ops->switch_analog(dev, 1); macctl = b43_read32(dev, B43_MMIO_MACCTL); macctl &= ~B43_MACCTL_GMODE; @@ -1174,6 +1162,8 @@ static void b43_calculate_link_quality(struct b43_wldev *dev) { /* Top half of Link Quality calculation. */ + if (dev->phy.type != B43_PHYTYPE_G) + return; if (dev->noisecalc.calculation_running) return; dev->noisecalc.calculation_running = 1; @@ -1184,7 +1174,7 @@ static void b43_calculate_link_quality(struct b43_wldev *dev) static void handle_irq_noise(struct b43_wldev *dev) { - struct b43_phy *phy = &dev->phy; + struct b43_phy_g *phy = dev->phy.g; u16 tmp; u8 noise[4]; u8 i, j; @@ -1192,6 +1182,9 @@ static void handle_irq_noise(struct b43_wldev *dev) /* Bottom half of Link Quality calculation. */ + if (dev->phy.type != B43_PHYTYPE_G) + return; + /* Possible race condition: It might be possible that the user * changed to a different channel in the meantime since we * started the calculation. We ignore that fact, since it's @@ -2688,9 +2681,8 @@ static void b43_mgmtframe_txantenna(struct b43_wldev *dev, int antenna) /* This is the opposite of b43_chip_init() */ static void b43_chip_exit(struct b43_wldev *dev) { - b43_radio_turn_off(dev, 1); + b43_phy_exit(dev); b43_gpio_cleanup(dev); - b43_lo_g_cleanup(dev); /* firmware is released later */ } @@ -2700,7 +2692,7 @@ static void b43_chip_exit(struct b43_wldev *dev) static int b43_chip_init(struct b43_wldev *dev) { struct b43_phy *phy = &dev->phy; - int err, tmp; + int err; u32 value32, macctl; u16 value16; @@ -2725,19 +2717,20 @@ static int b43_chip_init(struct b43_wldev *dev) err = b43_upload_initvals(dev); if (err) goto err_gpio_clean; - b43_radio_turn_on(dev); - b43_write16(dev, 0x03E6, 0x0000); + /* Turn the Analog on and initialize the PHY. */ + phy->ops->switch_analog(dev, 1); err = b43_phy_init(dev); if (err) - goto err_radio_off; + goto err_gpio_clean; - /* Select initial Interference Mitigation. */ - tmp = phy->interfmode; - phy->interfmode = B43_INTERFMODE_NONE; - b43_radio_set_interference_mitigation(dev, tmp); + /* Disable Interference Mitigation. */ + if (phy->ops->interf_mitigation) + phy->ops->interf_mitigation(dev, B43_INTERFMODE_NONE); - b43_set_rx_antenna(dev, B43_ANTENNA_DEFAULT); + /* Select the antennae */ + if (phy->ops->set_rx_antenna) + phy->ops->set_rx_antenna(dev, B43_ANTENNA_DEFAULT); b43_mgmtframe_txantenna(dev, B43_ANTENNA_DEFAULT); if (phy->type == B43_PHYTYPE_B) { @@ -2790,8 +2783,6 @@ static int b43_chip_init(struct b43_wldev *dev) out: return err; -err_radio_off: - b43_radio_turn_off(dev, 1); err_gpio_clean: b43_gpio_cleanup(dev); return err; @@ -2799,25 +2790,13 @@ err_gpio_clean: static void b43_periodic_every60sec(struct b43_wldev *dev) { - struct b43_phy *phy = &dev->phy; + const struct b43_phy_operations *ops = dev->phy.ops; - if (phy->type != B43_PHYTYPE_G) - return; - if (dev->dev->bus->sprom.boardflags_lo & B43_BFL_RSSI) { - b43_mac_suspend(dev); - b43_calc_nrssi_slope(dev); - if ((phy->radio_ver == 0x2050) && (phy->radio_rev == 8)) { - u8 old_chan = phy->channel; - - /* VCO Calibration */ - if (old_chan >= 8) - b43_radio_selectchannel(dev, 1, 0); - else - b43_radio_selectchannel(dev, 13, 0); - b43_radio_selectchannel(dev, old_chan, 0); - } - b43_mac_enable(dev); - } + if (ops->pwork_60sec) + ops->pwork_60sec(dev); + + /* Force check the TX power emission now. */ + b43_phy_txpower_check(dev, B43_TXPWR_IGNORE_TIME); } static void b43_periodic_every30sec(struct b43_wldev *dev) @@ -2845,32 +2824,8 @@ static void b43_periodic_every15sec(struct b43_wldev *dev) } } - if (phy->type == B43_PHYTYPE_G) { - //TODO: update_aci_moving_average - if (phy->aci_enable && phy->aci_wlan_automatic) { - b43_mac_suspend(dev); - if (!phy->aci_enable && 1 /*TODO: not scanning? */ ) { - if (0 /*TODO: bunch of conditions */ ) { - b43_radio_set_interference_mitigation - (dev, B43_INTERFMODE_MANUALWLAN); - } - } else if (1 /*TODO*/) { - /* - if ((aci_average > 1000) && !(b43_radio_aci_scan(dev))) { - b43_radio_set_interference_mitigation(dev, - B43_INTERFMODE_NONE); - } - */ - } - b43_mac_enable(dev); - } else if (phy->interfmode == B43_INTERFMODE_NONWLAN && - phy->rev == 1) { - //TODO: implement rev1 workaround - } - } - b43_phy_xmitpower(dev); //FIXME: unless scanning? - b43_lo_g_maintanance_work(dev); - //TODO for APHY (temperature?) + if (phy->ops->pwork_15sec) + phy->ops->pwork_15sec(dev); atomic_set(&phy->txerr_cnt, B43_PHY_TX_BADNESS_LIMIT); wmb(); @@ -3401,7 +3356,7 @@ static int b43_op_config(struct ieee80211_hw *hw, struct ieee80211_conf *conf) /* Switch to the requested channel. * The firmware takes care of races with the TX handler. */ if (conf->channel->hw_value != phy->channel) - b43_radio_selectchannel(dev, conf->channel->hw_value, 0); + b43_switch_channel(dev, conf->channel->hw_value); /* Enable/Disable ShortSlot timing. */ if ((!!(conf->flags & IEEE80211_CONF_SHORT_SLOT_TIME)) != @@ -3417,17 +3372,21 @@ static int b43_op_config(struct ieee80211_hw *hw, struct ieee80211_conf *conf) /* Adjust the desired TX power level. */ if (conf->power_level != 0) { - if (conf->power_level != phy->power_level) { - phy->power_level = conf->power_level; - b43_phy_xmitpower(dev); + spin_lock_irqsave(&wl->irq_lock, flags); + if (conf->power_level != phy->desired_txpower) { + phy->desired_txpower = conf->power_level; + b43_phy_txpower_check(dev, B43_TXPWR_IGNORE_TIME | + B43_TXPWR_IGNORE_TSSI); } + spin_unlock_irqrestore(&wl->irq_lock, flags); } /* Antennas for RX and management frame TX. */ antenna = b43_antenna_from_ieee80211(dev, conf->antenna_sel_tx); b43_mgmtframe_txantenna(dev, antenna); antenna = b43_antenna_from_ieee80211(dev, conf->antenna_sel_rx); - b43_set_rx_antenna(dev, antenna); + if (phy->ops->set_rx_antenna) + phy->ops->set_rx_antenna(dev, antenna); /* Update templates for AP/mesh mode. */ if (b43_is_mode(wl, IEEE80211_IF_TYPE_AP) || @@ -3436,7 +3395,7 @@ static int b43_op_config(struct ieee80211_hw *hw, struct ieee80211_conf *conf) if (!!conf->radio_enabled != phy->radio_on) { if (conf->radio_enabled) { - b43_radio_turn_on(dev); + b43_software_rfkill(dev, RFKILL_STATE_UNBLOCKED); b43info(dev->wl, "Radio turned on by software\n"); if (!dev->radio_hw_enable) { b43info(dev->wl, "The hardware RF-kill button " @@ -3444,7 +3403,7 @@ static int b43_op_config(struct ieee80211_hw *hw, struct ieee80211_conf *conf) "Press the button to turn it on.\n"); } } else { - b43_radio_turn_off(dev, 0); + b43_software_rfkill(dev, RFKILL_STATE_SOFT_BLOCKED); b43info(dev->wl, "Radio turned off by software\n"); } } @@ -3818,48 +3777,10 @@ static int b43_phy_versioning(struct b43_wldev *dev) static void setup_struct_phy_for_init(struct b43_wldev *dev, struct b43_phy *phy) { - struct b43_txpower_lo_control *lo; - int i; - - memset(phy->minlowsig, 0xFF, sizeof(phy->minlowsig)); - memset(phy->minlowsigpos, 0, sizeof(phy->minlowsigpos)); - - phy->aci_enable = 0; - phy->aci_wlan_automatic = 0; - phy->aci_hw_rssi = 0; - - phy->radio_off_context.valid = 0; - - lo = phy->lo_control; - if (lo) { - memset(lo, 0, sizeof(*(phy->lo_control))); - lo->tx_bias = 0xFF; - INIT_LIST_HEAD(&lo->calib_list); - } - phy->max_lb_gain = 0; - phy->trsw_rx_gain = 0; - phy->txpwr_offset = 0; - - /* NRSSI */ - phy->nrssislope = 0; - for (i = 0; i < ARRAY_SIZE(phy->nrssi); i++) - phy->nrssi[i] = -1000; - for (i = 0; i < ARRAY_SIZE(phy->nrssi_lt); i++) - phy->nrssi_lt[i] = i; - - phy->lofcal = 0xFFFF; - phy->initval = 0xFFFF; - - phy->interfmode = B43_INTERFMODE_NONE; - phy->channel = 0xFF; - phy->hardware_power_control = !!modparam_hwpctl; - + phy->next_txpwr_check_time = jiffies; /* PHY TX errors counter. */ atomic_set(&phy->txerr_cnt, B43_PHY_TX_BADNESS_LIMIT); - - /* OFDM-table address caching. */ - phy->ofdmtab_addr_direction = B43_OFDMTAB_DIRECTION_UNKNOWN; } static void setup_struct_wldev_for_init(struct b43_wldev *dev) @@ -3995,7 +3916,6 @@ static void b43_set_pretbtt(struct b43_wldev *dev) /* Locking: wl->mutex */ static void b43_wireless_core_exit(struct b43_wldev *dev) { - struct b43_phy *phy = &dev->phy; u32 macctl; B43_WARN_ON(b43_status(dev) > B43_STAT_INITIALIZED); @@ -4016,12 +3936,7 @@ static void b43_wireless_core_exit(struct b43_wldev *dev) b43_dma_free(dev); b43_pio_free(dev); b43_chip_exit(dev); - b43_radio_turn_off(dev, 1); - b43_switch_analog(dev, 0); - if (phy->dyn_tssi_tbl) - kfree(phy->tssi2dbm); - kfree(phy->lo_control); - phy->lo_control = NULL; + dev->phy.ops->switch_analog(dev, 0); if (dev->wl->current_beacon) { dev_kfree_skb_any(dev->wl->current_beacon); dev->wl->current_beacon = NULL; @@ -4052,29 +3967,23 @@ static int b43_wireless_core_init(struct b43_wldev *dev) b43_wireless_core_reset(dev, tmp); } - if ((phy->type == B43_PHYTYPE_B) || (phy->type == B43_PHYTYPE_G)) { - phy->lo_control = - kzalloc(sizeof(*(phy->lo_control)), GFP_KERNEL); - if (!phy->lo_control) { - err = -ENOMEM; - goto err_busdown; - } - } + /* Reset all data structures. */ setup_struct_wldev_for_init(dev); - - err = b43_phy_init_tssi2dbm_table(dev); - if (err) - goto err_kfree_lo_control; + phy->ops->prepare_structs(dev); /* Enable IRQ routing to this device. */ ssb_pcicore_dev_irqvecs_enable(&bus->pcicore, dev->dev); b43_imcfglo_timeouts_workaround(dev); b43_bluetooth_coext_disable(dev); - b43_phy_early_init(dev); + if (phy->ops->prepare_hardware) { + err = phy->ops->prepare_hardware(dev); + if (err) + goto err_busdown; + } err = b43_chip_init(dev); if (err) - goto err_kfree_tssitbl; + goto err_busdown; b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_WLCOREREV, dev->dev->id.revision); hf = b43_hf_read(dev); @@ -4140,15 +4049,9 @@ static int b43_wireless_core_init(struct b43_wldev *dev) out: return err; - err_chip_exit: +err_chip_exit: b43_chip_exit(dev); - err_kfree_tssitbl: - if (phy->dyn_tssi_tbl) - kfree(phy->tssi2dbm); - err_kfree_lo_control: - kfree(phy->lo_control); - phy->lo_control = NULL; - err_busdown: +err_busdown: ssb_bus_may_powerdown(bus); B43_WARN_ON(b43_status(dev) != B43_STAT_UNINIT); return err; @@ -4291,6 +4194,8 @@ static void b43_op_stop(struct ieee80211_hw *hw) b43_wireless_core_stop(dev); b43_wireless_core_exit(dev); mutex_unlock(&wl->mutex); + + cancel_work_sync(&(wl->txpower_adjust_work)); } static int b43_op_set_retry_limit(struct ieee80211_hw *hw, @@ -4422,6 +4327,7 @@ static void b43_wireless_core_detach(struct b43_wldev *dev) /* We release firmware that late to not be required to re-request * is all the time when we reinit the core. */ b43_release_firmware(dev); + b43_phy_free(dev); } static int b43_wireless_core_attach(struct b43_wldev *dev) @@ -4495,30 +4401,35 @@ static int b43_wireless_core_attach(struct b43_wldev *dev) } } + err = b43_phy_allocate(dev); + if (err) + goto err_powerdown; + dev->phy.gmode = have_2ghz_phy; tmp = dev->phy.gmode ? B43_TMSLOW_GMODE : 0; b43_wireless_core_reset(dev, tmp); err = b43_validate_chipaccess(dev); if (err) - goto err_powerdown; + goto err_phy_free; err = b43_setup_bands(dev, have_2ghz_phy, have_5ghz_phy); if (err) - goto err_powerdown; + goto err_phy_free; /* Now set some default "current_dev" */ if (!wl->current_dev) wl->current_dev = dev; INIT_WORK(&dev->restart_work, b43_chip_reset); - b43_radio_turn_off(dev, 1); - b43_switch_analog(dev, 0); + dev->phy.ops->switch_analog(dev, 0); ssb_device_disable(dev->dev, 0); ssb_bus_may_powerdown(bus); out: return err; +err_phy_free: + b43_phy_free(dev); err_powerdown: ssb_bus_may_powerdown(bus); return err; @@ -4650,6 +4561,13 @@ static int b43_wireless_init(struct ssb_device *dev) IEEE80211_HW_SIGNAL_DBM | IEEE80211_HW_NOISE_DBM; + hw->wiphy->interface_modes = + BIT(NL80211_IFTYPE_AP) | + BIT(NL80211_IFTYPE_MESH_POINT) | + BIT(NL80211_IFTYPE_STATION) | + BIT(NL80211_IFTYPE_WDS) | + BIT(NL80211_IFTYPE_ADHOC); + hw->queues = b43_modparam_qos ? 4 : 1; SET_IEEE80211_DEV(hw, dev->dev); if (is_valid_ether_addr(sprom->et1mac)) @@ -4669,6 +4587,7 @@ static int b43_wireless_init(struct ssb_device *dev) INIT_LIST_HEAD(&wl->devlist); INIT_WORK(&wl->qos_update_work, b43_qos_update_work); INIT_WORK(&wl->beacon_update_trigger, b43_beacon_update_trigger_work); + INIT_WORK(&wl->txpower_adjust_work, b43_phy_txpower_adjust_work); ssb_set_devtypedata(dev, wl); b43info(wl, "Broadcom %04X WLAN found\n", dev->bus->chip_id); diff --git a/drivers/net/wireless/b43/phy.h b/drivers/net/wireless/b43/phy.h deleted file mode 100644 index 4aab1090352..00000000000 --- a/drivers/net/wireless/b43/phy.h +++ /dev/null @@ -1,340 +0,0 @@ -#ifndef B43_PHY_H_ -#define B43_PHY_H_ - -#include <linux/types.h> - -struct b43_wldev; -struct b43_phy; - -/*** PHY Registers ***/ - -/* Routing */ -#define B43_PHYROUTE 0x0C00 /* PHY register routing bits mask */ -#define B43_PHYROUTE_BASE 0x0000 /* Base registers */ -#define B43_PHYROUTE_OFDM_GPHY 0x0400 /* OFDM register routing for G-PHYs */ -#define B43_PHYROUTE_EXT_GPHY 0x0800 /* Extended G-PHY registers */ -#define B43_PHYROUTE_N_BMODE 0x0C00 /* N-PHY BMODE registers */ - -/* CCK (B-PHY) registers. */ -#define B43_PHY_CCK(reg) ((reg) | B43_PHYROUTE_BASE) -/* N-PHY registers. */ -#define B43_PHY_N(reg) ((reg) | B43_PHYROUTE_BASE) -/* N-PHY BMODE registers. */ -#define B43_PHY_N_BMODE(reg) ((reg) | B43_PHYROUTE_N_BMODE) -/* OFDM (A-PHY) registers. */ -#define B43_PHY_OFDM(reg) ((reg) | B43_PHYROUTE_OFDM_GPHY) -/* Extended G-PHY registers. */ -#define B43_PHY_EXTG(reg) ((reg) | B43_PHYROUTE_EXT_GPHY) - -/* OFDM (A) PHY Registers */ -#define B43_PHY_VERSION_OFDM B43_PHY_OFDM(0x00) /* Versioning register for A-PHY */ -#define B43_PHY_BBANDCFG B43_PHY_OFDM(0x01) /* Baseband config */ -#define B43_PHY_BBANDCFG_RXANT 0x180 /* RX Antenna selection */ -#define B43_PHY_BBANDCFG_RXANT_SHIFT 7 -#define B43_PHY_PWRDOWN B43_PHY_OFDM(0x03) /* Powerdown */ -#define B43_PHY_CRSTHRES1_R1 B43_PHY_OFDM(0x06) /* CRS Threshold 1 (phy.rev 1 only) */ -#define B43_PHY_LNAHPFCTL B43_PHY_OFDM(0x1C) /* LNA/HPF control */ -#define B43_PHY_LPFGAINCTL B43_PHY_OFDM(0x20) /* LPF Gain control */ -#define B43_PHY_ADIVRELATED B43_PHY_OFDM(0x27) /* FIXME rename */ -#define B43_PHY_CRS0 B43_PHY_OFDM(0x29) -#define B43_PHY_CRS0_EN 0x4000 -#define B43_PHY_PEAK_COUNT B43_PHY_OFDM(0x30) -#define B43_PHY_ANTDWELL B43_PHY_OFDM(0x2B) /* Antenna dwell */ -#define B43_PHY_ANTDWELL_AUTODIV1 0x0100 /* Automatic RX diversity start antenna */ -#define B43_PHY_ENCORE B43_PHY_OFDM(0x49) /* "Encore" (RangeMax / BroadRange) */ -#define B43_PHY_ENCORE_EN 0x0200 /* Encore enable */ -#define B43_PHY_LMS B43_PHY_OFDM(0x55) -#define B43_PHY_OFDM61 B43_PHY_OFDM(0x61) /* FIXME rename */ -#define B43_PHY_OFDM61_10 0x0010 /* FIXME rename */ -#define B43_PHY_IQBAL B43_PHY_OFDM(0x69) /* I/Q balance */ -#define B43_PHY_BBTXDC_BIAS B43_PHY_OFDM(0x6B) /* Baseband TX DC bias */ -#define B43_PHY_OTABLECTL B43_PHY_OFDM(0x72) /* OFDM table control (see below) */ -#define B43_PHY_OTABLEOFF 0x03FF /* OFDM table offset (see below) */ -#define B43_PHY_OTABLENR 0xFC00 /* OFDM table number (see below) */ -#define B43_PHY_OTABLENR_SHIFT 10 -#define B43_PHY_OTABLEI B43_PHY_OFDM(0x73) /* OFDM table data I */ -#define B43_PHY_OTABLEQ B43_PHY_OFDM(0x74) /* OFDM table data Q */ -#define B43_PHY_HPWR_TSSICTL B43_PHY_OFDM(0x78) /* Hardware power TSSI control */ -#define B43_PHY_ADCCTL B43_PHY_OFDM(0x7A) /* ADC control */ -#define B43_PHY_IDLE_TSSI B43_PHY_OFDM(0x7B) -#define B43_PHY_A_TEMP_SENSE B43_PHY_OFDM(0x7C) /* A PHY temperature sense */ -#define B43_PHY_NRSSITHRES B43_PHY_OFDM(0x8A) /* NRSSI threshold */ -#define B43_PHY_ANTWRSETT B43_PHY_OFDM(0x8C) /* Antenna WR settle */ -#define B43_PHY_ANTWRSETT_ARXDIV 0x2000 /* Automatic RX diversity enabled */ -#define B43_PHY_CLIPPWRDOWNT B43_PHY_OFDM(0x93) /* Clip powerdown threshold */ -#define B43_PHY_OFDM9B B43_PHY_OFDM(0x9B) /* FIXME rename */ -#define B43_PHY_N1P1GAIN B43_PHY_OFDM(0xA0) -#define B43_PHY_P1P2GAIN B43_PHY_OFDM(0xA1) -#define B43_PHY_N1N2GAIN B43_PHY_OFDM(0xA2) -#define B43_PHY_CLIPTHRES B43_PHY_OFDM(0xA3) -#define B43_PHY_CLIPN1P2THRES B43_PHY_OFDM(0xA4) -#define B43_PHY_CCKSHIFTBITS_WA B43_PHY_OFDM(0xA5) /* CCK shiftbits workaround, FIXME rename */ -#define B43_PHY_CCKSHIFTBITS B43_PHY_OFDM(0xA7) /* FIXME rename */ -#define B43_PHY_DIVSRCHIDX B43_PHY_OFDM(0xA8) /* Divider search gain/index */ -#define B43_PHY_CLIPP2THRES B43_PHY_OFDM(0xA9) -#define B43_PHY_CLIPP3THRES B43_PHY_OFDM(0xAA) -#define B43_PHY_DIVP1P2GAIN B43_PHY_OFDM(0xAB) -#define B43_PHY_DIVSRCHGAINBACK B43_PHY_OFDM(0xAD) /* Divider search gain back */ -#define B43_PHY_DIVSRCHGAINCHNG B43_PHY_OFDM(0xAE) /* Divider search gain change */ -#define B43_PHY_CRSTHRES1 B43_PHY_OFDM(0xC0) /* CRS Threshold 1 (phy.rev >= 2 only) */ -#define B43_PHY_CRSTHRES2 B43_PHY_OFDM(0xC1) /* CRS Threshold 2 (phy.rev >= 2 only) */ -#define B43_PHY_TSSIP_LTBASE B43_PHY_OFDM(0x380) /* TSSI power lookup table base */ -#define B43_PHY_DC_LTBASE B43_PHY_OFDM(0x3A0) /* DC lookup table base */ -#define B43_PHY_GAIN_LTBASE B43_PHY_OFDM(0x3C0) /* Gain lookup table base */ - -/* CCK (B) PHY Registers */ -#define B43_PHY_VERSION_CCK B43_PHY_CCK(0x00) /* Versioning register for B-PHY */ -#define B43_PHY_CCKBBANDCFG B43_PHY_CCK(0x01) /* Contains antenna 0/1 control bit */ -#define B43_PHY_PGACTL B43_PHY_CCK(0x15) /* PGA control */ -#define B43_PHY_PGACTL_LPF 0x1000 /* Low pass filter (?) */ -#define B43_PHY_PGACTL_LOWBANDW 0x0040 /* Low bandwidth flag */ -#define B43_PHY_PGACTL_UNKNOWN 0xEFA0 -#define B43_PHY_FBCTL1 B43_PHY_CCK(0x18) /* Frequency bandwidth control 1 */ -#define B43_PHY_ITSSI B43_PHY_CCK(0x29) /* Idle TSSI */ -#define B43_PHY_LO_LEAKAGE B43_PHY_CCK(0x2D) /* Measured LO leakage */ -#define B43_PHY_ENERGY B43_PHY_CCK(0x33) /* Energy */ -#define B43_PHY_SYNCCTL B43_PHY_CCK(0x35) -#define B43_PHY_FBCTL2 B43_PHY_CCK(0x38) /* Frequency bandwidth control 2 */ -#define B43_PHY_DACCTL B43_PHY_CCK(0x60) /* DAC control */ -#define B43_PHY_RCCALOVER B43_PHY_CCK(0x78) /* RC calibration override */ - -/* Extended G-PHY Registers */ -#define B43_PHY_CLASSCTL B43_PHY_EXTG(0x02) /* Classify control */ -#define B43_PHY_GTABCTL B43_PHY_EXTG(0x03) /* G-PHY table control (see below) */ -#define B43_PHY_GTABOFF 0x03FF /* G-PHY table offset (see below) */ -#define B43_PHY_GTABNR 0xFC00 /* G-PHY table number (see below) */ -#define B43_PHY_GTABNR_SHIFT 10 -#define B43_PHY_GTABDATA B43_PHY_EXTG(0x04) /* G-PHY table data */ -#define B43_PHY_LO_MASK B43_PHY_EXTG(0x0F) /* Local Oscillator control mask */ -#define B43_PHY_LO_CTL B43_PHY_EXTG(0x10) /* Local Oscillator control */ -#define B43_PHY_RFOVER B43_PHY_EXTG(0x11) /* RF override */ -#define B43_PHY_RFOVERVAL B43_PHY_EXTG(0x12) /* RF override value */ -#define B43_PHY_RFOVERVAL_EXTLNA 0x8000 -#define B43_PHY_RFOVERVAL_LNA 0x7000 -#define B43_PHY_RFOVERVAL_LNA_SHIFT 12 -#define B43_PHY_RFOVERVAL_PGA 0x0F00 -#define B43_PHY_RFOVERVAL_PGA_SHIFT 8 -#define B43_PHY_RFOVERVAL_UNK 0x0010 /* Unknown, always set. */ -#define B43_PHY_RFOVERVAL_TRSWRX 0x00E0 -#define B43_PHY_RFOVERVAL_BW 0x0003 /* Bandwidth flags */ -#define B43_PHY_RFOVERVAL_BW_LPF 0x0001 /* Low Pass Filter */ -#define B43_PHY_RFOVERVAL_BW_LBW 0x0002 /* Low Bandwidth (when set), high when unset */ -#define B43_PHY_ANALOGOVER B43_PHY_EXTG(0x14) /* Analog override */ -#define B43_PHY_ANALOGOVERVAL B43_PHY_EXTG(0x15) /* Analog override value */ - -/*** OFDM table numbers ***/ -#define B43_OFDMTAB(number, offset) (((number) << B43_PHY_OTABLENR_SHIFT) | (offset)) -#define B43_OFDMTAB_AGC1 B43_OFDMTAB(0x00, 0) -#define B43_OFDMTAB_GAIN0 B43_OFDMTAB(0x00, 0) -#define B43_OFDMTAB_GAINX B43_OFDMTAB(0x01, 0) //TODO rename -#define B43_OFDMTAB_GAIN1 B43_OFDMTAB(0x01, 4) -#define B43_OFDMTAB_AGC3 B43_OFDMTAB(0x02, 0) -#define B43_OFDMTAB_GAIN2 B43_OFDMTAB(0x02, 3) -#define B43_OFDMTAB_LNAHPFGAIN1 B43_OFDMTAB(0x03, 0) -#define B43_OFDMTAB_WRSSI B43_OFDMTAB(0x04, 0) -#define B43_OFDMTAB_LNAHPFGAIN2 B43_OFDMTAB(0x04, 0) -#define B43_OFDMTAB_NOISESCALE B43_OFDMTAB(0x05, 0) -#define B43_OFDMTAB_AGC2 B43_OFDMTAB(0x06, 0) -#define B43_OFDMTAB_ROTOR B43_OFDMTAB(0x08, 0) -#define B43_OFDMTAB_ADVRETARD B43_OFDMTAB(0x09, 0) -#define B43_OFDMTAB_DAC B43_OFDMTAB(0x0C, 0) -#define B43_OFDMTAB_DC B43_OFDMTAB(0x0E, 7) -#define B43_OFDMTAB_PWRDYN2 B43_OFDMTAB(0x0E, 12) -#define B43_OFDMTAB_LNAGAIN B43_OFDMTAB(0x0E, 13) -#define B43_OFDMTAB_UNKNOWN_0F B43_OFDMTAB(0x0F, 0) //TODO rename -#define B43_OFDMTAB_UNKNOWN_APHY B43_OFDMTAB(0x0F, 7) //TODO rename -#define B43_OFDMTAB_LPFGAIN B43_OFDMTAB(0x0F, 12) -#define B43_OFDMTAB_RSSI B43_OFDMTAB(0x10, 0) -#define B43_OFDMTAB_UNKNOWN_11 B43_OFDMTAB(0x11, 4) //TODO rename -#define B43_OFDMTAB_AGC1_R1 B43_OFDMTAB(0x13, 0) -#define B43_OFDMTAB_GAINX_R1 B43_OFDMTAB(0x14, 0) //TODO remove! -#define B43_OFDMTAB_MINSIGSQ B43_OFDMTAB(0x14, 0) -#define B43_OFDMTAB_AGC3_R1 B43_OFDMTAB(0x15, 0) -#define B43_OFDMTAB_WRSSI_R1 B43_OFDMTAB(0x15, 4) -#define B43_OFDMTAB_TSSI B43_OFDMTAB(0x15, 0) -#define B43_OFDMTAB_DACRFPABB B43_OFDMTAB(0x16, 0) -#define B43_OFDMTAB_DACOFF B43_OFDMTAB(0x17, 0) -#define B43_OFDMTAB_DCBIAS B43_OFDMTAB(0x18, 0) - -u16 b43_ofdmtab_read16(struct b43_wldev *dev, u16 table, u16 offset); -void b43_ofdmtab_write16(struct b43_wldev *dev, u16 table, - u16 offset, u16 value); -u32 b43_ofdmtab_read32(struct b43_wldev *dev, u16 table, u16 offset); -void b43_ofdmtab_write32(struct b43_wldev *dev, u16 table, - u16 offset, u32 value); - -/*** G-PHY table numbers */ -#define B43_GTAB(number, offset) (((number) << B43_PHY_GTABNR_SHIFT) | (offset)) -#define B43_GTAB_NRSSI B43_GTAB(0x00, 0) -#define B43_GTAB_TRFEMW B43_GTAB(0x0C, 0x120) -#define B43_GTAB_ORIGTR B43_GTAB(0x2E, 0x298) - -u16 b43_gtab_read(struct b43_wldev *dev, u16 table, u16 offset); //TODO implement -void b43_gtab_write(struct b43_wldev *dev, u16 table, u16 offset, u16 value); //TODO implement - -#define B43_DEFAULT_CHANNEL_A 36 -#define B43_DEFAULT_CHANNEL_BG 6 - -enum { - B43_ANTENNA0, /* Antenna 0 */ - B43_ANTENNA1, /* Antenna 0 */ - B43_ANTENNA_AUTO1, /* Automatic, starting with antenna 1 */ - B43_ANTENNA_AUTO0, /* Automatic, starting with antenna 0 */ - B43_ANTENNA2, - B43_ANTENNA3 = 8, - - B43_ANTENNA_AUTO = B43_ANTENNA_AUTO0, - B43_ANTENNA_DEFAULT = B43_ANTENNA_AUTO, -}; - -enum { - B43_INTERFMODE_NONE, - B43_INTERFMODE_NONWLAN, - B43_INTERFMODE_MANUALWLAN, - B43_INTERFMODE_AUTOWLAN, -}; - -/* Masks for the different PHY versioning registers. */ -#define B43_PHYVER_ANALOG 0xF000 -#define B43_PHYVER_ANALOG_SHIFT 12 -#define B43_PHYVER_TYPE 0x0F00 -#define B43_PHYVER_TYPE_SHIFT 8 -#define B43_PHYVER_VERSION 0x00FF - -void b43_phy_lock(struct b43_wldev *dev); -void b43_phy_unlock(struct b43_wldev *dev); - - -/* Read a value from a PHY register */ -u16 b43_phy_read(struct b43_wldev *dev, u16 offset); -/* Write a value to a PHY register */ -void b43_phy_write(struct b43_wldev *dev, u16 offset, u16 val); -/* Mask a PHY register with a mask */ -void b43_phy_mask(struct b43_wldev *dev, u16 offset, u16 mask); -/* OR a PHY register with a bitmap */ -void b43_phy_set(struct b43_wldev *dev, u16 offset, u16 set); -/* Mask and OR a PHY register with a mask and bitmap */ -void b43_phy_maskset(struct b43_wldev *dev, u16 offset, u16 mask, u16 set); - - -int b43_phy_init_tssi2dbm_table(struct b43_wldev *dev); - -void b43_phy_early_init(struct b43_wldev *dev); -int b43_phy_init(struct b43_wldev *dev); - -void b43_set_rx_antenna(struct b43_wldev *dev, int antenna); - -void b43_phy_xmitpower(struct b43_wldev *dev); - -/* Returns the boolean whether the board has HardwarePowerControl */ -bool b43_has_hardware_pctl(struct b43_phy *phy); -/* Returns the boolean whether "TX Magnification" is enabled. */ -#define has_tx_magnification(phy) \ - (((phy)->rev >= 2) && \ - ((phy)->radio_ver == 0x2050) && \ - ((phy)->radio_rev == 8)) -/* Card uses the loopback gain stuff */ -#define has_loopback_gain(phy) \ - (((phy)->rev > 1) || ((phy)->gmode)) - -/* Radio Attenuation (RF Attenuation) */ -struct b43_rfatt { - u8 att; /* Attenuation value */ - bool with_padmix; /* Flag, PAD Mixer enabled. */ -}; -struct b43_rfatt_list { - /* Attenuation values list */ - const struct b43_rfatt *list; - u8 len; - /* Minimum/Maximum attenuation values */ - u8 min_val; - u8 max_val; -}; - -/* Returns true, if the values are the same. */ -static inline bool b43_compare_rfatt(const struct b43_rfatt *a, - const struct b43_rfatt *b) -{ - return ((a->att == b->att) && - (a->with_padmix == b->with_padmix)); -} - -/* Baseband Attenuation */ -struct b43_bbatt { - u8 att; /* Attenuation value */ -}; -struct b43_bbatt_list { - /* Attenuation values list */ - const struct b43_bbatt *list; - u8 len; - /* Minimum/Maximum attenuation values */ - u8 min_val; - u8 max_val; -}; - -/* Returns true, if the values are the same. */ -static inline bool b43_compare_bbatt(const struct b43_bbatt *a, - const struct b43_bbatt *b) -{ - return (a->att == b->att); -} - -/* tx_control bits. */ -#define B43_TXCTL_PA3DB 0x40 /* PA Gain 3dB */ -#define B43_TXCTL_PA2DB 0x20 /* PA Gain 2dB */ -#define B43_TXCTL_TXMIX 0x10 /* TX Mixer Gain */ - -/* Write BasebandAttenuation value to the device. */ -void b43_phy_set_baseband_attenuation(struct b43_wldev *dev, - u16 baseband_attenuation); - -extern const u8 b43_radio_channel_codes_bg[]; - -void b43_radio_lock(struct b43_wldev *dev); -void b43_radio_unlock(struct b43_wldev *dev); - - -/* Read a value from a 16bit radio register */ -u16 b43_radio_read16(struct b43_wldev *dev, u16 offset); -/* Write a value to a 16bit radio register */ -void b43_radio_write16(struct b43_wldev *dev, u16 offset, u16 val); -/* Mask a 16bit radio register with a mask */ -void b43_radio_mask(struct b43_wldev *dev, u16 offset, u16 mask); -/* OR a 16bit radio register with a bitmap */ -void b43_radio_set(struct b43_wldev *dev, u16 offset, u16 set); -/* Mask and OR a PHY register with a mask and bitmap */ -void b43_radio_maskset(struct b43_wldev *dev, u16 offset, u16 mask, u16 set); - - -u16 b43_radio_init2050(struct b43_wldev *dev); -void b43_radio_init2060(struct b43_wldev *dev); - -void b43_radio_turn_on(struct b43_wldev *dev); -void b43_radio_turn_off(struct b43_wldev *dev, bool force); - -int b43_radio_selectchannel(struct b43_wldev *dev, u8 channel, - int synthetic_pu_workaround); - -u8 b43_radio_aci_detect(struct b43_wldev *dev, u8 channel); -u8 b43_radio_aci_scan(struct b43_wldev *dev); - -int b43_radio_set_interference_mitigation(struct b43_wldev *dev, int mode); - -void b43_calc_nrssi_slope(struct b43_wldev *dev); -void b43_calc_nrssi_threshold(struct b43_wldev *dev); -s16 b43_nrssi_hw_read(struct b43_wldev *dev, u16 offset); -void b43_nrssi_hw_write(struct b43_wldev *dev, u16 offset, s16 val); -void b43_nrssi_hw_update(struct b43_wldev *dev, u16 val); -void b43_nrssi_mem_update(struct b43_wldev *dev); - -void b43_radio_set_tx_iq(struct b43_wldev *dev); -u16 b43_radio_calibrationvalue(struct b43_wldev *dev); - -void b43_put_attenuation_into_ranges(struct b43_wldev *dev, - int *_bbatt, int *_rfatt); - -void b43_set_txpower_g(struct b43_wldev *dev, - const struct b43_bbatt *bbatt, - const struct b43_rfatt *rfatt, u8 tx_control); - -#endif /* B43_PHY_H_ */ diff --git a/drivers/net/wireless/b43/phy_a.c b/drivers/net/wireless/b43/phy_a.c new file mode 100644 index 00000000000..0f1a84c9de6 --- /dev/null +++ b/drivers/net/wireless/b43/phy_a.c @@ -0,0 +1,643 @@ +/* + + Broadcom B43 wireless driver + IEEE 802.11a PHY driver + + Copyright (c) 2005 Martin Langer <martin-langer@gmx.de>, + Copyright (c) 2005-2007 Stefano Brivio <stefano.brivio@polimi.it> + Copyright (c) 2005-2008 Michael Buesch <mb@bu3sch.de> + Copyright (c) 2005, 2006 Danny van Dyk <kugelfang@gentoo.org> + Copyright (c) 2005, 2006 Andreas Jaggi <andreas.jaggi@waterwave.ch> + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; see the file COPYING. If not, write to + the Free Software Foundation, Inc., 51 Franklin Steet, Fifth Floor, + Boston, MA 02110-1301, USA. + +*/ + +#include "b43.h" +#include "phy_a.h" +#include "phy_common.h" +#include "wa.h" +#include "tables.h" +#include "main.h" + + +/* Get the freq, as it has to be written to the device. */ +static inline u16 channel2freq_a(u8 channel) +{ + B43_WARN_ON(channel > 200); + + return (5000 + 5 * channel); +} + +static inline u16 freq_r3A_value(u16 frequency) +{ + u16 value; + + if (frequency < 5091) + value = 0x0040; + else if (frequency < 5321) + value = 0x0000; + else if (frequency < 5806) + value = 0x0080; + else + value = 0x0040; + + return value; +} + +#if 0 +/* This function converts a TSSI value to dBm in Q5.2 */ +static s8 b43_aphy_estimate_power_out(struct b43_wldev *dev, s8 tssi) +{ + struct b43_phy *phy = &dev->phy; + struct b43_phy_a *aphy = phy->a; + s8 dbm = 0; + s32 tmp; + + tmp = (aphy->tgt_idle_tssi - aphy->cur_idle_tssi + tssi); + tmp += 0x80; + tmp = clamp_val(tmp, 0x00, 0xFF); + dbm = aphy->tssi2dbm[tmp]; + //TODO: There's a FIXME on the specs + + return dbm; +} +#endif + +void b43_radio_set_tx_iq(struct b43_wldev *dev) +{ + static const u8 data_high[5] = { 0x00, 0x40, 0x80, 0x90, 0xD0 }; + static const u8 data_low[5] = { 0x00, 0x01, 0x05, 0x06, 0x0A }; + u16 tmp = b43_radio_read16(dev, 0x001E); + int i, j; + + for (i = 0; i < 5; i++) { + for (j = 0; j < 5; j++) { + if (tmp == (data_high[i] << 4 | data_low[j])) { + b43_phy_write(dev, 0x0069, + (i - j) << 8 | 0x00C0); + return; + } + } + } +} + +static void aphy_channel_switch(struct b43_wldev *dev, unsigned int channel) +{ + u16 freq, r8, tmp; + + freq = channel2freq_a(channel); + + r8 = b43_radio_read16(dev, 0x0008); + b43_write16(dev, 0x03F0, freq); + b43_radio_write16(dev, 0x0008, r8); + + //TODO: write max channel TX power? to Radio 0x2D + tmp = b43_radio_read16(dev, 0x002E); + tmp &= 0x0080; + //TODO: OR tmp with the Power out estimation for this channel? + b43_radio_write16(dev, 0x002E, tmp); + + if (freq >= 4920 && freq <= 5500) { + /* + * r8 = (((freq * 15 * 0xE1FC780F) >> 32) / 29) & 0x0F; + * = (freq * 0.025862069 + */ + r8 = 3 * freq / 116; /* is equal to r8 = freq * 0.025862 */ + } + b43_radio_write16(dev, 0x0007, (r8 << 4) | r8); + b43_radio_write16(dev, 0x0020, (r8 << 4) | r8); + b43_radio_write16(dev, 0x0021, (r8 << 4) | r8); + b43_radio_write16(dev, 0x0022, (b43_radio_read16(dev, 0x0022) + & 0x000F) | (r8 << 4)); + b43_radio_write16(dev, 0x002A, (r8 << 4)); + b43_radio_write16(dev, 0x002B, (r8 << 4)); + b43_radio_write16(dev, 0x0008, (b43_radio_read16(dev, 0x0008) + & 0x00F0) | (r8 << 4)); + b43_radio_write16(dev, 0x0029, (b43_radio_read16(dev, 0x0029) + & 0xFF0F) | 0x00B0); + b43_radio_write16(dev, 0x0035, 0x00AA); + b43_radio_write16(dev, 0x0036, 0x0085); + b43_radio_write16(dev, 0x003A, (b43_radio_read16(dev, 0x003A) + & 0xFF20) | + freq_r3A_value(freq)); + b43_radio_write16(dev, 0x003D, + b43_radio_read16(dev, 0x003D) & 0x00FF); + b43_radio_write16(dev, 0x0081, (b43_radio_read16(dev, 0x0081) + & 0xFF7F) | 0x0080); + b43_radio_write16(dev, 0x0035, + b43_radio_read16(dev, 0x0035) & 0xFFEF); + b43_radio_write16(dev, 0x0035, (b43_radio_read16(dev, 0x0035) + & 0xFFEF) | 0x0010); + b43_radio_set_tx_iq(dev); + //TODO: TSSI2dbm workaround +//FIXME b43_phy_xmitpower(dev); +} + +void b43_radio_init2060(struct b43_wldev *dev) +{ + b43_radio_write16(dev, 0x0004, 0x00C0); + b43_radio_write16(dev, 0x0005, 0x0008); + b43_radio_write16(dev, 0x0009, 0x0040); + b43_radio_write16(dev, 0x0005, 0x00AA); + b43_radio_write16(dev, 0x0032, 0x008F); + b43_radio_write16(dev, 0x0006, 0x008F); + b43_radio_write16(dev, 0x0034, 0x008F); + b43_radio_write16(dev, 0x002C, 0x0007); + b43_radio_write16(dev, 0x0082, 0x0080); + b43_radio_write16(dev, 0x0080, 0x0000); + b43_radio_write16(dev, 0x003F, 0x00DA); + b43_radio_write16(dev, 0x0005, b43_radio_read16(dev, 0x0005) & ~0x0008); + b43_radio_write16(dev, 0x0081, b43_radio_read16(dev, 0x0081) & ~0x0010); + b43_radio_write16(dev, 0x0081, b43_radio_read16(dev, 0x0081) & ~0x0020); + b43_radio_write16(dev, 0x0081, b43_radio_read16(dev, 0x0081) & ~0x0020); + msleep(1); /* delay 400usec */ + + b43_radio_write16(dev, 0x0081, + (b43_radio_read16(dev, 0x0081) & ~0x0020) | 0x0010); + msleep(1); /* delay 400usec */ + + b43_radio_write16(dev, 0x0005, + (b43_radio_read16(dev, 0x0005) & ~0x0008) | 0x0008); + b43_radio_write16(dev, 0x0085, b43_radio_read16(dev, 0x0085) & ~0x0010); + b43_radio_write16(dev, 0x0005, b43_radio_read16(dev, 0x0005) & ~0x0008); + b43_radio_write16(dev, 0x0081, b43_radio_read16(dev, 0x0081) & ~0x0040); + b43_radio_write16(dev, 0x0081, + (b43_radio_read16(dev, 0x0081) & ~0x0040) | 0x0040); + b43_radio_write16(dev, 0x0005, + (b43_radio_read16(dev, 0x0081) & ~0x0008) | 0x0008); + b43_phy_write(dev, 0x0063, 0xDDC6); + b43_phy_write(dev, 0x0069, 0x07BE); + b43_phy_write(dev, 0x006A, 0x0000); + + aphy_channel_switch(dev, dev->phy.ops->get_default_chan(dev)); + + msleep(1); +} + +static void b43_phy_rssiagc(struct b43_wldev *dev, u8 enable) +{ + int i; + + if (dev->phy.rev < 3) { + if (enable) + for (i = 0; i < B43_TAB_RSSIAGC1_SIZE; i++) { + b43_ofdmtab_write16(dev, + B43_OFDMTAB_LNAHPFGAIN1, i, 0xFFF8); + b43_ofdmtab_write16(dev, + B43_OFDMTAB_WRSSI, i, 0xFFF8); + } + else + for (i = 0; i < B43_TAB_RSSIAGC1_SIZE; i++) { + b43_ofdmtab_write16(dev, + B43_OFDMTAB_LNAHPFGAIN1, i, b43_tab_rssiagc1[i]); + b43_ofdmtab_write16(dev, + B43_OFDMTAB_WRSSI, i, b43_tab_rssiagc1[i]); + } + } else { + if (enable) + for (i = 0; i < B43_TAB_RSSIAGC1_SIZE; i++) + b43_ofdmtab_write16(dev, + B43_OFDMTAB_WRSSI, i, 0x0820); + else + for (i = 0; i < B43_TAB_RSSIAGC2_SIZE; i++) + b43_ofdmtab_write16(dev, + B43_OFDMTAB_WRSSI, i, b43_tab_rssiagc2[i]); + } +} + +static void b43_phy_ww(struct b43_wldev *dev) +{ + u16 b, curr_s, best_s = 0xFFFF; + int i; + + b43_phy_write(dev, B43_PHY_CRS0, + b43_phy_read(dev, B43_PHY_CRS0) & ~B43_PHY_CRS0_EN); + b43_phy_write(dev, B43_PHY_OFDM(0x1B), + b43_phy_read(dev, B43_PHY_OFDM(0x1B)) | 0x1000); + b43_phy_write(dev, B43_PHY_OFDM(0x82), + (b43_phy_read(dev, B43_PHY_OFDM(0x82)) & 0xF0FF) | 0x0300); + b43_radio_write16(dev, 0x0009, + b43_radio_read16(dev, 0x0009) | 0x0080); + b43_radio_write16(dev, 0x0012, + (b43_radio_read16(dev, 0x0012) & 0xFFFC) | 0x0002); + b43_wa_initgains(dev); + b43_phy_write(dev, B43_PHY_OFDM(0xBA), 0x3ED5); + b = b43_phy_read(dev, B43_PHY_PWRDOWN); + b43_phy_write(dev, B43_PHY_PWRDOWN, (b & 0xFFF8) | 0x0005); + b43_radio_write16(dev, 0x0004, + b43_radio_read16(dev, 0x0004) | 0x0004); + for (i = 0x10; i <= 0x20; i++) { + b43_radio_write16(dev, 0x0013, i); + curr_s = b43_phy_read(dev, B43_PHY_OTABLEQ) & 0x00FF; + if (!curr_s) { + best_s = 0x0000; + break; + } else if (curr_s >= 0x0080) + curr_s = 0x0100 - curr_s; + if (curr_s < best_s) + best_s = curr_s; + } + b43_phy_write(dev, B43_PHY_PWRDOWN, b); + b43_radio_write16(dev, 0x0004, + b43_radio_read16(dev, 0x0004) & 0xFFFB); + b43_radio_write16(dev, 0x0013, best_s); + b43_ofdmtab_write16(dev, B43_OFDMTAB_AGC1_R1, 0, 0xFFEC); + b43_phy_write(dev, B43_PHY_OFDM(0xB7), 0x1E80); + b43_phy_write(dev, B43_PHY_OFDM(0xB6), 0x1C00); + b43_phy_write(dev, B43_PHY_OFDM(0xB5), 0x0EC0); + b43_phy_write(dev, B43_PHY_OFDM(0xB2), 0x00C0); + b43_phy_write(dev, B43_PHY_OFDM(0xB9), 0x1FFF); + b43_phy_write(dev, B43_PHY_OFDM(0xBB), + (b43_phy_read(dev, B43_PHY_OFDM(0xBB)) & 0xF000) | 0x0053); + b43_phy_write(dev, B43_PHY_OFDM61, + (b43_phy_read(dev, B43_PHY_OFDM61) & 0xFE1F) | 0x0120); + b43_phy_write(dev, B43_PHY_OFDM(0x13), + (b43_phy_read(dev, B43_PHY_OFDM(0x13)) & 0x0FFF) | 0x3000); + b43_phy_write(dev, B43_PHY_OFDM(0x14), + (b43_phy_read(dev, B43_PHY_OFDM(0x14)) & 0x0FFF) | 0x3000); + b43_ofdmtab_write16(dev, B43_OFDMTAB_AGC1, 6, 0x0017); + for (i = 0; i < 6; i++) + b43_ofdmtab_write16(dev, B43_OFDMTAB_AGC1, i, 0x000F); + b43_ofdmtab_write16(dev, B43_OFDMTAB_AGC1, 0x0D, 0x000E); + b43_ofdmtab_write16(dev, B43_OFDMTAB_AGC1, 0x0E, 0x0011); + b43_ofdmtab_write16(dev, B43_OFDMTAB_AGC1, 0x0F, 0x0013); + b43_phy_write(dev, B43_PHY_OFDM(0x33), 0x5030); + b43_phy_write(dev, B43_PHY_CRS0, + b43_phy_read(dev, B43_PHY_CRS0) | B43_PHY_CRS0_EN); +} + +static void hardware_pctl_init_aphy(struct b43_wldev *dev) +{ + //TODO +} + +void b43_phy_inita(struct b43_wldev *dev) +{ + struct ssb_bus *bus = dev->dev->bus; + struct b43_phy *phy = &dev->phy; + + /* This lowlevel A-PHY init is also called from G-PHY init. + * So we must not access phy->a, if called from G-PHY code. + */ + B43_WARN_ON((phy->type != B43_PHYTYPE_A) && + (phy->type != B43_PHYTYPE_G)); + + might_sleep(); + + if (phy->rev >= 6) { + if (phy->type == B43_PHYTYPE_A) + b43_phy_write(dev, B43_PHY_OFDM(0x1B), + b43_phy_read(dev, B43_PHY_OFDM(0x1B)) & ~0x1000); + if (b43_phy_read(dev, B43_PHY_ENCORE) & B43_PHY_ENCORE_EN) + b43_phy_write(dev, B43_PHY_ENCORE, + b43_phy_read(dev, B43_PHY_ENCORE) | 0x0010); + else + b43_phy_write(dev, B43_PHY_ENCORE, + b43_phy_read(dev, B43_PHY_ENCORE) & ~0x1010); + } + + b43_wa_all(dev); + + if (phy->type == B43_PHYTYPE_A) { + if (phy->gmode && (phy->rev < 3)) + b43_phy_write(dev, 0x0034, + b43_phy_read(dev, 0x0034) | 0x0001); + b43_phy_rssiagc(dev, 0); + + b43_phy_write(dev, B43_PHY_CRS0, + b43_phy_read(dev, B43_PHY_CRS0) | B43_PHY_CRS0_EN); + + b43_radio_init2060(dev); + + if ((bus->boardinfo.vendor == SSB_BOARDVENDOR_BCM) && + ((bus->boardinfo.type == SSB_BOARD_BU4306) || + (bus->boardinfo.type == SSB_BOARD_BU4309))) { + ; //TODO: A PHY LO + } + + if (phy->rev >= 3) + b43_phy_ww(dev); + + hardware_pctl_init_aphy(dev); + + //TODO: radar detection + } + + if ((phy->type == B43_PHYTYPE_G) && + (dev->dev->bus->sprom.boardflags_lo & B43_BFL_PACTRL)) { + b43_phy_write(dev, B43_PHY_OFDM(0x6E), + (b43_phy_read(dev, B43_PHY_OFDM(0x6E)) + & 0xE000) | 0x3CF); + } +} + +/* Initialise the TSSI->dBm lookup table */ +static int b43_aphy_init_tssi2dbm_table(struct b43_wldev *dev) +{ + struct b43_phy *phy = &dev->phy; + struct b43_phy_a *aphy = phy->a; + s16 pab0, pab1, pab2; + + pab0 = (s16) (dev->dev->bus->sprom.pa1b0); + pab1 = (s16) (dev->dev->bus->sprom.pa1b1); + pab2 = (s16) (dev->dev->bus->sprom.pa1b2); + + if (pab0 != 0 && pab1 != 0 && pab2 != 0 && + pab0 != -1 && pab1 != -1 && pab2 != -1) { + /* The pabX values are set in SPROM. Use them. */ + if ((s8) dev->dev->bus->sprom.itssi_a != 0 && + (s8) dev->dev->bus->sprom.itssi_a != -1) + aphy->tgt_idle_tssi = + (s8) (dev->dev->bus->sprom.itssi_a); + else + aphy->tgt_idle_tssi = 62; + aphy->tssi2dbm = b43_generate_dyn_tssi2dbm_tab(dev, pab0, + pab1, pab2); + if (!aphy->tssi2dbm) + return -ENOMEM; + } else { + /* pabX values not set in SPROM, + * but APHY needs a generated table. */ + aphy->tssi2dbm = NULL; + b43err(dev->wl, "Could not generate tssi2dBm " + "table (wrong SPROM info)!\n"); + return -ENODEV; + } + + return 0; +} + +static int b43_aphy_op_allocate(struct b43_wldev *dev) +{ + struct b43_phy_a *aphy; + int err; + + aphy = kzalloc(sizeof(*aphy), GFP_KERNEL); + if (!aphy) + return -ENOMEM; + dev->phy.a = aphy; + + err = b43_aphy_init_tssi2dbm_table(dev); + if (err) + goto err_free_aphy; + + return 0; + +err_free_aphy: + kfree(aphy); + dev->phy.a = NULL; + + return err; +} + +static void b43_aphy_op_prepare_structs(struct b43_wldev *dev) +{ + struct b43_phy *phy = &dev->phy; + struct b43_phy_a *aphy = phy->a; + const void *tssi2dbm; + int tgt_idle_tssi; + + /* tssi2dbm table is constant, so it is initialized at alloc time. + * Save a copy of the pointer. */ + tssi2dbm = aphy->tssi2dbm; + tgt_idle_tssi = aphy->tgt_idle_tssi; + + /* Zero out the whole PHY structure. */ + memset(aphy, 0, sizeof(*aphy)); + + aphy->tssi2dbm = tssi2dbm; + aphy->tgt_idle_tssi = tgt_idle_tssi; + + //TODO init struct b43_phy_a + +} + +static void b43_aphy_op_free(struct b43_wldev *dev) +{ + struct b43_phy *phy = &dev->phy; + struct b43_phy_a *aphy = phy->a; + + kfree(aphy->tssi2dbm); + aphy->tssi2dbm = NULL; + + kfree(aphy); + dev->phy.a = NULL; +} + +static int b43_aphy_op_init(struct b43_wldev *dev) +{ + b43_phy_inita(dev); + + return 0; +} + +static inline u16 adjust_phyreg(struct b43_wldev *dev, u16 offset) +{ + /* OFDM registers are base-registers for the A-PHY. */ + if ((offset & B43_PHYROUTE) == B43_PHYROUTE_OFDM_GPHY) { + offset &= ~B43_PHYROUTE; + offset |= B43_PHYROUTE_BASE; + } + +#if B43_DEBUG + if ((offset & B43_PHYROUTE) == B43_PHYROUTE_EXT_GPHY) { + /* Ext-G registers are only available on G-PHYs */ + b43err(dev->wl, "Invalid EXT-G PHY access at " + "0x%04X on A-PHY\n", offset); + dump_stack(); + } + if ((offset & B43_PHYROUTE) == B43_PHYROUTE_N_BMODE) { + /* N-BMODE registers are only available on N-PHYs */ + b43err(dev->wl, "Invalid N-BMODE PHY access at " + "0x%04X on A-PHY\n", offset); + dump_stack(); + } +#endif /* B43_DEBUG */ + + return offset; +} + +static u16 b43_aphy_op_read(struct b43_wldev *dev, u16 reg) +{ + reg = adjust_phyreg(dev, reg); + b43_write16(dev, B43_MMIO_PHY_CONTROL, reg); + return b43_read16(dev, B43_MMIO_PHY_DATA); +} + +static void b43_aphy_op_write(struct b43_wldev *dev, u16 reg, u16 value) +{ + reg = adjust_phyreg(dev, reg); + b43_write16(dev, B43_MMIO_PHY_CONTROL, reg); + b43_write16(dev, B43_MMIO_PHY_DATA, value); +} + +static u16 b43_aphy_op_radio_read(struct b43_wldev *dev, u16 reg) +{ + /* Register 1 is a 32-bit register. */ + B43_WARN_ON(reg == 1); + /* A-PHY needs 0x40 for read access */ + reg |= 0x40; + + b43_write16(dev, B43_MMIO_RADIO_CONTROL, reg); + return b43_read16(dev, B43_MMIO_RADIO_DATA_LOW); +} + +static void b43_aphy_op_radio_write(struct b43_wldev *dev, u16 reg, u16 value) +{ + /* Register 1 is a 32-bit register. */ + B43_WARN_ON(reg == 1); + + b43_write16(dev, B43_MMIO_RADIO_CONTROL, reg); + b43_write16(dev, B43_MMIO_RADIO_DATA_LOW, value); +} + +static bool b43_aphy_op_supports_hwpctl(struct b43_wldev *dev) +{ + return (dev->phy.rev >= 5); +} + +static void b43_aphy_op_software_rfkill(struct b43_wldev *dev, + enum rfkill_state state) +{ + struct b43_phy *phy = &dev->phy; + + if (state == RFKILL_STATE_UNBLOCKED) { + if (phy->radio_on) + return; + b43_radio_write16(dev, 0x0004, 0x00C0); + b43_radio_write16(dev, 0x0005, 0x0008); + b43_phy_write(dev, 0x0010, b43_phy_read(dev, 0x0010) & 0xFFF7); + b43_phy_write(dev, 0x0011, b43_phy_read(dev, 0x0011) & 0xFFF7); + b43_radio_init2060(dev); + } else { + b43_radio_write16(dev, 0x0004, 0x00FF); + b43_radio_write16(dev, 0x0005, 0x00FB); + b43_phy_write(dev, 0x0010, b43_phy_read(dev, 0x0010) | 0x0008); + b43_phy_write(dev, 0x0011, b43_phy_read(dev, 0x0011) | 0x0008); + } +} + +static int b43_aphy_op_switch_channel(struct b43_wldev *dev, + unsigned int new_channel) +{ + if (new_channel > 200) + return -EINVAL; + aphy_channel_switch(dev, new_channel); + + return 0; +} + +static unsigned int b43_aphy_op_get_default_chan(struct b43_wldev *dev) +{ + return 36; /* Default to channel 36 */ +} + +static void b43_aphy_op_set_rx_antenna(struct b43_wldev *dev, int antenna) +{//TODO + struct b43_phy *phy = &dev->phy; + u64 hf; + u16 tmp; + int autodiv = 0; + + if (antenna == B43_ANTENNA_AUTO0 || antenna == B43_ANTENNA_AUTO1) + autodiv = 1; + + hf = b43_hf_read(dev); + hf &= ~B43_HF_ANTDIVHELP; + b43_hf_write(dev, hf); + + tmp = b43_phy_read(dev, B43_PHY_BBANDCFG); + tmp &= ~B43_PHY_BBANDCFG_RXANT; + tmp |= (autodiv ? B43_ANTENNA_AUTO0 : antenna) + << B43_PHY_BBANDCFG_RXANT_SHIFT; + b43_phy_write(dev, B43_PHY_BBANDCFG, tmp); + + if (autodiv) { + tmp = b43_phy_read(dev, B43_PHY_ANTDWELL); + if (antenna == B43_ANTENNA_AUTO0) + tmp &= ~B43_PHY_ANTDWELL_AUTODIV1; + else + tmp |= B43_PHY_ANTDWELL_AUTODIV1; + b43_phy_write(dev, B43_PHY_ANTDWELL, tmp); + } + if (phy->rev < 3) { + tmp = b43_phy_read(dev, B43_PHY_ANTDWELL); + tmp = (tmp & 0xFF00) | 0x24; + b43_phy_write(dev, B43_PHY_ANTDWELL, tmp); + } else { + tmp = b43_phy_read(dev, B43_PHY_OFDM61); + tmp |= 0x10; + b43_phy_write(dev, B43_PHY_OFDM61, tmp); + if (phy->analog == 3) { + b43_phy_write(dev, B43_PHY_CLIPPWRDOWNT, + 0x1D); + b43_phy_write(dev, B43_PHY_ADIVRELATED, + 8); + } else { + b43_phy_write(dev, B43_PHY_CLIPPWRDOWNT, + 0x3A); + tmp = + b43_phy_read(dev, + B43_PHY_ADIVRELATED); + tmp = (tmp & 0xFF00) | 8; + b43_phy_write(dev, B43_PHY_ADIVRELATED, + tmp); + } + } + + hf |= B43_HF_ANTDIVHELP; + b43_hf_write(dev, hf); +} + +static void b43_aphy_op_adjust_txpower(struct b43_wldev *dev) +{//TODO +} + +static enum b43_txpwr_result b43_aphy_op_recalc_txpower(struct b43_wldev *dev, + bool ignore_tssi) +{//TODO + return B43_TXPWR_RES_DONE; +} + +static void b43_aphy_op_pwork_15sec(struct b43_wldev *dev) +{//TODO +} + +static void b43_aphy_op_pwork_60sec(struct b43_wldev *dev) +{//TODO +} + +const struct b43_phy_operations b43_phyops_a = { + .allocate = b43_aphy_op_allocate, + .free = b43_aphy_op_free, + .prepare_structs = b43_aphy_op_prepare_structs, + .init = b43_aphy_op_init, + .phy_read = b43_aphy_op_read, + .phy_write = b43_aphy_op_write, + .radio_read = b43_aphy_op_radio_read, + .radio_write = b43_aphy_op_radio_write, + .supports_hwpctl = b43_aphy_op_supports_hwpctl, + .software_rfkill = b43_aphy_op_software_rfkill, + .switch_analog = b43_phyop_switch_analog_generic, + .switch_channel = b43_aphy_op_switch_channel, + .get_default_chan = b43_aphy_op_get_default_chan, + .set_rx_antenna = b43_aphy_op_set_rx_antenna, + .recalc_txpower = b43_aphy_op_recalc_txpower, + .adjust_txpower = b43_aphy_op_adjust_txpower, + .pwork_15sec = b43_aphy_op_pwork_15sec, + .pwork_60sec = b43_aphy_op_pwork_60sec, +}; diff --git a/drivers/net/wireless/b43/phy_a.h b/drivers/net/wireless/b43/phy_a.h new file mode 100644 index 00000000000..5cfaab7b16e --- /dev/null +++ b/drivers/net/wireless/b43/phy_a.h @@ -0,0 +1,130 @@ +#ifndef LINUX_B43_PHY_A_H_ +#define LINUX_B43_PHY_A_H_ + +#include "phy_common.h" + + +/* OFDM (A) PHY Registers */ +#define B43_PHY_VERSION_OFDM B43_PHY_OFDM(0x00) /* Versioning register for A-PHY */ +#define B43_PHY_BBANDCFG B43_PHY_OFDM(0x01) /* Baseband config */ +#define B43_PHY_BBANDCFG_RXANT 0x180 /* RX Antenna selection */ +#define B43_PHY_BBANDCFG_RXANT_SHIFT 7 +#define B43_PHY_PWRDOWN B43_PHY_OFDM(0x03) /* Powerdown */ +#define B43_PHY_CRSTHRES1_R1 B43_PHY_OFDM(0x06) /* CRS Threshold 1 (phy.rev 1 only) */ +#define B43_PHY_LNAHPFCTL B43_PHY_OFDM(0x1C) /* LNA/HPF control */ +#define B43_PHY_LPFGAINCTL B43_PHY_OFDM(0x20) /* LPF Gain control */ +#define B43_PHY_ADIVRELATED B43_PHY_OFDM(0x27) /* FIXME rename */ +#define B43_PHY_CRS0 B43_PHY_OFDM(0x29) +#define B43_PHY_CRS0_EN 0x4000 +#define B43_PHY_PEAK_COUNT B43_PHY_OFDM(0x30) +#define B43_PHY_ANTDWELL B43_PHY_OFDM(0x2B) /* Antenna dwell */ +#define B43_PHY_ANTDWELL_AUTODIV1 0x0100 /* Automatic RX diversity start antenna */ +#define B43_PHY_ENCORE B43_PHY_OFDM(0x49) /* "Encore" (RangeMax / BroadRange) */ +#define B43_PHY_ENCORE_EN 0x0200 /* Encore enable */ +#define B43_PHY_LMS B43_PHY_OFDM(0x55) +#define B43_PHY_OFDM61 B43_PHY_OFDM(0x61) /* FIXME rename */ +#define B43_PHY_OFDM61_10 0x0010 /* FIXME rename */ +#define B43_PHY_IQBAL B43_PHY_OFDM(0x69) /* I/Q balance */ +#define B43_PHY_BBTXDC_BIAS B43_PHY_OFDM(0x6B) /* Baseband TX DC bias */ +#define B43_PHY_OTABLECTL B43_PHY_OFDM(0x72) /* OFDM table control (see below) */ +#define B43_PHY_OTABLEOFF 0x03FF /* OFDM table offset (see below) */ +#define B43_PHY_OTABLENR 0xFC00 /* OFDM table number (see below) */ +#define B43_PHY_OTABLENR_SHIFT 10 +#define B43_PHY_OTABLEI B43_PHY_OFDM(0x73) /* OFDM table data I */ +#define B43_PHY_OTABLEQ B43_PHY_OFDM(0x74) /* OFDM table data Q */ +#define B43_PHY_HPWR_TSSICTL B43_PHY_OFDM(0x78) /* Hardware power TSSI control */ +#define B43_PHY_ADCCTL B43_PHY_OFDM(0x7A) /* ADC control */ +#define B43_PHY_IDLE_TSSI B43_PHY_OFDM(0x7B) +#define B43_PHY_A_TEMP_SENSE B43_PHY_OFDM(0x7C) /* A PHY temperature sense */ +#define B43_PHY_NRSSITHRES B43_PHY_OFDM(0x8A) /* NRSSI threshold */ +#define B43_PHY_ANTWRSETT B43_PHY_OFDM(0x8C) /* Antenna WR settle */ +#define B43_PHY_ANTWRSETT_ARXDIV 0x2000 /* Automatic RX diversity enabled */ +#define B43_PHY_CLIPPWRDOWNT B43_PHY_OFDM(0x93) /* Clip powerdown threshold */ +#define B43_PHY_OFDM9B B43_PHY_OFDM(0x9B) /* FIXME rename */ +#define B43_PHY_N1P1GAIN B43_PHY_OFDM(0xA0) +#define B43_PHY_P1P2GAIN B43_PHY_OFDM(0xA1) +#define B43_PHY_N1N2GAIN B43_PHY_OFDM(0xA2) +#define B43_PHY_CLIPTHRES B43_PHY_OFDM(0xA3) +#define B43_PHY_CLIPN1P2THRES B43_PHY_OFDM(0xA4) +#define B43_PHY_CCKSHIFTBITS_WA B43_PHY_OFDM(0xA5) /* CCK shiftbits workaround, FIXME rename */ +#define B43_PHY_CCKSHIFTBITS B43_PHY_OFDM(0xA7) /* FIXME rename */ +#define B43_PHY_DIVSRCHIDX B43_PHY_OFDM(0xA8) /* Divider search gain/index */ +#define B43_PHY_CLIPP2THRES B43_PHY_OFDM(0xA9) +#define B43_PHY_CLIPP3THRES B43_PHY_OFDM(0xAA) +#define B43_PHY_DIVP1P2GAIN B43_PHY_OFDM(0xAB) +#define B43_PHY_DIVSRCHGAINBACK B43_PHY_OFDM(0xAD) /* Divider search gain back */ +#define B43_PHY_DIVSRCHGAINCHNG B43_PHY_OFDM(0xAE) /* Divider search gain change */ +#define B43_PHY_CRSTHRES1 B43_PHY_OFDM(0xC0) /* CRS Threshold 1 (phy.rev >= 2 only) */ +#define B43_PHY_CRSTHRES2 B43_PHY_OFDM(0xC1) /* CRS Threshold 2 (phy.rev >= 2 only) */ +#define B43_PHY_TSSIP_LTBASE B43_PHY_OFDM(0x380) /* TSSI power lookup table base */ +#define B43_PHY_DC_LTBASE B43_PHY_OFDM(0x3A0) /* DC lookup table base */ +#define B43_PHY_GAIN_LTBASE B43_PHY_OFDM(0x3C0) /* Gain lookup table base */ + +/*** OFDM table numbers ***/ +#define B43_OFDMTAB(number, offset) (((number) << B43_PHY_OTABLENR_SHIFT) | (offset)) +#define B43_OFDMTAB_AGC1 B43_OFDMTAB(0x00, 0) +#define B43_OFDMTAB_GAIN0 B43_OFDMTAB(0x00, 0) +#define B43_OFDMTAB_GAINX B43_OFDMTAB(0x01, 0) //TODO rename +#define B43_OFDMTAB_GAIN1 B43_OFDMTAB(0x01, 4) +#define B43_OFDMTAB_AGC3 B43_OFDMTAB(0x02, 0) +#define B43_OFDMTAB_GAIN2 B43_OFDMTAB(0x02, 3) +#define B43_OFDMTAB_LNAHPFGAIN1 B43_OFDMTAB(0x03, 0) +#define B43_OFDMTAB_WRSSI B43_OFDMTAB(0x04, 0) +#define B43_OFDMTAB_LNAHPFGAIN2 B43_OFDMTAB(0x04, 0) +#define B43_OFDMTAB_NOISESCALE B43_OFDMTAB(0x05, 0) +#define B43_OFDMTAB_AGC2 B43_OFDMTAB(0x06, 0) +#define B43_OFDMTAB_ROTOR B43_OFDMTAB(0x08, 0) +#define B43_OFDMTAB_ADVRETARD B43_OFDMTAB(0x09, 0) +#define B43_OFDMTAB_DAC B43_OFDMTAB(0x0C, 0) +#define B43_OFDMTAB_DC B43_OFDMTAB(0x0E, 7) +#define B43_OFDMTAB_PWRDYN2 B43_OFDMTAB(0x0E, 12) +#define B43_OFDMTAB_LNAGAIN B43_OFDMTAB(0x0E, 13) +#define B43_OFDMTAB_UNKNOWN_0F B43_OFDMTAB(0x0F, 0) //TODO rename +#define B43_OFDMTAB_UNKNOWN_APHY B43_OFDMTAB(0x0F, 7) //TODO rename +#define B43_OFDMTAB_LPFGAIN B43_OFDMTAB(0x0F, 12) +#define B43_OFDMTAB_RSSI B43_OFDMTAB(0x10, 0) +#define B43_OFDMTAB_UNKNOWN_11 B43_OFDMTAB(0x11, 4) //TODO rename +#define B43_OFDMTAB_AGC1_R1 B43_OFDMTAB(0x13, 0) +#define B43_OFDMTAB_GAINX_R1 B43_OFDMTAB(0x14, 0) //TODO remove! +#define B43_OFDMTAB_MINSIGSQ B43_OFDMTAB(0x14, 0) +#define B43_OFDMTAB_AGC3_R1 B43_OFDMTAB(0x15, 0) +#define B43_OFDMTAB_WRSSI_R1 B43_OFDMTAB(0x15, 4) +#define B43_OFDMTAB_TSSI B43_OFDMTAB(0x15, 0) +#define B43_OFDMTAB_DACRFPABB B43_OFDMTAB(0x16, 0) +#define B43_OFDMTAB_DACOFF B43_OFDMTAB(0x17, 0) +#define B43_OFDMTAB_DCBIAS B43_OFDMTAB(0x18, 0) + +u16 b43_ofdmtab_read16(struct b43_wldev *dev, u16 table, u16 offset); +void b43_ofdmtab_write16(struct b43_wldev *dev, u16 table, + u16 offset, u16 value); +u32 b43_ofdmtab_read32(struct b43_wldev *dev, u16 table, u16 offset); +void b43_ofdmtab_write32(struct b43_wldev *dev, u16 table, + u16 offset, u32 value); + + +struct b43_phy_a { + /* Pointer to the table used to convert a + * TSSI value to dBm-Q5.2 */ + const s8 *tssi2dbm; + /* Target idle TSSI */ + int tgt_idle_tssi; + /* Current idle TSSI */ + int cur_idle_tssi;//FIXME value currently not set + + /* A-PHY TX Power control value. */ + u16 txpwr_offset; + + //TODO lots of missing stuff +}; + +/** + * b43_phy_inita - Lowlevel A-PHY init routine. + * This is _only_ used by the G-PHY code. + */ +void b43_phy_inita(struct b43_wldev *dev); + + +struct b43_phy_operations; +extern const struct b43_phy_operations b43_phyops_a; + +#endif /* LINUX_B43_PHY_A_H_ */ diff --git a/drivers/net/wireless/b43/phy_common.c b/drivers/net/wireless/b43/phy_common.c new file mode 100644 index 00000000000..4d4345d76ab --- /dev/null +++ b/drivers/net/wireless/b43/phy_common.c @@ -0,0 +1,381 @@ +/* + + Broadcom B43 wireless driver + Common PHY routines + + Copyright (c) 2005 Martin Langer <martin-langer@gmx.de>, + Copyright (c) 2005-2007 Stefano Brivio <stefano.brivio@polimi.it> + Copyright (c) 2005-2008 Michael Buesch <mb@bu3sch.de> + Copyright (c) 2005, 2006 Danny van Dyk <kugelfang@gentoo.org> + Copyright (c) 2005, 2006 Andreas Jaggi <andreas.jaggi@waterwave.ch> + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; see the file COPYING. If not, write to + the Free Software Foundation, Inc., 51 Franklin Steet, Fifth Floor, + Boston, MA 02110-1301, USA. + +*/ + +#include "phy_common.h" +#include "phy_g.h" +#include "phy_a.h" +#include "phy_n.h" +#include "phy_lp.h" +#include "b43.h" +#include "main.h" + + +int b43_phy_allocate(struct b43_wldev *dev) +{ + struct b43_phy *phy = &(dev->phy); + int err; + + phy->ops = NULL; + + switch (phy->type) { + case B43_PHYTYPE_A: + phy->ops = &b43_phyops_a; + break; + case B43_PHYTYPE_G: + phy->ops = &b43_phyops_g; + break; + case B43_PHYTYPE_N: +#ifdef CONFIG_B43_NPHY + phy->ops = &b43_phyops_n; +#endif + break; + case B43_PHYTYPE_LP: +#ifdef CONFIG_B43_PHY_LP + phy->ops = &b43_phyops_lp; +#endif + break; + } + if (B43_WARN_ON(!phy->ops)) + return -ENODEV; + + err = phy->ops->allocate(dev); + if (err) + phy->ops = NULL; + + return err; +} + +void b43_phy_free(struct b43_wldev *dev) +{ + dev->phy.ops->free(dev); + dev->phy.ops = NULL; +} + +int b43_phy_init(struct b43_wldev *dev) +{ + struct b43_phy *phy = &dev->phy; + const struct b43_phy_operations *ops = phy->ops; + int err; + + phy->channel = ops->get_default_chan(dev); + + ops->software_rfkill(dev, RFKILL_STATE_UNBLOCKED); + err = ops->init(dev); + if (err) { + b43err(dev->wl, "PHY init failed\n"); + goto err_block_rf; + } + /* Make sure to switch hardware and firmware (SHM) to + * the default channel. */ + err = b43_switch_channel(dev, ops->get_default_chan(dev)); + if (err) { + b43err(dev->wl, "PHY init: Channel switch to default failed\n"); + goto err_phy_exit; + } + + return 0; + +err_phy_exit: + if (ops->exit) + ops->exit(dev); +err_block_rf: + ops->software_rfkill(dev, RFKILL_STATE_SOFT_BLOCKED); + + return err; +} + +void b43_phy_exit(struct b43_wldev *dev) +{ + const struct b43_phy_operations *ops = dev->phy.ops; + + ops->software_rfkill(dev, RFKILL_STATE_SOFT_BLOCKED); + if (ops->exit) + ops->exit(dev); +} + +bool b43_has_hardware_pctl(struct b43_wldev *dev) +{ + if (!dev->phy.hardware_power_control) + return 0; + if (!dev->phy.ops->supports_hwpctl) + return 0; + return dev->phy.ops->supports_hwpctl(dev); +} + +void b43_radio_lock(struct b43_wldev *dev) +{ + u32 macctl; + + macctl = b43_read32(dev, B43_MMIO_MACCTL); + B43_WARN_ON(macctl & B43_MACCTL_RADIOLOCK); + macctl |= B43_MACCTL_RADIOLOCK; + b43_write32(dev, B43_MMIO_MACCTL, macctl); + /* Commit the write and wait for the device + * to exit any radio register access. */ + b43_read32(dev, B43_MMIO_MACCTL); + udelay(10); +} + +void b43_radio_unlock(struct b43_wldev *dev) +{ + u32 macctl; + + /* Commit any write */ + b43_read16(dev, B43_MMIO_PHY_VER); + /* unlock */ + macctl = b43_read32(dev, B43_MMIO_MACCTL); + B43_WARN_ON(!(macctl & B43_MACCTL_RADIOLOCK)); + macctl &= ~B43_MACCTL_RADIOLOCK; + b43_write32(dev, B43_MMIO_MACCTL, macctl); +} + +void b43_phy_lock(struct b43_wldev *dev) +{ +#if B43_DEBUG + B43_WARN_ON(dev->phy.phy_locked); + dev->phy.phy_locked = 1; +#endif + B43_WARN_ON(dev->dev->id.revision < 3); + + if (!b43_is_mode(dev->wl, IEEE80211_IF_TYPE_AP)) + b43_power_saving_ctl_bits(dev, B43_PS_AWAKE); +} + +void b43_phy_unlock(struct b43_wldev *dev) +{ +#if B43_DEBUG + B43_WARN_ON(!dev->phy.phy_locked); + dev->phy.phy_locked = 0; +#endif + B43_WARN_ON(dev->dev->id.revision < 3); + + if (!b43_is_mode(dev->wl, IEEE80211_IF_TYPE_AP)) + b43_power_saving_ctl_bits(dev, 0); +} + +u16 b43_radio_read(struct b43_wldev *dev, u16 reg) +{ + return dev->phy.ops->radio_read(dev, reg); +} + +void b43_radio_write(struct b43_wldev *dev, u16 reg, u16 value) +{ + dev->phy.ops->radio_write(dev, reg, value); +} + +void b43_radio_mask(struct b43_wldev *dev, u16 offset, u16 mask) +{ + b43_radio_write16(dev, offset, + b43_radio_read16(dev, offset) & mask); +} + +void b43_radio_set(struct b43_wldev *dev, u16 offset, u16 set) +{ + b43_radio_write16(dev, offset, + b43_radio_read16(dev, offset) | set); +} + +void b43_radio_maskset(struct b43_wldev *dev, u16 offset, u16 mask, u16 set) +{ + b43_radio_write16(dev, offset, + (b43_radio_read16(dev, offset) & mask) | set); +} + +u16 b43_phy_read(struct b43_wldev *dev, u16 reg) +{ + return dev->phy.ops->phy_read(dev, reg); +} + +void b43_phy_write(struct b43_wldev *dev, u16 reg, u16 value) +{ + dev->phy.ops->phy_write(dev, reg, value); +} + +void b43_phy_mask(struct b43_wldev *dev, u16 offset, u16 mask) +{ + b43_phy_write(dev, offset, + b43_phy_read(dev, offset) & mask); +} + +void b43_phy_set(struct b43_wldev *dev, u16 offset, u16 set) +{ + b43_phy_write(dev, offset, + b43_phy_read(dev, offset) | set); +} + +void b43_phy_maskset(struct b43_wldev *dev, u16 offset, u16 mask, u16 set) +{ + b43_phy_write(dev, offset, + (b43_phy_read(dev, offset) & mask) | set); +} + +int b43_switch_channel(struct b43_wldev *dev, unsigned int new_channel) +{ + struct b43_phy *phy = &(dev->phy); + u16 channelcookie, savedcookie; + int err; + + if (new_channel == B43_DEFAULT_CHANNEL) + new_channel = phy->ops->get_default_chan(dev); + + /* First we set the channel radio code to prevent the + * firmware from sending ghost packets. + */ + channelcookie = new_channel; + if (b43_current_band(dev->wl) == IEEE80211_BAND_5GHZ) + channelcookie |= 0x100; + //FIXME set 40Mhz flag if required + savedcookie = b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_CHAN); + b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_CHAN, channelcookie); + + /* Now try to switch the PHY hardware channel. */ + err = phy->ops->switch_channel(dev, new_channel); + if (err) + goto err_restore_cookie; + + dev->phy.channel = new_channel; + /* Wait for the radio to tune to the channel and stabilize. */ + msleep(8); + + return 0; + +err_restore_cookie: + b43_shm_write16(dev, B43_SHM_SHARED, + B43_SHM_SH_CHAN, savedcookie); + + return err; +} + +void b43_software_rfkill(struct b43_wldev *dev, enum rfkill_state state) +{ + struct b43_phy *phy = &dev->phy; + + if (state == RFKILL_STATE_HARD_BLOCKED) { + /* We cannot hardware-block the device */ + state = RFKILL_STATE_SOFT_BLOCKED; + } + + phy->ops->software_rfkill(dev, state); + phy->radio_on = (state == RFKILL_STATE_UNBLOCKED); +} + +/** + * b43_phy_txpower_adjust_work - TX power workqueue. + * + * Workqueue for updating the TX power parameters in hardware. + */ +void b43_phy_txpower_adjust_work(struct work_struct *work) +{ + struct b43_wl *wl = container_of(work, struct b43_wl, + txpower_adjust_work); + struct b43_wldev *dev; + + mutex_lock(&wl->mutex); + dev = wl->current_dev; + + if (likely(dev && (b43_status(dev) >= B43_STAT_STARTED))) + dev->phy.ops->adjust_txpower(dev); + + mutex_unlock(&wl->mutex); +} + +/* Called with wl->irq_lock locked */ +void b43_phy_txpower_check(struct b43_wldev *dev, unsigned int flags) +{ + struct b43_phy *phy = &dev->phy; + unsigned long now = jiffies; + enum b43_txpwr_result result; + + if (!(flags & B43_TXPWR_IGNORE_TIME)) { + /* Check if it's time for a TXpower check. */ + if (time_before(now, phy->next_txpwr_check_time)) + return; /* Not yet */ + } + /* The next check will be needed in two seconds, or later. */ + phy->next_txpwr_check_time = round_jiffies(now + (HZ * 2)); + + if ((dev->dev->bus->boardinfo.vendor == SSB_BOARDVENDOR_BCM) && + (dev->dev->bus->boardinfo.type == SSB_BOARD_BU4306)) + return; /* No software txpower adjustment needed */ + + result = phy->ops->recalc_txpower(dev, !!(flags & B43_TXPWR_IGNORE_TSSI)); + if (result == B43_TXPWR_RES_DONE) + return; /* We are done. */ + B43_WARN_ON(result != B43_TXPWR_RES_NEED_ADJUST); + B43_WARN_ON(phy->ops->adjust_txpower == NULL); + + /* We must adjust the transmission power in hardware. + * Schedule b43_phy_txpower_adjust_work(). */ + queue_work(dev->wl->hw->workqueue, &dev->wl->txpower_adjust_work); +} + +int b43_phy_shm_tssi_read(struct b43_wldev *dev, u16 shm_offset) +{ + const bool is_ofdm = (shm_offset != B43_SHM_SH_TSSI_CCK); + unsigned int a, b, c, d; + unsigned int average; + u32 tmp; + + tmp = b43_shm_read32(dev, B43_SHM_SHARED, shm_offset); + a = tmp & 0xFF; + b = (tmp >> 8) & 0xFF; + c = (tmp >> 16) & 0xFF; + d = (tmp >> 24) & 0xFF; + if (a == 0 || a == B43_TSSI_MAX || + b == 0 || b == B43_TSSI_MAX || + c == 0 || c == B43_TSSI_MAX || + d == 0 || d == B43_TSSI_MAX) + return -ENOENT; + /* The values are OK. Clear them. */ + tmp = B43_TSSI_MAX | (B43_TSSI_MAX << 8) | + (B43_TSSI_MAX << 16) | (B43_TSSI_MAX << 24); + b43_shm_write32(dev, B43_SHM_SHARED, shm_offset, tmp); + + if (is_ofdm) { + a = (a + 32) & 0x3F; + b = (b + 32) & 0x3F; + c = (c + 32) & 0x3F; + d = (d + 32) & 0x3F; + } + + /* Get the average of the values with 0.5 added to each value. */ + average = (a + b + c + d + 2) / 4; + if (is_ofdm) { + /* Adjust for CCK-boost */ + if (b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_HOSTFLO) + & B43_HF_CCKBOOST) + average = (average >= 13) ? (average - 13) : 0; + } + + return average; +} + +void b43_phyop_switch_analog_generic(struct b43_wldev *dev, bool on) +{ + b43_write16(dev, B43_MMIO_PHY0, on ? 0 : 0xF4); +} diff --git a/drivers/net/wireless/b43/phy_common.h b/drivers/net/wireless/b43/phy_common.h new file mode 100644 index 00000000000..c9f5430d1d7 --- /dev/null +++ b/drivers/net/wireless/b43/phy_common.h @@ -0,0 +1,413 @@ +#ifndef LINUX_B43_PHY_COMMON_H_ +#define LINUX_B43_PHY_COMMON_H_ + +#include <linux/rfkill.h> + +struct b43_wldev; + + +/* PHY register routing bits */ +#define B43_PHYROUTE 0x0C00 /* PHY register routing bits mask */ +#define B43_PHYROUTE_BASE 0x0000 /* Base registers */ +#define B43_PHYROUTE_OFDM_GPHY 0x0400 /* OFDM register routing for G-PHYs */ +#define B43_PHYROUTE_EXT_GPHY 0x0800 /* Extended G-PHY registers */ +#define B43_PHYROUTE_N_BMODE 0x0C00 /* N-PHY BMODE registers */ + +/* CCK (B-PHY) registers. */ +#define B43_PHY_CCK(reg) ((reg) | B43_PHYROUTE_BASE) +/* N-PHY registers. */ +#define B43_PHY_N(reg) ((reg) | B43_PHYROUTE_BASE) +/* N-PHY BMODE registers. */ +#define B43_PHY_N_BMODE(reg) ((reg) | B43_PHYROUTE_N_BMODE) +/* OFDM (A-PHY) registers. */ +#define B43_PHY_OFDM(reg) ((reg) | B43_PHYROUTE_OFDM_GPHY) +/* Extended G-PHY registers. */ +#define B43_PHY_EXTG(reg) ((reg) | B43_PHYROUTE_EXT_GPHY) + + +/* Masks for the PHY versioning registers. */ +#define B43_PHYVER_ANALOG 0xF000 +#define B43_PHYVER_ANALOG_SHIFT 12 +#define B43_PHYVER_TYPE 0x0F00 +#define B43_PHYVER_TYPE_SHIFT 8 +#define B43_PHYVER_VERSION 0x00FF + +/** + * enum b43_interference_mitigation - Interference Mitigation mode + * + * @B43_INTERFMODE_NONE: Disabled + * @B43_INTERFMODE_NONWLAN: Non-WLAN Interference Mitigation + * @B43_INTERFMODE_MANUALWLAN: WLAN Interference Mitigation + * @B43_INTERFMODE_AUTOWLAN: Automatic WLAN Interference Mitigation + */ +enum b43_interference_mitigation { + B43_INTERFMODE_NONE, + B43_INTERFMODE_NONWLAN, + B43_INTERFMODE_MANUALWLAN, + B43_INTERFMODE_AUTOWLAN, +}; + +/* Antenna identifiers */ +enum { + B43_ANTENNA0, /* Antenna 0 */ + B43_ANTENNA1, /* Antenna 0 */ + B43_ANTENNA_AUTO1, /* Automatic, starting with antenna 1 */ + B43_ANTENNA_AUTO0, /* Automatic, starting with antenna 0 */ + B43_ANTENNA2, + B43_ANTENNA3 = 8, + + B43_ANTENNA_AUTO = B43_ANTENNA_AUTO0, + B43_ANTENNA_DEFAULT = B43_ANTENNA_AUTO, +}; + +/** + * enum b43_txpwr_result - Return value for the recalc_txpower PHY op. + * + * @B43_TXPWR_RES_NEED_ADJUST: Values changed. Hardware adjustment is needed. + * @B43_TXPWR_RES_DONE: No more work to do. Everything is done. + */ +enum b43_txpwr_result { + B43_TXPWR_RES_NEED_ADJUST, + B43_TXPWR_RES_DONE, +}; + +/** + * struct b43_phy_operations - Function pointers for PHY ops. + * + * @allocate: Allocate and initialise the PHY data structures. + * Must not be NULL. + * @free: Destroy and free the PHY data structures. + * Must not be NULL. + * + * @prepare_structs: Prepare the PHY data structures. + * The data structures allocated in @allocate are + * initialized here. + * Must not be NULL. + * @prepare_hardware: Prepare the PHY. This is called before b43_chip_init to + * do some early early PHY hardware init. + * Can be NULL, if not required. + * @init: Initialize the PHY. + * Must not be NULL. + * @exit: Shutdown the PHY. + * Can be NULL, if not required. + * + * @phy_read: Read from a PHY register. + * Must not be NULL. + * @phy_write: Write to a PHY register. + * Must not be NULL. + * @radio_read: Read from a Radio register. + * Must not be NULL. + * @radio_write: Write to a Radio register. + * Must not be NULL. + * + * @supports_hwpctl: Returns a boolean whether Hardware Power Control + * is supported or not. + * If NULL, hwpctl is assumed to be never supported. + * @software_rfkill: Turn the radio ON or OFF. + * Possible state values are + * RFKILL_STATE_SOFT_BLOCKED or + * RFKILL_STATE_UNBLOCKED + * Must not be NULL. + * @switch_analog: Turn the Analog on/off. + * Must not be NULL. + * @switch_channel: Switch the radio to another channel. + * Must not be NULL. + * @get_default_chan: Just returns the default channel number. + * Must not be NULL. + * @set_rx_antenna: Set the antenna used for RX. + * Can be NULL, if not supported. + * @interf_mitigation: Switch the Interference Mitigation mode. + * Can be NULL, if not supported. + * + * @recalc_txpower: Recalculate the transmission power parameters. + * This callback has to recalculate the TX power settings, + * but does not need to write them to the hardware, yet. + * Returns enum b43_txpwr_result to indicate whether the hardware + * needs to be adjusted. + * If B43_TXPWR_NEED_ADJUST is returned, @adjust_txpower + * will be called later. + * If the parameter "ignore_tssi" is true, the TSSI values should + * be ignored and a recalculation of the power settings should be + * done even if the TSSI values did not change. + * This callback is called with wl->irq_lock held and must not sleep. + * Must not be NULL. + * @adjust_txpower: Write the previously calculated TX power settings + * (from @recalc_txpower) to the hardware. + * This function may sleep. + * Can be NULL, if (and ONLY if) @recalc_txpower _always_ + * returns B43_TXPWR_RES_DONE. + * + * @pwork_15sec: Periodic work. Called every 15 seconds. + * Can be NULL, if not required. + * @pwork_60sec: Periodic work. Called every 60 seconds. + * Can be NULL, if not required. + */ +struct b43_phy_operations { + /* Initialisation */ + int (*allocate)(struct b43_wldev *dev); + void (*free)(struct b43_wldev *dev); + void (*prepare_structs)(struct b43_wldev *dev); + int (*prepare_hardware)(struct b43_wldev *dev); + int (*init)(struct b43_wldev *dev); + void (*exit)(struct b43_wldev *dev); + + /* Register access */ + u16 (*phy_read)(struct b43_wldev *dev, u16 reg); + void (*phy_write)(struct b43_wldev *dev, u16 reg, u16 value); + u16 (*radio_read)(struct b43_wldev *dev, u16 reg); + void (*radio_write)(struct b43_wldev *dev, u16 reg, u16 value); + + /* Radio */ + bool (*supports_hwpctl)(struct b43_wldev *dev); + void (*software_rfkill)(struct b43_wldev *dev, enum rfkill_state state); + void (*switch_analog)(struct b43_wldev *dev, bool on); + int (*switch_channel)(struct b43_wldev *dev, unsigned int new_channel); + unsigned int (*get_default_chan)(struct b43_wldev *dev); + void (*set_rx_antenna)(struct b43_wldev *dev, int antenna); + int (*interf_mitigation)(struct b43_wldev *dev, + enum b43_interference_mitigation new_mode); + + /* Transmission power adjustment */ + enum b43_txpwr_result (*recalc_txpower)(struct b43_wldev *dev, + bool ignore_tssi); + void (*adjust_txpower)(struct b43_wldev *dev); + + /* Misc */ + void (*pwork_15sec)(struct b43_wldev *dev); + void (*pwork_60sec)(struct b43_wldev *dev); +}; + +struct b43_phy_a; +struct b43_phy_g; +struct b43_phy_n; +struct b43_phy_lp; + +struct b43_phy { + /* Hardware operation callbacks. */ + const struct b43_phy_operations *ops; + + /* Most hardware context information is stored in the standard- + * specific data structures pointed to by the pointers below. + * Only one of them is valid (the currently enabled PHY). */ +#ifdef CONFIG_B43_DEBUG + /* No union for debug build to force NULL derefs in buggy code. */ + struct { +#else + union { +#endif + /* A-PHY specific information */ + struct b43_phy_a *a; + /* G-PHY specific information */ + struct b43_phy_g *g; + /* N-PHY specific information */ + struct b43_phy_n *n; + /* LP-PHY specific information */ + struct b43_phy_lp *lp; + }; + + /* Band support flags. */ + bool supports_2ghz; + bool supports_5ghz; + + /* GMODE bit enabled? */ + bool gmode; + + /* Analog Type */ + u8 analog; + /* B43_PHYTYPE_ */ + u8 type; + /* PHY revision number. */ + u8 rev; + + /* Radio versioning */ + u16 radio_manuf; /* Radio manufacturer */ + u16 radio_ver; /* Radio version */ + u8 radio_rev; /* Radio revision */ + + /* Software state of the radio */ + bool radio_on; + + /* Desired TX power level (in dBm). + * This is set by the user and adjusted in b43_phy_xmitpower(). */ + int desired_txpower; + + /* Hardware Power Control enabled? */ + bool hardware_power_control; + + /* The time (in absolute jiffies) when the next TX power output + * check is needed. */ + unsigned long next_txpwr_check_time; + + /* current channel */ + unsigned int channel; + + /* PHY TX errors counter. */ + atomic_t txerr_cnt; + +#ifdef CONFIG_B43_DEBUG + /* PHY registers locked by b43_phy_lock()? */ + bool phy_locked; +#endif /* B43_DEBUG */ +}; + + +/** + * b43_phy_allocate - Allocate PHY structs + * Allocate the PHY data structures, based on the current dev->phy.type + */ +int b43_phy_allocate(struct b43_wldev *dev); + +/** + * b43_phy_free - Free PHY structs + */ +void b43_phy_free(struct b43_wldev *dev); + +/** + * b43_phy_init - Initialise the PHY + */ +int b43_phy_init(struct b43_wldev *dev); + +/** + * b43_phy_exit - Cleanup PHY + */ +void b43_phy_exit(struct b43_wldev *dev); + +/** + * b43_has_hardware_pctl - Hardware Power Control supported? + * Returns a boolean, whether hardware power control is supported. + */ +bool b43_has_hardware_pctl(struct b43_wldev *dev); + +/** + * b43_phy_read - 16bit PHY register read access + */ +u16 b43_phy_read(struct b43_wldev *dev, u16 reg); + +/** + * b43_phy_write - 16bit PHY register write access + */ +void b43_phy_write(struct b43_wldev *dev, u16 reg, u16 value); + +/** + * b43_phy_mask - Mask a PHY register with a mask + */ +void b43_phy_mask(struct b43_wldev *dev, u16 offset, u16 mask); + +/** + * b43_phy_set - OR a PHY register with a bitmap + */ +void b43_phy_set(struct b43_wldev *dev, u16 offset, u16 set); + +/** + * b43_phy_maskset - Mask and OR a PHY register with a mask and bitmap + */ +void b43_phy_maskset(struct b43_wldev *dev, u16 offset, u16 mask, u16 set); + +/** + * b43_radio_read - 16bit Radio register read access + */ +u16 b43_radio_read(struct b43_wldev *dev, u16 reg); +#define b43_radio_read16 b43_radio_read /* DEPRECATED */ + +/** + * b43_radio_write - 16bit Radio register write access + */ +void b43_radio_write(struct b43_wldev *dev, u16 reg, u16 value); +#define b43_radio_write16 b43_radio_write /* DEPRECATED */ + +/** + * b43_radio_mask - Mask a 16bit radio register with a mask + */ +void b43_radio_mask(struct b43_wldev *dev, u16 offset, u16 mask); + +/** + * b43_radio_set - OR a 16bit radio register with a bitmap + */ +void b43_radio_set(struct b43_wldev *dev, u16 offset, u16 set); + +/** + * b43_radio_maskset - Mask and OR a radio register with a mask and bitmap + */ +void b43_radio_maskset(struct b43_wldev *dev, u16 offset, u16 mask, u16 set); + +/** + * b43_radio_lock - Lock firmware radio register access + */ +void b43_radio_lock(struct b43_wldev *dev); + +/** + * b43_radio_unlock - Unlock firmware radio register access + */ +void b43_radio_unlock(struct b43_wldev *dev); + +/** + * b43_phy_lock - Lock firmware PHY register access + */ +void b43_phy_lock(struct b43_wldev *dev); + +/** + * b43_phy_unlock - Unlock firmware PHY register access + */ +void b43_phy_unlock(struct b43_wldev *dev); + +/** + * b43_switch_channel - Switch to another channel + */ +int b43_switch_channel(struct b43_wldev *dev, unsigned int new_channel); +/** + * B43_DEFAULT_CHANNEL - Switch to the default channel. + */ +#define B43_DEFAULT_CHANNEL UINT_MAX + +/** + * b43_software_rfkill - Turn the radio ON or OFF in software. + */ +void b43_software_rfkill(struct b43_wldev *dev, enum rfkill_state state); + +/** + * b43_phy_txpower_check - Check TX power output. + * + * Compare the current TX power output to the desired power emission + * and schedule an adjustment in case it mismatches. + * Requires wl->irq_lock locked. + * + * @flags: OR'ed enum b43_phy_txpower_check_flags flags. + * See the docs below. + */ +void b43_phy_txpower_check(struct b43_wldev *dev, unsigned int flags); +/** + * enum b43_phy_txpower_check_flags - Flags for b43_phy_txpower_check() + * + * @B43_TXPWR_IGNORE_TIME: Ignore the schedule time and force-redo + * the check now. + * @B43_TXPWR_IGNORE_TSSI: Redo the recalculation, even if the average + * TSSI did not change. + */ +enum b43_phy_txpower_check_flags { + B43_TXPWR_IGNORE_TIME = (1 << 0), + B43_TXPWR_IGNORE_TSSI = (1 << 1), +}; + +struct work_struct; +void b43_phy_txpower_adjust_work(struct work_struct *work); + +/** + * b43_phy_shm_tssi_read - Read the average of the last 4 TSSI from SHM. + * + * @shm_offset: The SHM address to read the values from. + * + * Returns the average of the 4 TSSI values, or a negative error code. + */ +int b43_phy_shm_tssi_read(struct b43_wldev *dev, u16 shm_offset); + +/** + * b43_phy_switch_analog_generic - Generic PHY operation for switching the Analog. + * + * It does the switching based on the PHY0 core register. + * Do _not_ call this directly. Only use it as a switch_analog callback + * for struct b43_phy_operations. + */ +void b43_phyop_switch_analog_generic(struct b43_wldev *dev, bool on); + + +#endif /* LINUX_B43_PHY_COMMON_H_ */ diff --git a/drivers/net/wireless/b43/phy.c b/drivers/net/wireless/b43/phy_g.c index 305d4cd6fd0..e8c012c9abb 100644 --- a/drivers/net/wireless/b43/phy.c +++ b/drivers/net/wireless/b43/phy_g.c @@ -1,10 +1,11 @@ /* Broadcom B43 wireless driver + IEEE 802.11g PHY driver Copyright (c) 2005 Martin Langer <martin-langer@gmx.de>, Copyright (c) 2005-2007 Stefano Brivio <stefano.brivio@polimi.it> - Copyright (c) 2005, 2006 Michael Buesch <mb@bu3sch.de> + Copyright (c) 2005-2008 Michael Buesch <mb@bu3sch.de> Copyright (c) 2005, 2006 Danny van Dyk <kugelfang@gentoo.org> Copyright (c) 2005, 2006 Andreas Jaggi <andreas.jaggi@waterwave.ch> @@ -25,38 +26,14 @@ */ -#include <linux/delay.h> -#include <linux/io.h> -#include <linux/types.h> -#include <linux/bitrev.h> - #include "b43.h" -#include "phy.h" -#include "nphy.h" -#include "main.h" -#include "tables.h" +#include "phy_g.h" +#include "phy_common.h" #include "lo.h" -#include "wa.h" - - -static const s8 b43_tssi2dbm_b_table[] = { - 0x4D, 0x4C, 0x4B, 0x4A, - 0x4A, 0x49, 0x48, 0x47, - 0x47, 0x46, 0x45, 0x45, - 0x44, 0x43, 0x42, 0x42, - 0x41, 0x40, 0x3F, 0x3E, - 0x3D, 0x3C, 0x3B, 0x3A, - 0x39, 0x38, 0x37, 0x36, - 0x35, 0x34, 0x32, 0x31, - 0x30, 0x2F, 0x2D, 0x2C, - 0x2B, 0x29, 0x28, 0x26, - 0x25, 0x23, 0x21, 0x1F, - 0x1D, 0x1A, 0x17, 0x14, - 0x10, 0x0C, 0x06, 0x00, - -7, -7, -7, -7, - -7, -7, -7, -7, - -7, -7, -7, -7, -}; +#include "main.h" + +#include <linux/bitrev.h> + static const s8 b43_tssi2dbm_g_table[] = { 77, 77, 77, 76, @@ -84,8 +61,20 @@ const u8 b43_radio_channel_codes_bg[] = { 72, 84, }; + +static void b43_calc_nrssi_threshold(struct b43_wldev *dev); + + #define bitrev4(tmp) (bitrev8(tmp) >> 4) -static void b43_phy_initg(struct b43_wldev *dev); + + +/* Get the freq, as it has to be written to the device. */ +static inline u16 channel2freq_bg(u8 channel) +{ + B43_WARN_ON(!(channel >= 1 && channel <= 14)); + + return b43_radio_channel_codes_bg[channel - 1]; +} static void generate_rfatt_list(struct b43_wldev *dev, struct b43_rfatt_list *list) @@ -130,7 +119,7 @@ static void generate_rfatt_list(struct b43_wldev *dev, {.att = 9,.with_padmix = 1,}, }; - if (!b43_has_hardware_pctl(phy)) { + if (!b43_has_hardware_pctl(dev)) { /* Software pctl */ list->list = rfatt_0; list->len = ARRAY_SIZE(rfatt_0); @@ -174,140 +163,55 @@ static void generate_bbatt_list(struct b43_wldev *dev, list->max_val = 8; } -bool b43_has_hardware_pctl(struct b43_phy *phy) -{ - if (!phy->hardware_power_control) - return 0; - switch (phy->type) { - case B43_PHYTYPE_A: - if (phy->rev >= 5) - return 1; - break; - case B43_PHYTYPE_G: - if (phy->rev >= 6) - return 1; - break; - default: - B43_WARN_ON(1); - } - return 0; -} - static void b43_shm_clear_tssi(struct b43_wldev *dev) { - struct b43_phy *phy = &dev->phy; - - switch (phy->type) { - case B43_PHYTYPE_A: - b43_shm_write16(dev, B43_SHM_SHARED, 0x0068, 0x7F7F); - b43_shm_write16(dev, B43_SHM_SHARED, 0x006a, 0x7F7F); - break; - case B43_PHYTYPE_B: - case B43_PHYTYPE_G: - b43_shm_write16(dev, B43_SHM_SHARED, 0x0058, 0x7F7F); - b43_shm_write16(dev, B43_SHM_SHARED, 0x005a, 0x7F7F); - b43_shm_write16(dev, B43_SHM_SHARED, 0x0070, 0x7F7F); - b43_shm_write16(dev, B43_SHM_SHARED, 0x0072, 0x7F7F); - break; - } -} - -/* Lock the PHY registers against concurrent access from the microcode. - * This lock is nonrecursive. */ -void b43_phy_lock(struct b43_wldev *dev) -{ -#if B43_DEBUG - B43_WARN_ON(dev->phy.phy_locked); - dev->phy.phy_locked = 1; -#endif - B43_WARN_ON(dev->dev->id.revision < 3); - - if (!b43_is_mode(dev->wl, IEEE80211_IF_TYPE_AP)) - b43_power_saving_ctl_bits(dev, B43_PS_AWAKE); + b43_shm_write16(dev, B43_SHM_SHARED, 0x0058, 0x7F7F); + b43_shm_write16(dev, B43_SHM_SHARED, 0x005a, 0x7F7F); + b43_shm_write16(dev, B43_SHM_SHARED, 0x0070, 0x7F7F); + b43_shm_write16(dev, B43_SHM_SHARED, 0x0072, 0x7F7F); } -void b43_phy_unlock(struct b43_wldev *dev) +/* Synthetic PU workaround */ +static void b43_synth_pu_workaround(struct b43_wldev *dev, u8 channel) { -#if B43_DEBUG - B43_WARN_ON(!dev->phy.phy_locked); - dev->phy.phy_locked = 0; -#endif - B43_WARN_ON(dev->dev->id.revision < 3); + struct b43_phy *phy = &dev->phy; - if (!b43_is_mode(dev->wl, IEEE80211_IF_TYPE_AP)) - b43_power_saving_ctl_bits(dev, 0); -} + might_sleep(); -/* Different PHYs require different register routing flags. - * This adjusts (and does sanity checks on) the routing flags. - */ -static inline u16 adjust_phyreg_for_phytype(struct b43_phy *phy, - u16 offset, struct b43_wldev *dev) -{ - if (phy->type == B43_PHYTYPE_A) { - /* OFDM registers are base-registers for the A-PHY. */ - if ((offset & B43_PHYROUTE) == B43_PHYROUTE_OFDM_GPHY) { - offset &= ~B43_PHYROUTE; - offset |= B43_PHYROUTE_BASE; - } + if (phy->radio_ver != 0x2050 || phy->radio_rev >= 6) { + /* We do not need the workaround. */ + return; } -#if B43_DEBUG - if ((offset & B43_PHYROUTE) == B43_PHYROUTE_EXT_GPHY) { - /* Ext-G registers are only available on G-PHYs */ - if (phy->type != B43_PHYTYPE_G) { - b43err(dev->wl, "Invalid EXT-G PHY access at " - "0x%04X on PHY type %u\n", offset, phy->type); - dump_stack(); - } - } - if ((offset & B43_PHYROUTE) == B43_PHYROUTE_N_BMODE) { - /* N-BMODE registers are only available on N-PHYs */ - if (phy->type != B43_PHYTYPE_N) { - b43err(dev->wl, "Invalid N-BMODE PHY access at " - "0x%04X on PHY type %u\n", offset, phy->type); - dump_stack(); - } + if (channel <= 10) { + b43_write16(dev, B43_MMIO_CHANNEL, + channel2freq_bg(channel + 4)); + } else { + b43_write16(dev, B43_MMIO_CHANNEL, channel2freq_bg(1)); } -#endif /* B43_DEBUG */ - - return offset; -} - -u16 b43_phy_read(struct b43_wldev * dev, u16 offset) -{ - struct b43_phy *phy = &dev->phy; - - offset = adjust_phyreg_for_phytype(phy, offset, dev); - b43_write16(dev, B43_MMIO_PHY_CONTROL, offset); - return b43_read16(dev, B43_MMIO_PHY_DATA); + msleep(1); + b43_write16(dev, B43_MMIO_CHANNEL, channel2freq_bg(channel)); } -void b43_phy_write(struct b43_wldev *dev, u16 offset, u16 val) +/* Set the baseband attenuation value on chip. */ +void b43_gphy_set_baseband_attenuation(struct b43_wldev *dev, + u16 baseband_attenuation) { struct b43_phy *phy = &dev->phy; - offset = adjust_phyreg_for_phytype(phy, offset, dev); - b43_write16(dev, B43_MMIO_PHY_CONTROL, offset); - b43_write16(dev, B43_MMIO_PHY_DATA, val); -} - -void b43_phy_mask(struct b43_wldev *dev, u16 offset, u16 mask) -{ - b43_phy_write(dev, offset, - b43_phy_read(dev, offset) & mask); -} - -void b43_phy_set(struct b43_wldev *dev, u16 offset, u16 set) -{ - b43_phy_write(dev, offset, - b43_phy_read(dev, offset) | set); -} - -void b43_phy_maskset(struct b43_wldev *dev, u16 offset, u16 mask, u16 set) -{ - b43_phy_write(dev, offset, - (b43_phy_read(dev, offset) & mask) | set); + if (phy->analog == 0) { + b43_write16(dev, B43_MMIO_PHY0, (b43_read16(dev, B43_MMIO_PHY0) + & 0xFFF0) | + baseband_attenuation); + } else if (phy->analog > 1) { + b43_phy_write(dev, B43_PHY_DACCTL, + (b43_phy_read(dev, B43_PHY_DACCTL) + & 0xFFC3) | (baseband_attenuation << 2)); + } else { + b43_phy_write(dev, B43_PHY_DACCTL, + (b43_phy_read(dev, B43_PHY_DACCTL) + & 0xFF87) | (baseband_attenuation << 3)); + } } /* Adjust the transmission power output (G-PHY) */ @@ -316,7 +220,8 @@ void b43_set_txpower_g(struct b43_wldev *dev, const struct b43_rfatt *rfatt, u8 tx_control) { struct b43_phy *phy = &dev->phy; - struct b43_txpower_lo_control *lo = phy->lo_control; + struct b43_phy_g *gphy = phy->g; + struct b43_txpower_lo_control *lo = gphy->lo_control; u16 bb, rf; u16 tx_bias, tx_magn; @@ -327,11 +232,12 @@ void b43_set_txpower_g(struct b43_wldev *dev, if (unlikely(tx_bias == 0xFF)) tx_bias = 0; - /* Save the values for later */ - phy->tx_control = tx_control; - memcpy(&phy->rfatt, rfatt, sizeof(*rfatt)); - phy->rfatt.with_padmix = !!(tx_control & B43_TXCTL_TXMIX); - memcpy(&phy->bbatt, bbatt, sizeof(*bbatt)); + /* Save the values for later. Use memmove, because it's valid + * to pass &gphy->rfatt as rfatt pointer argument. Same for bbatt. */ + gphy->tx_control = tx_control; + memmove(&gphy->rfatt, rfatt, sizeof(*rfatt)); + gphy->rfatt.with_padmix = !!(tx_control & B43_TXCTL_TXMIX); + memmove(&gphy->bbatt, bbatt, sizeof(*bbatt)); if (b43_debug(dev, B43_DBG_XMITPOWER)) { b43dbg(dev->wl, "Tuning TX-power to bbatt(%u), " @@ -340,7 +246,7 @@ void b43_set_txpower_g(struct b43_wldev *dev, bb, rf, tx_control, tx_bias, tx_magn); } - b43_phy_set_baseband_attenuation(dev, bb); + b43_gphy_set_baseband_attenuation(dev, bb); b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_RFATT, rf); if (phy->radio_ver == 0x2050 && phy->radio_rev == 8) { b43_radio_write16(dev, 0x43, @@ -358,179 +264,23 @@ void b43_set_txpower_g(struct b43_wldev *dev, b43_radio_write16(dev, 0x52, (b43_radio_read16(dev, 0x52) & 0xFFF0) | (tx_bias & 0x000F)); } - if (phy->type == B43_PHYTYPE_G) - b43_lo_g_adjust(dev); -} - -static void default_baseband_attenuation(struct b43_wldev *dev, - struct b43_bbatt *bb) -{ - struct b43_phy *phy = &dev->phy; - - if (phy->radio_ver == 0x2050 && phy->radio_rev < 6) - bb->att = 0; - else - bb->att = 2; -} - -static void default_radio_attenuation(struct b43_wldev *dev, - struct b43_rfatt *rf) -{ - struct ssb_bus *bus = dev->dev->bus; - struct b43_phy *phy = &dev->phy; - - rf->with_padmix = 0; - - if (bus->boardinfo.vendor == SSB_BOARDVENDOR_BCM && - bus->boardinfo.type == SSB_BOARD_BCM4309G) { - if (bus->boardinfo.rev < 0x43) { - rf->att = 2; - return; - } else if (bus->boardinfo.rev < 0x51) { - rf->att = 3; - return; - } - } - - if (phy->type == B43_PHYTYPE_A) { - rf->att = 0x60; - return; - } - - switch (phy->radio_ver) { - case 0x2053: - switch (phy->radio_rev) { - case 1: - rf->att = 6; - return; - } - break; - case 0x2050: - switch (phy->radio_rev) { - case 0: - rf->att = 5; - return; - case 1: - if (phy->type == B43_PHYTYPE_G) { - if (bus->boardinfo.vendor == SSB_BOARDVENDOR_BCM - && bus->boardinfo.type == SSB_BOARD_BCM4309G - && bus->boardinfo.rev >= 30) - rf->att = 3; - else if (bus->boardinfo.vendor == - SSB_BOARDVENDOR_BCM - && bus->boardinfo.type == - SSB_BOARD_BU4306) - rf->att = 3; - else - rf->att = 1; - } else { - if (bus->boardinfo.vendor == SSB_BOARDVENDOR_BCM - && bus->boardinfo.type == SSB_BOARD_BCM4309G - && bus->boardinfo.rev >= 30) - rf->att = 7; - else - rf->att = 6; - } - return; - case 2: - if (phy->type == B43_PHYTYPE_G) { - if (bus->boardinfo.vendor == SSB_BOARDVENDOR_BCM - && bus->boardinfo.type == SSB_BOARD_BCM4309G - && bus->boardinfo.rev >= 30) - rf->att = 3; - else if (bus->boardinfo.vendor == - SSB_BOARDVENDOR_BCM - && bus->boardinfo.type == - SSB_BOARD_BU4306) - rf->att = 5; - else if (bus->chip_id == 0x4320) - rf->att = 4; - else - rf->att = 3; - } else - rf->att = 6; - return; - case 3: - rf->att = 5; - return; - case 4: - case 5: - rf->att = 1; - return; - case 6: - case 7: - rf->att = 5; - return; - case 8: - rf->att = 0xA; - rf->with_padmix = 1; - return; - case 9: - default: - rf->att = 5; - return; - } - } - rf->att = 5; -} - -static u16 default_tx_control(struct b43_wldev *dev) -{ - struct b43_phy *phy = &dev->phy; - - if (phy->radio_ver != 0x2050) - return 0; - if (phy->radio_rev == 1) - return B43_TXCTL_PA2DB | B43_TXCTL_TXMIX; - if (phy->radio_rev < 6) - return B43_TXCTL_PA2DB; - if (phy->radio_rev == 8) - return B43_TXCTL_TXMIX; - return 0; -} - -/* This func is called "PHY calibrate" in the specs... */ -void b43_phy_early_init(struct b43_wldev *dev) -{ - struct b43_phy *phy = &dev->phy; - struct b43_txpower_lo_control *lo = phy->lo_control; - - default_baseband_attenuation(dev, &phy->bbatt); - default_radio_attenuation(dev, &phy->rfatt); - phy->tx_control = (default_tx_control(dev) << 4); - - /* Commit previous writes */ - b43_read32(dev, B43_MMIO_MACCTL); - - if (phy->type == B43_PHYTYPE_B || phy->type == B43_PHYTYPE_G) { - generate_rfatt_list(dev, &lo->rfatt_list); - generate_bbatt_list(dev, &lo->bbatt_list); - } - if (phy->type == B43_PHYTYPE_G && phy->rev == 1) { - /* Workaround: Temporarly disable gmode through the early init - * phase, as the gmode stuff is not needed for phy rev 1 */ - phy->gmode = 0; - b43_wireless_core_reset(dev, 0); - b43_phy_initg(dev); - phy->gmode = 1; - b43_wireless_core_reset(dev, B43_TMSLOW_GMODE); - } + b43_lo_g_adjust(dev); } /* GPHY_TSSI_Power_Lookup_Table_Init */ static void b43_gphy_tssi_power_lt_init(struct b43_wldev *dev) { - struct b43_phy *phy = &dev->phy; + struct b43_phy_g *gphy = dev->phy.g; int i; u16 value; for (i = 0; i < 32; i++) - b43_ofdmtab_write16(dev, 0x3C20, i, phy->tssi2dbm[i]); + b43_ofdmtab_write16(dev, 0x3C20, i, gphy->tssi2dbm[i]); for (i = 32; i < 64; i++) - b43_ofdmtab_write16(dev, 0x3C00, i - 32, phy->tssi2dbm[i]); + b43_ofdmtab_write16(dev, 0x3C00, i - 32, gphy->tssi2dbm[i]); for (i = 0; i < 64; i += 2) { - value = (u16) phy->tssi2dbm[i]; - value |= ((u16) phy->tssi2dbm[i + 1]) << 8; + value = (u16) gphy->tssi2dbm[i]; + value |= ((u16) gphy->tssi2dbm[i + 1]) << 8; b43_phy_write(dev, 0x380 + (i / 2), value); } } @@ -539,7 +289,8 @@ static void b43_gphy_tssi_power_lt_init(struct b43_wldev *dev) static void b43_gphy_gain_lt_init(struct b43_wldev *dev) { struct b43_phy *phy = &dev->phy; - struct b43_txpower_lo_control *lo = phy->lo_control; + struct b43_phy_g *gphy = phy->g; + struct b43_txpower_lo_control *lo = gphy->lo_control; u16 nr_written = 0; u16 tmp; u8 rf, bb; @@ -561,1509 +312,6 @@ static void b43_gphy_gain_lt_init(struct b43_wldev *dev) } } -static void hardware_pctl_init_aphy(struct b43_wldev *dev) -{ - //TODO -} - -static void hardware_pctl_init_gphy(struct b43_wldev *dev) -{ - struct b43_phy *phy = &dev->phy; - - b43_phy_write(dev, 0x0036, (b43_phy_read(dev, 0x0036) & 0xFFC0) - | (phy->tgt_idle_tssi - phy->cur_idle_tssi)); - b43_phy_write(dev, 0x0478, (b43_phy_read(dev, 0x0478) & 0xFF00) - | (phy->tgt_idle_tssi - phy->cur_idle_tssi)); - b43_gphy_tssi_power_lt_init(dev); - b43_gphy_gain_lt_init(dev); - b43_phy_write(dev, 0x0060, b43_phy_read(dev, 0x0060) & 0xFFBF); - b43_phy_write(dev, 0x0014, 0x0000); - - B43_WARN_ON(phy->rev < 6); - b43_phy_write(dev, 0x0478, b43_phy_read(dev, 0x0478) - | 0x0800); - b43_phy_write(dev, 0x0478, b43_phy_read(dev, 0x0478) - & 0xFEFF); - b43_phy_write(dev, 0x0801, b43_phy_read(dev, 0x0801) - & 0xFFBF); - - b43_gphy_dc_lt_init(dev, 1); -} - -/* HardwarePowerControl init for A and G PHY */ -static void b43_hardware_pctl_init(struct b43_wldev *dev) -{ - struct b43_phy *phy = &dev->phy; - - if (!b43_has_hardware_pctl(phy)) { - /* No hardware power control */ - b43_hf_write(dev, b43_hf_read(dev) & ~B43_HF_HWPCTL); - return; - } - /* Init the hwpctl related hardware */ - switch (phy->type) { - case B43_PHYTYPE_A: - hardware_pctl_init_aphy(dev); - break; - case B43_PHYTYPE_G: - hardware_pctl_init_gphy(dev); - break; - default: - B43_WARN_ON(1); - } - /* Enable hardware pctl in firmware. */ - b43_hf_write(dev, b43_hf_read(dev) | B43_HF_HWPCTL); -} - -static void b43_hardware_pctl_early_init(struct b43_wldev *dev) -{ - struct b43_phy *phy = &dev->phy; - - if (!b43_has_hardware_pctl(phy)) { - b43_phy_write(dev, 0x047A, 0xC111); - return; - } - - b43_phy_write(dev, 0x0036, b43_phy_read(dev, 0x0036) & 0xFEFF); - b43_phy_write(dev, 0x002F, 0x0202); - b43_phy_write(dev, 0x047C, b43_phy_read(dev, 0x047C) | 0x0002); - b43_phy_write(dev, 0x047A, b43_phy_read(dev, 0x047A) | 0xF000); - if (phy->radio_ver == 0x2050 && phy->radio_rev == 8) { - b43_phy_write(dev, 0x047A, (b43_phy_read(dev, 0x047A) - & 0xFF0F) | 0x0010); - b43_phy_write(dev, 0x005D, b43_phy_read(dev, 0x005D) - | 0x8000); - b43_phy_write(dev, 0x004E, (b43_phy_read(dev, 0x004E) - & 0xFFC0) | 0x0010); - b43_phy_write(dev, 0x002E, 0xC07F); - b43_phy_write(dev, 0x0036, b43_phy_read(dev, 0x0036) - | 0x0400); - } else { - b43_phy_write(dev, 0x0036, b43_phy_read(dev, 0x0036) - | 0x0200); - b43_phy_write(dev, 0x0036, b43_phy_read(dev, 0x0036) - | 0x0400); - b43_phy_write(dev, 0x005D, b43_phy_read(dev, 0x005D) - & 0x7FFF); - b43_phy_write(dev, 0x004F, b43_phy_read(dev, 0x004F) - & 0xFFFE); - b43_phy_write(dev, 0x004E, (b43_phy_read(dev, 0x004E) - & 0xFFC0) | 0x0010); - b43_phy_write(dev, 0x002E, 0xC07F); - b43_phy_write(dev, 0x047A, (b43_phy_read(dev, 0x047A) - & 0xFF0F) | 0x0010); - } -} - -/* Intialize B/G PHY power control - * as described in http://bcm-specs.sipsolutions.net/InitPowerControl - */ -static void b43_phy_init_pctl(struct b43_wldev *dev) -{ - struct ssb_bus *bus = dev->dev->bus; - struct b43_phy *phy = &dev->phy; - struct b43_rfatt old_rfatt; - struct b43_bbatt old_bbatt; - u8 old_tx_control = 0; - - if ((bus->boardinfo.vendor == SSB_BOARDVENDOR_BCM) && - (bus->boardinfo.type == SSB_BOARD_BU4306)) - return; - - b43_phy_write(dev, 0x0028, 0x8018); - - /* This does something with the Analog... */ - b43_write16(dev, B43_MMIO_PHY0, b43_read16(dev, B43_MMIO_PHY0) - & 0xFFDF); - - if (phy->type == B43_PHYTYPE_G && !phy->gmode) - return; - b43_hardware_pctl_early_init(dev); - if (phy->cur_idle_tssi == 0) { - if (phy->radio_ver == 0x2050 && phy->analog == 0) { - b43_radio_write16(dev, 0x0076, - (b43_radio_read16(dev, 0x0076) - & 0x00F7) | 0x0084); - } else { - struct b43_rfatt rfatt; - struct b43_bbatt bbatt; - - memcpy(&old_rfatt, &phy->rfatt, sizeof(old_rfatt)); - memcpy(&old_bbatt, &phy->bbatt, sizeof(old_bbatt)); - old_tx_control = phy->tx_control; - - bbatt.att = 11; - if (phy->radio_rev == 8) { - rfatt.att = 15; - rfatt.with_padmix = 1; - } else { - rfatt.att = 9; - rfatt.with_padmix = 0; - } - b43_set_txpower_g(dev, &bbatt, &rfatt, 0); - } - b43_dummy_transmission(dev); - phy->cur_idle_tssi = b43_phy_read(dev, B43_PHY_ITSSI); - if (B43_DEBUG) { - /* Current-Idle-TSSI sanity check. */ - if (abs(phy->cur_idle_tssi - phy->tgt_idle_tssi) >= 20) { - b43dbg(dev->wl, - "!WARNING! Idle-TSSI phy->cur_idle_tssi " - "measuring failed. (cur=%d, tgt=%d). Disabling TX power " - "adjustment.\n", phy->cur_idle_tssi, - phy->tgt_idle_tssi); - phy->cur_idle_tssi = 0; - } - } - if (phy->radio_ver == 0x2050 && phy->analog == 0) { - b43_radio_write16(dev, 0x0076, - b43_radio_read16(dev, 0x0076) - & 0xFF7B); - } else { - b43_set_txpower_g(dev, &old_bbatt, - &old_rfatt, old_tx_control); - } - } - b43_hardware_pctl_init(dev); - b43_shm_clear_tssi(dev); -} - -static void b43_phy_rssiagc(struct b43_wldev *dev, u8 enable) -{ - int i; - - if (dev->phy.rev < 3) { - if (enable) - for (i = 0; i < B43_TAB_RSSIAGC1_SIZE; i++) { - b43_ofdmtab_write16(dev, - B43_OFDMTAB_LNAHPFGAIN1, i, 0xFFF8); - b43_ofdmtab_write16(dev, - B43_OFDMTAB_WRSSI, i, 0xFFF8); - } - else - for (i = 0; i < B43_TAB_RSSIAGC1_SIZE; i++) { - b43_ofdmtab_write16(dev, - B43_OFDMTAB_LNAHPFGAIN1, i, b43_tab_rssiagc1[i]); - b43_ofdmtab_write16(dev, - B43_OFDMTAB_WRSSI, i, b43_tab_rssiagc1[i]); - } - } else { - if (enable) - for (i = 0; i < B43_TAB_RSSIAGC1_SIZE; i++) - b43_ofdmtab_write16(dev, - B43_OFDMTAB_WRSSI, i, 0x0820); - else - for (i = 0; i < B43_TAB_RSSIAGC2_SIZE; i++) - b43_ofdmtab_write16(dev, - B43_OFDMTAB_WRSSI, i, b43_tab_rssiagc2[i]); - } -} - -static void b43_phy_ww(struct b43_wldev *dev) -{ - u16 b, curr_s, best_s = 0xFFFF; - int i; - - b43_phy_write(dev, B43_PHY_CRS0, - b43_phy_read(dev, B43_PHY_CRS0) & ~B43_PHY_CRS0_EN); - b43_phy_write(dev, B43_PHY_OFDM(0x1B), - b43_phy_read(dev, B43_PHY_OFDM(0x1B)) | 0x1000); - b43_phy_write(dev, B43_PHY_OFDM(0x82), - (b43_phy_read(dev, B43_PHY_OFDM(0x82)) & 0xF0FF) | 0x0300); - b43_radio_write16(dev, 0x0009, - b43_radio_read16(dev, 0x0009) | 0x0080); - b43_radio_write16(dev, 0x0012, - (b43_radio_read16(dev, 0x0012) & 0xFFFC) | 0x0002); - b43_wa_initgains(dev); - b43_phy_write(dev, B43_PHY_OFDM(0xBA), 0x3ED5); - b = b43_phy_read(dev, B43_PHY_PWRDOWN); - b43_phy_write(dev, B43_PHY_PWRDOWN, (b & 0xFFF8) | 0x0005); - b43_radio_write16(dev, 0x0004, - b43_radio_read16(dev, 0x0004) | 0x0004); - for (i = 0x10; i <= 0x20; i++) { - b43_radio_write16(dev, 0x0013, i); - curr_s = b43_phy_read(dev, B43_PHY_OTABLEQ) & 0x00FF; - if (!curr_s) { - best_s = 0x0000; - break; - } else if (curr_s >= 0x0080) - curr_s = 0x0100 - curr_s; - if (curr_s < best_s) - best_s = curr_s; - } - b43_phy_write(dev, B43_PHY_PWRDOWN, b); - b43_radio_write16(dev, 0x0004, - b43_radio_read16(dev, 0x0004) & 0xFFFB); - b43_radio_write16(dev, 0x0013, best_s); - b43_ofdmtab_write16(dev, B43_OFDMTAB_AGC1_R1, 0, 0xFFEC); - b43_phy_write(dev, B43_PHY_OFDM(0xB7), 0x1E80); - b43_phy_write(dev, B43_PHY_OFDM(0xB6), 0x1C00); - b43_phy_write(dev, B43_PHY_OFDM(0xB5), 0x0EC0); - b43_phy_write(dev, B43_PHY_OFDM(0xB2), 0x00C0); - b43_phy_write(dev, B43_PHY_OFDM(0xB9), 0x1FFF); - b43_phy_write(dev, B43_PHY_OFDM(0xBB), - (b43_phy_read(dev, B43_PHY_OFDM(0xBB)) & 0xF000) | 0x0053); - b43_phy_write(dev, B43_PHY_OFDM61, - (b43_phy_read(dev, B43_PHY_OFDM61) & 0xFE1F) | 0x0120); - b43_phy_write(dev, B43_PHY_OFDM(0x13), - (b43_phy_read(dev, B43_PHY_OFDM(0x13)) & 0x0FFF) | 0x3000); - b43_phy_write(dev, B43_PHY_OFDM(0x14), - (b43_phy_read(dev, B43_PHY_OFDM(0x14)) & 0x0FFF) | 0x3000); - b43_ofdmtab_write16(dev, B43_OFDMTAB_AGC1, 6, 0x0017); - for (i = 0; i < 6; i++) - b43_ofdmtab_write16(dev, B43_OFDMTAB_AGC1, i, 0x000F); - b43_ofdmtab_write16(dev, B43_OFDMTAB_AGC1, 0x0D, 0x000E); - b43_ofdmtab_write16(dev, B43_OFDMTAB_AGC1, 0x0E, 0x0011); - b43_ofdmtab_write16(dev, B43_OFDMTAB_AGC1, 0x0F, 0x0013); - b43_phy_write(dev, B43_PHY_OFDM(0x33), 0x5030); - b43_phy_write(dev, B43_PHY_CRS0, - b43_phy_read(dev, B43_PHY_CRS0) | B43_PHY_CRS0_EN); -} - -/* Initialize APHY. This is also called for the GPHY in some cases. */ -static void b43_phy_inita(struct b43_wldev *dev) -{ - struct ssb_bus *bus = dev->dev->bus; - struct b43_phy *phy = &dev->phy; - - might_sleep(); - - if (phy->rev >= 6) { - if (phy->type == B43_PHYTYPE_A) - b43_phy_write(dev, B43_PHY_OFDM(0x1B), - b43_phy_read(dev, B43_PHY_OFDM(0x1B)) & ~0x1000); - if (b43_phy_read(dev, B43_PHY_ENCORE) & B43_PHY_ENCORE_EN) - b43_phy_write(dev, B43_PHY_ENCORE, - b43_phy_read(dev, B43_PHY_ENCORE) | 0x0010); - else - b43_phy_write(dev, B43_PHY_ENCORE, - b43_phy_read(dev, B43_PHY_ENCORE) & ~0x1010); - } - - b43_wa_all(dev); - - if (phy->type == B43_PHYTYPE_A) { - if (phy->gmode && (phy->rev < 3)) - b43_phy_write(dev, 0x0034, - b43_phy_read(dev, 0x0034) | 0x0001); - b43_phy_rssiagc(dev, 0); - - b43_phy_write(dev, B43_PHY_CRS0, - b43_phy_read(dev, B43_PHY_CRS0) | B43_PHY_CRS0_EN); - - b43_radio_init2060(dev); - - if ((bus->boardinfo.vendor == SSB_BOARDVENDOR_BCM) && - ((bus->boardinfo.type == SSB_BOARD_BU4306) || - (bus->boardinfo.type == SSB_BOARD_BU4309))) { - ; //TODO: A PHY LO - } - - if (phy->rev >= 3) - b43_phy_ww(dev); - - hardware_pctl_init_aphy(dev); - - //TODO: radar detection - } - - if ((phy->type == B43_PHYTYPE_G) && - (dev->dev->bus->sprom.boardflags_lo & B43_BFL_PACTRL)) { - b43_phy_write(dev, B43_PHY_OFDM(0x6E), - (b43_phy_read(dev, B43_PHY_OFDM(0x6E)) - & 0xE000) | 0x3CF); - } -} - -static void b43_phy_initb5(struct b43_wldev *dev) -{ - struct ssb_bus *bus = dev->dev->bus; - struct b43_phy *phy = &dev->phy; - u16 offset, value; - u8 old_channel; - - if (phy->analog == 1) { - b43_radio_write16(dev, 0x007A, b43_radio_read16(dev, 0x007A) - | 0x0050); - } - if ((bus->boardinfo.vendor != SSB_BOARDVENDOR_BCM) && - (bus->boardinfo.type != SSB_BOARD_BU4306)) { - value = 0x2120; - for (offset = 0x00A8; offset < 0x00C7; offset++) { - b43_phy_write(dev, offset, value); - value += 0x202; - } - } - b43_phy_write(dev, 0x0035, (b43_phy_read(dev, 0x0035) & 0xF0FF) - | 0x0700); - if (phy->radio_ver == 0x2050) - b43_phy_write(dev, 0x0038, 0x0667); - - if (phy->gmode || phy->rev >= 2) { - if (phy->radio_ver == 0x2050) { - b43_radio_write16(dev, 0x007A, - b43_radio_read16(dev, 0x007A) - | 0x0020); - b43_radio_write16(dev, 0x0051, - b43_radio_read16(dev, 0x0051) - | 0x0004); - } - b43_write16(dev, B43_MMIO_PHY_RADIO, 0x0000); - - b43_phy_write(dev, 0x0802, b43_phy_read(dev, 0x0802) | 0x0100); - b43_phy_write(dev, 0x042B, b43_phy_read(dev, 0x042B) | 0x2000); - - b43_phy_write(dev, 0x001C, 0x186A); - - b43_phy_write(dev, 0x0013, - (b43_phy_read(dev, 0x0013) & 0x00FF) | 0x1900); - b43_phy_write(dev, 0x0035, - (b43_phy_read(dev, 0x0035) & 0xFFC0) | 0x0064); - b43_phy_write(dev, 0x005D, - (b43_phy_read(dev, 0x005D) & 0xFF80) | 0x000A); - } - - if (dev->bad_frames_preempt) { - b43_phy_write(dev, B43_PHY_RADIO_BITFIELD, - b43_phy_read(dev, - B43_PHY_RADIO_BITFIELD) | (1 << 11)); - } - - if (phy->analog == 1) { - b43_phy_write(dev, 0x0026, 0xCE00); - b43_phy_write(dev, 0x0021, 0x3763); - b43_phy_write(dev, 0x0022, 0x1BC3); - b43_phy_write(dev, 0x0023, 0x06F9); - b43_phy_write(dev, 0x0024, 0x037E); - } else - b43_phy_write(dev, 0x0026, 0xCC00); - b43_phy_write(dev, 0x0030, 0x00C6); - b43_write16(dev, 0x03EC, 0x3F22); - - if (phy->analog == 1) - b43_phy_write(dev, 0x0020, 0x3E1C); - else - b43_phy_write(dev, 0x0020, 0x301C); - - if (phy->analog == 0) - b43_write16(dev, 0x03E4, 0x3000); - - old_channel = phy->channel; - /* Force to channel 7, even if not supported. */ - b43_radio_selectchannel(dev, 7, 0); - - if (phy->radio_ver != 0x2050) { - b43_radio_write16(dev, 0x0075, 0x0080); - b43_radio_write16(dev, 0x0079, 0x0081); - } - - b43_radio_write16(dev, 0x0050, 0x0020); - b43_radio_write16(dev, 0x0050, 0x0023); - - if (phy->radio_ver == 0x2050) { - b43_radio_write16(dev, 0x0050, 0x0020); - b43_radio_write16(dev, 0x005A, 0x0070); - } - - b43_radio_write16(dev, 0x005B, 0x007B); - b43_radio_write16(dev, 0x005C, 0x00B0); - - b43_radio_write16(dev, 0x007A, b43_radio_read16(dev, 0x007A) | 0x0007); - - b43_radio_selectchannel(dev, old_channel, 0); - - b43_phy_write(dev, 0x0014, 0x0080); - b43_phy_write(dev, 0x0032, 0x00CA); - b43_phy_write(dev, 0x002A, 0x88A3); - - b43_set_txpower_g(dev, &phy->bbatt, &phy->rfatt, phy->tx_control); - - if (phy->radio_ver == 0x2050) - b43_radio_write16(dev, 0x005D, 0x000D); - - b43_write16(dev, 0x03E4, (b43_read16(dev, 0x03E4) & 0xFFC0) | 0x0004); -} - -static void b43_phy_initb6(struct b43_wldev *dev) -{ - struct b43_phy *phy = &dev->phy; - u16 offset, val; - u8 old_channel; - - b43_phy_write(dev, 0x003E, 0x817A); - b43_radio_write16(dev, 0x007A, - (b43_radio_read16(dev, 0x007A) | 0x0058)); - if (phy->radio_rev == 4 || phy->radio_rev == 5) { - b43_radio_write16(dev, 0x51, 0x37); - b43_radio_write16(dev, 0x52, 0x70); - b43_radio_write16(dev, 0x53, 0xB3); - b43_radio_write16(dev, 0x54, 0x9B); - b43_radio_write16(dev, 0x5A, 0x88); - b43_radio_write16(dev, 0x5B, 0x88); - b43_radio_write16(dev, 0x5D, 0x88); - b43_radio_write16(dev, 0x5E, 0x88); - b43_radio_write16(dev, 0x7D, 0x88); - b43_hf_write(dev, b43_hf_read(dev) - | B43_HF_TSSIRPSMW); - } - B43_WARN_ON(phy->radio_rev == 6 || phy->radio_rev == 7); /* We had code for these revs here... */ - if (phy->radio_rev == 8) { - b43_radio_write16(dev, 0x51, 0); - b43_radio_write16(dev, 0x52, 0x40); - b43_radio_write16(dev, 0x53, 0xB7); - b43_radio_write16(dev, 0x54, 0x98); - b43_radio_write16(dev, 0x5A, 0x88); - b43_radio_write16(dev, 0x5B, 0x6B); - b43_radio_write16(dev, 0x5C, 0x0F); - if (dev->dev->bus->sprom.boardflags_lo & B43_BFL_ALTIQ) { - b43_radio_write16(dev, 0x5D, 0xFA); - b43_radio_write16(dev, 0x5E, 0xD8); - } else { - b43_radio_write16(dev, 0x5D, 0xF5); - b43_radio_write16(dev, 0x5E, 0xB8); - } - b43_radio_write16(dev, 0x0073, 0x0003); - b43_radio_write16(dev, 0x007D, 0x00A8); - b43_radio_write16(dev, 0x007C, 0x0001); - b43_radio_write16(dev, 0x007E, 0x0008); - } - val = 0x1E1F; - for (offset = 0x0088; offset < 0x0098; offset++) { - b43_phy_write(dev, offset, val); - val -= 0x0202; - } - val = 0x3E3F; - for (offset = 0x0098; offset < 0x00A8; offset++) { - b43_phy_write(dev, offset, val); - val -= 0x0202; - } - val = 0x2120; - for (offset = 0x00A8; offset < 0x00C8; offset++) { - b43_phy_write(dev, offset, (val & 0x3F3F)); - val += 0x0202; - } - if (phy->type == B43_PHYTYPE_G) { - b43_radio_write16(dev, 0x007A, - b43_radio_read16(dev, 0x007A) | 0x0020); - b43_radio_write16(dev, 0x0051, - b43_radio_read16(dev, 0x0051) | 0x0004); - b43_phy_write(dev, 0x0802, b43_phy_read(dev, 0x0802) | 0x0100); - b43_phy_write(dev, 0x042B, b43_phy_read(dev, 0x042B) | 0x2000); - b43_phy_write(dev, 0x5B, 0); - b43_phy_write(dev, 0x5C, 0); - } - - old_channel = phy->channel; - if (old_channel >= 8) - b43_radio_selectchannel(dev, 1, 0); - else - b43_radio_selectchannel(dev, 13, 0); - - b43_radio_write16(dev, 0x0050, 0x0020); - b43_radio_write16(dev, 0x0050, 0x0023); - udelay(40); - if (phy->radio_rev < 6 || phy->radio_rev == 8) { - b43_radio_write16(dev, 0x7C, (b43_radio_read16(dev, 0x7C) - | 0x0002)); - b43_radio_write16(dev, 0x50, 0x20); - } - if (phy->radio_rev <= 2) { - b43_radio_write16(dev, 0x7C, 0x20); - b43_radio_write16(dev, 0x5A, 0x70); - b43_radio_write16(dev, 0x5B, 0x7B); - b43_radio_write16(dev, 0x5C, 0xB0); - } - b43_radio_write16(dev, 0x007A, - (b43_radio_read16(dev, 0x007A) & 0x00F8) | 0x0007); - - b43_radio_selectchannel(dev, old_channel, 0); - - b43_phy_write(dev, 0x0014, 0x0200); - if (phy->radio_rev >= 6) - b43_phy_write(dev, 0x2A, 0x88C2); - else - b43_phy_write(dev, 0x2A, 0x8AC0); - b43_phy_write(dev, 0x0038, 0x0668); - b43_set_txpower_g(dev, &phy->bbatt, &phy->rfatt, phy->tx_control); - if (phy->radio_rev <= 5) { - b43_phy_write(dev, 0x5D, (b43_phy_read(dev, 0x5D) - & 0xFF80) | 0x0003); - } - if (phy->radio_rev <= 2) - b43_radio_write16(dev, 0x005D, 0x000D); - - if (phy->analog == 4) { - b43_write16(dev, 0x3E4, 9); - b43_phy_write(dev, 0x61, b43_phy_read(dev, 0x61) - & 0x0FFF); - } else { - b43_phy_write(dev, 0x0002, (b43_phy_read(dev, 0x0002) & 0xFFC0) - | 0x0004); - } - if (phy->type == B43_PHYTYPE_B) - B43_WARN_ON(1); - else if (phy->type == B43_PHYTYPE_G) - b43_write16(dev, 0x03E6, 0x0); -} - -static void b43_calc_loopback_gain(struct b43_wldev *dev) -{ - struct b43_phy *phy = &dev->phy; - u16 backup_phy[16] = { 0 }; - u16 backup_radio[3]; - u16 backup_bband; - u16 i, j, loop_i_max; - u16 trsw_rx; - u16 loop1_outer_done, loop1_inner_done; - - backup_phy[0] = b43_phy_read(dev, B43_PHY_CRS0); - backup_phy[1] = b43_phy_read(dev, B43_PHY_CCKBBANDCFG); - backup_phy[2] = b43_phy_read(dev, B43_PHY_RFOVER); - backup_phy[3] = b43_phy_read(dev, B43_PHY_RFOVERVAL); - if (phy->rev != 1) { /* Not in specs, but needed to prevent PPC machine check */ - backup_phy[4] = b43_phy_read(dev, B43_PHY_ANALOGOVER); - backup_phy[5] = b43_phy_read(dev, B43_PHY_ANALOGOVERVAL); - } - backup_phy[6] = b43_phy_read(dev, B43_PHY_CCK(0x5A)); - backup_phy[7] = b43_phy_read(dev, B43_PHY_CCK(0x59)); - backup_phy[8] = b43_phy_read(dev, B43_PHY_CCK(0x58)); - backup_phy[9] = b43_phy_read(dev, B43_PHY_CCK(0x0A)); - backup_phy[10] = b43_phy_read(dev, B43_PHY_CCK(0x03)); - backup_phy[11] = b43_phy_read(dev, B43_PHY_LO_MASK); - backup_phy[12] = b43_phy_read(dev, B43_PHY_LO_CTL); - backup_phy[13] = b43_phy_read(dev, B43_PHY_CCK(0x2B)); - backup_phy[14] = b43_phy_read(dev, B43_PHY_PGACTL); - backup_phy[15] = b43_phy_read(dev, B43_PHY_LO_LEAKAGE); - backup_bband = phy->bbatt.att; - backup_radio[0] = b43_radio_read16(dev, 0x52); - backup_radio[1] = b43_radio_read16(dev, 0x43); - backup_radio[2] = b43_radio_read16(dev, 0x7A); - - b43_phy_write(dev, B43_PHY_CRS0, - b43_phy_read(dev, B43_PHY_CRS0) & 0x3FFF); - b43_phy_write(dev, B43_PHY_CCKBBANDCFG, - b43_phy_read(dev, B43_PHY_CCKBBANDCFG) | 0x8000); - b43_phy_write(dev, B43_PHY_RFOVER, - b43_phy_read(dev, B43_PHY_RFOVER) | 0x0002); - b43_phy_write(dev, B43_PHY_RFOVERVAL, - b43_phy_read(dev, B43_PHY_RFOVERVAL) & 0xFFFD); - b43_phy_write(dev, B43_PHY_RFOVER, - b43_phy_read(dev, B43_PHY_RFOVER) | 0x0001); - b43_phy_write(dev, B43_PHY_RFOVERVAL, - b43_phy_read(dev, B43_PHY_RFOVERVAL) & 0xFFFE); - if (phy->rev != 1) { /* Not in specs, but needed to prevent PPC machine check */ - b43_phy_write(dev, B43_PHY_ANALOGOVER, - b43_phy_read(dev, B43_PHY_ANALOGOVER) | 0x0001); - b43_phy_write(dev, B43_PHY_ANALOGOVERVAL, - b43_phy_read(dev, - B43_PHY_ANALOGOVERVAL) & 0xFFFE); - b43_phy_write(dev, B43_PHY_ANALOGOVER, - b43_phy_read(dev, B43_PHY_ANALOGOVER) | 0x0002); - b43_phy_write(dev, B43_PHY_ANALOGOVERVAL, - b43_phy_read(dev, - B43_PHY_ANALOGOVERVAL) & 0xFFFD); - } - b43_phy_write(dev, B43_PHY_RFOVER, - b43_phy_read(dev, B43_PHY_RFOVER) | 0x000C); - b43_phy_write(dev, B43_PHY_RFOVERVAL, - b43_phy_read(dev, B43_PHY_RFOVERVAL) | 0x000C); - b43_phy_write(dev, B43_PHY_RFOVER, - b43_phy_read(dev, B43_PHY_RFOVER) | 0x0030); - b43_phy_write(dev, B43_PHY_RFOVERVAL, - (b43_phy_read(dev, B43_PHY_RFOVERVAL) - & 0xFFCF) | 0x10); - - b43_phy_write(dev, B43_PHY_CCK(0x5A), 0x0780); - b43_phy_write(dev, B43_PHY_CCK(0x59), 0xC810); - b43_phy_write(dev, B43_PHY_CCK(0x58), 0x000D); - - b43_phy_write(dev, B43_PHY_CCK(0x0A), - b43_phy_read(dev, B43_PHY_CCK(0x0A)) | 0x2000); - if (phy->rev != 1) { /* Not in specs, but needed to prevent PPC machine check */ - b43_phy_write(dev, B43_PHY_ANALOGOVER, - b43_phy_read(dev, B43_PHY_ANALOGOVER) | 0x0004); - b43_phy_write(dev, B43_PHY_ANALOGOVERVAL, - b43_phy_read(dev, - B43_PHY_ANALOGOVERVAL) & 0xFFFB); - } - b43_phy_write(dev, B43_PHY_CCK(0x03), - (b43_phy_read(dev, B43_PHY_CCK(0x03)) - & 0xFF9F) | 0x40); - - if (phy->radio_rev == 8) { - b43_radio_write16(dev, 0x43, 0x000F); - } else { - b43_radio_write16(dev, 0x52, 0); - b43_radio_write16(dev, 0x43, (b43_radio_read16(dev, 0x43) - & 0xFFF0) | 0x9); - } - b43_phy_set_baseband_attenuation(dev, 11); - - if (phy->rev >= 3) - b43_phy_write(dev, B43_PHY_LO_MASK, 0xC020); - else - b43_phy_write(dev, B43_PHY_LO_MASK, 0x8020); - b43_phy_write(dev, B43_PHY_LO_CTL, 0); - - b43_phy_write(dev, B43_PHY_CCK(0x2B), - (b43_phy_read(dev, B43_PHY_CCK(0x2B)) - & 0xFFC0) | 0x01); - b43_phy_write(dev, B43_PHY_CCK(0x2B), - (b43_phy_read(dev, B43_PHY_CCK(0x2B)) - & 0xC0FF) | 0x800); - - b43_phy_write(dev, B43_PHY_RFOVER, - b43_phy_read(dev, B43_PHY_RFOVER) | 0x0100); - b43_phy_write(dev, B43_PHY_RFOVERVAL, - b43_phy_read(dev, B43_PHY_RFOVERVAL) & 0xCFFF); - - if (dev->dev->bus->sprom.boardflags_lo & B43_BFL_EXTLNA) { - if (phy->rev >= 7) { - b43_phy_write(dev, B43_PHY_RFOVER, - b43_phy_read(dev, B43_PHY_RFOVER) - | 0x0800); - b43_phy_write(dev, B43_PHY_RFOVERVAL, - b43_phy_read(dev, B43_PHY_RFOVERVAL) - | 0x8000); - } - } - b43_radio_write16(dev, 0x7A, b43_radio_read16(dev, 0x7A) - & 0x00F7); - - j = 0; - loop_i_max = (phy->radio_rev == 8) ? 15 : 9; - for (i = 0; i < loop_i_max; i++) { - for (j = 0; j < 16; j++) { - b43_radio_write16(dev, 0x43, i); - b43_phy_write(dev, B43_PHY_RFOVERVAL, - (b43_phy_read(dev, B43_PHY_RFOVERVAL) - & 0xF0FF) | (j << 8)); - b43_phy_write(dev, B43_PHY_PGACTL, - (b43_phy_read(dev, B43_PHY_PGACTL) - & 0x0FFF) | 0xA000); - b43_phy_write(dev, B43_PHY_PGACTL, - b43_phy_read(dev, B43_PHY_PGACTL) - | 0xF000); - udelay(20); - if (b43_phy_read(dev, B43_PHY_LO_LEAKAGE) >= 0xDFC) - goto exit_loop1; - } - } - exit_loop1: - loop1_outer_done = i; - loop1_inner_done = j; - if (j >= 8) { - b43_phy_write(dev, B43_PHY_RFOVERVAL, - b43_phy_read(dev, B43_PHY_RFOVERVAL) - | 0x30); - trsw_rx = 0x1B; - for (j = j - 8; j < 16; j++) { - b43_phy_write(dev, B43_PHY_RFOVERVAL, - (b43_phy_read(dev, B43_PHY_RFOVERVAL) - & 0xF0FF) | (j << 8)); - b43_phy_write(dev, B43_PHY_PGACTL, - (b43_phy_read(dev, B43_PHY_PGACTL) - & 0x0FFF) | 0xA000); - b43_phy_write(dev, B43_PHY_PGACTL, - b43_phy_read(dev, B43_PHY_PGACTL) - | 0xF000); - udelay(20); - trsw_rx -= 3; - if (b43_phy_read(dev, B43_PHY_LO_LEAKAGE) >= 0xDFC) - goto exit_loop2; - } - } else - trsw_rx = 0x18; - exit_loop2: - - if (phy->rev != 1) { /* Not in specs, but needed to prevent PPC machine check */ - b43_phy_write(dev, B43_PHY_ANALOGOVER, backup_phy[4]); - b43_phy_write(dev, B43_PHY_ANALOGOVERVAL, backup_phy[5]); - } - b43_phy_write(dev, B43_PHY_CCK(0x5A), backup_phy[6]); - b43_phy_write(dev, B43_PHY_CCK(0x59), backup_phy[7]); - b43_phy_write(dev, B43_PHY_CCK(0x58), backup_phy[8]); - b43_phy_write(dev, B43_PHY_CCK(0x0A), backup_phy[9]); - b43_phy_write(dev, B43_PHY_CCK(0x03), backup_phy[10]); - b43_phy_write(dev, B43_PHY_LO_MASK, backup_phy[11]); - b43_phy_write(dev, B43_PHY_LO_CTL, backup_phy[12]); - b43_phy_write(dev, B43_PHY_CCK(0x2B), backup_phy[13]); - b43_phy_write(dev, B43_PHY_PGACTL, backup_phy[14]); - - b43_phy_set_baseband_attenuation(dev, backup_bband); - - b43_radio_write16(dev, 0x52, backup_radio[0]); - b43_radio_write16(dev, 0x43, backup_radio[1]); - b43_radio_write16(dev, 0x7A, backup_radio[2]); - - b43_phy_write(dev, B43_PHY_RFOVER, backup_phy[2] | 0x0003); - udelay(10); - b43_phy_write(dev, B43_PHY_RFOVER, backup_phy[2]); - b43_phy_write(dev, B43_PHY_RFOVERVAL, backup_phy[3]); - b43_phy_write(dev, B43_PHY_CRS0, backup_phy[0]); - b43_phy_write(dev, B43_PHY_CCKBBANDCFG, backup_phy[1]); - - phy->max_lb_gain = - ((loop1_inner_done * 6) - (loop1_outer_done * 4)) - 11; - phy->trsw_rx_gain = trsw_rx * 2; -} - -static void b43_phy_initg(struct b43_wldev *dev) -{ - struct b43_phy *phy = &dev->phy; - u16 tmp; - - if (phy->rev == 1) - b43_phy_initb5(dev); - else - b43_phy_initb6(dev); - - if (phy->rev >= 2 || phy->gmode) - b43_phy_inita(dev); - - if (phy->rev >= 2) { - b43_phy_write(dev, B43_PHY_ANALOGOVER, 0); - b43_phy_write(dev, B43_PHY_ANALOGOVERVAL, 0); - } - if (phy->rev == 2) { - b43_phy_write(dev, B43_PHY_RFOVER, 0); - b43_phy_write(dev, B43_PHY_PGACTL, 0xC0); - } - if (phy->rev > 5) { - b43_phy_write(dev, B43_PHY_RFOVER, 0x400); - b43_phy_write(dev, B43_PHY_PGACTL, 0xC0); - } - if (phy->gmode || phy->rev >= 2) { - tmp = b43_phy_read(dev, B43_PHY_VERSION_OFDM); - tmp &= B43_PHYVER_VERSION; - if (tmp == 3 || tmp == 5) { - b43_phy_write(dev, B43_PHY_OFDM(0xC2), 0x1816); - b43_phy_write(dev, B43_PHY_OFDM(0xC3), 0x8006); - } - if (tmp == 5) { - b43_phy_write(dev, B43_PHY_OFDM(0xCC), - (b43_phy_read(dev, B43_PHY_OFDM(0xCC)) - & 0x00FF) | 0x1F00); - } - } - if ((phy->rev <= 2 && phy->gmode) || phy->rev >= 2) - b43_phy_write(dev, B43_PHY_OFDM(0x7E), 0x78); - if (phy->radio_rev == 8) { - b43_phy_write(dev, B43_PHY_EXTG(0x01), - b43_phy_read(dev, B43_PHY_EXTG(0x01)) - | 0x80); - b43_phy_write(dev, B43_PHY_OFDM(0x3E), - b43_phy_read(dev, B43_PHY_OFDM(0x3E)) - | 0x4); - } - if (has_loopback_gain(phy)) - b43_calc_loopback_gain(dev); - - if (phy->radio_rev != 8) { - if (phy->initval == 0xFFFF) - phy->initval = b43_radio_init2050(dev); - else - b43_radio_write16(dev, 0x0078, phy->initval); - } - b43_lo_g_init(dev); - if (has_tx_magnification(phy)) { - b43_radio_write16(dev, 0x52, - (b43_radio_read16(dev, 0x52) & 0xFF00) - | phy->lo_control->tx_bias | phy-> - lo_control->tx_magn); - } else { - b43_radio_write16(dev, 0x52, - (b43_radio_read16(dev, 0x52) & 0xFFF0) - | phy->lo_control->tx_bias); - } - if (phy->rev >= 6) { - b43_phy_write(dev, B43_PHY_CCK(0x36), - (b43_phy_read(dev, B43_PHY_CCK(0x36)) - & 0x0FFF) | (phy->lo_control-> - tx_bias << 12)); - } - if (dev->dev->bus->sprom.boardflags_lo & B43_BFL_PACTRL) - b43_phy_write(dev, B43_PHY_CCK(0x2E), 0x8075); - else - b43_phy_write(dev, B43_PHY_CCK(0x2E), 0x807F); - if (phy->rev < 2) - b43_phy_write(dev, B43_PHY_CCK(0x2F), 0x101); - else - b43_phy_write(dev, B43_PHY_CCK(0x2F), 0x202); - if (phy->gmode || phy->rev >= 2) { - b43_lo_g_adjust(dev); - b43_phy_write(dev, B43_PHY_LO_MASK, 0x8078); - } - - if (!(dev->dev->bus->sprom.boardflags_lo & B43_BFL_RSSI)) { - /* The specs state to update the NRSSI LT with - * the value 0x7FFFFFFF here. I think that is some weird - * compiler optimization in the original driver. - * Essentially, what we do here is resetting all NRSSI LT - * entries to -32 (see the clamp_val() in nrssi_hw_update()) - */ - b43_nrssi_hw_update(dev, 0xFFFF); //FIXME? - b43_calc_nrssi_threshold(dev); - } else if (phy->gmode || phy->rev >= 2) { - if (phy->nrssi[0] == -1000) { - B43_WARN_ON(phy->nrssi[1] != -1000); - b43_calc_nrssi_slope(dev); - } else - b43_calc_nrssi_threshold(dev); - } - if (phy->radio_rev == 8) - b43_phy_write(dev, B43_PHY_EXTG(0x05), 0x3230); - b43_phy_init_pctl(dev); - /* FIXME: The spec says in the following if, the 0 should be replaced - 'if OFDM may not be used in the current locale' - but OFDM is legal everywhere */ - if ((dev->dev->bus->chip_id == 0x4306 - && dev->dev->bus->chip_package == 2) || 0) { - b43_phy_write(dev, B43_PHY_CRS0, b43_phy_read(dev, B43_PHY_CRS0) - & 0xBFFF); - b43_phy_write(dev, B43_PHY_OFDM(0xC3), - b43_phy_read(dev, B43_PHY_OFDM(0xC3)) - & 0x7FFF); - } -} - -/* Set the baseband attenuation value on chip. */ -void b43_phy_set_baseband_attenuation(struct b43_wldev *dev, - u16 baseband_attenuation) -{ - struct b43_phy *phy = &dev->phy; - - if (phy->analog == 0) { - b43_write16(dev, B43_MMIO_PHY0, (b43_read16(dev, B43_MMIO_PHY0) - & 0xFFF0) | - baseband_attenuation); - } else if (phy->analog > 1) { - b43_phy_write(dev, B43_PHY_DACCTL, - (b43_phy_read(dev, B43_PHY_DACCTL) - & 0xFFC3) | (baseband_attenuation << 2)); - } else { - b43_phy_write(dev, B43_PHY_DACCTL, - (b43_phy_read(dev, B43_PHY_DACCTL) - & 0xFF87) | (baseband_attenuation << 3)); - } -} - -/* http://bcm-specs.sipsolutions.net/EstimatePowerOut - * This function converts a TSSI value to dBm in Q5.2 - */ -static s8 b43_phy_estimate_power_out(struct b43_wldev *dev, s8 tssi) -{ - struct b43_phy *phy = &dev->phy; - s8 dbm = 0; - s32 tmp; - - tmp = (phy->tgt_idle_tssi - phy->cur_idle_tssi + tssi); - - switch (phy->type) { - case B43_PHYTYPE_A: - tmp += 0x80; - tmp = clamp_val(tmp, 0x00, 0xFF); - dbm = phy->tssi2dbm[tmp]; - //TODO: There's a FIXME on the specs - break; - case B43_PHYTYPE_B: - case B43_PHYTYPE_G: - tmp = clamp_val(tmp, 0x00, 0x3F); - dbm = phy->tssi2dbm[tmp]; - break; - default: - B43_WARN_ON(1); - } - - return dbm; -} - -void b43_put_attenuation_into_ranges(struct b43_wldev *dev, - int *_bbatt, int *_rfatt) -{ - int rfatt = *_rfatt; - int bbatt = *_bbatt; - struct b43_txpower_lo_control *lo = dev->phy.lo_control; - - /* Get baseband and radio attenuation values into their permitted ranges. - * Radio attenuation affects power level 4 times as much as baseband. */ - - /* Range constants */ - const int rf_min = lo->rfatt_list.min_val; - const int rf_max = lo->rfatt_list.max_val; - const int bb_min = lo->bbatt_list.min_val; - const int bb_max = lo->bbatt_list.max_val; - - while (1) { - if (rfatt > rf_max && bbatt > bb_max - 4) - break; /* Can not get it into ranges */ - if (rfatt < rf_min && bbatt < bb_min + 4) - break; /* Can not get it into ranges */ - if (bbatt > bb_max && rfatt > rf_max - 1) - break; /* Can not get it into ranges */ - if (bbatt < bb_min && rfatt < rf_min + 1) - break; /* Can not get it into ranges */ - - if (bbatt > bb_max) { - bbatt -= 4; - rfatt += 1; - continue; - } - if (bbatt < bb_min) { - bbatt += 4; - rfatt -= 1; - continue; - } - if (rfatt > rf_max) { - rfatt -= 1; - bbatt += 4; - continue; - } - if (rfatt < rf_min) { - rfatt += 1; - bbatt -= 4; - continue; - } - break; - } - - *_rfatt = clamp_val(rfatt, rf_min, rf_max); - *_bbatt = clamp_val(bbatt, bb_min, bb_max); -} - -/* http://bcm-specs.sipsolutions.net/RecalculateTransmissionPower */ -void b43_phy_xmitpower(struct b43_wldev *dev) -{ - struct ssb_bus *bus = dev->dev->bus; - struct b43_phy *phy = &dev->phy; - - if (phy->cur_idle_tssi == 0) - return; - if ((bus->boardinfo.vendor == SSB_BOARDVENDOR_BCM) && - (bus->boardinfo.type == SSB_BOARD_BU4306)) - return; -#ifdef CONFIG_B43_DEBUG - if (phy->manual_txpower_control) - return; -#endif - - switch (phy->type) { - case B43_PHYTYPE_A:{ - - //TODO: Nothing for A PHYs yet :-/ - - break; - } - case B43_PHYTYPE_B: - case B43_PHYTYPE_G:{ - u16 tmp; - s8 v0, v1, v2, v3; - s8 average; - int max_pwr; - int desired_pwr, estimated_pwr, pwr_adjust; - int rfatt_delta, bbatt_delta; - int rfatt, bbatt; - u8 tx_control; - - tmp = b43_shm_read16(dev, B43_SHM_SHARED, 0x0058); - v0 = (s8) (tmp & 0x00FF); - v1 = (s8) ((tmp & 0xFF00) >> 8); - tmp = b43_shm_read16(dev, B43_SHM_SHARED, 0x005A); - v2 = (s8) (tmp & 0x00FF); - v3 = (s8) ((tmp & 0xFF00) >> 8); - tmp = 0; - - if (v0 == 0x7F || v1 == 0x7F || v2 == 0x7F - || v3 == 0x7F) { - tmp = - b43_shm_read16(dev, B43_SHM_SHARED, 0x0070); - v0 = (s8) (tmp & 0x00FF); - v1 = (s8) ((tmp & 0xFF00) >> 8); - tmp = - b43_shm_read16(dev, B43_SHM_SHARED, 0x0072); - v2 = (s8) (tmp & 0x00FF); - v3 = (s8) ((tmp & 0xFF00) >> 8); - if (v0 == 0x7F || v1 == 0x7F || v2 == 0x7F - || v3 == 0x7F) - return; - v0 = (v0 + 0x20) & 0x3F; - v1 = (v1 + 0x20) & 0x3F; - v2 = (v2 + 0x20) & 0x3F; - v3 = (v3 + 0x20) & 0x3F; - tmp = 1; - } - b43_shm_clear_tssi(dev); - - average = (v0 + v1 + v2 + v3 + 2) / 4; - - if (tmp - && (b43_shm_read16(dev, B43_SHM_SHARED, 0x005E) & - 0x8)) - average -= 13; - - estimated_pwr = - b43_phy_estimate_power_out(dev, average); - - max_pwr = dev->dev->bus->sprom.maxpwr_bg; - if ((dev->dev->bus->sprom.boardflags_lo - & B43_BFL_PACTRL) && (phy->type == B43_PHYTYPE_G)) - max_pwr -= 0x3; - if (unlikely(max_pwr <= 0)) { - b43warn(dev->wl, - "Invalid max-TX-power value in SPROM.\n"); - max_pwr = 60; /* fake it */ - dev->dev->bus->sprom.maxpwr_bg = max_pwr; - } - - /*TODO: - max_pwr = min(REG - dev->dev->bus->sprom.antennagain_bgphy - 0x6, max_pwr) - where REG is the max power as per the regulatory domain - */ - - /* Get desired power (in Q5.2) */ - desired_pwr = INT_TO_Q52(phy->power_level); - /* And limit it. max_pwr already is Q5.2 */ - desired_pwr = clamp_val(desired_pwr, 0, max_pwr); - if (b43_debug(dev, B43_DBG_XMITPOWER)) { - b43dbg(dev->wl, - "Current TX power output: " Q52_FMT - " dBm, " "Desired TX power output: " - Q52_FMT " dBm\n", Q52_ARG(estimated_pwr), - Q52_ARG(desired_pwr)); - } - - /* Calculate the adjustment delta. */ - pwr_adjust = desired_pwr - estimated_pwr; - - /* RF attenuation delta. */ - rfatt_delta = ((pwr_adjust + 7) / 8); - /* Lower attenuation => Bigger power output. Negate it. */ - rfatt_delta = -rfatt_delta; - - /* Baseband attenuation delta. */ - bbatt_delta = pwr_adjust / 2; - /* Lower attenuation => Bigger power output. Negate it. */ - bbatt_delta = -bbatt_delta; - /* RF att affects power level 4 times as much as - * Baseband attennuation. Subtract it. */ - bbatt_delta -= 4 * rfatt_delta; - - /* So do we finally need to adjust something? */ - if ((rfatt_delta == 0) && (bbatt_delta == 0)) - return; - - /* Calculate the new attenuation values. */ - bbatt = phy->bbatt.att; - bbatt += bbatt_delta; - rfatt = phy->rfatt.att; - rfatt += rfatt_delta; - - b43_put_attenuation_into_ranges(dev, &bbatt, &rfatt); - tx_control = phy->tx_control; - if ((phy->radio_ver == 0x2050) && (phy->radio_rev == 2)) { - if (rfatt <= 1) { - if (tx_control == 0) { - tx_control = - B43_TXCTL_PA2DB | - B43_TXCTL_TXMIX; - rfatt += 2; - bbatt += 2; - } else if (dev->dev->bus->sprom. - boardflags_lo & - B43_BFL_PACTRL) { - bbatt += 4 * (rfatt - 2); - rfatt = 2; - } - } else if (rfatt > 4 && tx_control) { - tx_control = 0; - if (bbatt < 3) { - rfatt -= 3; - bbatt += 2; - } else { - rfatt -= 2; - bbatt -= 2; - } - } - } - /* Save the control values */ - phy->tx_control = tx_control; - b43_put_attenuation_into_ranges(dev, &bbatt, &rfatt); - phy->rfatt.att = rfatt; - phy->bbatt.att = bbatt; - - /* Adjust the hardware */ - b43_phy_lock(dev); - b43_radio_lock(dev); - b43_set_txpower_g(dev, &phy->bbatt, &phy->rfatt, - phy->tx_control); - b43_radio_unlock(dev); - b43_phy_unlock(dev); - break; - } - case B43_PHYTYPE_N: - b43_nphy_xmitpower(dev); - break; - default: - B43_WARN_ON(1); - } -} - -static inline s32 b43_tssi2dbm_ad(s32 num, s32 den) -{ - if (num < 0) - return num / den; - else - return (num + den / 2) / den; -} - -static inline - s8 b43_tssi2dbm_entry(s8 entry[], u8 index, s16 pab0, s16 pab1, s16 pab2) -{ - s32 m1, m2, f = 256, q, delta; - s8 i = 0; - - m1 = b43_tssi2dbm_ad(16 * pab0 + index * pab1, 32); - m2 = max(b43_tssi2dbm_ad(32768 + index * pab2, 256), 1); - do { - if (i > 15) - return -EINVAL; - q = b43_tssi2dbm_ad(f * 4096 - - b43_tssi2dbm_ad(m2 * f, 16) * f, 2048); - delta = abs(q - f); - f = q; - i++; - } while (delta >= 2); - entry[index] = clamp_val(b43_tssi2dbm_ad(m1 * f, 8192), -127, 128); - return 0; -} - -/* http://bcm-specs.sipsolutions.net/TSSI_to_DBM_Table */ -int b43_phy_init_tssi2dbm_table(struct b43_wldev *dev) -{ - struct b43_phy *phy = &dev->phy; - s16 pab0, pab1, pab2; - u8 idx; - s8 *dyn_tssi2dbm; - - if (phy->type == B43_PHYTYPE_A) { - pab0 = (s16) (dev->dev->bus->sprom.pa1b0); - pab1 = (s16) (dev->dev->bus->sprom.pa1b1); - pab2 = (s16) (dev->dev->bus->sprom.pa1b2); - } else { - pab0 = (s16) (dev->dev->bus->sprom.pa0b0); - pab1 = (s16) (dev->dev->bus->sprom.pa0b1); - pab2 = (s16) (dev->dev->bus->sprom.pa0b2); - } - - if ((dev->dev->bus->chip_id == 0x4301) && (phy->radio_ver != 0x2050)) { - phy->tgt_idle_tssi = 0x34; - phy->tssi2dbm = b43_tssi2dbm_b_table; - return 0; - } - - if (pab0 != 0 && pab1 != 0 && pab2 != 0 && - pab0 != -1 && pab1 != -1 && pab2 != -1) { - /* The pabX values are set in SPROM. Use them. */ - if (phy->type == B43_PHYTYPE_A) { - if ((s8) dev->dev->bus->sprom.itssi_a != 0 && - (s8) dev->dev->bus->sprom.itssi_a != -1) - phy->tgt_idle_tssi = - (s8) (dev->dev->bus->sprom.itssi_a); - else - phy->tgt_idle_tssi = 62; - } else { - if ((s8) dev->dev->bus->sprom.itssi_bg != 0 && - (s8) dev->dev->bus->sprom.itssi_bg != -1) - phy->tgt_idle_tssi = - (s8) (dev->dev->bus->sprom.itssi_bg); - else - phy->tgt_idle_tssi = 62; - } - dyn_tssi2dbm = kmalloc(64, GFP_KERNEL); - if (dyn_tssi2dbm == NULL) { - b43err(dev->wl, "Could not allocate memory " - "for tssi2dbm table\n"); - return -ENOMEM; - } - for (idx = 0; idx < 64; idx++) - if (b43_tssi2dbm_entry - (dyn_tssi2dbm, idx, pab0, pab1, pab2)) { - phy->tssi2dbm = NULL; - b43err(dev->wl, "Could not generate " - "tssi2dBm table\n"); - kfree(dyn_tssi2dbm); - return -ENODEV; - } - phy->tssi2dbm = dyn_tssi2dbm; - phy->dyn_tssi_tbl = 1; - } else { - /* pabX values not set in SPROM. */ - switch (phy->type) { - case B43_PHYTYPE_A: - /* APHY needs a generated table. */ - phy->tssi2dbm = NULL; - b43err(dev->wl, "Could not generate tssi2dBm " - "table (wrong SPROM info)!\n"); - return -ENODEV; - case B43_PHYTYPE_B: - phy->tgt_idle_tssi = 0x34; - phy->tssi2dbm = b43_tssi2dbm_b_table; - break; - case B43_PHYTYPE_G: - phy->tgt_idle_tssi = 0x34; - phy->tssi2dbm = b43_tssi2dbm_g_table; - break; - } - } - - return 0; -} - -int b43_phy_init(struct b43_wldev *dev) -{ - struct b43_phy *phy = &dev->phy; - bool unsupported = 0; - int err = 0; - - switch (phy->type) { - case B43_PHYTYPE_A: - if (phy->rev == 2 || phy->rev == 3) - b43_phy_inita(dev); - else - unsupported = 1; - break; - case B43_PHYTYPE_G: - b43_phy_initg(dev); - break; - case B43_PHYTYPE_N: - err = b43_phy_initn(dev); - break; - default: - unsupported = 1; - } - if (unsupported) - b43err(dev->wl, "Unknown PHYTYPE found\n"); - - return err; -} - -void b43_set_rx_antenna(struct b43_wldev *dev, int antenna) -{ - struct b43_phy *phy = &dev->phy; - u64 hf; - u16 tmp; - int autodiv = 0; - - if (antenna == B43_ANTENNA_AUTO0 || antenna == B43_ANTENNA_AUTO1) - autodiv = 1; - - hf = b43_hf_read(dev); - hf &= ~B43_HF_ANTDIVHELP; - b43_hf_write(dev, hf); - - switch (phy->type) { - case B43_PHYTYPE_A: - case B43_PHYTYPE_G: - tmp = b43_phy_read(dev, B43_PHY_BBANDCFG); - tmp &= ~B43_PHY_BBANDCFG_RXANT; - tmp |= (autodiv ? B43_ANTENNA_AUTO0 : antenna) - << B43_PHY_BBANDCFG_RXANT_SHIFT; - b43_phy_write(dev, B43_PHY_BBANDCFG, tmp); - - if (autodiv) { - tmp = b43_phy_read(dev, B43_PHY_ANTDWELL); - if (antenna == B43_ANTENNA_AUTO0) - tmp &= ~B43_PHY_ANTDWELL_AUTODIV1; - else - tmp |= B43_PHY_ANTDWELL_AUTODIV1; - b43_phy_write(dev, B43_PHY_ANTDWELL, tmp); - } - if (phy->type == B43_PHYTYPE_G) { - tmp = b43_phy_read(dev, B43_PHY_ANTWRSETT); - if (autodiv) - tmp |= B43_PHY_ANTWRSETT_ARXDIV; - else - tmp &= ~B43_PHY_ANTWRSETT_ARXDIV; - b43_phy_write(dev, B43_PHY_ANTWRSETT, tmp); - if (phy->rev >= 2) { - tmp = b43_phy_read(dev, B43_PHY_OFDM61); - tmp |= B43_PHY_OFDM61_10; - b43_phy_write(dev, B43_PHY_OFDM61, tmp); - - tmp = - b43_phy_read(dev, B43_PHY_DIVSRCHGAINBACK); - tmp = (tmp & 0xFF00) | 0x15; - b43_phy_write(dev, B43_PHY_DIVSRCHGAINBACK, - tmp); - - if (phy->rev == 2) { - b43_phy_write(dev, B43_PHY_ADIVRELATED, - 8); - } else { - tmp = - b43_phy_read(dev, - B43_PHY_ADIVRELATED); - tmp = (tmp & 0xFF00) | 8; - b43_phy_write(dev, B43_PHY_ADIVRELATED, - tmp); - } - } - if (phy->rev >= 6) - b43_phy_write(dev, B43_PHY_OFDM9B, 0xDC); - } else { - if (phy->rev < 3) { - tmp = b43_phy_read(dev, B43_PHY_ANTDWELL); - tmp = (tmp & 0xFF00) | 0x24; - b43_phy_write(dev, B43_PHY_ANTDWELL, tmp); - } else { - tmp = b43_phy_read(dev, B43_PHY_OFDM61); - tmp |= 0x10; - b43_phy_write(dev, B43_PHY_OFDM61, tmp); - if (phy->analog == 3) { - b43_phy_write(dev, B43_PHY_CLIPPWRDOWNT, - 0x1D); - b43_phy_write(dev, B43_PHY_ADIVRELATED, - 8); - } else { - b43_phy_write(dev, B43_PHY_CLIPPWRDOWNT, - 0x3A); - tmp = - b43_phy_read(dev, - B43_PHY_ADIVRELATED); - tmp = (tmp & 0xFF00) | 8; - b43_phy_write(dev, B43_PHY_ADIVRELATED, - tmp); - } - } - } - break; - case B43_PHYTYPE_B: - tmp = b43_phy_read(dev, B43_PHY_CCKBBANDCFG); - tmp &= ~B43_PHY_BBANDCFG_RXANT; - tmp |= (autodiv ? B43_ANTENNA_AUTO0 : antenna) - << B43_PHY_BBANDCFG_RXANT_SHIFT; - b43_phy_write(dev, B43_PHY_CCKBBANDCFG, tmp); - break; - case B43_PHYTYPE_N: - b43_nphy_set_rxantenna(dev, antenna); - break; - default: - B43_WARN_ON(1); - } - - hf |= B43_HF_ANTDIVHELP; - b43_hf_write(dev, hf); -} - -/* Get the freq, as it has to be written to the device. */ -static inline u16 channel2freq_bg(u8 channel) -{ - B43_WARN_ON(!(channel >= 1 && channel <= 14)); - - return b43_radio_channel_codes_bg[channel - 1]; -} - -/* Get the freq, as it has to be written to the device. */ -static inline u16 channel2freq_a(u8 channel) -{ - B43_WARN_ON(channel > 200); - - return (5000 + 5 * channel); -} - -void b43_radio_lock(struct b43_wldev *dev) -{ - u32 macctl; - - macctl = b43_read32(dev, B43_MMIO_MACCTL); - B43_WARN_ON(macctl & B43_MACCTL_RADIOLOCK); - macctl |= B43_MACCTL_RADIOLOCK; - b43_write32(dev, B43_MMIO_MACCTL, macctl); - /* Commit the write and wait for the device - * to exit any radio register access. */ - b43_read32(dev, B43_MMIO_MACCTL); - udelay(10); -} - -void b43_radio_unlock(struct b43_wldev *dev) -{ - u32 macctl; - - /* Commit any write */ - b43_read16(dev, B43_MMIO_PHY_VER); - /* unlock */ - macctl = b43_read32(dev, B43_MMIO_MACCTL); - B43_WARN_ON(!(macctl & B43_MACCTL_RADIOLOCK)); - macctl &= ~B43_MACCTL_RADIOLOCK; - b43_write32(dev, B43_MMIO_MACCTL, macctl); -} - -u16 b43_radio_read16(struct b43_wldev *dev, u16 offset) -{ - struct b43_phy *phy = &dev->phy; - - /* Offset 1 is a 32-bit register. */ - B43_WARN_ON(offset == 1); - - switch (phy->type) { - case B43_PHYTYPE_A: - offset |= 0x40; - break; - case B43_PHYTYPE_B: - if (phy->radio_ver == 0x2053) { - if (offset < 0x70) - offset += 0x80; - else if (offset < 0x80) - offset += 0x70; - } else if (phy->radio_ver == 0x2050) { - offset |= 0x80; - } else - B43_WARN_ON(1); - break; - case B43_PHYTYPE_G: - offset |= 0x80; - break; - case B43_PHYTYPE_N: - offset |= 0x100; - break; - case B43_PHYTYPE_LP: - /* No adjustment required. */ - break; - default: - B43_WARN_ON(1); - } - - b43_write16(dev, B43_MMIO_RADIO_CONTROL, offset); - return b43_read16(dev, B43_MMIO_RADIO_DATA_LOW); -} - -void b43_radio_write16(struct b43_wldev *dev, u16 offset, u16 val) -{ - /* Offset 1 is a 32-bit register. */ - B43_WARN_ON(offset == 1); - - b43_write16(dev, B43_MMIO_RADIO_CONTROL, offset); - b43_write16(dev, B43_MMIO_RADIO_DATA_LOW, val); -} - -void b43_radio_mask(struct b43_wldev *dev, u16 offset, u16 mask) -{ - b43_radio_write16(dev, offset, - b43_radio_read16(dev, offset) & mask); -} - -void b43_radio_set(struct b43_wldev *dev, u16 offset, u16 set) -{ - b43_radio_write16(dev, offset, - b43_radio_read16(dev, offset) | set); -} - -void b43_radio_maskset(struct b43_wldev *dev, u16 offset, u16 mask, u16 set) -{ - b43_radio_write16(dev, offset, - (b43_radio_read16(dev, offset) & mask) | set); -} - static void b43_set_all_gains(struct b43_wldev *dev, s16 first, s16 second, s16 third) { @@ -2134,103 +382,6 @@ static void b43_set_original_gains(struct b43_wldev *dev) b43_dummy_transmission(dev); } -/* Synthetic PU workaround */ -static void b43_synth_pu_workaround(struct b43_wldev *dev, u8 channel) -{ - struct b43_phy *phy = &dev->phy; - - might_sleep(); - - if (phy->radio_ver != 0x2050 || phy->radio_rev >= 6) { - /* We do not need the workaround. */ - return; - } - - if (channel <= 10) { - b43_write16(dev, B43_MMIO_CHANNEL, - channel2freq_bg(channel + 4)); - } else { - b43_write16(dev, B43_MMIO_CHANNEL, channel2freq_bg(1)); - } - msleep(1); - b43_write16(dev, B43_MMIO_CHANNEL, channel2freq_bg(channel)); -} - -u8 b43_radio_aci_detect(struct b43_wldev *dev, u8 channel) -{ - struct b43_phy *phy = &dev->phy; - u8 ret = 0; - u16 saved, rssi, temp; - int i, j = 0; - - saved = b43_phy_read(dev, 0x0403); - b43_radio_selectchannel(dev, channel, 0); - b43_phy_write(dev, 0x0403, (saved & 0xFFF8) | 5); - if (phy->aci_hw_rssi) - rssi = b43_phy_read(dev, 0x048A) & 0x3F; - else - rssi = saved & 0x3F; - /* clamp temp to signed 5bit */ - if (rssi > 32) - rssi -= 64; - for (i = 0; i < 100; i++) { - temp = (b43_phy_read(dev, 0x047F) >> 8) & 0x3F; - if (temp > 32) - temp -= 64; - if (temp < rssi) - j++; - if (j >= 20) - ret = 1; - } - b43_phy_write(dev, 0x0403, saved); - - return ret; -} - -u8 b43_radio_aci_scan(struct b43_wldev * dev) -{ - struct b43_phy *phy = &dev->phy; - u8 ret[13]; - unsigned int channel = phy->channel; - unsigned int i, j, start, end; - - if (!((phy->type == B43_PHYTYPE_G) && (phy->rev > 0))) - return 0; - - b43_phy_lock(dev); - b43_radio_lock(dev); - b43_phy_write(dev, 0x0802, b43_phy_read(dev, 0x0802) & 0xFFFC); - b43_phy_write(dev, B43_PHY_G_CRS, - b43_phy_read(dev, B43_PHY_G_CRS) & 0x7FFF); - b43_set_all_gains(dev, 3, 8, 1); - - start = (channel - 5 > 0) ? channel - 5 : 1; - end = (channel + 5 < 14) ? channel + 5 : 13; - - for (i = start; i <= end; i++) { - if (abs(channel - i) > 2) - ret[i - 1] = b43_radio_aci_detect(dev, i); - } - b43_radio_selectchannel(dev, channel, 0); - b43_phy_write(dev, 0x0802, - (b43_phy_read(dev, 0x0802) & 0xFFFC) | 0x0003); - b43_phy_write(dev, 0x0403, b43_phy_read(dev, 0x0403) & 0xFFF8); - b43_phy_write(dev, B43_PHY_G_CRS, - b43_phy_read(dev, B43_PHY_G_CRS) | 0x8000); - b43_set_original_gains(dev); - for (i = 0; i < 13; i++) { - if (!ret[i]) - continue; - end = (i + 5 < 13) ? i + 5 : 13; - for (j = i; j < end; j++) - ret[j] = 1; - } - b43_radio_unlock(dev); - b43_phy_unlock(dev); - - return ret[channel - 1]; -} - /* http://bcm-specs.sipsolutions.net/NRSSILookupTable */ void b43_nrssi_hw_write(struct b43_wldev *dev, u16 offset, s16 val) { @@ -2267,17 +418,17 @@ void b43_nrssi_hw_update(struct b43_wldev *dev, u16 val) /* http://bcm-specs.sipsolutions.net/NRSSILookupTable */ void b43_nrssi_mem_update(struct b43_wldev *dev) { - struct b43_phy *phy = &dev->phy; + struct b43_phy_g *gphy = dev->phy.g; s16 i, delta; s32 tmp; - delta = 0x1F - phy->nrssi[0]; + delta = 0x1F - gphy->nrssi[0]; for (i = 0; i < 64; i++) { - tmp = (i - delta) * phy->nrssislope; + tmp = (i - delta) * gphy->nrssislope; tmp /= 0x10000; tmp += 0x3A; tmp = clamp_val(tmp, 0, 0x3F); - phy->nrssi_lt[i] = tmp; + gphy->nrssi_lt[i] = tmp; } } @@ -2442,347 +593,230 @@ static void b43_calc_nrssi_offset(struct b43_wldev *dev) void b43_calc_nrssi_slope(struct b43_wldev *dev) { struct b43_phy *phy = &dev->phy; + struct b43_phy_g *gphy = phy->g; u16 backup[18] = { 0 }; u16 tmp; s16 nrssi0, nrssi1; - switch (phy->type) { - case B43_PHYTYPE_B: - backup[0] = b43_radio_read16(dev, 0x007A); - backup[1] = b43_radio_read16(dev, 0x0052); - backup[2] = b43_radio_read16(dev, 0x0043); - backup[3] = b43_phy_read(dev, 0x0030); - backup[4] = b43_phy_read(dev, 0x0026); - backup[5] = b43_phy_read(dev, 0x0015); - backup[6] = b43_phy_read(dev, 0x002A); - backup[7] = b43_phy_read(dev, 0x0020); - backup[8] = b43_phy_read(dev, 0x005A); - backup[9] = b43_phy_read(dev, 0x0059); - backup[10] = b43_phy_read(dev, 0x0058); - backup[11] = b43_read16(dev, 0x03E2); - backup[12] = b43_read16(dev, 0x03E6); - backup[13] = b43_read16(dev, B43_MMIO_CHANNEL_EXT); - - tmp = b43_radio_read16(dev, 0x007A); - tmp &= (phy->rev >= 5) ? 0x007F : 0x000F; - b43_radio_write16(dev, 0x007A, tmp); - b43_phy_write(dev, 0x0030, 0x00FF); - b43_write16(dev, 0x03EC, 0x7F7F); - b43_phy_write(dev, 0x0026, 0x0000); - b43_phy_write(dev, 0x0015, b43_phy_read(dev, 0x0015) | 0x0020); - b43_phy_write(dev, 0x002A, 0x08A3); - b43_radio_write16(dev, 0x007A, - b43_radio_read16(dev, 0x007A) | 0x0080); + B43_WARN_ON(phy->type != B43_PHYTYPE_G); - nrssi0 = (s16) b43_phy_read(dev, 0x0027); - b43_radio_write16(dev, 0x007A, - b43_radio_read16(dev, 0x007A) & 0x007F); - if (phy->rev >= 2) { - b43_write16(dev, 0x03E6, 0x0040); - } else if (phy->rev == 0) { - b43_write16(dev, 0x03E6, 0x0122); - } else { - b43_write16(dev, B43_MMIO_CHANNEL_EXT, - b43_read16(dev, - B43_MMIO_CHANNEL_EXT) & 0x2000); - } - b43_phy_write(dev, 0x0020, 0x3F3F); - b43_phy_write(dev, 0x0015, 0xF330); - b43_radio_write16(dev, 0x005A, 0x0060); - b43_radio_write16(dev, 0x0043, - b43_radio_read16(dev, 0x0043) & 0x00F0); - b43_phy_write(dev, 0x005A, 0x0480); - b43_phy_write(dev, 0x0059, 0x0810); - b43_phy_write(dev, 0x0058, 0x000D); - udelay(20); - - nrssi1 = (s16) b43_phy_read(dev, 0x0027); - b43_phy_write(dev, 0x0030, backup[3]); - b43_radio_write16(dev, 0x007A, backup[0]); - b43_write16(dev, 0x03E2, backup[11]); - b43_phy_write(dev, 0x0026, backup[4]); - b43_phy_write(dev, 0x0015, backup[5]); - b43_phy_write(dev, 0x002A, backup[6]); - b43_synth_pu_workaround(dev, phy->channel); - if (phy->rev != 0) - b43_write16(dev, 0x03F4, backup[13]); - - b43_phy_write(dev, 0x0020, backup[7]); - b43_phy_write(dev, 0x005A, backup[8]); - b43_phy_write(dev, 0x0059, backup[9]); - b43_phy_write(dev, 0x0058, backup[10]); - b43_radio_write16(dev, 0x0052, backup[1]); - b43_radio_write16(dev, 0x0043, backup[2]); - - if (nrssi0 == nrssi1) - phy->nrssislope = 0x00010000; - else - phy->nrssislope = 0x00400000 / (nrssi0 - nrssi1); - - if (nrssi0 <= -4) { - phy->nrssi[0] = nrssi0; - phy->nrssi[1] = nrssi1; - } - break; - case B43_PHYTYPE_G: - if (phy->radio_rev >= 9) - return; - if (phy->radio_rev == 8) - b43_calc_nrssi_offset(dev); + if (phy->radio_rev >= 9) + return; + if (phy->radio_rev == 8) + b43_calc_nrssi_offset(dev); - b43_phy_write(dev, B43_PHY_G_CRS, - b43_phy_read(dev, B43_PHY_G_CRS) & 0x7FFF); - b43_phy_write(dev, 0x0802, b43_phy_read(dev, 0x0802) & 0xFFFC); - backup[7] = b43_read16(dev, 0x03E2); - b43_write16(dev, 0x03E2, b43_read16(dev, 0x03E2) | 0x8000); - backup[0] = b43_radio_read16(dev, 0x007A); - backup[1] = b43_radio_read16(dev, 0x0052); - backup[2] = b43_radio_read16(dev, 0x0043); - backup[3] = b43_phy_read(dev, 0x0015); - backup[4] = b43_phy_read(dev, 0x005A); - backup[5] = b43_phy_read(dev, 0x0059); - backup[6] = b43_phy_read(dev, 0x0058); - backup[8] = b43_read16(dev, 0x03E6); - backup[9] = b43_read16(dev, B43_MMIO_CHANNEL_EXT); - if (phy->rev >= 3) { - backup[10] = b43_phy_read(dev, 0x002E); - backup[11] = b43_phy_read(dev, 0x002F); - backup[12] = b43_phy_read(dev, 0x080F); - backup[13] = b43_phy_read(dev, B43_PHY_G_LO_CONTROL); - backup[14] = b43_phy_read(dev, 0x0801); - backup[15] = b43_phy_read(dev, 0x0060); - backup[16] = b43_phy_read(dev, 0x0014); - backup[17] = b43_phy_read(dev, 0x0478); - b43_phy_write(dev, 0x002E, 0); - b43_phy_write(dev, B43_PHY_G_LO_CONTROL, 0); - switch (phy->rev) { - case 4: - case 6: - case 7: - b43_phy_write(dev, 0x0478, - b43_phy_read(dev, 0x0478) - | 0x0100); - b43_phy_write(dev, 0x0801, - b43_phy_read(dev, 0x0801) - | 0x0040); - break; - case 3: - case 5: - b43_phy_write(dev, 0x0801, - b43_phy_read(dev, 0x0801) - & 0xFFBF); - break; - } - b43_phy_write(dev, 0x0060, b43_phy_read(dev, 0x0060) + b43_phy_write(dev, B43_PHY_G_CRS, + b43_phy_read(dev, B43_PHY_G_CRS) & 0x7FFF); + b43_phy_write(dev, 0x0802, b43_phy_read(dev, 0x0802) & 0xFFFC); + backup[7] = b43_read16(dev, 0x03E2); + b43_write16(dev, 0x03E2, b43_read16(dev, 0x03E2) | 0x8000); + backup[0] = b43_radio_read16(dev, 0x007A); + backup[1] = b43_radio_read16(dev, 0x0052); + backup[2] = b43_radio_read16(dev, 0x0043); + backup[3] = b43_phy_read(dev, 0x0015); + backup[4] = b43_phy_read(dev, 0x005A); + backup[5] = b43_phy_read(dev, 0x0059); + backup[6] = b43_phy_read(dev, 0x0058); + backup[8] = b43_read16(dev, 0x03E6); + backup[9] = b43_read16(dev, B43_MMIO_CHANNEL_EXT); + if (phy->rev >= 3) { + backup[10] = b43_phy_read(dev, 0x002E); + backup[11] = b43_phy_read(dev, 0x002F); + backup[12] = b43_phy_read(dev, 0x080F); + backup[13] = b43_phy_read(dev, B43_PHY_G_LO_CONTROL); + backup[14] = b43_phy_read(dev, 0x0801); + backup[15] = b43_phy_read(dev, 0x0060); + backup[16] = b43_phy_read(dev, 0x0014); + backup[17] = b43_phy_read(dev, 0x0478); + b43_phy_write(dev, 0x002E, 0); + b43_phy_write(dev, B43_PHY_G_LO_CONTROL, 0); + switch (phy->rev) { + case 4: + case 6: + case 7: + b43_phy_write(dev, 0x0478, + b43_phy_read(dev, 0x0478) + | 0x0100); + b43_phy_write(dev, 0x0801, + b43_phy_read(dev, 0x0801) | 0x0040); - b43_phy_write(dev, 0x0014, b43_phy_read(dev, 0x0014) - | 0x0200); - } - b43_radio_write16(dev, 0x007A, - b43_radio_read16(dev, 0x007A) | 0x0070); - b43_set_all_gains(dev, 0, 8, 0); - b43_radio_write16(dev, 0x007A, - b43_radio_read16(dev, 0x007A) & 0x00F7); - if (phy->rev >= 2) { - b43_phy_write(dev, 0x0811, - (b43_phy_read(dev, 0x0811) & 0xFFCF) | - 0x0030); - b43_phy_write(dev, 0x0812, - (b43_phy_read(dev, 0x0812) & 0xFFCF) | - 0x0010); + break; + case 3: + case 5: + b43_phy_write(dev, 0x0801, + b43_phy_read(dev, 0x0801) + & 0xFFBF); + break; } - b43_radio_write16(dev, 0x007A, - b43_radio_read16(dev, 0x007A) | 0x0080); - udelay(20); + b43_phy_write(dev, 0x0060, b43_phy_read(dev, 0x0060) + | 0x0040); + b43_phy_write(dev, 0x0014, b43_phy_read(dev, 0x0014) + | 0x0200); + } + b43_radio_write16(dev, 0x007A, + b43_radio_read16(dev, 0x007A) | 0x0070); + b43_set_all_gains(dev, 0, 8, 0); + b43_radio_write16(dev, 0x007A, + b43_radio_read16(dev, 0x007A) & 0x00F7); + if (phy->rev >= 2) { + b43_phy_write(dev, 0x0811, + (b43_phy_read(dev, 0x0811) & 0xFFCF) | + 0x0030); + b43_phy_write(dev, 0x0812, + (b43_phy_read(dev, 0x0812) & 0xFFCF) | + 0x0010); + } + b43_radio_write16(dev, 0x007A, + b43_radio_read16(dev, 0x007A) | 0x0080); + udelay(20); - nrssi0 = (s16) ((b43_phy_read(dev, 0x047F) >> 8) & 0x003F); - if (nrssi0 >= 0x0020) - nrssi0 -= 0x0040; + nrssi0 = (s16) ((b43_phy_read(dev, 0x047F) >> 8) & 0x003F); + if (nrssi0 >= 0x0020) + nrssi0 -= 0x0040; - b43_radio_write16(dev, 0x007A, - b43_radio_read16(dev, 0x007A) & 0x007F); - if (phy->rev >= 2) { - b43_phy_write(dev, 0x0003, (b43_phy_read(dev, 0x0003) - & 0xFF9F) | 0x0040); - } - - b43_write16(dev, B43_MMIO_CHANNEL_EXT, - b43_read16(dev, B43_MMIO_CHANNEL_EXT) - | 0x2000); - b43_radio_write16(dev, 0x007A, - b43_radio_read16(dev, 0x007A) | 0x000F); - b43_phy_write(dev, 0x0015, 0xF330); - if (phy->rev >= 2) { - b43_phy_write(dev, 0x0812, - (b43_phy_read(dev, 0x0812) & 0xFFCF) | - 0x0020); - b43_phy_write(dev, 0x0811, - (b43_phy_read(dev, 0x0811) & 0xFFCF) | - 0x0020); - } + b43_radio_write16(dev, 0x007A, + b43_radio_read16(dev, 0x007A) & 0x007F); + if (phy->rev >= 2) { + b43_phy_write(dev, 0x0003, (b43_phy_read(dev, 0x0003) + & 0xFF9F) | 0x0040); + } - b43_set_all_gains(dev, 3, 0, 1); - if (phy->radio_rev == 8) { - b43_radio_write16(dev, 0x0043, 0x001F); - } else { - tmp = b43_radio_read16(dev, 0x0052) & 0xFF0F; - b43_radio_write16(dev, 0x0052, tmp | 0x0060); - tmp = b43_radio_read16(dev, 0x0043) & 0xFFF0; - b43_radio_write16(dev, 0x0043, tmp | 0x0009); - } - b43_phy_write(dev, 0x005A, 0x0480); - b43_phy_write(dev, 0x0059, 0x0810); - b43_phy_write(dev, 0x0058, 0x000D); - udelay(20); - nrssi1 = (s16) ((b43_phy_read(dev, 0x047F) >> 8) & 0x003F); - if (nrssi1 >= 0x0020) - nrssi1 -= 0x0040; - if (nrssi0 == nrssi1) - phy->nrssislope = 0x00010000; - else - phy->nrssislope = 0x00400000 / (nrssi0 - nrssi1); - if (nrssi0 >= -4) { - phy->nrssi[0] = nrssi1; - phy->nrssi[1] = nrssi0; - } - if (phy->rev >= 3) { - b43_phy_write(dev, 0x002E, backup[10]); - b43_phy_write(dev, 0x002F, backup[11]); - b43_phy_write(dev, 0x080F, backup[12]); - b43_phy_write(dev, B43_PHY_G_LO_CONTROL, backup[13]); - } - if (phy->rev >= 2) { - b43_phy_write(dev, 0x0812, - b43_phy_read(dev, 0x0812) & 0xFFCF); - b43_phy_write(dev, 0x0811, - b43_phy_read(dev, 0x0811) & 0xFFCF); - } + b43_write16(dev, B43_MMIO_CHANNEL_EXT, + b43_read16(dev, B43_MMIO_CHANNEL_EXT) + | 0x2000); + b43_radio_write16(dev, 0x007A, + b43_radio_read16(dev, 0x007A) | 0x000F); + b43_phy_write(dev, 0x0015, 0xF330); + if (phy->rev >= 2) { + b43_phy_write(dev, 0x0812, + (b43_phy_read(dev, 0x0812) & 0xFFCF) | + 0x0020); + b43_phy_write(dev, 0x0811, + (b43_phy_read(dev, 0x0811) & 0xFFCF) | + 0x0020); + } - b43_radio_write16(dev, 0x007A, backup[0]); - b43_radio_write16(dev, 0x0052, backup[1]); - b43_radio_write16(dev, 0x0043, backup[2]); - b43_write16(dev, 0x03E2, backup[7]); - b43_write16(dev, 0x03E6, backup[8]); - b43_write16(dev, B43_MMIO_CHANNEL_EXT, backup[9]); - b43_phy_write(dev, 0x0015, backup[3]); - b43_phy_write(dev, 0x005A, backup[4]); - b43_phy_write(dev, 0x0059, backup[5]); - b43_phy_write(dev, 0x0058, backup[6]); - b43_synth_pu_workaround(dev, phy->channel); - b43_phy_write(dev, 0x0802, - b43_phy_read(dev, 0x0802) | (0x0001 | 0x0002)); - b43_set_original_gains(dev); - b43_phy_write(dev, B43_PHY_G_CRS, - b43_phy_read(dev, B43_PHY_G_CRS) | 0x8000); - if (phy->rev >= 3) { - b43_phy_write(dev, 0x0801, backup[14]); - b43_phy_write(dev, 0x0060, backup[15]); - b43_phy_write(dev, 0x0014, backup[16]); - b43_phy_write(dev, 0x0478, backup[17]); - } - b43_nrssi_mem_update(dev); - b43_calc_nrssi_threshold(dev); - break; - default: - B43_WARN_ON(1); + b43_set_all_gains(dev, 3, 0, 1); + if (phy->radio_rev == 8) { + b43_radio_write16(dev, 0x0043, 0x001F); + } else { + tmp = b43_radio_read16(dev, 0x0052) & 0xFF0F; + b43_radio_write16(dev, 0x0052, tmp | 0x0060); + tmp = b43_radio_read16(dev, 0x0043) & 0xFFF0; + b43_radio_write16(dev, 0x0043, tmp | 0x0009); + } + b43_phy_write(dev, 0x005A, 0x0480); + b43_phy_write(dev, 0x0059, 0x0810); + b43_phy_write(dev, 0x0058, 0x000D); + udelay(20); + nrssi1 = (s16) ((b43_phy_read(dev, 0x047F) >> 8) & 0x003F); + if (nrssi1 >= 0x0020) + nrssi1 -= 0x0040; + if (nrssi0 == nrssi1) + gphy->nrssislope = 0x00010000; + else + gphy->nrssislope = 0x00400000 / (nrssi0 - nrssi1); + if (nrssi0 >= -4) { + gphy->nrssi[0] = nrssi1; + gphy->nrssi[1] = nrssi0; + } + if (phy->rev >= 3) { + b43_phy_write(dev, 0x002E, backup[10]); + b43_phy_write(dev, 0x002F, backup[11]); + b43_phy_write(dev, 0x080F, backup[12]); + b43_phy_write(dev, B43_PHY_G_LO_CONTROL, backup[13]); } + if (phy->rev >= 2) { + b43_phy_write(dev, 0x0812, + b43_phy_read(dev, 0x0812) & 0xFFCF); + b43_phy_write(dev, 0x0811, + b43_phy_read(dev, 0x0811) & 0xFFCF); + } + + b43_radio_write16(dev, 0x007A, backup[0]); + b43_radio_write16(dev, 0x0052, backup[1]); + b43_radio_write16(dev, 0x0043, backup[2]); + b43_write16(dev, 0x03E2, backup[7]); + b43_write16(dev, 0x03E6, backup[8]); + b43_write16(dev, B43_MMIO_CHANNEL_EXT, backup[9]); + b43_phy_write(dev, 0x0015, backup[3]); + b43_phy_write(dev, 0x005A, backup[4]); + b43_phy_write(dev, 0x0059, backup[5]); + b43_phy_write(dev, 0x0058, backup[6]); + b43_synth_pu_workaround(dev, phy->channel); + b43_phy_write(dev, 0x0802, + b43_phy_read(dev, 0x0802) | (0x0001 | 0x0002)); + b43_set_original_gains(dev); + b43_phy_write(dev, B43_PHY_G_CRS, + b43_phy_read(dev, B43_PHY_G_CRS) | 0x8000); + if (phy->rev >= 3) { + b43_phy_write(dev, 0x0801, backup[14]); + b43_phy_write(dev, 0x0060, backup[15]); + b43_phy_write(dev, 0x0014, backup[16]); + b43_phy_write(dev, 0x0478, backup[17]); + } + b43_nrssi_mem_update(dev); + b43_calc_nrssi_threshold(dev); } -void b43_calc_nrssi_threshold(struct b43_wldev *dev) +static void b43_calc_nrssi_threshold(struct b43_wldev *dev) { struct b43_phy *phy = &dev->phy; - s32 threshold; + struct b43_phy_g *gphy = phy->g; s32 a, b; s16 tmp16; u16 tmp_u16; - switch (phy->type) { - case B43_PHYTYPE_B:{ - if (phy->radio_ver != 0x2050) - return; - if (! - (dev->dev->bus->sprom. - boardflags_lo & B43_BFL_RSSI)) - return; - - if (phy->radio_rev >= 6) { - threshold = - (phy->nrssi[1] - phy->nrssi[0]) * 32; - threshold += 20 * (phy->nrssi[0] + 1); - threshold /= 40; - } else - threshold = phy->nrssi[1] - 5; - - threshold = clamp_val(threshold, 0, 0x3E); - b43_phy_read(dev, 0x0020); /* dummy read */ - b43_phy_write(dev, 0x0020, - (((u16) threshold) << 8) | 0x001C); - - if (phy->radio_rev >= 6) { - b43_phy_write(dev, 0x0087, 0x0E0D); - b43_phy_write(dev, 0x0086, 0x0C0B); - b43_phy_write(dev, 0x0085, 0x0A09); - b43_phy_write(dev, 0x0084, 0x0808); - b43_phy_write(dev, 0x0083, 0x0808); - b43_phy_write(dev, 0x0082, 0x0604); - b43_phy_write(dev, 0x0081, 0x0302); - b43_phy_write(dev, 0x0080, 0x0100); - } - break; + B43_WARN_ON(phy->type != B43_PHYTYPE_G); + + if (!phy->gmode || + !(dev->dev->bus->sprom.boardflags_lo & B43_BFL_RSSI)) { + tmp16 = b43_nrssi_hw_read(dev, 0x20); + if (tmp16 >= 0x20) + tmp16 -= 0x40; + if (tmp16 < 3) { + b43_phy_write(dev, 0x048A, + (b43_phy_read(dev, 0x048A) + & 0xF000) | 0x09EB); + } else { + b43_phy_write(dev, 0x048A, + (b43_phy_read(dev, 0x048A) + & 0xF000) | 0x0AED); } - case B43_PHYTYPE_G: - if (!phy->gmode || - !(dev->dev->bus->sprom.boardflags_lo & B43_BFL_RSSI)) { - tmp16 = b43_nrssi_hw_read(dev, 0x20); - if (tmp16 >= 0x20) - tmp16 -= 0x40; - if (tmp16 < 3) { - b43_phy_write(dev, 0x048A, - (b43_phy_read(dev, 0x048A) - & 0xF000) | 0x09EB); - } else { - b43_phy_write(dev, 0x048A, - (b43_phy_read(dev, 0x048A) - & 0xF000) | 0x0AED); - } + } else { + if (gphy->interfmode == B43_INTERFMODE_NONWLAN) { + a = 0xE; + b = 0xA; + } else if (!gphy->aci_wlan_automatic && gphy->aci_enable) { + a = 0x13; + b = 0x12; } else { - if (phy->interfmode == B43_INTERFMODE_NONWLAN) { - a = 0xE; - b = 0xA; - } else if (!phy->aci_wlan_automatic && phy->aci_enable) { - a = 0x13; - b = 0x12; - } else { - a = 0xE; - b = 0x11; - } - - a = a * (phy->nrssi[1] - phy->nrssi[0]); - a += (phy->nrssi[0] << 6); - if (a < 32) - a += 31; - else - a += 32; - a = a >> 6; - a = clamp_val(a, -31, 31); - - b = b * (phy->nrssi[1] - phy->nrssi[0]); - b += (phy->nrssi[0] << 6); - if (b < 32) - b += 31; - else - b += 32; - b = b >> 6; - b = clamp_val(b, -31, 31); - - tmp_u16 = b43_phy_read(dev, 0x048A) & 0xF000; - tmp_u16 |= ((u32) b & 0x0000003F); - tmp_u16 |= (((u32) a & 0x0000003F) << 6); - b43_phy_write(dev, 0x048A, tmp_u16); + a = 0xE; + b = 0x11; } - break; - default: - B43_WARN_ON(1); + + a = a * (gphy->nrssi[1] - gphy->nrssi[0]); + a += (gphy->nrssi[0] << 6); + if (a < 32) + a += 31; + else + a += 32; + a = a >> 6; + a = clamp_val(a, -31, 31); + + b = b * (gphy->nrssi[1] - gphy->nrssi[0]); + b += (gphy->nrssi[0] << 6); + if (b < 32) + b += 31; + else + b += 32; + b = b >> 6; + b = clamp_val(b, -31, 31); + + tmp_u16 = b43_phy_read(dev, 0x048A) & 0xF000; + tmp_u16 |= ((u32) b & 0x0000003F); + tmp_u16 |= (((u32) a & 0x0000003F) << 6); + b43_phy_write(dev, 0x048A, tmp_u16); } } @@ -2860,9 +894,10 @@ static void b43_radio_interference_mitigation_enable(struct b43_wldev *dev, int mode) { struct b43_phy *phy = &dev->phy; + struct b43_phy_g *gphy = phy->g; u16 tmp, flipped; size_t stackidx = 0; - u32 *stack = phy->interfstack; + u32 *stack = gphy->interfstack; switch (mode) { case B43_INTERFMODE_NONWLAN: @@ -2928,7 +963,7 @@ b43_radio_interference_mitigation_enable(struct b43_wldev *dev, int mode) if (b43_phy_read(dev, 0x0033) & 0x0800) break; - phy->aci_enable = 1; + gphy->aci_enable = 1; phy_stacksave(B43_PHY_RADIO_BITFIELD); phy_stacksave(B43_PHY_G_CRS); @@ -3064,7 +1099,8 @@ static void b43_radio_interference_mitigation_disable(struct b43_wldev *dev, int mode) { struct b43_phy *phy = &dev->phy; - u32 *stack = phy->interfstack; + struct b43_phy_g *gphy = phy->g; + u32 *stack = gphy->interfstack; switch (mode) { case B43_INTERFMODE_NONWLAN: @@ -3103,7 +1139,7 @@ b43_radio_interference_mitigation_disable(struct b43_wldev *dev, int mode) if (!(b43_phy_read(dev, 0x0033) & 0x0800)) break; - phy->aci_enable = 0; + gphy->aci_enable = 0; phy_stackrestore(B43_PHY_RADIO_BITFIELD); phy_stackrestore(B43_PHY_G_CRS); @@ -3153,47 +1189,6 @@ b43_radio_interference_mitigation_disable(struct b43_wldev *dev, int mode) #undef ofdmtab_stacksave #undef ofdmtab_stackrestore -int b43_radio_set_interference_mitigation(struct b43_wldev *dev, int mode) -{ - struct b43_phy *phy = &dev->phy; - int currentmode; - - if ((phy->type != B43_PHYTYPE_G) || (phy->rev == 0) || (!phy->gmode)) - return -ENODEV; - - phy->aci_wlan_automatic = 0; - switch (mode) { - case B43_INTERFMODE_AUTOWLAN: - phy->aci_wlan_automatic = 1; - if (phy->aci_enable) - mode = B43_INTERFMODE_MANUALWLAN; - else - mode = B43_INTERFMODE_NONE; - break; - case B43_INTERFMODE_NONE: - case B43_INTERFMODE_NONWLAN: - case B43_INTERFMODE_MANUALWLAN: - break; - default: - return -EINVAL; - } - - currentmode = phy->interfmode; - if (currentmode == mode) - return 0; - if (currentmode != B43_INTERFMODE_NONE) - b43_radio_interference_mitigation_disable(dev, currentmode); - - if (mode == B43_INTERFMODE_NONE) { - phy->aci_enable = 0; - phy->aci_hw_rssi = 0; - } else - b43_radio_interference_mitigation_enable(dev, mode); - phy->interfmode = mode; - - return 0; -} - static u16 b43_radio_core_calibration_value(struct b43_wldev *dev) { u16 reg, index, ret; @@ -3219,13 +1214,14 @@ static u16 radio2050_rfover_val(struct b43_wldev *dev, u16 phy_register, unsigned int lpd) { struct b43_phy *phy = &dev->phy; + struct b43_phy_g *gphy = phy->g; struct ssb_sprom *sprom = &(dev->dev->bus->sprom); if (!phy->gmode) return 0; if (has_loopback_gain(phy)) { - int max_lb_gain = phy->max_lb_gain; + int max_lb_gain = gphy->max_lb_gain; u16 extlna; u16 i; @@ -3606,301 +1602,1682 @@ u16 b43_radio_init2050(struct b43_wldev *dev) return ret; } -void b43_radio_init2060(struct b43_wldev *dev) +static void b43_phy_initb5(struct b43_wldev *dev) { - int err; + struct ssb_bus *bus = dev->dev->bus; + struct b43_phy *phy = &dev->phy; + struct b43_phy_g *gphy = phy->g; + u16 offset, value; + u8 old_channel; - b43_radio_write16(dev, 0x0004, 0x00C0); - b43_radio_write16(dev, 0x0005, 0x0008); - b43_radio_write16(dev, 0x0009, 0x0040); - b43_radio_write16(dev, 0x0005, 0x00AA); - b43_radio_write16(dev, 0x0032, 0x008F); - b43_radio_write16(dev, 0x0006, 0x008F); - b43_radio_write16(dev, 0x0034, 0x008F); - b43_radio_write16(dev, 0x002C, 0x0007); - b43_radio_write16(dev, 0x0082, 0x0080); - b43_radio_write16(dev, 0x0080, 0x0000); - b43_radio_write16(dev, 0x003F, 0x00DA); - b43_radio_write16(dev, 0x0005, b43_radio_read16(dev, 0x0005) & ~0x0008); - b43_radio_write16(dev, 0x0081, b43_radio_read16(dev, 0x0081) & ~0x0010); - b43_radio_write16(dev, 0x0081, b43_radio_read16(dev, 0x0081) & ~0x0020); - b43_radio_write16(dev, 0x0081, b43_radio_read16(dev, 0x0081) & ~0x0020); - msleep(1); /* delay 400usec */ - - b43_radio_write16(dev, 0x0081, - (b43_radio_read16(dev, 0x0081) & ~0x0020) | 0x0010); - msleep(1); /* delay 400usec */ - - b43_radio_write16(dev, 0x0005, - (b43_radio_read16(dev, 0x0005) & ~0x0008) | 0x0008); - b43_radio_write16(dev, 0x0085, b43_radio_read16(dev, 0x0085) & ~0x0010); - b43_radio_write16(dev, 0x0005, b43_radio_read16(dev, 0x0005) & ~0x0008); - b43_radio_write16(dev, 0x0081, b43_radio_read16(dev, 0x0081) & ~0x0040); - b43_radio_write16(dev, 0x0081, - (b43_radio_read16(dev, 0x0081) & ~0x0040) | 0x0040); - b43_radio_write16(dev, 0x0005, - (b43_radio_read16(dev, 0x0081) & ~0x0008) | 0x0008); - b43_phy_write(dev, 0x0063, 0xDDC6); - b43_phy_write(dev, 0x0069, 0x07BE); - b43_phy_write(dev, 0x006A, 0x0000); - - err = b43_radio_selectchannel(dev, B43_DEFAULT_CHANNEL_A, 0); - B43_WARN_ON(err); + if (phy->analog == 1) { + b43_radio_write16(dev, 0x007A, b43_radio_read16(dev, 0x007A) + | 0x0050); + } + if ((bus->boardinfo.vendor != SSB_BOARDVENDOR_BCM) && + (bus->boardinfo.type != SSB_BOARD_BU4306)) { + value = 0x2120; + for (offset = 0x00A8; offset < 0x00C7; offset++) { + b43_phy_write(dev, offset, value); + value += 0x202; + } + } + b43_phy_write(dev, 0x0035, (b43_phy_read(dev, 0x0035) & 0xF0FF) + | 0x0700); + if (phy->radio_ver == 0x2050) + b43_phy_write(dev, 0x0038, 0x0667); - msleep(1); + if (phy->gmode || phy->rev >= 2) { + if (phy->radio_ver == 0x2050) { + b43_radio_write16(dev, 0x007A, + b43_radio_read16(dev, 0x007A) + | 0x0020); + b43_radio_write16(dev, 0x0051, + b43_radio_read16(dev, 0x0051) + | 0x0004); + } + b43_write16(dev, B43_MMIO_PHY_RADIO, 0x0000); + + b43_phy_write(dev, 0x0802, b43_phy_read(dev, 0x0802) | 0x0100); + b43_phy_write(dev, 0x042B, b43_phy_read(dev, 0x042B) | 0x2000); + + b43_phy_write(dev, 0x001C, 0x186A); + + b43_phy_write(dev, 0x0013, + (b43_phy_read(dev, 0x0013) & 0x00FF) | 0x1900); + b43_phy_write(dev, 0x0035, + (b43_phy_read(dev, 0x0035) & 0xFFC0) | 0x0064); + b43_phy_write(dev, 0x005D, + (b43_phy_read(dev, 0x005D) & 0xFF80) | 0x000A); + } + + if (dev->bad_frames_preempt) { + b43_phy_write(dev, B43_PHY_RADIO_BITFIELD, + b43_phy_read(dev, + B43_PHY_RADIO_BITFIELD) | (1 << 11)); + } + + if (phy->analog == 1) { + b43_phy_write(dev, 0x0026, 0xCE00); + b43_phy_write(dev, 0x0021, 0x3763); + b43_phy_write(dev, 0x0022, 0x1BC3); + b43_phy_write(dev, 0x0023, 0x06F9); + b43_phy_write(dev, 0x0024, 0x037E); + } else + b43_phy_write(dev, 0x0026, 0xCC00); + b43_phy_write(dev, 0x0030, 0x00C6); + b43_write16(dev, 0x03EC, 0x3F22); + + if (phy->analog == 1) + b43_phy_write(dev, 0x0020, 0x3E1C); + else + b43_phy_write(dev, 0x0020, 0x301C); + + if (phy->analog == 0) + b43_write16(dev, 0x03E4, 0x3000); + + old_channel = phy->channel; + /* Force to channel 7, even if not supported. */ + b43_gphy_channel_switch(dev, 7, 0); + + if (phy->radio_ver != 0x2050) { + b43_radio_write16(dev, 0x0075, 0x0080); + b43_radio_write16(dev, 0x0079, 0x0081); + } + + b43_radio_write16(dev, 0x0050, 0x0020); + b43_radio_write16(dev, 0x0050, 0x0023); + + if (phy->radio_ver == 0x2050) { + b43_radio_write16(dev, 0x0050, 0x0020); + b43_radio_write16(dev, 0x005A, 0x0070); + } + + b43_radio_write16(dev, 0x005B, 0x007B); + b43_radio_write16(dev, 0x005C, 0x00B0); + + b43_radio_write16(dev, 0x007A, b43_radio_read16(dev, 0x007A) | 0x0007); + + b43_gphy_channel_switch(dev, old_channel, 0); + + b43_phy_write(dev, 0x0014, 0x0080); + b43_phy_write(dev, 0x0032, 0x00CA); + b43_phy_write(dev, 0x002A, 0x88A3); + + b43_set_txpower_g(dev, &gphy->bbatt, &gphy->rfatt, gphy->tx_control); + + if (phy->radio_ver == 0x2050) + b43_radio_write16(dev, 0x005D, 0x000D); + + b43_write16(dev, 0x03E4, (b43_read16(dev, 0x03E4) & 0xFFC0) | 0x0004); } -static inline u16 freq_r3A_value(u16 frequency) +static void b43_phy_initb6(struct b43_wldev *dev) { - u16 value; + struct b43_phy *phy = &dev->phy; + struct b43_phy_g *gphy = phy->g; + u16 offset, val; + u8 old_channel; + + b43_phy_write(dev, 0x003E, 0x817A); + b43_radio_write16(dev, 0x007A, + (b43_radio_read16(dev, 0x007A) | 0x0058)); + if (phy->radio_rev == 4 || phy->radio_rev == 5) { + b43_radio_write16(dev, 0x51, 0x37); + b43_radio_write16(dev, 0x52, 0x70); + b43_radio_write16(dev, 0x53, 0xB3); + b43_radio_write16(dev, 0x54, 0x9B); + b43_radio_write16(dev, 0x5A, 0x88); + b43_radio_write16(dev, 0x5B, 0x88); + b43_radio_write16(dev, 0x5D, 0x88); + b43_radio_write16(dev, 0x5E, 0x88); + b43_radio_write16(dev, 0x7D, 0x88); + b43_hf_write(dev, b43_hf_read(dev) + | B43_HF_TSSIRPSMW); + } + B43_WARN_ON(phy->radio_rev == 6 || phy->radio_rev == 7); /* We had code for these revs here... */ + if (phy->radio_rev == 8) { + b43_radio_write16(dev, 0x51, 0); + b43_radio_write16(dev, 0x52, 0x40); + b43_radio_write16(dev, 0x53, 0xB7); + b43_radio_write16(dev, 0x54, 0x98); + b43_radio_write16(dev, 0x5A, 0x88); + b43_radio_write16(dev, 0x5B, 0x6B); + b43_radio_write16(dev, 0x5C, 0x0F); + if (dev->dev->bus->sprom.boardflags_lo & B43_BFL_ALTIQ) { + b43_radio_write16(dev, 0x5D, 0xFA); + b43_radio_write16(dev, 0x5E, 0xD8); + } else { + b43_radio_write16(dev, 0x5D, 0xF5); + b43_radio_write16(dev, 0x5E, 0xB8); + } + b43_radio_write16(dev, 0x0073, 0x0003); + b43_radio_write16(dev, 0x007D, 0x00A8); + b43_radio_write16(dev, 0x007C, 0x0001); + b43_radio_write16(dev, 0x007E, 0x0008); + } + val = 0x1E1F; + for (offset = 0x0088; offset < 0x0098; offset++) { + b43_phy_write(dev, offset, val); + val -= 0x0202; + } + val = 0x3E3F; + for (offset = 0x0098; offset < 0x00A8; offset++) { + b43_phy_write(dev, offset, val); + val -= 0x0202; + } + val = 0x2120; + for (offset = 0x00A8; offset < 0x00C8; offset++) { + b43_phy_write(dev, offset, (val & 0x3F3F)); + val += 0x0202; + } + if (phy->type == B43_PHYTYPE_G) { + b43_radio_write16(dev, 0x007A, + b43_radio_read16(dev, 0x007A) | 0x0020); + b43_radio_write16(dev, 0x0051, + b43_radio_read16(dev, 0x0051) | 0x0004); + b43_phy_write(dev, 0x0802, b43_phy_read(dev, 0x0802) | 0x0100); + b43_phy_write(dev, 0x042B, b43_phy_read(dev, 0x042B) | 0x2000); + b43_phy_write(dev, 0x5B, 0); + b43_phy_write(dev, 0x5C, 0); + } + + old_channel = phy->channel; + if (old_channel >= 8) + b43_gphy_channel_switch(dev, 1, 0); + else + b43_gphy_channel_switch(dev, 13, 0); + + b43_radio_write16(dev, 0x0050, 0x0020); + b43_radio_write16(dev, 0x0050, 0x0023); + udelay(40); + if (phy->radio_rev < 6 || phy->radio_rev == 8) { + b43_radio_write16(dev, 0x7C, (b43_radio_read16(dev, 0x7C) + | 0x0002)); + b43_radio_write16(dev, 0x50, 0x20); + } + if (phy->radio_rev <= 2) { + b43_radio_write16(dev, 0x7C, 0x20); + b43_radio_write16(dev, 0x5A, 0x70); + b43_radio_write16(dev, 0x5B, 0x7B); + b43_radio_write16(dev, 0x5C, 0xB0); + } + b43_radio_write16(dev, 0x007A, + (b43_radio_read16(dev, 0x007A) & 0x00F8) | 0x0007); + + b43_gphy_channel_switch(dev, old_channel, 0); - if (frequency < 5091) - value = 0x0040; - else if (frequency < 5321) - value = 0x0000; - else if (frequency < 5806) - value = 0x0080; + b43_phy_write(dev, 0x0014, 0x0200); + if (phy->radio_rev >= 6) + b43_phy_write(dev, 0x2A, 0x88C2); else - value = 0x0040; + b43_phy_write(dev, 0x2A, 0x8AC0); + b43_phy_write(dev, 0x0038, 0x0668); + b43_set_txpower_g(dev, &gphy->bbatt, &gphy->rfatt, gphy->tx_control); + if (phy->radio_rev <= 5) { + b43_phy_write(dev, 0x5D, (b43_phy_read(dev, 0x5D) + & 0xFF80) | 0x0003); + } + if (phy->radio_rev <= 2) + b43_radio_write16(dev, 0x005D, 0x000D); - return value; + if (phy->analog == 4) { + b43_write16(dev, 0x3E4, 9); + b43_phy_write(dev, 0x61, b43_phy_read(dev, 0x61) + & 0x0FFF); + } else { + b43_phy_write(dev, 0x0002, (b43_phy_read(dev, 0x0002) & 0xFFC0) + | 0x0004); + } + if (phy->type == B43_PHYTYPE_B) + B43_WARN_ON(1); + else if (phy->type == B43_PHYTYPE_G) + b43_write16(dev, 0x03E6, 0x0); } -void b43_radio_set_tx_iq(struct b43_wldev *dev) +static void b43_calc_loopback_gain(struct b43_wldev *dev) { - static const u8 data_high[5] = { 0x00, 0x40, 0x80, 0x90, 0xD0 }; - static const u8 data_low[5] = { 0x00, 0x01, 0x05, 0x06, 0x0A }; - u16 tmp = b43_radio_read16(dev, 0x001E); - int i, j; + struct b43_phy *phy = &dev->phy; + struct b43_phy_g *gphy = phy->g; + u16 backup_phy[16] = { 0 }; + u16 backup_radio[3]; + u16 backup_bband; + u16 i, j, loop_i_max; + u16 trsw_rx; + u16 loop1_outer_done, loop1_inner_done; - for (i = 0; i < 5; i++) { - for (j = 0; j < 5; j++) { - if (tmp == (data_high[i] << 4 | data_low[j])) { - b43_phy_write(dev, 0x0069, - (i - j) << 8 | 0x00C0); - return; + backup_phy[0] = b43_phy_read(dev, B43_PHY_CRS0); + backup_phy[1] = b43_phy_read(dev, B43_PHY_CCKBBANDCFG); + backup_phy[2] = b43_phy_read(dev, B43_PHY_RFOVER); + backup_phy[3] = b43_phy_read(dev, B43_PHY_RFOVERVAL); + if (phy->rev != 1) { /* Not in specs, but needed to prevent PPC machine check */ + backup_phy[4] = b43_phy_read(dev, B43_PHY_ANALOGOVER); + backup_phy[5] = b43_phy_read(dev, B43_PHY_ANALOGOVERVAL); + } + backup_phy[6] = b43_phy_read(dev, B43_PHY_CCK(0x5A)); + backup_phy[7] = b43_phy_read(dev, B43_PHY_CCK(0x59)); + backup_phy[8] = b43_phy_read(dev, B43_PHY_CCK(0x58)); + backup_phy[9] = b43_phy_read(dev, B43_PHY_CCK(0x0A)); + backup_phy[10] = b43_phy_read(dev, B43_PHY_CCK(0x03)); + backup_phy[11] = b43_phy_read(dev, B43_PHY_LO_MASK); + backup_phy[12] = b43_phy_read(dev, B43_PHY_LO_CTL); + backup_phy[13] = b43_phy_read(dev, B43_PHY_CCK(0x2B)); + backup_phy[14] = b43_phy_read(dev, B43_PHY_PGACTL); + backup_phy[15] = b43_phy_read(dev, B43_PHY_LO_LEAKAGE); + backup_bband = gphy->bbatt.att; + backup_radio[0] = b43_radio_read16(dev, 0x52); + backup_radio[1] = b43_radio_read16(dev, 0x43); + backup_radio[2] = b43_radio_read16(dev, 0x7A); + + b43_phy_write(dev, B43_PHY_CRS0, + b43_phy_read(dev, B43_PHY_CRS0) & 0x3FFF); + b43_phy_write(dev, B43_PHY_CCKBBANDCFG, + b43_phy_read(dev, B43_PHY_CCKBBANDCFG) | 0x8000); + b43_phy_write(dev, B43_PHY_RFOVER, + b43_phy_read(dev, B43_PHY_RFOVER) | 0x0002); + b43_phy_write(dev, B43_PHY_RFOVERVAL, + b43_phy_read(dev, B43_PHY_RFOVERVAL) & 0xFFFD); + b43_phy_write(dev, B43_PHY_RFOVER, + b43_phy_read(dev, B43_PHY_RFOVER) | 0x0001); + b43_phy_write(dev, B43_PHY_RFOVERVAL, + b43_phy_read(dev, B43_PHY_RFOVERVAL) & 0xFFFE); + if (phy->rev != 1) { /* Not in specs, but needed to prevent PPC machine check */ + b43_phy_write(dev, B43_PHY_ANALOGOVER, + b43_phy_read(dev, B43_PHY_ANALOGOVER) | 0x0001); + b43_phy_write(dev, B43_PHY_ANALOGOVERVAL, + b43_phy_read(dev, + B43_PHY_ANALOGOVERVAL) & 0xFFFE); + b43_phy_write(dev, B43_PHY_ANALOGOVER, + b43_phy_read(dev, B43_PHY_ANALOGOVER) | 0x0002); + b43_phy_write(dev, B43_PHY_ANALOGOVERVAL, + b43_phy_read(dev, + B43_PHY_ANALOGOVERVAL) & 0xFFFD); + } + b43_phy_write(dev, B43_PHY_RFOVER, + b43_phy_read(dev, B43_PHY_RFOVER) | 0x000C); + b43_phy_write(dev, B43_PHY_RFOVERVAL, + b43_phy_read(dev, B43_PHY_RFOVERVAL) | 0x000C); + b43_phy_write(dev, B43_PHY_RFOVER, + b43_phy_read(dev, B43_PHY_RFOVER) | 0x0030); + b43_phy_write(dev, B43_PHY_RFOVERVAL, + (b43_phy_read(dev, B43_PHY_RFOVERVAL) + & 0xFFCF) | 0x10); + + b43_phy_write(dev, B43_PHY_CCK(0x5A), 0x0780); + b43_phy_write(dev, B43_PHY_CCK(0x59), 0xC810); + b43_phy_write(dev, B43_PHY_CCK(0x58), 0x000D); + + b43_phy_write(dev, B43_PHY_CCK(0x0A), + b43_phy_read(dev, B43_PHY_CCK(0x0A)) | 0x2000); + if (phy->rev != 1) { /* Not in specs, but needed to prevent PPC machine check */ + b43_phy_write(dev, B43_PHY_ANALOGOVER, + b43_phy_read(dev, B43_PHY_ANALOGOVER) | 0x0004); + b43_phy_write(dev, B43_PHY_ANALOGOVERVAL, + b43_phy_read(dev, + B43_PHY_ANALOGOVERVAL) & 0xFFFB); + } + b43_phy_write(dev, B43_PHY_CCK(0x03), + (b43_phy_read(dev, B43_PHY_CCK(0x03)) + & 0xFF9F) | 0x40); + + if (phy->radio_rev == 8) { + b43_radio_write16(dev, 0x43, 0x000F); + } else { + b43_radio_write16(dev, 0x52, 0); + b43_radio_write16(dev, 0x43, (b43_radio_read16(dev, 0x43) + & 0xFFF0) | 0x9); + } + b43_gphy_set_baseband_attenuation(dev, 11); + + if (phy->rev >= 3) + b43_phy_write(dev, B43_PHY_LO_MASK, 0xC020); + else + b43_phy_write(dev, B43_PHY_LO_MASK, 0x8020); + b43_phy_write(dev, B43_PHY_LO_CTL, 0); + + b43_phy_write(dev, B43_PHY_CCK(0x2B), + (b43_phy_read(dev, B43_PHY_CCK(0x2B)) + & 0xFFC0) | 0x01); + b43_phy_write(dev, B43_PHY_CCK(0x2B), + (b43_phy_read(dev, B43_PHY_CCK(0x2B)) + & 0xC0FF) | 0x800); + + b43_phy_write(dev, B43_PHY_RFOVER, + b43_phy_read(dev, B43_PHY_RFOVER) | 0x0100); + b43_phy_write(dev, B43_PHY_RFOVERVAL, + b43_phy_read(dev, B43_PHY_RFOVERVAL) & 0xCFFF); + + if (dev->dev->bus->sprom.boardflags_lo & B43_BFL_EXTLNA) { + if (phy->rev >= 7) { + b43_phy_write(dev, B43_PHY_RFOVER, + b43_phy_read(dev, B43_PHY_RFOVER) + | 0x0800); + b43_phy_write(dev, B43_PHY_RFOVERVAL, + b43_phy_read(dev, B43_PHY_RFOVERVAL) + | 0x8000); + } + } + b43_radio_write16(dev, 0x7A, b43_radio_read16(dev, 0x7A) + & 0x00F7); + + j = 0; + loop_i_max = (phy->radio_rev == 8) ? 15 : 9; + for (i = 0; i < loop_i_max; i++) { + for (j = 0; j < 16; j++) { + b43_radio_write16(dev, 0x43, i); + b43_phy_write(dev, B43_PHY_RFOVERVAL, + (b43_phy_read(dev, B43_PHY_RFOVERVAL) + & 0xF0FF) | (j << 8)); + b43_phy_write(dev, B43_PHY_PGACTL, + (b43_phy_read(dev, B43_PHY_PGACTL) + & 0x0FFF) | 0xA000); + b43_phy_write(dev, B43_PHY_PGACTL, + b43_phy_read(dev, B43_PHY_PGACTL) + | 0xF000); + udelay(20); + if (b43_phy_read(dev, B43_PHY_LO_LEAKAGE) >= 0xDFC) + goto exit_loop1; + } + } + exit_loop1: + loop1_outer_done = i; + loop1_inner_done = j; + if (j >= 8) { + b43_phy_write(dev, B43_PHY_RFOVERVAL, + b43_phy_read(dev, B43_PHY_RFOVERVAL) + | 0x30); + trsw_rx = 0x1B; + for (j = j - 8; j < 16; j++) { + b43_phy_write(dev, B43_PHY_RFOVERVAL, + (b43_phy_read(dev, B43_PHY_RFOVERVAL) + & 0xF0FF) | (j << 8)); + b43_phy_write(dev, B43_PHY_PGACTL, + (b43_phy_read(dev, B43_PHY_PGACTL) + & 0x0FFF) | 0xA000); + b43_phy_write(dev, B43_PHY_PGACTL, + b43_phy_read(dev, B43_PHY_PGACTL) + | 0xF000); + udelay(20); + trsw_rx -= 3; + if (b43_phy_read(dev, B43_PHY_LO_LEAKAGE) >= 0xDFC) + goto exit_loop2; + } + } else + trsw_rx = 0x18; + exit_loop2: + + if (phy->rev != 1) { /* Not in specs, but needed to prevent PPC machine check */ + b43_phy_write(dev, B43_PHY_ANALOGOVER, backup_phy[4]); + b43_phy_write(dev, B43_PHY_ANALOGOVERVAL, backup_phy[5]); + } + b43_phy_write(dev, B43_PHY_CCK(0x5A), backup_phy[6]); + b43_phy_write(dev, B43_PHY_CCK(0x59), backup_phy[7]); + b43_phy_write(dev, B43_PHY_CCK(0x58), backup_phy[8]); + b43_phy_write(dev, B43_PHY_CCK(0x0A), backup_phy[9]); + b43_phy_write(dev, B43_PHY_CCK(0x03), backup_phy[10]); + b43_phy_write(dev, B43_PHY_LO_MASK, backup_phy[11]); + b43_phy_write(dev, B43_PHY_LO_CTL, backup_phy[12]); + b43_phy_write(dev, B43_PHY_CCK(0x2B), backup_phy[13]); + b43_phy_write(dev, B43_PHY_PGACTL, backup_phy[14]); + + b43_gphy_set_baseband_attenuation(dev, backup_bband); + + b43_radio_write16(dev, 0x52, backup_radio[0]); + b43_radio_write16(dev, 0x43, backup_radio[1]); + b43_radio_write16(dev, 0x7A, backup_radio[2]); + + b43_phy_write(dev, B43_PHY_RFOVER, backup_phy[2] | 0x0003); + udelay(10); + b43_phy_write(dev, B43_PHY_RFOVER, backup_phy[2]); + b43_phy_write(dev, B43_PHY_RFOVERVAL, backup_phy[3]); + b43_phy_write(dev, B43_PHY_CRS0, backup_phy[0]); + b43_phy_write(dev, B43_PHY_CCKBBANDCFG, backup_phy[1]); + + gphy->max_lb_gain = + ((loop1_inner_done * 6) - (loop1_outer_done * 4)) - 11; + gphy->trsw_rx_gain = trsw_rx * 2; +} + +static void b43_hardware_pctl_early_init(struct b43_wldev *dev) +{ + struct b43_phy *phy = &dev->phy; + + if (!b43_has_hardware_pctl(dev)) { + b43_phy_write(dev, 0x047A, 0xC111); + return; + } + + b43_phy_write(dev, 0x0036, b43_phy_read(dev, 0x0036) & 0xFEFF); + b43_phy_write(dev, 0x002F, 0x0202); + b43_phy_write(dev, 0x047C, b43_phy_read(dev, 0x047C) | 0x0002); + b43_phy_write(dev, 0x047A, b43_phy_read(dev, 0x047A) | 0xF000); + if (phy->radio_ver == 0x2050 && phy->radio_rev == 8) { + b43_phy_write(dev, 0x047A, (b43_phy_read(dev, 0x047A) + & 0xFF0F) | 0x0010); + b43_phy_write(dev, 0x005D, b43_phy_read(dev, 0x005D) + | 0x8000); + b43_phy_write(dev, 0x004E, (b43_phy_read(dev, 0x004E) + & 0xFFC0) | 0x0010); + b43_phy_write(dev, 0x002E, 0xC07F); + b43_phy_write(dev, 0x0036, b43_phy_read(dev, 0x0036) + | 0x0400); + } else { + b43_phy_write(dev, 0x0036, b43_phy_read(dev, 0x0036) + | 0x0200); + b43_phy_write(dev, 0x0036, b43_phy_read(dev, 0x0036) + | 0x0400); + b43_phy_write(dev, 0x005D, b43_phy_read(dev, 0x005D) + & 0x7FFF); + b43_phy_write(dev, 0x004F, b43_phy_read(dev, 0x004F) + & 0xFFFE); + b43_phy_write(dev, 0x004E, (b43_phy_read(dev, 0x004E) + & 0xFFC0) | 0x0010); + b43_phy_write(dev, 0x002E, 0xC07F); + b43_phy_write(dev, 0x047A, (b43_phy_read(dev, 0x047A) + & 0xFF0F) | 0x0010); + } +} + +/* Hardware power control for G-PHY */ +static void b43_hardware_pctl_init_gphy(struct b43_wldev *dev) +{ + struct b43_phy *phy = &dev->phy; + struct b43_phy_g *gphy = phy->g; + + if (!b43_has_hardware_pctl(dev)) { + /* No hardware power control */ + b43_hf_write(dev, b43_hf_read(dev) & ~B43_HF_HWPCTL); + return; + } + + b43_phy_write(dev, 0x0036, (b43_phy_read(dev, 0x0036) & 0xFFC0) + | (gphy->tgt_idle_tssi - gphy->cur_idle_tssi)); + b43_phy_write(dev, 0x0478, (b43_phy_read(dev, 0x0478) & 0xFF00) + | (gphy->tgt_idle_tssi - gphy->cur_idle_tssi)); + b43_gphy_tssi_power_lt_init(dev); + b43_gphy_gain_lt_init(dev); + b43_phy_write(dev, 0x0060, b43_phy_read(dev, 0x0060) & 0xFFBF); + b43_phy_write(dev, 0x0014, 0x0000); + + B43_WARN_ON(phy->rev < 6); + b43_phy_write(dev, 0x0478, b43_phy_read(dev, 0x0478) + | 0x0800); + b43_phy_write(dev, 0x0478, b43_phy_read(dev, 0x0478) + & 0xFEFF); + b43_phy_write(dev, 0x0801, b43_phy_read(dev, 0x0801) + & 0xFFBF); + + b43_gphy_dc_lt_init(dev, 1); + + /* Enable hardware pctl in firmware. */ + b43_hf_write(dev, b43_hf_read(dev) | B43_HF_HWPCTL); +} + +/* Intialize B/G PHY power control */ +static void b43_phy_init_pctl(struct b43_wldev *dev) +{ + struct ssb_bus *bus = dev->dev->bus; + struct b43_phy *phy = &dev->phy; + struct b43_phy_g *gphy = phy->g; + struct b43_rfatt old_rfatt; + struct b43_bbatt old_bbatt; + u8 old_tx_control = 0; + + B43_WARN_ON(phy->type != B43_PHYTYPE_G); + + if ((bus->boardinfo.vendor == SSB_BOARDVENDOR_BCM) && + (bus->boardinfo.type == SSB_BOARD_BU4306)) + return; + + b43_phy_write(dev, 0x0028, 0x8018); + + /* This does something with the Analog... */ + b43_write16(dev, B43_MMIO_PHY0, b43_read16(dev, B43_MMIO_PHY0) + & 0xFFDF); + + if (!phy->gmode) + return; + b43_hardware_pctl_early_init(dev); + if (gphy->cur_idle_tssi == 0) { + if (phy->radio_ver == 0x2050 && phy->analog == 0) { + b43_radio_write16(dev, 0x0076, + (b43_radio_read16(dev, 0x0076) + & 0x00F7) | 0x0084); + } else { + struct b43_rfatt rfatt; + struct b43_bbatt bbatt; + + memcpy(&old_rfatt, &gphy->rfatt, sizeof(old_rfatt)); + memcpy(&old_bbatt, &gphy->bbatt, sizeof(old_bbatt)); + old_tx_control = gphy->tx_control; + + bbatt.att = 11; + if (phy->radio_rev == 8) { + rfatt.att = 15; + rfatt.with_padmix = 1; + } else { + rfatt.att = 9; + rfatt.with_padmix = 0; } + b43_set_txpower_g(dev, &bbatt, &rfatt, 0); + } + b43_dummy_transmission(dev); + gphy->cur_idle_tssi = b43_phy_read(dev, B43_PHY_ITSSI); + if (B43_DEBUG) { + /* Current-Idle-TSSI sanity check. */ + if (abs(gphy->cur_idle_tssi - gphy->tgt_idle_tssi) >= 20) { + b43dbg(dev->wl, + "!WARNING! Idle-TSSI phy->cur_idle_tssi " + "measuring failed. (cur=%d, tgt=%d). Disabling TX power " + "adjustment.\n", gphy->cur_idle_tssi, + gphy->tgt_idle_tssi); + gphy->cur_idle_tssi = 0; + } + } + if (phy->radio_ver == 0x2050 && phy->analog == 0) { + b43_radio_write16(dev, 0x0076, + b43_radio_read16(dev, 0x0076) + & 0xFF7B); + } else { + b43_set_txpower_g(dev, &old_bbatt, + &old_rfatt, old_tx_control); } } + b43_hardware_pctl_init_gphy(dev); + b43_shm_clear_tssi(dev); } -int b43_radio_selectchannel(struct b43_wldev *dev, - u8 channel, int synthetic_pu_workaround) +static void b43_phy_initg(struct b43_wldev *dev) { struct b43_phy *phy = &dev->phy; - u16 r8, tmp; - u16 freq; - u16 channelcookie, savedcookie; - int err = 0; - - if (channel == 0xFF) { - switch (phy->type) { - case B43_PHYTYPE_A: - channel = B43_DEFAULT_CHANNEL_A; - break; - case B43_PHYTYPE_B: - case B43_PHYTYPE_G: - channel = B43_DEFAULT_CHANNEL_BG; - break; - case B43_PHYTYPE_N: - //FIXME check if we are on 2.4GHz or 5GHz and set a default channel. - channel = 1; - break; - default: - B43_WARN_ON(1); + struct b43_phy_g *gphy = phy->g; + u16 tmp; + + if (phy->rev == 1) + b43_phy_initb5(dev); + else + b43_phy_initb6(dev); + + if (phy->rev >= 2 || phy->gmode) + b43_phy_inita(dev); + + if (phy->rev >= 2) { + b43_phy_write(dev, B43_PHY_ANALOGOVER, 0); + b43_phy_write(dev, B43_PHY_ANALOGOVERVAL, 0); + } + if (phy->rev == 2) { + b43_phy_write(dev, B43_PHY_RFOVER, 0); + b43_phy_write(dev, B43_PHY_PGACTL, 0xC0); + } + if (phy->rev > 5) { + b43_phy_write(dev, B43_PHY_RFOVER, 0x400); + b43_phy_write(dev, B43_PHY_PGACTL, 0xC0); + } + if (phy->gmode || phy->rev >= 2) { + tmp = b43_phy_read(dev, B43_PHY_VERSION_OFDM); + tmp &= B43_PHYVER_VERSION; + if (tmp == 3 || tmp == 5) { + b43_phy_write(dev, B43_PHY_OFDM(0xC2), 0x1816); + b43_phy_write(dev, B43_PHY_OFDM(0xC3), 0x8006); } + if (tmp == 5) { + b43_phy_write(dev, B43_PHY_OFDM(0xCC), + (b43_phy_read(dev, B43_PHY_OFDM(0xCC)) + & 0x00FF) | 0x1F00); + } + } + if ((phy->rev <= 2 && phy->gmode) || phy->rev >= 2) + b43_phy_write(dev, B43_PHY_OFDM(0x7E), 0x78); + if (phy->radio_rev == 8) { + b43_phy_write(dev, B43_PHY_EXTG(0x01), + b43_phy_read(dev, B43_PHY_EXTG(0x01)) + | 0x80); + b43_phy_write(dev, B43_PHY_OFDM(0x3E), + b43_phy_read(dev, B43_PHY_OFDM(0x3E)) + | 0x4); + } + if (has_loopback_gain(phy)) + b43_calc_loopback_gain(dev); + + if (phy->radio_rev != 8) { + if (gphy->initval == 0xFFFF) + gphy->initval = b43_radio_init2050(dev); + else + b43_radio_write16(dev, 0x0078, gphy->initval); + } + b43_lo_g_init(dev); + if (has_tx_magnification(phy)) { + b43_radio_write16(dev, 0x52, + (b43_radio_read16(dev, 0x52) & 0xFF00) + | gphy->lo_control->tx_bias | gphy-> + lo_control->tx_magn); + } else { + b43_radio_write16(dev, 0x52, + (b43_radio_read16(dev, 0x52) & 0xFFF0) + | gphy->lo_control->tx_bias); + } + if (phy->rev >= 6) { + b43_phy_write(dev, B43_PHY_CCK(0x36), + (b43_phy_read(dev, B43_PHY_CCK(0x36)) + & 0x0FFF) | (gphy->lo_control-> + tx_bias << 12)); + } + if (dev->dev->bus->sprom.boardflags_lo & B43_BFL_PACTRL) + b43_phy_write(dev, B43_PHY_CCK(0x2E), 0x8075); + else + b43_phy_write(dev, B43_PHY_CCK(0x2E), 0x807F); + if (phy->rev < 2) + b43_phy_write(dev, B43_PHY_CCK(0x2F), 0x101); + else + b43_phy_write(dev, B43_PHY_CCK(0x2F), 0x202); + if (phy->gmode || phy->rev >= 2) { + b43_lo_g_adjust(dev); + b43_phy_write(dev, B43_PHY_LO_MASK, 0x8078); } - /* First we set the channel radio code to prevent the - * firmware from sending ghost packets. - */ - channelcookie = channel; - if (0 /*FIXME on 5Ghz */) - channelcookie |= 0x100; - //FIXME set 40Mhz flag if required - savedcookie = b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_CHAN); - b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_CHAN, channelcookie); - - switch (phy->type) { - case B43_PHYTYPE_A: - if (channel > 200) { - err = -EINVAL; - goto out; + if (!(dev->dev->bus->sprom.boardflags_lo & B43_BFL_RSSI)) { + /* The specs state to update the NRSSI LT with + * the value 0x7FFFFFFF here. I think that is some weird + * compiler optimization in the original driver. + * Essentially, what we do here is resetting all NRSSI LT + * entries to -32 (see the clamp_val() in nrssi_hw_update()) + */ + b43_nrssi_hw_update(dev, 0xFFFF); //FIXME? + b43_calc_nrssi_threshold(dev); + } else if (phy->gmode || phy->rev >= 2) { + if (gphy->nrssi[0] == -1000) { + B43_WARN_ON(gphy->nrssi[1] != -1000); + b43_calc_nrssi_slope(dev); + } else + b43_calc_nrssi_threshold(dev); + } + if (phy->radio_rev == 8) + b43_phy_write(dev, B43_PHY_EXTG(0x05), 0x3230); + b43_phy_init_pctl(dev); + /* FIXME: The spec says in the following if, the 0 should be replaced + 'if OFDM may not be used in the current locale' + but OFDM is legal everywhere */ + if ((dev->dev->bus->chip_id == 0x4306 + && dev->dev->bus->chip_package == 2) || 0) { + b43_phy_write(dev, B43_PHY_CRS0, b43_phy_read(dev, B43_PHY_CRS0) + & 0xBFFF); + b43_phy_write(dev, B43_PHY_OFDM(0xC3), + b43_phy_read(dev, B43_PHY_OFDM(0xC3)) + & 0x7FFF); + } +} + +void b43_gphy_channel_switch(struct b43_wldev *dev, + unsigned int channel, + bool synthetic_pu_workaround) +{ + if (synthetic_pu_workaround) + b43_synth_pu_workaround(dev, channel); + + b43_write16(dev, B43_MMIO_CHANNEL, channel2freq_bg(channel)); + + if (channel == 14) { + if (dev->dev->bus->sprom.country_code == + SSB_SPROM1CCODE_JAPAN) + b43_hf_write(dev, + b43_hf_read(dev) & ~B43_HF_ACPR); + else + b43_hf_write(dev, + b43_hf_read(dev) | B43_HF_ACPR); + b43_write16(dev, B43_MMIO_CHANNEL_EXT, + b43_read16(dev, B43_MMIO_CHANNEL_EXT) + | (1 << 11)); + } else { + b43_write16(dev, B43_MMIO_CHANNEL_EXT, + b43_read16(dev, B43_MMIO_CHANNEL_EXT) + & 0xF7BF); + } +} + +static void default_baseband_attenuation(struct b43_wldev *dev, + struct b43_bbatt *bb) +{ + struct b43_phy *phy = &dev->phy; + + if (phy->radio_ver == 0x2050 && phy->radio_rev < 6) + bb->att = 0; + else + bb->att = 2; +} + +static void default_radio_attenuation(struct b43_wldev *dev, + struct b43_rfatt *rf) +{ + struct ssb_bus *bus = dev->dev->bus; + struct b43_phy *phy = &dev->phy; + + rf->with_padmix = 0; + + if (bus->boardinfo.vendor == SSB_BOARDVENDOR_BCM && + bus->boardinfo.type == SSB_BOARD_BCM4309G) { + if (bus->boardinfo.rev < 0x43) { + rf->att = 2; + return; + } else if (bus->boardinfo.rev < 0x51) { + rf->att = 3; + return; } - freq = channel2freq_a(channel); - - r8 = b43_radio_read16(dev, 0x0008); - b43_write16(dev, 0x03F0, freq); - b43_radio_write16(dev, 0x0008, r8); - - //TODO: write max channel TX power? to Radio 0x2D - tmp = b43_radio_read16(dev, 0x002E); - tmp &= 0x0080; - //TODO: OR tmp with the Power out estimation for this channel? - b43_radio_write16(dev, 0x002E, tmp); - - if (freq >= 4920 && freq <= 5500) { - /* - * r8 = (((freq * 15 * 0xE1FC780F) >> 32) / 29) & 0x0F; - * = (freq * 0.025862069 - */ - r8 = 3 * freq / 116; /* is equal to r8 = freq * 0.025862 */ + } + + if (phy->type == B43_PHYTYPE_A) { + rf->att = 0x60; + return; + } + + switch (phy->radio_ver) { + case 0x2053: + switch (phy->radio_rev) { + case 1: + rf->att = 6; + return; } - b43_radio_write16(dev, 0x0007, (r8 << 4) | r8); - b43_radio_write16(dev, 0x0020, (r8 << 4) | r8); - b43_radio_write16(dev, 0x0021, (r8 << 4) | r8); - b43_radio_write16(dev, 0x0022, (b43_radio_read16(dev, 0x0022) - & 0x000F) | (r8 << 4)); - b43_radio_write16(dev, 0x002A, (r8 << 4)); - b43_radio_write16(dev, 0x002B, (r8 << 4)); - b43_radio_write16(dev, 0x0008, (b43_radio_read16(dev, 0x0008) - & 0x00F0) | (r8 << 4)); - b43_radio_write16(dev, 0x0029, (b43_radio_read16(dev, 0x0029) - & 0xFF0F) | 0x00B0); - b43_radio_write16(dev, 0x0035, 0x00AA); - b43_radio_write16(dev, 0x0036, 0x0085); - b43_radio_write16(dev, 0x003A, (b43_radio_read16(dev, 0x003A) - & 0xFF20) | - freq_r3A_value(freq)); - b43_radio_write16(dev, 0x003D, - b43_radio_read16(dev, 0x003D) & 0x00FF); - b43_radio_write16(dev, 0x0081, (b43_radio_read16(dev, 0x0081) - & 0xFF7F) | 0x0080); - b43_radio_write16(dev, 0x0035, - b43_radio_read16(dev, 0x0035) & 0xFFEF); - b43_radio_write16(dev, 0x0035, (b43_radio_read16(dev, 0x0035) - & 0xFFEF) | 0x0010); - b43_radio_set_tx_iq(dev); - //TODO: TSSI2dbm workaround - b43_phy_xmitpower(dev); //FIXME correct? break; - case B43_PHYTYPE_G: - if ((channel < 1) || (channel > 14)) { - err = -EINVAL; - goto out; + case 0x2050: + switch (phy->radio_rev) { + case 0: + rf->att = 5; + return; + case 1: + if (phy->type == B43_PHYTYPE_G) { + if (bus->boardinfo.vendor == SSB_BOARDVENDOR_BCM + && bus->boardinfo.type == SSB_BOARD_BCM4309G + && bus->boardinfo.rev >= 30) + rf->att = 3; + else if (bus->boardinfo.vendor == + SSB_BOARDVENDOR_BCM + && bus->boardinfo.type == + SSB_BOARD_BU4306) + rf->att = 3; + else + rf->att = 1; + } else { + if (bus->boardinfo.vendor == SSB_BOARDVENDOR_BCM + && bus->boardinfo.type == SSB_BOARD_BCM4309G + && bus->boardinfo.rev >= 30) + rf->att = 7; + else + rf->att = 6; + } + return; + case 2: + if (phy->type == B43_PHYTYPE_G) { + if (bus->boardinfo.vendor == SSB_BOARDVENDOR_BCM + && bus->boardinfo.type == SSB_BOARD_BCM4309G + && bus->boardinfo.rev >= 30) + rf->att = 3; + else if (bus->boardinfo.vendor == + SSB_BOARDVENDOR_BCM + && bus->boardinfo.type == + SSB_BOARD_BU4306) + rf->att = 5; + else if (bus->chip_id == 0x4320) + rf->att = 4; + else + rf->att = 3; + } else + rf->att = 6; + return; + case 3: + rf->att = 5; + return; + case 4: + case 5: + rf->att = 1; + return; + case 6: + case 7: + rf->att = 5; + return; + case 8: + rf->att = 0xA; + rf->with_padmix = 1; + return; + case 9: + default: + rf->att = 5; + return; } + } + rf->att = 5; +} - if (synthetic_pu_workaround) - b43_synth_pu_workaround(dev, channel); +static u16 default_tx_control(struct b43_wldev *dev) +{ + struct b43_phy *phy = &dev->phy; - b43_write16(dev, B43_MMIO_CHANNEL, channel2freq_bg(channel)); + if (phy->radio_ver != 0x2050) + return 0; + if (phy->radio_rev == 1) + return B43_TXCTL_PA2DB | B43_TXCTL_TXMIX; + if (phy->radio_rev < 6) + return B43_TXCTL_PA2DB; + if (phy->radio_rev == 8) + return B43_TXCTL_TXMIX; + return 0; +} - if (channel == 14) { - if (dev->dev->bus->sprom.country_code == - SSB_SPROM1CCODE_JAPAN) - b43_hf_write(dev, - b43_hf_read(dev) & ~B43_HF_ACPR); - else - b43_hf_write(dev, - b43_hf_read(dev) | B43_HF_ACPR); - b43_write16(dev, B43_MMIO_CHANNEL_EXT, - b43_read16(dev, B43_MMIO_CHANNEL_EXT) - | (1 << 11)); - } else { - b43_write16(dev, B43_MMIO_CHANNEL_EXT, - b43_read16(dev, B43_MMIO_CHANNEL_EXT) - & 0xF7BF); +static u8 b43_gphy_aci_detect(struct b43_wldev *dev, u8 channel) +{ + struct b43_phy *phy = &dev->phy; + struct b43_phy_g *gphy = phy->g; + u8 ret = 0; + u16 saved, rssi, temp; + int i, j = 0; + + saved = b43_phy_read(dev, 0x0403); + b43_switch_channel(dev, channel); + b43_phy_write(dev, 0x0403, (saved & 0xFFF8) | 5); + if (gphy->aci_hw_rssi) + rssi = b43_phy_read(dev, 0x048A) & 0x3F; + else + rssi = saved & 0x3F; + /* clamp temp to signed 5bit */ + if (rssi > 32) + rssi -= 64; + for (i = 0; i < 100; i++) { + temp = (b43_phy_read(dev, 0x047F) >> 8) & 0x3F; + if (temp > 32) + temp -= 64; + if (temp < rssi) + j++; + if (j >= 20) + ret = 1; + } + b43_phy_write(dev, 0x0403, saved); + + return ret; +} + +static u8 b43_gphy_aci_scan(struct b43_wldev *dev) +{ + struct b43_phy *phy = &dev->phy; + u8 ret[13]; + unsigned int channel = phy->channel; + unsigned int i, j, start, end; + + if (!((phy->type == B43_PHYTYPE_G) && (phy->rev > 0))) + return 0; + + b43_phy_lock(dev); + b43_radio_lock(dev); + b43_phy_write(dev, 0x0802, b43_phy_read(dev, 0x0802) & 0xFFFC); + b43_phy_write(dev, B43_PHY_G_CRS, + b43_phy_read(dev, B43_PHY_G_CRS) & 0x7FFF); + b43_set_all_gains(dev, 3, 8, 1); + + start = (channel - 5 > 0) ? channel - 5 : 1; + end = (channel + 5 < 14) ? channel + 5 : 13; + + for (i = start; i <= end; i++) { + if (abs(channel - i) > 2) + ret[i - 1] = b43_gphy_aci_detect(dev, i); + } + b43_switch_channel(dev, channel); + b43_phy_write(dev, 0x0802, + (b43_phy_read(dev, 0x0802) & 0xFFFC) | 0x0003); + b43_phy_write(dev, 0x0403, b43_phy_read(dev, 0x0403) & 0xFFF8); + b43_phy_write(dev, B43_PHY_G_CRS, + b43_phy_read(dev, B43_PHY_G_CRS) | 0x8000); + b43_set_original_gains(dev); + for (i = 0; i < 13; i++) { + if (!ret[i]) + continue; + end = (i + 5 < 13) ? i + 5 : 13; + for (j = i; j < end; j++) + ret[j] = 1; + } + b43_radio_unlock(dev); + b43_phy_unlock(dev); + + return ret[channel - 1]; +} + +static s32 b43_tssi2dbm_ad(s32 num, s32 den) +{ + if (num < 0) + return num / den; + else + return (num + den / 2) / den; +} + +static s8 b43_tssi2dbm_entry(s8 entry[], u8 index, + s16 pab0, s16 pab1, s16 pab2) +{ + s32 m1, m2, f = 256, q, delta; + s8 i = 0; + + m1 = b43_tssi2dbm_ad(16 * pab0 + index * pab1, 32); + m2 = max(b43_tssi2dbm_ad(32768 + index * pab2, 256), 1); + do { + if (i > 15) + return -EINVAL; + q = b43_tssi2dbm_ad(f * 4096 - + b43_tssi2dbm_ad(m2 * f, 16) * f, 2048); + delta = abs(q - f); + f = q; + i++; + } while (delta >= 2); + entry[index] = clamp_val(b43_tssi2dbm_ad(m1 * f, 8192), -127, 128); + return 0; +} + +u8 * b43_generate_dyn_tssi2dbm_tab(struct b43_wldev *dev, + s16 pab0, s16 pab1, s16 pab2) +{ + unsigned int i; + u8 *tab; + int err; + + tab = kmalloc(64, GFP_KERNEL); + if (!tab) { + b43err(dev->wl, "Could not allocate memory " + "for tssi2dbm table\n"); + return NULL; + } + for (i = 0; i < 64; i++) { + err = b43_tssi2dbm_entry(tab, i, pab0, pab1, pab2); + if (err) { + b43err(dev->wl, "Could not generate " + "tssi2dBm table\n"); + kfree(tab); + return NULL; } - break; - case B43_PHYTYPE_N: - err = b43_nphy_selectchannel(dev, channel); - if (err) - goto out; - break; - default: - B43_WARN_ON(1); } - phy->channel = channel; - /* Wait for the radio to tune to the channel and stabilize. */ - msleep(8); -out: - if (err) { - b43_shm_write16(dev, B43_SHM_SHARED, - B43_SHM_SH_CHAN, savedcookie); + return tab; +} + +/* Initialise the TSSI->dBm lookup table */ +static int b43_gphy_init_tssi2dbm_table(struct b43_wldev *dev) +{ + struct b43_phy *phy = &dev->phy; + struct b43_phy_g *gphy = phy->g; + s16 pab0, pab1, pab2; + + pab0 = (s16) (dev->dev->bus->sprom.pa0b0); + pab1 = (s16) (dev->dev->bus->sprom.pa0b1); + pab2 = (s16) (dev->dev->bus->sprom.pa0b2); + + B43_WARN_ON((dev->dev->bus->chip_id == 0x4301) && + (phy->radio_ver != 0x2050)); /* Not supported anymore */ + + gphy->dyn_tssi_tbl = 0; + + if (pab0 != 0 && pab1 != 0 && pab2 != 0 && + pab0 != -1 && pab1 != -1 && pab2 != -1) { + /* The pabX values are set in SPROM. Use them. */ + if ((s8) dev->dev->bus->sprom.itssi_bg != 0 && + (s8) dev->dev->bus->sprom.itssi_bg != -1) { + gphy->tgt_idle_tssi = + (s8) (dev->dev->bus->sprom.itssi_bg); + } else + gphy->tgt_idle_tssi = 62; + gphy->tssi2dbm = b43_generate_dyn_tssi2dbm_tab(dev, pab0, + pab1, pab2); + if (!gphy->tssi2dbm) + return -ENOMEM; + gphy->dyn_tssi_tbl = 1; + } else { + /* pabX values not set in SPROM. */ + gphy->tgt_idle_tssi = 52; + gphy->tssi2dbm = b43_tssi2dbm_g_table; } + + return 0; +} + +static int b43_gphy_op_allocate(struct b43_wldev *dev) +{ + struct b43_phy_g *gphy; + struct b43_txpower_lo_control *lo; + int err; + + gphy = kzalloc(sizeof(*gphy), GFP_KERNEL); + if (!gphy) { + err = -ENOMEM; + goto error; + } + dev->phy.g = gphy; + + lo = kzalloc(sizeof(*lo), GFP_KERNEL); + if (!lo) { + err = -ENOMEM; + goto err_free_gphy; + } + gphy->lo_control = lo; + + err = b43_gphy_init_tssi2dbm_table(dev); + if (err) + goto err_free_lo; + + return 0; + +err_free_lo: + kfree(lo); +err_free_gphy: + kfree(gphy); +error: return err; } -void b43_radio_turn_on(struct b43_wldev *dev) +static void b43_gphy_op_prepare_structs(struct b43_wldev *dev) { struct b43_phy *phy = &dev->phy; - int err; - u8 channel; + struct b43_phy_g *gphy = phy->g; + const void *tssi2dbm; + int tgt_idle_tssi; + struct b43_txpower_lo_control *lo; + unsigned int i; + + /* tssi2dbm table is constant, so it is initialized at alloc time. + * Save a copy of the pointer. */ + tssi2dbm = gphy->tssi2dbm; + tgt_idle_tssi = gphy->tgt_idle_tssi; + /* Save the LO pointer. */ + lo = gphy->lo_control; + + /* Zero out the whole PHY structure. */ + memset(gphy, 0, sizeof(*gphy)); + + /* Restore pointers. */ + gphy->tssi2dbm = tssi2dbm; + gphy->tgt_idle_tssi = tgt_idle_tssi; + gphy->lo_control = lo; + + memset(gphy->minlowsig, 0xFF, sizeof(gphy->minlowsig)); + + /* NRSSI */ + for (i = 0; i < ARRAY_SIZE(gphy->nrssi); i++) + gphy->nrssi[i] = -1000; + for (i = 0; i < ARRAY_SIZE(gphy->nrssi_lt); i++) + gphy->nrssi_lt[i] = i; + + gphy->lofcal = 0xFFFF; + gphy->initval = 0xFFFF; + + gphy->interfmode = B43_INTERFMODE_NONE; + + /* OFDM-table address caching. */ + gphy->ofdmtab_addr_direction = B43_OFDMTAB_DIRECTION_UNKNOWN; + + gphy->average_tssi = 0xFF; + + /* Local Osciallator structure */ + lo->tx_bias = 0xFF; + INIT_LIST_HEAD(&lo->calib_list); +} + +static void b43_gphy_op_free(struct b43_wldev *dev) +{ + struct b43_phy *phy = &dev->phy; + struct b43_phy_g *gphy = phy->g; + + kfree(gphy->lo_control); + + if (gphy->dyn_tssi_tbl) + kfree(gphy->tssi2dbm); + gphy->dyn_tssi_tbl = 0; + gphy->tssi2dbm = NULL; + + kfree(gphy); + dev->phy.g = NULL; +} + +static int b43_gphy_op_prepare_hardware(struct b43_wldev *dev) +{ + struct b43_phy *phy = &dev->phy; + struct b43_phy_g *gphy = phy->g; + struct b43_txpower_lo_control *lo = gphy->lo_control; + + B43_WARN_ON(phy->type != B43_PHYTYPE_G); + + default_baseband_attenuation(dev, &gphy->bbatt); + default_radio_attenuation(dev, &gphy->rfatt); + gphy->tx_control = (default_tx_control(dev) << 4); + generate_rfatt_list(dev, &lo->rfatt_list); + generate_bbatt_list(dev, &lo->bbatt_list); + + /* Commit previous writes */ + b43_read32(dev, B43_MMIO_MACCTL); + + if (phy->rev == 1) { + /* Workaround: Temporarly disable gmode through the early init + * phase, as the gmode stuff is not needed for phy rev 1 */ + phy->gmode = 0; + b43_wireless_core_reset(dev, 0); + b43_phy_initg(dev); + phy->gmode = 1; + b43_wireless_core_reset(dev, B43_TMSLOW_GMODE); + } + + return 0; +} + +static int b43_gphy_op_init(struct b43_wldev *dev) +{ + b43_phy_initg(dev); + + return 0; +} + +static void b43_gphy_op_exit(struct b43_wldev *dev) +{ + b43_lo_g_cleanup(dev); +} + +static u16 b43_gphy_op_read(struct b43_wldev *dev, u16 reg) +{ + b43_write16(dev, B43_MMIO_PHY_CONTROL, reg); + return b43_read16(dev, B43_MMIO_PHY_DATA); +} + +static void b43_gphy_op_write(struct b43_wldev *dev, u16 reg, u16 value) +{ + b43_write16(dev, B43_MMIO_PHY_CONTROL, reg); + b43_write16(dev, B43_MMIO_PHY_DATA, value); +} + +static u16 b43_gphy_op_radio_read(struct b43_wldev *dev, u16 reg) +{ + /* Register 1 is a 32-bit register. */ + B43_WARN_ON(reg == 1); + /* G-PHY needs 0x80 for read access. */ + reg |= 0x80; + + b43_write16(dev, B43_MMIO_RADIO_CONTROL, reg); + return b43_read16(dev, B43_MMIO_RADIO_DATA_LOW); +} + +static void b43_gphy_op_radio_write(struct b43_wldev *dev, u16 reg, u16 value) +{ + /* Register 1 is a 32-bit register. */ + B43_WARN_ON(reg == 1); + + b43_write16(dev, B43_MMIO_RADIO_CONTROL, reg); + b43_write16(dev, B43_MMIO_RADIO_DATA_LOW, value); +} + +static bool b43_gphy_op_supports_hwpctl(struct b43_wldev *dev) +{ + return (dev->phy.rev >= 6); +} + +static void b43_gphy_op_software_rfkill(struct b43_wldev *dev, + enum rfkill_state state) +{ + struct b43_phy *phy = &dev->phy; + struct b43_phy_g *gphy = phy->g; + unsigned int channel; might_sleep(); - if (phy->radio_on) - return; + if (state == RFKILL_STATE_UNBLOCKED) { + /* Turn radio ON */ + if (phy->radio_on) + return; - switch (phy->type) { - case B43_PHYTYPE_A: - b43_radio_write16(dev, 0x0004, 0x00C0); - b43_radio_write16(dev, 0x0005, 0x0008); - b43_phy_write(dev, 0x0010, b43_phy_read(dev, 0x0010) & 0xFFF7); - b43_phy_write(dev, 0x0011, b43_phy_read(dev, 0x0011) & 0xFFF7); - b43_radio_init2060(dev); - break; - case B43_PHYTYPE_B: - case B43_PHYTYPE_G: b43_phy_write(dev, 0x0015, 0x8000); b43_phy_write(dev, 0x0015, 0xCC00); b43_phy_write(dev, 0x0015, (phy->gmode ? 0x00C0 : 0x0000)); - if (phy->radio_off_context.valid) { + if (gphy->radio_off_context.valid) { /* Restore the RFover values. */ b43_phy_write(dev, B43_PHY_RFOVER, - phy->radio_off_context.rfover); + gphy->radio_off_context.rfover); b43_phy_write(dev, B43_PHY_RFOVERVAL, - phy->radio_off_context.rfoverval); - phy->radio_off_context.valid = 0; + gphy->radio_off_context.rfoverval); + gphy->radio_off_context.valid = 0; } channel = phy->channel; - err = b43_radio_selectchannel(dev, B43_DEFAULT_CHANNEL_BG, 1); - err |= b43_radio_selectchannel(dev, channel, 0); - B43_WARN_ON(err); - break; - case B43_PHYTYPE_N: - b43_nphy_radio_turn_on(dev); - break; - default: - B43_WARN_ON(1); + b43_gphy_channel_switch(dev, 6, 1); + b43_gphy_channel_switch(dev, channel, 0); + } else { + /* Turn radio OFF */ + u16 rfover, rfoverval; + + rfover = b43_phy_read(dev, B43_PHY_RFOVER); + rfoverval = b43_phy_read(dev, B43_PHY_RFOVERVAL); + gphy->radio_off_context.rfover = rfover; + gphy->radio_off_context.rfoverval = rfoverval; + gphy->radio_off_context.valid = 1; + b43_phy_write(dev, B43_PHY_RFOVER, rfover | 0x008C); + b43_phy_write(dev, B43_PHY_RFOVERVAL, rfoverval & 0xFF73); } - phy->radio_on = 1; } -void b43_radio_turn_off(struct b43_wldev *dev, bool force) +static int b43_gphy_op_switch_channel(struct b43_wldev *dev, + unsigned int new_channel) +{ + if ((new_channel < 1) || (new_channel > 14)) + return -EINVAL; + b43_gphy_channel_switch(dev, new_channel, 0); + + return 0; +} + +static unsigned int b43_gphy_op_get_default_chan(struct b43_wldev *dev) +{ + return 1; /* Default to channel 1 */ +} + +static void b43_gphy_op_set_rx_antenna(struct b43_wldev *dev, int antenna) { struct b43_phy *phy = &dev->phy; + u64 hf; + u16 tmp; + int autodiv = 0; - if (!phy->radio_on && !force) - return; + if (antenna == B43_ANTENNA_AUTO0 || antenna == B43_ANTENNA_AUTO1) + autodiv = 1; + + hf = b43_hf_read(dev); + hf &= ~B43_HF_ANTDIVHELP; + b43_hf_write(dev, hf); + + tmp = b43_phy_read(dev, B43_PHY_BBANDCFG); + tmp &= ~B43_PHY_BBANDCFG_RXANT; + tmp |= (autodiv ? B43_ANTENNA_AUTO0 : antenna) + << B43_PHY_BBANDCFG_RXANT_SHIFT; + b43_phy_write(dev, B43_PHY_BBANDCFG, tmp); + + if (autodiv) { + tmp = b43_phy_read(dev, B43_PHY_ANTDWELL); + if (antenna == B43_ANTENNA_AUTO0) + tmp &= ~B43_PHY_ANTDWELL_AUTODIV1; + else + tmp |= B43_PHY_ANTDWELL_AUTODIV1; + b43_phy_write(dev, B43_PHY_ANTDWELL, tmp); + } + tmp = b43_phy_read(dev, B43_PHY_ANTWRSETT); + if (autodiv) + tmp |= B43_PHY_ANTWRSETT_ARXDIV; + else + tmp &= ~B43_PHY_ANTWRSETT_ARXDIV; + b43_phy_write(dev, B43_PHY_ANTWRSETT, tmp); + if (phy->rev >= 2) { + tmp = b43_phy_read(dev, B43_PHY_OFDM61); + tmp |= B43_PHY_OFDM61_10; + b43_phy_write(dev, B43_PHY_OFDM61, tmp); + + tmp = + b43_phy_read(dev, B43_PHY_DIVSRCHGAINBACK); + tmp = (tmp & 0xFF00) | 0x15; + b43_phy_write(dev, B43_PHY_DIVSRCHGAINBACK, + tmp); + + if (phy->rev == 2) { + b43_phy_write(dev, B43_PHY_ADIVRELATED, + 8); + } else { + tmp = + b43_phy_read(dev, + B43_PHY_ADIVRELATED); + tmp = (tmp & 0xFF00) | 8; + b43_phy_write(dev, B43_PHY_ADIVRELATED, + tmp); + } + } + if (phy->rev >= 6) + b43_phy_write(dev, B43_PHY_OFDM9B, 0xDC); + + hf |= B43_HF_ANTDIVHELP; + b43_hf_write(dev, hf); +} - switch (phy->type) { - case B43_PHYTYPE_N: - b43_nphy_radio_turn_off(dev); +static int b43_gphy_op_interf_mitigation(struct b43_wldev *dev, + enum b43_interference_mitigation mode) +{ + struct b43_phy *phy = &dev->phy; + struct b43_phy_g *gphy = phy->g; + int currentmode; + + B43_WARN_ON(phy->type != B43_PHYTYPE_G); + if ((phy->rev == 0) || (!phy->gmode)) + return -ENODEV; + + gphy->aci_wlan_automatic = 0; + switch (mode) { + case B43_INTERFMODE_AUTOWLAN: + gphy->aci_wlan_automatic = 1; + if (gphy->aci_enable) + mode = B43_INTERFMODE_MANUALWLAN; + else + mode = B43_INTERFMODE_NONE; break; - case B43_PHYTYPE_A: - b43_radio_write16(dev, 0x0004, 0x00FF); - b43_radio_write16(dev, 0x0005, 0x00FB); - b43_phy_write(dev, 0x0010, b43_phy_read(dev, 0x0010) | 0x0008); - b43_phy_write(dev, 0x0011, b43_phy_read(dev, 0x0011) | 0x0008); + case B43_INTERFMODE_NONE: + case B43_INTERFMODE_NONWLAN: + case B43_INTERFMODE_MANUALWLAN: break; - case B43_PHYTYPE_G: { - u16 rfover, rfoverval; + default: + return -EINVAL; + } - rfover = b43_phy_read(dev, B43_PHY_RFOVER); - rfoverval = b43_phy_read(dev, B43_PHY_RFOVERVAL); - if (!force) { - phy->radio_off_context.rfover = rfover; - phy->radio_off_context.rfoverval = rfoverval; - phy->radio_off_context.valid = 1; + currentmode = gphy->interfmode; + if (currentmode == mode) + return 0; + if (currentmode != B43_INTERFMODE_NONE) + b43_radio_interference_mitigation_disable(dev, currentmode); + + if (mode == B43_INTERFMODE_NONE) { + gphy->aci_enable = 0; + gphy->aci_hw_rssi = 0; + } else + b43_radio_interference_mitigation_enable(dev, mode); + gphy->interfmode = mode; + + return 0; +} + +/* http://bcm-specs.sipsolutions.net/EstimatePowerOut + * This function converts a TSSI value to dBm in Q5.2 + */ +static s8 b43_gphy_estimate_power_out(struct b43_wldev *dev, s8 tssi) +{ + struct b43_phy_g *gphy = dev->phy.g; + s8 dbm; + s32 tmp; + + tmp = (gphy->tgt_idle_tssi - gphy->cur_idle_tssi + tssi); + tmp = clamp_val(tmp, 0x00, 0x3F); + dbm = gphy->tssi2dbm[tmp]; + + return dbm; +} + +static void b43_put_attenuation_into_ranges(struct b43_wldev *dev, + int *_bbatt, int *_rfatt) +{ + int rfatt = *_rfatt; + int bbatt = *_bbatt; + struct b43_txpower_lo_control *lo = dev->phy.g->lo_control; + + /* Get baseband and radio attenuation values into their permitted ranges. + * Radio attenuation affects power level 4 times as much as baseband. */ + + /* Range constants */ + const int rf_min = lo->rfatt_list.min_val; + const int rf_max = lo->rfatt_list.max_val; + const int bb_min = lo->bbatt_list.min_val; + const int bb_max = lo->bbatt_list.max_val; + + while (1) { + if (rfatt > rf_max && bbatt > bb_max - 4) + break; /* Can not get it into ranges */ + if (rfatt < rf_min && bbatt < bb_min + 4) + break; /* Can not get it into ranges */ + if (bbatt > bb_max && rfatt > rf_max - 1) + break; /* Can not get it into ranges */ + if (bbatt < bb_min && rfatt < rf_min + 1) + break; /* Can not get it into ranges */ + + if (bbatt > bb_max) { + bbatt -= 4; + rfatt += 1; + continue; + } + if (bbatt < bb_min) { + bbatt += 4; + rfatt -= 1; + continue; + } + if (rfatt > rf_max) { + rfatt -= 1; + bbatt += 4; + continue; + } + if (rfatt < rf_min) { + rfatt += 1; + bbatt -= 4; + continue; } - b43_phy_write(dev, B43_PHY_RFOVER, rfover | 0x008C); - b43_phy_write(dev, B43_PHY_RFOVERVAL, rfoverval & 0xFF73); break; } - default: - B43_WARN_ON(1); + + *_rfatt = clamp_val(rfatt, rf_min, rf_max); + *_bbatt = clamp_val(bbatt, bb_min, bb_max); +} + +static void b43_gphy_op_adjust_txpower(struct b43_wldev *dev) +{ + struct b43_phy *phy = &dev->phy; + struct b43_phy_g *gphy = phy->g; + int rfatt, bbatt; + u8 tx_control; + + spin_lock_irq(&dev->wl->irq_lock); + + /* Calculate the new attenuation values. */ + bbatt = gphy->bbatt.att; + bbatt += gphy->bbatt_delta; + rfatt = gphy->rfatt.att; + rfatt += gphy->rfatt_delta; + + b43_put_attenuation_into_ranges(dev, &bbatt, &rfatt); + tx_control = gphy->tx_control; + if ((phy->radio_ver == 0x2050) && (phy->radio_rev == 2)) { + if (rfatt <= 1) { + if (tx_control == 0) { + tx_control = + B43_TXCTL_PA2DB | + B43_TXCTL_TXMIX; + rfatt += 2; + bbatt += 2; + } else if (dev->dev->bus->sprom. + boardflags_lo & + B43_BFL_PACTRL) { + bbatt += 4 * (rfatt - 2); + rfatt = 2; + } + } else if (rfatt > 4 && tx_control) { + tx_control = 0; + if (bbatt < 3) { + rfatt -= 3; + bbatt += 2; + } else { + rfatt -= 2; + bbatt -= 2; + } + } } - phy->radio_on = 0; + /* Save the control values */ + gphy->tx_control = tx_control; + b43_put_attenuation_into_ranges(dev, &bbatt, &rfatt); + gphy->rfatt.att = rfatt; + gphy->bbatt.att = bbatt; + + /* We drop the lock early, so we can sleep during hardware + * adjustment. Possible races with op_recalc_txpower are harmless, + * as we will be called once again in case we raced. */ + spin_unlock_irq(&dev->wl->irq_lock); + + if (b43_debug(dev, B43_DBG_XMITPOWER)) + b43dbg(dev->wl, "Adjusting TX power\n"); + + /* Adjust the hardware */ + b43_phy_lock(dev); + b43_radio_lock(dev); + b43_set_txpower_g(dev, &gphy->bbatt, &gphy->rfatt, + gphy->tx_control); + b43_radio_unlock(dev); + b43_phy_unlock(dev); } + +static enum b43_txpwr_result b43_gphy_op_recalc_txpower(struct b43_wldev *dev, + bool ignore_tssi) +{ + struct b43_phy *phy = &dev->phy; + struct b43_phy_g *gphy = phy->g; + unsigned int average_tssi; + int cck_result, ofdm_result; + int estimated_pwr, desired_pwr, pwr_adjust; + int rfatt_delta, bbatt_delta; + unsigned int max_pwr; + + /* First get the average TSSI */ + cck_result = b43_phy_shm_tssi_read(dev, B43_SHM_SH_TSSI_CCK); + ofdm_result = b43_phy_shm_tssi_read(dev, B43_SHM_SH_TSSI_OFDM_G); + if ((cck_result < 0) && (ofdm_result < 0)) { + /* No TSSI information available */ + if (!ignore_tssi) + goto no_adjustment_needed; + cck_result = 0; + ofdm_result = 0; + } + if (cck_result < 0) + average_tssi = ofdm_result; + else if (ofdm_result < 0) + average_tssi = cck_result; + else + average_tssi = (cck_result + ofdm_result) / 2; + /* Merge the average with the stored value. */ + if (likely(gphy->average_tssi != 0xFF)) + average_tssi = (average_tssi + gphy->average_tssi) / 2; + gphy->average_tssi = average_tssi; + B43_WARN_ON(average_tssi >= B43_TSSI_MAX); + + /* Estimate the TX power emission based on the TSSI */ + estimated_pwr = b43_gphy_estimate_power_out(dev, average_tssi); + + B43_WARN_ON(phy->type != B43_PHYTYPE_G); + max_pwr = dev->dev->bus->sprom.maxpwr_bg; + if (dev->dev->bus->sprom.boardflags_lo & B43_BFL_PACTRL) + max_pwr -= 3; /* minus 0.75 */ + if (unlikely(max_pwr >= INT_TO_Q52(30/*dBm*/))) { + b43warn(dev->wl, + "Invalid max-TX-power value in SPROM.\n"); + max_pwr = INT_TO_Q52(20); /* fake it */ + dev->dev->bus->sprom.maxpwr_bg = max_pwr; + } + + /* Get desired power (in Q5.2) */ + if (phy->desired_txpower < 0) + desired_pwr = INT_TO_Q52(0); + else + desired_pwr = INT_TO_Q52(phy->desired_txpower); + /* And limit it. max_pwr already is Q5.2 */ + desired_pwr = clamp_val(desired_pwr, 0, max_pwr); + if (b43_debug(dev, B43_DBG_XMITPOWER)) { + b43dbg(dev->wl, + "[TX power] current = " Q52_FMT + " dBm, desired = " Q52_FMT + " dBm, max = " Q52_FMT "\n", + Q52_ARG(estimated_pwr), + Q52_ARG(desired_pwr), + Q52_ARG(max_pwr)); + } + + /* Calculate the adjustment delta. */ + pwr_adjust = desired_pwr - estimated_pwr; + if (pwr_adjust == 0) + goto no_adjustment_needed; + + /* RF attenuation delta. */ + rfatt_delta = ((pwr_adjust + 7) / 8); + /* Lower attenuation => Bigger power output. Negate it. */ + rfatt_delta = -rfatt_delta; + + /* Baseband attenuation delta. */ + bbatt_delta = pwr_adjust / 2; + /* Lower attenuation => Bigger power output. Negate it. */ + bbatt_delta = -bbatt_delta; + /* RF att affects power level 4 times as much as + * Baseband attennuation. Subtract it. */ + bbatt_delta -= 4 * rfatt_delta; + + if (b43_debug(dev, B43_DBG_XMITPOWER)) { + int dbm = pwr_adjust < 0 ? -pwr_adjust : pwr_adjust; + b43dbg(dev->wl, + "[TX power deltas] %s" Q52_FMT " dBm => " + "bbatt-delta = %d, rfatt-delta = %d\n", + (pwr_adjust < 0 ? "-" : ""), Q52_ARG(dbm), + bbatt_delta, rfatt_delta); + } + /* So do we finally need to adjust something in hardware? */ + if ((rfatt_delta == 0) && (bbatt_delta == 0)) + goto no_adjustment_needed; + + /* Save the deltas for later when we adjust the power. */ + gphy->bbatt_delta = bbatt_delta; + gphy->rfatt_delta = rfatt_delta; + + /* We need to adjust the TX power on the device. */ + return B43_TXPWR_RES_NEED_ADJUST; + +no_adjustment_needed: + return B43_TXPWR_RES_DONE; +} + +static void b43_gphy_op_pwork_15sec(struct b43_wldev *dev) +{ + struct b43_phy *phy = &dev->phy; + struct b43_phy_g *gphy = phy->g; + + //TODO: update_aci_moving_average + if (gphy->aci_enable && gphy->aci_wlan_automatic) { + b43_mac_suspend(dev); + if (!gphy->aci_enable && 1 /*TODO: not scanning? */ ) { + if (0 /*TODO: bunch of conditions */ ) { + phy->ops->interf_mitigation(dev, + B43_INTERFMODE_MANUALWLAN); + } + } else if (0 /*TODO*/) { + if (/*(aci_average > 1000) &&*/ !b43_gphy_aci_scan(dev)) + phy->ops->interf_mitigation(dev, B43_INTERFMODE_NONE); + } + b43_mac_enable(dev); + } else if (gphy->interfmode == B43_INTERFMODE_NONWLAN && + phy->rev == 1) { + //TODO: implement rev1 workaround + } + b43_lo_g_maintanance_work(dev); +} + +static void b43_gphy_op_pwork_60sec(struct b43_wldev *dev) +{ + struct b43_phy *phy = &dev->phy; + + if (!(dev->dev->bus->sprom.boardflags_lo & B43_BFL_RSSI)) + return; + + b43_mac_suspend(dev); + b43_calc_nrssi_slope(dev); + if ((phy->radio_ver == 0x2050) && (phy->radio_rev == 8)) { + u8 old_chan = phy->channel; + + /* VCO Calibration */ + if (old_chan >= 8) + b43_switch_channel(dev, 1); + else + b43_switch_channel(dev, 13); + b43_switch_channel(dev, old_chan); + } + b43_mac_enable(dev); +} + +const struct b43_phy_operations b43_phyops_g = { + .allocate = b43_gphy_op_allocate, + .free = b43_gphy_op_free, + .prepare_structs = b43_gphy_op_prepare_structs, + .prepare_hardware = b43_gphy_op_prepare_hardware, + .init = b43_gphy_op_init, + .exit = b43_gphy_op_exit, + .phy_read = b43_gphy_op_read, + .phy_write = b43_gphy_op_write, + .radio_read = b43_gphy_op_radio_read, + .radio_write = b43_gphy_op_radio_write, + .supports_hwpctl = b43_gphy_op_supports_hwpctl, + .software_rfkill = b43_gphy_op_software_rfkill, + .switch_analog = b43_phyop_switch_analog_generic, + .switch_channel = b43_gphy_op_switch_channel, + .get_default_chan = b43_gphy_op_get_default_chan, + .set_rx_antenna = b43_gphy_op_set_rx_antenna, + .interf_mitigation = b43_gphy_op_interf_mitigation, + .recalc_txpower = b43_gphy_op_recalc_txpower, + .adjust_txpower = b43_gphy_op_adjust_txpower, + .pwork_15sec = b43_gphy_op_pwork_15sec, + .pwork_60sec = b43_gphy_op_pwork_60sec, +}; diff --git a/drivers/net/wireless/b43/phy_g.h b/drivers/net/wireless/b43/phy_g.h new file mode 100644 index 00000000000..718947fd41a --- /dev/null +++ b/drivers/net/wireless/b43/phy_g.h @@ -0,0 +1,209 @@ +#ifndef LINUX_B43_PHY_G_H_ +#define LINUX_B43_PHY_G_H_ + +/* OFDM PHY registers are defined in the A-PHY header. */ +#include "phy_a.h" + +/* CCK (B) PHY Registers */ +#define B43_PHY_VERSION_CCK B43_PHY_CCK(0x00) /* Versioning register for B-PHY */ +#define B43_PHY_CCKBBANDCFG B43_PHY_CCK(0x01) /* Contains antenna 0/1 control bit */ +#define B43_PHY_PGACTL B43_PHY_CCK(0x15) /* PGA control */ +#define B43_PHY_PGACTL_LPF 0x1000 /* Low pass filter (?) */ +#define B43_PHY_PGACTL_LOWBANDW 0x0040 /* Low bandwidth flag */ +#define B43_PHY_PGACTL_UNKNOWN 0xEFA0 +#define B43_PHY_FBCTL1 B43_PHY_CCK(0x18) /* Frequency bandwidth control 1 */ +#define B43_PHY_ITSSI B43_PHY_CCK(0x29) /* Idle TSSI */ +#define B43_PHY_LO_LEAKAGE B43_PHY_CCK(0x2D) /* Measured LO leakage */ +#define B43_PHY_ENERGY B43_PHY_CCK(0x33) /* Energy */ +#define B43_PHY_SYNCCTL B43_PHY_CCK(0x35) +#define B43_PHY_FBCTL2 B43_PHY_CCK(0x38) /* Frequency bandwidth control 2 */ +#define B43_PHY_DACCTL B43_PHY_CCK(0x60) /* DAC control */ +#define B43_PHY_RCCALOVER B43_PHY_CCK(0x78) /* RC calibration override */ + +/* Extended G-PHY Registers */ +#define B43_PHY_CLASSCTL B43_PHY_EXTG(0x02) /* Classify control */ +#define B43_PHY_GTABCTL B43_PHY_EXTG(0x03) /* G-PHY table control (see below) */ +#define B43_PHY_GTABOFF 0x03FF /* G-PHY table offset (see below) */ +#define B43_PHY_GTABNR 0xFC00 /* G-PHY table number (see below) */ +#define B43_PHY_GTABNR_SHIFT 10 +#define B43_PHY_GTABDATA B43_PHY_EXTG(0x04) /* G-PHY table data */ +#define B43_PHY_LO_MASK B43_PHY_EXTG(0x0F) /* Local Oscillator control mask */ +#define B43_PHY_LO_CTL B43_PHY_EXTG(0x10) /* Local Oscillator control */ +#define B43_PHY_RFOVER B43_PHY_EXTG(0x11) /* RF override */ +#define B43_PHY_RFOVERVAL B43_PHY_EXTG(0x12) /* RF override value */ +#define B43_PHY_RFOVERVAL_EXTLNA 0x8000 +#define B43_PHY_RFOVERVAL_LNA 0x7000 +#define B43_PHY_RFOVERVAL_LNA_SHIFT 12 +#define B43_PHY_RFOVERVAL_PGA 0x0F00 +#define B43_PHY_RFOVERVAL_PGA_SHIFT 8 +#define B43_PHY_RFOVERVAL_UNK 0x0010 /* Unknown, always set. */ +#define B43_PHY_RFOVERVAL_TRSWRX 0x00E0 +#define B43_PHY_RFOVERVAL_BW 0x0003 /* Bandwidth flags */ +#define B43_PHY_RFOVERVAL_BW_LPF 0x0001 /* Low Pass Filter */ +#define B43_PHY_RFOVERVAL_BW_LBW 0x0002 /* Low Bandwidth (when set), high when unset */ +#define B43_PHY_ANALOGOVER B43_PHY_EXTG(0x14) /* Analog override */ +#define B43_PHY_ANALOGOVERVAL B43_PHY_EXTG(0x15) /* Analog override value */ + + +/*** G-PHY table numbers */ +#define B43_GTAB(number, offset) (((number) << B43_PHY_GTABNR_SHIFT) | (offset)) +#define B43_GTAB_NRSSI B43_GTAB(0x00, 0) +#define B43_GTAB_TRFEMW B43_GTAB(0x0C, 0x120) +#define B43_GTAB_ORIGTR B43_GTAB(0x2E, 0x298) + +u16 b43_gtab_read(struct b43_wldev *dev, u16 table, u16 offset); +void b43_gtab_write(struct b43_wldev *dev, u16 table, u16 offset, u16 value); + + +/* Returns the boolean whether "TX Magnification" is enabled. */ +#define has_tx_magnification(phy) \ + (((phy)->rev >= 2) && \ + ((phy)->radio_ver == 0x2050) && \ + ((phy)->radio_rev == 8)) +/* Card uses the loopback gain stuff */ +#define has_loopback_gain(phy) \ + (((phy)->rev > 1) || ((phy)->gmode)) + +/* Radio Attenuation (RF Attenuation) */ +struct b43_rfatt { + u8 att; /* Attenuation value */ + bool with_padmix; /* Flag, PAD Mixer enabled. */ +}; +struct b43_rfatt_list { + /* Attenuation values list */ + const struct b43_rfatt *list; + u8 len; + /* Minimum/Maximum attenuation values */ + u8 min_val; + u8 max_val; +}; + +/* Returns true, if the values are the same. */ +static inline bool b43_compare_rfatt(const struct b43_rfatt *a, + const struct b43_rfatt *b) +{ + return ((a->att == b->att) && + (a->with_padmix == b->with_padmix)); +} + +/* Baseband Attenuation */ +struct b43_bbatt { + u8 att; /* Attenuation value */ +}; +struct b43_bbatt_list { + /* Attenuation values list */ + const struct b43_bbatt *list; + u8 len; + /* Minimum/Maximum attenuation values */ + u8 min_val; + u8 max_val; +}; + +/* Returns true, if the values are the same. */ +static inline bool b43_compare_bbatt(const struct b43_bbatt *a, + const struct b43_bbatt *b) +{ + return (a->att == b->att); +} + +/* tx_control bits. */ +#define B43_TXCTL_PA3DB 0x40 /* PA Gain 3dB */ +#define B43_TXCTL_PA2DB 0x20 /* PA Gain 2dB */ +#define B43_TXCTL_TXMIX 0x10 /* TX Mixer Gain */ + +struct b43_txpower_lo_control; + +struct b43_phy_g { + /* ACI (adjacent channel interference) flags. */ + bool aci_enable; + bool aci_wlan_automatic; + bool aci_hw_rssi; + + /* Radio switched on/off */ + bool radio_on; + struct { + /* Values saved when turning the radio off. + * They are needed when turning it on again. */ + bool valid; + u16 rfover; + u16 rfoverval; + } radio_off_context; + + u16 minlowsig[2]; + u16 minlowsigpos[2]; + + /* Pointer to the table used to convert a + * TSSI value to dBm-Q5.2 */ + const s8 *tssi2dbm; + /* tssi2dbm is kmalloc()ed. Only used for free()ing. */ + bool dyn_tssi_tbl; + /* Target idle TSSI */ + int tgt_idle_tssi; + /* Current idle TSSI */ + int cur_idle_tssi; + /* The current average TSSI. + * Needs irq_lock, as it's updated in the IRQ path. */ + u8 average_tssi; + /* Current TX power level attenuation control values */ + struct b43_bbatt bbatt; + struct b43_rfatt rfatt; + u8 tx_control; /* B43_TXCTL_XXX */ + /* The calculated attenuation deltas that are used later + * when adjusting the actual power output. */ + int bbatt_delta; + int rfatt_delta; + + /* LocalOscillator control values. */ + struct b43_txpower_lo_control *lo_control; + /* Values from b43_calc_loopback_gain() */ + s16 max_lb_gain; /* Maximum Loopback gain in hdB */ + s16 trsw_rx_gain; /* TRSW RX gain in hdB */ + s16 lna_lod_gain; /* LNA lod */ + s16 lna_gain; /* LNA */ + s16 pga_gain; /* PGA */ + + /* Current Interference Mitigation mode */ + int interfmode; + /* Stack of saved values from the Interference Mitigation code. + * Each value in the stack is layed out as follows: + * bit 0-11: offset + * bit 12-15: register ID + * bit 16-32: value + * register ID is: 0x1 PHY, 0x2 Radio, 0x3 ILT + */ +#define B43_INTERFSTACK_SIZE 26 + u32 interfstack[B43_INTERFSTACK_SIZE]; //FIXME: use a data structure + + /* Saved values from the NRSSI Slope calculation */ + s16 nrssi[2]; + s32 nrssislope; + /* In memory nrssi lookup table. */ + s8 nrssi_lt[64]; + + u16 lofcal; + + u16 initval; //FIXME rename? + + /* The device does address auto increment for the OFDM tables. + * We cache the previously used address here and omit the address + * write on the next table access, if possible. */ + u16 ofdmtab_addr; /* The address currently set in hardware. */ + enum { /* The last data flow direction. */ + B43_OFDMTAB_DIRECTION_UNKNOWN = 0, + B43_OFDMTAB_DIRECTION_READ, + B43_OFDMTAB_DIRECTION_WRITE, + } ofdmtab_addr_direction; +}; + +void b43_gphy_set_baseband_attenuation(struct b43_wldev *dev, + u16 baseband_attenuation); +void b43_gphy_channel_switch(struct b43_wldev *dev, + unsigned int channel, + bool synthetic_pu_workaround); +u8 * b43_generate_dyn_tssi2dbm_tab(struct b43_wldev *dev, + s16 pab0, s16 pab1, s16 pab2); + +struct b43_phy_operations; +extern const struct b43_phy_operations b43_phyops_g; + +#endif /* LINUX_B43_PHY_G_H_ */ diff --git a/drivers/net/wireless/b43/phy_lp.c b/drivers/net/wireless/b43/phy_lp.c new file mode 100644 index 00000000000..c5d9dc3667c --- /dev/null +++ b/drivers/net/wireless/b43/phy_lp.c @@ -0,0 +1,155 @@ +/* + + Broadcom B43 wireless driver + IEEE 802.11g LP-PHY driver + + Copyright (c) 2008 Michael Buesch <mb@bu3sch.de> + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; see the file COPYING. If not, write to + the Free Software Foundation, Inc., 51 Franklin Steet, Fifth Floor, + Boston, MA 02110-1301, USA. + +*/ + +#include "b43.h" +#include "phy_lp.h" +#include "phy_common.h" + + +static int b43_lpphy_op_allocate(struct b43_wldev *dev) +{ + struct b43_phy_lp *lpphy; + + lpphy = kzalloc(sizeof(*lpphy), GFP_KERNEL); + if (!lpphy) + return -ENOMEM; + dev->phy.lp = lpphy; + + return 0; +} + +static void b43_lpphy_op_prepare_structs(struct b43_wldev *dev) +{ + struct b43_phy *phy = &dev->phy; + struct b43_phy_lp *lpphy = phy->lp; + + memset(lpphy, 0, sizeof(*lpphy)); + + //TODO +} + +static void b43_lpphy_op_free(struct b43_wldev *dev) +{ + struct b43_phy_lp *lpphy = dev->phy.lp; + + kfree(lpphy); + dev->phy.lp = NULL; +} + +static int b43_lpphy_op_init(struct b43_wldev *dev) +{ + //TODO + + return 0; +} + +static u16 b43_lpphy_op_read(struct b43_wldev *dev, u16 reg) +{ + b43_write16(dev, B43_MMIO_PHY_CONTROL, reg); + return b43_read16(dev, B43_MMIO_PHY_DATA); +} + +static void b43_lpphy_op_write(struct b43_wldev *dev, u16 reg, u16 value) +{ + b43_write16(dev, B43_MMIO_PHY_CONTROL, reg); + b43_write16(dev, B43_MMIO_PHY_DATA, value); +} + +static u16 b43_lpphy_op_radio_read(struct b43_wldev *dev, u16 reg) +{ + /* Register 1 is a 32-bit register. */ + B43_WARN_ON(reg == 1); + /* LP-PHY needs a special bit set for read access */ + if (dev->phy.rev < 2) { + if (reg != 0x4001) + reg |= 0x100; + } else + reg |= 0x200; + + b43_write16(dev, B43_MMIO_RADIO_CONTROL, reg); + return b43_read16(dev, B43_MMIO_RADIO_DATA_LOW); +} + +static void b43_lpphy_op_radio_write(struct b43_wldev *dev, u16 reg, u16 value) +{ + /* Register 1 is a 32-bit register. */ + B43_WARN_ON(reg == 1); + + b43_write16(dev, B43_MMIO_RADIO_CONTROL, reg); + b43_write16(dev, B43_MMIO_RADIO_DATA_LOW, value); +} + +static void b43_lpphy_op_software_rfkill(struct b43_wldev *dev, + enum rfkill_state state) +{ + //TODO +} + +static int b43_lpphy_op_switch_channel(struct b43_wldev *dev, + unsigned int new_channel) +{ + //TODO + return 0; +} + +static unsigned int b43_lpphy_op_get_default_chan(struct b43_wldev *dev) +{ + return 1; /* Default to channel 1 */ +} + +static void b43_lpphy_op_set_rx_antenna(struct b43_wldev *dev, int antenna) +{ + //TODO +} + +static void b43_lpphy_op_adjust_txpower(struct b43_wldev *dev) +{ + //TODO +} + +static enum b43_txpwr_result b43_lpphy_op_recalc_txpower(struct b43_wldev *dev, + bool ignore_tssi) +{ + //TODO + return B43_TXPWR_RES_DONE; +} + + +const struct b43_phy_operations b43_phyops_lp = { + .allocate = b43_lpphy_op_allocate, + .free = b43_lpphy_op_free, + .prepare_structs = b43_lpphy_op_prepare_structs, + .init = b43_lpphy_op_init, + .phy_read = b43_lpphy_op_read, + .phy_write = b43_lpphy_op_write, + .radio_read = b43_lpphy_op_radio_read, + .radio_write = b43_lpphy_op_radio_write, + .software_rfkill = b43_lpphy_op_software_rfkill, + .switch_analog = b43_phyop_switch_analog_generic, + .switch_channel = b43_lpphy_op_switch_channel, + .get_default_chan = b43_lpphy_op_get_default_chan, + .set_rx_antenna = b43_lpphy_op_set_rx_antenna, + .recalc_txpower = b43_lpphy_op_recalc_txpower, + .adjust_txpower = b43_lpphy_op_adjust_txpower, +}; diff --git a/drivers/net/wireless/b43/phy_lp.h b/drivers/net/wireless/b43/phy_lp.h new file mode 100644 index 00000000000..b0b5357abf9 --- /dev/null +++ b/drivers/net/wireless/b43/phy_lp.h @@ -0,0 +1,540 @@ +#ifndef LINUX_B43_PHY_LP_H_ +#define LINUX_B43_PHY_LP_H_ + +/* Definitions for the LP-PHY */ + + + + +#define B43_LP_RADIO(radio_reg) (radio_reg) +#define B43_LP_NORTH(radio_reg) B43_LP_RADIO(radio_reg) +#define B43_LP_SOUTH(radio_reg) B43_LP_RADIO((radio_reg) | 0x4000) + + +/*** Broadcom 2062 NORTH radio registers ***/ +#define B2062_N_COMM1 B43_LP_NORTH(0x000) /* Common 01 (north) */ +#define B2062_N_COMM2 B43_LP_NORTH(0x002) /* Common 02 (north) */ +#define B2062_N_COMM3 B43_LP_NORTH(0x003) /* Common 03 (north) */ +#define B2062_N_COMM4 B43_LP_NORTH(0x004) /* Common 04 (north) */ +#define B2062_N_COMM5 B43_LP_NORTH(0x005) /* Common 05 (north) */ +#define B2062_N_COMM6 B43_LP_NORTH(0x006) /* Common 06 (north) */ +#define B2062_N_COMM7 B43_LP_NORTH(0x007) /* Common 07 (north) */ +#define B2062_N_COMM8 B43_LP_NORTH(0x008) /* Common 08 (north) */ +#define B2062_N_COMM9 B43_LP_NORTH(0x009) /* Common 09 (north) */ +#define B2062_N_COMM10 B43_LP_NORTH(0x00A) /* Common 10 (north) */ +#define B2062_N_COMM11 B43_LP_NORTH(0x00B) /* Common 11 (north) */ +#define B2062_N_COMM12 B43_LP_NORTH(0x00C) /* Common 12 (north) */ +#define B2062_N_COMM13 B43_LP_NORTH(0x00D) /* Common 13 (north) */ +#define B2062_N_COMM14 B43_LP_NORTH(0x00E) /* Common 14 (north) */ +#define B2062_N_COMM15 B43_LP_NORTH(0x00F) /* Common 15 (north) */ +#define B2062_N_PDN_CTL0 B43_LP_NORTH(0x010) /* PDN Control 0 (north) */ +#define B2062_N_PDN_CTL1 B43_LP_NORTH(0x011) /* PDN Control 1 (north) */ +#define B2062_N_PDN_CTL2 B43_LP_NORTH(0x012) /* PDN Control 2 (north) */ +#define B2062_N_PDN_CTL3 B43_LP_NORTH(0x013) /* PDN Control 3 (north) */ +#define B2062_N_PDN_CTL4 B43_LP_NORTH(0x014) /* PDN Control 4 (north) */ +#define B2062_N_GEN_CTL0 B43_LP_NORTH(0x015) /* GEN Control 0 (north) */ +#define B2062_N_IQ_CALIB B43_LP_NORTH(0x016) /* IQ Calibration (north) */ +#define B2062_N_LGENC B43_LP_NORTH(0x017) /* LGENC (north) */ +#define B2062_N_LGENA_LPF B43_LP_NORTH(0x018) /* LGENA LPF (north) */ +#define B2062_N_LGENA_BIAS0 B43_LP_NORTH(0x019) /* LGENA Bias 0 (north) */ +#define B2062_N_LGNEA_BIAS1 B43_LP_NORTH(0x01A) /* LGNEA Bias 1 (north) */ +#define B2062_N_LGENA_CTL0 B43_LP_NORTH(0x01B) /* LGENA Control 0 (north) */ +#define B2062_N_LGENA_CTL1 B43_LP_NORTH(0x01C) /* LGENA Control 1 (north) */ +#define B2062_N_LGENA_CTL2 B43_LP_NORTH(0x01D) /* LGENA Control 2 (north) */ +#define B2062_N_LGENA_TUNE0 B43_LP_NORTH(0x01E) /* LGENA Tune 0 (north) */ +#define B2062_N_LGENA_TUNE1 B43_LP_NORTH(0x01F) /* LGENA Tune 1 (north) */ +#define B2062_N_LGENA_TUNE2 B43_LP_NORTH(0x020) /* LGENA Tune 2 (north) */ +#define B2062_N_LGENA_TUNE3 B43_LP_NORTH(0x021) /* LGENA Tune 3 (north) */ +#define B2062_N_LGENA_CTL3 B43_LP_NORTH(0x022) /* LGENA Control 3 (north) */ +#define B2062_N_LGENA_CTL4 B43_LP_NORTH(0x023) /* LGENA Control 4 (north) */ +#define B2062_N_LGENA_CTL5 B43_LP_NORTH(0x024) /* LGENA Control 5 (north) */ +#define B2062_N_LGENA_CTL6 B43_LP_NORTH(0x025) /* LGENA Control 6 (north) */ +#define B2062_N_LGENA_CTL7 B43_LP_NORTH(0x026) /* LGENA Control 7 (north) */ +#define B2062_N_RXA_CTL0 B43_LP_NORTH(0x027) /* RXA Control 0 (north) */ +#define B2062_N_RXA_CTL1 B43_LP_NORTH(0x028) /* RXA Control 1 (north) */ +#define B2062_N_RXA_CTL2 B43_LP_NORTH(0x029) /* RXA Control 2 (north) */ +#define B2062_N_RXA_CTL3 B43_LP_NORTH(0x02A) /* RXA Control 3 (north) */ +#define B2062_N_RXA_CTL4 B43_LP_NORTH(0x02B) /* RXA Control 4 (north) */ +#define B2062_N_RXA_CTL5 B43_LP_NORTH(0x02C) /* RXA Control 5 (north) */ +#define B2062_N_RXA_CTL6 B43_LP_NORTH(0x02D) /* RXA Control 6 (north) */ +#define B2062_N_RXA_CTL7 B43_LP_NORTH(0x02E) /* RXA Control 7 (north) */ +#define B2062_N_RXBB_CTL0 B43_LP_NORTH(0x02F) /* RXBB Control 0 (north) */ +#define B2062_N_RXBB_CTL1 B43_LP_NORTH(0x030) /* RXBB Control 1 (north) */ +#define B2062_N_RXBB_CTL2 B43_LP_NORTH(0x031) /* RXBB Control 2 (north) */ +#define B2062_N_RXBB_GAIN0 B43_LP_NORTH(0x032) /* RXBB Gain 0 (north) */ +#define B2062_N_RXBB_GAIN1 B43_LP_NORTH(0x033) /* RXBB Gain 1 (north) */ +#define B2062_N_RXBB_GAIN2 B43_LP_NORTH(0x034) /* RXBB Gain 2 (north) */ +#define B2062_N_RXBB_GAIN3 B43_LP_NORTH(0x035) /* RXBB Gain 3 (north) */ +#define B2062_N_RXBB_RSSI0 B43_LP_NORTH(0x036) /* RXBB RSSI 0 (north) */ +#define B2062_N_RXBB_RSSI1 B43_LP_NORTH(0x037) /* RXBB RSSI 1 (north) */ +#define B2062_N_RXBB_CALIB0 B43_LP_NORTH(0x038) /* RXBB Calibration0 (north) */ +#define B2062_N_RXBB_CALIB1 B43_LP_NORTH(0x039) /* RXBB Calibration1 (north) */ +#define B2062_N_RXBB_CALIB2 B43_LP_NORTH(0x03A) /* RXBB Calibration2 (north) */ +#define B2062_N_RXBB_BIAS0 B43_LP_NORTH(0x03B) /* RXBB Bias 0 (north) */ +#define B2062_N_RXBB_BIAS1 B43_LP_NORTH(0x03C) /* RXBB Bias 1 (north) */ +#define B2062_N_RXBB_BIAS2 B43_LP_NORTH(0x03D) /* RXBB Bias 2 (north) */ +#define B2062_N_RXBB_BIAS3 B43_LP_NORTH(0x03E) /* RXBB Bias 3 (north) */ +#define B2062_N_RXBB_BIAS4 B43_LP_NORTH(0x03F) /* RXBB Bias 4 (north) */ +#define B2062_N_RXBB_BIAS5 B43_LP_NORTH(0x040) /* RXBB Bias 5 (north) */ +#define B2062_N_RXBB_RSSI2 B43_LP_NORTH(0x041) /* RXBB RSSI 2 (north) */ +#define B2062_N_RXBB_RSSI3 B43_LP_NORTH(0x042) /* RXBB RSSI 3 (north) */ +#define B2062_N_RXBB_RSSI4 B43_LP_NORTH(0x043) /* RXBB RSSI 4 (north) */ +#define B2062_N_RXBB_RSSI5 B43_LP_NORTH(0x044) /* RXBB RSSI 5 (north) */ +#define B2062_N_TX_CTL0 B43_LP_NORTH(0x045) /* TX Control 0 (north) */ +#define B2062_N_TX_CTL1 B43_LP_NORTH(0x046) /* TX Control 1 (north) */ +#define B2062_N_TX_CTL2 B43_LP_NORTH(0x047) /* TX Control 2 (north) */ +#define B2062_N_TX_CTL3 B43_LP_NORTH(0x048) /* TX Control 3 (north) */ +#define B2062_N_TX_CTL4 B43_LP_NORTH(0x049) /* TX Control 4 (north) */ +#define B2062_N_TX_CTL5 B43_LP_NORTH(0x04A) /* TX Control 5 (north) */ +#define B2062_N_TX_CTL6 B43_LP_NORTH(0x04B) /* TX Control 6 (north) */ +#define B2062_N_TX_CTL7 B43_LP_NORTH(0x04C) /* TX Control 7 (north) */ +#define B2062_N_TX_CTL8 B43_LP_NORTH(0x04D) /* TX Control 8 (north) */ +#define B2062_N_TX_CTL9 B43_LP_NORTH(0x04E) /* TX Control 9 (north) */ +#define B2062_N_TX_CTL_A B43_LP_NORTH(0x04F) /* TX Control A (north) */ +#define B2062_N_TX_GC2G B43_LP_NORTH(0x050) /* TX GC2G (north) */ +#define B2062_N_TX_GC5G B43_LP_NORTH(0x051) /* TX GC5G (north) */ +#define B2062_N_TX_TUNE B43_LP_NORTH(0x052) /* TX Tune (north) */ +#define B2062_N_TX_PAD B43_LP_NORTH(0x053) /* TX PAD (north) */ +#define B2062_N_TX_PGA B43_LP_NORTH(0x054) /* TX PGA (north) */ +#define B2062_N_TX_PADAUX B43_LP_NORTH(0x055) /* TX PADAUX (north) */ +#define B2062_N_TX_PGAAUX B43_LP_NORTH(0x056) /* TX PGAAUX (north) */ +#define B2062_N_TSSI_CTL0 B43_LP_NORTH(0x057) /* TSSI Control 0 (north) */ +#define B2062_N_TSSI_CTL1 B43_LP_NORTH(0x058) /* TSSI Control 1 (north) */ +#define B2062_N_TSSI_CTL2 B43_LP_NORTH(0x059) /* TSSI Control 2 (north) */ +#define B2062_N_IQ_CALIB_CTL0 B43_LP_NORTH(0x05A) /* IQ Calibration Control 0 (north) */ +#define B2062_N_IQ_CALIB_CTL1 B43_LP_NORTH(0x05B) /* IQ Calibration Control 1 (north) */ +#define B2062_N_IQ_CALIB_CTL2 B43_LP_NORTH(0x05C) /* IQ Calibration Control 2 (north) */ +#define B2062_N_CALIB_TS B43_LP_NORTH(0x05D) /* Calibration TS (north) */ +#define B2062_N_CALIB_CTL0 B43_LP_NORTH(0x05E) /* Calibration Control 0 (north) */ +#define B2062_N_CALIB_CTL1 B43_LP_NORTH(0x05F) /* Calibration Control 1 (north) */ +#define B2062_N_CALIB_CTL2 B43_LP_NORTH(0x060) /* Calibration Control 2 (north) */ +#define B2062_N_CALIB_CTL3 B43_LP_NORTH(0x061) /* Calibration Control 3 (north) */ +#define B2062_N_CALIB_CTL4 B43_LP_NORTH(0x062) /* Calibration Control 4 (north) */ +#define B2062_N_CALIB_DBG0 B43_LP_NORTH(0x063) /* Calibration Debug 0 (north) */ +#define B2062_N_CALIB_DBG1 B43_LP_NORTH(0x064) /* Calibration Debug 1 (north) */ +#define B2062_N_CALIB_DBG2 B43_LP_NORTH(0x065) /* Calibration Debug 2 (north) */ +#define B2062_N_CALIB_DBG3 B43_LP_NORTH(0x066) /* Calibration Debug 3 (north) */ +#define B2062_N_PSENSE_CTL0 B43_LP_NORTH(0x069) /* PSENSE Control 0 (north) */ +#define B2062_N_PSENSE_CTL1 B43_LP_NORTH(0x06A) /* PSENSE Control 1 (north) */ +#define B2062_N_PSENSE_CTL2 B43_LP_NORTH(0x06B) /* PSENSE Control 2 (north) */ +#define B2062_N_TEST_BUF0 B43_LP_NORTH(0x06C) /* TEST BUF0 (north) */ + +/*** Broadcom 2062 SOUTH radio registers ***/ +#define B2062_S_COMM1 B43_LP_SOUTH(0x000) /* Common 01 (south) */ +#define B2062_S_RADIO_ID_CODE B43_LP_SOUTH(0x001) /* Radio ID code (south) */ +#define B2062_S_COMM2 B43_LP_SOUTH(0x002) /* Common 02 (south) */ +#define B2062_S_COMM3 B43_LP_SOUTH(0x003) /* Common 03 (south) */ +#define B2062_S_COMM4 B43_LP_SOUTH(0x004) /* Common 04 (south) */ +#define B2062_S_COMM5 B43_LP_SOUTH(0x005) /* Common 05 (south) */ +#define B2062_S_COMM6 B43_LP_SOUTH(0x006) /* Common 06 (south) */ +#define B2062_S_COMM7 B43_LP_SOUTH(0x007) /* Common 07 (south) */ +#define B2062_S_COMM8 B43_LP_SOUTH(0x008) /* Common 08 (south) */ +#define B2062_S_COMM9 B43_LP_SOUTH(0x009) /* Common 09 (south) */ +#define B2062_S_COMM10 B43_LP_SOUTH(0x00A) /* Common 10 (south) */ +#define B2062_S_COMM11 B43_LP_SOUTH(0x00B) /* Common 11 (south) */ +#define B2062_S_COMM12 B43_LP_SOUTH(0x00C) /* Common 12 (south) */ +#define B2062_S_COMM13 B43_LP_SOUTH(0x00D) /* Common 13 (south) */ +#define B2062_S_COMM14 B43_LP_SOUTH(0x00E) /* Common 14 (south) */ +#define B2062_S_COMM15 B43_LP_SOUTH(0x00F) /* Common 15 (south) */ +#define B2062_S_PDS_CTL0 B43_LP_SOUTH(0x010) /* PDS Control 0 (south) */ +#define B2062_S_PDS_CTL1 B43_LP_SOUTH(0x011) /* PDS Control 1 (south) */ +#define B2062_S_PDS_CTL2 B43_LP_SOUTH(0x012) /* PDS Control 2 (south) */ +#define B2062_S_PDS_CTL3 B43_LP_SOUTH(0x013) /* PDS Control 3 (south) */ +#define B2062_S_BG_CTL0 B43_LP_SOUTH(0x014) /* BG Control 0 (south) */ +#define B2062_S_BG_CTL1 B43_LP_SOUTH(0x015) /* BG Control 1 (south) */ +#define B2062_S_BG_CTL2 B43_LP_SOUTH(0x016) /* BG Control 2 (south) */ +#define B2062_S_LGENG_CTL0 B43_LP_SOUTH(0x017) /* LGENG Control 00 (south) */ +#define B2062_S_LGENG_CTL1 B43_LP_SOUTH(0x018) /* LGENG Control 01 (south) */ +#define B2062_S_LGENG_CTL2 B43_LP_SOUTH(0x019) /* LGENG Control 02 (south) */ +#define B2062_S_LGENG_CTL3 B43_LP_SOUTH(0x01A) /* LGENG Control 03 (south) */ +#define B2062_S_LGENG_CTL4 B43_LP_SOUTH(0x01B) /* LGENG Control 04 (south) */ +#define B2062_S_LGENG_CTL5 B43_LP_SOUTH(0x01C) /* LGENG Control 05 (south) */ +#define B2062_S_LGENG_CTL6 B43_LP_SOUTH(0x01D) /* LGENG Control 06 (south) */ +#define B2062_S_LGENG_CTL7 B43_LP_SOUTH(0x01E) /* LGENG Control 07 (south) */ +#define B2062_S_LGENG_CTL8 B43_LP_SOUTH(0x01F) /* LGENG Control 08 (south) */ +#define B2062_S_LGENG_CTL9 B43_LP_SOUTH(0x020) /* LGENG Control 09 (south) */ +#define B2062_S_LGENG_CTL10 B43_LP_SOUTH(0x021) /* LGENG Control 10 (south) */ +#define B2062_S_LGENG_CTL11 B43_LP_SOUTH(0x022) /* LGENG Control 11 (south) */ +#define B2062_S_REFPLL_CTL0 B43_LP_SOUTH(0x023) /* REFPLL Control 00 (south) */ +#define B2062_S_REFPLL_CTL1 B43_LP_SOUTH(0x024) /* REFPLL Control 01 (south) */ +#define B2062_S_REFPLL_CTL2 B43_LP_SOUTH(0x025) /* REFPLL Control 02 (south) */ +#define B2062_S_REFPLL_CTL3 B43_LP_SOUTH(0x026) /* REFPLL Control 03 (south) */ +#define B2062_S_REFPLL_CTL4 B43_LP_SOUTH(0x027) /* REFPLL Control 04 (south) */ +#define B2062_S_REFPLL_CTL5 B43_LP_SOUTH(0x028) /* REFPLL Control 05 (south) */ +#define B2062_S_REFPLL_CTL6 B43_LP_SOUTH(0x029) /* REFPLL Control 06 (south) */ +#define B2062_S_REFPLL_CTL7 B43_LP_SOUTH(0x02A) /* REFPLL Control 07 (south) */ +#define B2062_S_REFPLL_CTL8 B43_LP_SOUTH(0x02B) /* REFPLL Control 08 (south) */ +#define B2062_S_REFPLL_CTL9 B43_LP_SOUTH(0x02C) /* REFPLL Control 09 (south) */ +#define B2062_S_REFPLL_CTL10 B43_LP_SOUTH(0x02D) /* REFPLL Control 10 (south) */ +#define B2062_S_REFPLL_CTL11 B43_LP_SOUTH(0x02E) /* REFPLL Control 11 (south) */ +#define B2062_S_REFPLL_CTL12 B43_LP_SOUTH(0x02F) /* REFPLL Control 12 (south) */ +#define B2062_S_REFPLL_CTL13 B43_LP_SOUTH(0x030) /* REFPLL Control 13 (south) */ +#define B2062_S_REFPLL_CTL14 B43_LP_SOUTH(0x031) /* REFPLL Control 14 (south) */ +#define B2062_S_REFPLL_CTL15 B43_LP_SOUTH(0x032) /* REFPLL Control 15 (south) */ +#define B2062_S_REFPLL_CTL16 B43_LP_SOUTH(0x033) /* REFPLL Control 16 (south) */ +#define B2062_S_RFPLL_CTL0 B43_LP_SOUTH(0x034) /* RFPLL Control 00 (south) */ +#define B2062_S_RFPLL_CTL1 B43_LP_SOUTH(0x035) /* RFPLL Control 01 (south) */ +#define B2062_S_RFPLL_CTL2 B43_LP_SOUTH(0x036) /* RFPLL Control 02 (south) */ +#define B2062_S_RFPLL_CTL3 B43_LP_SOUTH(0x037) /* RFPLL Control 03 (south) */ +#define B2062_S_RFPLL_CTL4 B43_LP_SOUTH(0x038) /* RFPLL Control 04 (south) */ +#define B2062_S_RFPLL_CTL5 B43_LP_SOUTH(0x039) /* RFPLL Control 05 (south) */ +#define B2062_S_RFPLL_CTL6 B43_LP_SOUTH(0x03A) /* RFPLL Control 06 (south) */ +#define B2062_S_RFPLL_CTL7 B43_LP_SOUTH(0x03B) /* RFPLL Control 07 (south) */ +#define B2062_S_RFPLL_CTL8 B43_LP_SOUTH(0x03C) /* RFPLL Control 08 (south) */ +#define B2062_S_RFPLL_CTL9 B43_LP_SOUTH(0x03D) /* RFPLL Control 09 (south) */ +#define B2062_S_RFPLL_CTL10 B43_LP_SOUTH(0x03E) /* RFPLL Control 10 (south) */ +#define B2062_S_RFPLL_CTL11 B43_LP_SOUTH(0x03F) /* RFPLL Control 11 (south) */ +#define B2062_S_RFPLL_CTL12 B43_LP_SOUTH(0x040) /* RFPLL Control 12 (south) */ +#define B2062_S_RFPLL_CTL13 B43_LP_SOUTH(0x041) /* RFPLL Control 13 (south) */ +#define B2062_S_RFPLL_CTL14 B43_LP_SOUTH(0x042) /* RFPLL Control 14 (south) */ +#define B2062_S_RFPLL_CTL15 B43_LP_SOUTH(0x043) /* RFPLL Control 15 (south) */ +#define B2062_S_RFPLL_CTL16 B43_LP_SOUTH(0x044) /* RFPLL Control 16 (south) */ +#define B2062_S_RFPLL_CTL17 B43_LP_SOUTH(0x045) /* RFPLL Control 17 (south) */ +#define B2062_S_RFPLL_CTL18 B43_LP_SOUTH(0x046) /* RFPLL Control 18 (south) */ +#define B2062_S_RFPLL_CTL19 B43_LP_SOUTH(0x047) /* RFPLL Control 19 (south) */ +#define B2062_S_RFPLL_CTL20 B43_LP_SOUTH(0x048) /* RFPLL Control 20 (south) */ +#define B2062_S_RFPLL_CTL21 B43_LP_SOUTH(0x049) /* RFPLL Control 21 (south) */ +#define B2062_S_RFPLL_CTL22 B43_LP_SOUTH(0x04A) /* RFPLL Control 22 (south) */ +#define B2062_S_RFPLL_CTL23 B43_LP_SOUTH(0x04B) /* RFPLL Control 23 (south) */ +#define B2062_S_RFPLL_CTL24 B43_LP_SOUTH(0x04C) /* RFPLL Control 24 (south) */ +#define B2062_S_RFPLL_CTL25 B43_LP_SOUTH(0x04D) /* RFPLL Control 25 (south) */ +#define B2062_S_RFPLL_CTL26 B43_LP_SOUTH(0x04E) /* RFPLL Control 26 (south) */ +#define B2062_S_RFPLL_CTL27 B43_LP_SOUTH(0x04F) /* RFPLL Control 27 (south) */ +#define B2062_S_RFPLL_CTL28 B43_LP_SOUTH(0x050) /* RFPLL Control 28 (south) */ +#define B2062_S_RFPLL_CTL29 B43_LP_SOUTH(0x051) /* RFPLL Control 29 (south) */ +#define B2062_S_RFPLL_CTL30 B43_LP_SOUTH(0x052) /* RFPLL Control 30 (south) */ +#define B2062_S_RFPLL_CTL31 B43_LP_SOUTH(0x053) /* RFPLL Control 31 (south) */ +#define B2062_S_RFPLL_CTL32 B43_LP_SOUTH(0x054) /* RFPLL Control 32 (south) */ +#define B2062_S_RFPLL_CTL33 B43_LP_SOUTH(0x055) /* RFPLL Control 33 (south) */ +#define B2062_S_RFPLL_CTL34 B43_LP_SOUTH(0x056) /* RFPLL Control 34 (south) */ +#define B2062_S_RXG_CNT0 B43_LP_SOUTH(0x057) /* RXG Counter 00 (south) */ +#define B2062_S_RXG_CNT1 B43_LP_SOUTH(0x058) /* RXG Counter 01 (south) */ +#define B2062_S_RXG_CNT2 B43_LP_SOUTH(0x059) /* RXG Counter 02 (south) */ +#define B2062_S_RXG_CNT3 B43_LP_SOUTH(0x05A) /* RXG Counter 03 (south) */ +#define B2062_S_RXG_CNT4 B43_LP_SOUTH(0x05B) /* RXG Counter 04 (south) */ +#define B2062_S_RXG_CNT5 B43_LP_SOUTH(0x05C) /* RXG Counter 05 (south) */ +#define B2062_S_RXG_CNT6 B43_LP_SOUTH(0x05D) /* RXG Counter 06 (south) */ +#define B2062_S_RXG_CNT7 B43_LP_SOUTH(0x05E) /* RXG Counter 07 (south) */ +#define B2062_S_RXG_CNT8 B43_LP_SOUTH(0x05F) /* RXG Counter 08 (south) */ +#define B2062_S_RXG_CNT9 B43_LP_SOUTH(0x060) /* RXG Counter 09 (south) */ +#define B2062_S_RXG_CNT10 B43_LP_SOUTH(0x061) /* RXG Counter 10 (south) */ +#define B2062_S_RXG_CNT11 B43_LP_SOUTH(0x062) /* RXG Counter 11 (south) */ +#define B2062_S_RXG_CNT12 B43_LP_SOUTH(0x063) /* RXG Counter 12 (south) */ +#define B2062_S_RXG_CNT13 B43_LP_SOUTH(0x064) /* RXG Counter 13 (south) */ +#define B2062_S_RXG_CNT14 B43_LP_SOUTH(0x065) /* RXG Counter 14 (south) */ +#define B2062_S_RXG_CNT15 B43_LP_SOUTH(0x066) /* RXG Counter 15 (south) */ +#define B2062_S_RXG_CNT16 B43_LP_SOUTH(0x067) /* RXG Counter 16 (south) */ +#define B2062_S_RXG_CNT17 B43_LP_SOUTH(0x068) /* RXG Counter 17 (south) */ + + + +/*** Broadcom 2063 radio registers ***/ +#define B2063_RADIO_ID_CODE B43_LP_RADIO(0x001) /* Radio ID code */ +#define B2063_COMM1 B43_LP_RADIO(0x000) /* Common 01 */ +#define B2063_COMM2 B43_LP_RADIO(0x002) /* Common 02 */ +#define B2063_COMM3 B43_LP_RADIO(0x003) /* Common 03 */ +#define B2063_COMM4 B43_LP_RADIO(0x004) /* Common 04 */ +#define B2063_COMM5 B43_LP_RADIO(0x005) /* Common 05 */ +#define B2063_COMM6 B43_LP_RADIO(0x006) /* Common 06 */ +#define B2063_COMM7 B43_LP_RADIO(0x007) /* Common 07 */ +#define B2063_COMM8 B43_LP_RADIO(0x008) /* Common 08 */ +#define B2063_COMM9 B43_LP_RADIO(0x009) /* Common 09 */ +#define B2063_COMM10 B43_LP_RADIO(0x00A) /* Common 10 */ +#define B2063_COMM11 B43_LP_RADIO(0x00B) /* Common 11 */ +#define B2063_COMM12 B43_LP_RADIO(0x00C) /* Common 12 */ +#define B2063_COMM13 B43_LP_RADIO(0x00D) /* Common 13 */ +#define B2063_COMM14 B43_LP_RADIO(0x00E) /* Common 14 */ +#define B2063_COMM15 B43_LP_RADIO(0x00F) /* Common 15 */ +#define B2063_COMM16 B43_LP_RADIO(0x010) /* Common 16 */ +#define B2063_COMM17 B43_LP_RADIO(0x011) /* Common 17 */ +#define B2063_COMM18 B43_LP_RADIO(0x012) /* Common 18 */ +#define B2063_COMM19 B43_LP_RADIO(0x013) /* Common 19 */ +#define B2063_COMM20 B43_LP_RADIO(0x014) /* Common 20 */ +#define B2063_COMM21 B43_LP_RADIO(0x015) /* Common 21 */ +#define B2063_COMM22 B43_LP_RADIO(0x016) /* Common 22 */ +#define B2063_COMM23 B43_LP_RADIO(0x017) /* Common 23 */ +#define B2063_COMM24 B43_LP_RADIO(0x018) /* Common 24 */ +#define B2063_PWR_SWITCH_CTL B43_LP_RADIO(0x019) /* POWER SWITCH Control */ +#define B2063_PLL_SP1 B43_LP_RADIO(0x01A) /* PLL SP 1 */ +#define B2063_PLL_SP2 B43_LP_RADIO(0x01B) /* PLL SP 2 */ +#define B2063_LOGEN_SP1 B43_LP_RADIO(0x01C) /* LOGEN SP 1 */ +#define B2063_LOGEN_SP2 B43_LP_RADIO(0x01D) /* LOGEN SP 2 */ +#define B2063_LOGEN_SP3 B43_LP_RADIO(0x01E) /* LOGEN SP 3 */ +#define B2063_LOGEN_SP4 B43_LP_RADIO(0x01F) /* LOGEN SP 4 */ +#define B2063_LOGEN_SP5 B43_LP_RADIO(0x020) /* LOGEN SP 5 */ +#define B2063_G_RX_SP1 B43_LP_RADIO(0x021) /* G RX SP 1 */ +#define B2063_G_RX_SP2 B43_LP_RADIO(0x022) /* G RX SP 2 */ +#define B2063_G_RX_SP3 B43_LP_RADIO(0x023) /* G RX SP 3 */ +#define B2063_G_RX_SP4 B43_LP_RADIO(0x024) /* G RX SP 4 */ +#define B2063_G_RX_SP5 B43_LP_RADIO(0x025) /* G RX SP 5 */ +#define B2063_G_RX_SP6 B43_LP_RADIO(0x026) /* G RX SP 6 */ +#define B2063_G_RX_SP7 B43_LP_RADIO(0x027) /* G RX SP 7 */ +#define B2063_G_RX_SP8 B43_LP_RADIO(0x028) /* G RX SP 8 */ +#define B2063_G_RX_SP9 B43_LP_RADIO(0x029) /* G RX SP 9 */ +#define B2063_G_RX_SP10 B43_LP_RADIO(0x02A) /* G RX SP 10 */ +#define B2063_G_RX_SP11 B43_LP_RADIO(0x02B) /* G RX SP 11 */ +#define B2063_A_RX_SP1 B43_LP_RADIO(0x02C) /* A RX SP 1 */ +#define B2063_A_RX_SP2 B43_LP_RADIO(0x02D) /* A RX SP 2 */ +#define B2063_A_RX_SP3 B43_LP_RADIO(0x02E) /* A RX SP 3 */ +#define B2063_A_RX_SP4 B43_LP_RADIO(0x02F) /* A RX SP 4 */ +#define B2063_A_RX_SP5 B43_LP_RADIO(0x030) /* A RX SP 5 */ +#define B2063_A_RX_SP6 B43_LP_RADIO(0x031) /* A RX SP 6 */ +#define B2063_A_RX_SP7 B43_LP_RADIO(0x032) /* A RX SP 7 */ +#define B2063_RX_BB_SP1 B43_LP_RADIO(0x033) /* RX BB SP 1 */ +#define B2063_RX_BB_SP2 B43_LP_RADIO(0x034) /* RX BB SP 2 */ +#define B2063_RX_BB_SP3 B43_LP_RADIO(0x035) /* RX BB SP 3 */ +#define B2063_RX_BB_SP4 B43_LP_RADIO(0x036) /* RX BB SP 4 */ +#define B2063_RX_BB_SP5 B43_LP_RADIO(0x037) /* RX BB SP 5 */ +#define B2063_RX_BB_SP6 B43_LP_RADIO(0x038) /* RX BB SP 6 */ +#define B2063_RX_BB_SP7 B43_LP_RADIO(0x039) /* RX BB SP 7 */ +#define B2063_RX_BB_SP8 B43_LP_RADIO(0x03A) /* RX BB SP 8 */ +#define B2063_TX_RF_SP1 B43_LP_RADIO(0x03B) /* TX RF SP 1 */ +#define B2063_TX_RF_SP2 B43_LP_RADIO(0x03C) /* TX RF SP 2 */ +#define B2063_TX_RF_SP3 B43_LP_RADIO(0x03D) /* TX RF SP 3 */ +#define B2063_TX_RF_SP4 B43_LP_RADIO(0x03E) /* TX RF SP 4 */ +#define B2063_TX_RF_SP5 B43_LP_RADIO(0x03F) /* TX RF SP 5 */ +#define B2063_TX_RF_SP6 B43_LP_RADIO(0x040) /* TX RF SP 6 */ +#define B2063_TX_RF_SP7 B43_LP_RADIO(0x041) /* TX RF SP 7 */ +#define B2063_TX_RF_SP8 B43_LP_RADIO(0x042) /* TX RF SP 8 */ +#define B2063_TX_RF_SP9 B43_LP_RADIO(0x043) /* TX RF SP 9 */ +#define B2063_TX_RF_SP10 B43_LP_RADIO(0x044) /* TX RF SP 10 */ +#define B2063_TX_RF_SP11 B43_LP_RADIO(0x045) /* TX RF SP 11 */ +#define B2063_TX_RF_SP12 B43_LP_RADIO(0x046) /* TX RF SP 12 */ +#define B2063_TX_RF_SP13 B43_LP_RADIO(0x047) /* TX RF SP 13 */ +#define B2063_TX_RF_SP14 B43_LP_RADIO(0x048) /* TX RF SP 14 */ +#define B2063_TX_RF_SP15 B43_LP_RADIO(0x049) /* TX RF SP 15 */ +#define B2063_TX_RF_SP16 B43_LP_RADIO(0x04A) /* TX RF SP 16 */ +#define B2063_TX_RF_SP17 B43_LP_RADIO(0x04B) /* TX RF SP 17 */ +#define B2063_PA_SP1 B43_LP_RADIO(0x04C) /* PA SP 1 */ +#define B2063_PA_SP2 B43_LP_RADIO(0x04D) /* PA SP 2 */ +#define B2063_PA_SP3 B43_LP_RADIO(0x04E) /* PA SP 3 */ +#define B2063_PA_SP4 B43_LP_RADIO(0x04F) /* PA SP 4 */ +#define B2063_PA_SP5 B43_LP_RADIO(0x050) /* PA SP 5 */ +#define B2063_PA_SP6 B43_LP_RADIO(0x051) /* PA SP 6 */ +#define B2063_PA_SP7 B43_LP_RADIO(0x052) /* PA SP 7 */ +#define B2063_TX_BB_SP1 B43_LP_RADIO(0x053) /* TX BB SP 1 */ +#define B2063_TX_BB_SP2 B43_LP_RADIO(0x054) /* TX BB SP 2 */ +#define B2063_TX_BB_SP3 B43_LP_RADIO(0x055) /* TX BB SP 3 */ +#define B2063_REG_SP1 B43_LP_RADIO(0x056) /* REG SP 1 */ +#define B2063_BANDGAP_CTL1 B43_LP_RADIO(0x057) /* BANDGAP Control 1 */ +#define B2063_BANDGAP_CTL2 B43_LP_RADIO(0x058) /* BANDGAP Control 2 */ +#define B2063_LPO_CTL1 B43_LP_RADIO(0x059) /* LPO Control 1 */ +#define B2063_RC_CALIB_CTL1 B43_LP_RADIO(0x05A) /* RC Calibration Control 1 */ +#define B2063_RC_CALIB_CTL2 B43_LP_RADIO(0x05B) /* RC Calibration Control 2 */ +#define B2063_RC_CALIB_CTL3 B43_LP_RADIO(0x05C) /* RC Calibration Control 3 */ +#define B2063_RC_CALIB_CTL4 B43_LP_RADIO(0x05D) /* RC Calibration Control 4 */ +#define B2063_RC_CALIB_CTL5 B43_LP_RADIO(0x05E) /* RC Calibration Control 5 */ +#define B2063_RC_CALIB_CTL6 B43_LP_RADIO(0x05F) /* RC Calibration Control 6 */ +#define B2063_RC_CALIB_CTL7 B43_LP_RADIO(0x060) /* RC Calibration Control 7 */ +#define B2063_RC_CALIB_CTL8 B43_LP_RADIO(0x061) /* RC Calibration Control 8 */ +#define B2063_RC_CALIB_CTL9 B43_LP_RADIO(0x062) /* RC Calibration Control 9 */ +#define B2063_RC_CALIB_CTL10 B43_LP_RADIO(0x063) /* RC Calibration Control 10 */ +#define B2063_PLL_JTAG_CALNRST B43_LP_RADIO(0x064) /* PLL JTAG CALNRST */ +#define B2063_PLL_JTAG_IN_PLL1 B43_LP_RADIO(0x065) /* PLL JTAG IN PLL 1 */ +#define B2063_PLL_JTAG_IN_PLL2 B43_LP_RADIO(0x066) /* PLL JTAG IN PLL 2 */ +#define B2063_PLL_JTAG_PLL_CP1 B43_LP_RADIO(0x067) /* PLL JTAG PLL CP 1 */ +#define B2063_PLL_JTAG_PLL_CP2 B43_LP_RADIO(0x068) /* PLL JTAG PLL CP 2 */ +#define B2063_PLL_JTAG_PLL_CP3 B43_LP_RADIO(0x069) /* PLL JTAG PLL CP 3 */ +#define B2063_PLL_JTAG_PLL_CP4 B43_LP_RADIO(0x06A) /* PLL JTAG PLL CP 4 */ +#define B2063_PLL_JTAG_PLL_CTL1 B43_LP_RADIO(0x06B) /* PLL JTAG PLL Control 1 */ +#define B2063_PLL_JTAG_PLL_LF1 B43_LP_RADIO(0x06C) /* PLL JTAG PLL LF 1 */ +#define B2063_PLL_JTAG_PLL_LF2 B43_LP_RADIO(0x06D) /* PLL JTAG PLL LF 2 */ +#define B2063_PLL_JTAG_PLL_LF3 B43_LP_RADIO(0x06E) /* PLL JTAG PLL LF 3 */ +#define B2063_PLL_JTAG_PLL_LF4 B43_LP_RADIO(0x06F) /* PLL JTAG PLL LF 4 */ +#define B2063_PLL_JTAG_PLL_SG1 B43_LP_RADIO(0x070) /* PLL JTAG PLL SG 1 */ +#define B2063_PLL_JTAG_PLL_SG2 B43_LP_RADIO(0x071) /* PLL JTAG PLL SG 2 */ +#define B2063_PLL_JTAG_PLL_SG3 B43_LP_RADIO(0x072) /* PLL JTAG PLL SG 3 */ +#define B2063_PLL_JTAG_PLL_SG4 B43_LP_RADIO(0x073) /* PLL JTAG PLL SG 4 */ +#define B2063_PLL_JTAG_PLL_SG5 B43_LP_RADIO(0x074) /* PLL JTAG PLL SG 5 */ +#define B2063_PLL_JTAG_PLL_VCO1 B43_LP_RADIO(0x075) /* PLL JTAG PLL VCO 1 */ +#define B2063_PLL_JTAG_PLL_VCO2 B43_LP_RADIO(0x076) /* PLL JTAG PLL VCO 2 */ +#define B2063_PLL_JTAG_PLL_VCO_CALIB1 B43_LP_RADIO(0x077) /* PLL JTAG PLL VCO Calibration 1 */ +#define B2063_PLL_JTAG_PLL_VCO_CALIB2 B43_LP_RADIO(0x078) /* PLL JTAG PLL VCO Calibration 2 */ +#define B2063_PLL_JTAG_PLL_VCO_CALIB3 B43_LP_RADIO(0x079) /* PLL JTAG PLL VCO Calibration 3 */ +#define B2063_PLL_JTAG_PLL_VCO_CALIB4 B43_LP_RADIO(0x07A) /* PLL JTAG PLL VCO Calibration 4 */ +#define B2063_PLL_JTAG_PLL_VCO_CALIB5 B43_LP_RADIO(0x07B) /* PLL JTAG PLL VCO Calibration 5 */ +#define B2063_PLL_JTAG_PLL_VCO_CALIB6 B43_LP_RADIO(0x07C) /* PLL JTAG PLL VCO Calibration 6 */ +#define B2063_PLL_JTAG_PLL_VCO_CALIB7 B43_LP_RADIO(0x07D) /* PLL JTAG PLL VCO Calibration 7 */ +#define B2063_PLL_JTAG_PLL_VCO_CALIB8 B43_LP_RADIO(0x07E) /* PLL JTAG PLL VCO Calibration 8 */ +#define B2063_PLL_JTAG_PLL_VCO_CALIB9 B43_LP_RADIO(0x07F) /* PLL JTAG PLL VCO Calibration 9 */ +#define B2063_PLL_JTAG_PLL_VCO_CALIB10 B43_LP_RADIO(0x080) /* PLL JTAG PLL VCO Calibration 10 */ +#define B2063_PLL_JTAG_PLL_XTAL_12 B43_LP_RADIO(0x081) /* PLL JTAG PLL XTAL 1 2 */ +#define B2063_PLL_JTAG_PLL_XTAL3 B43_LP_RADIO(0x082) /* PLL JTAG PLL XTAL 3 */ +#define B2063_LOGEN_ACL1 B43_LP_RADIO(0x083) /* LOGEN ACL 1 */ +#define B2063_LOGEN_ACL2 B43_LP_RADIO(0x084) /* LOGEN ACL 2 */ +#define B2063_LOGEN_ACL3 B43_LP_RADIO(0x085) /* LOGEN ACL 3 */ +#define B2063_LOGEN_ACL4 B43_LP_RADIO(0x086) /* LOGEN ACL 4 */ +#define B2063_LOGEN_ACL5 B43_LP_RADIO(0x087) /* LOGEN ACL 5 */ +#define B2063_LO_CALIB_INPUTS B43_LP_RADIO(0x088) /* LO Calibration INPUTS */ +#define B2063_LO_CALIB_CTL1 B43_LP_RADIO(0x089) /* LO Calibration Control 1 */ +#define B2063_LO_CALIB_CTL2 B43_LP_RADIO(0x08A) /* LO Calibration Control 2 */ +#define B2063_LO_CALIB_CTL3 B43_LP_RADIO(0x08B) /* LO Calibration Control 3 */ +#define B2063_LO_CALIB_WAITCNT B43_LP_RADIO(0x08C) /* LO Calibration WAITCNT */ +#define B2063_LO_CALIB_OVR1 B43_LP_RADIO(0x08D) /* LO Calibration OVR 1 */ +#define B2063_LO_CALIB_OVR2 B43_LP_RADIO(0x08E) /* LO Calibration OVR 2 */ +#define B2063_LO_CALIB_OVAL1 B43_LP_RADIO(0x08F) /* LO Calibration OVAL 1 */ +#define B2063_LO_CALIB_OVAL2 B43_LP_RADIO(0x090) /* LO Calibration OVAL 2 */ +#define B2063_LO_CALIB_OVAL3 B43_LP_RADIO(0x091) /* LO Calibration OVAL 3 */ +#define B2063_LO_CALIB_OVAL4 B43_LP_RADIO(0x092) /* LO Calibration OVAL 4 */ +#define B2063_LO_CALIB_OVAL5 B43_LP_RADIO(0x093) /* LO Calibration OVAL 5 */ +#define B2063_LO_CALIB_OVAL6 B43_LP_RADIO(0x094) /* LO Calibration OVAL 6 */ +#define B2063_LO_CALIB_OVAL7 B43_LP_RADIO(0x095) /* LO Calibration OVAL 7 */ +#define B2063_LO_CALIB_CALVLD1 B43_LP_RADIO(0x096) /* LO Calibration CALVLD 1 */ +#define B2063_LO_CALIB_CALVLD2 B43_LP_RADIO(0x097) /* LO Calibration CALVLD 2 */ +#define B2063_LO_CALIB_CVAL1 B43_LP_RADIO(0x098) /* LO Calibration CVAL 1 */ +#define B2063_LO_CALIB_CVAL2 B43_LP_RADIO(0x099) /* LO Calibration CVAL 2 */ +#define B2063_LO_CALIB_CVAL3 B43_LP_RADIO(0x09A) /* LO Calibration CVAL 3 */ +#define B2063_LO_CALIB_CVAL4 B43_LP_RADIO(0x09B) /* LO Calibration CVAL 4 */ +#define B2063_LO_CALIB_CVAL5 B43_LP_RADIO(0x09C) /* LO Calibration CVAL 5 */ +#define B2063_LO_CALIB_CVAL6 B43_LP_RADIO(0x09D) /* LO Calibration CVAL 6 */ +#define B2063_LO_CALIB_CVAL7 B43_LP_RADIO(0x09E) /* LO Calibration CVAL 7 */ +#define B2063_LOGEN_CALIB_EN B43_LP_RADIO(0x09F) /* LOGEN Calibration EN */ +#define B2063_LOGEN_PEAKDET1 B43_LP_RADIO(0x0A0) /* LOGEN PEAKDET 1 */ +#define B2063_LOGEN_RCCR1 B43_LP_RADIO(0x0A1) /* LOGEN RCCR 1 */ +#define B2063_LOGEN_VCOBUF1 B43_LP_RADIO(0x0A2) /* LOGEN VCOBUF 1 */ +#define B2063_LOGEN_MIXER1 B43_LP_RADIO(0x0A3) /* LOGEN MIXER 1 */ +#define B2063_LOGEN_MIXER2 B43_LP_RADIO(0x0A4) /* LOGEN MIXER 2 */ +#define B2063_LOGEN_BUF1 B43_LP_RADIO(0x0A5) /* LOGEN BUF 1 */ +#define B2063_LOGEN_BUF2 B43_LP_RADIO(0x0A6) /* LOGEN BUF 2 */ +#define B2063_LOGEN_DIV1 B43_LP_RADIO(0x0A7) /* LOGEN DIV 1 */ +#define B2063_LOGEN_DIV2 B43_LP_RADIO(0x0A8) /* LOGEN DIV 2 */ +#define B2063_LOGEN_DIV3 B43_LP_RADIO(0x0A9) /* LOGEN DIV 3 */ +#define B2063_LOGEN_CBUFRX1 B43_LP_RADIO(0x0AA) /* LOGEN CBUFRX 1 */ +#define B2063_LOGEN_CBUFRX2 B43_LP_RADIO(0x0AB) /* LOGEN CBUFRX 2 */ +#define B2063_LOGEN_CBUFTX1 B43_LP_RADIO(0x0AC) /* LOGEN CBUFTX 1 */ +#define B2063_LOGEN_CBUFTX2 B43_LP_RADIO(0x0AD) /* LOGEN CBUFTX 2 */ +#define B2063_LOGEN_IDAC1 B43_LP_RADIO(0x0AE) /* LOGEN IDAC 1 */ +#define B2063_LOGEN_SPARE1 B43_LP_RADIO(0x0AF) /* LOGEN SPARE 1 */ +#define B2063_LOGEN_SPARE2 B43_LP_RADIO(0x0B0) /* LOGEN SPARE 2 */ +#define B2063_LOGEN_SPARE3 B43_LP_RADIO(0x0B1) /* LOGEN SPARE 3 */ +#define B2063_G_RX_1ST1 B43_LP_RADIO(0x0B2) /* G RX 1ST 1 */ +#define B2063_G_RX_1ST2 B43_LP_RADIO(0x0B3) /* G RX 1ST 2 */ +#define B2063_G_RX_1ST3 B43_LP_RADIO(0x0B4) /* G RX 1ST 3 */ +#define B2063_G_RX_2ND1 B43_LP_RADIO(0x0B5) /* G RX 2ND 1 */ +#define B2063_G_RX_2ND2 B43_LP_RADIO(0x0B6) /* G RX 2ND 2 */ +#define B2063_G_RX_2ND3 B43_LP_RADIO(0x0B7) /* G RX 2ND 3 */ +#define B2063_G_RX_2ND4 B43_LP_RADIO(0x0B8) /* G RX 2ND 4 */ +#define B2063_G_RX_2ND5 B43_LP_RADIO(0x0B9) /* G RX 2ND 5 */ +#define B2063_G_RX_2ND6 B43_LP_RADIO(0x0BA) /* G RX 2ND 6 */ +#define B2063_G_RX_2ND7 B43_LP_RADIO(0x0BB) /* G RX 2ND 7 */ +#define B2063_G_RX_2ND8 B43_LP_RADIO(0x0BC) /* G RX 2ND 8 */ +#define B2063_G_RX_PS1 B43_LP_RADIO(0x0BD) /* G RX PS 1 */ +#define B2063_G_RX_PS2 B43_LP_RADIO(0x0BE) /* G RX PS 2 */ +#define B2063_G_RX_PS3 B43_LP_RADIO(0x0BF) /* G RX PS 3 */ +#define B2063_G_RX_PS4 B43_LP_RADIO(0x0C0) /* G RX PS 4 */ +#define B2063_G_RX_PS5 B43_LP_RADIO(0x0C1) /* G RX PS 5 */ +#define B2063_G_RX_MIX1 B43_LP_RADIO(0x0C2) /* G RX MIX 1 */ +#define B2063_G_RX_MIX2 B43_LP_RADIO(0x0C3) /* G RX MIX 2 */ +#define B2063_G_RX_MIX3 B43_LP_RADIO(0x0C4) /* G RX MIX 3 */ +#define B2063_G_RX_MIX4 B43_LP_RADIO(0x0C5) /* G RX MIX 4 */ +#define B2063_G_RX_MIX5 B43_LP_RADIO(0x0C6) /* G RX MIX 5 */ +#define B2063_G_RX_MIX6 B43_LP_RADIO(0x0C7) /* G RX MIX 6 */ +#define B2063_G_RX_MIX7 B43_LP_RADIO(0x0C8) /* G RX MIX 7 */ +#define B2063_G_RX_MIX8 B43_LP_RADIO(0x0C9) /* G RX MIX 8 */ +#define B2063_G_RX_PDET1 B43_LP_RADIO(0x0CA) /* G RX PDET 1 */ +#define B2063_G_RX_SPARES1 B43_LP_RADIO(0x0CB) /* G RX SPARES 1 */ +#define B2063_G_RX_SPARES2 B43_LP_RADIO(0x0CC) /* G RX SPARES 2 */ +#define B2063_G_RX_SPARES3 B43_LP_RADIO(0x0CD) /* G RX SPARES 3 */ +#define B2063_A_RX_1ST1 B43_LP_RADIO(0x0CE) /* A RX 1ST 1 */ +#define B2063_A_RX_1ST2 B43_LP_RADIO(0x0CF) /* A RX 1ST 2 */ +#define B2063_A_RX_1ST3 B43_LP_RADIO(0x0D0) /* A RX 1ST 3 */ +#define B2063_A_RX_1ST4 B43_LP_RADIO(0x0D1) /* A RX 1ST 4 */ +#define B2063_A_RX_1ST5 B43_LP_RADIO(0x0D2) /* A RX 1ST 5 */ +#define B2063_A_RX_2ND1 B43_LP_RADIO(0x0D3) /* A RX 2ND 1 */ +#define B2063_A_RX_2ND2 B43_LP_RADIO(0x0D4) /* A RX 2ND 2 */ +#define B2063_A_RX_2ND3 B43_LP_RADIO(0x0D5) /* A RX 2ND 3 */ +#define B2063_A_RX_2ND4 B43_LP_RADIO(0x0D6) /* A RX 2ND 4 */ +#define B2063_A_RX_2ND5 B43_LP_RADIO(0x0D7) /* A RX 2ND 5 */ +#define B2063_A_RX_2ND6 B43_LP_RADIO(0x0D8) /* A RX 2ND 6 */ +#define B2063_A_RX_2ND7 B43_LP_RADIO(0x0D9) /* A RX 2ND 7 */ +#define B2063_A_RX_PS1 B43_LP_RADIO(0x0DA) /* A RX PS 1 */ +#define B2063_A_RX_PS2 B43_LP_RADIO(0x0DB) /* A RX PS 2 */ +#define B2063_A_RX_PS3 B43_LP_RADIO(0x0DC) /* A RX PS 3 */ +#define B2063_A_RX_PS4 B43_LP_RADIO(0x0DD) /* A RX PS 4 */ +#define B2063_A_RX_PS5 B43_LP_RADIO(0x0DE) /* A RX PS 5 */ +#define B2063_A_RX_PS6 B43_LP_RADIO(0x0DF) /* A RX PS 6 */ +#define B2063_A_RX_MIX1 B43_LP_RADIO(0x0E0) /* A RX MIX 1 */ +#define B2063_A_RX_MIX2 B43_LP_RADIO(0x0E1) /* A RX MIX 2 */ +#define B2063_A_RX_MIX3 B43_LP_RADIO(0x0E2) /* A RX MIX 3 */ +#define B2063_A_RX_MIX4 B43_LP_RADIO(0x0E3) /* A RX MIX 4 */ +#define B2063_A_RX_MIX5 B43_LP_RADIO(0x0E4) /* A RX MIX 5 */ +#define B2063_A_RX_MIX6 B43_LP_RADIO(0x0E5) /* A RX MIX 6 */ +#define B2063_A_RX_MIX7 B43_LP_RADIO(0x0E6) /* A RX MIX 7 */ +#define B2063_A_RX_MIX8 B43_LP_RADIO(0x0E7) /* A RX MIX 8 */ +#define B2063_A_RX_PWRDET1 B43_LP_RADIO(0x0E8) /* A RX PWRDET 1 */ +#define B2063_A_RX_SPARE1 B43_LP_RADIO(0x0E9) /* A RX SPARE 1 */ +#define B2063_A_RX_SPARE2 B43_LP_RADIO(0x0EA) /* A RX SPARE 2 */ +#define B2063_A_RX_SPARE3 B43_LP_RADIO(0x0EB) /* A RX SPARE 3 */ +#define B2063_RX_TIA_CTL1 B43_LP_RADIO(0x0EC) /* RX TIA Control 1 */ +#define B2063_RX_TIA_CTL2 B43_LP_RADIO(0x0ED) /* RX TIA Control 2 */ +#define B2063_RX_TIA_CTL3 B43_LP_RADIO(0x0EE) /* RX TIA Control 3 */ +#define B2063_RX_TIA_CTL4 B43_LP_RADIO(0x0EF) /* RX TIA Control 4 */ +#define B2063_RX_TIA_CTL5 B43_LP_RADIO(0x0F0) /* RX TIA Control 5 */ +#define B2063_RX_TIA_CTL6 B43_LP_RADIO(0x0F1) /* RX TIA Control 6 */ +#define B2063_RX_BB_CTL1 B43_LP_RADIO(0x0F2) /* RX BB Control 1 */ +#define B2063_RX_BB_CTL2 B43_LP_RADIO(0x0F3) /* RX BB Control 2 */ +#define B2063_RX_BB_CTL3 B43_LP_RADIO(0x0F4) /* RX BB Control 3 */ +#define B2063_RX_BB_CTL4 B43_LP_RADIO(0x0F5) /* RX BB Control 4 */ +#define B2063_RX_BB_CTL5 B43_LP_RADIO(0x0F6) /* RX BB Control 5 */ +#define B2063_RX_BB_CTL6 B43_LP_RADIO(0x0F7) /* RX BB Control 6 */ +#define B2063_RX_BB_CTL7 B43_LP_RADIO(0x0F8) /* RX BB Control 7 */ +#define B2063_RX_BB_CTL8 B43_LP_RADIO(0x0F9) /* RX BB Control 8 */ +#define B2063_RX_BB_CTL9 B43_LP_RADIO(0x0FA) /* RX BB Control 9 */ +#define B2063_TX_RF_CTL1 B43_LP_RADIO(0x0FB) /* TX RF Control 1 */ +#define B2063_TX_RF_IDAC_LO_RF_I B43_LP_RADIO(0x0FC) /* TX RF IDAC LO RF I */ +#define B2063_TX_RF_IDAC_LO_RF_Q B43_LP_RADIO(0x0FD) /* TX RF IDAC LO RF Q */ +#define B2063_TX_RF_IDAC_LO_BB_I B43_LP_RADIO(0x0FE) /* TX RF IDAC LO BB I */ +#define B2063_TX_RF_IDAC_LO_BB_Q B43_LP_RADIO(0x0FF) /* TX RF IDAC LO BB Q */ +#define B2063_TX_RF_CTL2 B43_LP_RADIO(0x100) /* TX RF Control 2 */ +#define B2063_TX_RF_CTL3 B43_LP_RADIO(0x101) /* TX RF Control 3 */ +#define B2063_TX_RF_CTL4 B43_LP_RADIO(0x102) /* TX RF Control 4 */ +#define B2063_TX_RF_CTL5 B43_LP_RADIO(0x103) /* TX RF Control 5 */ +#define B2063_TX_RF_CTL6 B43_LP_RADIO(0x104) /* TX RF Control 6 */ +#define B2063_TX_RF_CTL7 B43_LP_RADIO(0x105) /* TX RF Control 7 */ +#define B2063_TX_RF_CTL8 B43_LP_RADIO(0x106) /* TX RF Control 8 */ +#define B2063_TX_RF_CTL9 B43_LP_RADIO(0x107) /* TX RF Control 9 */ +#define B2063_TX_RF_CTL10 B43_LP_RADIO(0x108) /* TX RF Control 10 */ +#define B2063_TX_RF_CTL14 B43_LP_RADIO(0x109) /* TX RF Control 14 */ +#define B2063_TX_RF_CTL15 B43_LP_RADIO(0x10A) /* TX RF Control 15 */ +#define B2063_PA_CTL1 B43_LP_RADIO(0x10B) /* PA Control 1 */ +#define B2063_PA_CTL2 B43_LP_RADIO(0x10C) /* PA Control 2 */ +#define B2063_PA_CTL3 B43_LP_RADIO(0x10D) /* PA Control 3 */ +#define B2063_PA_CTL4 B43_LP_RADIO(0x10E) /* PA Control 4 */ +#define B2063_PA_CTL5 B43_LP_RADIO(0x10F) /* PA Control 5 */ +#define B2063_PA_CTL6 B43_LP_RADIO(0x110) /* PA Control 6 */ +#define B2063_PA_CTL7 B43_LP_RADIO(0x111) /* PA Control 7 */ +#define B2063_PA_CTL8 B43_LP_RADIO(0x112) /* PA Control 8 */ +#define B2063_PA_CTL9 B43_LP_RADIO(0x113) /* PA Control 9 */ +#define B2063_PA_CTL10 B43_LP_RADIO(0x114) /* PA Control 10 */ +#define B2063_PA_CTL11 B43_LP_RADIO(0x115) /* PA Control 11 */ +#define B2063_PA_CTL12 B43_LP_RADIO(0x116) /* PA Control 12 */ +#define B2063_PA_CTL13 B43_LP_RADIO(0x117) /* PA Control 13 */ +#define B2063_TX_BB_CTL1 B43_LP_RADIO(0x118) /* TX BB Control 1 */ +#define B2063_TX_BB_CTL2 B43_LP_RADIO(0x119) /* TX BB Control 2 */ +#define B2063_TX_BB_CTL3 B43_LP_RADIO(0x11A) /* TX BB Control 3 */ +#define B2063_TX_BB_CTL4 B43_LP_RADIO(0x11B) /* TX BB Control 4 */ +#define B2063_GPIO_CTL1 B43_LP_RADIO(0x11C) /* GPIO Control 1 */ +#define B2063_VREG_CTL1 B43_LP_RADIO(0x11D) /* VREG Control 1 */ +#define B2063_AMUX_CTL1 B43_LP_RADIO(0x11E) /* AMUX Control 1 */ +#define B2063_IQ_CALIB_GVAR B43_LP_RADIO(0x11F) /* IQ Calibration GVAR */ +#define B2063_IQ_CALIB_CTL1 B43_LP_RADIO(0x120) /* IQ Calibration Control 1 */ +#define B2063_IQ_CALIB_CTL2 B43_LP_RADIO(0x121) /* IQ Calibration Control 2 */ +#define B2063_TEMPSENSE_CTL1 B43_LP_RADIO(0x122) /* TEMPSENSE Control 1 */ +#define B2063_TEMPSENSE_CTL2 B43_LP_RADIO(0x123) /* TEMPSENSE Control 2 */ +#define B2063_TX_RX_LOOPBACK1 B43_LP_RADIO(0x124) /* TX/RX LOOPBACK 1 */ +#define B2063_TX_RX_LOOPBACK2 B43_LP_RADIO(0x125) /* TX/RX LOOPBACK 2 */ +#define B2063_EXT_TSSI_CTL1 B43_LP_RADIO(0x126) /* EXT TSSI Control 1 */ +#define B2063_EXT_TSSI_CTL2 B43_LP_RADIO(0x127) /* EXT TSSI Control 2 */ +#define B2063_AFE_CTL B43_LP_RADIO(0x128) /* AFE Control */ + + + +struct b43_phy_lp { + //TODO +}; + + +struct b43_phy_operations; +extern const struct b43_phy_operations b43_phyops_lp; + +#endif /* LINUX_B43_PHY_LP_H_ */ diff --git a/drivers/net/wireless/b43/nphy.c b/drivers/net/wireless/b43/phy_n.c index 644eed993be..8bcfda5f3f0 100644 --- a/drivers/net/wireless/b43/nphy.c +++ b/drivers/net/wireless/b43/phy_n.c @@ -26,7 +26,7 @@ #include <linux/types.h> #include "b43.h" -#include "nphy.h" +#include "phy_n.h" #include "tables_nphy.h" @@ -34,10 +34,16 @@ void b43_nphy_set_rxantenna(struct b43_wldev *dev, int antenna) {//TODO } -void b43_nphy_xmitpower(struct b43_wldev *dev) +static void b43_nphy_op_adjust_txpower(struct b43_wldev *dev) {//TODO } +static enum b43_txpwr_result b43_nphy_op_recalc_txpower(struct b43_wldev *dev, + bool ignore_tssi) +{//TODO + return B43_TXPWR_RES_DONE; +} + static void b43_chantab_radio_upload(struct b43_wldev *dev, const struct b43_nphy_channeltab_entry *e) { @@ -81,9 +87,8 @@ static void b43_nphy_tx_power_fix(struct b43_wldev *dev) //TODO } -/* Tune the hardware to a new channel. Don't call this directly. - * Use b43_radio_selectchannel() */ -int b43_nphy_selectchannel(struct b43_wldev *dev, u8 channel) +/* Tune the hardware to a new channel. */ +static int nphy_channel_switch(struct b43_wldev *dev, unsigned int channel) { const struct b43_nphy_channeltab_entry *tabent; @@ -162,7 +167,7 @@ static void b43_radio_init2055_post(struct b43_wldev *dev) msleep(1); b43_radio_mask(dev, B2055_CAL_LPOCTL, 0xFF7F); msleep(1); - b43_radio_selectchannel(dev, dev->phy.channel, 0); + nphy_channel_switch(dev, dev->phy.channel); b43_radio_write16(dev, B2055_C1_RX_BB_LPF, 0x9); b43_radio_write16(dev, B2055_C2_RX_BB_LPF, 0x9); b43_radio_write16(dev, B2055_C1_RX_BB_MIDACHP, 0x83); @@ -484,3 +489,140 @@ int b43_phy_initn(struct b43_wldev *dev) b43err(dev->wl, "IEEE 802.11n devices are not supported, yet.\n"); return 0; } + +static int b43_nphy_op_allocate(struct b43_wldev *dev) +{ + struct b43_phy_n *nphy; + + nphy = kzalloc(sizeof(*nphy), GFP_KERNEL); + if (!nphy) + return -ENOMEM; + dev->phy.n = nphy; + + return 0; +} + +static void b43_nphy_op_prepare_structs(struct b43_wldev *dev) +{ + struct b43_phy *phy = &dev->phy; + struct b43_phy_n *nphy = phy->n; + + memset(nphy, 0, sizeof(*nphy)); + + //TODO init struct b43_phy_n +} + +static void b43_nphy_op_free(struct b43_wldev *dev) +{ + struct b43_phy *phy = &dev->phy; + struct b43_phy_n *nphy = phy->n; + + kfree(nphy); + phy->n = NULL; +} + +static int b43_nphy_op_init(struct b43_wldev *dev) +{ + return b43_phy_initn(dev); +} + +static inline void check_phyreg(struct b43_wldev *dev, u16 offset) +{ +#if B43_DEBUG + if ((offset & B43_PHYROUTE) == B43_PHYROUTE_OFDM_GPHY) { + /* OFDM registers are onnly available on A/G-PHYs */ + b43err(dev->wl, "Invalid OFDM PHY access at " + "0x%04X on N-PHY\n", offset); + dump_stack(); + } + if ((offset & B43_PHYROUTE) == B43_PHYROUTE_EXT_GPHY) { + /* Ext-G registers are only available on G-PHYs */ + b43err(dev->wl, "Invalid EXT-G PHY access at " + "0x%04X on N-PHY\n", offset); + dump_stack(); + } +#endif /* B43_DEBUG */ +} + +static u16 b43_nphy_op_read(struct b43_wldev *dev, u16 reg) +{ + check_phyreg(dev, reg); + b43_write16(dev, B43_MMIO_PHY_CONTROL, reg); + return b43_read16(dev, B43_MMIO_PHY_DATA); +} + +static void b43_nphy_op_write(struct b43_wldev *dev, u16 reg, u16 value) +{ + check_phyreg(dev, reg); + b43_write16(dev, B43_MMIO_PHY_CONTROL, reg); + b43_write16(dev, B43_MMIO_PHY_DATA, value); +} + +static u16 b43_nphy_op_radio_read(struct b43_wldev *dev, u16 reg) +{ + /* Register 1 is a 32-bit register. */ + B43_WARN_ON(reg == 1); + /* N-PHY needs 0x100 for read access */ + reg |= 0x100; + + b43_write16(dev, B43_MMIO_RADIO_CONTROL, reg); + return b43_read16(dev, B43_MMIO_RADIO_DATA_LOW); +} + +static void b43_nphy_op_radio_write(struct b43_wldev *dev, u16 reg, u16 value) +{ + /* Register 1 is a 32-bit register. */ + B43_WARN_ON(reg == 1); + + b43_write16(dev, B43_MMIO_RADIO_CONTROL, reg); + b43_write16(dev, B43_MMIO_RADIO_DATA_LOW, value); +} + +static void b43_nphy_op_software_rfkill(struct b43_wldev *dev, + enum rfkill_state state) +{//TODO +} + +static void b43_nphy_op_switch_analog(struct b43_wldev *dev, bool on) +{ + b43_phy_write(dev, B43_NPHY_AFECTL_OVER, + on ? 0 : 0x7FFF); +} + +static int b43_nphy_op_switch_channel(struct b43_wldev *dev, + unsigned int new_channel) +{ + if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ) { + if ((new_channel < 1) || (new_channel > 14)) + return -EINVAL; + } else { + if (new_channel > 200) + return -EINVAL; + } + + return nphy_channel_switch(dev, new_channel); +} + +static unsigned int b43_nphy_op_get_default_chan(struct b43_wldev *dev) +{ + if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ) + return 1; + return 36; +} + +const struct b43_phy_operations b43_phyops_n = { + .allocate = b43_nphy_op_allocate, + .free = b43_nphy_op_free, + .prepare_structs = b43_nphy_op_prepare_structs, + .init = b43_nphy_op_init, + .phy_read = b43_nphy_op_read, + .phy_write = b43_nphy_op_write, + .radio_read = b43_nphy_op_radio_read, + .radio_write = b43_nphy_op_radio_write, + .software_rfkill = b43_nphy_op_software_rfkill, + .switch_analog = b43_nphy_op_switch_analog, + .switch_channel = b43_nphy_op_switch_channel, + .get_default_chan = b43_nphy_op_get_default_chan, + .recalc_txpower = b43_nphy_op_recalc_txpower, + .adjust_txpower = b43_nphy_op_adjust_txpower, +}; diff --git a/drivers/net/wireless/b43/nphy.h b/drivers/net/wireless/b43/phy_n.h index faf46b9cbf1..1749aef4147 100644 --- a/drivers/net/wireless/b43/nphy.h +++ b/drivers/net/wireless/b43/phy_n.h @@ -1,7 +1,7 @@ #ifndef B43_NPHY_H_ #define B43_NPHY_H_ -#include "phy.h" +#include "phy_common.h" /* N-PHY registers. */ @@ -919,54 +919,12 @@ struct b43_wldev; +struct b43_phy_n { + //TODO lots of missing stuff +}; -#ifdef CONFIG_B43_NPHY -/* N-PHY support enabled */ -int b43_phy_initn(struct b43_wldev *dev); +struct b43_phy_operations; +extern const struct b43_phy_operations b43_phyops_n; -void b43_nphy_radio_turn_on(struct b43_wldev *dev); -void b43_nphy_radio_turn_off(struct b43_wldev *dev); - -int b43_nphy_selectchannel(struct b43_wldev *dev, u8 channel); - -void b43_nphy_xmitpower(struct b43_wldev *dev); -void b43_nphy_set_rxantenna(struct b43_wldev *dev, int antenna); - - -#else /* CONFIG_B43_NPHY */ -/* N-PHY support disabled */ - - -static inline -int b43_phy_initn(struct b43_wldev *dev) -{ - return -EOPNOTSUPP; -} - -static inline -void b43_nphy_radio_turn_on(struct b43_wldev *dev) -{ -} -static inline -void b43_nphy_radio_turn_off(struct b43_wldev *dev) -{ -} - -static inline -int b43_nphy_selectchannel(struct b43_wldev *dev, u8 channel) -{ - return -ENOSYS; -} - -static inline -void b43_nphy_xmitpower(struct b43_wldev *dev) -{ -} -static inline -void b43_nphy_set_rxantenna(struct b43_wldev *dev, int antenna) -{ -} - -#endif /* CONFIG_B43_NPHY */ #endif /* B43_NPHY_H_ */ diff --git a/drivers/net/wireless/b43/rfkill.c b/drivers/net/wireless/b43/rfkill.c index fec5645944a..7b9e99adb8c 100644 --- a/drivers/net/wireless/b43/rfkill.c +++ b/drivers/net/wireless/b43/rfkill.c @@ -24,6 +24,7 @@ #include "rfkill.h" #include "b43.h" +#include "phy_common.h" #include <linux/kmod.h> @@ -114,11 +115,11 @@ static int b43_rfkill_soft_toggle(void *data, enum rfkill_state state) goto out_unlock; } if (!dev->phy.radio_on) - b43_radio_turn_on(dev); + b43_software_rfkill(dev, state); break; case RFKILL_STATE_SOFT_BLOCKED: if (dev->phy.radio_on) - b43_radio_turn_off(dev, 0); + b43_software_rfkill(dev, state); break; default: b43warn(wl, "Received unexpected rfkill state %d.\n", state); diff --git a/drivers/net/wireless/b43/sysfs.c b/drivers/net/wireless/b43/sysfs.c index 275095b8cbe..5adaa3692d7 100644 --- a/drivers/net/wireless/b43/sysfs.c +++ b/drivers/net/wireless/b43/sysfs.c @@ -29,7 +29,7 @@ #include "b43.h" #include "sysfs.h" #include "main.h" -#include "phy.h" +#include "phy_common.h" #define GENERIC_FILESIZE 64 @@ -59,7 +59,12 @@ static ssize_t b43_attr_interfmode_show(struct device *dev, mutex_lock(&wldev->wl->mutex); - switch (wldev->phy.interfmode) { + if (wldev->phy.type != B43_PHYTYPE_G) { + mutex_unlock(&wldev->wl->mutex); + return -ENOSYS; + } + + switch (wldev->phy.g->interfmode) { case B43_INTERFMODE_NONE: count = snprintf(buf, PAGE_SIZE, @@ -117,11 +122,15 @@ static ssize_t b43_attr_interfmode_store(struct device *dev, mutex_lock(&wldev->wl->mutex); spin_lock_irqsave(&wldev->wl->irq_lock, flags); - err = b43_radio_set_interference_mitigation(wldev, mode); - if (err) { - b43err(wldev->wl, "Interference Mitigation not " - "supported by device\n"); - } + if (wldev->phy.ops->interf_mitigation) { + err = wldev->phy.ops->interf_mitigation(wldev, mode); + if (err) { + b43err(wldev->wl, "Interference Mitigation not " + "supported by device\n"); + } + } else + err = -ENOSYS; + mmiowb(); spin_unlock_irqrestore(&wldev->wl->irq_lock, flags); mutex_unlock(&wldev->wl->mutex); diff --git a/drivers/net/wireless/b43/tables.c b/drivers/net/wireless/b43/tables.c index 3f5ea06bf13..1ef9a6463ec 100644 --- a/drivers/net/wireless/b43/tables.c +++ b/drivers/net/wireless/b43/tables.c @@ -27,7 +27,8 @@ #include "b43.h" #include "tables.h" -#include "phy.h" +#include "phy_g.h" + const u32 b43_tab_rotor[] = { 0xFEB93FFD, 0xFEC63FFD, /* 0 */ @@ -377,17 +378,17 @@ static inline void assert_sizes(void) u16 b43_ofdmtab_read16(struct b43_wldev *dev, u16 table, u16 offset) { - struct b43_phy *phy = &dev->phy; + struct b43_phy_g *gphy = dev->phy.g; u16 addr; addr = table + offset; - if ((phy->ofdmtab_addr_direction != B43_OFDMTAB_DIRECTION_READ) || - (addr - 1 != phy->ofdmtab_addr)) { + if ((gphy->ofdmtab_addr_direction != B43_OFDMTAB_DIRECTION_READ) || + (addr - 1 != gphy->ofdmtab_addr)) { /* The hardware has a different address in memory. Update it. */ b43_phy_write(dev, B43_PHY_OTABLECTL, addr); - phy->ofdmtab_addr_direction = B43_OFDMTAB_DIRECTION_READ; + gphy->ofdmtab_addr_direction = B43_OFDMTAB_DIRECTION_READ; } - phy->ofdmtab_addr = addr; + gphy->ofdmtab_addr = addr; return b43_phy_read(dev, B43_PHY_OTABLEI); @@ -398,34 +399,34 @@ u16 b43_ofdmtab_read16(struct b43_wldev *dev, u16 table, u16 offset) void b43_ofdmtab_write16(struct b43_wldev *dev, u16 table, u16 offset, u16 value) { - struct b43_phy *phy = &dev->phy; + struct b43_phy_g *gphy = dev->phy.g; u16 addr; addr = table + offset; - if ((phy->ofdmtab_addr_direction != B43_OFDMTAB_DIRECTION_WRITE) || - (addr - 1 != phy->ofdmtab_addr)) { + if ((gphy->ofdmtab_addr_direction != B43_OFDMTAB_DIRECTION_WRITE) || + (addr - 1 != gphy->ofdmtab_addr)) { /* The hardware has a different address in memory. Update it. */ b43_phy_write(dev, B43_PHY_OTABLECTL, addr); - phy->ofdmtab_addr_direction = B43_OFDMTAB_DIRECTION_WRITE; + gphy->ofdmtab_addr_direction = B43_OFDMTAB_DIRECTION_WRITE; } - phy->ofdmtab_addr = addr; + gphy->ofdmtab_addr = addr; b43_phy_write(dev, B43_PHY_OTABLEI, value); } u32 b43_ofdmtab_read32(struct b43_wldev *dev, u16 table, u16 offset) { - struct b43_phy *phy = &dev->phy; + struct b43_phy_g *gphy = dev->phy.g; u32 ret; u16 addr; addr = table + offset; - if ((phy->ofdmtab_addr_direction != B43_OFDMTAB_DIRECTION_READ) || - (addr - 1 != phy->ofdmtab_addr)) { + if ((gphy->ofdmtab_addr_direction != B43_OFDMTAB_DIRECTION_READ) || + (addr - 1 != gphy->ofdmtab_addr)) { /* The hardware has a different address in memory. Update it. */ b43_phy_write(dev, B43_PHY_OTABLECTL, addr); - phy->ofdmtab_addr_direction = B43_OFDMTAB_DIRECTION_READ; + gphy->ofdmtab_addr_direction = B43_OFDMTAB_DIRECTION_READ; } - phy->ofdmtab_addr = addr; + gphy->ofdmtab_addr = addr; ret = b43_phy_read(dev, B43_PHY_OTABLEQ); ret <<= 16; ret |= b43_phy_read(dev, B43_PHY_OTABLEI); @@ -436,17 +437,17 @@ u32 b43_ofdmtab_read32(struct b43_wldev *dev, u16 table, u16 offset) void b43_ofdmtab_write32(struct b43_wldev *dev, u16 table, u16 offset, u32 value) { - struct b43_phy *phy = &dev->phy; + struct b43_phy_g *gphy = dev->phy.g; u16 addr; addr = table + offset; - if ((phy->ofdmtab_addr_direction != B43_OFDMTAB_DIRECTION_WRITE) || - (addr - 1 != phy->ofdmtab_addr)) { + if ((gphy->ofdmtab_addr_direction != B43_OFDMTAB_DIRECTION_WRITE) || + (addr - 1 != gphy->ofdmtab_addr)) { /* The hardware has a different address in memory. Update it. */ b43_phy_write(dev, B43_PHY_OTABLECTL, addr); - phy->ofdmtab_addr_direction = B43_OFDMTAB_DIRECTION_WRITE; + gphy->ofdmtab_addr_direction = B43_OFDMTAB_DIRECTION_WRITE; } - phy->ofdmtab_addr = addr; + gphy->ofdmtab_addr = addr; b43_phy_write(dev, B43_PHY_OTABLEI, value); b43_phy_write(dev, B43_PHY_OTABLEQ, (value >> 16)); diff --git a/drivers/net/wireless/b43/tables_nphy.c b/drivers/net/wireless/b43/tables_nphy.c index 2aa57551786..4e233631554 100644 --- a/drivers/net/wireless/b43/tables_nphy.c +++ b/drivers/net/wireless/b43/tables_nphy.c @@ -24,8 +24,8 @@ #include "b43.h" #include "tables_nphy.h" -#include "phy.h" -#include "nphy.h" +#include "phy_common.h" +#include "phy_n.h" struct b2055_inittab_entry { diff --git a/drivers/net/wireless/b43/wa.c b/drivers/net/wireless/b43/wa.c index daa94211f83..0c0fb15abb9 100644 --- a/drivers/net/wireless/b43/wa.c +++ b/drivers/net/wireless/b43/wa.c @@ -27,7 +27,7 @@ #include "b43.h" #include "main.h" #include "tables.h" -#include "phy.h" +#include "phy_common.h" #include "wa.h" static void b43_wa_papd(struct b43_wldev *dev) diff --git a/drivers/net/wireless/b43/xmit.c b/drivers/net/wireless/b43/xmit.c index 9dda8169f7c..5e0b71c3ad0 100644 --- a/drivers/net/wireless/b43/xmit.c +++ b/drivers/net/wireless/b43/xmit.c @@ -28,7 +28,7 @@ */ #include "xmit.h" -#include "phy.h" +#include "phy_common.h" #include "dma.h" #include "pio.h" @@ -431,6 +431,7 @@ static s8 b43_rssi_postprocess(struct b43_wldev *dev, int adjust_2053, int adjust_2050) { struct b43_phy *phy = &dev->phy; + struct b43_phy_g *gphy = phy->g; s32 tmp; switch (phy->radio_ver) { @@ -450,7 +451,8 @@ static s8 b43_rssi_postprocess(struct b43_wldev *dev, boardflags_lo & B43_BFL_RSSI) { if (in_rssi > 63) in_rssi = 63; - tmp = phy->nrssi_lt[in_rssi]; + B43_WARN_ON(phy->type != B43_PHYTYPE_G); + tmp = gphy->nrssi_lt[in_rssi]; tmp = 31 - tmp; tmp *= -131; tmp /= 128; @@ -678,6 +680,8 @@ void b43_handle_txstatus(struct b43_wldev *dev, b43_pio_handle_txstatus(dev, status); else b43_dma_handle_txstatus(dev, status); + + b43_phy_txpower_check(dev, 0); } /* Fill out the mac80211 TXstatus report based on the b43-specific diff --git a/drivers/net/wireless/b43legacy/main.c b/drivers/net/wireless/b43legacy/main.c index 1cb77db5c29..68f63f5093a 100644 --- a/drivers/net/wireless/b43legacy/main.c +++ b/drivers/net/wireless/b43legacy/main.c @@ -3704,6 +3704,11 @@ static int b43legacy_wireless_init(struct ssb_device *dev) hw->flags = IEEE80211_HW_RX_INCLUDES_FCS | IEEE80211_HW_SIGNAL_DBM | IEEE80211_HW_NOISE_DBM; + hw->wiphy->interface_modes = + BIT(NL80211_IFTYPE_AP) | + BIT(NL80211_IFTYPE_STATION) | + BIT(NL80211_IFTYPE_WDS) | + BIT(NL80211_IFTYPE_ADHOC); hw->queues = 1; /* FIXME: hardware has more queues */ SET_IEEE80211_DEV(hw, dev->dev); if (is_valid_ether_addr(sprom->et1mac)) diff --git a/drivers/net/wireless/b43legacy/xmit.c b/drivers/net/wireless/b43legacy/xmit.c index 68e1f8c7872..c5ca72aa59e 100644 --- a/drivers/net/wireless/b43legacy/xmit.c +++ b/drivers/net/wireless/b43legacy/xmit.c @@ -193,7 +193,6 @@ static int generate_txhdr_fw3(struct b43legacy_wldev *dev, { const struct ieee80211_hdr *wlhdr; int use_encryption = !!info->control.hw_key; - u16 fctl; u8 rate; struct ieee80211_rate *rate_fb; int rate_ofdm; @@ -204,7 +203,6 @@ static int generate_txhdr_fw3(struct b43legacy_wldev *dev, struct ieee80211_rate *tx_rate; wlhdr = (const struct ieee80211_hdr *)fragment_data; - fctl = le16_to_cpu(wlhdr->frame_control); memset(txhdr, 0, sizeof(*txhdr)); @@ -253,7 +251,7 @@ static int generate_txhdr_fw3(struct b43legacy_wldev *dev, mac_ctl |= (key->algorithm << B43legacy_TX4_MAC_KEYALG_SHIFT) & B43legacy_TX4_MAC_KEYALG; - wlhdr_len = ieee80211_get_hdrlen(fctl); + wlhdr_len = ieee80211_hdrlen(wlhdr->frame_control); iv_len = min((size_t)info->control.iv_len, ARRAY_SIZE(txhdr->iv)); memcpy(txhdr->iv, ((u8 *)wlhdr) + wlhdr_len, iv_len); diff --git a/drivers/net/wireless/hermes.c b/drivers/net/wireless/hermes.c index 29d39105f5b..bfa375369df 100644 --- a/drivers/net/wireless/hermes.c +++ b/drivers/net/wireless/hermes.c @@ -87,7 +87,8 @@ MODULE_LICENSE("Dual MPL/GPL"); Callable from any context. */ -static int hermes_issue_cmd(hermes_t *hw, u16 cmd, u16 param0) +static int hermes_issue_cmd(hermes_t *hw, u16 cmd, u16 param0, + u16 param1, u16 param2) { int k = CMD_BUSY_TIMEOUT; u16 reg; @@ -103,8 +104,8 @@ static int hermes_issue_cmd(hermes_t *hw, u16 cmd, u16 param0) return -EBUSY; } - hermes_write_regn(hw, PARAM2, 0); - hermes_write_regn(hw, PARAM1, 0); + hermes_write_regn(hw, PARAM2, param2); + hermes_write_regn(hw, PARAM1, param1); hermes_write_regn(hw, PARAM0, param0); hermes_write_regn(hw, CMD, cmd); @@ -115,16 +116,72 @@ static int hermes_issue_cmd(hermes_t *hw, u16 cmd, u16 param0) * Function definitions */ +/* For doing cmds that wipe the magic constant in SWSUPPORT0 */ +int hermes_doicmd_wait(hermes_t *hw, u16 cmd, + u16 parm0, u16 parm1, u16 parm2, + struct hermes_response *resp) +{ + int err = 0; + int k; + u16 status, reg; + + err = hermes_issue_cmd(hw, cmd, parm0, parm1, parm2); + if (err) + return err; + + reg = hermes_read_regn(hw, EVSTAT); + k = CMD_INIT_TIMEOUT; + while ((!(reg & HERMES_EV_CMD)) && k) { + k--; + udelay(10); + reg = hermes_read_regn(hw, EVSTAT); + } + + hermes_write_regn(hw, SWSUPPORT0, HERMES_MAGIC); + + if (!hermes_present(hw)) { + DEBUG(0, "hermes @ 0x%x: Card removed during reset.\n", + hw->iobase); + err = -ENODEV; + goto out; + } + + if (!(reg & HERMES_EV_CMD)) { + printk(KERN_ERR "hermes @ %p: " + "Timeout waiting for card to reset (reg=0x%04x)!\n", + hw->iobase, reg); + err = -ETIMEDOUT; + goto out; + } + + status = hermes_read_regn(hw, STATUS); + if (resp) { + resp->status = status; + resp->resp0 = hermes_read_regn(hw, RESP0); + resp->resp1 = hermes_read_regn(hw, RESP1); + resp->resp2 = hermes_read_regn(hw, RESP2); + } + + hermes_write_regn(hw, EVACK, HERMES_EV_CMD); + + if (status & HERMES_STATUS_RESULT) + err = -EIO; +out: + return err; +} +EXPORT_SYMBOL(hermes_doicmd_wait); + void hermes_struct_init(hermes_t *hw, void __iomem *address, int reg_spacing) { hw->iobase = address; hw->reg_spacing = reg_spacing; hw->inten = 0x0; } +EXPORT_SYMBOL(hermes_struct_init); int hermes_init(hermes_t *hw) { - u16 status, reg; + u16 reg; int err = 0; int k; @@ -162,45 +219,11 @@ int hermes_init(hermes_t *hw) /* We don't use hermes_docmd_wait here, because the reset wipes the magic constant in SWSUPPORT0 away, and it gets confused */ - err = hermes_issue_cmd(hw, HERMES_CMD_INIT, 0); - if (err) - return err; - - reg = hermes_read_regn(hw, EVSTAT); - k = CMD_INIT_TIMEOUT; - while ( (! (reg & HERMES_EV_CMD)) && k) { - k--; - udelay(10); - reg = hermes_read_regn(hw, EVSTAT); - } - - hermes_write_regn(hw, SWSUPPORT0, HERMES_MAGIC); - - if (! hermes_present(hw)) { - DEBUG(0, "hermes @ 0x%x: Card removed during reset.\n", - hw->iobase); - err = -ENODEV; - goto out; - } - - if (! (reg & HERMES_EV_CMD)) { - printk(KERN_ERR "hermes @ %p: " - "Timeout waiting for card to reset (reg=0x%04x)!\n", - hw->iobase, reg); - err = -ETIMEDOUT; - goto out; - } + err = hermes_doicmd_wait(hw, HERMES_CMD_INIT, 0, 0, 0, NULL); - status = hermes_read_regn(hw, STATUS); - - hermes_write_regn(hw, EVACK, HERMES_EV_CMD); - - if (status & HERMES_STATUS_RESULT) - err = -EIO; - - out: return err; } +EXPORT_SYMBOL(hermes_init); /* Issue a command to the chip, and (busy!) wait for it to * complete. @@ -216,7 +239,7 @@ int hermes_docmd_wait(hermes_t *hw, u16 cmd, u16 parm0, u16 reg; u16 status; - err = hermes_issue_cmd(hw, cmd, parm0); + err = hermes_issue_cmd(hw, cmd, parm0, 0, 0); if (err) { if (! hermes_present(hw)) { if (net_ratelimit()) @@ -271,6 +294,7 @@ int hermes_docmd_wait(hermes_t *hw, u16 cmd, u16 parm0, out: return err; } +EXPORT_SYMBOL(hermes_docmd_wait); int hermes_allocate(hermes_t *hw, u16 size, u16 *fid) { @@ -313,7 +337,7 @@ int hermes_allocate(hermes_t *hw, u16 size, u16 *fid) return 0; } - +EXPORT_SYMBOL(hermes_allocate); /* Set up a BAP to read a particular chunk of data from card's internal buffer. * @@ -397,6 +421,7 @@ int hermes_bap_pread(hermes_t *hw, int bap, void *buf, int len, out: return err; } +EXPORT_SYMBOL(hermes_bap_pread); /* Write a block of data to the chip's buffer, via the * BAP. Synchronization/serialization is the caller's problem. @@ -422,6 +447,7 @@ int hermes_bap_pwrite(hermes_t *hw, int bap, const void *buf, int len, out: return err; } +EXPORT_SYMBOL(hermes_bap_pwrite); /* Read a Length-Type-Value record from the card. * @@ -463,7 +489,7 @@ int hermes_read_ltv(hermes_t *hw, int bap, u16 rid, unsigned bufsize, if (rtype != rid) printk(KERN_WARNING "hermes @ %p: %s(): " "rid (0x%04x) does not match type (0x%04x)\n", - hw->iobase, __FUNCTION__, rid, rtype); + hw->iobase, __func__, rid, rtype); if (HERMES_RECLEN_TO_BYTES(rlength) > bufsize) printk(KERN_WARNING "hermes @ %p: " "Truncating LTV record from %d to %d bytes. " @@ -475,6 +501,7 @@ int hermes_read_ltv(hermes_t *hw, int bap, u16 rid, unsigned bufsize, return 0; } +EXPORT_SYMBOL(hermes_read_ltv); int hermes_write_ltv(hermes_t *hw, int bap, u16 rid, u16 length, const void *value) @@ -497,20 +524,11 @@ int hermes_write_ltv(hermes_t *hw, int bap, u16 rid, hermes_write_bytes(hw, dreg, value, count << 1); - err = hermes_docmd_wait(hw, HERMES_CMD_ACCESS | HERMES_CMD_WRITE, + err = hermes_docmd_wait(hw, HERMES_CMD_ACCESS | HERMES_CMD_WRITE, rid, NULL); return err; } - -EXPORT_SYMBOL(hermes_struct_init); -EXPORT_SYMBOL(hermes_init); -EXPORT_SYMBOL(hermes_docmd_wait); -EXPORT_SYMBOL(hermes_allocate); - -EXPORT_SYMBOL(hermes_bap_pread); -EXPORT_SYMBOL(hermes_bap_pwrite); -EXPORT_SYMBOL(hermes_read_ltv); EXPORT_SYMBOL(hermes_write_ltv); static int __init init_hermes(void) diff --git a/drivers/net/wireless/hermes.h b/drivers/net/wireless/hermes.h index 8e3f0e3edb5..8b13c8fef3d 100644 --- a/drivers/net/wireless/hermes.h +++ b/drivers/net/wireless/hermes.h @@ -179,17 +179,23 @@ #define HERMES_802_11_OFFSET (14) #define HERMES_802_3_OFFSET (14+32) #define HERMES_802_2_OFFSET (14+32+14) +#define HERMES_TXCNTL2_OFFSET (HERMES_802_3_OFFSET - 2) #define HERMES_RXSTAT_ERR (0x0003) #define HERMES_RXSTAT_BADCRC (0x0001) #define HERMES_RXSTAT_UNDECRYPTABLE (0x0002) +#define HERMES_RXSTAT_MIC (0x0010) /* Frame contains MIC */ #define HERMES_RXSTAT_MACPORT (0x0700) #define HERMES_RXSTAT_PCF (0x1000) /* Frame was received in CF period */ +#define HERMES_RXSTAT_MIC_KEY_ID (0x1800) /* MIC key used */ #define HERMES_RXSTAT_MSGTYPE (0xE000) #define HERMES_RXSTAT_1042 (0x2000) /* RFC-1042 frame */ #define HERMES_RXSTAT_TUNNEL (0x4000) /* bridge-tunnel encoded frame */ #define HERMES_RXSTAT_WMP (0x6000) /* Wavelan-II Management Protocol frame */ +/* Shift amount for key ID in RXSTAT and TXCTRL */ +#define HERMES_MIC_KEY_ID_SHIFT 11 + struct hermes_tx_descriptor { __le16 status; __le16 reserved1; @@ -208,6 +214,8 @@ struct hermes_tx_descriptor { #define HERMES_TXCTRL_TX_OK (0x0002) /* ?? interrupt on Tx complete */ #define HERMES_TXCTRL_TX_EX (0x0004) /* ?? interrupt on Tx exception */ #define HERMES_TXCTRL_802_11 (0x0008) /* We supply 802.11 header */ +#define HERMES_TXCTRL_MIC (0x0010) /* 802.3 + TKIP */ +#define HERMES_TXCTRL_MIC_KEY_ID (0x1800) /* MIC Key ID mask */ #define HERMES_TXCTRL_ALT_RTRY (0x0020) /* Inquiry constants and data types */ @@ -302,6 +310,40 @@ union hermes_scan_info { struct symbol_scan_apinfo s; }; +/* Extended scan struct for HERMES_INQ_CHANNELINFO. + * wl_lkm calls this an ACS scan (Automatic Channel Select). + * Keep out of union hermes_scan_info because it is much bigger than + * the older scan structures. */ +struct agere_ext_scan_info { + __le16 reserved0; + + u8 noise; + u8 level; + u8 rx_flow; + u8 rate; + __le16 reserved1[2]; + + __le16 frame_control; + __le16 dur_id; + u8 addr1[ETH_ALEN]; + u8 addr2[ETH_ALEN]; + u8 bssid[ETH_ALEN]; + __le16 sequence; + u8 addr4[ETH_ALEN]; + + __le16 data_length; + + /* Next 3 fields do not get filled in. */ + u8 daddr[ETH_ALEN]; + u8 saddr[ETH_ALEN]; + __le16 len_type; + + __le64 timestamp; + __le16 beacon_interval; + __le16 capabilities; + u8 data[316]; +} __attribute__ ((packed)); + #define HERMES_LINKSTATUS_NOT_CONNECTED (0x0000) #define HERMES_LINKSTATUS_CONNECTED (0x0001) #define HERMES_LINKSTATUS_DISCONNECTED (0x0002) @@ -353,6 +395,9 @@ void hermes_struct_init(hermes_t *hw, void __iomem *address, int reg_spacing); int hermes_init(hermes_t *hw); int hermes_docmd_wait(hermes_t *hw, u16 cmd, u16 parm0, struct hermes_response *resp); +int hermes_doicmd_wait(hermes_t *hw, u16 cmd, + u16 parm0, u16 parm1, u16 parm2, + struct hermes_response *resp); int hermes_allocate(hermes_t *hw, u16 size, u16 *fid); int hermes_bap_pread(hermes_t *hw, int bap, void *buf, int len, diff --git a/drivers/net/wireless/hermes_dld.c b/drivers/net/wireless/hermes_dld.c new file mode 100644 index 00000000000..d8c626e61a3 --- /dev/null +++ b/drivers/net/wireless/hermes_dld.c @@ -0,0 +1,730 @@ +/* + * Hermes download helper driver. + * + * This could be entirely merged into hermes.c. + * + * I'm keeping it separate to minimise the amount of merging between + * kernel upgrades. It also means the memory overhead for drivers that + * don't need firmware download low. + * + * This driver: + * - is capable of writing to the volatile area of the hermes device + * - is currently not capable of writing to non-volatile areas + * - provide helpers to identify and update plugin data + * - is not capable of interpreting a fw image directly. That is up to + * the main card driver. + * - deals with Hermes I devices. It can probably be modified to deal + * with Hermes II devices + * + * Copyright (C) 2007, David Kilroy + * + * Plug data code slightly modified from spectrum_cs driver + * Copyright (C) 2002-2005 Pavel Roskin <proski@gnu.org> + * Portions based on information in wl_lkm_718 Agere driver + * COPYRIGHT (C) 2001-2004 by Agere Systems Inc. All Rights Reserved + * + * The contents of this file are subject to the Mozilla Public License + * Version 1.1 (the "License"); you may not use this file except in + * compliance with the License. You may obtain a copy of the License + * at http://www.mozilla.org/MPL/ + * + * Software distributed under the License is distributed on an "AS IS" + * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See + * the License for the specific language governing rights and + * limitations under the License. + * + * Alternatively, the contents of this file may be used under the + * terms of the GNU General Public License version 2 (the "GPL"), in + * which case the provisions of the GPL are applicable instead of the + * above. If you wish to allow the use of your version of this file + * only under the terms of the GPL and not to allow others to use your + * version of this file under the MPL, indicate your decision by + * deleting the provisions above and replace them with the notice and + * other provisions required by the GPL. If you do not delete the + * provisions above, a recipient may use your version of this file + * under either the MPL or the GPL. + */ + +#include <linux/module.h> +#include <linux/delay.h> +#include "hermes.h" +#include "hermes_dld.h" + +MODULE_DESCRIPTION("Download helper for Lucent Hermes chipset"); +MODULE_AUTHOR("David Kilroy <kilroyd@gmail.com>"); +MODULE_LICENSE("Dual MPL/GPL"); + +#define PFX "hermes_dld: " + +/* + * AUX port access. To unlock the AUX port write the access keys to the + * PARAM0-2 registers, then write HERMES_AUX_ENABLE to the HERMES_CONTROL + * register. Then read it and make sure it's HERMES_AUX_ENABLED. + */ +#define HERMES_AUX_ENABLE 0x8000 /* Enable auxiliary port access */ +#define HERMES_AUX_DISABLE 0x4000 /* Disable to auxiliary port access */ +#define HERMES_AUX_ENABLED 0xC000 /* Auxiliary port is open */ +#define HERMES_AUX_DISABLED 0x0000 /* Auxiliary port is closed */ + +#define HERMES_AUX_PW0 0xFE01 +#define HERMES_AUX_PW1 0xDC23 +#define HERMES_AUX_PW2 0xBA45 + +/* HERMES_CMD_DOWNLD */ +#define HERMES_PROGRAM_DISABLE (0x0000 | HERMES_CMD_DOWNLD) +#define HERMES_PROGRAM_ENABLE_VOLATILE (0x0100 | HERMES_CMD_DOWNLD) +#define HERMES_PROGRAM_ENABLE_NON_VOLATILE (0x0200 | HERMES_CMD_DOWNLD) +#define HERMES_PROGRAM_NON_VOLATILE (0x0300 | HERMES_CMD_DOWNLD) + +/* End markers used in dblocks */ +#define PDI_END 0x00000000 /* End of PDA */ +#define BLOCK_END 0xFFFFFFFF /* Last image block */ +#define TEXT_END 0x1A /* End of text header */ + +/* + * PDA == Production Data Area + * + * In principle, the max. size of the PDA is is 4096 words. Currently, + * however, only about 500 bytes of this area are used. + * + * Some USB implementations can't handle sizes in excess of 1016. Note + * that PDA is not actually used in those USB environments, but may be + * retrieved by common code. + */ +#define MAX_PDA_SIZE 1000 + +/* Limit the amout we try to download in a single shot. + * Size is in bytes. + */ +#define MAX_DL_SIZE 1024 +#define LIMIT_PROGRAM_SIZE 0 + +/* + * The following structures have little-endian fields denoted by + * the leading underscore. Don't access them directly - use inline + * functions defined below. + */ + +/* + * The binary image to be downloaded consists of series of data blocks. + * Each block has the following structure. + */ +struct dblock { + __le32 addr; /* adapter address where to write the block */ + __le16 len; /* length of the data only, in bytes */ + char data[0]; /* data to be written */ +} __attribute__ ((packed)); + +/* + * Plug Data References are located in in the image after the last data + * block. They refer to areas in the adapter memory where the plug data + * items with matching ID should be written. + */ +struct pdr { + __le32 id; /* record ID */ + __le32 addr; /* adapter address where to write the data */ + __le32 len; /* expected length of the data, in bytes */ + char next[0]; /* next PDR starts here */ +} __attribute__ ((packed)); + +/* + * Plug Data Items are located in the EEPROM read from the adapter by + * primary firmware. They refer to the device-specific data that should + * be plugged into the secondary firmware. + */ +struct pdi { + __le16 len; /* length of ID and data, in words */ + __le16 id; /* record ID */ + char data[0]; /* plug data */ +} __attribute__ ((packed)); + +/*** FW data block access functions ***/ + +static inline u32 +dblock_addr(const struct dblock *blk) +{ + return le32_to_cpu(blk->addr); +} + +static inline u32 +dblock_len(const struct dblock *blk) +{ + return le16_to_cpu(blk->len); +} + +/*** PDR Access functions ***/ + +static inline u32 +pdr_id(const struct pdr *pdr) +{ + return le32_to_cpu(pdr->id); +} + +static inline u32 +pdr_addr(const struct pdr *pdr) +{ + return le32_to_cpu(pdr->addr); +} + +static inline u32 +pdr_len(const struct pdr *pdr) +{ + return le32_to_cpu(pdr->len); +} + +/*** PDI Access functions ***/ + +static inline u32 +pdi_id(const struct pdi *pdi) +{ + return le16_to_cpu(pdi->id); +} + +/* Return length of the data only, in bytes */ +static inline u32 +pdi_len(const struct pdi *pdi) +{ + return 2 * (le16_to_cpu(pdi->len) - 1); +} + +/*** Hermes AUX control ***/ + +static inline void +hermes_aux_setaddr(hermes_t *hw, u32 addr) +{ + hermes_write_reg(hw, HERMES_AUXPAGE, (u16) (addr >> 7)); + hermes_write_reg(hw, HERMES_AUXOFFSET, (u16) (addr & 0x7F)); +} + +static inline int +hermes_aux_control(hermes_t *hw, int enabled) +{ + int desired_state = enabled ? HERMES_AUX_ENABLED : HERMES_AUX_DISABLED; + int action = enabled ? HERMES_AUX_ENABLE : HERMES_AUX_DISABLE; + int i; + + /* Already open? */ + if (hermes_read_reg(hw, HERMES_CONTROL) == desired_state) + return 0; + + hermes_write_reg(hw, HERMES_PARAM0, HERMES_AUX_PW0); + hermes_write_reg(hw, HERMES_PARAM1, HERMES_AUX_PW1); + hermes_write_reg(hw, HERMES_PARAM2, HERMES_AUX_PW2); + hermes_write_reg(hw, HERMES_CONTROL, action); + + for (i = 0; i < 20; i++) { + udelay(10); + if (hermes_read_reg(hw, HERMES_CONTROL) == + desired_state) + return 0; + } + + return -EBUSY; +} + +/*** Plug Data Functions ***/ + +/* + * Scan PDR for the record with the specified RECORD_ID. + * If it's not found, return NULL. + */ +static struct pdr * +hermes_find_pdr(struct pdr *first_pdr, u32 record_id) +{ + struct pdr *pdr = first_pdr; + void *end = (void *)first_pdr + MAX_PDA_SIZE; + + while (((void *)pdr < end) && + (pdr_id(pdr) != PDI_END)) { + /* + * PDR area is currently not terminated by PDI_END. + * It's followed by CRC records, which have the type + * field where PDR has length. The type can be 0 or 1. + */ + if (pdr_len(pdr) < 2) + return NULL; + + /* If the record ID matches, we are done */ + if (pdr_id(pdr) == record_id) + return pdr; + + pdr = (struct pdr *) pdr->next; + } + return NULL; +} + +/* Scan production data items for a particular entry */ +static struct pdi * +hermes_find_pdi(struct pdi *first_pdi, u32 record_id) +{ + struct pdi *pdi = first_pdi; + + while (pdi_id(pdi) != PDI_END) { + + /* If the record ID matches, we are done */ + if (pdi_id(pdi) == record_id) + return pdi; + + pdi = (struct pdi *) &pdi->data[pdi_len(pdi)]; + } + return NULL; +} + +/* Process one Plug Data Item - find corresponding PDR and plug it */ +static int +hermes_plug_pdi(hermes_t *hw, struct pdr *first_pdr, const struct pdi *pdi) +{ + struct pdr *pdr; + + /* Find the PDR corresponding to this PDI */ + pdr = hermes_find_pdr(first_pdr, pdi_id(pdi)); + + /* No match is found, safe to ignore */ + if (!pdr) + return 0; + + /* Lengths of the data in PDI and PDR must match */ + if (pdi_len(pdi) != pdr_len(pdr)) + return -EINVAL; + + /* do the actual plugging */ + hermes_aux_setaddr(hw, pdr_addr(pdr)); + hermes_write_bytes(hw, HERMES_AUXDATA, pdi->data, pdi_len(pdi)); + + return 0; +} + +/* Read PDA from the adapter */ +int hermes_read_pda(hermes_t *hw, + __le16 *pda, + u32 pda_addr, + u16 pda_len, + int use_eeprom) /* can we get this into hw? */ +{ + int ret; + u16 pda_size; + u16 data_len = pda_len; + __le16 *data = pda; + + if (use_eeprom) { + /* PDA of spectrum symbol is in eeprom */ + + /* Issue command to read EEPROM */ + ret = hermes_docmd_wait(hw, HERMES_CMD_READMIF, 0, NULL); + if (ret) + return ret; + } else { + /* wl_lkm does not include PDA size in the PDA area. + * We will pad the information into pda, so other routines + * don't have to be modified */ + pda[0] = cpu_to_le16(pda_len - 2); + /* Includes CFG_PROD_DATA but not itself */ + pda[1] = cpu_to_le16(0x0800); /* CFG_PROD_DATA */ + data_len = pda_len - 4; + data = pda + 2; + } + + /* Open auxiliary port */ + ret = hermes_aux_control(hw, 1); + printk(KERN_DEBUG PFX "AUX enable returned %d\n", ret); + if (ret) + return ret; + + /* read PDA from EEPROM */ + hermes_aux_setaddr(hw, pda_addr); + hermes_read_words(hw, HERMES_AUXDATA, data, data_len / 2); + + /* Close aux port */ + ret = hermes_aux_control(hw, 0); + printk(KERN_DEBUG PFX "AUX disable returned %d\n", ret); + + /* Check PDA length */ + pda_size = le16_to_cpu(pda[0]); + printk(KERN_DEBUG PFX "Actual PDA length %d, Max allowed %d\n", + pda_size, pda_len); + if (pda_size > pda_len) + return -EINVAL; + + return 0; +} +EXPORT_SYMBOL(hermes_read_pda); + +/* Parse PDA and write the records into the adapter + * + * Attempt to write every records that is in the specified pda + * which also has a valid production data record for the firmware. + */ +int hermes_apply_pda(hermes_t *hw, + const char *first_pdr, + const __le16 *pda) +{ + int ret; + const struct pdi *pdi; + struct pdr *pdr; + + pdr = (struct pdr *) first_pdr; + + /* Go through every PDI and plug them into the adapter */ + pdi = (const struct pdi *) (pda + 2); + while (pdi_id(pdi) != PDI_END) { + ret = hermes_plug_pdi(hw, pdr, pdi); + if (ret) + return ret; + + /* Increment to the next PDI */ + pdi = (const struct pdi *) &pdi->data[pdi_len(pdi)]; + } + return 0; +} +EXPORT_SYMBOL(hermes_apply_pda); + +/* Identify the total number of bytes in all blocks + * including the header data. + */ +size_t +hermes_blocks_length(const char *first_block) +{ + const struct dblock *blk = (const struct dblock *) first_block; + int total_len = 0; + int len; + + /* Skip all blocks to locate Plug Data References + * (Spectrum CS) */ + while (dblock_addr(blk) != BLOCK_END) { + len = dblock_len(blk); + total_len += sizeof(*blk) + len; + blk = (struct dblock *) &blk->data[len]; + } + + return total_len; +} +EXPORT_SYMBOL(hermes_blocks_length); + +/*** Hermes programming ***/ + +/* About to start programming data (Hermes I) + * offset is the entry point + * + * Spectrum_cs' Symbol fw does not require this + * wl_lkm Agere fw does + * Don't know about intersil + */ +int hermesi_program_init(hermes_t *hw, u32 offset) +{ + int err; + + /* Disable interrupts?*/ + /*hw->inten = 0x0;*/ + /*hermes_write_regn(hw, INTEN, 0);*/ + /*hermes_set_irqmask(hw, 0);*/ + + /* Acknowledge any outstanding command */ + hermes_write_regn(hw, EVACK, 0xFFFF); + + /* Using doicmd_wait rather than docmd_wait */ + err = hermes_doicmd_wait(hw, + 0x0100 | HERMES_CMD_INIT, + 0, 0, 0, NULL); + if (err) + return err; + + err = hermes_doicmd_wait(hw, + 0x0000 | HERMES_CMD_INIT, + 0, 0, 0, NULL); + if (err) + return err; + + err = hermes_aux_control(hw, 1); + printk(KERN_DEBUG PFX "AUX enable returned %d\n", err); + + if (err) + return err; + + printk(KERN_DEBUG PFX "Enabling volatile, EP 0x%08x\n", offset); + err = hermes_doicmd_wait(hw, + HERMES_PROGRAM_ENABLE_VOLATILE, + offset & 0xFFFFu, + offset >> 16, + 0, + NULL); + printk(KERN_DEBUG PFX "PROGRAM_ENABLE returned %d\n", + err); + + return err; +} +EXPORT_SYMBOL(hermesi_program_init); + +/* Done programming data (Hermes I) + * + * Spectrum_cs' Symbol fw does not require this + * wl_lkm Agere fw does + * Don't know about intersil + */ +int hermesi_program_end(hermes_t *hw) +{ + struct hermes_response resp; + int rc = 0; + int err; + + rc = hermes_docmd_wait(hw, HERMES_PROGRAM_DISABLE, 0, &resp); + + printk(KERN_DEBUG PFX "PROGRAM_DISABLE returned %d, " + "r0 0x%04x, r1 0x%04x, r2 0x%04x\n", + rc, resp.resp0, resp.resp1, resp.resp2); + + if ((rc == 0) && + ((resp.status & HERMES_STATUS_CMDCODE) != HERMES_CMD_DOWNLD)) + rc = -EIO; + + err = hermes_aux_control(hw, 0); + printk(KERN_DEBUG PFX "AUX disable returned %d\n", err); + + /* Acknowledge any outstanding command */ + hermes_write_regn(hw, EVACK, 0xFFFF); + + /* Reinitialise, ignoring return */ + (void) hermes_doicmd_wait(hw, 0x0000 | HERMES_CMD_INIT, + 0, 0, 0, NULL); + + return rc ? rc : err; +} +EXPORT_SYMBOL(hermesi_program_end); + +/* Program the data blocks */ +int hermes_program(hermes_t *hw, const char *first_block, const char *end) +{ + const struct dblock *blk; + u32 blkaddr; + u32 blklen; +#if LIMIT_PROGRAM_SIZE + u32 addr; + u32 len; +#endif + + blk = (const struct dblock *) first_block; + + if ((const char *) blk > (end - sizeof(*blk))) + return -EIO; + + blkaddr = dblock_addr(blk); + blklen = dblock_len(blk); + + while ((blkaddr != BLOCK_END) && + (((const char *) blk + blklen) <= end)) { + printk(KERN_DEBUG PFX + "Programming block of length %d to address 0x%08x\n", + blklen, blkaddr); + +#if !LIMIT_PROGRAM_SIZE + /* wl_lkm driver splits this into writes of 2000 bytes */ + hermes_aux_setaddr(hw, blkaddr); + hermes_write_bytes(hw, HERMES_AUXDATA, blk->data, + blklen); +#else + len = (blklen < MAX_DL_SIZE) ? blklen : MAX_DL_SIZE; + addr = blkaddr; + + while (addr < (blkaddr + blklen)) { + printk(KERN_DEBUG PFX + "Programming subblock of length %d " + "to address 0x%08x. Data @ %p\n", + len, addr, &blk->data[addr - blkaddr]); + + hermes_aux_setaddr(hw, addr); + hermes_write_bytes(hw, HERMES_AUXDATA, + &blk->data[addr - blkaddr], + len); + + addr += len; + len = ((blkaddr + blklen - addr) < MAX_DL_SIZE) ? + (blkaddr + blklen - addr) : MAX_DL_SIZE; + } +#endif + blk = (const struct dblock *) &blk->data[blklen]; + + if ((const char *) blk > (end - sizeof(*blk))) + return -EIO; + + blkaddr = dblock_addr(blk); + blklen = dblock_len(blk); + } + return 0; +} +EXPORT_SYMBOL(hermes_program); + +static int __init init_hermes_dld(void) +{ + return 0; +} + +static void __exit exit_hermes_dld(void) +{ +} + +module_init(init_hermes_dld); +module_exit(exit_hermes_dld); + +/*** Default plugging data for Hermes I ***/ +/* Values from wl_lkm_718/hcf/dhf.c */ + +#define DEFINE_DEFAULT_PDR(pid, length, data) \ +static const struct { \ + __le16 len; \ + __le16 id; \ + u8 val[length]; \ +} __attribute__ ((packed)) default_pdr_data_##pid = { \ + __constant_cpu_to_le16((sizeof(default_pdr_data_##pid)/ \ + sizeof(__le16)) - 1), \ + __constant_cpu_to_le16(pid), \ + data \ +} + +#define DEFAULT_PDR(pid) default_pdr_data_##pid + +/* HWIF Compatiblity */ +DEFINE_DEFAULT_PDR(0x0005, 10, "\x00\x00\x06\x00\x01\x00\x01\x00\x01\x00"); + +/* PPPPSign */ +DEFINE_DEFAULT_PDR(0x0108, 4, "\x00\x00\x00\x00"); + +/* PPPPProf */ +DEFINE_DEFAULT_PDR(0x0109, 10, "\x00\x00\x00\x00\x03\x00\x00\x00\x00\x00"); + +/* Antenna diversity */ +DEFINE_DEFAULT_PDR(0x0150, 2, "\x00\x3F"); + +/* Modem VCO band Set-up */ +DEFINE_DEFAULT_PDR(0x0160, 28, + "\x00\x00\x00\x00\x00\x00\x00\x00" + "\x00\x00\x00\x00\x00\x00\x00\x00" + "\x00\x00\x00\x00\x00\x00\x00\x00" + "\x00\x00\x00\x00"); + +/* Modem Rx Gain Table Values */ +DEFINE_DEFAULT_PDR(0x0161, 256, + "\x3F\x01\x3F\01\x3F\x01\x3F\x01" + "\x3F\x01\x3F\01\x3F\x01\x3F\x01" + "\x3F\x01\x3F\01\x3F\x01\x3F\x01" + "\x3F\x01\x3F\01\x3F\x01\x3F\x01" + "\x3F\x01\x3E\01\x3E\x01\x3D\x01" + "\x3D\x01\x3C\01\x3C\x01\x3B\x01" + "\x3B\x01\x3A\01\x3A\x01\x39\x01" + "\x39\x01\x38\01\x38\x01\x37\x01" + "\x37\x01\x36\01\x36\x01\x35\x01" + "\x35\x01\x34\01\x34\x01\x33\x01" + "\x33\x01\x32\x01\x32\x01\x31\x01" + "\x31\x01\x30\x01\x30\x01\x7B\x01" + "\x7B\x01\x7A\x01\x7A\x01\x79\x01" + "\x79\x01\x78\x01\x78\x01\x77\x01" + "\x77\x01\x76\x01\x76\x01\x75\x01" + "\x75\x01\x74\x01\x74\x01\x73\x01" + "\x73\x01\x72\x01\x72\x01\x71\x01" + "\x71\x01\x70\x01\x70\x01\x68\x01" + "\x68\x01\x67\x01\x67\x01\x66\x01" + "\x66\x01\x65\x01\x65\x01\x57\x01" + "\x57\x01\x56\x01\x56\x01\x55\x01" + "\x55\x01\x54\x01\x54\x01\x53\x01" + "\x53\x01\x52\x01\x52\x01\x51\x01" + "\x51\x01\x50\x01\x50\x01\x48\x01" + "\x48\x01\x47\x01\x47\x01\x46\x01" + "\x46\x01\x45\x01\x45\x01\x44\x01" + "\x44\x01\x43\x01\x43\x01\x42\x01" + "\x42\x01\x41\x01\x41\x01\x40\x01" + "\x40\x01\x40\x01\x40\x01\x40\x01" + "\x40\x01\x40\x01\x40\x01\x40\x01" + "\x40\x01\x40\x01\x40\x01\x40\x01" + "\x40\x01\x40\x01\x40\x01\x40\x01"); + +/* Write PDA according to certain rules. + * + * For every production data record, look for a previous setting in + * the pda, and use that. + * + * For certain records, use defaults if they are not found in pda. + */ +int hermes_apply_pda_with_defaults(hermes_t *hw, + const char *first_pdr, + const __le16 *pda) +{ + const struct pdr *pdr = (const struct pdr *) first_pdr; + struct pdi *first_pdi = (struct pdi *) &pda[2]; + struct pdi *pdi; + struct pdi *default_pdi = NULL; + struct pdi *outdoor_pdi; + void *end = (void *)first_pdr + MAX_PDA_SIZE; + int record_id; + + while (((void *)pdr < end) && + (pdr_id(pdr) != PDI_END)) { + /* + * For spectrum_cs firmwares, + * PDR area is currently not terminated by PDI_END. + * It's followed by CRC records, which have the type + * field where PDR has length. The type can be 0 or 1. + */ + if (pdr_len(pdr) < 2) + break; + record_id = pdr_id(pdr); + + pdi = hermes_find_pdi(first_pdi, record_id); + if (pdi) + printk(KERN_DEBUG PFX "Found record 0x%04x at %p\n", + record_id, pdi); + + switch (record_id) { + case 0x110: /* Modem REFDAC values */ + case 0x120: /* Modem VGDAC values */ + outdoor_pdi = hermes_find_pdi(first_pdi, record_id + 1); + default_pdi = NULL; + if (outdoor_pdi) { + pdi = outdoor_pdi; + printk(KERN_DEBUG PFX + "Using outdoor record 0x%04x at %p\n", + record_id + 1, pdi); + } + break; + case 0x5: /* HWIF Compatiblity */ + default_pdi = (struct pdi *) &DEFAULT_PDR(0x0005); + break; + case 0x108: /* PPPPSign */ + default_pdi = (struct pdi *) &DEFAULT_PDR(0x0108); + break; + case 0x109: /* PPPPProf */ + default_pdi = (struct pdi *) &DEFAULT_PDR(0x0109); + break; + case 0x150: /* Antenna diversity */ + default_pdi = (struct pdi *) &DEFAULT_PDR(0x0150); + break; + case 0x160: /* Modem VCO band Set-up */ + default_pdi = (struct pdi *) &DEFAULT_PDR(0x0160); + break; + case 0x161: /* Modem Rx Gain Table Values */ + default_pdi = (struct pdi *) &DEFAULT_PDR(0x0161); + break; + default: + default_pdi = NULL; + break; + } + if (!pdi && default_pdi) { + /* Use default */ + pdi = default_pdi; + printk(KERN_DEBUG PFX + "Using default record 0x%04x at %p\n", + record_id, pdi); + } + + if (pdi) { + /* Lengths of the data in PDI and PDR must match */ + if (pdi_len(pdi) == pdr_len(pdr)) { + /* do the actual plugging */ + hermes_aux_setaddr(hw, pdr_addr(pdr)); + hermes_write_bytes(hw, HERMES_AUXDATA, + pdi->data, pdi_len(pdi)); + } + } + + pdr++; + } + return 0; +} +EXPORT_SYMBOL(hermes_apply_pda_with_defaults); diff --git a/drivers/net/wireless/hermes_dld.h b/drivers/net/wireless/hermes_dld.h new file mode 100644 index 00000000000..6fcb2627799 --- /dev/null +++ b/drivers/net/wireless/hermes_dld.h @@ -0,0 +1,48 @@ +/* + * Copyright (C) 2007, David Kilroy + * + * The contents of this file are subject to the Mozilla Public License + * Version 1.1 (the "License"); you may not use this file except in + * compliance with the License. You may obtain a copy of the License + * at http://www.mozilla.org/MPL/ + * + * Software distributed under the License is distributed on an "AS IS" + * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See + * the License for the specific language governing rights and + * limitations under the License. + * + * Alternatively, the contents of this file may be used under the + * terms of the GNU General Public License version 2 (the "GPL"), in + * which case the provisions of the GPL are applicable instead of the + * above. If you wish to allow the use of your version of this file + * only under the terms of the GPL and not to allow others to use your + * version of this file under the MPL, indicate your decision by + * deleting the provisions above and replace them with the notice and + * other provisions required by the GPL. If you do not delete the + * provisions above, a recipient may use your version of this file + * under either the MPL or the GPL. + */ +#ifndef _HERMES_DLD_H +#define _HERMES_DLD_H + +#include "hermes.h" + +int hermesi_program_init(hermes_t *hw, u32 offset); +int hermesi_program_end(hermes_t *hw); +int hermes_program(hermes_t *hw, const char *first_block, const char *end); + +int hermes_read_pda(hermes_t *hw, + __le16 *pda, + u32 pda_addr, + u16 pda_len, + int use_eeprom); +int hermes_apply_pda(hermes_t *hw, + const char *first_pdr, + const __le16 *pda); +int hermes_apply_pda_with_defaults(hermes_t *hw, + const char *first_pdr, + const __le16 *pda); + +size_t hermes_blocks_length(const char *first_block); + +#endif /* _HERMES_DLD_H */ diff --git a/drivers/net/wireless/hermes_rid.h b/drivers/net/wireless/hermes_rid.h index 4f46b4809e5..42eb67dea1d 100644 --- a/drivers/net/wireless/hermes_rid.h +++ b/drivers/net/wireless/hermes_rid.h @@ -30,6 +30,7 @@ #define HERMES_RID_CNFWEPENABLED_AGERE 0xFC20 #define HERMES_RID_CNFAUTHENTICATION_AGERE 0xFC21 #define HERMES_RID_CNFMANDATORYBSSID_SYMBOL 0xFC21 +#define HERMES_RID_CNFDROPUNENCRYPTED 0xFC22 #define HERMES_RID_CNFWEPDEFAULTKEYID 0xFC23 #define HERMES_RID_CNFDEFAULTKEY0 0xFC24 #define HERMES_RID_CNFDEFAULTKEY1 0xFC25 @@ -85,6 +86,16 @@ #define HERMES_RID_CNFSCANSSID_AGERE 0xFCB2 #define HERMES_RID_CNFBASICRATES 0xFCB3 #define HERMES_RID_CNFSUPPORTEDRATES 0xFCB4 +#define HERMES_RID_CNFADDDEFAULTTKIPKEY_AGERE 0xFCB4 +#define HERMES_RID_CNFSETWPAAUTHMGMTSUITE_AGERE 0xFCB5 +#define HERMES_RID_CNFREMDEFAULTTKIPKEY_AGERE 0xFCB6 +#define HERMES_RID_CNFADDMAPPEDTKIPKEY_AGERE 0xFCB7 +#define HERMES_RID_CNFREMMAPPEDTKIPKEY_AGERE 0xFCB8 +#define HERMES_RID_CNFSETWPACAPABILITIES_AGERE 0xFCB9 +#define HERMES_RID_CNFCACHEDPMKADDRESS 0xFCBA +#define HERMES_RID_CNFREMOVEPMKADDRESS 0xFCBB +#define HERMES_RID_CNFSCANCHANNELS2GHZ 0xFCC2 +#define HERMES_RID_CNFDISASSOCIATE 0xFCC8 #define HERMES_RID_CNFTICKTIME 0xFCE0 #define HERMES_RID_CNFSCANREQUEST 0xFCE1 #define HERMES_RID_CNFJOINREQUEST 0xFCE2 @@ -137,6 +148,12 @@ #define HERMES_RID_CURRENTTXRATE6 0xFD85 #define HERMES_RID_OWNMACADDR 0xFD86 #define HERMES_RID_SCANRESULTSTABLE 0xFD88 +#define HERMES_RID_CURRENT_COUNTRY_INFO 0xFD89 +#define HERMES_RID_CURRENT_WPA_IE 0xFD8A +#define HERMES_RID_CURRENT_TKIP_IV 0xFD8B +#define HERMES_RID_CURRENT_ASSOC_REQ_INFO 0xFD8C +#define HERMES_RID_CURRENT_ASSOC_RESP_INFO 0xFD8D +#define HERMES_RID_TXQUEUEEMPTY 0xFD91 #define HERMES_RID_PHYTYPE 0xFDC0 #define HERMES_RID_CURRENTCHANNEL 0xFDC1 #define HERMES_RID_CURRENTPOWERSTATE 0xFDC2 diff --git a/drivers/net/wireless/ipw2100.c b/drivers/net/wireless/ipw2100.c index 19a401c4a0d..bca74811bc7 100644 --- a/drivers/net/wireless/ipw2100.c +++ b/drivers/net/wireless/ipw2100.c @@ -211,7 +211,7 @@ static u32 ipw2100_debug_level = IPW_DL_NONE; do { \ if (ipw2100_debug_level & (level)) { \ printk(KERN_DEBUG "ipw2100: %c %s ", \ - in_interrupt() ? 'I' : 'U', __FUNCTION__); \ + in_interrupt() ? 'I' : 'U', __func__); \ printk(message); \ } \ } while (0) diff --git a/drivers/net/wireless/ipw2200.h b/drivers/net/wireless/ipw2200.h index d4ab28b73b3..0bad1ec3e7e 100644 --- a/drivers/net/wireless/ipw2200.h +++ b/drivers/net/wireless/ipw2200.h @@ -1394,13 +1394,13 @@ BIT_ARG16(x) #define IPW_DEBUG(level, fmt, args...) \ do { if (ipw_debug_level & (level)) \ printk(KERN_DEBUG DRV_NAME": %c %s " fmt, \ - in_interrupt() ? 'I' : 'U', __FUNCTION__ , ## args); } while (0) + in_interrupt() ? 'I' : 'U', __func__ , ## args); } while (0) #ifdef CONFIG_IPW2200_DEBUG #define IPW_LL_DEBUG(level, fmt, args...) \ do { if (ipw_debug_level & (level)) \ printk(KERN_DEBUG DRV_NAME": %c %s " fmt, \ - in_interrupt() ? 'I' : 'U', __FUNCTION__ , ## args); } while (0) + in_interrupt() ? 'I' : 'U', __func__ , ## args); } while (0) #else #define IPW_LL_DEBUG(level, fmt, args...) do {} while (0) #endif /* CONFIG_IPW2200_DEBUG */ diff --git a/drivers/net/wireless/iwlwifi/iwl-3945-debug.h b/drivers/net/wireless/iwlwifi/iwl-3945-debug.h index f1d002f7b79..33016fb5e9b 100644 --- a/drivers/net/wireless/iwlwifi/iwl-3945-debug.h +++ b/drivers/net/wireless/iwlwifi/iwl-3945-debug.h @@ -34,12 +34,12 @@ extern u32 iwl3945_debug_level; #define IWL_DEBUG(level, fmt, args...) \ do { if (iwl3945_debug_level & (level)) \ printk(KERN_ERR DRV_NAME": %c %s " fmt, \ - in_interrupt() ? 'I' : 'U', __FUNCTION__ , ## args); } while (0) + in_interrupt() ? 'I' : 'U', __func__ , ## args); } while (0) #define IWL_DEBUG_LIMIT(level, fmt, args...) \ do { if ((iwl3945_debug_level & (level)) && net_ratelimit()) \ printk(KERN_ERR DRV_NAME": %c %s " fmt, \ - in_interrupt() ? 'I' : 'U', __FUNCTION__ , ## args); } while (0) + in_interrupt() ? 'I' : 'U', __func__ , ## args); } while (0) static inline void iwl3945_print_hex_dump(int level, void *p, u32 len) { diff --git a/drivers/net/wireless/iwlwifi/iwl-3945-io.h b/drivers/net/wireless/iwlwifi/iwl-3945-io.h index 0b947511461..b3fe48de3ae 100644 --- a/drivers/net/wireless/iwlwifi/iwl-3945-io.h +++ b/drivers/net/wireless/iwlwifi/iwl-3945-io.h @@ -59,7 +59,7 @@ * */ -#define _iwl3945_write32(priv, ofs, val) writel((val), (priv)->hw_base + (ofs)) +#define _iwl3945_write32(priv, ofs, val) iowrite32((val), (priv)->hw_base + (ofs)) #ifdef CONFIG_IWL3945_DEBUG static inline void __iwl3945_write32(const char *f, u32 l, struct iwl3945_priv *priv, u32 ofs, u32 val) @@ -73,14 +73,14 @@ static inline void __iwl3945_write32(const char *f, u32 l, struct iwl3945_priv * #define iwl3945_write32(priv, ofs, val) _iwl3945_write32(priv, ofs, val) #endif -#define _iwl3945_read32(priv, ofs) readl((priv)->hw_base + (ofs)) +#define _iwl3945_read32(priv, ofs) ioread32((priv)->hw_base + (ofs)) #ifdef CONFIG_IWL3945_DEBUG static inline u32 __iwl3945_read32(char *f, u32 l, struct iwl3945_priv *priv, u32 ofs) { IWL_DEBUG_IO("read_direct32(0x%08X) - %s %d\n", ofs, f, l); return _iwl3945_read32(priv, ofs); } -#define iwl3945_read32(priv, ofs) __iwl3945_read32(__FILE__, __LINE__, priv, ofs) +#define iwl3945_read32(priv, ofs)__iwl3945_read32(__FILE__, __LINE__, priv, ofs) #else #define iwl3945_read32(p, o) _iwl3945_read32(p, o) #endif @@ -153,28 +153,10 @@ static inline void __iwl3945_clear_bit(const char *f, u32 l, static inline int _iwl3945_grab_nic_access(struct iwl3945_priv *priv) { int ret; - u32 gp_ctl; - #ifdef CONFIG_IWL3945_DEBUG if (atomic_read(&priv->restrict_refcnt)) return 0; #endif - if (test_bit(STATUS_RF_KILL_HW, &priv->status) || - test_bit(STATUS_RF_KILL_SW, &priv->status)) { - IWL_WARNING("WARNING: Requesting MAC access during RFKILL " - "wakes up NIC\n"); - - /* 10 msec allows time for NIC to complete its data save */ - gp_ctl = _iwl3945_read32(priv, CSR_GP_CNTRL); - if (gp_ctl & CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY) { - IWL_DEBUG_RF_KILL("Wait for complete power-down, " - "gpctl = 0x%08x\n", gp_ctl); - mdelay(10); - } else - IWL_DEBUG_RF_KILL("power-down complete, " - "gpctl = 0x%08x\n", gp_ctl); - } - /* this bit wakes up the NIC */ _iwl3945_set_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ); ret = _iwl3945_poll_bit(priv, CSR_GP_CNTRL, diff --git a/drivers/net/wireless/iwlwifi/iwl-3945.c b/drivers/net/wireless/iwlwifi/iwl-3945.c index 3f51f363534..1377c8190ec 100644 --- a/drivers/net/wireless/iwlwifi/iwl-3945.c +++ b/drivers/net/wireless/iwlwifi/iwl-3945.c @@ -531,99 +531,6 @@ static int iwl3945_is_network_packet(struct iwl3945_priv *priv, } } -static void iwl3945_add_radiotap(struct iwl3945_priv *priv, - struct sk_buff *skb, - struct iwl3945_rx_frame_hdr *rx_hdr, - struct ieee80211_rx_status *stats) -{ - /* First cache any information we need before we overwrite - * the information provided in the skb from the hardware */ - s8 signal = stats->signal; - s8 noise = 0; - int rate = stats->rate_idx; - u64 tsf = stats->mactime; - __le16 phy_flags_hw = rx_hdr->phy_flags, antenna; - - struct iwl3945_rt_rx_hdr { - struct ieee80211_radiotap_header rt_hdr; - __le64 rt_tsf; /* TSF */ - u8 rt_flags; /* radiotap packet flags */ - u8 rt_rate; /* rate in 500kb/s */ - __le16 rt_channelMHz; /* channel in MHz */ - __le16 rt_chbitmask; /* channel bitfield */ - s8 rt_dbmsignal; /* signal in dBm, kluged to signed */ - s8 rt_dbmnoise; - u8 rt_antenna; /* antenna number */ - } __attribute__ ((packed)) *iwl3945_rt; - - if (skb_headroom(skb) < sizeof(*iwl3945_rt)) { - if (net_ratelimit()) - printk(KERN_ERR "not enough headroom [%d] for " - "radiotap head [%zd]\n", - skb_headroom(skb), sizeof(*iwl3945_rt)); - return; - } - - /* put radiotap header in front of 802.11 header and data */ - iwl3945_rt = (void *)skb_push(skb, sizeof(*iwl3945_rt)); - - /* initialise radiotap header */ - iwl3945_rt->rt_hdr.it_version = PKTHDR_RADIOTAP_VERSION; - iwl3945_rt->rt_hdr.it_pad = 0; - - /* total header + data */ - put_unaligned_le16(sizeof(*iwl3945_rt), &iwl3945_rt->rt_hdr.it_len); - - /* Indicate all the fields we add to the radiotap header */ - put_unaligned_le32((1 << IEEE80211_RADIOTAP_TSFT) | - (1 << IEEE80211_RADIOTAP_FLAGS) | - (1 << IEEE80211_RADIOTAP_RATE) | - (1 << IEEE80211_RADIOTAP_CHANNEL) | - (1 << IEEE80211_RADIOTAP_DBM_ANTSIGNAL) | - (1 << IEEE80211_RADIOTAP_DBM_ANTNOISE) | - (1 << IEEE80211_RADIOTAP_ANTENNA), - &iwl3945_rt->rt_hdr.it_present); - - /* Zero the flags, we'll add to them as we go */ - iwl3945_rt->rt_flags = 0; - - put_unaligned_le64(tsf, &iwl3945_rt->rt_tsf); - - iwl3945_rt->rt_dbmsignal = signal; - iwl3945_rt->rt_dbmnoise = noise; - - /* Convert the channel frequency and set the flags */ - put_unaligned_le16(stats->freq, &iwl3945_rt->rt_channelMHz); - if (!(phy_flags_hw & RX_RES_PHY_FLAGS_BAND_24_MSK)) - put_unaligned_le16(IEEE80211_CHAN_OFDM | IEEE80211_CHAN_5GHZ, - &iwl3945_rt->rt_chbitmask); - else if (phy_flags_hw & RX_RES_PHY_FLAGS_MOD_CCK_MSK) - put_unaligned_le16(IEEE80211_CHAN_CCK | IEEE80211_CHAN_2GHZ, - &iwl3945_rt->rt_chbitmask); - else /* 802.11g */ - put_unaligned_le16(IEEE80211_CHAN_OFDM | IEEE80211_CHAN_2GHZ, - &iwl3945_rt->rt_chbitmask); - - if (rate == -1) - iwl3945_rt->rt_rate = 0; - else { - if (stats->band == IEEE80211_BAND_5GHZ) - rate += IWL_FIRST_OFDM_RATE; - - iwl3945_rt->rt_rate = iwl3945_rates[rate].ieee; - } - - /* antenna number */ - antenna = phy_flags_hw & RX_RES_PHY_FLAGS_ANTENNA_MSK; - iwl3945_rt->rt_antenna = le16_to_cpu(antenna) >> 4; - - /* set the preamble flag if we have it */ - if (phy_flags_hw & RX_RES_PHY_FLAGS_SHORT_PREAMBLE_MSK) - iwl3945_rt->rt_flags |= IEEE80211_RADIOTAP_F_SHORTPRE; - - stats->flag |= RX_FLAG_RADIOTAP; -} - static void iwl3945_pass_packet_to_mac80211(struct iwl3945_priv *priv, struct iwl3945_rx_mem_buffer *rxb, struct ieee80211_rx_status *stats) @@ -657,9 +564,6 @@ static void iwl3945_pass_packet_to_mac80211(struct iwl3945_priv *priv, iwl3945_set_decrypted_flag(priv, rxb->skb, le32_to_cpu(rx_end->status), stats); - if (priv->add_radiotap) - iwl3945_add_radiotap(priv, rxb->skb, rx_hdr, stats); - #ifdef CONFIG_IWL3945_LEDS if (ieee80211_is_data(hdr->frame_control)) priv->rxtxpackets += len; @@ -684,7 +588,6 @@ static void iwl3945_rx_reply_rx(struct iwl3945_priv *priv, u16 rx_stats_noise_diff = le16_to_cpu(rx_stats->noise_diff); u8 network_packet; - rx_status.antenna = 0; rx_status.flag = 0; rx_status.mactime = le64_to_cpu(rx_end->timestamp); rx_status.freq = @@ -696,6 +599,13 @@ static void iwl3945_rx_reply_rx(struct iwl3945_priv *priv, if (rx_status.band == IEEE80211_BAND_5GHZ) rx_status.rate_idx -= IWL_FIRST_OFDM_RATE; + rx_status.antenna = le16_to_cpu(rx_hdr->phy_flags & + RX_RES_PHY_FLAGS_ANTENNA_MSK) >> 4; + + /* set the preamble flag if appropriate */ + if (rx_hdr->phy_flags & RX_RES_PHY_FLAGS_SHORT_PREAMBLE_MSK) + rx_status.flag |= RX_FLAG_SHORTPRE; + if ((unlikely(rx_stats->phy_count > 20))) { IWL_DEBUG_DROP ("dsp size out of range [0,20]: " @@ -778,87 +688,6 @@ static void iwl3945_rx_reply_rx(struct iwl3945_priv *priv, switch (le16_to_cpu(header->frame_control) & IEEE80211_FCTL_FTYPE) { case IEEE80211_FTYPE_MGMT: - switch (le16_to_cpu(header->frame_control) & - IEEE80211_FCTL_STYPE) { - case IEEE80211_STYPE_PROBE_RESP: - case IEEE80211_STYPE_BEACON:{ - /* If this is a beacon or probe response for - * our network then cache the beacon - * timestamp */ - if ((((priv->iw_mode == IEEE80211_IF_TYPE_STA) - && !compare_ether_addr(header->addr2, - priv->bssid)) || - ((priv->iw_mode == IEEE80211_IF_TYPE_IBSS) - && !compare_ether_addr(header->addr3, - priv->bssid)))) { - struct ieee80211_mgmt *mgmt = - (struct ieee80211_mgmt *)header; - __le32 *pos; - pos = (__le32 *)&mgmt->u.beacon. - timestamp; - priv->timestamp0 = le32_to_cpu(pos[0]); - priv->timestamp1 = le32_to_cpu(pos[1]); - priv->beacon_int = le16_to_cpu( - mgmt->u.beacon.beacon_int); - if (priv->call_post_assoc_from_beacon && - (priv->iw_mode == - IEEE80211_IF_TYPE_STA)) - queue_work(priv->workqueue, - &priv->post_associate.work); - - priv->call_post_assoc_from_beacon = 0; - } - - break; - } - - case IEEE80211_STYPE_ACTION: - /* TODO: Parse 802.11h frames for CSA... */ - break; - - /* - * TODO: Use the new callback function from - * mac80211 instead of sniffing these packets. - */ - case IEEE80211_STYPE_ASSOC_RESP: - case IEEE80211_STYPE_REASSOC_RESP:{ - struct ieee80211_mgmt *mgnt = - (struct ieee80211_mgmt *)header; - - /* We have just associated, give some - * time for the 4-way handshake if - * any. Don't start scan too early. */ - priv->next_scan_jiffies = jiffies + - IWL_DELAY_NEXT_SCAN_AFTER_ASSOC; - - priv->assoc_id = (~((1 << 15) | (1 << 14)) & - le16_to_cpu(mgnt->u. - assoc_resp.aid)); - priv->assoc_capability = - le16_to_cpu(mgnt->u.assoc_resp.capab_info); - if (priv->beacon_int) - queue_work(priv->workqueue, - &priv->post_associate.work); - else - priv->call_post_assoc_from_beacon = 1; - break; - } - - case IEEE80211_STYPE_PROBE_REQ:{ - DECLARE_MAC_BUF(mac1); - DECLARE_MAC_BUF(mac2); - DECLARE_MAC_BUF(mac3); - if (priv->iw_mode == IEEE80211_IF_TYPE_IBSS) - IWL_DEBUG_DROP - ("Dropping (non network): %s" - ", %s, %s\n", - print_mac(mac1, header->addr1), - print_mac(mac2, header->addr2), - print_mac(mac3, header->addr3)); - return; - } - } - case IEEE80211_FTYPE_DATA: /* fall through */ default: diff --git a/drivers/net/wireless/iwlwifi/iwl-3945.h b/drivers/net/wireless/iwlwifi/iwl-3945.h index fa81ba1af3d..9bbbc9d7c0e 100644 --- a/drivers/net/wireless/iwlwifi/iwl-3945.h +++ b/drivers/net/wireless/iwlwifi/iwl-3945.h @@ -707,7 +707,6 @@ struct iwl3945_priv { enum ieee80211_band band; int alloc_rxb_skb; - bool add_radiotap; void (*rx_handlers[REPLY_MAX])(struct iwl3945_priv *priv, struct iwl3945_rx_mem_buffer *rxb); @@ -895,7 +894,6 @@ struct iwl3945_priv { struct delayed_work thermal_periodic; struct delayed_work gather_stats; struct delayed_work scan_check; - struct delayed_work post_associate; #define IWL_DEFAULT_TX_POWER 0x0F s8 user_txpower_limit; diff --git a/drivers/net/wireless/iwlwifi/iwl-4965-hw.h b/drivers/net/wireless/iwlwifi/iwl-4965-hw.h index fce950f4163..f4793a60944 100644 --- a/drivers/net/wireless/iwlwifi/iwl-4965-hw.h +++ b/drivers/net/wireless/iwlwifi/iwl-4965-hw.h @@ -98,16 +98,17 @@ #define IWL_RSSI_OFFSET 44 -#include "iwl-commands.h" /* PCI registers */ -#define PCI_LINK_CTRL 0x0F0 /* 1 byte */ -#define PCI_POWER_SOURCE 0x0C8 -#define PCI_REG_WUM8 0x0E8 +#define PCI_CFG_RETRY_TIMEOUT 0x041 +#define PCI_CFG_POWER_SOURCE 0x0C8 +#define PCI_REG_WUM8 0x0E8 +#define PCI_CFG_LINK_CTRL 0x0F0 /* PCI register values */ -#define PCI_LINK_VAL_L0S_EN 0x01 -#define PCI_LINK_VAL_L1_EN 0x02 +#define PCI_CFG_LINK_CTRL_VAL_L0S_EN 0x01 +#define PCI_CFG_LINK_CTRL_VAL_L1_EN 0x02 +#define PCI_CFG_CMD_REG_INT_DIS_MSK 0x04 #define PCI_CFG_PMC_PME_FROM_D3COLD_SUPPORT (0x80000000) #define TFD_QUEUE_SIZE_MAX (256) diff --git a/drivers/net/wireless/iwlwifi/iwl-4965.c b/drivers/net/wireless/iwlwifi/iwl-4965.c index 23fed329896..d9c4fdbf7f7 100644 --- a/drivers/net/wireless/iwlwifi/iwl-4965.c +++ b/drivers/net/wireless/iwlwifi/iwl-4965.c @@ -399,7 +399,7 @@ static void iwl4965_nic_config(struct iwl_priv *priv) unsigned long flags; u32 val; u16 radio_cfg; - u8 val_link; + u16 link; spin_lock_irqsave(&priv->lock, flags); @@ -410,10 +410,10 @@ static void iwl4965_nic_config(struct iwl_priv *priv) val & ~(1 << 11)); } - pci_read_config_byte(priv->pci_dev, PCI_LINK_CTRL, &val_link); + pci_read_config_word(priv->pci_dev, PCI_CFG_LINK_CTRL, &link); /* L1 is enabled by BIOS */ - if ((val_link & PCI_LINK_VAL_L1_EN) == PCI_LINK_VAL_L1_EN) + if ((link & PCI_CFG_LINK_CTRL_VAL_L1_EN) == PCI_CFG_LINK_CTRL_VAL_L1_EN) /* diable L0S disabled L1A enabled */ iwl_set_bit(priv, CSR_GIO_REG, CSR_GIO_REG_VAL_L0S_ENABLED); else diff --git a/drivers/net/wireless/iwlwifi/iwl-5000-hw.h b/drivers/net/wireless/iwlwifi/iwl-5000-hw.h index 17d4f31c593..c479ee211c5 100644 --- a/drivers/net/wireless/iwlwifi/iwl-5000-hw.h +++ b/drivers/net/wireless/iwlwifi/iwl-5000-hw.h @@ -129,6 +129,13 @@ struct iwl5000_shared { __le32 padding2; } __attribute__ ((packed)); +/* calibrations defined for 5000 */ +/* defines the order in which results should be sent to the runtime uCode */ +enum iwl5000_calib { + IWL5000_CALIB_LO, + IWL5000_CALIB_TX_IQ, + IWL5000_CALIB_TX_IQ_PERD, +}; #endif /* __iwl_5000_hw_h__ */ diff --git a/drivers/net/wireless/iwlwifi/iwl-5000.c b/drivers/net/wireless/iwlwifi/iwl-5000.c index b08036a9d89..cccd84c2f8e 100644 --- a/drivers/net/wireless/iwlwifi/iwl-5000.c +++ b/drivers/net/wireless/iwlwifi/iwl-5000.c @@ -209,14 +209,14 @@ static void iwl5000_nic_config(struct iwl_priv *priv) { unsigned long flags; u16 radio_cfg; - u8 val_link; + u16 link; spin_lock_irqsave(&priv->lock, flags); - pci_read_config_byte(priv->pci_dev, PCI_LINK_CTRL, &val_link); + pci_read_config_word(priv->pci_dev, PCI_CFG_LINK_CTRL, &link); /* L1 is enabled by BIOS */ - if ((val_link & PCI_LINK_VAL_L1_EN) == PCI_LINK_VAL_L1_EN) + if ((link & PCI_CFG_LINK_CTRL_VAL_L1_EN) == PCI_CFG_LINK_CTRL_VAL_L1_EN) /* diable L0S disabled L1A enabled */ iwl_set_bit(priv, CSR_GIO_REG, CSR_GIO_REG_VAL_L0S_ENABLED); else @@ -445,48 +445,6 @@ static int iwl5000_send_Xtal_calib(struct iwl_priv *priv) sizeof(cal_cmd), &cal_cmd); } -static int iwl5000_send_calib_results(struct iwl_priv *priv) -{ - int ret = 0; - - struct iwl_host_cmd hcmd = { - .id = REPLY_PHY_CALIBRATION_CMD, - .meta.flags = CMD_SIZE_HUGE, - }; - - if (priv->calib_results.lo_res) { - hcmd.len = priv->calib_results.lo_res_len; - hcmd.data = priv->calib_results.lo_res; - ret = iwl_send_cmd_sync(priv, &hcmd); - - if (ret) - goto err; - } - - if (priv->calib_results.tx_iq_res) { - hcmd.len = priv->calib_results.tx_iq_res_len; - hcmd.data = priv->calib_results.tx_iq_res; - ret = iwl_send_cmd_sync(priv, &hcmd); - - if (ret) - goto err; - } - - if (priv->calib_results.tx_iq_perd_res) { - hcmd.len = priv->calib_results.tx_iq_perd_res_len; - hcmd.data = priv->calib_results.tx_iq_perd_res; - ret = iwl_send_cmd_sync(priv, &hcmd); - - if (ret) - goto err; - } - - return 0; -err: - IWL_ERROR("Error %d\n", ret); - return ret; -} - static int iwl5000_send_calib_cfg(struct iwl_priv *priv) { struct iwl5000_calib_cfg_cmd calib_cfg_cmd; @@ -511,33 +469,30 @@ static void iwl5000_rx_calib_result(struct iwl_priv *priv, struct iwl_rx_packet *pkt = (void *)rxb->skb->data; struct iwl5000_calib_hdr *hdr = (struct iwl5000_calib_hdr *)pkt->u.raw; int len = le32_to_cpu(pkt->len) & FH_RSCSR_FRAME_SIZE_MSK; - - iwl_free_calib_results(priv); + int index; /* reduce the size of the length field itself */ len -= 4; + /* Define the order in which the results will be sent to the runtime + * uCode. iwl_send_calib_results sends them in a row according to their + * index. We sort them here */ switch (hdr->op_code) { case IWL5000_PHY_CALIBRATE_LO_CMD: - priv->calib_results.lo_res = kzalloc(len, GFP_ATOMIC); - priv->calib_results.lo_res_len = len; - memcpy(priv->calib_results.lo_res, pkt->u.raw, len); + index = IWL5000_CALIB_LO; break; case IWL5000_PHY_CALIBRATE_TX_IQ_CMD: - priv->calib_results.tx_iq_res = kzalloc(len, GFP_ATOMIC); - priv->calib_results.tx_iq_res_len = len; - memcpy(priv->calib_results.tx_iq_res, pkt->u.raw, len); + index = IWL5000_CALIB_TX_IQ; break; case IWL5000_PHY_CALIBRATE_TX_IQ_PERD_CMD: - priv->calib_results.tx_iq_perd_res = kzalloc(len, GFP_ATOMIC); - priv->calib_results.tx_iq_perd_res_len = len; - memcpy(priv->calib_results.tx_iq_perd_res, pkt->u.raw, len); + index = IWL5000_CALIB_TX_IQ_PERD; break; default: IWL_ERROR("Unknown calibration notification %d\n", hdr->op_code); return; } + iwl_calib_set(&priv->calib_results[index], pkt->u.raw, len); } static void iwl5000_rx_calib_complete(struct iwl_priv *priv, @@ -832,7 +787,7 @@ static int iwl5000_alive_notify(struct iwl_priv *priv) iwl5000_send_Xtal_calib(priv); if (priv->ucode_type == UCODE_RT) - iwl5000_send_calib_results(priv); + iwl_send_calib_results(priv); return 0; } diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-rs.c b/drivers/net/wireless/iwlwifi/iwl-agn-rs.c index 90a2b6dee7c..98f2c843b99 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn-rs.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn-rs.c @@ -1669,6 +1669,7 @@ static void rs_rate_scale_perform(struct iwl_priv *priv, return; lq_sta = (struct iwl_lq_sta *)sta->rate_ctrl_priv; + lq_sta->supp_rates = sta->supp_rates[lq_sta->band]; tid = rs_tl_add_packet(lq_sta, hdr); @@ -2217,8 +2218,7 @@ static void rs_rate_init(void *priv_rate, void *priv_sta, sta->txrate_idx = i; sta->last_txrate_idx = sta->txrate_idx; - /* WTF is with this bogus comment? A doesn't have cck rates */ - /* For MODE_IEEE80211A, cck rates are at end of rate table */ + /* For MODE_IEEE80211A, skip over cck rates in global rate table */ if (local->hw.conf.channel->band == IEEE80211_BAND_5GHZ) sta->last_txrate_idx += IWL_FIRST_OFDM_RATE; diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c index e01f048a02d..1547122e66f 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn.c @@ -1270,7 +1270,7 @@ int iwl4965_set_pwr_src(struct iwl_priv *priv, enum iwl_pwr_src src) if (src == IWL_PWR_SRC_VAUX) { u32 val; - ret = pci_read_config_dword(priv->pci_dev, PCI_POWER_SOURCE, + ret = pci_read_config_dword(priv->pci_dev, PCI_CFG_POWER_SOURCE, &val); if (val & PCI_CFG_PMC_PME_FROM_D3COLD_SUPPORT) @@ -2486,6 +2486,7 @@ static void iwl4965_post_associate(struct iwl_priv *priv) if (!priv->vif || !priv->is_open) return; + iwl_power_cancel_timeout(priv); iwl_scan_cancel_timeout(priv, 200); conf = ieee80211_get_hw_conf(priv->hw); @@ -2550,10 +2551,6 @@ static void iwl4965_post_associate(struct iwl_priv *priv) break; } - /* Enable Rx differential gain and sensitivity calibrations */ - iwl_chain_noise_reset(priv); - priv->start_calib = 1; - if (priv->iw_mode == IEEE80211_IF_TYPE_IBSS) priv->assoc_station_added = 1; @@ -2561,7 +2558,12 @@ static void iwl4965_post_associate(struct iwl_priv *priv) iwl_activate_qos(priv, 0); spin_unlock_irqrestore(&priv->lock, flags); - iwl_power_update_mode(priv, 0); + iwl_power_enable_management(priv); + + /* Enable Rx differential gain and sensitivity calibrations */ + iwl_chain_noise_reset(priv); + priv->start_calib = 1; + /* we have just associated, don't start scan too early */ priv->next_scan_jiffies = jiffies + IWL_DELAY_NEXT_SCAN; } @@ -2728,12 +2730,6 @@ static int iwl4965_mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb) IWL_DEBUG_MACDUMP("enter\n"); - if (priv->iw_mode == IEEE80211_IF_TYPE_MNTR) { - IWL_DEBUG_MAC80211("leave - monitor\n"); - dev_kfree_skb_any(skb); - return 0; - } - IWL_DEBUG_TX("dev->xmit(%d bytes) at rate 0x%02x\n", skb->len, ieee80211_get_tx_rate(hw, IEEE80211_SKB_CB(skb))->bitrate); @@ -2798,8 +2794,6 @@ static int iwl4965_mac_config(struct ieee80211_hw *hw, struct ieee80211_conf *co mutex_lock(&priv->mutex); IWL_DEBUG_MAC80211("enter to channel %d\n", conf->channel->hw_value); - priv->add_radiotap = !!(conf->flags & IEEE80211_CONF_RADIOTAP); - if (conf->radio_enabled && iwl_radio_kill_sw_enable_radio(priv)) { IWL_DEBUG_MAC80211("leave - RF-KILL - waiting for uCode\n"); goto out; @@ -2851,7 +2845,7 @@ static int iwl4965_mac_config(struct ieee80211_hw *hw, struct ieee80211_conf *co ) priv->staging_rxon.flags = 0; - iwl_set_rxon_channel(priv, conf->channel->band, channel); + iwl_set_rxon_channel(priv, conf->channel); iwl_set_flags_for_band(priv, conf->channel->band); @@ -3189,9 +3183,9 @@ static void iwl4965_bss_info_changed(struct ieee80211_hw *hw, } -static int iwl4965_mac_hw_scan(struct ieee80211_hw *hw, u8 *ssid, size_t len) +static int iwl_mac_hw_scan(struct ieee80211_hw *hw, u8 *ssid, size_t ssid_len) { - int rc = 0; + int ret; unsigned long flags; struct iwl_priv *priv = hw->priv; @@ -3201,41 +3195,40 @@ static int iwl4965_mac_hw_scan(struct ieee80211_hw *hw, u8 *ssid, size_t len) spin_lock_irqsave(&priv->lock, flags); if (!iwl_is_ready_rf(priv)) { - rc = -EIO; + ret = -EIO; IWL_DEBUG_MAC80211("leave - not ready or exit pending\n"); goto out_unlock; } if (priv->iw_mode == IEEE80211_IF_TYPE_AP) { /* APs don't scan */ - rc = -EIO; + ret = -EIO; IWL_ERROR("ERROR: APs don't scan\n"); goto out_unlock; } /* we don't schedule scan within next_scan_jiffies period */ if (priv->next_scan_jiffies && - time_after(priv->next_scan_jiffies, jiffies)) { - rc = -EAGAIN; + time_after(priv->next_scan_jiffies, jiffies)) { + IWL_DEBUG_SCAN("scan rejected: within next scan period\n"); + ret = -EAGAIN; goto out_unlock; } /* if we just finished scan ask for delay */ - if (priv->last_scan_jiffies && time_after(priv->last_scan_jiffies + - IWL_DELAY_NEXT_SCAN, jiffies)) { - rc = -EAGAIN; + if (iwl_is_associated(priv) && priv->last_scan_jiffies && + time_after(priv->last_scan_jiffies + IWL_DELAY_NEXT_SCAN, jiffies)) { + IWL_DEBUG_SCAN("scan rejected: within previous scan period\n"); + ret = -EAGAIN; goto out_unlock; } - if (len) { - IWL_DEBUG_SCAN("direct scan for %s [%d]\n ", - iwl_escape_essid(ssid, len), (int)len); - + if (ssid_len) { priv->one_direct_scan = 1; - priv->direct_ssid_len = (u8) - min((u8) len, (u8) IW_ESSID_MAX_SIZE); + priv->direct_ssid_len = min_t(u8, ssid_len, IW_ESSID_MAX_SIZE); memcpy(priv->direct_ssid, ssid, priv->direct_ssid_len); - } else + } else { priv->one_direct_scan = 0; + } - rc = iwl_scan_initiate(priv); + ret = iwl_scan_initiate(priv); IWL_DEBUG_MAC80211("leave\n"); @@ -3243,7 +3236,7 @@ out_unlock: spin_unlock_irqrestore(&priv->lock, flags); mutex_unlock(&priv->mutex); - return rc; + return ret; } static void iwl4965_mac_update_tkip_key(struct ieee80211_hw *hw, @@ -3546,6 +3539,16 @@ static void iwl4965_mac_reset_tsf(struct ieee80211_hw *hw) /* Per mac80211.h: This is only used in IBSS mode... */ if (priv->iw_mode != IEEE80211_IF_TYPE_IBSS) { + /* switch to CAM during association period. + * the ucode will block any association/authentication + * frome during assiciation period if it can not hear + * the AP because of PM. the timer enable PM back is + * association do not complete + */ + if (priv->hw->conf.channel->flags & (IEEE80211_CHAN_PASSIVE_SCAN | + IEEE80211_CHAN_RADAR)) + iwl_power_disable_management(priv, 3000); + IWL_DEBUG_MAC80211("leave - not in IBSS\n"); mutex_unlock(&priv->mutex); return; @@ -3630,11 +3633,11 @@ static ssize_t store_debug_level(struct device *d, const char *buf, size_t count) { struct iwl_priv *priv = d->driver_data; - char *p = (char *)buf; - u32 val; + unsigned long val; + int ret; - val = simple_strtoul(p, &p, 0); - if (p == buf) + ret = strict_strtoul(buf, 0, &val); + if (ret) printk(KERN_INFO DRV_NAME ": %s is not in hex or decimal form.\n", buf); else @@ -3706,11 +3709,11 @@ static ssize_t store_tx_power(struct device *d, const char *buf, size_t count) { struct iwl_priv *priv = (struct iwl_priv *)d->driver_data; - char *p = (char *)buf; - u32 val; + unsigned long val; + int ret; - val = simple_strtoul(p, &p, 10); - if (p == buf) + ret = strict_strtoul(buf, 10, &val); + if (ret) printk(KERN_INFO DRV_NAME ": %s is not in decimal form.\n", buf); else @@ -3734,7 +3737,12 @@ static ssize_t store_flags(struct device *d, const char *buf, size_t count) { struct iwl_priv *priv = (struct iwl_priv *)d->driver_data; - u32 flags = simple_strtoul(buf, NULL, 0); + unsigned long val; + u32 flags; + int ret = strict_strtoul(buf, 0, &val); + if (ret) + return ret; + flags = (u32)val; mutex_lock(&priv->mutex); if (le32_to_cpu(priv->staging_rxon.flags) != flags) { @@ -3742,8 +3750,7 @@ static ssize_t store_flags(struct device *d, if (iwl_scan_cancel_timeout(priv, 100)) IWL_WARNING("Could not cancel scan.\n"); else { - IWL_DEBUG_INFO("Committing rxon.flags = 0x%04X\n", - flags); + IWL_DEBUG_INFO("Commit rxon.flags = 0x%04X\n", flags); priv->staging_rxon.flags = cpu_to_le32(flags); iwl4965_commit_rxon(priv); } @@ -3769,7 +3776,12 @@ static ssize_t store_filter_flags(struct device *d, const char *buf, size_t count) { struct iwl_priv *priv = (struct iwl_priv *)d->driver_data; - u32 filter_flags = simple_strtoul(buf, NULL, 0); + unsigned long val; + u32 filter_flags; + int ret = strict_strtoul(buf, 0, &val); + if (ret) + return ret; + filter_flags = (u32)val; mutex_lock(&priv->mutex); if (le32_to_cpu(priv->staging_rxon.filter_flags) != filter_flags) { @@ -3870,10 +3882,12 @@ static ssize_t store_retry_rate(struct device *d, const char *buf, size_t count) { struct iwl_priv *priv = dev_get_drvdata(d); + long val; + int ret = strict_strtol(buf, 10, &val); + if (!ret) + return ret; - priv->retry_rate = simple_strtoul(buf, NULL, 0); - if (priv->retry_rate <= 0) - priv->retry_rate = 1; + priv->retry_rate = (val > 0) ? val : 1; return count; } @@ -3894,9 +3908,9 @@ static ssize_t store_power_level(struct device *d, { struct iwl_priv *priv = dev_get_drvdata(d); int ret; - int mode; + unsigned long mode; + - mode = simple_strtoul(buf, NULL, 0); mutex_lock(&priv->mutex); if (!iwl_is_ready(priv)) { @@ -3904,6 +3918,10 @@ static ssize_t store_power_level(struct device *d, goto out; } + ret = strict_strtoul(buf, 10, &mode); + if (ret) + goto out; + ret = iwl_power_set_user_mode(priv, mode); if (ret) { IWL_DEBUG_MAC80211("failed setting power mode.\n"); @@ -4083,6 +4101,7 @@ static void iwl_setup_deferred_work(struct iwl_priv *priv) /* FIXME : remove when resolved PENDING */ INIT_WORK(&priv->scan_completed, iwl_bg_scan_completed); iwl_setup_scan_deferred_work(priv); + iwl_setup_power_deferred_work(priv); if (priv->cfg->ops->lib->setup_deferred_work) priv->cfg->ops->lib->setup_deferred_work(priv); @@ -4102,6 +4121,7 @@ static void iwl_cancel_deferred_work(struct iwl_priv *priv) cancel_delayed_work_sync(&priv->init_alive_start); cancel_delayed_work(&priv->scan_check); + cancel_delayed_work_sync(&priv->set_power_save); cancel_delayed_work(&priv->alive_start); cancel_work_sync(&priv->beacon_update); del_timer_sync(&priv->statistics_periodic); @@ -4150,7 +4170,7 @@ static struct ieee80211_ops iwl4965_hw_ops = { .reset_tsf = iwl4965_mac_reset_tsf, .bss_info_changed = iwl4965_bss_info_changed, .ampdu_action = iwl4965_mac_ampdu_action, - .hw_scan = iwl4965_mac_hw_scan + .hw_scan = iwl_mac_hw_scan }; static int iwl4965_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent) @@ -4225,9 +4245,6 @@ static int iwl4965_pci_probe(struct pci_dev *pdev, const struct pci_device_id *e pci_set_drvdata(pdev, priv); - /* We disable the RETRY_TIMEOUT register (0x41) to keep - * PCI Tx retries from interfering with C3 CPU state */ - pci_write_config_byte(pdev, 0x41, 0x00); /*********************** * 3. Read REV register @@ -4247,6 +4264,10 @@ static int iwl4965_pci_probe(struct pci_dev *pdev, const struct pci_device_id *e ": Detected Intel Wireless WiFi Link %s REV=0x%X\n", priv->cfg->name, priv->hw_rev); + /* We disable the RETRY_TIMEOUT register (0x41) to keep + * PCI Tx retries from interfering with C3 CPU state */ + pci_write_config_byte(pdev, PCI_CFG_RETRY_TIMEOUT, 0x00); + /* amp init */ err = priv->cfg->ops->lib->apm_ops.init(priv); if (err < 0) { diff --git a/drivers/net/wireless/iwlwifi/iwl-calib.c b/drivers/net/wireless/iwlwifi/iwl-calib.c index ef49440bd7f..35fb4a4f737 100644 --- a/drivers/net/wireless/iwlwifi/iwl-calib.c +++ b/drivers/net/wireless/iwlwifi/iwl-calib.c @@ -66,6 +66,66 @@ #include "iwl-core.h" #include "iwl-calib.h" +/***************************************************************************** + * INIT calibrations framework + *****************************************************************************/ + + int iwl_send_calib_results(struct iwl_priv *priv) +{ + int ret = 0; + int i = 0; + + struct iwl_host_cmd hcmd = { + .id = REPLY_PHY_CALIBRATION_CMD, + .meta.flags = CMD_SIZE_HUGE, + }; + + for (i = 0; i < IWL_CALIB_MAX; i++) + if (priv->calib_results[i].buf) { + hcmd.len = priv->calib_results[i].buf_len; + hcmd.data = priv->calib_results[i].buf; + ret = iwl_send_cmd_sync(priv, &hcmd); + if (ret) + goto err; + } + + return 0; +err: + IWL_ERROR("Error %d iteration %d\n", ret, i); + return ret; +} +EXPORT_SYMBOL(iwl_send_calib_results); + +int iwl_calib_set(struct iwl_calib_result *res, const u8 *buf, int len) +{ + if (res->buf_len != len) { + kfree(res->buf); + res->buf = kzalloc(len, GFP_ATOMIC); + } + if (unlikely(res->buf == NULL)) + return -ENOMEM; + + res->buf_len = len; + memcpy(res->buf, buf, len); + return 0; +} +EXPORT_SYMBOL(iwl_calib_set); + +void iwl_calib_free_results(struct iwl_priv *priv) +{ + int i; + + for (i = 0; i < IWL_CALIB_MAX; i++) { + kfree(priv->calib_results[i].buf); + priv->calib_results[i].buf = NULL; + priv->calib_results[i].buf_len = 0; + } +} + +/***************************************************************************** + * RUNTIME calibrations framework + *****************************************************************************/ + /* "false alarms" are signals that our DSP tries to lock onto, * but then determines that they are either noise, or transmissions * from a distant wireless network (also "noise", really) that get diff --git a/drivers/net/wireless/iwlwifi/iwl-commands.h b/drivers/net/wireless/iwlwifi/iwl-commands.h index 28b5b09996e..8d04e966ad4 100644 --- a/drivers/net/wireless/iwlwifi/iwl-commands.h +++ b/drivers/net/wireless/iwlwifi/iwl-commands.h @@ -163,6 +163,13 @@ enum { /* iwl_cmd_header flags value */ #define IWL_CMD_FAILED_MSK 0x40 +#define SEQ_TO_QUEUE(s) (((s) >> 8) & 0x1f) +#define QUEUE_TO_SEQ(q) (((q) & 0x1f) << 8) +#define SEQ_TO_INDEX(s) ((s) & 0xff) +#define INDEX_TO_SEQ(i) ((i) & 0xff) +#define SEQ_HUGE_FRAME __constant_cpu_to_le16(0x4000) +#define SEQ_RX_FRAME __constant_cpu_to_le16(0x8000) + /** * struct iwl_cmd_header * @@ -171,7 +178,7 @@ enum { */ struct iwl_cmd_header { u8 cmd; /* Command ID: REPLY_RXON, etc. */ - u8 flags; /* IWL_CMD_* */ + u8 flags; /* 0:5 reserved, 6 abort, 7 internal */ /* * The driver sets up the sequence number to values of its chosing. * uCode does not use this value, but passes it back to the driver @@ -187,11 +194,12 @@ struct iwl_cmd_header { * * The Linux driver uses the following format: * - * 0:7 index/position within Tx queue - * 8:13 Tx queue selection - * 14:14 driver sets this to indicate command is in the 'huge' - * storage at the end of the command buffers, i.e. scan cmd - * 15:15 uCode sets this in uCode-originated response/notification + * 0:7 tfd index - position within TX queue + * 8:12 TX queue id + * 13 reserved + * 14 huge - driver sets this to indicate command is in the + * 'huge' storage at the end of the command buffers + * 15 unsolicited RX or uCode-originated notification */ __le16 sequence; @@ -2026,8 +2034,8 @@ struct iwl4965_spectrum_notification { * bit 2 - '0' PM have to walk up every DTIM * '1' PM could sleep over DTIM till listen Interval. * PCI power managed - * bit 3 - '0' (PCI_LINK_CTRL & 0x1) - * '1' !(PCI_LINK_CTRL & 0x1) + * bit 3 - '0' (PCI_CFG_LINK_CTRL & 0x1) + * '1' !(PCI_CFG_LINK_CTRL & 0x1) * Force sleep Modes * bit 31/30- '00' use both mac/xtal sleeps * '01' force Mac sleep diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c index 80f2f84defa..a0b86af25c8 100644 --- a/drivers/net/wireless/iwlwifi/iwl-core.c +++ b/drivers/net/wireless/iwlwifi/iwl-core.c @@ -788,7 +788,7 @@ void iwl_set_rxon_chain(struct iwl_priv *priv) EXPORT_SYMBOL(iwl_set_rxon_chain); /** - * iwlcore_set_rxon_channel - Set the phymode and channel values in staging RXON + * iwl_set_rxon_channel - Set the phymode and channel values in staging RXON * @phymode: MODE_IEEE80211A sets to 5.2GHz; all else set to 2.4GHz * @channel: Any channel valid for the requested phymode @@ -797,10 +797,11 @@ EXPORT_SYMBOL(iwl_set_rxon_chain); * NOTE: Does not commit to the hardware; it sets appropriate bit fields * in the staging RXON flag structure based on the phymode */ -int iwl_set_rxon_channel(struct iwl_priv *priv, - enum ieee80211_band band, - u16 channel) +int iwl_set_rxon_channel(struct iwl_priv *priv, struct ieee80211_channel *ch) { + enum ieee80211_band band = ch->band; + u16 channel = ieee80211_frequency_to_channel(ch->center_freq); + if (!iwl_get_channel_info(priv, band, channel)) { IWL_DEBUG_INFO("Could not set channel to %d [%d]\n", channel, band); @@ -834,6 +835,10 @@ int iwl_setup_mac(struct iwl_priv *priv) /* Tell mac80211 our characteristics */ hw->flags = IEEE80211_HW_SIGNAL_DBM | IEEE80211_HW_NOISE_DBM; + hw->wiphy->interface_modes = + BIT(NL80211_IFTYPE_AP) | + BIT(NL80211_IFTYPE_STATION) | + BIT(NL80211_IFTYPE_ADHOC); /* Default value; 4 EDCA QOS priorities */ hw->queues = 4; /* queues to support 11n aggregation */ @@ -891,7 +896,6 @@ int iwl_init_drv(struct iwl_priv *priv) spin_lock_init(&priv->power_data.lock); spin_lock_init(&priv->sta_lock); spin_lock_init(&priv->hcmd_lock); - spin_lock_init(&priv->lq_mngr.lock); INIT_LIST_HEAD(&priv->free_frames); @@ -922,8 +926,6 @@ int iwl_init_drv(struct iwl_priv *priv) priv->qos_data.qos_active = 0; priv->qos_data.qos_cap.val = 0; - iwl_set_rxon_channel(priv, IEEE80211_BAND_2GHZ, 6); - priv->rates_mask = IWL_RATES_MASK; /* If power management is turned on, default to AC mode */ priv->power_mode = IWL_POWER_AC; @@ -950,22 +952,6 @@ err: } EXPORT_SYMBOL(iwl_init_drv); -void iwl_free_calib_results(struct iwl_priv *priv) -{ - kfree(priv->calib_results.lo_res); - priv->calib_results.lo_res = NULL; - priv->calib_results.lo_res_len = 0; - - kfree(priv->calib_results.tx_iq_res); - priv->calib_results.tx_iq_res = NULL; - priv->calib_results.tx_iq_res_len = 0; - - kfree(priv->calib_results.tx_iq_perd_res); - priv->calib_results.tx_iq_perd_res = NULL; - priv->calib_results.tx_iq_perd_res_len = 0; -} -EXPORT_SYMBOL(iwl_free_calib_results); - int iwl_set_tx_power(struct iwl_priv *priv, s8 tx_power, bool force) { int ret = 0; @@ -993,10 +979,9 @@ int iwl_set_tx_power(struct iwl_priv *priv, s8 tx_power, bool force) } EXPORT_SYMBOL(iwl_set_tx_power); - void iwl_uninit_drv(struct iwl_priv *priv) { - iwl_free_calib_results(priv); + iwl_calib_free_results(priv); iwlcore_free_geos(priv); iwl_free_channel_map(priv); kfree(priv->scan); diff --git a/drivers/net/wireless/iwlwifi/iwl-core.h b/drivers/net/wireless/iwlwifi/iwl-core.h index 64f139e9744..b5db050b22d 100644 --- a/drivers/net/wireless/iwlwifi/iwl-core.h +++ b/drivers/net/wireless/iwlwifi/iwl-core.h @@ -186,12 +186,9 @@ struct ieee80211_hw *iwl_alloc_all(struct iwl_cfg *cfg, void iwl_hw_detect(struct iwl_priv *priv); void iwl_clear_stations_table(struct iwl_priv *priv); -void iwl_free_calib_results(struct iwl_priv *priv); void iwl_reset_qos(struct iwl_priv *priv); void iwl_set_rxon_chain(struct iwl_priv *priv); -int iwl_set_rxon_channel(struct iwl_priv *priv, - enum ieee80211_band band, - u16 channel); +int iwl_set_rxon_channel(struct iwl_priv *priv, struct ieee80211_channel *ch); void iwl_set_rxon_ht(struct iwl_priv *priv, struct iwl_ht_info *ht_info); u8 iwl_is_fat_tx_allowed(struct iwl_priv *priv, struct ieee80211_ht_info *sta_ht_inf); @@ -291,6 +288,13 @@ int iwl_scan_initiate(struct iwl_priv *priv); void iwl_setup_rx_scan_handlers(struct iwl_priv *priv); void iwl_setup_scan_deferred_work(struct iwl_priv *priv); +/******************************************************************************* + * Calibrations - implemented in iwl-calib.c + ******************************************************************************/ +int iwl_send_calib_results(struct iwl_priv *priv); +int iwl_calib_set(struct iwl_calib_result *res, const u8 *buf, int len); +void iwl_calib_free_results(struct iwl_priv *priv); + /***************************************************** * S e n d i n g H o s t C o m m a n d s * *****************************************************/ diff --git a/drivers/net/wireless/iwlwifi/iwl-debug.h b/drivers/net/wireless/iwlwifi/iwl-debug.h index d2daa174df2..e548d67f87f 100644 --- a/drivers/net/wireless/iwlwifi/iwl-debug.h +++ b/drivers/net/wireless/iwlwifi/iwl-debug.h @@ -110,11 +110,12 @@ static inline void iwl_dbgfs_unregister(struct iwl_priv *priv) * */ -#define IWL_DL_INFO (1 << 0) -#define IWL_DL_MAC80211 (1 << 1) -#define IWL_DL_HOST_COMMAND (1 << 2) -#define IWL_DL_STATE (1 << 3) +#define IWL_DL_INFO (1 << 0) +#define IWL_DL_MAC80211 (1 << 1) +#define IWL_DL_HCMD (1 << 2) +#define IWL_DL_STATE (1 << 3) #define IWL_DL_MACDUMP (1 << 4) +#define IWL_DL_HCMD_DUMP (1 << 5) #define IWL_DL_RADIO (1 << 7) #define IWL_DL_POWER (1 << 8) #define IWL_DL_TEMP (1 << 9) @@ -162,7 +163,8 @@ static inline void iwl_dbgfs_unregister(struct iwl_priv *priv) #define IWL_DEBUG_ISR(f, a...) IWL_DEBUG(IWL_DL_ISR, f, ## a) #define IWL_DEBUG_LED(f, a...) IWL_DEBUG(IWL_DL_LED, f, ## a) #define IWL_DEBUG_WEP(f, a...) IWL_DEBUG(IWL_DL_WEP, f, ## a) -#define IWL_DEBUG_HC(f, a...) IWL_DEBUG(IWL_DL_HOST_COMMAND, f, ## a) +#define IWL_DEBUG_HC(f, a...) IWL_DEBUG(IWL_DL_HCMD, f, ## a) +#define IWL_DEBUG_HC_DUMP(f, a...) IWL_DEBUG(IWL_DL_HCMD_DUMP, f, ## a) #define IWL_DEBUG_CALIB(f, a...) IWL_DEBUG(IWL_DL_CALIB, f, ## a) #define IWL_DEBUG_FW(f, a...) IWL_DEBUG(IWL_DL_FW, f, ## a) #define IWL_DEBUG_RF_KILL(f, a...) IWL_DEBUG(IWL_DL_RF_KILL, f, ## a) diff --git a/drivers/net/wireless/iwlwifi/iwl-dev.h b/drivers/net/wireless/iwlwifi/iwl-dev.h index cdfb343c7ec..640ceea913c 100644 --- a/drivers/net/wireless/iwlwifi/iwl-dev.h +++ b/drivers/net/wireless/iwlwifi/iwl-dev.h @@ -225,12 +225,6 @@ struct iwl_frame { struct list_head list; }; -#define SEQ_TO_QUEUE(x) ((x >> 8) & 0xbf) -#define QUEUE_TO_SEQ(x) ((x & 0xbf) << 8) -#define SEQ_TO_INDEX(x) ((u8)(x & 0xff)) -#define INDEX_TO_SEQ(x) ((u8)(x & 0xff)) -#define SEQ_HUGE_FRAME (0x4000) -#define SEQ_RX_FRAME __constant_cpu_to_le16(0x8000) #define SEQ_TO_SN(seq) (((seq) & IEEE80211_SCTL_SEQ) >> 4) #define SN_TO_SEQ(ssn) (((ssn) << 4) & IEEE80211_SCTL_SEQ) #define MAX_SN ((IEEE80211_SCTL_SEQ) >> 4) @@ -636,12 +630,6 @@ static inline u8 get_cmd_index(struct iwl_queue *q, u32 index, int is_huge) struct iwl_priv; -/* - * Forward declare iwl-4965.c functions for iwl-base.c - */ -extern void iwl4965_rf_kill_ct_config(struct iwl_priv *priv); -int iwl4965_check_empty_hw_queue(struct iwl_priv *priv, int sta_id, - u8 tid, int txq_id); /* Structures, enum, and defines specific to the 4965 */ @@ -671,18 +659,6 @@ struct iwl_kw { #define TX_POWER_IWL_ILLEGAL_VOLTAGE -10000 -struct iwl4965_lq_mngr { - spinlock_t lock; - s32 max_window_size; - s32 *expected_tpt; - u8 *next_higher_rate; - u8 *next_lower_rate; - unsigned long stamp; - unsigned long stamp_last; - u32 flush_time; - u32 tx_packets; -}; - /* Sensitivity and chain noise calibration */ #define INTERFERENCE_DATA_AVAILABLE __constant_cpu_to_le32(1) #define INITIALIZATION_VALUE 0xFFFF @@ -745,13 +721,10 @@ struct statistics_general_data { u32 beacon_energy_c; }; -struct iwl_calib_results { - void *tx_iq_res; - void *tx_iq_perd_res; - void *lo_res; - u32 tx_iq_res_len; - u32 tx_iq_perd_res_len; - u32 lo_res_len; +/* Opaque calibration results */ +struct iwl_calib_result { + void *buf; + size_t buf_len; }; enum ucode_type { @@ -813,6 +786,7 @@ enum { #define IWL_MAX_NUM_QUEUES 20 /* FIXME: do dynamic allocation */ +#define IWL_CALIB_MAX 3 struct iwl_priv { @@ -828,7 +802,6 @@ struct iwl_priv { enum ieee80211_band band; int alloc_rxb_skb; - bool add_radiotap; void (*rx_handlers[REPLY_MAX])(struct iwl_priv *priv, struct iwl_rx_mem_buffer *rxb); @@ -857,7 +830,7 @@ struct iwl_priv { s32 last_temperature; /* init calibration results */ - struct iwl_calib_results calib_results; + struct iwl_calib_result calib_results[IWL_CALIB_MAX]; /* Scan related variables */ unsigned long last_scan_jiffies; @@ -939,9 +912,6 @@ struct iwl_priv { u8 last_phy_res[100]; /* Rate scaling data */ - struct iwl4965_lq_mngr lq_mngr; - - /* Rate scaling data */ s8 data_retry_limit; u8 retry_rate; @@ -1047,6 +1017,7 @@ struct iwl_priv { struct tasklet_struct irq_tasklet; + struct delayed_work set_power_save; struct delayed_work init_alive_start; struct delayed_work alive_start; struct delayed_work scan_check; diff --git a/drivers/net/wireless/iwlwifi/iwl-hcmd.c b/drivers/net/wireless/iwlwifi/iwl-hcmd.c index 2eb03eea190..8300f3d00a0 100644 --- a/drivers/net/wireless/iwlwifi/iwl-hcmd.c +++ b/drivers/net/wireless/iwlwifi/iwl-hcmd.c @@ -120,8 +120,18 @@ static int iwl_generic_cmd_callback(struct iwl_priv *priv, return 1; } - IWL_DEBUG_HC("back from %s (0x%08X)\n", - get_cmd_string(cmd->hdr.cmd), pkt->hdr.flags); +#ifdef CONFIG_IWLWIFI_DEBUG + switch (cmd->hdr.cmd) { + case REPLY_TX_LINK_QUALITY_CMD: + case SENSITIVITY_CMD: + IWL_DEBUG_HC_DUMP("back from %s (0x%08X)\n", + get_cmd_string(cmd->hdr.cmd), pkt->hdr.flags); + break; + default: + IWL_DEBUG_HC("back from %s (0x%08X)\n", + get_cmd_string(cmd->hdr.cmd), pkt->hdr.flags); + } +#endif /* Let iwl_tx_complete free the response skb */ return 1; diff --git a/drivers/net/wireless/iwlwifi/iwl-io.h b/drivers/net/wireless/iwlwifi/iwl-io.h index 5bc3df432d2..9740fcc1805 100644 --- a/drivers/net/wireless/iwlwifi/iwl-io.h +++ b/drivers/net/wireless/iwlwifi/iwl-io.h @@ -61,7 +61,7 @@ * */ -#define _iwl_write32(priv, ofs, val) writel((val), (priv)->hw_base + (ofs)) +#define _iwl_write32(priv, ofs, val) iowrite32((val), (priv)->hw_base + (ofs)) #ifdef CONFIG_IWLWIFI_DEBUG static inline void __iwl_write32(const char *f, u32 l, struct iwl_priv *priv, u32 ofs, u32 val) @@ -75,7 +75,7 @@ static inline void __iwl_write32(const char *f, u32 l, struct iwl_priv *priv, #define iwl_write32(priv, ofs, val) _iwl_write32(priv, ofs, val) #endif -#define _iwl_read32(priv, ofs) readl((priv)->hw_base + (ofs)) +#define _iwl_read32(priv, ofs) ioread32((priv)->hw_base + (ofs)) #ifdef CONFIG_IWLWIFI_DEBUG static inline u32 __iwl_read32(char *f, u32 l, struct iwl_priv *priv, u32 ofs) { @@ -155,28 +155,10 @@ static inline void __iwl_clear_bit(const char *f, u32 l, static inline int _iwl_grab_nic_access(struct iwl_priv *priv) { int ret; - u32 gp_ctl; - #ifdef CONFIG_IWLWIFI_DEBUG if (atomic_read(&priv->restrict_refcnt)) return 0; #endif - if (test_bit(STATUS_RF_KILL_HW, &priv->status) || - test_bit(STATUS_RF_KILL_SW, &priv->status)) { - IWL_WARNING("WARNING: Requesting MAC access during RFKILL " - "wakes up NIC\n"); - - /* 10 msec allows time for NIC to complete its data save */ - gp_ctl = _iwl_read32(priv, CSR_GP_CNTRL); - if (gp_ctl & CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY) { - IWL_DEBUG_RF_KILL("Wait for complete power-down, " - "gpctl = 0x%08x\n", gp_ctl); - mdelay(10); - } else - IWL_DEBUG_RF_KILL("power-down complete, " - "gpctl = 0x%08x\n", gp_ctl); - } - /* this bit wakes up the NIC */ _iwl_set_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ); ret = _iwl_poll_bit(priv, CSR_GP_CNTRL, diff --git a/drivers/net/wireless/iwlwifi/iwl-power.c b/drivers/net/wireless/iwlwifi/iwl-power.c index a099c9e30e5..16f834d0c48 100644 --- a/drivers/net/wireless/iwlwifi/iwl-power.c +++ b/drivers/net/wireless/iwlwifi/iwl-power.c @@ -152,9 +152,10 @@ static u16 iwl_get_auto_power_mode(struct iwl_priv *priv) /* initialize to default */ static int iwl_power_init_handle(struct iwl_priv *priv) { - int ret = 0, i; struct iwl_power_mgr *pow_data; int size = sizeof(struct iwl_power_vec_entry) * IWL_POWER_MAX; + struct iwl_powertable_cmd *cmd; + int i; u16 pci_pm; IWL_DEBUG_POWER("Initialize power \n"); @@ -167,25 +168,19 @@ static int iwl_power_init_handle(struct iwl_priv *priv) memcpy(&pow_data->pwr_range_1[0], &range_1[0], size); memcpy(&pow_data->pwr_range_2[0], &range_2[0], size); - ret = pci_read_config_word(priv->pci_dev, - PCI_LINK_CTRL, &pci_pm); - if (ret != 0) - return 0; - else { - struct iwl_powertable_cmd *cmd; + pci_read_config_word(priv->pci_dev, PCI_CFG_LINK_CTRL, &pci_pm); - IWL_DEBUG_POWER("adjust power command flags\n"); + IWL_DEBUG_POWER("adjust power command flags\n"); - for (i = 0; i < IWL_POWER_MAX; i++) { - cmd = &pow_data->pwr_range_0[i].cmd; + for (i = 0; i < IWL_POWER_MAX; i++) { + cmd = &pow_data->pwr_range_0[i].cmd; - if (pci_pm & 0x1) - cmd->flags &= ~IWL_POWER_PCI_PM_MSK; - else - cmd->flags |= IWL_POWER_PCI_PM_MSK; - } + if (pci_pm & PCI_CFG_LINK_CTRL_VAL_L0S_EN) + cmd->flags &= ~IWL_POWER_PCI_PM_MSK; + else + cmd->flags |= IWL_POWER_PCI_PM_MSK; } - return ret; + return 0; } /* adjust power command according to dtim period and power level*/ @@ -324,7 +319,7 @@ EXPORT_SYMBOL(iwl_power_update_mode); * this will be usefull for rate scale to disable PM during heavy * Tx/Rx activities */ -int iwl_power_disable_management(struct iwl_priv *priv) +int iwl_power_disable_management(struct iwl_priv *priv, u32 ms) { u16 prev_mode; int ret = 0; @@ -337,6 +332,11 @@ int iwl_power_disable_management(struct iwl_priv *priv) ret = iwl_power_update_mode(priv, 0); priv->power_data.power_disabled = 1; priv->power_data.user_power_setting = prev_mode; + cancel_delayed_work(&priv->set_power_save); + if (ms) + queue_delayed_work(priv->workqueue, &priv->set_power_save, + msecs_to_jiffies(ms)); + return ret; } @@ -431,3 +431,35 @@ int iwl_power_temperature_change(struct iwl_priv *priv) return ret; } EXPORT_SYMBOL(iwl_power_temperature_change); + +static void iwl_bg_set_power_save(struct work_struct *work) +{ + struct iwl_priv *priv = container_of(work, + struct iwl_priv, set_power_save.work); + IWL_DEBUG(IWL_DL_STATE, "update power\n"); + + if (test_bit(STATUS_EXIT_PENDING, &priv->status)) + return; + + mutex_lock(&priv->mutex); + + /* on starting association we disable power managment + * until association, if association failed then this + * timer will expire and enable PM again. + */ + if (!iwl_is_associated(priv)) + iwl_power_enable_management(priv); + + mutex_unlock(&priv->mutex); +} +void iwl_setup_power_deferred_work(struct iwl_priv *priv) +{ + INIT_DELAYED_WORK(&priv->set_power_save, iwl_bg_set_power_save); +} +EXPORT_SYMBOL(iwl_setup_power_deferred_work); + +void iwl_power_cancel_timeout(struct iwl_priv *priv) +{ + cancel_delayed_work(&priv->set_power_save); +} +EXPORT_SYMBOL(iwl_power_cancel_timeout); diff --git a/drivers/net/wireless/iwlwifi/iwl-power.h b/drivers/net/wireless/iwlwifi/iwl-power.h index abcbbf96a84..aa99f3647de 100644 --- a/drivers/net/wireless/iwlwifi/iwl-power.h +++ b/drivers/net/wireless/iwlwifi/iwl-power.h @@ -78,8 +78,10 @@ struct iwl_power_mgr { u8 power_disabled; /* flag to disable using power saving level */ }; +void iwl_setup_power_deferred_work(struct iwl_priv *priv); +void iwl_power_cancel_timeout(struct iwl_priv *priv); int iwl_power_update_mode(struct iwl_priv *priv, u8 refresh); -int iwl_power_disable_management(struct iwl_priv *priv); +int iwl_power_disable_management(struct iwl_priv *priv, u32 ms); int iwl_power_enable_management(struct iwl_priv *priv); int iwl_power_set_user_mode(struct iwl_priv *priv, u16 mode); int iwl_power_set_system_mode(struct iwl_priv *priv, u16 mode); diff --git a/drivers/net/wireless/iwlwifi/iwl-rx.c b/drivers/net/wireless/iwlwifi/iwl-rx.c index e81bfc42a7c..faad4d3f56e 100644 --- a/drivers/net/wireless/iwlwifi/iwl-rx.c +++ b/drivers/net/wireless/iwlwifi/iwl-rx.c @@ -789,107 +789,6 @@ static inline void iwl_dbg_report_frame(struct iwl_priv *priv, } #endif -static void iwl_add_radiotap(struct iwl_priv *priv, - struct sk_buff *skb, - struct iwl_rx_phy_res *rx_start, - struct ieee80211_rx_status *stats, - u32 ampdu_status) -{ - s8 signal = stats->signal; - s8 noise = 0; - int rate = stats->rate_idx; - u64 tsf = stats->mactime; - __le16 antenna; - __le16 phy_flags_hw = rx_start->phy_flags; - struct iwl4965_rt_rx_hdr { - struct ieee80211_radiotap_header rt_hdr; - __le64 rt_tsf; /* TSF */ - u8 rt_flags; /* radiotap packet flags */ - u8 rt_rate; /* rate in 500kb/s */ - __le16 rt_channelMHz; /* channel in MHz */ - __le16 rt_chbitmask; /* channel bitfield */ - s8 rt_dbmsignal; /* signal in dBm, kluged to signed */ - s8 rt_dbmnoise; - u8 rt_antenna; /* antenna number */ - } __attribute__ ((packed)) *iwl4965_rt; - - /* TODO: We won't have enough headroom for HT frames. Fix it later. */ - if (skb_headroom(skb) < sizeof(*iwl4965_rt)) { - if (net_ratelimit()) - printk(KERN_ERR "not enough headroom [%d] for " - "radiotap head [%zd]\n", - skb_headroom(skb), sizeof(*iwl4965_rt)); - return; - } - - /* put radiotap header in front of 802.11 header and data */ - iwl4965_rt = (void *)skb_push(skb, sizeof(*iwl4965_rt)); - - /* initialise radiotap header */ - iwl4965_rt->rt_hdr.it_version = PKTHDR_RADIOTAP_VERSION; - iwl4965_rt->rt_hdr.it_pad = 0; - - /* total header + data */ - put_unaligned_le16(sizeof(*iwl4965_rt), &iwl4965_rt->rt_hdr.it_len); - - /* Indicate all the fields we add to the radiotap header */ - put_unaligned_le32((1 << IEEE80211_RADIOTAP_TSFT) | - (1 << IEEE80211_RADIOTAP_FLAGS) | - (1 << IEEE80211_RADIOTAP_RATE) | - (1 << IEEE80211_RADIOTAP_CHANNEL) | - (1 << IEEE80211_RADIOTAP_DBM_ANTSIGNAL) | - (1 << IEEE80211_RADIOTAP_DBM_ANTNOISE) | - (1 << IEEE80211_RADIOTAP_ANTENNA), - &(iwl4965_rt->rt_hdr.it_present)); - - /* Zero the flags, we'll add to them as we go */ - iwl4965_rt->rt_flags = 0; - - put_unaligned_le64(tsf, &iwl4965_rt->rt_tsf); - - iwl4965_rt->rt_dbmsignal = signal; - iwl4965_rt->rt_dbmnoise = noise; - - /* Convert the channel frequency and set the flags */ - put_unaligned(cpu_to_le16(stats->freq), &iwl4965_rt->rt_channelMHz); - if (!(phy_flags_hw & RX_RES_PHY_FLAGS_BAND_24_MSK)) - put_unaligned_le16(IEEE80211_CHAN_OFDM | IEEE80211_CHAN_5GHZ, - &iwl4965_rt->rt_chbitmask); - else if (phy_flags_hw & RX_RES_PHY_FLAGS_MOD_CCK_MSK) - put_unaligned_le16(IEEE80211_CHAN_CCK | IEEE80211_CHAN_2GHZ, - &iwl4965_rt->rt_chbitmask); - else /* 802.11g */ - put_unaligned_le16(IEEE80211_CHAN_OFDM | IEEE80211_CHAN_2GHZ, - &iwl4965_rt->rt_chbitmask); - - if (rate == -1) - iwl4965_rt->rt_rate = 0; - else - iwl4965_rt->rt_rate = iwl_rates[rate].ieee; - - /* - * "antenna number" - * - * It seems that the antenna field in the phy flags value - * is actually a bitfield. This is undefined by radiotap, - * it wants an actual antenna number but I always get "7" - * for most legacy frames I receive indicating that the - * same frame was received on all three RX chains. - * - * I think this field should be removed in favour of a - * new 802.11n radiotap field "RX chains" that is defined - * as a bitmask. - */ - antenna = phy_flags_hw & RX_RES_PHY_FLAGS_ANTENNA_MSK; - iwl4965_rt->rt_antenna = le16_to_cpu(antenna) >> 4; - - /* set the preamble flag if appropriate */ - if (phy_flags_hw & RX_RES_PHY_FLAGS_SHORT_PREAMBLE_MSK) - iwl4965_rt->rt_flags |= IEEE80211_RADIOTAP_F_SHORTPRE; - - stats->flag |= RX_FLAG_RADIOTAP; -} - static void iwl_update_rx_stats(struct iwl_priv *priv, u16 fc, u16 len) { /* 0 - mgmt, 1 - cnt, 2 - data */ @@ -1074,9 +973,6 @@ static void iwl_pass_packet_to_mac80211(struct iwl_priv *priv, iwl_set_decrypted_flag(priv, hdr, ampdu_status, stats)) return; - if (priv->add_radiotap) - iwl_add_radiotap(priv, rxb->skb, rx_start, stats, ampdu_status); - iwl_update_rx_stats(priv, le16_to_cpu(hdr->frame_control), len); ieee80211_rx_irqsafe(priv->hw, rxb->skb, stats); priv->alloc_rxb_skb--; @@ -1171,7 +1067,6 @@ void iwl_rx_reply_rx(struct iwl_priv *priv, if (rx_status.band == IEEE80211_BAND_5GHZ) rx_status.rate_idx -= IWL_FIRST_OFDM_RATE; - rx_status.antenna = 0; rx_status.flag = 0; /* TSF isn't reliable. In order to allow smooth user experience, @@ -1253,6 +1148,26 @@ void iwl_rx_reply_rx(struct iwl_priv *priv, rx_status.signal, rx_status.noise, rx_status.signal, (unsigned long long)rx_status.mactime); + /* + * "antenna number" + * + * It seems that the antenna field in the phy flags value + * is actually a bitfield. This is undefined by radiotap, + * it wants an actual antenna number but I always get "7" + * for most legacy frames I receive indicating that the + * same frame was received on all three RX chains. + * + * I think this field should be removed in favour of a + * new 802.11n radiotap field "RX chains" that is defined + * as a bitmask. + */ + rx_status.antenna = le16_to_cpu(rx_start->phy_flags & + RX_RES_PHY_FLAGS_ANTENNA_MSK) >> 4; + + /* set the preamble flag if appropriate */ + if (rx_start->phy_flags & RX_RES_PHY_FLAGS_SHORT_PREAMBLE_MSK) + rx_status.flag |= RX_FLAG_SHORTPRE; + /* Take shortcut when only in monitor mode */ if (priv->iw_mode == IEEE80211_IF_TYPE_MNTR) { iwl_pass_packet_to_mac80211(priv, include_phy, diff --git a/drivers/net/wireless/iwlwifi/iwl-sta.c b/drivers/net/wireless/iwlwifi/iwl-sta.c index 6283a3a707f..5b7b05c8773 100644 --- a/drivers/net/wireless/iwlwifi/iwl-sta.c +++ b/drivers/net/wireless/iwlwifi/iwl-sta.c @@ -968,6 +968,11 @@ int iwl_get_sta_id(struct iwl_priv *priv, struct ieee80211_hdr *hdr) iwl_print_hex_dump(priv, IWL_DL_DROP, (u8 *) hdr, sizeof(*hdr)); return priv->hw_params.bcast_sta_id; + /* If we are in monitor mode, use BCAST. This is required for + * packet injection. */ + case IEEE80211_IF_TYPE_MNTR: + return priv->hw_params.bcast_sta_id; + default: IWL_WARNING("Unknown mode of operation: %d\n", priv->iw_mode); return priv->hw_params.bcast_sta_id; diff --git a/drivers/net/wireless/iwlwifi/iwl-tx.c b/drivers/net/wireless/iwlwifi/iwl-tx.c index 78b1a7a4ca4..9d485aadef9 100644 --- a/drivers/net/wireless/iwlwifi/iwl-tx.c +++ b/drivers/net/wireless/iwlwifi/iwl-tx.c @@ -126,7 +126,7 @@ int iwl_hw_txq_attach_buf_to_tfd(struct iwl_priv *priv, void *ptr, u32 num_tbs = IWL_GET_BITS(*tfd, num_tbs); /* Each TFD can point to a maximum 20 Tx buffers */ - if ((num_tbs >= MAX_NUM_OF_TBS) || (num_tbs < 0)) { + if (num_tbs >= MAX_NUM_OF_TBS) { IWL_ERROR("Error can not send more than %d chunks\n", MAX_NUM_OF_TBS); return -EINVAL; @@ -796,11 +796,6 @@ int iwl_tx_skb(struct iwl_priv *priv, struct sk_buff *skb) goto drop_unlock; } - if (!priv->vif) { - IWL_DEBUG_DROP("Dropping - !priv->vif\n"); - goto drop_unlock; - } - if ((ieee80211_get_tx_rate(priv->hw, info)->hw_value & 0xFF) == IWL_INVALID_RATE) { IWL_ERROR("ERROR: No TX rate available.\n"); @@ -822,16 +817,18 @@ int iwl_tx_skb(struct iwl_priv *priv, struct sk_buff *skb) /* drop all data frame if we are not associated */ if (ieee80211_is_data(fc) && - (!iwl_is_associated(priv) || - ((priv->iw_mode == IEEE80211_IF_TYPE_STA) && !priv->assoc_id) || - !priv->assoc_station_added)) { + (priv->iw_mode != IEEE80211_IF_TYPE_MNTR || + !(info->flags & IEEE80211_TX_CTL_INJECTED)) && /* packet injection */ + (!iwl_is_associated(priv) || + ((priv->iw_mode == IEEE80211_IF_TYPE_STA) && !priv->assoc_id) || + !priv->assoc_station_added)) { IWL_DEBUG_DROP("Dropping - !iwl_is_associated\n"); goto drop_unlock; } spin_unlock_irqrestore(&priv->lock, flags); - hdr_len = ieee80211_get_hdrlen(le16_to_cpu(fc)); + hdr_len = ieee80211_hdrlen(fc); /* Find (or create) index into station table for destination station */ sta_id = iwl_get_sta_id(priv, hdr); @@ -849,7 +846,7 @@ int iwl_tx_skb(struct iwl_priv *priv, struct sk_buff *skb) txq_id = swq_id; if (ieee80211_is_data_qos(fc)) { qc = ieee80211_get_qos_ctl(hdr); - tid = qc[0] & 0xf; + tid = qc[0] & IEEE80211_QOS_CTL_TID_MASK; seq_number = priv->stations[sta_id].tid[tid].seq_number; seq_number &= IEEE80211_SCTL_SEQ; hdr->seq_ctrl = hdr->seq_ctrl & @@ -1064,7 +1061,7 @@ int iwl_enqueue_hcmd(struct iwl_priv *priv, struct iwl_host_cmd *cmd) out_cmd->hdr.sequence = cpu_to_le16(QUEUE_TO_SEQ(IWL_CMD_QUEUE_NUM) | INDEX_TO_SEQ(q->write_ptr)); if (out_cmd->meta.flags & CMD_SIZE_HUGE) - out_cmd->hdr.sequence |= cpu_to_le16(SEQ_HUGE_FRAME); + out_cmd->hdr.sequence |= SEQ_HUGE_FRAME; len = (idx == TFD_CMD_SLOTS) ? IWL_MAX_SCAN_SIZE : sizeof(struct iwl_cmd); phys_addr = pci_map_single(priv->pci_dev, out_cmd, len, @@ -1072,12 +1069,26 @@ int iwl_enqueue_hcmd(struct iwl_priv *priv, struct iwl_host_cmd *cmd) phys_addr += offsetof(struct iwl_cmd, hdr); iwl_hw_txq_attach_buf_to_tfd(priv, tfd, phys_addr, fix_size); - IWL_DEBUG_HC("Sending command %s (#%x), seq: 0x%04X, " - "%d bytes at %d[%d]:%d\n", - get_cmd_string(out_cmd->hdr.cmd), - out_cmd->hdr.cmd, le16_to_cpu(out_cmd->hdr.sequence), - fix_size, q->write_ptr, idx, IWL_CMD_QUEUE_NUM); - +#ifdef CONFIG_IWLWIFI_DEBUG + switch (out_cmd->hdr.cmd) { + case REPLY_TX_LINK_QUALITY_CMD: + case SENSITIVITY_CMD: + IWL_DEBUG_HC_DUMP("Sending command %s (#%x), seq: 0x%04X, " + "%d bytes at %d[%d]:%d\n", + get_cmd_string(out_cmd->hdr.cmd), + out_cmd->hdr.cmd, + le16_to_cpu(out_cmd->hdr.sequence), fix_size, + q->write_ptr, idx, IWL_CMD_QUEUE_NUM); + break; + default: + IWL_DEBUG_HC("Sending command %s (#%x), seq: 0x%04X, " + "%d bytes at %d[%d]:%d\n", + get_cmd_string(out_cmd->hdr.cmd), + out_cmd->hdr.cmd, + le16_to_cpu(out_cmd->hdr.sequence), fix_size, + q->write_ptr, idx, IWL_CMD_QUEUE_NUM); + } +#endif txq->need_update = 1; /* Set up entry in queue's byte count circular buffer */ @@ -1185,8 +1196,8 @@ void iwl_tx_cmd_complete(struct iwl_priv *priv, struct iwl_rx_mem_buffer *rxb) u16 sequence = le16_to_cpu(pkt->hdr.sequence); int txq_id = SEQ_TO_QUEUE(sequence); int index = SEQ_TO_INDEX(sequence); - int huge = sequence & SEQ_HUGE_FRAME; int cmd_index; + bool huge = !!(pkt->hdr.sequence & SEQ_HUGE_FRAME); struct iwl_cmd *cmd; /* If a Tx command is being handled and it isn't in the actual diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c index b775d5bab66..cbbe73a1288 100644 --- a/drivers/net/wireless/iwlwifi/iwl3945-base.c +++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c @@ -2574,7 +2574,7 @@ static int iwl3945_tx_skb(struct iwl3945_priv *priv, struct sk_buff *skb) spin_unlock_irqrestore(&priv->lock, flags); - hdr_len = ieee80211_get_hdrlen(le16_to_cpu(fc)); + hdr_len = ieee80211_hdrlen(fc); /* Find (or create) index into station table for destination station */ sta_id = iwl3945_get_sta_id(priv, hdr); @@ -2590,7 +2590,7 @@ static int iwl3945_tx_skb(struct iwl3945_priv *priv, struct sk_buff *skb) if (ieee80211_is_data_qos(fc)) { qc = ieee80211_get_qos_ctl(hdr); - tid = qc[0] & 0xf; + tid = qc[0] & IEEE80211_QOS_CTL_TID_MASK; seq_number = priv->stations[sta_id].tid[tid].seq_number & IEEE80211_SCTL_SEQ; hdr->seq_ctrl = cpu_to_le16(seq_number) | @@ -2709,7 +2709,7 @@ static int iwl3945_tx_skb(struct iwl3945_priv *priv, struct sk_buff *skb) sizeof(out_cmd->cmd.tx)); iwl3945_print_hex_dump(IWL_DL_TX, (u8 *)out_cmd->cmd.tx.hdr, - ieee80211_get_hdrlen(le16_to_cpu(fc))); + ieee80211_hdrlen(fc)); /* Tell device the write index *just past* this latest filled TFD */ q->write_ptr = iwl_queue_inc_wrap(q->write_ptr, q->n_bd); @@ -4782,8 +4782,11 @@ static void iwl3945_free_channel_map(struct iwl3945_priv *priv) /* For active scan, listen ACTIVE_DWELL_TIME (msec) on each channel after * sending probe req. This should be set long enough to hear probe responses * from more than one AP. */ -#define IWL_ACTIVE_DWELL_TIME_24 (20) /* all times in msec */ -#define IWL_ACTIVE_DWELL_TIME_52 (10) +#define IWL_ACTIVE_DWELL_TIME_24 (30) /* all times in msec */ +#define IWL_ACTIVE_DWELL_TIME_52 (20) + +#define IWL_ACTIVE_DWELL_FACTOR_24GHZ (3) +#define IWL_ACTIVE_DWELL_FACTOR_52GHZ (2) /* For faster active scanning, scan will move to the next channel if fewer than * PLCP_QUIET_THRESH packets are heard on this channel within @@ -4792,7 +4795,7 @@ static void iwl3945_free_channel_map(struct iwl3945_priv *priv) * no other traffic). * Disable "quiet" feature by setting PLCP_QUIET_THRESH to 0. */ #define IWL_PLCP_QUIET_THRESH __constant_cpu_to_le16(1) /* packets */ -#define IWL_ACTIVE_QUIET_TIME __constant_cpu_to_le16(5) /* msec */ +#define IWL_ACTIVE_QUIET_TIME __constant_cpu_to_le16(10) /* msec */ /* For passive scan, listen PASSIVE_DWELL_TIME (msec) on each channel. * Must be set longer than active dwell time. @@ -4802,19 +4805,23 @@ static void iwl3945_free_channel_map(struct iwl3945_priv *priv) #define IWL_PASSIVE_DWELL_BASE (100) #define IWL_CHANNEL_TUNE_TIME 5 +#define IWL_SCAN_PROBE_MASK(n) cpu_to_le32((BIT(n) | (BIT(n) - BIT(1)))) + static inline u16 iwl3945_get_active_dwell_time(struct iwl3945_priv *priv, - enum ieee80211_band band) + enum ieee80211_band band, + u8 n_probes) { if (band == IEEE80211_BAND_5GHZ) - return IWL_ACTIVE_DWELL_TIME_52; + return IWL_ACTIVE_DWELL_TIME_52 + + IWL_ACTIVE_DWELL_FACTOR_52GHZ * (n_probes + 1); else - return IWL_ACTIVE_DWELL_TIME_24; + return IWL_ACTIVE_DWELL_TIME_24 + + IWL_ACTIVE_DWELL_FACTOR_24GHZ * (n_probes + 1); } static u16 iwl3945_get_passive_dwell_time(struct iwl3945_priv *priv, enum ieee80211_band band) { - u16 active = iwl3945_get_active_dwell_time(priv, band); u16 passive = (band == IEEE80211_BAND_2GHZ) ? IWL_PASSIVE_DWELL_BASE + IWL_PASSIVE_DWELL_TIME_24 : IWL_PASSIVE_DWELL_BASE + IWL_PASSIVE_DWELL_TIME_52; @@ -4829,15 +4836,12 @@ static u16 iwl3945_get_passive_dwell_time(struct iwl3945_priv *priv, passive = (passive * 98) / 100 - IWL_CHANNEL_TUNE_TIME * 2; } - if (passive <= active) - passive = active + 1; - return passive; } static int iwl3945_get_channels_for_scan(struct iwl3945_priv *priv, enum ieee80211_band band, - u8 is_active, u8 direct_mask, + u8 is_active, u8 n_probes, struct iwl3945_scan_channel *scan_ch) { const struct ieee80211_channel *channels = NULL; @@ -4853,9 +4857,12 @@ static int iwl3945_get_channels_for_scan(struct iwl3945_priv *priv, channels = sband->channels; - active_dwell = iwl3945_get_active_dwell_time(priv, band); + active_dwell = iwl3945_get_active_dwell_time(priv, band, n_probes); passive_dwell = iwl3945_get_passive_dwell_time(priv, band); + if (passive_dwell <= active_dwell) + passive_dwell = active_dwell + 1; + for (i = 0, added = 0; i < sband->n_channels; i++) { if (channels[i].flags & IEEE80211_CHAN_DISABLED) continue; @@ -4875,8 +4882,8 @@ static int iwl3945_get_channels_for_scan(struct iwl3945_priv *priv, else scan_ch->type = 1; /* active */ - if (scan_ch->type & 1) - scan_ch->type |= (direct_mask << 1); + if ((scan_ch->type & 1) && n_probes) + scan_ch->type |= IWL_SCAN_PROBE_MASK(n_probes); scan_ch->active_dwell = cpu_to_le16(active_dwell); scan_ch->passive_dwell = cpu_to_le16(passive_dwell); @@ -6093,7 +6100,7 @@ static void iwl3945_bg_request_scan(struct work_struct *data) int rc = 0; struct iwl3945_scan_cmd *scan; struct ieee80211_conf *conf = NULL; - u8 direct_mask; + u8 n_probes = 2; enum ieee80211_band band; conf = ieee80211_get_hw_conf(priv->hw); @@ -6201,7 +6208,7 @@ static void iwl3945_bg_request_scan(struct work_struct *data) scan->direct_scan[0].len = priv->direct_ssid_len; memcpy(scan->direct_scan[0].ssid, priv->direct_ssid, priv->direct_ssid_len); - direct_mask = 1; + n_probes++; } else if (!iwl3945_is_associated(priv) && priv->essid_len) { IWL_DEBUG_SCAN ("Kicking off one direct scan for '%s' when not associated\n", @@ -6209,11 +6216,9 @@ static void iwl3945_bg_request_scan(struct work_struct *data) scan->direct_scan[0].id = WLAN_EID_SSID; scan->direct_scan[0].len = priv->essid_len; memcpy(scan->direct_scan[0].ssid, priv->essid, priv->essid_len); - direct_mask = 1; - } else { + n_probes++; + } else IWL_DEBUG_SCAN("Kicking off one indirect scan.\n"); - direct_mask = 0; - } /* We don't build a direct scan probe request; the uCode will do * that based on the direct_mask added to each channel entry */ @@ -6246,18 +6251,10 @@ static void iwl3945_bg_request_scan(struct work_struct *data) if (priv->iw_mode == IEEE80211_IF_TYPE_MNTR) scan->filter_flags = RXON_FILTER_PROMISC_MSK; - if (direct_mask) - scan->channel_count = - iwl3945_get_channels_for_scan( - priv, band, 1, /* active */ - direct_mask, - (void *)&scan->data[le16_to_cpu(scan->tx_cmd.len)]); - else - scan->channel_count = - iwl3945_get_channels_for_scan( - priv, band, 0, /* passive */ - direct_mask, - (void *)&scan->data[le16_to_cpu(scan->tx_cmd.len)]); + scan->channel_count = + iwl3945_get_channels_for_scan(priv, band, 1, /* active */ + n_probes, + (void *)&scan->data[le16_to_cpu(scan->tx_cmd.len)]); cmd.len += le16_to_cpu(scan->tx_cmd.len) + scan->channel_count * sizeof(struct iwl3945_scan_channel); @@ -6320,11 +6317,8 @@ static void iwl3945_bg_rx_replenish(struct work_struct *data) #define IWL_DELAY_NEXT_SCAN (HZ*2) -static void iwl3945_bg_post_associate(struct work_struct *data) +static void iwl3945_post_associate(struct iwl3945_priv *priv) { - struct iwl3945_priv *priv = container_of(data, struct iwl3945_priv, - post_associate.work); - int rc = 0; struct ieee80211_conf *conf = NULL; DECLARE_MAC_BUF(mac); @@ -6342,12 +6336,9 @@ static void iwl3945_bg_post_associate(struct work_struct *data) if (test_bit(STATUS_EXIT_PENDING, &priv->status)) return; - mutex_lock(&priv->mutex); - - if (!priv->vif || !priv->is_open) { - mutex_unlock(&priv->mutex); + if (!priv->vif || !priv->is_open) return; - } + iwl3945_scan_cancel_timeout(priv, 200); conf = ieee80211_get_hw_conf(priv->hw); @@ -6419,7 +6410,6 @@ static void iwl3945_bg_post_associate(struct work_struct *data) /* we have just associated, don't start scan too early */ priv->next_scan_jiffies = jiffies + IWL_DELAY_NEXT_SCAN; - mutex_unlock(&priv->mutex); } static void iwl3945_bg_abort_scan(struct work_struct *work) @@ -6567,7 +6557,6 @@ static void iwl3945_mac_stop(struct ieee80211_hw *hw) */ mutex_lock(&priv->mutex); iwl3945_scan_cancel_timeout(priv, 100); - cancel_delayed_work(&priv->post_associate); mutex_unlock(&priv->mutex); } @@ -6650,8 +6639,6 @@ static int iwl3945_mac_config(struct ieee80211_hw *hw, struct ieee80211_conf *co mutex_lock(&priv->mutex); IWL_DEBUG_MAC80211("enter to channel %d\n", conf->channel->hw_value); - priv->add_radiotap = !!(conf->flags & IEEE80211_CONF_RADIOTAP); - if (!iwl3945_is_ready(priv)) { IWL_DEBUG_MAC80211("leave - not ready\n"); ret = -EIO; @@ -6935,7 +6922,6 @@ static void iwl3945_mac_remove_interface(struct ieee80211_hw *hw, if (iwl3945_is_ready_rf(priv)) { iwl3945_scan_cancel_timeout(priv, 100); - cancel_delayed_work(&priv->post_associate); priv->staging_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK; iwl3945_commit_rxon(priv); } @@ -6950,6 +6936,63 @@ static void iwl3945_mac_remove_interface(struct ieee80211_hw *hw, IWL_DEBUG_MAC80211("leave\n"); } +#define IWL_DELAY_NEXT_SCAN_AFTER_ASSOC (HZ*6) + +static void iwl3945_bss_info_changed(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + struct ieee80211_bss_conf *bss_conf, + u32 changes) +{ + struct iwl3945_priv *priv = hw->priv; + + IWL_DEBUG_MAC80211("changes = 0x%X\n", changes); + + if (changes & BSS_CHANGED_ERP_PREAMBLE) { + IWL_DEBUG_MAC80211("ERP_PREAMBLE %d\n", + bss_conf->use_short_preamble); + if (bss_conf->use_short_preamble) + priv->staging_rxon.flags |= RXON_FLG_SHORT_PREAMBLE_MSK; + else + priv->staging_rxon.flags &= ~RXON_FLG_SHORT_PREAMBLE_MSK; + } + + if (changes & BSS_CHANGED_ERP_CTS_PROT) { + IWL_DEBUG_MAC80211("ERP_CTS %d\n", bss_conf->use_cts_prot); + if (bss_conf->use_cts_prot && (priv->band != IEEE80211_BAND_5GHZ)) + priv->staging_rxon.flags |= RXON_FLG_TGG_PROTECT_MSK; + else + priv->staging_rxon.flags &= ~RXON_FLG_TGG_PROTECT_MSK; + } + + if (changes & BSS_CHANGED_ASSOC) { + IWL_DEBUG_MAC80211("ASSOC %d\n", bss_conf->assoc); + /* This should never happen as this function should + * never be called from interrupt context. */ + if (WARN_ON_ONCE(in_interrupt())) + return; + if (bss_conf->assoc) { + priv->assoc_id = bss_conf->aid; + priv->beacon_int = bss_conf->beacon_int; + priv->timestamp0 = bss_conf->timestamp & 0xFFFFFFFF; + priv->timestamp1 = (bss_conf->timestamp >> 32) & + 0xFFFFFFFF; + priv->assoc_capability = bss_conf->assoc_capability; + priv->next_scan_jiffies = jiffies + + IWL_DELAY_NEXT_SCAN_AFTER_ASSOC; + mutex_lock(&priv->mutex); + iwl3945_post_associate(priv); + mutex_unlock(&priv->mutex); + } else { + priv->assoc_id = 0; + IWL_DEBUG_MAC80211("DISASSOC %d\n", bss_conf->assoc); + } + } else if (changes && iwl3945_is_associated(priv) && priv->assoc_id) { + IWL_DEBUG_MAC80211("Associated Changes %d\n", changes); + iwl3945_send_rxon_assoc(priv); + } + +} + static int iwl3945_mac_hw_scan(struct ieee80211_hw *hw, u8 *ssid, size_t len) { int rc = 0; @@ -7182,8 +7225,6 @@ static void iwl3945_mac_reset_tsf(struct ieee80211_hw *hw) iwl3945_reset_qos(priv); - cancel_delayed_work(&priv->post_associate); - spin_lock_irqsave(&priv->lock, flags); priv->assoc_id = 0; priv->assoc_capability = 0; @@ -7268,7 +7309,7 @@ static int iwl3945_mac_beacon_update(struct ieee80211_hw *hw, struct sk_buff *sk iwl3945_reset_qos(priv); - queue_work(priv->workqueue, &priv->post_associate.work); + iwl3945_post_associate(priv); mutex_unlock(&priv->mutex); @@ -7767,7 +7808,6 @@ static void iwl3945_setup_deferred_work(struct iwl3945_priv *priv) INIT_WORK(&priv->rf_kill, iwl3945_bg_rf_kill); INIT_WORK(&priv->beacon_update, iwl3945_bg_beacon_update); INIT_WORK(&priv->set_monitor, iwl3945_bg_set_monitor); - INIT_DELAYED_WORK(&priv->post_associate, iwl3945_bg_post_associate); INIT_DELAYED_WORK(&priv->init_alive_start, iwl3945_bg_init_alive_start); INIT_DELAYED_WORK(&priv->alive_start, iwl3945_bg_alive_start); INIT_DELAYED_WORK(&priv->scan_check, iwl3945_bg_scan_check); @@ -7785,7 +7825,6 @@ static void iwl3945_cancel_deferred_work(struct iwl3945_priv *priv) cancel_delayed_work_sync(&priv->init_alive_start); cancel_delayed_work(&priv->scan_check); cancel_delayed_work(&priv->alive_start); - cancel_delayed_work(&priv->post_associate); cancel_work_sync(&priv->beacon_update); } @@ -7830,6 +7869,7 @@ static struct ieee80211_ops iwl3945_hw_ops = { .conf_tx = iwl3945_mac_conf_tx, .get_tsf = iwl3945_mac_get_tsf, .reset_tsf = iwl3945_mac_reset_tsf, + .bss_info_changed = iwl3945_bss_info_changed, .hw_scan = iwl3945_mac_hw_scan }; @@ -7890,6 +7930,11 @@ static int iwl3945_pci_probe(struct pci_dev *pdev, const struct pci_device_id *e hw->flags = IEEE80211_HW_SIGNAL_DBM | IEEE80211_HW_NOISE_DBM; + hw->wiphy->interface_modes = + BIT(NL80211_IFTYPE_AP) | + BIT(NL80211_IFTYPE_STATION) | + BIT(NL80211_IFTYPE_ADHOC); + /* 4 EDCA QOS priorities */ hw->queues = 4; diff --git a/drivers/net/wireless/libertas/assoc.c b/drivers/net/wireless/libertas/assoc.c index a267d6e65f0..4ddf44b2758 100644 --- a/drivers/net/wireless/libertas/assoc.c +++ b/drivers/net/wireless/libertas/assoc.c @@ -8,6 +8,7 @@ #include "scan.h" #include "cmd.h" +static int lbs_adhoc_post(struct lbs_private *priv, struct cmd_header *resp); static const u8 bssid_any[ETH_ALEN] __attribute__ ((aligned (2))) = { 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF }; @@ -20,12 +21,88 @@ static const u8 bssid_off[ETH_ALEN] __attribute__ ((aligned (2))) = #define CAPINFO_MASK (~(0xda00)) +/** + * @brief This function finds common rates between rates and card rates. + * + * It will fill common rates in rates as output if found. + * + * NOTE: Setting the MSB of the basic rates need to be taken + * care, either before or after calling this function + * + * @param priv A pointer to struct lbs_private structure + * @param rates the buffer which keeps input and output + * @param rates_size the size of rate1 buffer; new size of buffer on return + * + * @return 0 on success, or -1 on error + */ +static int get_common_rates(struct lbs_private *priv, + u8 *rates, + u16 *rates_size) +{ + u8 *card_rates = lbs_bg_rates; + size_t num_card_rates = sizeof(lbs_bg_rates); + int ret = 0, i, j; + u8 tmp[30]; + size_t tmp_size = 0; + + /* For each rate in card_rates that exists in rate1, copy to tmp */ + for (i = 0; card_rates[i] && (i < num_card_rates); i++) { + for (j = 0; rates[j] && (j < *rates_size); j++) { + if (rates[j] == card_rates[i]) + tmp[tmp_size++] = card_rates[i]; + } + } + + lbs_deb_hex(LBS_DEB_JOIN, "AP rates ", rates, *rates_size); + lbs_deb_hex(LBS_DEB_JOIN, "card rates ", card_rates, num_card_rates); + lbs_deb_hex(LBS_DEB_JOIN, "common rates", tmp, tmp_size); + lbs_deb_join("TX data rate 0x%02x\n", priv->cur_rate); + + if (!priv->enablehwauto) { + for (i = 0; i < tmp_size; i++) { + if (tmp[i] == priv->cur_rate) + goto done; + } + lbs_pr_alert("Previously set fixed data rate %#x isn't " + "compatible with the network.\n", priv->cur_rate); + ret = -1; + goto done; + } + ret = 0; + +done: + memset(rates, 0, *rates_size); + *rates_size = min_t(int, tmp_size, *rates_size); + memcpy(rates, tmp, *rates_size); + return ret; +} + + +/** + * @brief Sets the MSB on basic rates as the firmware requires + * + * Scan through an array and set the MSB for basic data rates. + * + * @param rates buffer of data rates + * @param len size of buffer + */ +static void lbs_set_basic_rate_flags(u8 *rates, size_t len) +{ + int i; + + for (i = 0; i < len; i++) { + if (rates[i] == 0x02 || rates[i] == 0x04 || + rates[i] == 0x0b || rates[i] == 0x16) + rates[i] |= 0x80; + } +} + /** * @brief Associate to a specific BSS discovered in a scan * * @param priv A pointer to struct lbs_private structure - * @param pbssdesc Pointer to the BSS descriptor to associate with. + * @param assoc_req The association request describing the BSS to associate with * * @return 0-success, otherwise fail */ @@ -33,29 +110,29 @@ static int lbs_associate(struct lbs_private *priv, struct assoc_request *assoc_req) { int ret; + u8 preamble = RADIO_PREAMBLE_LONG; lbs_deb_enter(LBS_DEB_ASSOC); ret = lbs_prepare_and_send_command(priv, CMD_802_11_AUTHENTICATE, 0, CMD_OPTION_WAITFORRSP, 0, assoc_req->bss.bssid); - if (ret) - goto done; + goto out; - /* set preamble to firmware */ + /* Use short preamble only when both the BSS and firmware support it */ if ((priv->capability & WLAN_CAPABILITY_SHORT_PREAMBLE) && (assoc_req->bss.capability & WLAN_CAPABILITY_SHORT_PREAMBLE)) - priv->preamble = CMD_TYPE_SHORT_PREAMBLE; - else - priv->preamble = CMD_TYPE_LONG_PREAMBLE; + preamble = RADIO_PREAMBLE_SHORT; - lbs_set_radio_control(priv); + ret = lbs_set_radio(priv, preamble, 1); + if (ret) + goto out; ret = lbs_prepare_and_send_command(priv, CMD_802_11_ASSOCIATE, 0, CMD_OPTION_WAITFORRSP, 0, assoc_req); -done: +out: lbs_deb_leave_args(LBS_DEB_ASSOC, "ret %d", ret); return ret; } @@ -64,17 +141,22 @@ done: * @brief Join an adhoc network found in a previous scan * * @param priv A pointer to struct lbs_private structure - * @param pbssdesc Pointer to a BSS descriptor found in a previous scan - * to attempt to join + * @param assoc_req The association request describing the BSS to join * - * @return 0--success, -1--fail + * @return 0 on success, error on failure */ -static int lbs_join_adhoc_network(struct lbs_private *priv, +static int lbs_adhoc_join(struct lbs_private *priv, struct assoc_request *assoc_req) { + struct cmd_ds_802_11_ad_hoc_join cmd; struct bss_descriptor *bss = &assoc_req->bss; + u8 preamble = RADIO_PREAMBLE_LONG; + DECLARE_MAC_BUF(mac); + u16 ratesize = 0; int ret = 0; + lbs_deb_enter(LBS_DEB_ASSOC); + lbs_deb_join("current SSID '%s', ssid length %u\n", escape_essid(priv->curbssparams.ssid, priv->curbssparams.ssid_len), @@ -106,29 +188,106 @@ static int lbs_join_adhoc_network(struct lbs_private *priv, goto out; } - /* Use shortpreamble only when both creator and card supports - short preamble */ - if (!(bss->capability & WLAN_CAPABILITY_SHORT_PREAMBLE) || - !(priv->capability & WLAN_CAPABILITY_SHORT_PREAMBLE)) { - lbs_deb_join("AdhocJoin: Long preamble\n"); - priv->preamble = CMD_TYPE_LONG_PREAMBLE; - } else { + /* Use short preamble only when both the BSS and firmware support it */ + if ((priv->capability & WLAN_CAPABILITY_SHORT_PREAMBLE) && + (bss->capability & WLAN_CAPABILITY_SHORT_PREAMBLE)) { lbs_deb_join("AdhocJoin: Short preamble\n"); - priv->preamble = CMD_TYPE_SHORT_PREAMBLE; + preamble = RADIO_PREAMBLE_SHORT; } - lbs_set_radio_control(priv); + ret = lbs_set_radio(priv, preamble, 1); + if (ret) + goto out; lbs_deb_join("AdhocJoin: channel = %d\n", assoc_req->channel); lbs_deb_join("AdhocJoin: band = %c\n", assoc_req->band); priv->adhoccreate = 0; + priv->curbssparams.channel = bss->channel; - ret = lbs_prepare_and_send_command(priv, CMD_802_11_AD_HOC_JOIN, - 0, CMD_OPTION_WAITFORRSP, - OID_802_11_SSID, assoc_req); + /* Build the join command */ + memset(&cmd, 0, sizeof(cmd)); + cmd.hdr.size = cpu_to_le16(sizeof(cmd)); + + cmd.bss.type = CMD_BSS_TYPE_IBSS; + cmd.bss.beaconperiod = cpu_to_le16(bss->beaconperiod); + + memcpy(&cmd.bss.bssid, &bss->bssid, ETH_ALEN); + memcpy(&cmd.bss.ssid, &bss->ssid, bss->ssid_len); + + memcpy(&cmd.bss.phyparamset, &bss->phyparamset, + sizeof(union ieeetypes_phyparamset)); + + memcpy(&cmd.bss.ssparamset, &bss->ssparamset, + sizeof(union IEEEtypes_ssparamset)); + + cmd.bss.capability = cpu_to_le16(bss->capability & CAPINFO_MASK); + lbs_deb_join("ADHOC_J_CMD: tmpcap=%4X CAPINFO_MASK=%4X\n", + bss->capability, CAPINFO_MASK); + + /* information on BSSID descriptor passed to FW */ + lbs_deb_join("ADHOC_J_CMD: BSSID = %s, SSID = '%s'\n", + print_mac(mac, cmd.bss.bssid), cmd.bss.ssid); + + /* Only v8 and below support setting these */ + if (priv->fwrelease < 0x09000000) { + /* failtimeout */ + cmd.failtimeout = cpu_to_le16(MRVDRV_ASSOCIATION_TIME_OUT); + /* probedelay */ + cmd.probedelay = cpu_to_le16(CMD_SCAN_PROBE_DELAY_TIME); + } + + /* Copy Data rates from the rates recorded in scan response */ + memset(cmd.bss.rates, 0, sizeof(cmd.bss.rates)); + ratesize = min_t(u16, sizeof(cmd.bss.rates), MAX_RATES); + memcpy(cmd.bss.rates, bss->rates, ratesize); + if (get_common_rates(priv, cmd.bss.rates, &ratesize)) { + lbs_deb_join("ADHOC_JOIN: get_common_rates returned error.\n"); + ret = -1; + goto out; + } + + /* Copy the ad-hoc creation rates into Current BSS state structure */ + memset(&priv->curbssparams.rates, 0, sizeof(priv->curbssparams.rates)); + memcpy(&priv->curbssparams.rates, cmd.bss.rates, ratesize); + + /* Set MSB on basic rates as the firmware requires, but _after_ + * copying to current bss rates. + */ + lbs_set_basic_rate_flags(cmd.bss.rates, ratesize); + + cmd.bss.ssparamset.ibssparamset.atimwindow = cpu_to_le16(bss->atimwindow); + + if (assoc_req->secinfo.wep_enabled) { + u16 tmp = le16_to_cpu(cmd.bss.capability); + tmp |= WLAN_CAPABILITY_PRIVACY; + cmd.bss.capability = cpu_to_le16(tmp); + } + + if (priv->psmode == LBS802_11POWERMODEMAX_PSP) { + __le32 local_ps_mode = cpu_to_le32(LBS802_11POWERMODECAM); + + /* wake up first */ + ret = lbs_prepare_and_send_command(priv, CMD_802_11_PS_MODE, + CMD_ACT_SET, 0, 0, + &local_ps_mode); + if (ret) { + ret = -1; + goto out; + } + } + + if (lbs_parse_dnld_countryinfo_11d(priv, bss)) { + ret = -1; + goto out; + } + + ret = lbs_cmd_with_response(priv, CMD_802_11_AD_HOC_JOIN, &cmd); + if (ret == 0) + ret = lbs_adhoc_post(priv, (struct cmd_header *) &cmd); out: + lbs_deb_leave_args(LBS_DEB_ASSOC, "ret %d", ret); return ret; } @@ -136,39 +295,131 @@ out: * @brief Start an Adhoc Network * * @param priv A pointer to struct lbs_private structure - * @param adhocssid The ssid of the Adhoc Network - * @return 0--success, -1--fail + * @param assoc_req The association request describing the BSS to start + * + * @return 0 on success, error on failure */ -static int lbs_start_adhoc_network(struct lbs_private *priv, +static int lbs_adhoc_start(struct lbs_private *priv, struct assoc_request *assoc_req) { + struct cmd_ds_802_11_ad_hoc_start cmd; + u8 preamble = RADIO_PREAMBLE_LONG; + size_t ratesize = 0; + u16 tmpcap = 0; int ret = 0; - priv->adhoccreate = 1; + lbs_deb_enter(LBS_DEB_ASSOC); if (priv->capability & WLAN_CAPABILITY_SHORT_PREAMBLE) { - lbs_deb_join("AdhocStart: Short preamble\n"); - priv->preamble = CMD_TYPE_SHORT_PREAMBLE; - } else { - lbs_deb_join("AdhocStart: Long preamble\n"); - priv->preamble = CMD_TYPE_LONG_PREAMBLE; + lbs_deb_join("ADHOC_START: Will use short preamble\n"); + preamble = RADIO_PREAMBLE_SHORT; } - lbs_set_radio_control(priv); + ret = lbs_set_radio(priv, preamble, 1); + if (ret) + goto out; - lbs_deb_join("AdhocStart: channel = %d\n", assoc_req->channel); - lbs_deb_join("AdhocStart: band = %d\n", assoc_req->band); + /* Build the start command */ + memset(&cmd, 0, sizeof(cmd)); + cmd.hdr.size = cpu_to_le16(sizeof(cmd)); - ret = lbs_prepare_and_send_command(priv, CMD_802_11_AD_HOC_START, - 0, CMD_OPTION_WAITFORRSP, 0, assoc_req); + memcpy(cmd.ssid, assoc_req->ssid, assoc_req->ssid_len); + + lbs_deb_join("ADHOC_START: SSID '%s', ssid length %u\n", + escape_essid(assoc_req->ssid, assoc_req->ssid_len), + assoc_req->ssid_len); + cmd.bsstype = CMD_BSS_TYPE_IBSS; + + if (priv->beacon_period == 0) + priv->beacon_period = MRVDRV_BEACON_INTERVAL; + cmd.beaconperiod = cpu_to_le16(priv->beacon_period); + + WARN_ON(!assoc_req->channel); + + /* set Physical parameter set */ + cmd.phyparamset.dsparamset.elementid = MFIE_TYPE_DS_SET; + cmd.phyparamset.dsparamset.len = 1; + cmd.phyparamset.dsparamset.currentchan = assoc_req->channel; + + /* set IBSS parameter set */ + cmd.ssparamset.ibssparamset.elementid = MFIE_TYPE_IBSS_SET; + cmd.ssparamset.ibssparamset.len = 2; + cmd.ssparamset.ibssparamset.atimwindow = 0; + + /* set capability info */ + tmpcap = WLAN_CAPABILITY_IBSS; + if (assoc_req->secinfo.wep_enabled) { + lbs_deb_join("ADHOC_START: WEP enabled, setting privacy on\n"); + tmpcap |= WLAN_CAPABILITY_PRIVACY; + } else + lbs_deb_join("ADHOC_START: WEP disabled, setting privacy off\n"); + + cmd.capability = cpu_to_le16(tmpcap); + + /* Only v8 and below support setting probe delay */ + if (priv->fwrelease < 0x09000000) + cmd.probedelay = cpu_to_le16(CMD_SCAN_PROBE_DELAY_TIME); + + ratesize = min(sizeof(cmd.rates), sizeof(lbs_bg_rates)); + memcpy(cmd.rates, lbs_bg_rates, ratesize); + + /* Copy the ad-hoc creating rates into Current BSS state structure */ + memset(&priv->curbssparams.rates, 0, sizeof(priv->curbssparams.rates)); + memcpy(&priv->curbssparams.rates, &cmd.rates, ratesize); + + /* Set MSB on basic rates as the firmware requires, but _after_ + * copying to current bss rates. + */ + lbs_set_basic_rate_flags(cmd.rates, ratesize); + + lbs_deb_join("ADHOC_START: rates=%02x %02x %02x %02x\n", + cmd.rates[0], cmd.rates[1], cmd.rates[2], cmd.rates[3]); + + if (lbs_create_dnld_countryinfo_11d(priv)) { + lbs_deb_join("ADHOC_START: dnld_countryinfo_11d failed\n"); + ret = -1; + goto out; + } + + lbs_deb_join("ADHOC_START: Starting Ad-Hoc BSS on channel %d, band %d\n", + assoc_req->channel, assoc_req->band); + + priv->adhoccreate = 1; + priv->mode = IW_MODE_ADHOC; + + ret = lbs_cmd_with_response(priv, CMD_802_11_AD_HOC_START, &cmd); + if (ret == 0) + ret = lbs_adhoc_post(priv, (struct cmd_header *) &cmd); + +out: + lbs_deb_leave_args(LBS_DEB_ASSOC, "ret %d", ret); return ret; } -int lbs_stop_adhoc_network(struct lbs_private *priv) +/** + * @brief Stop and Ad-Hoc network and exit Ad-Hoc mode + * + * @param priv A pointer to struct lbs_private structure + * @return 0 on success, or an error + */ +int lbs_adhoc_stop(struct lbs_private *priv) { - return lbs_prepare_and_send_command(priv, CMD_802_11_AD_HOC_STOP, - 0, CMD_OPTION_WAITFORRSP, 0, NULL); + struct cmd_ds_802_11_ad_hoc_stop cmd; + int ret; + + lbs_deb_enter(LBS_DEB_JOIN); + + memset(&cmd, 0, sizeof (cmd)); + cmd.hdr.size = cpu_to_le16 (sizeof (cmd)); + + ret = lbs_cmd_with_response(priv, CMD_802_11_AD_HOC_STOP, &cmd); + + /* Clean up everything even if there was an error */ + lbs_mac_event_disconnected(priv); + + lbs_deb_leave_args(LBS_DEB_ASSOC, "ret %d", ret); + return ret; } static inline int match_bss_no_security(struct lbs_802_11_security *secinfo, @@ -480,14 +731,14 @@ static int assoc_helper_essid(struct lbs_private *priv, if (bss != NULL) { lbs_deb_assoc("SSID found, will join\n"); memcpy(&assoc_req->bss, bss, sizeof(struct bss_descriptor)); - lbs_join_adhoc_network(priv, assoc_req); + lbs_adhoc_join(priv, assoc_req); } else { /* else send START command */ lbs_deb_assoc("SSID not found, creating adhoc network\n"); memcpy(&assoc_req->bss.ssid, &assoc_req->ssid, IW_ESSID_MAX_SIZE); assoc_req->bss.ssid_len = assoc_req->ssid_len; - lbs_start_adhoc_network(priv, assoc_req); + lbs_adhoc_start(priv, assoc_req); } } @@ -520,7 +771,7 @@ static int assoc_helper_bssid(struct lbs_private *priv, ret = lbs_associate(priv, assoc_req); lbs_deb_assoc("ASSOC: lbs_associate(bssid) returned %d\n", ret); } else if (assoc_req->mode == IW_MODE_ADHOC) { - lbs_join_adhoc_network(priv, assoc_req); + lbs_adhoc_join(priv, assoc_req); } out: @@ -1029,7 +1280,9 @@ void lbs_association_worker(struct work_struct *work) */ if (priv->mode == IW_MODE_INFRA) { if (should_deauth_infrastructure(priv, assoc_req)) { - ret = lbs_send_deauthentication(priv); + ret = lbs_cmd_80211_deauthenticate(priv, + priv->curbssparams.bssid, + WLAN_REASON_DEAUTH_LEAVING); if (ret) { lbs_deb_assoc("Deauthentication due to new " "configuration request failed: %d\n", @@ -1038,7 +1291,7 @@ void lbs_association_worker(struct work_struct *work) } } else if (priv->mode == IW_MODE_ADHOC) { if (should_stop_adhoc(priv, assoc_req)) { - ret = lbs_stop_adhoc_network(priv); + ret = lbs_adhoc_stop(priv); if (ret) { lbs_deb_assoc("Teardown of AdHoc network due to " "new configuration request failed: %d\n", @@ -1214,94 +1467,6 @@ struct assoc_request *lbs_get_association_request(struct lbs_private *priv) /** - * @brief This function finds common rates between rate1 and card rates. - * - * It will fill common rates in rate1 as output if found. - * - * NOTE: Setting the MSB of the basic rates need to be taken - * care, either before or after calling this function - * - * @param priv A pointer to struct lbs_private structure - * @param rate1 the buffer which keeps input and output - * @param rate1_size the size of rate1 buffer; new size of buffer on return - * - * @return 0 or -1 - */ -static int get_common_rates(struct lbs_private *priv, - u8 *rates, - u16 *rates_size) -{ - u8 *card_rates = lbs_bg_rates; - size_t num_card_rates = sizeof(lbs_bg_rates); - int ret = 0, i, j; - u8 tmp[30]; - size_t tmp_size = 0; - - /* For each rate in card_rates that exists in rate1, copy to tmp */ - for (i = 0; card_rates[i] && (i < num_card_rates); i++) { - for (j = 0; rates[j] && (j < *rates_size); j++) { - if (rates[j] == card_rates[i]) - tmp[tmp_size++] = card_rates[i]; - } - } - - lbs_deb_hex(LBS_DEB_JOIN, "AP rates ", rates, *rates_size); - lbs_deb_hex(LBS_DEB_JOIN, "card rates ", card_rates, num_card_rates); - lbs_deb_hex(LBS_DEB_JOIN, "common rates", tmp, tmp_size); - lbs_deb_join("TX data rate 0x%02x\n", priv->cur_rate); - - if (!priv->enablehwauto) { - for (i = 0; i < tmp_size; i++) { - if (tmp[i] == priv->cur_rate) - goto done; - } - lbs_pr_alert("Previously set fixed data rate %#x isn't " - "compatible with the network.\n", priv->cur_rate); - ret = -1; - goto done; - } - ret = 0; - -done: - memset(rates, 0, *rates_size); - *rates_size = min_t(int, tmp_size, *rates_size); - memcpy(rates, tmp, *rates_size); - return ret; -} - - -/** - * @brief Sets the MSB on basic rates as the firmware requires - * - * Scan through an array and set the MSB for basic data rates. - * - * @param rates buffer of data rates - * @param len size of buffer - */ -static void lbs_set_basic_rate_flags(u8 *rates, size_t len) -{ - int i; - - for (i = 0; i < len; i++) { - if (rates[i] == 0x02 || rates[i] == 0x04 || - rates[i] == 0x0b || rates[i] == 0x16) - rates[i] |= 0x80; - } -} - -/** - * @brief Send Deauthentication Request - * - * @param priv A pointer to struct lbs_private structure - * @return 0--success, -1--fail - */ -int lbs_send_deauthentication(struct lbs_private *priv) -{ - return lbs_prepare_and_send_command(priv, CMD_802_11_DEAUTHENTICATE, - 0, CMD_OPTION_WAITFORRSP, 0, NULL); -} - -/** * @brief This function prepares command of authenticate. * * @param priv A pointer to struct lbs_private structure @@ -1353,26 +1518,37 @@ out: return ret; } -int lbs_cmd_80211_deauthenticate(struct lbs_private *priv, - struct cmd_ds_command *cmd) +/** + * @brief Deauthenticate from a specific BSS + * + * @param priv A pointer to struct lbs_private structure + * @param bssid The specific BSS to deauthenticate from + * @param reason The 802.11 sec. 7.3.1.7 Reason Code for deauthenticating + * + * @return 0 on success, error on failure + */ +int lbs_cmd_80211_deauthenticate(struct lbs_private *priv, u8 bssid[ETH_ALEN], + u16 reason) { - struct cmd_ds_802_11_deauthenticate *dauth = &cmd->params.deauth; + struct cmd_ds_802_11_deauthenticate cmd; + int ret; lbs_deb_enter(LBS_DEB_JOIN); - cmd->command = cpu_to_le16(CMD_802_11_DEAUTHENTICATE); - cmd->size = cpu_to_le16(sizeof(struct cmd_ds_802_11_deauthenticate) + - S_DS_GEN); + memset(&cmd, 0, sizeof(cmd)); + cmd.hdr.size = cpu_to_le16(sizeof(cmd)); + memcpy(cmd.macaddr, &bssid[0], ETH_ALEN); + cmd.reasoncode = cpu_to_le16(reason); - /* set AP MAC address */ - memmove(dauth->macaddr, priv->curbssparams.bssid, ETH_ALEN); + ret = lbs_cmd_with_response(priv, CMD_802_11_DEAUTHENTICATE, &cmd); - /* Reason code 3 = Station is leaving */ -#define REASON_CODE_STA_LEAVING 3 - dauth->reasoncode = cpu_to_le16(REASON_CODE_STA_LEAVING); + /* Clean up everything even if there was an error; can't assume that + * we're still authenticated to the AP after trying to deauth. + */ + lbs_mac_event_disconnected(priv); lbs_deb_leave(LBS_DEB_JOIN); - return 0; + return ret; } int lbs_cmd_80211_associate(struct lbs_private *priv, @@ -1489,231 +1665,6 @@ done: return ret; } -int lbs_cmd_80211_ad_hoc_start(struct lbs_private *priv, - struct cmd_ds_command *cmd, void *pdata_buf) -{ - struct cmd_ds_802_11_ad_hoc_start *adhs = &cmd->params.ads; - int ret = 0; - int cmdappendsize = 0; - struct assoc_request *assoc_req = pdata_buf; - u16 tmpcap = 0; - size_t ratesize = 0; - - lbs_deb_enter(LBS_DEB_JOIN); - - if (!priv) { - ret = -1; - goto done; - } - - cmd->command = cpu_to_le16(CMD_802_11_AD_HOC_START); - - /* - * Fill in the parameters for 2 data structures: - * 1. cmd_ds_802_11_ad_hoc_start command - * 2. priv->scantable[i] - * - * Driver will fill up SSID, bsstype,IBSS param, Physical Param, - * probe delay, and cap info. - * - * Firmware will fill up beacon period, DTIM, Basic rates - * and operational rates. - */ - - memset(adhs->ssid, 0, IW_ESSID_MAX_SIZE); - memcpy(adhs->ssid, assoc_req->ssid, assoc_req->ssid_len); - - lbs_deb_join("ADHOC_S_CMD: SSID '%s', ssid length %u\n", - escape_essid(assoc_req->ssid, assoc_req->ssid_len), - assoc_req->ssid_len); - - /* set the BSS type */ - adhs->bsstype = CMD_BSS_TYPE_IBSS; - priv->mode = IW_MODE_ADHOC; - if (priv->beacon_period == 0) - priv->beacon_period = MRVDRV_BEACON_INTERVAL; - adhs->beaconperiod = cpu_to_le16(priv->beacon_period); - - /* set Physical param set */ -#define DS_PARA_IE_ID 3 -#define DS_PARA_IE_LEN 1 - - adhs->phyparamset.dsparamset.elementid = DS_PARA_IE_ID; - adhs->phyparamset.dsparamset.len = DS_PARA_IE_LEN; - - WARN_ON(!assoc_req->channel); - - lbs_deb_join("ADHOC_S_CMD: Creating ADHOC on channel %d\n", - assoc_req->channel); - - adhs->phyparamset.dsparamset.currentchan = assoc_req->channel; - - /* set IBSS param set */ -#define IBSS_PARA_IE_ID 6 -#define IBSS_PARA_IE_LEN 2 - - adhs->ssparamset.ibssparamset.elementid = IBSS_PARA_IE_ID; - adhs->ssparamset.ibssparamset.len = IBSS_PARA_IE_LEN; - adhs->ssparamset.ibssparamset.atimwindow = 0; - - /* set capability info */ - tmpcap = WLAN_CAPABILITY_IBSS; - if (assoc_req->secinfo.wep_enabled) { - lbs_deb_join("ADHOC_S_CMD: WEP enabled, " - "setting privacy on\n"); - tmpcap |= WLAN_CAPABILITY_PRIVACY; - } else { - lbs_deb_join("ADHOC_S_CMD: WEP disabled, " - "setting privacy off\n"); - } - adhs->capability = cpu_to_le16(tmpcap); - - /* probedelay */ - adhs->probedelay = cpu_to_le16(CMD_SCAN_PROBE_DELAY_TIME); - - memset(adhs->rates, 0, sizeof(adhs->rates)); - ratesize = min(sizeof(adhs->rates), sizeof(lbs_bg_rates)); - memcpy(adhs->rates, lbs_bg_rates, ratesize); - - /* Copy the ad-hoc creating rates into Current BSS state structure */ - memset(&priv->curbssparams.rates, 0, sizeof(priv->curbssparams.rates)); - memcpy(&priv->curbssparams.rates, &adhs->rates, ratesize); - - /* Set MSB on basic rates as the firmware requires, but _after_ - * copying to current bss rates. - */ - lbs_set_basic_rate_flags(adhs->rates, ratesize); - - lbs_deb_join("ADHOC_S_CMD: rates=%02x %02x %02x %02x \n", - adhs->rates[0], adhs->rates[1], adhs->rates[2], adhs->rates[3]); - - lbs_deb_join("ADHOC_S_CMD: AD HOC Start command is ready\n"); - - if (lbs_create_dnld_countryinfo_11d(priv)) { - lbs_deb_join("ADHOC_S_CMD: dnld_countryinfo_11d failed\n"); - ret = -1; - goto done; - } - - cmd->size = cpu_to_le16(sizeof(struct cmd_ds_802_11_ad_hoc_start) + - S_DS_GEN + cmdappendsize); - - ret = 0; -done: - lbs_deb_leave_args(LBS_DEB_JOIN, "ret %d", ret); - return ret; -} - -int lbs_cmd_80211_ad_hoc_stop(struct cmd_ds_command *cmd) -{ - cmd->command = cpu_to_le16(CMD_802_11_AD_HOC_STOP); - cmd->size = cpu_to_le16(S_DS_GEN); - - return 0; -} - -int lbs_cmd_80211_ad_hoc_join(struct lbs_private *priv, - struct cmd_ds_command *cmd, void *pdata_buf) -{ - struct cmd_ds_802_11_ad_hoc_join *join_cmd = &cmd->params.adj; - struct assoc_request *assoc_req = pdata_buf; - struct bss_descriptor *bss = &assoc_req->bss; - int cmdappendsize = 0; - int ret = 0; - u16 ratesize = 0; - DECLARE_MAC_BUF(mac); - - lbs_deb_enter(LBS_DEB_JOIN); - - cmd->command = cpu_to_le16(CMD_802_11_AD_HOC_JOIN); - - join_cmd->bss.type = CMD_BSS_TYPE_IBSS; - join_cmd->bss.beaconperiod = cpu_to_le16(bss->beaconperiod); - - memcpy(&join_cmd->bss.bssid, &bss->bssid, ETH_ALEN); - memcpy(&join_cmd->bss.ssid, &bss->ssid, bss->ssid_len); - - memcpy(&join_cmd->bss.phyparamset, &bss->phyparamset, - sizeof(union ieeetypes_phyparamset)); - - memcpy(&join_cmd->bss.ssparamset, &bss->ssparamset, - sizeof(union IEEEtypes_ssparamset)); - - join_cmd->bss.capability = cpu_to_le16(bss->capability & CAPINFO_MASK); - lbs_deb_join("ADHOC_J_CMD: tmpcap=%4X CAPINFO_MASK=%4X\n", - bss->capability, CAPINFO_MASK); - - /* information on BSSID descriptor passed to FW */ - lbs_deb_join( - "ADHOC_J_CMD: BSSID = %s, SSID = '%s'\n", - print_mac(mac, join_cmd->bss.bssid), - join_cmd->bss.ssid); - - /* failtimeout */ - join_cmd->failtimeout = cpu_to_le16(MRVDRV_ASSOCIATION_TIME_OUT); - - /* probedelay */ - join_cmd->probedelay = cpu_to_le16(CMD_SCAN_PROBE_DELAY_TIME); - - priv->curbssparams.channel = bss->channel; - - /* Copy Data rates from the rates recorded in scan response */ - memset(join_cmd->bss.rates, 0, sizeof(join_cmd->bss.rates)); - ratesize = min_t(u16, sizeof(join_cmd->bss.rates), MAX_RATES); - memcpy(join_cmd->bss.rates, bss->rates, ratesize); - if (get_common_rates(priv, join_cmd->bss.rates, &ratesize)) { - lbs_deb_join("ADHOC_J_CMD: get_common_rates returns error.\n"); - ret = -1; - goto done; - } - - /* Copy the ad-hoc creating rates into Current BSS state structure */ - memset(&priv->curbssparams.rates, 0, sizeof(priv->curbssparams.rates)); - memcpy(&priv->curbssparams.rates, join_cmd->bss.rates, ratesize); - - /* Set MSB on basic rates as the firmware requires, but _after_ - * copying to current bss rates. - */ - lbs_set_basic_rate_flags(join_cmd->bss.rates, ratesize); - - join_cmd->bss.ssparamset.ibssparamset.atimwindow = - cpu_to_le16(bss->atimwindow); - - if (assoc_req->secinfo.wep_enabled) { - u16 tmp = le16_to_cpu(join_cmd->bss.capability); - tmp |= WLAN_CAPABILITY_PRIVACY; - join_cmd->bss.capability = cpu_to_le16(tmp); - } - - if (priv->psmode == LBS802_11POWERMODEMAX_PSP) { - /* wake up first */ - __le32 Localpsmode; - - Localpsmode = cpu_to_le32(LBS802_11POWERMODECAM); - ret = lbs_prepare_and_send_command(priv, - CMD_802_11_PS_MODE, - CMD_ACT_SET, - 0, 0, &Localpsmode); - - if (ret) { - ret = -1; - goto done; - } - } - - if (lbs_parse_dnld_countryinfo_11d(priv, bss)) { - ret = -1; - goto done; - } - - cmd->size = cpu_to_le16(sizeof(struct cmd_ds_802_11_ad_hoc_join) + - S_DS_GEN + cmdappendsize); - -done: - lbs_deb_leave_args(LBS_DEB_JOIN, "ret %d", ret); - return ret; -} - int lbs_ret_80211_associate(struct lbs_private *priv, struct cmd_ds_command *resp) { @@ -1815,34 +1766,19 @@ done: return ret; } -int lbs_ret_80211_disassociate(struct lbs_private *priv) -{ - lbs_deb_enter(LBS_DEB_JOIN); - - lbs_mac_event_disconnected(priv); - - lbs_deb_leave(LBS_DEB_JOIN); - return 0; -} - -int lbs_ret_80211_ad_hoc_start(struct lbs_private *priv, - struct cmd_ds_command *resp) +static int lbs_adhoc_post(struct lbs_private *priv, struct cmd_header *resp) { int ret = 0; u16 command = le16_to_cpu(resp->command); u16 result = le16_to_cpu(resp->result); - struct cmd_ds_802_11_ad_hoc_result *padhocresult; + struct cmd_ds_802_11_ad_hoc_result *adhoc_resp; union iwreq_data wrqu; struct bss_descriptor *bss; DECLARE_MAC_BUF(mac); lbs_deb_enter(LBS_DEB_JOIN); - padhocresult = &resp->params.result; - - lbs_deb_join("ADHOC_RESP: size = %d\n", le16_to_cpu(resp->size)); - lbs_deb_join("ADHOC_RESP: command = %x\n", command); - lbs_deb_join("ADHOC_RESP: result = %x\n", result); + adhoc_resp = (struct cmd_ds_802_11_ad_hoc_result *) resp; if (!priv->in_progress_assoc_req) { lbs_deb_join("ADHOC_RESP: no in-progress association " @@ -1856,26 +1792,19 @@ int lbs_ret_80211_ad_hoc_start(struct lbs_private *priv, * Join result code 0 --> SUCCESS */ if (result) { - lbs_deb_join("ADHOC_RESP: failed\n"); + lbs_deb_join("ADHOC_RESP: failed (result 0x%X)\n", result); if (priv->connect_status == LBS_CONNECTED) lbs_mac_event_disconnected(priv); ret = -1; goto done; } - /* - * Now the join cmd should be successful - * If BSSID has changed use SSID to compare instead of BSSID - */ - lbs_deb_join("ADHOC_RESP: associated to '%s'\n", - escape_essid(bss->ssid, bss->ssid_len)); - /* Send a Media Connected event, according to the Spec */ priv->connect_status = LBS_CONNECTED; if (command == CMD_RET(CMD_802_11_AD_HOC_START)) { /* Update the created network descriptor with the new BSSID */ - memcpy(bss->bssid, padhocresult->bssid, ETH_ALEN); + memcpy(bss->bssid, adhoc_resp->bssid, ETH_ALEN); } /* Set the BSSID from the joined/started descriptor */ @@ -1894,22 +1823,13 @@ int lbs_ret_80211_ad_hoc_start(struct lbs_private *priv, wrqu.ap_addr.sa_family = ARPHRD_ETHER; wireless_send_event(priv->dev, SIOCGIWAP, &wrqu, NULL); - lbs_deb_join("ADHOC_RESP: - Joined/Started Ad Hoc\n"); - lbs_deb_join("ADHOC_RESP: channel = %d\n", priv->curbssparams.channel); - lbs_deb_join("ADHOC_RESP: BSSID = %s\n", - print_mac(mac, padhocresult->bssid)); + lbs_deb_join("ADHOC_RESP: Joined/started '%s', BSSID %s, channel %d\n", + escape_essid(bss->ssid, bss->ssid_len), + print_mac(mac, priv->curbssparams.bssid), + priv->curbssparams.channel); done: lbs_deb_leave_args(LBS_DEB_JOIN, "ret %d", ret); return ret; } -int lbs_ret_80211_ad_hoc_stop(struct lbs_private *priv) -{ - lbs_deb_enter(LBS_DEB_JOIN); - - lbs_mac_event_disconnected(priv); - - lbs_deb_leave(LBS_DEB_JOIN); - return 0; -} diff --git a/drivers/net/wireless/libertas/assoc.h b/drivers/net/wireless/libertas/assoc.h index c516fbe518f..8b7336dd02a 100644 --- a/drivers/net/wireless/libertas/assoc.h +++ b/drivers/net/wireless/libertas/assoc.h @@ -12,28 +12,18 @@ struct cmd_ds_command; int lbs_cmd_80211_authenticate(struct lbs_private *priv, struct cmd_ds_command *cmd, void *pdata_buf); -int lbs_cmd_80211_ad_hoc_join(struct lbs_private *priv, - struct cmd_ds_command *cmd, - void *pdata_buf); -int lbs_cmd_80211_ad_hoc_stop(struct cmd_ds_command *cmd); -int lbs_cmd_80211_ad_hoc_start(struct lbs_private *priv, - struct cmd_ds_command *cmd, - void *pdata_buf); + +int lbs_adhoc_stop(struct lbs_private *priv); + int lbs_cmd_80211_deauthenticate(struct lbs_private *priv, - struct cmd_ds_command *cmd); + u8 bssid[ETH_ALEN], u16 reason); int lbs_cmd_80211_associate(struct lbs_private *priv, struct cmd_ds_command *cmd, void *pdata_buf); int lbs_ret_80211_ad_hoc_start(struct lbs_private *priv, struct cmd_ds_command *resp); -int lbs_ret_80211_ad_hoc_stop(struct lbs_private *priv); -int lbs_ret_80211_disassociate(struct lbs_private *priv); int lbs_ret_80211_associate(struct lbs_private *priv, struct cmd_ds_command *resp); -int lbs_stop_adhoc_network(struct lbs_private *priv); - -int lbs_send_deauthentication(struct lbs_private *priv); - #endif /* _LBS_ASSOC_H */ diff --git a/drivers/net/wireless/libertas/cmd.c b/drivers/net/wireless/libertas/cmd.c index 75427e61898..802547e7967 100644 --- a/drivers/net/wireless/libertas/cmd.c +++ b/drivers/net/wireless/libertas/cmd.c @@ -614,47 +614,67 @@ static int lbs_cmd_802_11_snmp_mib(struct lbs_private *priv, return 0; } -static int lbs_cmd_802_11_rf_tx_power(struct cmd_ds_command *cmd, - u16 cmd_action, void *pdata_buf) +/** + * @brief Get the min, max, and current TX power + * + * @param priv A pointer to struct lbs_private structure + * @param curlevel Current power level in dBm + * @param minlevel Minimum supported power level in dBm (optional) + * @param maxlevel Maximum supported power level in dBm (optional) + * + * @return 0 on success, error on failure + */ +int lbs_get_tx_power(struct lbs_private *priv, s16 *curlevel, s16 *minlevel, + s16 *maxlevel) { - - struct cmd_ds_802_11_rf_tx_power *prtp = &cmd->params.txp; + struct cmd_ds_802_11_rf_tx_power cmd; + int ret; lbs_deb_enter(LBS_DEB_CMD); - cmd->size = - cpu_to_le16((sizeof(struct cmd_ds_802_11_rf_tx_power)) + S_DS_GEN); - cmd->command = cpu_to_le16(CMD_802_11_RF_TX_POWER); - prtp->action = cpu_to_le16(cmd_action); + memset(&cmd, 0, sizeof(cmd)); + cmd.hdr.size = cpu_to_le16(sizeof(cmd)); + cmd.action = cpu_to_le16(CMD_ACT_GET); + + ret = lbs_cmd_with_response(priv, CMD_802_11_RF_TX_POWER, &cmd); + if (ret == 0) { + *curlevel = le16_to_cpu(cmd.curlevel); + if (minlevel) + *minlevel = le16_to_cpu(cmd.minlevel); + if (maxlevel) + *maxlevel = le16_to_cpu(cmd.maxlevel); + } - lbs_deb_cmd("RF_TX_POWER_CMD: size:%d cmd:0x%x Act:%d\n", - le16_to_cpu(cmd->size), le16_to_cpu(cmd->command), - le16_to_cpu(prtp->action)); + lbs_deb_leave(LBS_DEB_CMD); + return ret; +} - switch (cmd_action) { - case CMD_ACT_TX_POWER_OPT_GET: - prtp->action = cpu_to_le16(CMD_ACT_GET); - prtp->currentlevel = 0; - break; +/** + * @brief Set the TX power + * + * @param priv A pointer to struct lbs_private structure + * @param dbm The desired power level in dBm + * + * @return 0 on success, error on failure + */ +int lbs_set_tx_power(struct lbs_private *priv, s16 dbm) +{ + struct cmd_ds_802_11_rf_tx_power cmd; + int ret; - case CMD_ACT_TX_POWER_OPT_SET_HIGH: - prtp->action = cpu_to_le16(CMD_ACT_SET); - prtp->currentlevel = cpu_to_le16(CMD_ACT_TX_POWER_INDEX_HIGH); - break; + lbs_deb_enter(LBS_DEB_CMD); - case CMD_ACT_TX_POWER_OPT_SET_MID: - prtp->action = cpu_to_le16(CMD_ACT_SET); - prtp->currentlevel = cpu_to_le16(CMD_ACT_TX_POWER_INDEX_MID); - break; + memset(&cmd, 0, sizeof(cmd)); + cmd.hdr.size = cpu_to_le16(sizeof(cmd)); + cmd.action = cpu_to_le16(CMD_ACT_SET); + cmd.curlevel = cpu_to_le16(dbm); - case CMD_ACT_TX_POWER_OPT_SET_LOW: - prtp->action = cpu_to_le16(CMD_ACT_SET); - prtp->currentlevel = cpu_to_le16(*((u16 *) pdata_buf)); - break; - } + lbs_deb_cmd("SET_RF_TX_POWER: %d dBm\n", dbm); + + ret = lbs_cmd_with_response(priv, CMD_802_11_RF_TX_POWER, &cmd); lbs_deb_leave(LBS_DEB_CMD); - return 0; + return ret; } static int lbs_cmd_802_11_monitor_mode(struct cmd_ds_command *cmd, @@ -1033,9 +1053,9 @@ int lbs_mesh_access(struct lbs_private *priv, uint16_t cmd_action, return ret; } -int lbs_mesh_config_send(struct lbs_private *priv, - struct cmd_ds_mesh_config *cmd, - uint16_t action, uint16_t type) +static int __lbs_mesh_config_send(struct lbs_private *priv, + struct cmd_ds_mesh_config *cmd, + uint16_t action, uint16_t type) { int ret; @@ -1054,6 +1074,19 @@ int lbs_mesh_config_send(struct lbs_private *priv, return ret; } +int lbs_mesh_config_send(struct lbs_private *priv, + struct cmd_ds_mesh_config *cmd, + uint16_t action, uint16_t type) +{ + int ret; + + if (!(priv->fwcapinfo & FW_CAPINFO_PERSISTENT_CONFIG)) + return -EOPNOTSUPP; + + ret = __lbs_mesh_config_send(priv, cmd, action, type); + return ret; +} + /* This function is the CMD_MESH_CONFIG legacy function. It only handles the * START and STOP actions. The extended actions supported by CMD_MESH_CONFIG * are all handled by preparing a struct cmd_ds_mesh_config and passing it to @@ -1095,7 +1128,7 @@ int lbs_mesh_config(struct lbs_private *priv, uint16_t action, uint16_t chan) action, priv->mesh_tlv, chan, escape_essid(priv->mesh_ssid, priv->mesh_ssid_len)); - return lbs_mesh_config_send(priv, &cmd, action, priv->mesh_tlv); + return __lbs_mesh_config_send(priv, &cmd, action, priv->mesh_tlv); } static int lbs_cmd_bcn_ctrl(struct lbs_private * priv, @@ -1256,41 +1289,47 @@ void lbs_complete_command(struct lbs_private *priv, struct cmd_ctrl_node *cmd, priv->cur_cmd = NULL; } -int lbs_set_radio_control(struct lbs_private *priv) +int lbs_set_radio(struct lbs_private *priv, u8 preamble, u8 radio_on) { - int ret = 0; struct cmd_ds_802_11_radio_control cmd; + int ret = -EINVAL; lbs_deb_enter(LBS_DEB_CMD); cmd.hdr.size = cpu_to_le16(sizeof(cmd)); cmd.action = cpu_to_le16(CMD_ACT_SET); - switch (priv->preamble) { - case CMD_TYPE_SHORT_PREAMBLE: - cmd.control = cpu_to_le16(SET_SHORT_PREAMBLE); - break; - - case CMD_TYPE_LONG_PREAMBLE: - cmd.control = cpu_to_le16(SET_LONG_PREAMBLE); - break; + /* Only v8 and below support setting the preamble */ + if (priv->fwrelease < 0x09000000) { + switch (preamble) { + case RADIO_PREAMBLE_SHORT: + if (!(priv->capability & WLAN_CAPABILITY_SHORT_PREAMBLE)) + goto out; + /* Fall through */ + case RADIO_PREAMBLE_AUTO: + case RADIO_PREAMBLE_LONG: + cmd.control = cpu_to_le16(preamble); + break; + default: + goto out; + } + } - case CMD_TYPE_AUTO_PREAMBLE: - default: - cmd.control = cpu_to_le16(SET_AUTO_PREAMBLE); - break; + if (radio_on) + cmd.control |= cpu_to_le16(0x1); + else { + cmd.control &= cpu_to_le16(~0x1); + priv->txpower_cur = 0; } - if (priv->radioon) - cmd.control |= cpu_to_le16(TURN_ON_RF); - else - cmd.control &= cpu_to_le16(~TURN_ON_RF); + lbs_deb_cmd("RADIO_CONTROL: radio %s, preamble %d\n", + radio_on ? "ON" : "OFF", preamble); - lbs_deb_cmd("RADIO_SET: radio %d, preamble %d\n", priv->radioon, - priv->preamble); + priv->radio_on = radio_on; ret = lbs_cmd_with_response(priv, CMD_802_11_RADIO_CONTROL, &cmd); +out: lbs_deb_leave_args(LBS_DEB_CMD, "ret %d", ret); return ret; } @@ -1380,14 +1419,6 @@ int lbs_prepare_and_send_command(struct lbs_private *priv, ret = lbs_cmd_80211_associate(priv, cmdptr, pdata_buf); break; - case CMD_802_11_DEAUTHENTICATE: - ret = lbs_cmd_80211_deauthenticate(priv, cmdptr); - break; - - case CMD_802_11_AD_HOC_START: - ret = lbs_cmd_80211_ad_hoc_start(priv, cmdptr, pdata_buf); - break; - case CMD_802_11_RESET: ret = lbs_cmd_802_11_reset(cmdptr, cmd_action); break; @@ -1407,28 +1438,15 @@ int lbs_prepare_and_send_command(struct lbs_private *priv, ret = lbs_cmd_reg_access(cmdptr, cmd_action, pdata_buf); break; - case CMD_802_11_RF_TX_POWER: - ret = lbs_cmd_802_11_rf_tx_power(cmdptr, - cmd_action, pdata_buf); - break; - case CMD_802_11_MONITOR_MODE: ret = lbs_cmd_802_11_monitor_mode(cmdptr, cmd_action, pdata_buf); break; - case CMD_802_11_AD_HOC_JOIN: - ret = lbs_cmd_80211_ad_hoc_join(priv, cmdptr, pdata_buf); - break; - case CMD_802_11_RSSI: ret = lbs_cmd_802_11_rssi(priv, cmdptr); break; - case CMD_802_11_AD_HOC_STOP: - ret = lbs_cmd_80211_ad_hoc_stop(cmdptr); - break; - case CMD_802_11_SET_AFC: case CMD_802_11_GET_AFC: diff --git a/drivers/net/wireless/libertas/cmd.h b/drivers/net/wireless/libertas/cmd.h index a53b51f8bdb..11ac996e895 100644 --- a/drivers/net/wireless/libertas/cmd.h +++ b/drivers/net/wireless/libertas/cmd.h @@ -61,4 +61,10 @@ int lbs_cmd_802_11_enable_rsn(struct lbs_private *priv, uint16_t cmd_action, int lbs_cmd_802_11_key_material(struct lbs_private *priv, uint16_t cmd_action, struct assoc_request *assoc); +int lbs_get_tx_power(struct lbs_private *priv, s16 *curlevel, s16 *minlevel, + s16 *maxlevel); +int lbs_set_tx_power(struct lbs_private *priv, s16 dbm); + +int lbs_set_radio(struct lbs_private *priv, u8 preamble, u8 radio_on); + #endif /* _LBS_CMD_H */ diff --git a/drivers/net/wireless/libertas/cmdresp.c b/drivers/net/wireless/libertas/cmdresp.c index 24de3c3cf87..0371c83f566 100644 --- a/drivers/net/wireless/libertas/cmdresp.c +++ b/drivers/net/wireless/libertas/cmdresp.c @@ -188,21 +188,6 @@ static int lbs_ret_802_11_snmp_mib(struct lbs_private *priv, return 0; } -static int lbs_ret_802_11_rf_tx_power(struct lbs_private *priv, - struct cmd_ds_command *resp) -{ - struct cmd_ds_802_11_rf_tx_power *rtp = &resp->params.txp; - - lbs_deb_enter(LBS_DEB_CMD); - - priv->txpowerlevel = le16_to_cpu(rtp->currentlevel); - - lbs_deb_cmd("TX power currently %d\n", priv->txpowerlevel); - - lbs_deb_leave(LBS_DEB_CMD); - return 0; -} - static int lbs_ret_802_11_rssi(struct lbs_private *priv, struct cmd_ds_command *resp) { @@ -273,24 +258,10 @@ static inline int handle_cmd_response(struct lbs_private *priv, ret = lbs_ret_80211_associate(priv, resp); break; - case CMD_RET(CMD_802_11_DISASSOCIATE): - case CMD_RET(CMD_802_11_DEAUTHENTICATE): - ret = lbs_ret_80211_disassociate(priv); - break; - - case CMD_RET(CMD_802_11_AD_HOC_START): - case CMD_RET(CMD_802_11_AD_HOC_JOIN): - ret = lbs_ret_80211_ad_hoc_start(priv, resp); - break; - case CMD_RET(CMD_802_11_SNMP_MIB): ret = lbs_ret_802_11_snmp_mib(priv, resp); break; - case CMD_RET(CMD_802_11_RF_TX_POWER): - ret = lbs_ret_802_11_rf_tx_power(priv, resp); - break; - case CMD_RET(CMD_802_11_SET_AFC): case CMD_RET(CMD_802_11_GET_AFC): spin_lock_irqsave(&priv->driver_lock, flags); @@ -309,10 +280,6 @@ static inline int handle_cmd_response(struct lbs_private *priv, ret = lbs_ret_802_11_rssi(priv, resp); break; - case CMD_RET(CMD_802_11_AD_HOC_STOP): - ret = lbs_ret_80211_ad_hoc_stop(priv); - break; - case CMD_RET(CMD_802_11D_DOMAIN_INFO): ret = lbs_ret_802_11d_domain_info(resp); break; diff --git a/drivers/net/wireless/libertas/decl.h b/drivers/net/wireless/libertas/decl.h index a8ac974daca..1a8888ccead 100644 --- a/drivers/net/wireless/libertas/decl.h +++ b/drivers/net/wireless/libertas/decl.h @@ -34,7 +34,6 @@ int lbs_process_event(struct lbs_private *priv, u32 event); void lbs_queue_event(struct lbs_private *priv, u32 event); void lbs_notify_command_response(struct lbs_private *priv, u8 resp_idx); -int lbs_set_radio_control(struct lbs_private *priv); u32 lbs_fw_index_to_data_rate(u8 index); u8 lbs_data_rate_to_fw_index(u32 rate); diff --git a/drivers/net/wireless/libertas/defs.h b/drivers/net/wireless/libertas/defs.h index 12e687550bc..4b2428ac222 100644 --- a/drivers/net/wireless/libertas/defs.h +++ b/drivers/net/wireless/libertas/defs.h @@ -243,6 +243,9 @@ static inline void lbs_deb_hex(unsigned int grp, const char *prompt, u8 *buf, in #define CMD_F_HOSTCMD (1 << 0) #define FW_CAPINFO_WPA (1 << 0) +#define FW_CAPINFO_FIRMWARE_UPGRADE (1 << 13) +#define FW_CAPINFO_BOOT2_UPGRADE (1<<14) +#define FW_CAPINFO_PERSISTENT_CONFIG (1<<15) #define KEY_LEN_WPA_AES 16 #define KEY_LEN_WPA_TKIP 32 @@ -316,7 +319,8 @@ enum PS_STATE { enum DNLD_STATE { DNLD_RES_RECEIVED, DNLD_DATA_SENT, - DNLD_CMD_SENT + DNLD_CMD_SENT, + DNLD_BOOTCMD_SENT, }; /** LBS_MEDIA_STATE */ diff --git a/drivers/net/wireless/libertas/dev.h b/drivers/net/wireless/libertas/dev.h index f5bb40c54d8..fd59e181646 100644 --- a/drivers/net/wireless/libertas/dev.h +++ b/drivers/net/wireless/libertas/dev.h @@ -253,7 +253,9 @@ struct lbs_private { u32 connect_status; u32 mesh_connect_status; u16 regioncode; - u16 txpowerlevel; + s16 txpower_cur; + s16 txpower_min; + s16 txpower_max; /** POWER MANAGEMENT AND PnP SUPPORT */ u8 surpriseremoved; @@ -291,8 +293,7 @@ struct lbs_private { u16 nextSNRNF; u16 numSNRNF; - u8 radioon; - u32 preamble; + u8 radio_on; /** data rate stuff */ u8 cur_rate; diff --git a/drivers/net/wireless/libertas/host.h b/drivers/net/wireless/libertas/host.h index c92e41b4faf..da618fc997c 100644 --- a/drivers/net/wireless/libertas/host.h +++ b/drivers/net/wireless/libertas/host.h @@ -61,7 +61,6 @@ #define CMD_RF_REG_MAP 0x0023 #define CMD_802_11_DEAUTHENTICATE 0x0024 #define CMD_802_11_REASSOCIATE 0x0025 -#define CMD_802_11_DISASSOCIATE 0x0026 #define CMD_MAC_CONTROL 0x0028 #define CMD_802_11_AD_HOC_START 0x002b #define CMD_802_11_AD_HOC_JOIN 0x002c @@ -153,11 +152,6 @@ #define CMD_ACT_MAC_ALL_MULTICAST_ENABLE 0x0100 #define CMD_ACT_MAC_STRICT_PROTECTION_ENABLE 0x0400 -/* Define action or option for CMD_802_11_RADIO_CONTROL */ -#define CMD_TYPE_AUTO_PREAMBLE 0x0001 -#define CMD_TYPE_SHORT_PREAMBLE 0x0002 -#define CMD_TYPE_LONG_PREAMBLE 0x0003 - /* Event flags for CMD_802_11_SUBSCRIBE_EVENT */ #define CMD_SUBSCRIBE_RSSI_LOW 0x0001 #define CMD_SUBSCRIBE_SNR_LOW 0x0002 @@ -166,28 +160,14 @@ #define CMD_SUBSCRIBE_RSSI_HIGH 0x0010 #define CMD_SUBSCRIBE_SNR_HIGH 0x0020 -#define TURN_ON_RF 0x01 -#define RADIO_ON 0x01 -#define RADIO_OFF 0x00 - -#define SET_AUTO_PREAMBLE 0x05 -#define SET_SHORT_PREAMBLE 0x03 -#define SET_LONG_PREAMBLE 0x01 +#define RADIO_PREAMBLE_LONG 0x00 +#define RADIO_PREAMBLE_SHORT 0x02 +#define RADIO_PREAMBLE_AUTO 0x04 /* Define action or option for CMD_802_11_RF_CHANNEL */ #define CMD_OPT_802_11_RF_CHANNEL_GET 0x00 #define CMD_OPT_802_11_RF_CHANNEL_SET 0x01 -/* Define action or option for CMD_802_11_RF_TX_POWER */ -#define CMD_ACT_TX_POWER_OPT_GET 0x0000 -#define CMD_ACT_TX_POWER_OPT_SET_HIGH 0x8007 -#define CMD_ACT_TX_POWER_OPT_SET_MID 0x8004 -#define CMD_ACT_TX_POWER_OPT_SET_LOW 0x8000 - -#define CMD_ACT_TX_POWER_INDEX_HIGH 0x0007 -#define CMD_ACT_TX_POWER_INDEX_MID 0x0004 -#define CMD_ACT_TX_POWER_INDEX_LOW 0x0000 - /* Define action or option for CMD_802_11_DATA_RATE */ #define CMD_ACT_SET_TX_AUTO 0x0000 #define CMD_ACT_SET_TX_FIX_RATE 0x0001 diff --git a/drivers/net/wireless/libertas/hostcmd.h b/drivers/net/wireless/libertas/hostcmd.h index 913b480211a..d27c276b219 100644 --- a/drivers/net/wireless/libertas/hostcmd.h +++ b/drivers/net/wireless/libertas/hostcmd.h @@ -232,7 +232,9 @@ struct cmd_ds_802_11_authenticate { }; struct cmd_ds_802_11_deauthenticate { - u8 macaddr[6]; + struct cmd_header hdr; + + u8 macaddr[ETH_ALEN]; __le16 reasoncode; }; @@ -251,20 +253,10 @@ struct cmd_ds_802_11_associate { #endif } __attribute__ ((packed)); -struct cmd_ds_802_11_disassociate { - u8 destmacaddr[6]; - __le16 reasoncode; -}; - struct cmd_ds_802_11_associate_rsp { struct ieeetypes_assocrsp assocRsp; }; -struct cmd_ds_802_11_ad_hoc_result { - u8 pad[3]; - u8 bssid[ETH_ALEN]; -}; - struct cmd_ds_802_11_set_wep { struct cmd_header hdr; @@ -435,8 +427,12 @@ struct cmd_ds_802_11_mac_address { }; struct cmd_ds_802_11_rf_tx_power { + struct cmd_header hdr; + __le16 action; - __le16 currentlevel; + __le16 curlevel; + s8 maxlevel; + s8 minlevel; }; struct cmd_ds_802_11_rf_antenna { @@ -507,10 +503,12 @@ struct cmd_ds_802_11_rate_adapt_rateset { }; struct cmd_ds_802_11_ad_hoc_start { + struct cmd_header hdr; + u8 ssid[IW_ESSID_MAX_SIZE]; u8 bsstype; __le16 beaconperiod; - u8 dtimperiod; + u8 dtimperiod; /* Reserved on v9 and later */ union IEEEtypes_ssparamset ssparamset; union ieeetypes_phyparamset phyparamset; __le16 probedelay; @@ -519,9 +517,16 @@ struct cmd_ds_802_11_ad_hoc_start { u8 tlv_memory_size_pad[100]; } __attribute__ ((packed)); +struct cmd_ds_802_11_ad_hoc_result { + struct cmd_header hdr; + + u8 pad[3]; + u8 bssid[ETH_ALEN]; +}; + struct adhoc_bssdesc { - u8 bssid[6]; - u8 ssid[32]; + u8 bssid[ETH_ALEN]; + u8 ssid[IW_ESSID_MAX_SIZE]; u8 type; __le16 beaconperiod; u8 dtimperiod; @@ -539,10 +544,15 @@ struct adhoc_bssdesc { } __attribute__ ((packed)); struct cmd_ds_802_11_ad_hoc_join { + struct cmd_header hdr; + struct adhoc_bssdesc bss; - __le16 failtimeout; - __le16 probedelay; + __le16 failtimeout; /* Reserved on v9 and later */ + __le16 probedelay; /* Reserved on v9 and later */ +} __attribute__ ((packed)); +struct cmd_ds_802_11_ad_hoc_stop { + struct cmd_header hdr; } __attribute__ ((packed)); struct cmd_ds_802_11_enable_rsn { @@ -693,21 +703,15 @@ struct cmd_ds_command { union { struct cmd_ds_802_11_ps_mode psmode; struct cmd_ds_802_11_associate associate; - struct cmd_ds_802_11_deauthenticate deauth; - struct cmd_ds_802_11_ad_hoc_start ads; struct cmd_ds_802_11_reset reset; - struct cmd_ds_802_11_ad_hoc_result result; struct cmd_ds_802_11_authenticate auth; struct cmd_ds_802_11_get_stat gstat; struct cmd_ds_802_3_get_stat gstat_8023; struct cmd_ds_802_11_snmp_mib smib; - struct cmd_ds_802_11_rf_tx_power txp; struct cmd_ds_802_11_rf_antenna rant; struct cmd_ds_802_11_monitor_mode monitor; - struct cmd_ds_802_11_ad_hoc_join adj; struct cmd_ds_802_11_rssi rssi; struct cmd_ds_802_11_rssi_rsp rssirsp; - struct cmd_ds_802_11_disassociate dassociate; struct cmd_ds_mac_reg_access macreg; struct cmd_ds_bbp_reg_access bbpreg; struct cmd_ds_rf_reg_access rfreg; diff --git a/drivers/net/wireless/libertas/if_cs.c b/drivers/net/wireless/libertas/if_cs.c index 8941919001b..e3505c110af 100644 --- a/drivers/net/wireless/libertas/if_cs.c +++ b/drivers/net/wireless/libertas/if_cs.c @@ -713,7 +713,7 @@ static int if_cs_host_to_card(struct lbs_private *priv, ret = if_cs_send_cmd(priv, buf, nb); break; default: - lbs_pr_err("%s: unsupported type %d\n", __FUNCTION__, type); + lbs_pr_err("%s: unsupported type %d\n", __func__, type); } lbs_deb_leave_args(LBS_DEB_CS, "ret %d", ret); diff --git a/drivers/net/wireless/libertas/if_usb.c b/drivers/net/wireless/libertas/if_usb.c index 632c291404a..7b02d612b07 100644 --- a/drivers/net/wireless/libertas/if_usb.c +++ b/drivers/net/wireless/libertas/if_usb.c @@ -39,7 +39,10 @@ MODULE_DEVICE_TABLE(usb, if_usb_table); static void if_usb_receive(struct urb *urb); static void if_usb_receive_fwload(struct urb *urb); -static int if_usb_prog_firmware(struct if_usb_card *cardp); +static int __if_usb_prog_firmware(struct if_usb_card *cardp, + const char *fwname, int cmd); +static int if_usb_prog_firmware(struct if_usb_card *cardp, + const char *fwname, int cmd); static int if_usb_host_to_card(struct lbs_private *priv, uint8_t type, uint8_t *payload, uint16_t nb); static int usb_tx_block(struct if_usb_card *cardp, uint8_t *payload, @@ -48,6 +51,62 @@ static void if_usb_free(struct if_usb_card *cardp); static int if_usb_submit_rx_urb(struct if_usb_card *cardp); static int if_usb_reset_device(struct if_usb_card *cardp); +/* sysfs hooks */ + +/** + * Set function to write firmware to device's persistent memory + */ +static ssize_t if_usb_firmware_set(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + struct lbs_private *priv = to_net_dev(dev)->priv; + struct if_usb_card *cardp = priv->card; + char fwname[FIRMWARE_NAME_MAX]; + int ret; + + sscanf(buf, "%29s", fwname); /* FIRMWARE_NAME_MAX - 1 = 29 */ + ret = if_usb_prog_firmware(cardp, fwname, BOOT_CMD_UPDATE_FW); + if (ret == 0) + return count; + + return ret; +} + +/** + * lbs_flash_fw attribute to be exported per ethX interface through sysfs + * (/sys/class/net/ethX/lbs_flash_fw). Use this like so to write firmware to + * the device's persistent memory: + * echo usb8388-5.126.0.p5.bin > /sys/class/net/ethX/lbs_flash_fw + */ +static DEVICE_ATTR(lbs_flash_fw, 0200, NULL, if_usb_firmware_set); + +/** + * Set function to write firmware to device's persistent memory + */ +static ssize_t if_usb_boot2_set(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + struct lbs_private *priv = to_net_dev(dev)->priv; + struct if_usb_card *cardp = priv->card; + char fwname[FIRMWARE_NAME_MAX]; + int ret; + + sscanf(buf, "%29s", fwname); /* FIRMWARE_NAME_MAX - 1 = 29 */ + ret = if_usb_prog_firmware(cardp, fwname, BOOT_CMD_UPDATE_BOOT2); + if (ret == 0) + return count; + + return ret; +} + +/** + * lbs_flash_boot2 attribute to be exported per ethX interface through sysfs + * (/sys/class/net/ethX/lbs_flash_boot2). Use this like so to write firmware + * to the device's persistent memory: + * echo usb8388-5.126.0.p5.bin > /sys/class/net/ethX/lbs_flash_boot2 + */ +static DEVICE_ATTR(lbs_flash_boot2, 0200, NULL, if_usb_boot2_set); + /** * @brief call back function to handle the status of the URB * @param urb pointer to urb structure @@ -66,10 +125,10 @@ static void if_usb_write_bulk_callback(struct urb *urb) lbs_deb_usb2(&urb->dev->dev, "Actual length transmitted %d\n", urb->actual_length); - /* Used for both firmware TX and regular TX. priv isn't - * valid at firmware load time. + /* Boot commands such as UPDATE_FW and UPDATE_BOOT2 are not + * passed up to the lbs level. */ - if (priv) + if (priv && priv->dnld_sent != DNLD_BOOTCMD_SENT) lbs_host_to_card_done(priv); } else { /* print the failure status number for debug */ @@ -231,7 +290,7 @@ static int if_usb_probe(struct usb_interface *intf, } /* Upload firmware */ - if (if_usb_prog_firmware(cardp)) { + if (__if_usb_prog_firmware(cardp, lbs_fw_name, BOOT_CMD_FW_BY_USB)) { lbs_deb_usbd(&udev->dev, "FW upload failed\n"); goto err_prog_firmware; } @@ -260,6 +319,12 @@ static int if_usb_probe(struct usb_interface *intf, usb_get_dev(udev); usb_set_intfdata(intf, cardp); + if (device_create_file(&priv->dev->dev, &dev_attr_lbs_flash_fw)) + lbs_pr_err("cannot register lbs_flash_fw attribute\n"); + + if (device_create_file(&priv->dev->dev, &dev_attr_lbs_flash_boot2)) + lbs_pr_err("cannot register lbs_flash_boot2 attribute\n"); + return 0; err_start_card: @@ -285,6 +350,9 @@ static void if_usb_disconnect(struct usb_interface *intf) lbs_deb_enter(LBS_DEB_MAIN); + device_remove_file(&priv->dev->dev, &dev_attr_lbs_flash_boot2); + device_remove_file(&priv->dev->dev, &dev_attr_lbs_flash_fw); + cardp->surprise_removed = 1; if (priv) { @@ -510,7 +578,7 @@ static void if_usb_receive_fwload(struct urb *urb) if (le16_to_cpu(cardp->udev->descriptor.bcdDevice) < 0x3106) { kfree_skb(skb); if_usb_submit_rx_urb_fwload(cardp); - cardp->bootcmdresp = 1; + cardp->bootcmdresp = BOOT_CMD_RESP_OK; lbs_deb_usbd(&cardp->udev->dev, "Received valid boot command response\n"); return; @@ -526,7 +594,9 @@ static void if_usb_receive_fwload(struct urb *urb) lbs_pr_info("boot cmd response wrong magic number (0x%x)\n", le32_to_cpu(bootcmdresp.magic)); } - } else if (bootcmdresp.cmd != BOOT_CMD_FW_BY_USB) { + } else if ((bootcmdresp.cmd != BOOT_CMD_FW_BY_USB) && + (bootcmdresp.cmd != BOOT_CMD_UPDATE_FW) && + (bootcmdresp.cmd != BOOT_CMD_UPDATE_BOOT2)) { lbs_pr_info("boot cmd response cmd_tag error (%d)\n", bootcmdresp.cmd); } else if (bootcmdresp.result != BOOT_CMD_RESP_OK) { @@ -564,8 +634,8 @@ static void if_usb_receive_fwload(struct urb *urb) kfree_skb(skb); - /* reschedule timer for 200ms hence */ - mod_timer(&cardp->fw_timeout, jiffies + (HZ/5)); + /* Give device 5s to either write firmware to its RAM or eeprom */ + mod_timer(&cardp->fw_timeout, jiffies + (HZ*5)); if (cardp->fwfinalblk) { cardp->fwdnldover = 1; @@ -809,7 +879,54 @@ static int check_fwfile_format(const uint8_t *data, uint32_t totlen) } -static int if_usb_prog_firmware(struct if_usb_card *cardp) +/** +* @brief This function programs the firmware subject to cmd +* +* @param cardp the if_usb_card descriptor +* fwname firmware or boot2 image file name +* cmd either BOOT_CMD_FW_BY_USB, BOOT_CMD_UPDATE_FW, +* or BOOT_CMD_UPDATE_BOOT2. +* @return 0 or error code +*/ +static int if_usb_prog_firmware(struct if_usb_card *cardp, + const char *fwname, int cmd) +{ + struct lbs_private *priv = cardp->priv; + unsigned long flags, caps; + int ret; + + caps = priv->fwcapinfo; + if (((cmd == BOOT_CMD_UPDATE_FW) && !(caps & FW_CAPINFO_FIRMWARE_UPGRADE)) || + ((cmd == BOOT_CMD_UPDATE_BOOT2) && !(caps & FW_CAPINFO_BOOT2_UPGRADE))) + return -EOPNOTSUPP; + + /* Ensure main thread is idle. */ + spin_lock_irqsave(&priv->driver_lock, flags); + while (priv->cur_cmd != NULL || priv->dnld_sent != DNLD_RES_RECEIVED) { + spin_unlock_irqrestore(&priv->driver_lock, flags); + if (wait_event_interruptible(priv->waitq, + (priv->cur_cmd == NULL && + priv->dnld_sent == DNLD_RES_RECEIVED))) { + return -ERESTARTSYS; + } + spin_lock_irqsave(&priv->driver_lock, flags); + } + priv->dnld_sent = DNLD_BOOTCMD_SENT; + spin_unlock_irqrestore(&priv->driver_lock, flags); + + ret = __if_usb_prog_firmware(cardp, fwname, cmd); + + spin_lock_irqsave(&priv->driver_lock, flags); + priv->dnld_sent = DNLD_RES_RECEIVED; + spin_unlock_irqrestore(&priv->driver_lock, flags); + + wake_up_interruptible(&priv->waitq); + + return ret; +} + +static int __if_usb_prog_firmware(struct if_usb_card *cardp, + const char *fwname, int cmd) { int i = 0; static int reset_count = 10; @@ -817,20 +934,32 @@ static int if_usb_prog_firmware(struct if_usb_card *cardp) lbs_deb_enter(LBS_DEB_USB); - if ((ret = request_firmware(&cardp->fw, lbs_fw_name, - &cardp->udev->dev)) < 0) { + ret = request_firmware(&cardp->fw, fwname, &cardp->udev->dev); + if (ret < 0) { lbs_pr_err("request_firmware() failed with %#x\n", ret); - lbs_pr_err("firmware %s not found\n", lbs_fw_name); + lbs_pr_err("firmware %s not found\n", fwname); goto done; } - if (check_fwfile_format(cardp->fw->data, cardp->fw->size)) + if (check_fwfile_format(cardp->fw->data, cardp->fw->size)) { + ret = -EINVAL; goto release_fw; + } + + /* Cancel any pending usb business */ + usb_kill_urb(cardp->rx_urb); + usb_kill_urb(cardp->tx_urb); + + cardp->fwlastblksent = 0; + cardp->fwdnldover = 0; + cardp->totalbytes = 0; + cardp->fwfinalblk = 0; + cardp->bootcmdresp = 0; restart: if (if_usb_submit_rx_urb_fwload(cardp) < 0) { lbs_deb_usbd(&cardp->udev->dev, "URB submission is failed\n"); - ret = -1; + ret = -EIO; goto release_fw; } @@ -838,8 +967,7 @@ restart: do { int j = 0; i++; - /* Issue Boot command = 1, Boot from Download-FW */ - if_usb_issue_boot_command(cardp, BOOT_CMD_FW_BY_USB); + if_usb_issue_boot_command(cardp, cmd); /* wait for command response */ do { j++; @@ -847,12 +975,21 @@ restart: } while (cardp->bootcmdresp == 0 && j < 10); } while (cardp->bootcmdresp == 0 && i < 5); - if (cardp->bootcmdresp <= 0) { + if (cardp->bootcmdresp == BOOT_CMD_RESP_NOT_SUPPORTED) { + /* Return to normal operation */ + ret = -EOPNOTSUPP; + usb_kill_urb(cardp->rx_urb); + usb_kill_urb(cardp->tx_urb); + if (if_usb_submit_rx_urb(cardp) < 0) + ret = -EIO; + goto release_fw; + } else if (cardp->bootcmdresp <= 0) { if (--reset_count >= 0) { if_usb_reset_device(cardp); goto restart; } - return -1; + ret = -EIO; + goto release_fw; } i = 0; @@ -882,7 +1019,7 @@ restart: } lbs_pr_info("FW download failure, time = %d ms\n", i * 100); - ret = -1; + ret = -EIO; goto release_fw; } diff --git a/drivers/net/wireless/libertas/if_usb.h b/drivers/net/wireless/libertas/if_usb.h index 5771a83a43f..5ba0aee0eb2 100644 --- a/drivers/net/wireless/libertas/if_usb.h +++ b/drivers/net/wireless/libertas/if_usb.h @@ -30,6 +30,7 @@ struct bootcmd #define BOOT_CMD_RESP_OK 0x0001 #define BOOT_CMD_RESP_FAIL 0x0000 +#define BOOT_CMD_RESP_NOT_SUPPORTED 0x0002 struct bootcmdresp { @@ -50,6 +51,10 @@ struct if_usb_card { uint8_t ep_in; uint8_t ep_out; + /* bootcmdresp == 0 means command is pending + * bootcmdresp < 0 means error + * bootcmdresp > 0 is a BOOT_CMD_RESP_* from firmware + */ int8_t bootcmdresp; int ep_in_size; diff --git a/drivers/net/wireless/libertas/main.c b/drivers/net/wireless/libertas/main.c index bd32ac0b4e0..2436634b6b7 100644 --- a/drivers/net/wireless/libertas/main.c +++ b/drivers/net/wireless/libertas/main.c @@ -291,9 +291,11 @@ static ssize_t lbs_rtap_set(struct device *dev, if (priv->infra_open || priv->mesh_open) return -EBUSY; if (priv->mode == IW_MODE_INFRA) - lbs_send_deauthentication(priv); + lbs_cmd_80211_deauthenticate(priv, + priv->curbssparams.bssid, + WLAN_REASON_DEAUTH_LEAVING); else if (priv->mode == IW_MODE_ADHOC) - lbs_stop_adhoc_network(priv); + lbs_adhoc_stop(priv); lbs_add_rtap(priv); } priv->monitormode = monitor_mode; @@ -956,17 +958,24 @@ EXPORT_SYMBOL_GPL(lbs_resume); static int lbs_setup_firmware(struct lbs_private *priv) { int ret = -1; + s16 curlevel = 0, minlevel = 0, maxlevel = 0; lbs_deb_enter(LBS_DEB_FW); - /* - * Read MAC address from HW - */ + /* Read MAC address from firmware */ memset(priv->current_addr, 0xff, ETH_ALEN); ret = lbs_update_hw_spec(priv); if (ret) goto done; + /* Read power levels if available */ + ret = lbs_get_tx_power(priv, &curlevel, &minlevel, &maxlevel); + if (ret == 0) { + priv->txpower_cur = curlevel; + priv->txpower_min = minlevel; + priv->txpower_max = maxlevel; + } + lbs_set_mac_control(priv); done: lbs_deb_leave_args(LBS_DEB_FW, "ret %d", ret); @@ -1042,7 +1051,7 @@ static int lbs_init_adapter(struct lbs_private *priv) priv->mode = IW_MODE_INFRA; priv->curbssparams.channel = DEFAULT_AD_HOC_CHANNEL; priv->mac_control = CMD_ACT_MAC_RX_ON | CMD_ACT_MAC_TX_ON; - priv->radioon = RADIO_ON; + priv->radio_on = 1; priv->enablehwauto = 1; priv->capability = WLAN_CAPABILITY_SHORT_PREAMBLE; priv->psmode = LBS802_11POWERMODECAM; diff --git a/drivers/net/wireless/libertas/scan.c b/drivers/net/wireless/libertas/scan.c index 4b274562f96..8f66903641b 100644 --- a/drivers/net/wireless/libertas/scan.c +++ b/drivers/net/wireless/libertas/scan.c @@ -944,6 +944,11 @@ int lbs_set_scan(struct net_device *dev, struct iw_request_info *info, lbs_deb_enter(LBS_DEB_WEXT); + if (!priv->radio_on) { + ret = -EINVAL; + goto out; + } + if (!netif_running(dev)) { ret = -ENETDOWN; goto out; diff --git a/drivers/net/wireless/libertas/wext.c b/drivers/net/wireless/libertas/wext.c index 8b3ed77860b..426f1fe3bb4 100644 --- a/drivers/net/wireless/libertas/wext.c +++ b/drivers/net/wireless/libertas/wext.c @@ -120,34 +120,6 @@ static struct chan_freq_power *find_cfp_by_band_and_freq( return cfp; } - -/** - * @brief Set Radio On/OFF - * - * @param priv A pointer to struct lbs_private structure - * @option Radio Option - * @return 0 --success, otherwise fail - */ -static int lbs_radio_ioctl(struct lbs_private *priv, u8 option) -{ - int ret = 0; - - lbs_deb_enter(LBS_DEB_WEXT); - - if (priv->radioon != option) { - lbs_deb_wext("switching radio %s\n", option ? "on" : "off"); - priv->radioon = option; - - ret = lbs_prepare_and_send_command(priv, - CMD_802_11_RADIO_CONTROL, - CMD_ACT_SET, - CMD_OPTION_WAITFORRSP, 0, NULL); - } - - lbs_deb_leave_args(LBS_DEB_WEXT, "ret %d", ret); - return ret; -} - /** * @brief Copy active data rates based on adapter mode and status * @@ -420,28 +392,30 @@ static int lbs_get_txpow(struct net_device *dev, struct iw_request_info *info, struct iw_param *vwrq, char *extra) { - int ret = 0; struct lbs_private *priv = dev->priv; + s16 curlevel = 0; + int ret = 0; lbs_deb_enter(LBS_DEB_WEXT); - ret = lbs_prepare_and_send_command(priv, - CMD_802_11_RF_TX_POWER, - CMD_ACT_TX_POWER_OPT_GET, - CMD_OPTION_WAITFORRSP, 0, NULL); + if (!priv->radio_on) { + lbs_deb_wext("tx power off\n"); + vwrq->value = 0; + vwrq->disabled = 1; + goto out; + } + ret = lbs_get_tx_power(priv, &curlevel, NULL, NULL); if (ret) goto out; - lbs_deb_wext("tx power level %d dbm\n", priv->txpowerlevel); - vwrq->value = priv->txpowerlevel; + lbs_deb_wext("tx power level %d dbm\n", curlevel); + priv->txpower_cur = curlevel; + + vwrq->value = curlevel; vwrq->fixed = 1; - if (priv->radioon) { - vwrq->disabled = 0; - vwrq->flags = IW_TXPOW_DBM; - } else { - vwrq->disabled = 1; - } + vwrq->disabled = 0; + vwrq->flags = IW_TXPOW_DBM; out: lbs_deb_leave_args(LBS_DEB_WEXT, "ret %d", ret); @@ -693,22 +667,12 @@ static int lbs_get_range(struct net_device *dev, struct iw_request_info *info, range->sensitivity = 0; - /* - * Setup the supported power level ranges - */ + /* Setup the supported power level ranges */ memset(range->txpower, 0, sizeof(range->txpower)); - range->txpower[0] = 5; - range->txpower[1] = 7; - range->txpower[2] = 9; - range->txpower[3] = 11; - range->txpower[4] = 13; - range->txpower[5] = 15; - range->txpower[6] = 17; - range->txpower[7] = 19; - - range->num_txpower = 8; - range->txpower_capa = IW_TXPOW_DBM; - range->txpower_capa |= IW_TXPOW_RANGE; + range->txpower_capa = IW_TXPOW_DBM | IW_TXPOW_RANGE; + range->txpower[0] = priv->txpower_min; + range->txpower[1] = priv->txpower_max; + range->num_txpower = 2; range->event_capa[0] = (IW_EVENT_CAPA_K_0 | IW_EVENT_CAPA_MASK(SIOCGIWAP) | @@ -998,9 +962,11 @@ static int lbs_mesh_set_freq(struct net_device *dev, if (fwrq->m != priv->curbssparams.channel) { lbs_deb_wext("mesh channel change forces eth disconnect\n"); if (priv->mode == IW_MODE_INFRA) - lbs_send_deauthentication(priv); + lbs_cmd_80211_deauthenticate(priv, + priv->curbssparams.bssid, + WLAN_REASON_DEAUTH_LEAVING); else if (priv->mode == IW_MODE_ADHOC) - lbs_stop_adhoc_network(priv); + lbs_adhoc_stop(priv); } lbs_mesh_config(priv, CMD_ACT_MESH_CONFIG_START, fwrq->m); lbs_update_channel(priv); @@ -1844,39 +1810,50 @@ static int lbs_set_txpow(struct net_device *dev, struct iw_request_info *info, { int ret = 0; struct lbs_private *priv = dev->priv; - - u16 dbm; + s16 dbm = (s16) vwrq->value; lbs_deb_enter(LBS_DEB_WEXT); if (vwrq->disabled) { - lbs_radio_ioctl(priv, RADIO_OFF); - return 0; + lbs_set_radio(priv, RADIO_PREAMBLE_AUTO, 0); + goto out; } - priv->preamble = CMD_TYPE_AUTO_PREAMBLE; - - lbs_radio_ioctl(priv, RADIO_ON); + if (vwrq->fixed == 0) { + /* Auto power control */ + dbm = priv->txpower_max; + } else { + /* Userspace check in iwrange if it should use dBm or mW, + * therefore this should never happen... Jean II */ + if ((vwrq->flags & IW_TXPOW_TYPE) != IW_TXPOW_DBM) { + ret = -EOPNOTSUPP; + goto out; + } - /* Userspace check in iwrange if it should use dBm or mW, - * therefore this should never happen... Jean II */ - if ((vwrq->flags & IW_TXPOW_TYPE) == IW_TXPOW_MWATT) { - return -EOPNOTSUPP; - } else - dbm = (u16) vwrq->value; + /* Validate requested power level against firmware allowed levels */ + if (priv->txpower_min && (dbm < priv->txpower_min)) { + ret = -EINVAL; + goto out; + } - /* auto tx power control */ + if (priv->txpower_max && (dbm > priv->txpower_max)) { + ret = -EINVAL; + goto out; + } + } - if (vwrq->fixed == 0) - dbm = 0xffff; + /* If the radio was off, turn it on */ + if (!priv->radio_on) { + ret = lbs_set_radio(priv, RADIO_PREAMBLE_AUTO, 1); + if (ret) + goto out; + } - lbs_deb_wext("txpower set %d dbm\n", dbm); + lbs_deb_wext("txpower set %d dBm\n", dbm); - ret = lbs_prepare_and_send_command(priv, - CMD_802_11_RF_TX_POWER, - CMD_ACT_TX_POWER_OPT_SET_LOW, - CMD_OPTION_WAITFORRSP, 0, (void *)&dbm); + ret = lbs_set_tx_power(priv, dbm); +out: lbs_deb_leave_args(LBS_DEB_WEXT, "ret %d", ret); return ret; } @@ -1928,6 +1905,11 @@ static int lbs_set_essid(struct net_device *dev, struct iw_request_info *info, lbs_deb_enter(LBS_DEB_WEXT); + if (!priv->radio_on) { + ret = -EINVAL; + goto out; + } + /* Check the size of the string */ if (in_ssid_len > IW_ESSID_MAX_SIZE) { ret = -E2BIG; @@ -2005,6 +1987,11 @@ static int lbs_mesh_set_essid(struct net_device *dev, lbs_deb_enter(LBS_DEB_WEXT); + if (!priv->radio_on) { + ret = -EINVAL; + goto out; + } + /* Check the size of the string */ if (dwrq->length > IW_ESSID_MAX_SIZE) { ret = -E2BIG; @@ -2046,6 +2033,9 @@ static int lbs_set_wap(struct net_device *dev, struct iw_request_info *info, lbs_deb_enter(LBS_DEB_WEXT); + if (!priv->radio_on) + return -EINVAL; + if (awrq->sa_family != ARPHRD_ETHER) return -EINVAL; diff --git a/drivers/net/wireless/libertas_tf/Makefile b/drivers/net/wireless/libertas_tf/Makefile new file mode 100644 index 00000000000..ff5544d6ac9 --- /dev/null +++ b/drivers/net/wireless/libertas_tf/Makefile @@ -0,0 +1,6 @@ +libertas_tf-objs := main.o cmd.o + +libertas_tf_usb-objs += if_usb.o + +obj-$(CONFIG_LIBERTAS_THINFIRM) += libertas_tf.o +obj-$(CONFIG_LIBERTAS_THINFIRM_USB) += libertas_tf_usb.o diff --git a/drivers/net/wireless/libertas_tf/cmd.c b/drivers/net/wireless/libertas_tf/cmd.c new file mode 100644 index 00000000000..fdbcf8ba3e8 --- /dev/null +++ b/drivers/net/wireless/libertas_tf/cmd.c @@ -0,0 +1,669 @@ +/* + * Copyright (C) 2008, cozybit Inc. + * Copyright (C) 2003-2006, Marvell International Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or (at + * your option) any later version. + */ +#include "libertas_tf.h" + +static const struct channel_range channel_ranges[] = { + { LBTF_REGDOMAIN_US, 1, 12 }, + { LBTF_REGDOMAIN_CA, 1, 12 }, + { LBTF_REGDOMAIN_EU, 1, 14 }, + { LBTF_REGDOMAIN_JP, 1, 14 }, + { LBTF_REGDOMAIN_SP, 1, 14 }, + { LBTF_REGDOMAIN_FR, 1, 14 }, +}; + +static u16 lbtf_region_code_to_index[MRVDRV_MAX_REGION_CODE] = +{ + LBTF_REGDOMAIN_US, LBTF_REGDOMAIN_CA, LBTF_REGDOMAIN_EU, + LBTF_REGDOMAIN_SP, LBTF_REGDOMAIN_FR, LBTF_REGDOMAIN_JP, +}; + +static struct cmd_ctrl_node *lbtf_get_cmd_ctrl_node(struct lbtf_private *priv); + + +/** + * lbtf_cmd_copyback - Simple callback that copies response back into command + * + * @priv A pointer to struct lbtf_private structure + * @extra A pointer to the original command structure for which + * 'resp' is a response + * @resp A pointer to the command response + * + * Returns: 0 on success, error on failure + */ +int lbtf_cmd_copyback(struct lbtf_private *priv, unsigned long extra, + struct cmd_header *resp) +{ + struct cmd_header *buf = (void *)extra; + uint16_t copy_len; + + copy_len = min(le16_to_cpu(buf->size), le16_to_cpu(resp->size)); + memcpy(buf, resp, copy_len); + return 0; +} +EXPORT_SYMBOL_GPL(lbtf_cmd_copyback); + +#define CHAN_TO_IDX(chan) ((chan) - 1) + +static void lbtf_geo_init(struct lbtf_private *priv) +{ + const struct channel_range *range = channel_ranges; + u8 ch; + int i; + + for (i = 0; i < ARRAY_SIZE(channel_ranges); i++) + if (channel_ranges[i].regdomain == priv->regioncode) { + range = &channel_ranges[i]; + break; + } + + for (ch = priv->range.start; ch < priv->range.end; ch++) + priv->channels[CHAN_TO_IDX(ch)].flags = 0; +} + +/** + * lbtf_update_hw_spec: Updates the hardware details. + * + * @priv A pointer to struct lbtf_private structure + * + * Returns: 0 on success, error on failure + */ +int lbtf_update_hw_spec(struct lbtf_private *priv) +{ + struct cmd_ds_get_hw_spec cmd; + int ret = -1; + u32 i; + DECLARE_MAC_BUF(mac); + + memset(&cmd, 0, sizeof(cmd)); + cmd.hdr.size = cpu_to_le16(sizeof(cmd)); + memcpy(cmd.permanentaddr, priv->current_addr, ETH_ALEN); + ret = lbtf_cmd_with_response(priv, CMD_GET_HW_SPEC, &cmd); + if (ret) + goto out; + + priv->fwcapinfo = le32_to_cpu(cmd.fwcapinfo); + + /* The firmware release is in an interesting format: the patch + * level is in the most significant nibble ... so fix that: */ + priv->fwrelease = le32_to_cpu(cmd.fwrelease); + priv->fwrelease = (priv->fwrelease << 8) | + (priv->fwrelease >> 24 & 0xff); + + printk(KERN_INFO "libertastf: %s, fw %u.%u.%up%u, cap 0x%08x\n", + print_mac(mac, cmd.permanentaddr), + priv->fwrelease >> 24 & 0xff, + priv->fwrelease >> 16 & 0xff, + priv->fwrelease >> 8 & 0xff, + priv->fwrelease & 0xff, + priv->fwcapinfo); + + /* Clamp region code to 8-bit since FW spec indicates that it should + * only ever be 8-bit, even though the field size is 16-bit. Some + * firmware returns non-zero high 8 bits here. + */ + priv->regioncode = le16_to_cpu(cmd.regioncode) & 0xFF; + + for (i = 0; i < MRVDRV_MAX_REGION_CODE; i++) { + /* use the region code to search for the index */ + if (priv->regioncode == lbtf_region_code_to_index[i]) + break; + } + + /* if it's unidentified region code, use the default (USA) */ + if (i >= MRVDRV_MAX_REGION_CODE) + priv->regioncode = 0x10; + + if (priv->current_addr[0] == 0xff) + memmove(priv->current_addr, cmd.permanentaddr, ETH_ALEN); + + SET_IEEE80211_PERM_ADDR(priv->hw, priv->current_addr); + + lbtf_geo_init(priv); +out: + return ret; +} + +/** + * lbtf_set_channel: Set the radio channel + * + * @priv A pointer to struct lbtf_private structure + * @channel The desired channel, or 0 to clear a locked channel + * + * Returns: 0 on success, error on failure + */ +int lbtf_set_channel(struct lbtf_private *priv, u8 channel) +{ + struct cmd_ds_802_11_rf_channel cmd; + + cmd.hdr.size = cpu_to_le16(sizeof(cmd)); + cmd.action = cpu_to_le16(CMD_OPT_802_11_RF_CHANNEL_SET); + cmd.channel = cpu_to_le16(channel); + + return lbtf_cmd_with_response(priv, CMD_802_11_RF_CHANNEL, &cmd); +} + +int lbtf_beacon_set(struct lbtf_private *priv, struct sk_buff *beacon) +{ + struct cmd_ds_802_11_beacon_set cmd; + int size; + + if (beacon->len > MRVL_MAX_BCN_SIZE) + return -1; + size = sizeof(cmd) - sizeof(cmd.beacon) + beacon->len; + cmd.hdr.size = cpu_to_le16(size); + cmd.len = cpu_to_le16(beacon->len); + memcpy(cmd.beacon, (u8 *) beacon->data, beacon->len); + + lbtf_cmd_async(priv, CMD_802_11_BEACON_SET, &cmd.hdr, size); + return 0; +} + +int lbtf_beacon_ctrl(struct lbtf_private *priv, bool beacon_enable, + int beacon_int) { + struct cmd_ds_802_11_beacon_control cmd; + + cmd.hdr.size = cpu_to_le16(sizeof(cmd)); + cmd.action = cpu_to_le16(CMD_ACT_SET); + cmd.beacon_enable = cpu_to_le16(beacon_enable); + cmd.beacon_period = cpu_to_le16(beacon_int); + + lbtf_cmd_async(priv, CMD_802_11_BEACON_CTRL, &cmd.hdr, sizeof(cmd)); + return 0; +} + +static void lbtf_queue_cmd(struct lbtf_private *priv, + struct cmd_ctrl_node *cmdnode) +{ + unsigned long flags; + + if (!cmdnode) + return; + + if (!cmdnode->cmdbuf->size) + return; + + cmdnode->result = 0; + spin_lock_irqsave(&priv->driver_lock, flags); + list_add_tail(&cmdnode->list, &priv->cmdpendingq); + spin_unlock_irqrestore(&priv->driver_lock, flags); +} + +static void lbtf_submit_command(struct lbtf_private *priv, + struct cmd_ctrl_node *cmdnode) +{ + unsigned long flags; + struct cmd_header *cmd; + uint16_t cmdsize; + uint16_t command; + int timeo = 5 * HZ; + int ret; + + cmd = cmdnode->cmdbuf; + + spin_lock_irqsave(&priv->driver_lock, flags); + priv->cur_cmd = cmdnode; + cmdsize = le16_to_cpu(cmd->size); + command = le16_to_cpu(cmd->command); + ret = priv->hw_host_to_card(priv, MVMS_CMD, (u8 *) cmd, cmdsize); + spin_unlock_irqrestore(&priv->driver_lock, flags); + + if (ret) + /* Let the timer kick in and retry, and potentially reset + the whole thing if the condition persists */ + timeo = HZ; + + /* Setup the timer after transmit command */ + mod_timer(&priv->command_timer, jiffies + timeo); +} + +/** + * This function inserts command node to cmdfreeq + * after cleans it. Requires priv->driver_lock held. + */ +static void __lbtf_cleanup_and_insert_cmd(struct lbtf_private *priv, + struct cmd_ctrl_node *cmdnode) +{ + if (!cmdnode) + return; + + cmdnode->callback = NULL; + cmdnode->callback_arg = 0; + + memset(cmdnode->cmdbuf, 0, LBS_CMD_BUFFER_SIZE); + + list_add_tail(&cmdnode->list, &priv->cmdfreeq); +} + +static void lbtf_cleanup_and_insert_cmd(struct lbtf_private *priv, + struct cmd_ctrl_node *ptempcmd) +{ + unsigned long flags; + + spin_lock_irqsave(&priv->driver_lock, flags); + __lbtf_cleanup_and_insert_cmd(priv, ptempcmd); + spin_unlock_irqrestore(&priv->driver_lock, flags); +} + +void lbtf_complete_command(struct lbtf_private *priv, struct cmd_ctrl_node *cmd, + int result) +{ + cmd->result = result; + cmd->cmdwaitqwoken = 1; + wake_up_interruptible(&cmd->cmdwait_q); + + if (!cmd->callback) + __lbtf_cleanup_and_insert_cmd(priv, cmd); + priv->cur_cmd = NULL; +} + +int lbtf_cmd_set_mac_multicast_addr(struct lbtf_private *priv) +{ + struct cmd_ds_mac_multicast_addr cmd; + + cmd.hdr.size = cpu_to_le16(sizeof(cmd)); + cmd.action = cpu_to_le16(CMD_ACT_SET); + + cmd.nr_of_adrs = cpu_to_le16((u16) priv->nr_of_multicastmacaddr); + memcpy(cmd.maclist, priv->multicastlist, + priv->nr_of_multicastmacaddr * ETH_ALEN); + + lbtf_cmd_async(priv, CMD_MAC_MULTICAST_ADR, &cmd.hdr, sizeof(cmd)); + return 0; +} + +void lbtf_set_mode(struct lbtf_private *priv, enum lbtf_mode mode) +{ + struct cmd_ds_set_mode cmd; + + cmd.hdr.size = cpu_to_le16(sizeof(cmd)); + cmd.mode = cpu_to_le16(mode); + lbtf_cmd_async(priv, CMD_802_11_SET_MODE, &cmd.hdr, sizeof(cmd)); +} + +void lbtf_set_bssid(struct lbtf_private *priv, bool activate, u8 *bssid) +{ + struct cmd_ds_set_bssid cmd; + + cmd.hdr.size = cpu_to_le16(sizeof(cmd)); + cmd.activate = activate ? 1 : 0; + if (activate) + memcpy(cmd.bssid, bssid, ETH_ALEN); + + lbtf_cmd_async(priv, CMD_802_11_SET_BSSID, &cmd.hdr, sizeof(cmd)); +} + +int lbtf_set_mac_address(struct lbtf_private *priv, uint8_t *mac_addr) +{ + struct cmd_ds_802_11_mac_address cmd; + + cmd.hdr.size = cpu_to_le16(sizeof(cmd)); + cmd.action = cpu_to_le16(CMD_ACT_SET); + + memcpy(cmd.macadd, mac_addr, ETH_ALEN); + + lbtf_cmd_async(priv, CMD_802_11_MAC_ADDRESS, &cmd.hdr, sizeof(cmd)); + return 0; +} + +int lbtf_set_radio_control(struct lbtf_private *priv) +{ + int ret = 0; + struct cmd_ds_802_11_radio_control cmd; + + cmd.hdr.size = cpu_to_le16(sizeof(cmd)); + cmd.action = cpu_to_le16(CMD_ACT_SET); + + switch (priv->preamble) { + case CMD_TYPE_SHORT_PREAMBLE: + cmd.control = cpu_to_le16(SET_SHORT_PREAMBLE); + break; + + case CMD_TYPE_LONG_PREAMBLE: + cmd.control = cpu_to_le16(SET_LONG_PREAMBLE); + break; + + case CMD_TYPE_AUTO_PREAMBLE: + default: + cmd.control = cpu_to_le16(SET_AUTO_PREAMBLE); + break; + } + + if (priv->radioon) + cmd.control |= cpu_to_le16(TURN_ON_RF); + else + cmd.control &= cpu_to_le16(~TURN_ON_RF); + + ret = lbtf_cmd_with_response(priv, CMD_802_11_RADIO_CONTROL, &cmd); + return ret; +} + +void lbtf_set_mac_control(struct lbtf_private *priv) +{ + struct cmd_ds_mac_control cmd; + cmd.hdr.size = cpu_to_le16(sizeof(cmd)); + cmd.action = cpu_to_le16(priv->mac_control); + cmd.reserved = 0; + + lbtf_cmd_async(priv, CMD_MAC_CONTROL, + &cmd.hdr, sizeof(cmd)); +} + +/** + * lbtf_allocate_cmd_buffer - Allocates cmd buffer, links it to free cmd queue + * + * @priv A pointer to struct lbtf_private structure + * + * Returns: 0 on success. + */ +int lbtf_allocate_cmd_buffer(struct lbtf_private *priv) +{ + u32 bufsize; + u32 i; + struct cmd_ctrl_node *cmdarray; + + /* Allocate and initialize the command array */ + bufsize = sizeof(struct cmd_ctrl_node) * LBS_NUM_CMD_BUFFERS; + cmdarray = kzalloc(bufsize, GFP_KERNEL); + if (!cmdarray) + return -1; + priv->cmd_array = cmdarray; + + /* Allocate and initialize each command buffer in the command array */ + for (i = 0; i < LBS_NUM_CMD_BUFFERS; i++) { + cmdarray[i].cmdbuf = kzalloc(LBS_CMD_BUFFER_SIZE, GFP_KERNEL); + if (!cmdarray[i].cmdbuf) + return -1; + } + + for (i = 0; i < LBS_NUM_CMD_BUFFERS; i++) { + init_waitqueue_head(&cmdarray[i].cmdwait_q); + lbtf_cleanup_and_insert_cmd(priv, &cmdarray[i]); + } + return 0; +} + +/** + * lbtf_free_cmd_buffer - Frees the cmd buffer. + * + * @priv A pointer to struct lbtf_private structure + * + * Returns: 0 + */ +int lbtf_free_cmd_buffer(struct lbtf_private *priv) +{ + struct cmd_ctrl_node *cmdarray; + unsigned int i; + + /* need to check if cmd array is allocated or not */ + if (priv->cmd_array == NULL) + return 0; + + cmdarray = priv->cmd_array; + + /* Release shared memory buffers */ + for (i = 0; i < LBS_NUM_CMD_BUFFERS; i++) { + kfree(cmdarray[i].cmdbuf); + cmdarray[i].cmdbuf = NULL; + } + + /* Release cmd_ctrl_node */ + kfree(priv->cmd_array); + priv->cmd_array = NULL; + + return 0; +} + +/** + * lbtf_get_cmd_ctrl_node - Gets free cmd node from free cmd queue. + * + * @priv A pointer to struct lbtf_private structure + * + * Returns: pointer to a struct cmd_ctrl_node or NULL if none available. + */ +static struct cmd_ctrl_node *lbtf_get_cmd_ctrl_node(struct lbtf_private *priv) +{ + struct cmd_ctrl_node *tempnode; + unsigned long flags; + + if (!priv) + return NULL; + + spin_lock_irqsave(&priv->driver_lock, flags); + + if (!list_empty(&priv->cmdfreeq)) { + tempnode = list_first_entry(&priv->cmdfreeq, + struct cmd_ctrl_node, list); + list_del(&tempnode->list); + } else + tempnode = NULL; + + spin_unlock_irqrestore(&priv->driver_lock, flags); + + return tempnode; +} + +/** + * lbtf_execute_next_command: execute next command in cmd pending queue. + * + * @priv A pointer to struct lbtf_private structure + * + * Returns: 0 on success. + */ +int lbtf_execute_next_command(struct lbtf_private *priv) +{ + struct cmd_ctrl_node *cmdnode = NULL; + struct cmd_header *cmd; + unsigned long flags; + + /* Debug group is LBS_DEB_THREAD and not LBS_DEB_HOST, because the + * only caller to us is lbtf_thread() and we get even when a + * data packet is received */ + + spin_lock_irqsave(&priv->driver_lock, flags); + + if (priv->cur_cmd) { + spin_unlock_irqrestore(&priv->driver_lock, flags); + return -1; + } + + if (!list_empty(&priv->cmdpendingq)) { + cmdnode = list_first_entry(&priv->cmdpendingq, + struct cmd_ctrl_node, list); + } + + if (cmdnode) { + cmd = cmdnode->cmdbuf; + + list_del(&cmdnode->list); + spin_unlock_irqrestore(&priv->driver_lock, flags); + lbtf_submit_command(priv, cmdnode); + } else + spin_unlock_irqrestore(&priv->driver_lock, flags); + return 0; +} + +static struct cmd_ctrl_node *__lbtf_cmd_async(struct lbtf_private *priv, + uint16_t command, struct cmd_header *in_cmd, int in_cmd_size, + int (*callback)(struct lbtf_private *, unsigned long, + struct cmd_header *), + unsigned long callback_arg) +{ + struct cmd_ctrl_node *cmdnode; + + if (priv->surpriseremoved) + return ERR_PTR(-ENOENT); + + cmdnode = lbtf_get_cmd_ctrl_node(priv); + if (cmdnode == NULL) { + /* Wake up main thread to execute next command */ + queue_work(lbtf_wq, &priv->cmd_work); + return ERR_PTR(-ENOBUFS); + } + + cmdnode->callback = callback; + cmdnode->callback_arg = callback_arg; + + /* Copy the incoming command to the buffer */ + memcpy(cmdnode->cmdbuf, in_cmd, in_cmd_size); + + /* Set sequence number, clean result, move to buffer */ + priv->seqnum++; + cmdnode->cmdbuf->command = cpu_to_le16(command); + cmdnode->cmdbuf->size = cpu_to_le16(in_cmd_size); + cmdnode->cmdbuf->seqnum = cpu_to_le16(priv->seqnum); + cmdnode->cmdbuf->result = 0; + cmdnode->cmdwaitqwoken = 0; + lbtf_queue_cmd(priv, cmdnode); + queue_work(lbtf_wq, &priv->cmd_work); + + return cmdnode; +} + +void lbtf_cmd_async(struct lbtf_private *priv, uint16_t command, + struct cmd_header *in_cmd, int in_cmd_size) +{ + __lbtf_cmd_async(priv, command, in_cmd, in_cmd_size, NULL, 0); +} + +int __lbtf_cmd(struct lbtf_private *priv, uint16_t command, + struct cmd_header *in_cmd, int in_cmd_size, + int (*callback)(struct lbtf_private *, + unsigned long, struct cmd_header *), + unsigned long callback_arg) +{ + struct cmd_ctrl_node *cmdnode; + unsigned long flags; + int ret = 0; + + cmdnode = __lbtf_cmd_async(priv, command, in_cmd, in_cmd_size, + callback, callback_arg); + if (IS_ERR(cmdnode)) + return PTR_ERR(cmdnode); + + might_sleep(); + ret = wait_event_interruptible(cmdnode->cmdwait_q, + cmdnode->cmdwaitqwoken); + if (ret) { + printk(KERN_DEBUG + "libertastf: command 0x%04x interrupted by signal", + command); + return ret; + } + + spin_lock_irqsave(&priv->driver_lock, flags); + ret = cmdnode->result; + if (ret) + printk(KERN_DEBUG "libertastf: command 0x%04x failed: %d\n", + command, ret); + + __lbtf_cleanup_and_insert_cmd(priv, cmdnode); + spin_unlock_irqrestore(&priv->driver_lock, flags); + + return ret; +} +EXPORT_SYMBOL_GPL(__lbtf_cmd); + +/* Call holding driver_lock */ +void lbtf_cmd_response_rx(struct lbtf_private *priv) +{ + priv->cmd_response_rxed = 1; + queue_work(lbtf_wq, &priv->cmd_work); +} +EXPORT_SYMBOL_GPL(lbtf_cmd_response_rx); + +int lbtf_process_rx_command(struct lbtf_private *priv) +{ + uint16_t respcmd, curcmd; + struct cmd_header *resp; + int ret = 0; + unsigned long flags; + uint16_t result; + + mutex_lock(&priv->lock); + spin_lock_irqsave(&priv->driver_lock, flags); + + if (!priv->cur_cmd) { + ret = -1; + spin_unlock_irqrestore(&priv->driver_lock, flags); + goto done; + } + + resp = (void *)priv->cmd_resp_buff; + curcmd = le16_to_cpu(priv->cur_cmd->cmdbuf->command); + respcmd = le16_to_cpu(resp->command); + result = le16_to_cpu(resp->result); + + if (net_ratelimit()) + printk(KERN_DEBUG "libertastf: cmd response 0x%04x, seq %d, size %d\n", + respcmd, le16_to_cpu(resp->seqnum), + le16_to_cpu(resp->size)); + + if (resp->seqnum != priv->cur_cmd->cmdbuf->seqnum) { + spin_unlock_irqrestore(&priv->driver_lock, flags); + ret = -1; + goto done; + } + if (respcmd != CMD_RET(curcmd)) { + spin_unlock_irqrestore(&priv->driver_lock, flags); + ret = -1; + goto done; + } + + if (resp->result == cpu_to_le16(0x0004)) { + /* 0x0004 means -EAGAIN. Drop the response, let it time out + and be resubmitted */ + spin_unlock_irqrestore(&priv->driver_lock, flags); + ret = -1; + goto done; + } + + /* Now we got response from FW, cancel the command timer */ + del_timer(&priv->command_timer); + priv->cmd_timed_out = 0; + if (priv->nr_retries) + priv->nr_retries = 0; + + /* If the command is not successful, cleanup and return failure */ + if ((result != 0 || !(respcmd & 0x8000))) { + /* + * Handling errors here + */ + switch (respcmd) { + case CMD_RET(CMD_GET_HW_SPEC): + case CMD_RET(CMD_802_11_RESET): + printk(KERN_DEBUG "libertastf: reset failed\n"); + break; + + } + lbtf_complete_command(priv, priv->cur_cmd, result); + spin_unlock_irqrestore(&priv->driver_lock, flags); + + ret = -1; + goto done; + } + + spin_unlock_irqrestore(&priv->driver_lock, flags); + + if (priv->cur_cmd && priv->cur_cmd->callback) { + ret = priv->cur_cmd->callback(priv, priv->cur_cmd->callback_arg, + resp); + } + spin_lock_irqsave(&priv->driver_lock, flags); + + if (priv->cur_cmd) { + /* Clean up and Put current command back to cmdfreeq */ + lbtf_complete_command(priv, priv->cur_cmd, result); + } + spin_unlock_irqrestore(&priv->driver_lock, flags); + +done: + mutex_unlock(&priv->lock); + return ret; +} diff --git a/drivers/net/wireless/libertas_tf/if_usb.c b/drivers/net/wireless/libertas_tf/if_usb.c new file mode 100644 index 00000000000..1cc03a8dd67 --- /dev/null +++ b/drivers/net/wireless/libertas_tf/if_usb.c @@ -0,0 +1,766 @@ +/* + * Copyright (C) 2008, cozybit Inc. + * Copyright (C) 2003-2006, Marvell International Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or (at + * your option) any later version. + */ +#include <linux/delay.h> +#include <linux/moduleparam.h> +#include <linux/firmware.h> +#include <linux/netdevice.h> +#include <linux/usb.h> + +#define DRV_NAME "lbtf_usb" + +#include "libertas_tf.h" +#include "if_usb.h" + +#define MESSAGE_HEADER_LEN 4 + +static char *lbtf_fw_name = "lbtf_usb.bin"; +module_param_named(fw_name, lbtf_fw_name, charp, 0644); + +static struct usb_device_id if_usb_table[] = { + /* Enter the device signature inside */ + { USB_DEVICE(0x1286, 0x2001) }, + { USB_DEVICE(0x05a3, 0x8388) }, + {} /* Terminating entry */ +}; + +MODULE_DEVICE_TABLE(usb, if_usb_table); + +static void if_usb_receive(struct urb *urb); +static void if_usb_receive_fwload(struct urb *urb); +static int if_usb_prog_firmware(struct if_usb_card *cardp); +static int if_usb_host_to_card(struct lbtf_private *priv, uint8_t type, + uint8_t *payload, uint16_t nb); +static int usb_tx_block(struct if_usb_card *cardp, uint8_t *payload, + uint16_t nb, u8 data); +static void if_usb_free(struct if_usb_card *cardp); +static int if_usb_submit_rx_urb(struct if_usb_card *cardp); +static int if_usb_reset_device(struct if_usb_card *cardp); + +/** + * if_usb_wrike_bulk_callback - call back to handle URB status + * + * @param urb pointer to urb structure + */ +static void if_usb_write_bulk_callback(struct urb *urb) +{ + if (urb->status != 0) + printk(KERN_INFO "libertastf: URB in failure status: %d\n", + urb->status); +} + +/** + * if_usb_free - free tx/rx urb, skb and rx buffer + * + * @param cardp pointer if_usb_card + */ +static void if_usb_free(struct if_usb_card *cardp) +{ + /* Unlink tx & rx urb */ + usb_kill_urb(cardp->tx_urb); + usb_kill_urb(cardp->rx_urb); + usb_kill_urb(cardp->cmd_urb); + + usb_free_urb(cardp->tx_urb); + cardp->tx_urb = NULL; + + usb_free_urb(cardp->rx_urb); + cardp->rx_urb = NULL; + + usb_free_urb(cardp->cmd_urb); + cardp->cmd_urb = NULL; + + kfree(cardp->ep_out_buf); + cardp->ep_out_buf = NULL; +} + +static void if_usb_setup_firmware(struct lbtf_private *priv) +{ + struct if_usb_card *cardp = priv->card; + struct cmd_ds_set_boot2_ver b2_cmd; + + if_usb_submit_rx_urb(cardp); + b2_cmd.hdr.size = cpu_to_le16(sizeof(b2_cmd)); + b2_cmd.action = 0; + b2_cmd.version = cardp->boot2_version; + + if (lbtf_cmd_with_response(priv, CMD_SET_BOOT2_VER, &b2_cmd)) + printk(KERN_INFO "libertastf: setting boot2 version failed\n"); +} + +static void if_usb_fw_timeo(unsigned long priv) +{ + struct if_usb_card *cardp = (void *)priv; + + if (!cardp->fwdnldover) + /* Download timed out */ + cardp->priv->surpriseremoved = 1; + wake_up(&cardp->fw_wq); +} + +/** + * if_usb_probe - sets the configuration values + * + * @ifnum interface number + * @id pointer to usb_device_id + * + * Returns: 0 on success, error code on failure + */ +static int if_usb_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + struct usb_device *udev; + struct usb_host_interface *iface_desc; + struct usb_endpoint_descriptor *endpoint; + struct lbtf_private *priv; + struct if_usb_card *cardp; + int i; + + udev = interface_to_usbdev(intf); + + cardp = kzalloc(sizeof(struct if_usb_card), GFP_KERNEL); + if (!cardp) + goto error; + + setup_timer(&cardp->fw_timeout, if_usb_fw_timeo, (unsigned long)cardp); + init_waitqueue_head(&cardp->fw_wq); + + cardp->udev = udev; + iface_desc = intf->cur_altsetting; + + for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) { + endpoint = &iface_desc->endpoint[i].desc; + if (usb_endpoint_is_bulk_in(endpoint)) { + cardp->ep_in_size = + le16_to_cpu(endpoint->wMaxPacketSize); + cardp->ep_in = usb_endpoint_num(endpoint); + } else if (usb_endpoint_is_bulk_out(endpoint)) { + cardp->ep_out_size = + le16_to_cpu(endpoint->wMaxPacketSize); + cardp->ep_out = usb_endpoint_num(endpoint); + } + } + if (!cardp->ep_out_size || !cardp->ep_in_size) + /* Endpoints not found */ + goto dealloc; + + cardp->rx_urb = usb_alloc_urb(0, GFP_KERNEL); + if (!cardp->rx_urb) + goto dealloc; + + cardp->tx_urb = usb_alloc_urb(0, GFP_KERNEL); + if (!cardp->tx_urb) + goto dealloc; + + cardp->cmd_urb = usb_alloc_urb(0, GFP_KERNEL); + if (!cardp->cmd_urb) + goto dealloc; + + cardp->ep_out_buf = kmalloc(MRVDRV_ETH_TX_PACKET_BUFFER_SIZE, + GFP_KERNEL); + if (!cardp->ep_out_buf) + goto dealloc; + + priv = lbtf_add_card(cardp, &udev->dev); + if (!priv) + goto dealloc; + + cardp->priv = priv; + + priv->hw_host_to_card = if_usb_host_to_card; + priv->hw_prog_firmware = if_usb_prog_firmware; + priv->hw_reset_device = if_usb_reset_device; + cardp->boot2_version = udev->descriptor.bcdDevice; + + usb_get_dev(udev); + usb_set_intfdata(intf, cardp); + + return 0; + +dealloc: + if_usb_free(cardp); +error: + return -ENOMEM; +} + +/** + * if_usb_disconnect - free resource and cleanup + * + * @intf USB interface structure + */ +static void if_usb_disconnect(struct usb_interface *intf) +{ + struct if_usb_card *cardp = usb_get_intfdata(intf); + struct lbtf_private *priv = (struct lbtf_private *) cardp->priv; + + if_usb_reset_device(cardp); + + if (priv) + lbtf_remove_card(priv); + + /* Unlink and free urb */ + if_usb_free(cardp); + + usb_set_intfdata(intf, NULL); + usb_put_dev(interface_to_usbdev(intf)); +} + +/** + * if_usb_send_fw_pkt - This function downloads the FW + * + * @priv pointer to struct lbtf_private + * + * Returns: 0 + */ +static int if_usb_send_fw_pkt(struct if_usb_card *cardp) +{ + struct fwdata *fwdata = cardp->ep_out_buf; + u8 *firmware = (u8 *) cardp->fw->data; + + /* If we got a CRC failure on the last block, back + up and retry it */ + if (!cardp->CRC_OK) { + cardp->totalbytes = cardp->fwlastblksent; + cardp->fwseqnum--; + } + + /* struct fwdata (which we sent to the card) has an + extra __le32 field in between the header and the data, + which is not in the struct fwheader in the actual + firmware binary. Insert the seqnum in the middle... */ + memcpy(&fwdata->hdr, &firmware[cardp->totalbytes], + sizeof(struct fwheader)); + + cardp->fwlastblksent = cardp->totalbytes; + cardp->totalbytes += sizeof(struct fwheader); + + memcpy(fwdata->data, &firmware[cardp->totalbytes], + le32_to_cpu(fwdata->hdr.datalength)); + + fwdata->seqnum = cpu_to_le32(++cardp->fwseqnum); + cardp->totalbytes += le32_to_cpu(fwdata->hdr.datalength); + + usb_tx_block(cardp, cardp->ep_out_buf, sizeof(struct fwdata) + + le32_to_cpu(fwdata->hdr.datalength), 0); + + if (fwdata->hdr.dnldcmd == cpu_to_le32(FW_HAS_LAST_BLOCK)) + /* Host has finished FW downloading + * Donwloading FW JUMP BLOCK + */ + cardp->fwfinalblk = 1; + + return 0; +} + +static int if_usb_reset_device(struct if_usb_card *cardp) +{ + struct cmd_ds_802_11_reset *cmd = cardp->ep_out_buf + 4; + int ret; + + *(__le32 *)cardp->ep_out_buf = cpu_to_le32(CMD_TYPE_REQUEST); + + cmd->hdr.command = cpu_to_le16(CMD_802_11_RESET); + cmd->hdr.size = cpu_to_le16(sizeof(struct cmd_ds_802_11_reset)); + cmd->hdr.result = cpu_to_le16(0); + cmd->hdr.seqnum = cpu_to_le16(0x5a5a); + cmd->action = cpu_to_le16(CMD_ACT_HALT); + usb_tx_block(cardp, cardp->ep_out_buf, + 4 + sizeof(struct cmd_ds_802_11_reset), 0); + + msleep(100); + ret = usb_reset_device(cardp->udev); + msleep(100); + + return ret; +} +EXPORT_SYMBOL_GPL(if_usb_reset_device); + +/** + * usb_tx_block - transfer data to the device + * + * @priv pointer to struct lbtf_private + * @payload pointer to payload data + * @nb data length + * @data non-zero for data, zero for commands + * + * Returns: 0 on success, nonzero otherwise. + */ +static int usb_tx_block(struct if_usb_card *cardp, uint8_t *payload, + uint16_t nb, u8 data) +{ + struct urb *urb; + + /* check if device is removed */ + if (cardp->priv->surpriseremoved) + return -1; + + if (data) + urb = cardp->tx_urb; + else + urb = cardp->cmd_urb; + + usb_fill_bulk_urb(urb, cardp->udev, + usb_sndbulkpipe(cardp->udev, + cardp->ep_out), + payload, nb, if_usb_write_bulk_callback, cardp); + + urb->transfer_flags |= URB_ZERO_PACKET; + + if (usb_submit_urb(urb, GFP_ATOMIC)) + return -1; + return 0; +} + +static int __if_usb_submit_rx_urb(struct if_usb_card *cardp, + void (*callbackfn)(struct urb *urb)) +{ + struct sk_buff *skb; + + skb = dev_alloc_skb(MRVDRV_ETH_RX_PACKET_BUFFER_SIZE); + if (!skb) + return -1; + + cardp->rx_skb = skb; + + /* Fill the receive configuration URB and initialise the Rx call back */ + usb_fill_bulk_urb(cardp->rx_urb, cardp->udev, + usb_rcvbulkpipe(cardp->udev, cardp->ep_in), + (void *) (skb->tail), + MRVDRV_ETH_RX_PACKET_BUFFER_SIZE, callbackfn, cardp); + + cardp->rx_urb->transfer_flags |= URB_ZERO_PACKET; + + if (usb_submit_urb(cardp->rx_urb, GFP_ATOMIC)) { + kfree_skb(skb); + cardp->rx_skb = NULL; + return -1; + } else + return 0; +} + +static int if_usb_submit_rx_urb_fwload(struct if_usb_card *cardp) +{ + return __if_usb_submit_rx_urb(cardp, &if_usb_receive_fwload); +} + +static int if_usb_submit_rx_urb(struct if_usb_card *cardp) +{ + return __if_usb_submit_rx_urb(cardp, &if_usb_receive); +} + +static void if_usb_receive_fwload(struct urb *urb) +{ + struct if_usb_card *cardp = urb->context; + struct sk_buff *skb = cardp->rx_skb; + struct fwsyncheader *syncfwheader; + struct bootcmdresp bcmdresp; + + if (urb->status) { + kfree_skb(skb); + return; + } + + if (cardp->fwdnldover) { + __le32 *tmp = (__le32 *)(skb->data); + + if (tmp[0] == cpu_to_le32(CMD_TYPE_INDICATION) && + tmp[1] == cpu_to_le32(MACREG_INT_CODE_FIRMWARE_READY)) + /* Firmware ready event received */ + wake_up(&cardp->fw_wq); + else + if_usb_submit_rx_urb_fwload(cardp); + kfree_skb(skb); + return; + } + if (cardp->bootcmdresp <= 0) { + memcpy(&bcmdresp, skb->data, sizeof(bcmdresp)); + + if (le16_to_cpu(cardp->udev->descriptor.bcdDevice) < 0x3106) { + kfree_skb(skb); + if_usb_submit_rx_urb_fwload(cardp); + cardp->bootcmdresp = 1; + /* Received valid boot command response */ + return; + } + if (bcmdresp.magic != cpu_to_le32(BOOT_CMD_MAGIC_NUMBER)) { + if (bcmdresp.magic == cpu_to_le32(CMD_TYPE_REQUEST) || + bcmdresp.magic == cpu_to_le32(CMD_TYPE_DATA) || + bcmdresp.magic == cpu_to_le32(CMD_TYPE_INDICATION)) + cardp->bootcmdresp = -1; + } else if (bcmdresp.cmd == BOOT_CMD_FW_BY_USB && + bcmdresp.result == BOOT_CMD_RESP_OK) + cardp->bootcmdresp = 1; + + kfree_skb(skb); + if_usb_submit_rx_urb_fwload(cardp); + return; + } + + syncfwheader = kmalloc(sizeof(struct fwsyncheader), GFP_ATOMIC); + if (!syncfwheader) { + kfree_skb(skb); + return; + } + + memcpy(syncfwheader, skb->data, sizeof(struct fwsyncheader)); + + if (!syncfwheader->cmd) + cardp->CRC_OK = 1; + else + cardp->CRC_OK = 0; + kfree_skb(skb); + + /* reschedule timer for 200ms hence */ + mod_timer(&cardp->fw_timeout, jiffies + (HZ/5)); + + if (cardp->fwfinalblk) { + cardp->fwdnldover = 1; + goto exit; + } + + if_usb_send_fw_pkt(cardp); + + exit: + if_usb_submit_rx_urb_fwload(cardp); + + kfree(syncfwheader); + + return; +} + +#define MRVDRV_MIN_PKT_LEN 30 + +static inline void process_cmdtypedata(int recvlength, struct sk_buff *skb, + struct if_usb_card *cardp, + struct lbtf_private *priv) +{ + if (recvlength > MRVDRV_ETH_RX_PACKET_BUFFER_SIZE + MESSAGE_HEADER_LEN + || recvlength < MRVDRV_MIN_PKT_LEN) { + kfree_skb(skb); + return; + } + + skb_put(skb, recvlength); + skb_pull(skb, MESSAGE_HEADER_LEN); + lbtf_rx(priv, skb); +} + +static inline void process_cmdrequest(int recvlength, uint8_t *recvbuff, + struct sk_buff *skb, + struct if_usb_card *cardp, + struct lbtf_private *priv) +{ + if (recvlength > LBS_CMD_BUFFER_SIZE) { + kfree_skb(skb); + return; + } + + if (!in_interrupt()) + BUG(); + + spin_lock(&priv->driver_lock); + memcpy(priv->cmd_resp_buff, recvbuff + MESSAGE_HEADER_LEN, + recvlength - MESSAGE_HEADER_LEN); + kfree_skb(skb); + lbtf_cmd_response_rx(priv); + spin_unlock(&priv->driver_lock); +} + +/** + * if_usb_receive - read data received from the device. + * + * @urb pointer to struct urb + */ +static void if_usb_receive(struct urb *urb) +{ + struct if_usb_card *cardp = urb->context; + struct sk_buff *skb = cardp->rx_skb; + struct lbtf_private *priv = cardp->priv; + int recvlength = urb->actual_length; + uint8_t *recvbuff = NULL; + uint32_t recvtype = 0; + __le32 *pkt = (__le32 *) skb->data; + + if (recvlength) { + if (urb->status) { + kfree_skb(skb); + goto setup_for_next; + } + + recvbuff = skb->data; + recvtype = le32_to_cpu(pkt[0]); + } else if (urb->status) { + kfree_skb(skb); + return; + } + + switch (recvtype) { + case CMD_TYPE_DATA: + process_cmdtypedata(recvlength, skb, cardp, priv); + break; + + case CMD_TYPE_REQUEST: + process_cmdrequest(recvlength, recvbuff, skb, cardp, priv); + break; + + case CMD_TYPE_INDICATION: + { + /* Event cause handling */ + u32 event_cause = le32_to_cpu(pkt[1]); + + /* Icky undocumented magic special case */ + if (event_cause & 0xffff0000) { + u16 tmp; + u8 retrycnt; + u8 failure; + + tmp = event_cause >> 16; + retrycnt = tmp & 0x00ff; + failure = (tmp & 0xff00) >> 8; + lbtf_send_tx_feedback(priv, retrycnt, failure); + } else if (event_cause == LBTF_EVENT_BCN_SENT) + lbtf_bcn_sent(priv); + else + printk(KERN_DEBUG + "Unsupported notification %d received\n", + event_cause); + kfree_skb(skb); + break; + } + default: + printk(KERN_DEBUG "libertastf: unknown command type 0x%X\n", + recvtype); + kfree_skb(skb); + break; + } + +setup_for_next: + if_usb_submit_rx_urb(cardp); +} + +/** + * if_usb_host_to_card - Download data to the device + * + * @priv pointer to struct lbtf_private structure + * @type type of data + * @buf pointer to data buffer + * @len number of bytes + * + * Returns: 0 on success, nonzero otherwise + */ +static int if_usb_host_to_card(struct lbtf_private *priv, uint8_t type, + uint8_t *payload, uint16_t nb) +{ + struct if_usb_card *cardp = priv->card; + u8 data = 0; + + if (type == MVMS_CMD) { + *(__le32 *)cardp->ep_out_buf = cpu_to_le32(CMD_TYPE_REQUEST); + } else { + *(__le32 *)cardp->ep_out_buf = cpu_to_le32(CMD_TYPE_DATA); + data = 1; + } + + memcpy((cardp->ep_out_buf + MESSAGE_HEADER_LEN), payload, nb); + + return usb_tx_block(cardp, cardp->ep_out_buf, nb + MESSAGE_HEADER_LEN, + data); +} + +/** + * if_usb_issue_boot_command - Issue boot command to Boot2. + * + * @ivalue 1 boots from FW by USB-Download, 2 boots from FW in EEPROM. + * + * Returns: 0 + */ +static int if_usb_issue_boot_command(struct if_usb_card *cardp, int ivalue) +{ + struct bootcmd *bootcmd = cardp->ep_out_buf; + + /* Prepare command */ + bootcmd->magic = cpu_to_le32(BOOT_CMD_MAGIC_NUMBER); + bootcmd->cmd = ivalue; + memset(bootcmd->pad, 0, sizeof(bootcmd->pad)); + + /* Issue command */ + usb_tx_block(cardp, cardp->ep_out_buf, sizeof(*bootcmd), 0); + + return 0; +} + + +/** + * check_fwfile_format - Check the validity of Boot2/FW image. + * + * @data pointer to image + * @totlen image length + * + * Returns: 0 if the image is valid, nonzero otherwise. + */ +static int check_fwfile_format(const u8 *data, u32 totlen) +{ + u32 bincmd, exit; + u32 blksize, offset, len; + int ret; + + ret = 1; + exit = len = 0; + + do { + struct fwheader *fwh = (void *) data; + + bincmd = le32_to_cpu(fwh->dnldcmd); + blksize = le32_to_cpu(fwh->datalength); + switch (bincmd) { + case FW_HAS_DATA_TO_RECV: + offset = sizeof(struct fwheader) + blksize; + data += offset; + len += offset; + if (len >= totlen) + exit = 1; + break; + case FW_HAS_LAST_BLOCK: + exit = 1; + ret = 0; + break; + default: + exit = 1; + break; + } + } while (!exit); + + if (ret) + printk(KERN_INFO + "libertastf: firmware file format check failed\n"); + return ret; +} + + +static int if_usb_prog_firmware(struct if_usb_card *cardp) +{ + int i = 0; + static int reset_count = 10; + int ret = 0; + + ret = request_firmware(&cardp->fw, lbtf_fw_name, &cardp->udev->dev); + if (ret < 0) { + printk(KERN_INFO "libertastf: firmware %s not found\n", + lbtf_fw_name); + goto done; + } + + if (check_fwfile_format(cardp->fw->data, cardp->fw->size)) + goto release_fw; + +restart: + if (if_usb_submit_rx_urb_fwload(cardp) < 0) { + ret = -1; + goto release_fw; + } + + cardp->bootcmdresp = 0; + do { + int j = 0; + i++; + /* Issue Boot command = 1, Boot from Download-FW */ + if_usb_issue_boot_command(cardp, BOOT_CMD_FW_BY_USB); + /* wait for command response */ + do { + j++; + msleep_interruptible(100); + } while (cardp->bootcmdresp == 0 && j < 10); + } while (cardp->bootcmdresp == 0 && i < 5); + + if (cardp->bootcmdresp <= 0) { + if (--reset_count >= 0) { + if_usb_reset_device(cardp); + goto restart; + } + return -1; + } + + i = 0; + + cardp->totalbytes = 0; + cardp->fwlastblksent = 0; + cardp->CRC_OK = 1; + cardp->fwdnldover = 0; + cardp->fwseqnum = -1; + cardp->totalbytes = 0; + cardp->fwfinalblk = 0; + + /* Send the first firmware packet... */ + if_usb_send_fw_pkt(cardp); + + /* ... and wait for the process to complete */ + wait_event_interruptible(cardp->fw_wq, cardp->priv->surpriseremoved || + cardp->fwdnldover); + + del_timer_sync(&cardp->fw_timeout); + usb_kill_urb(cardp->rx_urb); + + if (!cardp->fwdnldover) { + printk(KERN_INFO "libertastf: failed to load fw," + " resetting device!\n"); + if (--reset_count >= 0) { + if_usb_reset_device(cardp); + goto restart; + } + + printk(KERN_INFO "libertastf: fw download failure\n"); + ret = -1; + goto release_fw; + } + + cardp->priv->fw_ready = 1; + + release_fw: + release_firmware(cardp->fw); + cardp->fw = NULL; + + if_usb_setup_firmware(cardp->priv); + + done: + return ret; +} +EXPORT_SYMBOL_GPL(if_usb_prog_firmware); + + +#define if_usb_suspend NULL +#define if_usb_resume NULL + +static struct usb_driver if_usb_driver = { + .name = DRV_NAME, + .probe = if_usb_probe, + .disconnect = if_usb_disconnect, + .id_table = if_usb_table, + .suspend = if_usb_suspend, + .resume = if_usb_resume, +}; + +static int __init if_usb_init_module(void) +{ + int ret = 0; + + ret = usb_register(&if_usb_driver); + return ret; +} + +static void __exit if_usb_exit_module(void) +{ + usb_deregister(&if_usb_driver); +} + +module_init(if_usb_init_module); +module_exit(if_usb_exit_module); + +MODULE_DESCRIPTION("8388 USB WLAN Thinfirm Driver"); +MODULE_AUTHOR("Cozybit Inc."); +MODULE_LICENSE("GPL"); diff --git a/drivers/net/wireless/libertas_tf/if_usb.h b/drivers/net/wireless/libertas_tf/if_usb.h new file mode 100644 index 00000000000..6fa5b3f59ef --- /dev/null +++ b/drivers/net/wireless/libertas_tf/if_usb.h @@ -0,0 +1,98 @@ +/* + * Copyright (C) 2008, cozybit Inc. + * Copyright (C) 2003-2006, Marvell International Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or (at + * your option) any later version. + */ +#include <linux/wait.h> +#include <linux/timer.h> + +struct lbtf_private; + +/** + * This file contains definition for USB interface. + */ +#define CMD_TYPE_REQUEST 0xF00DFACE +#define CMD_TYPE_DATA 0xBEADC0DE +#define CMD_TYPE_INDICATION 0xBEEFFACE + +#define BOOT_CMD_FW_BY_USB 0x01 +#define BOOT_CMD_FW_IN_EEPROM 0x02 +#define BOOT_CMD_UPDATE_BOOT2 0x03 +#define BOOT_CMD_UPDATE_FW 0x04 +#define BOOT_CMD_MAGIC_NUMBER 0x4C56524D /* LVRM */ + +struct bootcmd { + __le32 magic; + uint8_t cmd; + uint8_t pad[11]; +}; + +#define BOOT_CMD_RESP_OK 0x0001 +#define BOOT_CMD_RESP_FAIL 0x0000 + +struct bootcmdresp { + __le32 magic; + uint8_t cmd; + uint8_t result; + uint8_t pad[2]; +}; + +/** USB card description structure*/ +struct if_usb_card { + struct usb_device *udev; + struct urb *rx_urb, *tx_urb, *cmd_urb; + struct lbtf_private *priv; + + struct sk_buff *rx_skb; + + uint8_t ep_in; + uint8_t ep_out; + + int8_t bootcmdresp; + + int ep_in_size; + + void *ep_out_buf; + int ep_out_size; + + const struct firmware *fw; + struct timer_list fw_timeout; + wait_queue_head_t fw_wq; + uint32_t fwseqnum; + uint32_t totalbytes; + uint32_t fwlastblksent; + uint8_t CRC_OK; + uint8_t fwdnldover; + uint8_t fwfinalblk; + + __le16 boot2_version; +}; + +/** fwheader */ +struct fwheader { + __le32 dnldcmd; + __le32 baseaddr; + __le32 datalength; + __le32 CRC; +}; + +#define FW_MAX_DATA_BLK_SIZE 600 +/** FWData */ +struct fwdata { + struct fwheader hdr; + __le32 seqnum; + uint8_t data[0]; +}; + +/** fwsyncheader */ +struct fwsyncheader { + __le32 cmd; + __le32 seqnum; +}; + +#define FW_HAS_DATA_TO_RECV 0x00000001 +#define FW_HAS_LAST_BLOCK 0x00000004 diff --git a/drivers/net/wireless/libertas_tf/libertas_tf.h b/drivers/net/wireless/libertas_tf/libertas_tf.h new file mode 100644 index 00000000000..8995cd7c29b --- /dev/null +++ b/drivers/net/wireless/libertas_tf/libertas_tf.h @@ -0,0 +1,514 @@ +/* + * Copyright (C) 2008, cozybit Inc. + * Copyright (C) 2007, Red Hat, Inc. + * Copyright (C) 2003-2006, Marvell International Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or (at + * your option) any later version. + */ +#include <linux/spinlock.h> +#include <linux/device.h> +#include <linux/kthread.h> +#include <net/mac80211.h> + +#ifndef DRV_NAME +#define DRV_NAME "libertas_tf" +#endif + +#define MRVL_DEFAULT_RETRIES 9 +#define MRVL_PER_PACKET_RATE 0x10 +#define MRVL_MAX_BCN_SIZE 440 +#define CMD_OPTION_WAITFORRSP 0x0002 + +/* Return command are almost always the same as the host command, but with + * bit 15 set high. There are a few exceptions, though... + */ +#define CMD_RET(cmd) (0x8000 | cmd) + +/* Command codes */ +#define CMD_GET_HW_SPEC 0x0003 +#define CMD_802_11_RESET 0x0005 +#define CMD_MAC_MULTICAST_ADR 0x0010 +#define CMD_802_11_RADIO_CONTROL 0x001c +#define CMD_802_11_RF_CHANNEL 0x001d +#define CMD_802_11_RF_TX_POWER 0x001e +#define CMD_MAC_CONTROL 0x0028 +#define CMD_802_11_MAC_ADDRESS 0x004d +#define CMD_SET_BOOT2_VER 0x00a5 +#define CMD_802_11_BEACON_CTRL 0x00b0 +#define CMD_802_11_BEACON_SET 0x00cb +#define CMD_802_11_SET_MODE 0x00cc +#define CMD_802_11_SET_BSSID 0x00cd + +#define CMD_ACT_GET 0x0000 +#define CMD_ACT_SET 0x0001 + +/* Define action or option for CMD_802_11_RESET */ +#define CMD_ACT_HALT 0x0003 + +/* Define action or option for CMD_MAC_CONTROL */ +#define CMD_ACT_MAC_RX_ON 0x0001 +#define CMD_ACT_MAC_TX_ON 0x0002 +#define CMD_ACT_MAC_MULTICAST_ENABLE 0x0020 +#define CMD_ACT_MAC_BROADCAST_ENABLE 0x0040 +#define CMD_ACT_MAC_PROMISCUOUS_ENABLE 0x0080 +#define CMD_ACT_MAC_ALL_MULTICAST_ENABLE 0x0100 + +/* Define action or option for CMD_802_11_RADIO_CONTROL */ +#define CMD_TYPE_AUTO_PREAMBLE 0x0001 +#define CMD_TYPE_SHORT_PREAMBLE 0x0002 +#define CMD_TYPE_LONG_PREAMBLE 0x0003 + +#define TURN_ON_RF 0x01 +#define RADIO_ON 0x01 +#define RADIO_OFF 0x00 + +#define SET_AUTO_PREAMBLE 0x05 +#define SET_SHORT_PREAMBLE 0x03 +#define SET_LONG_PREAMBLE 0x01 + +/* Define action or option for CMD_802_11_RF_CHANNEL */ +#define CMD_OPT_802_11_RF_CHANNEL_GET 0x00 +#define CMD_OPT_802_11_RF_CHANNEL_SET 0x01 + +/* Codes for CMD_802_11_SET_MODE */ +enum lbtf_mode { + LBTF_PASSIVE_MODE, + LBTF_STA_MODE, + LBTF_AP_MODE, +}; + +/** Card Event definition */ +#define MACREG_INT_CODE_FIRMWARE_READY 48 +/** Buffer Constants */ + +/* The size of SQ memory PPA, DPA are 8 DWORDs, that keep the physical +* addresses of TxPD buffers. Station has only 8 TxPD available, Whereas +* driver has more local TxPDs. Each TxPD on the host memory is associated +* with a Tx control node. The driver maintains 8 RxPD descriptors for +* station firmware to store Rx packet information. +* +* Current version of MAC has a 32x6 multicast address buffer. +* +* 802.11b can have up to 14 channels, the driver keeps the +* BSSID(MAC address) of each APs or Ad hoc stations it has sensed. +*/ + +#define MRVDRV_MAX_MULTICAST_LIST_SIZE 32 +#define LBS_NUM_CMD_BUFFERS 10 +#define LBS_CMD_BUFFER_SIZE (2 * 1024) +#define MRVDRV_MAX_CHANNEL_SIZE 14 +#define MRVDRV_SNAP_HEADER_LEN 8 + +#define LBS_UPLD_SIZE 2312 +#define DEV_NAME_LEN 32 + +/** Misc constants */ +/* This section defines 802.11 specific contants */ + +#define MRVDRV_MAX_REGION_CODE 6 +/** + * the table to keep region code + */ +#define LBTF_REGDOMAIN_US 0x10 +#define LBTF_REGDOMAIN_CA 0x20 +#define LBTF_REGDOMAIN_EU 0x30 +#define LBTF_REGDOMAIN_SP 0x31 +#define LBTF_REGDOMAIN_FR 0x32 +#define LBTF_REGDOMAIN_JP 0x40 + +#define SBI_EVENT_CAUSE_SHIFT 3 + +/** RxPD status */ + +#define MRVDRV_RXPD_STATUS_OK 0x0001 + + +/* This is for firmware specific length */ +#define EXTRA_LEN 36 + +#define MRVDRV_ETH_TX_PACKET_BUFFER_SIZE \ + (ETH_FRAME_LEN + sizeof(struct txpd) + EXTRA_LEN) + +#define MRVDRV_ETH_RX_PACKET_BUFFER_SIZE \ + (ETH_FRAME_LEN + sizeof(struct rxpd) \ + + MRVDRV_SNAP_HEADER_LEN + EXTRA_LEN) + +#define CMD_F_HOSTCMD (1 << 0) +#define FW_CAPINFO_WPA (1 << 0) + +#define RF_ANTENNA_1 0x1 +#define RF_ANTENNA_2 0x2 +#define RF_ANTENNA_AUTO 0xFFFF + +#define LBTF_EVENT_BCN_SENT 55 + +/** Global Variable Declaration */ +/** mv_ms_type */ +enum mv_ms_type { + MVMS_DAT = 0, + MVMS_CMD = 1, + MVMS_TXDONE = 2, + MVMS_EVENT +}; + +extern struct workqueue_struct *lbtf_wq; + +struct lbtf_private; + +struct lbtf_offset_value { + u32 offset; + u32 value; +}; + +struct channel_range { + u8 regdomain; + u8 start; + u8 end; /* exclusive (channel must be less than end) */ +}; + +struct if_usb_card; + +/** Private structure for the MV device */ +struct lbtf_private { + void *card; + struct ieee80211_hw *hw; + + /* Command response buffer */ + u8 cmd_resp_buff[LBS_UPLD_SIZE]; + /* Download sent: + bit0 1/0=data_sent/data_tx_done, + bit1 1/0=cmd_sent/cmd_tx_done, + all other bits reserved 0 */ + struct ieee80211_vif *vif; + + struct work_struct cmd_work; + struct work_struct tx_work; + /** Hardware access */ + int (*hw_host_to_card) (struct lbtf_private *priv, u8 type, u8 *payload, u16 nb); + int (*hw_prog_firmware) (struct if_usb_card *cardp); + int (*hw_reset_device) (struct if_usb_card *cardp); + + + /** Wlan adapter data structure*/ + /** STATUS variables */ + u32 fwrelease; + u32 fwcapinfo; + /* protected with big lock */ + + struct mutex lock; + + /** command-related variables */ + u16 seqnum; + /* protected by big lock */ + + struct cmd_ctrl_node *cmd_array; + /** Current command */ + struct cmd_ctrl_node *cur_cmd; + /** command Queues */ + /** Free command buffers */ + struct list_head cmdfreeq; + /** Pending command buffers */ + struct list_head cmdpendingq; + + /** spin locks */ + spinlock_t driver_lock; + + /** Timers */ + struct timer_list command_timer; + int nr_retries; + int cmd_timed_out; + + u8 cmd_response_rxed; + + /** capability Info used in Association, start, join */ + u16 capability; + + /** MAC address information */ + u8 current_addr[ETH_ALEN]; + u8 multicastlist[MRVDRV_MAX_MULTICAST_LIST_SIZE][ETH_ALEN]; + u32 nr_of_multicastmacaddr; + int cur_freq; + + struct sk_buff *skb_to_tx; + struct sk_buff *tx_skb; + + /** NIC Operation characteristics */ + u16 mac_control; + u16 regioncode; + struct channel_range range; + + u8 radioon; + u32 preamble; + + struct ieee80211_channel channels[14]; + struct ieee80211_rate rates[12]; + struct ieee80211_supported_band band; + struct lbtf_offset_value offsetvalue; + + u8 fw_ready; + u8 surpriseremoved; + struct sk_buff_head bc_ps_buf; +}; + +/* 802.11-related definitions */ + +/* TxPD descriptor */ +struct txpd { + /* Current Tx packet status */ + __le32 tx_status; + /* Tx control */ + __le32 tx_control; + __le32 tx_packet_location; + /* Tx packet length */ + __le16 tx_packet_length; + /* First 2 byte of destination MAC address */ + u8 tx_dest_addr_high[2]; + /* Last 4 byte of destination MAC address */ + u8 tx_dest_addr_low[4]; + /* Pkt Priority */ + u8 priority; + /* Pkt Trasnit Power control */ + u8 powermgmt; + /* Time the packet has been queued in the driver (units = 2ms) */ + u8 pktdelay_2ms; + /* reserved */ + u8 reserved1; +}; + +/* RxPD Descriptor */ +struct rxpd { + /* Current Rx packet status */ + __le16 status; + + /* SNR */ + u8 snr; + + /* Tx control */ + u8 rx_control; + + /* Pkt length */ + __le16 pkt_len; + + /* Noise Floor */ + u8 nf; + + /* Rx Packet Rate */ + u8 rx_rate; + + /* Pkt addr */ + __le32 pkt_ptr; + + /* Next Rx RxPD addr */ + __le32 next_rxpd_ptr; + + /* Pkt Priority */ + u8 priority; + u8 reserved[3]; +}; + +struct cmd_header { + __le16 command; + __le16 size; + __le16 seqnum; + __le16 result; +} __attribute__ ((packed)); + +struct cmd_ctrl_node { + struct list_head list; + int result; + /* command response */ + int (*callback)(struct lbtf_private *, + unsigned long, struct cmd_header *); + unsigned long callback_arg; + /* command data */ + struct cmd_header *cmdbuf; + /* wait queue */ + u16 cmdwaitqwoken; + wait_queue_head_t cmdwait_q; +}; + +/* + * Define data structure for CMD_GET_HW_SPEC + * This structure defines the response for the GET_HW_SPEC command + */ +struct cmd_ds_get_hw_spec { + struct cmd_header hdr; + + /* HW Interface version number */ + __le16 hwifversion; + /* HW version number */ + __le16 version; + /* Max number of TxPD FW can handle */ + __le16 nr_txpd; + /* Max no of Multicast address */ + __le16 nr_mcast_adr; + /* MAC address */ + u8 permanentaddr[6]; + + /* region Code */ + __le16 regioncode; + + /* Number of antenna used */ + __le16 nr_antenna; + + /* FW release number, example 0x01030304 = 2.3.4p1 */ + __le32 fwrelease; + + /* Base Address of TxPD queue */ + __le32 wcb_base; + /* Read Pointer of RxPd queue */ + __le32 rxpd_rdptr; + + /* Write Pointer of RxPd queue */ + __le32 rxpd_wrptr; + + /*FW/HW capability */ + __le32 fwcapinfo; +} __attribute__ ((packed)); + +struct cmd_ds_mac_control { + struct cmd_header hdr; + __le16 action; + u16 reserved; +}; + +struct cmd_ds_802_11_mac_address { + struct cmd_header hdr; + + __le16 action; + uint8_t macadd[ETH_ALEN]; +}; + +struct cmd_ds_mac_multicast_addr { + struct cmd_header hdr; + + __le16 action; + __le16 nr_of_adrs; + u8 maclist[ETH_ALEN * MRVDRV_MAX_MULTICAST_LIST_SIZE]; +}; + +struct cmd_ds_set_mode { + struct cmd_header hdr; + + __le16 mode; +}; + +struct cmd_ds_set_bssid { + struct cmd_header hdr; + + u8 bssid[6]; + u8 activate; +}; + +struct cmd_ds_802_11_radio_control { + struct cmd_header hdr; + + __le16 action; + __le16 control; +}; + + +struct cmd_ds_802_11_rf_channel { + struct cmd_header hdr; + + __le16 action; + __le16 channel; + __le16 rftype; /* unused */ + __le16 reserved; /* unused */ + u8 channellist[32]; /* unused */ +}; + +struct cmd_ds_set_boot2_ver { + struct cmd_header hdr; + + __le16 action; + __le16 version; +}; + +struct cmd_ds_802_11_reset { + struct cmd_header hdr; + + __le16 action; +}; + +struct cmd_ds_802_11_beacon_control { + struct cmd_header hdr; + + __le16 action; + __le16 beacon_enable; + __le16 beacon_period; +}; + +struct cmd_ds_802_11_beacon_set { + struct cmd_header hdr; + + __le16 len; + u8 beacon[MRVL_MAX_BCN_SIZE]; +}; + +struct lbtf_private; +struct cmd_ctrl_node; + +/** Function Prototype Declaration */ +void lbtf_set_mac_control(struct lbtf_private *priv); + +int lbtf_free_cmd_buffer(struct lbtf_private *priv); + +int lbtf_allocate_cmd_buffer(struct lbtf_private *priv); +int lbtf_execute_next_command(struct lbtf_private *priv); +int lbtf_set_radio_control(struct lbtf_private *priv); +int lbtf_update_hw_spec(struct lbtf_private *priv); +int lbtf_cmd_set_mac_multicast_addr(struct lbtf_private *priv); +void lbtf_set_mode(struct lbtf_private *priv, enum lbtf_mode mode); +void lbtf_set_bssid(struct lbtf_private *priv, bool activate, u8 *bssid); +int lbtf_set_mac_address(struct lbtf_private *priv, uint8_t *mac_addr); + +int lbtf_set_channel(struct lbtf_private *priv, u8 channel); + +int lbtf_beacon_set(struct lbtf_private *priv, struct sk_buff *beacon); +int lbtf_beacon_ctrl(struct lbtf_private *priv, bool beacon_enable, + int beacon_int); + + +int lbtf_process_rx_command(struct lbtf_private *priv); +void lbtf_complete_command(struct lbtf_private *priv, struct cmd_ctrl_node *cmd, + int result); +void lbtf_cmd_response_rx(struct lbtf_private *priv); + +/* main.c */ +struct chan_freq_power *lbtf_get_region_cfp_table(u8 region, + int *cfp_no); +struct lbtf_private *lbtf_add_card(void *card, struct device *dmdev); +int lbtf_remove_card(struct lbtf_private *priv); +int lbtf_start_card(struct lbtf_private *priv); +int lbtf_rx(struct lbtf_private *priv, struct sk_buff *skb); +void lbtf_send_tx_feedback(struct lbtf_private *priv, u8 retrycnt, u8 fail); +void lbtf_bcn_sent(struct lbtf_private *priv); + +/* support functions for cmd.c */ +/* lbtf_cmd() infers the size of the buffer to copy data back into, from + the size of the target of the pointer. Since the command to be sent + may often be smaller, that size is set in cmd->size by the caller.*/ +#define lbtf_cmd(priv, cmdnr, cmd, cb, cb_arg) ({ \ + uint16_t __sz = le16_to_cpu((cmd)->hdr.size); \ + (cmd)->hdr.size = cpu_to_le16(sizeof(*(cmd))); \ + __lbtf_cmd(priv, cmdnr, &(cmd)->hdr, __sz, cb, cb_arg); \ +}) + +#define lbtf_cmd_with_response(priv, cmdnr, cmd) \ + lbtf_cmd(priv, cmdnr, cmd, lbtf_cmd_copyback, (unsigned long) (cmd)) + +void lbtf_cmd_async(struct lbtf_private *priv, uint16_t command, + struct cmd_header *in_cmd, int in_cmd_size); + +int __lbtf_cmd(struct lbtf_private *priv, uint16_t command, + struct cmd_header *in_cmd, int in_cmd_size, + int (*callback)(struct lbtf_private *, unsigned long, + struct cmd_header *), + unsigned long callback_arg); + +int lbtf_cmd_copyback(struct lbtf_private *priv, unsigned long extra, + struct cmd_header *resp); diff --git a/drivers/net/wireless/libertas_tf/main.c b/drivers/net/wireless/libertas_tf/main.c new file mode 100644 index 00000000000..c948021bff6 --- /dev/null +++ b/drivers/net/wireless/libertas_tf/main.c @@ -0,0 +1,662 @@ +/* + * Copyright (C) 2008, cozybit Inc. + * Copyright (C) 2003-2006, Marvell International Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or (at + * your option) any later version. + */ +#include "libertas_tf.h" +#include "linux/etherdevice.h" + +#define DRIVER_RELEASE_VERSION "004.p0" +/* thinfirm version: 5.132.X.pX */ +#define LBTF_FW_VER_MIN 0x05840300 +#define LBTF_FW_VER_MAX 0x0584ffff +#define QOS_CONTROL_LEN 2 + +static const char lbtf_driver_version[] = "THINFIRM-USB8388-" DRIVER_RELEASE_VERSION; +struct workqueue_struct *lbtf_wq; + +static const struct ieee80211_channel lbtf_channels[] = { + { .center_freq = 2412, .hw_value = 1 }, + { .center_freq = 2417, .hw_value = 2 }, + { .center_freq = 2422, .hw_value = 3 }, + { .center_freq = 2427, .hw_value = 4 }, + { .center_freq = 2432, .hw_value = 5 }, + { .center_freq = 2437, .hw_value = 6 }, + { .center_freq = 2442, .hw_value = 7 }, + { .center_freq = 2447, .hw_value = 8 }, + { .center_freq = 2452, .hw_value = 9 }, + { .center_freq = 2457, .hw_value = 10 }, + { .center_freq = 2462, .hw_value = 11 }, + { .center_freq = 2467, .hw_value = 12 }, + { .center_freq = 2472, .hw_value = 13 }, + { .center_freq = 2484, .hw_value = 14 }, +}; + +/* This table contains the hardware specific values for the modulation rates. */ +static const struct ieee80211_rate lbtf_rates[] = { + { .bitrate = 10, + .hw_value = 0, }, + { .bitrate = 20, + .hw_value = 1, + .flags = IEEE80211_RATE_SHORT_PREAMBLE }, + { .bitrate = 55, + .hw_value = 2, + .flags = IEEE80211_RATE_SHORT_PREAMBLE }, + { .bitrate = 110, + .hw_value = 3, + .flags = IEEE80211_RATE_SHORT_PREAMBLE }, + { .bitrate = 60, + .hw_value = 5, + .flags = 0 }, + { .bitrate = 90, + .hw_value = 6, + .flags = 0 }, + { .bitrate = 120, + .hw_value = 7, + .flags = 0 }, + { .bitrate = 180, + .hw_value = 8, + .flags = 0 }, + { .bitrate = 240, + .hw_value = 9, + .flags = 0 }, + { .bitrate = 360, + .hw_value = 10, + .flags = 0 }, + { .bitrate = 480, + .hw_value = 11, + .flags = 0 }, + { .bitrate = 540, + .hw_value = 12, + .flags = 0 }, +}; + +static void lbtf_cmd_work(struct work_struct *work) +{ + struct lbtf_private *priv = container_of(work, struct lbtf_private, + cmd_work); + spin_lock_irq(&priv->driver_lock); + /* command response? */ + if (priv->cmd_response_rxed) { + priv->cmd_response_rxed = 0; + spin_unlock_irq(&priv->driver_lock); + lbtf_process_rx_command(priv); + spin_lock_irq(&priv->driver_lock); + } + + if (priv->cmd_timed_out && priv->cur_cmd) { + struct cmd_ctrl_node *cmdnode = priv->cur_cmd; + + if (++priv->nr_retries > 10) { + lbtf_complete_command(priv, cmdnode, + -ETIMEDOUT); + priv->nr_retries = 0; + } else { + priv->cur_cmd = NULL; + + /* Stick it back at the _top_ of the pending + * queue for immediate resubmission */ + list_add(&cmdnode->list, &priv->cmdpendingq); + } + } + priv->cmd_timed_out = 0; + spin_unlock_irq(&priv->driver_lock); + + if (!priv->fw_ready) + return; + /* Execute the next command */ + if (!priv->cur_cmd) + lbtf_execute_next_command(priv); +} + +/** + * lbtf_setup_firmware: initialize firmware. + * + * @priv A pointer to struct lbtf_private structure + * + * Returns: 0 on success. + */ +static int lbtf_setup_firmware(struct lbtf_private *priv) +{ + int ret = -1; + + /* + * Read priv address from HW + */ + memset(priv->current_addr, 0xff, ETH_ALEN); + ret = lbtf_update_hw_spec(priv); + if (ret) { + ret = -1; + goto done; + } + + lbtf_set_mac_control(priv); + lbtf_set_radio_control(priv); + + ret = 0; +done: + return ret; +} + +/** + * This function handles the timeout of command sending. + * It will re-send the same command again. + */ +static void command_timer_fn(unsigned long data) +{ + struct lbtf_private *priv = (struct lbtf_private *)data; + unsigned long flags; + + spin_lock_irqsave(&priv->driver_lock, flags); + + if (!priv->cur_cmd) { + printk(KERN_DEBUG "libertastf: command timer expired; " + "no pending command\n"); + goto out; + } + + printk(KERN_DEBUG "libertas: command %x timed out\n", + le16_to_cpu(priv->cur_cmd->cmdbuf->command)); + + priv->cmd_timed_out = 1; + queue_work(lbtf_wq, &priv->cmd_work); +out: + spin_unlock_irqrestore(&priv->driver_lock, flags); +} + +static int lbtf_init_adapter(struct lbtf_private *priv) +{ + memset(priv->current_addr, 0xff, ETH_ALEN); + mutex_init(&priv->lock); + + priv->vif = NULL; + setup_timer(&priv->command_timer, command_timer_fn, + (unsigned long)priv); + + INIT_LIST_HEAD(&priv->cmdfreeq); + INIT_LIST_HEAD(&priv->cmdpendingq); + + spin_lock_init(&priv->driver_lock); + + /* Allocate the command buffers */ + if (lbtf_allocate_cmd_buffer(priv)) + return -1; + + return 0; +} + +static void lbtf_free_adapter(struct lbtf_private *priv) +{ + lbtf_free_cmd_buffer(priv); + del_timer(&priv->command_timer); +} + +static int lbtf_op_tx(struct ieee80211_hw *hw, struct sk_buff *skb) +{ + struct lbtf_private *priv = hw->priv; + + priv->skb_to_tx = skb; + queue_work(lbtf_wq, &priv->tx_work); + /* + * queue will be restarted when we receive transmission feedback if + * there are no buffered multicast frames to send + */ + ieee80211_stop_queues(priv->hw); + return 0; +} + +static void lbtf_tx_work(struct work_struct *work) +{ + struct lbtf_private *priv = container_of(work, struct lbtf_private, + tx_work); + unsigned int len; + struct ieee80211_tx_info *info; + struct txpd *txpd; + struct sk_buff *skb = NULL; + int err; + + if ((priv->vif->type == IEEE80211_IF_TYPE_AP) && + (!skb_queue_empty(&priv->bc_ps_buf))) + skb = skb_dequeue(&priv->bc_ps_buf); + else if (priv->skb_to_tx) { + skb = priv->skb_to_tx; + priv->skb_to_tx = NULL; + } else + return; + + len = skb->len; + info = IEEE80211_SKB_CB(skb); + txpd = (struct txpd *) skb_push(skb, sizeof(struct txpd)); + + if (priv->surpriseremoved) { + dev_kfree_skb_any(skb); + return; + } + + memset(txpd, 0, sizeof(struct txpd)); + /* Activate per-packet rate selection */ + txpd->tx_control |= cpu_to_le32(MRVL_PER_PACKET_RATE | + ieee80211_get_tx_rate(priv->hw, info)->hw_value); + + /* copy destination address from 802.11 header */ + memcpy(txpd->tx_dest_addr_high, skb->data + sizeof(struct txpd) + 4, + ETH_ALEN); + txpd->tx_packet_length = cpu_to_le16(len); + txpd->tx_packet_location = cpu_to_le32(sizeof(struct txpd)); + BUG_ON(priv->tx_skb); + spin_lock_irq(&priv->driver_lock); + priv->tx_skb = skb; + err = priv->hw_host_to_card(priv, MVMS_DAT, skb->data, skb->len); + spin_unlock_irq(&priv->driver_lock); + if (err) { + dev_kfree_skb_any(skb); + priv->tx_skb = NULL; + } +} + +static int lbtf_op_start(struct ieee80211_hw *hw) +{ + struct lbtf_private *priv = hw->priv; + void *card = priv->card; + int ret = -1; + + if (!priv->fw_ready) + /* Upload firmware */ + if (priv->hw_prog_firmware(card)) + goto err_prog_firmware; + + /* poke the firmware */ + priv->capability = WLAN_CAPABILITY_SHORT_PREAMBLE; + priv->radioon = RADIO_ON; + priv->mac_control = CMD_ACT_MAC_RX_ON | CMD_ACT_MAC_TX_ON; + ret = lbtf_setup_firmware(priv); + if (ret) + goto err_prog_firmware; + + if ((priv->fwrelease < LBTF_FW_VER_MIN) || + (priv->fwrelease > LBTF_FW_VER_MAX)) { + ret = -1; + goto err_prog_firmware; + } + + printk(KERN_INFO "libertastf: Marvell WLAN 802.11 thinfirm adapter\n"); + return 0; + +err_prog_firmware: + priv->hw_reset_device(card); + return ret; +} + +static void lbtf_op_stop(struct ieee80211_hw *hw) +{ + struct lbtf_private *priv = hw->priv; + unsigned long flags; + struct sk_buff *skb; + + struct cmd_ctrl_node *cmdnode; + /* Flush pending command nodes */ + spin_lock_irqsave(&priv->driver_lock, flags); + list_for_each_entry(cmdnode, &priv->cmdpendingq, list) { + cmdnode->result = -ENOENT; + cmdnode->cmdwaitqwoken = 1; + wake_up_interruptible(&cmdnode->cmdwait_q); + } + + spin_unlock_irqrestore(&priv->driver_lock, flags); + cancel_work_sync(&priv->cmd_work); + cancel_work_sync(&priv->tx_work); + while ((skb = skb_dequeue(&priv->bc_ps_buf))) + dev_kfree_skb_any(skb); + priv->radioon = RADIO_OFF; + lbtf_set_radio_control(priv); + + return; +} + +static int lbtf_op_add_interface(struct ieee80211_hw *hw, + struct ieee80211_if_init_conf *conf) +{ + struct lbtf_private *priv = hw->priv; + if (priv->vif != NULL) + return -EOPNOTSUPP; + + priv->vif = conf->vif; + switch (conf->type) { + case IEEE80211_IF_TYPE_MESH_POINT: + case IEEE80211_IF_TYPE_AP: + lbtf_set_mode(priv, LBTF_AP_MODE); + break; + case IEEE80211_IF_TYPE_STA: + lbtf_set_mode(priv, LBTF_STA_MODE); + break; + default: + priv->vif = NULL; + return -EOPNOTSUPP; + } + lbtf_set_mac_address(priv, (u8 *) conf->mac_addr); + return 0; +} + +static void lbtf_op_remove_interface(struct ieee80211_hw *hw, + struct ieee80211_if_init_conf *conf) +{ + struct lbtf_private *priv = hw->priv; + + if (priv->vif->type == IEEE80211_IF_TYPE_AP || + priv->vif->type == IEEE80211_IF_TYPE_MESH_POINT) + lbtf_beacon_ctrl(priv, 0, 0); + lbtf_set_mode(priv, LBTF_PASSIVE_MODE); + lbtf_set_bssid(priv, 0, NULL); + priv->vif = NULL; +} + +static int lbtf_op_config(struct ieee80211_hw *hw, struct ieee80211_conf *conf) +{ + struct lbtf_private *priv = hw->priv; + if (conf->channel->center_freq != priv->cur_freq) { + priv->cur_freq = conf->channel->center_freq; + lbtf_set_channel(priv, conf->channel->hw_value); + } + return 0; +} + +static int lbtf_op_config_interface(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + struct ieee80211_if_conf *conf) +{ + struct lbtf_private *priv = hw->priv; + struct sk_buff *beacon; + + switch (priv->vif->type) { + case IEEE80211_IF_TYPE_AP: + case IEEE80211_IF_TYPE_MESH_POINT: + beacon = ieee80211_beacon_get(hw, vif); + if (beacon) { + lbtf_beacon_set(priv, beacon); + kfree_skb(beacon); + lbtf_beacon_ctrl(priv, 1, hw->conf.beacon_int); + } + break; + default: + break; + } + + if (conf->bssid) { + u8 null_bssid[ETH_ALEN] = {0}; + bool activate = compare_ether_addr(conf->bssid, null_bssid); + lbtf_set_bssid(priv, activate, conf->bssid); + } + + return 0; +} + +#define SUPPORTED_FIF_FLAGS (FIF_PROMISC_IN_BSS | FIF_ALLMULTI) +static void lbtf_op_configure_filter(struct ieee80211_hw *hw, + unsigned int changed_flags, + unsigned int *new_flags, + int mc_count, struct dev_mc_list *mclist) +{ + struct lbtf_private *priv = hw->priv; + int old_mac_control = priv->mac_control; + int i; + changed_flags &= SUPPORTED_FIF_FLAGS; + *new_flags &= SUPPORTED_FIF_FLAGS; + + if (!changed_flags) + return; + + if (*new_flags & (FIF_PROMISC_IN_BSS)) + priv->mac_control |= CMD_ACT_MAC_PROMISCUOUS_ENABLE; + else + priv->mac_control &= ~CMD_ACT_MAC_PROMISCUOUS_ENABLE; + if (*new_flags & (FIF_ALLMULTI) || + mc_count > MRVDRV_MAX_MULTICAST_LIST_SIZE) { + priv->mac_control |= CMD_ACT_MAC_ALL_MULTICAST_ENABLE; + priv->mac_control &= ~CMD_ACT_MAC_MULTICAST_ENABLE; + } else if (mc_count) { + priv->mac_control |= CMD_ACT_MAC_MULTICAST_ENABLE; + priv->mac_control &= ~CMD_ACT_MAC_ALL_MULTICAST_ENABLE; + priv->nr_of_multicastmacaddr = mc_count; + for (i = 0; i < mc_count; i++) { + if (!mclist) + break; + memcpy(&priv->multicastlist[i], mclist->da_addr, + ETH_ALEN); + mclist = mclist->next; + } + lbtf_cmd_set_mac_multicast_addr(priv); + } else { + priv->mac_control &= ~(CMD_ACT_MAC_MULTICAST_ENABLE | + CMD_ACT_MAC_ALL_MULTICAST_ENABLE); + if (priv->nr_of_multicastmacaddr) { + priv->nr_of_multicastmacaddr = 0; + lbtf_cmd_set_mac_multicast_addr(priv); + } + } + + + if (priv->mac_control != old_mac_control) + lbtf_set_mac_control(priv); +} + +static void lbtf_op_bss_info_changed(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + struct ieee80211_bss_conf *bss_conf, + u32 changes) +{ + struct lbtf_private *priv = hw->priv; + + if (changes & BSS_CHANGED_ERP_PREAMBLE) { + if (bss_conf->use_short_preamble) + priv->preamble = CMD_TYPE_SHORT_PREAMBLE; + else + priv->preamble = CMD_TYPE_LONG_PREAMBLE; + lbtf_set_radio_control(priv); + } + + return; +} + +static const struct ieee80211_ops lbtf_ops = { + .tx = lbtf_op_tx, + .start = lbtf_op_start, + .stop = lbtf_op_stop, + .add_interface = lbtf_op_add_interface, + .remove_interface = lbtf_op_remove_interface, + .config = lbtf_op_config, + .config_interface = lbtf_op_config_interface, + .configure_filter = lbtf_op_configure_filter, + .bss_info_changed = lbtf_op_bss_info_changed, +}; + +int lbtf_rx(struct lbtf_private *priv, struct sk_buff *skb) +{ + struct ieee80211_rx_status stats; + struct rxpd *prxpd; + int need_padding; + unsigned int flags; + struct ieee80211_hdr *hdr; + + prxpd = (struct rxpd *) skb->data; + + stats.flag = 0; + if (!(prxpd->status & cpu_to_le16(MRVDRV_RXPD_STATUS_OK))) + stats.flag |= RX_FLAG_FAILED_FCS_CRC; + stats.freq = priv->cur_freq; + stats.band = IEEE80211_BAND_2GHZ; + stats.signal = prxpd->snr; + stats.noise = prxpd->nf; + stats.qual = prxpd->snr - prxpd->nf; + /* Marvell rate index has a hole at value 4 */ + if (prxpd->rx_rate > 4) + --prxpd->rx_rate; + stats.rate_idx = prxpd->rx_rate; + skb_pull(skb, sizeof(struct rxpd)); + + hdr = (struct ieee80211_hdr *)skb->data; + flags = le32_to_cpu(*(__le32 *)(skb->data + 4)); + + need_padding = ieee80211_is_data_qos(hdr->frame_control); + need_padding ^= ieee80211_has_a4(hdr->frame_control); + need_padding ^= ieee80211_is_data_qos(hdr->frame_control) && + (*ieee80211_get_qos_ctl(hdr) & + IEEE80211_QOS_CONTROL_A_MSDU_PRESENT); + + if (need_padding) { + memmove(skb->data + 2, skb->data, skb->len); + skb_reserve(skb, 2); + } + + ieee80211_rx_irqsafe(priv->hw, skb, &stats); + return 0; +} +EXPORT_SYMBOL_GPL(lbtf_rx); + +/** + * lbtf_add_card: Add and initialize the card, no fw upload yet. + * + * @card A pointer to card + * + * Returns: pointer to struct lbtf_priv. + */ +struct lbtf_private *lbtf_add_card(void *card, struct device *dmdev) +{ + struct ieee80211_hw *hw; + struct lbtf_private *priv = NULL; + + hw = ieee80211_alloc_hw(sizeof(struct lbtf_private), &lbtf_ops); + if (!hw) + goto done; + + priv = hw->priv; + if (lbtf_init_adapter(priv)) + goto err_init_adapter; + + priv->hw = hw; + priv->card = card; + priv->tx_skb = NULL; + + hw->queues = 1; + hw->flags = IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING; + hw->extra_tx_headroom = sizeof(struct txpd); + memcpy(priv->channels, lbtf_channels, sizeof(lbtf_channels)); + memcpy(priv->rates, lbtf_rates, sizeof(lbtf_rates)); + priv->band.n_bitrates = ARRAY_SIZE(lbtf_rates); + priv->band.bitrates = priv->rates; + priv->band.n_channels = ARRAY_SIZE(lbtf_channels); + priv->band.channels = priv->channels; + hw->wiphy->bands[IEEE80211_BAND_2GHZ] = &priv->band; + skb_queue_head_init(&priv->bc_ps_buf); + + SET_IEEE80211_DEV(hw, dmdev); + + INIT_WORK(&priv->cmd_work, lbtf_cmd_work); + INIT_WORK(&priv->tx_work, lbtf_tx_work); + if (ieee80211_register_hw(hw)) + goto err_init_adapter; + + goto done; + +err_init_adapter: + lbtf_free_adapter(priv); + ieee80211_free_hw(hw); + priv = NULL; + +done: + return priv; +} +EXPORT_SYMBOL_GPL(lbtf_add_card); + + +int lbtf_remove_card(struct lbtf_private *priv) +{ + struct ieee80211_hw *hw = priv->hw; + + priv->surpriseremoved = 1; + del_timer(&priv->command_timer); + lbtf_free_adapter(priv); + priv->hw = NULL; + ieee80211_unregister_hw(hw); + ieee80211_free_hw(hw); + + return 0; +} +EXPORT_SYMBOL_GPL(lbtf_remove_card); + +void lbtf_send_tx_feedback(struct lbtf_private *priv, u8 retrycnt, u8 fail) +{ + struct ieee80211_tx_info *info = IEEE80211_SKB_CB(priv->tx_skb); + memset(&info->status, 0, sizeof(info->status)); + /* + * Commented out, otherwise we never go beyond 1Mbit/s using mac80211 + * default pid rc algorithm. + * + * info->status.retry_count = MRVL_DEFAULT_RETRIES - retrycnt; + */ + info->status.excessive_retries = fail ? 1 : 0; + if (!(info->flags & IEEE80211_TX_CTL_NO_ACK) && !fail) + info->flags |= IEEE80211_TX_STAT_ACK; + skb_pull(priv->tx_skb, sizeof(struct txpd)); + ieee80211_tx_status_irqsafe(priv->hw, priv->tx_skb); + priv->tx_skb = NULL; + if (!priv->skb_to_tx && skb_queue_empty(&priv->bc_ps_buf)) + ieee80211_wake_queues(priv->hw); + else + queue_work(lbtf_wq, &priv->tx_work); +} +EXPORT_SYMBOL_GPL(lbtf_send_tx_feedback); + +void lbtf_bcn_sent(struct lbtf_private *priv) +{ + struct sk_buff *skb = NULL; + + if (priv->vif->type != IEEE80211_IF_TYPE_AP) + return; + + if (skb_queue_empty(&priv->bc_ps_buf)) { + bool tx_buff_bc = 0; + + while ((skb = ieee80211_get_buffered_bc(priv->hw, priv->vif))) { + skb_queue_tail(&priv->bc_ps_buf, skb); + tx_buff_bc = 1; + } + if (tx_buff_bc) { + ieee80211_stop_queues(priv->hw); + queue_work(lbtf_wq, &priv->tx_work); + } + } + + skb = ieee80211_beacon_get(priv->hw, priv->vif); + + if (skb) { + lbtf_beacon_set(priv, skb); + kfree_skb(skb); + } +} +EXPORT_SYMBOL_GPL(lbtf_bcn_sent); + +static int __init lbtf_init_module(void) +{ + lbtf_wq = create_workqueue("libertastf"); + if (lbtf_wq == NULL) { + printk(KERN_ERR "libertastf: couldn't create workqueue\n"); + return -ENOMEM; + } + return 0; +} + +static void __exit lbtf_exit_module(void) +{ + destroy_workqueue(lbtf_wq); +} + +module_init(lbtf_init_module); +module_exit(lbtf_exit_module); + +MODULE_DESCRIPTION("Libertas WLAN Thinfirm Driver Library"); +MODULE_AUTHOR("Cozybit Inc."); +MODULE_LICENSE("GPL"); diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c index 248d31a7aa3..6ba50f087f7 100644 --- a/drivers/net/wireless/mac80211_hwsim.c +++ b/drivers/net/wireless/mac80211_hwsim.c @@ -446,7 +446,11 @@ static int __init init_mac80211_hwsim(void) SET_IEEE80211_PERM_ADDR(hw, addr); hw->channel_change_time = 1; - hw->queues = 1; + hw->queues = 4; + hw->wiphy->interface_modes = + BIT(NL80211_IFTYPE_STATION) | + BIT(NL80211_IFTYPE_AP); + hw->ampdu_queues = 1; memcpy(data->channels, hwsim_channels, sizeof(hwsim_channels)); memcpy(data->rates, hwsim_rates, sizeof(hwsim_rates)); @@ -454,6 +458,19 @@ static int __init init_mac80211_hwsim(void) data->band.n_channels = ARRAY_SIZE(hwsim_channels); data->band.bitrates = data->rates; data->band.n_bitrates = ARRAY_SIZE(hwsim_rates); + data->band.ht_info.ht_supported = 1; + data->band.ht_info.cap = IEEE80211_HT_CAP_SUP_WIDTH | + IEEE80211_HT_CAP_GRN_FLD | + IEEE80211_HT_CAP_SGI_40 | + IEEE80211_HT_CAP_DSSSCCK40; + data->band.ht_info.ampdu_factor = 0x3; + data->band.ht_info.ampdu_density = 0x6; + memset(data->band.ht_info.supp_mcs_set, 0, + sizeof(data->band.ht_info.supp_mcs_set)); + data->band.ht_info.supp_mcs_set[0] = 0xff; + data->band.ht_info.supp_mcs_set[1] = 0xff; + data->band.ht_info.supp_mcs_set[12] = + IEEE80211_HT_CAP_MCS_TX_DEFINED; hw->wiphy->bands[IEEE80211_BAND_2GHZ] = &data->band; err = ieee80211_register_hw(hw); diff --git a/drivers/net/wireless/orinoco.c b/drivers/net/wireless/orinoco.c index 36c004e1560..ec0451cbb8e 100644 --- a/drivers/net/wireless/orinoco.c +++ b/drivers/net/wireless/orinoco.c @@ -79,15 +79,21 @@ #include <linux/module.h> #include <linux/kernel.h> #include <linux/init.h> +#include <linux/delay.h> #include <linux/netdevice.h> #include <linux/etherdevice.h> #include <linux/ethtool.h> +#include <linux/firmware.h> #include <linux/if_arp.h> #include <linux/wireless.h> #include <net/iw_handler.h> #include <net/ieee80211.h> +#include <linux/scatterlist.h> +#include <linux/crypto.h> + #include "hermes_rid.h" +#include "hermes_dld.h" #include "orinoco.h" /********************************************************************/ @@ -241,6 +247,74 @@ static int __orinoco_program_rids(struct net_device *dev); static void __orinoco_set_multicast_list(struct net_device *dev); /********************************************************************/ +/* Michael MIC crypto setup */ +/********************************************************************/ +#define MICHAEL_MIC_LEN 8 +static int orinoco_mic_init(struct orinoco_private *priv) +{ + priv->tx_tfm_mic = crypto_alloc_hash("michael_mic", 0, 0); + if (IS_ERR(priv->tx_tfm_mic)) { + printk(KERN_DEBUG "orinoco_mic_init: could not allocate " + "crypto API michael_mic\n"); + priv->tx_tfm_mic = NULL; + return -ENOMEM; + } + + priv->rx_tfm_mic = crypto_alloc_hash("michael_mic", 0, 0); + if (IS_ERR(priv->rx_tfm_mic)) { + printk(KERN_DEBUG "orinoco_mic_init: could not allocate " + "crypto API michael_mic\n"); + priv->rx_tfm_mic = NULL; + return -ENOMEM; + } + + return 0; +} + +static void orinoco_mic_free(struct orinoco_private *priv) +{ + if (priv->tx_tfm_mic) + crypto_free_hash(priv->tx_tfm_mic); + if (priv->rx_tfm_mic) + crypto_free_hash(priv->rx_tfm_mic); +} + +static int michael_mic(struct crypto_hash *tfm_michael, u8 *key, + u8 *da, u8 *sa, u8 priority, + u8 *data, size_t data_len, u8 *mic) +{ + struct hash_desc desc; + struct scatterlist sg[2]; + u8 hdr[ETH_HLEN + 2]; /* size of header + padding */ + + if (tfm_michael == NULL) { + printk(KERN_WARNING "michael_mic: tfm_michael == NULL\n"); + return -1; + } + + /* Copy header into buffer. We need the padding on the end zeroed */ + memcpy(&hdr[0], da, ETH_ALEN); + memcpy(&hdr[ETH_ALEN], sa, ETH_ALEN); + hdr[ETH_ALEN*2] = priority; + hdr[ETH_ALEN*2+1] = 0; + hdr[ETH_ALEN*2+2] = 0; + hdr[ETH_ALEN*2+3] = 0; + + /* Use scatter gather to MIC header and data in one go */ + sg_init_table(sg, 2); + sg_set_buf(&sg[0], hdr, sizeof(hdr)); + sg_set_buf(&sg[1], data, data_len); + + if (crypto_hash_setkey(tfm_michael, key, MIC_KEYLEN)) + return -1; + + desc.tfm = tfm_michael; + desc.flags = 0; + return crypto_hash_digest(&desc, sg, data_len + sizeof(hdr), + mic); +} + +/********************************************************************/ /* Internal helper functions */ /********************************************************************/ @@ -273,12 +347,19 @@ static inline void set_port_type(struct orinoco_private *priv) #define ORINOCO_MAX_BSS_COUNT 64 static int orinoco_bss_data_allocate(struct orinoco_private *priv) { - if (priv->bss_data) + if (priv->bss_xbss_data) return 0; - priv->bss_data = - kzalloc(ORINOCO_MAX_BSS_COUNT * sizeof(bss_element), GFP_KERNEL); - if (!priv->bss_data) { + if (priv->has_ext_scan) + priv->bss_xbss_data = kzalloc(ORINOCO_MAX_BSS_COUNT * + sizeof(struct xbss_element), + GFP_KERNEL); + else + priv->bss_xbss_data = kzalloc(ORINOCO_MAX_BSS_COUNT * + sizeof(struct bss_element), + GFP_KERNEL); + + if (!priv->bss_xbss_data) { printk(KERN_WARNING "Out of memory allocating beacons"); return -ENOMEM; } @@ -287,18 +368,319 @@ static int orinoco_bss_data_allocate(struct orinoco_private *priv) static void orinoco_bss_data_free(struct orinoco_private *priv) { - kfree(priv->bss_data); - priv->bss_data = NULL; + kfree(priv->bss_xbss_data); + priv->bss_xbss_data = NULL; } +#define PRIV_BSS ((struct bss_element *)priv->bss_xbss_data) +#define PRIV_XBSS ((struct xbss_element *)priv->bss_xbss_data) static void orinoco_bss_data_init(struct orinoco_private *priv) { int i; INIT_LIST_HEAD(&priv->bss_free_list); INIT_LIST_HEAD(&priv->bss_list); - for (i = 0; i < ORINOCO_MAX_BSS_COUNT; i++) - list_add_tail(&priv->bss_data[i].list, &priv->bss_free_list); + if (priv->has_ext_scan) + for (i = 0; i < ORINOCO_MAX_BSS_COUNT; i++) + list_add_tail(&(PRIV_XBSS[i].list), + &priv->bss_free_list); + else + for (i = 0; i < ORINOCO_MAX_BSS_COUNT; i++) + list_add_tail(&(PRIV_BSS[i].list), + &priv->bss_free_list); + +} + +static inline u8 *orinoco_get_ie(u8 *data, size_t len, + enum ieee80211_mfie eid) +{ + u8 *p = data; + while ((p + 2) < (data + len)) { + if (p[0] == eid) + return p; + p += p[1] + 2; + } + return NULL; +} + +#define WPA_OUI_TYPE "\x00\x50\xF2\x01" +#define WPA_SELECTOR_LEN 4 +static inline u8 *orinoco_get_wpa_ie(u8 *data, size_t len) +{ + u8 *p = data; + while ((p + 2 + WPA_SELECTOR_LEN) < (data + len)) { + if ((p[0] == MFIE_TYPE_GENERIC) && + (memcmp(&p[2], WPA_OUI_TYPE, WPA_SELECTOR_LEN) == 0)) + return p; + p += p[1] + 2; + } + return NULL; +} + + +/********************************************************************/ +/* Download functionality */ +/********************************************************************/ + +struct fw_info { + char *pri_fw; + char *sta_fw; + char *ap_fw; + u32 pda_addr; + u16 pda_size; +}; + +const static struct fw_info orinoco_fw[] = { + { "", "agere_sta_fw.bin", "agere_ap_fw.bin", 0x00390000, 1000 }, + { "", "prism_sta_fw.bin", "prism_ap_fw.bin", 0, 1024 }, + { "symbol_sp24t_prim_fw", "symbol_sp24t_sec_fw", "", 0x00003100, 0x100 } +}; + +/* Structure used to access fields in FW + * Make sure LE decoding macros are used + */ +struct orinoco_fw_header { + char hdr_vers[6]; /* ASCII string for header version */ + __le16 headersize; /* Total length of header */ + __le32 entry_point; /* NIC entry point */ + __le32 blocks; /* Number of blocks to program */ + __le32 block_offset; /* Offset of block data from eof header */ + __le32 pdr_offset; /* Offset to PDR data from eof header */ + __le32 pri_offset; /* Offset to primary plug data */ + __le32 compat_offset; /* Offset to compatibility data*/ + char signature[0]; /* FW signature length headersize-20 */ +} __attribute__ ((packed)); + +/* Download either STA or AP firmware into the card. */ +static int +orinoco_dl_firmware(struct orinoco_private *priv, + const struct fw_info *fw, + int ap) +{ + /* Plug Data Area (PDA) */ + __le16 pda[512] = { 0 }; + + hermes_t *hw = &priv->hw; + const struct firmware *fw_entry; + const struct orinoco_fw_header *hdr; + const unsigned char *first_block; + const unsigned char *end; + const char *firmware; + struct net_device *dev = priv->ndev; + int err; + + if (ap) + firmware = fw->ap_fw; + else + firmware = fw->sta_fw; + + printk(KERN_DEBUG "%s: Attempting to download firmware %s\n", + dev->name, firmware); + + /* Read current plug data */ + err = hermes_read_pda(hw, pda, fw->pda_addr, + min_t(u16, fw->pda_size, sizeof(pda)), 0); + printk(KERN_DEBUG "%s: Read PDA returned %d\n", dev->name, err); + if (err) + return err; + + err = request_firmware(&fw_entry, firmware, priv->dev); + if (err) { + printk(KERN_ERR "%s: Cannot find firmware %s\n", + dev->name, firmware); + return -ENOENT; + } + + hdr = (const struct orinoco_fw_header *) fw_entry->data; + + /* Enable aux port to allow programming */ + err = hermesi_program_init(hw, le32_to_cpu(hdr->entry_point)); + printk(KERN_DEBUG "%s: Program init returned %d\n", dev->name, err); + if (err != 0) + goto abort; + + /* Program data */ + first_block = (fw_entry->data + + le16_to_cpu(hdr->headersize) + + le32_to_cpu(hdr->block_offset)); + end = fw_entry->data + fw_entry->size; + + err = hermes_program(hw, first_block, end); + printk(KERN_DEBUG "%s: Program returned %d\n", dev->name, err); + if (err != 0) + goto abort; + + /* Update production data */ + first_block = (fw_entry->data + + le16_to_cpu(hdr->headersize) + + le32_to_cpu(hdr->pdr_offset)); + + err = hermes_apply_pda_with_defaults(hw, first_block, pda); + printk(KERN_DEBUG "%s: Apply PDA returned %d\n", dev->name, err); + if (err) + goto abort; + + /* Tell card we've finished */ + err = hermesi_program_end(hw); + printk(KERN_DEBUG "%s: Program end returned %d\n", dev->name, err); + if (err != 0) + goto abort; + + /* Check if we're running */ + printk(KERN_DEBUG "%s: hermes_present returned %d\n", + dev->name, hermes_present(hw)); + +abort: + release_firmware(fw_entry); + return err; +} + +/* End markers */ +#define TEXT_END 0x1A /* End of text header */ + +/* + * Process a firmware image - stop the card, load the firmware, reset + * the card and make sure it responds. For the secondary firmware take + * care of the PDA - read it and then write it on top of the firmware. + */ +static int +symbol_dl_image(struct orinoco_private *priv, const struct fw_info *fw, + const unsigned char *image, const unsigned char *end, + int secondary) +{ + hermes_t *hw = &priv->hw; + int ret; + const unsigned char *ptr; + const unsigned char *first_block; + + /* Plug Data Area (PDA) */ + __le16 pda[256]; + + /* Binary block begins after the 0x1A marker */ + ptr = image; + while (*ptr++ != TEXT_END); + first_block = ptr; + + /* Read the PDA from EEPROM */ + if (secondary) { + ret = hermes_read_pda(hw, pda, fw->pda_addr, sizeof(pda), 1); + if (ret) + return ret; + } + + /* Stop the firmware, so that it can be safely rewritten */ + if (priv->stop_fw) { + ret = priv->stop_fw(priv, 1); + if (ret) + return ret; + } + + /* Program the adapter with new firmware */ + ret = hermes_program(hw, first_block, end); + if (ret) + return ret; + + /* Write the PDA to the adapter */ + if (secondary) { + size_t len = hermes_blocks_length(first_block); + ptr = first_block + len; + ret = hermes_apply_pda(hw, ptr, pda); + if (ret) + return ret; + } + + /* Run the firmware */ + if (priv->stop_fw) { + ret = priv->stop_fw(priv, 0); + if (ret) + return ret; + } + + /* Reset hermes chip and make sure it responds */ + ret = hermes_init(hw); + + /* hermes_reset() should return 0 with the secondary firmware */ + if (secondary && ret != 0) + return -ENODEV; + + /* And this should work with any firmware */ + if (!hermes_present(hw)) + return -ENODEV; + + return 0; +} + + +/* + * Download the firmware into the card, this also does a PCMCIA soft + * reset on the card, to make sure it's in a sane state. + */ +static int +symbol_dl_firmware(struct orinoco_private *priv, + const struct fw_info *fw) +{ + struct net_device *dev = priv->ndev; + int ret; + const struct firmware *fw_entry; + + if (request_firmware(&fw_entry, fw->pri_fw, + priv->dev) != 0) { + printk(KERN_ERR "%s: Cannot find firmware: %s\n", + dev->name, fw->pri_fw); + return -ENOENT; + } + + /* Load primary firmware */ + ret = symbol_dl_image(priv, fw, fw_entry->data, + fw_entry->data + fw_entry->size, 0); + release_firmware(fw_entry); + if (ret) { + printk(KERN_ERR "%s: Primary firmware download failed\n", + dev->name); + return ret; + } + + if (request_firmware(&fw_entry, fw->sta_fw, + priv->dev) != 0) { + printk(KERN_ERR "%s: Cannot find firmware: %s\n", + dev->name, fw->sta_fw); + return -ENOENT; + } + + /* Load secondary firmware */ + ret = symbol_dl_image(priv, fw, fw_entry->data, + fw_entry->data + fw_entry->size, 1); + release_firmware(fw_entry); + if (ret) { + printk(KERN_ERR "%s: Secondary firmware download failed\n", + dev->name); + } + + return ret; +} + +static int orinoco_download(struct orinoco_private *priv) +{ + int err = 0; + /* Reload firmware */ + switch (priv->firmware_type) { + case FIRMWARE_TYPE_AGERE: + /* case FIRMWARE_TYPE_INTERSIL: */ + err = orinoco_dl_firmware(priv, + &orinoco_fw[priv->firmware_type], 0); + break; + + case FIRMWARE_TYPE_SYMBOL: + err = symbol_dl_firmware(priv, + &orinoco_fw[priv->firmware_type]); + break; + case FIRMWARE_TYPE_INTERSIL: + break; + } + /* TODO: if we fail we probably need to reinitialise + * the driver */ + + return err; } /********************************************************************/ @@ -453,8 +835,7 @@ static int orinoco_xmit(struct sk_buff *skb, struct net_device *dev) int err = 0; u16 txfid = priv->txfid; struct ethhdr *eh; - int data_off; - struct hermes_tx_descriptor desc; + int tx_control; unsigned long flags; if (! netif_running(dev)) { @@ -486,23 +867,54 @@ static int orinoco_xmit(struct sk_buff *skb, struct net_device *dev) if (skb->len < ETH_HLEN) goto drop; - eh = (struct ethhdr *)skb->data; + tx_control = HERMES_TXCTRL_TX_OK | HERMES_TXCTRL_TX_EX; - memset(&desc, 0, sizeof(desc)); - desc.tx_control = cpu_to_le16(HERMES_TXCTRL_TX_OK | HERMES_TXCTRL_TX_EX); - err = hermes_bap_pwrite(hw, USER_BAP, &desc, sizeof(desc), txfid, 0); - if (err) { - if (net_ratelimit()) - printk(KERN_ERR "%s: Error %d writing Tx descriptor " - "to BAP\n", dev->name, err); - goto busy; + if (priv->encode_alg == IW_ENCODE_ALG_TKIP) + tx_control |= (priv->tx_key << HERMES_MIC_KEY_ID_SHIFT) | + HERMES_TXCTRL_MIC; + + if (priv->has_alt_txcntl) { + /* WPA enabled firmwares have tx_cntl at the end of + * the 802.11 header. So write zeroed descriptor and + * 802.11 header at the same time + */ + char desc[HERMES_802_3_OFFSET]; + __le16 *txcntl = (__le16 *) &desc[HERMES_TXCNTL2_OFFSET]; + + memset(&desc, 0, sizeof(desc)); + + *txcntl = cpu_to_le16(tx_control); + err = hermes_bap_pwrite(hw, USER_BAP, &desc, sizeof(desc), + txfid, 0); + if (err) { + if (net_ratelimit()) + printk(KERN_ERR "%s: Error %d writing Tx " + "descriptor to BAP\n", dev->name, err); + goto busy; + } + } else { + struct hermes_tx_descriptor desc; + + memset(&desc, 0, sizeof(desc)); + + desc.tx_control = cpu_to_le16(tx_control); + err = hermes_bap_pwrite(hw, USER_BAP, &desc, sizeof(desc), + txfid, 0); + if (err) { + if (net_ratelimit()) + printk(KERN_ERR "%s: Error %d writing Tx " + "descriptor to BAP\n", dev->name, err); + goto busy; + } + + /* Clear the 802.11 header and data length fields - some + * firmwares (e.g. Lucent/Agere 8.xx) appear to get confused + * if this isn't done. */ + hermes_clear_words(hw, HERMES_DATA0, + HERMES_802_3_OFFSET - HERMES_802_11_OFFSET); } - /* Clear the 802.11 header and data length fields - some - * firmwares (e.g. Lucent/Agere 8.xx) appear to get confused - * if this isn't done. */ - hermes_clear_words(hw, HERMES_DATA0, - HERMES_802_3_OFFSET - HERMES_802_11_OFFSET); + eh = (struct ethhdr *)skb->data; /* Encapsulate Ethernet-II frames */ if (ntohs(eh->h_proto) > ETH_DATA_LEN) { /* Ethernet-II frame */ @@ -513,33 +925,65 @@ static int orinoco_xmit(struct sk_buff *skb, struct net_device *dev) /* Strip destination and source from the data */ skb_pull(skb, 2 * ETH_ALEN); - data_off = HERMES_802_2_OFFSET + sizeof(encaps_hdr); /* And move them to a separate header */ memcpy(&hdr.eth, eh, 2 * ETH_ALEN); hdr.eth.h_proto = htons(sizeof(encaps_hdr) + skb->len); memcpy(hdr.encap, encaps_hdr, sizeof(encaps_hdr)); - err = hermes_bap_pwrite(hw, USER_BAP, &hdr, sizeof(hdr), - txfid, HERMES_802_3_OFFSET); - if (err) { - if (net_ratelimit()) - printk(KERN_ERR "%s: Error %d writing packet " - "header to BAP\n", dev->name, err); - goto busy; + /* Insert the SNAP header */ + if (skb_headroom(skb) < sizeof(hdr)) { + printk(KERN_ERR + "%s: Not enough headroom for 802.2 headers %d\n", + dev->name, skb_headroom(skb)); + goto drop; } - } else { /* IEEE 802.3 frame */ - data_off = HERMES_802_3_OFFSET; + eh = (struct ethhdr *) skb_push(skb, sizeof(hdr)); + memcpy(eh, &hdr, sizeof(hdr)); } err = hermes_bap_pwrite(hw, USER_BAP, skb->data, skb->len, - txfid, data_off); + txfid, HERMES_802_3_OFFSET); if (err) { printk(KERN_ERR "%s: Error %d writing packet to BAP\n", dev->name, err); goto busy; } + /* Calculate Michael MIC */ + if (priv->encode_alg == IW_ENCODE_ALG_TKIP) { + u8 mic_buf[MICHAEL_MIC_LEN + 1]; + u8 *mic; + size_t offset; + size_t len; + + if (skb->len % 2) { + /* MIC start is on an odd boundary */ + mic_buf[0] = skb->data[skb->len - 1]; + mic = &mic_buf[1]; + offset = skb->len - 1; + len = MICHAEL_MIC_LEN + 1; + } else { + mic = &mic_buf[0]; + offset = skb->len; + len = MICHAEL_MIC_LEN; + } + + michael_mic(priv->tx_tfm_mic, + priv->tkip_key[priv->tx_key].tx_mic, + eh->h_dest, eh->h_source, 0 /* priority */, + skb->data + ETH_HLEN, skb->len - ETH_HLEN, mic); + + /* Write the MIC */ + err = hermes_bap_pwrite(hw, USER_BAP, &mic_buf[0], len, + txfid, HERMES_802_3_OFFSET + offset); + if (err) { + printk(KERN_ERR "%s: Error %d writing MIC to BAP\n", + dev->name, err); + goto busy; + } + } + /* Finally, we actually initiate the send */ netif_stop_queue(dev); @@ -554,7 +998,7 @@ static int orinoco_xmit(struct sk_buff *skb, struct net_device *dev) } dev->trans_start = jiffies; - stats->tx_bytes += data_off + skb->len; + stats->tx_bytes += HERMES_802_3_OFFSET + skb->len; goto ok; drop: @@ -834,21 +1278,48 @@ static void orinoco_rx_monitor(struct net_device *dev, u16 rxfid, stats->rx_dropped++; } +/* Get tsc from the firmware */ +static int orinoco_hw_get_tkip_iv(struct orinoco_private *priv, int key, + u8 *tsc) +{ + hermes_t *hw = &priv->hw; + int err = 0; + u8 tsc_arr[4][IW_ENCODE_SEQ_MAX_SIZE]; + + if ((key < 0) || (key > 4)) + return -EINVAL; + + err = hermes_read_ltv(hw, USER_BAP, HERMES_RID_CURRENT_TKIP_IV, + sizeof(tsc_arr), NULL, &tsc_arr); + if (!err) + memcpy(tsc, &tsc_arr[key][0], sizeof(tsc_arr[0])); + + return err; +} + static void __orinoco_ev_rx(struct net_device *dev, hermes_t *hw) { struct orinoco_private *priv = netdev_priv(dev); struct net_device_stats *stats = &priv->stats; struct iw_statistics *wstats = &priv->wstats; struct sk_buff *skb = NULL; - u16 rxfid, status, fc; + u16 rxfid, status; int length; - struct hermes_rx_descriptor desc; - struct ethhdr *hdr; + struct hermes_rx_descriptor *desc; + struct orinoco_rx_data *rx_data; int err; + desc = kmalloc(sizeof(*desc), GFP_ATOMIC); + if (!desc) { + printk(KERN_WARNING + "%s: Can't allocate space for RX descriptor\n", + dev->name); + goto update_stats; + } + rxfid = hermes_read_regn(hw, RXFID); - err = hermes_bap_pread(hw, IRQ_BAP, &desc, sizeof(desc), + err = hermes_bap_pread(hw, IRQ_BAP, desc, sizeof(*desc), rxfid, 0); if (err) { printk(KERN_ERR "%s: error %d reading Rx descriptor. " @@ -856,7 +1327,7 @@ static void __orinoco_ev_rx(struct net_device *dev, hermes_t *hw) goto update_stats; } - status = le16_to_cpu(desc.status); + status = le16_to_cpu(desc->status); if (status & HERMES_RXSTAT_BADCRC) { DEBUG(1, "%s: Bad CRC on Rx. Frame dropped.\n", @@ -867,8 +1338,8 @@ static void __orinoco_ev_rx(struct net_device *dev, hermes_t *hw) /* Handle frames in monitor mode */ if (priv->iw_mode == IW_MODE_MONITOR) { - orinoco_rx_monitor(dev, rxfid, &desc); - return; + orinoco_rx_monitor(dev, rxfid, desc); + goto out; } if (status & HERMES_RXSTAT_UNDECRYPTABLE) { @@ -878,15 +1349,14 @@ static void __orinoco_ev_rx(struct net_device *dev, hermes_t *hw) goto update_stats; } - length = le16_to_cpu(desc.data_len); - fc = le16_to_cpu(desc.frame_ctl); + length = le16_to_cpu(desc->data_len); /* Sanity checks */ if (length < 3) { /* No for even an 802.2 LLC header */ /* At least on Symbol firmware with PCF we get quite a lot of these legitimately - Poll frames with no data. */ - return; + goto out; } if (length > IEEE80211_DATA_LEN) { printk(KERN_WARNING "%s: Oversized frame received (%d bytes)\n", @@ -895,6 +1365,11 @@ static void __orinoco_ev_rx(struct net_device *dev, hermes_t *hw) goto update_stats; } + /* Payload size does not include Michael MIC. Increase payload + * size to read it together with the data. */ + if (status & HERMES_RXSTAT_MIC) + length += MICHAEL_MIC_LEN; + /* We need space for the packet data itself, plus an ethernet header, plus 2 bytes so we can align the IP header on a 32bit boundary, plus 1 byte so we can read in odd length @@ -921,6 +1396,100 @@ static void __orinoco_ev_rx(struct net_device *dev, hermes_t *hw) goto drop; } + /* Add desc and skb to rx queue */ + rx_data = kzalloc(sizeof(*rx_data), GFP_ATOMIC); + if (!rx_data) { + printk(KERN_WARNING "%s: Can't allocate RX packet\n", + dev->name); + goto drop; + } + rx_data->desc = desc; + rx_data->skb = skb; + list_add_tail(&rx_data->list, &priv->rx_list); + tasklet_schedule(&priv->rx_tasklet); + + return; + +drop: + dev_kfree_skb_irq(skb); +update_stats: + stats->rx_errors++; + stats->rx_dropped++; +out: + kfree(desc); +} + +static void orinoco_rx(struct net_device *dev, + struct hermes_rx_descriptor *desc, + struct sk_buff *skb) +{ + struct orinoco_private *priv = netdev_priv(dev); + struct net_device_stats *stats = &priv->stats; + u16 status, fc; + int length; + struct ethhdr *hdr; + + status = le16_to_cpu(desc->status); + length = le16_to_cpu(desc->data_len); + fc = le16_to_cpu(desc->frame_ctl); + + /* Calculate and check MIC */ + if (status & HERMES_RXSTAT_MIC) { + int key_id = ((status & HERMES_RXSTAT_MIC_KEY_ID) >> + HERMES_MIC_KEY_ID_SHIFT); + u8 mic[MICHAEL_MIC_LEN]; + u8 *rxmic; + u8 *src = (fc & IEEE80211_FCTL_FROMDS) ? + desc->addr3 : desc->addr2; + + /* Extract Michael MIC from payload */ + rxmic = skb->data + skb->len - MICHAEL_MIC_LEN; + + skb_trim(skb, skb->len - MICHAEL_MIC_LEN); + length -= MICHAEL_MIC_LEN; + + michael_mic(priv->rx_tfm_mic, + priv->tkip_key[key_id].rx_mic, + desc->addr1, + src, + 0, /* priority or QoS? */ + skb->data, + skb->len, + &mic[0]); + + if (memcmp(mic, rxmic, + MICHAEL_MIC_LEN)) { + union iwreq_data wrqu; + struct iw_michaelmicfailure wxmic; + DECLARE_MAC_BUF(mac); + + printk(KERN_WARNING "%s: " + "Invalid Michael MIC in data frame from %s, " + "using key %i\n", + dev->name, print_mac(mac, src), key_id); + + /* TODO: update stats */ + + /* Notify userspace */ + memset(&wxmic, 0, sizeof(wxmic)); + wxmic.flags = key_id & IW_MICFAILURE_KEY_ID; + wxmic.flags |= (desc->addr1[0] & 1) ? + IW_MICFAILURE_GROUP : IW_MICFAILURE_PAIRWISE; + wxmic.src_addr.sa_family = ARPHRD_ETHER; + memcpy(wxmic.src_addr.sa_data, src, ETH_ALEN); + + (void) orinoco_hw_get_tkip_iv(priv, key_id, + &wxmic.tsc[0]); + + memset(&wrqu, 0, sizeof(wrqu)); + wrqu.data.length = sizeof(wxmic); + wireless_send_event(dev, IWEVMICHAELMICFAILURE, &wrqu, + (char *) &wxmic); + + goto drop; + } + } + /* Handle decapsulation * In most cases, the firmware tell us about SNAP frames. * For some reason, the SNAP frames sent by LinkSys APs @@ -939,11 +1508,11 @@ static void __orinoco_ev_rx(struct net_device *dev, hermes_t *hw) hdr = (struct ethhdr *)skb_push(skb, ETH_HLEN); hdr->h_proto = htons(length); } - memcpy(hdr->h_dest, desc.addr1, ETH_ALEN); + memcpy(hdr->h_dest, desc->addr1, ETH_ALEN); if (fc & IEEE80211_FCTL_FROMDS) - memcpy(hdr->h_source, desc.addr3, ETH_ALEN); + memcpy(hdr->h_source, desc->addr3, ETH_ALEN); else - memcpy(hdr->h_source, desc.addr2, ETH_ALEN); + memcpy(hdr->h_source, desc->addr2, ETH_ALEN); dev->last_rx = jiffies; skb->protocol = eth_type_trans(skb, dev); @@ -952,7 +1521,7 @@ static void __orinoco_ev_rx(struct net_device *dev, hermes_t *hw) skb->pkt_type = PACKET_OTHERHOST; /* Process the wireless stats if needed */ - orinoco_stat_gather(dev, skb, &desc); + orinoco_stat_gather(dev, skb, desc); /* Pass the packet to the networking stack */ netif_rx(skb); @@ -961,13 +1530,33 @@ static void __orinoco_ev_rx(struct net_device *dev, hermes_t *hw) return; - drop: - dev_kfree_skb_irq(skb); - update_stats: + drop: + dev_kfree_skb(skb); stats->rx_errors++; stats->rx_dropped++; } +static void orinoco_rx_isr_tasklet(unsigned long data) +{ + struct net_device *dev = (struct net_device *) data; + struct orinoco_private *priv = netdev_priv(dev); + struct orinoco_rx_data *rx_data, *temp; + struct hermes_rx_descriptor *desc; + struct sk_buff *skb; + + /* extract desc and skb from queue */ + list_for_each_entry_safe(rx_data, temp, &priv->rx_list, list) { + desc = rx_data->desc; + skb = rx_data->skb; + list_del(&rx_data->list); + kfree(rx_data); + + orinoco_rx(dev, desc, skb); + + kfree(desc); + } +} + /********************************************************************/ /* Rx path (info frames) */ /********************************************************************/ @@ -1087,52 +1676,172 @@ static void orinoco_join_ap(struct work_struct *work) } /* Send new BSSID to userspace */ -static void orinoco_send_wevents(struct work_struct *work) +static void orinoco_send_bssid_wevent(struct orinoco_private *priv) { - struct orinoco_private *priv = - container_of(work, struct orinoco_private, wevent_work); struct net_device *dev = priv->ndev; struct hermes *hw = &priv->hw; union iwreq_data wrqu; int err; - unsigned long flags; - - if (orinoco_lock(priv, &flags) != 0) - return; err = hermes_read_ltv(hw, IRQ_BAP, HERMES_RID_CURRENTBSSID, ETH_ALEN, NULL, wrqu.ap_addr.sa_data); if (err != 0) - goto out; + return; wrqu.ap_addr.sa_family = ARPHRD_ETHER; /* Send event to user space */ wireless_send_event(dev, SIOCGIWAP, &wrqu, NULL); +} - out: - orinoco_unlock(priv, &flags); +static void orinoco_send_assocreqie_wevent(struct orinoco_private *priv) +{ + struct net_device *dev = priv->ndev; + struct hermes *hw = &priv->hw; + union iwreq_data wrqu; + int err; + u8 buf[88]; + u8 *ie; + + if (!priv->has_wpa) + return; + + err = hermes_read_ltv(hw, IRQ_BAP, HERMES_RID_CURRENT_ASSOC_REQ_INFO, + sizeof(buf), NULL, &buf); + if (err != 0) + return; + + ie = orinoco_get_wpa_ie(buf, sizeof(buf)); + if (ie) { + int rem = sizeof(buf) - (ie - &buf[0]); + wrqu.data.length = ie[1] + 2; + if (wrqu.data.length > rem) + wrqu.data.length = rem; + + if (wrqu.data.length) + /* Send event to user space */ + wireless_send_event(dev, IWEVASSOCREQIE, &wrqu, ie); + } } +static void orinoco_send_assocrespie_wevent(struct orinoco_private *priv) +{ + struct net_device *dev = priv->ndev; + struct hermes *hw = &priv->hw; + union iwreq_data wrqu; + int err; + u8 buf[88]; /* TODO: verify max size or IW_GENERIC_IE_MAX */ + u8 *ie; + + if (!priv->has_wpa) + return; + + err = hermes_read_ltv(hw, IRQ_BAP, HERMES_RID_CURRENT_ASSOC_RESP_INFO, + sizeof(buf), NULL, &buf); + if (err != 0) + return; + + ie = orinoco_get_wpa_ie(buf, sizeof(buf)); + if (ie) { + int rem = sizeof(buf) - (ie - &buf[0]); + wrqu.data.length = ie[1] + 2; + if (wrqu.data.length > rem) + wrqu.data.length = rem; + + if (wrqu.data.length) + /* Send event to user space */ + wireless_send_event(dev, IWEVASSOCRESPIE, &wrqu, ie); + } +} + +static void orinoco_send_wevents(struct work_struct *work) +{ + struct orinoco_private *priv = + container_of(work, struct orinoco_private, wevent_work); + unsigned long flags; + + if (orinoco_lock(priv, &flags) != 0) + return; + + orinoco_send_assocreqie_wevent(priv); + orinoco_send_assocrespie_wevent(priv); + orinoco_send_bssid_wevent(priv); + + orinoco_unlock(priv, &flags); +} static inline void orinoco_clear_scan_results(struct orinoco_private *priv, unsigned long scan_age) { - bss_element *bss; - bss_element *tmp_bss; - - /* Blow away current list of scan results */ - list_for_each_entry_safe(bss, tmp_bss, &priv->bss_list, list) { - if (!scan_age || - time_after(jiffies, bss->last_scanned + scan_age)) { - list_move_tail(&bss->list, &priv->bss_free_list); - /* Don't blow away ->list, just BSS data */ - memset(bss, 0, sizeof(bss->bss)); - bss->last_scanned = 0; + if (priv->has_ext_scan) { + struct xbss_element *bss; + struct xbss_element *tmp_bss; + + /* Blow away current list of scan results */ + list_for_each_entry_safe(bss, tmp_bss, &priv->bss_list, list) { + if (!scan_age || + time_after(jiffies, bss->last_scanned + scan_age)) { + list_move_tail(&bss->list, + &priv->bss_free_list); + /* Don't blow away ->list, just BSS data */ + memset(&bss->bss, 0, sizeof(bss->bss)); + bss->last_scanned = 0; + } + } + } else { + struct bss_element *bss; + struct bss_element *tmp_bss; + + /* Blow away current list of scan results */ + list_for_each_entry_safe(bss, tmp_bss, &priv->bss_list, list) { + if (!scan_age || + time_after(jiffies, bss->last_scanned + scan_age)) { + list_move_tail(&bss->list, + &priv->bss_free_list); + /* Don't blow away ->list, just BSS data */ + memset(&bss->bss, 0, sizeof(bss->bss)); + bss->last_scanned = 0; + } } } } +static void orinoco_add_ext_scan_result(struct orinoco_private *priv, + struct agere_ext_scan_info *atom) +{ + struct xbss_element *bss = NULL; + int found = 0; + + /* Try to update an existing bss first */ + list_for_each_entry(bss, &priv->bss_list, list) { + if (compare_ether_addr(bss->bss.bssid, atom->bssid)) + continue; + /* ESSID lengths */ + if (bss->bss.data[1] != atom->data[1]) + continue; + if (memcmp(&bss->bss.data[2], &atom->data[2], + atom->data[1])) + continue; + found = 1; + break; + } + + /* Grab a bss off the free list */ + if (!found && !list_empty(&priv->bss_free_list)) { + bss = list_entry(priv->bss_free_list.next, + struct xbss_element, list); + list_del(priv->bss_free_list.next); + + list_add_tail(&bss->list, &priv->bss_list); + } + + if (bss) { + /* Always update the BSS to get latest beacon info */ + memcpy(&bss->bss, atom, sizeof(bss->bss)); + bss->last_scanned = jiffies; + } +} + static int orinoco_process_scan_results(struct net_device *dev, unsigned char *buf, int len) @@ -1194,7 +1903,7 @@ static int orinoco_process_scan_results(struct net_device *dev, /* Read the entries one by one */ for (; offset + atom_len <= len; offset += atom_len) { int found = 0; - bss_element *bss = NULL; + struct bss_element *bss = NULL; /* Get next atom */ atom = (union hermes_scan_info *) (buf + offset); @@ -1216,7 +1925,7 @@ static int orinoco_process_scan_results(struct net_device *dev, /* Grab a bss off the free list */ if (!found && !list_empty(&priv->bss_free_list)) { bss = list_entry(priv->bss_free_list.next, - bss_element, list); + struct bss_element, list); list_del(priv->bss_free_list.next); list_add_tail(&bss->list, &priv->bss_list); @@ -1404,6 +2113,63 @@ static void __orinoco_ev_info(struct net_device *dev, hermes_t *hw) kfree(buf); } break; + case HERMES_INQ_CHANNELINFO: + { + struct agere_ext_scan_info *bss; + + if (!priv->scan_inprogress) { + printk(KERN_DEBUG "%s: Got chaninfo without scan, " + "len=%d\n", dev->name, len); + break; + } + + /* An empty result indicates that the scan is complete */ + if (len == 0) { + union iwreq_data wrqu; + + /* Scan is no longer in progress */ + priv->scan_inprogress = 0; + + wrqu.data.length = 0; + wrqu.data.flags = 0; + wireless_send_event(dev, SIOCGIWSCAN, &wrqu, NULL); + break; + } + + /* Sanity check */ + else if (len > sizeof(*bss)) { + printk(KERN_WARNING + "%s: Ext scan results too large (%d bytes). " + "Truncating results to %zd bytes.\n", + dev->name, len, sizeof(*bss)); + len = sizeof(*bss); + } else if (len < (offsetof(struct agere_ext_scan_info, + data) + 2)) { + /* Drop this result now so we don't have to + * keep checking later */ + printk(KERN_WARNING + "%s: Ext scan results too short (%d bytes)\n", + dev->name, len); + break; + } + + bss = kmalloc(sizeof(*bss), GFP_ATOMIC); + if (bss == NULL) + break; + + /* Read scan data */ + err = hermes_bap_pread(hw, IRQ_BAP, (void *) bss, len, + infofid, sizeof(info)); + if (err) { + kfree(bss); + break; + } + + orinoco_add_ext_scan_result(priv, bss); + + kfree(bss); + break; + } case HERMES_INQ_SEC_STAT_AGERE: /* Security status (Agere specific) */ /* Ignore this frame for now */ @@ -1586,7 +2352,7 @@ static int __orinoco_hw_set_wap(struct orinoco_private *priv) } /* Change the WEP keys and/or the current keys. Can be called - * either from __orinoco_hw_setup_wep() or directly from + * either from __orinoco_hw_setup_enc() or directly from * orinoco_ioctl_setiwencode(). In the later case the association * with the AP is not broken (if the firmware can handle it), * which is needed for 802.1x implementations. */ @@ -1646,14 +2412,16 @@ static int __orinoco_hw_setup_wepkeys(struct orinoco_private *priv) return 0; } -static int __orinoco_hw_setup_wep(struct orinoco_private *priv) +static int __orinoco_hw_setup_enc(struct orinoco_private *priv) { hermes_t *hw = &priv->hw; int err = 0; int master_wep_flag; int auth_flag; + int enc_flag; - if (priv->wep_on) + /* Setup WEP keys for WEP and WPA */ + if (priv->encode_alg) __orinoco_hw_setup_wepkeys(priv); if (priv->wep_restrict) @@ -1661,9 +2429,16 @@ static int __orinoco_hw_setup_wep(struct orinoco_private *priv) else auth_flag = HERMES_AUTH_OPEN; + if (priv->wpa_enabled) + enc_flag = 2; + else if (priv->encode_alg == IW_ENCODE_ALG_WEP) + enc_flag = 1; + else + enc_flag = 0; + switch (priv->firmware_type) { case FIRMWARE_TYPE_AGERE: /* Agere style WEP */ - if (priv->wep_on) { + if (priv->encode_alg == IW_ENCODE_ALG_WEP) { /* Enable the shared-key authentication. */ err = hermes_write_wordrec(hw, USER_BAP, HERMES_RID_CNFAUTHENTICATION_AGERE, @@ -1671,14 +2446,24 @@ static int __orinoco_hw_setup_wep(struct orinoco_private *priv) } err = hermes_write_wordrec(hw, USER_BAP, HERMES_RID_CNFWEPENABLED_AGERE, - priv->wep_on); + enc_flag); if (err) return err; + + if (priv->has_wpa) { + /* Set WPA key management */ + err = hermes_write_wordrec(hw, USER_BAP, + HERMES_RID_CNFSETWPAAUTHMGMTSUITE_AGERE, + priv->key_mgmt); + if (err) + return err; + } + break; case FIRMWARE_TYPE_INTERSIL: /* Intersil style WEP */ case FIRMWARE_TYPE_SYMBOL: /* Symbol style WEP */ - if (priv->wep_on) { + if (priv->encode_alg == IW_ENCODE_ALG_WEP) { if (priv->wep_restrict || (priv->firmware_type == FIRMWARE_TYPE_SYMBOL)) master_wep_flag = HERMES_WEP_PRIVACY_INVOKED | @@ -1710,6 +2495,84 @@ static int __orinoco_hw_setup_wep(struct orinoco_private *priv) return 0; } +/* key must be 32 bytes, including the tx and rx MIC keys. + * rsc must be 8 bytes + * tsc must be 8 bytes or NULL + */ +static int __orinoco_hw_set_tkip_key(hermes_t *hw, int key_idx, int set_tx, + u8 *key, u8 *rsc, u8 *tsc) +{ + struct { + __le16 idx; + u8 rsc[IW_ENCODE_SEQ_MAX_SIZE]; + u8 key[TKIP_KEYLEN]; + u8 tx_mic[MIC_KEYLEN]; + u8 rx_mic[MIC_KEYLEN]; + u8 tsc[IW_ENCODE_SEQ_MAX_SIZE]; + } __attribute__ ((packed)) buf; + int ret; + int err; + int k; + u16 xmitting; + + key_idx &= 0x3; + + if (set_tx) + key_idx |= 0x8000; + + buf.idx = cpu_to_le16(key_idx); + memcpy(buf.key, key, + sizeof(buf.key) + sizeof(buf.tx_mic) + sizeof(buf.rx_mic)); + + if (rsc == NULL) + memset(buf.rsc, 0, sizeof(buf.rsc)); + else + memcpy(buf.rsc, rsc, sizeof(buf.rsc)); + + if (tsc == NULL) { + memset(buf.tsc, 0, sizeof(buf.tsc)); + buf.tsc[4] = 0x10; + } else { + memcpy(buf.tsc, tsc, sizeof(buf.tsc)); + } + + /* Wait upto 100ms for tx queue to empty */ + k = 100; + do { + k--; + udelay(1000); + ret = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_TXQUEUEEMPTY, + &xmitting); + if (ret) + break; + } while ((k > 0) && xmitting); + + if (k == 0) + ret = -ETIMEDOUT; + + err = HERMES_WRITE_RECORD(hw, USER_BAP, + HERMES_RID_CNFADDDEFAULTTKIPKEY_AGERE, + &buf); + + return ret ? ret : err; +} + +static int orinoco_clear_tkip_key(struct orinoco_private *priv, + int key_idx) +{ + hermes_t *hw = &priv->hw; + int err; + + memset(&priv->tkip_key[key_idx], 0, sizeof(priv->tkip_key[key_idx])); + err = hermes_write_wordrec(hw, USER_BAP, + HERMES_RID_CNFREMDEFAULTTKIPKEY_AGERE, + key_idx); + if (err) + printk(KERN_WARNING "%s: Error %d clearing TKIP key %d\n", + priv->ndev->name, err, key_idx); + return err; +} + static int __orinoco_program_rids(struct net_device *dev) { struct orinoco_private *priv = netdev_priv(dev); @@ -1906,10 +2769,10 @@ static int __orinoco_program_rids(struct net_device *dev) } /* Set up encryption */ - if (priv->has_wep) { - err = __orinoco_hw_setup_wep(priv); + if (priv->has_wep || priv->has_wpa) { + err = __orinoco_hw_setup_enc(priv); if (err) { - printk(KERN_ERR "%s: Error %d activating WEP\n", + printk(KERN_ERR "%s: Error %d activating encryption\n", dev->name, err); return err; } @@ -2047,6 +2910,12 @@ static void orinoco_reset(struct work_struct *work) } } + if (priv->do_fw_download) { + err = orinoco_download(priv); + if (err) + priv->do_fw_download = 0; + } + err = orinoco_reinit_firmware(dev); if (err) { printk(KERN_ERR "%s: orinoco_reset: Error %d re-initializing firmware\n", @@ -2258,6 +3127,10 @@ static int determine_firmware(struct net_device *dev) priv->has_ibss = 1; priv->has_wep = 0; priv->has_big_wep = 0; + priv->has_alt_txcntl = 0; + priv->has_ext_scan = 0; + priv->has_wpa = 0; + priv->do_fw_download = 0; /* Determine capabilities from the firmware version */ switch (priv->firmware_type) { @@ -2277,8 +3150,11 @@ static int determine_firmware(struct net_device *dev) priv->has_pm = (firmver >= 0x40020); /* Don't work in 7.52 ? */ priv->ibss_port = 1; priv->has_hostscan = (firmver >= 0x8000a); + priv->do_fw_download = 1; priv->broken_monitor = (firmver >= 0x80000); - + priv->has_alt_txcntl = (firmver >= 0x90000); /* All 9.x ? */ + priv->has_ext_scan = (firmver >= 0x90000); /* All 9.x ? */ + priv->has_wpa = (firmver >= 0x9002a); /* Tested with Agere firmware : * 1.16 ; 4.08 ; 4.52 ; 6.04 ; 6.16 ; 7.28 => Jean II * Tested CableTron firmware : 4.32 => Anton */ @@ -2321,6 +3197,21 @@ static int determine_firmware(struct net_device *dev) firmver >= 0x31000; priv->has_preamble = (firmver >= 0x20000); priv->ibss_port = 4; + + /* Symbol firmware is found on various cards, but + * there has been no attempt to check firmware + * download on non-spectrum_cs based cards. + * + * Given that the Agere firmware download works + * differently, we should avoid doing a firmware + * download with the Symbol algorithm on non-spectrum + * cards. + * + * For now we can identify a spectrum_cs based card + * because it has a firmware reset function. + */ + priv->do_fw_download = (priv->stop_fw != NULL); + priv->broken_disableport = (firmver == 0x25013) || (firmver >= 0x30000 && firmver <= 0x31000); priv->has_hostscan = (firmver >= 0x31001) || @@ -2391,6 +3282,20 @@ static int orinoco_init(struct net_device *dev) goto out; } + if (priv->do_fw_download) { + err = orinoco_download(priv); + if (err) + priv->do_fw_download = 0; + + /* Check firmware version again */ + err = determine_firmware(dev); + if (err != 0) { + printk(KERN_ERR "%s: Incompatible firmware, aborting\n", + dev->name); + goto out; + } + } + if (priv->has_port3) printk(KERN_DEBUG "%s: Ad-hoc demo mode supported\n", dev->name); if (priv->has_ibss) @@ -2403,6 +3308,20 @@ static int orinoco_init(struct net_device *dev) else printk("40-bit key\n"); } + if (priv->has_wpa) { + printk(KERN_DEBUG "%s: WPA-PSK supported\n", dev->name); + if (orinoco_mic_init(priv)) { + printk(KERN_ERR "%s: Failed to setup MIC crypto " + "algorithm. Disabling WPA support\n", dev->name); + priv->has_wpa = 0; + } + } + + /* Now we have the firmware capabilities, allocate appropiate + * sized scan buffers */ + if (orinoco_bss_data_allocate(priv)) + goto out; + orinoco_bss_data_init(priv); /* Get the MAC address */ err = hermes_read_ltv(hw, USER_BAP, HERMES_RID_CNFOWNMACADDR, @@ -2518,8 +3437,13 @@ static int orinoco_init(struct net_device *dev) priv->channel = 0; /* use firmware default */ priv->promiscuous = 0; - priv->wep_on = 0; + priv->encode_alg = IW_ENCODE_ALG_NONE; priv->tx_key = 0; + priv->wpa_enabled = 0; + priv->tkip_cm_active = 0; + priv->key_mgmt = 0; + priv->wpa_ie_len = 0; + priv->wpa_ie = NULL; /* Make the hardware available, as long as it hasn't been * removed elsewhere (e.g. by PCMCIA hot unplug) */ @@ -2533,8 +3457,11 @@ static int orinoco_init(struct net_device *dev) return err; } -struct net_device *alloc_orinocodev(int sizeof_card, - int (*hard_reset)(struct orinoco_private *)) +struct net_device +*alloc_orinocodev(int sizeof_card, + struct device *device, + int (*hard_reset)(struct orinoco_private *), + int (*stop_fw)(struct orinoco_private *, int)) { struct net_device *dev; struct orinoco_private *priv; @@ -2549,10 +3476,7 @@ struct net_device *alloc_orinocodev(int sizeof_card, + sizeof(struct orinoco_private)); else priv->card = NULL; - - if (orinoco_bss_data_allocate(priv)) - goto err_out_free; - orinoco_bss_data_init(priv); + priv->dev = device; /* Setup / override net_device fields */ dev->init = orinoco_init; @@ -2570,10 +3494,14 @@ struct net_device *alloc_orinocodev(int sizeof_card, dev->set_multicast_list = orinoco_set_multicast_list; /* we use the default eth_mac_addr for setting the MAC addr */ + /* Reserve space in skb for the SNAP header */ + dev->hard_header_len += ENCAPS_OVERHEAD; + /* Set up default callbacks */ dev->open = orinoco_open; dev->stop = orinoco_stop; priv->hard_reset = hard_reset; + priv->stop_fw = stop_fw; spin_lock_init(&priv->lock); priv->open = 0; @@ -2584,20 +3512,27 @@ struct net_device *alloc_orinocodev(int sizeof_card, INIT_WORK(&priv->join_work, orinoco_join_ap); INIT_WORK(&priv->wevent_work, orinoco_send_wevents); + INIT_LIST_HEAD(&priv->rx_list); + tasklet_init(&priv->rx_tasklet, orinoco_rx_isr_tasklet, + (unsigned long) dev); + netif_carrier_off(dev); priv->last_linkstatus = 0xffff; return dev; - -err_out_free: - free_netdev(dev); - return NULL; } void free_orinocodev(struct net_device *dev) { struct orinoco_private *priv = netdev_priv(dev); + /* No need to empty priv->rx_list: if the tasklet is scheduled + * when we call tasklet_kill it will run one final time, + * emptying the list */ + tasklet_kill(&priv->rx_tasklet); + priv->wpa_ie_len = 0; + kfree(priv->wpa_ie); + orinoco_mic_free(priv); orinoco_bss_data_free(priv); free_netdev(dev); } @@ -2909,7 +3844,7 @@ static int orinoco_ioctl_getiwrange(struct net_device *dev, memset(range, 0, sizeof(struct iw_range)); range->we_version_compiled = WIRELESS_EXT; - range->we_version_source = 14; + range->we_version_source = 22; /* Set available channels/frequencies */ range->num_channels = NUM_CHANNELS; @@ -2939,6 +3874,9 @@ static int orinoco_ioctl_getiwrange(struct net_device *dev, } } + if (priv->has_wpa) + range->enc_capa = IW_ENC_CAPA_WPA | IW_ENC_CAPA_CIPHER_TKIP; + if ((priv->iw_mode == IW_MODE_ADHOC) && (!SPY_NUMBER(priv))){ /* Quality stats meaningless in ad-hoc mode */ } else { @@ -2986,6 +3924,11 @@ static int orinoco_ioctl_getiwrange(struct net_device *dev, range->min_r_time = 0; range->max_r_time = 65535 * 1000; /* ??? */ + if (priv->firmware_type == FIRMWARE_TYPE_AGERE) + range->scan_capa = IW_SCAN_CAPA_ESSID; + else + range->scan_capa = IW_SCAN_CAPA_NONE; + /* Event capability (kernel) */ IW_EVENT_CAPA_SET_KERNEL(range->event_capa); /* Event capability (driver) */ @@ -3005,7 +3948,7 @@ static int orinoco_ioctl_setiwencode(struct net_device *dev, struct orinoco_private *priv = netdev_priv(dev); int index = (erq->flags & IW_ENCODE_INDEX) - 1; int setindex = priv->tx_key; - int enable = priv->wep_on; + int encode_alg = priv->encode_alg; int restricted = priv->wep_restrict; u16 xlen = 0; int err = -EINPROGRESS; /* Call commit handler */ @@ -3026,6 +3969,10 @@ static int orinoco_ioctl_setiwencode(struct net_device *dev, if (orinoco_lock(priv, &flags) != 0) return -EBUSY; + /* Clear any TKIP key we have */ + if ((priv->has_wpa) && (priv->encode_alg == IW_ENCODE_ALG_TKIP)) + (void) orinoco_clear_tkip_key(priv, setindex); + if (erq->length > 0) { if ((index < 0) || (index >= ORINOCO_MAX_KEYS)) index = priv->tx_key; @@ -3039,9 +3986,9 @@ static int orinoco_ioctl_setiwencode(struct net_device *dev, xlen = 0; /* Switch on WEP if off */ - if ((!enable) && (xlen > 0)) { + if ((encode_alg != IW_ENCODE_ALG_WEP) && (xlen > 0)) { setindex = index; - enable = 1; + encode_alg = IW_ENCODE_ALG_WEP; } } else { /* Important note : if the user do "iwconfig eth0 enc off", @@ -3063,7 +4010,7 @@ static int orinoco_ioctl_setiwencode(struct net_device *dev, } if (erq->flags & IW_ENCODE_DISABLED) - enable = 0; + encode_alg = IW_ENCODE_ALG_NONE; if (erq->flags & IW_ENCODE_OPEN) restricted = 0; if (erq->flags & IW_ENCODE_RESTRICTED) @@ -3078,14 +4025,15 @@ static int orinoco_ioctl_setiwencode(struct net_device *dev, priv->tx_key = setindex; /* Try fast key change if connected and only keys are changed */ - if (priv->wep_on && enable && (priv->wep_restrict == restricted) && + if ((priv->encode_alg == encode_alg) && + (priv->wep_restrict == restricted) && netif_carrier_ok(dev)) { err = __orinoco_hw_setup_wepkeys(priv); /* No need to commit if successful */ goto out; } - priv->wep_on = enable; + priv->encode_alg = encode_alg; priv->wep_restrict = restricted; out: @@ -3114,7 +4062,7 @@ static int orinoco_ioctl_getiwencode(struct net_device *dev, index = priv->tx_key; erq->flags = 0; - if (! priv->wep_on) + if (!priv->encode_alg) erq->flags |= IW_ENCODE_DISABLED; erq->flags |= index + 1; @@ -3689,6 +4637,399 @@ static int orinoco_ioctl_getpower(struct net_device *dev, return err; } +static int orinoco_ioctl_set_encodeext(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, + char *extra) +{ + struct orinoco_private *priv = netdev_priv(dev); + struct iw_point *encoding = &wrqu->encoding; + struct iw_encode_ext *ext = (struct iw_encode_ext *)extra; + int idx, alg = ext->alg, set_key = 1; + unsigned long flags; + int err = -EINVAL; + u16 key_len; + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + + /* Determine and validate the key index */ + idx = encoding->flags & IW_ENCODE_INDEX; + if (idx) { + if ((idx < 1) || (idx > WEP_KEYS)) + goto out; + idx--; + } else + idx = priv->tx_key; + + if (encoding->flags & IW_ENCODE_DISABLED) + alg = IW_ENCODE_ALG_NONE; + + if (priv->has_wpa && (alg != IW_ENCODE_ALG_TKIP)) { + /* Clear any TKIP TX key we had */ + (void) orinoco_clear_tkip_key(priv, priv->tx_key); + } + + if (ext->ext_flags & IW_ENCODE_EXT_SET_TX_KEY) { + priv->tx_key = idx; + set_key = ((alg == IW_ENCODE_ALG_TKIP) || + (ext->key_len > 0)) ? 1 : 0; + } + + if (set_key) { + /* Set the requested key first */ + switch (alg) { + case IW_ENCODE_ALG_NONE: + priv->encode_alg = alg; + priv->keys[idx].len = 0; + break; + + case IW_ENCODE_ALG_WEP: + if (ext->key_len > SMALL_KEY_SIZE) + key_len = LARGE_KEY_SIZE; + else if (ext->key_len > 0) + key_len = SMALL_KEY_SIZE; + else + goto out; + + priv->encode_alg = alg; + priv->keys[idx].len = cpu_to_le16(key_len); + + key_len = min(ext->key_len, key_len); + + memset(priv->keys[idx].data, 0, ORINOCO_MAX_KEY_SIZE); + memcpy(priv->keys[idx].data, ext->key, key_len); + break; + + case IW_ENCODE_ALG_TKIP: + { + hermes_t *hw = &priv->hw; + u8 *tkip_iv = NULL; + + if (!priv->has_wpa || + (ext->key_len > sizeof(priv->tkip_key[0]))) + goto out; + + priv->encode_alg = alg; + memset(&priv->tkip_key[idx], 0, + sizeof(priv->tkip_key[idx])); + memcpy(&priv->tkip_key[idx], ext->key, ext->key_len); + + if (ext->ext_flags & IW_ENCODE_EXT_RX_SEQ_VALID) + tkip_iv = &ext->rx_seq[0]; + + err = __orinoco_hw_set_tkip_key(hw, idx, + ext->ext_flags & IW_ENCODE_EXT_SET_TX_KEY, + (u8 *) &priv->tkip_key[idx], + tkip_iv, NULL); + if (err) + printk(KERN_ERR "%s: Error %d setting TKIP key" + "\n", dev->name, err); + + goto out; + } + default: + goto out; + } + } + err = -EINPROGRESS; + out: + orinoco_unlock(priv, &flags); + + return err; +} + +static int orinoco_ioctl_get_encodeext(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, + char *extra) +{ + struct orinoco_private *priv = netdev_priv(dev); + struct iw_point *encoding = &wrqu->encoding; + struct iw_encode_ext *ext = (struct iw_encode_ext *)extra; + int idx, max_key_len; + unsigned long flags; + int err; + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + + err = -EINVAL; + max_key_len = encoding->length - sizeof(*ext); + if (max_key_len < 0) + goto out; + + idx = encoding->flags & IW_ENCODE_INDEX; + if (idx) { + if ((idx < 1) || (idx > WEP_KEYS)) + goto out; + idx--; + } else + idx = priv->tx_key; + + encoding->flags = idx + 1; + memset(ext, 0, sizeof(*ext)); + + ext->alg = priv->encode_alg; + switch (priv->encode_alg) { + case IW_ENCODE_ALG_NONE: + ext->key_len = 0; + encoding->flags |= IW_ENCODE_DISABLED; + break; + case IW_ENCODE_ALG_WEP: + ext->key_len = min(le16_to_cpu(priv->keys[idx].len), + (u16) max_key_len); + memcpy(ext->key, priv->keys[idx].data, ext->key_len); + encoding->flags |= IW_ENCODE_ENABLED; + break; + case IW_ENCODE_ALG_TKIP: + ext->key_len = min((u16) sizeof(struct orinoco_tkip_key), + (u16) max_key_len); + memcpy(ext->key, &priv->tkip_key[idx], ext->key_len); + encoding->flags |= IW_ENCODE_ENABLED; + break; + } + + err = 0; + out: + orinoco_unlock(priv, &flags); + + return err; +} + +static int orinoco_ioctl_set_auth(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + struct orinoco_private *priv = netdev_priv(dev); + hermes_t *hw = &priv->hw; + struct iw_param *param = &wrqu->param; + unsigned long flags; + int ret = -EINPROGRESS; + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + + switch (param->flags & IW_AUTH_INDEX) { + case IW_AUTH_WPA_VERSION: + case IW_AUTH_CIPHER_PAIRWISE: + case IW_AUTH_CIPHER_GROUP: + case IW_AUTH_RX_UNENCRYPTED_EAPOL: + case IW_AUTH_PRIVACY_INVOKED: + case IW_AUTH_DROP_UNENCRYPTED: + /* + * orinoco does not use these parameters + */ + break; + + case IW_AUTH_KEY_MGMT: + /* wl_lkm implies value 2 == PSK for Hermes I + * which ties in with WEXT + * no other hints tho :( + */ + priv->key_mgmt = param->value; + break; + + case IW_AUTH_TKIP_COUNTERMEASURES: + /* When countermeasures are enabled, shut down the + * card; when disabled, re-enable the card. This must + * take effect immediately. + * + * TODO: Make sure that the EAPOL message is getting + * out before card disabled + */ + if (param->value) { + priv->tkip_cm_active = 1; + ret = hermes_enable_port(hw, 0); + } else { + priv->tkip_cm_active = 0; + ret = hermes_disable_port(hw, 0); + } + break; + + case IW_AUTH_80211_AUTH_ALG: + if (param->value & IW_AUTH_ALG_SHARED_KEY) + priv->wep_restrict = 1; + else if (param->value & IW_AUTH_ALG_OPEN_SYSTEM) + priv->wep_restrict = 0; + else + ret = -EINVAL; + break; + + case IW_AUTH_WPA_ENABLED: + if (priv->has_wpa) { + priv->wpa_enabled = param->value ? 1 : 0; + } else { + if (param->value) + ret = -EOPNOTSUPP; + /* else silently accept disable of WPA */ + priv->wpa_enabled = 0; + } + break; + + default: + ret = -EOPNOTSUPP; + } + + orinoco_unlock(priv, &flags); + return ret; +} + +static int orinoco_ioctl_get_auth(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + struct orinoco_private *priv = netdev_priv(dev); + struct iw_param *param = &wrqu->param; + unsigned long flags; + int ret = 0; + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + + switch (param->flags & IW_AUTH_INDEX) { + case IW_AUTH_KEY_MGMT: + param->value = priv->key_mgmt; + break; + + case IW_AUTH_TKIP_COUNTERMEASURES: + param->value = priv->tkip_cm_active; + break; + + case IW_AUTH_80211_AUTH_ALG: + if (priv->wep_restrict) + param->value = IW_AUTH_ALG_SHARED_KEY; + else + param->value = IW_AUTH_ALG_OPEN_SYSTEM; + break; + + case IW_AUTH_WPA_ENABLED: + param->value = priv->wpa_enabled; + break; + + default: + ret = -EOPNOTSUPP; + } + + orinoco_unlock(priv, &flags); + return ret; +} + +static int orinoco_ioctl_set_genie(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + struct orinoco_private *priv = netdev_priv(dev); + u8 *buf; + unsigned long flags; + int err = 0; + + if ((wrqu->data.length > MAX_WPA_IE_LEN) || + (wrqu->data.length && (extra == NULL))) + return -EINVAL; + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + + if (wrqu->data.length) { + buf = kmalloc(wrqu->data.length, GFP_KERNEL); + if (buf == NULL) { + err = -ENOMEM; + goto out; + } + + memcpy(buf, extra, wrqu->data.length); + kfree(priv->wpa_ie); + priv->wpa_ie = buf; + priv->wpa_ie_len = wrqu->data.length; + } else { + kfree(priv->wpa_ie); + priv->wpa_ie = NULL; + priv->wpa_ie_len = 0; + } + + if (priv->wpa_ie) { + /* Looks like wl_lkm wants to check the auth alg, and + * somehow pass it to the firmware. + * Instead it just calls the key mgmt rid + * - we do this in set auth. + */ + } + +out: + orinoco_unlock(priv, &flags); + return err; +} + +static int orinoco_ioctl_get_genie(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + struct orinoco_private *priv = netdev_priv(dev); + unsigned long flags; + int err = 0; + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + + if ((priv->wpa_ie_len == 0) || (priv->wpa_ie == NULL)) { + wrqu->data.length = 0; + goto out; + } + + if (wrqu->data.length < priv->wpa_ie_len) { + err = -E2BIG; + goto out; + } + + wrqu->data.length = priv->wpa_ie_len; + memcpy(extra, priv->wpa_ie, priv->wpa_ie_len); + +out: + orinoco_unlock(priv, &flags); + return err; +} + +static int orinoco_ioctl_set_mlme(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + struct orinoco_private *priv = netdev_priv(dev); + hermes_t *hw = &priv->hw; + struct iw_mlme *mlme = (struct iw_mlme *)extra; + unsigned long flags; + int ret = 0; + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + + switch (mlme->cmd) { + case IW_MLME_DEAUTH: + /* silently ignore */ + break; + + case IW_MLME_DISASSOC: + { + struct { + u8 addr[ETH_ALEN]; + __le16 reason_code; + } __attribute__ ((packed)) buf; + + memcpy(buf.addr, mlme->addr.sa_data, ETH_ALEN); + buf.reason_code = cpu_to_le16(mlme->reason_code); + ret = HERMES_WRITE_RECORD(hw, USER_BAP, + HERMES_RID_CNFDISASSOCIATE, + &buf); + break; + } + default: + ret = -EOPNOTSUPP; + } + + orinoco_unlock(priv, &flags); + return ret; +} + static int orinoco_ioctl_getretry(struct net_device *dev, struct iw_request_info *info, struct iw_param *rrq, @@ -3947,7 +5288,7 @@ static int orinoco_ioctl_getrid(struct net_device *dev, return err; } -/* Trigger a scan (look for other cells in the vicinity */ +/* Trigger a scan (look for other cells in the vicinity) */ static int orinoco_ioctl_setscan(struct net_device *dev, struct iw_request_info *info, struct iw_param *srq, @@ -3955,6 +5296,7 @@ static int orinoco_ioctl_setscan(struct net_device *dev, { struct orinoco_private *priv = netdev_priv(dev); hermes_t *hw = &priv->hw; + struct iw_scan_req *si = (struct iw_scan_req *) extra; int err = 0; unsigned long flags; @@ -3986,7 +5328,6 @@ static int orinoco_ioctl_setscan(struct net_device *dev, * we access scan variables in priv is critical. * o scan_inprogress : not touched by irq handler * o scan_mode : not touched by irq handler - * o scan_len : synchronised with scan_result * Before modifying anything on those variables, please think hard ! * Jean II */ @@ -4016,13 +5357,43 @@ static int orinoco_ioctl_setscan(struct net_device *dev, } break; case FIRMWARE_TYPE_AGERE: - err = hermes_write_wordrec(hw, USER_BAP, + if (priv->scan_mode & IW_SCAN_THIS_ESSID) { + struct hermes_idstring idbuf; + size_t len = min(sizeof(idbuf.val), + (size_t) si->essid_len); + idbuf.len = cpu_to_le16(len); + memcpy(idbuf.val, si->essid, len); + + err = hermes_write_ltv(hw, USER_BAP, + HERMES_RID_CNFSCANSSID_AGERE, + HERMES_BYTES_TO_RECLEN(len + 2), + &idbuf); + } else + err = hermes_write_wordrec(hw, USER_BAP, HERMES_RID_CNFSCANSSID_AGERE, 0); /* Any ESSID */ if (err) break; - err = hermes_inquire(hw, HERMES_INQ_SCAN); + if (priv->has_ext_scan) { + /* Clear scan results at the start of + * an extended scan */ + orinoco_clear_scan_results(priv, + msecs_to_jiffies(15000)); + + /* TODO: Is this available on older firmware? + * Can we use it to scan specific channels + * for IW_SCAN_THIS_FREQ? */ + err = hermes_write_wordrec(hw, USER_BAP, + HERMES_RID_CNFSCANCHANNELS2GHZ, + 0x7FFF); + if (err) + goto out; + + err = hermes_inquire(hw, + HERMES_INQ_CHANNELINFO); + } else + err = hermes_inquire(hw, HERMES_INQ_SCAN); break; } } else @@ -4040,8 +5411,7 @@ static int orinoco_ioctl_setscan(struct net_device *dev, #define MAX_CUSTOM_LEN 64 /* Translate scan data returned from the card to a card independant - * format that the Wireless Tools will understand - Jean II - * Return message length or -errno for fatal errors */ + * format that the Wireless Tools will understand - Jean II */ static inline char *orinoco_translate_scan(struct net_device *dev, struct iw_request_info *info, char *current_ev, @@ -4053,9 +5423,10 @@ static inline char *orinoco_translate_scan(struct net_device *dev, u16 capabilities; u16 channel; struct iw_event iwe; /* Temporary buffer */ - char *p; char custom[MAX_CUSTOM_LEN]; + memset(&iwe, 0, sizeof(iwe)); + /* First entry *MUST* be the AP MAC address */ iwe.cmd = SIOCGIWAP; iwe.u.ap_addr.sa_family = ARPHRD_ETHER; @@ -4077,8 +5448,8 @@ static inline char *orinoco_translate_scan(struct net_device *dev, /* Add mode */ iwe.cmd = SIOCGIWMODE; capabilities = le16_to_cpu(bss->a.capabilities); - if (capabilities & 0x3) { - if (capabilities & 0x1) + if (capabilities & (WLAN_CAPABILITY_ESS | WLAN_CAPABILITY_IBSS)) { + if (capabilities & WLAN_CAPABILITY_ESS) iwe.u.mode = IW_MODE_MASTER; else iwe.u.mode = IW_MODE_ADHOC; @@ -4088,17 +5459,22 @@ static inline char *orinoco_translate_scan(struct net_device *dev, channel = bss->s.channel; if ((channel >= 1) && (channel <= NUM_CHANNELS)) { - /* Add frequency */ + /* Add channel and frequency */ iwe.cmd = SIOCGIWFREQ; + iwe.u.freq.m = channel; + iwe.u.freq.e = 0; + current_ev = iwe_stream_add_event(info, current_ev, end_buf, + &iwe, IW_EV_FREQ_LEN); + iwe.u.freq.m = channel_frequency[channel-1] * 100000; iwe.u.freq.e = 1; current_ev = iwe_stream_add_event(info, current_ev, end_buf, &iwe, IW_EV_FREQ_LEN); } - /* Add quality statistics */ + /* Add quality statistics. level and noise in dB. No link quality */ iwe.cmd = IWEVQUAL; - iwe.u.qual.updated = 0x10; /* no link quality */ + iwe.u.qual.updated = IW_QUAL_DBM | IW_QUAL_QUAL_INVALID; iwe.u.qual.level = (__u8) le16_to_cpu(bss->a.level) - 0x95; iwe.u.qual.noise = (__u8) le16_to_cpu(bss->a.noise) - 0x95; /* Wireless tools prior to 27.pre22 will show link quality @@ -4112,25 +5488,13 @@ static inline char *orinoco_translate_scan(struct net_device *dev, /* Add encryption capability */ iwe.cmd = SIOCGIWENCODE; - if (capabilities & 0x10) + if (capabilities & WLAN_CAPABILITY_PRIVACY) iwe.u.data.flags = IW_ENCODE_ENABLED | IW_ENCODE_NOKEY; else iwe.u.data.flags = IW_ENCODE_DISABLED; iwe.u.data.length = 0; current_ev = iwe_stream_add_point(info, current_ev, end_buf, - &iwe, bss->a.essid); - - /* Add EXTRA: Age to display seconds since last beacon/probe response - * for given network. */ - iwe.cmd = IWEVCUSTOM; - p = custom; - p += snprintf(p, MAX_CUSTOM_LEN - (p - custom), - " Last beacon: %dms ago", - jiffies_to_msecs(jiffies - last_scanned)); - iwe.u.data.length = p - custom; - if (iwe.u.data.length) - current_ev = iwe_stream_add_point(info, current_ev, end_buf, - &iwe, custom); + &iwe, NULL); /* Bit rate is not available in Lucent/Agere firmwares */ if (priv->firmware_type != FIRMWARE_TYPE_AGERE) { @@ -4152,7 +5516,8 @@ static inline char *orinoco_translate_scan(struct net_device *dev, if (bss->p.rates[i] == 0x0) break; /* Bit rate given in 500 kb/s units (+ 0x80) */ - iwe.u.bitrate.value = ((bss->p.rates[i] & 0x7f) * 500000); + iwe.u.bitrate.value = + ((bss->p.rates[i] & 0x7f) * 500000); current_val = iwe_stream_add_value(info, current_ev, current_val, end_buf, &iwe, @@ -4163,6 +5528,199 @@ static inline char *orinoco_translate_scan(struct net_device *dev, current_ev = current_val; } + /* Beacon interval */ + iwe.cmd = IWEVCUSTOM; + iwe.u.data.length = snprintf(custom, MAX_CUSTOM_LEN, + "bcn_int=%d", + le16_to_cpu(bss->a.beacon_interv)); + if (iwe.u.data.length) + current_ev = iwe_stream_add_point(info, current_ev, end_buf, + &iwe, custom); + + /* Capabilites */ + iwe.cmd = IWEVCUSTOM; + iwe.u.data.length = snprintf(custom, MAX_CUSTOM_LEN, + "capab=0x%04x", + capabilities); + if (iwe.u.data.length) + current_ev = iwe_stream_add_point(info, current_ev, end_buf, + &iwe, custom); + + /* Add EXTRA: Age to display seconds since last beacon/probe response + * for given network. */ + iwe.cmd = IWEVCUSTOM; + iwe.u.data.length = snprintf(custom, MAX_CUSTOM_LEN, + " Last beacon: %dms ago", + jiffies_to_msecs(jiffies - last_scanned)); + if (iwe.u.data.length) + current_ev = iwe_stream_add_point(info, current_ev, end_buf, + &iwe, custom); + + return current_ev; +} + +static inline char *orinoco_translate_ext_scan(struct net_device *dev, + struct iw_request_info *info, + char *current_ev, + char *end_buf, + struct agere_ext_scan_info *bss, + unsigned int last_scanned) +{ + u16 capabilities; + u16 channel; + struct iw_event iwe; /* Temporary buffer */ + char custom[MAX_CUSTOM_LEN]; + u8 *ie; + + memset(&iwe, 0, sizeof(iwe)); + + /* First entry *MUST* be the AP MAC address */ + iwe.cmd = SIOCGIWAP; + iwe.u.ap_addr.sa_family = ARPHRD_ETHER; + memcpy(iwe.u.ap_addr.sa_data, bss->bssid, ETH_ALEN); + current_ev = iwe_stream_add_event(info, current_ev, end_buf, + &iwe, IW_EV_ADDR_LEN); + + /* Other entries will be displayed in the order we give them */ + + /* Add the ESSID */ + ie = bss->data; + iwe.u.data.length = ie[1]; + if (iwe.u.data.length) { + if (iwe.u.data.length > 32) + iwe.u.data.length = 32; + iwe.cmd = SIOCGIWESSID; + iwe.u.data.flags = 1; + current_ev = iwe_stream_add_point(info, current_ev, end_buf, + &iwe, &ie[2]); + } + + /* Add mode */ + capabilities = le16_to_cpu(bss->capabilities); + if (capabilities & (WLAN_CAPABILITY_ESS | WLAN_CAPABILITY_IBSS)) { + iwe.cmd = SIOCGIWMODE; + if (capabilities & WLAN_CAPABILITY_ESS) + iwe.u.mode = IW_MODE_MASTER; + else + iwe.u.mode = IW_MODE_ADHOC; + current_ev = iwe_stream_add_event(info, current_ev, end_buf, + &iwe, IW_EV_UINT_LEN); + } + + ie = orinoco_get_ie(bss->data, sizeof(bss->data), MFIE_TYPE_DS_SET); + channel = ie ? ie[2] : 0; + if ((channel >= 1) && (channel <= NUM_CHANNELS)) { + /* Add channel and frequency */ + iwe.cmd = SIOCGIWFREQ; + iwe.u.freq.m = channel; + iwe.u.freq.e = 0; + current_ev = iwe_stream_add_event(info, current_ev, end_buf, + &iwe, IW_EV_FREQ_LEN); + + iwe.u.freq.m = channel_frequency[channel-1] * 100000; + iwe.u.freq.e = 1; + current_ev = iwe_stream_add_event(info, current_ev, end_buf, + &iwe, IW_EV_FREQ_LEN); + } + + /* Add quality statistics. level and noise in dB. No link quality */ + iwe.cmd = IWEVQUAL; + iwe.u.qual.updated = IW_QUAL_DBM | IW_QUAL_QUAL_INVALID; + iwe.u.qual.level = bss->level - 0x95; + iwe.u.qual.noise = bss->noise - 0x95; + /* Wireless tools prior to 27.pre22 will show link quality + * anyway, so we provide a reasonable value. */ + if (iwe.u.qual.level > iwe.u.qual.noise) + iwe.u.qual.qual = iwe.u.qual.level - iwe.u.qual.noise; + else + iwe.u.qual.qual = 0; + current_ev = iwe_stream_add_event(info, current_ev, end_buf, + &iwe, IW_EV_QUAL_LEN); + + /* Add encryption capability */ + iwe.cmd = SIOCGIWENCODE; + if (capabilities & WLAN_CAPABILITY_PRIVACY) + iwe.u.data.flags = IW_ENCODE_ENABLED | IW_ENCODE_NOKEY; + else + iwe.u.data.flags = IW_ENCODE_DISABLED; + iwe.u.data.length = 0; + current_ev = iwe_stream_add_point(info, current_ev, end_buf, + &iwe, NULL); + + /* WPA IE */ + ie = orinoco_get_wpa_ie(bss->data, sizeof(bss->data)); + if (ie) { + iwe.cmd = IWEVGENIE; + iwe.u.data.length = ie[1] + 2; + current_ev = iwe_stream_add_point(info, current_ev, end_buf, + &iwe, ie); + } + + /* RSN IE */ + ie = orinoco_get_ie(bss->data, sizeof(bss->data), MFIE_TYPE_RSN); + if (ie) { + iwe.cmd = IWEVGENIE; + iwe.u.data.length = ie[1] + 2; + current_ev = iwe_stream_add_point(info, current_ev, end_buf, + &iwe, ie); + } + + ie = orinoco_get_ie(bss->data, sizeof(bss->data), MFIE_TYPE_RATES); + if (ie) { + char *p = current_ev + iwe_stream_lcp_len(info); + int i; + + iwe.cmd = SIOCGIWRATE; + /* Those two flags are ignored... */ + iwe.u.bitrate.fixed = iwe.u.bitrate.disabled = 0; + + for (i = 2; i < (ie[1] + 2); i++) { + iwe.u.bitrate.value = ((ie[i] & 0x7F) * 500000); + p = iwe_stream_add_value(info, current_ev, p, end_buf, + &iwe, IW_EV_PARAM_LEN); + } + /* Check if we added any event */ + if (p > (current_ev + iwe_stream_lcp_len(info))) + current_ev = p; + } + + /* Timestamp */ + iwe.cmd = IWEVCUSTOM; + iwe.u.data.length = snprintf(custom, MAX_CUSTOM_LEN, + "tsf=%016llx", + le64_to_cpu(bss->timestamp)); + if (iwe.u.data.length) + current_ev = iwe_stream_add_point(info, current_ev, end_buf, + &iwe, custom); + + /* Beacon interval */ + iwe.cmd = IWEVCUSTOM; + iwe.u.data.length = snprintf(custom, MAX_CUSTOM_LEN, + "bcn_int=%d", + le16_to_cpu(bss->beacon_interval)); + if (iwe.u.data.length) + current_ev = iwe_stream_add_point(info, current_ev, end_buf, + &iwe, custom); + + /* Capabilites */ + iwe.cmd = IWEVCUSTOM; + iwe.u.data.length = snprintf(custom, MAX_CUSTOM_LEN, + "capab=0x%04x", + capabilities); + if (iwe.u.data.length) + current_ev = iwe_stream_add_point(info, current_ev, end_buf, + &iwe, custom); + + /* Add EXTRA: Age to display seconds since last beacon/probe response + * for given network. */ + iwe.cmd = IWEVCUSTOM; + iwe.u.data.length = snprintf(custom, MAX_CUSTOM_LEN, + " Last beacon: %dms ago", + jiffies_to_msecs(jiffies - last_scanned)); + if (iwe.u.data.length) + current_ev = iwe_stream_add_point(info, current_ev, end_buf, + &iwe, custom); + return current_ev; } @@ -4173,7 +5731,6 @@ static int orinoco_ioctl_getscan(struct net_device *dev, char *extra) { struct orinoco_private *priv = netdev_priv(dev); - bss_element *bss; int err = 0; unsigned long flags; char *current_ev = extra; @@ -4193,18 +5750,47 @@ static int orinoco_ioctl_getscan(struct net_device *dev, goto out; } - list_for_each_entry(bss, &priv->bss_list, list) { - /* Translate to WE format this entry */ - current_ev = orinoco_translate_scan(dev, info, current_ev, - extra + srq->length, - &bss->bss, - bss->last_scanned); - - /* Check if there is space for one more entry */ - if ((extra + srq->length - current_ev) <= IW_EV_ADDR_LEN) { - /* Ask user space to try again with a bigger buffer */ - err = -E2BIG; - goto out; + if (priv->has_ext_scan) { + struct xbss_element *bss; + + list_for_each_entry(bss, &priv->bss_list, list) { + /* Translate this entry to WE format */ + current_ev = + orinoco_translate_ext_scan(dev, info, + current_ev, + extra + srq->length, + &bss->bss, + bss->last_scanned); + + /* Check if there is space for one more entry */ + if ((extra + srq->length - current_ev) + <= IW_EV_ADDR_LEN) { + /* Ask user space to try again with a + * bigger buffer */ + err = -E2BIG; + goto out; + } + } + + } else { + struct bss_element *bss; + + list_for_each_entry(bss, &priv->bss_list, list) { + /* Translate this entry to WE format */ + current_ev = orinoco_translate_scan(dev, info, + current_ev, + extra + srq->length, + &bss->bss, + bss->last_scanned); + + /* Check if there is space for one more entry */ + if ((extra + srq->length - current_ev) + <= IW_EV_ADDR_LEN) { + /* Ask user space to try again with a + * bigger buffer */ + err = -E2BIG; + goto out; + } } } @@ -4295,39 +5881,48 @@ static const struct iw_priv_args orinoco_privtab[] = { * Structures to export the Wireless Handlers */ +#define STD_IW_HANDLER(id, func) \ + [IW_IOCTL_IDX(id)] = (iw_handler) func static const iw_handler orinoco_handler[] = { - [SIOCSIWCOMMIT-SIOCIWFIRST] = (iw_handler) orinoco_ioctl_commit, - [SIOCGIWNAME -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getname, - [SIOCSIWFREQ -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_setfreq, - [SIOCGIWFREQ -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getfreq, - [SIOCSIWMODE -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_setmode, - [SIOCGIWMODE -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getmode, - [SIOCSIWSENS -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_setsens, - [SIOCGIWSENS -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getsens, - [SIOCGIWRANGE -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getiwrange, - [SIOCSIWSPY -SIOCIWFIRST] = (iw_handler) iw_handler_set_spy, - [SIOCGIWSPY -SIOCIWFIRST] = (iw_handler) iw_handler_get_spy, - [SIOCSIWTHRSPY-SIOCIWFIRST] = (iw_handler) iw_handler_set_thrspy, - [SIOCGIWTHRSPY-SIOCIWFIRST] = (iw_handler) iw_handler_get_thrspy, - [SIOCSIWAP -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_setwap, - [SIOCGIWAP -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getwap, - [SIOCSIWSCAN -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_setscan, - [SIOCGIWSCAN -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getscan, - [SIOCSIWESSID -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_setessid, - [SIOCGIWESSID -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getessid, - [SIOCSIWNICKN -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_setnick, - [SIOCGIWNICKN -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getnick, - [SIOCSIWRATE -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_setrate, - [SIOCGIWRATE -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getrate, - [SIOCSIWRTS -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_setrts, - [SIOCGIWRTS -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getrts, - [SIOCSIWFRAG -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_setfrag, - [SIOCGIWFRAG -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getfrag, - [SIOCGIWRETRY -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getretry, - [SIOCSIWENCODE-SIOCIWFIRST] = (iw_handler) orinoco_ioctl_setiwencode, - [SIOCGIWENCODE-SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getiwencode, - [SIOCSIWPOWER -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_setpower, - [SIOCGIWPOWER -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getpower, + STD_IW_HANDLER(SIOCSIWCOMMIT, orinoco_ioctl_commit), + STD_IW_HANDLER(SIOCGIWNAME, orinoco_ioctl_getname), + STD_IW_HANDLER(SIOCSIWFREQ, orinoco_ioctl_setfreq), + STD_IW_HANDLER(SIOCGIWFREQ, orinoco_ioctl_getfreq), + STD_IW_HANDLER(SIOCSIWMODE, orinoco_ioctl_setmode), + STD_IW_HANDLER(SIOCGIWMODE, orinoco_ioctl_getmode), + STD_IW_HANDLER(SIOCSIWSENS, orinoco_ioctl_setsens), + STD_IW_HANDLER(SIOCGIWSENS, orinoco_ioctl_getsens), + STD_IW_HANDLER(SIOCGIWRANGE, orinoco_ioctl_getiwrange), + STD_IW_HANDLER(SIOCSIWSPY, iw_handler_set_spy), + STD_IW_HANDLER(SIOCGIWSPY, iw_handler_get_spy), + STD_IW_HANDLER(SIOCSIWTHRSPY, iw_handler_set_thrspy), + STD_IW_HANDLER(SIOCGIWTHRSPY, iw_handler_get_thrspy), + STD_IW_HANDLER(SIOCSIWAP, orinoco_ioctl_setwap), + STD_IW_HANDLER(SIOCGIWAP, orinoco_ioctl_getwap), + STD_IW_HANDLER(SIOCSIWSCAN, orinoco_ioctl_setscan), + STD_IW_HANDLER(SIOCGIWSCAN, orinoco_ioctl_getscan), + STD_IW_HANDLER(SIOCSIWESSID, orinoco_ioctl_setessid), + STD_IW_HANDLER(SIOCGIWESSID, orinoco_ioctl_getessid), + STD_IW_HANDLER(SIOCSIWNICKN, orinoco_ioctl_setnick), + STD_IW_HANDLER(SIOCGIWNICKN, orinoco_ioctl_getnick), + STD_IW_HANDLER(SIOCSIWRATE, orinoco_ioctl_setrate), + STD_IW_HANDLER(SIOCGIWRATE, orinoco_ioctl_getrate), + STD_IW_HANDLER(SIOCSIWRTS, orinoco_ioctl_setrts), + STD_IW_HANDLER(SIOCGIWRTS, orinoco_ioctl_getrts), + STD_IW_HANDLER(SIOCSIWFRAG, orinoco_ioctl_setfrag), + STD_IW_HANDLER(SIOCGIWFRAG, orinoco_ioctl_getfrag), + STD_IW_HANDLER(SIOCGIWRETRY, orinoco_ioctl_getretry), + STD_IW_HANDLER(SIOCSIWENCODE, orinoco_ioctl_setiwencode), + STD_IW_HANDLER(SIOCGIWENCODE, orinoco_ioctl_getiwencode), + STD_IW_HANDLER(SIOCSIWPOWER, orinoco_ioctl_setpower), + STD_IW_HANDLER(SIOCGIWPOWER, orinoco_ioctl_getpower), + STD_IW_HANDLER(SIOCSIWGENIE, orinoco_ioctl_set_genie), + STD_IW_HANDLER(SIOCGIWGENIE, orinoco_ioctl_get_genie), + STD_IW_HANDLER(SIOCSIWMLME, orinoco_ioctl_set_mlme), + STD_IW_HANDLER(SIOCSIWAUTH, orinoco_ioctl_set_auth), + STD_IW_HANDLER(SIOCGIWAUTH, orinoco_ioctl_get_auth), + STD_IW_HANDLER(SIOCSIWENCODEEXT, orinoco_ioctl_set_encodeext), + STD_IW_HANDLER(SIOCGIWENCODEEXT, orinoco_ioctl_get_encodeext), }; diff --git a/drivers/net/wireless/orinoco.h b/drivers/net/wireless/orinoco.h index c6b1858abde..981570bd3b9 100644 --- a/drivers/net/wireless/orinoco.h +++ b/drivers/net/wireless/orinoco.h @@ -9,6 +9,7 @@ #define DRIVER_VERSION "0.15" +#include <linux/interrupt.h> #include <linux/netdevice.h> #include <linux/wireless.h> #include <net/iw_handler.h> @@ -30,27 +31,57 @@ struct orinoco_key { char data[ORINOCO_MAX_KEY_SIZE]; } __attribute__ ((packed)); +#define TKIP_KEYLEN 16 +#define MIC_KEYLEN 8 + +struct orinoco_tkip_key { + u8 tkip[TKIP_KEYLEN]; + u8 tx_mic[MIC_KEYLEN]; + u8 rx_mic[MIC_KEYLEN]; +}; + typedef enum { FIRMWARE_TYPE_AGERE, FIRMWARE_TYPE_INTERSIL, FIRMWARE_TYPE_SYMBOL } fwtype_t; -typedef struct { +struct bss_element { union hermes_scan_info bss; unsigned long last_scanned; struct list_head list; -} bss_element; +}; + +struct xbss_element { + struct agere_ext_scan_info bss; + unsigned long last_scanned; + struct list_head list; +}; + +struct hermes_rx_descriptor; + +struct orinoco_rx_data { + struct hermes_rx_descriptor *desc; + struct sk_buff *skb; + struct list_head list; +}; struct orinoco_private { void *card; /* Pointer to card dependent structure */ + struct device *dev; int (*hard_reset)(struct orinoco_private *); + int (*stop_fw)(struct orinoco_private *, int); /* Synchronisation stuff */ spinlock_t lock; int hw_unavailable; struct work_struct reset_work; + /* Interrupt tasklets */ + struct tasklet_struct rx_tasklet; + struct list_head rx_list; + struct orinoco_rx_data *rx_data; + /* driver state */ int open; u16 last_linkstatus; @@ -83,13 +114,17 @@ struct orinoco_private { unsigned int has_preamble:1; unsigned int has_sensitivity:1; unsigned int has_hostscan:1; + unsigned int has_alt_txcntl:1; + unsigned int has_ext_scan:1; + unsigned int has_wpa:1; + unsigned int do_fw_download:1; unsigned int broken_disableport:1; unsigned int broken_monitor:1; /* Configuration paramaters */ u32 iw_mode; int prefer_port3; - u16 wep_on, wep_restrict, tx_key; + u16 encode_alg, wep_restrict, tx_key; struct orinoco_key keys[ORINOCO_MAX_KEYS]; int bitratemode; char nick[IW_ESSID_MAX_SIZE+1]; @@ -113,10 +148,22 @@ struct orinoco_private { /* Scanning support */ struct list_head bss_list; struct list_head bss_free_list; - bss_element *bss_data; + void *bss_xbss_data; int scan_inprogress; /* Scan pending... */ u32 scan_mode; /* Type of scan done */ + + /* WPA support */ + u8 *wpa_ie; + int wpa_ie_len; + + struct orinoco_tkip_key tkip_key[ORINOCO_MAX_KEYS]; + struct crypto_hash *rx_tfm_mic; + struct crypto_hash *tx_tfm_mic; + + unsigned int wpa_enabled:1; + unsigned int tkip_cm_active:1; + unsigned int key_mgmt:3; }; #ifdef ORINOCO_DEBUG @@ -130,8 +177,10 @@ extern int orinoco_debug; /* Exported prototypes */ /********************************************************************/ -extern struct net_device *alloc_orinocodev(int sizeof_card, - int (*hard_reset)(struct orinoco_private *)); +extern struct net_device *alloc_orinocodev( + int sizeof_card, struct device *device, + int (*hard_reset)(struct orinoco_private *), + int (*stop_fw)(struct orinoco_private *, int)); extern void free_orinocodev(struct net_device *dev); extern int __orinoco_up(struct net_device *dev); extern int __orinoco_down(struct net_device *dev); diff --git a/drivers/net/wireless/orinoco_cs.c b/drivers/net/wireless/orinoco_cs.c index 1c216e015f6..1ccf5a40cf0 100644 --- a/drivers/net/wireless/orinoco_cs.c +++ b/drivers/net/wireless/orinoco_cs.c @@ -109,7 +109,8 @@ orinoco_cs_probe(struct pcmcia_device *link) struct orinoco_private *priv; struct orinoco_pccard *card; - dev = alloc_orinocodev(sizeof(*card), orinoco_cs_hard_reset); + dev = alloc_orinocodev(sizeof(*card), &handle_to_dev(link), + orinoco_cs_hard_reset, NULL); if (! dev) return -ENOMEM; priv = netdev_priv(dev); diff --git a/drivers/net/wireless/orinoco_nortel.c b/drivers/net/wireless/orinoco_nortel.c index 35ec5fcf81a..2fc86596302 100644 --- a/drivers/net/wireless/orinoco_nortel.c +++ b/drivers/net/wireless/orinoco_nortel.c @@ -182,7 +182,8 @@ static int orinoco_nortel_init_one(struct pci_dev *pdev, } /* Allocate network device */ - dev = alloc_orinocodev(sizeof(*card), orinoco_nortel_cor_reset); + dev = alloc_orinocodev(sizeof(*card), &pdev->dev, + orinoco_nortel_cor_reset, NULL); if (!dev) { printk(KERN_ERR PFX "Cannot allocate network device\n"); err = -ENOMEM; diff --git a/drivers/net/wireless/orinoco_pci.c b/drivers/net/wireless/orinoco_pci.c index 2547d5dac0d..4ebd638a073 100644 --- a/drivers/net/wireless/orinoco_pci.c +++ b/drivers/net/wireless/orinoco_pci.c @@ -139,7 +139,8 @@ static int orinoco_pci_init_one(struct pci_dev *pdev, } /* Allocate network device */ - dev = alloc_orinocodev(sizeof(*card), orinoco_pci_cor_reset); + dev = alloc_orinocodev(sizeof(*card), &pdev->dev, + orinoco_pci_cor_reset, NULL); if (!dev) { printk(KERN_ERR PFX "Cannot allocate network device\n"); err = -ENOMEM; diff --git a/drivers/net/wireless/orinoco_plx.c b/drivers/net/wireless/orinoco_plx.c index 98fe165337d..ef761857bb3 100644 --- a/drivers/net/wireless/orinoco_plx.c +++ b/drivers/net/wireless/orinoco_plx.c @@ -221,7 +221,8 @@ static int orinoco_plx_init_one(struct pci_dev *pdev, } /* Allocate network device */ - dev = alloc_orinocodev(sizeof(*card), orinoco_plx_cor_reset); + dev = alloc_orinocodev(sizeof(*card), &pdev->dev, + orinoco_plx_cor_reset, NULL); if (!dev) { printk(KERN_ERR PFX "Cannot allocate network device\n"); err = -ENOMEM; diff --git a/drivers/net/wireless/orinoco_tmd.c b/drivers/net/wireless/orinoco_tmd.c index df493185a4a..ede24ec309c 100644 --- a/drivers/net/wireless/orinoco_tmd.c +++ b/drivers/net/wireless/orinoco_tmd.c @@ -124,7 +124,8 @@ static int orinoco_tmd_init_one(struct pci_dev *pdev, } /* Allocate network device */ - dev = alloc_orinocodev(sizeof(*card), orinoco_tmd_cor_reset); + dev = alloc_orinocodev(sizeof(*card), &pdev->dev, + orinoco_tmd_cor_reset, NULL); if (!dev) { printk(KERN_ERR PFX "Cannot allocate network device\n"); err = -ENOMEM; diff --git a/drivers/net/wireless/p54/p54.h b/drivers/net/wireless/p54/p54.h index 4801a363507..98d4f8e7d84 100644 --- a/drivers/net/wireless/p54/p54.h +++ b/drivers/net/wireless/p54/p54.h @@ -1,5 +1,5 @@ -#ifndef PRISM54_H -#define PRISM54_H +#ifndef P54_H +#define P54_H /* * Shared defines for all mac80211 Prism54 code @@ -19,13 +19,24 @@ enum control_frame_types { P54_CONTROL_TYPE_CHANNEL_CHANGE, P54_CONTROL_TYPE_FREQDONE, P54_CONTROL_TYPE_DCFINIT, - P54_CONTROL_TYPE_FREEQUEUE = 7, + P54_CONTROL_TYPE_ENCRYPTION, + P54_CONTROL_TYPE_TIM, + P54_CONTROL_TYPE_POWERMGT, + P54_CONTROL_TYPE_FREEQUEUE, P54_CONTROL_TYPE_TXDONE, P54_CONTROL_TYPE_PING, P54_CONTROL_TYPE_STAT_READBACK, P54_CONTROL_TYPE_BBP, P54_CONTROL_TYPE_EEPROM_READBACK, - P54_CONTROL_TYPE_LED + P54_CONTROL_TYPE_LED, + P54_CONTROL_TYPE_GPIO, + P54_CONTROL_TYPE_TIMER, + P54_CONTROL_TYPE_MODULATION, + P54_CONTROL_TYPE_SYNTH_CONFIG, + P54_CONTROL_TYPE_DETECTOR_VALUE, + P54_CONTROL_TYPE_XBOW_SYNTH_CFG, + P54_CONTROL_TYPE_CCE_QUIET, + P54_CONTROL_TYPE_PSM_STA_UNLOCK, }; struct p54_control_hdr { @@ -38,11 +49,15 @@ struct p54_control_hdr { u8 data[0]; } __attribute__ ((packed)); -#define EEPROM_READBACK_LEN (sizeof(struct p54_control_hdr) + 4 /* p54_eeprom_lm86 */) -#define MAX_RX_SIZE (IEEE80211_MAX_RTS_THRESHOLD + sizeof(struct p54_control_hdr) + 20 /* length of struct p54_rx_hdr */ + 16 ) +#define EEPROM_READBACK_LEN 0x3fc #define ISL38XX_DEV_FIRMWARE_ADDR 0x20000 +#define FW_FMAC 0x464d4143 +#define FW_LM86 0x4c4d3836 +#define FW_LM87 0x4c4d3837 +#define FW_LM20 0x4c4d3230 + struct p54_common { u32 rx_start; u32 rx_end; @@ -53,27 +68,34 @@ struct p54_common { void (*stop)(struct ieee80211_hw *dev); int mode; u16 seqno; + u16 rx_mtu; + u8 headroom; + u8 tailroom; struct mutex conf_mutex; u8 mac_addr[ETH_ALEN]; u8 bssid[ETH_ALEN]; + __le16 filter_type; struct pda_iq_autocal_entry *iq_autocal; unsigned int iq_autocal_len; struct pda_channel_output_limit *output_limit; unsigned int output_limit_len; struct pda_pa_curve_data *curve_data; - __le16 rxhw; + u16 rxhw; u8 version; + u8 rx_antenna; unsigned int tx_hdr_len; void *cached_vdcf; unsigned int fw_var; - struct ieee80211_tx_queue_stats tx_stats[4]; + unsigned int fw_interface; + struct ieee80211_tx_queue_stats tx_stats[8]; + void *eeprom; + struct completion eeprom_comp; }; int p54_rx(struct ieee80211_hw *dev, struct sk_buff *skb); -void p54_parse_firmware(struct ieee80211_hw *dev, const struct firmware *fw); -int p54_parse_eeprom(struct ieee80211_hw *dev, void *eeprom, int len); -void p54_fill_eeprom_readback(struct p54_control_hdr *hdr); +int p54_parse_firmware(struct ieee80211_hw *dev, const struct firmware *fw); +int p54_read_eeprom(struct ieee80211_hw *dev); struct ieee80211_hw *p54_init_common(size_t priv_data_len); void p54_free_common(struct ieee80211_hw *dev); -#endif /* PRISM54_H */ +#endif /* P54_H */ diff --git a/drivers/net/wireless/p54/p54common.c b/drivers/net/wireless/p54/p54common.c index 29be3dc8ee0..f96f7c7e6af 100644 --- a/drivers/net/wireless/p54/p54common.c +++ b/drivers/net/wireless/p54/p54common.c @@ -66,8 +66,7 @@ static struct ieee80211_supported_band band_2GHz = { .n_bitrates = ARRAY_SIZE(p54_rates), }; - -void p54_parse_firmware(struct ieee80211_hw *dev, const struct firmware *fw) +int p54_parse_firmware(struct ieee80211_hw *dev, const struct firmware *fw) { struct p54_common *priv = dev->priv; struct bootrec_exp_if *exp_if; @@ -79,7 +78,7 @@ void p54_parse_firmware(struct ieee80211_hw *dev, const struct firmware *fw) int i; if (priv->rx_start) - return; + return 0; while (data < end_data && *data) data++; @@ -94,7 +93,8 @@ void p54_parse_firmware(struct ieee80211_hw *dev, const struct firmware *fw) u32 code = le32_to_cpu(bootrec->code); switch (code) { case BR_CODE_COMPONENT_ID: - switch (be32_to_cpu(*(__be32 *)bootrec->data)) { + priv->fw_interface = be32_to_cpup(bootrec->data); + switch (priv->fw_interface) { case FW_FMAC: printk(KERN_INFO "p54: FreeMAC firmware\n"); break; @@ -105,7 +105,7 @@ void p54_parse_firmware(struct ieee80211_hw *dev, const struct firmware *fw) printk(KERN_INFO "p54: LM86 firmware\n"); break; case FW_LM87: - printk(KERN_INFO "p54: LM87 firmware - not supported yet!\n"); + printk(KERN_INFO "p54: LM87 firmware\n"); break; default: printk(KERN_INFO "p54: unknown firmware\n"); @@ -117,11 +117,22 @@ void p54_parse_firmware(struct ieee80211_hw *dev, const struct firmware *fw) if (strnlen((unsigned char*)bootrec->data, 24) < 24) fw_version = (unsigned char*)bootrec->data; break; - case BR_CODE_DESCR: - priv->rx_start = le32_to_cpu(((__le32 *)bootrec->data)[1]); + case BR_CODE_DESCR: { + struct bootrec_desc *desc = + (struct bootrec_desc *)bootrec->data; + priv->rx_start = le32_to_cpu(desc->rx_start); /* FIXME add sanity checking */ - priv->rx_end = le32_to_cpu(((__le32 *)bootrec->data)[2]) - 0x3500; + priv->rx_end = le32_to_cpu(desc->rx_end) - 0x3500; + priv->headroom = desc->headroom; + priv->tailroom = desc->tailroom; + if (bootrec->len == 11) + priv->rx_mtu = (size_t) le16_to_cpu( + (__le16)bootrec->data[10]); + else + priv->rx_mtu = (size_t) + 0x620 - priv->tx_hdr_len; break; + } case BR_CODE_EXPOSED_IF: exp_if = (struct bootrec_exp_if *) bootrec->data; for (i = 0; i < (len * sizeof(*exp_if) / 4); i++) @@ -146,23 +157,25 @@ void p54_parse_firmware(struct ieee80211_hw *dev, const struct firmware *fw) if (priv->fw_var >= 0x300) { /* Firmware supports QoS, use it! */ - priv->tx_stats[0].limit = 3; - priv->tx_stats[1].limit = 4; - priv->tx_stats[2].limit = 3; - priv->tx_stats[3].limit = 1; + priv->tx_stats[4].limit = 3; + priv->tx_stats[5].limit = 4; + priv->tx_stats[6].limit = 3; + priv->tx_stats[7].limit = 1; dev->queues = 4; } + + return 0; } EXPORT_SYMBOL_GPL(p54_parse_firmware); -static int p54_convert_rev0_to_rev1(struct ieee80211_hw *dev, - struct pda_pa_curve_data *curve_data) +static int p54_convert_rev0(struct ieee80211_hw *dev, + struct pda_pa_curve_data *curve_data) { struct p54_common *priv = dev->priv; - struct pda_pa_curve_data_sample_rev1 *rev1; - struct pda_pa_curve_data_sample_rev0 *rev0; + struct p54_pa_curve_data_sample *dst; + struct pda_pa_curve_data_sample_rev0 *src; size_t cd_len = sizeof(*curve_data) + - (curve_data->points_per_channel*sizeof(*rev1) + 2) * + (curve_data->points_per_channel*sizeof(*dst) + 2) * curve_data->channels; unsigned int i, j; void *source, *target; @@ -180,27 +193,66 @@ static int p54_convert_rev0_to_rev1(struct ieee80211_hw *dev, *((__le16 *)target) = *freq; target += sizeof(__le16); for (j = 0; j < curve_data->points_per_channel; j++) { - rev1 = target; - rev0 = source; + dst = target; + src = source; - rev1->rf_power = rev0->rf_power; - rev1->pa_detector = rev0->pa_detector; - rev1->data_64qam = rev0->pcv; + dst->rf_power = src->rf_power; + dst->pa_detector = src->pa_detector; + dst->data_64qam = src->pcv; /* "invent" the points for the other modulations */ #define SUB(x,y) (u8)((x) - (y)) > (x) ? 0 : (x) - (y) - rev1->data_16qam = SUB(rev0->pcv, 12); - rev1->data_qpsk = SUB(rev1->data_16qam, 12); - rev1->data_bpsk = SUB(rev1->data_qpsk, 12); - rev1->data_barker= SUB(rev1->data_bpsk, 14); + dst->data_16qam = SUB(src->pcv, 12); + dst->data_qpsk = SUB(dst->data_16qam, 12); + dst->data_bpsk = SUB(dst->data_qpsk, 12); + dst->data_barker = SUB(dst->data_bpsk, 14); #undef SUB - target += sizeof(*rev1); - source += sizeof(*rev0); + target += sizeof(*dst); + source += sizeof(*src); + } + } + + return 0; +} + +static int p54_convert_rev1(struct ieee80211_hw *dev, + struct pda_pa_curve_data *curve_data) +{ + struct p54_common *priv = dev->priv; + struct p54_pa_curve_data_sample *dst; + struct pda_pa_curve_data_sample_rev1 *src; + size_t cd_len = sizeof(*curve_data) + + (curve_data->points_per_channel*sizeof(*dst) + 2) * + curve_data->channels; + unsigned int i, j; + void *source, *target; + + priv->curve_data = kmalloc(cd_len, GFP_KERNEL); + if (!priv->curve_data) + return -ENOMEM; + + memcpy(priv->curve_data, curve_data, sizeof(*curve_data)); + source = curve_data->data; + target = priv->curve_data->data; + for (i = 0; i < curve_data->channels; i++) { + __le16 *freq = source; + source += sizeof(__le16); + *((__le16 *)target) = *freq; + target += sizeof(__le16); + for (j = 0; j < curve_data->points_per_channel; j++) { + memcpy(target, source, sizeof(*src)); + + target += sizeof(*dst); + source += sizeof(*src); } + source++; } return 0; } +const char* p54_rf_chips[] = { "NULL", "Indigo?", "Duette", + "Frisbee", "Xbow", "Longbow" }; + int p54_parse_eeprom(struct ieee80211_hw *dev, void *eeprom, int len) { struct p54_common *priv = dev->priv; @@ -210,6 +262,7 @@ int p54_parse_eeprom(struct ieee80211_hw *dev, void *eeprom, int len) void *tmp; int err; u8 *end = (u8 *)eeprom + len; + DECLARE_MAC_BUF(mac); wrap = (struct eeprom_pda_wrap *) eeprom; entry = (void *)wrap->data + le16_to_cpu(wrap->len); @@ -250,27 +303,32 @@ int p54_parse_eeprom(struct ieee80211_hw *dev, void *eeprom, int len) entry->data[1]*sizeof(*priv->output_limit)); priv->output_limit_len = entry->data[1]; break; - case PDR_PRISM_PA_CAL_CURVE_DATA: - if (data_len < sizeof(struct pda_pa_curve_data)) { + case PDR_PRISM_PA_CAL_CURVE_DATA: { + struct pda_pa_curve_data *curve_data = + (struct pda_pa_curve_data *)entry->data; + if (data_len < sizeof(*curve_data)) { err = -EINVAL; goto err; } - if (((struct pda_pa_curve_data *)entry->data)->cal_method_rev) { - priv->curve_data = kmalloc(data_len, GFP_KERNEL); - if (!priv->curve_data) { - err = -ENOMEM; - goto err; - } - - memcpy(priv->curve_data, entry->data, data_len); - } else { - err = p54_convert_rev0_to_rev1(dev, (struct pda_pa_curve_data *)entry->data); - if (err) - goto err; + switch (curve_data->cal_method_rev) { + case 0: + err = p54_convert_rev0(dev, curve_data); + break; + case 1: + err = p54_convert_rev1(dev, curve_data); + break; + default: + printk(KERN_ERR "p54: unknown curve data " + "revision %d\n", + curve_data->cal_method_rev); + err = -ENODEV; + break; } + if (err) + goto err; - break; + } case PDR_PRISM_ZIF_TX_IQ_CALIBRATION: priv->iq_autocal = kmalloc(data_len, GFP_KERNEL); if (!priv->iq_autocal) { @@ -286,7 +344,7 @@ int p54_parse_eeprom(struct ieee80211_hw *dev, void *eeprom, int len) while ((u8 *)tmp < entry->data + data_len) { struct bootrec_exp_if *exp_if = tmp; if (le16_to_cpu(exp_if->if_id) == 0xF) - priv->rxhw = exp_if->variant & cpu_to_le16(0x07); + priv->rxhw = le16_to_cpu(exp_if->variant) & 0x07; tmp += sizeof(struct bootrec_exp_if); } break; @@ -312,6 +370,37 @@ int p54_parse_eeprom(struct ieee80211_hw *dev, void *eeprom, int len) goto err; } + switch (priv->rxhw) { + case 4: /* XBow */ + case 1: /* Indigo? */ + case 2: /* Duette */ + /* TODO: 5GHz initialization goes here */ + + case 3: /* Frisbee */ + case 5: /* Longbow */ + dev->wiphy->bands[IEEE80211_BAND_2GHZ] = &band_2GHz; + break; + default: + printk(KERN_ERR "%s: unsupported RF-Chip\n", + wiphy_name(dev->wiphy)); + err = -EINVAL; + goto err; + } + + if (!is_valid_ether_addr(dev->wiphy->perm_addr)) { + u8 perm_addr[ETH_ALEN]; + + printk(KERN_WARNING "%s: Invalid hwaddr! Using randomly generated MAC addr\n", + wiphy_name(dev->wiphy)); + random_ether_addr(perm_addr); + SET_IEEE80211_PERM_ADDR(dev, perm_addr); + } + + printk(KERN_INFO "%s: hwaddr %s, MAC:isl38%02x RF:%s\n", + wiphy_name(dev->wiphy), + print_mac(mac, dev->wiphy->perm_addr), + priv->version, p54_rf_chips[priv->rxhw]); + return 0; err: @@ -335,25 +424,12 @@ int p54_parse_eeprom(struct ieee80211_hw *dev, void *eeprom, int len) } EXPORT_SYMBOL_GPL(p54_parse_eeprom); -void p54_fill_eeprom_readback(struct p54_control_hdr *hdr) -{ - struct p54_eeprom_lm86 *eeprom_hdr; - - hdr->magic1 = cpu_to_le16(0x8000); - hdr->len = cpu_to_le16(sizeof(*eeprom_hdr) + 0x2000); - hdr->type = cpu_to_le16(P54_CONTROL_TYPE_EEPROM_READBACK); - hdr->retry1 = hdr->retry2 = 0; - eeprom_hdr = (struct p54_eeprom_lm86 *) hdr->data; - eeprom_hdr->offset = 0x0; - eeprom_hdr->len = cpu_to_le16(0x2000); -} -EXPORT_SYMBOL_GPL(p54_fill_eeprom_readback); - -static void p54_rx_data(struct ieee80211_hw *dev, struct sk_buff *skb) +static int p54_rx_data(struct ieee80211_hw *dev, struct sk_buff *skb) { struct p54_rx_hdr *hdr = (struct p54_rx_hdr *) skb->data; struct ieee80211_rx_status rx_status = {0}; u16 freq = le16_to_cpu(hdr->freq); + size_t header_len = sizeof(*hdr); rx_status.signal = hdr->rssi; /* XX correct? */ @@ -365,10 +441,15 @@ static void p54_rx_data(struct ieee80211_hw *dev, struct sk_buff *skb) rx_status.mactime = le64_to_cpu(hdr->timestamp); rx_status.flag |= RX_FLAG_TSFT; - skb_pull(skb, sizeof(*hdr)); + if (hdr->magic & cpu_to_le16(0x4000)) + header_len += hdr->align[0]; + + skb_pull(skb, header_len); skb_trim(skb, le16_to_cpu(hdr->len)); ieee80211_rx_irqsafe(dev, skb, &rx_status); + + return -1; } static void inline p54_wake_free_queues(struct ieee80211_hw *dev) @@ -377,7 +458,7 @@ static void inline p54_wake_free_queues(struct ieee80211_hw *dev) int i; for (i = 0; i < dev->queues; i++) - if (priv->tx_stats[i].len < priv->tx_stats[i].limit) + if (priv->tx_stats[i + 4].len < priv->tx_stats[i + 4].limit) ieee80211_wake_queue(dev, i); } @@ -387,11 +468,13 @@ static void p54_rx_frame_sent(struct ieee80211_hw *dev, struct sk_buff *skb) struct p54_control_hdr *hdr = (struct p54_control_hdr *) skb->data; struct p54_frame_sent_hdr *payload = (struct p54_frame_sent_hdr *) hdr->data; struct sk_buff *entry = (struct sk_buff *) priv->tx_queue.next; - u32 addr = le32_to_cpu(hdr->req_id) - 0x70; + u32 addr = le32_to_cpu(hdr->req_id) - priv->headroom; struct memrecord *range = NULL; u32 freed = 0; u32 last_addr = priv->rx_start; + unsigned long flags; + spin_lock_irqsave(&priv->tx_queue.lock, flags); while (entry != (struct sk_buff *)&priv->tx_queue) { struct ieee80211_tx_info *info = IEEE80211_SKB_CB(entry); range = (void *)info->driver_data; @@ -412,13 +495,15 @@ static void p54_rx_frame_sent(struct ieee80211_hw *dev, struct sk_buff *skb) last_addr = range->end_addr; __skb_unlink(entry, &priv->tx_queue); + spin_unlock_irqrestore(&priv->tx_queue.lock, flags); + memset(&info->status, 0, sizeof(info->status)); entry_hdr = (struct p54_control_hdr *) entry->data; entry_data = (struct p54_tx_control_allocdata *) entry_hdr->data; if ((entry_hdr->magic1 & cpu_to_le16(0x4000)) != 0) pad = entry_data->align[0]; - priv->tx_stats[entry_data->hw_queue - 4].len--; + priv->tx_stats[entry_data->hw_queue].len--; if (!(info->flags & IEEE80211_TX_CTL_NO_ACK)) { if (!(payload->status & 0x01)) info->flags |= IEEE80211_TX_STAT_ACK; @@ -429,18 +514,35 @@ static void p54_rx_frame_sent(struct ieee80211_hw *dev, struct sk_buff *skb) info->status.ack_signal = le16_to_cpu(payload->ack_rssi); skb_pull(entry, sizeof(*hdr) + pad + sizeof(*entry_data)); ieee80211_tx_status_irqsafe(dev, entry); - break; + goto out; } else last_addr = range->end_addr; entry = entry->next; } + spin_unlock_irqrestore(&priv->tx_queue.lock, flags); +out: if (freed >= IEEE80211_MAX_RTS_THRESHOLD + 0x170 + sizeof(struct p54_control_hdr)) p54_wake_free_queues(dev); } -static void p54_rx_control(struct ieee80211_hw *dev, struct sk_buff *skb) +static void p54_rx_eeprom_readback(struct ieee80211_hw *dev, + struct sk_buff *skb) +{ + struct p54_control_hdr *hdr = (struct p54_control_hdr *) skb->data; + struct p54_eeprom_lm86 *eeprom = (struct p54_eeprom_lm86 *) hdr->data; + struct p54_common *priv = dev->priv; + + if (!priv->eeprom) + return ; + + memcpy(priv->eeprom, eeprom->data, eeprom->len); + + complete(&priv->eeprom_comp); +} + +static int p54_rx_control(struct ieee80211_hw *dev, struct sk_buff *skb) { struct p54_control_hdr *hdr = (struct p54_control_hdr *) skb->data; @@ -450,36 +552,27 @@ static void p54_rx_control(struct ieee80211_hw *dev, struct sk_buff *skb) break; case P54_CONTROL_TYPE_BBP: break; + case P54_CONTROL_TYPE_EEPROM_READBACK: + p54_rx_eeprom_readback(dev, skb); + break; default: printk(KERN_DEBUG "%s: not handling 0x%02x type control frame\n", wiphy_name(dev->wiphy), le16_to_cpu(hdr->type)); break; } + + return 0; } /* returns zero if skb can be reused */ int p54_rx(struct ieee80211_hw *dev, struct sk_buff *skb) { u8 type = le16_to_cpu(*((__le16 *)skb->data)) >> 8; - switch (type) { - case 0x00: - case 0x01: - p54_rx_data(dev, skb); - return -1; - case 0x4d: - /* TODO: do something better... but then again, I've never seen this happen */ - printk(KERN_ERR "%s: Received fault. Probably need to restart hardware now..\n", - wiphy_name(dev->wiphy)); - break; - case 0x80: - p54_rx_control(dev, skb); - break; - default: - printk(KERN_ERR "%s: unknown frame RXed (0x%02x)\n", - wiphy_name(dev->wiphy), type); - break; - } - return 0; + + if (type == 0x80) + return p54_rx_control(dev, skb); + else + return p54_rx_data(dev, skb); } EXPORT_SYMBOL_GPL(p54_rx); @@ -503,7 +596,7 @@ static void p54_assign_address(struct ieee80211_hw *dev, struct sk_buff *skb, u32 target_addr = priv->rx_start; unsigned long flags; unsigned int left; - len = (len + 0x170 + 3) & ~0x3; /* 0x70 headroom, 0x100 tailroom */ + len = (len + priv->headroom + priv->tailroom + 3) & ~0x3; spin_lock_irqsave(&priv->tx_queue.lock, flags); left = skb_queue_len(&priv->tx_queue); @@ -538,14 +631,73 @@ static void p54_assign_address(struct ieee80211_hw *dev, struct sk_buff *skb, range->start_addr = target_addr; range->end_addr = target_addr + len; __skb_queue_after(&priv->tx_queue, target_skb, skb); - if (largest_hole < IEEE80211_MAX_RTS_THRESHOLD + 0x170 + + if (largest_hole < priv->rx_mtu + priv->headroom + + priv->tailroom + sizeof(struct p54_control_hdr)) ieee80211_stop_queues(dev); } spin_unlock_irqrestore(&priv->tx_queue.lock, flags); - data->req_id = cpu_to_le32(target_addr + 0x70); + data->req_id = cpu_to_le32(target_addr + priv->headroom); +} + +int p54_read_eeprom(struct ieee80211_hw *dev) +{ + struct p54_common *priv = dev->priv; + struct p54_control_hdr *hdr = NULL; + struct p54_eeprom_lm86 *eeprom_hdr; + size_t eeprom_size = 0x2020, offset = 0, blocksize; + int ret = -ENOMEM; + void *eeprom = NULL; + + hdr = (struct p54_control_hdr *)kzalloc(sizeof(*hdr) + + sizeof(*eeprom_hdr) + EEPROM_READBACK_LEN, GFP_KERNEL); + if (!hdr) + goto free; + + priv->eeprom = kzalloc(EEPROM_READBACK_LEN, GFP_KERNEL); + if (!priv->eeprom) + goto free; + + eeprom = kzalloc(eeprom_size, GFP_KERNEL); + if (!eeprom) + goto free; + + hdr->magic1 = cpu_to_le16(0x8000); + hdr->type = cpu_to_le16(P54_CONTROL_TYPE_EEPROM_READBACK); + hdr->retry1 = hdr->retry2 = 0; + eeprom_hdr = (struct p54_eeprom_lm86 *) hdr->data; + + while (eeprom_size) { + blocksize = min(eeprom_size, (size_t)EEPROM_READBACK_LEN); + hdr->len = cpu_to_le16(blocksize + sizeof(*eeprom_hdr)); + eeprom_hdr->offset = cpu_to_le16(offset); + eeprom_hdr->len = cpu_to_le16(blocksize); + p54_assign_address(dev, NULL, hdr, hdr->len + sizeof(*hdr)); + priv->tx(dev, hdr, hdr->len + sizeof(*hdr), 0); + + if (!wait_for_completion_interruptible_timeout(&priv->eeprom_comp, HZ)) { + printk(KERN_ERR "%s: device does not respond!\n", + wiphy_name(dev->wiphy)); + ret = -EBUSY; + goto free; + } + + memcpy(eeprom + offset, priv->eeprom, blocksize); + offset += blocksize; + eeprom_size -= blocksize; + } + + ret = p54_parse_eeprom(dev, eeprom, offset); +free: + kfree(priv->eeprom); + priv->eeprom = NULL; + kfree(hdr); + kfree(eeprom); + + return ret; } +EXPORT_SYMBOL_GPL(p54_read_eeprom); static int p54_tx(struct ieee80211_hw *dev, struct sk_buff *skb) { @@ -559,7 +711,7 @@ static int p54_tx(struct ieee80211_hw *dev, struct sk_buff *skb) u8 rate; u8 cts_rate = 0x20; - current_queue = &priv->tx_stats[skb_get_queue_mapping(skb)]; + current_queue = &priv->tx_stats[skb_get_queue_mapping(skb) + 4]; if (unlikely(current_queue->len > current_queue->limit)) return NETDEV_TX_BUSY; current_queue->len++; @@ -628,12 +780,12 @@ static int p54_tx(struct ieee80211_hw *dev, struct sk_buff *skb) } static int p54_set_filter(struct ieee80211_hw *dev, u16 filter_type, - const u8 *dst, const u8 *src, u8 antenna, - u32 magic3, u32 magic8, u32 magic9) + const u8 *bssid) { struct p54_common *priv = dev->priv; struct p54_control_hdr *hdr; struct p54_tx_control_filter *filter; + size_t data_len; hdr = kzalloc(sizeof(*hdr) + sizeof(*filter) + priv->tx_hdr_len, GFP_ATOMIC); @@ -644,25 +796,35 @@ static int p54_set_filter(struct ieee80211_hw *dev, u16 filter_type, filter = (struct p54_tx_control_filter *) hdr->data; hdr->magic1 = cpu_to_le16(0x8001); - hdr->len = cpu_to_le16(sizeof(*filter)); - p54_assign_address(dev, NULL, hdr, sizeof(*hdr) + sizeof(*filter)); hdr->type = cpu_to_le16(P54_CONTROL_TYPE_FILTER_SET); - filter->filter_type = cpu_to_le16(filter_type); - memcpy(filter->dst, dst, ETH_ALEN); - if (!src) - memset(filter->src, ~0, ETH_ALEN); + priv->filter_type = filter->filter_type = cpu_to_le16(filter_type); + memcpy(filter->mac_addr, priv->mac_addr, ETH_ALEN); + if (!bssid) + memset(filter->bssid, ~0, ETH_ALEN); else - memcpy(filter->src, src, ETH_ALEN); - filter->antenna = antenna; - filter->magic3 = cpu_to_le32(magic3); - filter->rx_addr = cpu_to_le32(priv->rx_end); - filter->max_rx = cpu_to_le16(0x0620); /* FIXME: for usb ver 1.. maybe */ - filter->rxhw = priv->rxhw; - filter->magic8 = cpu_to_le16(magic8); - filter->magic9 = cpu_to_le16(magic9); - - priv->tx(dev, hdr, sizeof(*hdr) + sizeof(*filter), 1); + memcpy(filter->bssid, bssid, ETH_ALEN); + + filter->rx_antenna = priv->rx_antenna; + + if (priv->fw_var < 0x500) { + data_len = P54_TX_CONTROL_FILTER_V1_LEN; + filter->v1.basic_rate_mask = cpu_to_le32(0x15F); + filter->v1.rx_addr = cpu_to_le32(priv->rx_end); + filter->v1.max_rx = cpu_to_le16(priv->rx_mtu); + filter->v1.rxhw = cpu_to_le16(priv->rxhw); + filter->v1.wakeup_timer = cpu_to_le16(500); + } else { + data_len = P54_TX_CONTROL_FILTER_V2_LEN; + filter->v2.rx_addr = cpu_to_le32(priv->rx_end); + filter->v2.max_rx = cpu_to_le16(priv->rx_mtu); + filter->v2.rxhw = cpu_to_le16(priv->rxhw); + filter->v2.timer = cpu_to_le16(1000); + } + + hdr->len = cpu_to_le16(data_len); + p54_assign_address(dev, NULL, hdr, sizeof(*hdr) + data_len); + priv->tx(dev, hdr, sizeof(*hdr) + data_len, 1); return 0; } @@ -672,12 +834,10 @@ static int p54_set_freq(struct ieee80211_hw *dev, __le16 freq) struct p54_control_hdr *hdr; struct p54_tx_control_channel *chan; unsigned int i; - size_t payload_len = sizeof(*chan) + sizeof(u32)*2 + - sizeof(*chan->curve_data) * - priv->curve_data->points_per_channel; + size_t data_len; void *entry; - hdr = kzalloc(sizeof(*hdr) + payload_len + + hdr = kzalloc(sizeof(*hdr) + sizeof(*chan) + priv->tx_hdr_len, GFP_KERNEL); if (!hdr) return -ENOMEM; @@ -687,12 +847,11 @@ static int p54_set_freq(struct ieee80211_hw *dev, __le16 freq) chan = (struct p54_tx_control_channel *) hdr->data; hdr->magic1 = cpu_to_le16(0x8001); - hdr->len = cpu_to_le16(sizeof(*chan)); + hdr->type = cpu_to_le16(P54_CONTROL_TYPE_CHANNEL_CHANGE); - p54_assign_address(dev, NULL, hdr, sizeof(*hdr) + payload_len); - chan->magic1 = cpu_to_le16(0x1); - chan->magic2 = cpu_to_le16(0x0); + chan->flags = cpu_to_le16(0x1); + chan->dwell = cpu_to_le16(0x0); for (i = 0; i < priv->iq_autocal_len; i++) { if (priv->iq_autocal[i].freq != freq) @@ -710,35 +869,51 @@ static int p54_set_freq(struct ieee80211_hw *dev, __le16 freq) continue; chan->val_barker = 0x38; - chan->val_bpsk = priv->output_limit[i].val_bpsk; - chan->val_qpsk = priv->output_limit[i].val_qpsk; - chan->val_16qam = priv->output_limit[i].val_16qam; - chan->val_64qam = priv->output_limit[i].val_64qam; + chan->val_bpsk = chan->dup_bpsk = + priv->output_limit[i].val_bpsk; + chan->val_qpsk = chan->dup_qpsk = + priv->output_limit[i].val_qpsk; + chan->val_16qam = chan->dup_16qam = + priv->output_limit[i].val_16qam; + chan->val_64qam = chan->dup_64qam = + priv->output_limit[i].val_64qam; break; } if (i == priv->output_limit_len) goto err; - chan->pa_points_per_curve = priv->curve_data->points_per_channel; - entry = priv->curve_data->data; for (i = 0; i < priv->curve_data->channels; i++) { if (*((__le16 *)entry) != freq) { entry += sizeof(__le16); - entry += sizeof(struct pda_pa_curve_data_sample_rev1) * - chan->pa_points_per_curve; + entry += sizeof(struct p54_pa_curve_data_sample) * + priv->curve_data->points_per_channel; continue; } entry += sizeof(__le16); + chan->pa_points_per_curve = + min(priv->curve_data->points_per_channel, (u8) 8); + memcpy(chan->curve_data, entry, sizeof(*chan->curve_data) * chan->pa_points_per_curve); break; } - memcpy(hdr->data + payload_len - 4, &chan->val_bpsk, 4); + if (priv->fw_var < 0x500) { + data_len = P54_TX_CONTROL_CHANNEL_V1_LEN; + chan->v1.rssical_mul = cpu_to_le16(130); + chan->v1.rssical_add = cpu_to_le16(0xfe70); + } else { + data_len = P54_TX_CONTROL_CHANNEL_V2_LEN; + chan->v2.rssical_mul = cpu_to_le16(130); + chan->v2.rssical_add = cpu_to_le16(0xfe70); + chan->v2.basic_rate_mask = cpu_to_le32(0x15f); + } - priv->tx(dev, hdr, sizeof(*hdr) + payload_len, 1); + hdr->len = cpu_to_le16(data_len); + p54_assign_address(dev, NULL, hdr, sizeof(*hdr) + data_len); + priv->tx(dev, hdr, sizeof(*hdr) + data_len, 1); return 0; err: @@ -883,12 +1058,11 @@ static int p54_add_interface(struct ieee80211_hw *dev, memcpy(priv->mac_addr, conf->mac_addr, ETH_ALEN); - p54_set_filter(dev, 0, priv->mac_addr, NULL, 0, 1, 0, 0xF642); - p54_set_filter(dev, 0, priv->mac_addr, NULL, 1, 0, 0, 0xF642); + p54_set_filter(dev, 0, NULL); switch (conf->type) { case IEEE80211_IF_TYPE_STA: - p54_set_filter(dev, 1, priv->mac_addr, NULL, 0, 0x15F, 0x1F4, 0); + p54_set_filter(dev, 1, NULL); break; default: BUG(); /* impossible */ @@ -906,7 +1080,7 @@ static void p54_remove_interface(struct ieee80211_hw *dev, struct p54_common *priv = dev->priv; priv->mode = IEEE80211_IF_TYPE_MNTR; memset(priv->mac_addr, 0, ETH_ALEN); - p54_set_filter(dev, 0, priv->mac_addr, NULL, 2, 0, 0, 0); + p54_set_filter(dev, 0, NULL); } static int p54_config(struct ieee80211_hw *dev, struct ieee80211_conf *conf) @@ -915,6 +1089,8 @@ static int p54_config(struct ieee80211_hw *dev, struct ieee80211_conf *conf) struct p54_common *priv = dev->priv; mutex_lock(&priv->conf_mutex); + priv->rx_antenna = (conf->antenna_sel_rx == 0) ? + 2 : conf->antenna_sel_tx - 1; ret = p54_set_freq(dev, cpu_to_le16(conf->channel->center_freq)); p54_set_vdcf(dev); mutex_unlock(&priv->conf_mutex); @@ -928,8 +1104,7 @@ static int p54_config_interface(struct ieee80211_hw *dev, struct p54_common *priv = dev->priv; mutex_lock(&priv->conf_mutex); - p54_set_filter(dev, 0, priv->mac_addr, conf->bssid, 0, 1, 0, 0xF642); - p54_set_filter(dev, 0, priv->mac_addr, conf->bssid, 2, 0, 0, 0); + p54_set_filter(dev, 0, conf->bssid); p54_set_leds(dev, 1, !is_multicast_ether_addr(conf->bssid), 0); memcpy(priv->bssid, conf->bssid, ETH_ALEN); mutex_unlock(&priv->conf_mutex); @@ -947,11 +1122,9 @@ static void p54_configure_filter(struct ieee80211_hw *dev, if (changed_flags & FIF_BCN_PRBRESP_PROMISC) { if (*total_flags & FIF_BCN_PRBRESP_PROMISC) - p54_set_filter(dev, 0, priv->mac_addr, - NULL, 2, 0, 0, 0); + p54_set_filter(dev, 0, NULL); else - p54_set_filter(dev, 0, priv->mac_addr, - priv->bssid, 2, 0, 0, 0); + p54_set_filter(dev, 0, priv->bssid); } } @@ -987,7 +1160,7 @@ static int p54_get_tx_stats(struct ieee80211_hw *dev, { struct p54_common *priv = dev->priv; - memcpy(stats, &priv->tx_stats, sizeof(stats[0]) * dev->queues); + memcpy(stats, &priv->tx_stats[4], sizeof(stats[0]) * dev->queues); return 0; } @@ -1018,20 +1191,26 @@ struct ieee80211_hw *p54_init_common(size_t priv_data_len) priv = dev->priv; priv->mode = IEEE80211_IF_TYPE_INVALID; skb_queue_head_init(&priv->tx_queue); - dev->wiphy->bands[IEEE80211_BAND_2GHZ] = &band_2GHz; dev->flags = IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING | /* not sure */ IEEE80211_HW_RX_INCLUDES_FCS | IEEE80211_HW_SIGNAL_UNSPEC; + + dev->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION); + dev->channel_change_time = 1000; /* TODO: find actual value */ dev->max_signal = 127; - priv->tx_stats[0].limit = 5; + priv->tx_stats[0].limit = 1; + priv->tx_stats[1].limit = 1; + priv->tx_stats[2].limit = 1; + priv->tx_stats[3].limit = 1; + priv->tx_stats[4].limit = 5; dev->queues = 1; - dev->extra_tx_headroom = sizeof(struct p54_control_hdr) + 4 + sizeof(struct p54_tx_control_allocdata); mutex_init(&priv->conf_mutex); + init_completion(&priv->eeprom_comp); return dev; } diff --git a/drivers/net/wireless/p54/p54common.h b/drivers/net/wireless/p54/p54common.h index 8db6c0e8e54..73a9a2c923d 100644 --- a/drivers/net/wireless/p54/p54common.h +++ b/drivers/net/wireless/p54/p54common.h @@ -1,5 +1,5 @@ -#ifndef PRISM54COMMON_H -#define PRISM54COMMON_H +#ifndef P54COMMON_H +#define P54COMMON_H /* * Common code specific definitions for mac80211 Prism54 drivers @@ -29,6 +29,17 @@ struct bootrec_exp_if { __le16 top_compat; } __attribute__((packed)); +struct bootrec_desc { + __le16 modes; + __le16 flags; + __le32 rx_start; + __le32 rx_end; + u8 headroom; + u8 tailroom; + u8 unimportant[6]; + u8 rates[16]; +} __attribute__((packed)); + #define BR_CODE_MIN 0x80000000 #define BR_CODE_COMPONENT_ID 0x80000001 #define BR_CODE_COMPONENT_VERSION 0x80000002 @@ -39,11 +50,6 @@ struct bootrec_exp_if { #define BR_CODE_END_OF_BRA 0xFF0000FF #define LEGACY_BR_CODE_END_OF_BRA 0xFFFFFFFF -#define FW_FMAC 0x464d4143 -#define FW_LM86 0x4c4d3836 -#define FW_LM87 0x4c4d3837 -#define FW_LM20 0x4c4d3230 - /* PDA defines are Copyright (C) 2005 Nokia Corporation (taken from islsm_pda.h) */ struct pda_entry { @@ -89,6 +95,16 @@ struct pda_pa_curve_data_sample_rev1 { u8 data_qpsk; u8 data_16qam; u8 data_64qam; +} __attribute__ ((packed)); + +struct p54_pa_curve_data_sample { + u8 rf_power; + u8 pa_detector; + u8 data_barker; + u8 data_bpsk; + u8 data_qpsk; + u8 data_16qam; + u8 data_64qam; u8 padding; } __attribute__ ((packed)); @@ -170,7 +186,7 @@ struct p54_rx_hdr { u8 quality; u16 unknown2; __le64 timestamp; - u8 data[0]; + u8 align[0]; } __attribute__ ((packed)); struct p54_frame_sent_hdr { @@ -198,22 +214,37 @@ struct p54_tx_control_allocdata { struct p54_tx_control_filter { __le16 filter_type; - u8 dst[ETH_ALEN]; - u8 src[ETH_ALEN]; - u8 antenna; - u8 debug; - __le32 magic3; - u8 rates[8]; // FIXME: what's this for? - __le32 rx_addr; - __le16 max_rx; - __le16 rxhw; - __le16 magic8; - __le16 magic9; + u8 mac_addr[ETH_ALEN]; + u8 bssid[ETH_ALEN]; + u8 rx_antenna; + u8 rx_align; + union { + struct { + __le32 basic_rate_mask; + u8 rts_rates[8]; + __le32 rx_addr; + __le16 max_rx; + __le16 rxhw; + __le16 wakeup_timer; + __le16 unalloc0; + } v1 __attribute__ ((packed)); + struct { + __le32 rx_addr; + __le16 max_rx; + __le16 rxhw; + __le16 timer; + __le16 unalloc0; + __le32 unalloc1; + } v2 __attribute__ ((packed)); + } __attribute__ ((packed)); } __attribute__ ((packed)); +#define P54_TX_CONTROL_FILTER_V1_LEN (sizeof(struct p54_tx_control_filter)) +#define P54_TX_CONTROL_FILTER_V2_LEN (sizeof(struct p54_tx_control_filter)-8) + struct p54_tx_control_channel { - __le16 magic1; - __le16 magic2; + __le16 flags; + __le16 dwell; u8 padding1[20]; struct pda_iq_autocal_entry iq_autocal; u8 pa_points_per_curve; @@ -222,10 +253,29 @@ struct p54_tx_control_channel { u8 val_qpsk; u8 val_16qam; u8 val_64qam; - struct pda_pa_curve_data_sample_rev1 curve_data[0]; - /* additional padding/data after curve_data */ + struct p54_pa_curve_data_sample curve_data[8]; + u8 dup_bpsk; + u8 dup_qpsk; + u8 dup_16qam; + u8 dup_64qam; + union { + struct { + __le16 rssical_mul; + __le16 rssical_add; + } v1 __attribute__ ((packed)); + + struct { + __le32 basic_rate_mask; + u8 rts_rates[8]; + __le16 rssical_mul; + __le16 rssical_add; + } v2 __attribute__ ((packed)); + } __attribute__ ((packed)); } __attribute__ ((packed)); +#define P54_TX_CONTROL_CHANNEL_V1_LEN (sizeof(struct p54_tx_control_channel)-12) +#define P54_TX_CONTROL_CHANNEL_V2_LEN (sizeof(struct p54_tx_control_channel)) + struct p54_tx_control_led { __le16 mode; __le16 led_temporary; @@ -250,4 +300,4 @@ struct p54_tx_control_vdcf { __le16 frameburst; } __attribute__ ((packed)); -#endif /* PRISM54COMMON_H */ +#endif /* P54COMMON_H */ diff --git a/drivers/net/wireless/p54/p54pci.c b/drivers/net/wireless/p54/p54pci.c index 7dd4add4bf4..1594786205f 100644 --- a/drivers/net/wireless/p54/p54pci.c +++ b/drivers/net/wireless/p54/p54pci.c @@ -3,6 +3,7 @@ * Linux device driver for PCI based Prism54 * * Copyright (c) 2006, Michael Wu <flamingice@sourmilk.net> + * Copyright (c) 2008, Christian Lamparter <chunkeey@web.de> * * Based on the islsm (softmac prism54) driver, which is: * Copyright 2004-2006 Jean-Baptiste Note <jean-baptiste.note@m4x.org>, et al. @@ -71,16 +72,18 @@ static int p54p_upload_firmware(struct ieee80211_hw *dev) P54P_WRITE(ctrl_stat, reg); wmb(); - mdelay(50); - err = request_firmware(&fw_entry, "isl3886", &priv->pdev->dev); if (err) { - printk(KERN_ERR "%s (prism54pci): cannot find firmware " + printk(KERN_ERR "%s (p54pci): cannot find firmware " "(isl3886)\n", pci_name(priv->pdev)); return err; } - p54_parse_firmware(dev, fw_entry); + err = p54_parse_firmware(dev, fw_entry); + if (err) { + release_firmware(fw_entry); + return err; + } data = (__le32 *) fw_entry->data; remains = fw_entry->size; @@ -121,162 +124,147 @@ static int p54p_upload_firmware(struct ieee80211_hw *dev) wmb(); udelay(10); + /* wait for the firmware to boot properly */ + mdelay(100); + return 0; } -static irqreturn_t p54p_simple_interrupt(int irq, void *dev_id) +static void p54p_refill_rx_ring(struct ieee80211_hw *dev, + int ring_index, struct p54p_desc *ring, u32 ring_limit, + struct sk_buff **rx_buf) { - struct p54p_priv *priv = (struct p54p_priv *) dev_id; - __le32 reg; - - reg = P54P_READ(int_ident); - P54P_WRITE(int_ack, reg); + struct p54p_priv *priv = dev->priv; + struct p54p_ring_control *ring_control = priv->ring_control; + u32 limit, idx, i; - if (reg & P54P_READ(int_enable)) - complete(&priv->boot_comp); + idx = le32_to_cpu(ring_control->host_idx[ring_index]); + limit = idx; + limit -= le32_to_cpu(ring_control->device_idx[ring_index]); + limit = ring_limit - limit; - return IRQ_HANDLED; -} + i = idx % ring_limit; + while (limit-- > 1) { + struct p54p_desc *desc = &ring[i]; -static int p54p_read_eeprom(struct ieee80211_hw *dev) -{ - struct p54p_priv *priv = dev->priv; - struct p54p_ring_control *ring_control = priv->ring_control; - int err; - struct p54_control_hdr *hdr; - void *eeprom; - dma_addr_t rx_mapping, tx_mapping; - u16 alen; + if (!desc->host_addr) { + struct sk_buff *skb; + dma_addr_t mapping; + skb = dev_alloc_skb(priv->common.rx_mtu + 32); + if (!skb) + break; - init_completion(&priv->boot_comp); - err = request_irq(priv->pdev->irq, &p54p_simple_interrupt, - IRQF_SHARED, "prism54pci", priv); - if (err) { - printk(KERN_ERR "%s (prism54pci): failed to register IRQ handler\n", - pci_name(priv->pdev)); - return err; - } + mapping = pci_map_single(priv->pdev, + skb_tail_pointer(skb), + priv->common.rx_mtu + 32, + PCI_DMA_FROMDEVICE); + desc->host_addr = cpu_to_le32(mapping); + desc->device_addr = 0; // FIXME: necessary? + desc->len = cpu_to_le16(priv->common.rx_mtu + 32); + desc->flags = 0; + rx_buf[i] = skb; + } - eeprom = kmalloc(0x2010 + EEPROM_READBACK_LEN, GFP_KERNEL); - if (!eeprom) { - printk(KERN_ERR "%s (prism54pci): no memory for eeprom!\n", - pci_name(priv->pdev)); - err = -ENOMEM; - goto out; + i++; + idx++; + i %= ring_limit; } - memset(ring_control, 0, sizeof(*ring_control)); - P54P_WRITE(ring_control_base, cpu_to_le32(priv->ring_control_dma)); - P54P_READ(ring_control_base); - udelay(10); - - P54P_WRITE(int_enable, cpu_to_le32(ISL38XX_INT_IDENT_INIT)); - P54P_READ(int_enable); - udelay(10); + wmb(); + ring_control->host_idx[ring_index] = cpu_to_le32(idx); +} - P54P_WRITE(dev_int, cpu_to_le32(ISL38XX_DEV_INT_RESET)); +static void p54p_check_rx_ring(struct ieee80211_hw *dev, u32 *index, + int ring_index, struct p54p_desc *ring, u32 ring_limit, + struct sk_buff **rx_buf) +{ + struct p54p_priv *priv = dev->priv; + struct p54p_ring_control *ring_control = priv->ring_control; + struct p54p_desc *desc; + u32 idx, i; + + i = (*index) % ring_limit; + (*index) = idx = le32_to_cpu(ring_control->device_idx[ring_index]); + idx %= ring_limit; + while (i != idx) { + u16 len; + struct sk_buff *skb; + desc = &ring[i]; + len = le16_to_cpu(desc->len); + skb = rx_buf[i]; + + if (!skb) { + i++; + i %= ring_limit; + continue; + } + skb_put(skb, len); + + if (p54_rx(dev, skb)) { + pci_unmap_single(priv->pdev, + le32_to_cpu(desc->host_addr), + priv->common.rx_mtu + 32, + PCI_DMA_FROMDEVICE); + rx_buf[i] = NULL; + desc->host_addr = 0; + } else { + skb_trim(skb, 0); + desc->len = cpu_to_le16(priv->common.rx_mtu + 32); + } - if (!wait_for_completion_interruptible_timeout(&priv->boot_comp, HZ)) { - printk(KERN_ERR "%s (prism54pci): Cannot boot firmware!\n", - pci_name(priv->pdev)); - err = -EINVAL; - goto out; + i++; + i %= ring_limit; } - P54P_WRITE(int_enable, cpu_to_le32(ISL38XX_INT_IDENT_UPDATE)); - P54P_READ(int_enable); + p54p_refill_rx_ring(dev, ring_index, ring, ring_limit, rx_buf); +} - hdr = eeprom + 0x2010; - p54_fill_eeprom_readback(hdr); - hdr->req_id = cpu_to_le32(priv->common.rx_start); +/* caller must hold priv->lock */ +static void p54p_check_tx_ring(struct ieee80211_hw *dev, u32 *index, + int ring_index, struct p54p_desc *ring, u32 ring_limit, + void **tx_buf) +{ + struct p54p_priv *priv = dev->priv; + struct p54p_ring_control *ring_control = priv->ring_control; + struct p54p_desc *desc; + u32 idx, i; - rx_mapping = pci_map_single(priv->pdev, eeprom, - 0x2010, PCI_DMA_FROMDEVICE); - tx_mapping = pci_map_single(priv->pdev, (void *)hdr, - EEPROM_READBACK_LEN, PCI_DMA_TODEVICE); + i = (*index) % ring_limit; + (*index) = idx = le32_to_cpu(ring_control->device_idx[1]); + idx %= ring_limit; - ring_control->rx_mgmt[0].host_addr = cpu_to_le32(rx_mapping); - ring_control->rx_mgmt[0].len = cpu_to_le16(0x2010); - ring_control->tx_data[0].host_addr = cpu_to_le32(tx_mapping); - ring_control->tx_data[0].device_addr = hdr->req_id; - ring_control->tx_data[0].len = cpu_to_le16(EEPROM_READBACK_LEN); + while (i != idx) { + desc = &ring[i]; + kfree(tx_buf[i]); + tx_buf[i] = NULL; - ring_control->host_idx[2] = cpu_to_le32(1); - ring_control->host_idx[1] = cpu_to_le32(1); + pci_unmap_single(priv->pdev, le32_to_cpu(desc->host_addr), + le16_to_cpu(desc->len), PCI_DMA_TODEVICE); - wmb(); - mdelay(100); - P54P_WRITE(dev_int, cpu_to_le32(ISL38XX_DEV_INT_UPDATE)); + desc->host_addr = 0; + desc->device_addr = 0; + desc->len = 0; + desc->flags = 0; - wait_for_completion_interruptible_timeout(&priv->boot_comp, HZ); - wait_for_completion_interruptible_timeout(&priv->boot_comp, HZ); - - pci_unmap_single(priv->pdev, tx_mapping, - EEPROM_READBACK_LEN, PCI_DMA_TODEVICE); - pci_unmap_single(priv->pdev, rx_mapping, - 0x2010, PCI_DMA_FROMDEVICE); - - alen = le16_to_cpu(ring_control->rx_mgmt[0].len); - if (le32_to_cpu(ring_control->device_idx[2]) != 1 || - alen < 0x10) { - printk(KERN_ERR "%s (prism54pci): Cannot read eeprom!\n", - pci_name(priv->pdev)); - err = -EINVAL; - goto out; + i++; + i %= ring_limit; } - - p54_parse_eeprom(dev, (u8 *)eeprom + 0x10, alen - 0x10); - - out: - kfree(eeprom); - P54P_WRITE(int_enable, cpu_to_le32(0)); - P54P_READ(int_enable); - udelay(10); - free_irq(priv->pdev->irq, priv); - P54P_WRITE(dev_int, cpu_to_le32(ISL38XX_DEV_INT_RESET)); - return err; } -static void p54p_refill_rx_ring(struct ieee80211_hw *dev) +static void p54p_rx_tasklet(unsigned long dev_id) { + struct ieee80211_hw *dev = (struct ieee80211_hw *)dev_id; struct p54p_priv *priv = dev->priv; struct p54p_ring_control *ring_control = priv->ring_control; - u32 limit, host_idx, idx; - host_idx = le32_to_cpu(ring_control->host_idx[0]); - limit = host_idx; - limit -= le32_to_cpu(ring_control->device_idx[0]); - limit = ARRAY_SIZE(ring_control->rx_data) - limit; - - idx = host_idx % ARRAY_SIZE(ring_control->rx_data); - while (limit-- > 1) { - struct p54p_desc *desc = &ring_control->rx_data[idx]; - - if (!desc->host_addr) { - struct sk_buff *skb; - dma_addr_t mapping; - skb = dev_alloc_skb(MAX_RX_SIZE); - if (!skb) - break; - - mapping = pci_map_single(priv->pdev, - skb_tail_pointer(skb), - MAX_RX_SIZE, - PCI_DMA_FROMDEVICE); - desc->host_addr = cpu_to_le32(mapping); - desc->device_addr = 0; // FIXME: necessary? - desc->len = cpu_to_le16(MAX_RX_SIZE); - desc->flags = 0; - priv->rx_buf[idx] = skb; - } + p54p_check_rx_ring(dev, &priv->rx_idx_mgmt, 2, ring_control->rx_mgmt, + ARRAY_SIZE(ring_control->rx_mgmt), priv->rx_buf_mgmt); - idx++; - host_idx++; - idx %= ARRAY_SIZE(ring_control->rx_data); - } + p54p_check_rx_ring(dev, &priv->rx_idx_data, 0, ring_control->rx_data, + ARRAY_SIZE(ring_control->rx_data), priv->rx_buf_data); wmb(); - ring_control->host_idx[0] = cpu_to_le32(host_idx); + P54P_WRITE(dev_int, cpu_to_le32(ISL38XX_DEV_INT_UPDATE)); } static irqreturn_t p54p_interrupt(int irq, void *dev_id) @@ -298,65 +286,18 @@ static irqreturn_t p54p_interrupt(int irq, void *dev_id) reg &= P54P_READ(int_enable); if (reg & cpu_to_le32(ISL38XX_INT_IDENT_UPDATE)) { - struct p54p_desc *desc; - u32 idx, i; - i = priv->tx_idx; - i %= ARRAY_SIZE(ring_control->tx_data); - priv->tx_idx = idx = le32_to_cpu(ring_control->device_idx[1]); - idx %= ARRAY_SIZE(ring_control->tx_data); - - while (i != idx) { - desc = &ring_control->tx_data[i]; - if (priv->tx_buf[i]) { - kfree(priv->tx_buf[i]); - priv->tx_buf[i] = NULL; - } - - pci_unmap_single(priv->pdev, le32_to_cpu(desc->host_addr), - le16_to_cpu(desc->len), PCI_DMA_TODEVICE); - - desc->host_addr = 0; - desc->device_addr = 0; - desc->len = 0; - desc->flags = 0; - - i++; - i %= ARRAY_SIZE(ring_control->tx_data); - } - - i = priv->rx_idx; - i %= ARRAY_SIZE(ring_control->rx_data); - priv->rx_idx = idx = le32_to_cpu(ring_control->device_idx[0]); - idx %= ARRAY_SIZE(ring_control->rx_data); - while (i != idx) { - u16 len; - struct sk_buff *skb; - desc = &ring_control->rx_data[i]; - len = le16_to_cpu(desc->len); - skb = priv->rx_buf[i]; + p54p_check_tx_ring(dev, &priv->tx_idx_mgmt, + 3, ring_control->tx_mgmt, + ARRAY_SIZE(ring_control->tx_mgmt), + priv->tx_buf_mgmt); - skb_put(skb, len); + p54p_check_tx_ring(dev, &priv->tx_idx_data, + 1, ring_control->tx_data, + ARRAY_SIZE(ring_control->tx_data), + priv->tx_buf_data); - if (p54_rx(dev, skb)) { - pci_unmap_single(priv->pdev, - le32_to_cpu(desc->host_addr), - MAX_RX_SIZE, PCI_DMA_FROMDEVICE); + tasklet_schedule(&priv->rx_tasklet); - priv->rx_buf[i] = NULL; - desc->host_addr = 0; - } else { - skb_trim(skb, 0); - desc->len = cpu_to_le16(MAX_RX_SIZE); - } - - i++; - i %= ARRAY_SIZE(ring_control->rx_data); - } - - p54p_refill_rx_ring(dev); - - wmb(); - P54P_WRITE(dev_int, cpu_to_le32(ISL38XX_DEV_INT_UPDATE)); } else if (reg & cpu_to_le32(ISL38XX_INT_IDENT_INIT)) complete(&priv->boot_comp); @@ -392,7 +333,7 @@ static void p54p_tx(struct ieee80211_hw *dev, struct p54_control_hdr *data, ring_control->host_idx[1] = cpu_to_le32(idx + 1); if (free_on_tx) - priv->tx_buf[i] = data; + priv->tx_buf_data[i] = data; spin_unlock_irqrestore(&priv->lock, flags); @@ -412,7 +353,7 @@ static int p54p_open(struct ieee80211_hw *dev) init_completion(&priv->boot_comp); err = request_irq(priv->pdev->irq, &p54p_interrupt, - IRQF_SHARED, "prism54pci", dev); + IRQF_SHARED, "p54pci", dev); if (err) { printk(KERN_ERR "%s: failed to register IRQ handler\n", wiphy_name(dev->wiphy)); @@ -420,10 +361,19 @@ static int p54p_open(struct ieee80211_hw *dev) } memset(priv->ring_control, 0, sizeof(*priv->ring_control)); - priv->rx_idx = priv->tx_idx = 0; - p54p_refill_rx_ring(dev); + err = p54p_upload_firmware(dev); + if (err) { + free_irq(priv->pdev->irq, dev); + return err; + } + priv->rx_idx_data = priv->tx_idx_data = 0; + priv->rx_idx_mgmt = priv->tx_idx_mgmt = 0; + + p54p_refill_rx_ring(dev, 0, priv->ring_control->rx_data, + ARRAY_SIZE(priv->ring_control->rx_data), priv->rx_buf_data); - p54p_upload_firmware(dev); + p54p_refill_rx_ring(dev, 2, priv->ring_control->rx_mgmt, + ARRAY_SIZE(priv->ring_control->rx_mgmt), priv->rx_buf_mgmt); P54P_WRITE(ring_control_base, cpu_to_le32(priv->ring_control_dma)); P54P_READ(ring_control_base); @@ -465,6 +415,8 @@ static void p54p_stop(struct ieee80211_hw *dev) unsigned int i; struct p54p_desc *desc; + tasklet_kill(&priv->rx_tasklet); + P54P_WRITE(int_enable, cpu_to_le32(0)); P54P_READ(int_enable); udelay(10); @@ -473,26 +425,53 @@ static void p54p_stop(struct ieee80211_hw *dev) P54P_WRITE(dev_int, cpu_to_le32(ISL38XX_DEV_INT_RESET)); - for (i = 0; i < ARRAY_SIZE(priv->rx_buf); i++) { + for (i = 0; i < ARRAY_SIZE(priv->rx_buf_data); i++) { desc = &ring_control->rx_data[i]; if (desc->host_addr) - pci_unmap_single(priv->pdev, le32_to_cpu(desc->host_addr), - MAX_RX_SIZE, PCI_DMA_FROMDEVICE); - kfree_skb(priv->rx_buf[i]); - priv->rx_buf[i] = NULL; + pci_unmap_single(priv->pdev, + le32_to_cpu(desc->host_addr), + priv->common.rx_mtu + 32, + PCI_DMA_FROMDEVICE); + kfree_skb(priv->rx_buf_data[i]); + priv->rx_buf_data[i] = NULL; + } + + for (i = 0; i < ARRAY_SIZE(priv->rx_buf_mgmt); i++) { + desc = &ring_control->rx_mgmt[i]; + if (desc->host_addr) + pci_unmap_single(priv->pdev, + le32_to_cpu(desc->host_addr), + priv->common.rx_mtu + 32, + PCI_DMA_FROMDEVICE); + kfree_skb(priv->rx_buf_mgmt[i]); + priv->rx_buf_mgmt[i] = NULL; } - for (i = 0; i < ARRAY_SIZE(priv->tx_buf); i++) { + for (i = 0; i < ARRAY_SIZE(priv->tx_buf_data); i++) { desc = &ring_control->tx_data[i]; if (desc->host_addr) - pci_unmap_single(priv->pdev, le32_to_cpu(desc->host_addr), - le16_to_cpu(desc->len), PCI_DMA_TODEVICE); + pci_unmap_single(priv->pdev, + le32_to_cpu(desc->host_addr), + le16_to_cpu(desc->len), + PCI_DMA_TODEVICE); - kfree(priv->tx_buf[i]); - priv->tx_buf[i] = NULL; + kfree(priv->tx_buf_data[i]); + priv->tx_buf_data[i] = NULL; } - memset(ring_control, 0, sizeof(ring_control)); + for (i = 0; i < ARRAY_SIZE(priv->tx_buf_mgmt); i++) { + desc = &ring_control->tx_mgmt[i]; + if (desc->host_addr) + pci_unmap_single(priv->pdev, + le32_to_cpu(desc->host_addr), + le16_to_cpu(desc->len), + PCI_DMA_TODEVICE); + + kfree(priv->tx_buf_mgmt[i]); + priv->tx_buf_mgmt[i] = NULL; + } + + memset(ring_control, 0, sizeof(*ring_control)); } static int __devinit p54p_probe(struct pci_dev *pdev, @@ -506,7 +485,7 @@ static int __devinit p54p_probe(struct pci_dev *pdev, err = pci_enable_device(pdev); if (err) { - printk(KERN_ERR "%s (prism54pci): Cannot enable new PCI device\n", + printk(KERN_ERR "%s (p54pci): Cannot enable new PCI device\n", pci_name(pdev)); return err; } @@ -514,22 +493,22 @@ static int __devinit p54p_probe(struct pci_dev *pdev, mem_addr = pci_resource_start(pdev, 0); mem_len = pci_resource_len(pdev, 0); if (mem_len < sizeof(struct p54p_csr)) { - printk(KERN_ERR "%s (prism54pci): Too short PCI resources\n", + printk(KERN_ERR "%s (p54pci): Too short PCI resources\n", pci_name(pdev)); pci_disable_device(pdev); return err; } - err = pci_request_regions(pdev, "prism54pci"); + err = pci_request_regions(pdev, "p54pci"); if (err) { - printk(KERN_ERR "%s (prism54pci): Cannot obtain PCI resources\n", + printk(KERN_ERR "%s (p54pci): Cannot obtain PCI resources\n", pci_name(pdev)); return err; } if (pci_set_dma_mask(pdev, DMA_32BIT_MASK) || pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK)) { - printk(KERN_ERR "%s (prism54pci): No suitable DMA available\n", + printk(KERN_ERR "%s (p54pci): No suitable DMA available\n", pci_name(pdev)); goto err_free_reg; } @@ -542,7 +521,7 @@ static int __devinit p54p_probe(struct pci_dev *pdev, dev = p54_init_common(sizeof(*priv)); if (!dev) { - printk(KERN_ERR "%s (prism54pci): ieee80211 alloc failed\n", + printk(KERN_ERR "%s (p54pci): ieee80211 alloc failed\n", pci_name(pdev)); err = -ENOMEM; goto err_free_reg; @@ -556,7 +535,7 @@ static int __devinit p54p_probe(struct pci_dev *pdev, priv->map = ioremap(mem_addr, mem_len); if (!priv->map) { - printk(KERN_ERR "%s (prism54pci): Cannot map device memory\n", + printk(KERN_ERR "%s (p54pci): Cannot map device memory\n", pci_name(pdev)); err = -EINVAL; // TODO: use a better error code? goto err_free_dev; @@ -565,39 +544,31 @@ static int __devinit p54p_probe(struct pci_dev *pdev, priv->ring_control = pci_alloc_consistent(pdev, sizeof(*priv->ring_control), &priv->ring_control_dma); if (!priv->ring_control) { - printk(KERN_ERR "%s (prism54pci): Cannot allocate rings\n", + printk(KERN_ERR "%s (p54pci): Cannot allocate rings\n", pci_name(pdev)); err = -ENOMEM; goto err_iounmap; } - memset(priv->ring_control, 0, sizeof(*priv->ring_control)); - - err = p54p_upload_firmware(dev); - if (err) - goto err_free_desc; - - err = p54p_read_eeprom(dev); - if (err) - goto err_free_desc; - priv->common.open = p54p_open; priv->common.stop = p54p_stop; priv->common.tx = p54p_tx; spin_lock_init(&priv->lock); + tasklet_init(&priv->rx_tasklet, p54p_rx_tasklet, (unsigned long)dev); + + p54p_open(dev); + err = p54_read_eeprom(dev); + p54p_stop(dev); + if (err) + goto err_free_desc; err = ieee80211_register_hw(dev); if (err) { - printk(KERN_ERR "%s (prism54pci): Cannot register netdevice\n", + printk(KERN_ERR "%s (p54pci): Cannot register netdevice\n", pci_name(pdev)); goto err_free_common; } - printk(KERN_INFO "%s: hwaddr %s, isl38%02x\n", - wiphy_name(dev->wiphy), - print_mac(mac, dev->wiphy->perm_addr), - priv->common.version); - return 0; err_free_common: @@ -673,7 +644,7 @@ static int p54p_resume(struct pci_dev *pdev) #endif /* CONFIG_PM */ static struct pci_driver p54p_driver = { - .name = "prism54pci", + .name = "p54pci", .id_table = p54p_table, .probe = p54p_probe, .remove = __devexit_p(p54p_remove), diff --git a/drivers/net/wireless/p54/p54pci.h b/drivers/net/wireless/p54/p54pci.h index 5bedd7af385..4a6778070af 100644 --- a/drivers/net/wireless/p54/p54pci.h +++ b/drivers/net/wireless/p54/p54pci.h @@ -1,5 +1,5 @@ -#ifndef PRISM54PCI_H -#define PRISM54PCI_H +#ifndef P54PCI_H +#define P54PCI_H /* * Defines for PCI based mac80211 Prism54 driver @@ -68,7 +68,7 @@ struct p54p_csr { } __attribute__ ((packed)); /* usb backend only needs the register defines above */ -#ifndef PRISM54USB_H +#ifndef P54USB_H struct p54p_desc { __le32 host_addr; __le32 device_addr; @@ -92,15 +92,19 @@ struct p54p_priv { struct p54_common common; struct pci_dev *pdev; struct p54p_csr __iomem *map; + struct tasklet_struct rx_tasklet; spinlock_t lock; struct p54p_ring_control *ring_control; dma_addr_t ring_control_dma; - u32 rx_idx, tx_idx; - struct sk_buff *rx_buf[8]; - void *tx_buf[32]; + u32 rx_idx_data, tx_idx_data; + u32 rx_idx_mgmt, tx_idx_mgmt; + struct sk_buff *rx_buf_data[8]; + struct sk_buff *rx_buf_mgmt[4]; + void *tx_buf_data[32]; + void *tx_buf_mgmt[4]; struct completion boot_comp; }; -#endif /* PRISM54USB_H */ -#endif /* PRISM54PCI_H */ +#endif /* P54USB_H */ +#endif /* P54PCI_H */ diff --git a/drivers/net/wireless/p54/p54usb.c b/drivers/net/wireless/p54/p54usb.c index cbaca23a945..7444f372977 100644 --- a/drivers/net/wireless/p54/p54usb.c +++ b/drivers/net/wireless/p54/p54usb.c @@ -91,11 +91,16 @@ static void p54u_rx_cb(struct urb *urb) skb_unlink(skb, &priv->rx_queue); skb_put(skb, urb->actual_length); - if (!priv->hw_type) - skb_pull(skb, sizeof(struct net2280_tx_hdr)); + + if (priv->hw_type == P54U_NET2280) + skb_pull(skb, priv->common.tx_hdr_len); + if (priv->common.fw_interface == FW_LM87) { + skb_pull(skb, 4); + skb_put(skb, 4); + } if (p54_rx(dev, skb)) { - skb = dev_alloc_skb(MAX_RX_SIZE); + skb = dev_alloc_skb(priv->common.rx_mtu + 32); if (unlikely(!skb)) { usb_free_urb(urb); /* TODO check rx queue length and refill *somewhere* */ @@ -109,9 +114,12 @@ static void p54u_rx_cb(struct urb *urb) urb->context = skb; skb_queue_tail(&priv->rx_queue, skb); } else { - if (!priv->hw_type) - skb_push(skb, sizeof(struct net2280_tx_hdr)); - + if (priv->hw_type == P54U_NET2280) + skb_push(skb, priv->common.tx_hdr_len); + if (priv->common.fw_interface == FW_LM87) { + skb_push(skb, 4); + skb_put(skb, 4); + } skb_reset_tail_pointer(skb); skb_trim(skb, 0); if (urb->transfer_buffer != skb_tail_pointer(skb)) { @@ -145,7 +153,7 @@ static int p54u_init_urbs(struct ieee80211_hw *dev) struct p54u_rx_info *info; while (skb_queue_len(&priv->rx_queue) < 32) { - skb = __dev_alloc_skb(MAX_RX_SIZE, GFP_KERNEL); + skb = __dev_alloc_skb(priv->common.rx_mtu + 32, GFP_KERNEL); if (!skb) break; entry = usb_alloc_urb(0, GFP_KERNEL); @@ -153,7 +161,10 @@ static int p54u_init_urbs(struct ieee80211_hw *dev) kfree_skb(skb); break; } - usb_fill_bulk_urb(entry, priv->udev, usb_rcvbulkpipe(priv->udev, P54U_PIPE_DATA), skb_tail_pointer(skb), MAX_RX_SIZE, p54u_rx_cb, skb); + usb_fill_bulk_urb(entry, priv->udev, + usb_rcvbulkpipe(priv->udev, P54U_PIPE_DATA), + skb_tail_pointer(skb), + priv->common.rx_mtu + 32, p54u_rx_cb, skb); info = (struct p54u_rx_info *) skb->cb; info->urb = entry; info->dev = dev; @@ -207,6 +218,42 @@ static void p54u_tx_3887(struct ieee80211_hw *dev, struct p54_control_hdr *data, usb_submit_urb(data_urb, GFP_ATOMIC); } +__le32 p54u_lm87_chksum(const u32 *data, size_t length) +{ + __le32 chk = 0; + + length >>= 2; + while (length--) { + chk ^= cpu_to_le32(*data++); + chk = (chk >> 5) ^ (chk << 3); + } + + return chk; +} + +static void p54u_tx_lm87(struct ieee80211_hw *dev, + struct p54_control_hdr *data, + size_t len, int free_on_tx) +{ + struct p54u_priv *priv = dev->priv; + struct urb *data_urb; + struct lm87_tx_hdr *hdr = (void *)data - sizeof(*hdr); + + data_urb = usb_alloc_urb(0, GFP_ATOMIC); + if (!data_urb) + return; + + hdr->chksum = p54u_lm87_chksum((u32 *)data, len); + hdr->device_addr = data->req_id; + + usb_fill_bulk_urb(data_urb, priv->udev, + usb_sndbulkpipe(priv->udev, P54U_PIPE_DATA), hdr, + len + sizeof(*hdr), free_on_tx ? p54u_tx_free_cb : p54u_tx_cb, + dev); + + usb_submit_urb(data_urb, GFP_ATOMIC); +} + static void p54u_tx_net2280(struct ieee80211_hw *dev, struct p54_control_hdr *data, size_t len, int free_on_tx) { @@ -312,73 +359,6 @@ static int p54u_bulk_msg(struct p54u_priv *priv, unsigned int ep, data, len, &alen, 2000); } -static int p54u_read_eeprom(struct ieee80211_hw *dev) -{ - struct p54u_priv *priv = dev->priv; - void *buf; - struct p54_control_hdr *hdr; - int err, alen; - size_t offset = priv->hw_type ? 0x10 : 0x20; - - buf = kmalloc(0x2020, GFP_KERNEL); - if (!buf) { - printk(KERN_ERR "prism54usb: cannot allocate memory for " - "eeprom readback!\n"); - return -ENOMEM; - } - - if (priv->hw_type) { - *((u32 *) buf) = priv->common.rx_start; - err = p54u_bulk_msg(priv, P54U_PIPE_DATA, buf, sizeof(u32)); - if (err) { - printk(KERN_ERR "prism54usb: addr send failed\n"); - goto fail; - } - } else { - struct net2280_reg_write *reg = buf; - reg->port = cpu_to_le16(NET2280_DEV_U32); - reg->addr = cpu_to_le32(P54U_DEV_BASE); - reg->val = cpu_to_le32(ISL38XX_DEV_INT_DATA); - err = p54u_bulk_msg(priv, P54U_PIPE_DEV, buf, sizeof(*reg)); - if (err) { - printk(KERN_ERR "prism54usb: dev_int send failed\n"); - goto fail; - } - } - - hdr = buf + priv->common.tx_hdr_len; - p54_fill_eeprom_readback(hdr); - hdr->req_id = cpu_to_le32(priv->common.rx_start); - if (priv->common.tx_hdr_len) { - struct net2280_tx_hdr *tx_hdr = buf; - tx_hdr->device_addr = hdr->req_id; - tx_hdr->len = cpu_to_le16(EEPROM_READBACK_LEN); - } - - /* we can just pretend to send 0x2000 bytes of nothing in the headers */ - err = p54u_bulk_msg(priv, P54U_PIPE_DATA, buf, - EEPROM_READBACK_LEN + priv->common.tx_hdr_len); - if (err) { - printk(KERN_ERR "prism54usb: eeprom req send failed\n"); - goto fail; - } - - err = usb_bulk_msg(priv->udev, - usb_rcvbulkpipe(priv->udev, P54U_PIPE_DATA), - buf, 0x2020, &alen, 1000); - if (!err && alen > offset) { - p54_parse_eeprom(dev, (u8 *)buf + offset, alen - offset); - } else { - printk(KERN_ERR "prism54usb: eeprom read failed!\n"); - err = -EINVAL; - goto fail; - } - - fail: - kfree(buf); - return err; -} - static int p54u_upload_firmware_3887(struct ieee80211_hw *dev) { static char start_string[] = "~~~~<\r"; @@ -412,7 +392,9 @@ static int p54u_upload_firmware_3887(struct ieee80211_hw *dev) goto err_req_fw_failed; } - p54_parse_firmware(dev, fw_entry); + err = p54_parse_firmware(dev, fw_entry); + if (err) + goto err_upload_failed; left = block_size = min((size_t)P54U_FW_BLOCK, fw_entry->size); strcpy(buf, start_string); @@ -458,7 +440,7 @@ static int p54u_upload_firmware_3887(struct ieee80211_hw *dev) err = p54u_bulk_msg(priv, P54U_PIPE_DATA, buf, block_size); if (err) { - printk(KERN_ERR "prism54usb: firmware upload failed!\n"); + printk(KERN_ERR "p54usb: firmware upload failed!\n"); goto err_upload_failed; } @@ -469,7 +451,7 @@ static int p54u_upload_firmware_3887(struct ieee80211_hw *dev) *((__le32 *)buf) = cpu_to_le32(~crc32_le(~0, fw_entry->data, fw_entry->size)); err = p54u_bulk_msg(priv, P54U_PIPE_DATA, buf, sizeof(u32)); if (err) { - printk(KERN_ERR "prism54usb: firmware upload failed!\n"); + printk(KERN_ERR "p54usb: firmware upload failed!\n"); goto err_upload_failed; } @@ -480,13 +462,13 @@ static int p54u_upload_firmware_3887(struct ieee80211_hw *dev) break; if (alen > 5 && !memcmp(buf, "ERROR", 5)) { - printk(KERN_INFO "prism54usb: firmware upload failed!\n"); + printk(KERN_INFO "p54usb: firmware upload failed!\n"); err = -EINVAL; break; } if (time_after(jiffies, timeout)) { - printk(KERN_ERR "prism54usb: firmware boot timed out!\n"); + printk(KERN_ERR "p54usb: firmware boot timed out!\n"); err = -ETIMEDOUT; break; } @@ -498,7 +480,7 @@ static int p54u_upload_firmware_3887(struct ieee80211_hw *dev) buf[1] = '\r'; err = p54u_bulk_msg(priv, P54U_PIPE_DATA, buf, 2); if (err) { - printk(KERN_ERR "prism54usb: firmware boot failed!\n"); + printk(KERN_ERR "p54usb: firmware boot failed!\n"); goto err_upload_failed; } @@ -549,7 +531,12 @@ static int p54u_upload_firmware_net2280(struct ieee80211_hw *dev) return err; } - p54_parse_firmware(dev, fw_entry); + err = p54_parse_firmware(dev, fw_entry); + if (err) { + kfree(buf); + release_firmware(fw_entry); + return err; + } #define P54U_WRITE(type, addr, data) \ do {\ @@ -660,7 +647,7 @@ static int p54u_upload_firmware_net2280(struct ieee80211_hw *dev) err = p54u_bulk_msg(priv, P54U_PIPE_DATA, buf, block_len); if (err) { - printk(KERN_ERR "prism54usb: firmware block upload " + printk(KERN_ERR "p54usb: firmware block upload " "failed\n"); goto fail; } @@ -694,7 +681,7 @@ static int p54u_upload_firmware_net2280(struct ieee80211_hw *dev) 0x002C | (unsigned long)&devreg->direct_mem_win); if (!(reg & cpu_to_le32(ISL38XX_DMA_STATUS_DONE)) || !(reg & cpu_to_le32(ISL38XX_DMA_STATUS_READY))) { - printk(KERN_ERR "prism54usb: firmware DMA transfer " + printk(KERN_ERR "p54usb: firmware DMA transfer " "failed\n"); goto fail; } @@ -802,7 +789,7 @@ static int __devinit p54u_probe(struct usb_interface *intf, dev = p54_init_common(sizeof(*priv)); if (!dev) { - printk(KERN_ERR "prism54usb: ieee80211 alloc failed\n"); + printk(KERN_ERR "p54usb: ieee80211 alloc failed\n"); return -ENOMEM; } @@ -833,49 +820,40 @@ static int __devinit p54u_probe(struct usb_interface *intf, } } priv->common.open = p54u_open; - + priv->common.stop = p54u_stop; if (recognized_pipes < P54U_PIPE_NUMBER) { priv->hw_type = P54U_3887; - priv->common.tx = p54u_tx_3887; + err = p54u_upload_firmware_3887(dev); + if (priv->common.fw_interface == FW_LM87) { + dev->extra_tx_headroom += sizeof(struct lm87_tx_hdr); + priv->common.tx_hdr_len = sizeof(struct lm87_tx_hdr); + priv->common.tx = p54u_tx_lm87; + } else + priv->common.tx = p54u_tx_3887; } else { + priv->hw_type = P54U_NET2280; dev->extra_tx_headroom += sizeof(struct net2280_tx_hdr); priv->common.tx_hdr_len = sizeof(struct net2280_tx_hdr); priv->common.tx = p54u_tx_net2280; - } - priv->common.stop = p54u_stop; - - if (priv->hw_type) - err = p54u_upload_firmware_3887(dev); - else err = p54u_upload_firmware_net2280(dev); + } if (err) goto err_free_dev; - err = p54u_read_eeprom(dev); + skb_queue_head_init(&priv->rx_queue); + + p54u_open(dev); + err = p54_read_eeprom(dev); + p54u_stop(dev); if (err) goto err_free_dev; - if (!is_valid_ether_addr(dev->wiphy->perm_addr)) { - u8 perm_addr[ETH_ALEN]; - - printk(KERN_WARNING "prism54usb: Invalid hwaddr! Using randomly generated MAC addr\n"); - random_ether_addr(perm_addr); - SET_IEEE80211_PERM_ADDR(dev, perm_addr); - } - - skb_queue_head_init(&priv->rx_queue); - err = ieee80211_register_hw(dev); if (err) { - printk(KERN_ERR "prism54usb: Cannot register netdevice\n"); + printk(KERN_ERR "p54usb: Cannot register netdevice\n"); goto err_free_dev; } - printk(KERN_INFO "%s: hwaddr %s, isl38%02x\n", - wiphy_name(dev->wiphy), - print_mac(mac, dev->wiphy->perm_addr), - priv->common.version); - return 0; err_free_dev: @@ -902,7 +880,7 @@ static void __devexit p54u_disconnect(struct usb_interface *intf) } static struct usb_driver p54u_driver = { - .name = "prism54usb", + .name = "p54usb", .id_table = p54u_table, .probe = p54u_probe, .disconnect = p54u_disconnect, diff --git a/drivers/net/wireless/p54/p54usb.h b/drivers/net/wireless/p54/p54usb.h index d1896b396c1..5b8fe91379c 100644 --- a/drivers/net/wireless/p54/p54usb.h +++ b/drivers/net/wireless/p54/p54usb.h @@ -1,5 +1,5 @@ -#ifndef PRISM54USB_H -#define PRISM54USB_H +#ifndef P54USB_H +#define P54USB_H /* * Defines for USB based mac80211 Prism54 driver @@ -72,6 +72,11 @@ struct net2280_tx_hdr { u8 padding[8]; } __attribute__((packed)); +struct lm87_tx_hdr { + __le32 device_addr; + __le32 chksum; +} __attribute__((packed)); + /* Some flags for the isl hardware registers controlling DMA inside the * chip */ #define ISL38XX_DMA_STATUS_DONE 0x00000001 @@ -130,4 +135,4 @@ struct p54u_priv { struct sk_buff_head rx_queue; }; -#endif /* PRISM54USB_H */ +#endif /* P54USB_H */ diff --git a/drivers/net/wireless/prism54/isl_ioctl.c b/drivers/net/wireless/prism54/isl_ioctl.c index 3d75a7137d3..16e68f4b654 100644 --- a/drivers/net/wireless/prism54/isl_ioctl.c +++ b/drivers/net/wireless/prism54/isl_ioctl.c @@ -71,7 +71,7 @@ prism54_mib_mode_helper(islpci_private *priv, u32 iw_mode) if (iw_mode == IW_MODE_REPEAT || iw_mode == IW_MODE_SECOND) { printk(KERN_DEBUG "%s(): Sorry, Repeater mode and Secondary mode " - "are not yet supported by this driver.\n", __FUNCTION__); + "are not yet supported by this driver.\n", __func__); return -EINVAL; } @@ -333,7 +333,7 @@ prism54_set_mode(struct net_device *ndev, struct iw_request_info *info, if (*uwrq > IW_MODE_MONITOR || *uwrq < IW_MODE_AUTO) { printk(KERN_DEBUG "%s: %s() You passed a non-valid init_mode.\n", - priv->ndev->name, __FUNCTION__); + priv->ndev->name, __func__); return -EINVAL; } @@ -1234,7 +1234,7 @@ prism54_set_txpower(struct net_device *ndev, struct iw_request_info *info, /* don't know how to disable radio */ printk(KERN_DEBUG "%s: %s() disabling radio is not yet supported.\n", - priv->ndev->name, __FUNCTION__); + priv->ndev->name, __func__); return -ENOTSUPP; } else if (vwrq->fixed) /* currently only fixed value is supported */ @@ -1242,7 +1242,7 @@ prism54_set_txpower(struct net_device *ndev, struct iw_request_info *info, else { printk(KERN_DEBUG "%s: %s() auto power will be implemented later.\n", - priv->ndev->name, __FUNCTION__); + priv->ndev->name, __func__); return -ENOTSUPP; } } diff --git a/drivers/net/wireless/rt2x00/Kconfig b/drivers/net/wireless/rt2x00/Kconfig index d485a86bba7..11f590d63af 100644 --- a/drivers/net/wireless/rt2x00/Kconfig +++ b/drivers/net/wireless/rt2x00/Kconfig @@ -33,6 +33,10 @@ config RT2X00_LIB_FIRMWARE depends on RT2X00_LIB select FW_LOADER +config RT2X00_LIB_CRYPTO + boolean + depends on RT2X00_LIB + config RT2X00_LIB_RFKILL boolean depends on RT2X00_LIB @@ -103,6 +107,7 @@ config RT61PCI depends on PCI select RT2X00_LIB_PCI select RT2X00_LIB_FIRMWARE + select RT2X00_LIB_CRYPTO select CRC_ITU_T select EEPROM_93CX6 ---help--- @@ -151,6 +156,7 @@ config RT73USB depends on USB select RT2X00_LIB_USB select RT2X00_LIB_FIRMWARE + select RT2X00_LIB_CRYPTO select CRC_ITU_T ---help--- This adds support for rt2501 wireless chipset family. diff --git a/drivers/net/wireless/rt2x00/Makefile b/drivers/net/wireless/rt2x00/Makefile index 1087dbcf1a0..917cb4f3b03 100644 --- a/drivers/net/wireless/rt2x00/Makefile +++ b/drivers/net/wireless/rt2x00/Makefile @@ -3,6 +3,7 @@ rt2x00lib-y += rt2x00mac.o rt2x00lib-y += rt2x00config.o rt2x00lib-y += rt2x00queue.o rt2x00lib-$(CONFIG_RT2X00_LIB_DEBUGFS) += rt2x00debug.o +rt2x00lib-$(CONFIG_RT2X00_LIB_CRYPTO) += rt2x00crypto.o rt2x00lib-$(CONFIG_RT2X00_LIB_RFKILL) += rt2x00rfkill.o rt2x00lib-$(CONFIG_RT2X00_LIB_FIRMWARE) += rt2x00firmware.o rt2x00lib-$(CONFIG_RT2X00_LIB_LEDS) += rt2x00leds.o diff --git a/drivers/net/wireless/rt2x00/rt2400pci.c b/drivers/net/wireless/rt2x00/rt2400pci.c index 4c0538d6099..18b703c3fc2 100644 --- a/drivers/net/wireless/rt2x00/rt2400pci.c +++ b/drivers/net/wireless/rt2x00/rt2400pci.c @@ -1241,7 +1241,7 @@ static irqreturn_t rt2400pci_interrupt(int irq, void *dev_instance) if (!reg) return IRQ_NONE; - if (!test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags)) + if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags)) return IRQ_HANDLED; /* @@ -1404,7 +1404,7 @@ static int rt2400pci_init_eeprom(struct rt2x00_dev *rt2x00dev) * RF value list for RF2420 & RF2421 * Supports: 2.4 GHz */ -static const struct rf_channel rf_vals_bg[] = { +static const struct rf_channel rf_vals_b[] = { { 1, 0x00022058, 0x000c1fda, 0x00000101, 0 }, { 2, 0x00022058, 0x000c1fee, 0x00000101, 0 }, { 3, 0x00022058, 0x000c2002, 0x00000101, 0 }, @@ -1421,10 +1421,11 @@ static const struct rf_channel rf_vals_bg[] = { { 14, 0x00022058, 0x000c20fa, 0x00000101, 0 }, }; -static void rt2400pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev) +static int rt2400pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev) { struct hw_mode_spec *spec = &rt2x00dev->spec; - u8 *txpower; + struct channel_info *info; + char *tx_power; unsigned int i; /* @@ -1440,23 +1441,28 @@ static void rt2400pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev) EEPROM_MAC_ADDR_0)); /* - * Convert tx_power array in eeprom. - */ - txpower = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_START); - for (i = 0; i < 14; i++) - txpower[i] = TXPOWER_FROM_DEV(txpower[i]); - - /* * Initialize hw_mode information. */ spec->supported_bands = SUPPORT_BAND_2GHZ; spec->supported_rates = SUPPORT_RATE_CCK; - spec->tx_power_a = NULL; - spec->tx_power_bg = txpower; - spec->tx_power_default = DEFAULT_TXPOWER; - spec->num_channels = ARRAY_SIZE(rf_vals_bg); - spec->channels = rf_vals_bg; + spec->num_channels = ARRAY_SIZE(rf_vals_b); + spec->channels = rf_vals_b; + + /* + * Create channel information array + */ + info = kzalloc(spec->num_channels * sizeof(*info), GFP_KERNEL); + if (!info) + return -ENOMEM; + + spec->channels_info = info; + + tx_power = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_START); + for (i = 0; i < 14; i++) + info[i].tx_power1 = TXPOWER_FROM_DEV(tx_power[i]); + + return 0; } static int rt2400pci_probe_hw(struct rt2x00_dev *rt2x00dev) @@ -1477,7 +1483,9 @@ static int rt2400pci_probe_hw(struct rt2x00_dev *rt2x00dev) /* * Initialize hw specifications. */ - rt2400pci_probe_hw_mode(rt2x00dev); + retval = rt2400pci_probe_hw_mode(rt2x00dev); + if (retval) + return retval; /* * This device requires the atim queue and DMA-mapped skbs. diff --git a/drivers/net/wireless/rt2x00/rt2400pci.h b/drivers/net/wireless/rt2x00/rt2400pci.h index bc556425822..bbff381ce39 100644 --- a/drivers/net/wireless/rt2x00/rt2400pci.h +++ b/drivers/net/wireless/rt2x00/rt2400pci.h @@ -938,19 +938,13 @@ #define MAX_TXPOWER 62 #define DEFAULT_TXPOWER 39 -#define TXPOWER_FROM_DEV(__txpower) \ -({ \ - ((__txpower) > MAX_TXPOWER) ? DEFAULT_TXPOWER - MIN_TXPOWER : \ - ((__txpower) < MIN_TXPOWER) ? DEFAULT_TXPOWER - MIN_TXPOWER : \ - (((__txpower) - MAX_TXPOWER) + MIN_TXPOWER); \ -}) - -#define TXPOWER_TO_DEV(__txpower) \ -({ \ - (__txpower) += MIN_TXPOWER; \ - ((__txpower) <= MIN_TXPOWER) ? MAX_TXPOWER : \ - (((__txpower) >= MAX_TXPOWER) ? MIN_TXPOWER : \ - (MAX_TXPOWER - ((__txpower) - MIN_TXPOWER))); \ -}) +#define __CLAMP_TX(__txpower) \ + clamp_t(char, (__txpower), MIN_TXPOWER, MAX_TXPOWER) + +#define TXPOWER_FROM_DEV(__txpower) \ + ((__CLAMP_TX(__txpower) - MAX_TXPOWER) + MIN_TXPOWER) + +#define TXPOWER_TO_DEV(__txpower) \ + MAX_TXPOWER - (__CLAMP_TX(__txpower) - MIN_TXPOWER) #endif /* RT2400PCI_H */ diff --git a/drivers/net/wireless/rt2x00/rt2500pci.c b/drivers/net/wireless/rt2x00/rt2500pci.c index 181a146b476..2a96a011f2a 100644 --- a/drivers/net/wireless/rt2x00/rt2500pci.c +++ b/drivers/net/wireless/rt2x00/rt2500pci.c @@ -1316,6 +1316,8 @@ static void rt2500pci_fill_rxdone(struct queue_entry *entry, if (rt2x00_get_field32(word0, RXD_W0_OFDM)) rxdesc->dev_flags |= RXDONE_SIGNAL_PLCP; + else + rxdesc->dev_flags |= RXDONE_SIGNAL_BITRATE; if (rt2x00_get_field32(word0, RXD_W0_MY_BSS)) rxdesc->dev_flags |= RXDONE_MY_BSS; } @@ -1377,7 +1379,7 @@ static irqreturn_t rt2500pci_interrupt(int irq, void *dev_instance) if (!reg) return IRQ_NONE; - if (!test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags)) + if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags)) return IRQ_HANDLED; /* @@ -1721,10 +1723,11 @@ static const struct rf_channel rf_vals_5222[] = { { 161, 0x00022020, 0x000090be, 0x00000101, 0x00000a07 }, }; -static void rt2500pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev) +static int rt2500pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev) { struct hw_mode_spec *spec = &rt2x00dev->spec; - u8 *txpower; + struct channel_info *info; + char *tx_power; unsigned int i; /* @@ -1741,20 +1744,10 @@ static void rt2500pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev) EEPROM_MAC_ADDR_0)); /* - * Convert tx_power array in eeprom. - */ - txpower = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_START); - for (i = 0; i < 14; i++) - txpower[i] = TXPOWER_FROM_DEV(txpower[i]); - - /* * Initialize hw_mode information. */ spec->supported_bands = SUPPORT_BAND_2GHZ; spec->supported_rates = SUPPORT_RATE_CCK | SUPPORT_RATE_OFDM; - spec->tx_power_a = NULL; - spec->tx_power_bg = txpower; - spec->tx_power_default = DEFAULT_TXPOWER; if (rt2x00_rf(&rt2x00dev->chip, RF2522)) { spec->num_channels = ARRAY_SIZE(rf_vals_bg_2522); @@ -1776,6 +1769,26 @@ static void rt2500pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev) spec->num_channels = ARRAY_SIZE(rf_vals_5222); spec->channels = rf_vals_5222; } + + /* + * Create channel information array + */ + info = kzalloc(spec->num_channels * sizeof(*info), GFP_KERNEL); + if (!info) + return -ENOMEM; + + spec->channels_info = info; + + tx_power = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_START); + for (i = 0; i < 14; i++) + info[i].tx_power1 = TXPOWER_FROM_DEV(tx_power[i]); + + if (spec->num_channels > 14) { + for (i = 14; i < spec->num_channels; i++) + info[i].tx_power1 = DEFAULT_TXPOWER; + } + + return 0; } static int rt2500pci_probe_hw(struct rt2x00_dev *rt2x00dev) @@ -1796,7 +1809,9 @@ static int rt2500pci_probe_hw(struct rt2x00_dev *rt2x00dev) /* * Initialize hw specifications. */ - rt2500pci_probe_hw_mode(rt2x00dev); + retval = rt2500pci_probe_hw_mode(rt2x00dev); + if (retval) + return retval; /* * This device requires the atim queue and DMA-mapped skbs. diff --git a/drivers/net/wireless/rt2x00/rt2500pci.h b/drivers/net/wireless/rt2x00/rt2500pci.h index 42f376929ea..8c26bef6cf4 100644 --- a/drivers/net/wireless/rt2x00/rt2500pci.h +++ b/drivers/net/wireless/rt2x00/rt2500pci.h @@ -1223,17 +1223,10 @@ #define MAX_TXPOWER 31 #define DEFAULT_TXPOWER 24 -#define TXPOWER_FROM_DEV(__txpower) \ -({ \ - ((__txpower) > MAX_TXPOWER) ? \ - DEFAULT_TXPOWER : (__txpower); \ -}) - -#define TXPOWER_TO_DEV(__txpower) \ -({ \ - ((__txpower) <= MIN_TXPOWER) ? MIN_TXPOWER : \ - (((__txpower) >= MAX_TXPOWER) ? MAX_TXPOWER : \ - (__txpower)); \ -}) +#define TXPOWER_FROM_DEV(__txpower) \ + (((u8)(__txpower)) > MAX_TXPOWER) ? DEFAULT_TXPOWER : (__txpower) + +#define TXPOWER_TO_DEV(__txpower) \ + clamp_t(char, __txpower, MIN_TXPOWER, MAX_TXPOWER) #endif /* RT2500PCI_H */ diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c index cd5af656932..0e008b606f7 100644 --- a/drivers/net/wireless/rt2x00/rt2500usb.c +++ b/drivers/net/wireless/rt2x00/rt2500usb.c @@ -1114,8 +1114,7 @@ static void rt2500usb_write_tx_desc(struct rt2x00_dev *rt2x00dev, rt2x00_set_field32(&word, TXD_W0_NEW_SEQ, test_bit(ENTRY_TXD_FIRST_FRAGMENT, &txdesc->flags)); rt2x00_set_field32(&word, TXD_W0_IFS, txdesc->ifs); - rt2x00_set_field32(&word, TXD_W0_DATABYTE_COUNT, - skb->len - skbdesc->desc_len); + rt2x00_set_field32(&word, TXD_W0_DATABYTE_COUNT, skb->len); rt2x00_set_field32(&word, TXD_W0_CIPHER, CIPHER_NONE); rt2x00_desc_write(txd, 0, word); } @@ -1280,6 +1279,8 @@ static void rt2500usb_fill_rxdone(struct queue_entry *entry, if (rt2x00_get_field32(word0, RXD_W0_OFDM)) rxdesc->dev_flags |= RXDONE_SIGNAL_PLCP; + else + rxdesc->dev_flags |= RXDONE_SIGNAL_BITRATE; if (rt2x00_get_field32(word0, RXD_W0_MY_BSS)) rxdesc->dev_flags |= RXDONE_MY_BSS; @@ -1297,7 +1298,7 @@ static void rt2500usb_beacondone(struct urb *urb) struct queue_entry *entry = (struct queue_entry *)urb->context; struct queue_entry_priv_usb_bcn *bcn_priv = entry->priv_data; - if (!test_bit(DEVICE_ENABLED_RADIO, &entry->queue->rt2x00dev->flags)) + if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &entry->queue->rt2x00dev->flags)) return; /* @@ -1665,10 +1666,11 @@ static const struct rf_channel rf_vals_5222[] = { { 161, 0x00022020, 0x000090be, 0x00000101, 0x00000a07 }, }; -static void rt2500usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev) +static int rt2500usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev) { struct hw_mode_spec *spec = &rt2x00dev->spec; - u8 *txpower; + struct channel_info *info; + char *tx_power; unsigned int i; /* @@ -1687,20 +1689,10 @@ static void rt2500usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev) EEPROM_MAC_ADDR_0)); /* - * Convert tx_power array in eeprom. - */ - txpower = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_START); - for (i = 0; i < 14; i++) - txpower[i] = TXPOWER_FROM_DEV(txpower[i]); - - /* * Initialize hw_mode information. */ spec->supported_bands = SUPPORT_BAND_2GHZ; spec->supported_rates = SUPPORT_RATE_CCK | SUPPORT_RATE_OFDM; - spec->tx_power_a = NULL; - spec->tx_power_bg = txpower; - spec->tx_power_default = DEFAULT_TXPOWER; if (rt2x00_rf(&rt2x00dev->chip, RF2522)) { spec->num_channels = ARRAY_SIZE(rf_vals_bg_2522); @@ -1722,6 +1714,26 @@ static void rt2500usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev) spec->num_channels = ARRAY_SIZE(rf_vals_5222); spec->channels = rf_vals_5222; } + + /* + * Create channel information array + */ + info = kzalloc(spec->num_channels * sizeof(*info), GFP_KERNEL); + if (!info) + return -ENOMEM; + + spec->channels_info = info; + + tx_power = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_START); + for (i = 0; i < 14; i++) + info[i].tx_power1 = TXPOWER_FROM_DEV(tx_power[i]); + + if (spec->num_channels > 14) { + for (i = 14; i < spec->num_channels; i++) + info[i].tx_power1 = DEFAULT_TXPOWER; + } + + return 0; } static int rt2500usb_probe_hw(struct rt2x00_dev *rt2x00dev) @@ -1742,7 +1754,9 @@ static int rt2500usb_probe_hw(struct rt2x00_dev *rt2x00dev) /* * Initialize hw specifications. */ - rt2500usb_probe_hw_mode(rt2x00dev); + retval = rt2500usb_probe_hw_mode(rt2x00dev); + if (retval) + return retval; /* * This device requires the atim queue diff --git a/drivers/net/wireless/rt2x00/rt2500usb.h b/drivers/net/wireless/rt2x00/rt2500usb.h index 4769ffeb4cc..89e5ed24e4f 100644 --- a/drivers/net/wireless/rt2x00/rt2500usb.h +++ b/drivers/net/wireless/rt2x00/rt2500usb.h @@ -825,17 +825,10 @@ #define MAX_TXPOWER 31 #define DEFAULT_TXPOWER 24 -#define TXPOWER_FROM_DEV(__txpower) \ -({ \ - ((__txpower) > MAX_TXPOWER) ? \ - DEFAULT_TXPOWER : (__txpower); \ -}) - -#define TXPOWER_TO_DEV(__txpower) \ -({ \ - ((__txpower) <= MIN_TXPOWER) ? MIN_TXPOWER : \ - (((__txpower) >= MAX_TXPOWER) ? MAX_TXPOWER : \ - (__txpower)); \ -}) +#define TXPOWER_FROM_DEV(__txpower) \ + (((u8)(__txpower)) > MAX_TXPOWER) ? DEFAULT_TXPOWER : (__txpower) + +#define TXPOWER_TO_DEV(__txpower) \ + clamp_t(char, __txpower, MIN_TXPOWER, MAX_TXPOWER) #endif /* RT2500USB_H */ diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h index 8b10ea41b20..6f296cef76a 100644 --- a/drivers/net/wireless/rt2x00/rt2x00.h +++ b/drivers/net/wireless/rt2x00/rt2x00.h @@ -44,7 +44,7 @@ /* * Module information. */ -#define DRV_VERSION "2.1.8" +#define DRV_VERSION "2.2.1" #define DRV_PROJECT "http://rt2x00.serialmonkey.com" /* @@ -53,11 +53,11 @@ */ #define DEBUG_PRINTK_MSG(__dev, __kernlvl, __lvl, __msg, __args...) \ printk(__kernlvl "%s -> %s: %s - " __msg, \ - wiphy_name((__dev)->hw->wiphy), __FUNCTION__, __lvl, ##__args) + wiphy_name((__dev)->hw->wiphy), __func__, __lvl, ##__args) #define DEBUG_PRINTK_PROBE(__kernlvl, __lvl, __msg, __args...) \ printk(__kernlvl "%s -> %s: %s - " __msg, \ - KBUILD_MODNAME, __FUNCTION__, __lvl, ##__args) + KBUILD_MODNAME, __func__, __lvl, ##__args) #ifdef CONFIG_RT2X00_DEBUG #define DEBUG_PRINTK(__dev, __kernlvl, __lvl, __msg, __args...) \ @@ -144,6 +144,17 @@ struct rf_channel { }; /* + * Channel information structure + */ +struct channel_info { + unsigned int flags; +#define GEOGRAPHY_ALLOWED 0x00000001 + + short tx_power1; + short tx_power2; +}; + +/* * Antenna setup values. */ struct antenna_setup { @@ -394,10 +405,7 @@ static inline struct rt2x00_intf* vif_to_intf(struct ieee80211_vif *vif) * @num_channels: Number of supported channels. This is used as array size * for @tx_power_a, @tx_power_bg and @channels. * @channels: Device/chipset specific channel values (See &struct rf_channel). - * @tx_power_a: TX power values for all 5.2GHz channels (may be NULL). - * @tx_power_bg: TX power values for all 2.4GHz channels (may be NULL). - * @tx_power_default: Default TX power value to use when either - * @tx_power_a or @tx_power_bg is missing. + * @channels_info: Additional information for channels (See &struct channel_info). */ struct hw_mode_spec { unsigned int supported_bands; @@ -410,10 +418,7 @@ struct hw_mode_spec { unsigned int num_channels; const struct rf_channel *channels; - - const u8 *tx_power_a; - const u8 *tx_power_bg; - u8 tx_power_default; + const struct channel_info *channels_info; }; /* @@ -425,7 +430,9 @@ struct hw_mode_spec { */ struct rt2x00lib_conf { struct ieee80211_conf *conf; + struct rf_channel rf; + struct channel_info channel; struct antenna_setup ant; @@ -452,6 +459,23 @@ struct rt2x00lib_erp { }; /* + * Configuration structure for hardware encryption. + */ +struct rt2x00lib_crypto { + enum cipher cipher; + + enum set_key_cmd cmd; + const u8 *address; + + u32 bssidx; + u32 aid; + + u8 key[16]; + u8 tx_mic[8]; + u8 rx_mic[8]; +}; + +/* * Configuration structure wrapper around the * rt2x00 interface configuration handler. */ @@ -547,6 +571,12 @@ struct rt2x00lib_ops { /* * Configuration handlers. */ + int (*config_shared_key) (struct rt2x00_dev *rt2x00dev, + struct rt2x00lib_crypto *crypto, + struct ieee80211_key_conf *key); + int (*config_pairwise_key) (struct rt2x00_dev *rt2x00dev, + struct rt2x00lib_crypto *crypto, + struct ieee80211_key_conf *key); void (*config_filter) (struct rt2x00_dev *rt2x00dev, const unsigned int filter_flags); void (*config_intf) (struct rt2x00_dev *rt2x00dev, @@ -599,17 +629,16 @@ enum rt2x00_flags { /* * Device state flags */ - DEVICE_PRESENT, - DEVICE_REGISTERED_HW, - DEVICE_INITIALIZED, - DEVICE_STARTED, - DEVICE_STARTED_SUSPEND, - DEVICE_ENABLED_RADIO, - DEVICE_DISABLED_RADIO_HW, - DEVICE_DIRTY_CONFIG, + DEVICE_STATE_PRESENT, + DEVICE_STATE_REGISTERED_HW, + DEVICE_STATE_INITIALIZED, + DEVICE_STATE_STARTED, + DEVICE_STATE_STARTED_SUSPEND, + DEVICE_STATE_ENABLED_RADIO, + DEVICE_STATE_DISABLED_RADIO_HW, /* - * Driver features + * Driver requirements */ DRIVER_REQUIRE_FIRMWARE, DRIVER_REQUIRE_BEACON_GUARD, @@ -618,9 +647,14 @@ enum rt2x00_flags { DRIVER_REQUIRE_DMA, /* - * Driver configuration + * Driver features */ CONFIG_SUPPORT_HW_BUTTON, + CONFIG_SUPPORT_HW_CRYPTO, + + /* + * Driver configuration + */ CONFIG_FRAME_TYPE, CONFIG_RF_SEQUENCE, CONFIG_EXTERNAL_LNA_A, @@ -769,6 +803,11 @@ struct rt2x00_dev { u32 *rf; /* + * LNA gain + */ + short lna_gain; + + /* * USB Max frame size (for rt2500usb & rt73usb). */ u16 usb_maxpacket; @@ -966,6 +1005,13 @@ void rt2x00mac_configure_filter(struct ieee80211_hw *hw, unsigned int changed_flags, unsigned int *total_flags, int mc_count, struct dev_addr_list *mc_list); +#ifdef CONFIG_RT2X00_LIB_CRYPTO +int rt2x00mac_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd, + const u8 *local_address, const u8 *address, + struct ieee80211_key_conf *key); +#else +#define rt2x00mac_set_key NULL +#endif /* CONFIG_RT2X00_LIB_CRYPTO */ int rt2x00mac_get_stats(struct ieee80211_hw *hw, struct ieee80211_low_level_stats *stats); int rt2x00mac_get_tx_stats(struct ieee80211_hw *hw, diff --git a/drivers/net/wireless/rt2x00/rt2x00config.c b/drivers/net/wireless/rt2x00/rt2x00config.c index d134c3be539..ca051f50ef1 100644 --- a/drivers/net/wireless/rt2x00/rt2x00config.c +++ b/drivers/net/wireless/rt2x00/rt2x00config.c @@ -121,7 +121,7 @@ void rt2x00lib_config_antenna(struct rt2x00_dev *rt2x00dev, * Antenna setup changes require the RX to be disabled, * else the changes will be ignored by the device. */ - if (test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags)) + if (test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags)) rt2x00lib_toggle_rx(rt2x00dev, STATE_RADIO_RX_OFF_LINK); /* @@ -136,7 +136,7 @@ void rt2x00lib_config_antenna(struct rt2x00_dev *rt2x00dev, rt2x00dev->link.ant.active.rx = libconf.ant.rx; rt2x00dev->link.ant.active.tx = libconf.ant.tx; - if (test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags)) + if (test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags)) rt2x00lib_toggle_rx(rt2x00dev, STATE_RADIO_RX_ON_LINK); } @@ -245,6 +245,10 @@ config: memcpy(&libconf.rf, &rt2x00dev->spec.channels[conf->channel->hw_value], sizeof(libconf.rf)); + + memcpy(&libconf.channel, + &rt2x00dev->spec.channels_info[conf->channel->hw_value], + sizeof(libconf.channel)); } if (flags & CONFIG_UPDATE_ANTENNA) { diff --git a/drivers/net/wireless/rt2x00/rt2x00crypto.c b/drivers/net/wireless/rt2x00/rt2x00crypto.c new file mode 100644 index 00000000000..e1448cfa944 --- /dev/null +++ b/drivers/net/wireless/rt2x00/rt2x00crypto.c @@ -0,0 +1,215 @@ +/* + Copyright (C) 2004 - 2008 rt2x00 SourceForge Project + <http://rt2x00.serialmonkey.com> + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the + Free Software Foundation, Inc., + 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +/* + Module: rt2x00lib + Abstract: rt2x00 crypto specific routines. + */ + +#include <linux/kernel.h> +#include <linux/module.h> + +#include "rt2x00.h" +#include "rt2x00lib.h" + +enum cipher rt2x00crypto_key_to_cipher(struct ieee80211_key_conf *key) +{ + switch (key->alg) { + case ALG_WEP: + if (key->keylen == LEN_WEP40) + return CIPHER_WEP64; + else + return CIPHER_WEP128; + case ALG_TKIP: + return CIPHER_TKIP; + case ALG_CCMP: + return CIPHER_AES; + default: + return CIPHER_NONE; + } +} + +unsigned int rt2x00crypto_tx_overhead(struct ieee80211_tx_info *tx_info) +{ + struct ieee80211_key_conf *key = tx_info->control.hw_key; + unsigned int overhead = 0; + + /* + * Extend frame length to include IV/EIV/ICV/MMIC, + * note that these lengths should only be added when + * mac80211 does not generate it. + */ + overhead += tx_info->control.icv_len; + + if (!(key->flags & IEEE80211_KEY_FLAG_GENERATE_IV)) + overhead += tx_info->control.iv_len; + + if (!(key->flags & IEEE80211_KEY_FLAG_GENERATE_MMIC)) { + if (key->alg == ALG_TKIP) + overhead += 8; + } + + return overhead; +} + +void rt2x00crypto_tx_remove_iv(struct sk_buff *skb, unsigned int iv_len) +{ + struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb); + unsigned int header_length = ieee80211_get_hdrlen_from_skb(skb); + + if (unlikely(!iv_len)) + return; + + /* Copy IV/EIV data */ + if (iv_len >= 4) + memcpy(&skbdesc->iv, skb->data + header_length, 4); + if (iv_len >= 8) + memcpy(&skbdesc->eiv, skb->data + header_length + 4, 4); + + /* Move ieee80211 header */ + memmove(skb->data + iv_len, skb->data, header_length); + + /* Pull buffer to correct size */ + skb_pull(skb, iv_len); + + /* IV/EIV data has officially be stripped */ + skbdesc->flags |= FRAME_DESC_IV_STRIPPED; +} + +void rt2x00crypto_tx_insert_iv(struct sk_buff *skb) +{ + struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb); + unsigned int header_length = ieee80211_get_hdrlen_from_skb(skb); + const unsigned int iv_len = + ((!!(skbdesc->iv)) * 4) + ((!!(skbdesc->eiv)) * 4); + + if (!(skbdesc->flags & FRAME_DESC_IV_STRIPPED)) + return; + + skb_push(skb, iv_len); + + /* Move ieee80211 header */ + memmove(skb->data, skb->data + iv_len, header_length); + + /* Copy IV/EIV data */ + if (iv_len >= 4) + memcpy(skb->data + header_length, &skbdesc->iv, 4); + if (iv_len >= 8) + memcpy(skb->data + header_length + 4, &skbdesc->eiv, 4); + + /* IV/EIV data has returned into the frame */ + skbdesc->flags &= ~FRAME_DESC_IV_STRIPPED; +} + +void rt2x00crypto_rx_insert_iv(struct sk_buff *skb, unsigned int align, + unsigned int header_length, + struct rxdone_entry_desc *rxdesc) +{ + unsigned int payload_len = rxdesc->size - header_length; + unsigned int iv_len; + unsigned int icv_len; + unsigned int transfer = 0; + + /* + * WEP64/WEP128: Provides IV & ICV + * TKIP: Provides IV/EIV & ICV + * AES: Provies IV/EIV & ICV + */ + switch (rxdesc->cipher) { + case CIPHER_WEP64: + case CIPHER_WEP128: + iv_len = 4; + icv_len = 4; + break; + case CIPHER_TKIP: + iv_len = 8; + icv_len = 4; + break; + case CIPHER_AES: + iv_len = 8; + icv_len = 8; + break; + default: + /* Unsupport type */ + return; + } + + /* + * Make room for new data, note that we increase both + * headsize and tailsize when required. The tailsize is + * only needed when ICV data needs to be inserted and + * the padding is smaller then the ICV data. + * When alignment requirements is greater then the + * ICV data we must trim the skb to the correct size + * because we need to remove the extra bytes. + */ + skb_push(skb, iv_len + align); + if (align < icv_len) + skb_put(skb, icv_len - align); + else if (align > icv_len) + skb_trim(skb, rxdesc->size + iv_len + icv_len); + + /* Move ieee80211 header */ + memmove(skb->data + transfer, + skb->data + transfer + iv_len + align, + header_length); + transfer += header_length; + + /* Copy IV data */ + if (iv_len >= 4) { + memcpy(skb->data + transfer, &rxdesc->iv, 4); + transfer += 4; + } + + /* Copy EIV data */ + if (iv_len >= 8) { + memcpy(skb->data + transfer, &rxdesc->eiv, 4); + transfer += 4; + } + + /* Move payload */ + if (align) { + memmove(skb->data + transfer, + skb->data + transfer + align, + payload_len); + } + + /* + * NOTE: Always count the payload as transfered, + * even when alignment was set to zero. This is required + * for determining the correct offset for the ICV data. + */ + transfer += payload_len; + + /* Copy ICV data */ + if (icv_len >= 4) { + memcpy(skb->data + transfer, &rxdesc->icv, 4); + /* + * AES appends 8 bytes, we can't fill the upper + * 4 bytes, but mac80211 doesn't care about what + * we provide here anyway and strips it immediately. + */ + transfer += icv_len; + } + + /* IV/EIV/ICV has been inserted into frame */ + rxdesc->size = transfer; + rxdesc->flags &= ~RX_FLAG_IV_STRIPPED; +} diff --git a/drivers/net/wireless/rt2x00/rt2x00debug.c b/drivers/net/wireless/rt2x00/rt2x00debug.c index 6bee1d611bb..5cf4c859e39 100644 --- a/drivers/net/wireless/rt2x00/rt2x00debug.c +++ b/drivers/net/wireless/rt2x00/rt2x00debug.c @@ -35,6 +35,13 @@ #define MAX_LINE_LENGTH 64 +struct rt2x00debug_crypto { + unsigned long success; + unsigned long icv_error; + unsigned long mic_error; + unsigned long key_error; +}; + struct rt2x00debug_intf { /* * Pointer to driver structure where @@ -63,6 +70,7 @@ struct rt2x00debug_intf { * - queue folder * - frame dump file * - queue stats file + * - crypto stats file */ struct dentry *driver_folder; struct dentry *driver_entry; @@ -80,6 +88,7 @@ struct rt2x00debug_intf { struct dentry *queue_folder; struct dentry *queue_frame_dump_entry; struct dentry *queue_stats_entry; + struct dentry *crypto_stats_entry; /* * The frame dump file only allows a single reader, @@ -98,6 +107,12 @@ struct rt2x00debug_intf { wait_queue_head_t frame_dump_waitqueue; /* + * HW crypto statistics. + * All statistics are stored seperately per cipher type. + */ + struct rt2x00debug_crypto crypto_stats[CIPHER_MAX]; + + /* * Driver and chipset files will use a data buffer * that has been created in advance. This will simplify * the code since we can use the debugfs functions. @@ -114,6 +129,25 @@ struct rt2x00debug_intf { unsigned int offset_rf; }; +void rt2x00debug_update_crypto(struct rt2x00_dev *rt2x00dev, + enum cipher cipher, enum rx_crypto status) +{ + struct rt2x00debug_intf *intf = rt2x00dev->debugfs_intf; + + if (cipher == CIPHER_TKIP_NO_MIC) + cipher = CIPHER_TKIP; + if (cipher == CIPHER_NONE || cipher > CIPHER_MAX) + return; + + /* Remove CIPHER_NONE index */ + cipher--; + + intf->crypto_stats[cipher].success += (status == RX_CRYPTO_SUCCESS); + intf->crypto_stats[cipher].icv_error += (status == RX_CRYPTO_FAIL_ICV); + intf->crypto_stats[cipher].mic_error += (status == RX_CRYPTO_FAIL_MIC); + intf->crypto_stats[cipher].key_error += (status == RX_CRYPTO_FAIL_KEY); +} + void rt2x00debug_dump_frame(struct rt2x00_dev *rt2x00dev, enum rt2x00_dump_type type, struct sk_buff *skb) { @@ -327,6 +361,59 @@ static const struct file_operations rt2x00debug_fop_queue_stats = { .release = rt2x00debug_file_release, }; +#ifdef CONFIG_RT2X00_LIB_CRYPTO +static ssize_t rt2x00debug_read_crypto_stats(struct file *file, + char __user *buf, + size_t length, + loff_t *offset) +{ + struct rt2x00debug_intf *intf = file->private_data; + char *name[] = { "WEP64", "WEP128", "TKIP", "AES" }; + char *data; + char *temp; + size_t size; + unsigned int i; + + if (*offset) + return 0; + + data = kzalloc((1 + CIPHER_MAX)* MAX_LINE_LENGTH, GFP_KERNEL); + if (!data) + return -ENOMEM; + + temp = data; + temp += sprintf(data, "cipher\tsuccess\ticv err\tmic err\tkey err\n"); + + for (i = 0; i < CIPHER_MAX; i++) { + temp += sprintf(temp, "%s\t%lu\t%lu\t%lu\t%lu\n", name[i], + intf->crypto_stats[i].success, + intf->crypto_stats[i].icv_error, + intf->crypto_stats[i].mic_error, + intf->crypto_stats[i].key_error); + } + + size = strlen(data); + size = min(size, length); + + if (copy_to_user(buf, data, size)) { + kfree(data); + return -EFAULT; + } + + kfree(data); + + *offset += size; + return size; +} + +static const struct file_operations rt2x00debug_fop_crypto_stats = { + .owner = THIS_MODULE, + .read = rt2x00debug_read_crypto_stats, + .open = rt2x00debug_file_open, + .release = rt2x00debug_file_release, +}; +#endif + #define RT2X00DEBUGFS_OPS_READ(__name, __format, __type) \ static ssize_t rt2x00debug_read_##__name(struct file *file, \ char __user *buf, \ @@ -569,6 +656,13 @@ void rt2x00debug_register(struct rt2x00_dev *rt2x00dev) debugfs_create_file("queue", S_IRUSR, intf->queue_folder, intf, &rt2x00debug_fop_queue_stats); +#ifdef CONFIG_RT2X00_LIB_CRYPTO + if (test_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags)) + intf->crypto_stats_entry = + debugfs_create_file("crypto", S_IRUGO, intf->queue_folder, + intf, &rt2x00debug_fop_crypto_stats); +#endif + return; exit: @@ -587,6 +681,9 @@ void rt2x00debug_deregister(struct rt2x00_dev *rt2x00dev) skb_queue_purge(&intf->frame_dump_skbqueue); +#ifdef CONFIG_RT2X00_LIB_CRYPTO + debugfs_remove(intf->crypto_stats_entry); +#endif debugfs_remove(intf->queue_stats_entry); debugfs_remove(intf->queue_frame_dump_entry); debugfs_remove(intf->queue_folder); diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c index f42283ad7b0..2f3bfc60688 100644 --- a/drivers/net/wireless/rt2x00/rt2x00dev.c +++ b/drivers/net/wireless/rt2x00/rt2x00dev.c @@ -34,7 +34,7 @@ */ void rt2x00lib_reset_link_tuner(struct rt2x00_dev *rt2x00dev) { - if (!test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags)) + if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags)) return; /* @@ -94,8 +94,8 @@ int rt2x00lib_enable_radio(struct rt2x00_dev *rt2x00dev) * Don't enable the radio twice. * And check if the hardware button has been disabled. */ - if (test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags) || - test_bit(DEVICE_DISABLED_RADIO_HW, &rt2x00dev->flags)) + if (test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags) || + test_bit(DEVICE_STATE_DISABLED_RADIO_HW, &rt2x00dev->flags)) return 0; /* @@ -117,7 +117,7 @@ int rt2x00lib_enable_radio(struct rt2x00_dev *rt2x00dev) rt2x00leds_led_radio(rt2x00dev, true); rt2x00led_led_activity(rt2x00dev, true); - __set_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags); + set_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags); /* * Enable RX. @@ -134,7 +134,7 @@ int rt2x00lib_enable_radio(struct rt2x00_dev *rt2x00dev) void rt2x00lib_disable_radio(struct rt2x00_dev *rt2x00dev) { - if (!__test_and_clear_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags)) + if (!test_and_clear_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags)) return; /* @@ -354,7 +354,7 @@ static void rt2x00lib_link_tuner(struct work_struct *work) * When the radio is shutting down we should * immediately cease all link tuning. */ - if (!test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags)) + if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags)) return; /* @@ -431,7 +431,7 @@ static void rt2x00lib_intf_scheduled_iter(void *data, u8 *mac, * note that in the spinlock protected area above the delayed_flags * have been cleared correctly. */ - if (!test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags)) + if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags)) return; if (delayed_flags & DELAYED_UPDATE_BEACON) @@ -484,7 +484,7 @@ static void rt2x00lib_beacondone_iter(void *data, u8 *mac, void rt2x00lib_beacondone(struct rt2x00_dev *rt2x00dev) { - if (!test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags)) + if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags)) return; ieee80211_iterate_active_interfaces_atomic(rt2x00dev->hw, @@ -508,6 +508,15 @@ void rt2x00lib_txdone(struct queue_entry *entry, rt2x00queue_unmap_skb(rt2x00dev, entry->skb); /* + * If the IV/EIV data was stripped from the frame before it was + * passed to the hardware, we should now reinsert it again because + * mac80211 will expect the the same data to be present it the + * frame as it was passed to us. + */ + if (test_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags)) + rt2x00crypto_tx_insert_iv(entry->skb); + + /* * Send frame to debugfs immediately, after this call is completed * we are going to overwrite the skb->cb array. */ @@ -563,7 +572,7 @@ void rt2x00lib_txdone(struct queue_entry *entry, rt2x00dev->ops->lib->init_txentry(rt2x00dev, entry); - __clear_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags); + clear_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags); rt2x00queue_index_inc(entry->queue, Q_INDEX_DONE); /* @@ -585,7 +594,7 @@ void rt2x00lib_rxdone(struct rt2x00_dev *rt2x00dev, struct ieee80211_supported_band *sband; struct ieee80211_hdr *hdr; const struct rt2x00_rate *rate; - unsigned int header_size; + unsigned int header_length; unsigned int align; unsigned int i; int idx = -1; @@ -613,10 +622,19 @@ void rt2x00lib_rxdone(struct rt2x00_dev *rt2x00dev, * The data behind the ieee80211 header must be * aligned on a 4 byte boundary. */ - header_size = ieee80211_get_hdrlen_from_skb(entry->skb); - align = ((unsigned long)(entry->skb->data + header_size)) & 3; + header_length = ieee80211_get_hdrlen_from_skb(entry->skb); + align = ((unsigned long)(entry->skb->data + header_length)) & 3; - if (align) { + /* + * Hardware might have stripped the IV/EIV/ICV data, + * in that case it is possible that the data was + * provided seperately (through hardware descriptor) + * in which case we should reinsert the data into the frame. + */ + if ((rxdesc.flags & RX_FLAG_IV_STRIPPED)) { + rt2x00crypto_rx_insert_iv(entry->skb, align, + header_length, &rxdesc); + } else if (align) { skb_push(entry->skb, align); /* Move entire frame in 1 command */ memmove(entry->skb->data, entry->skb->data + align, @@ -635,7 +653,7 @@ void rt2x00lib_rxdone(struct rt2x00_dev *rt2x00dev, if (((rxdesc.dev_flags & RXDONE_SIGNAL_PLCP) && (rate->plcp == rxdesc.signal)) || - (!(rxdesc.dev_flags & RXDONE_SIGNAL_PLCP) && + ((rxdesc.dev_flags & RXDONE_SIGNAL_BITRATE) && (rate->bitrate == rxdesc.signal))) { idx = i; break; @@ -657,6 +675,10 @@ void rt2x00lib_rxdone(struct rt2x00_dev *rt2x00dev, (rxdesc.dev_flags & RXDONE_MY_BSS)) rt2x00lib_update_link_stats(&rt2x00dev->link, rxdesc.rssi); + rt2x00debug_update_crypto(rt2x00dev, + rxdesc.cipher, + rxdesc.cipher_status); + rt2x00dev->link.qual.rx_success++; rx_status->mactime = rxdesc.timestamp; @@ -796,7 +818,6 @@ static int rt2x00lib_probe_hw_modes(struct rt2x00_dev *rt2x00dev, struct ieee80211_rate *rates; unsigned int num_rates; unsigned int i; - unsigned char tx_power; num_rates = 0; if (spec->supported_rates & SUPPORT_RATE_CCK) @@ -822,20 +843,9 @@ static int rt2x00lib_probe_hw_modes(struct rt2x00_dev *rt2x00dev, * Initialize Channel list. */ for (i = 0; i < spec->num_channels; i++) { - if (spec->channels[i].channel <= 14) { - if (spec->tx_power_bg) - tx_power = spec->tx_power_bg[i]; - else - tx_power = spec->tx_power_default; - } else { - if (spec->tx_power_a) - tx_power = spec->tx_power_a[i]; - else - tx_power = spec->tx_power_default; - } - rt2x00lib_channel(&channels[i], - spec->channels[i].channel, tx_power, i); + spec->channels[i].channel, + spec->channels_info[i].tx_power1, i); } /* @@ -878,7 +888,7 @@ static int rt2x00lib_probe_hw_modes(struct rt2x00_dev *rt2x00dev, static void rt2x00lib_remove_hw(struct rt2x00_dev *rt2x00dev) { - if (test_bit(DEVICE_REGISTERED_HW, &rt2x00dev->flags)) + if (test_bit(DEVICE_STATE_REGISTERED_HW, &rt2x00dev->flags)) ieee80211_unregister_hw(rt2x00dev->hw); if (likely(rt2x00dev->hw->wiphy->bands[IEEE80211_BAND_2GHZ])) { @@ -887,6 +897,8 @@ static void rt2x00lib_remove_hw(struct rt2x00_dev *rt2x00dev) rt2x00dev->hw->wiphy->bands[IEEE80211_BAND_2GHZ] = NULL; rt2x00dev->hw->wiphy->bands[IEEE80211_BAND_5GHZ] = NULL; } + + kfree(rt2x00dev->spec.channels_info); } static int rt2x00lib_probe_hw(struct rt2x00_dev *rt2x00dev) @@ -894,6 +906,9 @@ static int rt2x00lib_probe_hw(struct rt2x00_dev *rt2x00dev) struct hw_mode_spec *spec = &rt2x00dev->spec; int status; + if (test_bit(DEVICE_STATE_REGISTERED_HW, &rt2x00dev->flags)) + return 0; + /* * Initialize HW modes. */ @@ -915,7 +930,7 @@ static int rt2x00lib_probe_hw(struct rt2x00_dev *rt2x00dev) return status; } - __set_bit(DEVICE_REGISTERED_HW, &rt2x00dev->flags); + set_bit(DEVICE_STATE_REGISTERED_HW, &rt2x00dev->flags); return 0; } @@ -925,7 +940,7 @@ static int rt2x00lib_probe_hw(struct rt2x00_dev *rt2x00dev) */ static void rt2x00lib_uninitialize(struct rt2x00_dev *rt2x00dev) { - if (!__test_and_clear_bit(DEVICE_INITIALIZED, &rt2x00dev->flags)) + if (!test_and_clear_bit(DEVICE_STATE_INITIALIZED, &rt2x00dev->flags)) return; /* @@ -948,7 +963,7 @@ static int rt2x00lib_initialize(struct rt2x00_dev *rt2x00dev) { int status; - if (test_bit(DEVICE_INITIALIZED, &rt2x00dev->flags)) + if (test_bit(DEVICE_STATE_INITIALIZED, &rt2x00dev->flags)) return 0; /* @@ -967,7 +982,7 @@ static int rt2x00lib_initialize(struct rt2x00_dev *rt2x00dev) return status; } - __set_bit(DEVICE_INITIALIZED, &rt2x00dev->flags); + set_bit(DEVICE_STATE_INITIALIZED, &rt2x00dev->flags); /* * Register the extra components. @@ -981,7 +996,7 @@ int rt2x00lib_start(struct rt2x00_dev *rt2x00dev) { int retval; - if (test_bit(DEVICE_STARTED, &rt2x00dev->flags)) + if (test_bit(DEVICE_STATE_STARTED, &rt2x00dev->flags)) return 0; /* @@ -999,28 +1014,18 @@ int rt2x00lib_start(struct rt2x00_dev *rt2x00dev) if (retval) return retval; - /* - * Enable radio. - */ - retval = rt2x00lib_enable_radio(rt2x00dev); - if (retval) { - rt2x00lib_uninitialize(rt2x00dev); - return retval; - } - rt2x00dev->intf_ap_count = 0; rt2x00dev->intf_sta_count = 0; rt2x00dev->intf_associated = 0; - __set_bit(DEVICE_STARTED, &rt2x00dev->flags); - __set_bit(DEVICE_DIRTY_CONFIG, &rt2x00dev->flags); + set_bit(DEVICE_STATE_STARTED, &rt2x00dev->flags); return 0; } void rt2x00lib_stop(struct rt2x00_dev *rt2x00dev) { - if (!test_bit(DEVICE_STARTED, &rt2x00dev->flags)) + if (!test_and_clear_bit(DEVICE_STATE_STARTED, &rt2x00dev->flags)) return; /* @@ -1032,8 +1037,6 @@ void rt2x00lib_stop(struct rt2x00_dev *rt2x00dev) rt2x00dev->intf_ap_count = 0; rt2x00dev->intf_sta_count = 0; rt2x00dev->intf_associated = 0; - - __clear_bit(DEVICE_STARTED, &rt2x00dev->flags); } /* @@ -1049,6 +1052,11 @@ int rt2x00lib_probe_dev(struct rt2x00_dev *rt2x00dev) */ rt2x00dev->hw->vif_data_size = sizeof(struct rt2x00_intf); + rt2x00dev->hw->wiphy->interface_modes = + BIT(NL80211_IFTYPE_AP) | + BIT(NL80211_IFTYPE_STATION) | + BIT(NL80211_IFTYPE_ADHOC); + /* * Let the driver probe the device to detect the capabilities. */ @@ -1088,7 +1096,7 @@ int rt2x00lib_probe_dev(struct rt2x00_dev *rt2x00dev) rt2x00rfkill_allocate(rt2x00dev); rt2x00debug_register(rt2x00dev); - __set_bit(DEVICE_PRESENT, &rt2x00dev->flags); + set_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags); return 0; @@ -1101,7 +1109,7 @@ EXPORT_SYMBOL_GPL(rt2x00lib_probe_dev); void rt2x00lib_remove_dev(struct rt2x00_dev *rt2x00dev) { - __clear_bit(DEVICE_PRESENT, &rt2x00dev->flags); + clear_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags); /* * Disable radio. @@ -1146,14 +1154,15 @@ int rt2x00lib_suspend(struct rt2x00_dev *rt2x00dev, pm_message_t state) int retval; NOTICE(rt2x00dev, "Going to sleep.\n"); - __clear_bit(DEVICE_PRESENT, &rt2x00dev->flags); /* * Only continue if mac80211 has open interfaces. */ - if (!test_bit(DEVICE_STARTED, &rt2x00dev->flags)) + if (!test_and_clear_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags) || + !test_bit(DEVICE_STATE_STARTED, &rt2x00dev->flags)) goto exit; - __set_bit(DEVICE_STARTED_SUSPEND, &rt2x00dev->flags); + + set_bit(DEVICE_STATE_STARTED_SUSPEND, &rt2x00dev->flags); /* * Disable radio. @@ -1225,7 +1234,7 @@ int rt2x00lib_resume(struct rt2x00_dev *rt2x00dev) /* * Only continue if mac80211 had open interfaces. */ - if (!__test_and_clear_bit(DEVICE_STARTED_SUSPEND, &rt2x00dev->flags)) + if (!test_and_clear_bit(DEVICE_STATE_STARTED_SUSPEND, &rt2x00dev->flags)) return 0; /* @@ -1252,7 +1261,7 @@ int rt2x00lib_resume(struct rt2x00_dev *rt2x00dev) /* * We are ready again to receive requests from mac80211. */ - __set_bit(DEVICE_PRESENT, &rt2x00dev->flags); + set_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags); /* * It is possible that during that mac80211 has attempted @@ -1272,7 +1281,7 @@ int rt2x00lib_resume(struct rt2x00_dev *rt2x00dev) return 0; exit: - rt2x00lib_disable_radio(rt2x00dev); + rt2x00lib_stop(rt2x00dev); rt2x00lib_uninitialize(rt2x00dev); rt2x00debug_deregister(rt2x00dev); diff --git a/drivers/net/wireless/rt2x00/rt2x00lib.h b/drivers/net/wireless/rt2x00/rt2x00lib.h index c5fb3a72cf3..7bbc16b1b6c 100644 --- a/drivers/net/wireless/rt2x00/rt2x00lib.h +++ b/drivers/net/wireless/rt2x00/rt2x00lib.h @@ -181,6 +181,8 @@ void rt2x00debug_register(struct rt2x00_dev *rt2x00dev); void rt2x00debug_deregister(struct rt2x00_dev *rt2x00dev); void rt2x00debug_dump_frame(struct rt2x00_dev *rt2x00dev, enum rt2x00_dump_type type, struct sk_buff *skb); +void rt2x00debug_update_crypto(struct rt2x00_dev *rt2x00dev, + enum cipher cipher, enum rx_crypto status); #else static inline void rt2x00debug_register(struct rt2x00_dev *rt2x00dev) { @@ -195,9 +197,54 @@ static inline void rt2x00debug_dump_frame(struct rt2x00_dev *rt2x00dev, struct sk_buff *skb) { } + +static inline void rt2x00debug_update_crypto(struct rt2x00_dev *rt2x00dev, + enum cipher cipher, + enum rx_crypto status) +{ +} #endif /* CONFIG_RT2X00_LIB_DEBUGFS */ /* + * Crypto handlers. + */ +#ifdef CONFIG_RT2X00_LIB_CRYPTO +enum cipher rt2x00crypto_key_to_cipher(struct ieee80211_key_conf *key); +unsigned int rt2x00crypto_tx_overhead(struct ieee80211_tx_info *tx_info); +void rt2x00crypto_tx_remove_iv(struct sk_buff *skb, unsigned int iv_len); +void rt2x00crypto_tx_insert_iv(struct sk_buff *skb); +void rt2x00crypto_rx_insert_iv(struct sk_buff *skb, unsigned int align, + unsigned int header_length, + struct rxdone_entry_desc *rxdesc); +#else +static inline enum cipher rt2x00crypto_key_to_cipher(struct ieee80211_key_conf *key) +{ + return CIPHER_NONE; +} + +static inline unsigned int rt2x00crypto_tx_overhead(struct ieee80211_tx_info *tx_info) +{ + return 0; +} + +static inline void rt2x00crypto_tx_remove_iv(struct sk_buff *skb, + unsigned int iv_len) +{ +} + +static inline void rt2x00crypto_tx_insert_iv(struct sk_buff *skb) +{ +} + +static inline void rt2x00crypto_rx_insert_iv(struct sk_buff *skb, + unsigned int align, + unsigned int header_length, + struct rxdone_entry_desc *rxdesc) +{ +} +#endif + +/* * RFkill handlers. */ #ifdef CONFIG_RT2X00_LIB_RFKILL diff --git a/drivers/net/wireless/rt2x00/rt2x00mac.c b/drivers/net/wireless/rt2x00/rt2x00mac.c index d0650738863..56829fad347 100644 --- a/drivers/net/wireless/rt2x00/rt2x00mac.c +++ b/drivers/net/wireless/rt2x00/rt2x00mac.c @@ -36,21 +36,22 @@ static int rt2x00mac_tx_rts_cts(struct rt2x00_dev *rt2x00dev, struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(frag_skb); struct ieee80211_tx_info *rts_info; struct sk_buff *skb; - int size; + unsigned int data_length; + int retval = 0; if (tx_info->flags & IEEE80211_TX_CTL_USE_CTS_PROTECT) - size = sizeof(struct ieee80211_cts); + data_length = sizeof(struct ieee80211_cts); else - size = sizeof(struct ieee80211_rts); + data_length = sizeof(struct ieee80211_rts); - skb = dev_alloc_skb(size + rt2x00dev->hw->extra_tx_headroom); - if (!skb) { + skb = dev_alloc_skb(data_length + rt2x00dev->hw->extra_tx_headroom); + if (unlikely(!skb)) { WARNING(rt2x00dev, "Failed to create RTS/CTS frame.\n"); - return NETDEV_TX_BUSY; + return -ENOMEM; } skb_reserve(skb, rt2x00dev->hw->extra_tx_headroom); - skb_put(skb, size); + skb_put(skb, data_length); /* * Copy TX information over from original frame to @@ -63,7 +64,6 @@ static int rt2x00mac_tx_rts_cts(struct rt2x00_dev *rt2x00dev, */ memcpy(skb->cb, frag_skb->cb, sizeof(skb->cb)); rts_info = IEEE80211_SKB_CB(skb); - rts_info->control.hw_key = NULL; rts_info->flags &= ~IEEE80211_TX_CTL_USE_RTS_CTS; rts_info->flags &= ~IEEE80211_TX_CTL_USE_CTS_PROTECT; rts_info->flags &= ~IEEE80211_TX_CTL_REQ_TX_STATUS; @@ -73,22 +73,33 @@ static int rt2x00mac_tx_rts_cts(struct rt2x00_dev *rt2x00dev, else rts_info->flags &= ~IEEE80211_TX_CTL_NO_ACK; + skb->do_not_encrypt = 1; + + /* + * RTS/CTS frame should use the length of the frame plus any + * encryption overhead that will be added by the hardware. + */ +#ifdef CONFIG_RT2X00_LIB_CRYPTO + if (!frag_skb->do_not_encrypt) + data_length += rt2x00crypto_tx_overhead(tx_info); +#endif /* CONFIG_RT2X00_LIB_CRYPTO */ + if (tx_info->flags & IEEE80211_TX_CTL_USE_CTS_PROTECT) ieee80211_ctstoself_get(rt2x00dev->hw, tx_info->control.vif, - frag_skb->data, size, tx_info, + frag_skb->data, data_length, tx_info, (struct ieee80211_cts *)(skb->data)); else ieee80211_rts_get(rt2x00dev->hw, tx_info->control.vif, - frag_skb->data, size, tx_info, + frag_skb->data, data_length, tx_info, (struct ieee80211_rts *)(skb->data)); - if (rt2x00queue_write_tx_frame(queue, skb)) { + retval = rt2x00queue_write_tx_frame(queue, skb); + if (retval) { dev_kfree_skb_any(skb); WARNING(rt2x00dev, "Failed to send RTS/CTS frame.\n"); - return NETDEV_TX_BUSY; } - return NETDEV_TX_OK; + return retval; } int rt2x00mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb) @@ -106,11 +117,8 @@ int rt2x00mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb) * Note that we can only stop the TX queues inside the TX path * due to possible race conditions in mac80211. */ - if (!test_bit(DEVICE_PRESENT, &rt2x00dev->flags)) { - ieee80211_stop_queues(hw); - dev_kfree_skb_any(skb); - return NETDEV_TX_OK; - } + if (!test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags)) + goto exit_fail; /* * Determine which queue to put packet on. @@ -141,26 +149,25 @@ int rt2x00mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb) if ((tx_info->flags & (IEEE80211_TX_CTL_USE_RTS_CTS | IEEE80211_TX_CTL_USE_CTS_PROTECT)) && !rt2x00dev->ops->hw->set_rts_threshold) { - if (rt2x00queue_available(queue) <= 1) { - ieee80211_stop_queue(rt2x00dev->hw, qid); - return NETDEV_TX_BUSY; - } - - if (rt2x00mac_tx_rts_cts(rt2x00dev, queue, skb)) { - ieee80211_stop_queue(rt2x00dev->hw, qid); - return NETDEV_TX_BUSY; - } - } + if (rt2x00queue_available(queue) <= 1) + goto exit_fail; - if (rt2x00queue_write_tx_frame(queue, skb)) { - ieee80211_stop_queue(rt2x00dev->hw, qid); - return NETDEV_TX_BUSY; + if (rt2x00mac_tx_rts_cts(rt2x00dev, queue, skb)) + goto exit_fail; } + if (rt2x00queue_write_tx_frame(queue, skb)) + goto exit_fail; + if (rt2x00queue_threshold(queue)) ieee80211_stop_queue(rt2x00dev->hw, qid); return NETDEV_TX_OK; + + exit_fail: + ieee80211_stop_queue(rt2x00dev->hw, qid); + dev_kfree_skb_any(skb); + return NETDEV_TX_OK; } EXPORT_SYMBOL_GPL(rt2x00mac_tx); @@ -168,7 +175,7 @@ int rt2x00mac_start(struct ieee80211_hw *hw) { struct rt2x00_dev *rt2x00dev = hw->priv; - if (!test_bit(DEVICE_PRESENT, &rt2x00dev->flags)) + if (!test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags)) return 0; return rt2x00lib_start(rt2x00dev); @@ -179,7 +186,7 @@ void rt2x00mac_stop(struct ieee80211_hw *hw) { struct rt2x00_dev *rt2x00dev = hw->priv; - if (!test_bit(DEVICE_PRESENT, &rt2x00dev->flags)) + if (!test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags)) return; rt2x00lib_stop(rt2x00dev); @@ -199,8 +206,8 @@ int rt2x00mac_add_interface(struct ieee80211_hw *hw, * Don't allow interfaces to be added * the device has disappeared. */ - if (!test_bit(DEVICE_PRESENT, &rt2x00dev->flags) || - !test_bit(DEVICE_STARTED, &rt2x00dev->flags)) + if (!test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags) || + !test_bit(DEVICE_STATE_STARTED, &rt2x00dev->flags)) return -ENODEV; switch (conf->type) { @@ -249,7 +256,7 @@ int rt2x00mac_add_interface(struct ieee80211_hw *hw, */ for (i = 0; i < queue->limit; i++) { entry = &queue->entries[i]; - if (!__test_and_set_bit(ENTRY_BCN_ASSIGNED, &entry->flags)) + if (!test_and_set_bit(ENTRY_BCN_ASSIGNED, &entry->flags)) break; } @@ -303,7 +310,7 @@ void rt2x00mac_remove_interface(struct ieee80211_hw *hw, * either the device has disappeared or when * no interface is present. */ - if (!test_bit(DEVICE_PRESENT, &rt2x00dev->flags) || + if (!test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags) || (conf->type == IEEE80211_IF_TYPE_AP && !rt2x00dev->intf_ap_count) || (conf->type != IEEE80211_IF_TYPE_AP && !rt2x00dev->intf_sta_count)) return; @@ -317,7 +324,7 @@ void rt2x00mac_remove_interface(struct ieee80211_hw *hw, * Release beacon entry so it is available for * new interfaces again. */ - __clear_bit(ENTRY_BCN_ASSIGNED, &intf->beacon->flags); + clear_bit(ENTRY_BCN_ASSIGNED, &intf->beacon->flags); /* * Make sure the bssid and mac address registers @@ -331,45 +338,45 @@ EXPORT_SYMBOL_GPL(rt2x00mac_remove_interface); int rt2x00mac_config(struct ieee80211_hw *hw, struct ieee80211_conf *conf) { struct rt2x00_dev *rt2x00dev = hw->priv; - int force_reconfig; + int radio_on; + int status; /* * Mac80211 might be calling this function while we are trying * to remove the device or perhaps suspending it. */ - if (!test_bit(DEVICE_PRESENT, &rt2x00dev->flags)) + if (!test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags)) return 0; /* - * Check if we need to disable the radio, - * if this is not the case, at least the RX must be disabled. + * Only change device state when the radio is enabled. It does not + * matter what parameters we have configured when the radio is disabled + * because we won't be able to send or receive anyway. Also note that + * some configuration parameters (e.g. channel and antenna values) can + * only be set when the radio is enabled. */ - if (test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags)) { - if (!conf->radio_enabled) - rt2x00lib_disable_radio(rt2x00dev); - else - rt2x00lib_toggle_rx(rt2x00dev, STATE_RADIO_RX_OFF); - } + radio_on = test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags); + if (conf->radio_enabled) { + /* For programming the values, we have to turn RX off */ + rt2x00lib_toggle_rx(rt2x00dev, STATE_RADIO_RX_OFF); - /* - * When the DEVICE_DIRTY_CONFIG flag is set, the device has recently - * been started and the configuration must be forced upon the hardware. - * Otherwise registers will not be intialized correctly and could - * result in non-working hardware because essential registers aren't - * initialized. - */ - force_reconfig = - __test_and_clear_bit(DEVICE_DIRTY_CONFIG, &rt2x00dev->flags); + /* Enable the radio */ + status = rt2x00lib_enable_radio(rt2x00dev); + if (unlikely(status)) + return status; - rt2x00lib_config(rt2x00dev, conf, force_reconfig); + /* + * When we've just turned on the radio, we want to reprogram + * everything to ensure a consistent state + */ + rt2x00lib_config(rt2x00dev, conf, !radio_on); - /* - * Reenable RX only if the radio should be on. - */ - if (test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags)) + /* Turn RX back on */ rt2x00lib_toggle_rx(rt2x00dev, STATE_RADIO_RX_ON); - else if (conf->radio_enabled) - return rt2x00lib_enable_radio(rt2x00dev); + } else { + /* Disable the radio */ + rt2x00lib_disable_radio(rt2x00dev); + } return 0; } @@ -388,7 +395,7 @@ int rt2x00mac_config_interface(struct ieee80211_hw *hw, * Mac80211 might be calling this function while we are trying * to remove the device or perhaps suspending it. */ - if (!test_bit(DEVICE_PRESENT, &rt2x00dev->flags)) + if (!test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags)) return 0; spin_lock(&intf->lock); @@ -467,6 +474,90 @@ void rt2x00mac_configure_filter(struct ieee80211_hw *hw, } EXPORT_SYMBOL_GPL(rt2x00mac_configure_filter); +#ifdef CONFIG_RT2X00_LIB_CRYPTO +int rt2x00mac_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd, + const u8 *local_address, const u8 *address, + struct ieee80211_key_conf *key) +{ + struct rt2x00_dev *rt2x00dev = hw->priv; + int (*set_key) (struct rt2x00_dev *rt2x00dev, + struct rt2x00lib_crypto *crypto, + struct ieee80211_key_conf *key); + struct rt2x00lib_crypto crypto; + + if (!test_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags)) + return -EOPNOTSUPP; + else if (key->keylen > 32) + return -ENOSPC; + + memset(&crypto, 0, sizeof(crypto)); + + /* + * When in STA mode, bssidx is always 0 otherwise local_address[5] + * contains the bss number, see BSS_ID_MASK comments for details. + */ + if (rt2x00dev->intf_sta_count) + crypto.bssidx = 0; + else + crypto.bssidx = + local_address[5] & (rt2x00dev->ops->max_ap_intf - 1); + + crypto.cipher = rt2x00crypto_key_to_cipher(key); + if (crypto.cipher == CIPHER_NONE) + return -EOPNOTSUPP; + + crypto.cmd = cmd; + crypto.address = address; + + if (crypto.cipher == CIPHER_TKIP) { + if (key->keylen > NL80211_TKIP_DATA_OFFSET_ENCR_KEY) + memcpy(&crypto.key, + &key->key[NL80211_TKIP_DATA_OFFSET_ENCR_KEY], + sizeof(crypto.key)); + + if (key->keylen > NL80211_TKIP_DATA_OFFSET_TX_MIC_KEY) + memcpy(&crypto.tx_mic, + &key->key[NL80211_TKIP_DATA_OFFSET_TX_MIC_KEY], + sizeof(crypto.tx_mic)); + + if (key->keylen > NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY) + memcpy(&crypto.rx_mic, + &key->key[NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY], + sizeof(crypto.rx_mic)); + } else + memcpy(&crypto.key, &key->key[0], key->keylen); + + /* + * Each BSS has a maximum of 4 shared keys. + * Shared key index values: + * 0) BSS0 key0 + * 1) BSS0 key1 + * ... + * 4) BSS1 key0 + * ... + * 8) BSS2 key0 + * ... + * Both pairwise as shared key indeces are determined by + * driver. This is required because the hardware requires + * keys to be assigned in correct order (When key 1 is + * provided but key 0 is not, then the key is not found + * by the hardware during RX). + */ + key->hw_key_idx = 0; + + if (key->flags & IEEE80211_KEY_FLAG_PAIRWISE) + set_key = rt2x00dev->ops->lib->config_pairwise_key; + else + set_key = rt2x00dev->ops->lib->config_shared_key; + + if (!set_key) + return -EOPNOTSUPP; + + return set_key(rt2x00dev, &crypto, key); +} +EXPORT_SYMBOL_GPL(rt2x00mac_set_key); +#endif /* CONFIG_RT2X00_LIB_CRYPTO */ + int rt2x00mac_get_stats(struct ieee80211_hw *hw, struct ieee80211_low_level_stats *stats) { @@ -575,10 +666,11 @@ int rt2x00mac_conf_tx(struct ieee80211_hw *hw, u16 queue_idx, queue->cw_max = 10; /* cw_min: 2^10 = 1024. */ queue->aifs = params->aifs; + queue->txop = params->txop; INFO(rt2x00dev, - "Configured TX queue %d - CWmin: %d, CWmax: %d, Aifs: %d.\n", - queue_idx, queue->cw_min, queue->cw_max, queue->aifs); + "Configured TX queue %d - CWmin: %d, CWmax: %d, Aifs: %d, TXop: %d.\n", + queue_idx, queue->cw_min, queue->cw_max, queue->aifs, queue->txop); return 0; } diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.c b/drivers/net/wireless/rt2x00/rt2x00queue.c index 898cdd7f57d..a5e965068c8 100644 --- a/drivers/net/wireless/rt2x00/rt2x00queue.c +++ b/drivers/net/wireless/rt2x00/rt2x00queue.c @@ -33,10 +33,11 @@ struct sk_buff *rt2x00queue_alloc_rxskb(struct rt2x00_dev *rt2x00dev, struct queue_entry *entry) { - unsigned int frame_size; - unsigned int reserved_size; struct sk_buff *skb; struct skb_frame_desc *skbdesc; + unsigned int frame_size; + unsigned int head_size = 0; + unsigned int tail_size = 0; /* * The frame size includes descriptor size, because the @@ -49,16 +50,32 @@ struct sk_buff *rt2x00queue_alloc_rxskb(struct rt2x00_dev *rt2x00dev, * this means we need at least 3 bytes for moving the frame * into the correct offset. */ - reserved_size = 4; + head_size = 4; + + /* + * For IV/EIV/ICV assembly we must make sure there is + * at least 8 bytes bytes available in headroom for IV/EIV + * and 4 bytes for ICV data as tailroon. + */ +#ifdef CONFIG_RT2X00_LIB_CRYPTO + if (test_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags)) { + head_size += 8; + tail_size += 4; + } +#endif /* CONFIG_RT2X00_LIB_CRYPTO */ /* * Allocate skbuffer. */ - skb = dev_alloc_skb(frame_size + reserved_size); + skb = dev_alloc_skb(frame_size + head_size + tail_size); if (!skb) return NULL; - skb_reserve(skb, reserved_size); + /* + * Make sure we not have a frame with the requested bytes + * available in the head and tail. + */ + skb_reserve(skb, head_size); skb_put(skb, frame_size); /* @@ -83,8 +100,21 @@ void rt2x00queue_map_txskb(struct rt2x00_dev *rt2x00dev, struct sk_buff *skb) { struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb); - skbdesc->skb_dma = dma_map_single(rt2x00dev->dev, skb->data, skb->len, - DMA_TO_DEVICE); + /* + * If device has requested headroom, we should make sure that + * is also mapped to the DMA so it can be used for transfering + * additional descriptor information to the hardware. + */ + skb_push(skb, rt2x00dev->hw->extra_tx_headroom); + + skbdesc->skb_dma = + dma_map_single(rt2x00dev->dev, skb->data, skb->len, DMA_TO_DEVICE); + + /* + * Restore data pointer to original location again. + */ + skb_pull(skb, rt2x00dev->hw->extra_tx_headroom); + skbdesc->flags |= SKBDESC_DMA_MAPPED_TX; } EXPORT_SYMBOL_GPL(rt2x00queue_map_txskb); @@ -100,7 +130,12 @@ void rt2x00queue_unmap_skb(struct rt2x00_dev *rt2x00dev, struct sk_buff *skb) } if (skbdesc->flags & SKBDESC_DMA_MAPPED_TX) { - dma_unmap_single(rt2x00dev->dev, skbdesc->skb_dma, skb->len, + /* + * Add headroom to the skb length, it has been removed + * by the driver, but it was actually mapped to DMA. + */ + dma_unmap_single(rt2x00dev->dev, skbdesc->skb_dma, + skb->len + rt2x00dev->hw->extra_tx_headroom, DMA_TO_DEVICE); skbdesc->flags &= ~SKBDESC_DMA_MAPPED_TX; } @@ -140,7 +175,7 @@ static void rt2x00queue_create_tx_descriptor(struct queue_entry *entry, txdesc->cw_max = entry->queue->cw_max; txdesc->aifs = entry->queue->aifs; - /* Data length should be extended with 4 bytes for CRC */ + /* Data length + CRC + IV/EIV/ICV/MMIC (when using encryption) */ data_length = entry->skb->len + 4; /* @@ -149,6 +184,35 @@ static void rt2x00queue_create_tx_descriptor(struct queue_entry *entry, if (!(tx_info->flags & IEEE80211_TX_CTL_NO_ACK)) __set_bit(ENTRY_TXD_ACK, &txdesc->flags); +#ifdef CONFIG_RT2X00_LIB_CRYPTO + if (test_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags) && + !entry->skb->do_not_encrypt) { + struct ieee80211_key_conf *hw_key = tx_info->control.hw_key; + + __set_bit(ENTRY_TXD_ENCRYPT, &txdesc->flags); + + txdesc->cipher = rt2x00crypto_key_to_cipher(hw_key); + + if (hw_key->flags & IEEE80211_KEY_FLAG_PAIRWISE) + __set_bit(ENTRY_TXD_ENCRYPT_PAIRWISE, &txdesc->flags); + + txdesc->key_idx = hw_key->hw_key_idx; + txdesc->iv_offset = ieee80211_get_hdrlen_from_skb(entry->skb); + + /* + * Extend frame length to include all encryption overhead + * that will be added by the hardware. + */ + data_length += rt2x00crypto_tx_overhead(tx_info); + + if (!(hw_key->flags & IEEE80211_KEY_FLAG_GENERATE_IV)) + __set_bit(ENTRY_TXD_ENCRYPT_IV, &txdesc->flags); + + if (!(hw_key->flags & IEEE80211_KEY_FLAG_GENERATE_MMIC)) + __set_bit(ENTRY_TXD_ENCRYPT_MMIC, &txdesc->flags); + } +#endif /* CONFIG_RT2X00_LIB_CRYPTO */ + /* * Check if this is a RTS/CTS frame */ @@ -305,11 +369,12 @@ int rt2x00queue_write_tx_frame(struct data_queue *queue, struct sk_buff *skb) struct queue_entry *entry = rt2x00queue_get_entry(queue, Q_INDEX); struct txentry_desc txdesc; struct skb_frame_desc *skbdesc; + unsigned int iv_len = IEEE80211_SKB_CB(skb)->control.iv_len; if (unlikely(rt2x00queue_full(queue))) return -EINVAL; - if (__test_and_set_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags)) { + if (test_and_set_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags)) { ERROR(queue->rt2x00dev, "Arrived at non-free entry in the non-full queue %d.\n" "Please file bug report to %s.\n", @@ -326,21 +391,39 @@ int rt2x00queue_write_tx_frame(struct data_queue *queue, struct sk_buff *skb) rt2x00queue_create_tx_descriptor(entry, &txdesc); /* - * skb->cb array is now ours and we are free to use it. + * All information is retreived from the skb->cb array, + * now we should claim ownership of the driver part of that + * array. */ skbdesc = get_skb_frame_desc(entry->skb); memset(skbdesc, 0, sizeof(*skbdesc)); skbdesc->entry = entry; + /* + * When hardware encryption is supported, and this frame + * is to be encrypted, we should strip the IV/EIV data from + * the frame so we can provide it to the driver seperately. + */ + if (test_bit(ENTRY_TXD_ENCRYPT, &txdesc.flags) && + !test_bit(ENTRY_TXD_ENCRYPT_IV, &txdesc.flags)) + rt2x00crypto_tx_remove_iv(skb, iv_len); + + /* + * It could be possible that the queue was corrupted and this + * call failed. Just drop the frame, we cannot rollback and pass + * the frame to mac80211 because the skb->cb has now been tainted. + */ if (unlikely(queue->rt2x00dev->ops->lib->write_tx_data(entry))) { - __clear_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags); - return -EIO; + clear_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags); + dev_kfree_skb_any(entry->skb); + entry->skb = NULL; + return 0; } if (test_bit(DRIVER_REQUIRE_DMA, &queue->rt2x00dev->flags)) rt2x00queue_map_txskb(queue->rt2x00dev, skb); - __set_bit(ENTRY_DATA_PENDING, &entry->flags); + set_bit(ENTRY_DATA_PENDING, &entry->flags); rt2x00queue_index_inc(queue, Q_INDEX); rt2x00queue_write_tx_descriptor(entry, &txdesc); @@ -653,6 +736,7 @@ static void rt2x00queue_init(struct rt2x00_dev *rt2x00dev, queue->rt2x00dev = rt2x00dev; queue->qid = qid; + queue->txop = 0; queue->aifs = 2; queue->cw_min = 5; queue->cw_max = 10; diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.h b/drivers/net/wireless/rt2x00/rt2x00queue.h index ff78e52ce43..9dbf04f0f04 100644 --- a/drivers/net/wireless/rt2x00/rt2x00queue.h +++ b/drivers/net/wireless/rt2x00/rt2x00queue.h @@ -87,10 +87,13 @@ enum data_queue_qid { * * @SKBDESC_DMA_MAPPED_RX: &skb_dma field has been mapped for RX * @SKBDESC_DMA_MAPPED_TX: &skb_dma field has been mapped for TX + * @FRAME_DESC_IV_STRIPPED: Frame contained a IV/EIV provided by + * mac80211 but was stripped for processing by the driver. */ enum skb_frame_desc_flags { - SKBDESC_DMA_MAPPED_RX = (1 << 0), - SKBDESC_DMA_MAPPED_TX = (1 << 1), + SKBDESC_DMA_MAPPED_RX = 1 << 0, + SKBDESC_DMA_MAPPED_TX = 1 << 1, + FRAME_DESC_IV_STRIPPED = 1 << 2, }; /** @@ -104,6 +107,8 @@ enum skb_frame_desc_flags { * @desc: Pointer to descriptor part of the frame. * Note that this pointer could point to something outside * of the scope of the skb->data pointer. + * @iv: IV data used during encryption/decryption. + * @eiv: EIV data used during encryption/decryption. * @skb_dma: (PCI-only) the DMA address associated with the sk buffer. * @entry: The entry to which this sk buffer belongs. */ @@ -113,6 +118,9 @@ struct skb_frame_desc { unsigned int desc_len; void *desc; + __le32 iv; + __le32 eiv; + dma_addr_t skb_dma; struct queue_entry *entry; @@ -132,13 +140,14 @@ static inline struct skb_frame_desc* get_skb_frame_desc(struct sk_buff *skb) /** * enum rxdone_entry_desc_flags: Flags for &struct rxdone_entry_desc * - * @RXDONE_SIGNAL_PLCP: Does the signal field contain the plcp value, - * or does it contain the bitrate itself. + * @RXDONE_SIGNAL_PLCP: Signal field contains the plcp value. + * @RXDONE_SIGNAL_BITRATE: Signal field contains the bitrate value. * @RXDONE_MY_BSS: Does this frame originate from device's BSS. */ enum rxdone_entry_desc_flags { RXDONE_SIGNAL_PLCP = 1 << 0, - RXDONE_MY_BSS = 1 << 1, + RXDONE_SIGNAL_BITRATE = 1 << 1, + RXDONE_MY_BSS = 1 << 2, }; /** @@ -152,7 +161,11 @@ enum rxdone_entry_desc_flags { * @size: Data size of the received frame. * @flags: MAC80211 receive flags (See &enum mac80211_rx_flags). * @dev_flags: Ralink receive flags (See &enum rxdone_entry_desc_flags). - + * @cipher: Cipher type used during decryption. + * @cipher_status: Decryption status. + * @iv: IV data used during decryption. + * @eiv: EIV data used during decryption. + * @icv: ICV data used during decryption. */ struct rxdone_entry_desc { u64 timestamp; @@ -161,6 +174,12 @@ struct rxdone_entry_desc { int size; int flags; int dev_flags; + u8 cipher; + u8 cipher_status; + + __le32 iv; + __le32 eiv; + __le32 icv; }; /** @@ -206,6 +225,10 @@ struct txdone_entry_desc { * @ENTRY_TXD_BURST: This frame belongs to the same burst event. * @ENTRY_TXD_ACK: An ACK is required for this frame. * @ENTRY_TXD_RETRY_MODE: When set, the long retry count is used. + * @ENTRY_TXD_ENCRYPT: This frame should be encrypted. + * @ENTRY_TXD_ENCRYPT_PAIRWISE: Use pairwise key table (instead of shared). + * @ENTRY_TXD_ENCRYPT_IV: Generate IV/EIV in hardware. + * @ENTRY_TXD_ENCRYPT_MMIC: Generate MIC in hardware. */ enum txentry_desc_flags { ENTRY_TXD_RTS_FRAME, @@ -218,6 +241,10 @@ enum txentry_desc_flags { ENTRY_TXD_BURST, ENTRY_TXD_ACK, ENTRY_TXD_RETRY_MODE, + ENTRY_TXD_ENCRYPT, + ENTRY_TXD_ENCRYPT_PAIRWISE, + ENTRY_TXD_ENCRYPT_IV, + ENTRY_TXD_ENCRYPT_MMIC, }; /** @@ -236,6 +263,9 @@ enum txentry_desc_flags { * @ifs: IFS value. * @cw_min: cwmin value. * @cw_max: cwmax value. + * @cipher: Cipher type used for encryption. + * @key_idx: Key index used for encryption. + * @iv_offset: Position where IV should be inserted by hardware. */ struct txentry_desc { unsigned long flags; @@ -252,6 +282,10 @@ struct txentry_desc { short ifs; short cw_min; short cw_max; + + enum cipher cipher; + u16 key_idx; + u16 iv_offset; }; /** @@ -335,6 +369,7 @@ enum queue_index { * @length: Number of frames in queue. * @index: Index pointers to entry positions in the queue, * use &enum queue_index to get a specific index field. + * @txop: maximum burst time. * @aifs: The aifs value for outgoing frames (field ignored in RX queue). * @cw_min: The cw min value for outgoing frames (field ignored in RX queue). * @cw_max: The cw max value for outgoing frames (field ignored in RX queue). @@ -354,6 +389,7 @@ struct data_queue { unsigned short length; unsigned short index[Q_INDEX_MAX]; + unsigned short txop; unsigned short aifs; unsigned short cw_min; unsigned short cw_max; @@ -484,25 +520,51 @@ static inline int rt2x00queue_threshold(struct data_queue *queue) } /** - * rt2x00_desc_read - Read a word from the hardware descriptor. + * _rt2x00_desc_read - Read a word from the hardware descriptor. + * @desc: Base descriptor address + * @word: Word index from where the descriptor should be read. + * @value: Address where the descriptor value should be written into. + */ +static inline void _rt2x00_desc_read(__le32 *desc, const u8 word, __le32 *value) +{ + *value = desc[word]; +} + +/** + * rt2x00_desc_read - Read a word from the hardware descriptor, this + * function will take care of the byte ordering. * @desc: Base descriptor address * @word: Word index from where the descriptor should be read. * @value: Address where the descriptor value should be written into. */ static inline void rt2x00_desc_read(__le32 *desc, const u8 word, u32 *value) { - *value = le32_to_cpu(desc[word]); + __le32 tmp; + _rt2x00_desc_read(desc, word, &tmp); + *value = le32_to_cpu(tmp); +} + +/** + * rt2x00_desc_write - write a word to the hardware descriptor, this + * function will take care of the byte ordering. + * @desc: Base descriptor address + * @word: Word index from where the descriptor should be written. + * @value: Value that should be written into the descriptor. + */ +static inline void _rt2x00_desc_write(__le32 *desc, const u8 word, __le32 value) +{ + desc[word] = value; } /** - * rt2x00_desc_write - wrote a word to the hardware descriptor. + * rt2x00_desc_write - write a word to the hardware descriptor. * @desc: Base descriptor address * @word: Word index from where the descriptor should be written. * @value: Value that should be written into the descriptor. */ static inline void rt2x00_desc_write(__le32 *desc, const u8 word, u32 value) { - desc[word] = cpu_to_le32(value); + _rt2x00_desc_write(desc, word, cpu_to_le32(value)); } #endif /* RT2X00QUEUE_H */ diff --git a/drivers/net/wireless/rt2x00/rt2x00reg.h b/drivers/net/wireless/rt2x00/rt2x00reg.h index 2ea7866abd5..c2fba7c9f05 100644 --- a/drivers/net/wireless/rt2x00/rt2x00reg.h +++ b/drivers/net/wireless/rt2x00/rt2x00reg.h @@ -27,6 +27,16 @@ #define RT2X00REG_H /* + * RX crypto status + */ +enum rx_crypto { + RX_CRYPTO_SUCCESS = 0, + RX_CRYPTO_FAIL_ICV = 1, + RX_CRYPTO_FAIL_MIC = 2, + RX_CRYPTO_FAIL_KEY = 3, +}; + +/* * Antenna values */ enum antenna { @@ -104,7 +114,14 @@ enum cipher { */ CIPHER_CKIP64 = 5, CIPHER_CKIP128 = 6, - CIPHER_TKIP_NO_MIC = 7, + CIPHER_TKIP_NO_MIC = 7, /* Don't send to device */ + +/* + * Max cipher type. + * Note that CIPHER_NONE isn't counted, and CKIP64 and CKIP128 + * are excluded due to limitations in mac80211. + */ + CIPHER_MAX = 4, }; /* diff --git a/drivers/net/wireless/rt2x00/rt2x00rfkill.c b/drivers/net/wireless/rt2x00/rt2x00rfkill.c index 04b29716d35..8a2fefb365b 100644 --- a/drivers/net/wireless/rt2x00/rt2x00rfkill.c +++ b/drivers/net/wireless/rt2x00/rt2x00rfkill.c @@ -41,16 +41,16 @@ static int rt2x00rfkill_toggle_radio(void *data, enum rfkill_state state) /* * Only continue if there are enabled interfaces. */ - if (!test_bit(DEVICE_STARTED, &rt2x00dev->flags)) + if (!test_bit(DEVICE_STATE_STARTED, &rt2x00dev->flags)) return 0; if (state == RFKILL_STATE_UNBLOCKED) { INFO(rt2x00dev, "Hardware button pressed, enabling radio.\n"); - __clear_bit(DEVICE_DISABLED_RADIO_HW, &rt2x00dev->flags); + clear_bit(DEVICE_STATE_DISABLED_RADIO_HW, &rt2x00dev->flags); retval = rt2x00lib_enable_radio(rt2x00dev); } else if (state == RFKILL_STATE_SOFT_BLOCKED) { INFO(rt2x00dev, "Hardware button pressed, disabling radio.\n"); - __set_bit(DEVICE_DISABLED_RADIO_HW, &rt2x00dev->flags); + set_bit(DEVICE_STATE_DISABLED_RADIO_HW, &rt2x00dev->flags); rt2x00lib_disable_radio(rt2x00dev); } else { WARNING(rt2x00dev, "Received unexpected rfkill state %d.\n", diff --git a/drivers/net/wireless/rt2x00/rt2x00usb.c b/drivers/net/wireless/rt2x00/rt2x00usb.c index 2050227ea53..b73a7e0aeed 100644 --- a/drivers/net/wireless/rt2x00/rt2x00usb.c +++ b/drivers/net/wireless/rt2x00/rt2x00usb.c @@ -163,16 +163,11 @@ static void rt2x00usb_interrupt_txdone(struct urb *urb) struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev; struct txdone_entry_desc txdesc; - if (!test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags) || + if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags) || !test_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags)) return; /* - * Remove the descriptor data from the buffer. - */ - skb_pull(entry->skb, entry->queue->desc_size); - - /* * Obtain the status about this packet. * Note that when the status is 0 it does not mean the * frame was send out correctly. It only means the frame @@ -224,6 +219,12 @@ int rt2x00usb_write_tx_data(struct queue_entry *entry) entry->skb->data, length, rt2x00usb_interrupt_txdone, entry); + /* + * Make sure the skb->data pointer points to the frame, not the + * descriptor. + */ + skb_pull(entry->skb, entry->queue->desc_size); + return 0; } EXPORT_SYMBOL_GPL(rt2x00usb_write_tx_data); @@ -232,7 +233,7 @@ static inline void rt2x00usb_kick_tx_entry(struct queue_entry *entry) { struct queue_entry_priv_usb *entry_priv = entry->priv_data; - if (__test_and_clear_bit(ENTRY_DATA_PENDING, &entry->flags)) + if (test_and_clear_bit(ENTRY_DATA_PENDING, &entry->flags)) usb_submit_urb(entry_priv->urb, GFP_ATOMIC); } @@ -283,7 +284,7 @@ static void rt2x00usb_interrupt_rxdone(struct urb *urb) struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb); u8 rxd[32]; - if (!test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags) || + if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags) || !test_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags)) return; @@ -293,7 +294,7 @@ static void rt2x00usb_interrupt_rxdone(struct urb *urb) * a problem. */ if (urb->actual_length < entry->queue->desc_size || urb->status) { - __set_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags); + set_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags); usb_submit_urb(urb, GFP_ATOMIC); return; } @@ -361,7 +362,7 @@ void rt2x00usb_init_rxentry(struct rt2x00_dev *rt2x00dev, entry->skb->data, entry->skb->len, rt2x00usb_interrupt_rxdone, entry); - __set_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags); + set_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags); usb_submit_urb(entry_priv->urb, GFP_ATOMIC); } EXPORT_SYMBOL_GPL(rt2x00usb_init_rxentry); diff --git a/drivers/net/wireless/rt2x00/rt61pci.c b/drivers/net/wireless/rt2x00/rt61pci.c index 087e90b328c..d740f560ccd 100644 --- a/drivers/net/wireless/rt2x00/rt61pci.c +++ b/drivers/net/wireless/rt2x00/rt61pci.c @@ -38,6 +38,13 @@ #include "rt61pci.h" /* + * Allow hardware encryption to be disabled. + */ +static int modparam_nohwcrypt = 0; +module_param_named(nohwcrypt, modparam_nohwcrypt, bool, S_IRUGO); +MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption."); + +/* * Register access. * BBP and RF register require indirect register access, * and use the CSR registers PHY_CSR3 and PHY_CSR4 to achieve this. @@ -346,6 +353,204 @@ static void rt61pci_init_led(struct rt2x00_dev *rt2x00dev, /* * Configuration handlers. */ +static int rt61pci_config_shared_key(struct rt2x00_dev *rt2x00dev, + struct rt2x00lib_crypto *crypto, + struct ieee80211_key_conf *key) +{ + struct hw_key_entry key_entry; + struct rt2x00_field32 field; + u32 mask; + u32 reg; + + if (crypto->cmd == SET_KEY) { + /* + * rt2x00lib can't determine the correct free + * key_idx for shared keys. We have 1 register + * with key valid bits. The goal is simple, read + * the register, if that is full we have no slots + * left. + * Note that each BSS is allowed to have up to 4 + * shared keys, so put a mask over the allowed + * entries. + */ + mask = (0xf << crypto->bssidx); + + rt2x00pci_register_read(rt2x00dev, SEC_CSR0, ®); + reg &= mask; + + if (reg && reg == mask) + return -ENOSPC; + + key->hw_key_idx += reg ? (ffz(reg) - 1) : 0; + + /* + * Upload key to hardware + */ + memcpy(key_entry.key, crypto->key, + sizeof(key_entry.key)); + memcpy(key_entry.tx_mic, crypto->tx_mic, + sizeof(key_entry.tx_mic)); + memcpy(key_entry.rx_mic, crypto->rx_mic, + sizeof(key_entry.rx_mic)); + + reg = SHARED_KEY_ENTRY(key->hw_key_idx); + rt2x00pci_register_multiwrite(rt2x00dev, reg, + &key_entry, sizeof(key_entry)); + + /* + * The cipher types are stored over 2 registers. + * bssidx 0 and 1 keys are stored in SEC_CSR1 and + * bssidx 1 and 2 keys are stored in SEC_CSR5. + * Using the correct defines correctly will cause overhead, + * so just calculate the correct offset. + */ + if (key->hw_key_idx < 8) { + field.bit_offset = (3 * key->hw_key_idx); + field.bit_mask = 0x7 << field.bit_offset; + + rt2x00pci_register_read(rt2x00dev, SEC_CSR1, ®); + rt2x00_set_field32(®, field, crypto->cipher); + rt2x00pci_register_write(rt2x00dev, SEC_CSR1, reg); + } else { + field.bit_offset = (3 * (key->hw_key_idx - 8)); + field.bit_mask = 0x7 << field.bit_offset; + + rt2x00pci_register_read(rt2x00dev, SEC_CSR5, ®); + rt2x00_set_field32(®, field, crypto->cipher); + rt2x00pci_register_write(rt2x00dev, SEC_CSR5, reg); + } + + /* + * The driver does not support the IV/EIV generation + * in hardware. However it doesn't support the IV/EIV + * inside the ieee80211 frame either, but requires it + * to be provided seperately for the descriptor. + * rt2x00lib will cut the IV/EIV data out of all frames + * given to us by mac80211, but we must tell mac80211 + * to generate the IV/EIV data. + */ + key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV; + } + + /* + * SEC_CSR0 contains only single-bit fields to indicate + * a particular key is valid. Because using the FIELD32() + * defines directly will cause a lot of overhead we use + * a calculation to determine the correct bit directly. + */ + mask = 1 << key->hw_key_idx; + + rt2x00pci_register_read(rt2x00dev, SEC_CSR0, ®); + if (crypto->cmd == SET_KEY) + reg |= mask; + else if (crypto->cmd == DISABLE_KEY) + reg &= ~mask; + rt2x00pci_register_write(rt2x00dev, SEC_CSR0, reg); + + return 0; +} + +static int rt61pci_config_pairwise_key(struct rt2x00_dev *rt2x00dev, + struct rt2x00lib_crypto *crypto, + struct ieee80211_key_conf *key) +{ + struct hw_pairwise_ta_entry addr_entry; + struct hw_key_entry key_entry; + u32 mask; + u32 reg; + + if (crypto->cmd == SET_KEY) { + /* + * rt2x00lib can't determine the correct free + * key_idx for pairwise keys. We have 2 registers + * with key valid bits. The goal is simple, read + * the first register, if that is full move to + * the next register. + * When both registers are full, we drop the key, + * otherwise we use the first invalid entry. + */ + rt2x00pci_register_read(rt2x00dev, SEC_CSR2, ®); + if (reg && reg == ~0) { + key->hw_key_idx = 32; + rt2x00pci_register_read(rt2x00dev, SEC_CSR3, ®); + if (reg && reg == ~0) + return -ENOSPC; + } + + key->hw_key_idx += reg ? (ffz(reg) - 1) : 0; + + /* + * Upload key to hardware + */ + memcpy(key_entry.key, crypto->key, + sizeof(key_entry.key)); + memcpy(key_entry.tx_mic, crypto->tx_mic, + sizeof(key_entry.tx_mic)); + memcpy(key_entry.rx_mic, crypto->rx_mic, + sizeof(key_entry.rx_mic)); + + memset(&addr_entry, 0, sizeof(addr_entry)); + memcpy(&addr_entry, crypto->address, ETH_ALEN); + addr_entry.cipher = crypto->cipher; + + reg = PAIRWISE_KEY_ENTRY(key->hw_key_idx); + rt2x00pci_register_multiwrite(rt2x00dev, reg, + &key_entry, sizeof(key_entry)); + + reg = PAIRWISE_TA_ENTRY(key->hw_key_idx); + rt2x00pci_register_multiwrite(rt2x00dev, reg, + &addr_entry, sizeof(addr_entry)); + + /* + * Enable pairwise lookup table for given BSS idx, + * without this received frames will not be decrypted + * by the hardware. + */ + rt2x00pci_register_read(rt2x00dev, SEC_CSR4, ®); + reg |= (1 << crypto->bssidx); + rt2x00pci_register_write(rt2x00dev, SEC_CSR4, reg); + + /* + * The driver does not support the IV/EIV generation + * in hardware. However it doesn't support the IV/EIV + * inside the ieee80211 frame either, but requires it + * to be provided seperately for the descriptor. + * rt2x00lib will cut the IV/EIV data out of all frames + * given to us by mac80211, but we must tell mac80211 + * to generate the IV/EIV data. + */ + key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV; + } + + /* + * SEC_CSR2 and SEC_CSR3 contain only single-bit fields to indicate + * a particular key is valid. Because using the FIELD32() + * defines directly will cause a lot of overhead we use + * a calculation to determine the correct bit directly. + */ + if (key->hw_key_idx < 32) { + mask = 1 << key->hw_key_idx; + + rt2x00pci_register_read(rt2x00dev, SEC_CSR2, ®); + if (crypto->cmd == SET_KEY) + reg |= mask; + else if (crypto->cmd == DISABLE_KEY) + reg &= ~mask; + rt2x00pci_register_write(rt2x00dev, SEC_CSR2, reg); + } else { + mask = 1 << (key->hw_key_idx - 32); + + rt2x00pci_register_read(rt2x00dev, SEC_CSR3, ®); + if (crypto->cmd == SET_KEY) + reg |= mask; + else if (crypto->cmd == DISABLE_KEY) + reg &= ~mask; + rt2x00pci_register_write(rt2x00dev, SEC_CSR3, reg); + } + + return 0; +} + static void rt61pci_config_filter(struct rt2x00_dev *rt2x00dev, const unsigned int filter_flags) { @@ -440,6 +645,30 @@ static void rt61pci_config_erp(struct rt2x00_dev *rt2x00dev, rt2x00pci_register_write(rt2x00dev, TXRX_CSR4, reg); } + +static void rt61pci_config_lna_gain(struct rt2x00_dev *rt2x00dev, + struct rt2x00lib_conf *libconf) +{ + u16 eeprom; + short lna_gain = 0; + + if (libconf->band == IEEE80211_BAND_2GHZ) { + if (test_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags)) + lna_gain += 14; + + rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_OFFSET_BG, &eeprom); + lna_gain -= rt2x00_get_field16(eeprom, EEPROM_RSSI_OFFSET_BG_1); + } else { + if (test_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags)) + lna_gain += 14; + + rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_OFFSET_A, &eeprom); + lna_gain -= rt2x00_get_field16(eeprom, EEPROM_RSSI_OFFSET_A_1); + } + + rt2x00dev->lna_gain = lna_gain; +} + static void rt61pci_config_phymode(struct rt2x00_dev *rt2x00dev, const int basic_rate_mask) { @@ -758,6 +987,9 @@ static void rt61pci_config(struct rt2x00_dev *rt2x00dev, struct rt2x00lib_conf *libconf, const unsigned int flags) { + /* Always recalculate LNA gain before changing configuration */ + rt61pci_config_lna_gain(rt2x00dev, libconf); + if (flags & CONFIG_UPDATE_PHYMODE) rt61pci_config_phymode(rt2x00dev, libconf->basic_rates); if (flags & CONFIG_UPDATE_CHANNEL) @@ -1246,16 +1478,6 @@ static int rt61pci_init_registers(struct rt2x00_dev *rt2x00dev) rt2x00pci_register_write(rt2x00dev, M2H_CMD_DONE_CSR, 0xffffffff); - rt2x00pci_register_read(rt2x00dev, AC_TXOP_CSR0, ®); - rt2x00_set_field32(®, AC_TXOP_CSR0_AC0_TX_OP, 0); - rt2x00_set_field32(®, AC_TXOP_CSR0_AC1_TX_OP, 0); - rt2x00pci_register_write(rt2x00dev, AC_TXOP_CSR0, reg); - - rt2x00pci_register_read(rt2x00dev, AC_TXOP_CSR1, ®); - rt2x00_set_field32(®, AC_TXOP_CSR1_AC2_TX_OP, 192); - rt2x00_set_field32(®, AC_TXOP_CSR1_AC3_TX_OP, 48); - rt2x00pci_register_write(rt2x00dev, AC_TXOP_CSR1, reg); - /* * Clear all beacons * For the Beacon base registers we only need to clear @@ -1533,8 +1755,8 @@ static int rt61pci_set_device_state(struct rt2x00_dev *rt2x00dev, * TX descriptor initialization */ static void rt61pci_write_tx_desc(struct rt2x00_dev *rt2x00dev, - struct sk_buff *skb, - struct txentry_desc *txdesc) + struct sk_buff *skb, + struct txentry_desc *txdesc) { struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb); __le32 *txd = skbdesc->desc; @@ -1548,7 +1770,7 @@ static void rt61pci_write_tx_desc(struct rt2x00_dev *rt2x00dev, rt2x00_set_field32(&word, TXD_W1_AIFSN, txdesc->aifs); rt2x00_set_field32(&word, TXD_W1_CWMIN, txdesc->cw_min); rt2x00_set_field32(&word, TXD_W1_CWMAX, txdesc->cw_max); - rt2x00_set_field32(&word, TXD_W1_IV_OFFSET, IEEE80211_HEADER); + rt2x00_set_field32(&word, TXD_W1_IV_OFFSET, txdesc->iv_offset); rt2x00_set_field32(&word, TXD_W1_HW_SEQUENCE, test_bit(ENTRY_TXD_GENERATE_SEQ, &txdesc->flags)); rt2x00_set_field32(&word, TXD_W1_BUFFER_COUNT, 1); @@ -1561,6 +1783,11 @@ static void rt61pci_write_tx_desc(struct rt2x00_dev *rt2x00dev, rt2x00_set_field32(&word, TXD_W2_PLCP_LENGTH_HIGH, txdesc->length_high); rt2x00_desc_write(txd, 2, word); + if (test_bit(ENTRY_TXD_ENCRYPT, &txdesc->flags)) { + _rt2x00_desc_write(txd, 3, skbdesc->iv); + _rt2x00_desc_write(txd, 4, skbdesc->eiv); + } + rt2x00_desc_read(txd, 5, &word); rt2x00_set_field32(&word, TXD_W5_PID_TYPE, skbdesc->entry->queue->qid); rt2x00_set_field32(&word, TXD_W5_PID_SUBTYPE, @@ -1595,11 +1822,15 @@ static void rt61pci_write_tx_desc(struct rt2x00_dev *rt2x00dev, rt2x00_set_field32(&word, TXD_W0_IFS, txdesc->ifs); rt2x00_set_field32(&word, TXD_W0_RETRY_MODE, test_bit(ENTRY_TXD_RETRY_MODE, &txdesc->flags)); - rt2x00_set_field32(&word, TXD_W0_TKIP_MIC, 0); + rt2x00_set_field32(&word, TXD_W0_TKIP_MIC, + test_bit(ENTRY_TXD_ENCRYPT_MMIC, &txdesc->flags)); + rt2x00_set_field32(&word, TXD_W0_KEY_TABLE, + test_bit(ENTRY_TXD_ENCRYPT_PAIRWISE, &txdesc->flags)); + rt2x00_set_field32(&word, TXD_W0_KEY_INDEX, txdesc->key_idx); rt2x00_set_field32(&word, TXD_W0_DATABYTE_COUNT, skb->len); rt2x00_set_field32(&word, TXD_W0_BURST, test_bit(ENTRY_TXD_BURST, &txdesc->flags)); - rt2x00_set_field32(&word, TXD_W0_CIPHER_ALG, CIPHER_NONE); + rt2x00_set_field32(&word, TXD_W0_CIPHER_ALG, txdesc->cipher); rt2x00_desc_write(txd, 0, word); } @@ -1676,40 +1907,27 @@ static void rt61pci_kick_tx_queue(struct rt2x00_dev *rt2x00dev, */ static int rt61pci_agc_to_rssi(struct rt2x00_dev *rt2x00dev, int rxd_w1) { - u16 eeprom; - u8 offset; + u8 offset = rt2x00dev->lna_gain; u8 lna; lna = rt2x00_get_field32(rxd_w1, RXD_W1_RSSI_LNA); switch (lna) { case 3: - offset = 90; + offset += 90; break; case 2: - offset = 74; + offset += 74; break; case 1: - offset = 64; + offset += 64; break; default: return 0; } if (rt2x00dev->rx_status.band == IEEE80211_BAND_5GHZ) { - if (test_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags)) - offset += 14; - if (lna == 3 || lna == 2) offset += 10; - - rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_OFFSET_A, &eeprom); - offset -= rt2x00_get_field16(eeprom, EEPROM_RSSI_OFFSET_A_1); - } else { - if (test_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags)) - offset += 14; - - rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_OFFSET_BG, &eeprom); - offset -= rt2x00_get_field16(eeprom, EEPROM_RSSI_OFFSET_BG_1); } return rt2x00_get_field32(rxd_w1, RXD_W1_RSSI_AGC) * 2 - offset; @@ -1718,6 +1936,7 @@ static int rt61pci_agc_to_rssi(struct rt2x00_dev *rt2x00dev, int rxd_w1) static void rt61pci_fill_rxdone(struct queue_entry *entry, struct rxdone_entry_desc *rxdesc) { + struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev; struct queue_entry_priv_pci *entry_priv = entry->priv_data; u32 word0; u32 word1; @@ -1728,6 +1947,38 @@ static void rt61pci_fill_rxdone(struct queue_entry *entry, if (rt2x00_get_field32(word0, RXD_W0_CRC_ERROR)) rxdesc->flags |= RX_FLAG_FAILED_FCS_CRC; + if (test_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags)) { + rxdesc->cipher = + rt2x00_get_field32(word0, RXD_W0_CIPHER_ALG); + rxdesc->cipher_status = + rt2x00_get_field32(word0, RXD_W0_CIPHER_ERROR); + } + + if (rxdesc->cipher != CIPHER_NONE) { + _rt2x00_desc_read(entry_priv->desc, 2, &rxdesc->iv); + _rt2x00_desc_read(entry_priv->desc, 3, &rxdesc->eiv); + _rt2x00_desc_read(entry_priv->desc, 4, &rxdesc->icv); + + /* + * Hardware has stripped IV/EIV data from 802.11 frame during + * decryption. It has provided the data seperately but rt2x00lib + * should decide if it should be reinserted. + */ + rxdesc->flags |= RX_FLAG_IV_STRIPPED; + + /* + * FIXME: Legacy driver indicates that the frame does + * contain the Michael Mic. Unfortunately, in rt2x00 + * the MIC seems to be missing completely... + */ + rxdesc->flags |= RX_FLAG_MMIC_STRIPPED; + + if (rxdesc->cipher_status == RX_CRYPTO_SUCCESS) + rxdesc->flags |= RX_FLAG_DECRYPTED; + else if (rxdesc->cipher_status == RX_CRYPTO_FAIL_MIC) + rxdesc->flags |= RX_FLAG_MMIC_ERROR; + } + /* * Obtain the status about this packet. * When frame was received with an OFDM bitrate, @@ -1735,11 +1986,13 @@ static void rt61pci_fill_rxdone(struct queue_entry *entry, * a CCK bitrate the signal is the rate in 100kbit/s. */ rxdesc->signal = rt2x00_get_field32(word1, RXD_W1_SIGNAL); - rxdesc->rssi = rt61pci_agc_to_rssi(entry->queue->rt2x00dev, word1); + rxdesc->rssi = rt61pci_agc_to_rssi(rt2x00dev, word1); rxdesc->size = rt2x00_get_field32(word0, RXD_W0_DATABYTE_COUNT); if (rt2x00_get_field32(word0, RXD_W0_OFDM)) rxdesc->dev_flags |= RXDONE_SIGNAL_PLCP; + else + rxdesc->dev_flags |= RXDONE_SIGNAL_BITRATE; if (rt2x00_get_field32(word0, RXD_W0_MY_BSS)) rxdesc->dev_flags |= RXDONE_MY_BSS; } @@ -1860,7 +2113,7 @@ static irqreturn_t rt61pci_interrupt(int irq, void *dev_instance) if (!reg && !reg_mcu) return IRQ_NONE; - if (!test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags)) + if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags)) return IRQ_HANDLED; /* @@ -2274,10 +2527,11 @@ static const struct rf_channel rf_vals_seq[] = { { 46, 0x00002ccc, 0x000049a6, 0x0009be55, 0x000c0a23 }, }; -static void rt61pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev) +static int rt61pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev) { struct hw_mode_spec *spec = &rt2x00dev->spec; - u8 *txpower; + struct channel_info *info; + char *tx_power; unsigned int i; /* @@ -2294,20 +2548,10 @@ static void rt61pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev) EEPROM_MAC_ADDR_0)); /* - * Convert tx_power array in eeprom. - */ - txpower = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_G_START); - for (i = 0; i < 14; i++) - txpower[i] = TXPOWER_FROM_DEV(txpower[i]); - - /* * Initialize hw_mode information. */ spec->supported_bands = SUPPORT_BAND_2GHZ; spec->supported_rates = SUPPORT_RATE_CCK | SUPPORT_RATE_OFDM; - spec->tx_power_a = NULL; - spec->tx_power_bg = txpower; - spec->tx_power_default = DEFAULT_TXPOWER; if (!test_bit(CONFIG_RF_SEQUENCE, &rt2x00dev->flags)) { spec->num_channels = 14; @@ -2321,13 +2565,28 @@ static void rt61pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev) rt2x00_rf(&rt2x00dev->chip, RF5325)) { spec->supported_bands |= SUPPORT_BAND_5GHZ; spec->num_channels = ARRAY_SIZE(rf_vals_seq); + } - txpower = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_A_START); - for (i = 0; i < 14; i++) - txpower[i] = TXPOWER_FROM_DEV(txpower[i]); + /* + * Create channel information array + */ + info = kzalloc(spec->num_channels * sizeof(*info), GFP_KERNEL); + if (!info) + return -ENOMEM; - spec->tx_power_a = txpower; + spec->channels_info = info; + + tx_power = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_G_START); + for (i = 0; i < 14; i++) + info[i].tx_power1 = TXPOWER_FROM_DEV(tx_power[i]); + + if (spec->num_channels > 14) { + tx_power = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_A_START); + for (i = 14; i < spec->num_channels; i++) + info[i].tx_power1 = TXPOWER_FROM_DEV(tx_power[i]); } + + return 0; } static int rt61pci_probe_hw(struct rt2x00_dev *rt2x00dev) @@ -2348,13 +2607,17 @@ static int rt61pci_probe_hw(struct rt2x00_dev *rt2x00dev) /* * Initialize hw specifications. */ - rt61pci_probe_hw_mode(rt2x00dev); + retval = rt61pci_probe_hw_mode(rt2x00dev); + if (retval) + return retval; /* * This device requires firmware and DMA mapped skbs. */ __set_bit(DRIVER_REQUIRE_FIRMWARE, &rt2x00dev->flags); __set_bit(DRIVER_REQUIRE_DMA, &rt2x00dev->flags); + if (!modparam_nohwcrypt) + __set_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags); /* * Set the rssi offset. @@ -2381,6 +2644,63 @@ static int rt61pci_set_retry_limit(struct ieee80211_hw *hw, return 0; } +static int rt61pci_conf_tx(struct ieee80211_hw *hw, u16 queue_idx, + const struct ieee80211_tx_queue_params *params) +{ + struct rt2x00_dev *rt2x00dev = hw->priv; + struct data_queue *queue; + struct rt2x00_field32 field; + int retval; + u32 reg; + + /* + * First pass the configuration through rt2x00lib, that will + * update the queue settings and validate the input. After that + * we are free to update the registers based on the value + * in the queue parameter. + */ + retval = rt2x00mac_conf_tx(hw, queue_idx, params); + if (retval) + return retval; + + queue = rt2x00queue_get_queue(rt2x00dev, queue_idx); + + /* Update WMM TXOP register */ + if (queue_idx < 2) { + field.bit_offset = queue_idx * 16; + field.bit_mask = 0xffff << field.bit_offset; + + rt2x00pci_register_read(rt2x00dev, AC_TXOP_CSR0, ®); + rt2x00_set_field32(®, field, queue->txop); + rt2x00pci_register_write(rt2x00dev, AC_TXOP_CSR0, reg); + } else if (queue_idx < 4) { + field.bit_offset = (queue_idx - 2) * 16; + field.bit_mask = 0xffff << field.bit_offset; + + rt2x00pci_register_read(rt2x00dev, AC_TXOP_CSR1, ®); + rt2x00_set_field32(®, field, queue->txop); + rt2x00pci_register_write(rt2x00dev, AC_TXOP_CSR1, reg); + } + + /* Update WMM registers */ + field.bit_offset = queue_idx * 4; + field.bit_mask = 0xf << field.bit_offset; + + rt2x00pci_register_read(rt2x00dev, AIFSN_CSR, ®); + rt2x00_set_field32(®, field, queue->aifs); + rt2x00pci_register_write(rt2x00dev, AIFSN_CSR, reg); + + rt2x00pci_register_read(rt2x00dev, CWMIN_CSR, ®); + rt2x00_set_field32(®, field, queue->cw_min); + rt2x00pci_register_write(rt2x00dev, CWMIN_CSR, reg); + + rt2x00pci_register_read(rt2x00dev, CWMAX_CSR, ®); + rt2x00_set_field32(®, field, queue->cw_max); + rt2x00pci_register_write(rt2x00dev, CWMAX_CSR, reg); + + return 0; +} + static u64 rt61pci_get_tsf(struct ieee80211_hw *hw) { struct rt2x00_dev *rt2x00dev = hw->priv; @@ -2404,10 +2724,11 @@ static const struct ieee80211_ops rt61pci_mac80211_ops = { .config = rt2x00mac_config, .config_interface = rt2x00mac_config_interface, .configure_filter = rt2x00mac_configure_filter, + .set_key = rt2x00mac_set_key, .get_stats = rt2x00mac_get_stats, .set_retry_limit = rt61pci_set_retry_limit, .bss_info_changed = rt2x00mac_bss_info_changed, - .conf_tx = rt2x00mac_conf_tx, + .conf_tx = rt61pci_conf_tx, .get_tx_stats = rt2x00mac_get_tx_stats, .get_tsf = rt61pci_get_tsf, }; @@ -2432,6 +2753,8 @@ static const struct rt2x00lib_ops rt61pci_rt2x00_ops = { .write_beacon = rt61pci_write_beacon, .kick_tx_queue = rt61pci_kick_tx_queue, .fill_rxdone = rt61pci_fill_rxdone, + .config_shared_key = rt61pci_config_shared_key, + .config_pairwise_key = rt61pci_config_pairwise_key, .config_filter = rt61pci_config_filter, .config_intf = rt61pci_config_intf, .config_erp = rt61pci_config_erp, diff --git a/drivers/net/wireless/rt2x00/rt61pci.h b/drivers/net/wireless/rt2x00/rt61pci.h index 1004d5b899e..8ec1451308c 100644 --- a/drivers/net/wireless/rt2x00/rt61pci.h +++ b/drivers/net/wireless/rt2x00/rt61pci.h @@ -134,6 +134,16 @@ #define PAIRWISE_KEY_TABLE_BASE 0x1200 #define PAIRWISE_TA_TABLE_BASE 0x1a00 +#define SHARED_KEY_ENTRY(__idx) \ + ( SHARED_KEY_TABLE_BASE + \ + ((__idx) * sizeof(struct hw_key_entry)) ) +#define PAIRWISE_KEY_ENTRY(__idx) \ + ( PAIRWISE_KEY_TABLE_BASE + \ + ((__idx) * sizeof(struct hw_key_entry)) ) +#define PAIRWISE_TA_ENTRY(__idx) \ + ( PAIRWISE_TA_TABLE_BASE + \ + ((__idx) * sizeof(struct hw_pairwise_ta_entry)) ) + struct hw_key_entry { u8 key[16]; u8 tx_mic[8]; @@ -142,7 +152,8 @@ struct hw_key_entry { struct hw_pairwise_ta_entry { u8 address[6]; - u8 reserved[2]; + u8 cipher; + u8 reserved; } __attribute__ ((packed)); /* @@ -662,6 +673,10 @@ struct hw_pairwise_ta_entry { * SEC_CSR4: Pairwise key table lookup control. */ #define SEC_CSR4 0x30b0 +#define SEC_CSR4_ENABLE_BSS0 FIELD32(0x00000001) +#define SEC_CSR4_ENABLE_BSS1 FIELD32(0x00000002) +#define SEC_CSR4_ENABLE_BSS2 FIELD32(0x00000004) +#define SEC_CSR4_ENABLE_BSS3 FIELD32(0x00000008) /* * SEC_CSR5: shared key table security mode register. @@ -1428,8 +1443,10 @@ struct hw_pairwise_ta_entry { /* * Word4 + * ICV: Received ICV of originally encrypted. + * NOTE: This is a guess, the official definition is "reserved" */ -#define RXD_W4_RESERVED FIELD32(0xffffffff) +#define RXD_W4_ICV FIELD32(0xffffffff) /* * the above 20-byte is called RXINFO and will be DMAed to MAC RX block @@ -1465,17 +1482,10 @@ struct hw_pairwise_ta_entry { #define MAX_TXPOWER 31 #define DEFAULT_TXPOWER 24 -#define TXPOWER_FROM_DEV(__txpower) \ -({ \ - ((__txpower) > MAX_TXPOWER) ? \ - DEFAULT_TXPOWER : (__txpower); \ -}) - -#define TXPOWER_TO_DEV(__txpower) \ -({ \ - ((__txpower) <= MIN_TXPOWER) ? MIN_TXPOWER : \ - (((__txpower) >= MAX_TXPOWER) ? MAX_TXPOWER : \ - (__txpower)); \ -}) +#define TXPOWER_FROM_DEV(__txpower) \ + (((u8)(__txpower)) > MAX_TXPOWER) ? DEFAULT_TXPOWER : (__txpower) + +#define TXPOWER_TO_DEV(__txpower) \ + clamp_t(char, __txpower, MIN_TXPOWER, MAX_TXPOWER) #endif /* RT61PCI_H */ diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c index 9761eaaa08b..e698ae0efbc 100644 --- a/drivers/net/wireless/rt2x00/rt73usb.c +++ b/drivers/net/wireless/rt2x00/rt73usb.c @@ -37,6 +37,13 @@ #include "rt73usb.h" /* + * Allow hardware encryption to be disabled. + */ +static int modparam_nohwcrypt = 0; +module_param_named(nohwcrypt, modparam_nohwcrypt, bool, S_IRUGO); +MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption."); + +/* * Register access. * All access to the CSR registers will go through the methods * rt73usb_register_read and rt73usb_register_write. @@ -357,6 +364,219 @@ static void rt73usb_init_led(struct rt2x00_dev *rt2x00dev, /* * Configuration handlers. */ +static int rt73usb_config_shared_key(struct rt2x00_dev *rt2x00dev, + struct rt2x00lib_crypto *crypto, + struct ieee80211_key_conf *key) +{ + struct hw_key_entry key_entry; + struct rt2x00_field32 field; + int timeout; + u32 mask; + u32 reg; + + if (crypto->cmd == SET_KEY) { + /* + * rt2x00lib can't determine the correct free + * key_idx for shared keys. We have 1 register + * with key valid bits. The goal is simple, read + * the register, if that is full we have no slots + * left. + * Note that each BSS is allowed to have up to 4 + * shared keys, so put a mask over the allowed + * entries. + */ + mask = (0xf << crypto->bssidx); + + rt73usb_register_read(rt2x00dev, SEC_CSR0, ®); + reg &= mask; + + if (reg && reg == mask) + return -ENOSPC; + + key->hw_key_idx += reg ? (ffz(reg) - 1) : 0; + + /* + * Upload key to hardware + */ + memcpy(key_entry.key, crypto->key, + sizeof(key_entry.key)); + memcpy(key_entry.tx_mic, crypto->tx_mic, + sizeof(key_entry.tx_mic)); + memcpy(key_entry.rx_mic, crypto->rx_mic, + sizeof(key_entry.rx_mic)); + + reg = SHARED_KEY_ENTRY(key->hw_key_idx); + timeout = REGISTER_TIMEOUT32(sizeof(key_entry)); + rt2x00usb_vendor_request_large_buff(rt2x00dev, USB_MULTI_WRITE, + USB_VENDOR_REQUEST_OUT, reg, + &key_entry, + sizeof(key_entry), + timeout); + + /* + * The cipher types are stored over 2 registers. + * bssidx 0 and 1 keys are stored in SEC_CSR1 and + * bssidx 1 and 2 keys are stored in SEC_CSR5. + * Using the correct defines correctly will cause overhead, + * so just calculate the correct offset. + */ + if (key->hw_key_idx < 8) { + field.bit_offset = (3 * key->hw_key_idx); + field.bit_mask = 0x7 << field.bit_offset; + + rt73usb_register_read(rt2x00dev, SEC_CSR1, ®); + rt2x00_set_field32(®, field, crypto->cipher); + rt73usb_register_write(rt2x00dev, SEC_CSR1, reg); + } else { + field.bit_offset = (3 * (key->hw_key_idx - 8)); + field.bit_mask = 0x7 << field.bit_offset; + + rt73usb_register_read(rt2x00dev, SEC_CSR5, ®); + rt2x00_set_field32(®, field, crypto->cipher); + rt73usb_register_write(rt2x00dev, SEC_CSR5, reg); + } + + /* + * The driver does not support the IV/EIV generation + * in hardware. However it doesn't support the IV/EIV + * inside the ieee80211 frame either, but requires it + * to be provided seperately for the descriptor. + * rt2x00lib will cut the IV/EIV data out of all frames + * given to us by mac80211, but we must tell mac80211 + * to generate the IV/EIV data. + */ + key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV; + } + + /* + * SEC_CSR0 contains only single-bit fields to indicate + * a particular key is valid. Because using the FIELD32() + * defines directly will cause a lot of overhead we use + * a calculation to determine the correct bit directly. + */ + mask = 1 << key->hw_key_idx; + + rt73usb_register_read(rt2x00dev, SEC_CSR0, ®); + if (crypto->cmd == SET_KEY) + reg |= mask; + else if (crypto->cmd == DISABLE_KEY) + reg &= ~mask; + rt73usb_register_write(rt2x00dev, SEC_CSR0, reg); + + return 0; +} + +static int rt73usb_config_pairwise_key(struct rt2x00_dev *rt2x00dev, + struct rt2x00lib_crypto *crypto, + struct ieee80211_key_conf *key) +{ + struct hw_pairwise_ta_entry addr_entry; + struct hw_key_entry key_entry; + int timeout; + u32 mask; + u32 reg; + + if (crypto->cmd == SET_KEY) { + /* + * rt2x00lib can't determine the correct free + * key_idx for pairwise keys. We have 2 registers + * with key valid bits. The goal is simple, read + * the first register, if that is full move to + * the next register. + * When both registers are full, we drop the key, + * otherwise we use the first invalid entry. + */ + rt73usb_register_read(rt2x00dev, SEC_CSR2, ®); + if (reg && reg == ~0) { + key->hw_key_idx = 32; + rt73usb_register_read(rt2x00dev, SEC_CSR3, ®); + if (reg && reg == ~0) + return -ENOSPC; + } + + key->hw_key_idx += reg ? (ffz(reg) - 1) : 0; + + /* + * Upload key to hardware + */ + memcpy(key_entry.key, crypto->key, + sizeof(key_entry.key)); + memcpy(key_entry.tx_mic, crypto->tx_mic, + sizeof(key_entry.tx_mic)); + memcpy(key_entry.rx_mic, crypto->rx_mic, + sizeof(key_entry.rx_mic)); + + reg = PAIRWISE_KEY_ENTRY(key->hw_key_idx); + timeout = REGISTER_TIMEOUT32(sizeof(key_entry)); + rt2x00usb_vendor_request_large_buff(rt2x00dev, USB_MULTI_WRITE, + USB_VENDOR_REQUEST_OUT, reg, + &key_entry, + sizeof(key_entry), + timeout); + + /* + * Send the address and cipher type to the hardware register. + * This data fits within the CSR cache size, so we can use + * rt73usb_register_multiwrite() directly. + */ + memset(&addr_entry, 0, sizeof(addr_entry)); + memcpy(&addr_entry, crypto->address, ETH_ALEN); + addr_entry.cipher = crypto->cipher; + + reg = PAIRWISE_TA_ENTRY(key->hw_key_idx); + rt73usb_register_multiwrite(rt2x00dev, reg, + &addr_entry, sizeof(addr_entry)); + + /* + * Enable pairwise lookup table for given BSS idx, + * without this received frames will not be decrypted + * by the hardware. + */ + rt73usb_register_read(rt2x00dev, SEC_CSR4, ®); + reg |= (1 << crypto->bssidx); + rt73usb_register_write(rt2x00dev, SEC_CSR4, reg); + + /* + * The driver does not support the IV/EIV generation + * in hardware. However it doesn't support the IV/EIV + * inside the ieee80211 frame either, but requires it + * to be provided seperately for the descriptor. + * rt2x00lib will cut the IV/EIV data out of all frames + * given to us by mac80211, but we must tell mac80211 + * to generate the IV/EIV data. + */ + key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV; + } + + /* + * SEC_CSR2 and SEC_CSR3 contain only single-bit fields to indicate + * a particular key is valid. Because using the FIELD32() + * defines directly will cause a lot of overhead we use + * a calculation to determine the correct bit directly. + */ + if (key->hw_key_idx < 32) { + mask = 1 << key->hw_key_idx; + + rt73usb_register_read(rt2x00dev, SEC_CSR2, ®); + if (crypto->cmd == SET_KEY) + reg |= mask; + else if (crypto->cmd == DISABLE_KEY) + reg &= ~mask; + rt73usb_register_write(rt2x00dev, SEC_CSR2, reg); + } else { + mask = 1 << (key->hw_key_idx - 32); + + rt73usb_register_read(rt2x00dev, SEC_CSR3, ®); + if (crypto->cmd == SET_KEY) + reg |= mask; + else if (crypto->cmd == DISABLE_KEY) + reg &= ~mask; + rt73usb_register_write(rt2x00dev, SEC_CSR3, reg); + } + + return 0; +} + static void rt73usb_config_filter(struct rt2x00_dev *rt2x00dev, const unsigned int filter_flags) { @@ -451,6 +671,26 @@ static void rt73usb_config_erp(struct rt2x00_dev *rt2x00dev, rt73usb_register_write(rt2x00dev, TXRX_CSR4, reg); } +static void rt73usb_config_lna_gain(struct rt2x00_dev *rt2x00dev, + struct rt2x00lib_conf *libconf) +{ + u16 eeprom; + short lna_gain = 0; + + if (libconf->band == IEEE80211_BAND_2GHZ) { + if (test_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags)) + lna_gain += 14; + + rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_OFFSET_BG, &eeprom); + lna_gain -= rt2x00_get_field16(eeprom, EEPROM_RSSI_OFFSET_BG_1); + } else { + rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_OFFSET_A, &eeprom); + lna_gain -= rt2x00_get_field16(eeprom, EEPROM_RSSI_OFFSET_A_1); + } + + rt2x00dev->lna_gain = lna_gain; +} + static void rt73usb_config_phymode(struct rt2x00_dev *rt2x00dev, const int basic_rate_mask) { @@ -705,6 +945,9 @@ static void rt73usb_config(struct rt2x00_dev *rt2x00dev, struct rt2x00lib_conf *libconf, const unsigned int flags) { + /* Always recalculate LNA gain before changing configuration */ + rt73usb_config_lna_gain(rt2x00dev, libconf); + if (flags & CONFIG_UPDATE_PHYMODE) rt73usb_config_phymode(rt2x00dev, libconf->basic_rates); if (flags & CONFIG_UPDATE_CHANNEL) @@ -1034,16 +1277,6 @@ static int rt73usb_init_registers(struct rt2x00_dev *rt2x00dev) rt73usb_register_write(rt2x00dev, PHY_CSR6, 0x00080606); rt73usb_register_write(rt2x00dev, PHY_CSR7, 0x00000408); - rt73usb_register_read(rt2x00dev, AC_TXOP_CSR0, ®); - rt2x00_set_field32(®, AC_TXOP_CSR0_AC0_TX_OP, 0); - rt2x00_set_field32(®, AC_TXOP_CSR0_AC1_TX_OP, 0); - rt73usb_register_write(rt2x00dev, AC_TXOP_CSR0, reg); - - rt73usb_register_read(rt2x00dev, AC_TXOP_CSR1, ®); - rt2x00_set_field32(®, AC_TXOP_CSR1_AC2_TX_OP, 192); - rt2x00_set_field32(®, AC_TXOP_CSR1_AC3_TX_OP, 48); - rt73usb_register_write(rt2x00dev, AC_TXOP_CSR1, reg); - rt73usb_register_read(rt2x00dev, MAC_CSR9, ®); rt2x00_set_field32(®, MAC_CSR9_CW_SELECT, 0); rt73usb_register_write(rt2x00dev, MAC_CSR9, reg); @@ -1265,8 +1498,8 @@ static int rt73usb_set_device_state(struct rt2x00_dev *rt2x00dev, * TX descriptor initialization */ static void rt73usb_write_tx_desc(struct rt2x00_dev *rt2x00dev, - struct sk_buff *skb, - struct txentry_desc *txdesc) + struct sk_buff *skb, + struct txentry_desc *txdesc) { struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb); __le32 *txd = skbdesc->desc; @@ -1280,7 +1513,7 @@ static void rt73usb_write_tx_desc(struct rt2x00_dev *rt2x00dev, rt2x00_set_field32(&word, TXD_W1_AIFSN, txdesc->aifs); rt2x00_set_field32(&word, TXD_W1_CWMIN, txdesc->cw_min); rt2x00_set_field32(&word, TXD_W1_CWMAX, txdesc->cw_max); - rt2x00_set_field32(&word, TXD_W1_IV_OFFSET, IEEE80211_HEADER); + rt2x00_set_field32(&word, TXD_W1_IV_OFFSET, txdesc->iv_offset); rt2x00_set_field32(&word, TXD_W1_HW_SEQUENCE, test_bit(ENTRY_TXD_GENERATE_SEQ, &txdesc->flags)); rt2x00_desc_write(txd, 1, word); @@ -1292,6 +1525,11 @@ static void rt73usb_write_tx_desc(struct rt2x00_dev *rt2x00dev, rt2x00_set_field32(&word, TXD_W2_PLCP_LENGTH_HIGH, txdesc->length_high); rt2x00_desc_write(txd, 2, word); + if (test_bit(ENTRY_TXD_ENCRYPT, &txdesc->flags)) { + _rt2x00_desc_write(txd, 3, skbdesc->iv); + _rt2x00_desc_write(txd, 4, skbdesc->eiv); + } + rt2x00_desc_read(txd, 5, &word); rt2x00_set_field32(&word, TXD_W5_TX_POWER, TXPOWER_TO_DEV(rt2x00dev->tx_power)); @@ -1313,12 +1551,15 @@ static void rt73usb_write_tx_desc(struct rt2x00_dev *rt2x00dev, rt2x00_set_field32(&word, TXD_W0_IFS, txdesc->ifs); rt2x00_set_field32(&word, TXD_W0_RETRY_MODE, test_bit(ENTRY_TXD_RETRY_MODE, &txdesc->flags)); - rt2x00_set_field32(&word, TXD_W0_TKIP_MIC, 0); - rt2x00_set_field32(&word, TXD_W0_DATABYTE_COUNT, - skb->len - skbdesc->desc_len); + rt2x00_set_field32(&word, TXD_W0_TKIP_MIC, + test_bit(ENTRY_TXD_ENCRYPT_MMIC, &txdesc->flags)); + rt2x00_set_field32(&word, TXD_W0_KEY_TABLE, + test_bit(ENTRY_TXD_ENCRYPT_PAIRWISE, &txdesc->flags)); + rt2x00_set_field32(&word, TXD_W0_KEY_INDEX, txdesc->key_idx); + rt2x00_set_field32(&word, TXD_W0_DATABYTE_COUNT, skb->len); rt2x00_set_field32(&word, TXD_W0_BURST2, test_bit(ENTRY_TXD_BURST, &txdesc->flags)); - rt2x00_set_field32(&word, TXD_W0_CIPHER_ALG, CIPHER_NONE); + rt2x00_set_field32(&word, TXD_W0_CIPHER_ALG, txdesc->cipher); rt2x00_desc_write(txd, 0, word); } @@ -1422,20 +1663,19 @@ static void rt73usb_kick_tx_queue(struct rt2x00_dev *rt2x00dev, */ static int rt73usb_agc_to_rssi(struct rt2x00_dev *rt2x00dev, int rxd_w1) { - u16 eeprom; - u8 offset; + u8 offset = rt2x00dev->lna_gain; u8 lna; lna = rt2x00_get_field32(rxd_w1, RXD_W1_RSSI_LNA); switch (lna) { case 3: - offset = 90; + offset += 90; break; case 2: - offset = 74; + offset += 74; break; case 1: - offset = 64; + offset += 64; break; default: return 0; @@ -1451,15 +1691,6 @@ static int rt73usb_agc_to_rssi(struct rt2x00_dev *rt2x00dev, int rxd_w1) else if (lna == 2) offset += 8; } - - rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_OFFSET_A, &eeprom); - offset -= rt2x00_get_field16(eeprom, EEPROM_RSSI_OFFSET_A_1); - } else { - if (test_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags)) - offset += 14; - - rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_OFFSET_BG, &eeprom); - offset -= rt2x00_get_field16(eeprom, EEPROM_RSSI_OFFSET_BG_1); } return rt2x00_get_field32(rxd_w1, RXD_W1_RSSI_AGC) * 2 - offset; @@ -1468,6 +1699,7 @@ static int rt73usb_agc_to_rssi(struct rt2x00_dev *rt2x00dev, int rxd_w1) static void rt73usb_fill_rxdone(struct queue_entry *entry, struct rxdone_entry_desc *rxdesc) { + struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev; struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb); __le32 *rxd = (__le32 *)entry->skb->data; u32 word0; @@ -1489,6 +1721,38 @@ static void rt73usb_fill_rxdone(struct queue_entry *entry, if (rt2x00_get_field32(word0, RXD_W0_CRC_ERROR)) rxdesc->flags |= RX_FLAG_FAILED_FCS_CRC; + if (test_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags)) { + rxdesc->cipher = + rt2x00_get_field32(word0, RXD_W0_CIPHER_ALG); + rxdesc->cipher_status = + rt2x00_get_field32(word0, RXD_W0_CIPHER_ERROR); + } + + if (rxdesc->cipher != CIPHER_NONE) { + _rt2x00_desc_read(rxd, 2, &rxdesc->iv); + _rt2x00_desc_read(rxd, 3, &rxdesc->eiv); + _rt2x00_desc_read(rxd, 4, &rxdesc->icv); + + /* + * Hardware has stripped IV/EIV data from 802.11 frame during + * decryption. It has provided the data seperately but rt2x00lib + * should decide if it should be reinserted. + */ + rxdesc->flags |= RX_FLAG_IV_STRIPPED; + + /* + * FIXME: Legacy driver indicates that the frame does + * contain the Michael Mic. Unfortunately, in rt2x00 + * the MIC seems to be missing completely... + */ + rxdesc->flags |= RX_FLAG_MMIC_STRIPPED; + + if (rxdesc->cipher_status == RX_CRYPTO_SUCCESS) + rxdesc->flags |= RX_FLAG_DECRYPTED; + else if (rxdesc->cipher_status == RX_CRYPTO_FAIL_MIC) + rxdesc->flags |= RX_FLAG_MMIC_ERROR; + } + /* * Obtain the status about this packet. * When frame was received with an OFDM bitrate, @@ -1496,11 +1760,13 @@ static void rt73usb_fill_rxdone(struct queue_entry *entry, * a CCK bitrate the signal is the rate in 100kbit/s. */ rxdesc->signal = rt2x00_get_field32(word1, RXD_W1_SIGNAL); - rxdesc->rssi = rt73usb_agc_to_rssi(entry->queue->rt2x00dev, word1); + rxdesc->rssi = rt73usb_agc_to_rssi(rt2x00dev, word1); rxdesc->size = rt2x00_get_field32(word0, RXD_W0_DATABYTE_COUNT); if (rt2x00_get_field32(word0, RXD_W0_OFDM)) rxdesc->dev_flags |= RXDONE_SIGNAL_PLCP; + else + rxdesc->dev_flags |= RXDONE_SIGNAL_BITRATE; if (rt2x00_get_field32(word0, RXD_W0_MY_BSS)) rxdesc->dev_flags |= RXDONE_MY_BSS; @@ -1852,10 +2118,11 @@ static const struct rf_channel rf_vals_5225_2527[] = { }; -static void rt73usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev) +static int rt73usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev) { struct hw_mode_spec *spec = &rt2x00dev->spec; - u8 *txpower; + struct channel_info *info; + char *tx_power; unsigned int i; /* @@ -1872,20 +2139,10 @@ static void rt73usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev) EEPROM_MAC_ADDR_0)); /* - * Convert tx_power array in eeprom. - */ - txpower = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_G_START); - for (i = 0; i < 14; i++) - txpower[i] = TXPOWER_FROM_DEV(txpower[i]); - - /* * Initialize hw_mode information. */ spec->supported_bands = SUPPORT_BAND_2GHZ; spec->supported_rates = SUPPORT_RATE_CCK | SUPPORT_RATE_OFDM; - spec->tx_power_a = NULL; - spec->tx_power_bg = txpower; - spec->tx_power_default = DEFAULT_TXPOWER; if (rt2x00_rf(&rt2x00dev->chip, RF2528)) { spec->num_channels = ARRAY_SIZE(rf_vals_bg_2528); @@ -1903,14 +2160,26 @@ static void rt73usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev) spec->channels = rf_vals_5225_2527; } - if (rt2x00_rf(&rt2x00dev->chip, RF5225) || - rt2x00_rf(&rt2x00dev->chip, RF5226)) { - txpower = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_A_START); - for (i = 0; i < 14; i++) - txpower[i] = TXPOWER_FROM_DEV(txpower[i]); + /* + * Create channel information array + */ + info = kzalloc(spec->num_channels * sizeof(*info), GFP_KERNEL); + if (!info) + return -ENOMEM; - spec->tx_power_a = txpower; + spec->channels_info = info; + + tx_power = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_G_START); + for (i = 0; i < 14; i++) + info[i].tx_power1 = TXPOWER_FROM_DEV(tx_power[i]); + + if (spec->num_channels > 14) { + tx_power = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_A_START); + for (i = 14; i < spec->num_channels; i++) + info[i].tx_power1 = TXPOWER_FROM_DEV(tx_power[i]); } + + return 0; } static int rt73usb_probe_hw(struct rt2x00_dev *rt2x00dev) @@ -1931,13 +2200,17 @@ static int rt73usb_probe_hw(struct rt2x00_dev *rt2x00dev) /* * Initialize hw specifications. */ - rt73usb_probe_hw_mode(rt2x00dev); + retval = rt73usb_probe_hw_mode(rt2x00dev); + if (retval) + return retval; /* * This device requires firmware. */ __set_bit(DRIVER_REQUIRE_FIRMWARE, &rt2x00dev->flags); __set_bit(DRIVER_REQUIRE_SCHEDULED, &rt2x00dev->flags); + if (!modparam_nohwcrypt) + __set_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags); /* * Set the rssi offset. @@ -1964,6 +2237,63 @@ static int rt73usb_set_retry_limit(struct ieee80211_hw *hw, return 0; } +static int rt73usb_conf_tx(struct ieee80211_hw *hw, u16 queue_idx, + const struct ieee80211_tx_queue_params *params) +{ + struct rt2x00_dev *rt2x00dev = hw->priv; + struct data_queue *queue; + struct rt2x00_field32 field; + int retval; + u32 reg; + + /* + * First pass the configuration through rt2x00lib, that will + * update the queue settings and validate the input. After that + * we are free to update the registers based on the value + * in the queue parameter. + */ + retval = rt2x00mac_conf_tx(hw, queue_idx, params); + if (retval) + return retval; + + queue = rt2x00queue_get_queue(rt2x00dev, queue_idx); + + /* Update WMM TXOP register */ + if (queue_idx < 2) { + field.bit_offset = queue_idx * 16; + field.bit_mask = 0xffff << field.bit_offset; + + rt73usb_register_read(rt2x00dev, AC_TXOP_CSR0, ®); + rt2x00_set_field32(®, field, queue->txop); + rt73usb_register_write(rt2x00dev, AC_TXOP_CSR0, reg); + } else if (queue_idx < 4) { + field.bit_offset = (queue_idx - 2) * 16; + field.bit_mask = 0xffff << field.bit_offset; + + rt73usb_register_read(rt2x00dev, AC_TXOP_CSR1, ®); + rt2x00_set_field32(®, field, queue->txop); + rt73usb_register_write(rt2x00dev, AC_TXOP_CSR1, reg); + } + + /* Update WMM registers */ + field.bit_offset = queue_idx * 4; + field.bit_mask = 0xf << field.bit_offset; + + rt73usb_register_read(rt2x00dev, AIFSN_CSR, ®); + rt2x00_set_field32(®, field, queue->aifs); + rt73usb_register_write(rt2x00dev, AIFSN_CSR, reg); + + rt73usb_register_read(rt2x00dev, CWMIN_CSR, ®); + rt2x00_set_field32(®, field, queue->cw_min); + rt73usb_register_write(rt2x00dev, CWMIN_CSR, reg); + + rt73usb_register_read(rt2x00dev, CWMAX_CSR, ®); + rt2x00_set_field32(®, field, queue->cw_max); + rt73usb_register_write(rt2x00dev, CWMAX_CSR, reg); + + return 0; +} + #if 0 /* * Mac80211 demands get_tsf must be atomic. @@ -1997,10 +2327,11 @@ static const struct ieee80211_ops rt73usb_mac80211_ops = { .config = rt2x00mac_config, .config_interface = rt2x00mac_config_interface, .configure_filter = rt2x00mac_configure_filter, + .set_key = rt2x00mac_set_key, .get_stats = rt2x00mac_get_stats, .set_retry_limit = rt73usb_set_retry_limit, .bss_info_changed = rt2x00mac_bss_info_changed, - .conf_tx = rt2x00mac_conf_tx, + .conf_tx = rt73usb_conf_tx, .get_tx_stats = rt2x00mac_get_tx_stats, .get_tsf = rt73usb_get_tsf, }; @@ -2024,6 +2355,8 @@ static const struct rt2x00lib_ops rt73usb_rt2x00_ops = { .get_tx_data_len = rt73usb_get_tx_data_len, .kick_tx_queue = rt73usb_kick_tx_queue, .fill_rxdone = rt73usb_fill_rxdone, + .config_shared_key = rt73usb_config_shared_key, + .config_pairwise_key = rt73usb_config_pairwise_key, .config_filter = rt73usb_config_filter, .config_intf = rt73usb_config_intf, .config_erp = rt73usb_config_erp, diff --git a/drivers/net/wireless/rt2x00/rt73usb.h b/drivers/net/wireless/rt2x00/rt73usb.h index 14849350101..868386c457f 100644 --- a/drivers/net/wireless/rt2x00/rt73usb.h +++ b/drivers/net/wireless/rt2x00/rt73usb.h @@ -92,6 +92,16 @@ #define PAIRWISE_KEY_TABLE_BASE 0x1200 #define PAIRWISE_TA_TABLE_BASE 0x1a00 +#define SHARED_KEY_ENTRY(__idx) \ + ( SHARED_KEY_TABLE_BASE + \ + ((__idx) * sizeof(struct hw_key_entry)) ) +#define PAIRWISE_KEY_ENTRY(__idx) \ + ( PAIRWISE_KEY_TABLE_BASE + \ + ((__idx) * sizeof(struct hw_key_entry)) ) +#define PAIRWISE_TA_ENTRY(__idx) \ + ( PAIRWISE_TA_TABLE_BASE + \ + ((__idx) * sizeof(struct hw_pairwise_ta_entry)) ) + struct hw_key_entry { u8 key[16]; u8 tx_mic[8]; @@ -100,7 +110,8 @@ struct hw_key_entry { struct hw_pairwise_ta_entry { u8 address[6]; - u8 reserved[2]; + u8 cipher; + u8 reserved; } __attribute__ ((packed)); /* @@ -563,6 +574,10 @@ struct hw_pairwise_ta_entry { * SEC_CSR4: Pairwise key table lookup control. */ #define SEC_CSR4 0x30b0 +#define SEC_CSR4_ENABLE_BSS0 FIELD32(0x00000001) +#define SEC_CSR4_ENABLE_BSS1 FIELD32(0x00000002) +#define SEC_CSR4_ENABLE_BSS2 FIELD32(0x00000004) +#define SEC_CSR4_ENABLE_BSS3 FIELD32(0x00000008) /* * SEC_CSR5: shared key table security mode register. @@ -1010,8 +1025,10 @@ struct hw_pairwise_ta_entry { /* * Word4 + * ICV: Received ICV of originally encrypted. + * NOTE: This is a guess, the official definition is "reserved" */ -#define RXD_W4_RESERVED FIELD32(0xffffffff) +#define RXD_W4_ICV FIELD32(0xffffffff) /* * the above 20-byte is called RXINFO and will be DMAed to MAC RX block @@ -1033,17 +1050,10 @@ struct hw_pairwise_ta_entry { #define MAX_TXPOWER 31 #define DEFAULT_TXPOWER 24 -#define TXPOWER_FROM_DEV(__txpower) \ -({ \ - ((__txpower) > MAX_TXPOWER) ? \ - DEFAULT_TXPOWER : (__txpower); \ -}) - -#define TXPOWER_TO_DEV(__txpower) \ -({ \ - ((__txpower) <= MIN_TXPOWER) ? MIN_TXPOWER : \ - (((__txpower) >= MAX_TXPOWER) ? MAX_TXPOWER : \ - (__txpower)); \ -}) +#define TXPOWER_FROM_DEV(__txpower) \ + (((u8)(__txpower)) > MAX_TXPOWER) ? DEFAULT_TXPOWER : (__txpower) + +#define TXPOWER_TO_DEV(__txpower) \ + clamp_t(char, __txpower, MIN_TXPOWER, MAX_TXPOWER) #endif /* RT73USB_H */ diff --git a/drivers/net/wireless/rtl8180.h b/drivers/net/wireless/rtl8180.h index 082a11f93be..8721282a818 100644 --- a/drivers/net/wireless/rtl8180.h +++ b/drivers/net/wireless/rtl8180.h @@ -24,20 +24,6 @@ #define ANAPARAM_PWR1_SHIFT 20 #define ANAPARAM_PWR1_MASK (0x7F << ANAPARAM_PWR1_SHIFT) -enum rtl8180_tx_desc_flags { - RTL8180_TX_DESC_FLAG_NO_ENC = (1 << 15), - RTL8180_TX_DESC_FLAG_TX_OK = (1 << 15), - RTL8180_TX_DESC_FLAG_SPLCP = (1 << 16), - RTL8180_TX_DESC_FLAG_RX_UNDER = (1 << 16), - RTL8180_TX_DESC_FLAG_MOREFRAG = (1 << 17), - RTL8180_TX_DESC_FLAG_CTS = (1 << 18), - RTL8180_TX_DESC_FLAG_RTS = (1 << 23), - RTL8180_TX_DESC_FLAG_LS = (1 << 28), - RTL8180_TX_DESC_FLAG_FS = (1 << 29), - RTL8180_TX_DESC_FLAG_DMA = (1 << 30), - RTL8180_TX_DESC_FLAG_OWN = (1 << 31) -}; - struct rtl8180_tx_desc { __le32 flags; __le16 rts_duration; @@ -52,23 +38,6 @@ struct rtl8180_tx_desc { u32 reserved[2]; } __attribute__ ((packed)); -enum rtl8180_rx_desc_flags { - RTL8180_RX_DESC_FLAG_ICV_ERR = (1 << 12), - RTL8180_RX_DESC_FLAG_CRC32_ERR = (1 << 13), - RTL8180_RX_DESC_FLAG_PM = (1 << 14), - RTL8180_RX_DESC_FLAG_RX_ERR = (1 << 15), - RTL8180_RX_DESC_FLAG_BCAST = (1 << 16), - RTL8180_RX_DESC_FLAG_PAM = (1 << 17), - RTL8180_RX_DESC_FLAG_MCAST = (1 << 18), - RTL8180_RX_DESC_FLAG_SPLCP = (1 << 25), - RTL8180_RX_DESC_FLAG_FOF = (1 << 26), - RTL8180_RX_DESC_FLAG_DMA_FAIL = (1 << 27), - RTL8180_RX_DESC_FLAG_LS = (1 << 28), - RTL8180_RX_DESC_FLAG_FS = (1 << 29), - RTL8180_RX_DESC_FLAG_EOR = (1 << 30), - RTL8180_RX_DESC_FLAG_OWN = (1 << 31) -}; - struct rtl8180_rx_desc { __le32 flags; __le32 flags2; diff --git a/drivers/net/wireless/rtl8180_dev.c b/drivers/net/wireless/rtl8180_dev.c index b7172a12c05..861c76a65d6 100644 --- a/drivers/net/wireless/rtl8180_dev.c +++ b/drivers/net/wireless/rtl8180_dev.c @@ -110,12 +110,12 @@ static void rtl8180_handle_rx(struct ieee80211_hw *dev) struct sk_buff *skb = priv->rx_buf[priv->rx_idx]; u32 flags = le32_to_cpu(entry->flags); - if (flags & RTL8180_RX_DESC_FLAG_OWN) + if (flags & RTL818X_RX_DESC_FLAG_OWN) return; - if (unlikely(flags & (RTL8180_RX_DESC_FLAG_DMA_FAIL | - RTL8180_RX_DESC_FLAG_FOF | - RTL8180_RX_DESC_FLAG_RX_ERR))) + if (unlikely(flags & (RTL818X_RX_DESC_FLAG_DMA_FAIL | + RTL818X_RX_DESC_FLAG_FOF | + RTL818X_RX_DESC_FLAG_RX_ERR))) goto done; else { u32 flags2 = le32_to_cpu(entry->flags2); @@ -140,7 +140,7 @@ static void rtl8180_handle_rx(struct ieee80211_hw *dev) rx_status.band = dev->conf.channel->band; rx_status.mactime = le64_to_cpu(entry->tsft); rx_status.flag |= RX_FLAG_TSFT; - if (flags & RTL8180_RX_DESC_FLAG_CRC32_ERR) + if (flags & RTL818X_RX_DESC_FLAG_CRC32_ERR) rx_status.flag |= RX_FLAG_FAILED_FCS_CRC; ieee80211_rx_irqsafe(dev, skb, &rx_status); @@ -154,10 +154,10 @@ static void rtl8180_handle_rx(struct ieee80211_hw *dev) done: entry->rx_buf = cpu_to_le32(*((dma_addr_t *)skb->cb)); - entry->flags = cpu_to_le32(RTL8180_RX_DESC_FLAG_OWN | + entry->flags = cpu_to_le32(RTL818X_RX_DESC_FLAG_OWN | MAX_RX_SIZE); if (priv->rx_idx == 31) - entry->flags |= cpu_to_le32(RTL8180_RX_DESC_FLAG_EOR); + entry->flags |= cpu_to_le32(RTL818X_RX_DESC_FLAG_EOR); priv->rx_idx = (priv->rx_idx + 1) % 32; } } @@ -173,7 +173,7 @@ static void rtl8180_handle_tx(struct ieee80211_hw *dev, unsigned int prio) struct ieee80211_tx_info *info; u32 flags = le32_to_cpu(entry->flags); - if (flags & RTL8180_TX_DESC_FLAG_OWN) + if (flags & RTL818X_TX_DESC_FLAG_OWN) return; ring->idx = (ring->idx + 1) % ring->entries; @@ -185,7 +185,7 @@ static void rtl8180_handle_tx(struct ieee80211_hw *dev, unsigned int prio) memset(&info->status, 0, sizeof(info->status)); if (!(info->flags & IEEE80211_TX_CTL_NO_ACK)) { - if (flags & RTL8180_TX_DESC_FLAG_TX_OK) + if (flags & RTL818X_TX_DESC_FLAG_TX_OK) info->flags |= IEEE80211_TX_STAT_ACK; else info->status.excessive_retries = 1; @@ -252,20 +252,20 @@ static int rtl8180_tx(struct ieee80211_hw *dev, struct sk_buff *skb) mapping = pci_map_single(priv->pdev, skb->data, skb->len, PCI_DMA_TODEVICE); - tx_flags = RTL8180_TX_DESC_FLAG_OWN | RTL8180_TX_DESC_FLAG_FS | - RTL8180_TX_DESC_FLAG_LS | + tx_flags = RTL818X_TX_DESC_FLAG_OWN | RTL818X_TX_DESC_FLAG_FS | + RTL818X_TX_DESC_FLAG_LS | (ieee80211_get_tx_rate(dev, info)->hw_value << 24) | skb->len; if (priv->r8185) - tx_flags |= RTL8180_TX_DESC_FLAG_DMA | - RTL8180_TX_DESC_FLAG_NO_ENC; + tx_flags |= RTL818X_TX_DESC_FLAG_DMA | + RTL818X_TX_DESC_FLAG_NO_ENC; if (info->flags & IEEE80211_TX_CTL_USE_RTS_CTS) { - tx_flags |= RTL8180_TX_DESC_FLAG_RTS; + tx_flags |= RTL818X_TX_DESC_FLAG_RTS; tx_flags |= ieee80211_get_rts_cts_rate(dev, info)->hw_value << 19; } else if (info->flags & IEEE80211_TX_CTL_USE_CTS_PROTECT) { - tx_flags |= RTL8180_TX_DESC_FLAG_CTS; + tx_flags |= RTL818X_TX_DESC_FLAG_CTS; tx_flags |= ieee80211_get_rts_cts_rate(dev, info)->hw_value << 19; } @@ -446,10 +446,10 @@ static int rtl8180_init_rx_ring(struct ieee80211_hw *dev) *mapping = pci_map_single(priv->pdev, skb_tail_pointer(skb), MAX_RX_SIZE, PCI_DMA_FROMDEVICE); entry->rx_buf = cpu_to_le32(*mapping); - entry->flags = cpu_to_le32(RTL8180_RX_DESC_FLAG_OWN | + entry->flags = cpu_to_le32(RTL818X_RX_DESC_FLAG_OWN | MAX_RX_SIZE); } - entry->flags |= cpu_to_le32(RTL8180_RX_DESC_FLAG_EOR); + entry->flags |= cpu_to_le32(RTL818X_RX_DESC_FLAG_EOR); return 0; } diff --git a/drivers/net/wireless/rtl8187.h b/drivers/net/wireless/rtl8187.h index 5a9515c9996..e82bb4d289e 100644 --- a/drivers/net/wireless/rtl8187.h +++ b/drivers/net/wireless/rtl8187.h @@ -58,12 +58,6 @@ struct rtl8187b_rx_hdr { /* {rtl8187,rtl8187b}_tx_info is in skb */ -/* Tx flags are common between rtl8187 and rtl8187b */ -#define RTL8187_TX_FLAG_NO_ENCRYPT (1 << 15) -#define RTL8187_TX_FLAG_MORE_FRAG (1 << 17) -#define RTL8187_TX_FLAG_CTS (1 << 18) -#define RTL8187_TX_FLAG_RTS (1 << 23) - struct rtl8187_tx_hdr { __le32 flags; __le16 rts_duration; diff --git a/drivers/net/wireless/rtl8187_dev.c b/drivers/net/wireless/rtl8187_dev.c index ca5deb6244e..8a42bfa6d4f 100644 --- a/drivers/net/wireless/rtl8187_dev.c +++ b/drivers/net/wireless/rtl8187_dev.c @@ -187,18 +187,18 @@ static int rtl8187_tx(struct ieee80211_hw *dev, struct sk_buff *skb) } flags = skb->len; - flags |= RTL8187_TX_FLAG_NO_ENCRYPT; + flags |= RTL818X_TX_DESC_FLAG_NO_ENC; flags |= ieee80211_get_tx_rate(dev, info)->hw_value << 24; if (ieee80211_has_morefrags(((struct ieee80211_hdr *)skb->data)->frame_control)) - flags |= RTL8187_TX_FLAG_MORE_FRAG; + flags |= RTL818X_TX_DESC_FLAG_MOREFRAG; if (info->flags & IEEE80211_TX_CTL_USE_RTS_CTS) { - flags |= RTL8187_TX_FLAG_RTS; + flags |= RTL818X_TX_DESC_FLAG_RTS; flags |= ieee80211_get_rts_cts_rate(dev, info)->hw_value << 19; rts_dur = ieee80211_rts_duration(dev, priv->vif, skb->len, info); } else if (info->flags & IEEE80211_TX_CTL_USE_CTS_PROTECT) { - flags |= RTL8187_TX_FLAG_CTS; + flags |= RTL818X_TX_DESC_FLAG_CTS; flags |= ieee80211_get_rts_cts_rate(dev, info)->hw_value << 19; } @@ -354,7 +354,7 @@ static void rtl8187_rx_cb(struct urb *urb) rx_status.freq = dev->conf.channel->center_freq; rx_status.band = dev->conf.channel->band; rx_status.flag |= RX_FLAG_TSFT; - if (flags & (1 << 13)) + if (flags & RTL818X_RX_DESC_FLAG_CRC32_ERR) rx_status.flag |= RX_FLAG_FAILED_FCS_CRC; ieee80211_rx_irqsafe(dev, skb, &rx_status); @@ -1184,6 +1184,8 @@ static int __devinit rtl8187_probe(struct usb_interface *intf, dev->max_signal = 65; } + dev->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION); + if ((id->driver_info == DEVICE_RTL8187) && priv->is_rtl8187b) printk(KERN_INFO "rtl8187: inconsistency between id with OEM" " info!\n"); diff --git a/drivers/net/wireless/rtl818x.h b/drivers/net/wireless/rtl818x.h index 00900fe16fc..3538b15211b 100644 --- a/drivers/net/wireless/rtl818x.h +++ b/drivers/net/wireless/rtl818x.h @@ -193,4 +193,39 @@ struct rtl818x_rf_ops { void (*set_chan)(struct ieee80211_hw *, struct ieee80211_conf *); }; +/* Tx/Rx flags are common between RTL818X chips */ + +enum rtl818x_tx_desc_flags { + RTL818X_TX_DESC_FLAG_NO_ENC = (1 << 15), + RTL818X_TX_DESC_FLAG_TX_OK = (1 << 15), + RTL818X_TX_DESC_FLAG_SPLCP = (1 << 16), + RTL818X_TX_DESC_FLAG_RX_UNDER = (1 << 16), + RTL818X_TX_DESC_FLAG_MOREFRAG = (1 << 17), + RTL818X_TX_DESC_FLAG_CTS = (1 << 18), + RTL818X_TX_DESC_FLAG_RTS = (1 << 23), + RTL818X_TX_DESC_FLAG_LS = (1 << 28), + RTL818X_TX_DESC_FLAG_FS = (1 << 29), + RTL818X_TX_DESC_FLAG_DMA = (1 << 30), + RTL818X_TX_DESC_FLAG_OWN = (1 << 31) +}; + +enum rtl818x_rx_desc_flags { + RTL818X_RX_DESC_FLAG_ICV_ERR = (1 << 12), + RTL818X_RX_DESC_FLAG_CRC32_ERR = (1 << 13), + RTL818X_RX_DESC_FLAG_PM = (1 << 14), + RTL818X_RX_DESC_FLAG_RX_ERR = (1 << 15), + RTL818X_RX_DESC_FLAG_BCAST = (1 << 16), + RTL818X_RX_DESC_FLAG_PAM = (1 << 17), + RTL818X_RX_DESC_FLAG_MCAST = (1 << 18), + RTL818X_RX_DESC_FLAG_QOS = (1 << 19), /* RTL8187(B) only */ + RTL818X_RX_DESC_FLAG_TRSW = (1 << 24), /* RTL8187(B) only */ + RTL818X_RX_DESC_FLAG_SPLCP = (1 << 25), + RTL818X_RX_DESC_FLAG_FOF = (1 << 26), + RTL818X_RX_DESC_FLAG_DMA_FAIL = (1 << 27), + RTL818X_RX_DESC_FLAG_LS = (1 << 28), + RTL818X_RX_DESC_FLAG_FS = (1 << 29), + RTL818X_RX_DESC_FLAG_EOR = (1 << 30), + RTL818X_RX_DESC_FLAG_OWN = (1 << 31) +}; + #endif /* RTL818X_H */ diff --git a/drivers/net/wireless/spectrum_cs.c b/drivers/net/wireless/spectrum_cs.c index 98df9bc7836..e368759d1d8 100644 --- a/drivers/net/wireless/spectrum_cs.c +++ b/drivers/net/wireless/spectrum_cs.c @@ -25,7 +25,6 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/delay.h> -#include <linux/firmware.h> #include <pcmcia/cs_types.h> #include <pcmcia/cs.h> #include <pcmcia/cistpl.h> @@ -34,9 +33,6 @@ #include "orinoco.h" -static const char primary_fw_name[] = "symbol_sp24t_prim_fw"; -static const char secondary_fw_name[] = "symbol_sp24t_sec_fw"; - /********************************************************************/ /* Module stuff */ /********************************************************************/ @@ -71,161 +67,11 @@ struct orinoco_pccard { static int spectrum_cs_config(struct pcmcia_device *link); static void spectrum_cs_release(struct pcmcia_device *link); -/********************************************************************/ -/* Firmware downloader */ -/********************************************************************/ - -/* Position of PDA in the adapter memory */ -#define EEPROM_ADDR 0x3000 -#define EEPROM_LEN 0x200 -#define PDA_OFFSET 0x100 - -#define PDA_ADDR (EEPROM_ADDR + PDA_OFFSET) -#define PDA_WORDS ((EEPROM_LEN - PDA_OFFSET) / 2) - /* Constants for the CISREG_CCSR register */ #define HCR_RUN 0x07 /* run firmware after reset */ #define HCR_IDLE 0x0E /* don't run firmware after reset */ #define HCR_MEM16 0x10 /* memory width bit, should be preserved */ -/* - * AUX port access. To unlock the AUX port write the access keys to the - * PARAM0-2 registers, then write HERMES_AUX_ENABLE to the HERMES_CONTROL - * register. Then read it and make sure it's HERMES_AUX_ENABLED. - */ -#define HERMES_AUX_ENABLE 0x8000 /* Enable auxiliary port access */ -#define HERMES_AUX_DISABLE 0x4000 /* Disable to auxiliary port access */ -#define HERMES_AUX_ENABLED 0xC000 /* Auxiliary port is open */ - -#define HERMES_AUX_PW0 0xFE01 -#define HERMES_AUX_PW1 0xDC23 -#define HERMES_AUX_PW2 0xBA45 - -/* End markers */ -#define PDI_END 0x00000000 /* End of PDA */ -#define BLOCK_END 0xFFFFFFFF /* Last image block */ -#define TEXT_END 0x1A /* End of text header */ - -/* - * The following structures have little-endian fields denoted by - * the leading underscore. Don't access them directly - use inline - * functions defined below. - */ - -/* - * The binary image to be downloaded consists of series of data blocks. - * Each block has the following structure. - */ -struct dblock { - __le32 addr; /* adapter address where to write the block */ - __le16 len; /* length of the data only, in bytes */ - char data[0]; /* data to be written */ -} __attribute__ ((packed)); - -/* - * Plug Data References are located in in the image after the last data - * block. They refer to areas in the adapter memory where the plug data - * items with matching ID should be written. - */ -struct pdr { - __le32 id; /* record ID */ - __le32 addr; /* adapter address where to write the data */ - __le32 len; /* expected length of the data, in bytes */ - char next[0]; /* next PDR starts here */ -} __attribute__ ((packed)); - - -/* - * Plug Data Items are located in the EEPROM read from the adapter by - * primary firmware. They refer to the device-specific data that should - * be plugged into the secondary firmware. - */ -struct pdi { - __le16 len; /* length of ID and data, in words */ - __le16 id; /* record ID */ - char data[0]; /* plug data */ -} __attribute__ ((packed)); - - -/* Functions for access to little-endian data */ -static inline u32 -dblock_addr(const struct dblock *blk) -{ - return le32_to_cpu(blk->addr); -} - -static inline u32 -dblock_len(const struct dblock *blk) -{ - return le16_to_cpu(blk->len); -} - -static inline u32 -pdr_id(const struct pdr *pdr) -{ - return le32_to_cpu(pdr->id); -} - -static inline u32 -pdr_addr(const struct pdr *pdr) -{ - return le32_to_cpu(pdr->addr); -} - -static inline u32 -pdr_len(const struct pdr *pdr) -{ - return le32_to_cpu(pdr->len); -} - -static inline u32 -pdi_id(const struct pdi *pdi) -{ - return le16_to_cpu(pdi->id); -} - -/* Return length of the data only, in bytes */ -static inline u32 -pdi_len(const struct pdi *pdi) -{ - return 2 * (le16_to_cpu(pdi->len) - 1); -} - - -/* Set address of the auxiliary port */ -static inline void -spectrum_aux_setaddr(hermes_t *hw, u32 addr) -{ - hermes_write_reg(hw, HERMES_AUXPAGE, (u16) (addr >> 7)); - hermes_write_reg(hw, HERMES_AUXOFFSET, (u16) (addr & 0x7F)); -} - - -/* Open access to the auxiliary port */ -static int -spectrum_aux_open(hermes_t *hw) -{ - int i; - - /* Already open? */ - if (hermes_read_reg(hw, HERMES_CONTROL) == HERMES_AUX_ENABLED) - return 0; - - hermes_write_reg(hw, HERMES_PARAM0, HERMES_AUX_PW0); - hermes_write_reg(hw, HERMES_PARAM1, HERMES_AUX_PW1); - hermes_write_reg(hw, HERMES_PARAM2, HERMES_AUX_PW2); - hermes_write_reg(hw, HERMES_CONTROL, HERMES_AUX_ENABLE); - - for (i = 0; i < 20; i++) { - udelay(10); - if (hermes_read_reg(hw, HERMES_CONTROL) == - HERMES_AUX_ENABLED) - return 0; - } - - return -EBUSY; -} - #define CS_CHECK(fn, ret) \ do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0) @@ -292,275 +138,29 @@ spectrum_reset(struct pcmcia_device *link, int idle) return -ENODEV; } +/********************************************************************/ +/* Device methods */ +/********************************************************************/ -/* - * Scan PDR for the record with the specified RECORD_ID. - * If it's not found, return NULL. - */ -static struct pdr * -spectrum_find_pdr(struct pdr *first_pdr, u32 record_id) -{ - struct pdr *pdr = first_pdr; - - while (pdr_id(pdr) != PDI_END) { - /* - * PDR area is currently not terminated by PDI_END. - * It's followed by CRC records, which have the type - * field where PDR has length. The type can be 0 or 1. - */ - if (pdr_len(pdr) < 2) - return NULL; - - /* If the record ID matches, we are done */ - if (pdr_id(pdr) == record_id) - return pdr; - - pdr = (struct pdr *) pdr->next; - } - return NULL; -} - - -/* Process one Plug Data Item - find corresponding PDR and plug it */ -static int -spectrum_plug_pdi(hermes_t *hw, struct pdr *first_pdr, struct pdi *pdi) -{ - struct pdr *pdr; - - /* Find the PDI corresponding to this PDR */ - pdr = spectrum_find_pdr(first_pdr, pdi_id(pdi)); - - /* No match is found, safe to ignore */ - if (!pdr) - return 0; - - /* Lengths of the data in PDI and PDR must match */ - if (pdi_len(pdi) != pdr_len(pdr)) - return -EINVAL; - - /* do the actual plugging */ - spectrum_aux_setaddr(hw, pdr_addr(pdr)); - hermes_write_bytes(hw, HERMES_AUXDATA, pdi->data, pdi_len(pdi)); - - return 0; -} - - -/* Read PDA from the adapter */ -static int -spectrum_read_pda(hermes_t *hw, __le16 *pda, int pda_len) -{ - int ret; - int pda_size; - - /* Issue command to read EEPROM */ - ret = hermes_docmd_wait(hw, HERMES_CMD_READMIF, 0, NULL); - if (ret) - return ret; - - /* Open auxiliary port */ - ret = spectrum_aux_open(hw); - if (ret) - return ret; - - /* read PDA from EEPROM */ - spectrum_aux_setaddr(hw, PDA_ADDR); - hermes_read_words(hw, HERMES_AUXDATA, pda, pda_len / 2); - - /* Check PDA length */ - pda_size = le16_to_cpu(pda[0]); - if (pda_size > pda_len) - return -EINVAL; - - return 0; -} - - -/* Parse PDA and write the records into the adapter */ -static int -spectrum_apply_pda(hermes_t *hw, const struct dblock *first_block, - __le16 *pda) -{ - int ret; - struct pdi *pdi; - struct pdr *first_pdr; - const struct dblock *blk = first_block; - - /* Skip all blocks to locate Plug Data References */ - while (dblock_addr(blk) != BLOCK_END) - blk = (struct dblock *) &blk->data[dblock_len(blk)]; - - first_pdr = (struct pdr *) blk; - - /* Go through every PDI and plug them into the adapter */ - pdi = (struct pdi *) (pda + 2); - while (pdi_id(pdi) != PDI_END) { - ret = spectrum_plug_pdi(hw, first_pdr, pdi); - if (ret) - return ret; - - /* Increment to the next PDI */ - pdi = (struct pdi *) &pdi->data[pdi_len(pdi)]; - } - return 0; -} - - -/* Load firmware blocks into the adapter */ -static int -spectrum_load_blocks(hermes_t *hw, const struct dblock *first_block) -{ - const struct dblock *blk; - u32 blkaddr; - u32 blklen; - - blk = first_block; - blkaddr = dblock_addr(blk); - blklen = dblock_len(blk); - - while (dblock_addr(blk) != BLOCK_END) { - spectrum_aux_setaddr(hw, blkaddr); - hermes_write_bytes(hw, HERMES_AUXDATA, blk->data, - blklen); - - blk = (struct dblock *) &blk->data[blklen]; - blkaddr = dblock_addr(blk); - blklen = dblock_len(blk); - } - return 0; -} - - -/* - * Process a firmware image - stop the card, load the firmware, reset - * the card and make sure it responds. For the secondary firmware take - * care of the PDA - read it and then write it on top of the firmware. - */ static int -spectrum_dl_image(hermes_t *hw, struct pcmcia_device *link, - const unsigned char *image, int secondary) +spectrum_cs_hard_reset(struct orinoco_private *priv) { - int ret; - const unsigned char *ptr; - const struct dblock *first_block; - - /* Plug Data Area (PDA) */ - __le16 pda[PDA_WORDS]; - - /* Binary block begins after the 0x1A marker */ - ptr = image; - while (*ptr++ != TEXT_END); - first_block = (const struct dblock *) ptr; - - /* Read the PDA */ - if (secondary) { - ret = spectrum_read_pda(hw, pda, sizeof(pda)); - if (ret) - return ret; - } - - /* Stop the firmware, so that it can be safely rewritten */ - ret = spectrum_reset(link, 1); - if (ret) - return ret; - - /* Program the adapter with new firmware */ - ret = spectrum_load_blocks(hw, first_block); - if (ret) - return ret; - - /* Write the PDA to the adapter */ - if (secondary) { - ret = spectrum_apply_pda(hw, first_block, pda); - if (ret) - return ret; - } - - /* Run the firmware */ - ret = spectrum_reset(link, 0); - if (ret) - return ret; - - /* Reset hermes chip and make sure it responds */ - ret = hermes_init(hw); - - /* hermes_reset() should return 0 with the secondary firmware */ - if (secondary && ret != 0) - return -ENODEV; + struct orinoco_pccard *card = priv->card; + struct pcmcia_device *link = card->p_dev; - /* And this should work with any firmware */ - if (!hermes_present(hw)) - return -ENODEV; + /* Soft reset using COR and HCR */ + spectrum_reset(link, 0); return 0; } - -/* - * Download the firmware into the card, this also does a PCMCIA soft - * reset on the card, to make sure it's in a sane state. - */ static int -spectrum_dl_firmware(hermes_t *hw, struct pcmcia_device *link) -{ - int ret; - const struct firmware *fw_entry; - - if (request_firmware(&fw_entry, primary_fw_name, - &handle_to_dev(link)) != 0) { - printk(KERN_ERR PFX "Cannot find firmware: %s\n", - primary_fw_name); - return -ENOENT; - } - - /* Load primary firmware */ - ret = spectrum_dl_image(hw, link, fw_entry->data, 0); - release_firmware(fw_entry); - if (ret) { - printk(KERN_ERR PFX "Primary firmware download failed\n"); - return ret; - } - - if (request_firmware(&fw_entry, secondary_fw_name, - &handle_to_dev(link)) != 0) { - printk(KERN_ERR PFX "Cannot find firmware: %s\n", - secondary_fw_name); - return -ENOENT; - } - - /* Load secondary firmware */ - ret = spectrum_dl_image(hw, link, fw_entry->data, 1); - release_firmware(fw_entry); - if (ret) { - printk(KERN_ERR PFX "Secondary firmware download failed\n"); - } - - return ret; -} - -/********************************************************************/ -/* Device methods */ -/********************************************************************/ - -static int -spectrum_cs_hard_reset(struct orinoco_private *priv) +spectrum_cs_stop_firmware(struct orinoco_private *priv, int idle) { struct orinoco_pccard *card = priv->card; struct pcmcia_device *link = card->p_dev; - int err; - if (!hermes_present(&priv->hw)) { - /* The firmware needs to be reloaded */ - if (spectrum_dl_firmware(&priv->hw, link) != 0) { - printk(KERN_ERR PFX "Firmware download failed\n"); - err = -ENODEV; - } - } else { - /* Soft reset using COR and HCR */ - spectrum_reset(link, 0); - } - - return 0; + return spectrum_reset(link, idle); } /********************************************************************/ @@ -582,7 +182,9 @@ spectrum_cs_probe(struct pcmcia_device *link) struct orinoco_private *priv; struct orinoco_pccard *card; - dev = alloc_orinocodev(sizeof(*card), spectrum_cs_hard_reset); + dev = alloc_orinocodev(sizeof(*card), &handle_to_dev(link), + spectrum_cs_hard_reset, + spectrum_cs_stop_firmware); if (! dev) return -ENOMEM; priv = netdev_priv(dev); @@ -784,7 +386,7 @@ spectrum_cs_config(struct pcmcia_device *link) dev->irq = link->irq.AssignedIRQ; card->node.major = card->node.minor = 0; - /* Reset card and download firmware */ + /* Reset card */ if (spectrum_cs_hard_reset(priv) != 0) { goto failed; } diff --git a/drivers/net/wireless/wl3501_cs.c b/drivers/net/wireless/wl3501_cs.c index 377141995e3..b6d4e04b8ab 100644 --- a/drivers/net/wireless/wl3501_cs.c +++ b/drivers/net/wireless/wl3501_cs.c @@ -79,7 +79,7 @@ static int pc_debug = PCMCIA_DEBUG; module_param(pc_debug, int, 0); #define dprintk(n, format, args...) \ { if (pc_debug > (n)) \ - printk(KERN_INFO "%s: " format "\n", __FUNCTION__ , ##args); } + printk(KERN_INFO "%s: " format "\n", __func__ , ##args); } #else #define dprintk(n, format, args...) #endif @@ -470,7 +470,7 @@ static int wl3501_pwr_mgmt(struct wl3501_card *this, int suspend) spin_unlock_irqrestore(&this->lock, flags); rc = wait_event_interruptible(this->wait, this->sig_pwr_mgmt_confirm.status != 255); - printk(KERN_INFO "%s: %s status=%d\n", __FUNCTION__, + printk(KERN_INFO "%s: %s status=%d\n", __func__, suspend ? "suspend" : "resume", this->sig_pwr_mgmt_confirm.status); goto out; @@ -1199,7 +1199,7 @@ static int wl3501_reset_board(struct wl3501_card *this) } WL3501_NOPLOOP(10); } - printk(KERN_WARNING "%s: failed to reset the board!\n", __FUNCTION__); + printk(KERN_WARNING "%s: failed to reset the board!\n", __func__); rc = -ENODEV; out: return rc; @@ -1250,7 +1250,7 @@ static int wl3501_init_firmware(struct wl3501_card *this) out: return rc; fail: - printk(KERN_WARNING "%s: failed!\n", __FUNCTION__); + printk(KERN_WARNING "%s: failed!\n", __func__); goto out; } diff --git a/drivers/net/wireless/zd1211rw/zd_mac.c b/drivers/net/wireless/zd1211rw/zd_mac.c index 4d7b98b0503..e019102b228 100644 --- a/drivers/net/wireless/zd1211rw/zd_mac.c +++ b/drivers/net/wireless/zd1211rw/zd_mac.c @@ -937,6 +937,11 @@ struct ieee80211_hw *zd_mac_alloc_hw(struct usb_interface *intf) hw->flags = IEEE80211_HW_RX_INCLUDES_FCS | IEEE80211_HW_SIGNAL_DB; + hw->wiphy->interface_modes = + BIT(NL80211_IFTYPE_MESH_POINT) | + BIT(NL80211_IFTYPE_STATION) | + BIT(NL80211_IFTYPE_ADHOC); + hw->max_signal = 100; hw->queues = 1; hw->extra_tx_headroom = sizeof(struct zd_ctrlset); diff --git a/drivers/ssb/pci.c b/drivers/ssb/pci.c index f883dcfffe0..d5cde051806 100644 --- a/drivers/ssb/pci.c +++ b/drivers/ssb/pci.c @@ -327,11 +327,9 @@ static void sprom_extract_r123(struct ssb_sprom *out, const u16 *in) s8 gain; u16 loc[3]; - if (out->revision == 3) { /* rev 3 moved MAC */ + if (out->revision == 3) /* rev 3 moved MAC */ loc[0] = SSB_SPROM3_IL0MAC; - loc[1] = SSB_SPROM3_ET0MAC; - loc[2] = SSB_SPROM3_ET1MAC; - } else { + else { loc[0] = SSB_SPROM1_IL0MAC; loc[1] = SSB_SPROM1_ET0MAC; loc[2] = SSB_SPROM1_ET1MAC; @@ -340,13 +338,15 @@ static void sprom_extract_r123(struct ssb_sprom *out, const u16 *in) v = in[SPOFF(loc[0]) + i]; *(((__be16 *)out->il0mac) + i) = cpu_to_be16(v); } - for (i = 0; i < 3; i++) { - v = in[SPOFF(loc[1]) + i]; - *(((__be16 *)out->et0mac) + i) = cpu_to_be16(v); - } - for (i = 0; i < 3; i++) { - v = in[SPOFF(loc[2]) + i]; - *(((__be16 *)out->et1mac) + i) = cpu_to_be16(v); + if (out->revision < 3) { /* only rev 1-2 have et0, et1 */ + for (i = 0; i < 3; i++) { + v = in[SPOFF(loc[1]) + i]; + *(((__be16 *)out->et0mac) + i) = cpu_to_be16(v); + } + for (i = 0; i < 3; i++) { + v = in[SPOFF(loc[2]) + i]; + *(((__be16 *)out->et1mac) + i) = cpu_to_be16(v); + } } SPEX(et0phyaddr, SSB_SPROM1_ETHPHY, SSB_SPROM1_ETHPHY_ET0A, 0); SPEX(et1phyaddr, SSB_SPROM1_ETHPHY, SSB_SPROM1_ETHPHY_ET1A, @@ -399,30 +399,33 @@ static void sprom_extract_r123(struct ssb_sprom *out, const u16 *in) out->antenna_gain.ghz5.a3 = gain; } -static void sprom_extract_r4(struct ssb_sprom *out, const u16 *in) +static void sprom_extract_r45(struct ssb_sprom *out, const u16 *in) { int i; u16 v; + u16 il0mac_offset; - /* extract the equivalent of the r1 variables */ + if (out->revision == 4) + il0mac_offset = SSB_SPROM4_IL0MAC; + else + il0mac_offset = SSB_SPROM5_IL0MAC; + /* extract the MAC address */ for (i = 0; i < 3; i++) { - v = in[SPOFF(SSB_SPROM4_IL0MAC) + i]; + v = in[SPOFF(il0mac_offset) + i]; *(((__be16 *)out->il0mac) + i) = cpu_to_be16(v); } - for (i = 0; i < 3; i++) { - v = in[SPOFF(SSB_SPROM4_ET0MAC) + i]; - *(((__be16 *)out->et0mac) + i) = cpu_to_be16(v); - } - for (i = 0; i < 3; i++) { - v = in[SPOFF(SSB_SPROM4_ET1MAC) + i]; - *(((__be16 *)out->et1mac) + i) = cpu_to_be16(v); - } SPEX(et0phyaddr, SSB_SPROM4_ETHPHY, SSB_SPROM4_ETHPHY_ET0A, 0); SPEX(et1phyaddr, SSB_SPROM4_ETHPHY, SSB_SPROM4_ETHPHY_ET1A, SSB_SPROM4_ETHPHY_ET1A_SHIFT); - SPEX(country_code, SSB_SPROM4_CCODE, 0xFFFF, 0); - SPEX(boardflags_lo, SSB_SPROM4_BFLLO, 0xFFFF, 0); - SPEX(boardflags_hi, SSB_SPROM4_BFLHI, 0xFFFF, 0); + if (out->revision == 4) { + SPEX(country_code, SSB_SPROM4_CCODE, 0xFFFF, 0); + SPEX(boardflags_lo, SSB_SPROM4_BFLLO, 0xFFFF, 0); + SPEX(boardflags_hi, SSB_SPROM4_BFLHI, 0xFFFF, 0); + } else { + SPEX(country_code, SSB_SPROM5_CCODE, 0xFFFF, 0); + SPEX(boardflags_lo, SSB_SPROM5_BFLLO, 0xFFFF, 0); + SPEX(boardflags_hi, SSB_SPROM5_BFLHI, 0xFFFF, 0); + } SPEX(ant_available_a, SSB_SPROM4_ANTAVAIL, SSB_SPROM4_ANTAVAIL_A, SSB_SPROM4_ANTAVAIL_A_SHIFT); SPEX(ant_available_bg, SSB_SPROM4_ANTAVAIL, SSB_SPROM4_ANTAVAIL_BG, @@ -433,12 +436,21 @@ static void sprom_extract_r4(struct ssb_sprom *out, const u16 *in) SPEX(maxpwr_a, SSB_SPROM4_MAXP_A, SSB_SPROM4_MAXP_A_MASK, 0); SPEX(itssi_a, SSB_SPROM4_MAXP_A, SSB_SPROM4_ITSSI_A, SSB_SPROM4_ITSSI_A_SHIFT); - SPEX(gpio0, SSB_SPROM4_GPIOA, SSB_SPROM4_GPIOA_P0, 0); - SPEX(gpio1, SSB_SPROM4_GPIOA, SSB_SPROM4_GPIOA_P1, - SSB_SPROM4_GPIOA_P1_SHIFT); - SPEX(gpio2, SSB_SPROM4_GPIOB, SSB_SPROM4_GPIOB_P2, 0); - SPEX(gpio3, SSB_SPROM4_GPIOB, SSB_SPROM4_GPIOB_P3, - SSB_SPROM4_GPIOB_P3_SHIFT); + if (out->revision == 4) { + SPEX(gpio0, SSB_SPROM4_GPIOA, SSB_SPROM4_GPIOA_P0, 0); + SPEX(gpio1, SSB_SPROM4_GPIOA, SSB_SPROM4_GPIOA_P1, + SSB_SPROM4_GPIOA_P1_SHIFT); + SPEX(gpio2, SSB_SPROM4_GPIOB, SSB_SPROM4_GPIOB_P2, 0); + SPEX(gpio3, SSB_SPROM4_GPIOB, SSB_SPROM4_GPIOB_P3, + SSB_SPROM4_GPIOB_P3_SHIFT); + } else { + SPEX(gpio0, SSB_SPROM5_GPIOA, SSB_SPROM5_GPIOA_P0, 0); + SPEX(gpio1, SSB_SPROM5_GPIOA, SSB_SPROM5_GPIOA_P1, + SSB_SPROM5_GPIOA_P1_SHIFT); + SPEX(gpio2, SSB_SPROM5_GPIOB, SSB_SPROM5_GPIOB_P2, 0); + SPEX(gpio3, SSB_SPROM5_GPIOB, SSB_SPROM5_GPIOB_P3, + SSB_SPROM5_GPIOB_P3_SHIFT); + } /* Extract the antenna gain values. */ SPEX(antenna_gain.ghz24.a0, SSB_SPROM4_AGAIN01, @@ -462,6 +474,8 @@ static int sprom_extract(struct ssb_bus *bus, struct ssb_sprom *out, out->revision = in[size - 1] & 0x00FF; ssb_dprintk(KERN_DEBUG PFX "SPROM revision %d detected.\n", out->revision); + memset(out->et0mac, 0xFF, 6); /* preset et0 and et1 mac */ + memset(out->et1mac, 0xFF, 6); if ((bus->chip_id & 0xFF00) == 0x4400) { /* Workaround: The BCM44XX chip has a stupid revision * number stored in the SPROM. @@ -471,16 +485,16 @@ static int sprom_extract(struct ssb_bus *bus, struct ssb_sprom *out, } else if (bus->chip_id == 0x4321) { /* the BCM4328 has a chipid == 0x4321 and a rev 4 SPROM */ out->revision = 4; - sprom_extract_r4(out, in); + sprom_extract_r45(out, in); } else { if (out->revision == 0) goto unsupported; if (out->revision >= 1 && out->revision <= 3) { sprom_extract_r123(out, in); } - if (out->revision == 4) - sprom_extract_r4(out, in); - if (out->revision >= 5) + if (out->revision == 4 || out->revision == 5) + sprom_extract_r45(out, in); + if (out->revision > 5) goto unsupported; } |