diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/video/aty/aty128fb.c | 25 |
1 files changed, 15 insertions, 10 deletions
diff --git a/drivers/video/aty/aty128fb.c b/drivers/video/aty/aty128fb.c index fb2b0f5b23b..e6e299feb51 100644 --- a/drivers/video/aty/aty128fb.c +++ b/drivers/video/aty/aty128fb.c @@ -2374,6 +2374,8 @@ static void aty128_set_suspend(struct aty128fb_par *par, int suspend) /* Set the chip into the appropriate suspend mode (we use D2, * D3 would require a complete re-initialisation of the chip, * including PCI config registers, clocks, AGP configuration, ...) + * + * For resume, the core will have already brought us back to D0 */ if (suspend) { /* Make sure CRTC2 is reset. Remove that the day we decide to @@ -2391,17 +2393,9 @@ static void aty128_set_suspend(struct aty128fb_par *par, int suspend) aty_st_le32(BUS_CNTL1, 0x00000010); aty_st_le32(MEM_POWER_MISC, 0x0c830000); mdelay(100); - pci_read_config_word(pdev, par->pm_reg+PCI_PM_CTRL, &pwr_command); + /* Switch PCI power management to D2 */ - pci_write_config_word(pdev, par->pm_reg+PCI_PM_CTRL, - (pwr_command & ~PCI_PM_CTRL_STATE_MASK) | 2); - pci_read_config_word(pdev, par->pm_reg+PCI_PM_CTRL, &pwr_command); - } else { - /* Switch back PCI power management to D0 */ - mdelay(100); - pci_write_config_word(pdev, par->pm_reg+PCI_PM_CTRL, 0); - pci_read_config_word(pdev, par->pm_reg+PCI_PM_CTRL, &pwr_command); - mdelay(100); + pci_set_power_state(pdev, PCI_D2); } } @@ -2410,6 +2404,12 @@ static int aty128_pci_suspend(struct pci_dev *pdev, pm_message_t state) struct fb_info *info = pci_get_drvdata(pdev); struct aty128fb_par *par = info->par; + /* Because we may change PCI D state ourselves, we need to + * first save the config space content so the core can + * restore it properly on resume. + */ + pci_save_state(pdev); + /* We don't do anything but D2, for now we return 0, but * we may want to change that. How do we know if the BIOS * can properly take care of D3 ? Also, with swsusp, we @@ -2476,6 +2476,11 @@ static int aty128_do_resume(struct pci_dev *pdev) if (pdev->dev.power.power_state.event == PM_EVENT_ON) return 0; + /* PCI state will have been restored by the core, so + * we should be in D0 now with our config space fully + * restored + */ + /* Wakeup chip */ aty128_set_suspend(par, 0); par->asleep = 0; |