summaryrefslogtreecommitdiffstats
path: root/drivers
diff options
context:
space:
mode:
Diffstat (limited to 'drivers')
-rw-r--r--drivers/hwmon/Kconfig21
-rw-r--r--drivers/hwmon/Makefile2
-rw-r--r--drivers/hwmon/ad7314.c186
-rw-r--r--drivers/hwmon/exynos4_tmu.c524
-rw-r--r--drivers/hwmon/f71882fg.c231
-rw-r--r--drivers/hwmon/lm75.c39
-rw-r--r--drivers/hwmon/pmbus/Kconfig28
-rw-r--r--drivers/hwmon/pmbus/Makefile2
-rw-r--r--drivers/hwmon/pmbus/adm1275.c159
-rw-r--r--drivers/hwmon/pmbus/lm25066.c17
-rw-r--r--drivers/hwmon/pmbus/ltc2978.c408
-rw-r--r--drivers/hwmon/pmbus/max16064.c3
-rw-r--r--drivers/hwmon/pmbus/max34440.c13
-rw-r--r--drivers/hwmon/pmbus/max8688.c9
-rw-r--r--drivers/hwmon/pmbus/pmbus.c10
-rw-r--r--drivers/hwmon/pmbus/pmbus.h23
-rw-r--r--drivers/hwmon/pmbus/pmbus_core.c85
-rw-r--r--drivers/hwmon/pmbus/ucd9000.c13
-rw-r--r--drivers/hwmon/pmbus/ucd9200.c5
-rw-r--r--drivers/hwmon/pmbus/zl6100.c256
-rw-r--r--drivers/hwmon/w83627ehf.c238
21 files changed, 1983 insertions, 289 deletions
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 0b62c3c6b7c..9b347acf155 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -68,6 +68,16 @@ config SENSORS_ABITUGURU3
This driver can also be built as a module. If so, the module
will be called abituguru3.
+config SENSORS_AD7314
+ tristate "Analog Devices AD7314 and compatibles"
+ depends on SPI && EXPERIMENTAL
+ help
+ If you say yes here you get support for the Analog Devices
+ AD7314, ADT7301 and ADT7302 temperature sensors.
+
+ This driver can also be built as a module. If so, the module
+ will be called ad7314.
+
config SENSORS_AD7414
tristate "Analog Devices AD7414"
depends on I2C && EXPERIMENTAL
@@ -303,6 +313,16 @@ config SENSORS_DS1621
This driver can also be built as a module. If so, the module
will be called ds1621.
+config SENSORS_EXYNOS4_TMU
+ tristate "Temperature sensor on Samsung EXYNOS4"
+ depends on EXYNOS4_DEV_TMU
+ help
+ If you say yes here you get support for TMU (Thermal Managment
+ Unit) on SAMSUNG EXYNOS4 series of SoC.
+
+ This driver can also be built as a module. If so, the module
+ will be called exynos4-tmu.
+
config SENSORS_I5K_AMB
tristate "FB-DIMM AMB temperature sensor on Intel 5000 series chipsets"
depends on PCI && EXPERIMENTAL
@@ -531,6 +551,7 @@ config SENSORS_LM75
If you say yes here you get support for one common type of
temperature sensor chip, with models including:
+ - Analog Devices ADT75
- Dallas Semiconductor DS75 and DS1775
- Maxim MAX6625 and MAX6626
- Microchip MCP980x
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index 3c9ccefea79..8251ce8cd03 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -21,6 +21,7 @@ obj-$(CONFIG_SENSORS_W83791D) += w83791d.o
obj-$(CONFIG_SENSORS_ABITUGURU) += abituguru.o
obj-$(CONFIG_SENSORS_ABITUGURU3)+= abituguru3.o
+obj-$(CONFIG_SENSORS_AD7314) += ad7314.o
obj-$(CONFIG_SENSORS_AD7414) += ad7414.o
obj-$(CONFIG_SENSORS_AD7418) += ad7418.o
obj-$(CONFIG_SENSORS_ADCXX) += adcxx.o
@@ -47,6 +48,7 @@ obj-$(CONFIG_SENSORS_DS1621) += ds1621.o
obj-$(CONFIG_SENSORS_EMC1403) += emc1403.o
obj-$(CONFIG_SENSORS_EMC2103) += emc2103.o
obj-$(CONFIG_SENSORS_EMC6W201) += emc6w201.o
+obj-$(CONFIG_SENSORS_EXYNOS4_TMU) += exynos4_tmu.o
obj-$(CONFIG_SENSORS_F71805F) += f71805f.o
obj-$(CONFIG_SENSORS_F71882FG) += f71882fg.o
obj-$(CONFIG_SENSORS_F75375S) += f75375s.o
diff --git a/drivers/hwmon/ad7314.c b/drivers/hwmon/ad7314.c
new file mode 100644
index 00000000000..318e38e8537
--- /dev/null
+++ b/drivers/hwmon/ad7314.c
@@ -0,0 +1,186 @@
+/*
+ * AD7314 digital temperature sensor driver for AD7314, ADT7301 and ADT7302
+ *
+ * Copyright 2010 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ *
+ * Conversion to hwmon from IIO done by Jonathan Cameron <jic23@cam.ac.uk>
+ */
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/sysfs.h>
+#include <linux/spi/spi.h>
+#include <linux/module.h>
+#include <linux/err.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+
+/*
+ * AD7314 power mode
+ */
+#define AD7314_PD 0x2000
+
+/*
+ * AD7314 temperature masks
+ */
+#define AD7314_TEMP_SIGN 0x200
+#define AD7314_TEMP_MASK 0x7FE0
+#define AD7314_TEMP_OFFSET 5
+
+/*
+ * ADT7301 and ADT7302 temperature masks
+ */
+#define ADT7301_TEMP_SIGN 0x2000
+#define ADT7301_TEMP_MASK 0x3FFF
+
+enum ad7314_variant {
+ adt7301,
+ adt7302,
+ ad7314,
+};
+
+struct ad7314_data {
+ struct spi_device *spi_dev;
+ struct device *hwmon_dev;
+ u16 rx ____cacheline_aligned;
+};
+
+static int ad7314_spi_read(struct ad7314_data *chip, s16 *data)
+{
+ int ret;
+
+ ret = spi_read(chip->spi_dev, (u8 *)&chip->rx, sizeof(chip->rx));
+ if (ret < 0) {
+ dev_err(&chip->spi_dev->dev, "SPI read error\n");
+ return ret;
+ }
+
+ *data = be16_to_cpu(chip->rx);
+
+ return ret;
+}
+
+static ssize_t ad7314_show_temperature(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct ad7314_data *chip = dev_get_drvdata(dev);
+ s16 data;
+ int ret;
+
+ ret = ad7314_spi_read(chip, &data);
+ if (ret < 0)
+ return ret;
+ switch (spi_get_device_id(chip->spi_dev)->driver_data) {
+ case ad7314:
+ data = (data & AD7314_TEMP_MASK) >> AD7314_TEMP_OFFSET;
+ data = (data << 6) >> 6;
+
+ return sprintf(buf, "%d\n", 250 * data);
+ case adt7301:
+ case adt7302:
+ /*
+ * Documented as a 13 bit twos complement register
+ * with a sign bit - which is a 14 bit 2's complement
+ * register. 1lsb - 31.25 milli degrees centigrade
+ */
+ data &= ADT7301_TEMP_MASK;
+ data = (data << 2) >> 2;
+
+ return sprintf(buf, "%d\n",
+ DIV_ROUND_CLOSEST(data * 3125, 100));
+ default:
+ return -EINVAL;
+ }
+}
+
+static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO,
+ ad7314_show_temperature, NULL, 0);
+
+static struct attribute *ad7314_attributes[] = {
+ &sensor_dev_attr_temp1_input.dev_attr.attr,
+ NULL,
+};
+
+static const struct attribute_group ad7314_group = {
+ .attrs = ad7314_attributes,
+};
+
+static int __devinit ad7314_probe(struct spi_device *spi_dev)
+{
+ int ret;
+ struct ad7314_data *chip;
+
+ chip = kzalloc(sizeof(*chip), GFP_KERNEL);
+ if (chip == NULL) {
+ ret = -ENOMEM;
+ goto error_ret;
+ }
+ dev_set_drvdata(&spi_dev->dev, chip);
+
+ ret = sysfs_create_group(&spi_dev->dev.kobj, &ad7314_group);
+ if (ret < 0)
+ goto error_free_chip;
+ chip->hwmon_dev = hwmon_device_register(&spi_dev->dev);
+ if (IS_ERR(chip->hwmon_dev)) {
+ ret = PTR_ERR(chip->hwmon_dev);
+ goto error_remove_group;
+ }
+
+ return 0;
+error_remove_group:
+ sysfs_remove_group(&spi_dev->dev.kobj, &ad7314_group);
+error_free_chip:
+ kfree(chip);
+error_ret:
+ return ret;
+}
+
+static int __devexit ad7314_remove(struct spi_device *spi_dev)
+{
+ struct ad7314_data *chip = dev_get_drvdata(&spi_dev->dev);
+
+ hwmon_device_unregister(chip->hwmon_dev);
+ sysfs_remove_group(&spi_dev->dev.kobj, &ad7314_group);
+ kfree(chip);
+
+ return 0;
+}
+
+static const struct spi_device_id ad7314_id[] = {
+ { "adt7301", adt7301 },
+ { "adt7302", adt7302 },
+ { "ad7314", ad7314 },
+ { }
+};
+MODULE_DEVICE_TABLE(spi, ad7314_id);
+
+static struct spi_driver ad7314_driver = {
+ .driver = {
+ .name = "ad7314",
+ .bus = &spi_bus_type,
+ .owner = THIS_MODULE,
+ },
+ .probe = ad7314_probe,
+ .remove = __devexit_p(ad7314_remove),
+ .id_table = ad7314_id,
+};
+
+static __init int ad7314_init(void)
+{
+ return spi_register_driver(&ad7314_driver);
+}
+module_init(ad7314_init);
+
+static __exit void ad7314_exit(void)
+{
+ spi_unregister_driver(&ad7314_driver);
+}
+module_exit(ad7314_exit);
+
+MODULE_AUTHOR("Sonic Zhang <sonic.zhang@analog.com>");
+MODULE_DESCRIPTION("Analog Devices AD7314, ADT7301 and ADT7302 digital"
+ " temperature sensor driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/hwmon/exynos4_tmu.c b/drivers/hwmon/exynos4_tmu.c
new file mode 100644
index 00000000000..faa0884f61f
--- /dev/null
+++ b/drivers/hwmon/exynos4_tmu.c
@@ -0,0 +1,524 @@
+/*
+ * exynos4_tmu.c - Samsung EXYNOS4 TMU (Thermal Management Unit)
+ *
+ * Copyright (C) 2011 Samsung Electronics
+ * Donggeun Kim <dg77.kim@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/err.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/clk.h>
+#include <linux/workqueue.h>
+#include <linux/sysfs.h>
+#include <linux/kobject.h>
+#include <linux/io.h>
+#include <linux/mutex.h>
+
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+
+#include <linux/platform_data/exynos4_tmu.h>
+
+#define EXYNOS4_TMU_REG_TRIMINFO 0x0
+#define EXYNOS4_TMU_REG_CONTROL 0x20
+#define EXYNOS4_TMU_REG_STATUS 0x28
+#define EXYNOS4_TMU_REG_CURRENT_TEMP 0x40
+#define EXYNOS4_TMU_REG_THRESHOLD_TEMP 0x44
+#define EXYNOS4_TMU_REG_TRIG_LEVEL0 0x50
+#define EXYNOS4_TMU_REG_TRIG_LEVEL1 0x54
+#define EXYNOS4_TMU_REG_TRIG_LEVEL2 0x58
+#define EXYNOS4_TMU_REG_TRIG_LEVEL3 0x5C
+#define EXYNOS4_TMU_REG_PAST_TEMP0 0x60
+#define EXYNOS4_TMU_REG_PAST_TEMP1 0x64
+#define EXYNOS4_TMU_REG_PAST_TEMP2 0x68
+#define EXYNOS4_TMU_REG_PAST_TEMP3 0x6C
+#define EXYNOS4_TMU_REG_INTEN 0x70
+#define EXYNOS4_TMU_REG_INTSTAT 0x74
+#define EXYNOS4_TMU_REG_INTCLEAR 0x78
+
+#define EXYNOS4_TMU_GAIN_SHIFT 8
+#define EXYNOS4_TMU_REF_VOLTAGE_SHIFT 24
+
+#define EXYNOS4_TMU_TRIM_TEMP_MASK 0xff
+#define EXYNOS4_TMU_CORE_ON 3
+#define EXYNOS4_TMU_CORE_OFF 2
+#define EXYNOS4_TMU_DEF_CODE_TO_TEMP_OFFSET 50
+#define EXYNOS4_TMU_TRIG_LEVEL0_MASK 0x1
+#define EXYNOS4_TMU_TRIG_LEVEL1_MASK 0x10
+#define EXYNOS4_TMU_TRIG_LEVEL2_MASK 0x100
+#define EXYNOS4_TMU_TRIG_LEVEL3_MASK 0x1000
+#define EXYNOS4_TMU_INTCLEAR_VAL 0x1111
+
+struct exynos4_tmu_data {
+ struct exynos4_tmu_platform_data *pdata;
+ struct device *hwmon_dev;
+ struct resource *mem;
+ void __iomem *base;
+ int irq;
+ struct work_struct irq_work;
+ struct mutex lock;
+ struct clk *clk;
+ u8 temp_error1, temp_error2;
+};
+
+/*
+ * TMU treats temperature as a mapped temperature code.
+ * The temperature is converted differently depending on the calibration type.
+ */
+static int temp_to_code(struct exynos4_tmu_data *data, u8 temp)
+{
+ struct exynos4_tmu_platform_data *pdata = data->pdata;
+ int temp_code;
+
+ /* temp should range between 25 and 125 */
+ if (temp < 25 || temp > 125) {
+ temp_code = -EINVAL;
+ goto out;
+ }
+
+ switch (pdata->cal_type) {
+ case TYPE_TWO_POINT_TRIMMING:
+ temp_code = (temp - 25) *
+ (data->temp_error2 - data->temp_error1) /
+ (85 - 25) + data->temp_error1;
+ break;
+ case TYPE_ONE_POINT_TRIMMING:
+ temp_code = temp + data->temp_error1 - 25;
+ break;
+ default:
+ temp_code = temp + EXYNOS4_TMU_DEF_CODE_TO_TEMP_OFFSET;
+ break;
+ }
+out:
+ return temp_code;
+}
+
+/*
+ * Calculate a temperature value from a temperature code.
+ * The unit of the temperature is degree Celsius.
+ */
+static int code_to_temp(struct exynos4_tmu_data *data, u8 temp_code)
+{
+ struct exynos4_tmu_platform_data *pdata = data->pdata;
+ int temp;
+
+ /* temp_code should range between 75 and 175 */
+ if (temp_code < 75 || temp_code > 175) {
+ temp = -ENODATA;
+ goto out;
+ }
+
+ switch (pdata->cal_type) {
+ case TYPE_TWO_POINT_TRIMMING:
+ temp = (temp_code - data->temp_error1) * (85 - 25) /
+ (data->temp_error2 - data->temp_error1) + 25;
+ break;
+ case TYPE_ONE_POINT_TRIMMING:
+ temp = temp_code - data->temp_error1 + 25;
+ break;
+ default:
+ temp = temp_code - EXYNOS4_TMU_DEF_CODE_TO_TEMP_OFFSET;
+ break;
+ }
+out:
+ return temp;
+}
+
+static int exynos4_tmu_initialize(struct platform_device *pdev)
+{
+ struct exynos4_tmu_data *data = platform_get_drvdata(pdev);
+ struct exynos4_tmu_platform_data *pdata = data->pdata;
+ unsigned int status, trim_info;
+ int ret = 0, threshold_code;
+
+ mutex_lock(&data->lock);
+ clk_enable(data->clk);
+
+ status = readb(data->base + EXYNOS4_TMU_REG_STATUS);
+ if (!status) {
+ ret = -EBUSY;
+ goto out;
+ }
+
+ /* Save trimming info in order to perform calibration */
+ trim_info = readl(data->base + EXYNOS4_TMU_REG_TRIMINFO);
+ data->temp_error1 = trim_info & EXYNOS4_TMU_TRIM_TEMP_MASK;
+ data->temp_error2 = ((trim_info >> 8) & EXYNOS4_TMU_TRIM_TEMP_MASK);
+
+ /* Write temperature code for threshold */
+ threshold_code = temp_to_code(data, pdata->threshold);
+ if (threshold_code < 0) {
+ ret = threshold_code;
+ goto out;
+ }
+ writeb(threshold_code,
+ data->base + EXYNOS4_TMU_REG_THRESHOLD_TEMP);
+
+ writeb(pdata->trigger_levels[0],
+ data->base + EXYNOS4_TMU_REG_TRIG_LEVEL0);
+ writeb(pdata->trigger_levels[1],
+ data->base + EXYNOS4_TMU_REG_TRIG_LEVEL1);
+ writeb(pdata->trigger_levels[2],
+ data->base + EXYNOS4_TMU_REG_TRIG_LEVEL2);
+ writeb(pdata->trigger_levels[3],
+ data->base + EXYNOS4_TMU_REG_TRIG_LEVEL3);
+
+ writel(EXYNOS4_TMU_INTCLEAR_VAL,
+ data->base + EXYNOS4_TMU_REG_INTCLEAR);
+out:
+ clk_disable(data->clk);
+ mutex_unlock(&data->lock);
+
+ return ret;
+}
+
+static void exynos4_tmu_control(struct platform_device *pdev, bool on)
+{
+ struct exynos4_tmu_data *data = platform_get_drvdata(pdev);
+ struct exynos4_tmu_platform_data *pdata = data->pdata;
+ unsigned int con, interrupt_en;
+
+ mutex_lock(&data->lock);
+ clk_enable(data->clk);
+
+ con = pdata->reference_voltage << EXYNOS4_TMU_REF_VOLTAGE_SHIFT |
+ pdata->gain << EXYNOS4_TMU_GAIN_SHIFT;
+ if (on) {
+ con |= EXYNOS4_TMU_CORE_ON;
+ interrupt_en = pdata->trigger_level3_en << 12 |
+ pdata->trigger_level2_en << 8 |
+ pdata->trigger_level1_en << 4 |
+ pdata->trigger_level0_en;
+ } else {
+ con |= EXYNOS4_TMU_CORE_OFF;
+ interrupt_en = 0; /* Disable all interrupts */
+ }
+ writel(interrupt_en, data->base + EXYNOS4_TMU_REG_INTEN);
+ writel(con, data->base + EXYNOS4_TMU_REG_CONTROL);
+
+ clk_disable(data->clk);
+ mutex_unlock(&data->lock);
+}
+
+static int exynos4_tmu_read(struct exynos4_tmu_data *data)
+{
+ u8 temp_code;
+ int temp;
+
+ mutex_lock(&data->lock);
+ clk_enable(data->clk);
+
+ temp_code = readb(data->base + EXYNOS4_TMU_REG_CURRENT_TEMP);
+ temp = code_to_temp(data, temp_code);
+
+ clk_disable(data->clk);
+ mutex_unlock(&data->lock);
+
+ return temp;
+}
+
+static void exynos4_tmu_work(struct work_struct *work)
+{
+ struct exynos4_tmu_data *data = container_of(work,
+ struct exynos4_tmu_data, irq_work);
+
+ mutex_lock(&data->lock);
+ clk_enable(data->clk);
+
+ writel(EXYNOS4_TMU_INTCLEAR_VAL, data->base + EXYNOS4_TMU_REG_INTCLEAR);
+
+ kobject_uevent(&data->hwmon_dev->kobj, KOBJ_CHANGE);
+
+ enable_irq(data->irq);
+
+ clk_disable(data->clk);
+ mutex_unlock(&data->lock);
+}
+
+static irqreturn_t exynos4_tmu_irq(int irq, void *id)
+{
+ struct exynos4_tmu_data *data = id;
+
+ disable_irq_nosync(irq);
+ schedule_work(&data->irq_work);
+
+ return IRQ_HANDLED;
+}
+
+static ssize_t exynos4_tmu_show_name(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return sprintf(buf, "exynos4-tmu\n");
+}
+
+static ssize_t exynos4_tmu_show_temp(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct exynos4_tmu_data *data = dev_get_drvdata(dev);
+ int ret;
+
+ ret = exynos4_tmu_read(data);
+ if (ret < 0)
+ return ret;
+
+ /* convert from degree Celsius to millidegree Celsius */
+ return sprintf(buf, "%d\n", ret * 1000);
+}
+
+static ssize_t exynos4_tmu_show_alarm(struct device *dev,
+ struct device_attribute *devattr, char *buf)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ struct exynos4_tmu_data *data = dev_get_drvdata(dev);
+ struct exynos4_tmu_platform_data *pdata = data->pdata;
+ int temp;
+ unsigned int trigger_level;
+
+ temp = exynos4_tmu_read(data);
+ if (temp < 0)
+ return temp;
+
+ trigger_level = pdata->threshold + pdata->trigger_levels[attr->index];
+
+ return sprintf(buf, "%d\n", !!(temp > trigger_level));
+}
+
+static ssize_t exynos4_tmu_show_level(struct device *dev,
+ struct device_attribute *devattr, char *buf)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ struct exynos4_tmu_data *data = dev_get_drvdata(dev);
+ struct exynos4_tmu_platform_data *pdata = data->pdata;
+ unsigned int temp = pdata->threshold +
+ pdata->trigger_levels[attr->index];
+
+ return sprintf(buf, "%u\n", temp * 1000);
+}
+
+static DEVICE_ATTR(name, S_IRUGO, exynos4_tmu_show_name, NULL);
+static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, exynos4_tmu_show_temp, NULL, 0);
+
+static SENSOR_DEVICE_ATTR(temp1_max_alarm, S_IRUGO,
+ exynos4_tmu_show_alarm, NULL, 1);
+static SENSOR_DEVICE_ATTR(temp1_crit_alarm, S_IRUGO,
+ exynos4_tmu_show_alarm, NULL, 2);
+static SENSOR_DEVICE_ATTR(temp1_emergency_alarm, S_IRUGO,
+ exynos4_tmu_show_alarm, NULL, 3);
+
+static SENSOR_DEVICE_ATTR(temp1_max, S_IRUGO, exynos4_tmu_show_level, NULL, 1);
+static SENSOR_DEVICE_ATTR(temp1_crit, S_IRUGO, exynos4_tmu_show_level, NULL, 2);
+static SENSOR_DEVICE_ATTR(temp1_emergency, S_IRUGO,
+ exynos4_tmu_show_level, NULL, 3);
+
+static struct attribute *exynos4_tmu_attributes[] = {
+ &dev_attr_name.attr,
+ &sensor_dev_attr_temp1_input.dev_attr.attr,
+ &sensor_dev_attr_temp1_max_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp1_crit_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp1_emergency_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp1_max.dev_attr.attr,
+ &sensor_dev_attr_temp1_crit.dev_attr.attr,
+ &sensor_dev_attr_temp1_emergency.dev_attr.attr,
+ NULL,
+};
+
+static const struct attribute_group exynos4_tmu_attr_group = {
+ .attrs = exynos4_tmu_attributes,
+};
+
+static int __devinit exynos4_tmu_probe(struct platform_device *pdev)
+{
+ struct exynos4_tmu_data *data;
+ struct exynos4_tmu_platform_data *pdata = pdev->dev.platform_data;
+ int ret;
+
+ if (!pdata) {
+ dev_err(&pdev->dev, "No platform init data supplied.\n");
+ return -ENODEV;
+ }
+
+ data = kzalloc(sizeof(struct exynos4_tmu_data), GFP_KERNEL);
+ if (!data) {
+ dev_err(&pdev->dev, "Failed to allocate driver structure\n");
+ return -ENOMEM;
+ }
+
+ data->irq = platform_get_irq(pdev, 0);
+ if (data->irq < 0) {
+ ret = data->irq;
+ dev_err(&pdev->dev, "Failed to get platform irq\n");
+ goto err_free;
+ }
+
+ INIT_WORK(&data->irq_work, exynos4_tmu_work);
+
+ data->mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!data->mem) {
+ ret = -ENOENT;
+ dev_err(&pdev->dev, "Failed to get platform resource\n");
+ goto err_free;
+ }
+
+ data->mem = request_mem_region(data->mem->start,
+ resource_size(data->mem), pdev->name);
+ if (!data->mem) {
+ ret = -ENODEV;
+ dev_err(&pdev->dev, "Failed to request memory region\n");
+ goto err_free;
+ }
+
+ data->base = ioremap(data->mem->start, resource_size(data->mem));
+ if (!data->base) {
+ ret = -ENODEV;
+ dev_err(&pdev->dev, "Failed to ioremap memory\n");
+ goto err_mem_region;
+ }
+
+ ret = request_irq(data->irq, exynos4_tmu_irq,
+ IRQF_TRIGGER_RISING,
+ "exynos4-tmu", data);
+ if (ret) {
+ dev_err(&pdev->dev, "Failed to request irq: %d\n", data->irq);
+ goto err_io_remap;
+ }
+
+ data->clk = clk_get(NULL, "tmu_apbif");
+ if (IS_ERR(data->clk)) {
+ ret = PTR_ERR(data->clk);
+ dev_err(&pdev->dev, "Failed to get clock\n");
+ goto err_irq;
+ }
+
+ data->pdata = pdata;
+ platform_set_drvdata(pdev, data);
+ mutex_init(&data->lock);
+
+ ret = exynos4_tmu_initialize(pdev);
+ if (ret) {
+ dev_err(&pdev->dev, "Failed to initialize TMU\n");
+ goto err_clk;
+ }
+
+ ret = sysfs_create_group(&pdev->dev.kobj, &exynos4_tmu_attr_group);
+ if (ret) {
+ dev_err(&pdev->dev, "Failed to create sysfs group\n");
+ goto err_clk;
+ }
+
+ data->hwmon_dev = hwmon_device_register(&pdev->dev);
+ if (IS_ERR(data->hwmon_dev)) {
+ ret = PTR_ERR(data->hwmon_dev);
+ dev_err(&pdev->dev, "Failed to register hwmon device\n");
+ goto err_create_group;
+ }
+
+ exynos4_tmu_control(pdev, true);
+
+ return 0;
+
+err_create_group:
+ sysfs_remove_group(&pdev->dev.kobj, &exynos4_tmu_attr_group);
+err_clk:
+ platform_set_drvdata(pdev, NULL);
+ clk_put(data->clk);
+err_irq:
+ free_irq(data->irq, data);
+err_io_remap:
+ iounmap(data->base);
+err_mem_region:
+ release_mem_region(data->mem->start, resource_size(data->mem));
+err_free:
+ kfree(data);
+
+ return ret;
+}
+
+static int __devexit exynos4_tmu_remove(struct platform_device *pdev)
+{
+ struct exynos4_tmu_data *data = platform_get_drvdata(pdev);
+
+ exynos4_tmu_control(pdev, false);
+
+ hwmon_device_unregister(data->hwmon_dev);
+ sysfs_remove_group(&pdev->dev.kobj, &exynos4_tmu_attr_group);
+
+ clk_put(data->clk);
+
+ free_irq(data->irq, data);
+
+ iounmap(data->base);
+ release_mem_region(data->mem->start, resource_size(data->mem));
+
+ platform_set_drvdata(pdev, NULL);
+
+ kfree(data);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int exynos4_tmu_suspend(struct platform_device *pdev, pm_message_t state)
+{
+ exynos4_tmu_control(pdev, false);
+
+ return 0;
+}
+
+static int exynos4_tmu_resume(struct platform_device *pdev)
+{
+ exynos4_tmu_initialize(pdev);
+ exynos4_tmu_control(pdev, true);
+
+ return 0;
+}
+#else
+#define exynos4_tmu_suspend NULL
+#define exynos4_tmu_resume NULL
+#endif
+
+static struct platform_driver exynos4_tmu_driver = {
+ .driver = {
+ .name = "exynos4-tmu",
+ .owner = THIS_MODULE,
+ },
+ .probe = exynos4_tmu_probe,
+ .remove = __devexit_p(exynos4_tmu_remove),
+ .suspend = exynos4_tmu_suspend,
+ .resume = exynos4_tmu_resume,
+};
+
+static int __init exynos4_tmu_driver_init(void)
+{
+ return platform_driver_register(&exynos4_tmu_driver);
+}
+module_init(exynos4_tmu_driver_init);
+
+static void __exit exynos4_tmu_driver_exit(void)
+{
+ platform_driver_unregister(&exynos4_tmu_driver);
+}
+module_exit(exynos4_tmu_driver_exit);
+
+MODULE_DESCRIPTION("EXYNOS4 TMU Driver");
+MODULE_AUTHOR("Donggeun Kim <dg77.kim@samsung.com>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:exynos4-tmu");
diff --git a/drivers/hwmon/f71882fg.c b/drivers/hwmon/f71882fg.c
index 2d96ed2bf8e..59dd881c71d 100644
--- a/drivers/hwmon/f71882fg.c
+++ b/drivers/hwmon/f71882fg.c
@@ -605,7 +605,7 @@ static struct sensor_device_attribute_2 fxxxx_fan_beep_attr[] = {
/* PWM attr for the f71862fg, fewer pwms and fewer zones per pwm than the
standard models */
-static struct sensor_device_attribute_2 f71862fg_auto_pwm_attr[] = {
+static struct sensor_device_attribute_2 f71862fg_auto_pwm_attr[3][7] = { {
SENSOR_ATTR_2(pwm1_auto_channels_temp, S_IRUGO|S_IWUSR,
show_pwm_auto_point_channel,
store_pwm_auto_point_channel, 0, 0),
@@ -627,7 +627,7 @@ static struct sensor_device_attribute_2 f71862fg_auto_pwm_attr[] = {
0, 0),
SENSOR_ATTR_2(pwm1_auto_point2_temp_hyst, S_IRUGO,
show_pwm_auto_point_temp_hyst, NULL, 3, 0),
-
+}, {
SENSOR_ATTR_2(pwm2_auto_channels_temp, S_IRUGO|S_IWUSR,
show_pwm_auto_point_channel,
store_pwm_auto_point_channel, 0, 1),
@@ -649,7 +649,7 @@ static struct sensor_device_attribute_2 f71862fg_auto_pwm_attr[] = {
0, 1),
SENSOR_ATTR_2(pwm2_auto_point2_temp_hyst, S_IRUGO,
show_pwm_auto_point_temp_hyst, NULL, 3, 1),
-
+}, {
SENSOR_ATTR_2(pwm3_auto_channels_temp, S_IRUGO|S_IWUSR,
show_pwm_auto_point_channel,
store_pwm_auto_point_channel, 0, 2),
@@ -671,12 +671,12 @@ static struct sensor_device_attribute_2 f71862fg_auto_pwm_attr[] = {
0, 2),
SENSOR_ATTR_2(pwm3_auto_point2_temp_hyst, S_IRUGO,
show_pwm_auto_point_temp_hyst, NULL, 3, 2),
-};
+} };
/* PWM attr for the f71808e/f71869, almost identical to the f71862fg, but the
pwm setting when the temperature is above the pwmX_auto_point1_temp can be
programmed instead of being hardcoded to 0xff */
-static struct sensor_device_attribute_2 f71869_auto_pwm_attr[] = {
+static struct sensor_device_attribute_2 f71869_auto_pwm_attr[3][8] = { {
SENSOR_ATTR_2(pwm1_auto_channels_temp, S_IRUGO|S_IWUSR,
show_pwm_auto_point_channel,
store_pwm_auto_point_channel, 0, 0),
@@ -701,7 +701,7 @@ static struct sensor_device_attribute_2 f71869_auto_pwm_attr[] = {
0, 0),
SENSOR_ATTR_2(pwm1_auto_point2_temp_hyst, S_IRUGO,
show_pwm_auto_point_temp_hyst, NULL, 3, 0),
-
+}, {
SENSOR_ATTR_2(pwm2_auto_channels_temp, S_IRUGO|S_IWUSR,
show_pwm_auto_point_channel,
store_pwm_auto_point_channel, 0, 1),
@@ -726,7 +726,7 @@ static struct sensor_device_attribute_2 f71869_auto_pwm_attr[] = {
0, 1),
SENSOR_ATTR_2(pwm2_auto_point2_temp_hyst, S_IRUGO,
show_pwm_auto_point_temp_hyst, NULL, 3, 1),
-
+}, {
SENSOR_ATTR_2(pwm3_auto_channels_temp, S_IRUGO|S_IWUSR,
show_pwm_auto_point_channel,
store_pwm_auto_point_channel, 0, 2),
@@ -751,7 +751,7 @@ static struct sensor_device_attribute_2 f71869_auto_pwm_attr[] = {
0, 2),
SENSOR_ATTR_2(pwm3_auto_point2_temp_hyst, S_IRUGO,
show_pwm_auto_point_temp_hyst, NULL, 3, 2),
-};
+} };
/* PWM attr for the standard models */
static struct sensor_device_attribute_2 fxxxx_auto_pwm_attr[4][14] = { {
@@ -928,7 +928,7 @@ static struct sensor_device_attribute_2 f8000_fan_attr[] = {
/* PWM attr for the f8000, zones mapped to temp instead of to pwm!
Also the register block at offset A0 maps to TEMP1 (so our temp2, as the
F8000 starts counting temps at 0), B0 maps the TEMP2 and C0 maps to TEMP0 */
-static struct sensor_device_attribute_2 f8000_auto_pwm_attr[] = {
+static struct sensor_device_attribute_2 f8000_auto_pwm_attr[3][14] = { {
SENSOR_ATTR_2(pwm1_auto_channels_temp, S_IRUGO|S_IWUSR,
show_pwm_auto_point_channel,
store_pwm_auto_point_channel, 0, 0),
@@ -969,7 +969,7 @@ static struct sensor_device_attribute_2 f8000_auto_pwm_attr[] = {
show_pwm_auto_point_temp_hyst, NULL, 2, 2),
SENSOR_ATTR_2(temp1_auto_point4_temp_hyst, S_IRUGO,
show_pwm_auto_point_temp_hyst, NULL, 3, 2),
-
+}, {
SENSOR_ATTR_2(pwm2_auto_channels_temp, S_IRUGO|S_IWUSR,
show_pwm_auto_point_channel,
store_pwm_auto_point_channel, 0, 1),
@@ -1010,7 +1010,7 @@ static struct sensor_device_attribute_2 f8000_auto_pwm_attr[] = {
show_pwm_auto_point_temp_hyst, NULL, 2, 0),
SENSOR_ATTR_2(temp2_auto_point4_temp_hyst, S_IRUGO,
show_pwm_auto_point_temp_hyst, NULL, 3, 0),
-
+}, {
SENSOR_ATTR_2(pwm3_auto_channels_temp, S_IRUGO|S_IWUSR,
show_pwm_auto_point_channel,
store_pwm_auto_point_channel, 0, 2),
@@ -1051,7 +1051,7 @@ static struct sensor_device_attribute_2 f8000_auto_pwm_attr[] = {
show_pwm_auto_point_temp_hyst, NULL, 2, 1),
SENSOR_ATTR_2(temp3_auto_point4_temp_hyst, S_IRUGO,
show_pwm_auto_point_temp_hyst, NULL, 3, 1),
-};
+} };
/* Super I/O functions */
static inline int superio_inb(int base, int reg)
@@ -2154,6 +2154,104 @@ static void f71882fg_remove_sysfs_files(struct platform_device *pdev,
device_remove_file(&pdev->dev, &attr[i].dev_attr);
}
+static int __devinit f71882fg_create_fan_sysfs_files(
+ struct platform_device *pdev, int idx)
+{
+ struct f71882fg_data *data = platform_get_drvdata(pdev);
+ int err;
+
+ /* Sanity check the pwm setting */
+ err = 0;
+ switch (data->type) {
+ case f71858fg:
+ if (((data->pwm_enable >> (idx * 2)) & 3) == 3)
+ err = 1;
+ break;
+ case f71862fg:
+ if (((data->pwm_enable >> (idx * 2)) & 1) != 1)
+ err = 1;
+ break;
+ case f8000:
+ if (idx == 2)
+ err = data->pwm_enable & 0x20;
+ break;
+ default:
+ break;
+ }
+ if (err) {
+ dev_err(&pdev->dev,
+ "Invalid (reserved) pwm settings: 0x%02x, "
+ "skipping fan %d\n",
+ (data->pwm_enable >> (idx * 2)) & 3, idx + 1);
+ return 0; /* This is a non fatal condition */
+ }
+
+ err = f71882fg_create_sysfs_files(pdev, &fxxxx_fan_attr[idx][0],
+ ARRAY_SIZE(fxxxx_fan_attr[0]));
+ if (err)
+ return err;
+
+ if (f71882fg_fan_has_beep[data->type]) {
+ err = f71882fg_create_sysfs_files(pdev,
+ &fxxxx_fan_beep_attr[idx],
+ 1);
+ if (err)
+ return err;
+ }
+
+ dev_info(&pdev->dev, "Fan: %d is in %s mode\n", idx + 1,
+ (data->pwm_enable & (1 << (2 * idx))) ? "duty-cycle" : "RPM");
+
+ /* Check for unsupported auto pwm settings */
+ switch (data->type) {
+ case f71808e:
+ case f71808a:
+ case f71869:
+ case f71869a:
+ case f71889fg:
+ case f71889ed:
+ case f71889a:
+ data->pwm_auto_point_mapping[idx] =
+ f71882fg_read8(data, F71882FG_REG_POINT_MAPPING(idx));
+ if ((data->pwm_auto_point_mapping[idx] & 0x80) ||
+ (data->pwm_auto_point_mapping[idx] & 3) == 0) {
+ dev_warn(&pdev->dev,
+ "Auto pwm controlled by raw digital "
+ "data, disabling pwm auto_point "
+ "sysfs attributes for fan %d\n", idx + 1);
+ return 0; /* This is a non fatal condition */
+ }
+ break;
+ default:
+ break;
+ }
+
+ switch (data->type) {
+ case f71862fg:
+ err = f71882fg_create_sysfs_files(pdev,
+ &f71862fg_auto_pwm_attr[idx][0],
+ ARRAY_SIZE(f71862fg_auto_pwm_attr[0]));
+ break;
+ case f71808e:
+ case f71869:
+ err = f71882fg_create_sysfs_files(pdev,
+ &f71869_auto_pwm_attr[idx][0],
+ ARRAY_SIZE(f71869_auto_pwm_attr[0]));
+ break;
+ case f8000:
+ err = f71882fg_create_sysfs_files(pdev,
+ &f8000_auto_pwm_attr[idx][0],
+ ARRAY_SIZE(f8000_auto_pwm_attr[0]));
+ break;
+ default:
+ err = f71882fg_create_sysfs_files(pdev,
+ &fxxxx_auto_pwm_attr[idx][0],
+ ARRAY_SIZE(fxxxx_auto_pwm_attr[0]));
+ }
+
+ return err;
+}
+
static int __devinit f71882fg_probe(struct platform_device *pdev)
{
struct f71882fg_data *data;
@@ -2272,117 +2370,29 @@ static int __devinit f71882fg_probe(struct platform_device *pdev)
data->pwm_enable =
f71882fg_read8(data, F71882FG_REG_PWM_ENABLE);
- /* Sanity check the pwm settings */
- switch (data->type) {
- case f71858fg:
- err = 0;
- for (i = 0; i < nr_fans; i++)
- if (((data->pwm_enable >> (i * 2)) & 3) == 3)
- err = 1;
- break;
- case f71862fg:
- err = (data->pwm_enable & 0x15) != 0x15;
- break;
- case f8000:
- err = data->pwm_enable & 0x20;
- break;
- default:
- err = 0;
- break;
- }
- if (err) {
- dev_err(&pdev->dev,
- "Invalid (reserved) pwm settings: 0x%02x\n",
- (unsigned int)data->pwm_enable);
- err = -ENODEV;
- goto exit_unregister_sysfs;
- }
-
- err = f71882fg_create_sysfs_files(pdev, &fxxxx_fan_attr[0][0],
- ARRAY_SIZE(fxxxx_fan_attr[0]) * nr_fans);
- if (err)
- goto exit_unregister_sysfs;
-
- if (f71882fg_fan_has_beep[data->type]) {
- err = f71882fg_create_sysfs_files(pdev,
- fxxxx_fan_beep_attr, nr_fans);
+ for (i = 0; i < nr_fans; i++) {
+ err = f71882fg_create_fan_sysfs_files(pdev, i);
if (err)
goto exit_unregister_sysfs;
}
- switch (data->type) {
- case f71808e:
- case f71808a:
- case f71869:
- case f71869a:
- case f71889fg:
- case f71889ed:
- case f71889a:
- for (i = 0; i < nr_fans; i++) {
- data->pwm_auto_point_mapping[i] =
- f71882fg_read8(data,
- F71882FG_REG_POINT_MAPPING(i));
- if ((data->pwm_auto_point_mapping[i] & 0x80) ||
- (data->pwm_auto_point_mapping[i] & 3) == 0)
- break;
- }
- if (i != nr_fans) {
- dev_warn(&pdev->dev,
- "Auto pwm controlled by raw digital "
- "data, disabling pwm auto_point "
- "sysfs attributes\n");
- goto no_pwm_auto_point;
- }
- break;
- default:
- break;
- }
-
+ /* Some types have 1 extra fan with limited functionality */
switch (data->type) {
case f71808a:
err = f71882fg_create_sysfs_files(pdev,
- &fxxxx_auto_pwm_attr[0][0],
- ARRAY_SIZE(fxxxx_auto_pwm_attr[0]) * nr_fans);
- if (err)
- goto exit_unregister_sysfs;
- err = f71882fg_create_sysfs_files(pdev,
f71808a_fan3_attr,
ARRAY_SIZE(f71808a_fan3_attr));
break;
- case f71862fg:
- err = f71882fg_create_sysfs_files(pdev,
- f71862fg_auto_pwm_attr,
- ARRAY_SIZE(f71862fg_auto_pwm_attr));
- break;
- case f71808e:
- case f71869:
- err = f71882fg_create_sysfs_files(pdev,
- f71869_auto_pwm_attr,
- ARRAY_SIZE(f71869_auto_pwm_attr));
- break;
case f8000:
err = f71882fg_create_sysfs_files(pdev,
f8000_fan_attr,
ARRAY_SIZE(f8000_fan_attr));
- if (err)
- goto exit_unregister_sysfs;
- err = f71882fg_create_sysfs_files(pdev,
- f8000_auto_pwm_attr,
- ARRAY_SIZE(f8000_auto_pwm_attr));
break;
default:
- err = f71882fg_create_sysfs_files(pdev,
- &fxxxx_auto_pwm_attr[0][0],
- ARRAY_SIZE(fxxxx_auto_pwm_attr[0]) * nr_fans);
+ break;
}
if (err)
goto exit_unregister_sysfs;
-
-no_pwm_auto_point:
- for (i = 0; i < nr_fans; i++)
- dev_info(&pdev->dev, "Fan: %d is in %s mode\n", i + 1,
- (data->pwm_enable & (1 << 2 * i)) ?
- "duty-cycle" : "RPM");
}
data->hwmon_dev = hwmon_device_register(&pdev->dev);
@@ -2476,22 +2486,23 @@ static int f71882fg_remove(struct platform_device *pdev)
break;
case f71862fg:
f71882fg_remove_sysfs_files(pdev,
- f71862fg_auto_pwm_attr,
- ARRAY_SIZE(f71862fg_auto_pwm_attr));
+ &f71862fg_auto_pwm_attr[0][0],
+ ARRAY_SIZE(f71862fg_auto_pwm_attr[0]) *
+ nr_fans);
break;
case f71808e:
case f71869:
f71882fg_remove_sysfs_files(pdev,
- f71869_auto_pwm_attr,
- ARRAY_SIZE(f71869_auto_pwm_attr));
+ &f71869_auto_pwm_attr[0][0],
+ ARRAY_SIZE(f71869_auto_pwm_attr[0]) * nr_fans);
break;
case f8000:
f71882fg_remove_sysfs_files(pdev,
f8000_fan_attr,
ARRAY_SIZE(f8000_fan_attr));
f71882fg_remove_sysfs_files(pdev,
- f8000_auto_pwm_attr,
- ARRAY_SIZE(f8000_auto_pwm_attr));
+ &f8000_auto_pwm_attr[0][0],
+ ARRAY_SIZE(f8000_auto_pwm_attr[0]) * nr_fans);
break;
default:
f71882fg_remove_sysfs_files(pdev,
diff --git a/drivers/hwmon/lm75.c b/drivers/hwmon/lm75.c
index ef902d5d06a..90126a2a1e4 100644
--- a/drivers/hwmon/lm75.c
+++ b/drivers/hwmon/lm75.c
@@ -35,6 +35,7 @@
*/
enum lm75_type { /* keep sorted in alphabetical order */
+ adt75,
ds1775,
ds75,
lm75,
@@ -213,6 +214,7 @@ static int lm75_remove(struct i2c_client *client)
}
static const struct i2c_device_id lm75_ids[] = {
+ { "adt75", adt75, },
{ "ds1775", ds1775, },
{ "ds75", ds75, },
{ "lm75", lm75, },
@@ -247,19 +249,30 @@ static int lm75_detect(struct i2c_client *new_client,
I2C_FUNC_SMBUS_WORD_DATA))
return -ENODEV;
- /* Now, we do the remaining detection. There is no identification-
- dedicated register so we have to rely on several tricks:
- unused bits, registers cycling over 8-address boundaries,
- addresses 0x04-0x07 returning the last read value.
- The cycling+unused addresses combination is not tested,
- since it would significantly slow the detection down and would
- hardly add any value.
-
- The National Semiconductor LM75A is different than earlier
- LM75s. It has an ID byte of 0xaX (where X is the chip
- revision, with 1 being the only revision in existence) in
- register 7, and unused registers return 0xff rather than the
- last read value. */
+ /*
+ * Now, we do the remaining detection. There is no identification-
+ * dedicated register so we have to rely on several tricks:
+ * unused bits, registers cycling over 8-address boundaries,
+ * addresses 0x04-0x07 returning the last read value.
+ * The cycling+unused addresses combination is not tested,
+ * since it would significantly slow the detection down and would
+ * hardly add any value.
+ *
+ * The National Semiconductor LM75A is different than earlier
+ * LM75s. It has an ID byte of 0xaX (where X is the chip
+ * revision, with 1 being the only revision in existence) in
+ * register 7, and unused registers return 0xff rather than the
+ * last read value.
+ *
+ * Note that this function only detects the original National
+ * Semiconductor LM75 and the LM75A. Clones from other vendors
+ * aren't detected, on purpose, because they are typically never
+ * found on PC hardware. They are found on embedded designs where
+ * they can be instantiated explicitly so detection is not needed.
+ * The absence of identification registers on all these clones
+ * would make their exhaustive detection very difficult and weak,
+ * and odds are that the driver would bind to unsupported devices.
+ */
/* Unused bits */
conf = i2c_smbus_read_byte_data(new_client, 1);
diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig
index c9237b9dcff..4b26f51920b 100644
--- a/drivers/hwmon/pmbus/Kconfig
+++ b/drivers/hwmon/pmbus/Kconfig
@@ -20,17 +20,18 @@ config SENSORS_PMBUS
help
If you say yes here you get hardware monitoring support for generic
PMBus devices, including but not limited to ADP4000, BMR450, BMR451,
- BMR453, BMR454, LTC2978, NCP4200, and NCP4208.
+ BMR453, BMR454, NCP4200, and NCP4208.
This driver can also be built as a module. If so, the module will
be called pmbus.
config SENSORS_ADM1275
- tristate "Analog Devices ADM1275"
+ tristate "Analog Devices ADM1275 and compatibles"
default n
help
If you say yes here you get hardware monitoring support for Analog
- Devices ADM1275 Hot-Swap Controller and Digital Power Monitor.
+ Devices ADM1275 and ADM1276 Hot-Swap Controller and Digital Power
+ Monitor.
This driver can also be built as a module. If so, the module will
be called adm1275.
@@ -45,6 +46,16 @@ config SENSORS_LM25066
This driver can also be built as a module. If so, the module will
be called lm25066.
+config SENSORS_LTC2978
+ tristate "Linear Technologies LTC2978 and LTC3880"
+ default n
+ help
+ If you say yes here you get hardware monitoring support for Linear
+ Technology LTC2978 and LTC3880.
+
+ This driver can also be built as a module. If so, the module will
+ be called ltc2978.
+
config SENSORS_MAX16064
tristate "Maxim MAX16064"
default n
@@ -97,4 +108,15 @@ config SENSORS_UCD9200
This driver can also be built as a module. If so, the module will
be called ucd9200.
+config SENSORS_ZL6100
+ tristate "Intersil ZL6100 and compatibles"
+ default n
+ help
+ If you say yes here you get hardware monitoring support for Intersil
+ ZL2004, ZL2006, ZL2008, ZL2105, ZL2106, ZL6100, and ZL6105 Digital
+ DC/DC Controllers.
+
+ This driver can also be built as a module. If so, the module will
+ be called zl6100.
+
endif # PMBUS
diff --git a/drivers/hwmon/pmbus/Makefile b/drivers/hwmon/pmbus/Makefile
index 623eedb1ed9..789376c85db 100644
--- a/drivers/hwmon/pmbus/Makefile
+++ b/drivers/hwmon/pmbus/Makefile
@@ -6,8 +6,10 @@ obj-$(CONFIG_PMBUS) += pmbus_core.o
obj-$(CONFIG_SENSORS_PMBUS) += pmbus.o
obj-$(CONFIG_SENSORS_ADM1275) += adm1275.o
obj-$(CONFIG_SENSORS_LM25066) += lm25066.o
+obj-$(CONFIG_SENSORS_LTC2978) += ltc2978.o
obj-$(CONFIG_SENSORS_MAX16064) += max16064.o
obj-$(CONFIG_SENSORS_MAX34440) += max34440.o
obj-$(CONFIG_SENSORS_MAX8688) += max8688.o
obj-$(CONFIG_SENSORS_UCD9000) += ucd9000.o
obj-$(CONFIG_SENSORS_UCD9200) += ucd9200.o
+obj-$(CONFIG_SENSORS_ZL6100) += zl6100.o
diff --git a/drivers/hwmon/pmbus/adm1275.c b/drivers/hwmon/pmbus/adm1275.c
index c936e278230..980a4d9d502 100644
--- a/drivers/hwmon/pmbus/adm1275.c
+++ b/drivers/hwmon/pmbus/adm1275.c
@@ -23,6 +23,8 @@
#include <linux/i2c.h>
#include "pmbus.h"
+enum chips { adm1275, adm1276 };
+
#define ADM1275_PEAK_IOUT 0xd0
#define ADM1275_PEAK_VIN 0xd1
#define ADM1275_PEAK_VOUT 0xd2
@@ -31,14 +33,47 @@
#define ADM1275_VIN_VOUT_SELECT (1 << 6)
#define ADM1275_VRANGE (1 << 5)
+#define ADM1275_IOUT_WARN2_LIMIT 0xd7
+#define ADM1275_DEVICE_CONFIG 0xd8
+
+#define ADM1275_IOUT_WARN2_SELECT (1 << 4)
+
+#define ADM1276_PEAK_PIN 0xda
+
+#define ADM1275_MFR_STATUS_IOUT_WARN2 (1 << 0)
+
+struct adm1275_data {
+ int id;
+ bool have_oc_fault;
+ struct pmbus_driver_info info;
+};
+
+#define to_adm1275_data(x) container_of(x, struct adm1275_data, info)
+
static int adm1275_read_word_data(struct i2c_client *client, int page, int reg)
{
- int ret;
+ const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
+ const struct adm1275_data *data = to_adm1275_data(info);
+ int ret = 0;
if (page)
- return -EINVAL;
+ return -ENXIO;
switch (reg) {
+ case PMBUS_IOUT_UC_FAULT_LIMIT:
+ if (data->have_oc_fault) {
+ ret = -ENXIO;
+ break;
+ }
+ ret = pmbus_read_word_data(client, 0, ADM1275_IOUT_WARN2_LIMIT);
+ break;
+ case PMBUS_IOUT_OC_FAULT_LIMIT:
+ if (!data->have_oc_fault) {
+ ret = -ENXIO;
+ break;
+ }
+ ret = pmbus_read_word_data(client, 0, ADM1275_IOUT_WARN2_LIMIT);
+ break;
case PMBUS_VIRT_READ_IOUT_MAX:
ret = pmbus_read_word_data(client, 0, ADM1275_PEAK_IOUT);
break;
@@ -48,10 +83,20 @@ static int adm1275_read_word_data(struct i2c_client *client, int page, int reg)
case PMBUS_VIRT_READ_VIN_MAX:
ret = pmbus_read_word_data(client, 0, ADM1275_PEAK_VIN);
break;
+ case PMBUS_VIRT_READ_PIN_MAX:
+ if (data->id != adm1276) {
+ ret = -ENXIO;
+ break;
+ }
+ ret = pmbus_read_word_data(client, 0, ADM1276_PEAK_PIN);
+ break;
case PMBUS_VIRT_RESET_IOUT_HISTORY:
case PMBUS_VIRT_RESET_VOUT_HISTORY:
case PMBUS_VIRT_RESET_VIN_HISTORY:
- ret = 0;
+ break;
+ case PMBUS_VIRT_RESET_PIN_HISTORY:
+ if (data->id != adm1276)
+ ret = -ENXIO;
break;
default:
ret = -ENODATA;
@@ -66,9 +111,14 @@ static int adm1275_write_word_data(struct i2c_client *client, int page, int reg,
int ret;
if (page)
- return -EINVAL;
+ return -ENXIO;
switch (reg) {
+ case PMBUS_IOUT_UC_FAULT_LIMIT:
+ case PMBUS_IOUT_OC_FAULT_LIMIT:
+ ret = pmbus_write_word_data(client, 0, ADM1275_IOUT_WARN2_LIMIT,
+ word);
+ break;
case PMBUS_VIRT_RESET_IOUT_HISTORY:
ret = pmbus_write_word_data(client, 0, ADM1275_PEAK_IOUT, 0);
break;
@@ -78,6 +128,41 @@ static int adm1275_write_word_data(struct i2c_client *client, int page, int reg,
case PMBUS_VIRT_RESET_VIN_HISTORY:
ret = pmbus_write_word_data(client, 0, ADM1275_PEAK_VIN, 0);
break;
+ case PMBUS_VIRT_RESET_PIN_HISTORY:
+ ret = pmbus_write_word_data(client, 0, ADM1276_PEAK_PIN, 0);
+ break;
+ default:
+ ret = -ENODATA;
+ break;
+ }
+ return ret;
+}
+
+static int adm1275_read_byte_data(struct i2c_client *client, int page, int reg)
+{
+ const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
+ const struct adm1275_data *data = to_adm1275_data(info);
+ int mfr_status, ret;
+
+ if (page > 0)
+ return -ENXIO;
+
+ switch (reg) {
+ case PMBUS_STATUS_IOUT:
+ ret = pmbus_read_byte_data(client, page, PMBUS_STATUS_IOUT);
+ if (ret < 0)
+ break;
+ mfr_status = pmbus_read_byte_data(client, page,
+ PMBUS_STATUS_MFR_SPECIFIC);
+ if (mfr_status < 0) {
+ ret = mfr_status;
+ break;
+ }
+ if (mfr_status & ADM1275_MFR_STATUS_IOUT_WARN2) {
+ ret |= data->have_oc_fault ?
+ PB_IOUT_OC_FAULT : PB_IOUT_UC_FAULT;
+ }
+ break;
default:
ret = -ENODATA;
break;
@@ -88,16 +173,17 @@ static int adm1275_write_word_data(struct i2c_client *client, int page, int reg,
static int adm1275_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
- int config;
+ int config, device_config;
int ret;
struct pmbus_driver_info *info;
+ struct adm1275_data *data;
if (!i2c_check_functionality(client->adapter,
I2C_FUNC_SMBUS_READ_BYTE_DATA))
return -ENODEV;
- info = kzalloc(sizeof(struct pmbus_driver_info), GFP_KERNEL);
- if (!info)
+ data = kzalloc(sizeof(struct adm1275_data), GFP_KERNEL);
+ if (!data)
return -ENOMEM;
config = i2c_smbus_read_byte_data(client, ADM1275_PMON_CONFIG);
@@ -106,6 +192,15 @@ static int adm1275_probe(struct i2c_client *client,
goto err_mem;
}
+ device_config = i2c_smbus_read_byte_data(client, ADM1275_DEVICE_CONFIG);
+ if (device_config < 0) {
+ ret = device_config;
+ goto err_mem;
+ }
+
+ data->id = id->driver_data;
+ info = &data->info;
+
info->pages = 1;
info->format[PSC_VOLTAGE_IN] = direct;
info->format[PSC_VOLTAGE_OUT] = direct;
@@ -116,6 +211,7 @@ static int adm1275_probe(struct i2c_client *client,
info->func[0] = PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT;
info->read_word_data = adm1275_read_word_data;
+ info->read_byte_data = adm1275_read_byte_data;
info->write_word_data = adm1275_write_word_data;
if (config & ADM1275_VRANGE) {
@@ -134,10 +230,36 @@ static int adm1275_probe(struct i2c_client *client,
info->R[PSC_VOLTAGE_OUT] = -1;
}
- if (config & ADM1275_VIN_VOUT_SELECT)
- info->func[0] |= PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT;
- else
- info->func[0] |= PMBUS_HAVE_VIN | PMBUS_HAVE_STATUS_INPUT;
+ if (device_config & ADM1275_IOUT_WARN2_SELECT)
+ data->have_oc_fault = true;
+
+ switch (id->driver_data) {
+ case adm1275:
+ if (config & ADM1275_VIN_VOUT_SELECT)
+ info->func[0] |=
+ PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT;
+ else
+ info->func[0] |=
+ PMBUS_HAVE_VIN | PMBUS_HAVE_STATUS_INPUT;
+ break;
+ case adm1276:
+ info->format[PSC_POWER] = direct;
+ info->func[0] |= PMBUS_HAVE_VIN | PMBUS_HAVE_PIN
+ | PMBUS_HAVE_STATUS_INPUT;
+ if (config & ADM1275_VIN_VOUT_SELECT)
+ info->func[0] |=
+ PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT;
+ if (config & ADM1275_VRANGE) {
+ info->m[PSC_POWER] = 6043;
+ info->b[PSC_POWER] = 0;
+ info->R[PSC_POWER] = -2;
+ } else {
+ info->m[PSC_POWER] = 2115;
+ info->b[PSC_POWER] = 0;
+ info->R[PSC_POWER] = -1;
+ }
+ break;
+ }
ret = pmbus_do_probe(client, id, info);
if (ret)
@@ -145,22 +267,23 @@ static int adm1275_probe(struct i2c_client *client,
return 0;
err_mem:
- kfree(info);
+ kfree(data);
return ret;
}
static int adm1275_remove(struct i2c_client *client)
{
const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
- int ret;
+ const struct adm1275_data *data = to_adm1275_data(info);
- ret = pmbus_do_remove(client);
- kfree(info);
- return ret;
+ pmbus_do_remove(client);
+ kfree(data);
+ return 0;
}
static const struct i2c_device_id adm1275_id[] = {
- {"adm1275", 0},
+ { "adm1275", adm1275 },
+ { "adm1276", adm1276 },
{ }
};
MODULE_DEVICE_TABLE(i2c, adm1275_id);
@@ -185,7 +308,7 @@ static void __exit adm1275_exit(void)
}
MODULE_AUTHOR("Guenter Roeck");
-MODULE_DESCRIPTION("PMBus driver for Analog Devices ADM1275");
+MODULE_DESCRIPTION("PMBus driver for Analog Devices ADM1275 and compatibles");
MODULE_LICENSE("GPL");
module_init(adm1275_init);
module_exit(adm1275_exit);
diff --git a/drivers/hwmon/pmbus/lm25066.c b/drivers/hwmon/pmbus/lm25066.c
index ac254fba551..84a37f0c8db 100644
--- a/drivers/hwmon/pmbus/lm25066.c
+++ b/drivers/hwmon/pmbus/lm25066.c
@@ -57,7 +57,7 @@ static int lm25066_read_word_data(struct i2c_client *client, int page, int reg)
int ret;
if (page > 1)
- return -EINVAL;
+ return -ENXIO;
/* Map READ_VAUX into READ_VOUT register on page 1 */
if (page == 1) {
@@ -85,7 +85,7 @@ static int lm25066_read_word_data(struct i2c_client *client, int page, int reg)
break;
default:
/* No other valid registers on page 1 */
- ret = -EINVAL;
+ ret = -ENXIO;
break;
}
goto done;
@@ -138,7 +138,7 @@ static int lm25066_write_word_data(struct i2c_client *client, int page, int reg,
int ret;
if (page > 1)
- return -EINVAL;
+ return -ENXIO;
switch (reg) {
case PMBUS_IIN_OC_WARN_LIMIT:
@@ -164,10 +164,10 @@ static int lm25066_write_word_data(struct i2c_client *client, int page, int reg,
static int lm25066_write_byte(struct i2c_client *client, int page, u8 value)
{
if (page > 1)
- return -EINVAL;
+ return -ENXIO;
- if (page == 0)
- return pmbus_write_byte(client, 0, value);
+ if (page <= 0)
+ return pmbus_write_byte(client, page, value);
return 0;
}
@@ -309,11 +309,10 @@ static int lm25066_remove(struct i2c_client *client)
{
const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
const struct lm25066_data *data = to_lm25066_data(info);
- int ret;
- ret = pmbus_do_remove(client);
+ pmbus_do_remove(client);
kfree(data);
- return ret;
+ return 0;
}
static const struct i2c_device_id lm25066_id[] = {
diff --git a/drivers/hwmon/pmbus/ltc2978.c b/drivers/hwmon/pmbus/ltc2978.c
new file mode 100644
index 00000000000..820fff48910
--- /dev/null
+++ b/drivers/hwmon/pmbus/ltc2978.c
@@ -0,0 +1,408 @@
+/*
+ * Hardware monitoring driver for LTC2978 and LTC3880
+ *
+ * Copyright (c) 2011 Ericsson AB.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include "pmbus.h"
+
+enum chips { ltc2978, ltc3880 };
+
+/* LTC2978 and LTC3880 */
+#define LTC2978_MFR_VOUT_PEAK 0xdd
+#define LTC2978_MFR_VIN_PEAK 0xde
+#define LTC2978_MFR_TEMPERATURE_PEAK 0xdf
+#define LTC2978_MFR_SPECIAL_ID 0xe7
+
+/* LTC2978 only */
+#define LTC2978_MFR_VOUT_MIN 0xfb
+#define LTC2978_MFR_VIN_MIN 0xfc
+#define LTC2978_MFR_TEMPERATURE_MIN 0xfd
+
+/* LTC3880 only */
+#define LTC3880_MFR_IOUT_PEAK 0xd7
+#define LTC3880_MFR_CLEAR_PEAKS 0xe3
+#define LTC3880_MFR_TEMPERATURE2_PEAK 0xf4
+
+#define LTC2978_ID_REV1 0x0121
+#define LTC2978_ID_REV2 0x0122
+#define LTC3880_ID 0x4000
+#define LTC3880_ID_MASK 0xff00
+
+/*
+ * LTC2978 clears peak data whenever the CLEAR_FAULTS command is executed, which
+ * happens pretty much each time chip data is updated. Raw peak data therefore
+ * does not provide much value. To be able to provide useful peak data, keep an
+ * internal cache of measured peak data, which is only cleared if an explicit
+ * "clear peak" command is executed for the sensor in question.
+ */
+struct ltc2978_data {
+ enum chips id;
+ int vin_min, vin_max;
+ int temp_min, temp_max;
+ int vout_min[8], vout_max[8];
+ int iout_max[2];
+ int temp2_max[2];
+ struct pmbus_driver_info info;
+};
+
+#define to_ltc2978_data(x) container_of(x, struct ltc2978_data, info)
+
+static inline int lin11_to_val(int data)
+{
+ s16 e = ((s16)data) >> 11;
+ s32 m = (((s16)(data << 5)) >> 5);
+
+ /*
+ * mantissa is 10 bit + sign, exponent adds up to 15 bit.
+ * Add 6 bit to exponent for maximum accuracy (10 + 15 + 6 = 31).
+ */
+ e += 6;
+ return (e < 0 ? m >> -e : m << e);
+}
+
+static int ltc2978_read_word_data_common(struct i2c_client *client, int page,
+ int reg)
+{
+ const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
+ struct ltc2978_data *data = to_ltc2978_data(info);
+ int ret;
+
+ switch (reg) {
+ case PMBUS_VIRT_READ_VIN_MAX:
+ ret = pmbus_read_word_data(client, page, LTC2978_MFR_VIN_PEAK);
+ if (ret >= 0) {
+ if (lin11_to_val(ret) > lin11_to_val(data->vin_max))
+ data->vin_max = ret;
+ ret = data->vin_max;
+ }
+ break;
+ case PMBUS_VIRT_READ_VOUT_MAX:
+ ret = pmbus_read_word_data(client, page, LTC2978_MFR_VOUT_PEAK);
+ if (ret >= 0) {
+ /*
+ * VOUT is 16 bit unsigned with fixed exponent,
+ * so we can compare it directly
+ */
+ if (ret > data->vout_max[page])
+ data->vout_max[page] = ret;
+ ret = data->vout_max[page];
+ }
+ break;
+ case PMBUS_VIRT_READ_TEMP_MAX:
+ ret = pmbus_read_word_data(client, page,
+ LTC2978_MFR_TEMPERATURE_PEAK);
+ if (ret >= 0) {
+ if (lin11_to_val(ret) > lin11_to_val(data->temp_max))
+ data->temp_max = ret;
+ ret = data->temp_max;
+ }
+ break;
+ case PMBUS_VIRT_RESET_VOUT_HISTORY:
+ case PMBUS_VIRT_RESET_VIN_HISTORY:
+ case PMBUS_VIRT_RESET_TEMP_HISTORY:
+ ret = 0;
+ break;
+ default:
+ ret = -ENODATA;
+ break;
+ }
+ return ret;
+}
+
+static int ltc2978_read_word_data(struct i2c_client *client, int page, int reg)
+{
+ const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
+ struct ltc2978_data *data = to_ltc2978_data(info);
+ int ret;
+
+ switch (reg) {
+ case PMBUS_VIRT_READ_VIN_MIN:
+ ret = pmbus_read_word_data(client, page, LTC2978_MFR_VIN_MIN);
+ if (ret >= 0) {
+ if (lin11_to_val(ret) < lin11_to_val(data->vin_min))
+ data->vin_min = ret;
+ ret = data->vin_min;
+ }
+ break;
+ case PMBUS_VIRT_READ_VOUT_MIN:
+ ret = pmbus_read_word_data(client, page, LTC2978_MFR_VOUT_MIN);
+ if (ret >= 0) {
+ /*
+ * VOUT_MIN is known to not be supported on some lots
+ * of LTC2978 revision 1, and will return the maximum
+ * possible voltage if read. If VOUT_MAX is valid and
+ * lower than the reading of VOUT_MIN, use it instead.
+ */
+ if (data->vout_max[page] && ret > data->vout_max[page])
+ ret = data->vout_max[page];
+ if (ret < data->vout_min[page])
+ data->vout_min[page] = ret;
+ ret = data->vout_min[page];
+ }
+ break;
+ case PMBUS_VIRT_READ_TEMP_MIN:
+ ret = pmbus_read_word_data(client, page,
+ LTC2978_MFR_TEMPERATURE_MIN);
+ if (ret >= 0) {
+ if (lin11_to_val(ret)
+ < lin11_to_val(data->temp_min))
+ data->temp_min = ret;
+ ret = data->temp_min;
+ }
+ break;
+ case PMBUS_VIRT_READ_IOUT_MAX:
+ case PMBUS_VIRT_RESET_IOUT_HISTORY:
+ case PMBUS_VIRT_READ_TEMP2_MAX:
+ case PMBUS_VIRT_RESET_TEMP2_HISTORY:
+ ret = -ENXIO;
+ break;
+ default:
+ ret = ltc2978_read_word_data_common(client, page, reg);
+ break;
+ }
+ return ret;
+}
+
+static int ltc3880_read_word_data(struct i2c_client *client, int page, int reg)
+{
+ const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
+ struct ltc2978_data *data = to_ltc2978_data(info);
+ int ret;
+
+ switch (reg) {
+ case PMBUS_VIRT_READ_IOUT_MAX:
+ ret = pmbus_read_word_data(client, page, LTC3880_MFR_IOUT_PEAK);
+ if (ret >= 0) {
+ if (lin11_to_val(ret)
+ > lin11_to_val(data->iout_max[page]))
+ data->iout_max[page] = ret;
+ ret = data->iout_max[page];
+ }
+ break;
+ case PMBUS_VIRT_READ_TEMP2_MAX:
+ ret = pmbus_read_word_data(client, page,
+ LTC3880_MFR_TEMPERATURE2_PEAK);
+ if (ret >= 0) {
+ if (lin11_to_val(ret)
+ > lin11_to_val(data->temp2_max[page]))
+ data->temp2_max[page] = ret;
+ ret = data->temp2_max[page];
+ }
+ break;
+ case PMBUS_VIRT_READ_VIN_MIN:
+ case PMBUS_VIRT_READ_VOUT_MIN:
+ case PMBUS_VIRT_READ_TEMP_MIN:
+ ret = -ENXIO;
+ break;
+ case PMBUS_VIRT_RESET_IOUT_HISTORY:
+ case PMBUS_VIRT_RESET_TEMP2_HISTORY:
+ ret = 0;
+ break;
+ default:
+ ret = ltc2978_read_word_data_common(client, page, reg);
+ break;
+ }
+ return ret;
+}
+
+static int ltc2978_clear_peaks(struct i2c_client *client, int page,
+ enum chips id)
+{
+ int ret;
+
+ if (id == ltc2978)
+ ret = pmbus_write_byte(client, page, PMBUS_CLEAR_FAULTS);
+ else
+ ret = pmbus_write_byte(client, 0, LTC3880_MFR_CLEAR_PEAKS);
+
+ return ret;
+}
+
+static int ltc2978_write_word_data(struct i2c_client *client, int page,
+ int reg, u16 word)
+{
+ const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
+ struct ltc2978_data *data = to_ltc2978_data(info);
+ int ret;
+
+ switch (reg) {
+ case PMBUS_VIRT_RESET_IOUT_HISTORY:
+ data->iout_max[page] = 0x7fff;
+ ret = ltc2978_clear_peaks(client, page, data->id);
+ break;
+ case PMBUS_VIRT_RESET_TEMP2_HISTORY:
+ data->temp2_max[page] = 0x7fff;
+ ret = ltc2978_clear_peaks(client, page, data->id);
+ break;
+ case PMBUS_VIRT_RESET_VOUT_HISTORY:
+ data->vout_min[page] = 0xffff;
+ data->vout_max[page] = 0;
+ ret = ltc2978_clear_peaks(client, page, data->id);
+ break;
+ case PMBUS_VIRT_RESET_VIN_HISTORY:
+ data->vin_min = 0x7bff;
+ data->vin_max = 0;
+ ret = ltc2978_clear_peaks(client, page, data->id);
+ break;
+ case PMBUS_VIRT_RESET_TEMP_HISTORY:
+ data->temp_min = 0x7bff;
+ data->temp_max = 0x7fff;
+ ret = ltc2978_clear_peaks(client, page, data->id);
+ break;
+ default:
+ ret = -ENODATA;
+ break;
+ }
+ return ret;
+}
+
+static const struct i2c_device_id ltc2978_id[] = {
+ {"ltc2978", ltc2978},
+ {"ltc3880", ltc3880},
+ {}
+};
+MODULE_DEVICE_TABLE(i2c, ltc2978_id);
+
+static int ltc2978_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ int chip_id, ret, i;
+ struct ltc2978_data *data;
+ struct pmbus_driver_info *info;
+
+ if (!i2c_check_functionality(client->adapter,
+ I2C_FUNC_SMBUS_READ_WORD_DATA))
+ return -ENODEV;
+
+ data = kzalloc(sizeof(struct ltc2978_data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ chip_id = i2c_smbus_read_word_data(client, LTC2978_MFR_SPECIAL_ID);
+ if (chip_id < 0) {
+ ret = chip_id;
+ goto err_mem;
+ }
+
+ if (chip_id == LTC2978_ID_REV1 || chip_id == LTC2978_ID_REV2) {
+ data->id = ltc2978;
+ } else if ((chip_id & LTC3880_ID_MASK) == LTC3880_ID) {
+ data->id = ltc3880;
+ } else {
+ dev_err(&client->dev, "Unsupported chip ID 0x%x\n", chip_id);
+ ret = -ENODEV;
+ goto err_mem;
+ }
+ if (data->id != id->driver_data)
+ dev_warn(&client->dev,
+ "Device mismatch: Configured %s, detected %s\n",
+ id->name,
+ ltc2978_id[data->id].name);
+
+ info = &data->info;
+ info->write_word_data = ltc2978_write_word_data;
+
+ data->vout_min[0] = 0xffff;
+ data->vin_min = 0x7bff;
+ data->temp_min = 0x7bff;
+ data->temp_max = 0x7fff;
+
+ switch (id->driver_data) {
+ case ltc2978:
+ info->read_word_data = ltc2978_read_word_data;
+ info->pages = 8;
+ info->func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_STATUS_INPUT
+ | PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
+ | PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP;
+ for (i = 1; i < 8; i++) {
+ info->func[i] = PMBUS_HAVE_VOUT
+ | PMBUS_HAVE_STATUS_VOUT;
+ data->vout_min[i] = 0xffff;
+ }
+ break;
+ case ltc3880:
+ info->read_word_data = ltc3880_read_word_data;
+ info->pages = 2;
+ info->func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_IIN
+ | PMBUS_HAVE_STATUS_INPUT
+ | PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
+ | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT
+ | PMBUS_HAVE_POUT | PMBUS_HAVE_TEMP
+ | PMBUS_HAVE_TEMP2 | PMBUS_HAVE_STATUS_TEMP;
+ info->func[1] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
+ | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT
+ | PMBUS_HAVE_POUT
+ | PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP;
+ data->vout_min[1] = 0xffff;
+ break;
+ default:
+ ret = -ENODEV;
+ goto err_mem;
+ }
+
+ ret = pmbus_do_probe(client, id, info);
+ if (ret)
+ goto err_mem;
+ return 0;
+
+err_mem:
+ kfree(data);
+ return ret;
+}
+
+static int ltc2978_remove(struct i2c_client *client)
+{
+ const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
+ const struct ltc2978_data *data = to_ltc2978_data(info);
+
+ pmbus_do_remove(client);
+ kfree(data);
+ return 0;
+}
+
+/* This is the driver that will be inserted */
+static struct i2c_driver ltc2978_driver = {
+ .driver = {
+ .name = "ltc2978",
+ },
+ .probe = ltc2978_probe,
+ .remove = ltc2978_remove,
+ .id_table = ltc2978_id,
+};
+
+static int __init ltc2978_init(void)
+{
+ return i2c_add_driver(&ltc2978_driver);
+}
+
+static void __exit ltc2978_exit(void)
+{
+ i2c_del_driver(&ltc2978_driver);
+}
+
+MODULE_AUTHOR("Guenter Roeck");
+MODULE_DESCRIPTION("PMBus driver for LTC2978 and LTC3880");
+MODULE_LICENSE("GPL");
+module_init(ltc2978_init);
+module_exit(ltc2978_exit);
diff --git a/drivers/hwmon/pmbus/max16064.c b/drivers/hwmon/pmbus/max16064.c
index e50b296e8db..1d77cf4d2d4 100644
--- a/drivers/hwmon/pmbus/max16064.c
+++ b/drivers/hwmon/pmbus/max16064.c
@@ -105,7 +105,8 @@ static int max16064_probe(struct i2c_client *client,
static int max16064_remove(struct i2c_client *client)
{
- return pmbus_do_remove(client);
+ pmbus_do_remove(client);
+ return 0;
}
static const struct i2c_device_id max16064_id[] = {
diff --git a/drivers/hwmon/pmbus/max34440.c b/drivers/hwmon/pmbus/max34440.c
index fda621d2e45..beaf5a8d9c4 100644
--- a/drivers/hwmon/pmbus/max34440.c
+++ b/drivers/hwmon/pmbus/max34440.c
@@ -93,12 +93,14 @@ static int max34440_write_word_data(struct i2c_client *client, int page,
static int max34440_read_byte_data(struct i2c_client *client, int page, int reg)
{
- int ret;
+ int ret = 0;
int mfg_status;
- ret = pmbus_set_page(client, page);
- if (ret < 0)
- return ret;
+ if (page >= 0) {
+ ret = pmbus_set_page(client, page);
+ if (ret < 0)
+ return ret;
+ }
switch (reg) {
case PMBUS_STATUS_IOUT:
@@ -224,7 +226,8 @@ static int max34440_probe(struct i2c_client *client,
static int max34440_remove(struct i2c_client *client)
{
- return pmbus_do_remove(client);
+ pmbus_do_remove(client);
+ return 0;
}
static const struct i2c_device_id max34440_id[] = {
diff --git a/drivers/hwmon/pmbus/max8688.c b/drivers/hwmon/pmbus/max8688.c
index c3e72f1a3cf..e2b74bb399b 100644
--- a/drivers/hwmon/pmbus/max8688.c
+++ b/drivers/hwmon/pmbus/max8688.c
@@ -45,7 +45,7 @@ static int max8688_read_word_data(struct i2c_client *client, int page, int reg)
int ret;
if (page)
- return -EINVAL;
+ return -ENXIO;
switch (reg) {
case PMBUS_VIRT_READ_VOUT_MAX:
@@ -101,8 +101,8 @@ static int max8688_read_byte_data(struct i2c_client *client, int page, int reg)
int ret = 0;
int mfg_status;
- if (page)
- return -EINVAL;
+ if (page > 0)
+ return -ENXIO;
switch (reg) {
case PMBUS_STATUS_VOUT:
@@ -182,7 +182,8 @@ static int max8688_probe(struct i2c_client *client,
static int max8688_remove(struct i2c_client *client)
{
- return pmbus_do_remove(client);
+ pmbus_do_remove(client);
+ return 0;
}
static const struct i2c_device_id max8688_id[] = {
diff --git a/drivers/hwmon/pmbus/pmbus.c b/drivers/hwmon/pmbus/pmbus.c
index 73de9f1f319..995e873197e 100644
--- a/drivers/hwmon/pmbus/pmbus.c
+++ b/drivers/hwmon/pmbus/pmbus.c
@@ -187,13 +187,12 @@ out:
static int pmbus_remove(struct i2c_client *client)
{
- int ret;
const struct pmbus_driver_info *info;
info = pmbus_get_driver_info(client);
- ret = pmbus_do_remove(client);
+ pmbus_do_remove(client);
kfree(info);
- return ret;
+ return 0;
}
/*
@@ -205,10 +204,13 @@ static const struct i2c_device_id pmbus_id[] = {
{"bmr451", 1},
{"bmr453", 1},
{"bmr454", 1},
- {"ltc2978", 8},
{"ncp4200", 1},
{"ncp4208", 1},
+ {"pdt003", 1},
+ {"pdt006", 1},
+ {"pdt012", 1},
{"pmbus", 0},
+ {"udt020", 1},
{}
};
diff --git a/drivers/hwmon/pmbus/pmbus.h b/drivers/hwmon/pmbus/pmbus.h
index a6ae20ffef6..5d31d1c2c0f 100644
--- a/drivers/hwmon/pmbus/pmbus.h
+++ b/drivers/hwmon/pmbus/pmbus.h
@@ -134,8 +134,16 @@
* Semantics:
* Virtual registers are all word size.
* READ registers are read-only; writes are either ignored or return an error.
- * RESET registers are read/write. Reading returns zero (used for detection),
- * writing any value causes the associated history to be reset.
+ * RESET registers are read/write. Reading reset registers returns zero
+ * (used for detection), writing any value causes the associated history to be
+ * reset.
+ * Virtual registers have to be handled in device specific driver code. Chip
+ * driver code returns non-negative register values if a virtual register is
+ * supported, or a negative error code if not. The chip driver may return
+ * -ENODATA or any other error code in this case, though an error code other
+ * than -ENODATA is handled more efficiently and thus preferred. Either case,
+ * the calling PMBus core code will abort if the chip driver returns an error
+ * code when reading or writing virtual registers.
*/
#define PMBUS_VIRT_BASE 0x100
#define PMBUS_VIRT_READ_TEMP_MIN (PMBUS_VIRT_BASE + 0)
@@ -160,6 +168,9 @@
#define PMBUS_VIRT_READ_IOUT_MIN (PMBUS_VIRT_BASE + 19)
#define PMBUS_VIRT_READ_IOUT_MAX (PMBUS_VIRT_BASE + 20)
#define PMBUS_VIRT_RESET_IOUT_HISTORY (PMBUS_VIRT_BASE + 21)
+#define PMBUS_VIRT_READ_TEMP2_MIN (PMBUS_VIRT_BASE + 22)
+#define PMBUS_VIRT_READ_TEMP2_MAX (PMBUS_VIRT_BASE + 23)
+#define PMBUS_VIRT_RESET_TEMP2_HISTORY (PMBUS_VIRT_BASE + 24)
/*
* CAPABILITY
@@ -320,6 +331,12 @@ struct pmbus_driver_info {
* The following functions map manufacturing specific register values
* to PMBus standard register values. Specify only if mapping is
* necessary.
+ * Functions return the register value (read) or zero (write) if
+ * successful. A return value of -ENODATA indicates that there is no
+ * manufacturer specific register, but that a standard PMBus register
+ * may exist. Any other negative return value indicates that the
+ * register does not exist, and that no attempt should be made to read
+ * the standard register.
*/
int (*read_byte_data)(struct i2c_client *client, int page, int reg);
int (*read_word_data)(struct i2c_client *client, int page, int reg);
@@ -347,7 +364,7 @@ bool pmbus_check_byte_register(struct i2c_client *client, int page, int reg);
bool pmbus_check_word_register(struct i2c_client *client, int page, int reg);
int pmbus_do_probe(struct i2c_client *client, const struct i2c_device_id *id,
struct pmbus_driver_info *info);
-int pmbus_do_remove(struct i2c_client *client);
+void pmbus_do_remove(struct i2c_client *client);
const struct pmbus_driver_info *pmbus_get_driver_info(struct i2c_client
*client);
diff --git a/drivers/hwmon/pmbus/pmbus_core.c b/drivers/hwmon/pmbus/pmbus_core.c
index 397fc59b568..00460d8d842 100644
--- a/drivers/hwmon/pmbus/pmbus_core.c
+++ b/drivers/hwmon/pmbus/pmbus_core.c
@@ -160,7 +160,7 @@ int pmbus_set_page(struct i2c_client *client, u8 page)
rv = i2c_smbus_write_byte_data(client, PMBUS_PAGE, page);
newpage = i2c_smbus_read_byte_data(client, PMBUS_PAGE);
if (newpage != page)
- rv = -EINVAL;
+ rv = -EIO;
else
data->currpage = page;
}
@@ -229,7 +229,7 @@ static int _pmbus_write_word_data(struct i2c_client *client, int page, int reg,
return status;
}
if (reg >= PMBUS_VIRT_BASE)
- return -EINVAL;
+ return -ENXIO;
return pmbus_write_word_data(client, page, reg, word);
}
@@ -261,7 +261,7 @@ static int _pmbus_read_word_data(struct i2c_client *client, int page, int reg)
return status;
}
if (reg >= PMBUS_VIRT_BASE)
- return -EINVAL;
+ return -ENXIO;
return pmbus_read_word_data(client, page, reg);
}
@@ -316,11 +316,11 @@ static int pmbus_check_status_cml(struct i2c_client *client)
{
int status, status2;
- status = pmbus_read_byte_data(client, -1, PMBUS_STATUS_BYTE);
+ status = _pmbus_read_byte_data(client, -1, PMBUS_STATUS_BYTE);
if (status < 0 || (status & PB_STATUS_CML)) {
- status2 = pmbus_read_byte_data(client, -1, PMBUS_STATUS_CML);
+ status2 = _pmbus_read_byte_data(client, -1, PMBUS_STATUS_CML);
if (status2 < 0 || (status2 & PB_CML_FAULT_INVALID_COMMAND))
- return -EINVAL;
+ return -EIO;
}
return 0;
}
@@ -371,8 +371,8 @@ static struct pmbus_data *pmbus_update_device(struct device *dev)
for (i = 0; i < info->pages; i++)
data->status[PB_STATUS_BASE + i]
- = pmbus_read_byte_data(client, i,
- PMBUS_STATUS_BYTE);
+ = _pmbus_read_byte_data(client, i,
+ PMBUS_STATUS_BYTE);
for (i = 0; i < info->pages; i++) {
if (!(info->func[i] & PMBUS_HAVE_STATUS_VOUT))
continue;
@@ -445,13 +445,8 @@ static long pmbus_reg2data_linear(struct pmbus_data *data,
exponent = data->exponent;
mantissa = (u16) sensor->data;
} else { /* LINEAR11 */
- exponent = (sensor->data >> 11) & 0x001f;
- mantissa = sensor->data & 0x07ff;
-
- if (exponent > 0x0f)
- exponent |= 0xffe0; /* sign extend exponent */
- if (mantissa > 0x03ff)
- mantissa |= 0xfffff800; /* sign extend mantissa */
+ exponent = ((s16)sensor->data) >> 11;
+ mantissa = ((s16)((sensor->data & 0x7ff) << 5)) >> 5;
}
val = mantissa;
@@ -1401,7 +1396,42 @@ static const struct pmbus_limit_attr temp_limit_attrs[] = {
}
};
-static const struct pmbus_limit_attr temp_limit_attrs23[] = {
+static const struct pmbus_limit_attr temp_limit_attrs2[] = {
+ {
+ .reg = PMBUS_UT_WARN_LIMIT,
+ .low = true,
+ .attr = "min",
+ .alarm = "min_alarm",
+ .sbit = PB_TEMP_UT_WARNING,
+ }, {
+ .reg = PMBUS_UT_FAULT_LIMIT,
+ .low = true,
+ .attr = "lcrit",
+ .alarm = "lcrit_alarm",
+ .sbit = PB_TEMP_UT_FAULT,
+ }, {
+ .reg = PMBUS_OT_WARN_LIMIT,
+ .attr = "max",
+ .alarm = "max_alarm",
+ .sbit = PB_TEMP_OT_WARNING,
+ }, {
+ .reg = PMBUS_OT_FAULT_LIMIT,
+ .attr = "crit",
+ .alarm = "crit_alarm",
+ .sbit = PB_TEMP_OT_FAULT,
+ }, {
+ .reg = PMBUS_VIRT_READ_TEMP2_MIN,
+ .attr = "lowest",
+ }, {
+ .reg = PMBUS_VIRT_READ_TEMP2_MAX,
+ .attr = "highest",
+ }, {
+ .reg = PMBUS_VIRT_RESET_TEMP2_HISTORY,
+ .attr = "reset_history",
+ }
+};
+
+static const struct pmbus_limit_attr temp_limit_attrs3[] = {
{
.reg = PMBUS_UT_WARN_LIMIT,
.low = true,
@@ -1450,8 +1480,8 @@ static const struct pmbus_sensor_attr temp_attributes[] = {
.sfunc = PMBUS_HAVE_STATUS_TEMP,
.sbase = PB_STATUS_TEMP_BASE,
.gbit = PB_STATUS_TEMPERATURE,
- .limit = temp_limit_attrs23,
- .nlimit = ARRAY_SIZE(temp_limit_attrs23),
+ .limit = temp_limit_attrs2,
+ .nlimit = ARRAY_SIZE(temp_limit_attrs2),
}, {
.reg = PMBUS_READ_TEMPERATURE_3,
.class = PSC_TEMPERATURE,
@@ -1462,8 +1492,8 @@ static const struct pmbus_sensor_attr temp_attributes[] = {
.sfunc = PMBUS_HAVE_STATUS_TEMP,
.sbase = PB_STATUS_TEMP_BASE,
.gbit = PB_STATUS_TEMPERATURE,
- .limit = temp_limit_attrs23,
- .nlimit = ARRAY_SIZE(temp_limit_attrs23),
+ .limit = temp_limit_attrs3,
+ .nlimit = ARRAY_SIZE(temp_limit_attrs3),
}
};
@@ -1593,10 +1623,10 @@ static void pmbus_find_attributes(struct i2c_client *client,
static int pmbus_identify_common(struct i2c_client *client,
struct pmbus_data *data)
{
- int vout_mode = -1, exponent;
+ int vout_mode = -1;
if (pmbus_check_byte_register(client, 0, PMBUS_VOUT_MODE))
- vout_mode = pmbus_read_byte_data(client, 0, PMBUS_VOUT_MODE);
+ vout_mode = _pmbus_read_byte_data(client, 0, PMBUS_VOUT_MODE);
if (vout_mode >= 0 && vout_mode != 0xff) {
/*
* Not all chips support the VOUT_MODE command,
@@ -1607,11 +1637,7 @@ static int pmbus_identify_common(struct i2c_client *client,
if (data->info->format[PSC_VOLTAGE_OUT] != linear)
return -ENODEV;
- exponent = vout_mode & 0x1f;
- /* and sign-extend it */
- if (exponent & 0x10)
- exponent |= ~0x1f;
- data->exponent = exponent;
+ data->exponent = ((s8)(vout_mode << 3)) >> 3;
break;
case 1: /* VID mode */
if (data->info->format[PSC_VOLTAGE_OUT] != vid)
@@ -1682,7 +1708,7 @@ int pmbus_do_probe(struct i2c_client *client, const struct i2c_device_id *id,
if (info->pages <= 0 || info->pages > PMBUS_PAGES) {
dev_err(&client->dev, "Bad number of PMBus pages: %d\n",
info->pages);
- ret = -EINVAL;
+ ret = -ENODEV;
goto out_data;
}
@@ -1764,7 +1790,7 @@ out_data:
}
EXPORT_SYMBOL_GPL(pmbus_do_probe);
-int pmbus_do_remove(struct i2c_client *client)
+void pmbus_do_remove(struct i2c_client *client)
{
struct pmbus_data *data = i2c_get_clientdata(client);
hwmon_device_unregister(data->hwmon_dev);
@@ -1774,7 +1800,6 @@ int pmbus_do_remove(struct i2c_client *client)
kfree(data->booleans);
kfree(data->sensors);
kfree(data);
- return 0;
}
EXPORT_SYMBOL_GPL(pmbus_do_remove);
diff --git a/drivers/hwmon/pmbus/ucd9000.c b/drivers/hwmon/pmbus/ucd9000.c
index d0ddb60155c..4ff6cf289f8 100644
--- a/drivers/hwmon/pmbus/ucd9000.c
+++ b/drivers/hwmon/pmbus/ucd9000.c
@@ -74,8 +74,8 @@ static int ucd9000_read_byte_data(struct i2c_client *client, int page, int reg)
switch (reg) {
case PMBUS_FAN_CONFIG_12:
- if (page)
- return -EINVAL;
+ if (page > 0)
+ return -ENXIO;
ret = ucd9000_get_fan_config(client, 0);
if (ret < 0)
@@ -88,8 +88,8 @@ static int ucd9000_read_byte_data(struct i2c_client *client, int page, int reg)
ret = fan_config;
break;
case PMBUS_FAN_CONFIG_34:
- if (page)
- return -EINVAL;
+ if (page > 0)
+ return -ENXIO;
ret = ucd9000_get_fan_config(client, 2);
if (ret < 0)
@@ -239,13 +239,12 @@ out:
static int ucd9000_remove(struct i2c_client *client)
{
- int ret;
struct ucd9000_data *data;
data = to_ucd9000_data(pmbus_get_driver_info(client));
- ret = pmbus_do_remove(client);
+ pmbus_do_remove(client);
kfree(data);
- return ret;
+ return 0;
}
diff --git a/drivers/hwmon/pmbus/ucd9200.c b/drivers/hwmon/pmbus/ucd9200.c
index c65e9da707c..6e1c1a80ab8 100644
--- a/drivers/hwmon/pmbus/ucd9200.c
+++ b/drivers/hwmon/pmbus/ucd9200.c
@@ -171,13 +171,12 @@ out:
static int ucd9200_remove(struct i2c_client *client)
{
- int ret;
const struct pmbus_driver_info *info;
info = pmbus_get_driver_info(client);
- ret = pmbus_do_remove(client);
+ pmbus_do_remove(client);
kfree(info);
- return ret;
+ return 0;
}
diff --git a/drivers/hwmon/pmbus/zl6100.c b/drivers/hwmon/pmbus/zl6100.c
new file mode 100644
index 00000000000..2bc980006f8
--- /dev/null
+++ b/drivers/hwmon/pmbus/zl6100.c
@@ -0,0 +1,256 @@
+/*
+ * Hardware monitoring driver for ZL6100 and compatibles
+ *
+ * Copyright (c) 2011 Ericsson AB.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/ktime.h>
+#include <linux/delay.h>
+#include "pmbus.h"
+
+enum chips { zl2004, zl2006, zl2008, zl2105, zl2106, zl6100, zl6105 };
+
+struct zl6100_data {
+ int id;
+ ktime_t access; /* chip access time */
+ struct pmbus_driver_info info;
+};
+
+#define to_zl6100_data(x) container_of(x, struct zl6100_data, info)
+
+#define ZL6100_DEVICE_ID 0xe4
+
+#define ZL6100_WAIT_TIME 1000 /* uS */
+
+static ushort delay = ZL6100_WAIT_TIME;
+module_param(delay, ushort, 0644);
+MODULE_PARM_DESC(delay, "Delay between chip accesses in uS");
+
+/* Some chips need a delay between accesses */
+static inline void zl6100_wait(const struct zl6100_data *data)
+{
+ if (delay) {
+ s64 delta = ktime_us_delta(ktime_get(), data->access);
+ if (delta < delay)
+ udelay(delay - delta);
+ }
+}
+
+static int zl6100_read_word_data(struct i2c_client *client, int page, int reg)
+{
+ const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
+ struct zl6100_data *data = to_zl6100_data(info);
+ int ret;
+
+ if (page || reg >= PMBUS_VIRT_BASE)
+ return -ENXIO;
+
+ zl6100_wait(data);
+ ret = pmbus_read_word_data(client, page, reg);
+ data->access = ktime_get();
+
+ return ret;
+}
+
+static int zl6100_read_byte_data(struct i2c_client *client, int page, int reg)
+{
+ const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
+ struct zl6100_data *data = to_zl6100_data(info);
+ int ret;
+
+ if (page > 0)
+ return -ENXIO;
+
+ zl6100_wait(data);
+ ret = pmbus_read_byte_data(client, page, reg);
+ data->access = ktime_get();
+
+ return ret;
+}
+
+static int zl6100_write_word_data(struct i2c_client *client, int page, int reg,
+ u16 word)
+{
+ const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
+ struct zl6100_data *data = to_zl6100_data(info);
+ int ret;
+
+ if (page || reg >= PMBUS_VIRT_BASE)
+ return -ENXIO;
+
+ zl6100_wait(data);
+ ret = pmbus_write_word_data(client, page, reg, word);
+ data->access = ktime_get();
+
+ return ret;
+}
+
+static int zl6100_write_byte(struct i2c_client *client, int page, u8 value)
+{
+ const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
+ struct zl6100_data *data = to_zl6100_data(info);
+ int ret;
+
+ if (page > 0)
+ return -ENXIO;
+
+ zl6100_wait(data);
+ ret = pmbus_write_byte(client, page, value);
+ data->access = ktime_get();
+
+ return ret;
+}
+
+static const struct i2c_device_id zl6100_id[] = {
+ {"zl2004", zl2004},
+ {"zl2006", zl2006},
+ {"zl2008", zl2008},
+ {"zl2105", zl2105},
+ {"zl2106", zl2106},
+ {"zl6100", zl6100},
+ {"zl6105", zl6105},
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, zl6100_id);
+
+static int zl6100_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ int ret;
+ struct zl6100_data *data;
+ struct pmbus_driver_info *info;
+ u8 device_id[I2C_SMBUS_BLOCK_MAX + 1];
+ const struct i2c_device_id *mid;
+
+ if (!i2c_check_functionality(client->adapter,
+ I2C_FUNC_SMBUS_READ_BYTE_DATA
+ | I2C_FUNC_SMBUS_READ_BLOCK_DATA))
+ return -ENODEV;
+
+ ret = i2c_smbus_read_block_data(client, ZL6100_DEVICE_ID,
+ device_id);
+ if (ret < 0) {
+ dev_err(&client->dev, "Failed to read device ID\n");
+ return ret;
+ }
+ device_id[ret] = '\0';
+ dev_info(&client->dev, "Device ID %s\n", device_id);
+
+ mid = NULL;
+ for (mid = zl6100_id; mid->name[0]; mid++) {
+ if (!strncasecmp(mid->name, device_id, strlen(mid->name)))
+ break;
+ }
+ if (!mid->name[0]) {
+ dev_err(&client->dev, "Unsupported device\n");
+ return -ENODEV;
+ }
+ if (id->driver_data != mid->driver_data)
+ dev_notice(&client->dev,
+ "Device mismatch: Configured %s, detected %s\n",
+ id->name, mid->name);
+
+ data = kzalloc(sizeof(struct zl6100_data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ data->id = mid->driver_data;
+
+ /*
+ * ZL2008, ZL2105, and ZL6100 are known to require a wait time
+ * between I2C accesses. ZL2004 and ZL6105 are known to be safe.
+ *
+ * Only clear the wait time for chips known to be safe. The wait time
+ * can be cleared later for additional chips if tests show that it
+ * is not needed (in other words, better be safe than sorry).
+ */
+ if (data->id == zl2004 || data->id == zl6105)
+ delay = 0;
+
+ /*
+ * Since there was a direct I2C device access above, wait before
+ * accessing the chip again.
+ * Set the timestamp, wait, then set it again. This should provide
+ * enough buffer time to be safe.
+ */
+ data->access = ktime_get();
+ zl6100_wait(data);
+ data->access = ktime_get();
+
+ info = &data->info;
+
+ info->pages = 1;
+ info->func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_STATUS_INPUT
+ | PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
+ | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT
+ | PMBUS_HAVE_TEMP | PMBUS_HAVE_TEMP2 | PMBUS_HAVE_STATUS_TEMP;
+
+ info->read_word_data = zl6100_read_word_data;
+ info->read_byte_data = zl6100_read_byte_data;
+ info->write_word_data = zl6100_write_word_data;
+ info->write_byte = zl6100_write_byte;
+
+ ret = pmbus_do_probe(client, mid, info);
+ if (ret)
+ goto err_mem;
+ return 0;
+
+err_mem:
+ kfree(data);
+ return ret;
+}
+
+static int zl6100_remove(struct i2c_client *client)
+{
+ const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
+ const struct zl6100_data *data = to_zl6100_data(info);
+
+ pmbus_do_remove(client);
+ kfree(data);
+ return 0;
+}
+
+static struct i2c_driver zl6100_driver = {
+ .driver = {
+ .name = "zl6100",
+ },
+ .probe = zl6100_probe,
+ .remove = zl6100_remove,
+ .id_table = zl6100_id,
+};
+
+static int __init zl6100_init(void)
+{
+ return i2c_add_driver(&zl6100_driver);
+}
+
+static void __exit zl6100_exit(void)
+{
+ i2c_del_driver(&zl6100_driver);
+}
+
+MODULE_AUTHOR("Guenter Roeck");
+MODULE_DESCRIPTION("PMBus driver for ZL6100 and compatibles");
+MODULE_LICENSE("GPL");
+module_init(zl6100_init);
+module_exit(zl6100_exit);
diff --git a/drivers/hwmon/w83627ehf.c b/drivers/hwmon/w83627ehf.c
index 36d7f270b14..98aab4bea34 100644
--- a/drivers/hwmon/w83627ehf.c
+++ b/drivers/hwmon/w83627ehf.c
@@ -197,6 +197,9 @@ static const u16 W83627EHF_REG_TEMP_CONFIG[] = { 0, 0x152, 0x252, 0 };
#define W83627EHF_REG_ALARM2 0x45A
#define W83627EHF_REG_ALARM3 0x45B
+#define W83627EHF_REG_CASEOPEN_DET 0x42 /* SMI STATUS #2 */
+#define W83627EHF_REG_CASEOPEN_CLR 0x46 /* SMI MASK #3 */
+
/* SmartFan registers */
#define W83627EHF_REG_FAN_STEPUP_TIME 0x0f
#define W83627EHF_REG_FAN_STEPDOWN_TIME 0x0e
@@ -316,7 +319,7 @@ static const char *const nct6776_temp_label[] = {
#define NUM_REG_TEMP ARRAY_SIZE(NCT6775_REG_TEMP)
-static inline int is_word_sized(u16 reg)
+static int is_word_sized(u16 reg)
{
return ((((reg & 0xff00) == 0x100
|| (reg & 0xff00) == 0x200)
@@ -385,23 +388,6 @@ div_from_reg(u8 reg)
return 1 << reg;
}
-static inline int
-temp_from_reg(u16 reg, s16 regval)
-{
- if (is_word_sized(reg))
- return LM75_TEMP_FROM_REG(regval);
- return ((s8)regval) * 1000;
-}
-
-static inline u16
-temp_to_reg(u16 reg, long temp)
-{
- if (is_word_sized(reg))
- return LM75_TEMP_TO_REG(temp);
- return (s8)DIV_ROUND_CLOSEST(SENSORS_LIMIT(temp, -127000, 128000),
- 1000);
-}
-
/* Some of analog inputs have internal scaling (2x), 8mV is ADC LSB */
static u8 scale_in[10] = { 8, 8, 16, 16, 8, 8, 8, 16, 16, 8 };
@@ -469,6 +455,7 @@ struct w83627ehf_data {
s16 temp_max[9];
s16 temp_max_hyst[9];
u32 alarms;
+ u8 caseopen;
u8 pwm_mode[4]; /* 0->DC variable voltage, 1->PWM variable duty cycle */
u8 pwm_enable[4]; /* 1->manual
@@ -557,6 +544,26 @@ static int w83627ehf_write_value(struct w83627ehf_data *data, u16 reg,
return 0;
}
+/* We left-align 8-bit temperature values to make the code simpler */
+static u16 w83627ehf_read_temp(struct w83627ehf_data *data, u16 reg)
+{
+ u16 res;
+
+ res = w83627ehf_read_value(data, reg);
+ if (!is_word_sized(reg))
+ res <<= 8;
+
+ return res;
+}
+
+static int w83627ehf_write_temp(struct w83627ehf_data *data, u16 reg,
+ u16 value)
+{
+ if (!is_word_sized(reg))
+ value >>= 8;
+ return w83627ehf_write_value(data, reg, value);
+}
+
/* This function assumes that the caller holds data->update_lock */
static void nct6775_write_fan_div(struct w83627ehf_data *data, int nr)
{
@@ -771,6 +778,9 @@ static struct w83627ehf_data *w83627ehf_update_device(struct device *dev)
/* Measured voltages and limits */
for (i = 0; i < data->in_num; i++) {
+ if ((i == 6) && data->in6_skip)
+ continue;
+
data->in[i] = w83627ehf_read_value(data,
W83627EHF_REG_IN(i));
data->in_min[i] = w83627ehf_read_value(data,
@@ -855,15 +865,15 @@ static struct w83627ehf_data *w83627ehf_update_device(struct device *dev)
for (i = 0; i < NUM_REG_TEMP; i++) {
if (!(data->have_temp & (1 << i)))
continue;
- data->temp[i] = w83627ehf_read_value(data,
+ data->temp[i] = w83627ehf_read_temp(data,
data->reg_temp[i]);
if (data->reg_temp_over[i])
data->temp_max[i]
- = w83627ehf_read_value(data,
+ = w83627ehf_read_temp(data,
data->reg_temp_over[i]);
if (data->reg_temp_hyst[i])
data->temp_max_hyst[i]
- = w83627ehf_read_value(data,
+ = w83627ehf_read_temp(data,
data->reg_temp_hyst[i]);
}
@@ -874,6 +884,9 @@ static struct w83627ehf_data *w83627ehf_update_device(struct device *dev)
(w83627ehf_read_value(data,
W83627EHF_REG_ALARM3) << 16);
+ data->caseopen = w83627ehf_read_value(data,
+ W83627EHF_REG_CASEOPEN_DET);
+
data->last_updated = jiffies;
data->valid = 1;
}
@@ -1156,8 +1169,7 @@ show_##reg(struct device *dev, struct device_attribute *attr, \
struct sensor_device_attribute *sensor_attr = \
to_sensor_dev_attr(attr); \
int nr = sensor_attr->index; \
- return sprintf(buf, "%d\n", \
- temp_from_reg(data->addr[nr], data->reg[nr])); \
+ return sprintf(buf, "%d\n", LM75_TEMP_FROM_REG(data->reg[nr])); \
}
show_temp_reg(reg_temp, temp);
show_temp_reg(reg_temp_over, temp_max);
@@ -1178,9 +1190,8 @@ store_##reg(struct device *dev, struct device_attribute *attr, \
if (err < 0) \
return err; \
mutex_lock(&data->update_lock); \
- data->reg[nr] = temp_to_reg(data->addr[nr], val); \
- w83627ehf_write_value(data, data->addr[nr], \
- data->reg[nr]); \
+ data->reg[nr] = LM75_TEMP_TO_REG(val); \
+ w83627ehf_write_temp(data, data->addr[nr], data->reg[nr]); \
mutex_unlock(&data->update_lock); \
return count; \
}
@@ -1655,6 +1666,48 @@ show_vid(struct device *dev, struct device_attribute *attr, char *buf)
}
static DEVICE_ATTR(cpu0_vid, S_IRUGO, show_vid, NULL);
+
+/* Case open detection */
+
+static ssize_t
+show_caseopen(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct w83627ehf_data *data = w83627ehf_update_device(dev);
+
+ return sprintf(buf, "%d\n",
+ !!(data->caseopen & to_sensor_dev_attr_2(attr)->index));
+}
+
+static ssize_t
+clear_caseopen(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct w83627ehf_data *data = dev_get_drvdata(dev);
+ unsigned long val;
+ u16 reg, mask;
+
+ if (strict_strtoul(buf, 10, &val) || val != 0)
+ return -EINVAL;
+
+ mask = to_sensor_dev_attr_2(attr)->nr;
+
+ mutex_lock(&data->update_lock);
+ reg = w83627ehf_read_value(data, W83627EHF_REG_CASEOPEN_CLR);
+ w83627ehf_write_value(data, W83627EHF_REG_CASEOPEN_CLR, reg | mask);
+ w83627ehf_write_value(data, W83627EHF_REG_CASEOPEN_CLR, reg & ~mask);
+ data->valid = 0; /* Force cache refresh */
+ mutex_unlock(&data->update_lock);
+
+ return count;
+}
+
+static struct sensor_device_attribute_2 sda_caseopen[] = {
+ SENSOR_ATTR_2(intrusion0_alarm, S_IWUSR | S_IRUGO, show_caseopen,
+ clear_caseopen, 0x80, 0x10),
+ SENSOR_ATTR_2(intrusion1_alarm, S_IWUSR | S_IRUGO, show_caseopen,
+ clear_caseopen, 0x40, 0x40),
+};
+
/*
* Driver and device management
*/
@@ -1711,6 +1764,9 @@ static void w83627ehf_device_remove_files(struct device *dev)
device_remove_file(dev, &sda_temp_type[i].dev_attr);
}
+ device_remove_file(dev, &sda_caseopen[0].dev_attr);
+ device_remove_file(dev, &sda_caseopen[1].dev_attr);
+
device_remove_file(dev, &dev_attr_name);
device_remove_file(dev, &dev_attr_cpu0_vid);
}
@@ -1789,13 +1845,78 @@ static void w82627ehf_swap_tempreg(struct w83627ehf_data *data,
data->reg_temp_config[r2] = tmp;
}
+static void __devinit
+w83627ehf_check_fan_inputs(const struct w83627ehf_sio_data *sio_data,
+ struct w83627ehf_data *data)
+{
+ int fan3pin, fan4pin, fan4min, fan5pin, regval;
+
+ superio_enter(sio_data->sioreg);
+
+ /* fan4 and fan5 share some pins with the GPIO and serial flash */
+ if (sio_data->kind == nct6775) {
+ /* On NCT6775, fan4 shares pins with the fdc interface */
+ fan3pin = 1;
+ fan4pin = !(superio_inb(sio_data->sioreg, 0x2A) & 0x80);
+ fan4min = 0;
+ fan5pin = 0;
+ } else if (sio_data->kind == nct6776) {
+ fan3pin = !(superio_inb(sio_data->sioreg, 0x24) & 0x40);
+ fan4pin = !!(superio_inb(sio_data->sioreg, 0x1C) & 0x01);
+ fan5pin = !!(superio_inb(sio_data->sioreg, 0x1C) & 0x02);
+ fan4min = fan4pin;
+ } else if (sio_data->kind == w83667hg || sio_data->kind == w83667hg_b) {
+ fan3pin = 1;
+ fan4pin = superio_inb(sio_data->sioreg, 0x27) & 0x40;
+ fan5pin = superio_inb(sio_data->sioreg, 0x27) & 0x20;
+ fan4min = fan4pin;
+ } else {
+ fan3pin = 1;
+ fan4pin = !(superio_inb(sio_data->sioreg, 0x29) & 0x06);
+ fan5pin = !(superio_inb(sio_data->sioreg, 0x24) & 0x02);
+ fan4min = fan4pin;
+ }
+
+ superio_exit(sio_data->sioreg);
+
+ data->has_fan = data->has_fan_min = 0x03; /* fan1 and fan2 */
+ data->has_fan |= (fan3pin << 2);
+ data->has_fan_min |= (fan3pin << 2);
+
+ if (sio_data->kind == nct6775 || sio_data->kind == nct6776) {
+ /*
+ * NCT6775F and NCT6776F don't have the W83627EHF_REG_FANDIV1
+ * register
+ */
+ data->has_fan |= (fan4pin << 3) | (fan5pin << 4);
+ data->has_fan_min |= (fan4min << 3) | (fan5pin << 4);
+ } else {
+ /*
+ * It looks like fan4 and fan5 pins can be alternatively used
+ * as fan on/off switches, but fan5 control is write only :/
+ * We assume that if the serial interface is disabled, designers
+ * connected fan5 as input unless they are emitting log 1, which
+ * is not the default.
+ */
+ regval = w83627ehf_read_value(data, W83627EHF_REG_FANDIV1);
+ if ((regval & (1 << 2)) && fan4pin) {
+ data->has_fan |= (1 << 3);
+ data->has_fan_min |= (1 << 3);
+ }
+ if (!(regval & (1 << 1)) && fan5pin) {
+ data->has_fan |= (1 << 4);
+ data->has_fan_min |= (1 << 4);
+ }
+ }
+}
+
static int __devinit w83627ehf_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct w83627ehf_sio_data *sio_data = dev->platform_data;
struct w83627ehf_data *data;
struct resource *res;
- u8 fan3pin, fan4pin, fan4min, fan5pin, en_vrm10;
+ u8 en_vrm10;
int i, err = 0;
res = platform_get_resource(pdev, IORESOURCE_IO, 0);
@@ -2080,30 +2201,6 @@ static int __devinit w83627ehf_probe(struct platform_device *pdev)
}
}
- /* fan4 and fan5 share some pins with the GPIO and serial flash */
- if (sio_data->kind == nct6775) {
- /* On NCT6775, fan4 shares pins with the fdc interface */
- fan3pin = 1;
- fan4pin = !(superio_inb(sio_data->sioreg, 0x2A) & 0x80);
- fan4min = 0;
- fan5pin = 0;
- } else if (sio_data->kind == nct6776) {
- fan3pin = !(superio_inb(sio_data->sioreg, 0x24) & 0x40);
- fan4pin = !!(superio_inb(sio_data->sioreg, 0x1C) & 0x01);
- fan5pin = !!(superio_inb(sio_data->sioreg, 0x1C) & 0x02);
- fan4min = fan4pin;
- } else if (sio_data->kind == w83667hg || sio_data->kind == w83667hg_b) {
- fan3pin = 1;
- fan4pin = superio_inb(sio_data->sioreg, 0x27) & 0x40;
- fan5pin = superio_inb(sio_data->sioreg, 0x27) & 0x20;
- fan4min = fan4pin;
- } else {
- fan3pin = 1;
- fan4pin = !(superio_inb(sio_data->sioreg, 0x29) & 0x06);
- fan5pin = !(superio_inb(sio_data->sioreg, 0x24) & 0x02);
- fan4min = fan4pin;
- }
-
if (fan_debounce &&
(sio_data->kind == nct6775 || sio_data->kind == nct6776)) {
u8 tmp;
@@ -2121,34 +2218,7 @@ static int __devinit w83627ehf_probe(struct platform_device *pdev)
superio_exit(sio_data->sioreg);
- /* It looks like fan4 and fan5 pins can be alternatively used
- as fan on/off switches, but fan5 control is write only :/
- We assume that if the serial interface is disabled, designers
- connected fan5 as input unless they are emitting log 1, which
- is not the default. */
-
- data->has_fan = data->has_fan_min = 0x03; /* fan1 and fan2 */
-
- data->has_fan |= (fan3pin << 2);
- data->has_fan_min |= (fan3pin << 2);
-
- /*
- * NCT6775F and NCT6776F don't have the W83627EHF_REG_FANDIV1 register
- */
- if (sio_data->kind == nct6775 || sio_data->kind == nct6776) {
- data->has_fan |= (fan4pin << 3) | (fan5pin << 4);
- data->has_fan_min |= (fan4min << 3) | (fan5pin << 4);
- } else {
- i = w83627ehf_read_value(data, W83627EHF_REG_FANDIV1);
- if ((i & (1 << 2)) && fan4pin) {
- data->has_fan |= (1 << 3);
- data->has_fan_min |= (1 << 3);
- }
- if (!(i & (1 << 1)) && fan5pin) {
- data->has_fan |= (1 << 4);
- data->has_fan_min |= (1 << 4);
- }
- }
+ w83627ehf_check_fan_inputs(sio_data, data);
/* Read fan clock dividers immediately */
w83627ehf_update_fan_div_common(dev, data);
@@ -2269,6 +2339,16 @@ static int __devinit w83627ehf_probe(struct platform_device *pdev)
goto exit_remove;
}
+ err = device_create_file(dev, &sda_caseopen[0].dev_attr);
+ if (err)
+ goto exit_remove;
+
+ if (sio_data->kind == nct6776) {
+ err = device_create_file(dev, &sda_caseopen[1].dev_attr);
+ if (err)
+ goto exit_remove;
+ }
+
err = device_create_file(dev, &dev_attr_name);
if (err)
goto exit_remove;
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-25 16:03:26 +0000