summaryrefslogtreecommitdiffstats
path: root/drivers
diff options
context:
space:
mode:
Diffstat (limited to 'drivers')
-rw-r--r--drivers/edac/Kconfig13
-rw-r--r--drivers/edac/Makefile2
-rw-r--r--drivers/edac/edac_core.h23
-rw-r--r--drivers/edac/edac_mc_sysfs.c175
-rw-r--r--drivers/edac/edac_mce.c61
-rw-r--r--drivers/edac/i7core_edac.c2078
6 files changed, 2325 insertions, 27 deletions
diff --git a/drivers/edac/Kconfig b/drivers/edac/Kconfig
index 55c9c59b3f7..aedef7941b2 100644
--- a/drivers/edac/Kconfig
+++ b/drivers/edac/Kconfig
@@ -69,6 +69,9 @@ config EDAC_MM_EDAC
occurred so that a particular failing memory module can be
replaced. If unsure, select 'Y'.
+config EDAC_MCE
+ bool
+
config EDAC_AMD64
tristate "AMD64 (Opteron, Athlon64) K8, F10h, F11h"
depends on EDAC_MM_EDAC && K8_NB && X86_64 && PCI && EDAC_DECODE_MCE
@@ -166,6 +169,16 @@ config EDAC_I5400
Support for error detection and correction the Intel
i5400 MCH chipset (Seaburg).
+config EDAC_I7CORE
+ tristate "Intel i7 Core (Nehalem) processors"
+ depends on EDAC_MM_EDAC && PCI && X86
+ select EDAC_MCE
+ help
+ Support for error detection and correction the Intel
+ i7 Core (Nehalem) Integrated Memory Controller that exists on
+ newer processors like i7 Core, i7 Core Extreme, Xeon 35xx
+ and Xeon 55xx processors.
+
config EDAC_I82860
tristate "Intel 82860"
depends on EDAC_MM_EDAC && PCI && X86_32
diff --git a/drivers/edac/Makefile b/drivers/edac/Makefile
index bc5dc232a0f..ca6b1bb24cc 100644
--- a/drivers/edac/Makefile
+++ b/drivers/edac/Makefile
@@ -8,6 +8,7 @@
obj-$(CONFIG_EDAC) := edac_stub.o
obj-$(CONFIG_EDAC_MM_EDAC) += edac_core.o
+obj-$(CONFIG_EDAC_MCE) += edac_mce.o
edac_core-objs := edac_mc.o edac_device.o edac_mc_sysfs.o edac_pci_sysfs.o
edac_core-objs += edac_module.o edac_device_sysfs.o
@@ -23,6 +24,7 @@ obj-$(CONFIG_EDAC_CPC925) += cpc925_edac.o
obj-$(CONFIG_EDAC_I5000) += i5000_edac.o
obj-$(CONFIG_EDAC_I5100) += i5100_edac.o
obj-$(CONFIG_EDAC_I5400) += i5400_edac.o
+obj-$(CONFIG_EDAC_I7CORE) += i7core_edac.o
obj-$(CONFIG_EDAC_E7XXX) += e7xxx_edac.o
obj-$(CONFIG_EDAC_E752X) += e752x_edac.o
obj-$(CONFIG_EDAC_I82443BXGX) += i82443bxgx_edac.o
diff --git a/drivers/edac/edac_core.h b/drivers/edac/edac_core.h
index 001b2e797fb..efca9343d26 100644
--- a/drivers/edac/edac_core.h
+++ b/drivers/edac/edac_core.h
@@ -341,12 +341,30 @@ struct csrow_info {
struct channel_info *channels;
};
+struct mcidev_sysfs_group {
+ const char *name; /* group name */
+ struct mcidev_sysfs_attribute *mcidev_attr; /* group attributes */
+};
+
+struct mcidev_sysfs_group_kobj {
+ struct list_head list; /* list for all instances within a mc */
+
+ struct kobject kobj; /* kobj for the group */
+
+ struct mcidev_sysfs_group *grp; /* group description table */
+ struct mem_ctl_info *mci; /* the parent */
+};
+
/* mcidev_sysfs_attribute structure
* used for driver sysfs attributes and in mem_ctl_info
* sysfs top level entries
*/
struct mcidev_sysfs_attribute {
- struct attribute attr;
+ /* It should use either attr or grp */
+ struct attribute attr;
+ struct mcidev_sysfs_group *grp; /* Points to a group of attributes */
+
+ /* Ops for show/store values at the attribute - not used on group */
ssize_t (*show)(struct mem_ctl_info *,char *);
ssize_t (*store)(struct mem_ctl_info *, const char *,size_t);
};
@@ -424,6 +442,9 @@ struct mem_ctl_info {
/* edac sysfs device control */
struct kobject edac_mci_kobj;
+ /* list for all grp instances within a mc */
+ struct list_head grp_kobj_list;
+
/* Additional top controller level attributes, but specified
* by the low level driver.
*
diff --git a/drivers/edac/edac_mc_sysfs.c b/drivers/edac/edac_mc_sysfs.c
index 418b65f1a1d..c200c2fd43e 100644
--- a/drivers/edac/edac_mc_sysfs.c
+++ b/drivers/edac/edac_mc_sysfs.c
@@ -557,6 +557,8 @@ static ssize_t mcidev_show(struct kobject *kobj, struct attribute *attr,
struct mem_ctl_info *mem_ctl_info = to_mci(kobj);
struct mcidev_sysfs_attribute *mcidev_attr = to_mcidev_attr(attr);
+ debugf1("%s() mem_ctl_info %p\n", __func__, mem_ctl_info);
+
if (mcidev_attr->show)
return mcidev_attr->show(mem_ctl_info, buffer);
@@ -569,6 +571,8 @@ static ssize_t mcidev_store(struct kobject *kobj, struct attribute *attr,
struct mem_ctl_info *mem_ctl_info = to_mci(kobj);
struct mcidev_sysfs_attribute *mcidev_attr = to_mcidev_attr(attr);
+ debugf1("%s() mem_ctl_info %p\n", __func__, mem_ctl_info);
+
if (mcidev_attr->store)
return mcidev_attr->store(mem_ctl_info, buffer, count);
@@ -726,28 +730,118 @@ void edac_mc_unregister_sysfs_main_kobj(struct mem_ctl_info *mci)
#define EDAC_DEVICE_SYMLINK "device"
+#define grp_to_mci(k) (container_of(k, struct mcidev_sysfs_group_kobj, kobj)->mci)
+
+/* MCI show/store functions for top most object */
+static ssize_t inst_grp_show(struct kobject *kobj, struct attribute *attr,
+ char *buffer)
+{
+ struct mem_ctl_info *mem_ctl_info = grp_to_mci(kobj);
+ struct mcidev_sysfs_attribute *mcidev_attr = to_mcidev_attr(attr);
+
+ debugf1("%s() mem_ctl_info %p\n", __func__, mem_ctl_info);
+
+ if (mcidev_attr->show)
+ return mcidev_attr->show(mem_ctl_info, buffer);
+
+ return -EIO;
+}
+
+static ssize_t inst_grp_store(struct kobject *kobj, struct attribute *attr,
+ const char *buffer, size_t count)
+{
+ struct mem_ctl_info *mem_ctl_info = grp_to_mci(kobj);
+ struct mcidev_sysfs_attribute *mcidev_attr = to_mcidev_attr(attr);
+
+ debugf1("%s() mem_ctl_info %p\n", __func__, mem_ctl_info);
+
+ if (mcidev_attr->store)
+ return mcidev_attr->store(mem_ctl_info, buffer, count);
+
+ return -EIO;
+}
+
+/* No memory to release for this kobj */
+static void edac_inst_grp_release(struct kobject *kobj)
+{
+ struct mcidev_sysfs_group_kobj *grp;
+ struct mem_ctl_info *mci;
+
+ debugf1("%s()\n", __func__);
+
+ grp = container_of(kobj, struct mcidev_sysfs_group_kobj, kobj);
+ mci = grp->mci;
+
+ kobject_put(&mci->edac_mci_kobj);
+}
+
+/* Intermediate show/store table */
+static struct sysfs_ops inst_grp_ops = {
+ .show = inst_grp_show,
+ .store = inst_grp_store
+};
+
+/* the kobj_type instance for a instance group */
+static struct kobj_type ktype_inst_grp = {
+ .release = edac_inst_grp_release,
+ .sysfs_ops = &inst_grp_ops,
+};
+
+
/*
* edac_create_mci_instance_attributes
- * create MC driver specific attributes at the topmost level
- * directory of this mci instance.
+ * create MC driver specific attributes bellow an specified kobj
+ * This routine calls itself recursively, in order to create an entire
+ * object tree.
*/
-static int edac_create_mci_instance_attributes(struct mem_ctl_info *mci)
+static int edac_create_mci_instance_attributes(struct mem_ctl_info *mci,
+ struct mcidev_sysfs_attribute *sysfs_attrib,
+ struct kobject *kobj)
{
int err;
- struct mcidev_sysfs_attribute *sysfs_attrib;
- /* point to the start of the array and iterate over it
- * adding each attribute listed to this mci instance's kobject
- */
- sysfs_attrib = mci->mc_driver_sysfs_attributes;
+ debugf1("%s()\n", __func__);
+
+ while (sysfs_attrib) {
+ if (sysfs_attrib->grp) {
+ struct mcidev_sysfs_group_kobj *grp_kobj;
+
+ grp_kobj = kzalloc(sizeof(*grp_kobj), GFP_KERNEL);
+ if (!grp_kobj)
+ return -ENOMEM;
+
+ list_add_tail(&grp_kobj->list, &mci->grp_kobj_list);
+
+ grp_kobj->grp = sysfs_attrib->grp;
+ grp_kobj->mci = mci;
+
+ debugf0("%s() grp %s, mci %p\n", __func__,
+ sysfs_attrib->grp->name, mci);
+
+ err = kobject_init_and_add(&grp_kobj->kobj,
+ &ktype_inst_grp,
+ &mci->edac_mci_kobj,
+ sysfs_attrib->grp->name);
+ if (err)
+ return err;
+
+ err = edac_create_mci_instance_attributes(mci,
+ grp_kobj->grp->mcidev_attr,
+ &grp_kobj->kobj);
+
+ if (err)
+ return err;
+ } else if (sysfs_attrib->attr.name) {
+ debugf0("%s() file %s\n", __func__,
+ sysfs_attrib->attr.name);
+
+ err = sysfs_create_file(kobj, &sysfs_attrib->attr);
+ } else
+ break;
- while (sysfs_attrib && sysfs_attrib->attr.name) {
- err = sysfs_create_file(&mci->edac_mci_kobj,
- (struct attribute*) sysfs_attrib);
if (err) {
return err;
}
-
sysfs_attrib++;
}
@@ -759,21 +853,44 @@ static int edac_create_mci_instance_attributes(struct mem_ctl_info *mci)
* remove MC driver specific attributes at the topmost level
* directory of this mci instance.
*/
-static void edac_remove_mci_instance_attributes(struct mem_ctl_info *mci)
+static void edac_remove_mci_instance_attributes(struct mem_ctl_info *mci,
+ struct mcidev_sysfs_attribute *sysfs_attrib,
+ struct kobject *kobj, int count)
{
- struct mcidev_sysfs_attribute *sysfs_attrib;
+ struct mcidev_sysfs_group_kobj *grp_kobj, *tmp;
- /* point to the start of the array and iterate over it
- * adding each attribute listed to this mci instance's kobject
- */
- sysfs_attrib = mci->mc_driver_sysfs_attributes;
+ debugf1("%s()\n", __func__);
- /* loop if there are attributes and until we hit a NULL entry */
- while (sysfs_attrib && sysfs_attrib->attr.name) {
- sysfs_remove_file(&mci->edac_mci_kobj,
- (struct attribute *) sysfs_attrib);
+ /*
+ * loop if there are attributes and until we hit a NULL entry
+ * Remove first all the atributes
+ */
+ while (sysfs_attrib) {
+ if (sysfs_attrib->grp) {
+ list_for_each_entry(grp_kobj, &mci->grp_kobj_list,
+ list)
+ if (grp_kobj->grp == sysfs_attrib->grp)
+ edac_remove_mci_instance_attributes(mci,
+ grp_kobj->grp->mcidev_attr,
+ &grp_kobj->kobj, count + 1);
+ } else if (sysfs_attrib->attr.name) {
+ debugf0("%s() file %s\n", __func__,
+ sysfs_attrib->attr.name);
+ sysfs_remove_file(kobj, &sysfs_attrib->attr);
+ } else
+ break;
sysfs_attrib++;
}
+
+ /*
+ * Now that all attributes got removed, it is save to remove all groups
+ */
+ if (!count)
+ list_for_each_entry_safe(grp_kobj, tmp, &mci->grp_kobj_list,
+ list) {
+ debugf0("%s() grp %s\n", __func__, grp_kobj->grp->name);
+ kobject_put(&grp_kobj->kobj);
+ }
}
@@ -794,6 +911,8 @@ int edac_create_sysfs_mci_device(struct mem_ctl_info *mci)
debugf0("%s() idx=%d\n", __func__, mci->mc_idx);
+ INIT_LIST_HEAD(&mci->grp_kobj_list);
+
/* create a symlink for the device */
err = sysfs_create_link(kobj_mci, &mci->dev->kobj,
EDAC_DEVICE_SYMLINK);
@@ -806,7 +925,9 @@ int edac_create_sysfs_mci_device(struct mem_ctl_info *mci)
* then create them now for the driver.
*/
if (mci->mc_driver_sysfs_attributes) {
- err = edac_create_mci_instance_attributes(mci);
+ err = edac_create_mci_instance_attributes(mci,
+ mci->mc_driver_sysfs_attributes,
+ &mci->edac_mci_kobj);
if (err) {
debugf1("%s() failure to create mci attributes\n",
__func__);
@@ -841,7 +962,8 @@ fail1:
}
/* remove the mci instance's attributes, if any */
- edac_remove_mci_instance_attributes(mci);
+ edac_remove_mci_instance_attributes(mci,
+ mci->mc_driver_sysfs_attributes, &mci->edac_mci_kobj, 0);
/* remove the symlink */
sysfs_remove_link(kobj_mci, EDAC_DEVICE_SYMLINK);
@@ -875,8 +997,9 @@ void edac_remove_sysfs_mci_device(struct mem_ctl_info *mci)
debugf0("%s() remove_mci_instance\n", __func__);
/* remove this mci instance's attribtes */
- edac_remove_mci_instance_attributes(mci);
-
+ edac_remove_mci_instance_attributes(mci,
+ mci->mc_driver_sysfs_attributes,
+ &mci->edac_mci_kobj, 0);
debugf0("%s() unregister this mci kobj\n", __func__);
/* unregister this instance's kobject */
diff --git a/drivers/edac/edac_mce.c b/drivers/edac/edac_mce.c
new file mode 100644
index 00000000000..9ccdc5b140e
--- /dev/null
+++ b/drivers/edac/edac_mce.c
@@ -0,0 +1,61 @@
+/* Provides edac interface to mcelog events
+ *
+ * This file may be distributed under the terms of the
+ * GNU General Public License version 2.
+ *
+ * Copyright (c) 2009 by:
+ * Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * Red Hat Inc. http://www.redhat.com
+ */
+
+#include <linux/module.h>
+#include <linux/edac_mce.h>
+#include <asm/mce.h>
+
+int edac_mce_enabled;
+EXPORT_SYMBOL_GPL(edac_mce_enabled);
+
+
+/*
+ * Extension interface
+ */
+
+static LIST_HEAD(edac_mce_list);
+static DEFINE_MUTEX(edac_mce_lock);
+
+int edac_mce_register(struct edac_mce *edac_mce)
+{
+ mutex_lock(&edac_mce_lock);
+ list_add_tail(&edac_mce->list, &edac_mce_list);
+ mutex_unlock(&edac_mce_lock);
+ return 0;
+}
+EXPORT_SYMBOL(edac_mce_register);
+
+void edac_mce_unregister(struct edac_mce *edac_mce)
+{
+ mutex_lock(&edac_mce_lock);
+ list_del(&edac_mce->list);
+ mutex_unlock(&edac_mce_lock);
+}
+EXPORT_SYMBOL(edac_mce_unregister);
+
+int edac_mce_parse(struct mce *mce)
+{
+ struct edac_mce *edac_mce;
+
+ list_for_each_entry(edac_mce, &edac_mce_list, list) {
+ if (edac_mce->check_error(edac_mce->priv, mce))
+ return 1;
+ }
+
+ /* Nobody queued the error */
+ return 0;
+}
+EXPORT_SYMBOL_GPL(edac_mce_parse);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
+MODULE_AUTHOR("Red Hat Inc. (http://www.redhat.com)");
+MODULE_DESCRIPTION("EDAC Driver for mcelog captured errors");
diff --git a/drivers/edac/i7core_edac.c b/drivers/edac/i7core_edac.c
new file mode 100644
index 00000000000..6b8b7b41ec5
--- /dev/null
+++ b/drivers/edac/i7core_edac.c
@@ -0,0 +1,2078 @@
+/* Intel i7 core/Nehalem Memory Controller kernel module
+ *
+ * This driver supports yhe memory controllers found on the Intel
+ * processor families i7core, i7core 7xx/8xx, i5core, Xeon 35xx,
+ * Xeon 55xx and Xeon 56xx also known as Nehalem, Nehalem-EP, Lynnfield
+ * and Westmere-EP.
+ *
+ * This file may be distributed under the terms of the
+ * GNU General Public License version 2 only.
+ *
+ * Copyright (c) 2009-2010 by:
+ * Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * Red Hat Inc. http://www.redhat.com
+ *
+ * Forked and adapted from the i5400_edac driver
+ *
+ * Based on the following public Intel datasheets:
+ * Intel Core i7 Processor Extreme Edition and Intel Core i7 Processor
+ * Datasheet, Volume 2:
+ * http://download.intel.com/design/processor/datashts/320835.pdf
+ * Intel Xeon Processor 5500 Series Datasheet Volume 2
+ * http://www.intel.com/Assets/PDF/datasheet/321322.pdf
+ * also available at:
+ * http://www.arrownac.com/manufacturers/intel/s/nehalem/5500-datasheet-v2.pdf
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/pci_ids.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/edac.h>
+#include <linux/mmzone.h>
+#include <linux/edac_mce.h>
+#include <linux/smp.h>
+#include <asm/processor.h>
+
+#include "edac_core.h"
+
+/*
+ * This is used for Nehalem-EP and Nehalem-EX devices, where the non-core
+ * registers start at bus 255, and are not reported by BIOS.
+ * We currently find devices with only 2 sockets. In order to support more QPI
+ * Quick Path Interconnect, just increment this number.
+ */
+#define MAX_SOCKET_BUSES 2
+
+
+/*
+ * Alter this version for the module when modifications are made
+ */
+#define I7CORE_REVISION " Ver: 1.0.0 " __DATE__
+#define EDAC_MOD_STR "i7core_edac"
+
+/*
+ * Debug macros
+ */
+#define i7core_printk(level, fmt, arg...) \
+ edac_printk(level, "i7core", fmt, ##arg)
+
+#define i7core_mc_printk(mci, level, fmt, arg...) \
+ edac_mc_chipset_printk(mci, level, "i7core", fmt, ##arg)
+
+/*
+ * i7core Memory Controller Registers
+ */
+
+ /* OFFSETS for Device 0 Function 0 */
+
+#define MC_CFG_CONTROL 0x90
+
+ /* OFFSETS for Device 3 Function 0 */
+
+#define MC_CONTROL 0x48
+#define MC_STATUS 0x4c
+#define MC_MAX_DOD 0x64
+
+/*
+ * OFFSETS for Device 3 Function 4, as inicated on Xeon 5500 datasheet:
+ * http://www.arrownac.com/manufacturers/intel/s/nehalem/5500-datasheet-v2.pdf
+ */
+
+#define MC_TEST_ERR_RCV1 0x60
+ #define DIMM2_COR_ERR(r) ((r) & 0x7fff)
+
+#define MC_TEST_ERR_RCV0 0x64
+ #define DIMM1_COR_ERR(r) (((r) >> 16) & 0x7fff)
+ #define DIMM0_COR_ERR(r) ((r) & 0x7fff)
+
+/* OFFSETS for Device 3 Function 2, as inicated on Xeon 5500 datasheet */
+#define MC_COR_ECC_CNT_0 0x80
+#define MC_COR_ECC_CNT_1 0x84
+#define MC_COR_ECC_CNT_2 0x88
+#define MC_COR_ECC_CNT_3 0x8c
+#define MC_COR_ECC_CNT_4 0x90
+#define MC_COR_ECC_CNT_5 0x94
+
+#define DIMM_TOP_COR_ERR(r) (((r) >> 16) & 0x7fff)
+#define DIMM_BOT_COR_ERR(r) ((r) & 0x7fff)
+
+
+ /* OFFSETS for Devices 4,5 and 6 Function 0 */
+
+#define MC_CHANNEL_DIMM_INIT_PARAMS 0x58
+ #define THREE_DIMMS_PRESENT (1 << 24)
+ #define SINGLE_QUAD_RANK_PRESENT (1 << 23)
+ #define QUAD_RANK_PRESENT (1 << 22)
+ #define REGISTERED_DIMM (1 << 15)
+
+#define MC_CHANNEL_MAPPER 0x60
+ #define RDLCH(r, ch) ((((r) >> (3 + (ch * 6))) & 0x07) - 1)
+ #define WRLCH(r, ch) ((((r) >> (ch * 6)) & 0x07) - 1)
+
+#define MC_CHANNEL_RANK_PRESENT 0x7c
+ #define RANK_PRESENT_MASK 0xffff
+
+#define MC_CHANNEL_ADDR_MATCH 0xf0
+#define MC_CHANNEL_ERROR_MASK 0xf8
+#define MC_CHANNEL_ERROR_INJECT 0xfc
+ #define INJECT_ADDR_PARITY 0x10
+ #define INJECT_ECC 0x08
+ #define MASK_CACHELINE 0x06
+ #define MASK_FULL_CACHELINE 0x06
+ #define MASK_MSB32_CACHELINE 0x04
+ #define MASK_LSB32_CACHELINE 0x02
+ #define NO_MASK_CACHELINE 0x00
+ #define REPEAT_EN 0x01
+
+ /* OFFSETS for Devices 4,5 and 6 Function 1 */
+
+#define MC_DOD_CH_DIMM0 0x48
+#define MC_DOD_CH_DIMM1 0x4c
+#define MC_DOD_CH_DIMM2 0x50
+ #define RANKOFFSET_MASK ((1 << 12) | (1 << 11) | (1 << 10))
+ #define RANKOFFSET(x) ((x & RANKOFFSET_MASK) >> 10)
+ #define DIMM_PRESENT_MASK (1 << 9)
+ #define DIMM_PRESENT(x) (((x) & DIMM_PRESENT_MASK) >> 9)
+ #define MC_DOD_NUMBANK_MASK ((1 << 8) | (1 << 7))
+ #define MC_DOD_NUMBANK(x) (((x) & MC_DOD_NUMBANK_MASK) >> 7)
+ #define MC_DOD_NUMRANK_MASK ((1 << 6) | (1 << 5))
+ #define MC_DOD_NUMRANK(x) (((x) & MC_DOD_NUMRANK_MASK) >> 5)
+ #define MC_DOD_NUMROW_MASK ((1 << 4) | (1 << 3) | (1 << 2))
+ #define MC_DOD_NUMROW(x) (((x) & MC_DOD_NUMROW_MASK) >> 2)
+ #define MC_DOD_NUMCOL_MASK 3
+ #define MC_DOD_NUMCOL(x) ((x) & MC_DOD_NUMCOL_MASK)
+
+#define MC_RANK_PRESENT 0x7c
+
+#define MC_SAG_CH_0 0x80
+#define MC_SAG_CH_1 0x84
+#define MC_SAG_CH_2 0x88
+#define MC_SAG_CH_3 0x8c
+#define MC_SAG_CH_4 0x90
+#define MC_SAG_CH_5 0x94
+#define MC_SAG_CH_6 0x98
+#define MC_SAG_CH_7 0x9c
+
+#define MC_RIR_LIMIT_CH_0 0x40
+#define MC_RIR_LIMIT_CH_1 0x44
+#define MC_RIR_LIMIT_CH_2 0x48
+#define MC_RIR_LIMIT_CH_3 0x4C
+#define MC_RIR_LIMIT_CH_4 0x50
+#define MC_RIR_LIMIT_CH_5 0x54
+#define MC_RIR_LIMIT_CH_6 0x58
+#define MC_RIR_LIMIT_CH_7 0x5C
+#define MC_RIR_LIMIT_MASK ((1 << 10) - 1)
+
+#define MC_RIR_WAY_CH 0x80
+ #define MC_RIR_WAY_OFFSET_MASK (((1 << 14) - 1) & ~0x7)
+ #define MC_RIR_WAY_RANK_MASK 0x7
+
+/*
+ * i7core structs
+ */
+
+#define NUM_CHANS 3
+#define MAX_DIMMS 3 /* Max DIMMS per channel */
+#define MAX_MCR_FUNC 4
+#define MAX_CHAN_FUNC 3
+
+struct i7core_info {
+ u32 mc_control;
+ u32 mc_status;
+ u32 max_dod;
+ u32 ch_map;
+};
+
+
+struct i7core_inject {
+ int enable;
+
+ u32 section;
+ u32 type;
+ u32 eccmask;
+
+ /* Error address mask */
+ int channel, dimm, rank, bank, page, col;
+};
+
+struct i7core_channel {
+ u32 ranks;
+ u32 dimms;
+};
+
+struct pci_id_descr {
+ int dev;
+ int func;
+ int dev_id;
+ int optional;
+};
+
+struct pci_id_table {
+ struct pci_id_descr *descr;
+ int n_devs;
+};
+
+struct i7core_dev {
+ struct list_head list;
+ u8 socket;
+ struct pci_dev **pdev;
+ int n_devs;
+ struct mem_ctl_info *mci;
+};
+
+struct i7core_pvt {
+ struct pci_dev *pci_noncore;
+ struct pci_dev *pci_mcr[MAX_MCR_FUNC + 1];
+ struct pci_dev *pci_ch[NUM_CHANS][MAX_CHAN_FUNC + 1];
+
+ struct i7core_dev *i7core_dev;
+
+ struct i7core_info info;
+ struct i7core_inject inject;
+ struct i7core_channel channel[NUM_CHANS];
+
+ int channels; /* Number of active channels */
+
+ int ce_count_available;
+ int csrow_map[NUM_CHANS][MAX_DIMMS];
+
+ /* ECC corrected errors counts per udimm */
+ unsigned long udimm_ce_count[MAX_DIMMS];
+ int udimm_last_ce_count[MAX_DIMMS];
+ /* ECC corrected errors counts per rdimm */
+ unsigned long rdimm_ce_count[NUM_CHANS][MAX_DIMMS];
+ int rdimm_last_ce_count[NUM_CHANS][MAX_DIMMS];
+
+ unsigned int is_registered;
+
+ /* mcelog glue */
+ struct edac_mce edac_mce;
+
+ /* Fifo double buffers */
+ struct mce mce_entry[MCE_LOG_LEN];
+ struct mce mce_outentry[MCE_LOG_LEN];
+
+ /* Fifo in/out counters */
+ unsigned mce_in, mce_out;
+
+ /* Count indicator to show errors not got */
+ unsigned mce_overrun;
+};
+
+/* Static vars */
+static LIST_HEAD(i7core_edac_list);
+static DEFINE_MUTEX(i7core_edac_lock);
+
+#define PCI_DESCR(device, function, device_id) \
+ .dev = (device), \
+ .func = (function), \
+ .dev_id = (device_id)
+
+struct pci_id_descr pci_dev_descr_i7core_nehalem[] = {
+ /* Memory controller */
+ { PCI_DESCR(3, 0, PCI_DEVICE_ID_INTEL_I7_MCR) },
+ { PCI_DESCR(3, 1, PCI_DEVICE_ID_INTEL_I7_MC_TAD) },
+ /* Exists only for RDIMM */
+ { PCI_DESCR(3, 2, PCI_DEVICE_ID_INTEL_I7_MC_RAS), .optional = 1 },
+ { PCI_DESCR(3, 4, PCI_DEVICE_ID_INTEL_I7_MC_TEST) },
+
+ /* Channel 0 */
+ { PCI_DESCR(4, 0, PCI_DEVICE_ID_INTEL_I7_MC_CH0_CTRL) },
+ { PCI_DESCR(4, 1, PCI_DEVICE_ID_INTEL_I7_MC_CH0_ADDR) },
+ { PCI_DESCR(4, 2, PCI_DEVICE_ID_INTEL_I7_MC_CH0_RANK) },
+ { PCI_DESCR(4, 3, PCI_DEVICE_ID_INTEL_I7_MC_CH0_TC) },
+
+ /* Channel 1 */
+ { PCI_DESCR(5, 0, PCI_DEVICE_ID_INTEL_I7_MC_CH1_CTRL) },
+ { PCI_DESCR(5, 1, PCI_DEVICE_ID_INTEL_I7_MC_CH1_ADDR) },
+ { PCI_DESCR(5, 2, PCI_DEVICE_ID_INTEL_I7_MC_CH1_RANK) },
+ { PCI_DESCR(5, 3, PCI_DEVICE_ID_INTEL_I7_MC_CH1_TC) },
+
+ /* Channel 2 */
+ { PCI_DESCR(6, 0, PCI_DEVICE_ID_INTEL_I7_MC_CH2_CTRL) },
+ { PCI_DESCR(6, 1, PCI_DEVICE_ID_INTEL_I7_MC_CH2_ADDR) },
+ { PCI_DESCR(6, 2, PCI_DEVICE_ID_INTEL_I7_MC_CH2_RANK) },
+ { PCI_DESCR(6, 3, PCI_DEVICE_ID_INTEL_I7_MC_CH2_TC) },
+
+ /* Generic Non-core registers */
+ /*
+ * This is the PCI device on i7core and on Xeon 35xx (8086:2c41)
+ * On Xeon 55xx, however, it has a different id (8086:2c40). So,
+ * the probing code needs to test for the other address in case of
+ * failure of this one
+ */
+ { PCI_DESCR(0, 0, PCI_DEVICE_ID_INTEL_I7_NONCORE) },
+
+};
+
+struct pci_id_descr pci_dev_descr_lynnfield[] = {
+ { PCI_DESCR( 3, 0, PCI_DEVICE_ID_INTEL_LYNNFIELD_MCR) },
+ { PCI_DESCR( 3, 1, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_TAD) },
+ { PCI_DESCR( 3, 4, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_TEST) },
+
+ { PCI_DESCR( 4, 0, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_CTRL) },
+ { PCI_DESCR( 4, 1, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_ADDR) },
+ { PCI_DESCR( 4, 2, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_RANK) },
+ { PCI_DESCR( 4, 3, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_TC) },
+
+ { PCI_DESCR( 5, 0, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_CTRL) },
+ { PCI_DESCR( 5, 1, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_ADDR) },
+ { PCI_DESCR( 5, 2, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_RANK) },
+ { PCI_DESCR( 5, 3, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_TC) },
+
+ /*
+ * This is the PCI device has an alternate address on some
+ * processors like Core i7 860
+ */
+ { PCI_DESCR( 0, 0, PCI_DEVICE_ID_INTEL_LYNNFIELD_NONCORE) },
+};
+
+struct pci_id_descr pci_dev_descr_i7core_westmere[] = {
+ /* Memory controller */
+ { PCI_DESCR(3, 0, PCI_DEVICE_ID_INTEL_LYNNFIELD_MCR_REV2) },
+ { PCI_DESCR(3, 1, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_TAD_REV2) },
+ /* Exists only for RDIMM */
+ { PCI_DESCR(3, 2, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_RAS_REV2), .optional = 1 },
+ { PCI_DESCR(3, 4, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_TEST_REV2) },
+
+ /* Channel 0 */
+ { PCI_DESCR(4, 0, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_CTRL_REV2) },
+ { PCI_DESCR(4, 1, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_ADDR_REV2) },
+ { PCI_DESCR(4, 2, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_RANK_REV2) },
+ { PCI_DESCR(4, 3, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_TC_REV2) },
+
+ /* Channel 1 */
+ { PCI_DESCR(5, 0, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_CTRL_REV2) },
+ { PCI_DESCR(5, 1, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_ADDR_REV2) },
+ { PCI_DESCR(5, 2, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_RANK_REV2) },
+ { PCI_DESCR(5, 3, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_TC_REV2) },
+
+ /* Channel 2 */
+ { PCI_DESCR(6, 0, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH2_CTRL_REV2) },
+ { PCI_DESCR(6, 1, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH2_ADDR_REV2) },
+ { PCI_DESCR(6, 2, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH2_RANK_REV2) },
+ { PCI_DESCR(6, 3, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH2_TC_REV2) },
+
+ /* Generic Non-core registers */
+ { PCI_DESCR(0, 0, PCI_DEVICE_ID_INTEL_LYNNFIELD_NONCORE_REV2) },
+
+};
+
+#define PCI_ID_TABLE_ENTRY(A) { A, ARRAY_SIZE(A) }
+struct pci_id_table pci_dev_table[] = {
+ PCI_ID_TABLE_ENTRY(pci_dev_descr_i7core_nehalem),
+ PCI_ID_TABLE_ENTRY(pci_dev_descr_lynnfield),
+ PCI_ID_TABLE_ENTRY(pci_dev_descr_i7core_westmere),
+};
+
+/*
+ * pci_device_id table for which devices we are looking for
+ */
+static const struct pci_device_id i7core_pci_tbl[] __devinitdata = {
+ {PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_X58_HUB_MGMT)},
+ {PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_LYNNFIELD_QPI_LINK0)},
+ {0,} /* 0 terminated list. */
+};
+
+static struct edac_pci_ctl_info *i7core_pci;
+
+/****************************************************************************
+ Anciliary status routines
+ ****************************************************************************/
+
+ /* MC_CONTROL bits */
+#define CH_ACTIVE(pvt, ch) ((pvt)->info.mc_control & (1 << (8 + ch)))
+#define ECCx8(pvt) ((pvt)->info.mc_control & (1 << 1))
+
+ /* MC_STATUS bits */
+#define ECC_ENABLED(pvt) ((pvt)->info.mc_status & (1 << 4))
+#define CH_DISABLED(pvt, ch) ((pvt)->info.mc_status & (1 << ch))
+
+ /* MC_MAX_DOD read functions */
+static inline int numdimms(u32 dimms)
+{
+ return (dimms & 0x3) + 1;
+}
+
+static inline int numrank(u32 rank)
+{
+ static int ranks[4] = { 1, 2, 4, -EINVAL };
+
+ return ranks[rank & 0x3];
+}
+
+static inline int numbank(u32 bank)
+{
+ static int banks[4] = { 4, 8, 16, -EINVAL };
+
+ return banks[bank & 0x3];
+}
+
+static inline int numrow(u32 row)
+{
+ static int rows[8] = {
+ 1 << 12, 1 << 13, 1 << 14, 1 << 15,
+ 1 << 16, -EINVAL, -EINVAL, -EINVAL,
+ };
+
+ return rows[row & 0x7];
+}
+
+static inline int numcol(u32 col)
+{
+ static int cols[8] = {
+ 1 << 10, 1 << 11, 1 << 12, -EINVAL,
+ };
+ return cols[col & 0x3];
+}
+
+static struct i7core_dev *get_i7core_dev(u8 socket)
+{
+ struct i7core_dev *i7core_dev;
+
+ list_for_each_entry(i7core_dev, &i7core_edac_list, list) {
+ if (i7core_dev->socket == socket)
+ return i7core_dev;
+ }
+
+ return NULL;
+}
+
+/****************************************************************************
+ Memory check routines
+ ****************************************************************************/
+static struct pci_dev *get_pdev_slot_func(u8 socket, unsigned slot,
+ unsigned func)
+{
+ struct i7core_dev *i7core_dev = get_i7core_dev(socket);
+ int i;
+
+ if (!i7core_dev)
+ return NULL;
+
+ for (i = 0; i < i7core_dev->n_devs; i++) {
+ if (!i7core_dev->pdev[i])
+ continue;
+
+ if (PCI_SLOT(i7core_dev->pdev[i]->devfn) == slot &&
+ PCI_FUNC(i7core_dev->pdev[i]->devfn) == func) {
+ return i7core_dev->pdev[i];
+ }
+ }
+
+ return NULL;
+}
+
+/**
+ * i7core_get_active_channels() - gets the number of channels and csrows
+ * @socket: Quick Path Interconnect socket
+ * @channels: Number of channels that will be returned
+ * @csrows: Number of csrows found
+ *
+ * Since EDAC core needs to know in advance the number of available channels
+ * and csrows, in order to allocate memory for csrows/channels, it is needed
+ * to run two similar steps. At the first step, implemented on this function,
+ * it checks the number of csrows/channels present at one socket.
+ * this is used in order to properly allocate the size of mci components.
+ *
+ * It should be noticed that none of the current available datasheets explain
+ * or even mention how csrows are seen by the memory controller. So, we need
+ * to add a fake description for csrows.
+ * So, this driver is attributing one DIMM memory for one csrow.
+ */
+static int i7core_get_active_channels(u8 socket, unsigned *channels,
+ unsigned *csrows)
+{
+ struct pci_dev *pdev = NULL;
+ int i, j;
+ u32 status, control;
+
+ *channels = 0;
+ *csrows = 0;
+
+ pdev = get_pdev_slot_func(socket, 3, 0);
+ if (!pdev) {
+ i7core_printk(KERN_ERR, "Couldn't find socket %d fn 3.0!!!\n",
+ socket);
+ return -ENODEV;
+ }
+
+ /* Device 3 function 0 reads */
+ pci_read_config_dword(pdev, MC_STATUS, &status);
+ pci_read_config_dword(pdev, MC_CONTROL, &control);
+
+ for (i = 0; i < NUM_CHANS; i++) {
+ u32 dimm_dod[3];
+ /* Check if the channel is active */
+ if (!(control & (1 << (8 + i))))
+ continue;
+
+ /* Check if the channel is disabled */
+ if (status & (1 << i))
+ continue;
+
+ pdev = get_pdev_slot_func(socket, i + 4, 1);
+ if (!pdev) {
+ i7core_printk(KERN_ERR, "Couldn't find socket %d "
+ "fn %d.%d!!!\n",
+ socket, i + 4, 1);
+ return -ENODEV;
+ }
+ /* Devices 4-6 function 1 */
+ pci_read_config_dword(pdev,
+ MC_DOD_CH_DIMM0, &dimm_dod[0]);
+ pci_read_config_dword(pdev,
+ MC_DOD_CH_DIMM1, &dimm_dod[1]);
+ pci_read_config_dword(pdev,
+ MC_DOD_CH_DIMM2, &dimm_dod[2]);
+
+ (*channels)++;
+
+ for (j = 0; j < 3; j++) {
+ if (!DIMM_PRESENT(dimm_dod[j]))
+ continue;
+ (*csrows)++;
+ }
+ }
+
+ debugf0("Number of active channels on socket %d: %d\n",
+ socket, *channels);
+
+ return 0;
+}
+
+static int get_dimm_config(struct mem_ctl_info *mci, int *csrow)
+{
+ struct i7core_pvt *pvt = mci->pvt_info;
+ struct csrow_info *csr;
+ struct pci_dev *pdev;
+ int i, j;
+ unsigned long last_page = 0;
+ enum edac_type mode;
+ enum mem_type mtype;
+
+ /* Get data from the MC register, function 0 */
+ pdev = pvt->pci_mcr[0];
+ if (!pdev)
+ return -ENODEV;
+
+ /* Device 3 function 0 reads */
+ pci_read_config_dword(pdev, MC_CONTROL, &pvt->info.mc_control);
+ pci_read_config_dword(pdev, MC_STATUS, &pvt->info.mc_status);
+ pci_read_config_dword(pdev, MC_MAX_DOD, &pvt->info.max_dod);
+ pci_read_config_dword(pdev, MC_CHANNEL_MAPPER, &pvt->info.ch_map);
+
+ debugf0("QPI %d control=0x%08x status=0x%08x dod=0x%08x map=0x%08x\n",
+ pvt->i7core_dev->socket, pvt->info.mc_control, pvt->info.mc_status,
+ pvt->info.max_dod, pvt->info.ch_map);
+
+ if (ECC_ENABLED(pvt)) {
+ debugf0("ECC enabled with x%d SDCC\n", ECCx8(pvt) ? 8 : 4);
+ if (ECCx8(pvt))
+ mode = EDAC_S8ECD8ED;
+ else
+ mode = EDAC_S4ECD4ED;
+ } else {
+ debugf0("ECC disabled\n");
+ mode = EDAC_NONE;
+ }
+
+ /* FIXME: need to handle the error codes */
+ debugf0("DOD Max limits: DIMMS: %d, %d-ranked, %d-banked "
+ "x%x x 0x%x\n",
+ numdimms(pvt->info.max_dod),
+ numrank(pvt->info.max_dod >> 2),
+ numbank(pvt->info.max_dod >> 4),
+ numrow(pvt->info.max_dod >> 6),
+ numcol(pvt->info.max_dod >> 9));
+
+ for (i = 0; i < NUM_CHANS; i++) {
+ u32 data, dimm_dod[3], value[8];
+
+ if (!pvt->pci_ch[i][0])
+ continue;
+
+ if (!CH_ACTIVE(pvt, i)) {
+ debugf0("Channel %i is not active\n", i);
+ continue;
+ }
+ if (CH_DISABLED(pvt, i)) {
+ debugf0("Channel %i is disabled\n", i);
+ continue;
+ }
+
+ /* Devices 4-6 function 0 */
+ pci_read_config_dword(pvt->pci_ch[i][0],
+ MC_CHANNEL_DIMM_INIT_PARAMS, &data);
+
+ pvt->channel[i].ranks = (data & QUAD_RANK_PRESENT) ?
+ 4 : 2;
+
+ if (data & REGISTERED_DIMM)
+ mtype = MEM_RDDR3;
+ else
+ mtype = MEM_DDR3;
+#if 0
+ if (data & THREE_DIMMS_PRESENT)
+ pvt->channel[i].dimms = 3;
+ else if (data & SINGLE_QUAD_RANK_PRESENT)
+ pvt->channel[i].dimms = 1;
+ else
+ pvt->channel[i].dimms = 2;
+#endif
+
+ /* Devices 4-6 function 1 */
+ pci_read_config_dword(pvt->pci_ch[i][1],
+ MC_DOD_CH_DIMM0, &dimm_dod[0]);
+ pci_read_config_dword(pvt->pci_ch[i][1],
+ MC_DOD_CH_DIMM1, &dimm_dod[1]);
+ pci_read_config_dword(pvt->pci_ch[i][1],
+ MC_DOD_CH_DIMM2, &dimm_dod[2]);
+
+ debugf0("Ch%d phy rd%d, wr%d (0x%08x): "
+ "%d ranks, %cDIMMs\n",
+ i,
+ RDLCH(pvt->info.ch_map, i), WRLCH(pvt->info.ch_map, i),
+ data,
+ pvt->channel[i].ranks,
+ (data & REGISTERED_DIMM) ? 'R' : 'U');
+
+ for (j = 0; j < 3; j++) {
+ u32 banks, ranks, rows, cols;
+ u32 size, npages;
+
+ if (!DIMM_PRESENT(dimm_dod[j]))
+ continue;
+
+ banks = numbank(MC_DOD_NUMBANK(dimm_dod[j]));
+ ranks = numrank(MC_DOD_NUMRANK(dimm_dod[j]));
+ rows = numrow(MC_DOD_NUMROW(dimm_dod[j]));
+ cols = numcol(MC_DOD_NUMCOL(dimm_dod[j]));
+
+ /* DDR3 has 8 I/O banks */
+ size = (rows * cols * banks * ranks) >> (20 - 3);
+
+ pvt->channel[i].dimms++;
+
+ debugf0("\tdimm %d %d Mb offset: %x, "
+ "bank: %d, rank: %d, row: %#x, col: %#x\n",
+ j, size,
+ RANKOFFSET(dimm_dod[j]),
+ banks, ranks, rows, cols);
+
+#if PAGE_SHIFT > 20
+ npages = size >> (PAGE_SHIFT - 20);
+#else
+ npages = size << (20 - PAGE_SHIFT);
+#endif
+
+ csr = &mci->csrows[*csrow];
+ csr->first_page = last_page + 1;
+ last_page += npages;
+ csr->last_page = last_page;
+ csr->nr_pages = npages;
+
+ csr->page_mask = 0;
+ csr->grain = 8;
+ csr->csrow_idx = *csrow;
+ csr->nr_channels = 1;
+
+ csr->channels[0].chan_idx = i;
+ csr->channels[0].ce_count = 0;
+
+ pvt->csrow_map[i][j] = *csrow;
+
+ switch (banks) {
+ case 4:
+ csr->dtype = DEV_X4;
+ break;
+ case 8:
+ csr->dtype = DEV_X8;
+ break;
+ case 16:
+ csr->dtype = DEV_X16;
+ break;
+ default:
+ csr->dtype = DEV_UNKNOWN;
+ }
+
+ csr->edac_mode = mode;
+ csr->mtype = mtype;
+
+ (*csrow)++;
+ }
+
+ pci_read_config_dword(pdev, MC_SAG_CH_0, &value[0]);
+ pci_read_config_dword(pdev, MC_SAG_CH_1, &value[1]);
+ pci_read_config_dword(pdev, MC_SAG_CH_2, &value[2]);
+ pci_read_config_dword(pdev, MC_SAG_CH_3, &value[3]);
+ pci_read_config_dword(pdev, MC_SAG_CH_4, &value[4]);
+ pci_read_config_dword(pdev, MC_SAG_CH_5, &value[5]);
+ pci_read_config_dword(pdev, MC_SAG_CH_6, &value[6]);
+ pci_read_config_dword(pdev, MC_SAG_CH_7, &value[7]);
+ debugf1("\t[%i] DIVBY3\tREMOVED\tOFFSET\n", i);
+ for (j = 0; j < 8; j++)
+ debugf1("\t\t%#x\t%#x\t%#x\n",
+ (value[j] >> 27) & 0x1,
+ (value[j] >> 24) & 0x7,
+ (value[j] && ((1 << 24) - 1)));
+ }
+
+ return 0;
+}
+
+/****************************************************************************
+ Error insertion routines
+ ****************************************************************************/
+
+/* The i7core has independent error injection features per channel.
+ However, to have a simpler code, we don't allow enabling error injection
+ on more than one channel.
+ Also, since a change at an inject parameter will be applied only at enable,
+ we're disabling error injection on all write calls to the sysfs nodes that
+ controls the error code injection.
+ */
+static int disable_inject(struct mem_ctl_info *mci)
+{
+ struct i7core_pvt *pvt = mci->pvt_info;
+
+ pvt->inject.enable = 0;
+
+ if (!pvt->pci_ch[pvt->inject.channel][0])
+ return -ENODEV;
+
+ pci_write_config_dword(pvt->pci_ch[pvt->inject.channel][0],
+ MC_CHANNEL_ERROR_INJECT, 0);
+
+ return 0;
+}
+
+/*
+ * i7core inject inject.section
+ *
+ * accept and store error injection inject.section value
+ * bit 0 - refers to the lower 32-byte half cacheline
+ * bit 1 - refers to the upper 32-byte half cacheline
+ */
+static ssize_t i7core_inject_section_store(struct mem_ctl_info *mci,
+ const char *data, size_t count)
+{
+ struct i7core_pvt *pvt = mci->pvt_info;
+ unsigned long value;
+ int rc;
+
+ if (pvt->inject.enable)
+ disable_inject(mci);
+
+ rc = strict_strtoul(data, 10, &value);
+ if ((rc < 0) || (value > 3))
+ return -EIO;
+
+ pvt->inject.section = (u32) value;
+ return count;
+}
+
+static ssize_t i7core_inject_section_show(struct mem_ctl_info *mci,
+ char *data)
+{
+ struct i7core_pvt *pvt = mci->pvt_info;
+ return sprintf(data, "0x%08x\n", pvt->inject.section);
+}
+
+/*
+ * i7core inject.type
+ *
+ * accept and store error injection inject.section value
+ * bit 0 - repeat enable - Enable error repetition
+ * bit 1 - inject ECC error
+ * bit 2 - inject parity error
+ */
+static ssize_t i7core_inject_type_store(struct mem_ctl_info *mci,
+ const char *data, size_t count)
+{
+ struct i7core_pvt *pvt = mci->pvt_info;
+ unsigned long value;
+ int rc;
+
+ if (pvt->inject.enable)
+ disable_inject(mci);
+
+ rc = strict_strtoul(data, 10, &value);
+ if ((rc < 0) || (value > 7))
+ return -EIO;
+
+ pvt->inject.type = (u32) value;
+ return count;
+}
+
+static ssize_t i7core_inject_type_show(struct mem_ctl_info *mci,
+ char *data)
+{
+ struct i7core_pvt *pvt = mci->pvt_info;
+ return sprintf(data, "0x%08x\n", pvt->inject.type);
+}
+
+/*
+ * i7core_inject_inject.eccmask_store
+ *
+ * The type of error (UE/CE) will depend on the inject.eccmask value:
+ * Any bits set to a 1 will flip the corresponding ECC bit
+ * Correctable errors can be injected by flipping 1 bit or the bits within
+ * a symbol pair (2 consecutive aligned 8-bit pairs - i.e. 7:0 and 15:8 or
+ * 23:16 and 31:24). Flipping bits in two symbol pairs will cause an
+ * uncorrectable error to be injected.
+ */
+static ssize_t i7core_inject_eccmask_store(struct mem_ctl_info *mci,
+ const char *data, size_t count)
+{
+ struct i7core_pvt *pvt = mci->pvt_info;
+ unsigned long value;
+ int rc;
+
+ if (pvt->inject.enable)
+ disable_inject(mci);
+
+ rc = strict_strtoul(data, 10, &value);
+ if (rc < 0)
+ return -EIO;
+
+ pvt->inject.eccmask = (u32) value;
+ return count;
+}
+
+static ssize_t i7core_inject_eccmask_show(struct mem_ctl_info *mci,
+ char *data)
+{
+ struct i7core_pvt *pvt = mci->pvt_info;
+ return sprintf(data, "0x%08x\n", pvt->inject.eccmask);
+}
+
+/*
+ * i7core_addrmatch
+ *
+ * The type of error (UE/CE) will depend on the inject.eccmask value:
+ * Any bits set to a 1 will flip the corresponding ECC bit
+ * Correctable errors can be injected by flipping 1 bit or the bits within
+ * a symbol pair (2 consecutive aligned 8-bit pairs - i.e. 7:0 and 15:8 or
+ * 23:16 and 31:24). Flipping bits in two symbol pairs will cause an
+ * uncorrectable error to be injected.
+ */
+
+#define DECLARE_ADDR_MATCH(param, limit) \
+static ssize_t i7core_inject_store_##param( \
+ struct mem_ctl_info *mci, \
+ const char *data, size_t count) \
+{ \
+ struct i7core_pvt *pvt; \
+ long value; \
+ int rc; \
+ \
+ debugf1("%s()\n", __func__); \
+ pvt = mci->pvt_info; \
+ \
+ if (pvt->inject.enable) \
+ disable_inject(mci); \
+ \
+ if (!strcasecmp(data, "any") || !strcasecmp(data, "any\n"))\
+ value = -1; \
+ else { \
+ rc = strict_strtoul(data, 10, &value); \
+ if ((rc < 0) || (value >= limit)) \
+ return -EIO; \
+ } \
+ \
+ pvt->inject.param = value; \
+ \
+ return count; \
+} \
+ \
+static ssize_t i7core_inject_show_##param( \
+ struct mem_ctl_info *mci, \
+ char *data) \
+{ \
+ struct i7core_pvt *pvt; \
+ \
+ pvt = mci->pvt_info; \
+ debugf1("%s() pvt=%p\n", __func__, pvt); \
+ if (pvt->inject.param < 0) \
+ return sprintf(data, "any\n"); \
+ else \
+ return sprintf(data, "%d\n", pvt->inject.param);\
+}
+
+#define ATTR_ADDR_MATCH(param) \
+ { \
+ .attr = { \
+ .name = #param, \
+ .mode = (S_IRUGO | S_IWUSR) \
+ }, \
+ .show = i7core_inject_show_##param, \
+ .store = i7core_inject_store_##param, \
+ }
+
+DECLARE_ADDR_MATCH(channel, 3);
+DECLARE_ADDR_MATCH(dimm, 3);
+DECLARE_ADDR_MATCH(rank, 4);
+DECLARE_ADDR_MATCH(bank, 32);
+DECLARE_ADDR_MATCH(page, 0x10000);
+DECLARE_ADDR_MATCH(col, 0x4000);
+
+static int write_and_test(struct pci_dev *dev, int where, u32 val)
+{
+ u32 read;
+ int count;
+
+ debugf0("setting pci %02x:%02x.%x reg=%02x value=%08x\n",
+ dev->bus->number, PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn),
+ where, val);
+
+ for (count = 0; count < 10; count++) {
+ if (count)
+ msleep(100);
+ pci_write_config_dword(dev, where, val);
+ pci_read_config_dword(dev, where, &read);
+
+ if (read == val)
+ return 0;
+ }
+
+ i7core_printk(KERN_ERR, "Error during set pci %02x:%02x.%x reg=%02x "
+ "write=%08x. Read=%08x\n",
+ dev->bus->number, PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn),
+ where, val, read);
+
+ return -EINVAL;
+}
+
+/*
+ * This routine prepares the Memory Controller for error injection.
+ * The error will be injected when some process tries to write to the
+ * memory that matches the given criteria.
+ * The criteria can be set in terms of a mask where dimm, rank, bank, page
+ * and col can be specified.
+ * A -1 value for any of the mask items will make the MCU to ignore
+ * that matching criteria for error injection.
+ *
+ * It should be noticed that the error will only happen after a write operation
+ * on a memory that matches the condition. if REPEAT_EN is not enabled at
+ * inject mask, then it will produce just one error. Otherwise, it will repeat
+ * until the injectmask would be cleaned.
+ *
+ * FIXME: This routine assumes that MAXNUMDIMMS value of MC_MAX_DOD
+ * is reliable enough to check if the MC is using the
+ * three channels. However, this is not clear at the datasheet.
+ */
+static ssize_t i7core_inject_enable_store(struct mem_ctl_info *mci,
+ const char *data, size_t count)
+{
+ struct i7core_pvt *pvt = mci->pvt_info;
+ u32 injectmask;
+ u64 mask = 0;
+ int rc;
+ long enable;
+
+ if (!pvt->pci_ch[pvt->inject.channel][0])
+ return 0;
+
+ rc = strict_strtoul(data, 10, &enable);
+ if ((rc < 0))
+ return 0;
+
+ if (enable) {
+ pvt->inject.enable = 1;
+ } else {
+ disable_inject(mci);
+ return count;
+ }
+
+ /* Sets pvt->inject.dimm mask */
+ if (pvt->inject.dimm < 0)
+ mask |= 1LL << 41;
+ else {
+ if (pvt->channel[pvt->inject.channel].dimms > 2)
+ mask |= (pvt->inject.dimm & 0x3LL) << 35;
+ else
+ mask |= (pvt->inject.dimm & 0x1LL) << 36;
+ }
+
+ /* Sets pvt->inject.rank mask */
+ if (pvt->inject.rank < 0)
+ mask |= 1LL << 40;
+ else {
+ if (pvt->channel[pvt->inject.channel].dimms > 2)
+ mask |= (pvt->inject.rank & 0x1LL) << 34;
+ else
+ mask |= (pvt->inject.rank & 0x3LL) << 34;
+ }
+
+ /* Sets pvt->inject.bank mask */
+ if (pvt->inject.bank < 0)
+ mask |= 1LL << 39;
+ else
+ mask |= (pvt->inject.bank & 0x15LL) << 30;
+
+ /* Sets pvt->inject.page mask */
+ if (pvt->inject.page < 0)
+ mask |= 1LL << 38;
+ else
+ mask |= (pvt->inject.page & 0xffff) << 14;
+
+ /* Sets pvt->inject.column mask */
+ if (pvt->inject.col < 0)
+ mask |= 1LL << 37;
+ else
+ mask |= (pvt->inject.col & 0x3fff);
+
+ /*
+ * bit 0: REPEAT_EN
+ * bits 1-2: MASK_HALF_CACHELINE
+ * bit 3: INJECT_ECC
+ * bit 4: INJECT_ADDR_PARITY
+ */
+
+ injectmask = (pvt->inject.type & 1) |
+ (pvt->inject.section & 0x3) << 1 |
+ (pvt->inject.type & 0x6) << (3 - 1);
+
+ /* Unlock writes to registers - this register is write only */
+ pci_write_config_dword(pvt->pci_noncore,
+ MC_CFG_CONTROL, 0x2);
+
+ write_and_test(pvt->pci_ch[pvt->inject.channel][0],
+ MC_CHANNEL_ADDR_MATCH, mask);
+ write_and_test(pvt->pci_ch[pvt->inject.channel][0],
+ MC_CHANNEL_ADDR_MATCH + 4, mask >> 32L);
+
+ write_and_test(pvt->pci_ch[pvt->inject.channel][0],
+ MC_CHANNEL_ERROR_MASK, pvt->inject.eccmask);
+
+ write_and_test(pvt->pci_ch[pvt->inject.channel][0],
+ MC_CHANNEL_ERROR_INJECT, injectmask);
+
+ /*
+ * This is something undocumented, based on my tests
+ * Without writing 8 to this register, errors aren't injected. Not sure
+ * why.
+ */
+ pci_write_config_dword(pvt->pci_noncore,
+ MC_CFG_CONTROL, 8);
+
+ debugf0("Error inject addr match 0x%016llx, ecc 0x%08x,"
+ " inject 0x%08x\n",
+ mask, pvt->inject.eccmask, injectmask);
+
+
+ return count;
+}
+
+static ssize_t i7core_inject_enable_show(struct mem_ctl_info *mci,
+ char *data)
+{
+ struct i7core_pvt *pvt = mci->pvt_info;
+ u32 injectmask;
+
+ if (!pvt->pci_ch[pvt->inject.channel][0])
+ return 0;
+
+ pci_read_config_dword(pvt->pci_ch[pvt->inject.channel][0],
+ MC_CHANNEL_ERROR_INJECT, &injectmask);
+
+ debugf0("Inject error read: 0x%018x\n", injectmask);
+
+ if (injectmask & 0x0c)
+ pvt->inject.enable = 1;
+
+ return sprintf(data, "%d\n", pvt->inject.enable);
+}
+
+#define DECLARE_COUNTER(param) \
+static ssize_t i7core_show_counter_##param( \
+ struct mem_ctl_info *mci, \
+ char *data) \
+{ \
+ struct i7core_pvt *pvt = mci->pvt_info; \
+ \
+ debugf1("%s() \n", __func__); \
+ if (!pvt->ce_count_available || (pvt->is_registered)) \
+ return sprintf(data, "data unavailable\n"); \
+ return sprintf(data, "%lu\n", \
+ pvt->udimm_ce_count[param]); \
+}
+
+#define ATTR_COUNTER(param) \
+ { \
+ .attr = { \
+ .name = __stringify(udimm##param), \
+ .mode = (S_IRUGO | S_IWUSR) \
+ }, \
+ .show = i7core_show_counter_##param \
+ }
+
+DECLARE_COUNTER(0);
+DECLARE_COUNTER(1);
+DECLARE_COUNTER(2);
+
+/*
+ * Sysfs struct
+ */
+
+
+static struct mcidev_sysfs_attribute i7core_addrmatch_attrs[] = {
+ ATTR_ADDR_MATCH(channel),
+ ATTR_ADDR_MATCH(dimm),
+ ATTR_ADDR_MATCH(rank),
+ ATTR_ADDR_MATCH(bank),
+ ATTR_ADDR_MATCH(page),
+ ATTR_ADDR_MATCH(col),
+ { .attr = { .name = NULL } }
+};
+
+static struct mcidev_sysfs_group i7core_inject_addrmatch = {
+ .name = "inject_addrmatch",
+ .mcidev_attr = i7core_addrmatch_attrs,
+};
+
+static struct mcidev_sysfs_attribute i7core_udimm_counters_attrs[] = {
+ ATTR_COUNTER(0),
+ ATTR_COUNTER(1),
+ ATTR_COUNTER(2),
+};
+
+static struct mcidev_sysfs_group i7core_udimm_counters = {
+ .name = "all_channel_counts",
+ .mcidev_attr = i7core_udimm_counters_attrs,
+};
+
+static struct mcidev_sysfs_attribute i7core_sysfs_attrs[] = {
+ {
+ .attr = {
+ .name = "inject_section",
+ .mode = (S_IRUGO | S_IWUSR)
+ },
+ .show = i7core_inject_section_show,
+ .store = i7core_inject_section_store,
+ }, {
+ .attr = {
+ .name = "inject_type",
+ .mode = (S_IRUGO | S_IWUSR)
+ },
+ .show = i7core_inject_type_show,
+ .store = i7core_inject_type_store,
+ }, {
+ .attr = {
+ .name = "inject_eccmask",
+ .mode = (S_IRUGO | S_IWUSR)
+ },
+ .show = i7core_inject_eccmask_show,
+ .store = i7core_inject_eccmask_store,
+ }, {
+ .grp = &i7core_inject_addrmatch,
+ }, {
+ .attr = {
+ .name = "inject_enable",
+ .mode = (S_IRUGO | S_IWUSR)
+ },
+ .show = i7core_inject_enable_show,
+ .store = i7core_inject_enable_store,
+ },
+ { .attr = { .name = NULL } }, /* Reserved for udimm counters */
+ { .attr = { .name = NULL } }
+};
+
+/****************************************************************************
+ Device initialization routines: put/get, init/exit
+ ****************************************************************************/
+
+/*
+ * i7core_put_devices 'put' all the devices that we have
+ * reserved via 'get'
+ */
+static void i7core_put_devices(struct i7core_dev *i7core_dev)
+{
+ int i;
+
+ debugf0(__FILE__ ": %s()\n", __func__);
+ for (i = 0; i < i7core_dev->n_devs; i++) {
+ struct pci_dev *pdev = i7core_dev->pdev[i];
+ if (!pdev)
+ continue;
+ debugf0("Removing dev %02x:%02x.%d\n",
+ pdev->bus->number,
+ PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn));
+ pci_dev_put(pdev);
+ }
+ kfree(i7core_dev->pdev);
+ list_del(&i7core_dev->list);
+ kfree(i7core_dev);
+}
+
+static void i7core_put_all_devices(void)
+{
+ struct i7core_dev *i7core_dev, *tmp;
+
+ list_for_each_entry_safe(i7core_dev, tmp, &i7core_edac_list, list)
+ i7core_put_devices(i7core_dev);
+}
+
+static void __init i7core_xeon_pci_fixup(struct pci_id_table *table)
+{
+ struct pci_dev *pdev = NULL;
+ int i;
+ /*
+ * On Xeon 55xx, the Intel Quckpath Arch Generic Non-core pci buses
+ * aren't announced by acpi. So, we need to use a legacy scan probing
+ * to detect them
+ */
+ while (table && table->descr) {
+ pdev = pci_get_device(PCI_VENDOR_ID_INTEL, table->descr[0].dev_id, NULL);
+ if (unlikely(!pdev)) {
+ for (i = 0; i < MAX_SOCKET_BUSES; i++)
+ pcibios_scan_specific_bus(255-i);
+ }
+ table++;
+ }
+}
+
+/*
+ * i7core_get_devices Find and perform 'get' operation on the MCH's
+ * device/functions we want to reference for this driver
+ *
+ * Need to 'get' device 16 func 1 and func 2
+ */
+int i7core_get_onedevice(struct pci_dev **prev, int devno,
+ struct pci_id_descr *dev_descr, unsigned n_devs)
+{
+ struct i7core_dev *i7core_dev;
+
+ struct pci_dev *pdev = NULL;
+ u8 bus = 0;
+ u8 socket = 0;
+
+ pdev = pci_get_device(PCI_VENDOR_ID_INTEL,
+ dev_descr->dev_id, *prev);
+
+ /*
+ * On Xeon 55xx, the Intel Quckpath Arch Generic Non-core regs
+ * is at addr 8086:2c40, instead of 8086:2c41. So, we need
+ * to probe for the alternate address in case of failure
+ */
+ if (dev_descr->dev_id == PCI_DEVICE_ID_INTEL_I7_NONCORE && !pdev)
+ pdev = pci_get_device(PCI_VENDOR_ID_INTEL,
+ PCI_DEVICE_ID_INTEL_I7_NONCORE_ALT, *prev);
+
+ if (dev_descr->dev_id == PCI_DEVICE_ID_INTEL_LYNNFIELD_NONCORE && !pdev)
+ pdev = pci_get_device(PCI_VENDOR_ID_INTEL,
+ PCI_DEVICE_ID_INTEL_LYNNFIELD_NONCORE_ALT,
+ *prev);
+
+ if (!pdev) {
+ if (*prev) {
+ *prev = pdev;
+ return 0;
+ }
+
+ if (dev_descr->optional)
+ return 0;
+
+ if (devno == 0)
+ return -ENODEV;
+
+ i7core_printk(KERN_ERR,
+ "Device not found: dev %02x.%d PCI ID %04x:%04x\n",
+ dev_descr->dev, dev_descr->func,
+ PCI_VENDOR_ID_INTEL, dev_descr->dev_id);
+
+ /* End of list, leave */
+ return -ENODEV;
+ }
+ bus = pdev->bus->number;
+
+ if (bus == 0x3f)
+ socket = 0;
+ else
+ socket = 255 - bus;
+
+ i7core_dev = get_i7core_dev(socket);
+ if (!i7core_dev) {
+ i7core_dev = kzalloc(sizeof(*i7core_dev), GFP_KERNEL);
+ if (!i7core_dev)
+ return -ENOMEM;
+ i7core_dev->pdev = kzalloc(sizeof(*i7core_dev->pdev) * n_devs,
+ GFP_KERNEL);
+ if (!i7core_dev->pdev) {
+ kfree(i7core_dev);
+ return -ENOMEM;
+ }
+ i7core_dev->socket = socket;
+ i7core_dev->n_devs = n_devs;
+ list_add_tail(&i7core_dev->list, &i7core_edac_list);
+ }
+
+ if (i7core_dev->pdev[devno]) {
+ i7core_printk(KERN_ERR,
+ "Duplicated device for "
+ "dev %02x:%02x.%d PCI ID %04x:%04x\n",
+ bus, dev_descr->dev, dev_descr->func,
+ PCI_VENDOR_ID_INTEL, dev_descr->dev_id);
+ pci_dev_put(pdev);
+ return -ENODEV;
+ }
+
+ i7core_dev->pdev[devno] = pdev;
+
+ /* Sanity check */
+ if (unlikely(PCI_SLOT(pdev->devfn) != dev_descr->dev ||
+ PCI_FUNC(pdev->devfn) != dev_descr->func)) {
+ i7core_printk(KERN_ERR,
+ "Device PCI ID %04x:%04x "
+ "has dev %02x:%02x.%d instead of dev %02x:%02x.%d\n",
+ PCI_VENDOR_ID_INTEL, dev_descr->dev_id,
+ bus, PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn),
+ bus, dev_descr->dev, dev_descr->func);
+ return -ENODEV;
+ }
+
+ /* Be sure that the device is enabled */
+ if (unlikely(pci_enable_device(pdev) < 0)) {
+ i7core_printk(KERN_ERR,
+ "Couldn't enable "
+ "dev %02x:%02x.%d PCI ID %04x:%04x\n",
+ bus, dev_descr->dev, dev_descr->func,
+ PCI_VENDOR_ID_INTEL, dev_descr->dev_id);
+ return -ENODEV;
+ }
+
+ debugf0("Detected socket %d dev %02x:%02x.%d PCI ID %04x:%04x\n",
+ socket, bus, dev_descr->dev,
+ dev_descr->func,
+ PCI_VENDOR_ID_INTEL, dev_descr->dev_id);
+
+ *prev = pdev;
+
+ return 0;
+}
+
+static int i7core_get_devices(struct pci_id_table *table)
+{
+ int i, rc;
+ struct pci_dev *pdev = NULL;
+ struct pci_id_descr *dev_descr;
+
+ while (table && table->descr) {
+ dev_descr = table->descr;
+ for (i = 0; i < table->n_devs; i++) {
+ pdev = NULL;
+ do {
+ rc = i7core_get_onedevice(&pdev, i, &dev_descr[i],
+ table->n_devs);
+ if (rc < 0) {
+ if (i == 0) {
+ i = table->n_devs;
+ break;
+ }
+ i7core_put_all_devices();
+ return -ENODEV;
+ }
+ } while (pdev);
+ }
+ table++;
+ }
+
+ return 0;
+ return 0;
+}
+
+static int mci_bind_devs(struct mem_ctl_info *mci,
+ struct i7core_dev *i7core_dev)
+{
+ struct i7core_pvt *pvt = mci->pvt_info;
+ struct pci_dev *pdev;
+ int i, func, slot;
+
+ /* Associates i7core_dev and mci for future usage */
+ pvt->i7core_dev = i7core_dev;
+ i7core_dev->mci = mci;
+
+ pvt->is_registered = 0;
+ for (i = 0; i < i7core_dev->n_devs; i++) {
+ pdev = i7core_dev->pdev[i];
+ if (!pdev)
+ continue;
+
+ func = PCI_FUNC(pdev->devfn);
+ slot = PCI_SLOT(pdev->devfn);
+ if (slot == 3) {
+ if (unlikely(func > MAX_MCR_FUNC))
+ goto error;
+ pvt->pci_mcr[func] = pdev;
+ } else if (likely(slot >= 4 && slot < 4 + NUM_CHANS)) {
+ if (unlikely(func > MAX_CHAN_FUNC))
+ goto error;
+ pvt->pci_ch[slot - 4][func] = pdev;
+ } else if (!slot && !func)
+ pvt->pci_noncore = pdev;
+ else
+ goto error;
+
+ debugf0("Associated fn %d.%d, dev = %p, socket %d\n",
+ PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn),
+ pdev, i7core_dev->socket);
+
+ if (PCI_SLOT(pdev->devfn) == 3 &&
+ PCI_FUNC(pdev->devfn) == 2)
+ pvt->is_registered = 1;
+ }
+
+ /*
+ * Add extra nodes to count errors on udimm
+ * For registered memory, this is not needed, since the counters
+ * are already displayed at the standard locations
+ */
+ if (!pvt->is_registered)
+ i7core_sysfs_attrs[ARRAY_SIZE(i7core_sysfs_attrs)-2].grp =
+ &i7core_udimm_counters;
+
+ return 0;
+
+error:
+ i7core_printk(KERN_ERR, "Device %d, function %d "
+ "is out of the expected range\n",
+ slot, func);
+ return -EINVAL;
+}
+
+/****************************************************************************
+ Error check routines
+ ****************************************************************************/
+static void i7core_rdimm_update_csrow(struct mem_ctl_info *mci,
+ int chan, int dimm, int add)
+{
+ char *msg;
+ struct i7core_pvt *pvt = mci->pvt_info;
+ int row = pvt->csrow_map[chan][dimm], i;
+
+ for (i = 0; i < add; i++) {
+ msg = kasprintf(GFP_KERNEL, "Corrected error "
+ "(Socket=%d channel=%d dimm=%d)",
+ pvt->i7core_dev->socket, chan, dimm);
+
+ edac_mc_handle_fbd_ce(mci, row, 0, msg);
+ kfree (msg);
+ }
+}
+
+static void i7core_rdimm_update_ce_count(struct mem_ctl_info *mci,
+ int chan, int new0, int new1, int new2)
+{
+ struct i7core_pvt *pvt = mci->pvt_info;
+ int add0 = 0, add1 = 0, add2 = 0;
+ /* Updates CE counters if it is not the first time here */
+ if (pvt->ce_count_available) {
+ /* Updates CE counters */
+
+ add2 = new2 - pvt->rdimm_last_ce_count[chan][2];
+ add1 = new1 - pvt->rdimm_last_ce_count[chan][1];
+ add0 = new0 - pvt->rdimm_last_ce_count[chan][0];
+
+ if (add2 < 0)
+ add2 += 0x7fff;
+ pvt->rdimm_ce_count[chan][2] += add2;
+
+ if (add1 < 0)
+ add1 += 0x7fff;
+ pvt->rdimm_ce_count[chan][1] += add1;
+
+ if (add0 < 0)
+ add0 += 0x7fff;
+ pvt->rdimm_ce_count[chan][0] += add0;
+ } else
+ pvt->ce_count_available = 1;
+
+ /* Store the new values */
+ pvt->rdimm_last_ce_count[chan][2] = new2;
+ pvt->rdimm_last_ce_count[chan][1] = new1;
+ pvt->rdimm_last_ce_count[chan][0] = new0;
+
+ /*updated the edac core */
+ if (add0 != 0)
+ i7core_rdimm_update_csrow(mci, chan, 0, add0);
+ if (add1 != 0)
+ i7core_rdimm_update_csrow(mci, chan, 1, add1);
+ if (add2 != 0)
+ i7core_rdimm_update_csrow(mci, chan, 2, add2);
+
+}
+
+static void i7core_rdimm_check_mc_ecc_err(struct mem_ctl_info *mci)
+{
+ struct i7core_pvt *pvt = mci->pvt_info;
+ u32 rcv[3][2];
+ int i, new0, new1, new2;
+
+ /*Read DEV 3: FUN 2: MC_COR_ECC_CNT regs directly*/
+ pci_read_config_dword(pvt->pci_mcr[2], MC_COR_ECC_CNT_0,
+ &rcv[0][0]);
+ pci_read_config_dword(pvt->pci_mcr[2], MC_COR_ECC_CNT_1,
+ &rcv[0][1]);
+ pci_read_config_dword(pvt->pci_mcr[2], MC_COR_ECC_CNT_2,
+ &rcv[1][0]);
+ pci_read_config_dword(pvt->pci_mcr[2], MC_COR_ECC_CNT_3,
+ &rcv[1][1]);
+ pci_read_config_dword(pvt->pci_mcr[2], MC_COR_ECC_CNT_4,
+ &rcv[2][0]);
+ pci_read_config_dword(pvt->pci_mcr[2], MC_COR_ECC_CNT_5,
+ &rcv[2][1]);
+ for (i = 0 ; i < 3; i++) {
+ debugf3("MC_COR_ECC_CNT%d = 0x%x; MC_COR_ECC_CNT%d = 0x%x\n",
+ (i * 2), rcv[i][0], (i * 2) + 1, rcv[i][1]);
+ /*if the channel has 3 dimms*/
+ if (pvt->channel[i].dimms > 2) {
+ new0 = DIMM_BOT_COR_ERR(rcv[i][0]);
+ new1 = DIMM_TOP_COR_ERR(rcv[i][0]);
+ new2 = DIMM_BOT_COR_ERR(rcv[i][1]);
+ } else {
+ new0 = DIMM_TOP_COR_ERR(rcv[i][0]) +
+ DIMM_BOT_COR_ERR(rcv[i][0]);
+ new1 = DIMM_TOP_COR_ERR(rcv[i][1]) +
+ DIMM_BOT_COR_ERR(rcv[i][1]);
+ new2 = 0;
+ }
+
+ i7core_rdimm_update_ce_count(mci, i, new0, new1, new2);
+ }
+}
+
+/* This function is based on the device 3 function 4 registers as described on:
+ * Intel Xeon Processor 5500 Series Datasheet Volume 2
+ * http://www.intel.com/Assets/PDF/datasheet/321322.pdf
+ * also available at:
+ * http://www.arrownac.com/manufacturers/intel/s/nehalem/5500-datasheet-v2.pdf
+ */
+static void i7core_udimm_check_mc_ecc_err(struct mem_ctl_info *mci)
+{
+ struct i7core_pvt *pvt = mci->pvt_info;
+ u32 rcv1, rcv0;
+ int new0, new1, new2;
+
+ if (!pvt->pci_mcr[4]) {
+ debugf0("%s MCR registers not found\n", __func__);
+ return;
+ }
+
+ /* Corrected test errors */
+ pci_read_config_dword(pvt->pci_mcr[4], MC_TEST_ERR_RCV1, &rcv1);
+ pci_read_config_dword(pvt->pci_mcr[4], MC_TEST_ERR_RCV0, &rcv0);
+
+ /* Store the new values */
+ new2 = DIMM2_COR_ERR(rcv1);
+ new1 = DIMM1_COR_ERR(rcv0);
+ new0 = DIMM0_COR_ERR(rcv0);
+
+ /* Updates CE counters if it is not the first time here */
+ if (pvt->ce_count_available) {
+ /* Updates CE counters */
+ int add0, add1, add2;
+
+ add2 = new2 - pvt->udimm_last_ce_count[2];
+ add1 = new1 - pvt->udimm_last_ce_count[1];
+ add0 = new0 - pvt->udimm_last_ce_count[0];
+
+ if (add2 < 0)
+ add2 += 0x7fff;
+ pvt->udimm_ce_count[2] += add2;
+
+ if (add1 < 0)
+ add1 += 0x7fff;
+ pvt->udimm_ce_count[1] += add1;
+
+ if (add0 < 0)
+ add0 += 0x7fff;
+ pvt->udimm_ce_count[0] += add0;
+
+ if (add0 | add1 | add2)
+ i7core_printk(KERN_ERR, "New Corrected error(s): "
+ "dimm0: +%d, dimm1: +%d, dimm2 +%d\n",
+ add0, add1, add2);
+ } else
+ pvt->ce_count_available = 1;
+
+ /* Store the new values */
+ pvt->udimm_last_ce_count[2] = new2;
+ pvt->udimm_last_ce_count[1] = new1;
+ pvt->udimm_last_ce_count[0] = new0;
+}
+
+/*
+ * According with tables E-11 and E-12 of chapter E.3.3 of Intel 64 and IA-32
+ * Architectures Software Developer’s Manual Volume 3B.
+ * Nehalem are defined as family 0x06, model 0x1a
+ *
+ * The MCA registers used here are the following ones:
+ * struct mce field MCA Register
+ * m->status MSR_IA32_MC8_STATUS
+ * m->addr MSR_IA32_MC8_ADDR
+ * m->misc MSR_IA32_MC8_MISC
+ * In the case of Nehalem, the error information is masked at .status and .misc
+ * fields
+ */
+static void i7core_mce_output_error(struct mem_ctl_info *mci,
+ struct mce *m)
+{
+ struct i7core_pvt *pvt = mci->pvt_info;
+ char *type, *optype, *err, *msg;
+ unsigned long error = m->status & 0x1ff0000l;
+ u32 optypenum = (m->status >> 4) & 0x07;
+ u32 core_err_cnt = (m->status >> 38) && 0x7fff;
+ u32 dimm = (m->misc >> 16) & 0x3;
+ u32 channel = (m->misc >> 18) & 0x3;
+ u32 syndrome = m->misc >> 32;
+ u32 errnum = find_first_bit(&error, 32);
+ int csrow;
+
+ if (m->mcgstatus & 1)
+ type = "FATAL";
+ else
+ type = "NON_FATAL";
+
+ switch (optypenum) {
+ case 0:
+ optype = "generic undef request";
+ break;
+ case 1:
+ optype = "read error";
+ break;
+ case 2:
+ optype = "write error";
+ break;
+ case 3:
+ optype = "addr/cmd error";
+ break;
+ case 4:
+ optype = "scrubbing error";
+ break;
+ default:
+ optype = "reserved";
+ break;
+ }
+
+ switch (errnum) {
+ case 16:
+ err = "read ECC error";
+ break;
+ case 17:
+ err = "RAS ECC error";
+ break;
+ case 18:
+ err = "write parity error";
+ break;
+ case 19:
+ err = "redundacy loss";
+ break;
+ case 20:
+ err = "reserved";
+ break;
+ case 21:
+ err = "memory range error";
+ break;
+ case 22:
+ err = "RTID out of range";
+ break;
+ case 23:
+ err = "address parity error";
+ break;
+ case 24:
+ err = "byte enable parity error";
+ break;
+ default:
+ err = "unknown";
+ }
+
+ /* FIXME: should convert addr into bank and rank information */
+ msg = kasprintf(GFP_ATOMIC,
+ "%s (addr = 0x%08llx, cpu=%d, Dimm=%d, Channel=%d, "
+ "syndrome=0x%08x, count=%d, Err=%08llx:%08llx (%s: %s))\n",
+ type, (long long) m->addr, m->cpu, dimm, channel,
+ syndrome, core_err_cnt, (long long)m->status,
+ (long long)m->misc, optype, err);
+
+ debugf0("%s", msg);
+
+ csrow = pvt->csrow_map[channel][dimm];
+
+ /* Call the helper to output message */
+ if (m->mcgstatus & 1)
+ edac_mc_handle_fbd_ue(mci, csrow, 0,
+ 0 /* FIXME: should be channel here */, msg);
+ else if (!pvt->is_registered)
+ edac_mc_handle_fbd_ce(mci, csrow,
+ 0 /* FIXME: should be channel here */, msg);
+
+ kfree(msg);
+}
+
+/*
+ * i7core_check_error Retrieve and process errors reported by the
+ * hardware. Called by the Core module.
+ */
+static void i7core_check_error(struct mem_ctl_info *mci)
+{
+ struct i7core_pvt *pvt = mci->pvt_info;
+ int i;
+ unsigned count = 0;
+ struct mce *m;
+
+ /*
+ * MCE first step: Copy all mce errors into a temporary buffer
+ * We use a double buffering here, to reduce the risk of
+ * loosing an error.
+ */
+ smp_rmb();
+ count = (pvt->mce_out + MCE_LOG_LEN - pvt->mce_in)
+ % MCE_LOG_LEN;
+ if (!count)
+ goto check_ce_error;
+
+ m = pvt->mce_outentry;
+ if (pvt->mce_in + count > MCE_LOG_LEN) {
+ unsigned l = MCE_LOG_LEN - pvt->mce_in;
+
+ memcpy(m, &pvt->mce_entry[pvt->mce_in], sizeof(*m) * l);
+ smp_wmb();
+ pvt->mce_in = 0;
+ count -= l;
+ m += l;
+ }
+ memcpy(m, &pvt->mce_entry[pvt->mce_in], sizeof(*m) * count);
+ smp_wmb();
+ pvt->mce_in += count;
+
+ smp_rmb();
+ if (pvt->mce_overrun) {
+ i7core_printk(KERN_ERR, "Lost %d memory errors\n",
+ pvt->mce_overrun);
+ smp_wmb();
+ pvt->mce_overrun = 0;
+ }
+
+ /*
+ * MCE second step: parse errors and display
+ */
+ for (i = 0; i < count; i++)
+ i7core_mce_output_error(mci, &pvt->mce_outentry[i]);
+
+ /*
+ * Now, let's increment CE error counts
+ */
+check_ce_error:
+ if (!pvt->is_registered)
+ i7core_udimm_check_mc_ecc_err(mci);
+ else
+ i7core_rdimm_check_mc_ecc_err(mci);
+}
+
+/*
+ * i7core_mce_check_error Replicates mcelog routine to get errors
+ * This routine simply queues mcelog errors, and
+ * return. The error itself should be handled later
+ * by i7core_check_error.
+ * WARNING: As this routine should be called at NMI time, extra care should
+ * be taken to avoid deadlocks, and to be as fast as possible.
+ */
+static int i7core_mce_check_error(void *priv, struct mce *mce)
+{
+ struct mem_ctl_info *mci = priv;
+ struct i7core_pvt *pvt = mci->pvt_info;
+
+ /*
+ * Just let mcelog handle it if the error is
+ * outside the memory controller
+ */
+ if (((mce->status & 0xffff) >> 7) != 1)
+ return 0;
+
+ /* Bank 8 registers are the only ones that we know how to handle */
+ if (mce->bank != 8)
+ return 0;
+
+#ifdef CONFIG_SMP
+ /* Only handle if it is the right mc controller */
+ if (cpu_data(mce->cpu).phys_proc_id != pvt->i7core_dev->socket)
+ return 0;
+#endif
+
+ smp_rmb();
+ if ((pvt->mce_out + 1) % MCE_LOG_LEN == pvt->mce_in) {
+ smp_wmb();
+ pvt->mce_overrun++;
+ return 0;
+ }
+
+ /* Copy memory error at the ringbuffer */
+ memcpy(&pvt->mce_entry[pvt->mce_out], mce, sizeof(*mce));
+ smp_wmb();
+ pvt->mce_out = (pvt->mce_out + 1) % MCE_LOG_LEN;
+
+ /* Handle fatal errors immediately */
+ if (mce->mcgstatus & 1)
+ i7core_check_error(mci);
+
+ /* Advice mcelog that the error were handled */
+ return 1;
+}
+
+static int i7core_register_mci(struct i7core_dev *i7core_dev,
+ int num_channels, int num_csrows)
+{
+ struct mem_ctl_info *mci;
+ struct i7core_pvt *pvt;
+ int csrow = 0;
+ int rc;
+
+ /* allocate a new MC control structure */
+ mci = edac_mc_alloc(sizeof(*pvt), num_csrows, num_channels,
+ i7core_dev->socket);
+ if (unlikely(!mci))
+ return -ENOMEM;
+
+ debugf0("MC: " __FILE__ ": %s(): mci = %p\n", __func__, mci);
+
+ /* record ptr to the generic device */
+ mci->dev = &i7core_dev->pdev[0]->dev;
+
+ pvt = mci->pvt_info;
+ memset(pvt, 0, sizeof(*pvt));
+
+ /*
+ * FIXME: how to handle RDDR3 at MCI level? It is possible to have
+ * Mixed RDDR3/UDDR3 with Nehalem, provided that they are on different
+ * memory channels
+ */
+ mci->mtype_cap = MEM_FLAG_DDR3;
+ mci->edac_ctl_cap = EDAC_FLAG_NONE;
+ mci->edac_cap = EDAC_FLAG_NONE;
+ mci->mod_name = "i7core_edac.c";
+ mci->mod_ver = I7CORE_REVISION;
+ mci->ctl_name = kasprintf(GFP_KERNEL, "i7 core #%d",
+ i7core_dev->socket);
+ mci->dev_name = pci_name(i7core_dev->pdev[0]);
+ mci->ctl_page_to_phys = NULL;
+ mci->mc_driver_sysfs_attributes = i7core_sysfs_attrs;
+ /* Set the function pointer to an actual operation function */
+ mci->edac_check = i7core_check_error;
+
+ /* Store pci devices at mci for faster access */
+ rc = mci_bind_devs(mci, i7core_dev);
+ if (unlikely(rc < 0))
+ goto fail;
+
+ /* Get dimm basic config */
+ get_dimm_config(mci, &csrow);
+
+ /* add this new MC control structure to EDAC's list of MCs */
+ if (unlikely(edac_mc_add_mc(mci))) {
+ debugf0("MC: " __FILE__
+ ": %s(): failed edac_mc_add_mc()\n", __func__);
+ /* FIXME: perhaps some code should go here that disables error
+ * reporting if we just enabled it
+ */
+
+ rc = -EINVAL;
+ goto fail;
+ }
+
+ /* allocating generic PCI control info */
+ i7core_pci = edac_pci_create_generic_ctl(&i7core_dev->pdev[0]->dev,
+ EDAC_MOD_STR);
+ if (unlikely(!i7core_pci)) {
+ printk(KERN_WARNING
+ "%s(): Unable to create PCI control\n",
+ __func__);
+ printk(KERN_WARNING
+ "%s(): PCI error report via EDAC not setup\n",
+ __func__);
+ }
+
+ /* Default error mask is any memory */
+ pvt->inject.channel = 0;
+ pvt->inject.dimm = -1;
+ pvt->inject.rank = -1;
+ pvt->inject.bank = -1;
+ pvt->inject.page = -1;
+ pvt->inject.col = -1;
+
+ /* Registers on edac_mce in order to receive memory errors */
+ pvt->edac_mce.priv = mci;
+ pvt->edac_mce.check_error = i7core_mce_check_error;
+
+ rc = edac_mce_register(&pvt->edac_mce);
+ if (unlikely(rc < 0)) {
+ debugf0("MC: " __FILE__
+ ": %s(): failed edac_mce_register()\n", __func__);
+ }
+
+fail:
+ if (rc < 0)
+ edac_mc_free(mci);
+ return rc;
+}
+
+/*
+ * i7core_probe Probe for ONE instance of device to see if it is
+ * present.
+ * return:
+ * 0 for FOUND a device
+ * < 0 for error code
+ */
+static int __devinit i7core_probe(struct pci_dev *pdev,
+ const struct pci_device_id *id)
+{
+ int dev_idx = id->driver_data;
+ int rc;
+ struct i7core_dev *i7core_dev;
+
+ /*
+ * All memory controllers are allocated at the first pass.
+ */
+ if (unlikely(dev_idx >= 1))
+ return -EINVAL;
+
+ /* get the pci devices we want to reserve for our use */
+ mutex_lock(&i7core_edac_lock);
+
+ rc = i7core_get_devices(pci_dev_table);
+ if (unlikely(rc < 0))
+ goto fail0;
+
+ list_for_each_entry(i7core_dev, &i7core_edac_list, list) {
+ int channels;
+ int csrows;
+
+ /* Check the number of active and not disabled channels */
+ rc = i7core_get_active_channels(i7core_dev->socket,
+ &channels, &csrows);
+ if (unlikely(rc < 0))
+ goto fail1;
+
+ rc = i7core_register_mci(i7core_dev, channels, csrows);
+ if (unlikely(rc < 0))
+ goto fail1;
+ }
+
+ i7core_printk(KERN_INFO, "Driver loaded.\n");
+
+ mutex_unlock(&i7core_edac_lock);
+ return 0;
+
+fail1:
+ i7core_put_all_devices();
+fail0:
+ mutex_unlock(&i7core_edac_lock);
+ return rc;
+}
+
+/*
+ * i7core_remove destructor for one instance of device
+ *
+ */
+static void __devexit i7core_remove(struct pci_dev *pdev)
+{
+ struct mem_ctl_info *mci;
+ struct i7core_dev *i7core_dev, *tmp;
+
+ debugf0(__FILE__ ": %s()\n", __func__);
+
+ if (i7core_pci)
+ edac_pci_release_generic_ctl(i7core_pci);
+
+ /*
+ * we have a trouble here: pdev value for removal will be wrong, since
+ * it will point to the X58 register used to detect that the machine
+ * is a Nehalem or upper design. However, due to the way several PCI
+ * devices are grouped together to provide MC functionality, we need
+ * to use a different method for releasing the devices
+ */
+
+ mutex_lock(&i7core_edac_lock);
+ list_for_each_entry_safe(i7core_dev, tmp, &i7core_edac_list, list) {
+ mci = edac_mc_del_mc(&i7core_dev->pdev[0]->dev);
+ if (mci) {
+ struct i7core_pvt *pvt = mci->pvt_info;
+
+ i7core_dev = pvt->i7core_dev;
+ edac_mce_unregister(&pvt->edac_mce);
+ kfree(mci->ctl_name);
+ edac_mc_free(mci);
+ i7core_put_devices(i7core_dev);
+ } else {
+ i7core_printk(KERN_ERR,
+ "Couldn't find mci for socket %d\n",
+ i7core_dev->socket);
+ }
+ }
+ mutex_unlock(&i7core_edac_lock);
+}
+
+MODULE_DEVICE_TABLE(pci, i7core_pci_tbl);
+
+/*
+ * i7core_driver pci_driver structure for this module
+ *
+ */
+static struct pci_driver i7core_driver = {
+ .name = "i7core_edac",
+ .probe = i7core_probe,
+ .remove = __devexit_p(i7core_remove),
+ .id_table = i7core_pci_tbl,
+};
+
+/*
+ * i7core_init Module entry function
+ * Try to initialize this module for its devices
+ */
+static int __init i7core_init(void)
+{
+ int pci_rc;
+
+ debugf2("MC: " __FILE__ ": %s()\n", __func__);
+
+ /* Ensure that the OPSTATE is set correctly for POLL or NMI */
+ opstate_init();
+
+ i7core_xeon_pci_fixup(pci_dev_table);
+
+ pci_rc = pci_register_driver(&i7core_driver);
+
+ if (pci_rc >= 0)
+ return 0;
+
+ i7core_printk(KERN_ERR, "Failed to register device with error %d.\n",
+ pci_rc);
+
+ return pci_rc;
+}
+
+/*
+ * i7core_exit() Module exit function
+ * Unregister the driver
+ */
+static void __exit i7core_exit(void)
+{
+ debugf2("MC: " __FILE__ ": %s()\n", __func__);
+ pci_unregister_driver(&i7core_driver);
+}
+
+module_init(i7core_init);
+module_exit(i7core_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
+MODULE_AUTHOR("Red Hat Inc. (http://www.redhat.com)");
+MODULE_DESCRIPTION("MC Driver for Intel i7 Core memory controllers - "
+ I7CORE_REVISION);
+
+module_param(edac_op_state, int, 0444);
+MODULE_PARM_DESC(edac_op_state, "EDAC Error Reporting state: 0=Poll,1=NMI");
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-24 14:32:15 +0000