diff options
Diffstat (limited to 'drivers')
25 files changed, 29 insertions, 34 deletions
diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c index 33c9a44a967..a8a41e07a22 100644 --- a/drivers/bluetooth/ath3k.c +++ b/drivers/bluetooth/ath3k.c @@ -349,7 +349,7 @@ static int ath3k_load_syscfg(struct usb_device *udev) ret = ath3k_get_state(udev, &fw_state); if (ret < 0) { - BT_ERR("Can't get state to change to load configration err"); + BT_ERR("Can't get state to change to load configuration err"); return -EBUSY; } diff --git a/drivers/devfreq/exynos4_bus.c b/drivers/devfreq/exynos4_bus.c index 46d94e9e95b..3f37f3b3f26 100644 --- a/drivers/devfreq/exynos4_bus.c +++ b/drivers/devfreq/exynos4_bus.c @@ -658,7 +658,7 @@ static int exynos4_bus_target(struct device *dev, unsigned long *_freq, if (old_freq == freq) return 0; - dev_dbg(dev, "targetting %lukHz %luuV\n", freq, new_oppinfo.volt); + dev_dbg(dev, "targeting %lukHz %luuV\n", freq, new_oppinfo.volt); mutex_lock(&data->lock); diff --git a/drivers/firewire/ohci.c b/drivers/firewire/ohci.c index 6ce6e07c38c..45912e6e0ac 100644 --- a/drivers/firewire/ohci.c +++ b/drivers/firewire/ohci.c @@ -329,7 +329,7 @@ module_param_named(quirks, param_quirks, int, 0644); MODULE_PARM_DESC(quirks, "Chip quirks (default = 0" ", nonatomic cycle timer = " __stringify(QUIRK_CYCLE_TIMER) ", reset packet generation = " __stringify(QUIRK_RESET_PACKET) - ", AR/selfID endianess = " __stringify(QUIRK_BE_HEADERS) + ", AR/selfID endianness = " __stringify(QUIRK_BE_HEADERS) ", no 1394a enhancements = " __stringify(QUIRK_NO_1394A) ", disable MSI = " __stringify(QUIRK_NO_MSI) ", TI SLLZ059 erratum = " __stringify(QUIRK_TI_SLLZ059) diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c index 9d4a2c2adf0..32158d21c63 100644 --- a/drivers/gpu/drm/i915/i915_debugfs.c +++ b/drivers/gpu/drm/i915/i915_debugfs.c @@ -1460,7 +1460,7 @@ static const char *swizzle_string(unsigned swizzle) case I915_BIT_6_SWIZZLE_9_10_17: return "bit9/bit10/bit17"; case I915_BIT_6_SWIZZLE_UNKNOWN: - return "unkown"; + return "unknown"; } return "bug"; diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig index e7d6a13ec6a..eae0c7e468c 100644 --- a/drivers/hid/Kconfig +++ b/drivers/hid/Kconfig @@ -320,7 +320,7 @@ config HID_LOGITECH_DJ Say Y if you want support for Logitech Unifying receivers and devices. Unifying receivers are capable of pairing up to 6 Logitech compliant devices to the same receiver. Without this driver it will be handled by - generic USB_HID driver and all incomming events will be multiplexed + generic USB_HID driver and all incoming events will be multiplexed into a single mouse and a single keyboard device. config LOGITECH_FF diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig index 3c4417a1d43..02906ca99b4 100644 --- a/drivers/ide/Kconfig +++ b/drivers/ide/Kconfig @@ -700,11 +700,6 @@ config BLK_DEV_IDE_TX4939 depends on SOC_TX4939 select BLK_DEV_IDEDMA_SFF -config BLK_DEV_IDE_AT91 - tristate "Atmel AT91 (SAM9, CAP9, AT572D940HF) IDE support" - depends on ARM && ARCH_AT91 && !ARCH_AT91RM9200 && !ARCH_AT91X40 - select IDE_TIMINGS - config BLK_DEV_IDE_ICSIDE tristate "ICS IDE interface support" depends on ARM && ARCH_ACORN diff --git a/drivers/infiniband/hw/cxgb3/iwch_provider.c b/drivers/infiniband/hw/cxgb3/iwch_provider.c index 0bdf09aa6f4..145d82a64d0 100644 --- a/drivers/infiniband/hw/cxgb3/iwch_provider.c +++ b/drivers/infiniband/hw/cxgb3/iwch_provider.c @@ -783,8 +783,8 @@ static int iwch_dealloc_mw(struct ib_mw *mw) mmid = (mw->rkey) >> 8; cxio_deallocate_window(&rhp->rdev, mhp->attr.stag); remove_handle(rhp, &rhp->mmidr, mmid); - kfree(mhp); PDBG("%s ib_mw %p mmid 0x%x ptr %p\n", __func__, mw, mmid, mhp); + kfree(mhp); return 0; } diff --git a/drivers/isdn/hardware/eicon/divacapi.h b/drivers/isdn/hardware/eicon/divacapi.h index 3942efbbfb5..a315a2914d7 100644 --- a/drivers/isdn/hardware/eicon/divacapi.h +++ b/drivers/isdn/hardware/eicon/divacapi.h @@ -422,11 +422,11 @@ struct _DIVA_CAPI_ADAPTER { #define LAPD 6 /* lapd (Q.921) */ #define X25_L2 7 /* x.25 layer-2 */ #define V120_L2 8 /* V.120 layer-2 protocol */ -#define V42_IN 9 /* V.42 layer-2 protocol, incomming */ +#define V42_IN 9 /* V.42 layer-2 protocol, incoming */ #define V42 10 /* V.42 layer-2 protocol */ #define MDM_ATP 11 /* AT Parser built in the L2 */ #define X75_V42BIS 12 /* ISO7776 (X.75 SLP) modified to support V.42 bis compression */ -#define RTPL2_IN 13 /* RTP layer-2 protocol, incomming */ +#define RTPL2_IN 13 /* RTP layer-2 protocol, incoming */ #define RTPL2 14 /* RTP layer-2 protocol */ #define V120_V42BIS 15 /* V.120 layer-2 protocol supporting V.42 bis compression */ @@ -1125,7 +1125,7 @@ extern word li_total_channels; | Direction | word | Enable compression/decompression for | | | | 0: All direction | | | | 1: disable outgoing data | - | | | 2: disable incomming data | + | | | 2: disable incoming data | | | | 3: disable both direction (default) | +---------------------+------+-----------------------------------------+ | Number of code | word | Parameter P1 of V.42bis in accordance | diff --git a/drivers/isdn/hardware/eicon/pc.h b/drivers/isdn/hardware/eicon/pc.h index 889dc984bbc..329c0c26abf 100644 --- a/drivers/isdn/hardware/eicon/pc.h +++ b/drivers/isdn/hardware/eicon/pc.h @@ -419,11 +419,11 @@ struct dual #define LAPD 6 /* lapd (Q.921) */ #define X25_L2 7 /* x.25 layer-2 */ #define V120_L2 8 /* V.120 layer-2 protocol */ -#define V42_IN 9 /* V.42 layer-2 protocol, incomming */ +#define V42_IN 9 /* V.42 layer-2 protocol, incoming */ #define V42 10 /* V.42 layer-2 protocol */ #define MDM_ATP 11 /* AT Parser built in the L2 */ #define X75_V42BIS 12 /* x.75 with V.42bis */ -#define RTPL2_IN 13 /* RTP layer-2 protocol, incomming */ +#define RTPL2_IN 13 /* RTP layer-2 protocol, incoming */ #define RTPL2 14 /* RTP layer-2 protocol */ #define V120_V42BIS 15 /* V.120 asynchronous mode supporting V.42bis compression */ #define LISTENER 27 /* Layer 2 to listen line */ diff --git a/drivers/isdn/mISDN/l1oip_core.c b/drivers/isdn/mISDN/l1oip_core.c index f8e405c383a..2c0d2c2bf94 100644 --- a/drivers/isdn/mISDN/l1oip_core.c +++ b/drivers/isdn/mISDN/l1oip_core.c @@ -689,7 +689,7 @@ l1oip_socket_thread(void *data) hc->sin_remote.sin_addr.s_addr = htonl(hc->remoteip); hc->sin_remote.sin_port = htons((unsigned short)hc->remoteport); - /* bind to incomming port */ + /* bind to incoming port */ if (socket->ops->bind(socket, (struct sockaddr *)&hc->sin_local, sizeof(hc->sin_local))) { printk(KERN_ERR "%s: Failed to bind socket to port %d.\n", diff --git a/drivers/media/platform/soc_camera/mx2_camera.c b/drivers/media/platform/soc_camera/mx2_camera.c index 1abdc7d9c74..4a574f3cfb2 100644 --- a/drivers/media/platform/soc_camera/mx2_camera.c +++ b/drivers/media/platform/soc_camera/mx2_camera.c @@ -345,7 +345,7 @@ static struct mx2_fmt_cfg mx27_emma_prp_table[] = { /* * This is a generic configuration which is valid for most * prp input-output format combinations. - * We set the incomming and outgoing pixelformat to a + * We set the incoming and outgoing pixelformat to a * 16 Bit wide format and adjust the bytesperline * accordingly. With this configuration the inputdata * will not be changed by the emma and could be any type diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c index c4daee1b728..e81a747ea8c 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c @@ -8843,7 +8843,7 @@ static void bnx2x_set_234_gates(struct bnx2x *bp, bool close) (!close) ? (val | HC_CONFIG_0_REG_BLOCK_DISABLE_0) : (val & ~(u32)HC_CONFIG_0_REG_BLOCK_DISABLE_0)); } else { - /* Prevent incomming interrupts in IGU */ + /* Prevent incoming interrupts in IGU */ val = REG_RD(bp, IGU_REG_BLOCK_CONFIGURATION); REG_WR(bp, IGU_REG_BLOCK_CONFIGURATION, diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c index b6025c305e1..cd345b8969b 100644 --- a/drivers/net/ethernet/marvell/mvneta.c +++ b/drivers/net/ethernet/marvell/mvneta.c @@ -12,7 +12,6 @@ */ #include <linux/kernel.h> -#include <linux/version.h> #include <linux/netdevice.h> #include <linux/etherdevice.h> #include <linux/platform_device.h> diff --git a/drivers/net/ethernet/mellanox/mlx4/en_main.c b/drivers/net/ethernet/mellanox/mlx4/en_main.c index e3c3d122979..b2cca58de91 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_main.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_main.c @@ -64,7 +64,7 @@ static const char mlx4_en_version[] = /* Enable RSS UDP traffic */ MLX4_EN_PARM_INT(udp_rss, 1, - "Enable RSS for incomming UDP traffic or disabled (0)"); + "Enable RSS for incoming UDP traffic or disabled (0)"); /* Priority pausing */ MLX4_EN_PARM_INT(pfctx, 0, "Priority based Flow Control policy on TX[7:0]." diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c index 5d5fd06c4b4..28a6d483836 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c @@ -1150,7 +1150,7 @@ static int qlcnic_check_npar_opertional(struct qlcnic_adapter *adapter) } if (!npar_opt_timeo) { dev_err(&adapter->pdev->dev, - "Waiting for NPAR state to opertional timeout\n"); + "Waiting for NPAR state to operational timeout\n"); return -EIO; } return 0; diff --git a/drivers/net/irda/ali-ircc.c b/drivers/net/irda/ali-ircc.c index 84872043b5c..9cea451a608 100644 --- a/drivers/net/irda/ali-ircc.c +++ b/drivers/net/irda/ali-ircc.c @@ -993,7 +993,7 @@ static void ali_ircc_change_speed(struct ali_ircc_cb *self, __u32 baud) /* Enable Interuupt */ self->ier = IER_EOM; // benjamin 2000/11/20 07:24PM - /* Be ready for incomming frames */ + /* Be ready for incoming frames */ ali_ircc_dma_receive(self); // benajmin 2000/11/8 07:46PM not complete } /* Go to SIR Speed */ diff --git a/drivers/of/address.c b/drivers/of/address.c index 0125524c08c..04da786c84d 100644 --- a/drivers/of/address.c +++ b/drivers/of/address.c @@ -429,7 +429,7 @@ static u64 __of_translate_address(struct device_node *dev, goto bail; bus = of_match_bus(parent); - /* Cound address cells & copy address locally */ + /* Count address cells & copy address locally */ bus->count_cells(dev, &na, &ns); if (!OF_CHECK_COUNTS(na, ns)) { printk(KERN_ERR "prom_parse: Bad cell count for %s\n", diff --git a/drivers/of/platform.c b/drivers/of/platform.c index b80891b4381..e0a6514ab46 100644 --- a/drivers/of/platform.c +++ b/drivers/of/platform.c @@ -436,6 +436,7 @@ EXPORT_SYMBOL(of_platform_bus_probe); * of_platform_populate() - Populate platform_devices from device tree data * @root: parent of the first level to probe or NULL for the root of the tree * @matches: match table, NULL to use the default + * @lookup: auxdata table for matching id and platform_data with device nodes * @parent: parent to hook devices from, NULL for toplevel * * Similar to of_platform_bus_probe(), this function walks the device tree diff --git a/drivers/pcmcia/rsrc_nonstatic.c b/drivers/pcmcia/rsrc_nonstatic.c index 430a9ac5609..065704c605d 100644 --- a/drivers/pcmcia/rsrc_nonstatic.c +++ b/drivers/pcmcia/rsrc_nonstatic.c @@ -369,12 +369,12 @@ static int do_validate_mem(struct pcmcia_socket *s, } } - free_region(res2); - free_region(res1); - dev_dbg(&s->dev, "cs: memory probe 0x%06lx-0x%06lx: %p %p %u %u %u", base, base+size-1, res1, res2, ret, info1, info2); + free_region(res2); + free_region(res1); + if ((ret) || (info1 != info2) || (info1 == 0)) return -EINVAL; diff --git a/drivers/rpmsg/virtio_rpmsg_bus.c b/drivers/rpmsg/virtio_rpmsg_bus.c index f1e323924f1..d85446021dd 100644 --- a/drivers/rpmsg/virtio_rpmsg_bus.c +++ b/drivers/rpmsg/virtio_rpmsg_bus.c @@ -839,7 +839,7 @@ static void rpmsg_recv_done(struct virtqueue *rvq) /* farewell, ept, we don't need you anymore */ kref_put(&ept->refcount, __ept_release); } else - dev_warn(dev, "msg received with no recepient\n"); + dev_warn(dev, "msg received with no recipient\n"); /* publish the real size of the buffer */ sg_init_one(&sg, msg, RPMSG_BUF_SIZE); diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig index d56b2534f3e..db95c547c09 100644 --- a/drivers/scsi/Kconfig +++ b/drivers/scsi/Kconfig @@ -883,7 +883,7 @@ config SCSI_IBMVSCSI This is the IBM POWER Virtual SCSI Client To compile this driver as a module, choose M here: the - module will be called ibmvscsic. + module will be called ibmvscsi. config SCSI_IBMVSCSIS tristate "IBM Virtual SCSI Server support" diff --git a/drivers/staging/android/binder.h b/drivers/staging/android/binder.h index 76ead8dac26..f240464effd 100644 --- a/drivers/staging/android/binder.h +++ b/drivers/staging/android/binder.h @@ -224,7 +224,7 @@ enum binder_driver_return_protocol { BR_SPAWN_LOOPER = _IO('r', 13), /* * No parameters. The driver has determined that a process has no - * threads waiting to service incomming transactions. When a process + * threads waiting to service incoming transactions. When a process * receives this command, it must spawn a new service thread and * register it via bcENTER_LOOPER. */ diff --git a/drivers/staging/octeon/ethernet.c b/drivers/staging/octeon/ethernet.c index 9a2ec251ae4..c3a90e7012a 100644 --- a/drivers/staging/octeon/ethernet.c +++ b/drivers/staging/octeon/ethernet.c @@ -72,7 +72,7 @@ int pow_receive_group = 15; module_param(pow_receive_group, int, 0444); MODULE_PARM_DESC(pow_receive_group, "\n" "\tPOW group to receive packets from. All ethernet hardware\n" - "\twill be configured to send incomming packets to this POW\n" + "\twill be configured to send incoming packets to this POW\n" "\tgroup. Also any other software can submit packets to this\n" "\tgroup for the kernel to process."); diff --git a/drivers/target/sbp/sbp_target.c b/drivers/target/sbp/sbp_target.c index 2e8d06f198a..6917a9e938e 100644 --- a/drivers/target/sbp/sbp_target.c +++ b/drivers/target/sbp/sbp_target.c @@ -1719,7 +1719,7 @@ static struct se_node_acl *sbp_alloc_fabric_acl(struct se_portal_group *se_tpg) nacl = kzalloc(sizeof(struct sbp_nacl), GFP_KERNEL); if (!nacl) { - pr_err("Unable to alocate struct sbp_nacl\n"); + pr_err("Unable to allocate struct sbp_nacl\n"); return NULL; } diff --git a/drivers/tty/ipwireless/hardware.c b/drivers/tty/ipwireless/hardware.c index b4ba0670dc5..97a511f4185 100644 --- a/drivers/tty/ipwireless/hardware.c +++ b/drivers/tty/ipwireless/hardware.c @@ -646,7 +646,7 @@ static void queue_received_packet(struct ipw_hardware *hw, (*assem) = pool_allocate(hw, *assem, length); if (!(*assem)) { printk(KERN_ERR IPWIRELESS_PCCARD_NAME - ": no memory for incomming data packet, dropped!\n"); + ": no memory for incoming data packet, dropped!\n"); return; } (*assem)->protocol = protocol; @@ -670,7 +670,7 @@ static void queue_received_packet(struct ipw_hardware *hw, packet = pool_allocate(hw, NULL, length); if (!packet) { printk(KERN_ERR IPWIRELESS_PCCARD_NAME - ": no memory for incomming ctrl packet, dropped!\n"); + ": no memory for incoming ctrl packet, dropped!\n"); return; } packet->protocol = protocol; |