summaryrefslogtreecommitdiffstats
path: root/drivers
diff options
context:
space:
mode:
Diffstat (limited to 'drivers')
-rw-r--r--drivers/dma/mv_xor.c2
-rw-r--r--drivers/mtd/nand/orion_nand.c2
-rw-r--r--drivers/pcmcia/pxa2xx_palmtx.c49
-rw-r--r--drivers/serial/Kconfig1
-rw-r--r--drivers/usb/host/ehci-orion.c2
-rw-r--r--drivers/video/pxafb.c68
-rw-r--r--drivers/watchdog/s3c2410_wdt.c2
7 files changed, 92 insertions, 34 deletions
diff --git a/drivers/dma/mv_xor.c b/drivers/dma/mv_xor.c
index a4e4494663b..0328da020a1 100644
--- a/drivers/dma/mv_xor.c
+++ b/drivers/dma/mv_xor.c
@@ -25,7 +25,7 @@
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <linux/memory.h>
-#include <asm/plat-orion/mv_xor.h>
+#include <plat/mv_xor.h>
#include "mv_xor.h"
static void mv_xor_issue_pending(struct dma_chan *chan);
diff --git a/drivers/mtd/nand/orion_nand.c b/drivers/mtd/nand/orion_nand.c
index 64002488c6e..917cf8d3ae9 100644
--- a/drivers/mtd/nand/orion_nand.c
+++ b/drivers/mtd/nand/orion_nand.c
@@ -19,7 +19,7 @@
#include <asm/io.h>
#include <asm/sizes.h>
#include <mach/hardware.h>
-#include <asm/plat-orion/orion_nand.h>
+#include <plat/orion_nand.h>
#ifdef CONFIG_MTD_CMDLINE_PARTS
static const char *part_probes[] = { "cmdlinepart", NULL };
diff --git a/drivers/pcmcia/pxa2xx_palmtx.c b/drivers/pcmcia/pxa2xx_palmtx.c
index a8771ffc61e..e07b5c51ec5 100644
--- a/drivers/pcmcia/pxa2xx_palmtx.c
+++ b/drivers/pcmcia/pxa2xx_palmtx.c
@@ -23,12 +23,57 @@
static int palmtx_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
{
- skt->irq = IRQ_GPIO(GPIO_NR_PALMTX_PCMCIA_READY);
+ int ret;
+
+ ret = gpio_request(GPIO_NR_PALMTX_PCMCIA_POWER1, "PCMCIA PWR1");
+ if (ret)
+ goto err1;
+ ret = gpio_direction_output(GPIO_NR_PALMTX_PCMCIA_POWER1, 0);
+ if (ret)
+ goto err2;
+
+ ret = gpio_request(GPIO_NR_PALMTX_PCMCIA_POWER2, "PCMCIA PWR2");
+ if (ret)
+ goto err2;
+ ret = gpio_direction_output(GPIO_NR_PALMTX_PCMCIA_POWER2, 0);
+ if (ret)
+ goto err3;
+
+ ret = gpio_request(GPIO_NR_PALMTX_PCMCIA_RESET, "PCMCIA RST");
+ if (ret)
+ goto err3;
+ ret = gpio_direction_output(GPIO_NR_PALMTX_PCMCIA_RESET, 1);
+ if (ret)
+ goto err4;
+
+ ret = gpio_request(GPIO_NR_PALMTX_PCMCIA_READY, "PCMCIA RDY");
+ if (ret)
+ goto err4;
+ ret = gpio_direction_input(GPIO_NR_PALMTX_PCMCIA_READY);
+ if (ret)
+ goto err5;
+
+ skt->irq = gpio_to_irq(GPIO_NR_PALMTX_PCMCIA_READY);
return 0;
+
+err5:
+ gpio_free(GPIO_NR_PALMTX_PCMCIA_READY);
+err4:
+ gpio_free(GPIO_NR_PALMTX_PCMCIA_RESET);
+err3:
+ gpio_free(GPIO_NR_PALMTX_PCMCIA_POWER2);
+err2:
+ gpio_free(GPIO_NR_PALMTX_PCMCIA_POWER1);
+err1:
+ return ret;
}
static void palmtx_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt)
{
+ gpio_free(GPIO_NR_PALMTX_PCMCIA_READY);
+ gpio_free(GPIO_NR_PALMTX_PCMCIA_RESET);
+ gpio_free(GPIO_NR_PALMTX_PCMCIA_POWER2);
+ gpio_free(GPIO_NR_PALMTX_PCMCIA_POWER1);
}
static void palmtx_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
@@ -109,7 +154,7 @@ static void __exit palmtx_pcmcia_exit(void)
platform_device_unregister(palmtx_pcmcia_device);
}
-fs_initcall(palmtx_pcmcia_init);
+module_init(palmtx_pcmcia_init);
module_exit(palmtx_pcmcia_exit);
MODULE_AUTHOR("Marek Vasut <marek.vasut@gmail.com>");
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 3b4a14e355c..77cb34270fc 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -449,6 +449,7 @@ config SERIAL_CLPS711X_CONSOLE
config SERIAL_SAMSUNG
tristate "Samsung SoC serial support"
depends on ARM && PLAT_S3C24XX
+ select SERIAL_CORE
help
Support for the on-chip UARTs on the Samsung S3C24XX series CPUs,
providing /dev/ttySAC0, 1 and 2 (note, some machines may not
diff --git a/drivers/usb/host/ehci-orion.c b/drivers/usb/host/ehci-orion.c
index 5fbdc14e63b..5416cf96900 100644
--- a/drivers/usb/host/ehci-orion.c
+++ b/drivers/usb/host/ehci-orion.c
@@ -12,7 +12,7 @@
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/mbus.h>
-#include <asm/plat-orion/ehci-orion.h>
+#include <plat/ehci-orion.h>
#define rdl(off) __raw_readl(hcd->regs + (off))
#define wrl(off, val) __raw_writel((val), hcd->regs + (off))
diff --git a/drivers/video/pxafb.c b/drivers/video/pxafb.c
index e7aa7ae8fca..97204497d9f 100644
--- a/drivers/video/pxafb.c
+++ b/drivers/video/pxafb.c
@@ -1031,7 +1031,9 @@ static void pxafb_setup_gpio(struct pxafb_info *fbi)
pxa_gpio_mode(GPIO74_LCD_FCLK_MD);
pxa_gpio_mode(GPIO75_LCD_LCLK_MD);
pxa_gpio_mode(GPIO76_LCD_PCLK_MD);
- pxa_gpio_mode(GPIO77_LCD_ACBIAS_MD);
+
+ if ((lccr0 & LCCR0_PAS) == 0)
+ pxa_gpio_mode(GPIO77_LCD_ACBIAS_MD);
}
static void pxafb_enable_controller(struct pxafb_info *fbi)
@@ -1400,6 +1402,8 @@ static void pxafb_decode_mach_info(struct pxafb_info *fbi,
if (lcd_conn == LCD_MONO_STN_8BPP)
fbi->lccr0 |= LCCR0_DPD;
+ fbi->lccr0 |= (lcd_conn & LCD_ALTERNATE_MAPPING) ? LCCR0_LDDALT : 0;
+
fbi->lccr3 = LCCR3_Acb((inf->lcd_conn >> 10) & 0xff);
fbi->lccr3 |= (lcd_conn & LCD_BIAS_ACTIVE_LOW) ? LCCR3_OEP : 0;
fbi->lccr3 |= (lcd_conn & LCD_PCLK_EDGE_FALL) ? LCCR3_PCP : 0;
@@ -1673,53 +1677,63 @@ MODULE_PARM_DESC(options, "LCD parameters (see Documentation/fb/pxafb.txt)");
#define pxafb_setup_options() (0)
#endif
-static int __devinit pxafb_probe(struct platform_device *dev)
-{
- struct pxafb_info *fbi;
- struct pxafb_mach_info *inf;
- struct resource *r;
- int irq, ret;
-
- dev_dbg(&dev->dev, "pxafb_probe\n");
-
- inf = dev->dev.platform_data;
- ret = -ENOMEM;
- fbi = NULL;
- if (!inf)
- goto failed;
-
- ret = pxafb_parse_options(&dev->dev, g_options);
- if (ret < 0)
- goto failed;
-
#ifdef DEBUG_VAR
- /* Check for various illegal bit-combinations. Currently only
- * a warning is given. */
+/* Check for various illegal bit-combinations. Currently only
+ * a warning is given. */
+static void __devinit pxafb_check_options(struct device *dev,
+ struct pxafb_mach_info *inf)
+{
+ if (inf->lcd_conn)
+ return;
if (inf->lccr0 & LCCR0_INVALID_CONFIG_MASK)
- dev_warn(&dev->dev, "machine LCCR0 setting contains "
+ dev_warn(dev, "machine LCCR0 setting contains "
"illegal bits: %08x\n",
inf->lccr0 & LCCR0_INVALID_CONFIG_MASK);
if (inf->lccr3 & LCCR3_INVALID_CONFIG_MASK)
- dev_warn(&dev->dev, "machine LCCR3 setting contains "
+ dev_warn(dev, "machine LCCR3 setting contains "
"illegal bits: %08x\n",
inf->lccr3 & LCCR3_INVALID_CONFIG_MASK);
if (inf->lccr0 & LCCR0_DPD &&
((inf->lccr0 & LCCR0_PAS) != LCCR0_Pas ||
(inf->lccr0 & LCCR0_SDS) != LCCR0_Sngl ||
(inf->lccr0 & LCCR0_CMS) != LCCR0_Mono))
- dev_warn(&dev->dev, "Double Pixel Data (DPD) mode is "
+ dev_warn(dev, "Double Pixel Data (DPD) mode is "
"only valid in passive mono"
" single panel mode\n");
if ((inf->lccr0 & LCCR0_PAS) == LCCR0_Act &&
(inf->lccr0 & LCCR0_SDS) == LCCR0_Dual)
- dev_warn(&dev->dev, "Dual panel only valid in passive mode\n");
+ dev_warn(dev, "Dual panel only valid in passive mode\n");
if ((inf->lccr0 & LCCR0_PAS) == LCCR0_Pas &&
(inf->modes->upper_margin || inf->modes->lower_margin))
- dev_warn(&dev->dev, "Upper and lower margins must be 0 in "
+ dev_warn(dev, "Upper and lower margins must be 0 in "
"passive mode\n");
+}
+#else
+#define pxafb_check_options(...) do {} while (0)
#endif
+static int __devinit pxafb_probe(struct platform_device *dev)
+{
+ struct pxafb_info *fbi;
+ struct pxafb_mach_info *inf;
+ struct resource *r;
+ int irq, ret;
+
+ dev_dbg(&dev->dev, "pxafb_probe\n");
+
+ inf = dev->dev.platform_data;
+ ret = -ENOMEM;
+ fbi = NULL;
+ if (!inf)
+ goto failed;
+
+ ret = pxafb_parse_options(&dev->dev, g_options);
+ if (ret < 0)
+ goto failed;
+
+ pxafb_check_options(&dev->dev, inf);
+
dev_dbg(&dev->dev, "got a %dx%dx%d LCD\n",
inf->modes->xres,
inf->modes->yres,
diff --git a/drivers/watchdog/s3c2410_wdt.c b/drivers/watchdog/s3c2410_wdt.c
index 3da2b90d2fe..22715e3be5e 100644
--- a/drivers/watchdog/s3c2410_wdt.c
+++ b/drivers/watchdog/s3c2410_wdt.c
@@ -157,8 +157,6 @@ static void s3c2410wdt_start(void)
writel(wdt_count, wdt_base + S3C2410_WTCNT);
writel(wtcon, wdt_base + S3C2410_WTCON);
spin_unlock(&wdt_lock);
-
- return 0;
}
static int s3c2410wdt_set_heartbeat(int timeout)
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-17 15:13:06 +0000