diff options
Diffstat (limited to 'drivers')
73 files changed, 809 insertions, 532 deletions
diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c index 611ce9061dc..407ad13cac2 100644 --- a/drivers/acpi/scan.c +++ b/drivers/acpi/scan.c @@ -968,7 +968,7 @@ int acpi_bus_get_device(acpi_handle handle, struct acpi_device **device) } return 0; } -EXPORT_SYMBOL_GPL(acpi_bus_get_device); +EXPORT_SYMBOL(acpi_bus_get_device); int acpi_device_add(struct acpi_device *device, void (*release)(struct device *)) diff --git a/drivers/bcma/driver_pci.c b/drivers/bcma/driver_pci.c index c9fd6943ce4..50329d1057e 100644 --- a/drivers/bcma/driver_pci.c +++ b/drivers/bcma/driver_pci.c @@ -210,25 +210,6 @@ static void bcma_core_pci_config_fixup(struct bcma_drv_pci *pc) } } -static void bcma_core_pci_power_save(struct bcma_drv_pci *pc, bool up) -{ - u16 data; - - if (pc->core->id.rev >= 15 && pc->core->id.rev <= 20) { - data = up ? 0x74 : 0x7C; - bcma_pcie_mdio_writeread(pc, BCMA_CORE_PCI_MDIO_BLK1, - BCMA_CORE_PCI_MDIO_BLK1_MGMT1, 0x7F64); - bcma_pcie_mdio_writeread(pc, BCMA_CORE_PCI_MDIO_BLK1, - BCMA_CORE_PCI_MDIO_BLK1_MGMT3, data); - } else if (pc->core->id.rev >= 21 && pc->core->id.rev <= 22) { - data = up ? 0x75 : 0x7D; - bcma_pcie_mdio_writeread(pc, BCMA_CORE_PCI_MDIO_BLK1, - BCMA_CORE_PCI_MDIO_BLK1_MGMT1, 0x7E65); - bcma_pcie_mdio_writeread(pc, BCMA_CORE_PCI_MDIO_BLK1, - BCMA_CORE_PCI_MDIO_BLK1_MGMT3, data); - } -} - /************************************************** * Init. **************************************************/ @@ -255,6 +236,32 @@ void bcma_core_pci_init(struct bcma_drv_pci *pc) bcma_core_pci_clientmode_init(pc); } +void bcma_core_pci_power_save(struct bcma_bus *bus, bool up) +{ + struct bcma_drv_pci *pc; + u16 data; + + if (bus->hosttype != BCMA_HOSTTYPE_PCI) + return; + + pc = &bus->drv_pci[0]; + + if (pc->core->id.rev >= 15 && pc->core->id.rev <= 20) { + data = up ? 0x74 : 0x7C; + bcma_pcie_mdio_writeread(pc, BCMA_CORE_PCI_MDIO_BLK1, + BCMA_CORE_PCI_MDIO_BLK1_MGMT1, 0x7F64); + bcma_pcie_mdio_writeread(pc, BCMA_CORE_PCI_MDIO_BLK1, + BCMA_CORE_PCI_MDIO_BLK1_MGMT3, data); + } else if (pc->core->id.rev >= 21 && pc->core->id.rev <= 22) { + data = up ? 0x75 : 0x7D; + bcma_pcie_mdio_writeread(pc, BCMA_CORE_PCI_MDIO_BLK1, + BCMA_CORE_PCI_MDIO_BLK1_MGMT1, 0x7E65); + bcma_pcie_mdio_writeread(pc, BCMA_CORE_PCI_MDIO_BLK1, + BCMA_CORE_PCI_MDIO_BLK1_MGMT3, data); + } +} +EXPORT_SYMBOL_GPL(bcma_core_pci_power_save); + int bcma_core_pci_irq_ctl(struct bcma_drv_pci *pc, struct bcma_device *core, bool enable) { @@ -310,8 +317,6 @@ void bcma_core_pci_up(struct bcma_bus *bus) pc = &bus->drv_pci[0]; - bcma_core_pci_power_save(pc, true); - bcma_core_pci_extend_L1timer(pc, true); } EXPORT_SYMBOL_GPL(bcma_core_pci_up); @@ -326,7 +331,5 @@ void bcma_core_pci_down(struct bcma_bus *bus) pc = &bus->drv_pci[0]; bcma_core_pci_extend_L1timer(pc, false); - - bcma_core_pci_power_save(pc, false); } EXPORT_SYMBOL_GPL(bcma_core_pci_down); diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c index a12b923bbac..0a327f4154a 100644 --- a/drivers/bluetooth/ath3k.c +++ b/drivers/bluetooth/ath3k.c @@ -85,6 +85,7 @@ static struct usb_device_id ath3k_table[] = { { USB_DEVICE(0x04CA, 0x3008) }, { USB_DEVICE(0x13d3, 0x3362) }, { USB_DEVICE(0x0CF3, 0xE004) }, + { USB_DEVICE(0x0CF3, 0xE005) }, { USB_DEVICE(0x0930, 0x0219) }, { USB_DEVICE(0x0489, 0xe057) }, { USB_DEVICE(0x13d3, 0x3393) }, @@ -126,6 +127,7 @@ static struct usb_device_id ath3k_blist_tbl[] = { { USB_DEVICE(0x04ca, 0x3008), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x13d3, 0x3362), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0cf3, 0xe004), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x0cf3, 0xe005), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0930, 0x0219), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0489, 0xe057), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x13d3, 0x3393), .driver_info = BTUSB_ATH3012 }, diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index 8e16f0af635..f3dfc0a88fd 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -102,6 +102,7 @@ static struct usb_device_id btusb_table[] = { /* Broadcom BCM20702A0 */ { USB_DEVICE(0x0b05, 0x17b5) }, + { USB_DEVICE(0x0b05, 0x17cb) }, { USB_DEVICE(0x04ca, 0x2003) }, { USB_DEVICE(0x0489, 0xe042) }, { USB_DEVICE(0x413c, 0x8197) }, @@ -112,6 +113,9 @@ static struct usb_device_id btusb_table[] = { /*Broadcom devices with vendor specific id */ { USB_VENDOR_AND_INTERFACE_INFO(0x0a5c, 0xff, 0x01, 0x01) }, + /* Belkin F8065bf - Broadcom based */ + { USB_VENDOR_AND_INTERFACE_INFO(0x050d, 0xff, 0x01, 0x01) }, + { } /* Terminating entry */ }; @@ -148,6 +152,7 @@ static struct usb_device_id blacklist_table[] = { { USB_DEVICE(0x04ca, 0x3008), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x13d3, 0x3362), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0cf3, 0xe004), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x0cf3, 0xe005), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0930, 0x0219), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0489, 0xe057), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x13d3, 0x3393), .driver_info = BTUSB_ATH3012 }, diff --git a/drivers/bus/mvebu-mbus.c b/drivers/bus/mvebu-mbus.c index 19ab6ff53d5..2394e9753ef 100644 --- a/drivers/bus/mvebu-mbus.c +++ b/drivers/bus/mvebu-mbus.c @@ -700,6 +700,7 @@ static int __init mvebu_mbus_common_init(struct mvebu_mbus_state *mbus, phys_addr_t sdramwins_phys_base, size_t sdramwins_size) { + struct device_node *np; int win; mbus->mbuswins_base = ioremap(mbuswins_phys_base, mbuswins_size); @@ -712,8 +713,11 @@ static int __init mvebu_mbus_common_init(struct mvebu_mbus_state *mbus, return -ENOMEM; } - if (of_find_compatible_node(NULL, NULL, "marvell,coherency-fabric")) + np = of_find_compatible_node(NULL, NULL, "marvell,coherency-fabric"); + if (np) { mbus->hw_io_coherency = 1; + of_node_put(np); + } for (win = 0; win < mbus->soc->num_wins; win++) mvebu_mbus_disable_window(mbus, win); @@ -861,11 +865,13 @@ static void __init mvebu_mbus_get_pcie_resources(struct device_node *np, int ret; /* - * These are optional, so we clear them and they'll - * be zero if they are missing from the DT. + * These are optional, so we make sure that resource_size(x) will + * return 0. */ memset(mem, 0, sizeof(struct resource)); + mem->end = -1; memset(io, 0, sizeof(struct resource)); + io->end = -1; ret = of_property_read_u32_array(np, "pcie-mem-aperture", reg, ARRAY_SIZE(reg)); if (!ret) { diff --git a/drivers/cpufreq/cpufreq-cpu0.c b/drivers/cpufreq/cpufreq-cpu0.c index 78c49d8e0f4..c522a95c0e1 100644 --- a/drivers/cpufreq/cpufreq-cpu0.c +++ b/drivers/cpufreq/cpufreq-cpu0.c @@ -229,7 +229,7 @@ static int cpu0_cpufreq_probe(struct platform_device *pdev) if (of_property_read_u32(np, "clock-latency", &transition_latency)) transition_latency = CPUFREQ_ETERNAL; - if (cpu_reg) { + if (!IS_ERR(cpu_reg)) { struct opp *opp; unsigned long min_uV, max_uV; int i; diff --git a/drivers/cpufreq/intel_pstate.c b/drivers/cpufreq/intel_pstate.c index 9733f29ed14..32b3479a240 100644 --- a/drivers/cpufreq/intel_pstate.c +++ b/drivers/cpufreq/intel_pstate.c @@ -394,7 +394,10 @@ static void intel_pstate_set_pstate(struct cpudata *cpu, int pstate) trace_cpu_frequency(pstate * 100000, cpu->cpu); cpu->pstate.current_pstate = pstate; - wrmsrl(MSR_IA32_PERF_CTL, pstate << 8); + if (limits.no_turbo) + wrmsrl(MSR_IA32_PERF_CTL, BIT(32) | (pstate << 8)); + else + wrmsrl(MSR_IA32_PERF_CTL, pstate << 8); } diff --git a/drivers/cpufreq/spear-cpufreq.c b/drivers/cpufreq/spear-cpufreq.c index 19e364fa595..3f418166ce0 100644 --- a/drivers/cpufreq/spear-cpufreq.c +++ b/drivers/cpufreq/spear-cpufreq.c @@ -113,7 +113,7 @@ static int spear_cpufreq_target(struct cpufreq_policy *policy, unsigned int target_freq, unsigned int relation) { struct cpufreq_freqs freqs; - unsigned long newfreq; + long newfreq; struct clk *srcclk; int index, ret, mult = 1; diff --git a/drivers/gpio/gpio-rcar.c b/drivers/gpio/gpio-rcar.c index e3745eb0757..6038966ab04 100644 --- a/drivers/gpio/gpio-rcar.c +++ b/drivers/gpio/gpio-rcar.c @@ -293,10 +293,9 @@ static void gpio_rcar_parse_pdata(struct gpio_rcar_priv *p) if (pdata) { p->config = *pdata; } else if (IS_ENABLED(CONFIG_OF) && np) { - ret = of_parse_phandle_with_args(np, "gpio-ranges", - "#gpio-range-cells", 0, &args); - p->config.number_of_pins = ret == 0 && args.args_count == 3 - ? args.args[2] + ret = of_parse_phandle_with_fixed_args(np, "gpio-ranges", 3, 0, + &args); + p->config.number_of_pins = ret == 0 ? args.args[2] : RCAR_MAX_GPIO_PER_BANK; p->config.gpio_base = -1; } diff --git a/drivers/iommu/arm-smmu.c b/drivers/iommu/arm-smmu.c index f417e89e1e7..181c9ba929c 100644 --- a/drivers/iommu/arm-smmu.c +++ b/drivers/iommu/arm-smmu.c @@ -377,6 +377,7 @@ struct arm_smmu_cfg { u32 cbar; pgd_t *pgd; }; +#define INVALID_IRPTNDX 0xff #define ARM_SMMU_CB_ASID(cfg) ((cfg)->cbndx) #define ARM_SMMU_CB_VMID(cfg) ((cfg)->cbndx + 1) @@ -840,7 +841,7 @@ static int arm_smmu_init_domain_context(struct iommu_domain *domain, if (IS_ERR_VALUE(ret)) { dev_err(smmu->dev, "failed to request context IRQ %d (%u)\n", root_cfg->irptndx, irq); - root_cfg->irptndx = -1; + root_cfg->irptndx = INVALID_IRPTNDX; goto out_free_context; } @@ -869,7 +870,7 @@ static void arm_smmu_destroy_domain_context(struct iommu_domain *domain) writel_relaxed(0, cb_base + ARM_SMMU_CB_SCTLR); arm_smmu_tlb_inv_context(root_cfg); - if (root_cfg->irptndx != -1) { + if (root_cfg->irptndx != INVALID_IRPTNDX) { irq = smmu->irqs[smmu->num_global_irqs + root_cfg->irptndx]; free_irq(irq, domain); } @@ -1857,8 +1858,6 @@ static int arm_smmu_device_dt_probe(struct platform_device *pdev) goto out_put_parent; } - arm_smmu_device_reset(smmu); - for (i = 0; i < smmu->num_global_irqs; ++i) { err = request_irq(smmu->irqs[i], arm_smmu_global_fault, @@ -1876,6 +1875,8 @@ static int arm_smmu_device_dt_probe(struct platform_device *pdev) spin_lock(&arm_smmu_devices_lock); list_add(&smmu->list, &arm_smmu_devices); spin_unlock(&arm_smmu_devices_lock); + + arm_smmu_device_reset(smmu); return 0; out_free_irqs: @@ -1966,10 +1967,10 @@ static int __init arm_smmu_init(void) return ret; /* Oh, for a proper bus abstraction */ - if (!iommu_present(&platform_bus_type)); + if (!iommu_present(&platform_bus_type)) bus_set_iommu(&platform_bus_type, &arm_smmu_ops); - if (!iommu_present(&amba_bustype)); + if (!iommu_present(&amba_bustype)) bus_set_iommu(&amba_bustype, &arm_smmu_ops); return 0; diff --git a/drivers/mmc/host/sh_mobile_sdhi.c b/drivers/mmc/host/sh_mobile_sdhi.c index 87ed3fb5149..f344659dcea 100644 --- a/drivers/mmc/host/sh_mobile_sdhi.c +++ b/drivers/mmc/host/sh_mobile_sdhi.c @@ -113,14 +113,14 @@ static const struct sh_mobile_sdhi_ops sdhi_ops = { }; static const struct of_device_id sh_mobile_sdhi_of_match[] = { - { .compatible = "renesas,shmobile-sdhi" }, - { .compatible = "renesas,sh7372-sdhi" }, - { .compatible = "renesas,sh73a0-sdhi", .data = &sh_mobile_sdhi_of_cfg[0], }, - { .compatible = "renesas,r8a73a4-sdhi", .data = &sh_mobile_sdhi_of_cfg[0], }, - { .compatible = "renesas,r8a7740-sdhi", .data = &sh_mobile_sdhi_of_cfg[0], }, - { .compatible = "renesas,r8a7778-sdhi", .data = &sh_mobile_sdhi_of_cfg[0], }, - { .compatible = "renesas,r8a7779-sdhi", .data = &sh_mobile_sdhi_of_cfg[0], }, - { .compatible = "renesas,r8a7790-sdhi", .data = &sh_mobile_sdhi_of_cfg[0], }, + { .compatible = "renesas,sdhi-shmobile" }, + { .compatible = "renesas,sdhi-sh7372" }, + { .compatible = "renesas,sdhi-sh73a0", .data = &sh_mobile_sdhi_of_cfg[0], }, + { .compatible = "renesas,sdhi-r8a73a4", .data = &sh_mobile_sdhi_of_cfg[0], }, + { .compatible = "renesas,sdhi-r8a7740", .data = &sh_mobile_sdhi_of_cfg[0], }, + { .compatible = "renesas,sdhi-r8a7778", .data = &sh_mobile_sdhi_of_cfg[0], }, + { .compatible = "renesas,sdhi-r8a7779", .data = &sh_mobile_sdhi_of_cfg[0], }, + { .compatible = "renesas,sdhi-r8a7790", .data = &sh_mobile_sdhi_of_cfg[0], }, {}, }; MODULE_DEVICE_TABLE(of, sh_mobile_sdhi_of_match); diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index 55bbb8b8200..e883bfe2e72 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -1724,6 +1724,7 @@ static int __bond_release_one(struct net_device *bond_dev, struct bonding *bond = netdev_priv(bond_dev); struct slave *slave, *oldcurrent; struct sockaddr addr; + int old_flags = bond_dev->flags; netdev_features_t old_features = bond_dev->features; /* slave is not a slave or master is not master of this slave */ @@ -1855,12 +1856,18 @@ static int __bond_release_one(struct net_device *bond_dev, * bond_change_active_slave(..., NULL) */ if (!USES_PRIMARY(bond->params.mode)) { - /* unset promiscuity level from slave */ - if (bond_dev->flags & IFF_PROMISC) + /* unset promiscuity level from slave + * NOTE: The NETDEV_CHANGEADDR call above may change the value + * of the IFF_PROMISC flag in the bond_dev, but we need the + * value of that flag before that change, as that was the value + * when this slave was attached, so we cache at the start of the + * function and use it here. Same goes for ALLMULTI below + */ + if (old_flags & IFF_PROMISC) dev_set_promiscuity(slave_dev, -1); /* unset allmulti level from slave */ - if (bond_dev->flags & IFF_ALLMULTI) + if (old_flags & IFF_ALLMULTI) dev_set_allmulti(slave_dev, -1); bond_hw_addr_flush(bond_dev, slave_dev); diff --git a/drivers/net/can/flexcan.c b/drivers/net/can/flexcan.c index 71c677e651d..3f21142138b 100644 --- a/drivers/net/can/flexcan.c +++ b/drivers/net/can/flexcan.c @@ -702,7 +702,6 @@ static int flexcan_chip_start(struct net_device *dev) { struct flexcan_priv *priv = netdev_priv(dev); struct flexcan_regs __iomem *regs = priv->base; - unsigned int i; int err; u32 reg_mcr, reg_ctrl; @@ -772,17 +771,6 @@ static int flexcan_chip_start(struct net_device *dev) netdev_dbg(dev, "%s: writing ctrl=0x%08x", __func__, reg_ctrl); flexcan_write(reg_ctrl, ®s->ctrl); - for (i = 0; i < ARRAY_SIZE(regs->cantxfg); i++) { - flexcan_write(0, ®s->cantxfg[i].can_ctrl); - flexcan_write(0, ®s->cantxfg[i].can_id); - flexcan_write(0, ®s->cantxfg[i].data[0]); - flexcan_write(0, ®s->cantxfg[i].data[1]); - - /* put MB into rx queue */ - flexcan_write(FLEXCAN_MB_CNT_CODE(0x4), - ®s->cantxfg[i].can_ctrl); - } - /* acceptance mask/acceptance code (accept everything) */ flexcan_write(0x0, ®s->rxgmask); flexcan_write(0x0, ®s->rx14mask); diff --git a/drivers/net/can/slcan.c b/drivers/net/can/slcan.c index 874188ba06f..25377e547f9 100644 --- a/drivers/net/can/slcan.c +++ b/drivers/net/can/slcan.c @@ -76,6 +76,10 @@ MODULE_PARM_DESC(maxdev, "Maximum number of slcan interfaces"); /* maximum rx buffer len: extended CAN frame with timestamp */ #define SLC_MTU (sizeof("T1111222281122334455667788EA5F\r")+1) +#define SLC_CMD_LEN 1 +#define SLC_SFF_ID_LEN 3 +#define SLC_EFF_ID_LEN 8 + struct slcan { int magic; @@ -142,47 +146,63 @@ static void slc_bump(struct slcan *sl) { struct sk_buff *skb; struct can_frame cf; - int i, dlc_pos, tmp; - unsigned long ultmp; - char cmd = sl->rbuff[0]; - - if ((cmd != 't') && (cmd != 'T') && (cmd != 'r') && (cmd != 'R')) + int i, tmp; + u32 tmpid; + char *cmd = sl->rbuff; + + cf.can_id = 0; + + switch (*cmd) { + case 'r': + cf.can_id = CAN_RTR_FLAG; + /* fallthrough */ + case 't': + /* store dlc ASCII value and terminate SFF CAN ID string */ + cf.can_dlc = sl->rbuff[SLC_CMD_LEN + SLC_SFF_ID_LEN]; + sl->rbuff[SLC_CMD_LEN + SLC_SFF_ID_LEN] = 0; + /* point to payload data behind the dlc */ + cmd += SLC_CMD_LEN + SLC_SFF_ID_LEN + 1; + break; + case 'R': + cf.can_id = CAN_RTR_FLAG; + /* fallthrough */ + case 'T': + cf.can_id |= CAN_EFF_FLAG; + /* store dlc ASCII value and terminate EFF CAN ID string */ + cf.can_dlc = sl->rbuff[SLC_CMD_LEN + SLC_EFF_ID_LEN]; + sl->rbuff[SLC_CMD_LEN + SLC_EFF_ID_LEN] = 0; + /* point to payload data behind the dlc */ + cmd += SLC_CMD_LEN + SLC_EFF_ID_LEN + 1; + break; + default: return; + } - if (cmd & 0x20) /* tiny chars 'r' 't' => standard frame format */ - dlc_pos = 4; /* dlc position tiiid */ - else - dlc_pos = 9; /* dlc position Tiiiiiiiid */ - - if (!((sl->rbuff[dlc_pos] >= '0') && (sl->rbuff[dlc_pos] < '9'))) + if (kstrtou32(sl->rbuff + SLC_CMD_LEN, 16, &tmpid)) return; - cf.can_dlc = sl->rbuff[dlc_pos] - '0'; /* get can_dlc from ASCII val */ + cf.can_id |= tmpid; - sl->rbuff[dlc_pos] = 0; /* terminate can_id string */ - - if (kstrtoul(sl->rbuff+1, 16, &ultmp)) + /* get can_dlc from sanitized ASCII value */ + if (cf.can_dlc >= '0' && cf.can_dlc < '9') + cf.can_dlc -= '0'; + else return; - cf.can_id = ultmp; - - if (!(cmd & 0x20)) /* NO tiny chars => extended frame format */ - cf.can_id |= CAN_EFF_FLAG; - - if ((cmd | 0x20) == 'r') /* RTR frame */ - cf.can_id |= CAN_RTR_FLAG; - *(u64 *) (&cf.data) = 0; /* clear payload */ - for (i = 0, dlc_pos++; i < cf.can_dlc; i++) { - tmp = hex_to_bin(sl->rbuff[dlc_pos++]); - if (tmp < 0) - return; - cf.data[i] = (tmp << 4); - tmp = hex_to_bin(sl->rbuff[dlc_pos++]); - if (tmp < 0) - return; - cf.data[i] |= tmp; + /* RTR frames may have a dlc > 0 but they never have any data bytes */ + if (!(cf.can_id & CAN_RTR_FLAG)) { + for (i = 0; i < cf.can_dlc; i++) { + tmp = hex_to_bin(*cmd++); + if (tmp < 0) + return; + cf.data[i] = (tmp << 4); + tmp = hex_to_bin(*cmd++); + if (tmp < 0) + return; + cf.data[i] |= tmp; + } } skb = dev_alloc_skb(sizeof(struct can_frame) + @@ -209,7 +229,6 @@ static void slc_bump(struct slcan *sl) /* parse tty input stream */ static void slcan_unesc(struct slcan *sl, unsigned char s) { - if ((s == '\r') || (s == '\a')) { /* CR or BEL ends the pdu */ if (!test_and_clear_bit(SLF_ERROR, &sl->flags) && (sl->rcount > 4)) { @@ -236,27 +255,46 @@ static void slcan_unesc(struct slcan *sl, unsigned char s) /* Encapsulate one can_frame and stuff into a TTY queue. */ static void slc_encaps(struct slcan *sl, struct can_frame *cf) { - int actual, idx, i; - char cmd; + int actual, i; + unsigned char *pos; + unsigned char *endpos; + canid_t id = cf->can_id; + + pos = sl->xbuff; if (cf->can_id & CAN_RTR_FLAG) - cmd = 'R'; /* becomes 'r' in standard frame format */ + *pos = 'R'; /* becomes 'r' in standard frame format (SFF) */ else - cmd = 'T'; /* becomes 't' in standard frame format */ + *pos = 'T'; /* becomes 't' in standard frame format (SSF) */ - if (cf->can_id & CAN_EFF_FLAG) - sprintf(sl->xbuff, "%c%08X%d", cmd, - cf->can_id & CAN_EFF_MASK, cf->can_dlc); - else - sprintf(sl->xbuff, "%c%03X%d", cmd | 0x20, - cf->can_id & CAN_SFF_MASK, cf->can_dlc); + /* determine number of chars for the CAN-identifier */ + if (cf->can_id & CAN_EFF_FLAG) { + id &= CAN_EFF_MASK; + endpos = pos + SLC_EFF_ID_LEN; + } else { + *pos |= 0x20; /* convert R/T to lower case for SFF */ + id &= CAN_SFF_MASK; + endpos = pos + SLC_SFF_ID_LEN; + } - idx = strlen(sl->xbuff); + /* build 3 (SFF) or 8 (EFF) digit CAN identifier */ + pos++; + while (endpos >= pos) { + *endpos-- = hex_asc_upper[id & 0xf]; + id >>= 4; + } + + pos += (cf->can_id & CAN_EFF_FLAG) ? SLC_EFF_ID_LEN : SLC_SFF_ID_LEN; - for (i = 0; i < cf->can_dlc; i++) - sprintf(&sl->xbuff[idx + 2*i], "%02X", cf->data[i]); + *pos++ = cf->can_dlc + '0'; + + /* RTR frames may have a dlc > 0 but they never have any data bytes */ + if (!(cf->can_id & CAN_RTR_FLAG)) { + for (i = 0; i < cf->can_dlc; i++) + pos = hex_byte_pack_upper(pos, cf->data[i]); + } - strcat(sl->xbuff, "\r"); /* add terminating character */ + *pos++ = '\r'; /* Order of next two lines is *very* important. * When we are sending a little amount of data, @@ -267,8 +305,8 @@ static void slc_encaps(struct slcan *sl, struct can_frame *cf) * 14 Oct 1994 Dmitry Gorodchanin. */ set_bit(TTY_DO_WRITE_WAKEUP, &sl->tty->flags); - actual = sl->tty->ops->write(sl->tty, sl->xbuff, strlen(sl->xbuff)); - sl->xleft = strlen(sl->xbuff) - actual; + actual = sl->tty->ops->write(sl->tty, sl->xbuff, pos - sl->xbuff); + sl->xleft = (pos - sl->xbuff) - actual; sl->xhead = sl->xbuff + actual; sl->dev->stats.tx_bytes += cf->can_dlc; } @@ -286,11 +324,13 @@ static void slcan_write_wakeup(struct tty_struct *tty) if (!sl || sl->magic != SLCAN_MAGIC || !netif_running(sl->dev)) return; + spin_lock(&sl->lock); if (sl->xleft <= 0) { /* Now serial buffer is almost free & we can start * transmission of another packet */ sl->dev->stats.tx_packets++; clear_bit(TTY_DO_WRITE_WAKEUP, &tty->flags); + spin_unlock(&sl->lock); netif_wake_queue(sl->dev); return; } @@ -298,6 +338,7 @@ static void slcan_write_wakeup(struct tty_struct *tty) actual = tty->ops->write(tty, sl->xhead, sl->xleft); sl->xleft -= actual; sl->xhead += actual; + spin_unlock(&sl->lock); } /* Send a can_frame to a TTY queue. */ diff --git a/drivers/net/can/usb/peak_usb/pcan_usb_core.c b/drivers/net/can/usb/peak_usb/pcan_usb_core.c index a0f647f92bf..0b7a4c3b01a 100644 --- a/drivers/net/can/usb/peak_usb/pcan_usb_core.c +++ b/drivers/net/can/usb/peak_usb/pcan_usb_core.c @@ -463,7 +463,7 @@ static int peak_usb_start(struct peak_usb_device *dev) if (i < PCAN_USB_MAX_TX_URBS) { if (i == 0) { netdev_err(netdev, "couldn't setup any tx URB\n"); - return err; + goto err_tx; } netdev_warn(netdev, "tx performance may be slow\n"); @@ -472,7 +472,7 @@ static int peak_usb_start(struct peak_usb_device *dev) if (dev->adapter->dev_start) { err = dev->adapter->dev_start(dev); if (err) - goto failed; + goto err_adapter; } dev->state |= PCAN_USB_STATE_STARTED; @@ -481,19 +481,26 @@ static int peak_usb_start(struct peak_usb_device *dev) if (dev->adapter->dev_set_bus) { err = dev->adapter->dev_set_bus(dev, 1); if (err) - goto failed; + goto err_adapter; } dev->can.state = CAN_STATE_ERROR_ACTIVE; return 0; -failed: +err_adapter: if (err == -ENODEV) netif_device_detach(dev->netdev); netdev_warn(netdev, "couldn't submit control: %d\n", err); + for (i = 0; i < PCAN_USB_MAX_TX_URBS; i++) { + usb_free_urb(dev->tx_contexts[i].urb); + dev->tx_contexts[i].urb = NULL; + } +err_tx: + usb_kill_anchored_urbs(&dev->rx_submitted); + return err; } diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c index 61726af1de6..e66beff2704 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c @@ -2481,8 +2481,7 @@ load_error_cnic2: load_error_cnic1: bnx2x_napi_disable_cnic(bp); /* Update the number of queues without the cnic queues */ - rc = bnx2x_set_real_num_queues(bp, 0); - if (rc) + if (bnx2x_set_real_num_queues(bp, 0)) BNX2X_ERR("Unable to set real_num_queues not including cnic\n"); load_error_cnic0: BNX2X_ERR("CNIC-related load failed\n"); diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c index d60a2ea3da1..51468227bf3 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c @@ -175,6 +175,7 @@ typedef int (*read_sfp_module_eeprom_func_p)(struct bnx2x_phy *phy, #define EDC_MODE_LINEAR 0x0022 #define EDC_MODE_LIMITING 0x0044 #define EDC_MODE_PASSIVE_DAC 0x0055 +#define EDC_MODE_ACTIVE_DAC 0x0066 /* ETS defines*/ #define DCBX_INVALID_COS (0xFF) @@ -3684,6 +3685,41 @@ static void bnx2x_warpcore_enable_AN_KR2(struct bnx2x_phy *phy, bnx2x_update_link_attr(params, vars->link_attr_sync); } +static void bnx2x_disable_kr2(struct link_params *params, + struct link_vars *vars, + struct bnx2x_phy *phy) +{ + struct bnx2x *bp = params->bp; + int i; + static struct bnx2x_reg_set reg_set[] = { + /* Step 1 - Program the TX/RX alignment markers */ + {MDIO_WC_DEVAD, MDIO_WC_REG_CL82_USERB1_TX_CTRL5, 0x7690}, + {MDIO_WC_DEVAD, MDIO_WC_REG_CL82_USERB1_TX_CTRL7, 0xe647}, + {MDIO_WC_DEVAD, MDIO_WC_REG_CL82_USERB1_TX_CTRL6, 0xc4f0}, + {MDIO_WC_DEVAD, MDIO_WC_REG_CL82_USERB1_TX_CTRL9, 0x7690}, + {MDIO_WC_DEVAD, MDIO_WC_REG_CL82_USERB1_RX_CTRL11, 0xe647}, + {MDIO_WC_DEVAD, MDIO_WC_REG_CL82_USERB1_RX_CTRL10, 0xc4f0}, + {MDIO_WC_DEVAD, MDIO_WC_REG_CL73_USERB0_CTRL, 0x000c}, + {MDIO_WC_DEVAD, MDIO_WC_REG_CL73_BAM_CTRL1, 0x6000}, + {MDIO_WC_DEVAD, MDIO_WC_REG_CL73_BAM_CTRL3, 0x0000}, + {MDIO_WC_DEVAD, MDIO_WC_REG_CL73_BAM_CODE_FIELD, 0x0002}, + {MDIO_WC_DEVAD, MDIO_WC_REG_ETA_CL73_OUI1, 0x0000}, + {MDIO_WC_DEVAD, MDIO_WC_REG_ETA_CL73_OUI2, 0x0af7}, + {MDIO_WC_DEVAD, MDIO_WC_REG_ETA_CL73_OUI3, 0x0af7}, + {MDIO_WC_DEVAD, MDIO_WC_REG_ETA_CL73_LD_BAM_CODE, 0x0002}, + {MDIO_WC_DEVAD, MDIO_WC_REG_ETA_CL73_LD_UD_CODE, 0x0000} + }; + DP(NETIF_MSG_LINK, "Disabling 20G-KR2\n"); + + for (i = 0; i < ARRAY_SIZE(reg_set); i++) + bnx2x_cl45_write(bp, phy, reg_set[i].devad, reg_set[i].reg, + reg_set[i].val); + vars->link_attr_sync &= ~LINK_ATTR_SYNC_KR2_ENABLE; + bnx2x_update_link_attr(params, vars->link_attr_sync); + + vars->check_kr2_recovery_cnt = CHECK_KR2_RECOVERY_CNT; +} + static void bnx2x_warpcore_set_lpi_passthrough(struct bnx2x_phy *phy, struct link_params *params) { @@ -3715,7 +3751,6 @@ static void bnx2x_warpcore_enable_AN_KR(struct bnx2x_phy *phy, struct link_params *params, struct link_vars *vars) { u16 lane, i, cl72_ctrl, an_adv = 0; - u16 ucode_ver; struct bnx2x *bp = params->bp; static struct bnx2x_reg_set reg_set[] = { {MDIO_WC_DEVAD, MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X2, 0x7}, @@ -3806,15 +3841,7 @@ static void bnx2x_warpcore_enable_AN_KR(struct bnx2x_phy *phy, /* Advertise pause */ bnx2x_ext_phy_set_pause(params, phy, vars); - /* Set KR Autoneg Work-Around flag for Warpcore version older than D108 - */ - bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD, - MDIO_WC_REG_UC_INFO_B1_VERSION, &ucode_ver); - if (ucode_ver < 0xd108) { - DP(NETIF_MSG_LINK, "Enable AN KR work-around. WC ver:0x%x\n", - ucode_ver); - vars->rx_tx_asic_rst = MAX_KR_LINK_RETRY; - } + vars->rx_tx_asic_rst = MAX_KR_LINK_RETRY; bnx2x_cl45_read_or_write(bp, phy, MDIO_WC_DEVAD, MDIO_WC_REG_DIGITAL5_MISC7, 0x100); @@ -3838,6 +3865,8 @@ static void bnx2x_warpcore_enable_AN_KR(struct bnx2x_phy *phy, bnx2x_set_aer_mmd(params, phy); bnx2x_warpcore_enable_AN_KR2(phy, params, vars); + } else { + bnx2x_disable_kr2(params, vars, phy); } /* Enable Autoneg: only on the main lane */ @@ -4347,20 +4376,14 @@ static void bnx2x_warpcore_config_runtime(struct bnx2x_phy *phy, struct bnx2x *bp = params->bp; u32 serdes_net_if; u16 gp_status1 = 0, lnkup = 0, lnkup_kr = 0; - u16 lane = bnx2x_get_warpcore_lane(phy, params); vars->turn_to_run_wc_rt = vars->turn_to_run_wc_rt ? 0 : 1; if (!vars->turn_to_run_wc_rt) return; - /* Return if there is no link partner */ - if (!(bnx2x_warpcore_get_sigdet(phy, params))) { - DP(NETIF_MSG_LINK, "bnx2x_warpcore_get_sigdet false\n"); - return; - } - if (vars->rx_tx_asic_rst) { + u16 lane = bnx2x_get_warpcore_lane(phy, params); serdes_net_if = (REG_RD(bp, params->shmem_base + offsetof(struct shmem_region, dev_info. port_hw_config[params->port].default_cfg)) & @@ -4375,14 +4398,8 @@ static void bnx2x_warpcore_config_runtime(struct bnx2x_phy *phy, /*10G KR*/ lnkup_kr = (gp_status1 >> (12+lane)) & 0x1; - DP(NETIF_MSG_LINK, - "gp_status1 0x%x\n", gp_status1); - if (lnkup_kr || lnkup) { - vars->rx_tx_asic_rst = 0; - DP(NETIF_MSG_LINK, - "link up, rx_tx_asic_rst 0x%x\n", - vars->rx_tx_asic_rst); + vars->rx_tx_asic_rst = 0; } else { /* Reset the lane to see if link comes up.*/ bnx2x_warpcore_reset_lane(bp, phy, 1); @@ -4507,10 +4524,14 @@ static void bnx2x_warpcore_config_init(struct bnx2x_phy *phy, * enabled transmitter to avoid current leakage in case * no module is connected */ - if (bnx2x_is_sfp_module_plugged(phy, params)) - bnx2x_sfp_module_detection(phy, params); - else - bnx2x_sfp_e3_set_transmitter(params, phy, 1); + if ((params->loopback_mode == LOOPBACK_NONE) || + (params->loopback_mode == LOOPBACK_EXT)) { + if (bnx2x_is_sfp_module_plugged(phy, params)) + bnx2x_sfp_module_detection(phy, params); + else + bnx2x_sfp_e3_set_transmitter(params, + phy, 1); + } bnx2x_warpcore_config_sfi(phy, params); break; @@ -5757,6 +5778,11 @@ static int bnx2x_warpcore_read_status(struct bnx2x_phy *phy, rc = bnx2x_get_link_speed_duplex(phy, params, vars, link_up, gp_speed, duplex); + /* In case of KR link down, start up the recovering procedure */ + if ((!link_up) && (phy->media_type == ETH_PHY_KR) && + (!(phy->flags & FLAGS_WC_DUAL_MODE))) + vars->rx_tx_asic_rst = MAX_KR_LINK_RETRY; + DP(NETIF_MSG_LINK, "duplex %x flow_ctrl 0x%x link_status 0x%x\n", vars->duplex, vars->flow_ctrl, vars->link_status); return rc; @@ -6507,6 +6533,11 @@ static int bnx2x_link_initialize(struct link_params *params, params->phy[INT_PHY].config_init(phy, params, vars); } + /* Re-read this value in case it was changed inside config_init due to + * limitations of optic module + */ + vars->line_speed = params->phy[INT_PHY].req_line_speed; + /* Init external phy*/ if (non_ext_phy) { if (params->phy[INT_PHY].supported & @@ -8080,7 +8111,10 @@ static int bnx2x_get_edc_mode(struct bnx2x_phy *phy, if (copper_module_type & SFP_EEPROM_FC_TX_TECH_BITMASK_COPPER_ACTIVE) { DP(NETIF_MSG_LINK, "Active Copper cable detected\n"); - check_limiting_mode = 1; + if (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT) + *edc_mode = EDC_MODE_ACTIVE_DAC; + else + check_limiting_mode = 1; } else if (copper_module_type & SFP_EEPROM_FC_TX_TECH_BITMASK_COPPER_PASSIVE) { DP(NETIF_MSG_LINK, @@ -8555,6 +8589,7 @@ static void bnx2x_warpcore_set_limiting_mode(struct link_params *params, mode = MDIO_WC_REG_UC_INFO_B1_FIRMWARE_MODE_DEFAULT; break; case EDC_MODE_PASSIVE_DAC: + case EDC_MODE_ACTIVE_DAC: mode = MDIO_WC_REG_UC_INFO_B1_FIRMWARE_MODE_SFP_DAC; break; default: @@ -9730,32 +9765,41 @@ static int bnx2x_848xx_cmn_config_init(struct bnx2x_phy *phy, MDIO_AN_DEVAD, MDIO_AN_REG_8481_1000T_CTRL, an_1000_val); - /* set 100 speed advertisement */ - if ((phy->req_line_speed == SPEED_AUTO_NEG) && - (phy->speed_cap_mask & - (PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_FULL | - PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_HALF))) { - an_10_100_val |= (1<<7); - /* Enable autoneg and restart autoneg for legacy speeds */ - autoneg_val |= (1<<9 | 1<<12); - - if (phy->req_duplex == DUPLEX_FULL) + /* Set 10/100 speed advertisement */ + if (phy->req_line_speed == SPEED_AUTO_NEG) { + if (phy->speed_cap_mask & + PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_FULL) { + /* Enable autoneg and restart autoneg for legacy speeds + */ + autoneg_val |= (1<<9 | 1<<12); an_10_100_val |= (1<<8); - DP(NETIF_MSG_LINK, "Advertising 100M\n"); - } - /* set 10 speed advertisement */ - if (((phy->req_line_speed == SPEED_AUTO_NEG) && - (phy->speed_cap_mask & - (PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_FULL | - PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_HALF)) && - (phy->supported & - (SUPPORTED_10baseT_Half | - SUPPORTED_10baseT_Full)))) { - an_10_100_val |= (1<<5); - autoneg_val |= (1<<9 | 1<<12); - if (phy->req_duplex == DUPLEX_FULL) + DP(NETIF_MSG_LINK, "Advertising 100M-FD\n"); + } + + if (phy->speed_cap_mask & + PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_HALF) { + /* Enable autoneg and restart autoneg for legacy speeds + */ + autoneg_val |= (1<<9 | 1<<12); + an_10_100_val |= (1<<7); + DP(NETIF_MSG_LINK, "Advertising 100M-HD\n"); + } + + if ((phy->speed_cap_mask & + PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_FULL) && + (phy->supported & SUPPORTED_10baseT_Full)) { an_10_100_val |= (1<<6); - DP(NETIF_MSG_LINK, "Advertising 10M\n"); + autoneg_val |= (1<<9 | 1<<12); + DP(NETIF_MSG_LINK, "Advertising 10M-FD\n"); + } + + if ((phy->speed_cap_mask & + PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_HALF) && + (phy->supported & SUPPORTED_10baseT_Half)) { + an_10_100_val |= (1<<5); + autoneg_val |= (1<<9 | 1<<12); + DP(NETIF_MSG_LINK, "Advertising 10M-HD\n"); + } } /* Only 10/100 are allowed to work in FORCE mode */ @@ -13432,43 +13476,6 @@ static void bnx2x_sfp_tx_fault_detection(struct bnx2x_phy *phy, } } } -static void bnx2x_disable_kr2(struct link_params *params, - struct link_vars *vars, - struct bnx2x_phy *phy) -{ - struct bnx2x *bp = params->bp; - int i; - static struct bnx2x_reg_set reg_set[] = { - /* Step 1 - Program the TX/RX alignment markers */ - {MDIO_WC_DEVAD, MDIO_WC_REG_CL82_USERB1_TX_CTRL5, 0x7690}, - {MDIO_WC_DEVAD, MDIO_WC_REG_CL82_USERB1_TX_CTRL7, 0xe647}, - {MDIO_WC_DEVAD, MDIO_WC_REG_CL82_USERB1_TX_CTRL6, 0xc4f0}, - {MDIO_WC_DEVAD, MDIO_WC_REG_CL82_USERB1_TX_CTRL9, 0x7690}, - {MDIO_WC_DEVAD, MDIO_WC_REG_CL82_USERB1_RX_CTRL11, 0xe647}, - {MDIO_WC_DEVAD, MDIO_WC_REG_CL82_USERB1_RX_CTRL10, 0xc4f0}, - {MDIO_WC_DEVAD, MDIO_WC_REG_CL73_USERB0_CTRL, 0x000c}, - {MDIO_WC_DEVAD, MDIO_WC_REG_CL73_BAM_CTRL1, 0x6000}, - {MDIO_WC_DEVAD, MDIO_WC_REG_CL73_BAM_CTRL3, 0x0000}, - {MDIO_WC_DEVAD, MDIO_WC_REG_CL73_BAM_CODE_FIELD, 0x0002}, - {MDIO_WC_DEVAD, MDIO_WC_REG_ETA_CL73_OUI1, 0x0000}, - {MDIO_WC_DEVAD, MDIO_WC_REG_ETA_CL73_OUI2, 0x0af7}, - {MDIO_WC_DEVAD, MDIO_WC_REG_ETA_CL73_OUI3, 0x0af7}, - {MDIO_WC_DEVAD, MDIO_WC_REG_ETA_CL73_LD_BAM_CODE, 0x0002}, - {MDIO_WC_DEVAD, MDIO_WC_REG_ETA_CL73_LD_UD_CODE, 0x0000} - }; - DP(NETIF_MSG_LINK, "Disabling 20G-KR2\n"); - - for (i = 0; i < ARRAY_SIZE(reg_set); i++) - bnx2x_cl45_write(bp, phy, reg_set[i].devad, reg_set[i].reg, - reg_set[i].val); - vars->link_attr_sync &= ~LINK_ATTR_SYNC_KR2_ENABLE; - bnx2x_update_link_attr(params, vars->link_attr_sync); - - vars->check_kr2_recovery_cnt = CHECK_KR2_RECOVERY_CNT; - /* Restart AN on leading lane */ - bnx2x_warpcore_restart_AN_KR(phy, params); -} - static void bnx2x_kr2_recovery(struct link_params *params, struct link_vars *vars, struct bnx2x_phy *phy) @@ -13546,6 +13553,8 @@ static void bnx2x_check_kr2_wa(struct link_params *params, /* Disable KR2 on both lanes */ DP(NETIF_MSG_LINK, "BP=0x%x, NP=0x%x\n", base_page, next_page); bnx2x_disable_kr2(params, vars, phy); + /* Restart AN on leading lane */ + bnx2x_warpcore_restart_AN_KR(phy, params); return; } } diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c index a6704b55504..82b658d8c04 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c @@ -4703,6 +4703,14 @@ bool bnx2x_chk_parity_attn(struct bnx2x *bp, bool *global, bool print) attn.sig[3] = REG_RD(bp, MISC_REG_AEU_AFTER_INVERT_4_FUNC_0 + port*4); + /* Since MCP attentions can't be disabled inside the block, we need to + * read AEU registers to see whether they're currently disabled + */ + attn.sig[3] &= ((REG_RD(bp, + !port ? MISC_REG_AEU_ENABLE4_FUNC_0_OUT_0 + : MISC_REG_AEU_ENABLE4_FUNC_1_OUT_0) & + MISC_AEU_ENABLE_MCP_PRTY_BITS) | + ~MISC_AEU_ENABLE_MCP_PRTY_BITS); if (!CHIP_IS_E1x(bp)) attn.sig[4] = REG_RD(bp, @@ -5447,26 +5455,24 @@ static void bnx2x_timer(unsigned long data) if (IS_PF(bp) && !BP_NOMCP(bp)) { int mb_idx = BP_FW_MB_IDX(bp); - u32 drv_pulse; - u32 mcp_pulse; + u16 drv_pulse; + u16 mcp_pulse; ++bp->fw_drv_pulse_wr_seq; bp->fw_drv_pulse_wr_seq &= DRV_PULSE_SEQ_MASK; - /* TBD - add SYSTEM_TIME */ drv_pulse = bp->fw_drv_pulse_wr_seq; bnx2x_drv_pulse(bp); mcp_pulse = (SHMEM_RD(bp, func_mb[mb_idx].mcp_pulse_mb) & MCP_PULSE_SEQ_MASK); /* The delta between driver pulse and mcp response - * should be 1 (before mcp response) or 0 (after mcp response) + * should not get too big. If the MFW is more than 5 pulses + * behind, we should worry about it enough to generate an error + * log. */ - if ((drv_pulse != mcp_pulse) && - (drv_pulse != ((mcp_pulse + 1) & MCP_PULSE_SEQ_MASK))) { - /* someone lost a heartbeat... */ - BNX2X_ERR("drv_pulse (0x%x) != mcp_pulse (0x%x)\n", + if (((drv_pulse - mcp_pulse) & MCP_PULSE_SEQ_MASK) > 5) + BNX2X_ERR("MFW seems hanged: drv_pulse (0x%x) != mcp_pulse (0x%x)\n", drv_pulse, mcp_pulse); - } } if (bp->state == BNX2X_STATE_OPEN) diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c index 2604b6204ab..9ad012bdd91 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c @@ -1819,7 +1819,7 @@ bnx2x_get_vf_igu_cam_info(struct bnx2x *bp) fid = GET_FIELD((val), IGU_REG_MAPPING_MEMORY_FID); if (fid & IGU_FID_ENCODE_IS_PF) current_pf = fid & IGU_FID_PF_NUM_MASK; - else if (current_pf == BP_ABS_FUNC(bp)) + else if (current_pf == BP_FUNC(bp)) bnx2x_vf_set_igu_info(bp, sb_id, (fid & IGU_FID_VF_NUM_MASK)); DP(BNX2X_MSG_IOV, "%s[%d], igu_sb_id=%d, msix=%d\n", @@ -3180,6 +3180,7 @@ int bnx2x_enable_sriov(struct bnx2x *bp) /* set local queue arrays */ vf->vfqs = &bp->vfdb->vfqs[qcount]; qcount += vf_sb_count(vf); + bnx2x_iov_static_resc(bp, vf); } /* prepare msix vectors in VF configuration space */ @@ -3187,6 +3188,8 @@ int bnx2x_enable_sriov(struct bnx2x *bp) bnx2x_pretend_func(bp, HW_VF_HANDLE(bp, vf_idx)); REG_WR(bp, PCICFG_OFFSET + GRC_CONFIG_REG_VF_MSIX_CONTROL, num_vf_queues); + DP(BNX2X_MSG_IOV, "set msix vec num in VF %d cfg space to %d\n", + vf_idx, num_vf_queues); } bnx2x_pretend_func(bp, BP_ABS_FUNC(bp)); diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c index 6cfb8873245..da16953eb2e 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c @@ -1765,28 +1765,28 @@ static void bnx2x_vf_mbx_request(struct bnx2x *bp, struct bnx2x_virtf *vf, switch (mbx->first_tlv.tl.type) { case CHANNEL_TLV_ACQUIRE: bnx2x_vf_mbx_acquire(bp, vf, mbx); - break; + return; case CHANNEL_TLV_INIT: bnx2x_vf_mbx_init_vf(bp, vf, mbx); - break; + return; case CHANNEL_TLV_SETUP_Q: bnx2x_vf_mbx_setup_q(bp, vf, mbx); - break; + return; case CHANNEL_TLV_SET_Q_FILTERS: bnx2x_vf_mbx_set_q_filters(bp, vf, mbx); - break; + return; case CHANNEL_TLV_TEARDOWN_Q: bnx2x_vf_mbx_teardown_q(bp, vf, mbx); - break; + return; case CHANNEL_TLV_CLOSE: bnx2x_vf_mbx_close_vf(bp, vf, mbx); - break; + return; case CHANNEL_TLV_RELEASE: bnx2x_vf_mbx_release_vf(bp, vf, mbx); - break; + return; case CHANNEL_TLV_UPDATE_RSS: bnx2x_vf_mbx_update_rss(bp, vf, mbx); - break; + return; } } else { @@ -1802,26 +1802,24 @@ static void bnx2x_vf_mbx_request(struct bnx2x *bp, struct bnx2x_virtf *vf, for (i = 0; i < 20; i++) DP_CONT(BNX2X_MSG_IOV, "%x ", mbx->msg->req.tlv_buf_size.tlv_buffer[i]); + } - /* test whether we can respond to the VF (do we have an address - * for it?) - */ - if (vf->state == VF_ACQUIRED || vf->state == VF_ENABLED) { - /* mbx_resp uses the op_rc of the VF */ - vf->op_rc = PFVF_STATUS_NOT_SUPPORTED; + /* can we respond to VF (do we have an address for it?) */ + if (vf->state == VF_ACQUIRED || vf->state == VF_ENABLED) { + /* mbx_resp uses the op_rc of the VF */ + vf->op_rc = PFVF_STATUS_NOT_SUPPORTED; - /* notify the VF that we do not support this request */ - bnx2x_vf_mbx_resp(bp, vf); - } else { - /* can't send a response since this VF is unknown to us - * just ack the FW to release the mailbox and unlock - * the channel. - */ - storm_memset_vf_mbx_ack(bp, vf->abs_vfid); - mmiowb(); - bnx2x_unlock_vf_pf_channel(bp, vf, - mbx->first_tlv.tl.type); - } + /* notify the VF that we do not support this request */ + bnx2x_vf_mbx_resp(bp, vf); + } else { + /* can't send a response since this VF is unknown to us + * just ack the FW to release the mailbox and unlock + * the channel. + */ + storm_memset_vf_mbx_ack(bp, vf->abs_vfid); + /* Firmware ack should be written before unlocking channel */ + mmiowb(); + bnx2x_unlock_vf_pf_channel(bp, vf, mbx->first_tlv.tl.type); } } diff --git a/drivers/net/ethernet/emulex/benet/be.h b/drivers/net/ethernet/emulex/benet/be.h index ace5050dba3..db020230bd0 100644 --- a/drivers/net/ethernet/emulex/benet/be.h +++ b/drivers/net/ethernet/emulex/benet/be.h @@ -88,6 +88,7 @@ static inline char *nic_name(struct pci_dev *pdev) #define BE_MIN_MTU 256 #define BE_NUM_VLANS_SUPPORTED 64 +#define BE_UMC_NUM_VLANS_SUPPORTED 15 #define BE_MAX_EQD 96u #define BE_MAX_TX_FRAG_COUNT 30 @@ -333,6 +334,7 @@ enum vf_state { #define BE_FLAGS_LINK_STATUS_INIT 1 #define BE_FLAGS_WORKER_SCHEDULED (1 << 3) +#define BE_FLAGS_VLAN_PROMISC (1 << 4) #define BE_FLAGS_NAPI_ENABLED (1 << 9) #define BE_UC_PMAC_COUNT 30 #define BE_VF_UC_PMAC_COUNT 2 diff --git a/drivers/net/ethernet/emulex/benet/be_cmds.c b/drivers/net/ethernet/emulex/benet/be_cmds.c index 1ab5dab11ef..bd0e0c0bbcd 100644 --- a/drivers/net/ethernet/emulex/benet/be_cmds.c +++ b/drivers/net/ethernet/emulex/benet/be_cmds.c @@ -180,6 +180,9 @@ static int be_mcc_compl_process(struct be_adapter *adapter, dev_err(&adapter->pdev->dev, "opcode %d-%d failed:status %d-%d\n", opcode, subsystem, compl_status, extd_status); + + if (extd_status == MCC_ADDL_STS_INSUFFICIENT_RESOURCES) + return extd_status; } } done: @@ -1812,6 +1815,12 @@ int be_cmd_rx_filter(struct be_adapter *adapter, u32 flags, u32 value) } else if (flags & IFF_ALLMULTI) { req->if_flags_mask = req->if_flags = cpu_to_le32(BE_IF_FLAGS_MCAST_PROMISCUOUS); + } else if (flags & BE_FLAGS_VLAN_PROMISC) { + req->if_flags_mask = cpu_to_le32(BE_IF_FLAGS_VLAN_PROMISCUOUS); + + if (value == ON) + req->if_flags = + cpu_to_le32(BE_IF_FLAGS_VLAN_PROMISCUOUS); } else { struct netdev_hw_addr *ha; int i = 0; diff --git a/drivers/net/ethernet/emulex/benet/be_cmds.h b/drivers/net/ethernet/emulex/benet/be_cmds.h index d026226db88..108ca8abf0a 100644 --- a/drivers/net/ethernet/emulex/benet/be_cmds.h +++ b/drivers/net/ethernet/emulex/benet/be_cmds.h @@ -60,6 +60,8 @@ enum { MCC_STATUS_NOT_SUPPORTED = 66 }; +#define MCC_ADDL_STS_INSUFFICIENT_RESOURCES 0x16 + #define CQE_STATUS_COMPL_MASK 0xFFFF #define CQE_STATUS_COMPL_SHIFT 0 /* bits 0 - 15 */ #define CQE_STATUS_EXTD_MASK 0xFFFF @@ -1791,7 +1793,7 @@ struct be_nic_res_desc { u8 acpi_params; u8 wol_param; u16 rsvd7; - u32 rsvd8[3]; + u32 rsvd8[7]; } __packed; struct be_cmd_req_get_func_config { diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c index 100b528b9bd..2c38cc40211 100644 --- a/drivers/net/ethernet/emulex/benet/be_main.c +++ b/drivers/net/ethernet/emulex/benet/be_main.c @@ -855,11 +855,11 @@ static struct sk_buff *be_xmit_workarounds(struct be_adapter *adapter, unsigned int eth_hdr_len; struct iphdr *ip; - /* Lancer ASIC has a bug wherein packets that are 32 bytes or less + /* Lancer, SH-R ASICs have a bug wherein Packets that are 32 bytes or less * may cause a transmit stall on that port. So the work-around is to - * pad such packets to a 36-byte length. + * pad short packets (<= 32 bytes) to a 36-byte length. */ - if (unlikely(lancer_chip(adapter) && skb->len <= 32)) { + if (unlikely(!BEx_chip(adapter) && skb->len <= 32)) { if (skb_padto(skb, 36)) goto tx_drop; skb->len = 36; @@ -1013,18 +1013,40 @@ static int be_vid_config(struct be_adapter *adapter) status = be_cmd_vlan_config(adapter, adapter->if_handle, vids, num, 1, 0); - /* Set to VLAN promisc mode as setting VLAN filter failed */ if (status) { - dev_info(&adapter->pdev->dev, "Exhausted VLAN HW filters.\n"); - dev_info(&adapter->pdev->dev, "Disabling HW VLAN filtering.\n"); - goto set_vlan_promisc; + /* Set to VLAN promisc mode as setting VLAN filter failed */ + if (status == MCC_ADDL_STS_INSUFFICIENT_RESOURCES) + goto set_vlan_promisc; + dev_err(&adapter->pdev->dev, + "Setting HW VLAN filtering failed.\n"); + } else { + if (adapter->flags & BE_FLAGS_VLAN_PROMISC) { + /* hw VLAN filtering re-enabled. */ + status = be_cmd_rx_filter(adapter, + BE_FLAGS_VLAN_PROMISC, OFF); + if (!status) { + dev_info(&adapter->pdev->dev, + "Disabling VLAN Promiscuous mode.\n"); + adapter->flags &= ~BE_FLAGS_VLAN_PROMISC; + dev_info(&adapter->pdev->dev, + "Re-Enabling HW VLAN filtering\n"); + } + } } return status; set_vlan_promisc: - status = be_cmd_vlan_config(adapter, adapter->if_handle, - NULL, 0, 1, 1); + dev_warn(&adapter->pdev->dev, "Exhausted VLAN HW filters.\n"); + + status = be_cmd_rx_filter(adapter, BE_FLAGS_VLAN_PROMISC, ON); + if (!status) { + dev_info(&adapter->pdev->dev, "Enable VLAN Promiscuous mode\n"); + dev_info(&adapter->pdev->dev, "Disabling HW VLAN filtering\n"); + adapter->flags |= BE_FLAGS_VLAN_PROMISC; + } else + dev_err(&adapter->pdev->dev, + "Failed to enable VLAN Promiscuous mode.\n"); return status; } @@ -1033,10 +1055,6 @@ static int be_vlan_add_vid(struct net_device *netdev, __be16 proto, u16 vid) struct be_adapter *adapter = netdev_priv(netdev); int status = 0; - if (!lancer_chip(adapter) && !be_physfn(adapter)) { - status = -EINVAL; - goto ret; - } /* Packets with VID 0 are always received by Lancer by default */ if (lancer_chip(adapter) && vid == 0) @@ -1059,11 +1077,6 @@ static int be_vlan_rem_vid(struct net_device *netdev, __be16 proto, u16 vid) struct be_adapter *adapter = netdev_priv(netdev); int status = 0; - if (!lancer_chip(adapter) && !be_physfn(adapter)) { - status = -EINVAL; - goto ret; - } - /* Packets with VID 0 are always received by Lancer by default */ if (lancer_chip(adapter) && vid == 0) goto ret; @@ -1188,8 +1201,8 @@ static int be_get_vf_config(struct net_device *netdev, int vf, vi->vf = vf; vi->tx_rate = vf_cfg->tx_rate; - vi->vlan = vf_cfg->vlan_tag; - vi->qos = 0; + vi->vlan = vf_cfg->vlan_tag & VLAN_VID_MASK; + vi->qos = vf_cfg->vlan_tag >> VLAN_PRIO_SHIFT; memcpy(&vi->mac, vf_cfg->mac_addr, ETH_ALEN); return 0; @@ -1199,28 +1212,29 @@ static int be_set_vf_vlan(struct net_device *netdev, int vf, u16 vlan, u8 qos) { struct be_adapter *adapter = netdev_priv(netdev); + struct be_vf_cfg *vf_cfg = &adapter->vf_cfg[vf]; int status = 0; if (!sriov_enabled(adapter)) return -EPERM; - if (vf >= adapter->num_vfs || vlan > 4095) + if (vf >= adapter->num_vfs || vlan > 4095 || qos > 7) return -EINVAL; - if (vlan) { - if (adapter->vf_cfg[vf].vlan_tag != vlan) { + if (vlan || qos) { + vlan |= qos << VLAN_PRIO_SHIFT; + if (vf_cfg->vlan_tag != vlan) { /* If this is new value, program it. Else skip. */ - adapter->vf_cfg[vf].vlan_tag = vlan; - - status = be_cmd_set_hsw_config(adapter, vlan, - vf + 1, adapter->vf_cfg[vf].if_handle, 0); + vf_cfg->vlan_tag = vlan; + status = be_cmd_set_hsw_config(adapter, vlan, vf + 1, + vf_cfg->if_handle, 0); } } else { /* Reset Transparent Vlan Tagging. */ - adapter->vf_cfg[vf].vlan_tag = 0; - vlan = adapter->vf_cfg[vf].def_vid; + vf_cfg->vlan_tag = 0; + vlan = vf_cfg->def_vid; status = be_cmd_set_hsw_config(adapter, vlan, vf + 1, - adapter->vf_cfg[vf].if_handle, 0); + vf_cfg->if_handle, 0); } @@ -2963,6 +2977,8 @@ static void BEx_get_resources(struct be_adapter *adapter, if (adapter->function_mode & FLEX10_MODE) res->max_vlans = BE_NUM_VLANS_SUPPORTED/8; + else if (adapter->function_mode & UMC_ENABLED) + res->max_vlans = BE_UMC_NUM_VLANS_SUPPORTED; else res->max_vlans = BE_NUM_VLANS_SUPPORTED; res->max_mcast_mac = BE_MAX_MC; diff --git a/drivers/net/ethernet/freescale/gianfar_ptp.c b/drivers/net/ethernet/freescale/gianfar_ptp.c index 098f133908a..e006a09ba89 100644 --- a/drivers/net/ethernet/freescale/gianfar_ptp.c +++ b/drivers/net/ethernet/freescale/gianfar_ptp.c @@ -452,7 +452,9 @@ static int gianfar_ptp_probe(struct platform_device *dev) err = -ENODEV; etsects->caps = ptp_gianfar_caps; - etsects->cksel = DEFAULT_CKSEL; + + if (get_of_u32(node, "fsl,cksel", &etsects->cksel)) + etsects->cksel = DEFAULT_CKSEL; if (get_of_u32(node, "fsl,tclk-period", &etsects->tclk_period) || get_of_u32(node, "fsl,tmr-prsc", &etsects->tmr_prsc) || diff --git a/drivers/net/ethernet/intel/i40e/i40e_adminq.c b/drivers/net/ethernet/intel/i40e/i40e_adminq.c index 0c524fa9f81..cfef7fc32cd 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_adminq.c +++ b/drivers/net/ethernet/intel/i40e/i40e_adminq.c @@ -701,8 +701,7 @@ i40e_status i40e_asq_send_command(struct i40e_hw *hw, details = I40E_ADMINQ_DETAILS(hw->aq.asq, hw->aq.asq.next_to_use); if (cmd_details) { - memcpy(details, cmd_details, - sizeof(struct i40e_asq_cmd_details)); + *details = *cmd_details; /* If the cmd_details are defined copy the cookie. The * cpu_to_le32 is not needed here because the data is ignored @@ -760,7 +759,7 @@ i40e_status i40e_asq_send_command(struct i40e_hw *hw, desc_on_ring = I40E_ADMINQ_DESC(hw->aq.asq, hw->aq.asq.next_to_use); /* if the desc is available copy the temp desc to the right place */ - memcpy(desc_on_ring, desc, sizeof(struct i40e_aq_desc)); + *desc_on_ring = *desc; /* if buff is not NULL assume indirect command */ if (buff != NULL) { @@ -807,7 +806,7 @@ i40e_status i40e_asq_send_command(struct i40e_hw *hw, /* if ready, copy the desc back to temp */ if (i40e_asq_done(hw)) { - memcpy(desc, desc_on_ring, sizeof(struct i40e_aq_desc)); + *desc = *desc_on_ring; if (buff != NULL) memcpy(buff, dma_buff->va, buff_size); retval = le16_to_cpu(desc->retval); diff --git a/drivers/net/ethernet/intel/i40e/i40e_common.c b/drivers/net/ethernet/intel/i40e/i40e_common.c index c21df7bc3b1..1e4ea134975 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_common.c +++ b/drivers/net/ethernet/intel/i40e/i40e_common.c @@ -507,7 +507,7 @@ i40e_status i40e_aq_get_link_info(struct i40e_hw *hw, /* save link status information */ if (link) - memcpy(link, hw_link_info, sizeof(struct i40e_link_status)); + *link = *hw_link_info; /* flag cleared so helper functions don't call AQ again */ hw->phy.get_link_info = false; diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c index 601d482694e..221aa479501 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_main.c +++ b/drivers/net/ethernet/intel/i40e/i40e_main.c @@ -101,10 +101,10 @@ int i40e_allocate_dma_mem_d(struct i40e_hw *hw, struct i40e_dma_mem *mem, mem->size = ALIGN(size, alignment); mem->va = dma_zalloc_coherent(&pf->pdev->dev, mem->size, &mem->pa, GFP_KERNEL); - if (mem->va) - return 0; + if (!mem->va) + return -ENOMEM; - return -ENOMEM; + return 0; } /** @@ -136,10 +136,10 @@ int i40e_allocate_virt_mem_d(struct i40e_hw *hw, struct i40e_virt_mem *mem, mem->size = size; mem->va = kzalloc(size, GFP_KERNEL); - if (mem->va) - return 0; + if (!mem->va) + return -ENOMEM; - return -ENOMEM; + return 0; } /** @@ -174,8 +174,7 @@ static int i40e_get_lump(struct i40e_pf *pf, struct i40e_lump_tracking *pile, u16 needed, u16 id) { int ret = -ENOMEM; - int i = 0; - int j = 0; + int i, j; if (!pile || needed == 0 || id >= I40E_PILE_VALID_BIT) { dev_info(&pf->pdev->dev, @@ -186,7 +185,7 @@ static int i40e_get_lump(struct i40e_pf *pf, struct i40e_lump_tracking *pile, /* start the linear search with an imperfect hint */ i = pile->search_hint; - while (i < pile->num_entries && ret < 0) { + while (i < pile->num_entries) { /* skip already allocated entries */ if (pile->list[i] & I40E_PILE_VALID_BIT) { i++; @@ -205,6 +204,7 @@ static int i40e_get_lump(struct i40e_pf *pf, struct i40e_lump_tracking *pile, pile->list[i+j] = id | I40E_PILE_VALID_BIT; ret = i; pile->search_hint = i + j; + break; } else { /* not enough, so skip over it and continue looking */ i += j; @@ -1388,7 +1388,7 @@ int i40e_sync_vsi_filters(struct i40e_vsi *vsi) bool add_happened = false; int filter_list_len = 0; u32 changed_flags = 0; - i40e_status ret = 0; + i40e_status aq_ret = 0; struct i40e_pf *pf; int num_add = 0; int num_del = 0; @@ -1449,28 +1449,28 @@ int i40e_sync_vsi_filters(struct i40e_vsi *vsi) /* flush a full buffer */ if (num_del == filter_list_len) { - ret = i40e_aq_remove_macvlan(&pf->hw, + aq_ret = i40e_aq_remove_macvlan(&pf->hw, vsi->seid, del_list, num_del, NULL); num_del = 0; memset(del_list, 0, sizeof(*del_list)); - if (ret) + if (aq_ret) dev_info(&pf->pdev->dev, "ignoring delete macvlan error, err %d, aq_err %d while flushing a full buffer\n", - ret, + aq_ret, pf->hw.aq.asq_last_status); } } if (num_del) { - ret = i40e_aq_remove_macvlan(&pf->hw, vsi->seid, + aq_ret = i40e_aq_remove_macvlan(&pf->hw, vsi->seid, del_list, num_del, NULL); num_del = 0; - if (ret) + if (aq_ret) dev_info(&pf->pdev->dev, "ignoring delete macvlan error, err %d, aq_err %d\n", - ret, pf->hw.aq.asq_last_status); + aq_ret, pf->hw.aq.asq_last_status); } kfree(del_list); @@ -1515,32 +1515,30 @@ int i40e_sync_vsi_filters(struct i40e_vsi *vsi) /* flush a full buffer */ if (num_add == filter_list_len) { - ret = i40e_aq_add_macvlan(&pf->hw, - vsi->seid, - add_list, - num_add, - NULL); + aq_ret = i40e_aq_add_macvlan(&pf->hw, vsi->seid, + add_list, num_add, + NULL); num_add = 0; - if (ret) + if (aq_ret) break; memset(add_list, 0, sizeof(*add_list)); } } if (num_add) { - ret = i40e_aq_add_macvlan(&pf->hw, vsi->seid, - add_list, num_add, NULL); + aq_ret = i40e_aq_add_macvlan(&pf->hw, vsi->seid, + add_list, num_add, NULL); num_add = 0; } kfree(add_list); add_list = NULL; - if (add_happened && (!ret)) { + if (add_happened && (!aq_ret)) { /* do nothing */; - } else if (add_happened && (ret)) { + } else if (add_happened && (aq_ret)) { dev_info(&pf->pdev->dev, "add filter failed, err %d, aq_err %d\n", - ret, pf->hw.aq.asq_last_status); + aq_ret, pf->hw.aq.asq_last_status); if ((pf->hw.aq.asq_last_status == I40E_AQ_RC_ENOSPC) && !test_bit(__I40E_FILTER_OVERFLOW_PROMISC, &vsi->state)) { @@ -1556,28 +1554,27 @@ int i40e_sync_vsi_filters(struct i40e_vsi *vsi) if (changed_flags & IFF_ALLMULTI) { bool cur_multipromisc; cur_multipromisc = !!(vsi->current_netdev_flags & IFF_ALLMULTI); - ret = i40e_aq_set_vsi_multicast_promiscuous(&vsi->back->hw, - vsi->seid, - cur_multipromisc, - NULL); - if (ret) + aq_ret = i40e_aq_set_vsi_multicast_promiscuous(&vsi->back->hw, + vsi->seid, + cur_multipromisc, + NULL); + if (aq_ret) dev_info(&pf->pdev->dev, "set multi promisc failed, err %d, aq_err %d\n", - ret, pf->hw.aq.asq_last_status); + aq_ret, pf->hw.aq.asq_last_status); } if ((changed_flags & IFF_PROMISC) || promisc_forced_on) { bool cur_promisc; cur_promisc = (!!(vsi->current_netdev_flags & IFF_PROMISC) || test_bit(__I40E_FILTER_OVERFLOW_PROMISC, &vsi->state)); - ret = i40e_aq_set_vsi_unicast_promiscuous(&vsi->back->hw, - vsi->seid, - cur_promisc, - NULL); - if (ret) + aq_ret = i40e_aq_set_vsi_unicast_promiscuous(&vsi->back->hw, + vsi->seid, + cur_promisc, NULL); + if (aq_ret) dev_info(&pf->pdev->dev, "set uni promisc failed, err %d, aq_err %d\n", - ret, pf->hw.aq.asq_last_status); + aq_ret, pf->hw.aq.asq_last_status); } clear_bit(__I40E_CONFIG_BUSY, &vsi->state); @@ -1790,6 +1787,8 @@ int i40e_vsi_add_vlan(struct i40e_vsi *vsi, s16 vid) * i40e_vsi_kill_vlan - Remove vsi membership for given vlan * @vsi: the vsi being configured * @vid: vlan id to be removed (0 = untagged only , -1 = any) + * + * Return: 0 on success or negative otherwise **/ int i40e_vsi_kill_vlan(struct i40e_vsi *vsi, s16 vid) { @@ -1863,37 +1862,39 @@ int i40e_vsi_kill_vlan(struct i40e_vsi *vsi, s16 vid) * i40e_vlan_rx_add_vid - Add a vlan id filter to HW offload * @netdev: network interface to be adjusted * @vid: vlan id to be added + * + * net_device_ops implementation for adding vlan ids **/ static int i40e_vlan_rx_add_vid(struct net_device *netdev, __always_unused __be16 proto, u16 vid) { struct i40e_netdev_priv *np = netdev_priv(netdev); struct i40e_vsi *vsi = np->vsi; - int ret; + int ret = 0; if (vid > 4095) - return 0; + return -EINVAL; + + netdev_info(netdev, "adding %pM vid=%d\n", netdev->dev_addr, vid); - netdev_info(vsi->netdev, "adding %pM vid=%d\n", - netdev->dev_addr, vid); /* If the network stack called us with vid = 0, we should * indicate to i40e_vsi_add_vlan() that we want to receive * any traffic (i.e. with any vlan tag, or untagged) */ ret = i40e_vsi_add_vlan(vsi, vid ? vid : I40E_VLAN_ANY); - if (!ret) { - if (vid < VLAN_N_VID) - set_bit(vid, vsi->active_vlans); - } + if (!ret && (vid < VLAN_N_VID)) + set_bit(vid, vsi->active_vlans); - return 0; + return ret; } /** * i40e_vlan_rx_kill_vid - Remove a vlan id filter from HW offload * @netdev: network interface to be adjusted * @vid: vlan id to be removed + * + * net_device_ops implementation for adding vlan ids **/ static int i40e_vlan_rx_kill_vid(struct net_device *netdev, __always_unused __be16 proto, u16 vid) @@ -1901,15 +1902,16 @@ static int i40e_vlan_rx_kill_vid(struct net_device *netdev, struct i40e_netdev_priv *np = netdev_priv(netdev); struct i40e_vsi *vsi = np->vsi; - netdev_info(vsi->netdev, "removing %pM vid=%d\n", - netdev->dev_addr, vid); + netdev_info(netdev, "removing %pM vid=%d\n", netdev->dev_addr, vid); + /* return code is ignored as there is nothing a user * can do about failure to remove and a log message was - * already printed from another function + * already printed from the other function */ i40e_vsi_kill_vlan(vsi, vid); clear_bit(vid, vsi->active_vlans); + return 0; } @@ -1936,10 +1938,10 @@ static void i40e_restore_vlan(struct i40e_vsi *vsi) * @vsi: the vsi being adjusted * @vid: the vlan id to set as a PVID **/ -i40e_status i40e_vsi_add_pvid(struct i40e_vsi *vsi, u16 vid) +int i40e_vsi_add_pvid(struct i40e_vsi *vsi, u16 vid) { struct i40e_vsi_context ctxt; - i40e_status ret; + i40e_status aq_ret; vsi->info.valid_sections = cpu_to_le16(I40E_AQ_VSI_PROP_VLAN_VALID); vsi->info.pvid = cpu_to_le16(vid); @@ -1948,14 +1950,15 @@ i40e_status i40e_vsi_add_pvid(struct i40e_vsi *vsi, u16 vid) ctxt.seid = vsi->seid; memcpy(&ctxt.info, &vsi->info, sizeof(vsi->info)); - ret = i40e_aq_update_vsi_params(&vsi->back->hw, &ctxt, NULL); - if (ret) { + aq_ret = i40e_aq_update_vsi_params(&vsi->back->hw, &ctxt, NULL); + if (aq_ret) { dev_info(&vsi->back->pdev->dev, "%s: update vsi failed, aq_err=%d\n", __func__, vsi->back->hw.aq.asq_last_status); + return -ENOENT; } - return ret; + return 0; } /** @@ -3326,7 +3329,8 @@ static void i40e_pf_unquiesce_all_vsi(struct i40e_pf *pf) **/ static u8 i40e_dcb_get_num_tc(struct i40e_dcbx_config *dcbcfg) { - int num_tc = 0, i; + u8 num_tc = 0; + int i; /* Scan the ETS Config Priority Table to find * traffic class enabled for a given priority @@ -3341,9 +3345,7 @@ static u8 i40e_dcb_get_num_tc(struct i40e_dcbx_config *dcbcfg) /* Traffic class index starts from zero so * increment to return the actual count */ - num_tc++; - - return num_tc; + return num_tc + 1; } /** @@ -3451,28 +3453,27 @@ static int i40e_vsi_get_bw_info(struct i40e_vsi *vsi) struct i40e_aqc_query_vsi_bw_config_resp bw_config = {0}; struct i40e_pf *pf = vsi->back; struct i40e_hw *hw = &pf->hw; + i40e_status aq_ret; u32 tc_bw_max; - int ret; int i; /* Get the VSI level BW configuration */ - ret = i40e_aq_query_vsi_bw_config(hw, vsi->seid, &bw_config, NULL); - if (ret) { + aq_ret = i40e_aq_query_vsi_bw_config(hw, vsi->seid, &bw_config, NULL); + if (aq_ret) { dev_info(&pf->pdev->dev, "couldn't get pf vsi bw config, err %d, aq_err %d\n", - ret, pf->hw.aq.asq_last_status); - return ret; + aq_ret, pf->hw.aq.asq_last_status); + return -EINVAL; } /* Get the VSI level BW configuration per TC */ - ret = i40e_aq_query_vsi_ets_sla_config(hw, vsi->seid, - &bw_ets_config, - NULL); - if (ret) { + aq_ret = i40e_aq_query_vsi_ets_sla_config(hw, vsi->seid, &bw_ets_config, + NULL); + if (aq_ret) { dev_info(&pf->pdev->dev, "couldn't get pf vsi ets bw config, err %d, aq_err %d\n", - ret, pf->hw.aq.asq_last_status); - return ret; + aq_ret, pf->hw.aq.asq_last_status); + return -EINVAL; } if (bw_config.tc_valid_bits != bw_ets_config.tc_valid_bits) { @@ -3494,7 +3495,8 @@ static int i40e_vsi_get_bw_info(struct i40e_vsi *vsi) /* 3 bits out of 4 for each TC */ vsi->bw_ets_max_quanta[i] = (u8)((tc_bw_max >> (i*4)) & 0x7); } - return ret; + + return 0; } /** @@ -3505,30 +3507,30 @@ static int i40e_vsi_get_bw_info(struct i40e_vsi *vsi) * * Returns 0 on success, negative value on failure **/ -static int i40e_vsi_configure_bw_alloc(struct i40e_vsi *vsi, - u8 enabled_tc, +static int i40e_vsi_configure_bw_alloc(struct i40e_vsi *vsi, u8 enabled_tc, u8 *bw_share) { struct i40e_aqc_configure_vsi_tc_bw_data bw_data; - int i, ret = 0; + i40e_status aq_ret; + int i; bw_data.tc_valid_bits = enabled_tc; for (i = 0; i < I40E_MAX_TRAFFIC_CLASS; i++) bw_data.tc_bw_credits[i] = bw_share[i]; - ret = i40e_aq_config_vsi_tc_bw(&vsi->back->hw, vsi->seid, - &bw_data, NULL); - if (ret) { + aq_ret = i40e_aq_config_vsi_tc_bw(&vsi->back->hw, vsi->seid, &bw_data, + NULL); + if (aq_ret) { dev_info(&vsi->back->pdev->dev, "%s: AQ command Config VSI BW allocation per TC failed = %d\n", __func__, vsi->back->hw.aq.asq_last_status); - return ret; + return -EINVAL; } for (i = 0; i < I40E_MAX_TRAFFIC_CLASS; i++) vsi->info.qs_handle[i] = bw_data.qs_handles[i]; - return ret; + return 0; } /** diff --git a/drivers/net/ethernet/intel/igb/igb_ethtool.c b/drivers/net/ethernet/intel/igb/igb_ethtool.c index 48cbc833b05..86d51429a18 100644 --- a/drivers/net/ethernet/intel/igb/igb_ethtool.c +++ b/drivers/net/ethernet/intel/igb/igb_ethtool.c @@ -1607,6 +1607,9 @@ static int igb_integrated_phy_loopback(struct igb_adapter *adapter) igb_write_phy_reg(hw, I347AT4_PAGE_SELECT, 0); igb_write_phy_reg(hw, PHY_CONTROL, 0x4140); } + } else if (hw->phy.type == e1000_phy_82580) { + /* enable MII loopback */ + igb_write_phy_reg(hw, I82580_PHY_LBK_CTRL, 0x8041); } /* add small delay to avoid loopback test failure */ diff --git a/drivers/net/ethernet/marvell/skge.c b/drivers/net/ethernet/marvell/skge.c index 1a9c4f6269e..ecc7f7b696b 100644 --- a/drivers/net/ethernet/marvell/skge.c +++ b/drivers/net/ethernet/marvell/skge.c @@ -3086,13 +3086,16 @@ static struct sk_buff *skge_rx_get(struct net_device *dev, PCI_DMA_FROMDEVICE); skge_rx_reuse(e, skge->rx_buf_size); } else { + struct skge_element ee; struct sk_buff *nskb; nskb = netdev_alloc_skb_ip_align(dev, skge->rx_buf_size); if (!nskb) goto resubmit; - skb = e->skb; + ee = *e; + + skb = ee.skb; prefetch(skb->data); if (skge_rx_setup(skge, e, nskb, skge->rx_buf_size) < 0) { @@ -3101,8 +3104,8 @@ static struct sk_buff *skge_rx_get(struct net_device *dev, } pci_unmap_single(skge->hw->pdev, - dma_unmap_addr(e, mapaddr), - dma_unmap_len(e, maplen), + dma_unmap_addr(&ee, mapaddr), + dma_unmap_len(&ee, maplen), PCI_DMA_FROMDEVICE); } diff --git a/drivers/net/ethernet/moxa/moxart_ether.c b/drivers/net/ethernet/moxa/moxart_ether.c index 83c2091c9c2..bd1a2d2bc2a 100644 --- a/drivers/net/ethernet/moxa/moxart_ether.c +++ b/drivers/net/ethernet/moxa/moxart_ether.c @@ -543,7 +543,7 @@ static const struct of_device_id moxart_mac_match[] = { { } }; -struct __initdata platform_driver moxart_mac_driver = { +static struct platform_driver moxart_mac_driver = { .probe = moxart_mac_probe, .remove = moxart_remove, .driver = { diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c index 4d7ad0074d1..ebe4c86e523 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c @@ -1794,3 +1794,11 @@ const struct ethtool_ops qlcnic_sriov_vf_ethtool_ops = { .set_msglevel = qlcnic_set_msglevel, .get_msglevel = qlcnic_get_msglevel, }; + +const struct ethtool_ops qlcnic_ethtool_failed_ops = { + .get_settings = qlcnic_get_settings, + .get_drvinfo = qlcnic_get_drvinfo, + .set_msglevel = qlcnic_set_msglevel, + .get_msglevel = qlcnic_get_msglevel, + .set_dump = qlcnic_set_dump, +}; diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c index c4c5023e1fd..21d00a0449a 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c @@ -431,6 +431,9 @@ static void qlcnic_82xx_cancel_idc_work(struct qlcnic_adapter *adapter) while (test_and_set_bit(__QLCNIC_RESETTING, &adapter->state)) usleep_range(10000, 11000); + if (!adapter->fw_work.work.func) + return; + cancel_delayed_work_sync(&adapter->fw_work); } @@ -2275,8 +2278,9 @@ qlcnic_probe(struct pci_dev *pdev, const struct pci_device_id *ent) adapter->portnum = adapter->ahw->pci_func; err = qlcnic_start_firmware(adapter); if (err) { - dev_err(&pdev->dev, "Loading fw failed.Please Reboot\n"); - goto err_out_free_hw; + dev_err(&pdev->dev, "Loading fw failed.Please Reboot\n" + "\t\tIf reboot doesn't help, try flashing the card\n"); + goto err_out_maintenance_mode; } qlcnic_get_multiq_capability(adapter); @@ -2408,6 +2412,22 @@ err_out_disable_pdev: pci_set_drvdata(pdev, NULL); pci_disable_device(pdev); return err; + +err_out_maintenance_mode: + netdev->netdev_ops = &qlcnic_netdev_failed_ops; + SET_ETHTOOL_OPS(netdev, &qlcnic_ethtool_failed_ops); + err = register_netdev(netdev); + + if (err) { + dev_err(&pdev->dev, "Failed to register net device\n"); + qlcnic_clr_all_drv_state(adapter, 0); + goto err_out_free_hw; + } + + pci_set_drvdata(pdev, adapter); + qlcnic_add_sysfs(adapter); + + return 0; } static void qlcnic_remove(struct pci_dev *pdev) @@ -2518,8 +2538,16 @@ static int qlcnic_resume(struct pci_dev *pdev) static int qlcnic_open(struct net_device *netdev) { struct qlcnic_adapter *adapter = netdev_priv(netdev); + u32 state; int err; + state = QLC_SHARED_REG_RD32(adapter, QLCNIC_CRB_DEV_STATE); + if (state == QLCNIC_DEV_FAILED || state == QLCNIC_DEV_BADBAD) { + netdev_err(netdev, "%s: Device is in FAILED state\n", __func__); + + return -EIO; + } + netif_carrier_off(netdev); err = qlcnic_attach(adapter); @@ -3228,6 +3256,13 @@ void qlcnic_82xx_dev_request_reset(struct qlcnic_adapter *adapter, u32 key) return; state = QLC_SHARED_REG_RD32(adapter, QLCNIC_CRB_DEV_STATE); + if (state == QLCNIC_DEV_FAILED || state == QLCNIC_DEV_BADBAD) { + netdev_err(adapter->netdev, "%s: Device is in FAILED state\n", + __func__); + qlcnic_api_unlock(adapter); + + return; + } if (state == QLCNIC_DEV_READY) { QLC_SHARED_REG_WR32(adapter, QLCNIC_CRB_DEV_STATE, diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c index 330d9a8774a..686f460b150 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c @@ -397,6 +397,7 @@ static int qlcnic_pci_sriov_disable(struct qlcnic_adapter *adapter) { struct net_device *netdev = adapter->netdev; + rtnl_lock(); if (netif_running(netdev)) __qlcnic_down(adapter, netdev); @@ -407,12 +408,15 @@ static int qlcnic_pci_sriov_disable(struct qlcnic_adapter *adapter) /* After disabling SRIOV re-init the driver in default mode configure opmode based on op_mode of function */ - if (qlcnic_83xx_configure_opmode(adapter)) + if (qlcnic_83xx_configure_opmode(adapter)) { + rtnl_unlock(); return -EIO; + } if (netif_running(netdev)) __qlcnic_up(adapter, netdev); + rtnl_unlock(); return 0; } @@ -533,6 +537,7 @@ static int qlcnic_pci_sriov_enable(struct qlcnic_adapter *adapter, int num_vfs) return -EIO; } + rtnl_lock(); if (netif_running(netdev)) __qlcnic_down(adapter, netdev); @@ -555,6 +560,7 @@ static int qlcnic_pci_sriov_enable(struct qlcnic_adapter *adapter, int num_vfs) __qlcnic_up(adapter, netdev); error: + rtnl_unlock(); return err; } diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sysfs.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sysfs.c index c6165d05cc1..019f4377307 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sysfs.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sysfs.c @@ -1272,6 +1272,7 @@ void qlcnic_remove_sysfs_entries(struct qlcnic_adapter *adapter) void qlcnic_create_diag_entries(struct qlcnic_adapter *adapter) { struct device *dev = &adapter->pdev->dev; + u32 state; if (device_create_bin_file(dev, &bin_attr_port_stats)) dev_info(dev, "failed to create port stats sysfs entry"); @@ -1285,8 +1286,13 @@ void qlcnic_create_diag_entries(struct qlcnic_adapter *adapter) if (device_create_bin_file(dev, &bin_attr_mem)) dev_info(dev, "failed to create mem sysfs entry\n"); + state = QLC_SHARED_REG_RD32(adapter, QLCNIC_CRB_DEV_STATE); + if (state == QLCNIC_DEV_FAILED || state == QLCNIC_DEV_BADBAD) + return; + if (device_create_bin_file(dev, &bin_attr_pci_config)) dev_info(dev, "failed to create pci config sysfs entry"); + if (device_create_file(dev, &dev_attr_beacon)) dev_info(dev, "failed to create beacon sysfs entry"); @@ -1307,6 +1313,7 @@ void qlcnic_create_diag_entries(struct qlcnic_adapter *adapter) void qlcnic_remove_diag_entries(struct qlcnic_adapter *adapter) { struct device *dev = &adapter->pdev->dev; + u32 state; device_remove_bin_file(dev, &bin_attr_port_stats); @@ -1315,6 +1322,11 @@ void qlcnic_remove_diag_entries(struct qlcnic_adapter *adapter) device_remove_file(dev, &dev_attr_diag_mode); device_remove_bin_file(dev, &bin_attr_crb); device_remove_bin_file(dev, &bin_attr_mem); + + state = QLC_SHARED_REG_RD32(adapter, QLCNIC_CRB_DEV_STATE); + if (state == QLCNIC_DEV_FAILED || state == QLCNIC_DEV_BADBAD) + return; + device_remove_bin_file(dev, &bin_attr_pci_config); device_remove_file(dev, &dev_attr_beacon); if (!(adapter->flags & QLCNIC_ESWITCH_ENABLED)) diff --git a/drivers/net/ethernet/qlogic/qlge/qlge_dbg.c b/drivers/net/ethernet/qlogic/qlge/qlge_dbg.c index 10093f0c4c0..6bc5db70392 100644 --- a/drivers/net/ethernet/qlogic/qlge/qlge_dbg.c +++ b/drivers/net/ethernet/qlogic/qlge/qlge_dbg.c @@ -740,8 +740,8 @@ int ql_core_dump(struct ql_adapter *qdev, struct ql_mpi_coredump *mpi_coredump) int i; if (!mpi_coredump) { - netif_err(qdev, drv, qdev->ndev, "No memory available\n"); - return -ENOMEM; + netif_err(qdev, drv, qdev->ndev, "No memory allocated\n"); + return -EINVAL; } /* Try to get the spinlock, but dont worry if diff --git a/drivers/net/ethernet/qlogic/qlge/qlge_mpi.c b/drivers/net/ethernet/qlogic/qlge/qlge_mpi.c index ff2bf8a4e24..7ad146080c3 100644 --- a/drivers/net/ethernet/qlogic/qlge/qlge_mpi.c +++ b/drivers/net/ethernet/qlogic/qlge/qlge_mpi.c @@ -1274,7 +1274,7 @@ void ql_mpi_reset_work(struct work_struct *work) return; } - if (!ql_core_dump(qdev, qdev->mpi_coredump)) { + if (qdev->mpi_coredump && !ql_core_dump(qdev, qdev->mpi_coredump)) { netif_err(qdev, drv, qdev->ndev, "Core is dumped!\n"); qdev->core_is_dumped = 1; queue_delayed_work(qdev->workqueue, diff --git a/drivers/net/ethernet/sfc/mcdi.c b/drivers/net/ethernet/sfc/mcdi.c index 128d7cdf9eb..c082562dbf4 100644 --- a/drivers/net/ethernet/sfc/mcdi.c +++ b/drivers/net/ethernet/sfc/mcdi.c @@ -27,10 +27,10 @@ /* A reboot/assertion causes the MCDI status word to be set after the * command word is set or a REBOOT event is sent. If we notice a reboot - * via these mechanisms then wait 20ms for the status word to be set. + * via these mechanisms then wait 250ms for the status word to be set. */ #define MCDI_STATUS_DELAY_US 100 -#define MCDI_STATUS_DELAY_COUNT 200 +#define MCDI_STATUS_DELAY_COUNT 2500 #define MCDI_STATUS_SLEEP_MS \ (MCDI_STATUS_DELAY_US * MCDI_STATUS_DELAY_COUNT / 1000) @@ -800,9 +800,6 @@ static void efx_mcdi_ev_death(struct efx_nic *efx, int rc) } else { int count; - /* Nobody was waiting for an MCDI request, so trigger a reset */ - efx_schedule_reset(efx, RESET_TYPE_MC_FAILURE); - /* Consume the status word since efx_mcdi_rpc_finish() won't */ for (count = 0; count < MCDI_STATUS_DELAY_COUNT; ++count) { if (efx_mcdi_poll_reboot(efx)) @@ -810,6 +807,9 @@ static void efx_mcdi_ev_death(struct efx_nic *efx, int rc) udelay(MCDI_STATUS_DELAY_US); } mcdi->new_epoch = true; + + /* Nobody was waiting for an MCDI request, so trigger a reset */ + efx_schedule_reset(efx, RESET_TYPE_MC_FAILURE); } spin_unlock(&mcdi->iface_lock); diff --git a/drivers/net/ethernet/via/via-rhine.c b/drivers/net/ethernet/via/via-rhine.c index c8f088ab5fd..bdf697b184a 100644 --- a/drivers/net/ethernet/via/via-rhine.c +++ b/drivers/net/ethernet/via/via-rhine.c @@ -32,7 +32,7 @@ #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt #define DRV_NAME "via-rhine" -#define DRV_VERSION "1.5.0" +#define DRV_VERSION "1.5.1" #define DRV_RELDATE "2010-10-09" #include <linux/types.h> @@ -1704,7 +1704,12 @@ static netdev_tx_t rhine_start_tx(struct sk_buff *skb, cpu_to_le32(TXDESC | (skb->len >= ETH_ZLEN ? skb->len : ETH_ZLEN)); if (unlikely(vlan_tx_tag_present(skb))) { - rp->tx_ring[entry].tx_status = cpu_to_le32((vlan_tx_tag_get(skb)) << 16); + u16 vid_pcp = vlan_tx_tag_get(skb); + + /* drop CFI/DEI bit, register needs VID and PCP */ + vid_pcp = (vid_pcp & VLAN_VID_MASK) | + ((vid_pcp & VLAN_PRIO_MASK) >> 1); + rp->tx_ring[entry].tx_status = cpu_to_le32((vid_pcp) << 16); /* request tagging */ rp->tx_ring[entry].desc_length |= cpu_to_le32(0x020000); } diff --git a/drivers/net/ethernet/xilinx/ll_temac_main.c b/drivers/net/ethernet/xilinx/ll_temac_main.c index b88121f240c..0029148077a 100644 --- a/drivers/net/ethernet/xilinx/ll_temac_main.c +++ b/drivers/net/ethernet/xilinx/ll_temac_main.c @@ -297,6 +297,12 @@ static int temac_dma_bd_init(struct net_device *ndev) lp->rx_bd_p + (sizeof(*lp->rx_bd_v) * (RX_BD_NUM - 1))); lp->dma_out(lp, TX_CURDESC_PTR, lp->tx_bd_p); + /* Init descriptor indexes */ + lp->tx_bd_ci = 0; + lp->tx_bd_next = 0; + lp->tx_bd_tail = 0; + lp->rx_bd_ci = 0; + return 0; out: diff --git a/drivers/net/slip/slip.c b/drivers/net/slip/slip.c index a34d6bf5e43..cc70ecfc706 100644 --- a/drivers/net/slip/slip.c +++ b/drivers/net/slip/slip.c @@ -429,11 +429,13 @@ static void slip_write_wakeup(struct tty_struct *tty) if (!sl || sl->magic != SLIP_MAGIC || !netif_running(sl->dev)) return; + spin_lock(&sl->lock); if (sl->xleft <= 0) { /* Now serial buffer is almost free & we can start * transmission of another packet */ sl->dev->stats.tx_packets++; clear_bit(TTY_DO_WRITE_WAKEUP, &tty->flags); + spin_unlock(&sl->lock); sl_unlock(sl); return; } @@ -441,6 +443,7 @@ static void slip_write_wakeup(struct tty_struct *tty) actual = tty->ops->write(tty, sl->xhead, sl->xleft); sl->xleft -= actual; sl->xhead += actual; + spin_unlock(&sl->lock); } static void sl_tx_timeout(struct net_device *dev) diff --git a/drivers/net/usb/dm9601.c b/drivers/net/usb/dm9601.c index 2dbb9460349..c6867f926cf 100644 --- a/drivers/net/usb/dm9601.c +++ b/drivers/net/usb/dm9601.c @@ -303,7 +303,7 @@ static void dm9601_set_multicast(struct net_device *net) rx_ctl |= 0x02; } else if (net->flags & IFF_ALLMULTI || netdev_mc_count(net) > DM_MAX_MCAST) { - rx_ctl |= 0x04; + rx_ctl |= 0x08; } else if (!netdev_mc_empty(net)) { struct netdev_hw_addr *ha; diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c index 6312332afeb..3d6aaf79d8b 100644 --- a/drivers/net/usb/qmi_wwan.c +++ b/drivers/net/usb/qmi_wwan.c @@ -714,7 +714,7 @@ static const struct usb_device_id products[] = { {QMI_FIXED_INTF(0x2357, 0x0201, 4)}, /* TP-LINK HSUPA Modem MA180 */ {QMI_FIXED_INTF(0x2357, 0x9000, 4)}, /* TP-LINK MA260 */ {QMI_FIXED_INTF(0x1bc7, 0x1200, 5)}, /* Telit LE920 */ - {QMI_FIXED_INTF(0x1e2d, 0x12d1, 4)}, /* Cinterion PLxx */ + {QMI_FIXED_INTF(0x1e2d, 0x0060, 4)}, /* Cinterion PLxx */ /* 4. Gobi 1000 devices */ {QMI_GOBI1K_DEVICE(0x05c6, 0x9212)}, /* Acer Gobi Modem Device */ diff --git a/drivers/net/usb/usbnet.c b/drivers/net/usb/usbnet.c index 7b331e613e0..bf94e10a37c 100644 --- a/drivers/net/usb/usbnet.c +++ b/drivers/net/usb/usbnet.c @@ -1241,7 +1241,9 @@ static int build_dma_sg(const struct sk_buff *skb, struct urb *urb) if (num_sgs == 1) return 0; - urb->sg = kmalloc(num_sgs * sizeof(struct scatterlist), GFP_ATOMIC); + /* reserve one for zero packet */ + urb->sg = kmalloc((num_sgs + 1) * sizeof(struct scatterlist), + GFP_ATOMIC); if (!urb->sg) return -ENOMEM; @@ -1305,7 +1307,7 @@ netdev_tx_t usbnet_start_xmit (struct sk_buff *skb, if (build_dma_sg(skb, urb) < 0) goto drop; } - entry->length = length = urb->transfer_buffer_length; + length = urb->transfer_buffer_length; /* don't assume the hardware handles USB_ZERO_PACKET * NOTE: strictly conforming cdc-ether devices should expect @@ -1317,15 +1319,18 @@ netdev_tx_t usbnet_start_xmit (struct sk_buff *skb, if (length % dev->maxpacket == 0) { if (!(info->flags & FLAG_SEND_ZLP)) { if (!(info->flags & FLAG_MULTI_PACKET)) { - urb->transfer_buffer_length++; - if (skb_tailroom(skb)) { + length++; + if (skb_tailroom(skb) && !urb->num_sgs) { skb->data[skb->len] = 0; __skb_put(skb, 1); - } + } else if (urb->num_sgs) + sg_set_buf(&urb->sg[urb->num_sgs++], + dev->padding_pkt, 1); } } else urb->transfer_flags |= URB_ZERO_PACKET; } + entry->length = urb->transfer_buffer_length = length; spin_lock_irqsave(&dev->txq.lock, flags); retval = usb_autopm_get_interface_async(dev->intf); @@ -1509,6 +1514,7 @@ void usbnet_disconnect (struct usb_interface *intf) usb_kill_urb(dev->interrupt); usb_free_urb(dev->interrupt); + kfree(dev->padding_pkt); free_netdev(net); } @@ -1679,9 +1685,16 @@ usbnet_probe (struct usb_interface *udev, const struct usb_device_id *prod) /* initialize max rx_qlen and tx_qlen */ usbnet_update_max_qlen(dev); + if (dev->can_dma_sg && !(info->flags & FLAG_SEND_ZLP) && + !(info->flags & FLAG_MULTI_PACKET)) { + dev->padding_pkt = kzalloc(1, GFP_KERNEL); + if (!dev->padding_pkt) + goto out4; + } + status = register_netdev (net); if (status) - goto out4; + goto out5; netif_info(dev, probe, dev->net, "register '%s' at usb-%s-%s, %s, %pM\n", udev->dev.driver->name, @@ -1699,6 +1712,8 @@ usbnet_probe (struct usb_interface *udev, const struct usb_device_id *prod) return 0; +out5: + kfree(dev->padding_pkt); out4: usb_free_urb(dev->interrupt); out3: diff --git a/drivers/net/vxlan.c b/drivers/net/vxlan.c index d1292fe746b..2ef5b6219f3 100644 --- a/drivers/net/vxlan.c +++ b/drivers/net/vxlan.c @@ -952,8 +952,7 @@ void vxlan_sock_release(struct vxlan_sock *vs) spin_lock(&vn->sock_lock); hlist_del_rcu(&vs->hlist); - smp_wmb(); - vs->sock->sk->sk_user_data = NULL; + rcu_assign_sk_user_data(vs->sock->sk, NULL); vxlan_notify_del_rx_port(sk); spin_unlock(&vn->sock_lock); @@ -1048,8 +1047,7 @@ static int vxlan_udp_encap_recv(struct sock *sk, struct sk_buff *skb) port = inet_sk(sk)->inet_sport; - smp_read_barrier_depends(); - vs = (struct vxlan_sock *)sk->sk_user_data; + vs = rcu_dereference_sk_user_data(sk); if (!vs) goto drop; @@ -2302,8 +2300,7 @@ static struct vxlan_sock *vxlan_socket_create(struct net *net, __be16 port, atomic_set(&vs->refcnt, 1); vs->rcv = rcv; vs->data = data; - smp_wmb(); - vs->sock->sk->sk_user_data = vs; + rcu_assign_sk_user_data(vs->sock->sk, vs); spin_lock(&vn->sock_lock); hlist_add_head_rcu(&vs->hlist, vs_head(net, port)); diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c index 4ee472a5a4e..ab9e3a8410b 100644 --- a/drivers/net/wireless/ath/ath9k/recv.c +++ b/drivers/net/wireless/ath/ath9k/recv.c @@ -1270,13 +1270,6 @@ static void ath9k_antenna_check(struct ath_softc *sc, return; /* - * All MPDUs in an aggregate will use the same LNA - * as the first MPDU. - */ - if (rs->rs_isaggr && !rs->rs_firstaggr) - return; - - /* * Change the default rx antenna if rx diversity * chooses the other antenna 3 times in a row. */ diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c index 35b515fe3ff..5ac713d2ff5 100644 --- a/drivers/net/wireless/ath/ath9k/xmit.c +++ b/drivers/net/wireless/ath/ath9k/xmit.c @@ -399,6 +399,7 @@ static struct ath_buf* ath_clone_txbuf(struct ath_softc *sc, struct ath_buf *bf) tbf->bf_buf_addr = bf->bf_buf_addr; memcpy(tbf->bf_desc, bf->bf_desc, sc->sc_ah->caps.tx_desc_len); tbf->bf_state = bf->bf_state; + tbf->bf_state.stale = false; return tbf; } @@ -1389,11 +1390,15 @@ int ath_tx_aggr_start(struct ath_softc *sc, struct ieee80211_sta *sta, u16 tid, u16 *ssn) { struct ath_atx_tid *txtid; + struct ath_txq *txq; struct ath_node *an; u8 density; an = (struct ath_node *)sta->drv_priv; txtid = ATH_AN_2_TID(an, tid); + txq = txtid->ac->txq; + + ath_txq_lock(sc, txq); /* update ampdu factor/density, they may have changed. This may happen * in HT IBSS when a beacon with HT-info is received after the station @@ -1417,6 +1422,8 @@ int ath_tx_aggr_start(struct ath_softc *sc, struct ieee80211_sta *sta, memset(txtid->tx_buf, 0, sizeof(txtid->tx_buf)); txtid->baw_head = txtid->baw_tail = 0; + ath_txq_unlock_complete(sc, txq); + return 0; } @@ -1555,8 +1562,10 @@ void ath9k_release_buffered_frames(struct ieee80211_hw *hw, __skb_unlink(bf->bf_mpdu, tid_q); list_add_tail(&bf->list, &bf_q); ath_set_rates(tid->an->vif, tid->an->sta, bf); - ath_tx_addto_baw(sc, tid, bf); - bf->bf_state.bf_type &= ~BUF_AGGR; + if (bf_isampdu(bf)) { + ath_tx_addto_baw(sc, tid, bf); + bf->bf_state.bf_type &= ~BUF_AGGR; + } if (bf_tail) bf_tail->bf_next = bf; @@ -1950,7 +1959,9 @@ static void ath_tx_txqaddbuf(struct ath_softc *sc, struct ath_txq *txq, if (bf_is_ampdu_not_probing(bf)) txq->axq_ampdu_depth++; - bf = bf->bf_lastbf->bf_next; + bf_last = bf->bf_lastbf; + bf = bf_last->bf_next; + bf_last->bf_next = NULL; } } } diff --git a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh_sdmmc.c b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh_sdmmc.c index 64f4a2bc8dd..c3462b75bd0 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh_sdmmc.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh_sdmmc.c @@ -464,8 +464,6 @@ static struct sdio_driver brcmf_sdmmc_driver = { static int brcmf_sdio_pd_probe(struct platform_device *pdev) { - int ret; - brcmf_dbg(SDIO, "Enter\n"); brcmfmac_sdio_pdata = pdev->dev.platform_data; @@ -473,11 +471,7 @@ static int brcmf_sdio_pd_probe(struct platform_device *pdev) if (brcmfmac_sdio_pdata->power_on) brcmfmac_sdio_pdata->power_on(); - ret = sdio_register_driver(&brcmf_sdmmc_driver); - if (ret) - brcmf_err("sdio_register_driver failed: %d\n", ret); - - return ret; + return 0; } static int brcmf_sdio_pd_remove(struct platform_device *pdev) @@ -500,6 +494,15 @@ static struct platform_driver brcmf_sdio_pd = { } }; +void brcmf_sdio_register(void) +{ + int ret; + + ret = sdio_register_driver(&brcmf_sdmmc_driver); + if (ret) + brcmf_err("sdio_register_driver failed: %d\n", ret); +} + void brcmf_sdio_exit(void) { brcmf_dbg(SDIO, "Enter\n"); @@ -510,18 +513,13 @@ void brcmf_sdio_exit(void) sdio_unregister_driver(&brcmf_sdmmc_driver); } -void brcmf_sdio_init(void) +void __init brcmf_sdio_init(void) { int ret; brcmf_dbg(SDIO, "Enter\n"); ret = platform_driver_probe(&brcmf_sdio_pd, brcmf_sdio_pd_probe); - if (ret == -ENODEV) { - brcmf_dbg(SDIO, "No platform data available, registering without.\n"); - ret = sdio_register_driver(&brcmf_sdmmc_driver); - } - - if (ret) - brcmf_err("driver registration failed: %d\n", ret); + if (ret == -ENODEV) + brcmf_dbg(SDIO, "No platform data available.\n"); } diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_bus.h b/drivers/net/wireless/brcm80211/brcmfmac/dhd_bus.h index f7c1985844e..74156f84180 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_bus.h +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_bus.h @@ -156,10 +156,11 @@ extern int brcmf_bus_start(struct device *dev); #ifdef CONFIG_BRCMFMAC_SDIO extern void brcmf_sdio_exit(void); extern void brcmf_sdio_init(void); +extern void brcmf_sdio_register(void); #endif #ifdef CONFIG_BRCMFMAC_USB extern void brcmf_usb_exit(void); -extern void brcmf_usb_init(void); +extern void brcmf_usb_register(void); #endif #endif /* _BRCMF_BUS_H_ */ diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c index e067aec1fbf..40e7f854e10 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c @@ -1231,21 +1231,23 @@ u32 brcmf_get_chip_info(struct brcmf_if *ifp) return bus->chip << 4 | bus->chiprev; } -static void brcmf_driver_init(struct work_struct *work) +static void brcmf_driver_register(struct work_struct *work) { - brcmf_debugfs_init(); - #ifdef CONFIG_BRCMFMAC_SDIO - brcmf_sdio_init(); + brcmf_sdio_register(); #endif #ifdef CONFIG_BRCMFMAC_USB - brcmf_usb_init(); + brcmf_usb_register(); #endif } -static DECLARE_WORK(brcmf_driver_work, brcmf_driver_init); +static DECLARE_WORK(brcmf_driver_work, brcmf_driver_register); static int __init brcmfmac_module_init(void) { + brcmf_debugfs_init(); +#ifdef CONFIG_BRCMFMAC_SDIO + brcmf_sdio_init(); +#endif if (!schedule_work(&brcmf_driver_work)) return -EBUSY; diff --git a/drivers/net/wireless/brcm80211/brcmfmac/usb.c b/drivers/net/wireless/brcm80211/brcmfmac/usb.c index 39e01a7c855..f4aea47e073 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/usb.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/usb.c @@ -1539,7 +1539,7 @@ void brcmf_usb_exit(void) brcmf_release_fw(&fw_image_list); } -void brcmf_usb_init(void) +void brcmf_usb_register(void) { brcmf_dbg(USB, "Enter\n"); INIT_LIST_HEAD(&fw_image_list); diff --git a/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c b/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c index 3a6544710c8..edc5d105ff9 100644 --- a/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c +++ b/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c @@ -457,6 +457,8 @@ static int brcms_ops_start(struct ieee80211_hw *hw) if (err != 0) brcms_err(wl->wlc->hw->d11core, "%s: brcms_up() returned %d\n", __func__, err); + + bcma_core_pci_power_save(wl->wlc->hw->d11core->bus, true); return err; } @@ -479,6 +481,8 @@ static void brcms_ops_stop(struct ieee80211_hw *hw) return; } + bcma_core_pci_power_save(wl->wlc->hw->d11core->bus, false); + /* put driver in down state */ spin_lock_bh(&wl->lock); brcms_down(wl); diff --git a/drivers/net/wireless/cw1200/cw1200_spi.c b/drivers/net/wireless/cw1200/cw1200_spi.c index f5e6b489ed3..899cad34ccd 100644 --- a/drivers/net/wireless/cw1200/cw1200_spi.c +++ b/drivers/net/wireless/cw1200/cw1200_spi.c @@ -42,7 +42,6 @@ struct hwbus_priv { spinlock_t lock; /* Serialize all bus operations */ wait_queue_head_t wq; int claimed; - int irq_disabled; }; #define SDIO_TO_SPI_ADDR(addr) ((addr & 0x1f)>>2) @@ -238,8 +237,6 @@ static irqreturn_t cw1200_spi_irq_handler(int irq, void *dev_id) struct hwbus_priv *self = dev_id; if (self->core) { - disable_irq_nosync(self->func->irq); - self->irq_disabled = 1; cw1200_irq_handler(self->core); return IRQ_HANDLED; } else { @@ -253,9 +250,10 @@ static int cw1200_spi_irq_subscribe(struct hwbus_priv *self) pr_debug("SW IRQ subscribe\n"); - ret = request_any_context_irq(self->func->irq, cw1200_spi_irq_handler, - IRQF_TRIGGER_HIGH, - "cw1200_wlan_irq", self); + ret = request_threaded_irq(self->func->irq, NULL, + cw1200_spi_irq_handler, + IRQF_TRIGGER_HIGH | IRQF_ONESHOT, + "cw1200_wlan_irq", self); if (WARN_ON(ret < 0)) goto exit; @@ -273,22 +271,13 @@ exit: static int cw1200_spi_irq_unsubscribe(struct hwbus_priv *self) { + int ret = 0; + pr_debug("SW IRQ unsubscribe\n"); disable_irq_wake(self->func->irq); free_irq(self->func->irq, self); - return 0; -} - -static int cw1200_spi_irq_enable(struct hwbus_priv *self, int enable) -{ - /* Disables are handled by the interrupt handler */ - if (enable && self->irq_disabled) { - enable_irq(self->func->irq); - self->irq_disabled = 0; - } - - return 0; + return ret; } static int cw1200_spi_off(const struct cw1200_platform_data_spi *pdata) @@ -368,7 +357,6 @@ static struct hwbus_ops cw1200_spi_hwbus_ops = { .unlock = cw1200_spi_unlock, .align_size = cw1200_spi_align_size, .power_mgmt = cw1200_spi_pm, - .irq_enable = cw1200_spi_irq_enable, }; /* Probe Function to be called by SPI stack when device is discovered */ diff --git a/drivers/net/wireless/cw1200/fwio.c b/drivers/net/wireless/cw1200/fwio.c index 0b2061bbc68..acdff0f7f95 100644 --- a/drivers/net/wireless/cw1200/fwio.c +++ b/drivers/net/wireless/cw1200/fwio.c @@ -485,7 +485,7 @@ int cw1200_load_firmware(struct cw1200_common *priv) /* Enable interrupt signalling */ priv->hwbus_ops->lock(priv->hwbus_priv); - ret = __cw1200_irq_enable(priv, 2); + ret = __cw1200_irq_enable(priv, 1); priv->hwbus_ops->unlock(priv->hwbus_priv); if (ret < 0) goto unsubscribe; diff --git a/drivers/net/wireless/cw1200/hwbus.h b/drivers/net/wireless/cw1200/hwbus.h index 51dfb3a9073..8b2fc831c3d 100644 --- a/drivers/net/wireless/cw1200/hwbus.h +++ b/drivers/net/wireless/cw1200/hwbus.h @@ -28,7 +28,6 @@ struct hwbus_ops { void (*unlock)(struct hwbus_priv *self); size_t (*align_size)(struct hwbus_priv *self, size_t size); int (*power_mgmt)(struct hwbus_priv *self, bool suspend); - int (*irq_enable)(struct hwbus_priv *self, int enable); }; #endif /* CW1200_HWBUS_H */ diff --git a/drivers/net/wireless/cw1200/hwio.c b/drivers/net/wireless/cw1200/hwio.c index 41bd7615cca..ff230b7aeed 100644 --- a/drivers/net/wireless/cw1200/hwio.c +++ b/drivers/net/wireless/cw1200/hwio.c @@ -273,21 +273,6 @@ int __cw1200_irq_enable(struct cw1200_common *priv, int enable) u16 val16; int ret; - /* We need to do this hack because the SPI layer can sleep on I/O - and the general path involves I/O to the device in interrupt - context. - - However, the initial enable call needs to go to the hardware. - - We don't worry about shutdown because we do a full reset which - clears the interrupt enabled bits. - */ - if (priv->hwbus_ops->irq_enable) { - ret = priv->hwbus_ops->irq_enable(priv->hwbus_priv, enable); - if (ret || enable < 2) - return ret; - } - if (HIF_8601_SILICON == priv->hw_type) { ret = __cw1200_reg_read_32(priv, ST90TDS_CONFIG_REG_ID, &val32); if (ret < 0) { diff --git a/drivers/net/wireless/mwifiex/11n_aggr.c b/drivers/net/wireless/mwifiex/11n_aggr.c index 21c68826470..1214c587fd0 100644 --- a/drivers/net/wireless/mwifiex/11n_aggr.c +++ b/drivers/net/wireless/mwifiex/11n_aggr.c @@ -150,7 +150,7 @@ mwifiex_11n_form_amsdu_txpd(struct mwifiex_private *priv, */ int mwifiex_11n_aggregate_pkt(struct mwifiex_private *priv, - struct mwifiex_ra_list_tbl *pra_list, int headroom, + struct mwifiex_ra_list_tbl *pra_list, int ptrindex, unsigned long ra_list_flags) __releases(&priv->wmm.ra_list_spinlock) { @@ -160,6 +160,7 @@ mwifiex_11n_aggregate_pkt(struct mwifiex_private *priv, int pad = 0, ret; struct mwifiex_tx_param tx_param; struct txpd *ptx_pd = NULL; + int headroom = adapter->iface_type == MWIFIEX_USB ? 0 : INTF_HEADER_LEN; skb_src = skb_peek(&pra_list->skb_head); if (!skb_src) { diff --git a/drivers/net/wireless/mwifiex/11n_aggr.h b/drivers/net/wireless/mwifiex/11n_aggr.h index 900e1c62a0c..892098d6a69 100644 --- a/drivers/net/wireless/mwifiex/11n_aggr.h +++ b/drivers/net/wireless/mwifiex/11n_aggr.h @@ -26,7 +26,7 @@ int mwifiex_11n_deaggregate_pkt(struct mwifiex_private *priv, struct sk_buff *skb); int mwifiex_11n_aggregate_pkt(struct mwifiex_private *priv, - struct mwifiex_ra_list_tbl *ptr, int headroom, + struct mwifiex_ra_list_tbl *ptr, int ptr_index, unsigned long flags) __releases(&priv->wmm.ra_list_spinlock); diff --git a/drivers/net/wireless/mwifiex/cmdevt.c b/drivers/net/wireless/mwifiex/cmdevt.c index 2d761477d15..a6c46f3b6e3 100644 --- a/drivers/net/wireless/mwifiex/cmdevt.c +++ b/drivers/net/wireless/mwifiex/cmdevt.c @@ -1155,7 +1155,7 @@ int mwifiex_ret_802_11_hs_cfg(struct mwifiex_private *priv, uint32_t conditions = le32_to_cpu(phs_cfg->params.hs_config.conditions); if (phs_cfg->action == cpu_to_le16(HS_ACTIVATE) && - adapter->iface_type == MWIFIEX_SDIO) { + adapter->iface_type != MWIFIEX_USB) { mwifiex_hs_activated_event(priv, true); return 0; } else { @@ -1167,8 +1167,7 @@ int mwifiex_ret_802_11_hs_cfg(struct mwifiex_private *priv, } if (conditions != HS_CFG_CANCEL) { adapter->is_hs_configured = true; - if (adapter->iface_type == MWIFIEX_USB || - adapter->iface_type == MWIFIEX_PCIE) + if (adapter->iface_type == MWIFIEX_USB) mwifiex_hs_activated_event(priv, true); } else { adapter->is_hs_configured = false; diff --git a/drivers/net/wireless/mwifiex/usb.c b/drivers/net/wireless/mwifiex/usb.c index 2472d4b7f00..1c70b8d0922 100644 --- a/drivers/net/wireless/mwifiex/usb.c +++ b/drivers/net/wireless/mwifiex/usb.c @@ -447,9 +447,6 @@ static int mwifiex_usb_suspend(struct usb_interface *intf, pm_message_t message) */ adapter->is_suspended = true; - for (i = 0; i < adapter->priv_num; i++) - netif_carrier_off(adapter->priv[i]->netdev); - if (atomic_read(&card->rx_cmd_urb_pending) && card->rx_cmd.urb) usb_kill_urb(card->rx_cmd.urb); @@ -509,10 +506,6 @@ static int mwifiex_usb_resume(struct usb_interface *intf) MWIFIEX_RX_CMD_BUF_SIZE); } - for (i = 0; i < adapter->priv_num; i++) - if (adapter->priv[i]->media_connected) - netif_carrier_on(adapter->priv[i]->netdev); - /* Disable Host Sleep */ if (adapter->hs_activated) mwifiex_cancel_hs(mwifiex_get_priv(adapter, diff --git a/drivers/net/wireless/mwifiex/wmm.c b/drivers/net/wireless/mwifiex/wmm.c index 2e8f9cdea54..95fa3599b40 100644 --- a/drivers/net/wireless/mwifiex/wmm.c +++ b/drivers/net/wireless/mwifiex/wmm.c @@ -1239,8 +1239,7 @@ mwifiex_dequeue_tx_packet(struct mwifiex_adapter *adapter) if (enable_tx_amsdu && mwifiex_is_amsdu_allowed(priv, tid) && mwifiex_is_11n_aggragation_possible(priv, ptr, adapter->tx_buf_size)) - mwifiex_11n_aggregate_pkt(priv, ptr, INTF_HEADER_LEN, - ptr_index, flags); + mwifiex_11n_aggregate_pkt(priv, ptr, ptr_index, flags); /* ra_list_spinlock has been freed in mwifiex_11n_aggregate_pkt() */ else diff --git a/drivers/net/wireless/p54/p54usb.c b/drivers/net/wireless/p54/p54usb.c index b9deef66cf4..e328d3058c4 100644 --- a/drivers/net/wireless/p54/p54usb.c +++ b/drivers/net/wireless/p54/p54usb.c @@ -83,6 +83,7 @@ static struct usb_device_id p54u_table[] = { {USB_DEVICE(0x06a9, 0x000e)}, /* Westell 802.11g USB (A90-211WG-01) */ {USB_DEVICE(0x06b9, 0x0121)}, /* Thomson SpeedTouch 121g */ {USB_DEVICE(0x0707, 0xee13)}, /* SMC 2862W-G version 2 */ + {USB_DEVICE(0x07aa, 0x0020)}, /* Corega WLUSB2GTST USB */ {USB_DEVICE(0x0803, 0x4310)}, /* Zoom 4410a */ {USB_DEVICE(0x083a, 0x4521)}, /* Siemens Gigaset USB Adapter 54 version 2 */ {USB_DEVICE(0x083a, 0x4531)}, /* T-Com Sinus 154 data II */ @@ -979,6 +980,7 @@ static int p54u_load_firmware(struct ieee80211_hw *dev, if (err) { dev_err(&priv->udev->dev, "(p54usb) cannot load firmware %s " "(%d)!\n", p54u_fwlist[i].fw, err); + usb_put_dev(udev); } return err; diff --git a/drivers/net/wireless/rtlwifi/wifi.h b/drivers/net/wireless/rtlwifi/wifi.h index cc03e7c87cb..703258742d2 100644 --- a/drivers/net/wireless/rtlwifi/wifi.h +++ b/drivers/net/wireless/rtlwifi/wifi.h @@ -2057,7 +2057,7 @@ struct rtl_priv { that it points to the data allocated beyond this structure like: rtl_pci_priv or rtl_usb_priv */ - u8 priv[0]; + u8 priv[0] __aligned(sizeof(void *)); }; #define rtl_priv(hw) (((struct rtl_priv *)(hw)->priv)) diff --git a/drivers/net/xen-netback/xenbus.c b/drivers/net/xen-netback/xenbus.c index a53782ef154..b45bce20ad7 100644 --- a/drivers/net/xen-netback/xenbus.c +++ b/drivers/net/xen-netback/xenbus.c @@ -24,6 +24,12 @@ struct backend_info { struct xenbus_device *dev; struct xenvif *vif; + + /* This is the state that will be reflected in xenstore when any + * active hotplug script completes. + */ + enum xenbus_state state; + enum xenbus_state frontend_state; struct xenbus_watch hotplug_status_watch; u8 have_hotplug_status_watch:1; @@ -136,6 +142,8 @@ static int netback_probe(struct xenbus_device *dev, if (err) goto fail; + be->state = XenbusStateInitWait; + /* This kicks hotplug scripts, so do it immediately. */ backend_create_xenvif(be); @@ -208,24 +216,113 @@ static void backend_create_xenvif(struct backend_info *be) kobject_uevent(&dev->dev.kobj, KOBJ_ONLINE); } - -static void disconnect_backend(struct xenbus_device *dev) +static void backend_disconnect(struct backend_info *be) { - struct backend_info *be = dev_get_drvdata(&dev->dev); - if (be->vif) xenvif_disconnect(be->vif); } -static void destroy_backend(struct xenbus_device *dev) +static void backend_connect(struct backend_info *be) { - struct backend_info *be = dev_get_drvdata(&dev->dev); + if (be->vif) + connect(be); +} - if (be->vif) { - kobject_uevent(&dev->dev.kobj, KOBJ_OFFLINE); - xenbus_rm(XBT_NIL, dev->nodename, "hotplug-status"); - xenvif_free(be->vif); - be->vif = NULL; +static inline void backend_switch_state(struct backend_info *be, + enum xenbus_state state) +{ + struct xenbus_device *dev = be->dev; + + pr_debug("%s -> %s\n", dev->nodename, xenbus_strstate(state)); + be->state = state; + + /* If we are waiting for a hotplug script then defer the + * actual xenbus state change. + */ + if (!be->have_hotplug_status_watch) + xenbus_switch_state(dev, state); +} + +/* Handle backend state transitions: + * + * The backend state starts in InitWait and the following transitions are + * allowed. + * + * InitWait -> Connected + * + * ^ \ | + * | \ | + * | \ | + * | \ | + * | \ | + * | \ | + * | V V + * + * Closed <-> Closing + * + * The state argument specifies the eventual state of the backend and the + * function transitions to that state via the shortest path. + */ +static void set_backend_state(struct backend_info *be, + enum xenbus_state state) +{ + while (be->state != state) { + switch (be->state) { + case XenbusStateClosed: + switch (state) { + case XenbusStateInitWait: + case XenbusStateConnected: + pr_info("%s: prepare for reconnect\n", + be->dev->nodename); + backend_switch_state(be, XenbusStateInitWait); + break; + case XenbusStateClosing: + backend_switch_state(be, XenbusStateClosing); + break; + default: + BUG(); + } + break; + case XenbusStateInitWait: + switch (state) { + case XenbusStateConnected: + backend_connect(be); + backend_switch_state(be, XenbusStateConnected); + break; + case XenbusStateClosing: + case XenbusStateClosed: + backend_switch_state(be, XenbusStateClosing); + break; + default: + BUG(); + } + break; + case XenbusStateConnected: + switch (state) { + case XenbusStateInitWait: + case XenbusStateClosing: + case XenbusStateClosed: + backend_disconnect(be); + backend_switch_state(be, XenbusStateClosing); + break; + default: + BUG(); + } + break; + case XenbusStateClosing: + switch (state) { + case XenbusStateInitWait: + case XenbusStateConnected: + case XenbusStateClosed: + backend_switch_state(be, XenbusStateClosed); + break; + default: + BUG(); + } + break; + default: + BUG(); + } } } @@ -237,40 +334,33 @@ static void frontend_changed(struct xenbus_device *dev, { struct backend_info *be = dev_get_drvdata(&dev->dev); - pr_debug("frontend state %s\n", xenbus_strstate(frontend_state)); + pr_debug("%s -> %s\n", dev->otherend, xenbus_strstate(frontend_state)); be->frontend_state = frontend_state; switch (frontend_state) { case XenbusStateInitialising: - if (dev->state == XenbusStateClosed) { - pr_info("%s: prepare for reconnect\n", dev->nodename); - xenbus_switch_state(dev, XenbusStateInitWait); - } + set_backend_state(be, XenbusStateInitWait); break; case XenbusStateInitialised: break; case XenbusStateConnected: - if (dev->state == XenbusStateConnected) - break; - if (be->vif) - connect(be); + set_backend_state(be, XenbusStateConnected); break; case XenbusStateClosing: - disconnect_backend(dev); - xenbus_switch_state(dev, XenbusStateClosing); + set_backend_state(be, XenbusStateClosing); break; case XenbusStateClosed: - xenbus_switch_state(dev, XenbusStateClosed); + set_backend_state(be, XenbusStateClosed); if (xenbus_dev_is_online(dev)) break; - destroy_backend(dev); /* fall through if not online */ case XenbusStateUnknown: + set_backend_state(be, XenbusStateClosed); device_unregister(&dev->dev); break; @@ -363,7 +453,9 @@ static void hotplug_status_changed(struct xenbus_watch *watch, if (IS_ERR(str)) return; if (len == sizeof("connected")-1 && !memcmp(str, "connected", len)) { - xenbus_switch_state(be->dev, XenbusStateConnected); + /* Complete any pending state change */ + xenbus_switch_state(be->dev, be->state); + /* Not interested in this watch anymore. */ unregister_hotplug_status_watch(be); } @@ -393,12 +485,8 @@ static void connect(struct backend_info *be) err = xenbus_watch_pathfmt(dev, &be->hotplug_status_watch, hotplug_status_changed, "%s/%s", dev->nodename, "hotplug-status"); - if (err) { - /* Switch now, since we can't do a watch. */ - xenbus_switch_state(dev, XenbusStateConnected); - } else { + if (!err) be->have_hotplug_status_watch = 1; - } netif_wake_queue(be->vif->dev); } diff --git a/drivers/pinctrl/pinconf.c b/drivers/pinctrl/pinconf.c index a138965c01c..b8fcc38c0d1 100644 --- a/drivers/pinctrl/pinconf.c +++ b/drivers/pinctrl/pinconf.c @@ -490,7 +490,7 @@ exit: * <devicename> <state> <pinname> are values that should match the pinctrl-maps * <newvalue> reflects the new config and is driver dependant */ -static int pinconf_dbg_config_write(struct file *file, +static ssize_t pinconf_dbg_config_write(struct file *file, const char __user *user_buf, size_t count, loff_t *ppos) { struct pinctrl_maps *maps_node; @@ -508,7 +508,7 @@ static int pinconf_dbg_config_write(struct file *file, int i; /* Get userspace string and assure termination */ - buf_size = min(count, (size_t)(sizeof(buf)-1)); + buf_size = min(count, sizeof(buf) - 1); if (copy_from_user(buf, user_buf, buf_size)) return -EFAULT; buf[buf_size] = 0; diff --git a/drivers/pinctrl/pinctrl-exynos.c b/drivers/pinctrl/pinctrl-exynos.c index 2689f8d01a1..155b1b3a0e7 100644 --- a/drivers/pinctrl/pinctrl-exynos.c +++ b/drivers/pinctrl/pinctrl-exynos.c @@ -663,18 +663,18 @@ static void exynos_pinctrl_resume(struct samsung_pinctrl_drv_data *drvdata) /* pin banks of s5pv210 pin-controller */ static struct samsung_pin_bank s5pv210_pin_bank[] = { EXYNOS_PIN_BANK_EINTG(8, 0x000, "gpa0", 0x00), - EXYNOS_PIN_BANK_EINTG(6, 0x020, "gpa1", 0x04), + EXYNOS_PIN_BANK_EINTG(4, 0x020, "gpa1", 0x04), EXYNOS_PIN_BANK_EINTG(8, 0x040, "gpb", 0x08), EXYNOS_PIN_BANK_EINTG(5, 0x060, "gpc0", 0x0c), EXYNOS_PIN_BANK_EINTG(5, 0x080, "gpc1", 0x10), EXYNOS_PIN_BANK_EINTG(4, 0x0a0, "gpd0", 0x14), - EXYNOS_PIN_BANK_EINTG(4, 0x0c0, "gpd1", 0x18), - EXYNOS_PIN_BANK_EINTG(5, 0x0e0, "gpe0", 0x1c), - EXYNOS_PIN_BANK_EINTG(8, 0x100, "gpe1", 0x20), - EXYNOS_PIN_BANK_EINTG(6, 0x120, "gpf0", 0x24), + EXYNOS_PIN_BANK_EINTG(6, 0x0c0, "gpd1", 0x18), + EXYNOS_PIN_BANK_EINTG(8, 0x0e0, "gpe0", 0x1c), + EXYNOS_PIN_BANK_EINTG(5, 0x100, "gpe1", 0x20), + EXYNOS_PIN_BANK_EINTG(8, 0x120, "gpf0", 0x24), EXYNOS_PIN_BANK_EINTG(8, 0x140, "gpf1", 0x28), EXYNOS_PIN_BANK_EINTG(8, 0x160, "gpf2", 0x2c), - EXYNOS_PIN_BANK_EINTG(8, 0x180, "gpf3", 0x30), + EXYNOS_PIN_BANK_EINTG(6, 0x180, "gpf3", 0x30), EXYNOS_PIN_BANK_EINTG(7, 0x1a0, "gpg0", 0x34), EXYNOS_PIN_BANK_EINTG(7, 0x1c0, "gpg1", 0x38), EXYNOS_PIN_BANK_EINTG(7, 0x1e0, "gpg2", 0x3c), diff --git a/drivers/pinctrl/pinctrl-palmas.c b/drivers/pinctrl/pinctrl-palmas.c index 82638fac3cf..30c4d356cb3 100644 --- a/drivers/pinctrl/pinctrl-palmas.c +++ b/drivers/pinctrl/pinctrl-palmas.c @@ -891,9 +891,10 @@ static int palmas_pinconf_set(struct pinctrl_dev *pctldev, param = pinconf_to_config_param(configs[i]); param_val = pinconf_to_config_argument(configs[i]); + if (param == PIN_CONFIG_BIAS_PULL_PIN_DEFAULT) + continue; + switch (param) { - case PIN_CONFIG_BIAS_PULL_PIN_DEFAULT: - return 0; case PIN_CONFIG_BIAS_DISABLE: case PIN_CONFIG_BIAS_PULL_UP: case PIN_CONFIG_BIAS_PULL_DOWN: diff --git a/drivers/pinctrl/pinctrl-tegra114.c b/drivers/pinctrl/pinctrl-tegra114.c index 622c4854977..93c9e3899d5 100644 --- a/drivers/pinctrl/pinctrl-tegra114.c +++ b/drivers/pinctrl/pinctrl-tegra114.c @@ -3,7 +3,7 @@ * * Copyright (c) 2012-2013, NVIDIA CORPORATION. All rights reserved. * - * Arthur: Pritesh Raithatha <praithatha@nvidia.com> + * Author: Pritesh Raithatha <praithatha@nvidia.com> * * This program is free software; you can redistribute it and/or modify it * under the terms and conditions of the GNU General Public License, @@ -2763,7 +2763,6 @@ static struct platform_driver tegra114_pinctrl_driver = { }; module_platform_driver(tegra114_pinctrl_driver); -MODULE_ALIAS("platform:tegra114-pinctrl"); MODULE_AUTHOR("Pritesh Raithatha <praithatha@nvidia.com>"); -MODULE_DESCRIPTION("NVIDIA Tegra114 pincontrol driver"); +MODULE_DESCRIPTION("NVIDIA Tegra114 pinctrl driver"); MODULE_LICENSE("GPL v2"); diff --git a/drivers/regulator/da9063-regulator.c b/drivers/regulator/da9063-regulator.c index 1a781639077..b9f2653e4ef 100644 --- a/drivers/regulator/da9063-regulator.c +++ b/drivers/regulator/da9063-regulator.c @@ -709,7 +709,7 @@ static struct da9063_regulators_pdata *da9063_parse_regulators_dt( struct of_regulator_match **da9063_reg_matches) { da9063_reg_matches = NULL; - return PTR_ERR(-ENODEV); + return ERR_PTR(-ENODEV); } #endif diff --git a/drivers/regulator/palmas-regulator.c b/drivers/regulator/palmas-regulator.c index 488dfe7ce9a..7e2b165972e 100644 --- a/drivers/regulator/palmas-regulator.c +++ b/drivers/regulator/palmas-regulator.c @@ -201,13 +201,7 @@ static unsigned int palmas_smps_ramp_delay[4] = {0, 10000, 5000, 2500}; #define SMPS_CTRL_MODE_ECO 0x02 #define SMPS_CTRL_MODE_PWM 0x03 -/* These values are derived from the data sheet. And are the number of steps - * where there is a voltage change, the ranges at beginning and end of register - * max/min values where there are no change are ommitted. - * - * So they are basically (maxV-minV)/stepV - */ -#define PALMAS_SMPS_NUM_VOLTAGES 117 +#define PALMAS_SMPS_NUM_VOLTAGES 122 #define PALMAS_SMPS10_NUM_VOLTAGES 2 #define PALMAS_LDO_NUM_VOLTAGES 50 @@ -979,6 +973,7 @@ static int palmas_regulators_probe(struct platform_device *pdev) pmic->desc[id].min_uV = 900000; pmic->desc[id].uV_step = 50000; pmic->desc[id].linear_min_sel = 1; + pmic->desc[id].enable_time = 500; pmic->desc[id].vsel_reg = PALMAS_BASE_TO_REG(PALMAS_LDO_BASE, palmas_regs_info[id].vsel_addr); @@ -997,6 +992,11 @@ static int palmas_regulators_probe(struct platform_device *pdev) pmic->desc[id].min_uV = 450000; pmic->desc[id].uV_step = 25000; } + + /* LOD6 in vibrator mode will have enable time 2000us */ + if (pdata && pdata->ldo6_vibrator && + (id == PALMAS_REG_LDO6)) + pmic->desc[id].enable_time = 2000; } else { pmic->desc[id].n_voltages = 1; pmic->desc[id].ops = &palmas_ops_extreg; diff --git a/drivers/regulator/ti-abb-regulator.c b/drivers/regulator/ti-abb-regulator.c index d8e3e1262bc..20c271d49dc 100644 --- a/drivers/regulator/ti-abb-regulator.c +++ b/drivers/regulator/ti-abb-regulator.c @@ -279,8 +279,12 @@ static int ti_abb_set_opp(struct regulator_dev *rdev, struct ti_abb *abb, ti_abb_rmw(regs->opp_sel_mask, info->opp_sel, regs->control_reg, abb->base); - /* program LDO VBB vset override if needed */ - if (abb->ldo_base) + /* + * program LDO VBB vset override if needed for !bypass mode + * XXX: Do not switch sequence - for !bypass, LDO override reset *must* + * be performed *before* switch to bias mode else VBB glitches. + */ + if (abb->ldo_base && info->opp_sel != TI_ABB_NOMINAL_OPP) ti_abb_program_ldovbb(dev, abb, info); /* Initiate ABB ldo change */ @@ -295,6 +299,14 @@ static int ti_abb_set_opp(struct regulator_dev *rdev, struct ti_abb *abb, if (ret) goto out; + /* + * Reset LDO VBB vset override bypass mode + * XXX: Do not switch sequence - for bypass, LDO override reset *must* + * be performed *after* switch to bypass else VBB glitches. + */ + if (abb->ldo_base && info->opp_sel == TI_ABB_NOMINAL_OPP) + ti_abb_program_ldovbb(dev, abb, info); + out: return ret; } diff --git a/drivers/regulator/wm831x-ldo.c b/drivers/regulator/wm831x-ldo.c index 1432b26ef2e..2205fbc2c37 100644 --- a/drivers/regulator/wm831x-ldo.c +++ b/drivers/regulator/wm831x-ldo.c @@ -63,7 +63,7 @@ static irqreturn_t wm831x_ldo_uv_irq(int irq, void *data) */ static const struct regulator_linear_range wm831x_gp_ldo_ranges[] = { - { .min_uV = 900000, .max_uV = 1650000, .min_sel = 0, .max_sel = 14, + { .min_uV = 900000, .max_uV = 1600000, .min_sel = 0, .max_sel = 14, .uV_step = 50000 }, { .min_uV = 1700000, .max_uV = 3300000, .min_sel = 15, .max_sel = 31, .uV_step = 100000 }, @@ -332,7 +332,7 @@ static struct platform_driver wm831x_gp_ldo_driver = { */ static const struct regulator_linear_range wm831x_aldo_ranges[] = { - { .min_uV = 1000000, .max_uV = 1650000, .min_sel = 0, .max_sel = 12, + { .min_uV = 1000000, .max_uV = 1600000, .min_sel = 0, .max_sel = 12, .uV_step = 50000 }, { .min_uV = 1700000, .max_uV = 3500000, .min_sel = 13, .max_sel = 31, .uV_step = 100000 }, diff --git a/drivers/regulator/wm8350-regulator.c b/drivers/regulator/wm8350-regulator.c index 835b5f0f344..61ca9292a42 100644 --- a/drivers/regulator/wm8350-regulator.c +++ b/drivers/regulator/wm8350-regulator.c @@ -543,7 +543,7 @@ static int wm8350_dcdc_set_suspend_mode(struct regulator_dev *rdev, } static const struct regulator_linear_range wm8350_ldo_ranges[] = { - { .min_uV = 900000, .max_uV = 1750000, .min_sel = 0, .max_sel = 15, + { .min_uV = 900000, .max_uV = 1650000, .min_sel = 0, .max_sel = 15, .uV_step = 50000 }, { .min_uV = 1800000, .max_uV = 3300000, .min_sel = 16, .max_sel = 31, .uV_step = 100000 }, |