diff options
Diffstat (limited to 'drivers')
204 files changed, 8873 insertions, 1039 deletions
diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig index f4f63291750..b0243fd55ac 100644 --- a/drivers/acpi/Kconfig +++ b/drivers/acpi/Kconfig @@ -312,9 +312,13 @@ config ACPI_DEBUG bool "Debug Statements" default n help - The ACPI driver can optionally report errors with a great deal - of verbosity. Saying Y enables these statements. This will increase - your kernel size by around 50K. + The ACPI subsystem can produce debug output. Saying Y enables this + output and increases the kernel size by around 50K. + + Use the acpi.debug_layer and acpi.debug_level kernel command-line + parameters documented in Documentation/acpi/debug.txt and + Documentation/kernel-parameters.txt to control the type and + amount of debug output. config ACPI_DEBUG_FUNC_TRACE bool "Additionally enable ACPI function tracing" @@ -324,14 +328,6 @@ config ACPI_DEBUG_FUNC_TRACE ACPI Debug Statements slow down ACPI processing. Function trace is about half of the penalty and is rarely useful. -config ACPI_EC - bool - default y - help - This driver is required on some systems for the proper operation of - the battery and thermal drivers. If you are compiling for a - mobile system, say Y. - config ACPI_PCI_SLOT tristate "PCI slot detection driver" default n @@ -341,10 +337,6 @@ config ACPI_PCI_SLOT help you correlate PCI bus addresses with the physical geography of your slots. If you are unsure, say N. -config ACPI_POWER - bool - default y - config ACPI_SYSTEM bool default y diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile index d91c027ece8..3c0c93300f1 100644 --- a/drivers/acpi/Makefile +++ b/drivers/acpi/Makefile @@ -39,19 +39,23 @@ obj-y += sleep/ obj-y += bus.o glue.o obj-y += scan.o # Keep EC driver first. Initialization of others depend on it. -obj-$(CONFIG_ACPI_EC) += ec.o +obj-y += ec.o obj-$(CONFIG_ACPI_AC) += ac.o obj-$(CONFIG_ACPI_BATTERY) += battery.o obj-$(CONFIG_ACPI_BUTTON) += button.o obj-$(CONFIG_ACPI_FAN) += fan.o obj-$(CONFIG_ACPI_DOCK) += dock.o obj-$(CONFIG_ACPI_VIDEO) += video.o +ifdef CONFIG_ACPI_VIDEO +obj-y += video_detect.o +endif + obj-y += pci_root.o pci_link.o pci_irq.o pci_bind.o obj-$(CONFIG_ACPI_PCI_SLOT) += pci_slot.o obj-$(CONFIG_ACPI_PROCESSOR) += processor.o obj-$(CONFIG_ACPI_CONTAINER) += container.o obj-$(CONFIG_ACPI_THERMAL) += thermal.o -obj-$(CONFIG_ACPI_POWER) += power.o +obj-y += power.o obj-$(CONFIG_ACPI_SYSTEM) += system.o event.o obj-$(CONFIG_ACPI_DEBUG) += debug.o obj-$(CONFIG_ACPI_NUMA) += numa.o diff --git a/drivers/acpi/ac.c b/drivers/acpi/ac.c index d72a1b6c8a9..9b917dac773 100644 --- a/drivers/acpi/ac.c +++ b/drivers/acpi/ac.c @@ -37,7 +37,6 @@ #include <acpi/acpi_bus.h> #include <acpi/acpi_drivers.h> -#define ACPI_AC_COMPONENT 0x00020000 #define ACPI_AC_CLASS "ac_adapter" #define ACPI_AC_DEVICE_NAME "AC Adapter" #define ACPI_AC_FILE_STATE "state" @@ -242,7 +241,7 @@ static void acpi_ac_notify(acpi_handle handle, u32 event, void *data) acpi_ac_get_state(ac); acpi_bus_generate_proc_event(device, event, (u32) ac->state); acpi_bus_generate_netlink_event(device->pnp.device_class, - device->dev.bus_id, event, + dev_name(&device->dev), event, (u32) ac->state); #ifdef CONFIG_ACPI_SYSFS_POWER kobject_uevent(&ac->charger.dev->kobj, KOBJ_CHANGE); diff --git a/drivers/acpi/acpi_memhotplug.c b/drivers/acpi/acpi_memhotplug.c index 71d21c51c45..63a17b55b39 100644 --- a/drivers/acpi/acpi_memhotplug.c +++ b/drivers/acpi/acpi_memhotplug.c @@ -32,7 +32,6 @@ #include <linux/memory_hotplug.h> #include <acpi/acpi_drivers.h> -#define ACPI_MEMORY_DEVICE_COMPONENT 0x08000000UL #define ACPI_MEMORY_DEVICE_CLASS "memory" #define ACPI_MEMORY_DEVICE_HID "PNP0C80" #define ACPI_MEMORY_DEVICE_NAME "Hotplug Mem Device" diff --git a/drivers/acpi/battery.c b/drivers/acpi/battery.c index b2133e89ad9..1423b0c0cd2 100644 --- a/drivers/acpi/battery.c +++ b/drivers/acpi/battery.c @@ -46,7 +46,6 @@ #define ACPI_BATTERY_VALUE_UNKNOWN 0xFFFFFFFF -#define ACPI_BATTERY_COMPONENT 0x00040000 #define ACPI_BATTERY_CLASS "battery" #define ACPI_BATTERY_DEVICE_NAME "Battery" #define ACPI_BATTERY_NOTIFY_STATUS 0x80 @@ -782,7 +781,7 @@ static void acpi_battery_notify(acpi_handle handle, u32 event, void *data) acpi_bus_generate_proc_event(device, event, acpi_battery_present(battery)); acpi_bus_generate_netlink_event(device->pnp.device_class, - device->dev.bus_id, event, + dev_name(&device->dev), event, acpi_battery_present(battery)); #ifdef CONFIG_ACPI_SYSFS_POWER /* acpi_batter_update could remove power_supply object */ diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c index c797c6473f3..7edf6d913c1 100644 --- a/drivers/acpi/bus.c +++ b/drivers/acpi/bus.c @@ -688,6 +688,14 @@ void __init acpi_early_init(void) if (acpi_disabled) return; + /* + * ACPI CA initializes acpi_dbg_level to non-zero, which means + * we get debug output merely by turning on CONFIG_ACPI_DEBUG. + * Turn it off so we don't get output unless the user specifies + * acpi.debug_level. + */ + acpi_dbg_level = 0; + printk(KERN_INFO PREFIX "Core revision %08x\n", ACPI_CA_VERSION); /* enable workarounds, unless strict ACPI spec. compliance */ @@ -774,7 +782,7 @@ static int __init acpi_bus_init(void) "Unable to initialize ACPI OS objects\n"); goto error1; } -#ifdef CONFIG_ACPI_EC + /* * ACPI 2.0 requires the EC driver to be loaded and work before * the EC device is found in the namespace (i.e. before acpi_initialize_objects() @@ -785,7 +793,6 @@ static int __init acpi_bus_init(void) */ status = acpi_ec_ecdt_probe(); /* Ignore result. Not having an ECDT is not fatal. */ -#endif status = acpi_initialize_objects(ACPI_FULL_INITIALIZATION); if (ACPI_FAILURE(status)) { diff --git a/drivers/acpi/button.c b/drivers/acpi/button.c index cb046c3fc3f..171fd914f43 100644 --- a/drivers/acpi/button.c +++ b/drivers/acpi/button.c @@ -33,7 +33,6 @@ #include <acpi/acpi_bus.h> #include <acpi/acpi_drivers.h> -#define ACPI_BUTTON_COMPONENT 0x00080000 #define ACPI_BUTTON_CLASS "button" #define ACPI_BUTTON_FILE_INFO "info" #define ACPI_BUTTON_FILE_STATE "state" @@ -479,7 +478,7 @@ static int acpi_button_add(struct acpi_device *device) device->wakeup.gpe_number, ACPI_GPE_TYPE_WAKE_RUN); acpi_enable_gpe(device->wakeup.gpe_device, - device->wakeup.gpe_number, ACPI_NOT_ISR); + device->wakeup.gpe_number); device->wakeup.state.enabled = 1; } diff --git a/drivers/acpi/cm_sbs.c b/drivers/acpi/cm_sbs.c index 4441e84b28a..307963bd104 100644 --- a/drivers/acpi/cm_sbs.c +++ b/drivers/acpi/cm_sbs.c @@ -34,7 +34,6 @@ ACPI_MODULE_NAME("cm_sbs"); #define ACPI_AC_CLASS "ac_adapter" #define ACPI_BATTERY_CLASS "battery" -#define ACPI_SBS_COMPONENT 0x00080000 #define _COMPONENT ACPI_SBS_COMPONENT static struct proc_dir_entry *acpi_ac_dir; static struct proc_dir_entry *acpi_battery_dir; @@ -105,9 +104,3 @@ void acpi_unlock_battery_dir(struct proc_dir_entry *acpi_battery_dir_param) return; } EXPORT_SYMBOL(acpi_unlock_battery_dir); - -static int __init acpi_cm_sbs_init(void) -{ - return 0; -} -subsys_initcall(acpi_cm_sbs_init); diff --git a/drivers/acpi/container.c b/drivers/acpi/container.c index 134818b265a..17020c12623 100644 --- a/drivers/acpi/container.c +++ b/drivers/acpi/container.c @@ -41,7 +41,6 @@ #define INSTALL_NOTIFY_HANDLER 1 #define UNINSTALL_NOTIFY_HANDLER 2 -#define ACPI_CONTAINER_COMPONENT 0x01000000 #define _COMPONENT ACPI_CONTAINER_COMPONENT ACPI_MODULE_NAME("container"); diff --git a/drivers/acpi/debug.c b/drivers/acpi/debug.c index abf36b4b1d1..c4839689200 100644 --- a/drivers/acpi/debug.c +++ b/drivers/acpi/debug.c @@ -44,6 +44,21 @@ static const struct acpi_dlayer acpi_debug_layers[] = { ACPI_DEBUG_INIT(ACPI_CA_DISASSEMBLER), ACPI_DEBUG_INIT(ACPI_COMPILER), ACPI_DEBUG_INIT(ACPI_TOOLS), + + ACPI_DEBUG_INIT(ACPI_BUS_COMPONENT), + ACPI_DEBUG_INIT(ACPI_AC_COMPONENT), + ACPI_DEBUG_INIT(ACPI_BATTERY_COMPONENT), + ACPI_DEBUG_INIT(ACPI_BUTTON_COMPONENT), + ACPI_DEBUG_INIT(ACPI_SBS_COMPONENT), + ACPI_DEBUG_INIT(ACPI_FAN_COMPONENT), + ACPI_DEBUG_INIT(ACPI_PCI_COMPONENT), + ACPI_DEBUG_INIT(ACPI_POWER_COMPONENT), + ACPI_DEBUG_INIT(ACPI_CONTAINER_COMPONENT), + ACPI_DEBUG_INIT(ACPI_SYSTEM_COMPONENT), + ACPI_DEBUG_INIT(ACPI_THERMAL_COMPONENT), + ACPI_DEBUG_INIT(ACPI_MEMORY_DEVICE_COMPONENT), + ACPI_DEBUG_INIT(ACPI_VIDEO_COMPONENT), + ACPI_DEBUG_INIT(ACPI_PROCESSOR_COMPONENT), }; static const struct acpi_dlevel acpi_debug_levels[] = { diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c index ef42316f89f..cf41f9fc24a 100644 --- a/drivers/acpi/ec.c +++ b/drivers/acpi/ec.c @@ -70,7 +70,7 @@ enum ec_command { #define ACPI_EC_UDELAY_GLK 1000 /* Wait 1ms max. to get global lock */ #define ACPI_EC_UDELAY 100 /* Wait 100us before polling EC again */ -#define ACPI_EC_STORM_THRESHOLD 20 /* number of false interrupts +#define ACPI_EC_STORM_THRESHOLD 8 /* number of false interrupts per one transaction */ enum { @@ -100,8 +100,11 @@ struct transaction { u8 *rdata; unsigned short irq_count; u8 command; + u8 wi; + u8 ri; u8 wlen; u8 rlen; + bool done; }; static struct acpi_ec { @@ -178,34 +181,45 @@ static int ec_transaction_done(struct acpi_ec *ec) unsigned long flags; int ret = 0; spin_lock_irqsave(&ec->curr_lock, flags); - if (!ec->curr || (!ec->curr->wlen && !ec->curr->rlen)) + if (!ec->curr || ec->curr->done) ret = 1; spin_unlock_irqrestore(&ec->curr_lock, flags); return ret; } +static void start_transaction(struct acpi_ec *ec) +{ + ec->curr->irq_count = ec->curr->wi = ec->curr->ri = 0; + ec->curr->done = false; + acpi_ec_write_cmd(ec, ec->curr->command); +} + static void gpe_transaction(struct acpi_ec *ec, u8 status) { unsigned long flags; spin_lock_irqsave(&ec->curr_lock, flags); if (!ec->curr) goto unlock; - if (ec->curr->wlen > 0) { - if ((status & ACPI_EC_FLAG_IBF) == 0) { - acpi_ec_write_data(ec, *(ec->curr->wdata++)); - --ec->curr->wlen; - } else - /* false interrupt, state didn't change */ - ++ec->curr->irq_count; - - } else if (ec->curr->rlen > 0) { + if (ec->curr->wlen > ec->curr->wi) { + if ((status & ACPI_EC_FLAG_IBF) == 0) + acpi_ec_write_data(ec, + ec->curr->wdata[ec->curr->wi++]); + else + goto err; + } else if (ec->curr->rlen > ec->curr->ri) { if ((status & ACPI_EC_FLAG_OBF) == 1) { - *(ec->curr->rdata++) = acpi_ec_read_data(ec); - --ec->curr->rlen; + ec->curr->rdata[ec->curr->ri++] = acpi_ec_read_data(ec); + if (ec->curr->rlen == ec->curr->ri) + ec->curr->done = true; } else - /* false interrupt, state didn't change */ - ++ec->curr->irq_count; - } + goto err; + } else if (ec->curr->wlen == ec->curr->wi && + (status & ACPI_EC_FLAG_IBF) == 0) + ec->curr->done = true; + goto unlock; +err: + /* false interrupt, state didn't change */ + ++ec->curr->irq_count; unlock: spin_unlock_irqrestore(&ec->curr_lock, flags); } @@ -215,6 +229,15 @@ static int acpi_ec_wait(struct acpi_ec *ec) if (wait_event_timeout(ec->wait, ec_transaction_done(ec), msecs_to_jiffies(ACPI_EC_DELAY))) return 0; + /* try restart command if we get any false interrupts */ + if (ec->curr->irq_count && + (acpi_ec_read_status(ec) & ACPI_EC_FLAG_IBF) == 0) { + pr_debug(PREFIX "controller reset, restart transaction\n"); + start_transaction(ec); + if (wait_event_timeout(ec->wait, ec_transaction_done(ec), + msecs_to_jiffies(ACPI_EC_DELAY))) + return 0; + } /* missing GPEs, switch back to poll mode */ if (printk_ratelimit()) pr_info(PREFIX "missing confirmations, " @@ -239,10 +262,10 @@ static int ec_check_sci(struct acpi_ec *ec, u8 state) static int ec_poll(struct acpi_ec *ec) { unsigned long delay = jiffies + msecs_to_jiffies(ACPI_EC_DELAY); - msleep(1); + udelay(ACPI_EC_UDELAY); while (time_before(jiffies, delay)) { gpe_transaction(ec, acpi_ec_read_status(ec)); - msleep(1); + udelay(ACPI_EC_UDELAY); if (ec_transaction_done(ec)) return 0; } @@ -259,14 +282,13 @@ static int acpi_ec_transaction_unlocked(struct acpi_ec *ec, /* disable GPE during transaction if storm is detected */ if (test_bit(EC_FLAGS_GPE_STORM, &ec->flags)) { clear_bit(EC_FLAGS_GPE_MODE, &ec->flags); - acpi_disable_gpe(NULL, ec->gpe, ACPI_NOT_ISR); + acpi_disable_gpe(NULL, ec->gpe); } /* start transaction */ spin_lock_irqsave(&ec->curr_lock, tmp); /* following two actions should be kept atomic */ - t->irq_count = 0; ec->curr = t; - acpi_ec_write_cmd(ec, ec->curr->command); + start_transaction(ec); if (ec->curr->command == ACPI_EC_COMMAND_QUERY) clear_bit(EC_FLAGS_QUERY_PENDING, &ec->flags); spin_unlock_irqrestore(&ec->curr_lock, tmp); @@ -283,10 +305,11 @@ static int acpi_ec_transaction_unlocked(struct acpi_ec *ec, /* check if we received SCI during transaction */ ec_check_sci(ec, acpi_ec_read_status(ec)); /* it is safe to enable GPE outside of transaction */ - acpi_enable_gpe(NULL, ec->gpe, ACPI_NOT_ISR); + acpi_enable_gpe(NULL, ec->gpe); } else if (test_bit(EC_FLAGS_GPE_MODE, &ec->flags) && t->irq_count > ACPI_EC_STORM_THRESHOLD) { - pr_debug(PREFIX "GPE storm detected\n"); + pr_info(PREFIX "GPE storm detected, " + "transactions will use polling mode\n"); set_bit(EC_FLAGS_GPE_STORM, &ec->flags); } return ret; @@ -558,17 +581,26 @@ static u32 acpi_ec_gpe_handler(void *data) pr_debug(PREFIX "~~~> interrupt\n"); status = acpi_ec_read_status(ec); - gpe_transaction(ec, status); - if (ec_transaction_done(ec) && (status & ACPI_EC_FLAG_IBF) == 0) - wake_up(&ec->wait); + if (test_bit(EC_FLAGS_GPE_MODE, &ec->flags)) { + gpe_transaction(ec, status); + if (ec_transaction_done(ec) && + (status & ACPI_EC_FLAG_IBF) == 0) + wake_up(&ec->wait); + } ec_check_sci(ec, status); if (!test_bit(EC_FLAGS_GPE_MODE, &ec->flags) && !test_bit(EC_FLAGS_NO_GPE, &ec->flags)) { /* this is non-query, must be confirmation */ - if (printk_ratelimit()) - pr_info(PREFIX "non-query interrupt received," + if (!test_bit(EC_FLAGS_GPE_STORM, &ec->flags)) { + if (printk_ratelimit()) + pr_info(PREFIX "non-query interrupt received," + " switching to interrupt mode\n"); + } else { + /* hush, STORM switches the mode every transaction */ + pr_debug(PREFIX "non-query interrupt received," " switching to interrupt mode\n"); + } set_bit(EC_FLAGS_GPE_MODE, &ec->flags); } return ACPI_INTERRUPT_HANDLED; @@ -736,7 +768,7 @@ static acpi_status ec_parse_device(acpi_handle handle, u32 Level, void *context, void **retval) { acpi_status status; - unsigned long long tmp; + unsigned long long tmp = 0; struct acpi_ec *ec = context; status = acpi_walk_resources(handle, METHOD_NAME__CRS, @@ -751,6 +783,7 @@ ec_parse_device(acpi_handle handle, u32 Level, void *context, void **retval) return status; ec->gpe = tmp; /* Use the global lock for all EC transactions? */ + tmp = 0; acpi_evaluate_integer(handle, "_GLK", NULL, &tmp); ec->global_lock = tmp; ec->handle = handle; @@ -868,7 +901,7 @@ static int ec_install_handlers(struct acpi_ec *ec) if (ACPI_FAILURE(status)) return -ENODEV; acpi_set_gpe_type(NULL, ec->gpe, ACPI_GPE_TYPE_RUNTIME); - acpi_enable_gpe(NULL, ec->gpe, ACPI_NOT_ISR); + acpi_enable_gpe(NULL, ec->gpe); status = acpi_install_address_space_handler(ec->handle, ACPI_ADR_SPACE_EC, &acpi_ec_space_handler, @@ -1007,7 +1040,7 @@ static int acpi_ec_suspend(struct acpi_device *device, pm_message_t state) /* Stop using GPE */ set_bit(EC_FLAGS_NO_GPE, &ec->flags); clear_bit(EC_FLAGS_GPE_MODE, &ec->flags); - acpi_disable_gpe(NULL, ec->gpe, ACPI_NOT_ISR); + acpi_disable_gpe(NULL, ec->gpe); return 0; } @@ -1016,7 +1049,7 @@ static int acpi_ec_resume(struct acpi_device *device) struct acpi_ec *ec = acpi_driver_data(device); /* Enable use of GPE back */ clear_bit(EC_FLAGS_NO_GPE, &ec->flags); - acpi_enable_gpe(NULL, ec->gpe, ACPI_NOT_ISR); + acpi_enable_gpe(NULL, ec->gpe); return 0; } diff --git a/drivers/acpi/events/evgpe.c b/drivers/acpi/events/evgpe.c index c5e53aae86f..f45c74fe745 100644 --- a/drivers/acpi/events/evgpe.c +++ b/drivers/acpi/events/evgpe.c @@ -289,8 +289,6 @@ acpi_status acpi_ev_disable_gpe(struct acpi_gpe_event_info *gpe_event_info) */ status = acpi_hw_low_disable_gpe(gpe_event_info); return_ACPI_STATUS(status); - - return_ACPI_STATUS(AE_OK); } /******************************************************************************* diff --git a/drivers/acpi/events/evxfevnt.c b/drivers/acpi/events/evxfevnt.c index 73bfd6bf962..41554f736b6 100644 --- a/drivers/acpi/events/evxfevnt.c +++ b/drivers/acpi/events/evxfevnt.c @@ -248,21 +248,15 @@ ACPI_EXPORT_SYMBOL(acpi_set_gpe_type) * DESCRIPTION: Enable an ACPI event (general purpose) * ******************************************************************************/ -acpi_status acpi_enable_gpe(acpi_handle gpe_device, u32 gpe_number, u32 flags) +acpi_status acpi_enable_gpe(acpi_handle gpe_device, u32 gpe_number) { acpi_status status = AE_OK; + acpi_cpu_flags flags; struct acpi_gpe_event_info *gpe_event_info; ACPI_FUNCTION_TRACE(acpi_enable_gpe); - /* Use semaphore lock if not executing at interrupt level */ - - if (flags & ACPI_NOT_ISR) { - status = acpi_ut_acquire_mutex(ACPI_MTX_EVENTS); - if (ACPI_FAILURE(status)) { - return_ACPI_STATUS(status); - } - } + flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock); /* Ensure that we have a valid GPE number */ @@ -277,9 +271,7 @@ acpi_status acpi_enable_gpe(acpi_handle gpe_device, u32 gpe_number, u32 flags) status = acpi_ev_enable_gpe(gpe_event_info, TRUE); unlock_and_exit: - if (flags & ACPI_NOT_ISR) { - (void)acpi_ut_release_mutex(ACPI_MTX_EVENTS); - } + acpi_os_release_lock(acpi_gbl_gpe_lock, flags); return_ACPI_STATUS(status); } @@ -299,22 +291,15 @@ ACPI_EXPORT_SYMBOL(acpi_enable_gpe) * DESCRIPTION: Disable an ACPI event (general purpose) * ******************************************************************************/ -acpi_status acpi_disable_gpe(acpi_handle gpe_device, u32 gpe_number, u32 flags) +acpi_status acpi_disable_gpe(acpi_handle gpe_device, u32 gpe_number) { acpi_status status = AE_OK; + acpi_cpu_flags flags; struct acpi_gpe_event_info *gpe_event_info; ACPI_FUNCTION_TRACE(acpi_disable_gpe); - /* Use semaphore lock if not executing at interrupt level */ - - if (flags & ACPI_NOT_ISR) { - status = acpi_ut_acquire_mutex(ACPI_MTX_EVENTS); - if (ACPI_FAILURE(status)) { - return_ACPI_STATUS(status); - } - } - + flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock); /* Ensure that we have a valid GPE number */ gpe_event_info = acpi_ev_get_gpe_event_info(gpe_device, gpe_number); @@ -325,10 +310,8 @@ acpi_status acpi_disable_gpe(acpi_handle gpe_device, u32 gpe_number, u32 flags) status = acpi_ev_disable_gpe(gpe_event_info); - unlock_and_exit: - if (flags & ACPI_NOT_ISR) { - (void)acpi_ut_release_mutex(ACPI_MTX_EVENTS); - } +unlock_and_exit: + acpi_os_release_lock(acpi_gbl_gpe_lock, flags); return_ACPI_STATUS(status); } @@ -521,6 +504,9 @@ acpi_status acpi_get_event_status(u32 event, acpi_event_status * event_status) if (value) *event_status |= ACPI_EVENT_FLAG_SET; + if (acpi_gbl_fixed_event_handlers[event].handler) + *event_status |= ACPI_EVENT_FLAG_HANDLE; + return_ACPI_STATUS(status); } @@ -571,6 +557,9 @@ acpi_get_gpe_status(acpi_handle gpe_device, status = acpi_hw_get_gpe_status(gpe_event_info, event_status); + if (gpe_event_info->flags & ACPI_GPE_DISPATCH_MASK) + *event_status |= ACPI_EVENT_FLAG_HANDLE; + unlock_and_exit: if (flags & ACPI_NOT_ISR) { (void)acpi_ut_release_mutex(ACPI_MTX_EVENTS); diff --git a/drivers/acpi/fan.c b/drivers/acpi/fan.c index 60d54d1f6b1..eaaee1660bd 100644 --- a/drivers/acpi/fan.c +++ b/drivers/acpi/fan.c @@ -34,7 +34,6 @@ #include <acpi/acpi_bus.h> #include <acpi/acpi_drivers.h> -#define ACPI_FAN_COMPONENT 0x00200000 #define ACPI_FAN_CLASS "fan" #define ACPI_FAN_FILE_STATE "state" diff --git a/drivers/acpi/glue.c b/drivers/acpi/glue.c index 24649ada08d..adec3d15810 100644 --- a/drivers/acpi/glue.c +++ b/drivers/acpi/glue.c @@ -140,6 +140,46 @@ struct device *acpi_get_physical_device(acpi_handle handle) EXPORT_SYMBOL(acpi_get_physical_device); +/* ToDo: When a PCI bridge is found, return the PCI device behind the bridge + * This should work in general, but did not on a Lenovo T61 for the + * graphics card. But this must be fixed when the PCI device is + * bound and the kernel device struct is attached to the acpi device + * Note: A success call will increase reference count by one + * Do call put_device(dev) on the returned device then + */ +struct device *acpi_get_physical_pci_device(acpi_handle handle) +{ + struct device *dev; + long long device_id; + acpi_status status; + + status = + acpi_evaluate_integer(handle, "_ADR", NULL, &device_id); + + if (ACPI_FAILURE(status)) + return NULL; + + /* We need to attempt to determine whether the _ADR refers to a + PCI device or not. There's no terribly good way to do this, + so the best we can hope for is to assume that there'll never + be a device in the host bridge */ + if (device_id >= 0x10000) { + /* It looks like a PCI device. Does it exist? */ + dev = acpi_get_physical_device(handle); + } else { + /* It doesn't look like a PCI device. Does its parent + exist? */ + acpi_handle phandle; + if (acpi_get_parent(handle, &phandle)) + return NULL; + dev = acpi_get_physical_device(phandle); + } + if (!dev) + return NULL; + return dev; +} +EXPORT_SYMBOL(acpi_get_physical_pci_device); + static int acpi_bind_one(struct device *dev, acpi_handle handle) { struct acpi_device *acpi_dev; diff --git a/drivers/acpi/pci_link.c b/drivers/acpi/pci_link.c index fcfdef7b4fd..e52ad91ce2d 100644 --- a/drivers/acpi/pci_link.c +++ b/drivers/acpi/pci_link.c @@ -531,7 +531,7 @@ int __init acpi_irq_penalty_init(void) return 0; } -static int acpi_irq_balance; /* 0: static, 1: balance */ +static int acpi_irq_balance = -1; /* 0: static, 1: balance */ static int acpi_pci_link_allocate(struct acpi_pci_link *link) { @@ -950,10 +950,17 @@ device_initcall(irqrouter_init_sysfs); static int __init acpi_pci_link_init(void) { - if (acpi_noirq) return 0; + if (acpi_irq_balance == -1) { + /* no command line switch: enable balancing in IOAPIC mode */ + if (acpi_irq_model == ACPI_IRQ_MODEL_IOAPIC) + acpi_irq_balance = 1; + else + acpi_irq_balance = 0; + } + acpi_link.count = 0; INIT_LIST_HEAD(&acpi_link.entries); diff --git a/drivers/acpi/pci_root.c b/drivers/acpi/pci_root.c index 1b8f67d21d5..642554b1b60 100644 --- a/drivers/acpi/pci_root.c +++ b/drivers/acpi/pci_root.c @@ -376,15 +376,9 @@ static int acpi_pci_root_remove(struct acpi_device *device, int type) static int __init acpi_pci_root_init(void) { - if (acpi_pci_disabled) return 0; - /* DEBUG: - acpi_dbg_layer = ACPI_PCI_COMPONENT; - acpi_dbg_level = 0xFFFFFFFF; - */ - if (acpi_bus_register_driver(&acpi_pci_root_driver) < 0) return -ENODEV; diff --git a/drivers/acpi/power.c b/drivers/acpi/power.c index a1718e56103..bb7d50dd281 100644 --- a/drivers/acpi/power.c +++ b/drivers/acpi/power.c @@ -44,9 +44,8 @@ #include <acpi/acpi_bus.h> #include <acpi/acpi_drivers.h> -#define _COMPONENT ACPI_POWER_COMPONENT +#define _COMPONENT ACPI_POWER_COMPONENT ACPI_MODULE_NAME("power"); -#define ACPI_POWER_COMPONENT 0x00800000 #define ACPI_POWER_CLASS "power_resource" #define ACPI_POWER_DEVICE_NAME "Power Resource" #define ACPI_POWER_FILE_INFO "info" @@ -153,7 +152,8 @@ static int acpi_power_get_state(acpi_handle handle, int *state) ACPI_POWER_RESOURCE_STATE_OFF; ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Resource [%s] is %s\n", - acpi_ut_get_node_name(handle), state ? "on" : "off")); + acpi_ut_get_node_name(handle), + *state ? "on" : "off")); return 0; } @@ -516,11 +516,6 @@ int acpi_power_transition(struct acpi_device *device, int state) cl = &device->power.states[device->power.state].resources; tl = &device->power.states[state].resources; - if (!cl->count && !tl->count) { - result = -ENODEV; - goto end; - } - /* TBD: Resources must be ordered. */ /* diff --git a/drivers/acpi/processor_core.c b/drivers/acpi/processor_core.c index 24a362f8034..34948362f41 100644 --- a/drivers/acpi/processor_core.c +++ b/drivers/acpi/processor_core.c @@ -59,7 +59,6 @@ #include <acpi/acpi_drivers.h> #include <acpi/processor.h> -#define ACPI_PROCESSOR_COMPONENT 0x01000000 #define ACPI_PROCESSOR_CLASS "processor" #define ACPI_PROCESSOR_DEVICE_NAME "Processor" #define ACPI_PROCESSOR_FILE_INFO "info" @@ -89,6 +88,7 @@ static int acpi_processor_handle_eject(struct acpi_processor *pr); static const struct acpi_device_id processor_device_ids[] = { + {ACPI_PROCESSOR_OBJECT_HID, 0}, {ACPI_PROCESSOR_HID, 0}, {"", 0}, }; @@ -409,7 +409,7 @@ static int acpi_processor_remove_fs(struct acpi_device *device) /* Use the acpiid in MADT to map cpus in case of SMP */ #ifndef CONFIG_SMP -static int get_cpu_id(acpi_handle handle, u32 acpi_id) {return -1;} +static int get_cpu_id(acpi_handle handle, int type, u32 acpi_id) { return -1; } #else static struct acpi_table_madt *madt; @@ -428,27 +428,35 @@ static int map_lapic_id(struct acpi_subtable_header *entry, } static int map_lsapic_id(struct acpi_subtable_header *entry, - u32 acpi_id, int *apic_id) + int device_declaration, u32 acpi_id, int *apic_id) { struct acpi_madt_local_sapic *lsapic = (struct acpi_madt_local_sapic *)entry; + u32 tmp = (lsapic->id << 8) | lsapic->eid; + /* Only check enabled APICs*/ - if (lsapic->lapic_flags & ACPI_MADT_ENABLED) { - /* First check against id */ - if (lsapic->processor_id == acpi_id) { - *apic_id = (lsapic->id << 8) | lsapic->eid; - return 1; - /* Check against optional uid */ - } else if (entry->length >= 16 && - lsapic->uid == acpi_id) { - *apic_id = lsapic->uid; - return 1; - } - } + if (!(lsapic->lapic_flags & ACPI_MADT_ENABLED)) + return 0; + + /* Device statement declaration type */ + if (device_declaration) { + if (entry->length < 16) + printk(KERN_ERR PREFIX + "Invalid LSAPIC with Device type processor (SAPIC ID %#x)\n", + tmp); + else if (lsapic->uid == acpi_id) + goto found; + /* Processor statement declaration type */ + } else if (lsapic->processor_id == acpi_id) + goto found; + return 0; +found: + *apic_id = tmp; + return 1; } -static int map_madt_entry(u32 acpi_id) +static int map_madt_entry(int type, u32 acpi_id) { unsigned long madt_end, entry; int apic_id = -1; @@ -469,7 +477,7 @@ static int map_madt_entry(u32 acpi_id) if (map_lapic_id(header, acpi_id, &apic_id)) break; } else if (header->type == ACPI_MADT_TYPE_LOCAL_SAPIC) { - if (map_lsapic_id(header, acpi_id, &apic_id)) + if (map_lsapic_id(header, type, acpi_id, &apic_id)) break; } entry += header->length; @@ -477,7 +485,7 @@ static int map_madt_entry(u32 acpi_id) return apic_id; } -static int map_mat_entry(acpi_handle handle, u32 acpi_id) +static int map_mat_entry(acpi_handle handle, int type, u32 acpi_id) { struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; union acpi_object *obj; @@ -500,7 +508,7 @@ static int map_mat_entry(acpi_handle handle, u32 acpi_id) if (header->type == ACPI_MADT_TYPE_LOCAL_APIC) { map_lapic_id(header, acpi_id, &apic_id); } else if (header->type == ACPI_MADT_TYPE_LOCAL_SAPIC) { - map_lsapic_id(header, acpi_id, &apic_id); + map_lsapic_id(header, type, acpi_id, &apic_id); } exit: @@ -509,14 +517,14 @@ exit: return apic_id; } -static int get_cpu_id(acpi_handle handle, u32 acpi_id) +static int get_cpu_id(acpi_handle handle, int type, u32 acpi_id) { int i; int apic_id = -1; - apic_id = map_mat_entry(handle, acpi_id); + apic_id = map_mat_entry(handle, type, acpi_id); if (apic_id == -1) - apic_id = map_madt_entry(acpi_id); + apic_id = map_madt_entry(type, acpi_id); if (apic_id == -1) return apic_id; @@ -532,15 +540,16 @@ static int get_cpu_id(acpi_handle handle, u32 acpi_id) Driver Interface -------------------------------------------------------------------------- */ -static int acpi_processor_get_info(struct acpi_processor *pr, unsigned has_uid) +static int acpi_processor_get_info(struct acpi_device *device) { acpi_status status = 0; union acpi_object object = { 0 }; struct acpi_buffer buffer = { sizeof(union acpi_object), &object }; - int cpu_index; + struct acpi_processor *pr; + int cpu_index, device_declaration = 0; static int cpu0_initialized; - + pr = acpi_driver_data(device); if (!pr) return -EINVAL; @@ -561,22 +570,23 @@ static int acpi_processor_get_info(struct acpi_processor *pr, unsigned has_uid) ACPI_DEBUG_PRINT((ACPI_DB_INFO, "No bus mastering arbitration control\n")); - /* Check if it is a Device with HID and UID */ - if (has_uid) { + if (!strcmp(acpi_device_hid(device), ACPI_PROCESSOR_HID)) { + /* + * Declared with "Device" statement; match _UID. + * Note that we don't handle string _UIDs yet. + */ unsigned long long value; status = acpi_evaluate_integer(pr->handle, METHOD_NAME__UID, NULL, &value); if (ACPI_FAILURE(status)) { - printk(KERN_ERR PREFIX "Evaluating processor _UID\n"); + printk(KERN_ERR PREFIX + "Evaluating processor _UID [%#x]\n", status); return -ENODEV; } + device_declaration = 1; pr->acpi_id = value; } else { - /* - * Evalute the processor object. Note that it is common on SMP to - * have the first (boot) processor with a valid PBLK address while - * all others have a NULL address. - */ + /* Declared with "Processor" statement; match ProcessorID */ status = acpi_evaluate_object(pr->handle, NULL, NULL, &buffer); if (ACPI_FAILURE(status)) { printk(KERN_ERR PREFIX "Evaluating processor object\n"); @@ -584,12 +594,13 @@ static int acpi_processor_get_info(struct acpi_processor *pr, unsigned has_uid) } /* - * TBD: Synch processor ID (via LAPIC/LSAPIC structures) on SMP. - * >>> 'acpi_get_processor_id(acpi_id, &id)' in arch/xxx/acpi.c - */ + * TBD: Synch processor ID (via LAPIC/LSAPIC structures) on SMP. + * >>> 'acpi_get_processor_id(acpi_id, &id)' in + * arch/xxx/acpi.c + */ pr->acpi_id = object.processor.proc_id; } - cpu_index = get_cpu_id(pr->handle, pr->acpi_id); + cpu_index = get_cpu_id(pr->handle, device_declaration, pr->acpi_id); /* Handle UP system running SMP kernel, with no LAPIC in MADT */ if (!cpu0_initialized && (cpu_index == -1) && @@ -661,7 +672,7 @@ static int __cpuinit acpi_processor_start(struct acpi_device *device) pr = acpi_driver_data(device); - result = acpi_processor_get_info(pr, device->flags.unique_id); + result = acpi_processor_get_info(device); if (result) { /* Processor is physically not present */ return 0; @@ -761,20 +772,20 @@ static void acpi_processor_notify(acpi_handle handle, u32 event, void *data) acpi_bus_generate_proc_event(device, event, pr->performance_platform_limit); acpi_bus_generate_netlink_event(device->pnp.device_class, - device->dev.bus_id, event, + dev_name(&device->dev), event, pr->performance_platform_limit); break; case ACPI_PROCESSOR_NOTIFY_POWER: acpi_processor_cst_has_changed(pr); acpi_bus_generate_proc_event(device, event, 0); acpi_bus_generate_netlink_event(device->pnp.device_class, - device->dev.bus_id, event, 0); + dev_name(&device->dev), event, 0); break; case ACPI_PROCESSOR_NOTIFY_THROTTLING: acpi_processor_tstate_has_changed(pr); acpi_bus_generate_proc_event(device, event, 0); acpi_bus_generate_netlink_event(device->pnp.device_class, - device->dev.bus_id, event, 0); + dev_name(&device->dev), event, 0); default: ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Unsupported event [0x%x]\n", event)); diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c index 81b40ed5379..5f8d746a9b8 100644 --- a/drivers/acpi/processor_idle.c +++ b/drivers/acpi/processor_idle.c @@ -59,7 +59,6 @@ #include <acpi/processor.h> #include <asm/processor.h> -#define ACPI_PROCESSOR_COMPONENT 0x01000000 #define ACPI_PROCESSOR_CLASS "processor" #define _COMPONENT ACPI_PROCESSOR_COMPONENT ACPI_MODULE_NAME("processor_idle"); diff --git a/drivers/acpi/processor_perflib.c b/drivers/acpi/processor_perflib.c index dbcf260ea93..0d7b772bef5 100644 --- a/drivers/acpi/processor_perflib.c +++ b/drivers/acpi/processor_perflib.c @@ -44,9 +44,9 @@ #endif #include <acpi/acpi_bus.h> +#include <acpi/acpi_drivers.h> #include <acpi/processor.h> -#define ACPI_PROCESSOR_COMPONENT 0x01000000 #define ACPI_PROCESSOR_CLASS "processor" #define ACPI_PROCESSOR_FILE_PERFORMANCE "performance" #define _COMPONENT ACPI_PROCESSOR_COMPONENT diff --git a/drivers/acpi/processor_thermal.c b/drivers/acpi/processor_thermal.c index ef34b18f95c..b1eb376fae4 100644 --- a/drivers/acpi/processor_thermal.c +++ b/drivers/acpi/processor_thermal.c @@ -40,7 +40,6 @@ #include <acpi/processor.h> #include <acpi/acpi_drivers.h> -#define ACPI_PROCESSOR_COMPONENT 0x01000000 #define ACPI_PROCESSOR_CLASS "processor" #define _COMPONENT ACPI_PROCESSOR_COMPONENT ACPI_MODULE_NAME("processor_thermal"); diff --git a/drivers/acpi/processor_throttling.c b/drivers/acpi/processor_throttling.c index 3da2df93d92..a0c38c94a8a 100644 --- a/drivers/acpi/processor_throttling.c +++ b/drivers/acpi/processor_throttling.c @@ -38,9 +38,9 @@ #include <asm/uaccess.h> #include <acpi/acpi_bus.h> +#include <acpi/acpi_drivers.h> #include <acpi/processor.h> -#define ACPI_PROCESSOR_COMPONENT 0x01000000 #define ACPI_PROCESSOR_CLASS "processor" #define _COMPONENT ACPI_PROCESSOR_COMPONENT ACPI_MODULE_NAME("processor_throttling"); diff --git a/drivers/acpi/reboot.c b/drivers/acpi/reboot.c index 755baf2ca70..a6b662c00b6 100644 --- a/drivers/acpi/reboot.c +++ b/drivers/acpi/reboot.c @@ -15,28 +15,9 @@ void acpi_reboot(void) rr = &acpi_gbl_FADT.reset_register; - /* - * Is the ACPI reset register supported? - * - * According to ACPI 3.0, FADT.flags.RESET_REG_SUP indicates - * whether the ACPI reset mechanism is supported. - * - * However, some boxes have this bit clear, yet a valid - * ACPI_RESET_REG & RESET_VALUE, and ACPI reboot is the only - * mechanism that works for them after S3. - * - * This suggests that other operating systems may not be checking - * the RESET_REG_SUP bit, and are using other means to decide - * whether to use the ACPI reboot mechanism or not. - * - * So when acpi reboot is requested, - * only the reset_register is checked. If the following - * conditions are met, it indicates that the reset register is supported. - * a. reset_register is not zero - * b. the access width is eight - * c. the bit_offset is zero - */ - if (!(rr->address) || rr->bit_width != 8 || rr->bit_offset != 0) + /* Is the reset register supported? */ + if (!(acpi_gbl_FADT.flags & ACPI_FADT_RESET_REGISTER) || + rr->bit_width != 8 || rr->bit_offset != 0) return; reset_value = acpi_gbl_FADT.reset_value; diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c index a9dda8e0f9f..bd5253ee5c8 100644 --- a/drivers/acpi/scan.c +++ b/drivers/acpi/scan.c @@ -109,8 +109,7 @@ static int acpi_bus_hot_remove_device(void *context) return 0; ACPI_DEBUG_PRINT((ACPI_DB_INFO, - "Hot-removing device %s...\n", device->dev.bus_id)); - + "Hot-removing device %s...\n", dev_name(&device->dev))); if (acpi_bus_trim(device, 1)) { printk(KERN_ERR PREFIX @@ -460,7 +459,7 @@ static int acpi_device_register(struct acpi_device *device, acpi_device_bus_id->instance_no = 0; list_add_tail(&acpi_device_bus_id->node, &acpi_bus_id_list); } - sprintf(device->dev.bus_id, "%s:%02x", acpi_device_bus_id->bus_id, acpi_device_bus_id->instance_no); + dev_set_name(&device->dev, "%s:%02x", acpi_device_bus_id->bus_id, acpi_device_bus_id->instance_no); if (device->parent) { list_add_tail(&device->node, &device->parent->children); @@ -484,7 +483,8 @@ static int acpi_device_register(struct acpi_device *device, result = acpi_device_setup_files(device); if(result) - printk(KERN_ERR PREFIX "Error creating sysfs interface for device %s\n", device->dev.bus_id); + printk(KERN_ERR PREFIX "Error creating sysfs interface for device %s\n", + dev_name(&device->dev)); device->removal_type = ACPI_BUS_REMOVAL_NORMAL; return 0; @@ -919,36 +919,6 @@ static void acpi_device_get_busid(struct acpi_device *device, } } -static int -acpi_video_bus_match(struct acpi_device *device) -{ - acpi_handle h_dummy; - - if (!device) - return -EINVAL; - - /* Since there is no HID, CID for ACPI Video drivers, we have - * to check well known required nodes for each feature we support. - */ - - /* Does this device able to support video switching ? */ - if (ACPI_SUCCESS(acpi_get_handle(device->handle, "_DOD", &h_dummy)) && - ACPI_SUCCESS(acpi_get_handle(device->handle, "_DOS", &h_dummy))) - return 0; - - /* Does this device able to retrieve a video ROM ? */ - if (ACPI_SUCCESS(acpi_get_handle(device->handle, "_ROM", &h_dummy))) - return 0; - - /* Does this device able to configure which video head to be POSTed ? */ - if (ACPI_SUCCESS(acpi_get_handle(device->handle, "_VPO", &h_dummy)) && - ACPI_SUCCESS(acpi_get_handle(device->handle, "_GPD", &h_dummy)) && - ACPI_SUCCESS(acpi_get_handle(device->handle, "_SPD", &h_dummy))) - return 0; - - return -ENODEV; -} - /* * acpi_bay_match - see if a device is an ejectable driver bay * @@ -1031,7 +1001,7 @@ static void acpi_device_set_id(struct acpi_device *device, will get autoloaded and the device might still match against another driver. */ - if (ACPI_SUCCESS(acpi_video_bus_match(device))) + if (acpi_is_video_device(device)) cid_add = ACPI_VIDEO_HID; else if (ACPI_SUCCESS(acpi_bay_match(device))) cid_add = ACPI_BAY_HID; @@ -1043,7 +1013,7 @@ static void acpi_device_set_id(struct acpi_device *device, hid = ACPI_POWER_HID; break; case ACPI_BUS_TYPE_PROCESSOR: - hid = ACPI_PROCESSOR_HID; + hid = ACPI_PROCESSOR_OBJECT_HID; break; case ACPI_BUS_TYPE_SYSTEM: hid = ACPI_SYSTEM_HID; diff --git a/drivers/acpi/sleep/proc.c b/drivers/acpi/sleep/proc.c index 631ee2ee2ca..4dbc2271acf 100644 --- a/drivers/acpi/sleep/proc.c +++ b/drivers/acpi/sleep/proc.c @@ -367,7 +367,7 @@ acpi_system_wakeup_device_seq_show(struct seq_file *seq, void *offset) if (ldev) seq_printf(seq, "%s:%s", ldev->bus ? ldev->bus->name : "no-bus", - ldev->bus_id); + dev_name(ldev)); seq_printf(seq, "\n"); put_device(ldev); diff --git a/drivers/acpi/sleep/wakeup.c b/drivers/acpi/sleep/wakeup.c index 38655eb132d..dea4c23df76 100644 --- a/drivers/acpi/sleep/wakeup.c +++ b/drivers/acpi/sleep/wakeup.c @@ -88,7 +88,7 @@ void acpi_enable_wakeup_device(u8 sleep_state) spin_unlock(&acpi_device_lock); if (!dev->wakeup.flags.run_wake) acpi_enable_gpe(dev->wakeup.gpe_device, - dev->wakeup.gpe_number, ACPI_ISR); + dev->wakeup.gpe_number); spin_lock(&acpi_device_lock); } spin_unlock(&acpi_device_lock); @@ -122,7 +122,7 @@ void acpi_disable_wakeup_device(u8 sleep_state) ACPI_GPE_TYPE_WAKE_RUN); /* Re-enable it, since set_gpe_type will disable it */ acpi_enable_gpe(dev->wakeup.gpe_device, - dev->wakeup.gpe_number, ACPI_NOT_ISR); + dev->wakeup.gpe_number); spin_lock(&acpi_device_lock); } continue; @@ -133,7 +133,7 @@ void acpi_disable_wakeup_device(u8 sleep_state) /* Never disable run-wake GPE */ if (!dev->wakeup.flags.run_wake) { acpi_disable_gpe(dev->wakeup.gpe_device, - dev->wakeup.gpe_number, ACPI_NOT_ISR); + dev->wakeup.gpe_number); acpi_clear_gpe(dev->wakeup.gpe_device, dev->wakeup.gpe_number, ACPI_NOT_ISR); } @@ -162,7 +162,7 @@ static int __init acpi_wakeup_device_init(void) dev->wakeup.gpe_number, ACPI_GPE_TYPE_WAKE_RUN); acpi_enable_gpe(dev->wakeup.gpe_device, - dev->wakeup.gpe_number, ACPI_NOT_ISR); + dev->wakeup.gpe_number); dev->wakeup.state.enabled = 1; spin_lock(&acpi_device_lock); } diff --git a/drivers/acpi/system.c b/drivers/acpi/system.c index 1d74171b794..6e4107f8240 100644 --- a/drivers/acpi/system.c +++ b/drivers/acpi/system.c @@ -78,9 +78,15 @@ static ssize_t acpi_table_show(struct kobject *kobj, container_of(bin_attr, struct acpi_table_attr, attr); struct acpi_table_header *table_header = NULL; acpi_status status; + char name[ACPI_NAME_SIZE]; + + if (strncmp(table_attr->name, "NULL", 4)) + memcpy(name, table_attr->name, ACPI_NAME_SIZE); + else + memcpy(name, "\0\0\0\0", 4); status = - acpi_get_table(table_attr->name, table_attr->instance, + acpi_get_table(name, table_attr->instance, &table_header); if (ACPI_FAILURE(status)) return -ENODEV; @@ -95,21 +101,24 @@ static void acpi_table_attr_init(struct acpi_table_attr *table_attr, struct acpi_table_header *header = NULL; struct acpi_table_attr *attr = NULL; - memcpy(table_attr->name, table_header->signature, ACPI_NAME_SIZE); + if (table_header->signature[0] != '\0') + memcpy(table_attr->name, table_header->signature, + ACPI_NAME_SIZE); + else + memcpy(table_attr->name, "NULL", 4); list_for_each_entry(attr, &acpi_table_attr_list, node) { - if (!memcmp(table_header->signature, attr->name, - ACPI_NAME_SIZE)) + if (!memcmp(table_attr->name, attr->name, ACPI_NAME_SIZE)) if (table_attr->instance < attr->instance) table_attr->instance = attr->instance; } table_attr->instance++; if (table_attr->instance > 1 || (table_attr->instance == 1 && - !acpi_get_table(table_header-> - signature, 2, - &header))) - sprintf(table_attr->name + 4, "%d", table_attr->instance); + !acpi_get_table + (table_header->signature, 2, &header))) + sprintf(table_attr->name + ACPI_NAME_SIZE, "%d", + table_attr->instance); table_attr->attr.size = 0; table_attr->attr.read = acpi_table_show; @@ -167,7 +176,6 @@ static int acpi_system_sysfs_init(void) #define COUNT_ERROR 2 /* other */ #define NUM_COUNTERS_EXTRA 3 -#define ACPI_EVENT_VALID 0x01 struct event_counter { u32 count; u32 flags; @@ -312,12 +320,6 @@ static int get_status(u32 index, acpi_event_status *status, acpi_handle *handle) } else if (index < (num_gpes + ACPI_NUM_FIXED_EVENTS)) result = acpi_get_event_status(index - num_gpes, status); - /* - * sleep/power button GPE/Fixed Event is enabled after acpi_system_init, - * check the status at runtime and mark it as valid once it's enabled - */ - if (!result && (*status & ACPI_EVENT_FLAG_ENABLED)) - all_counters[index].flags |= ACPI_EVENT_VALID; end: return result; } @@ -346,12 +348,14 @@ static ssize_t counter_show(struct kobject *kobj, if (result) goto end; - if (!(all_counters[index].flags & ACPI_EVENT_VALID)) - size += sprintf(buf + size, " invalid"); + if (!(status & ACPI_EVENT_FLAG_HANDLE)) + size += sprintf(buf + size, " invalid"); else if (status & ACPI_EVENT_FLAG_ENABLED) - size += sprintf(buf + size, " enable"); + size += sprintf(buf + size, " enabled"); + else if (status & ACPI_EVENT_FLAG_WAKE_ENABLED) + size += sprintf(buf + size, " wake_enabled"); else - size += sprintf(buf + size, " disable"); + size += sprintf(buf + size, " disabled"); end: size += sprintf(buf + size, "\n"); @@ -385,7 +389,7 @@ static ssize_t counter_set(struct kobject *kobj, if (result) goto end; - if (!(all_counters[index].flags & ACPI_EVENT_VALID)) { + if (!(status & ACPI_EVENT_FLAG_HANDLE)) { printk(KERN_WARNING PREFIX "Can not change Invalid GPE/Fixed Event status\n"); return -EINVAL; @@ -394,10 +398,10 @@ static ssize_t counter_set(struct kobject *kobj, if (index < num_gpes) { if (!strcmp(buf, "disable\n") && (status & ACPI_EVENT_FLAG_ENABLED)) - result = acpi_disable_gpe(handle, index, ACPI_NOT_ISR); + result = acpi_disable_gpe(handle, index); else if (!strcmp(buf, "enable\n") && !(status & ACPI_EVENT_FLAG_ENABLED)) - result = acpi_enable_gpe(handle, index, ACPI_NOT_ISR); + result = acpi_enable_gpe(handle, index); else if (!strcmp(buf, "clear\n") && (status & ACPI_EVENT_FLAG_SET)) result = acpi_clear_gpe(handle, index, ACPI_NOT_ISR); diff --git a/drivers/acpi/tables/tbfadt.c b/drivers/acpi/tables/tbfadt.c index 2c7885e7ffb..2817158fb6a 100644 --- a/drivers/acpi/tables/tbfadt.c +++ b/drivers/acpi/tables/tbfadt.c @@ -304,7 +304,7 @@ static void acpi_tb_convert_fadt(void) * The ACPI 1.0 reserved fields that will be zeroed are the bytes located at * offset 45, 55, 95, and the word located at offset 109, 110. */ - if (acpi_gbl_FADT.header.revision < 3) { + if (acpi_gbl_FADT.header.revision < FADT2_REVISION_ID) { acpi_gbl_FADT.preferred_profile = 0; acpi_gbl_FADT.pstate_control = 0; acpi_gbl_FADT.cst_control = 0; diff --git a/drivers/acpi/thermal.c b/drivers/acpi/thermal.c index ad6cae938f0..073ff09218a 100644 --- a/drivers/acpi/thermal.c +++ b/drivers/acpi/thermal.c @@ -47,7 +47,6 @@ #include <acpi/acpi_bus.h> #include <acpi/acpi_drivers.h> -#define ACPI_THERMAL_COMPONENT 0x04000000 #define ACPI_THERMAL_CLASS "thermal_zone" #define ACPI_THERMAL_DEVICE_NAME "Thermal Zone" #define ACPI_THERMAL_FILE_STATE "state" @@ -576,7 +575,7 @@ static int acpi_thermal_critical(struct acpi_thermal *tz) acpi_bus_generate_proc_event(tz->device, ACPI_THERMAL_NOTIFY_CRITICAL, tz->trips.critical.flags.enabled); acpi_bus_generate_netlink_event(tz->device->pnp.device_class, - tz->device->dev.bus_id, + dev_name(&tz->device->dev), ACPI_THERMAL_NOTIFY_CRITICAL, tz->trips.critical.flags.enabled); @@ -605,7 +604,7 @@ static int acpi_thermal_hot(struct acpi_thermal *tz) acpi_bus_generate_proc_event(tz->device, ACPI_THERMAL_NOTIFY_HOT, tz->trips.hot.flags.enabled); acpi_bus_generate_netlink_event(tz->device->pnp.device_class, - tz->device->dev.bus_id, + dev_name(&tz->device->dev), ACPI_THERMAL_NOTIFY_HOT, tz->trips.hot.flags.enabled); @@ -1592,14 +1591,14 @@ static void acpi_thermal_notify(acpi_handle handle, u32 event, void *data) acpi_thermal_check(tz); acpi_bus_generate_proc_event(device, event, 0); acpi_bus_generate_netlink_event(device->pnp.device_class, - device->dev.bus_id, event, 0); + dev_name(&device->dev), event, 0); break; case ACPI_THERMAL_NOTIFY_DEVICES: acpi_thermal_trips_update(tz, ACPI_TRIPS_REFRESH_DEVICES); acpi_thermal_check(tz); acpi_bus_generate_proc_event(device, event, 0); acpi_bus_generate_netlink_event(device->pnp.device_class, - device->dev.bus_id, event, 0); + dev_name(&device->dev), event, 0); break; default: ACPI_DEBUG_PRINT((ACPI_DB_INFO, diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c index a29b0ccac65..baa44192972 100644 --- a/drivers/acpi/video.c +++ b/drivers/acpi/video.c @@ -41,7 +41,6 @@ #include <acpi/acpi_bus.h> #include <acpi/acpi_drivers.h> -#define ACPI_VIDEO_COMPONENT 0x08000000 #define ACPI_VIDEO_CLASS "video" #define ACPI_VIDEO_BUS_NAME "Video Bus" #define ACPI_VIDEO_DEVICE_NAME "Video Device" @@ -739,7 +738,8 @@ static void acpi_video_device_find_cap(struct acpi_video_device *device) device->cap._DSS = 1; } - max_level = acpi_video_init_brightness(device); + if (acpi_video_backlight_support()) + max_level = acpi_video_init_brightness(device); if (device->cap._BCL && device->cap._BCM && max_level > 0) { int result; @@ -785,18 +785,21 @@ static void acpi_video_device_find_cap(struct acpi_video_device *device) printk(KERN_ERR PREFIX "Create sysfs link\n"); } - if (device->cap._DCS && device->cap._DSS){ - static int count = 0; - char *name; - name = kzalloc(MAX_NAME_LEN, GFP_KERNEL); - if (!name) - return; - sprintf(name, "acpi_video%d", count++); - device->output_dev = video_output_register(name, - NULL, device, &acpi_output_properties); - kfree(name); + + if (acpi_video_display_switch_support()) { + + if (device->cap._DCS && device->cap._DSS) { + static int count; + char *name; + name = kzalloc(MAX_NAME_LEN, GFP_KERNEL); + if (!name) + return; + sprintf(name, "acpi_video%d", count++); + device->output_dev = video_output_register(name, + NULL, device, &acpi_output_properties); + kfree(name); + } } - return; } /* @@ -842,11 +845,16 @@ static void acpi_video_bus_find_cap(struct acpi_video_bus *video) static int acpi_video_bus_check(struct acpi_video_bus *video) { acpi_status status = -ENOENT; - + struct device *dev; if (!video) return -EINVAL; + dev = acpi_get_physical_pci_device(video->device->handle); + if (!dev) + return -ENODEV; + put_device(dev); + /* Since there is no HID, CID and so on for VGA driver, we have * to check well known required nodes. */ @@ -2094,12 +2102,6 @@ static int __init acpi_video_init(void) { int result = 0; - - /* - acpi_dbg_level = 0xFFFFFFFF; - acpi_dbg_layer = 0x08000000; - */ - acpi_video_dir = proc_mkdir(ACPI_VIDEO_CLASS, acpi_root_dir); if (!acpi_video_dir) return -ENODEV; diff --git a/drivers/acpi/video_detect.c b/drivers/acpi/video_detect.c new file mode 100644 index 00000000000..f022eb6f563 --- /dev/null +++ b/drivers/acpi/video_detect.c @@ -0,0 +1,267 @@ +/* + * Copyright (C) 2008 SuSE Linux Products GmbH + * Thomas Renninger <trenn@suse.de> + * + * May be copied or modified under the terms of the GNU General Public License + * + * video_detect.c: + * Provides acpi_is_video_device() for early scanning of ACPI devices in scan.c + * There a Linux specific (Spec does not provide a HID for video devices) is + * assinged + * + * After PCI devices are glued with ACPI devices + * acpi_get_physical_pci_device() can be called to identify ACPI graphics + * devices for which a real graphics card is plugged in + * + * Now acpi_video_get_capabilities() can be called to check which + * capabilities the graphics cards plugged in support. The check for general + * video capabilities will be triggered by the first caller of + * acpi_video_get_capabilities(NULL); which will happen when the first + * backlight (or display output) switching supporting driver calls: + * acpi_video_backlight_support(); + * + * Depending on whether ACPI graphics extensions (cmp. ACPI spec Appendix B) + * are available, video.ko should be used to handle the device. + * + * Otherwise vendor specific drivers like thinkpad_acpi, asus_acpi, + * sony_acpi,... can take care about backlight brightness and display output + * switching. + * + * If CONFIG_ACPI_VIDEO is neither set as "compiled in" (y) nor as a module (m) + * this file will not be compiled, acpi_video_get_capabilities() and + * acpi_video_backlight_support() will always return 0 and vendor specific + * drivers always can handle backlight. + * + */ + +#include <linux/acpi.h> +#include <linux/dmi.h> + +ACPI_MODULE_NAME("video"); +#define _COMPONENT ACPI_VIDEO_COMPONENT + +static long acpi_video_support; +static bool acpi_video_caps_checked; + +static acpi_status +acpi_backlight_cap_match(acpi_handle handle, u32 level, void *context, + void **retyurn_value) +{ + long *cap = context; + acpi_handle h_dummy; + + if (ACPI_SUCCESS(acpi_get_handle(handle, "_BCM", &h_dummy)) && + ACPI_SUCCESS(acpi_get_handle(handle, "_BCL", &h_dummy))) { + ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found generic backlight " + "support\n")); + *cap |= ACPI_VIDEO_BACKLIGHT; + /* We have backlight support, no need to scan further */ + return AE_CTRL_TERMINATE; + } + return 0; +} + +/* Returns true if the device is a video device which can be handled by + * video.ko. + * The device will get a Linux specific CID added in scan.c to + * identify the device as an ACPI graphics device + * Be aware that the graphics device may not be physically present + * Use acpi_video_get_capabilities() to detect general ACPI video + * capabilities of present cards + */ +long acpi_is_video_device(struct acpi_device *device) +{ + acpi_handle h_dummy; + long video_caps = 0; + + if (!device) + return 0; + + /* Does this device able to support video switching ? */ + if (ACPI_SUCCESS(acpi_get_handle(device->handle, "_DOD", &h_dummy)) && + ACPI_SUCCESS(acpi_get_handle(device->handle, "_DOS", &h_dummy))) + video_caps |= ACPI_VIDEO_OUTPUT_SWITCHING; + + /* Does this device able to retrieve a video ROM ? */ + if (ACPI_SUCCESS(acpi_get_handle(device->handle, "_ROM", &h_dummy))) + video_caps |= ACPI_VIDEO_ROM_AVAILABLE; + + /* Does this device able to configure which video head to be POSTed ? */ + if (ACPI_SUCCESS(acpi_get_handle(device->handle, "_VPO", &h_dummy)) && + ACPI_SUCCESS(acpi_get_handle(device->handle, "_GPD", &h_dummy)) && + ACPI_SUCCESS(acpi_get_handle(device->handle, "_SPD", &h_dummy))) + video_caps |= ACPI_VIDEO_DEVICE_POSTING; + + /* Only check for backlight functionality if one of the above hit. */ + if (video_caps) + acpi_walk_namespace(ACPI_TYPE_DEVICE, device->handle, + ACPI_UINT32_MAX, acpi_backlight_cap_match, + &video_caps, NULL); + + return video_caps; +} +EXPORT_SYMBOL(acpi_is_video_device); + +static acpi_status +find_video(acpi_handle handle, u32 lvl, void *context, void **rv) +{ + long *cap = context; + struct device *dev; + struct acpi_device *acpi_dev; + + const struct acpi_device_id video_ids[] = { + {ACPI_VIDEO_HID, 0}, + {"", 0}, + }; + if (acpi_bus_get_device(handle, &acpi_dev)) + return AE_OK; + + if (!acpi_match_device_ids(acpi_dev, video_ids)) { + dev = acpi_get_physical_pci_device(handle); + if (!dev) + return AE_OK; + put_device(dev); + *cap |= acpi_is_video_device(acpi_dev); + } + return AE_OK; +} + +/* + * Returns the video capabilities of a specific ACPI graphics device + * + * if NULL is passed as argument all ACPI devices are enumerated and + * all graphics capabilities of physically present devices are + * summerized and returned. This is cached and done only once. + */ +long acpi_video_get_capabilities(acpi_handle graphics_handle) +{ + long caps = 0; + struct acpi_device *tmp_dev; + acpi_status status; + + if (acpi_video_caps_checked && graphics_handle == NULL) + return acpi_video_support; + + if (!graphics_handle) { + /* Only do the global walk through all graphics devices once */ + acpi_walk_namespace(ACPI_TYPE_DEVICE, ACPI_ROOT_OBJECT, + ACPI_UINT32_MAX, find_video, + &caps, NULL); + /* There might be boot param flags set already... */ + acpi_video_support |= caps; + acpi_video_caps_checked = 1; + /* Add blacklists here. Be careful to use the right *DMI* bits + * to still be able to override logic via boot params, e.g.: + * + * if (dmi_name_in_vendors("XY")) { + * acpi_video_support |= + * ACPI_VIDEO_OUTPUT_SWITCHING_DMI_VENDOR; + * acpi_video_support |= + * ACPI_VIDEO_BACKLIGHT_DMI_VENDOR; + *} + */ + } else { + status = acpi_bus_get_device(graphics_handle, &tmp_dev); + if (ACPI_FAILURE(status)) { + ACPI_EXCEPTION((AE_INFO, status, "Invalid device")); + return 0; + } + acpi_walk_namespace(ACPI_TYPE_DEVICE, graphics_handle, + ACPI_UINT32_MAX, find_video, + &caps, NULL); + } + ACPI_DEBUG_PRINT((ACPI_DB_INFO, "We have 0x%lX video support %s %s\n", + graphics_handle ? caps : acpi_video_support, + graphics_handle ? "on device " : "in general", + graphics_handle ? acpi_device_bid(tmp_dev) : "")); + return caps; +} +EXPORT_SYMBOL(acpi_video_get_capabilities); + +/* Returns true if video.ko can do backlight switching */ +int acpi_video_backlight_support(void) +{ + /* + * We must check whether the ACPI graphics device is physically plugged + * in. Therefore this must be called after binding PCI and ACPI devices + */ + if (!acpi_video_caps_checked) + acpi_video_get_capabilities(NULL); + + /* First check for boot param -> highest prio */ + if (acpi_video_support & ACPI_VIDEO_BACKLIGHT_FORCE_VENDOR) + return 0; + else if (acpi_video_support & ACPI_VIDEO_BACKLIGHT_FORCE_VIDEO) + return 1; + + /* Then check for DMI blacklist -> second highest prio */ + if (acpi_video_support & ACPI_VIDEO_BACKLIGHT_DMI_VENDOR) + return 0; + else if (acpi_video_support & ACPI_VIDEO_BACKLIGHT_DMI_VIDEO) + return 1; + + /* Then go the default way */ + return acpi_video_support & ACPI_VIDEO_BACKLIGHT; +} +EXPORT_SYMBOL(acpi_video_backlight_support); + +/* + * Returns true if video.ko can do display output switching. + * This does not work well/at all with binary graphics drivers + * which disable system io ranges and do it on their own. + */ +int acpi_video_display_switch_support(void) +{ + if (!acpi_video_caps_checked) + acpi_video_get_capabilities(NULL); + + if (acpi_video_support & ACPI_VIDEO_OUTPUT_SWITCHING_FORCE_VENDOR) + return 0; + else if (acpi_video_support & ACPI_VIDEO_OUTPUT_SWITCHING_FORCE_VIDEO) + return 1; + + if (acpi_video_support & ACPI_VIDEO_OUTPUT_SWITCHING_DMI_VENDOR) + return 0; + else if (acpi_video_support & ACPI_VIDEO_OUTPUT_SWITCHING_DMI_VIDEO) + return 1; + + return acpi_video_support & ACPI_VIDEO_OUTPUT_SWITCHING; +} +EXPORT_SYMBOL(acpi_video_display_switch_support); + +/* + * Use acpi_display_output=vendor/video or acpi_backlight=vendor/video + * To force that backlight or display output switching is processed by vendor + * specific acpi drivers or video.ko driver. + */ +int __init acpi_backlight(char *str) +{ + if (str == NULL || *str == '\0') + return 1; + else { + if (!strcmp("vendor", str)) + acpi_video_support |= + ACPI_VIDEO_BACKLIGHT_FORCE_VENDOR; + if (!strcmp("video", str)) + acpi_video_support |= + ACPI_VIDEO_OUTPUT_SWITCHING_FORCE_VIDEO; + } + return 1; +} +__setup("acpi_backlight=", acpi_backlight); + +int __init acpi_display_output(char *str) +{ + if (str == NULL || *str == '\0') + return 1; + else { + if (!strcmp("vendor", str)) + acpi_video_support |= + ACPI_VIDEO_OUTPUT_SWITCHING_FORCE_VENDOR; + if (!strcmp("video", str)) + acpi_video_support |= + ACPI_VIDEO_OUTPUT_SWITCHING_FORCE_VIDEO; + } + return 1; +} +__setup("acpi_display_output=", acpi_display_output); diff --git a/drivers/acpi/wmi.c b/drivers/acpi/wmi.c index 47cd7baf9b1..8a8b377712c 100644 --- a/drivers/acpi/wmi.c +++ b/drivers/acpi/wmi.c @@ -660,7 +660,7 @@ static void acpi_wmi_notify(acpi_handle handle, u32 event, void *data) wblock->handler(event, wblock->handler_data); acpi_bus_generate_netlink_event( - device->pnp.device_class, device->dev.bus_id, + device->pnp.device_class, dev_name(&device->dev), event, 0); break; } diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c index 4b473948632..9033d164c4e 100644 --- a/drivers/ata/libata-sff.c +++ b/drivers/ata/libata-sff.c @@ -1227,10 +1227,19 @@ fsm_start: /* ATA PIO protocol */ if (unlikely((status & ATA_DRQ) == 0)) { /* handle BSY=0, DRQ=0 as error */ - if (likely(status & (ATA_ERR | ATA_DF))) + if (likely(status & (ATA_ERR | ATA_DF))) { /* device stops HSM for abort/error */ qc->err_mask |= AC_ERR_DEV; - else { + + /* If diagnostic failed and this is + * IDENTIFY, it's likely a phantom + * device. Mark hint. + */ + if (qc->dev->horkage & + ATA_HORKAGE_DIAGNOSTIC) + qc->err_mask |= + AC_ERR_NODEV_HINT; + } else { /* HSM violation. Let EH handle this. * Phantom devices also trigger this * condition. Mark hint. diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig index 61ad8d639ba..0344a8a8321 100644 --- a/drivers/block/Kconfig +++ b/drivers/block/Kconfig @@ -21,7 +21,8 @@ config BLK_DEV_FD ---help--- If you want to use the floppy disk drive(s) of your PC under Linux, say Y. Information about this driver, especially important for IBM - Thinkpad users, is contained in <file:Documentation/floppy.txt>. + Thinkpad users, is contained in + <file:Documentation/blockdev/floppy.txt>. That file also contains the location of the Floppy driver FAQ as well as location of the fdutils package used to configure additional parameters of the driver at run time. @@ -76,7 +77,7 @@ config PARIDE your computer's parallel port. Most of them are actually IDE devices using a parallel port IDE adapter. This option enables the PARIDE subsystem which contains drivers for many of these external drives. - Read <file:Documentation/paride.txt> for more information. + Read <file:Documentation/blockdev/paride.txt> for more information. If you have said Y to the "Parallel-port support" configuration option, you may share a single port between your printer and other @@ -114,9 +115,9 @@ config BLK_CPQ_DA help This is the driver for Compaq Smart Array controllers. Everyone using these boards should say Y here. See the file - <file:Documentation/cpqarray.txt> for the current list of boards - supported by this driver, and for further information on the use of - this driver. + <file:Documentation/blockdev/cpqarray.txt> for the current list of + boards supported by this driver, and for further information on the + use of this driver. config BLK_CPQ_CISS_DA tristate "Compaq Smart Array 5xxx support" @@ -124,7 +125,7 @@ config BLK_CPQ_CISS_DA help This is the driver for Compaq Smart Array 5xxx controllers. Everyone using these boards should say Y here. - See <file:Documentation/cciss.txt> for the current list of + See <file:Documentation/blockdev/cciss.txt> for the current list of boards supported by this driver, and for further information on the use of this driver. @@ -135,7 +136,7 @@ config CISS_SCSI_TAPE help When enabled (Y), this option allows SCSI tape drives and SCSI medium changers (tape robots) to be accessed via a Compaq 5xxx array - controller. (See <file:Documentation/cciss.txt> for more details.) + controller. (See <file:Documentation/blockdev/cciss.txt> for more details.) "SCSI support" and "SCSI tape support" must also be enabled for this option to work. @@ -149,8 +150,8 @@ config BLK_DEV_DAC960 help This driver adds support for the Mylex DAC960, AcceleRAID, and eXtremeRAID PCI RAID controllers. See the file - <file:Documentation/README.DAC960> for further information about - this driver. + <file:Documentation/blockdev/README.DAC960> for further information + about this driver. To compile this driver as a module, choose M here: the module will be called DAC960. @@ -278,9 +279,9 @@ config BLK_DEV_NBD userland (making server and client physically the same computer, communicating using the loopback network device). - Read <file:Documentation/nbd.txt> for more information, especially - about where to find the server code, which runs in user space and - does not need special kernel support. + Read <file:Documentation/blockdev/nbd.txt> for more information, + especially about where to find the server code, which runs in user + space and does not need special kernel support. Note that this has nothing to do with the network file systems NFS or Coda; you can say N here even if you intend to use NFS or Coda. @@ -321,8 +322,8 @@ config BLK_DEV_RAM store a copy of a minimal root file system off of a floppy into RAM during the initial install of Linux. - Note that the kernel command line option "ramdisk=XX" is now - obsolete. For details, read <file:Documentation/ramdisk.txt>. + Note that the kernel command line option "ramdisk=XX" is now obsolete. + For details, read <file:Documentation/blockdev/ramdisk.txt>. To compile this driver as a module, choose M here: the module will be called rd. diff --git a/drivers/block/floppy.c b/drivers/block/floppy.c index 14db747a636..cf29cc4e6ab 100644 --- a/drivers/block/floppy.c +++ b/drivers/block/floppy.c @@ -4124,7 +4124,7 @@ static int __init floppy_setup(char *str) printk("\n"); } else DPRINT("botched floppy option\n"); - DPRINT("Read Documentation/floppy.txt\n"); + DPRINT("Read Documentation/blockdev/floppy.txt\n"); return 0; } diff --git a/drivers/block/ub.c b/drivers/block/ub.c index fccac18d311..048d71d244d 100644 --- a/drivers/block/ub.c +++ b/drivers/block/ub.c @@ -1546,8 +1546,6 @@ static void ub_top_sense_done(struct ub_dev *sc, struct ub_scsi_cmd *scmd) /* * Reset management - * XXX Move usb_reset_device to khubd. Hogging kevent is not a good thing. - * XXX Make usb_sync_reset asynchronous. */ static void ub_reset_enter(struct ub_dev *sc, int try) @@ -1633,6 +1631,22 @@ static void ub_reset_task(struct work_struct *work) } /* + * XXX Reset brackets are too much hassle to implement, so just stub them + * in order to prevent forced unbinding (which deadlocks solid when our + * ->disconnect method waits for the reset to complete and this kills keventd). + * + * XXX Tell Alan to move usb_unlock_device inside of usb_reset_device, + * or else the post_reset is invoked, and restats I/O on a locked device. + */ +static int ub_pre_reset(struct usb_interface *iface) { + return 0; +} + +static int ub_post_reset(struct usb_interface *iface) { + return 0; +} + +/* * This is called from a process context. */ static void ub_revalidate(struct ub_dev *sc, struct ub_lun *lun) @@ -2446,6 +2460,8 @@ static struct usb_driver ub_driver = { .probe = ub_probe, .disconnect = ub_disconnect, .id_table = ub_usb_ids, + .pre_reset = ub_pre_reset, + .post_reset = ub_post_reset, }; static int __init ub_init(void) diff --git a/drivers/block/xen-blkfront.c b/drivers/block/xen-blkfront.c index b220c686089..2d19f0cc47f 100644 --- a/drivers/block/xen-blkfront.c +++ b/drivers/block/xen-blkfront.c @@ -338,12 +338,18 @@ wait: static int xlvbd_init_blk_queue(struct gendisk *gd, u16 sector_size) { struct request_queue *rq; + elevator_t *old_e; rq = blk_init_queue(do_blkif_request, &blkif_io_lock); if (rq == NULL) return -1; - elevator_init(rq, "noop"); + old_e = rq->elevator; + if (IS_ERR_VALUE(elevator_init(rq, "noop"))) + printk(KERN_WARNING + "blkfront: Switch elevator failed, use default\n"); + else + elevator_exit(old_e); /* Hard sector size and max sectors impersonate the equiv. hardware. */ blk_queue_hardsect_size(rq, sector_size); diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig index 19e255c49f1..f57907a2c7a 100644 --- a/drivers/char/Kconfig +++ b/drivers/char/Kconfig @@ -124,7 +124,7 @@ config COMPUTONE which give you many serial ports. You would need something like this to connect more than two modems to your Linux box, for instance in order to become a dial-in server. If you have a card like that, say - Y here and read <file:Documentation/computone.txt>. + Y here and read <file:Documentation/serial/computone.txt>. To compile this driver as module, choose M here: the module will be called ip2. @@ -136,7 +136,7 @@ config ROCKETPORT This driver supports Comtrol RocketPort and RocketModem PCI boards. These boards provide 2, 4, 8, 16, or 32 high-speed serial ports or modems. For information about the RocketPort/RocketModem boards - and this driver read <file:Documentation/rocket.txt>. + and this driver read <file:Documentation/serial/rocket.txt>. To compile this driver as a module, choose M here: the module will be called rocket. @@ -154,7 +154,7 @@ config CYCLADES your Linux box, for instance in order to become a dial-in server. For information about the Cyclades-Z card, read - <file:Documentation/README.cycladesZ>. + <file:Documentation/serial/README.cycladesZ>. To compile this driver as a module, choose M here: the module will be called cyclades. @@ -183,7 +183,7 @@ config DIGIEPCA box, for instance in order to become a dial-in server. This driver supports the original PC (ISA) boards as well as PCI, and EISA. If you have a card like this, say Y here and read the file - <file:Documentation/digiepca.txt>. + <file:Documentation/serial/digiepca.txt>. To compile this driver as a module, choose M here: the module will be called epca. @@ -289,7 +289,7 @@ config RISCOM8 which gives you many serial ports. You would need something like this to connect more than two modems to your Linux box, for instance in order to become a dial-in server. If you have a card like that, - say Y here and read the file <file:Documentation/riscom8.txt>. + say Y here and read the file <file:Documentation/serial/riscom8.txt>. Also it's possible to say M here and compile this driver as kernel loadable module; the module will be called riscom8. @@ -304,8 +304,8 @@ config SPECIALIX your Linux box, for instance in order to become a dial-in server. If you have a card like that, say Y here and read the file - <file:Documentation/specialix.txt>. Also it's possible to say M here - and compile this driver as kernel loadable module which will be + <file:Documentation/serial/specialix.txt>. Also it's possible to say + M here and compile this driver as kernel loadable module which will be called specialix. config SX @@ -313,7 +313,7 @@ config SX depends on SERIAL_NONSTANDARD && (PCI || EISA || ISA) help This is a driver for the SX and SI multiport serial cards. - Please read the file <file:Documentation/sx.txt> for details. + Please read the file <file:Documentation/serial/sx.txt> for details. This driver can only be built as a module ( = code which can be inserted in and removed from the running kernel whenever you want). @@ -344,8 +344,8 @@ config STALDRV like this to connect more than two modems to your Linux box, for instance in order to become a dial-in server. If you say Y here, you will be asked for your specific card model in the next - questions. Make sure to read <file:Documentation/stallion.txt> in - this case. If you have never heard about all this, it's safe to + questions. Make sure to read <file:Documentation/serial/stallion.txt> + in this case. If you have never heard about all this, it's safe to say N. config STALLION @@ -354,7 +354,7 @@ config STALLION help If you have an EasyIO or EasyConnection 8/32 multiport Stallion card, then this is for you; say Y. Make sure to read - <file:Documentation/stallion.txt>. + <file:Documentation/serial/stallion.txt>. To compile this driver as a module, choose M here: the module will be called stallion. @@ -365,7 +365,7 @@ config ISTALLION help If you have an EasyConnection 8/64, ONboard, Brumby or Stallion serial multiport card, say Y here. Make sure to read - <file:Documentation/stallion.txt>. + <file:Documentation/serial/stallion.txt>. To compile this driver as a module, choose M here: the module will be called istallion. diff --git a/drivers/char/ipmi/ipmi_msghandler.c b/drivers/char/ipmi/ipmi_msghandler.c index 8a59aaa21be..7a88dfd4427 100644 --- a/drivers/char/ipmi/ipmi_msghandler.c +++ b/drivers/char/ipmi/ipmi_msghandler.c @@ -422,9 +422,11 @@ struct ipmi_smi { /** * The driver model view of the IPMI messaging driver. */ -static struct device_driver ipmidriver = { - .name = "ipmi", - .bus = &platform_bus_type +static struct platform_driver ipmidriver = { + .driver = { + .name = "ipmi", + .bus = &platform_bus_type + } }; static DEFINE_MUTEX(ipmidriver_mutex); @@ -2384,9 +2386,9 @@ static int ipmi_bmc_register(ipmi_smi_t intf, int ifnum, * representing the interfaced BMC already */ if (bmc->guid_set) - old_bmc = ipmi_find_bmc_guid(&ipmidriver, bmc->guid); + old_bmc = ipmi_find_bmc_guid(&ipmidriver.driver, bmc->guid); else - old_bmc = ipmi_find_bmc_prod_dev_id(&ipmidriver, + old_bmc = ipmi_find_bmc_prod_dev_id(&ipmidriver.driver, bmc->id.product_id, bmc->id.device_id); @@ -2416,7 +2418,7 @@ static int ipmi_bmc_register(ipmi_smi_t intf, int ifnum, snprintf(name, sizeof(name), "ipmi_bmc.%4.4x", bmc->id.product_id); - while (ipmi_find_bmc_prod_dev_id(&ipmidriver, + while (ipmi_find_bmc_prod_dev_id(&ipmidriver.driver, bmc->id.product_id, bmc->id.device_id)) { if (!warn_printed) { @@ -2446,7 +2448,7 @@ static int ipmi_bmc_register(ipmi_smi_t intf, int ifnum, " Unable to allocate platform device\n"); return -ENOMEM; } - bmc->dev->dev.driver = &ipmidriver; + bmc->dev->dev.driver = &ipmidriver.driver; dev_set_drvdata(&bmc->dev->dev, bmc); kref_init(&bmc->refcount); @@ -4247,7 +4249,7 @@ static int ipmi_init_msghandler(void) if (initialized) return 0; - rv = driver_register(&ipmidriver); + rv = driver_register(&ipmidriver.driver); if (rv) { printk(KERN_ERR PFX "Could not register IPMI driver\n"); return rv; @@ -4308,7 +4310,7 @@ static __exit void cleanup_ipmi(void) remove_proc_entry(proc_ipmi_root->name, NULL); #endif /* CONFIG_PROC_FS */ - driver_unregister(&ipmidriver); + driver_unregister(&ipmidriver.driver); initialized = 0; diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c index 3123bf57ad9..3000135f2ea 100644 --- a/drivers/char/ipmi/ipmi_si_intf.c +++ b/drivers/char/ipmi/ipmi_si_intf.c @@ -114,9 +114,11 @@ static char *si_to_str[] = { "kcs", "smic", "bt" }; #define DEVICE_NAME "ipmi_si" -static struct device_driver ipmi_driver = { - .name = DEVICE_NAME, - .bus = &platform_bus_type +static struct platform_driver ipmi_driver = { + .driver = { + .name = DEVICE_NAME, + .bus = &platform_bus_type + } }; @@ -2868,7 +2870,7 @@ static int try_smi_init(struct smi_info *new_smi) goto out_err; } new_smi->dev = &new_smi->pdev->dev; - new_smi->dev->driver = &ipmi_driver; + new_smi->dev->driver = &ipmi_driver.driver; rv = platform_device_add(new_smi->pdev); if (rv) { @@ -2983,7 +2985,7 @@ static __devinit int init_ipmi_si(void) initialized = 1; /* Register the device drivers. */ - rv = driver_register(&ipmi_driver); + rv = driver_register(&ipmi_driver.driver); if (rv) { printk(KERN_ERR "init_ipmi_si: Unable to register driver: %d\n", @@ -3052,7 +3054,7 @@ static __devinit int init_ipmi_si(void) #ifdef CONFIG_PPC_OF of_unregister_platform_driver(&ipmi_of_platform_driver); #endif - driver_unregister(&ipmi_driver); + driver_unregister(&ipmi_driver.driver); printk(KERN_WARNING "ipmi_si: Unable to find any System Interface(s)\n"); return -ENODEV; @@ -3151,7 +3153,7 @@ static __exit void cleanup_ipmi_si(void) cleanup_one_si(e); mutex_unlock(&smi_infos_lock); - driver_unregister(&ipmi_driver); + driver_unregister(&ipmi_driver.driver); } module_exit(cleanup_ipmi_si); diff --git a/drivers/char/sonypi.c b/drivers/char/sonypi.c index 2457b07dabd..f4374437a03 100644 --- a/drivers/char/sonypi.c +++ b/drivers/char/sonypi.c @@ -523,7 +523,7 @@ static int acpi_driver_registered; static int sonypi_ec_write(u8 addr, u8 value) { -#ifdef CONFIG_ACPI_EC +#ifdef CONFIG_ACPI if (SONYPI_ACPI_ACTIVE) return ec_write(addr, value); #endif @@ -539,7 +539,7 @@ static int sonypi_ec_write(u8 addr, u8 value) static int sonypi_ec_read(u8 addr, u8 *value) { -#ifdef CONFIG_ACPI_EC +#ifdef CONFIG_ACPI if (SONYPI_ACPI_ACTIVE) return ec_read(addr, value); #endif diff --git a/drivers/char/specialix.c b/drivers/char/specialix.c index 242fd46fda2..a16b94f12eb 100644 --- a/drivers/char/specialix.c +++ b/drivers/char/specialix.c @@ -72,7 +72,7 @@ /* * There is a bunch of documentation about the card, jumpers, config * settings, restrictions, cables, device names and numbers in - * Documentation/specialix.txt + * Documentation/serial/specialix.txt */ #include <linux/module.h> diff --git a/drivers/dma/dmaengine.c b/drivers/dma/dmaengine.c index dc003a3a787..5317e08221e 100644 --- a/drivers/dma/dmaengine.c +++ b/drivers/dma/dmaengine.c @@ -399,8 +399,8 @@ int dma_async_device_register(struct dma_device *device) chan->chan_id = chancnt++; chan->dev.class = &dma_devclass; chan->dev.parent = device->dev; - snprintf(chan->dev.bus_id, BUS_ID_SIZE, "dma%dchan%d", - device->dev_id, chan->chan_id); + dev_set_name(&chan->dev, "dma%dchan%d", + device->dev_id, chan->chan_id); rc = device_register(&chan->dev); if (rc) { diff --git a/drivers/dma/dmatest.c b/drivers/dma/dmatest.c index d1e381e35a9..ed9636bfb54 100644 --- a/drivers/dma/dmatest.c +++ b/drivers/dma/dmatest.c @@ -20,11 +20,11 @@ static unsigned int test_buf_size = 16384; module_param(test_buf_size, uint, S_IRUGO); MODULE_PARM_DESC(test_buf_size, "Size of the memcpy test buffer"); -static char test_channel[BUS_ID_SIZE]; +static char test_channel[20]; module_param_string(channel, test_channel, sizeof(test_channel), S_IRUGO); MODULE_PARM_DESC(channel, "Bus ID of the channel to test (default: any)"); -static char test_device[BUS_ID_SIZE]; +static char test_device[20]; module_param_string(device, test_device, sizeof(test_device), S_IRUGO); MODULE_PARM_DESC(device, "Bus ID of the DMA Engine to test (default: any)"); @@ -80,14 +80,14 @@ static bool dmatest_match_channel(struct dma_chan *chan) { if (test_channel[0] == '\0') return true; - return strcmp(chan->dev.bus_id, test_channel) == 0; + return strcmp(dev_name(&chan->dev), test_channel) == 0; } static bool dmatest_match_device(struct dma_device *device) { if (test_device[0] == '\0') return true; - return strcmp(device->dev->bus_id, test_device) == 0; + return strcmp(dev_name(device->dev), test_device) == 0; } static unsigned long dmatest_random(void) @@ -332,7 +332,7 @@ static enum dma_state_client dmatest_add_channel(struct dma_chan *chan) dtc = kmalloc(sizeof(struct dmatest_chan), GFP_KERNEL); if (!dtc) { - pr_warning("dmatest: No memory for %s\n", chan->dev.bus_id); + pr_warning("dmatest: No memory for %s\n", dev_name(&chan->dev)); return DMA_NAK; } @@ -343,16 +343,16 @@ static enum dma_state_client dmatest_add_channel(struct dma_chan *chan) thread = kzalloc(sizeof(struct dmatest_thread), GFP_KERNEL); if (!thread) { pr_warning("dmatest: No memory for %s-test%u\n", - chan->dev.bus_id, i); + dev_name(&chan->dev), i); break; } thread->chan = dtc->chan; smp_wmb(); thread->task = kthread_run(dmatest_func, thread, "%s-test%u", - chan->dev.bus_id, i); + dev_name(&chan->dev), i); if (IS_ERR(thread->task)) { pr_warning("dmatest: Failed to run thread %s-test%u\n", - chan->dev.bus_id, i); + dev_name(&chan->dev), i); kfree(thread); break; } @@ -362,7 +362,7 @@ static enum dma_state_client dmatest_add_channel(struct dma_chan *chan) list_add_tail(&thread->node, &dtc->threads); } - pr_info("dmatest: Started %u threads using %s\n", i, chan->dev.bus_id); + pr_info("dmatest: Started %u threads using %s\n", i, dev_name(&chan->dev)); list_add_tail(&dtc->node, &dmatest_channels); nr_channels++; @@ -379,7 +379,7 @@ static enum dma_state_client dmatest_remove_channel(struct dma_chan *chan) list_del(&dtc->node); dmatest_cleanup_channel(dtc); pr_debug("dmatest: lost channel %s\n", - chan->dev.bus_id); + dev_name(&chan->dev)); return DMA_ACK; } } @@ -418,7 +418,7 @@ dmatest_event(struct dma_client *client, struct dma_chan *chan, default: pr_info("dmatest: Unhandled event %u (%s)\n", - state, chan->dev.bus_id); + state, dev_name(&chan->dev)); break; } diff --git a/drivers/dma/iop-adma.c b/drivers/dma/iop-adma.c index 71fba82462c..c7a9306d951 100644 --- a/drivers/dma/iop-adma.c +++ b/drivers/dma/iop-adma.c @@ -411,6 +411,7 @@ iop_adma_tx_submit(struct dma_async_tx_descriptor *tx) int slot_cnt; int slots_per_op; dma_cookie_t cookie; + dma_addr_t next_dma; grp_start = sw_desc->group_head; slot_cnt = grp_start->slot_cnt; @@ -425,12 +426,12 @@ iop_adma_tx_submit(struct dma_async_tx_descriptor *tx) &old_chain_tail->chain_node); /* fix up the hardware chain */ - iop_desc_set_next_desc(old_chain_tail, grp_start->async_tx.phys); + next_dma = grp_start->async_tx.phys; + iop_desc_set_next_desc(old_chain_tail, next_dma); + BUG_ON(iop_desc_get_next_desc(old_chain_tail) != next_dma); /* flush */ - /* 1/ don't add pre-chained descriptors - * 2/ dummy read to flush next_desc write - */ - BUG_ON(iop_desc_get_next_desc(sw_desc)); + /* check for pre-chained descriptors */ + iop_paranoia(iop_desc_get_next_desc(sw_desc)); /* increment the pending count by the number of slots * memcpy operations have a 1:1 (slot:operation) relation diff --git a/drivers/edac/i5000_edac.c b/drivers/edac/i5000_edac.c index f0d9b415db5..d335086f4a2 100644 --- a/drivers/edac/i5000_edac.c +++ b/drivers/edac/i5000_edac.c @@ -1381,6 +1381,7 @@ static int i5000_probe1(struct pci_dev *pdev, int dev_idx) if (mci == NULL) return -ENOMEM; + kobject_get(&mci->edac_mci_kobj); debugf0("MC: " __FILE__ ": %s(): mci = %p\n", __func__, mci); mci->dev = &pdev->dev; /* record ptr to the generic device */ @@ -1453,6 +1454,7 @@ fail1: i5000_put_devices(mci); fail0: + kobject_put(&mci->edac_mci_kobj); edac_mc_free(mci); return -ENODEV; } @@ -1498,7 +1500,7 @@ static void __devexit i5000_remove_one(struct pci_dev *pdev) /* retrieve references to resources, and free those resources */ i5000_put_devices(mci); - + kobject_put(&mci->edac_mci_kobj); edac_mc_free(mci); } diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index 7f2ee27fe76..48f49d93d24 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -65,6 +65,14 @@ config GPIO_SYSFS # put expanders in the right section, in alphabetical order +comment "Memory mapped GPIO expanders:" + +config GPIO_XILINX + bool "Xilinx GPIO support" + depends on PPC_OF + help + Say yes here to support the Xilinx FPGA GPIO device + comment "I2C GPIO expanders:" config GPIO_MAX732X diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile index 6aafdeb9ad0..49ac64e515e 100644 --- a/drivers/gpio/Makefile +++ b/drivers/gpio/Makefile @@ -10,4 +10,5 @@ obj-$(CONFIG_GPIO_MCP23S08) += mcp23s08.o obj-$(CONFIG_GPIO_PCA953X) += pca953x.o obj-$(CONFIG_GPIO_PCF857X) += pcf857x.o obj-$(CONFIG_GPIO_TWL4030) += twl4030-gpio.o +obj-$(CONFIG_GPIO_XILINX) += xilinx_gpio.o obj-$(CONFIG_GPIO_BT8XX) += bt8xxgpio.o diff --git a/drivers/gpio/xilinx_gpio.c b/drivers/gpio/xilinx_gpio.c new file mode 100644 index 00000000000..3c1177abebd --- /dev/null +++ b/drivers/gpio/xilinx_gpio.c @@ -0,0 +1,235 @@ +/* + * Xilinx gpio driver + * + * Copyright 2008 Xilinx, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/init.h> +#include <linux/errno.h> +#include <linux/of_device.h> +#include <linux/of_platform.h> +#include <linux/of_gpio.h> +#include <linux/io.h> +#include <linux/gpio.h> + +/* Register Offset Definitions */ +#define XGPIO_DATA_OFFSET (0x0) /* Data register */ +#define XGPIO_TRI_OFFSET (0x4) /* I/O direction register */ + +struct xgpio_instance { + struct of_mm_gpio_chip mmchip; + u32 gpio_state; /* GPIO state shadow register */ + u32 gpio_dir; /* GPIO direction shadow register */ + spinlock_t gpio_lock; /* Lock used for synchronization */ +}; + +/** + * xgpio_get - Read the specified signal of the GPIO device. + * @gc: Pointer to gpio_chip device structure. + * @gpio: GPIO signal number. + * + * This function reads the specified signal of the GPIO device. It returns 0 if + * the signal clear, 1 if signal is set or negative value on error. + */ +static int xgpio_get(struct gpio_chip *gc, unsigned int gpio) +{ + struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); + + return (in_be32(mm_gc->regs + XGPIO_DATA_OFFSET) >> gpio) & 1; +} + +/** + * xgpio_set - Write the specified signal of the GPIO device. + * @gc: Pointer to gpio_chip device structure. + * @gpio: GPIO signal number. + * @val: Value to be written to specified signal. + * + * This function writes the specified value in to the specified signal of the + * GPIO device. + */ +static void xgpio_set(struct gpio_chip *gc, unsigned int gpio, int val) +{ + unsigned long flags; + struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); + struct xgpio_instance *chip = + container_of(mm_gc, struct xgpio_instance, mmchip); + + spin_lock_irqsave(&chip->gpio_lock, flags); + + /* Write to GPIO signal and set its direction to output */ + if (val) + chip->gpio_state |= 1 << gpio; + else + chip->gpio_state &= ~(1 << gpio); + out_be32(mm_gc->regs + XGPIO_DATA_OFFSET, chip->gpio_state); + + spin_unlock_irqrestore(&chip->gpio_lock, flags); +} + +/** + * xgpio_dir_in - Set the direction of the specified GPIO signal as input. + * @gc: Pointer to gpio_chip device structure. + * @gpio: GPIO signal number. + * + * This function sets the direction of specified GPIO signal as input. + * It returns 0 if direction of GPIO signals is set as input otherwise it + * returns negative error value. + */ +static int xgpio_dir_in(struct gpio_chip *gc, unsigned int gpio) +{ + unsigned long flags; + struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); + struct xgpio_instance *chip = + container_of(mm_gc, struct xgpio_instance, mmchip); + + spin_lock_irqsave(&chip->gpio_lock, flags); + + /* Set the GPIO bit in shadow register and set direction as input */ + chip->gpio_dir |= (1 << gpio); + out_be32(mm_gc->regs + XGPIO_TRI_OFFSET, chip->gpio_dir); + + spin_unlock_irqrestore(&chip->gpio_lock, flags); + + return 0; +} + +/** + * xgpio_dir_out - Set the direction of the specified GPIO signal as output. + * @gc: Pointer to gpio_chip device structure. + * @gpio: GPIO signal number. + * @val: Value to be written to specified signal. + * + * This function sets the direction of specified GPIO signal as output. If all + * GPIO signals of GPIO chip is configured as input then it returns + * error otherwise it returns 0. + */ +static int xgpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val) +{ + unsigned long flags; + struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); + struct xgpio_instance *chip = + container_of(mm_gc, struct xgpio_instance, mmchip); + + spin_lock_irqsave(&chip->gpio_lock, flags); + + /* Write state of GPIO signal */ + if (val) + chip->gpio_state |= 1 << gpio; + else + chip->gpio_state &= ~(1 << gpio); + out_be32(mm_gc->regs + XGPIO_DATA_OFFSET, chip->gpio_state); + + /* Clear the GPIO bit in shadow register and set direction as output */ + chip->gpio_dir &= (~(1 << gpio)); + out_be32(mm_gc->regs + XGPIO_TRI_OFFSET, chip->gpio_dir); + + spin_unlock_irqrestore(&chip->gpio_lock, flags); + + return 0; +} + +/** + * xgpio_save_regs - Set initial values of GPIO pins + * @mm_gc: pointer to memory mapped GPIO chip structure + */ +static void xgpio_save_regs(struct of_mm_gpio_chip *mm_gc) +{ + struct xgpio_instance *chip = + container_of(mm_gc, struct xgpio_instance, mmchip); + + out_be32(mm_gc->regs + XGPIO_DATA_OFFSET, chip->gpio_state); + out_be32(mm_gc->regs + XGPIO_TRI_OFFSET, chip->gpio_dir); +} + +/** + * xgpio_of_probe - Probe method for the GPIO device. + * @np: pointer to device tree node + * + * This function probes the GPIO device in the device tree. It initializes the + * driver data structure. It returns 0, if the driver is bound to the GPIO + * device, or a negative value if there is an error. + */ +static int __devinit xgpio_of_probe(struct device_node *np) +{ + struct xgpio_instance *chip; + struct of_gpio_chip *ofchip; + int status = 0; + const u32 *tree_info; + + chip = kzalloc(sizeof(*chip), GFP_KERNEL); + if (!chip) + return -ENOMEM; + ofchip = &chip->mmchip.of_gc; + + /* Update GPIO state shadow register with default value */ + tree_info = of_get_property(np, "xlnx,dout-default", NULL); + if (tree_info) + chip->gpio_state = *tree_info; + + /* Update GPIO direction shadow register with default value */ + chip->gpio_dir = 0xFFFFFFFF; /* By default, all pins are inputs */ + tree_info = of_get_property(np, "xlnx,tri-default", NULL); + if (tree_info) + chip->gpio_dir = *tree_info; + + /* Check device node and parent device node for device width */ + ofchip->gc.ngpio = 32; /* By default assume full GPIO controller */ + tree_info = of_get_property(np, "xlnx,gpio-width", NULL); + if (!tree_info) + tree_info = of_get_property(np->parent, + "xlnx,gpio-width", NULL); + if (tree_info) + ofchip->gc.ngpio = *tree_info; + + spin_lock_init(&chip->gpio_lock); + + ofchip->gpio_cells = 2; + ofchip->gc.direction_input = xgpio_dir_in; + ofchip->gc.direction_output = xgpio_dir_out; + ofchip->gc.get = xgpio_get; + ofchip->gc.set = xgpio_set; + + chip->mmchip.save_regs = xgpio_save_regs; + + /* Call the OF gpio helper to setup and register the GPIO device */ + status = of_mm_gpiochip_add(np, &chip->mmchip); + if (status) { + kfree(chip); + pr_err("%s: error in probe function with status %d\n", + np->full_name, status); + return status; + } + pr_info("XGpio: %s: registered\n", np->full_name); + return 0; +} + +static struct of_device_id xgpio_of_match[] __devinitdata = { + { .compatible = "xlnx,xps-gpio-1.00.a", }, + { /* end of list */ }, +}; + +static int __init xgpio_init(void) +{ + struct device_node *np; + + for_each_matching_node(np, xgpio_of_match) + xgpio_of_probe(np); + + return 0; +} + +/* Make sure we get initialized before anyone else tries to use us */ +subsys_initcall(xgpio_init); +/* No exit call at the moment as we cannot unregister of GPIO chips */ + +MODULE_AUTHOR("Xilinx, Inc."); +MODULE_DESCRIPTION("Xilinx GPIO driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/hid/hid-apple.c b/drivers/hid/hid-apple.c index c6ab4ba60c5..9b97795e45a 100644 --- a/drivers/hid/hid-apple.c +++ b/drivers/hid/hid-apple.c @@ -55,10 +55,11 @@ struct apple_key_translation { static struct apple_key_translation apple_fn_keys[] = { { KEY_BACKSPACE, KEY_DELETE }, + { KEY_ENTER, KEY_INSERT }, { KEY_F1, KEY_BRIGHTNESSDOWN, APPLE_FLAG_FKEY }, { KEY_F2, KEY_BRIGHTNESSUP, APPLE_FLAG_FKEY }, - { KEY_F3, KEY_FN_F5, APPLE_FLAG_FKEY }, /* Exposé */ - { KEY_F4, KEY_FN_F4, APPLE_FLAG_FKEY }, /* Dashboard */ + { KEY_F3, KEY_SCALE, APPLE_FLAG_FKEY }, + { KEY_F4, KEY_DASHBOARD, APPLE_FLAG_FKEY }, { KEY_F5, KEY_KBDILLUMDOWN, APPLE_FLAG_FKEY }, { KEY_F6, KEY_KBDILLUMUP, APPLE_FLAG_FKEY }, { KEY_F7, KEY_PREVIOUSSONG, APPLE_FLAG_FKEY }, @@ -418,6 +419,12 @@ static const struct hid_device_id apple_devices[] = { .driver_data = APPLE_HAS_FN | APPLE_ISO_KEYBOARD }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING2_JIS), .driver_data = APPLE_HAS_FN | APPLE_RDESC_JIS }, + { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING3_ANSI), + .driver_data = APPLE_HAS_FN }, + { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING3_ISO), + .driver_data = APPLE_HAS_FN | APPLE_ISO_KEYBOARD }, + { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING3_JIS), + .driver_data = APPLE_HAS_FN | APPLE_RDESC_JIS }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_TP_ONLY), .driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER1_TP_ONLY), diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c index d3671b4049c..147ec591a80 100644 --- a/drivers/hid/hid-core.c +++ b/drivers/hid/hid-core.c @@ -1250,9 +1250,11 @@ static const struct hid_device_id hid_blacklist[] = { { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING2_ANSI) }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING2_ISO) }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING2_JIS) }, + { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING3_ANSI) }, + { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING3_ISO) }, + { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING3_JIS) }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_TP_ONLY) }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER1_TP_ONLY) }, - { HID_USB_DEVICE(USB_VENDOR_ID_AVERMEDIA, USB_DEVICE_ID_AVER_FM_MR800) }, { HID_USB_DEVICE(USB_VENDOR_ID_BELKIN, USB_DEVICE_ID_FLIP_KVM) }, { HID_USB_DEVICE(USB_VENDOR_ID_BRIGHT, USB_DEVICE_ID_BRIGHT_ABNT2) }, { HID_USB_DEVICE(USB_VENDOR_ID_CHERRY, USB_DEVICE_ID_CHERRY_CYMOTION) }, @@ -1265,7 +1267,6 @@ static const struct hid_device_id hid_blacklist[] = { { HID_USB_DEVICE(USB_VENDOR_ID_EZKEY, USB_DEVICE_ID_BTC_8193) }, { HID_USB_DEVICE(USB_VENDOR_ID_GENERIC_13BA, USB_DEVICE_ID_GENERIC_13BA_KBD_MOUSE) }, { HID_USB_DEVICE(USB_VENDOR_ID_GYRATION, USB_DEVICE_ID_GYRATION_REMOTE) }, - { HID_USB_DEVICE(USB_VENDOR_ID_KWORLD, USB_DEVICE_ID_KWORLD_RADIO_FM700) }, { HID_USB_DEVICE(USB_VENDOR_ID_GYRATION, USB_DEVICE_ID_GYRATION_REMOTE_2) }, { HID_USB_DEVICE(USB_VENDOR_ID_LABTEC, USB_DEVICE_ID_LABTEC_WIRELESS_KEYBOARD) }, { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_MX3000_RECEIVER) }, @@ -1409,6 +1410,7 @@ static const struct hid_device_id hid_ignore_list[] = { { HID_USB_DEVICE(USB_VENDOR_ID_ALCOR, USB_DEVICE_ID_ALCOR_USBRS232) }, { HID_USB_DEVICE(USB_VENDOR_ID_ASUS, USB_DEVICE_ID_ASUS_LCM)}, { HID_USB_DEVICE(USB_VENDOR_ID_ASUS, USB_DEVICE_ID_ASUS_LCM2)}, + { HID_USB_DEVICE(USB_VENDOR_ID_AVERMEDIA, USB_DEVICE_ID_AVER_FM_MR800) }, { HID_USB_DEVICE(USB_VENDOR_ID_BERKSHIRE, USB_DEVICE_ID_BERKSHIRE_PCWD) }, { HID_USB_DEVICE(USB_VENDOR_ID_CIDC, 0x0103) }, { HID_USB_DEVICE(USB_VENDOR_ID_CYGNAL, USB_DEVICE_ID_CYGNAL_RADIO_SI470X) }, @@ -1486,6 +1488,7 @@ static const struct hid_device_id hid_ignore_list[] = { { HID_USB_DEVICE(USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_1007) }, { HID_USB_DEVICE(USB_VENDOR_ID_IMATION, USB_DEVICE_ID_DISC_STAKKA) }, { HID_USB_DEVICE(USB_VENDOR_ID_KBGEAR, USB_DEVICE_ID_KBGEAR_JAMSTUDIO) }, + { HID_USB_DEVICE(USB_VENDOR_ID_KWORLD, USB_DEVICE_ID_KWORLD_RADIO_FM700) }, { HID_USB_DEVICE(USB_VENDOR_ID_KYE, USB_DEVICE_ID_KYE_GPEN_560) }, { HID_USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_CASSY) }, { HID_USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_POCKETCASSY) }, @@ -1573,6 +1576,9 @@ static const struct hid_device_id hid_mouse_ignore_list[] = { { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING2_ANSI) }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING2_ISO) }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING2_JIS) }, + { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING3_ANSI) }, + { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING3_ISO) }, + { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING3_JIS) }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_TP_ONLY) }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER1_TP_ONLY) }, { } @@ -1730,7 +1736,7 @@ static int __init hid_init(void) goto err_bus; #ifdef CONFIG_HID_COMPAT - hid_compat_wq = create_workqueue("hid_compat"); + hid_compat_wq = create_singlethread_workqueue("hid_compat"); if (!hid_compat_wq) { hidraw_exit(); goto err; diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h index f05bcbbbb0d..d70075dd3d8 100644 --- a/drivers/hid/hid-ids.h +++ b/drivers/hid/hid-ids.h @@ -82,6 +82,9 @@ #define USB_DEVICE_ID_APPLE_WELLSPRING2_ANSI 0x0230 #define USB_DEVICE_ID_APPLE_WELLSPRING2_ISO 0x0231 #define USB_DEVICE_ID_APPLE_WELLSPRING2_JIS 0x0232 +#define USB_DEVICE_ID_APPLE_WELLSPRING3_ANSI 0x0236 +#define USB_DEVICE_ID_APPLE_WELLSPRING3_ISO 0x0237 +#define USB_DEVICE_ID_APPLE_WELLSPRING3_JIS 0x0238 #define USB_DEVICE_ID_APPLE_FOUNTAIN_TP_ONLY 0x030a #define USB_DEVICE_ID_APPLE_GEYSER1_TP_ONLY 0x030b #define USB_DEVICE_ID_APPLE_ATV_IRCONTROL 0x8241 diff --git a/drivers/hid/hidraw.c b/drivers/hid/hidraw.c index 894d52e05bf..7685ae6808c 100644 --- a/drivers/hid/hidraw.c +++ b/drivers/hid/hidraw.c @@ -38,7 +38,7 @@ static int hidraw_major; static struct cdev hidraw_cdev; static struct class *hidraw_class; static struct hidraw *hidraw_table[HIDRAW_MAX_DEVICES]; -static DEFINE_SPINLOCK(minors_lock); +static DEFINE_MUTEX(minors_lock); static ssize_t hidraw_read(struct file *file, char __user *buffer, size_t count, loff_t *ppos) { @@ -159,13 +159,13 @@ static int hidraw_open(struct inode *inode, struct file *file) struct hidraw_list *list; int err = 0; - lock_kernel(); if (!(list = kzalloc(sizeof(struct hidraw_list), GFP_KERNEL))) { err = -ENOMEM; goto out; } - spin_lock(&minors_lock); + lock_kernel(); + mutex_lock(&minors_lock); if (!hidraw_table[minor]) { printk(KERN_EMERG "hidraw device with minor %d doesn't exist\n", minor); @@ -180,13 +180,16 @@ static int hidraw_open(struct inode *inode, struct file *file) file->private_data = list; dev = hidraw_table[minor]; - if (!dev->open++) - dev->hid->ll_driver->open(dev->hid); + if (!dev->open++) { + err = dev->hid->ll_driver->open(dev->hid); + if (err < 0) + dev->open--; + } out_unlock: - spin_unlock(&minors_lock); -out: + mutex_unlock(&minors_lock); unlock_kernel(); +out: return err; } @@ -310,7 +313,7 @@ int hidraw_connect(struct hid_device *hid) result = -EINVAL; - spin_lock(&minors_lock); + mutex_lock(&minors_lock); for (minor = 0; minor < HIDRAW_MAX_DEVICES; minor++) { if (hidraw_table[minor]) @@ -320,9 +323,8 @@ int hidraw_connect(struct hid_device *hid) break; } - spin_unlock(&minors_lock); - if (result) { + mutex_unlock(&minors_lock); kfree(dev); goto out; } @@ -331,14 +333,14 @@ int hidraw_connect(struct hid_device *hid) NULL, "%s%d", "hidraw", minor); if (IS_ERR(dev->dev)) { - spin_lock(&minors_lock); hidraw_table[minor] = NULL; - spin_unlock(&minors_lock); + mutex_unlock(&minors_lock); result = PTR_ERR(dev->dev); kfree(dev); goto out; } + mutex_unlock(&minors_lock); init_waitqueue_head(&dev->wait); INIT_LIST_HEAD(&dev->list); @@ -360,9 +362,9 @@ void hidraw_disconnect(struct hid_device *hid) hidraw->exist = 0; - spin_lock(&minors_lock); + mutex_lock(&minors_lock); hidraw_table[hidraw->minor] = NULL; - spin_unlock(&minors_lock); + mutex_unlock(&minors_lock); device_destroy(hidraw_class, MKDEV(hidraw_major, hidraw->minor)); diff --git a/drivers/hid/usbhid/hid-core.c b/drivers/hid/usbhid/hid-core.c index 18e5ddd722c..d746bf8284d 100644 --- a/drivers/hid/usbhid/hid-core.c +++ b/drivers/hid/usbhid/hid-core.c @@ -781,6 +781,8 @@ static int usbhid_start(struct hid_device *hid) unsigned int n, insize = 0; int ret; + clear_bit(HID_DISCONNECTED, &usbhid->iofl); + usbhid->bufsize = HID_MIN_BUFFER_SIZE; hid_find_max_report(hid, HID_INPUT_REPORT, &usbhid->bufsize); hid_find_max_report(hid, HID_OUTPUT_REPORT, &usbhid->bufsize); @@ -847,12 +849,6 @@ static int usbhid_start(struct hid_device *hid) } } - if (!usbhid->urbin) { - err_hid("couldn't find an input interrupt endpoint"); - ret = -ENODEV; - goto fail; - } - init_waitqueue_head(&usbhid->wait); INIT_WORK(&usbhid->reset_work, hid_reset); setup_timer(&usbhid->io_retry, hid_retry_timeout, (unsigned long) hid); @@ -888,6 +884,9 @@ fail: usb_free_urb(usbhid->urbin); usb_free_urb(usbhid->urbout); usb_free_urb(usbhid->urbctrl); + usbhid->urbin = NULL; + usbhid->urbout = NULL; + usbhid->urbctrl = NULL; hid_free_buffers(dev, hid); mutex_unlock(&usbhid->setup); return ret; @@ -924,6 +923,9 @@ static void usbhid_stop(struct hid_device *hid) usb_free_urb(usbhid->urbin); usb_free_urb(usbhid->urbctrl); usb_free_urb(usbhid->urbout); + usbhid->urbin = NULL; /* don't mess up next start */ + usbhid->urbctrl = NULL; + usbhid->urbout = NULL; hid_free_buffers(hid_to_usb_dev(hid), hid); mutex_unlock(&usbhid->setup); @@ -940,15 +942,26 @@ static struct hid_ll_driver usb_hid_driver = { static int hid_probe(struct usb_interface *intf, const struct usb_device_id *id) { + struct usb_host_interface *interface = intf->cur_altsetting; struct usb_device *dev = interface_to_usbdev(intf); struct usbhid_device *usbhid; struct hid_device *hid; + unsigned int n, has_in = 0; size_t len; int ret; dbg_hid("HID probe called for ifnum %d\n", intf->altsetting->desc.bInterfaceNumber); + for (n = 0; n < interface->desc.bNumEndpoints; n++) + if (usb_endpoint_is_int_in(&interface->endpoint[n].desc)) + has_in++; + if (!has_in) { + dev_err(&intf->dev, "couldn't find an input interrupt " + "endpoint\n"); + return -ENODEV; + } + hid = hid_allocate_device(); if (IS_ERR(hid)) return PTR_ERR(hid); diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 6de1e0ffd39..c709e821f04 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -159,6 +159,16 @@ config SENSORS_ADM9240 This driver can also be built as a module. If so, the module will be called adm9240. +config SENSORS_ADT7462 + tristate "Analog Devices ADT7462" + depends on I2C && EXPERIMENTAL + help + If you say yes here you get support for the Analog Devices + ADT7462 temperature monitoring chips. + + This driver can also be built as a module. If so, the module + will be called adt7462. + config SENSORS_ADT7470 tristate "Analog Devices ADT7470" depends on I2C && EXPERIMENTAL @@ -825,6 +835,25 @@ config SENSORS_HDAPS Say Y here if you have an applicable laptop and want to experience the awesome power of hdaps. +config SENSORS_LIS3LV02D + tristate "STMicroeletronics LIS3LV02Dx three-axis digital accelerometer" + depends on ACPI && INPUT + default n + help + This driver provides support for the LIS3LV02Dx accelerometer. In + particular, it can be found in a number of HP laptops, which have the + "Mobile Data Protection System 3D" or "3D DriveGuard" feature. On such + systems the driver should load automatically (via ACPI). The + accelerometer might also be found in other systems, connected via SPI + or I2C. The accelerometer data is readable via + /sys/devices/platform/lis3lv02d. + + This driver also provides an absolute input class device, allowing + the laptop to act as a pinball machine-esque joystick. + + This driver can also be built as a module. If so, the module + will be called lis3lv02d. + config SENSORS_APPLESMC tristate "Apple SMC (Motion sensor, light sensor, keyboard backlight)" depends on INPUT && X86 diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile index 042d5a78622..58fc5be5355 100644 --- a/drivers/hwmon/Makefile +++ b/drivers/hwmon/Makefile @@ -25,6 +25,7 @@ obj-$(CONFIG_SENSORS_ADM1029) += adm1029.o obj-$(CONFIG_SENSORS_ADM1031) += adm1031.o obj-$(CONFIG_SENSORS_ADM9240) += adm9240.o obj-$(CONFIG_SENSORS_ADS7828) += ads7828.o +obj-$(CONFIG_SENSORS_ADT7462) += adt7462.o obj-$(CONFIG_SENSORS_ADT7470) += adt7470.o obj-$(CONFIG_SENSORS_ADT7473) += adt7473.o obj-$(CONFIG_SENSORS_APPLESMC) += applesmc.o @@ -48,6 +49,7 @@ obj-$(CONFIG_SENSORS_IBMAEM) += ibmaem.o obj-$(CONFIG_SENSORS_IBMPEX) += ibmpex.o obj-$(CONFIG_SENSORS_IT87) += it87.o obj-$(CONFIG_SENSORS_K8TEMP) += k8temp.o +obj-$(CONFIG_SENSORS_LIS3LV02D) += lis3lv02d.o obj-$(CONFIG_SENSORS_LM63) += lm63.o obj-$(CONFIG_SENSORS_LM70) += lm70.o obj-$(CONFIG_SENSORS_LM75) += lm75.o diff --git a/drivers/hwmon/adt7462.c b/drivers/hwmon/adt7462.c new file mode 100644 index 00000000000..66107b4dc12 --- /dev/null +++ b/drivers/hwmon/adt7462.c @@ -0,0 +1,2002 @@ +/* + * A hwmon driver for the Analog Devices ADT7462 + * Copyright (C) 2008 IBM + * + * Author: Darrick J. Wong <djwong@us.ibm.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/module.h> +#include <linux/jiffies.h> +#include <linux/i2c.h> +#include <linux/hwmon.h> +#include <linux/hwmon-sysfs.h> +#include <linux/err.h> +#include <linux/mutex.h> +#include <linux/delay.h> +#include <linux/log2.h> + +/* Addresses to scan */ +static const unsigned short normal_i2c[] = { 0x58, 0x5C, I2C_CLIENT_END }; + +/* Insmod parameters */ +I2C_CLIENT_INSMOD_1(adt7462); + +/* ADT7462 registers */ +#define ADT7462_REG_DEVICE 0x3D +#define ADT7462_REG_VENDOR 0x3E +#define ADT7462_REG_REVISION 0x3F + +#define ADT7462_REG_MIN_TEMP_BASE_ADDR 0x44 +#define ADT7462_REG_MIN_TEMP_MAX_ADDR 0x47 +#define ADT7462_REG_MAX_TEMP_BASE_ADDR 0x48 +#define ADT7462_REG_MAX_TEMP_MAX_ADDR 0x4B +#define ADT7462_REG_TEMP_BASE_ADDR 0x88 +#define ADT7462_REG_TEMP_MAX_ADDR 0x8F + +#define ADT7462_REG_FAN_BASE_ADDR 0x98 +#define ADT7462_REG_FAN_MAX_ADDR 0x9F +#define ADT7462_REG_FAN2_BASE_ADDR 0xA2 +#define ADT7462_REG_FAN2_MAX_ADDR 0xA9 +#define ADT7462_REG_FAN_ENABLE 0x07 +#define ADT7462_REG_FAN_MIN_BASE_ADDR 0x78 +#define ADT7462_REG_FAN_MIN_MAX_ADDR 0x7F + +#define ADT7462_REG_CFG2 0x02 +#define ADT7462_FSPD_MASK 0x20 + +#define ADT7462_REG_PWM_BASE_ADDR 0xAA +#define ADT7462_REG_PWM_MAX_ADDR 0xAD +#define ADT7462_REG_PWM_MIN_BASE_ADDR 0x28 +#define ADT7462_REG_PWM_MIN_MAX_ADDR 0x2B +#define ADT7462_REG_PWM_MAX 0x2C +#define ADT7462_REG_PWM_TEMP_MIN_BASE_ADDR 0x5C +#define ADT7462_REG_PWM_TEMP_MIN_MAX_ADDR 0x5F +#define ADT7462_REG_PWM_TEMP_RANGE_BASE_ADDR 0x60 +#define ADT7462_REG_PWM_TEMP_RANGE_MAX_ADDR 0x63 +#define ADT7462_PWM_HYST_MASK 0x0F +#define ADT7462_PWM_RANGE_MASK 0xF0 +#define ADT7462_PWM_RANGE_SHIFT 4 +#define ADT7462_REG_PWM_CFG_BASE_ADDR 0x21 +#define ADT7462_REG_PWM_CFG_MAX_ADDR 0x24 +#define ADT7462_PWM_CHANNEL_MASK 0xE0 +#define ADT7462_PWM_CHANNEL_SHIFT 5 + +#define ADT7462_REG_PIN_CFG_BASE_ADDR 0x10 +#define ADT7462_REG_PIN_CFG_MAX_ADDR 0x13 +#define ADT7462_PIN7_INPUT 0x01 /* cfg0 */ +#define ADT7462_DIODE3_INPUT 0x20 +#define ADT7462_DIODE1_INPUT 0x40 +#define ADT7462_VID_INPUT 0x80 +#define ADT7462_PIN22_INPUT 0x04 /* cfg1 */ +#define ADT7462_PIN21_INPUT 0x08 +#define ADT7462_PIN19_INPUT 0x10 +#define ADT7462_PIN15_INPUT 0x20 +#define ADT7462_PIN13_INPUT 0x40 +#define ADT7462_PIN8_INPUT 0x80 +#define ADT7462_PIN23_MASK 0x03 +#define ADT7462_PIN23_SHIFT 0 +#define ADT7462_PIN26_MASK 0x0C /* cfg2 */ +#define ADT7462_PIN26_SHIFT 2 +#define ADT7462_PIN25_MASK 0x30 +#define ADT7462_PIN25_SHIFT 4 +#define ADT7462_PIN24_MASK 0xC0 +#define ADT7462_PIN24_SHIFT 6 +#define ADT7462_PIN26_VOLT_INPUT 0x08 +#define ADT7462_PIN25_VOLT_INPUT 0x20 +#define ADT7462_PIN28_SHIFT 6 /* cfg3 */ +#define ADT7462_PIN28_VOLT 0x5 + +#define ADT7462_REG_ALARM1 0xB8 +#define ADT7462_LT_ALARM 0x02 +#define ADT7462_R1T_ALARM 0x04 +#define ADT7462_R2T_ALARM 0x08 +#define ADT7462_R3T_ALARM 0x10 +#define ADT7462_REG_ALARM2 0xBB +#define ADT7462_V0_ALARM 0x01 +#define ADT7462_V1_ALARM 0x02 +#define ADT7462_V2_ALARM 0x04 +#define ADT7462_V3_ALARM 0x08 +#define ADT7462_V4_ALARM 0x10 +#define ADT7462_V5_ALARM 0x20 +#define ADT7462_V6_ALARM 0x40 +#define ADT7462_V7_ALARM 0x80 +#define ADT7462_REG_ALARM3 0xBC +#define ADT7462_V8_ALARM 0x08 +#define ADT7462_V9_ALARM 0x10 +#define ADT7462_V10_ALARM 0x20 +#define ADT7462_V11_ALARM 0x40 +#define ADT7462_V12_ALARM 0x80 +#define ADT7462_REG_ALARM4 0xBD +#define ADT7462_F0_ALARM 0x01 +#define ADT7462_F1_ALARM 0x02 +#define ADT7462_F2_ALARM 0x04 +#define ADT7462_F3_ALARM 0x08 +#define ADT7462_F4_ALARM 0x10 +#define ADT7462_F5_ALARM 0x20 +#define ADT7462_F6_ALARM 0x40 +#define ADT7462_F7_ALARM 0x80 +#define ADT7462_ALARM1 0x0000 +#define ADT7462_ALARM2 0x0100 +#define ADT7462_ALARM3 0x0200 +#define ADT7462_ALARM4 0x0300 +#define ADT7462_ALARM_REG_SHIFT 8 +#define ADT7462_ALARM_FLAG_MASK 0x0F + +#define ADT7462_TEMP_COUNT 4 +#define ADT7462_TEMP_REG(x) (ADT7462_REG_TEMP_BASE_ADDR + (x * 2)) +#define ADT7462_TEMP_MIN_REG(x) (ADT7462_REG_MIN_TEMP_BASE_ADDR + (x)) +#define ADT7462_TEMP_MAX_REG(x) (ADT7462_REG_MAX_TEMP_BASE_ADDR + (x)) +#define TEMP_FRAC_OFFSET 6 + +#define ADT7462_FAN_COUNT 8 +#define ADT7462_REG_FAN_MIN(x) (ADT7462_REG_FAN_MIN_BASE_ADDR + (x)) + +#define ADT7462_PWM_COUNT 4 +#define ADT7462_REG_PWM(x) (ADT7462_REG_PWM_BASE_ADDR + (x)) +#define ADT7462_REG_PWM_MIN(x) (ADT7462_REG_PWM_MIN_BASE_ADDR + (x)) +#define ADT7462_REG_PWM_TMIN(x) \ + (ADT7462_REG_PWM_TEMP_MIN_BASE_ADDR + (x)) +#define ADT7462_REG_PWM_TRANGE(x) \ + (ADT7462_REG_PWM_TEMP_RANGE_BASE_ADDR + (x)) + +#define ADT7462_PIN_CFG_REG_COUNT 4 +#define ADT7462_REG_PIN_CFG(x) (ADT7462_REG_PIN_CFG_BASE_ADDR + (x)) +#define ADT7462_REG_PWM_CFG(x) (ADT7462_REG_PWM_CFG_BASE_ADDR + (x)) + +#define ADT7462_ALARM_REG_COUNT 4 + +/* + * The chip can measure 13 different voltage sources: + * + * 1. +12V1 (pin 7) + * 2. Vccp1/+2.5V/+1.8V/+1.5V (pin 23) + * 3. +12V3 (pin 22) + * 4. +5V (pin 21) + * 5. +1.25V/+0.9V (pin 19) + * 6. +2.5V/+1.8V (pin 15) + * 7. +3.3v (pin 13) + * 8. +12V2 (pin 8) + * 9. Vbatt/FSB_Vtt (pin 26) + * A. +3.3V/+1.2V1 (pin 25) + * B. Vccp2/+2.5V/+1.8V/+1.5V (pin 24) + * C. +1.5V ICH (only if BOTH pin 28/29 are set to +1.5V) + * D. +1.5V 3GPIO (only if BOTH pin 28/29 are set to +1.5V) + * + * Each of these 13 has a factor to convert raw to voltage. Even better, + * the pins can be connected to other sensors (tach/gpio/hot/etc), which + * makes the bookkeeping tricky. + * + * Some, but not all, of these voltages have low/high limits. + */ +#define ADT7462_VOLT_COUNT 12 + +#define ADT7462_VENDOR 0x41 +#define ADT7462_DEVICE 0x62 +/* datasheet only mentions a revision 4 */ +#define ADT7462_REVISION 0x04 + +/* How often do we reread sensors values? (In jiffies) */ +#define SENSOR_REFRESH_INTERVAL (2 * HZ) + +/* How often do we reread sensor limit values? (In jiffies) */ +#define LIMIT_REFRESH_INTERVAL (60 * HZ) + +/* datasheet says to divide this number by the fan reading to get fan rpm */ +#define FAN_PERIOD_TO_RPM(x) ((90000 * 60) / (x)) +#define FAN_RPM_TO_PERIOD FAN_PERIOD_TO_RPM +#define FAN_PERIOD_INVALID 65535 +#define FAN_DATA_VALID(x) ((x) && (x) != FAN_PERIOD_INVALID) + +#define MASK_AND_SHIFT(value, prefix) \ + (((value) & prefix##_MASK) >> prefix##_SHIFT) + +#define ROUND_DIV(x, divisor) (((x) + ((divisor) / 2)) / (divisor)) + +struct adt7462_data { + struct device *hwmon_dev; + struct attribute_group attrs; + struct mutex lock; + char sensors_valid; + char limits_valid; + unsigned long sensors_last_updated; /* In jiffies */ + unsigned long limits_last_updated; /* In jiffies */ + + u8 temp[ADT7462_TEMP_COUNT]; + /* bits 6-7 are quarter pieces of temp */ + u8 temp_frac[ADT7462_TEMP_COUNT]; + u8 temp_min[ADT7462_TEMP_COUNT]; + u8 temp_max[ADT7462_TEMP_COUNT]; + u16 fan[ADT7462_FAN_COUNT]; + u8 fan_enabled; + u8 fan_min[ADT7462_FAN_COUNT]; + u8 cfg2; + u8 pwm[ADT7462_PWM_COUNT]; + u8 pin_cfg[ADT7462_PIN_CFG_REG_COUNT]; + u8 voltages[ADT7462_VOLT_COUNT]; + u8 volt_max[ADT7462_VOLT_COUNT]; + u8 volt_min[ADT7462_VOLT_COUNT]; + u8 pwm_min[ADT7462_PWM_COUNT]; + u8 pwm_tmin[ADT7462_PWM_COUNT]; + u8 pwm_trange[ADT7462_PWM_COUNT]; + u8 pwm_max; /* only one per chip */ + u8 pwm_cfg[ADT7462_PWM_COUNT]; + u8 alarms[ADT7462_ALARM_REG_COUNT]; +}; + +static int adt7462_probe(struct i2c_client *client, + const struct i2c_device_id *id); +static int adt7462_detect(struct i2c_client *client, int kind, + struct i2c_board_info *info); +static int adt7462_remove(struct i2c_client *client); + +static const struct i2c_device_id adt7462_id[] = { + { "adt7462", adt7462 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, adt7462_id); + +static struct i2c_driver adt7462_driver = { + .class = I2C_CLASS_HWMON, + .driver = { + .name = "adt7462", + }, + .probe = adt7462_probe, + .remove = adt7462_remove, + .id_table = adt7462_id, + .detect = adt7462_detect, + .address_data = &addr_data, +}; + +/* + * 16-bit registers on the ADT7462 are low-byte first. The data sheet says + * that the low byte must be read before the high byte. + */ +static inline int adt7462_read_word_data(struct i2c_client *client, u8 reg) +{ + u16 foo; + foo = i2c_smbus_read_byte_data(client, reg); + foo |= ((u16)i2c_smbus_read_byte_data(client, reg + 1) << 8); + return foo; +} + +/* For some reason these registers are not contiguous. */ +static int ADT7462_REG_FAN(int fan) +{ + if (fan < 4) + return ADT7462_REG_FAN_BASE_ADDR + (2 * fan); + return ADT7462_REG_FAN2_BASE_ADDR + (2 * (fan - 4)); +} + +/* Voltage registers are scattered everywhere */ +static int ADT7462_REG_VOLT_MAX(struct adt7462_data *data, int which) +{ + switch (which) { + case 0: + if (!(data->pin_cfg[0] & ADT7462_PIN7_INPUT)) + return 0x7C; + break; + case 1: + return 0x69; + case 2: + if (!(data->pin_cfg[1] & ADT7462_PIN22_INPUT)) + return 0x7F; + break; + case 3: + if (!(data->pin_cfg[1] & ADT7462_PIN21_INPUT)) + return 0x7E; + break; + case 4: + if (!(data->pin_cfg[0] & ADT7462_DIODE3_INPUT)) + return 0x4B; + break; + case 5: + if (!(data->pin_cfg[0] & ADT7462_DIODE1_INPUT)) + return 0x49; + break; + case 6: + if (!(data->pin_cfg[1] & ADT7462_PIN13_INPUT)) + return 0x68; + break; + case 7: + if (!(data->pin_cfg[1] & ADT7462_PIN8_INPUT)) + return 0x7D; + break; + case 8: + if (!(data->pin_cfg[2] & ADT7462_PIN26_VOLT_INPUT)) + return 0x6C; + break; + case 9: + if (!(data->pin_cfg[2] & ADT7462_PIN25_VOLT_INPUT)) + return 0x6B; + break; + case 10: + return 0x6A; + case 11: + if (data->pin_cfg[3] >> ADT7462_PIN28_SHIFT == + ADT7462_PIN28_VOLT && + !(data->pin_cfg[0] & ADT7462_VID_INPUT)) + return 0x50; + break; + case 12: + if (data->pin_cfg[3] >> ADT7462_PIN28_SHIFT == + ADT7462_PIN28_VOLT && + !(data->pin_cfg[0] & ADT7462_VID_INPUT)) + return 0x4C; + break; + } + return -ENODEV; +} + +static int ADT7462_REG_VOLT_MIN(struct adt7462_data *data, int which) +{ + switch (which) { + case 0: + if (!(data->pin_cfg[0] & ADT7462_PIN7_INPUT)) + return 0x6D; + break; + case 1: + return 0x72; + case 2: + if (!(data->pin_cfg[1] & ADT7462_PIN22_INPUT)) + return 0x6F; + break; + case 3: + if (!(data->pin_cfg[1] & ADT7462_PIN21_INPUT)) + return 0x71; + break; + case 4: + if (!(data->pin_cfg[0] & ADT7462_DIODE3_INPUT)) + return 0x47; + break; + case 5: + if (!(data->pin_cfg[0] & ADT7462_DIODE1_INPUT)) + return 0x45; + break; + case 6: + if (!(data->pin_cfg[1] & ADT7462_PIN13_INPUT)) + return 0x70; + break; + case 7: + if (!(data->pin_cfg[1] & ADT7462_PIN8_INPUT)) + return 0x6E; + break; + case 8: + if (!(data->pin_cfg[2] & ADT7462_PIN26_VOLT_INPUT)) + return 0x75; + break; + case 9: + if (!(data->pin_cfg[2] & ADT7462_PIN25_VOLT_INPUT)) + return 0x74; + break; + case 10: + return 0x73; + case 11: + if (data->pin_cfg[3] >> ADT7462_PIN28_SHIFT == + ADT7462_PIN28_VOLT && + !(data->pin_cfg[0] & ADT7462_VID_INPUT)) + return 0x76; + break; + case 12: + if (data->pin_cfg[3] >> ADT7462_PIN28_SHIFT == + ADT7462_PIN28_VOLT && + !(data->pin_cfg[0] & ADT7462_VID_INPUT)) + return 0x77; + break; + } + return -ENODEV; +} + +static int ADT7462_REG_VOLT(struct adt7462_data *data, int which) +{ + switch (which) { + case 0: + if (!(data->pin_cfg[0] & ADT7462_PIN7_INPUT)) + return 0xA3; + break; + case 1: + return 0x90; + case 2: + if (!(data->pin_cfg[1] & ADT7462_PIN22_INPUT)) + return 0xA9; + break; + case 3: + if (!(data->pin_cfg[1] & ADT7462_PIN21_INPUT)) + return 0xA7; + break; + case 4: + if (!(data->pin_cfg[0] & ADT7462_DIODE3_INPUT)) + return 0x8F; + break; + case 5: + if (!(data->pin_cfg[0] & ADT7462_DIODE1_INPUT)) + return 0x8B; + break; + case 6: + if (!(data->pin_cfg[1] & ADT7462_PIN13_INPUT)) + return 0x96; + break; + case 7: + if (!(data->pin_cfg[1] & ADT7462_PIN8_INPUT)) + return 0xA5; + break; + case 8: + if (!(data->pin_cfg[2] & ADT7462_PIN26_VOLT_INPUT)) + return 0x93; + break; + case 9: + if (!(data->pin_cfg[2] & ADT7462_PIN25_VOLT_INPUT)) + return 0x92; + break; + case 10: + return 0x91; + case 11: + if (data->pin_cfg[3] >> ADT7462_PIN28_SHIFT == + ADT7462_PIN28_VOLT && + !(data->pin_cfg[0] & ADT7462_VID_INPUT)) + return 0x94; + break; + case 12: + if (data->pin_cfg[3] >> ADT7462_PIN28_SHIFT == + ADT7462_PIN28_VOLT && + !(data->pin_cfg[0] & ADT7462_VID_INPUT)) + return 0x95; + break; + } + return -ENODEV; +} + +/* Provide labels for sysfs */ +static const char *voltage_label(struct adt7462_data *data, int which) +{ + switch (which) { + case 0: + if (!(data->pin_cfg[0] & ADT7462_PIN7_INPUT)) + return "+12V1"; + break; + case 1: + switch (MASK_AND_SHIFT(data->pin_cfg[1], ADT7462_PIN23)) { + case 0: + return "Vccp1"; + case 1: + return "+2.5V"; + case 2: + return "+1.8V"; + case 3: + return "+1.5V"; + } + case 2: + if (!(data->pin_cfg[1] & ADT7462_PIN22_INPUT)) + return "+12V3"; + break; + case 3: + if (!(data->pin_cfg[1] & ADT7462_PIN21_INPUT)) + return "+5V"; + break; + case 4: + if (!(data->pin_cfg[0] & ADT7462_DIODE3_INPUT)) { + if (data->pin_cfg[1] & ADT7462_PIN19_INPUT) + return "+0.9V"; + return "+1.25V"; + } + break; + case 5: + if (!(data->pin_cfg[0] & ADT7462_DIODE1_INPUT)) { + if (data->pin_cfg[1] & ADT7462_PIN19_INPUT) + return "+1.8V"; + return "+2.5V"; + } + break; + case 6: + if (!(data->pin_cfg[1] & ADT7462_PIN13_INPUT)) + return "+3.3V"; + break; + case 7: + if (!(data->pin_cfg[1] & ADT7462_PIN8_INPUT)) + return "+12V2"; + break; + case 8: + switch (MASK_AND_SHIFT(data->pin_cfg[2], ADT7462_PIN26)) { + case 0: + return "Vbatt"; + case 1: + return "FSB_Vtt"; + } + break; + case 9: + switch (MASK_AND_SHIFT(data->pin_cfg[2], ADT7462_PIN25)) { + case 0: + return "+3.3V"; + case 1: + return "+1.2V1"; + } + break; + case 10: + switch (MASK_AND_SHIFT(data->pin_cfg[2], ADT7462_PIN24)) { + case 0: + return "Vccp2"; + case 1: + return "+2.5V"; + case 2: + return "+1.8V"; + case 3: + return "+1.5"; + } + case 11: + if (data->pin_cfg[3] >> ADT7462_PIN28_SHIFT == + ADT7462_PIN28_VOLT && + !(data->pin_cfg[0] & ADT7462_VID_INPUT)) + return "+1.5V ICH"; + break; + case 12: + if (data->pin_cfg[3] >> ADT7462_PIN28_SHIFT == + ADT7462_PIN28_VOLT && + !(data->pin_cfg[0] & ADT7462_VID_INPUT)) + return "+1.5V 3GPIO"; + break; + } + return "N/A"; +} + +/* Multipliers are actually in uV, not mV. */ +static int voltage_multiplier(struct adt7462_data *data, int which) +{ + switch (which) { + case 0: + if (!(data->pin_cfg[0] & ADT7462_PIN7_INPUT)) + return 62500; + break; + case 1: + switch (MASK_AND_SHIFT(data->pin_cfg[1], ADT7462_PIN23)) { + case 0: + if (data->pin_cfg[0] & ADT7462_VID_INPUT) + return 12500; + return 6250; + case 1: + return 13000; + case 2: + return 9400; + case 3: + return 7800; + } + case 2: + if (!(data->pin_cfg[1] & ADT7462_PIN22_INPUT)) + return 62500; + break; + case 3: + if (!(data->pin_cfg[1] & ADT7462_PIN21_INPUT)) + return 26000; + break; + case 4: + if (!(data->pin_cfg[0] & ADT7462_DIODE3_INPUT)) { + if (data->pin_cfg[1] & ADT7462_PIN19_INPUT) + return 4690; + return 6500; + } + break; + case 5: + if (!(data->pin_cfg[0] & ADT7462_DIODE1_INPUT)) { + if (data->pin_cfg[1] & ADT7462_PIN15_INPUT) + return 9400; + return 13000; + } + break; + case 6: + if (!(data->pin_cfg[1] & ADT7462_PIN13_INPUT)) + return 17200; + break; + case 7: + if (!(data->pin_cfg[1] & ADT7462_PIN8_INPUT)) + return 62500; + break; + case 8: + switch (MASK_AND_SHIFT(data->pin_cfg[2], ADT7462_PIN26)) { + case 0: + return 15600; + case 1: + return 6250; + } + break; + case 9: + switch (MASK_AND_SHIFT(data->pin_cfg[2], ADT7462_PIN25)) { + case 0: + return 17200; + case 1: + return 6250; + } + break; + case 10: + switch (MASK_AND_SHIFT(data->pin_cfg[2], ADT7462_PIN24)) { + case 0: + return 6250; + case 1: + return 13000; + case 2: + return 9400; + case 3: + return 7800; + } + case 11: + case 12: + if (data->pin_cfg[3] >> ADT7462_PIN28_SHIFT == + ADT7462_PIN28_VOLT && + !(data->pin_cfg[0] & ADT7462_VID_INPUT)) + return 7800; + } + return 0; +} + +static int temp_enabled(struct adt7462_data *data, int which) +{ + switch (which) { + case 0: + case 2: + return 1; + case 1: + if (data->pin_cfg[0] & ADT7462_DIODE1_INPUT) + return 1; + break; + case 3: + if (data->pin_cfg[0] & ADT7462_DIODE3_INPUT) + return 1; + break; + } + return 0; +} + +static const char *temp_label(struct adt7462_data *data, int which) +{ + switch (which) { + case 0: + return "local"; + case 1: + if (data->pin_cfg[0] & ADT7462_DIODE1_INPUT) + return "remote1"; + break; + case 2: + return "remote2"; + case 3: + if (data->pin_cfg[0] & ADT7462_DIODE3_INPUT) + return "remote3"; + break; + } + return "N/A"; +} + +/* Map Trange register values to mC */ +#define NUM_TRANGE_VALUES 16 +static const int trange_values[NUM_TRANGE_VALUES] = { + 2000, + 2500, + 3300, + 4000, + 5000, + 6700, + 8000, + 10000, + 13300, + 16000, + 20000, + 26700, + 32000, + 40000, + 53300, + 80000 +}; + +static int find_trange_value(int trange) +{ + int i; + + for (i = 0; i < NUM_TRANGE_VALUES; i++) + if (trange_values[i] == trange) + return i; + + return -ENODEV; +} + +static struct adt7462_data *adt7462_update_device(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct adt7462_data *data = i2c_get_clientdata(client); + unsigned long local_jiffies = jiffies; + int i; + + mutex_lock(&data->lock); + if (time_before(local_jiffies, data->sensors_last_updated + + SENSOR_REFRESH_INTERVAL) + && data->sensors_valid) + goto no_sensor_update; + + for (i = 0; i < ADT7462_TEMP_COUNT; i++) { + /* + * Reading the fractional register locks the integral + * register until both have been read. + */ + data->temp_frac[i] = i2c_smbus_read_byte_data(client, + ADT7462_TEMP_REG(i)); + data->temp[i] = i2c_smbus_read_byte_data(client, + ADT7462_TEMP_REG(i) + 1); + } + + for (i = 0; i < ADT7462_FAN_COUNT; i++) + data->fan[i] = adt7462_read_word_data(client, + ADT7462_REG_FAN(i)); + + data->fan_enabled = i2c_smbus_read_byte_data(client, + ADT7462_REG_FAN_ENABLE); + + for (i = 0; i < ADT7462_PWM_COUNT; i++) + data->pwm[i] = i2c_smbus_read_byte_data(client, + ADT7462_REG_PWM(i)); + + for (i = 0; i < ADT7462_PIN_CFG_REG_COUNT; i++) + data->pin_cfg[i] = i2c_smbus_read_byte_data(client, + ADT7462_REG_PIN_CFG(i)); + + for (i = 0; i < ADT7462_VOLT_COUNT; i++) { + int reg = ADT7462_REG_VOLT(data, i); + if (!reg) + data->voltages[i] = 0; + else + data->voltages[i] = i2c_smbus_read_byte_data(client, + reg); + } + + data->alarms[0] = i2c_smbus_read_byte_data(client, ADT7462_REG_ALARM1); + data->alarms[1] = i2c_smbus_read_byte_data(client, ADT7462_REG_ALARM2); + data->alarms[2] = i2c_smbus_read_byte_data(client, ADT7462_REG_ALARM3); + data->alarms[3] = i2c_smbus_read_byte_data(client, ADT7462_REG_ALARM4); + + data->sensors_last_updated = local_jiffies; + data->sensors_valid = 1; + +no_sensor_update: + if (time_before(local_jiffies, data->limits_last_updated + + LIMIT_REFRESH_INTERVAL) + && data->limits_valid) + goto out; + + for (i = 0; i < ADT7462_TEMP_COUNT; i++) { + data->temp_min[i] = i2c_smbus_read_byte_data(client, + ADT7462_TEMP_MIN_REG(i)); + data->temp_max[i] = i2c_smbus_read_byte_data(client, + ADT7462_TEMP_MAX_REG(i)); + } + + for (i = 0; i < ADT7462_FAN_COUNT; i++) + data->fan_min[i] = i2c_smbus_read_byte_data(client, + ADT7462_REG_FAN_MIN(i)); + + for (i = 0; i < ADT7462_VOLT_COUNT; i++) { + int reg = ADT7462_REG_VOLT_MAX(data, i); + data->volt_max[i] = + (reg ? i2c_smbus_read_byte_data(client, reg) : 0); + + reg = ADT7462_REG_VOLT_MIN(data, i); + data->volt_min[i] = + (reg ? i2c_smbus_read_byte_data(client, reg) : 0); + } + + for (i = 0; i < ADT7462_PWM_COUNT; i++) { + data->pwm_min[i] = i2c_smbus_read_byte_data(client, + ADT7462_REG_PWM_MIN(i)); + data->pwm_tmin[i] = i2c_smbus_read_byte_data(client, + ADT7462_REG_PWM_TMIN(i)); + data->pwm_trange[i] = i2c_smbus_read_byte_data(client, + ADT7462_REG_PWM_TRANGE(i)); + data->pwm_cfg[i] = i2c_smbus_read_byte_data(client, + ADT7462_REG_PWM_CFG(i)); + } + + data->pwm_max = i2c_smbus_read_byte_data(client, ADT7462_REG_PWM_MAX); + + data->cfg2 = i2c_smbus_read_byte_data(client, ADT7462_REG_CFG2); + + data->limits_last_updated = local_jiffies; + data->limits_valid = 1; + +out: + mutex_unlock(&data->lock); + return data; +} + +static ssize_t show_temp_min(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct adt7462_data *data = adt7462_update_device(dev); + + if (!temp_enabled(data, attr->index)) + return sprintf(buf, "0\n"); + + return sprintf(buf, "%d\n", 1000 * (data->temp_min[attr->index] - 64)); +} + +static ssize_t set_temp_min(struct device *dev, + struct device_attribute *devattr, + const char *buf, + size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct i2c_client *client = to_i2c_client(dev); + struct adt7462_data *data = i2c_get_clientdata(client); + long temp; + + if (strict_strtol(buf, 10, &temp) || !temp_enabled(data, attr->index)) + return -EINVAL; + + temp = ROUND_DIV(temp, 1000) + 64; + temp = SENSORS_LIMIT(temp, 0, 255); + + mutex_lock(&data->lock); + data->temp_min[attr->index] = temp; + i2c_smbus_write_byte_data(client, ADT7462_TEMP_MIN_REG(attr->index), + temp); + mutex_unlock(&data->lock); + + return count; +} + +static ssize_t show_temp_max(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct adt7462_data *data = adt7462_update_device(dev); + + if (!temp_enabled(data, attr->index)) + return sprintf(buf, "0\n"); + + return sprintf(buf, "%d\n", 1000 * (data->temp_max[attr->index] - 64)); +} + +static ssize_t set_temp_max(struct device *dev, + struct device_attribute *devattr, + const char *buf, + size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct i2c_client *client = to_i2c_client(dev); + struct adt7462_data *data = i2c_get_clientdata(client); + long temp; + + if (strict_strtol(buf, 10, &temp) || !temp_enabled(data, attr->index)) + return -EINVAL; + + temp = ROUND_DIV(temp, 1000) + 64; + temp = SENSORS_LIMIT(temp, 0, 255); + + mutex_lock(&data->lock); + data->temp_max[attr->index] = temp; + i2c_smbus_write_byte_data(client, ADT7462_TEMP_MAX_REG(attr->index), + temp); + mutex_unlock(&data->lock); + + return count; +} + +static ssize_t show_temp(struct device *dev, struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct adt7462_data *data = adt7462_update_device(dev); + u8 frac = data->temp_frac[attr->index] >> TEMP_FRAC_OFFSET; + + if (!temp_enabled(data, attr->index)) + return sprintf(buf, "0\n"); + + return sprintf(buf, "%d\n", 1000 * (data->temp[attr->index] - 64) + + 250 * frac); +} + +static ssize_t show_temp_label(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct adt7462_data *data = adt7462_update_device(dev); + + return sprintf(buf, "%s\n", temp_label(data, attr->index)); +} + +static ssize_t show_volt_max(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct adt7462_data *data = adt7462_update_device(dev); + int x = voltage_multiplier(data, attr->index); + + x *= data->volt_max[attr->index]; + x /= 1000; /* convert from uV to mV */ + + return sprintf(buf, "%d\n", x); +} + +static ssize_t set_volt_max(struct device *dev, + struct device_attribute *devattr, + const char *buf, + size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct i2c_client *client = to_i2c_client(dev); + struct adt7462_data *data = i2c_get_clientdata(client); + int x = voltage_multiplier(data, attr->index); + long temp; + + if (strict_strtol(buf, 10, &temp) || !x) + return -EINVAL; + + temp *= 1000; /* convert mV to uV */ + temp = ROUND_DIV(temp, x); + temp = SENSORS_LIMIT(temp, 0, 255); + + mutex_lock(&data->lock); + data->volt_max[attr->index] = temp; + i2c_smbus_write_byte_data(client, + ADT7462_REG_VOLT_MAX(data, attr->index), + temp); + mutex_unlock(&data->lock); + + return count; +} + +static ssize_t show_volt_min(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct adt7462_data *data = adt7462_update_device(dev); + int x = voltage_multiplier(data, attr->index); + + x *= data->volt_min[attr->index]; + x /= 1000; /* convert from uV to mV */ + + return sprintf(buf, "%d\n", x); +} + +static ssize_t set_volt_min(struct device *dev, + struct device_attribute *devattr, + const char *buf, + size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct i2c_client *client = to_i2c_client(dev); + struct adt7462_data *data = i2c_get_clientdata(client); + int x = voltage_multiplier(data, attr->index); + long temp; + + if (strict_strtol(buf, 10, &temp) || !x) + return -EINVAL; + + temp *= 1000; /* convert mV to uV */ + temp = ROUND_DIV(temp, x); + temp = SENSORS_LIMIT(temp, 0, 255); + + mutex_lock(&data->lock); + data->volt_min[attr->index] = temp; + i2c_smbus_write_byte_data(client, + ADT7462_REG_VOLT_MIN(data, attr->index), + temp); + mutex_unlock(&data->lock); + + return count; +} + +static ssize_t show_voltage(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct adt7462_data *data = adt7462_update_device(dev); + int x = voltage_multiplier(data, attr->index); + + x *= data->voltages[attr->index]; + x /= 1000; /* convert from uV to mV */ + + return sprintf(buf, "%d\n", x); +} + +static ssize_t show_voltage_label(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct adt7462_data *data = adt7462_update_device(dev); + + return sprintf(buf, "%s\n", voltage_label(data, attr->index)); +} + +static ssize_t show_alarm(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct adt7462_data *data = adt7462_update_device(dev); + int reg = attr->index >> ADT7462_ALARM_REG_SHIFT; + int mask = attr->index & ADT7462_ALARM_FLAG_MASK; + + if (data->alarms[reg] & mask) + return sprintf(buf, "1\n"); + else + return sprintf(buf, "0\n"); +} + +static int fan_enabled(struct adt7462_data *data, int fan) +{ + return data->fan_enabled & (1 << fan); +} + +static ssize_t show_fan_min(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct adt7462_data *data = adt7462_update_device(dev); + u16 temp; + + /* Only the MSB of the min fan period is stored... */ + temp = data->fan_min[attr->index]; + temp <<= 8; + + if (!fan_enabled(data, attr->index) || + !FAN_DATA_VALID(temp)) + return sprintf(buf, "0\n"); + + return sprintf(buf, "%d\n", FAN_PERIOD_TO_RPM(temp)); +} + +static ssize_t set_fan_min(struct device *dev, + struct device_attribute *devattr, + const char *buf, size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct i2c_client *client = to_i2c_client(dev); + struct adt7462_data *data = i2c_get_clientdata(client); + long temp; + + if (strict_strtol(buf, 10, &temp) || !temp || + !fan_enabled(data, attr->index)) + return -EINVAL; + + temp = FAN_RPM_TO_PERIOD(temp); + temp >>= 8; + temp = SENSORS_LIMIT(temp, 1, 255); + + mutex_lock(&data->lock); + data->fan_min[attr->index] = temp; + i2c_smbus_write_byte_data(client, ADT7462_REG_FAN_MIN(attr->index), + temp); + mutex_unlock(&data->lock); + + return count; +} + +static ssize_t show_fan(struct device *dev, struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct adt7462_data *data = adt7462_update_device(dev); + + if (!fan_enabled(data, attr->index) || + !FAN_DATA_VALID(data->fan[attr->index])) + return sprintf(buf, "0\n"); + + return sprintf(buf, "%d\n", + FAN_PERIOD_TO_RPM(data->fan[attr->index])); +} + +static ssize_t show_force_pwm_max(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct adt7462_data *data = adt7462_update_device(dev); + return sprintf(buf, "%d\n", (data->cfg2 & ADT7462_FSPD_MASK ? 1 : 0)); +} + +static ssize_t set_force_pwm_max(struct device *dev, + struct device_attribute *devattr, + const char *buf, + size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct adt7462_data *data = i2c_get_clientdata(client); + long temp; + u8 reg; + + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; + + mutex_lock(&data->lock); + reg = i2c_smbus_read_byte_data(client, ADT7462_REG_CFG2); + if (temp) + reg |= ADT7462_FSPD_MASK; + else + reg &= ~ADT7462_FSPD_MASK; + data->cfg2 = reg; + i2c_smbus_write_byte_data(client, ADT7462_REG_CFG2, reg); + mutex_unlock(&data->lock); + + return count; +} + +static ssize_t show_pwm(struct device *dev, struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct adt7462_data *data = adt7462_update_device(dev); + return sprintf(buf, "%d\n", data->pwm[attr->index]); +} + +static ssize_t set_pwm(struct device *dev, struct device_attribute *devattr, + const char *buf, size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct i2c_client *client = to_i2c_client(dev); + struct adt7462_data *data = i2c_get_clientdata(client); + long temp; + + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; + + temp = SENSORS_LIMIT(temp, 0, 255); + + mutex_lock(&data->lock); + data->pwm[attr->index] = temp; + i2c_smbus_write_byte_data(client, ADT7462_REG_PWM(attr->index), temp); + mutex_unlock(&data->lock); + + return count; +} + +static ssize_t show_pwm_max(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct adt7462_data *data = adt7462_update_device(dev); + return sprintf(buf, "%d\n", data->pwm_max); +} + +static ssize_t set_pwm_max(struct device *dev, + struct device_attribute *devattr, + const char *buf, + size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct adt7462_data *data = i2c_get_clientdata(client); + long temp; + + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; + + temp = SENSORS_LIMIT(temp, 0, 255); + + mutex_lock(&data->lock); + data->pwm_max = temp; + i2c_smbus_write_byte_data(client, ADT7462_REG_PWM_MAX, temp); + mutex_unlock(&data->lock); + + return count; +} + +static ssize_t show_pwm_min(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct adt7462_data *data = adt7462_update_device(dev); + return sprintf(buf, "%d\n", data->pwm_min[attr->index]); +} + +static ssize_t set_pwm_min(struct device *dev, + struct device_attribute *devattr, + const char *buf, + size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct i2c_client *client = to_i2c_client(dev); + struct adt7462_data *data = i2c_get_clientdata(client); + long temp; + + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; + + temp = SENSORS_LIMIT(temp, 0, 255); + + mutex_lock(&data->lock); + data->pwm_min[attr->index] = temp; + i2c_smbus_write_byte_data(client, ADT7462_REG_PWM_MIN(attr->index), + temp); + mutex_unlock(&data->lock); + + return count; +} + +static ssize_t show_pwm_hyst(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct adt7462_data *data = adt7462_update_device(dev); + return sprintf(buf, "%d\n", 1000 * + (data->pwm_trange[attr->index] & ADT7462_PWM_HYST_MASK)); +} + +static ssize_t set_pwm_hyst(struct device *dev, + struct device_attribute *devattr, + const char *buf, + size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct i2c_client *client = to_i2c_client(dev); + struct adt7462_data *data = i2c_get_clientdata(client); + long temp; + + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; + + temp = ROUND_DIV(temp, 1000); + temp = SENSORS_LIMIT(temp, 0, 15); + + /* package things up */ + temp &= ADT7462_PWM_HYST_MASK; + temp |= data->pwm_trange[attr->index] & ADT7462_PWM_RANGE_MASK; + + mutex_lock(&data->lock); + data->pwm_trange[attr->index] = temp; + i2c_smbus_write_byte_data(client, ADT7462_REG_PWM_TRANGE(attr->index), + temp); + mutex_unlock(&data->lock); + + return count; +} + +static ssize_t show_pwm_tmax(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct adt7462_data *data = adt7462_update_device(dev); + + /* tmax = tmin + trange */ + int trange = trange_values[data->pwm_trange[attr->index] >> + ADT7462_PWM_RANGE_SHIFT]; + int tmin = (data->pwm_tmin[attr->index] - 64) * 1000; + + return sprintf(buf, "%d\n", tmin + trange); +} + +static ssize_t set_pwm_tmax(struct device *dev, + struct device_attribute *devattr, + const char *buf, + size_t count) +{ + int temp; + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct i2c_client *client = to_i2c_client(dev); + struct adt7462_data *data = i2c_get_clientdata(client); + int tmin, trange_value; + long trange; + + if (strict_strtol(buf, 10, &trange)) + return -EINVAL; + + /* trange = tmax - tmin */ + tmin = (data->pwm_tmin[attr->index] - 64) * 1000; + trange_value = find_trange_value(trange - tmin); + + if (trange_value < 0) + return -EINVAL; + + temp = trange_value << ADT7462_PWM_RANGE_SHIFT; + temp |= data->pwm_trange[attr->index] & ADT7462_PWM_HYST_MASK; + + mutex_lock(&data->lock); + data->pwm_trange[attr->index] = temp; + i2c_smbus_write_byte_data(client, ADT7462_REG_PWM_TRANGE(attr->index), + temp); + mutex_unlock(&data->lock); + + return count; +} + +static ssize_t show_pwm_tmin(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct adt7462_data *data = adt7462_update_device(dev); + return sprintf(buf, "%d\n", 1000 * (data->pwm_tmin[attr->index] - 64)); +} + +static ssize_t set_pwm_tmin(struct device *dev, + struct device_attribute *devattr, + const char *buf, + size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct i2c_client *client = to_i2c_client(dev); + struct adt7462_data *data = i2c_get_clientdata(client); + long temp; + + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; + + temp = ROUND_DIV(temp, 1000) + 64; + temp = SENSORS_LIMIT(temp, 0, 255); + + mutex_lock(&data->lock); + data->pwm_tmin[attr->index] = temp; + i2c_smbus_write_byte_data(client, ADT7462_REG_PWM_TMIN(attr->index), + temp); + mutex_unlock(&data->lock); + + return count; +} + +static ssize_t show_pwm_auto(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct adt7462_data *data = adt7462_update_device(dev); + int cfg = data->pwm_cfg[attr->index] >> ADT7462_PWM_CHANNEL_SHIFT; + + switch (cfg) { + case 4: /* off */ + return sprintf(buf, "0\n"); + case 7: /* manual */ + return sprintf(buf, "1\n"); + default: /* automatic */ + return sprintf(buf, "2\n"); + } +} + +static void set_pwm_channel(struct i2c_client *client, + struct adt7462_data *data, + int which, + int value) +{ + int temp = data->pwm_cfg[which] & ~ADT7462_PWM_CHANNEL_MASK; + temp |= value << ADT7462_PWM_CHANNEL_SHIFT; + + mutex_lock(&data->lock); + data->pwm_cfg[which] = temp; + i2c_smbus_write_byte_data(client, ADT7462_REG_PWM_CFG(which), temp); + mutex_unlock(&data->lock); +} + +static ssize_t set_pwm_auto(struct device *dev, + struct device_attribute *devattr, + const char *buf, + size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct i2c_client *client = to_i2c_client(dev); + struct adt7462_data *data = i2c_get_clientdata(client); + long temp; + + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; + + switch (temp) { + case 0: /* off */ + set_pwm_channel(client, data, attr->index, 4); + return count; + case 1: /* manual */ + set_pwm_channel(client, data, attr->index, 7); + return count; + default: + return -EINVAL; + } +} + +static ssize_t show_pwm_auto_temp(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct adt7462_data *data = adt7462_update_device(dev); + int channel = data->pwm_cfg[attr->index] >> ADT7462_PWM_CHANNEL_SHIFT; + + switch (channel) { + case 0: /* temp[1234] only */ + case 1: + case 2: + case 3: + return sprintf(buf, "%d\n", (1 << channel)); + case 5: /* temp1 & temp4 */ + return sprintf(buf, "9\n"); + case 6: + return sprintf(buf, "15\n"); + default: + return sprintf(buf, "0\n"); + } +} + +static int cvt_auto_temp(int input) +{ + if (input == 0xF) + return 6; + if (input == 0x9) + return 5; + if (input < 1 || !is_power_of_2(input)) + return -EINVAL; + return ilog2(input); +} + +static ssize_t set_pwm_auto_temp(struct device *dev, + struct device_attribute *devattr, + const char *buf, + size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct i2c_client *client = to_i2c_client(dev); + struct adt7462_data *data = i2c_get_clientdata(client); + long temp; + + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; + + temp = cvt_auto_temp(temp); + if (temp < 0) + return temp; + + set_pwm_channel(client, data, attr->index, temp); + + return count; +} + +static SENSOR_DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, show_temp_max, + set_temp_max, 0); +static SENSOR_DEVICE_ATTR(temp2_max, S_IWUSR | S_IRUGO, show_temp_max, + set_temp_max, 1); +static SENSOR_DEVICE_ATTR(temp3_max, S_IWUSR | S_IRUGO, show_temp_max, + set_temp_max, 2); +static SENSOR_DEVICE_ATTR(temp4_max, S_IWUSR | S_IRUGO, show_temp_max, + set_temp_max, 3); + +static SENSOR_DEVICE_ATTR(temp1_min, S_IWUSR | S_IRUGO, show_temp_min, + set_temp_min, 0); +static SENSOR_DEVICE_ATTR(temp2_min, S_IWUSR | S_IRUGO, show_temp_min, + set_temp_min, 1); +static SENSOR_DEVICE_ATTR(temp3_min, S_IWUSR | S_IRUGO, show_temp_min, + set_temp_min, 2); +static SENSOR_DEVICE_ATTR(temp4_min, S_IWUSR | S_IRUGO, show_temp_min, + set_temp_min, 3); + +static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL, 0); +static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, show_temp, NULL, 1); +static SENSOR_DEVICE_ATTR(temp3_input, S_IRUGO, show_temp, NULL, 2); +static SENSOR_DEVICE_ATTR(temp4_input, S_IRUGO, show_temp, NULL, 3); + +static SENSOR_DEVICE_ATTR(temp1_label, S_IRUGO, show_temp_label, NULL, 0); +static SENSOR_DEVICE_ATTR(temp2_label, S_IRUGO, show_temp_label, NULL, 1); +static SENSOR_DEVICE_ATTR(temp3_label, S_IRUGO, show_temp_label, NULL, 2); +static SENSOR_DEVICE_ATTR(temp4_label, S_IRUGO, show_temp_label, NULL, 3); + +static SENSOR_DEVICE_ATTR(temp1_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM1 | ADT7462_LT_ALARM); +static SENSOR_DEVICE_ATTR(temp2_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM1 | ADT7462_R1T_ALARM); +static SENSOR_DEVICE_ATTR(temp3_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM1 | ADT7462_R2T_ALARM); +static SENSOR_DEVICE_ATTR(temp4_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM1 | ADT7462_R3T_ALARM); + +static SENSOR_DEVICE_ATTR(in1_max, S_IWUSR | S_IRUGO, show_volt_max, + set_volt_max, 0); +static SENSOR_DEVICE_ATTR(in2_max, S_IWUSR | S_IRUGO, show_volt_max, + set_volt_max, 1); +static SENSOR_DEVICE_ATTR(in3_max, S_IWUSR | S_IRUGO, show_volt_max, + set_volt_max, 2); +static SENSOR_DEVICE_ATTR(in4_max, S_IWUSR | S_IRUGO, show_volt_max, + set_volt_max, 3); +static SENSOR_DEVICE_ATTR(in5_max, S_IWUSR | S_IRUGO, show_volt_max, + set_volt_max, 4); +static SENSOR_DEVICE_ATTR(in6_max, S_IWUSR | S_IRUGO, show_volt_max, + set_volt_max, 5); +static SENSOR_DEVICE_ATTR(in7_max, S_IWUSR | S_IRUGO, show_volt_max, + set_volt_max, 6); +static SENSOR_DEVICE_ATTR(in8_max, S_IWUSR | S_IRUGO, show_volt_max, + set_volt_max, 7); +static SENSOR_DEVICE_ATTR(in9_max, S_IWUSR | S_IRUGO, show_volt_max, + set_volt_max, 8); +static SENSOR_DEVICE_ATTR(in10_max, S_IWUSR | S_IRUGO, show_volt_max, + set_volt_max, 9); +static SENSOR_DEVICE_ATTR(in11_max, S_IWUSR | S_IRUGO, show_volt_max, + set_volt_max, 10); +static SENSOR_DEVICE_ATTR(in12_max, S_IWUSR | S_IRUGO, show_volt_max, + set_volt_max, 11); +static SENSOR_DEVICE_ATTR(in13_max, S_IWUSR | S_IRUGO, show_volt_max, + set_volt_max, 12); + +static SENSOR_DEVICE_ATTR(in1_min, S_IWUSR | S_IRUGO, show_volt_min, + set_volt_min, 0); +static SENSOR_DEVICE_ATTR(in2_min, S_IWUSR | S_IRUGO, show_volt_min, + set_volt_min, 1); +static SENSOR_DEVICE_ATTR(in3_min, S_IWUSR | S_IRUGO, show_volt_min, + set_volt_min, 2); +static SENSOR_DEVICE_ATTR(in4_min, S_IWUSR | S_IRUGO, show_volt_min, + set_volt_min, 3); +static SENSOR_DEVICE_ATTR(in5_min, S_IWUSR | S_IRUGO, show_volt_min, + set_volt_min, 4); +static SENSOR_DEVICE_ATTR(in6_min, S_IWUSR | S_IRUGO, show_volt_min, + set_volt_min, 5); +static SENSOR_DEVICE_ATTR(in7_min, S_IWUSR | S_IRUGO, show_volt_min, + set_volt_min, 6); +static SENSOR_DEVICE_ATTR(in8_min, S_IWUSR | S_IRUGO, show_volt_min, + set_volt_min, 7); +static SENSOR_DEVICE_ATTR(in9_min, S_IWUSR | S_IRUGO, show_volt_min, + set_volt_min, 8); +static SENSOR_DEVICE_ATTR(in10_min, S_IWUSR | S_IRUGO, show_volt_min, + set_volt_min, 9); +static SENSOR_DEVICE_ATTR(in11_min, S_IWUSR | S_IRUGO, show_volt_min, + set_volt_min, 10); +static SENSOR_DEVICE_ATTR(in12_min, S_IWUSR | S_IRUGO, show_volt_min, + set_volt_min, 11); +static SENSOR_DEVICE_ATTR(in13_min, S_IWUSR | S_IRUGO, show_volt_min, + set_volt_min, 12); + +static SENSOR_DEVICE_ATTR(in1_input, S_IRUGO, show_voltage, NULL, 0); +static SENSOR_DEVICE_ATTR(in2_input, S_IRUGO, show_voltage, NULL, 1); +static SENSOR_DEVICE_ATTR(in3_input, S_IRUGO, show_voltage, NULL, 2); +static SENSOR_DEVICE_ATTR(in4_input, S_IRUGO, show_voltage, NULL, 3); +static SENSOR_DEVICE_ATTR(in5_input, S_IRUGO, show_voltage, NULL, 4); +static SENSOR_DEVICE_ATTR(in6_input, S_IRUGO, show_voltage, NULL, 5); +static SENSOR_DEVICE_ATTR(in7_input, S_IRUGO, show_voltage, NULL, 6); +static SENSOR_DEVICE_ATTR(in8_input, S_IRUGO, show_voltage, NULL, 7); +static SENSOR_DEVICE_ATTR(in9_input, S_IRUGO, show_voltage, NULL, 8); +static SENSOR_DEVICE_ATTR(in10_input, S_IRUGO, show_voltage, NULL, 9); +static SENSOR_DEVICE_ATTR(in11_input, S_IRUGO, show_voltage, NULL, 10); +static SENSOR_DEVICE_ATTR(in12_input, S_IRUGO, show_voltage, NULL, 11); +static SENSOR_DEVICE_ATTR(in13_input, S_IRUGO, show_voltage, NULL, 12); + +static SENSOR_DEVICE_ATTR(in1_label, S_IRUGO, show_voltage_label, NULL, 0); +static SENSOR_DEVICE_ATTR(in2_label, S_IRUGO, show_voltage_label, NULL, 1); +static SENSOR_DEVICE_ATTR(in3_label, S_IRUGO, show_voltage_label, NULL, 2); +static SENSOR_DEVICE_ATTR(in4_label, S_IRUGO, show_voltage_label, NULL, 3); +static SENSOR_DEVICE_ATTR(in5_label, S_IRUGO, show_voltage_label, NULL, 4); +static SENSOR_DEVICE_ATTR(in6_label, S_IRUGO, show_voltage_label, NULL, 5); +static SENSOR_DEVICE_ATTR(in7_label, S_IRUGO, show_voltage_label, NULL, 6); +static SENSOR_DEVICE_ATTR(in8_label, S_IRUGO, show_voltage_label, NULL, 7); +static SENSOR_DEVICE_ATTR(in9_label, S_IRUGO, show_voltage_label, NULL, 8); +static SENSOR_DEVICE_ATTR(in10_label, S_IRUGO, show_voltage_label, NULL, 9); +static SENSOR_DEVICE_ATTR(in11_label, S_IRUGO, show_voltage_label, NULL, 10); +static SENSOR_DEVICE_ATTR(in12_label, S_IRUGO, show_voltage_label, NULL, 11); +static SENSOR_DEVICE_ATTR(in13_label, S_IRUGO, show_voltage_label, NULL, 12); + +static SENSOR_DEVICE_ATTR(in1_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM2 | ADT7462_V0_ALARM); +static SENSOR_DEVICE_ATTR(in2_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM2 | ADT7462_V7_ALARM); +static SENSOR_DEVICE_ATTR(in3_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM2 | ADT7462_V2_ALARM); +static SENSOR_DEVICE_ATTR(in4_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM2 | ADT7462_V6_ALARM); +static SENSOR_DEVICE_ATTR(in5_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM2 | ADT7462_V5_ALARM); +static SENSOR_DEVICE_ATTR(in6_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM2 | ADT7462_V4_ALARM); +static SENSOR_DEVICE_ATTR(in7_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM2 | ADT7462_V3_ALARM); +static SENSOR_DEVICE_ATTR(in8_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM2 | ADT7462_V1_ALARM); +static SENSOR_DEVICE_ATTR(in9_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM3 | ADT7462_V10_ALARM); +static SENSOR_DEVICE_ATTR(in10_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM3 | ADT7462_V9_ALARM); +static SENSOR_DEVICE_ATTR(in11_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM3 | ADT7462_V8_ALARM); +static SENSOR_DEVICE_ATTR(in12_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM3 | ADT7462_V11_ALARM); +static SENSOR_DEVICE_ATTR(in13_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM3 | ADT7462_V12_ALARM); + +static SENSOR_DEVICE_ATTR(fan1_min, S_IWUSR | S_IRUGO, show_fan_min, + set_fan_min, 0); +static SENSOR_DEVICE_ATTR(fan2_min, S_IWUSR | S_IRUGO, show_fan_min, + set_fan_min, 1); +static SENSOR_DEVICE_ATTR(fan3_min, S_IWUSR | S_IRUGO, show_fan_min, + set_fan_min, 2); +static SENSOR_DEVICE_ATTR(fan4_min, S_IWUSR | S_IRUGO, show_fan_min, + set_fan_min, 3); +static SENSOR_DEVICE_ATTR(fan5_min, S_IWUSR | S_IRUGO, show_fan_min, + set_fan_min, 4); +static SENSOR_DEVICE_ATTR(fan6_min, S_IWUSR | S_IRUGO, show_fan_min, + set_fan_min, 5); +static SENSOR_DEVICE_ATTR(fan7_min, S_IWUSR | S_IRUGO, show_fan_min, + set_fan_min, 6); +static SENSOR_DEVICE_ATTR(fan8_min, S_IWUSR | S_IRUGO, show_fan_min, + set_fan_min, 7); + +static SENSOR_DEVICE_ATTR(fan1_input, S_IRUGO, show_fan, NULL, 0); +static SENSOR_DEVICE_ATTR(fan2_input, S_IRUGO, show_fan, NULL, 1); +static SENSOR_DEVICE_ATTR(fan3_input, S_IRUGO, show_fan, NULL, 2); +static SENSOR_DEVICE_ATTR(fan4_input, S_IRUGO, show_fan, NULL, 3); +static SENSOR_DEVICE_ATTR(fan5_input, S_IRUGO, show_fan, NULL, 4); +static SENSOR_DEVICE_ATTR(fan6_input, S_IRUGO, show_fan, NULL, 5); +static SENSOR_DEVICE_ATTR(fan7_input, S_IRUGO, show_fan, NULL, 6); +static SENSOR_DEVICE_ATTR(fan8_input, S_IRUGO, show_fan, NULL, 7); + +static SENSOR_DEVICE_ATTR(fan1_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM4 | ADT7462_F0_ALARM); +static SENSOR_DEVICE_ATTR(fan2_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM4 | ADT7462_F1_ALARM); +static SENSOR_DEVICE_ATTR(fan3_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM4 | ADT7462_F2_ALARM); +static SENSOR_DEVICE_ATTR(fan4_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM4 | ADT7462_F3_ALARM); +static SENSOR_DEVICE_ATTR(fan5_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM4 | ADT7462_F4_ALARM); +static SENSOR_DEVICE_ATTR(fan6_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM4 | ADT7462_F5_ALARM); +static SENSOR_DEVICE_ATTR(fan7_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM4 | ADT7462_F6_ALARM); +static SENSOR_DEVICE_ATTR(fan8_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM4 | ADT7462_F7_ALARM); + +static SENSOR_DEVICE_ATTR(force_pwm_max, S_IWUSR | S_IRUGO, + show_force_pwm_max, set_force_pwm_max, 0); + +static SENSOR_DEVICE_ATTR(pwm1, S_IWUSR | S_IRUGO, show_pwm, set_pwm, 0); +static SENSOR_DEVICE_ATTR(pwm2, S_IWUSR | S_IRUGO, show_pwm, set_pwm, 1); +static SENSOR_DEVICE_ATTR(pwm3, S_IWUSR | S_IRUGO, show_pwm, set_pwm, 2); +static SENSOR_DEVICE_ATTR(pwm4, S_IWUSR | S_IRUGO, show_pwm, set_pwm, 3); + +static SENSOR_DEVICE_ATTR(pwm1_auto_point1_pwm, S_IWUSR | S_IRUGO, + show_pwm_min, set_pwm_min, 0); +static SENSOR_DEVICE_ATTR(pwm2_auto_point1_pwm, S_IWUSR | S_IRUGO, + show_pwm_min, set_pwm_min, 1); +static SENSOR_DEVICE_ATTR(pwm3_auto_point1_pwm, S_IWUSR | S_IRUGO, + show_pwm_min, set_pwm_min, 2); +static SENSOR_DEVICE_ATTR(pwm4_auto_point1_pwm, S_IWUSR | S_IRUGO, + show_pwm_min, set_pwm_min, 3); + +static SENSOR_DEVICE_ATTR(pwm1_auto_point2_pwm, S_IWUSR | S_IRUGO, + show_pwm_max, set_pwm_max, 0); +static SENSOR_DEVICE_ATTR(pwm2_auto_point2_pwm, S_IWUSR | S_IRUGO, + show_pwm_max, set_pwm_max, 1); +static SENSOR_DEVICE_ATTR(pwm3_auto_point2_pwm, S_IWUSR | S_IRUGO, + show_pwm_max, set_pwm_max, 2); +static SENSOR_DEVICE_ATTR(pwm4_auto_point2_pwm, S_IWUSR | S_IRUGO, + show_pwm_max, set_pwm_max, 3); + +static SENSOR_DEVICE_ATTR(temp1_auto_point1_hyst, S_IWUSR | S_IRUGO, + show_pwm_hyst, set_pwm_hyst, 0); +static SENSOR_DEVICE_ATTR(temp2_auto_point1_hyst, S_IWUSR | S_IRUGO, + show_pwm_hyst, set_pwm_hyst, 1); +static SENSOR_DEVICE_ATTR(temp3_auto_point1_hyst, S_IWUSR | S_IRUGO, + show_pwm_hyst, set_pwm_hyst, 2); +static SENSOR_DEVICE_ATTR(temp4_auto_point1_hyst, S_IWUSR | S_IRUGO, + show_pwm_hyst, set_pwm_hyst, 3); + +static SENSOR_DEVICE_ATTR(temp1_auto_point2_hyst, S_IWUSR | S_IRUGO, + show_pwm_hyst, set_pwm_hyst, 0); +static SENSOR_DEVICE_ATTR(temp2_auto_point2_hyst, S_IWUSR | S_IRUGO, + show_pwm_hyst, set_pwm_hyst, 1); +static SENSOR_DEVICE_ATTR(temp3_auto_point2_hyst, S_IWUSR | S_IRUGO, + show_pwm_hyst, set_pwm_hyst, 2); +static SENSOR_DEVICE_ATTR(temp4_auto_point2_hyst, S_IWUSR | S_IRUGO, + show_pwm_hyst, set_pwm_hyst, 3); + +static SENSOR_DEVICE_ATTR(temp1_auto_point1_temp, S_IWUSR | S_IRUGO, + show_pwm_tmin, set_pwm_tmin, 0); +static SENSOR_DEVICE_ATTR(temp2_auto_point1_temp, S_IWUSR | S_IRUGO, + show_pwm_tmin, set_pwm_tmin, 1); +static SENSOR_DEVICE_ATTR(temp3_auto_point1_temp, S_IWUSR | S_IRUGO, + show_pwm_tmin, set_pwm_tmin, 2); +static SENSOR_DEVICE_ATTR(temp4_auto_point1_temp, S_IWUSR | S_IRUGO, + show_pwm_tmin, set_pwm_tmin, 3); + +static SENSOR_DEVICE_ATTR(temp1_auto_point2_temp, S_IWUSR | S_IRUGO, + show_pwm_tmax, set_pwm_tmax, 0); +static SENSOR_DEVICE_ATTR(temp2_auto_point2_temp, S_IWUSR | S_IRUGO, + show_pwm_tmax, set_pwm_tmax, 1); +static SENSOR_DEVICE_ATTR(temp3_auto_point2_temp, S_IWUSR | S_IRUGO, + show_pwm_tmax, set_pwm_tmax, 2); +static SENSOR_DEVICE_ATTR(temp4_auto_point2_temp, S_IWUSR | S_IRUGO, + show_pwm_tmax, set_pwm_tmax, 3); + +static SENSOR_DEVICE_ATTR(pwm1_enable, S_IWUSR | S_IRUGO, show_pwm_auto, + set_pwm_auto, 0); +static SENSOR_DEVICE_ATTR(pwm2_enable, S_IWUSR | S_IRUGO, show_pwm_auto, + set_pwm_auto, 1); +static SENSOR_DEVICE_ATTR(pwm3_enable, S_IWUSR | S_IRUGO, show_pwm_auto, + set_pwm_auto, 2); +static SENSOR_DEVICE_ATTR(pwm4_enable, S_IWUSR | S_IRUGO, show_pwm_auto, + set_pwm_auto, 3); + +static SENSOR_DEVICE_ATTR(pwm1_auto_channels_temp, S_IWUSR | S_IRUGO, + show_pwm_auto_temp, set_pwm_auto_temp, 0); +static SENSOR_DEVICE_ATTR(pwm2_auto_channels_temp, S_IWUSR | S_IRUGO, + show_pwm_auto_temp, set_pwm_auto_temp, 1); +static SENSOR_DEVICE_ATTR(pwm3_auto_channels_temp, S_IWUSR | S_IRUGO, + show_pwm_auto_temp, set_pwm_auto_temp, 2); +static SENSOR_DEVICE_ATTR(pwm4_auto_channels_temp, S_IWUSR | S_IRUGO, + show_pwm_auto_temp, set_pwm_auto_temp, 3); + +static struct attribute *adt7462_attr[] = +{ + &sensor_dev_attr_temp1_max.dev_attr.attr, + &sensor_dev_attr_temp2_max.dev_attr.attr, + &sensor_dev_attr_temp3_max.dev_attr.attr, + &sensor_dev_attr_temp4_max.dev_attr.attr, + + &sensor_dev_attr_temp1_min.dev_attr.attr, + &sensor_dev_attr_temp2_min.dev_attr.attr, + &sensor_dev_attr_temp3_min.dev_attr.attr, + &sensor_dev_attr_temp4_min.dev_attr.attr, + + &sensor_dev_attr_temp1_input.dev_attr.attr, + &sensor_dev_attr_temp2_input.dev_attr.attr, + &sensor_dev_attr_temp3_input.dev_attr.attr, + &sensor_dev_attr_temp4_input.dev_attr.attr, + + &sensor_dev_attr_temp1_label.dev_attr.attr, + &sensor_dev_attr_temp2_label.dev_attr.attr, + &sensor_dev_attr_temp3_label.dev_attr.attr, + &sensor_dev_attr_temp4_label.dev_attr.attr, + + &sensor_dev_attr_temp1_alarm.dev_attr.attr, + &sensor_dev_attr_temp2_alarm.dev_attr.attr, + &sensor_dev_attr_temp3_alarm.dev_attr.attr, + &sensor_dev_attr_temp4_alarm.dev_attr.attr, + + &sensor_dev_attr_in1_max.dev_attr.attr, + &sensor_dev_attr_in2_max.dev_attr.attr, + &sensor_dev_attr_in3_max.dev_attr.attr, + &sensor_dev_attr_in4_max.dev_attr.attr, + &sensor_dev_attr_in5_max.dev_attr.attr, + &sensor_dev_attr_in6_max.dev_attr.attr, + &sensor_dev_attr_in7_max.dev_attr.attr, + &sensor_dev_attr_in8_max.dev_attr.attr, + &sensor_dev_attr_in9_max.dev_attr.attr, + &sensor_dev_attr_in10_max.dev_attr.attr, + &sensor_dev_attr_in11_max.dev_attr.attr, + &sensor_dev_attr_in12_max.dev_attr.attr, + &sensor_dev_attr_in13_max.dev_attr.attr, + + &sensor_dev_attr_in1_min.dev_attr.attr, + &sensor_dev_attr_in2_min.dev_attr.attr, + &sensor_dev_attr_in3_min.dev_attr.attr, + &sensor_dev_attr_in4_min.dev_attr.attr, + &sensor_dev_attr_in5_min.dev_attr.attr, + &sensor_dev_attr_in6_min.dev_attr.attr, + &sensor_dev_attr_in7_min.dev_attr.attr, + &sensor_dev_attr_in8_min.dev_attr.attr, + &sensor_dev_attr_in9_min.dev_attr.attr, + &sensor_dev_attr_in10_min.dev_attr.attr, + &sensor_dev_attr_in11_min.dev_attr.attr, + &sensor_dev_attr_in12_min.dev_attr.attr, + &sensor_dev_attr_in13_min.dev_attr.attr, + + &sensor_dev_attr_in1_input.dev_attr.attr, + &sensor_dev_attr_in2_input.dev_attr.attr, + &sensor_dev_attr_in3_input.dev_attr.attr, + &sensor_dev_attr_in4_input.dev_attr.attr, + &sensor_dev_attr_in5_input.dev_attr.attr, + &sensor_dev_attr_in6_input.dev_attr.attr, + &sensor_dev_attr_in7_input.dev_attr.attr, + &sensor_dev_attr_in8_input.dev_attr.attr, + &sensor_dev_attr_in9_input.dev_attr.attr, + &sensor_dev_attr_in10_input.dev_attr.attr, + &sensor_dev_attr_in11_input.dev_attr.attr, + &sensor_dev_attr_in12_input.dev_attr.attr, + &sensor_dev_attr_in13_input.dev_attr.attr, + + &sensor_dev_attr_in1_label.dev_attr.attr, + &sensor_dev_attr_in2_label.dev_attr.attr, + &sensor_dev_attr_in3_label.dev_attr.attr, + &sensor_dev_attr_in4_label.dev_attr.attr, + &sensor_dev_attr_in5_label.dev_attr.attr, + &sensor_dev_attr_in6_label.dev_attr.attr, + &sensor_dev_attr_in7_label.dev_attr.attr, + &sensor_dev_attr_in8_label.dev_attr.attr, + &sensor_dev_attr_in9_label.dev_attr.attr, + &sensor_dev_attr_in10_label.dev_attr.attr, + &sensor_dev_attr_in11_label.dev_attr.attr, + &sensor_dev_attr_in12_label.dev_attr.attr, + &sensor_dev_attr_in13_label.dev_attr.attr, + + &sensor_dev_attr_in1_alarm.dev_attr.attr, + &sensor_dev_attr_in2_alarm.dev_attr.attr, + &sensor_dev_attr_in3_alarm.dev_attr.attr, + &sensor_dev_attr_in4_alarm.dev_attr.attr, + &sensor_dev_attr_in5_alarm.dev_attr.attr, + &sensor_dev_attr_in6_alarm.dev_attr.attr, + &sensor_dev_attr_in7_alarm.dev_attr.attr, + &sensor_dev_attr_in8_alarm.dev_attr.attr, + &sensor_dev_attr_in9_alarm.dev_attr.attr, + &sensor_dev_attr_in10_alarm.dev_attr.attr, + &sensor_dev_attr_in11_alarm.dev_attr.attr, + &sensor_dev_attr_in12_alarm.dev_attr.attr, + &sensor_dev_attr_in13_alarm.dev_attr.attr, + + &sensor_dev_attr_fan1_min.dev_attr.attr, + &sensor_dev_attr_fan2_min.dev_attr.attr, + &sensor_dev_attr_fan3_min.dev_attr.attr, + &sensor_dev_attr_fan4_min.dev_attr.attr, + &sensor_dev_attr_fan5_min.dev_attr.attr, + &sensor_dev_attr_fan6_min.dev_attr.attr, + &sensor_dev_attr_fan7_min.dev_attr.attr, + &sensor_dev_attr_fan8_min.dev_attr.attr, + + &sensor_dev_attr_fan1_input.dev_attr.attr, + &sensor_dev_attr_fan2_input.dev_attr.attr, + &sensor_dev_attr_fan3_input.dev_attr.attr, + &sensor_dev_attr_fan4_input.dev_attr.attr, + &sensor_dev_attr_fan5_input.dev_attr.attr, + &sensor_dev_attr_fan6_input.dev_attr.attr, + &sensor_dev_attr_fan7_input.dev_attr.attr, + &sensor_dev_attr_fan8_input.dev_attr.attr, + + &sensor_dev_attr_fan1_alarm.dev_attr.attr, + &sensor_dev_attr_fan2_alarm.dev_attr.attr, + &sensor_dev_attr_fan3_alarm.dev_attr.attr, + &sensor_dev_attr_fan4_alarm.dev_attr.attr, + &sensor_dev_attr_fan5_alarm.dev_attr.attr, + &sensor_dev_attr_fan6_alarm.dev_attr.attr, + &sensor_dev_attr_fan7_alarm.dev_attr.attr, + &sensor_dev_attr_fan8_alarm.dev_attr.attr, + + &sensor_dev_attr_force_pwm_max.dev_attr.attr, + &sensor_dev_attr_pwm1.dev_attr.attr, + &sensor_dev_attr_pwm2.dev_attr.attr, + &sensor_dev_attr_pwm3.dev_attr.attr, + &sensor_dev_attr_pwm4.dev_attr.attr, + + &sensor_dev_attr_pwm1_auto_point1_pwm.dev_attr.attr, + &sensor_dev_attr_pwm2_auto_point1_pwm.dev_attr.attr, + &sensor_dev_attr_pwm3_auto_point1_pwm.dev_attr.attr, + &sensor_dev_attr_pwm4_auto_point1_pwm.dev_attr.attr, + + &sensor_dev_attr_pwm1_auto_point2_pwm.dev_attr.attr, + &sensor_dev_attr_pwm2_auto_point2_pwm.dev_attr.attr, + &sensor_dev_attr_pwm3_auto_point2_pwm.dev_attr.attr, + &sensor_dev_attr_pwm4_auto_point2_pwm.dev_attr.attr, + + &sensor_dev_attr_temp1_auto_point1_hyst.dev_attr.attr, + &sensor_dev_attr_temp2_auto_point1_hyst.dev_attr.attr, + &sensor_dev_attr_temp3_auto_point1_hyst.dev_attr.attr, + &sensor_dev_attr_temp4_auto_point1_hyst.dev_attr.attr, + + &sensor_dev_attr_temp1_auto_point2_hyst.dev_attr.attr, + &sensor_dev_attr_temp2_auto_point2_hyst.dev_attr.attr, + &sensor_dev_attr_temp3_auto_point2_hyst.dev_attr.attr, + &sensor_dev_attr_temp4_auto_point2_hyst.dev_attr.attr, + + &sensor_dev_attr_temp1_auto_point1_temp.dev_attr.attr, + &sensor_dev_attr_temp2_auto_point1_temp.dev_attr.attr, + &sensor_dev_attr_temp3_auto_point1_temp.dev_attr.attr, + &sensor_dev_attr_temp4_auto_point1_temp.dev_attr.attr, + + &sensor_dev_attr_temp1_auto_point2_temp.dev_attr.attr, + &sensor_dev_attr_temp2_auto_point2_temp.dev_attr.attr, + &sensor_dev_attr_temp3_auto_point2_temp.dev_attr.attr, + &sensor_dev_attr_temp4_auto_point2_temp.dev_attr.attr, + + &sensor_dev_attr_pwm1_enable.dev_attr.attr, + &sensor_dev_attr_pwm2_enable.dev_attr.attr, + &sensor_dev_attr_pwm3_enable.dev_attr.attr, + &sensor_dev_attr_pwm4_enable.dev_attr.attr, + + &sensor_dev_attr_pwm1_auto_channels_temp.dev_attr.attr, + &sensor_dev_attr_pwm2_auto_channels_temp.dev_attr.attr, + &sensor_dev_attr_pwm3_auto_channels_temp.dev_attr.attr, + &sensor_dev_attr_pwm4_auto_channels_temp.dev_attr.attr, + NULL +}; + +/* Return 0 if detection is successful, -ENODEV otherwise */ +static int adt7462_detect(struct i2c_client *client, int kind, + struct i2c_board_info *info) +{ + struct i2c_adapter *adapter = client->adapter; + + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) + return -ENODEV; + + if (kind <= 0) { + int vendor, device, revision; + + vendor = i2c_smbus_read_byte_data(client, ADT7462_REG_VENDOR); + if (vendor != ADT7462_VENDOR) + return -ENODEV; + + device = i2c_smbus_read_byte_data(client, ADT7462_REG_DEVICE); + if (device != ADT7462_DEVICE) + return -ENODEV; + + revision = i2c_smbus_read_byte_data(client, + ADT7462_REG_REVISION); + if (revision != ADT7462_REVISION) + return -ENODEV; + } else + dev_dbg(&adapter->dev, "detection forced\n"); + + strlcpy(info->type, "adt7462", I2C_NAME_SIZE); + + return 0; +} + +static int adt7462_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct adt7462_data *data; + int err; + + data = kzalloc(sizeof(struct adt7462_data), GFP_KERNEL); + if (!data) { + err = -ENOMEM; + goto exit; + } + + i2c_set_clientdata(client, data); + mutex_init(&data->lock); + + dev_info(&client->dev, "%s chip found\n", client->name); + + /* Register sysfs hooks */ + data->attrs.attrs = adt7462_attr; + err = sysfs_create_group(&client->dev.kobj, &data->attrs); + if (err) + goto exit_free; + + data->hwmon_dev = hwmon_device_register(&client->dev); + if (IS_ERR(data->hwmon_dev)) { + err = PTR_ERR(data->hwmon_dev); + goto exit_remove; + } + + return 0; + +exit_remove: + sysfs_remove_group(&client->dev.kobj, &data->attrs); +exit_free: + kfree(data); +exit: + return err; +} + +static int adt7462_remove(struct i2c_client *client) +{ + struct adt7462_data *data = i2c_get_clientdata(client); + + hwmon_device_unregister(data->hwmon_dev); + sysfs_remove_group(&client->dev.kobj, &data->attrs); + kfree(data); + return 0; +} + +static int __init adt7462_init(void) +{ + return i2c_add_driver(&adt7462_driver); +} + +static void __exit adt7462_exit(void) +{ + i2c_del_driver(&adt7462_driver); +} + +MODULE_AUTHOR("Darrick J. Wong <djwong@us.ibm.com>"); +MODULE_DESCRIPTION("ADT7462 driver"); +MODULE_LICENSE("GPL"); + +module_init(adt7462_init); +module_exit(adt7462_exit); diff --git a/drivers/hwmon/adt7470.c b/drivers/hwmon/adt7470.c index d368d8f845e..1311a595147 100644 --- a/drivers/hwmon/adt7470.c +++ b/drivers/hwmon/adt7470.c @@ -137,6 +137,8 @@ I2C_CLIENT_INSMOD_1(adt7470); #define FAN_PERIOD_INVALID 65535 #define FAN_DATA_VALID(x) ((x) && (x) != FAN_PERIOD_INVALID) +#define ROUND_DIV(x, divisor) (((x) + ((divisor) / 2)) / (divisor)) + struct adt7470_data { struct device *hwmon_dev; struct attribute_group attrs; @@ -353,7 +355,13 @@ static ssize_t set_temp_min(struct device *dev, struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct i2c_client *client = to_i2c_client(dev); struct adt7470_data *data = i2c_get_clientdata(client); - int temp = simple_strtol(buf, NULL, 10) / 1000; + long temp; + + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; + + temp = ROUND_DIV(temp, 1000); + temp = SENSORS_LIMIT(temp, 0, 255); mutex_lock(&data->lock); data->temp_min[attr->index] = temp; @@ -381,7 +389,13 @@ static ssize_t set_temp_max(struct device *dev, struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct i2c_client *client = to_i2c_client(dev); struct adt7470_data *data = i2c_get_clientdata(client); - int temp = simple_strtol(buf, NULL, 10) / 1000; + long temp; + + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; + + temp = ROUND_DIV(temp, 1000); + temp = SENSORS_LIMIT(temp, 0, 255); mutex_lock(&data->lock); data->temp_max[attr->index] = temp; @@ -430,11 +444,13 @@ static ssize_t set_fan_max(struct device *dev, struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct i2c_client *client = to_i2c_client(dev); struct adt7470_data *data = i2c_get_clientdata(client); - int temp = simple_strtol(buf, NULL, 10); + long temp; - if (!temp) + if (strict_strtol(buf, 10, &temp) || !temp) return -EINVAL; + temp = FAN_RPM_TO_PERIOD(temp); + temp = SENSORS_LIMIT(temp, 1, 65534); mutex_lock(&data->lock); data->fan_max[attr->index] = temp; @@ -465,11 +481,13 @@ static ssize_t set_fan_min(struct device *dev, struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct i2c_client *client = to_i2c_client(dev); struct adt7470_data *data = i2c_get_clientdata(client); - int temp = simple_strtol(buf, NULL, 10); + long temp; - if (!temp) + if (strict_strtol(buf, 10, &temp) || !temp) return -EINVAL; + temp = FAN_RPM_TO_PERIOD(temp); + temp = SENSORS_LIMIT(temp, 1, 65534); mutex_lock(&data->lock); data->fan_min[attr->index] = temp; @@ -507,9 +525,12 @@ static ssize_t set_force_pwm_max(struct device *dev, { struct i2c_client *client = to_i2c_client(dev); struct adt7470_data *data = i2c_get_clientdata(client); - int temp = simple_strtol(buf, NULL, 10); + long temp; u8 reg; + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; + mutex_lock(&data->lock); data->force_pwm_max = temp; reg = i2c_smbus_read_byte_data(client, ADT7470_REG_CFG); @@ -537,7 +558,12 @@ static ssize_t set_pwm(struct device *dev, struct device_attribute *devattr, struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct i2c_client *client = to_i2c_client(dev); struct adt7470_data *data = i2c_get_clientdata(client); - int temp = simple_strtol(buf, NULL, 10); + long temp; + + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; + + temp = SENSORS_LIMIT(temp, 0, 255); mutex_lock(&data->lock); data->pwm[attr->index] = temp; @@ -564,7 +590,12 @@ static ssize_t set_pwm_max(struct device *dev, struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct i2c_client *client = to_i2c_client(dev); struct adt7470_data *data = i2c_get_clientdata(client); - int temp = simple_strtol(buf, NULL, 10); + long temp; + + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; + + temp = SENSORS_LIMIT(temp, 0, 255); mutex_lock(&data->lock); data->pwm_max[attr->index] = temp; @@ -592,7 +623,12 @@ static ssize_t set_pwm_min(struct device *dev, struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct i2c_client *client = to_i2c_client(dev); struct adt7470_data *data = i2c_get_clientdata(client); - int temp = simple_strtol(buf, NULL, 10); + long temp; + + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; + + temp = SENSORS_LIMIT(temp, 0, 255); mutex_lock(&data->lock); data->pwm_min[attr->index] = temp; @@ -630,7 +666,13 @@ static ssize_t set_pwm_tmin(struct device *dev, struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct i2c_client *client = to_i2c_client(dev); struct adt7470_data *data = i2c_get_clientdata(client); - int temp = simple_strtol(buf, NULL, 10) / 1000; + long temp; + + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; + + temp = ROUND_DIV(temp, 1000); + temp = SENSORS_LIMIT(temp, 0, 255); mutex_lock(&data->lock); data->pwm_tmin[attr->index] = temp; @@ -658,11 +700,14 @@ static ssize_t set_pwm_auto(struct device *dev, struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct i2c_client *client = to_i2c_client(dev); struct adt7470_data *data = i2c_get_clientdata(client); - int temp = simple_strtol(buf, NULL, 10); int pwm_auto_reg = ADT7470_REG_PWM_CFG(attr->index); int pwm_auto_reg_mask; + long temp; u8 reg; + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; + if (attr->index % 2) pwm_auto_reg_mask = ADT7470_PWM2_AUTO_MASK; else @@ -716,10 +761,14 @@ static ssize_t set_pwm_auto_temp(struct device *dev, struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct i2c_client *client = to_i2c_client(dev); struct adt7470_data *data = i2c_get_clientdata(client); - int temp = cvt_auto_temp(simple_strtol(buf, NULL, 10)); int pwm_auto_reg = ADT7470_REG_PWM_AUTO_TEMP(attr->index); + long temp; u8 reg; + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; + + temp = cvt_auto_temp(temp); if (temp < 0) return temp; diff --git a/drivers/hwmon/adt7473.c b/drivers/hwmon/adt7473.c index b9a8ea30c99..18aa30866a6 100644 --- a/drivers/hwmon/adt7473.c +++ b/drivers/hwmon/adt7473.c @@ -129,6 +129,8 @@ I2C_CLIENT_INSMOD_1(adt7473); #define FAN_PERIOD_INVALID 65535 #define FAN_DATA_VALID(x) ((x) && (x) != FAN_PERIOD_INVALID) +#define ROUND_DIV(x, divisor) (((x) + ((divisor) / 2)) / (divisor)) + struct adt7473_data { struct device *hwmon_dev; struct attribute_group attrs; @@ -357,7 +359,12 @@ static ssize_t set_volt_min(struct device *dev, struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct i2c_client *client = to_i2c_client(dev); struct adt7473_data *data = i2c_get_clientdata(client); - int volt = encode_volt(attr->index, simple_strtol(buf, NULL, 10)); + long volt; + + if (strict_strtol(buf, 10, &volt)) + return -EINVAL; + + volt = encode_volt(attr->index, volt); mutex_lock(&data->lock); data->volt_min[attr->index] = volt; @@ -386,7 +393,12 @@ static ssize_t set_volt_max(struct device *dev, struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct i2c_client *client = to_i2c_client(dev); struct adt7473_data *data = i2c_get_clientdata(client); - int volt = encode_volt(attr->index, simple_strtol(buf, NULL, 10)); + long volt; + + if (strict_strtol(buf, 10, &volt)) + return -EINVAL; + + volt = encode_volt(attr->index, volt); mutex_lock(&data->lock); data->volt_max[attr->index] = volt; @@ -419,7 +431,8 @@ static int decode_temp(u8 twos_complement, u8 raw) static u8 encode_temp(u8 twos_complement, int cooked) { - return twos_complement ? cooked & 0xFF : cooked + 64; + u8 ret = twos_complement ? cooked & 0xFF : cooked + 64; + return SENSORS_LIMIT(ret, 0, 255); } static ssize_t show_temp_min(struct device *dev, @@ -441,7 +454,12 @@ static ssize_t set_temp_min(struct device *dev, struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct i2c_client *client = to_i2c_client(dev); struct adt7473_data *data = i2c_get_clientdata(client); - int temp = simple_strtol(buf, NULL, 10) / 1000; + long temp; + + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; + + temp = ROUND_DIV(temp, 1000); temp = encode_temp(data->temp_twos_complement, temp); mutex_lock(&data->lock); @@ -472,7 +490,12 @@ static ssize_t set_temp_max(struct device *dev, struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct i2c_client *client = to_i2c_client(dev); struct adt7473_data *data = i2c_get_clientdata(client); - int temp = simple_strtol(buf, NULL, 10) / 1000; + long temp; + + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; + + temp = ROUND_DIV(temp, 1000); temp = encode_temp(data->temp_twos_complement, temp); mutex_lock(&data->lock); @@ -515,11 +538,13 @@ static ssize_t set_fan_min(struct device *dev, struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct i2c_client *client = to_i2c_client(dev); struct adt7473_data *data = i2c_get_clientdata(client); - int temp = simple_strtol(buf, NULL, 10); + long temp; - if (!temp) + if (strict_strtol(buf, 10, &temp) || !temp) return -EINVAL; + temp = FAN_RPM_TO_PERIOD(temp); + temp = SENSORS_LIMIT(temp, 1, 65534); mutex_lock(&data->lock); data->fan_min[attr->index] = temp; @@ -558,7 +583,10 @@ static ssize_t set_max_duty_at_crit(struct device *dev, u8 reg; struct i2c_client *client = to_i2c_client(dev); struct adt7473_data *data = i2c_get_clientdata(client); - int temp = simple_strtol(buf, NULL, 10); + long temp; + + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; mutex_lock(&data->lock); data->max_duty_at_overheat = !!temp; @@ -587,7 +615,12 @@ static ssize_t set_pwm(struct device *dev, struct device_attribute *devattr, struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct i2c_client *client = to_i2c_client(dev); struct adt7473_data *data = i2c_get_clientdata(client); - int temp = simple_strtol(buf, NULL, 10); + long temp; + + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; + + temp = SENSORS_LIMIT(temp, 0, 255); mutex_lock(&data->lock); data->pwm[attr->index] = temp; @@ -614,7 +647,12 @@ static ssize_t set_pwm_max(struct device *dev, struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct i2c_client *client = to_i2c_client(dev); struct adt7473_data *data = i2c_get_clientdata(client); - int temp = simple_strtol(buf, NULL, 10); + long temp; + + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; + + temp = SENSORS_LIMIT(temp, 0, 255); mutex_lock(&data->lock); data->pwm_max[attr->index] = temp; @@ -642,7 +680,12 @@ static ssize_t set_pwm_min(struct device *dev, struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct i2c_client *client = to_i2c_client(dev); struct adt7473_data *data = i2c_get_clientdata(client); - int temp = simple_strtol(buf, NULL, 10); + long temp; + + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; + + temp = SENSORS_LIMIT(temp, 0, 255); mutex_lock(&data->lock); data->pwm_min[attr->index] = temp; @@ -672,7 +715,12 @@ static ssize_t set_temp_tmax(struct device *dev, struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct i2c_client *client = to_i2c_client(dev); struct adt7473_data *data = i2c_get_clientdata(client); - int temp = simple_strtol(buf, NULL, 10) / 1000; + long temp; + + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; + + temp = ROUND_DIV(temp, 1000); temp = encode_temp(data->temp_twos_complement, temp); mutex_lock(&data->lock); @@ -703,7 +751,12 @@ static ssize_t set_temp_tmin(struct device *dev, struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct i2c_client *client = to_i2c_client(dev); struct adt7473_data *data = i2c_get_clientdata(client); - int temp = simple_strtol(buf, NULL, 10) / 1000; + long temp; + + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; + + temp = ROUND_DIV(temp, 1000); temp = encode_temp(data->temp_twos_complement, temp); mutex_lock(&data->lock); @@ -741,7 +794,10 @@ static ssize_t set_pwm_enable(struct device *dev, struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct i2c_client *client = to_i2c_client(dev); struct adt7473_data *data = i2c_get_clientdata(client); - int temp = simple_strtol(buf, NULL, 10); + long temp; + + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; switch (temp) { case 0: @@ -805,7 +861,10 @@ static ssize_t set_pwm_auto_temp(struct device *dev, struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct i2c_client *client = to_i2c_client(dev); struct adt7473_data *data = i2c_get_clientdata(client); - int temp = simple_strtol(buf, NULL, 10); + long temp; + + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; switch (temp) { case 1: diff --git a/drivers/hwmon/applesmc.c b/drivers/hwmon/applesmc.c index be3285912cb..488e45cd43d 100644 --- a/drivers/hwmon/applesmc.c +++ b/drivers/hwmon/applesmc.c @@ -1280,7 +1280,7 @@ static __initdata struct dmi_match_data applesmc_dmi_data[] = { { .accelerometer = 0, .light = 0, .temperature_set = 4 }, /* iMac: temperature set 5 */ { .accelerometer = 0, .light = 0, .temperature_set = 5 }, -/* MacBook3: accelerometer and temperature set 6 */ +/* MacBook3, MacBook4: accelerometer and temperature set 6 */ { .accelerometer = 1, .light = 0, .temperature_set = 6 }, /* MacBook Air: accelerometer, backlight and temperature set 7 */ { .accelerometer = 1, .light = 1, .temperature_set = 7 }, @@ -1329,6 +1329,10 @@ static __initdata struct dmi_system_id applesmc_whitelist[] = { DMI_MATCH(DMI_BOARD_VENDOR,"Apple"), DMI_MATCH(DMI_PRODUCT_NAME,"MacBook3") }, &applesmc_dmi_data[6]}, + { applesmc_dmi_match, "Apple MacBook 4", { + DMI_MATCH(DMI_BOARD_VENDOR, "Apple"), + DMI_MATCH(DMI_PRODUCT_NAME, "MacBook4") }, + &applesmc_dmi_data[6]}, { applesmc_dmi_match, "Apple MacBook 5", { DMI_MATCH(DMI_BOARD_VENDOR, "Apple"), DMI_MATCH(DMI_PRODUCT_NAME, "MacBook5") }, diff --git a/drivers/hwmon/ibmaem.c b/drivers/hwmon/ibmaem.c index 7b0ed5dea39..fe74609a7fe 100644 --- a/drivers/hwmon/ibmaem.c +++ b/drivers/hwmon/ibmaem.c @@ -88,9 +88,11 @@ static DEFINE_IDR(aem_idr); static DEFINE_SPINLOCK(aem_idr_lock); -static struct device_driver aem_driver = { - .name = DRVNAME, - .bus = &platform_bus_type, +static struct platform_driver aem_driver = { + .driver = { + .name = DRVNAME, + .bus = &platform_bus_type, + } }; struct aem_ipmi_data { @@ -583,7 +585,7 @@ static int aem_init_aem1_inst(struct aem_ipmi_data *probe, u8 module_handle) data->pdev = platform_device_alloc(DRVNAME, data->id); if (!data->pdev) goto dev_err; - data->pdev->dev.driver = &aem_driver; + data->pdev->dev.driver = &aem_driver.driver; res = platform_device_add(data->pdev); if (res) @@ -716,7 +718,7 @@ static int aem_init_aem2_inst(struct aem_ipmi_data *probe, data->pdev = platform_device_alloc(DRVNAME, data->id); if (!data->pdev) goto dev_err; - data->pdev->dev.driver = &aem_driver; + data->pdev->dev.driver = &aem_driver.driver; res = platform_device_add(data->pdev); if (res) @@ -1085,7 +1087,7 @@ static int __init aem_init(void) { int res; - res = driver_register(&aem_driver); + res = driver_register(&aem_driver.driver); if (res) { printk(KERN_ERR "Can't register aem driver\n"); return res; @@ -1097,7 +1099,7 @@ static int __init aem_init(void) return 0; ipmi_reg_err: - driver_unregister(&aem_driver); + driver_unregister(&aem_driver.driver); return res; } @@ -1107,7 +1109,7 @@ static void __exit aem_exit(void) struct aem_data *p1, *next1; ipmi_smi_watcher_unregister(&driver_data.bmc_events); - driver_unregister(&aem_driver); + driver_unregister(&aem_driver.driver); list_for_each_entry_safe(p1, next1, &driver_data.aem_devices, list) aem_delete(p1); } diff --git a/drivers/hwmon/lis3lv02d.c b/drivers/hwmon/lis3lv02d.c new file mode 100644 index 00000000000..c002144c76b --- /dev/null +++ b/drivers/hwmon/lis3lv02d.c @@ -0,0 +1,581 @@ +/* + * lis3lv02d.c - ST LIS3LV02DL accelerometer driver + * + * Copyright (C) 2007-2008 Yan Burman + * Copyright (C) 2008 Eric Piel + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/dmi.h> +#include <linux/module.h> +#include <linux/types.h> +#include <linux/platform_device.h> +#include <linux/interrupt.h> +#include <linux/input.h> +#include <linux/kthread.h> +#include <linux/semaphore.h> +#include <linux/delay.h> +#include <linux/wait.h> +#include <linux/poll.h> +#include <linux/freezer.h> +#include <linux/uaccess.h> +#include <acpi/acpi_drivers.h> +#include <asm/atomic.h> +#include "lis3lv02d.h" + +#define DRIVER_NAME "lis3lv02d" +#define ACPI_MDPS_CLASS "accelerometer" + +/* joystick device poll interval in milliseconds */ +#define MDPS_POLL_INTERVAL 50 +/* + * The sensor can also generate interrupts (DRDY) but it's pretty pointless + * because their are generated even if the data do not change. So it's better + * to keep the interrupt for the free-fall event. The values are updated at + * 40Hz (at the lowest frequency), but as it can be pretty time consuming on + * some low processor, we poll the sensor only at 20Hz... enough for the + * joystick. + */ + +/* Maximum value our axis may get for the input device (signed 12 bits) */ +#define MDPS_MAX_VAL 2048 + +struct axis_conversion { + s8 x; + s8 y; + s8 z; +}; + +struct acpi_lis3lv02d { + struct acpi_device *device; /* The ACPI device */ + struct input_dev *idev; /* input device */ + struct task_struct *kthread; /* kthread for input */ + struct mutex lock; + struct platform_device *pdev; /* platform device */ + atomic_t count; /* interrupt count after last read */ + int xcalib; /* calibrated null value for x */ + int ycalib; /* calibrated null value for y */ + int zcalib; /* calibrated null value for z */ + unsigned char is_on; /* whether the device is on or off */ + unsigned char usage; /* usage counter */ + struct axis_conversion ac; /* hw -> logical axis */ +}; + +static struct acpi_lis3lv02d adev; + +static int lis3lv02d_remove_fs(void); +static int lis3lv02d_add_fs(struct acpi_device *device); + +/* For automatic insertion of the module */ +static struct acpi_device_id lis3lv02d_device_ids[] = { + {"HPQ0004", 0}, /* HP Mobile Data Protection System PNP */ + {"", 0}, +}; +MODULE_DEVICE_TABLE(acpi, lis3lv02d_device_ids); + +/** + * lis3lv02d_acpi_init - ACPI _INI method: initialize the device. + * @handle: the handle of the device + * + * Returns AE_OK on success. + */ +static inline acpi_status lis3lv02d_acpi_init(acpi_handle handle) +{ + return acpi_evaluate_object(handle, METHOD_NAME__INI, NULL, NULL); +} + +/** + * lis3lv02d_acpi_read - ACPI ALRD method: read a register + * @handle: the handle of the device + * @reg: the register to read + * @ret: result of the operation + * + * Returns AE_OK on success. + */ +static acpi_status lis3lv02d_acpi_read(acpi_handle handle, int reg, u8 *ret) +{ + union acpi_object arg0 = { ACPI_TYPE_INTEGER }; + struct acpi_object_list args = { 1, &arg0 }; + unsigned long long lret; + acpi_status status; + + arg0.integer.value = reg; + + status = acpi_evaluate_integer(handle, "ALRD", &args, &lret); + *ret = lret; + return status; +} + +/** + * lis3lv02d_acpi_write - ACPI ALWR method: write to a register + * @handle: the handle of the device + * @reg: the register to write to + * @val: the value to write + * + * Returns AE_OK on success. + */ +static acpi_status lis3lv02d_acpi_write(acpi_handle handle, int reg, u8 val) +{ + unsigned long long ret; /* Not used when writting */ + union acpi_object in_obj[2]; + struct acpi_object_list args = { 2, in_obj }; + + in_obj[0].type = ACPI_TYPE_INTEGER; + in_obj[0].integer.value = reg; + in_obj[1].type = ACPI_TYPE_INTEGER; + in_obj[1].integer.value = val; + + return acpi_evaluate_integer(handle, "ALWR", &args, &ret); +} + +static s16 lis3lv02d_read_16(acpi_handle handle, int reg) +{ + u8 lo, hi; + + lis3lv02d_acpi_read(handle, reg, &lo); + lis3lv02d_acpi_read(handle, reg + 1, &hi); + /* In "12 bit right justified" mode, bit 6, bit 7, bit 8 = bit 5 */ + return (s16)((hi << 8) | lo); +} + +/** + * lis3lv02d_get_axis - For the given axis, give the value converted + * @axis: 1,2,3 - can also be negative + * @hw_values: raw values returned by the hardware + * + * Returns the converted value. + */ +static inline int lis3lv02d_get_axis(s8 axis, int hw_values[3]) +{ + if (axis > 0) + return hw_values[axis - 1]; + else + return -hw_values[-axis - 1]; +} + +/** + * lis3lv02d_get_xyz - Get X, Y and Z axis values from the accelerometer + * @handle: the handle to the device + * @x: where to store the X axis value + * @y: where to store the Y axis value + * @z: where to store the Z axis value + * + * Note that 40Hz input device can eat up about 10% CPU at 800MHZ + */ +static void lis3lv02d_get_xyz(acpi_handle handle, int *x, int *y, int *z) +{ + int position[3]; + + position[0] = lis3lv02d_read_16(handle, OUTX_L); + position[1] = lis3lv02d_read_16(handle, OUTY_L); + position[2] = lis3lv02d_read_16(handle, OUTZ_L); + + *x = lis3lv02d_get_axis(adev.ac.x, position); + *y = lis3lv02d_get_axis(adev.ac.y, position); + *z = lis3lv02d_get_axis(adev.ac.z, position); +} + +static inline void lis3lv02d_poweroff(acpi_handle handle) +{ + adev.is_on = 0; + /* disable X,Y,Z axis and power down */ + lis3lv02d_acpi_write(handle, CTRL_REG1, 0x00); +} + +static void lis3lv02d_poweron(acpi_handle handle) +{ + u8 val; + + adev.is_on = 1; + lis3lv02d_acpi_init(handle); + lis3lv02d_acpi_write(handle, FF_WU_CFG, 0); + /* + * BDU: LSB and MSB values are not updated until both have been read. + * So the value read will always be correct. + * IEN: Interrupt for free-fall and DD, not for data-ready. + */ + lis3lv02d_acpi_read(handle, CTRL_REG2, &val); + val |= CTRL2_BDU | CTRL2_IEN; + lis3lv02d_acpi_write(handle, CTRL_REG2, val); +} + +#ifdef CONFIG_PM +static int lis3lv02d_suspend(struct acpi_device *device, pm_message_t state) +{ + /* make sure the device is off when we suspend */ + lis3lv02d_poweroff(device->handle); + return 0; +} + +static int lis3lv02d_resume(struct acpi_device *device) +{ + /* put back the device in the right state (ACPI might turn it on) */ + mutex_lock(&adev.lock); + if (adev.usage > 0) + lis3lv02d_poweron(device->handle); + else + lis3lv02d_poweroff(device->handle); + mutex_unlock(&adev.lock); + return 0; +} +#else +#define lis3lv02d_suspend NULL +#define lis3lv02d_resume NULL +#endif + + +/* + * To be called before starting to use the device. It makes sure that the + * device will always be on until a call to lis3lv02d_decrease_use(). Not to be + * used from interrupt context. + */ +static void lis3lv02d_increase_use(struct acpi_lis3lv02d *dev) +{ + mutex_lock(&dev->lock); + dev->usage++; + if (dev->usage == 1) { + if (!dev->is_on) + lis3lv02d_poweron(dev->device->handle); + } + mutex_unlock(&dev->lock); +} + +/* + * To be called whenever a usage of the device is stopped. + * It will make sure to turn off the device when there is not usage. + */ +static void lis3lv02d_decrease_use(struct acpi_lis3lv02d *dev) +{ + mutex_lock(&dev->lock); + dev->usage--; + if (dev->usage == 0) + lis3lv02d_poweroff(dev->device->handle); + mutex_unlock(&dev->lock); +} + +/** + * lis3lv02d_joystick_kthread - Kthread polling function + * @data: unused - here to conform to threadfn prototype + */ +static int lis3lv02d_joystick_kthread(void *data) +{ + int x, y, z; + + while (!kthread_should_stop()) { + lis3lv02d_get_xyz(adev.device->handle, &x, &y, &z); + input_report_abs(adev.idev, ABS_X, x - adev.xcalib); + input_report_abs(adev.idev, ABS_Y, y - adev.ycalib); + input_report_abs(adev.idev, ABS_Z, z - adev.zcalib); + + input_sync(adev.idev); + + try_to_freeze(); + msleep_interruptible(MDPS_POLL_INTERVAL); + } + + return 0; +} + +static int lis3lv02d_joystick_open(struct input_dev *input) +{ + lis3lv02d_increase_use(&adev); + adev.kthread = kthread_run(lis3lv02d_joystick_kthread, NULL, "klis3lv02d"); + if (IS_ERR(adev.kthread)) { + lis3lv02d_decrease_use(&adev); + return PTR_ERR(adev.kthread); + } + + return 0; +} + +static void lis3lv02d_joystick_close(struct input_dev *input) +{ + kthread_stop(adev.kthread); + lis3lv02d_decrease_use(&adev); +} + + +static inline void lis3lv02d_calibrate_joystick(void) +{ + lis3lv02d_get_xyz(adev.device->handle, &adev.xcalib, &adev.ycalib, &adev.zcalib); +} + +static int lis3lv02d_joystick_enable(void) +{ + int err; + + if (adev.idev) + return -EINVAL; + + adev.idev = input_allocate_device(); + if (!adev.idev) + return -ENOMEM; + + lis3lv02d_calibrate_joystick(); + + adev.idev->name = "ST LIS3LV02DL Accelerometer"; + adev.idev->phys = DRIVER_NAME "/input0"; + adev.idev->id.bustype = BUS_HOST; + adev.idev->id.vendor = 0; + adev.idev->dev.parent = &adev.pdev->dev; + adev.idev->open = lis3lv02d_joystick_open; + adev.idev->close = lis3lv02d_joystick_close; + + set_bit(EV_ABS, adev.idev->evbit); + input_set_abs_params(adev.idev, ABS_X, -MDPS_MAX_VAL, MDPS_MAX_VAL, 3, 3); + input_set_abs_params(adev.idev, ABS_Y, -MDPS_MAX_VAL, MDPS_MAX_VAL, 3, 3); + input_set_abs_params(adev.idev, ABS_Z, -MDPS_MAX_VAL, MDPS_MAX_VAL, 3, 3); + + err = input_register_device(adev.idev); + if (err) { + input_free_device(adev.idev); + adev.idev = NULL; + } + + return err; +} + +static void lis3lv02d_joystick_disable(void) +{ + if (!adev.idev) + return; + + input_unregister_device(adev.idev); + adev.idev = NULL; +} + + +/* + * Initialise the accelerometer and the various subsystems. + * Should be rather independant of the bus system. + */ +static int lis3lv02d_init_device(struct acpi_lis3lv02d *dev) +{ + mutex_init(&dev->lock); + lis3lv02d_add_fs(dev->device); + lis3lv02d_increase_use(dev); + + if (lis3lv02d_joystick_enable()) + printk(KERN_ERR DRIVER_NAME ": joystick initialization failed\n"); + + lis3lv02d_decrease_use(dev); + return 0; +} + +static int lis3lv02d_dmi_matched(const struct dmi_system_id *dmi) +{ + adev.ac = *((struct axis_conversion *)dmi->driver_data); + printk(KERN_INFO DRIVER_NAME ": hardware type %s found.\n", dmi->ident); + + return 1; +} + +/* Represents, for each axis seen by userspace, the corresponding hw axis (+1). + * If the value is negative, the opposite of the hw value is used. */ +static struct axis_conversion lis3lv02d_axis_normal = {1, 2, 3}; +static struct axis_conversion lis3lv02d_axis_y_inverted = {1, -2, 3}; +static struct axis_conversion lis3lv02d_axis_x_inverted = {-1, 2, 3}; +static struct axis_conversion lis3lv02d_axis_z_inverted = {1, 2, -3}; +static struct axis_conversion lis3lv02d_axis_xy_rotated_left = {-2, 1, 3}; +static struct axis_conversion lis3lv02d_axis_xy_swap_inverted = {-2, -1, 3}; + +#define AXIS_DMI_MATCH(_ident, _name, _axis) { \ + .ident = _ident, \ + .callback = lis3lv02d_dmi_matched, \ + .matches = { \ + DMI_MATCH(DMI_PRODUCT_NAME, _name) \ + }, \ + .driver_data = &lis3lv02d_axis_##_axis \ +} +static struct dmi_system_id lis3lv02d_dmi_ids[] = { + /* product names are truncated to match all kinds of a same model */ + AXIS_DMI_MATCH("NC64x0", "HP Compaq nc64", x_inverted), + AXIS_DMI_MATCH("NC84x0", "HP Compaq nc84", z_inverted), + AXIS_DMI_MATCH("NX9420", "HP Compaq nx9420", x_inverted), + AXIS_DMI_MATCH("NW9440", "HP Compaq nw9440", x_inverted), + AXIS_DMI_MATCH("NC2510", "HP Compaq 2510", y_inverted), + AXIS_DMI_MATCH("NC8510", "HP Compaq 8510", xy_swap_inverted), + AXIS_DMI_MATCH("HP2133", "HP 2133", xy_rotated_left), + { NULL, } +/* Laptop models without axis info (yet): + * "NC651xx" "HP Compaq 651" + * "NC671xx" "HP Compaq 671" + * "NC6910" "HP Compaq 6910" + * HP Compaq 8710x Notebook PC / Mobile Workstation + * "NC2400" "HP Compaq nc2400" + * "NX74x0" "HP Compaq nx74" + * "NX6325" "HP Compaq nx6325" + * "NC4400" "HP Compaq nc4400" + */ +}; + +static int lis3lv02d_add(struct acpi_device *device) +{ + u8 val; + + if (!device) + return -EINVAL; + + adev.device = device; + strcpy(acpi_device_name(device), DRIVER_NAME); + strcpy(acpi_device_class(device), ACPI_MDPS_CLASS); + device->driver_data = &adev; + + lis3lv02d_acpi_read(device->handle, WHO_AM_I, &val); + if ((val != LIS3LV02DL_ID) && (val != LIS302DL_ID)) { + printk(KERN_ERR DRIVER_NAME + ": Accelerometer chip not LIS3LV02D{L,Q}\n"); + } + + /* If possible use a "standard" axes order */ + if (dmi_check_system(lis3lv02d_dmi_ids) == 0) { + printk(KERN_INFO DRIVER_NAME ": laptop model unknown, " + "using default axes configuration\n"); + adev.ac = lis3lv02d_axis_normal; + } + + return lis3lv02d_init_device(&adev); +} + +static int lis3lv02d_remove(struct acpi_device *device, int type) +{ + if (!device) + return -EINVAL; + + lis3lv02d_joystick_disable(); + lis3lv02d_poweroff(device->handle); + + return lis3lv02d_remove_fs(); +} + + +/* Sysfs stuff */ +static ssize_t lis3lv02d_position_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + int x, y, z; + + lis3lv02d_increase_use(&adev); + lis3lv02d_get_xyz(adev.device->handle, &x, &y, &z); + lis3lv02d_decrease_use(&adev); + return sprintf(buf, "(%d,%d,%d)\n", x, y, z); +} + +static ssize_t lis3lv02d_calibrate_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return sprintf(buf, "(%d,%d,%d)\n", adev.xcalib, adev.ycalib, adev.zcalib); +} + +static ssize_t lis3lv02d_calibrate_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + lis3lv02d_increase_use(&adev); + lis3lv02d_calibrate_joystick(); + lis3lv02d_decrease_use(&adev); + return count; +} + +/* conversion btw sampling rate and the register values */ +static int lis3lv02dl_df_val[4] = {40, 160, 640, 2560}; +static ssize_t lis3lv02d_rate_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + u8 ctrl; + int val; + + lis3lv02d_increase_use(&adev); + lis3lv02d_acpi_read(adev.device->handle, CTRL_REG1, &ctrl); + lis3lv02d_decrease_use(&adev); + val = (ctrl & (CTRL1_DF0 | CTRL1_DF1)) >> 4; + return sprintf(buf, "%d\n", lis3lv02dl_df_val[val]); +} + +static DEVICE_ATTR(position, S_IRUGO, lis3lv02d_position_show, NULL); +static DEVICE_ATTR(calibrate, S_IRUGO|S_IWUSR, lis3lv02d_calibrate_show, + lis3lv02d_calibrate_store); +static DEVICE_ATTR(rate, S_IRUGO, lis3lv02d_rate_show, NULL); + +static struct attribute *lis3lv02d_attributes[] = { + &dev_attr_position.attr, + &dev_attr_calibrate.attr, + &dev_attr_rate.attr, + NULL +}; + +static struct attribute_group lis3lv02d_attribute_group = { + .attrs = lis3lv02d_attributes +}; + +static int lis3lv02d_add_fs(struct acpi_device *device) +{ + adev.pdev = platform_device_register_simple(DRIVER_NAME, -1, NULL, 0); + if (IS_ERR(adev.pdev)) + return PTR_ERR(adev.pdev); + + return sysfs_create_group(&adev.pdev->dev.kobj, &lis3lv02d_attribute_group); +} + +static int lis3lv02d_remove_fs(void) +{ + sysfs_remove_group(&adev.pdev->dev.kobj, &lis3lv02d_attribute_group); + platform_device_unregister(adev.pdev); + return 0; +} + +/* For the HP MDPS aka 3D Driveguard */ +static struct acpi_driver lis3lv02d_driver = { + .name = DRIVER_NAME, + .class = ACPI_MDPS_CLASS, + .ids = lis3lv02d_device_ids, + .ops = { + .add = lis3lv02d_add, + .remove = lis3lv02d_remove, + .suspend = lis3lv02d_suspend, + .resume = lis3lv02d_resume, + } +}; + +static int __init lis3lv02d_init_module(void) +{ + int ret; + + if (acpi_disabled) + return -ENODEV; + + ret = acpi_bus_register_driver(&lis3lv02d_driver); + if (ret < 0) + return ret; + + printk(KERN_INFO DRIVER_NAME " driver loaded.\n"); + + return 0; +} + +static void __exit lis3lv02d_exit_module(void) +{ + acpi_bus_unregister_driver(&lis3lv02d_driver); +} + +MODULE_DESCRIPTION("ST LIS3LV02Dx three-axis digital accelerometer driver"); +MODULE_AUTHOR("Yan Burman and Eric Piel"); +MODULE_LICENSE("GPL"); + +module_init(lis3lv02d_init_module); +module_exit(lis3lv02d_exit_module); diff --git a/drivers/hwmon/lis3lv02d.h b/drivers/hwmon/lis3lv02d.h new file mode 100644 index 00000000000..330cfc60e94 --- /dev/null +++ b/drivers/hwmon/lis3lv02d.h @@ -0,0 +1,149 @@ +/* + * lis3lv02d.h - ST LIS3LV02DL accelerometer driver + * + * Copyright (C) 2007-2008 Yan Burman + * Copyright (C) 2008 Eric Piel + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +/* + * The actual chip is STMicroelectronics LIS3LV02DL or LIS3LV02DQ that seems to + * be connected via SPI. There exists also several similar chips (such as LIS302DL or + * LIS3L02DQ) but not in the HP laptops and they have slightly different registers. + * They can also be connected via I²C. + */ + +#define LIS3LV02DL_ID 0x3A /* Also the LIS3LV02DQ */ +#define LIS302DL_ID 0x3B /* Also the LIS202DL! */ + +enum lis3lv02d_reg { + WHO_AM_I = 0x0F, + OFFSET_X = 0x16, + OFFSET_Y = 0x17, + OFFSET_Z = 0x18, + GAIN_X = 0x19, + GAIN_Y = 0x1A, + GAIN_Z = 0x1B, + CTRL_REG1 = 0x20, + CTRL_REG2 = 0x21, + CTRL_REG3 = 0x22, + HP_FILTER_RESET = 0x23, + STATUS_REG = 0x27, + OUTX_L = 0x28, + OUTX_H = 0x29, + OUTY_L = 0x2A, + OUTY_H = 0x2B, + OUTZ_L = 0x2C, + OUTZ_H = 0x2D, + FF_WU_CFG = 0x30, + FF_WU_SRC = 0x31, + FF_WU_ACK = 0x32, + FF_WU_THS_L = 0x34, + FF_WU_THS_H = 0x35, + FF_WU_DURATION = 0x36, + DD_CFG = 0x38, + DD_SRC = 0x39, + DD_ACK = 0x3A, + DD_THSI_L = 0x3C, + DD_THSI_H = 0x3D, + DD_THSE_L = 0x3E, + DD_THSE_H = 0x3F, +}; + +enum lis3lv02d_ctrl1 { + CTRL1_Xen = 0x01, + CTRL1_Yen = 0x02, + CTRL1_Zen = 0x04, + CTRL1_ST = 0x08, + CTRL1_DF0 = 0x10, + CTRL1_DF1 = 0x20, + CTRL1_PD0 = 0x40, + CTRL1_PD1 = 0x80, +}; +enum lis3lv02d_ctrl2 { + CTRL2_DAS = 0x01, + CTRL2_SIM = 0x02, + CTRL2_DRDY = 0x04, + CTRL2_IEN = 0x08, + CTRL2_BOOT = 0x10, + CTRL2_BLE = 0x20, + CTRL2_BDU = 0x40, /* Block Data Update */ + CTRL2_FS = 0x80, /* Full Scale selection */ +}; + + +enum lis3lv02d_ctrl3 { + CTRL3_CFS0 = 0x01, + CTRL3_CFS1 = 0x02, + CTRL3_FDS = 0x10, + CTRL3_HPFF = 0x20, + CTRL3_HPDD = 0x40, + CTRL3_ECK = 0x80, +}; + +enum lis3lv02d_status_reg { + STATUS_XDA = 0x01, + STATUS_YDA = 0x02, + STATUS_ZDA = 0x04, + STATUS_XYZDA = 0x08, + STATUS_XOR = 0x10, + STATUS_YOR = 0x20, + STATUS_ZOR = 0x40, + STATUS_XYZOR = 0x80, +}; + +enum lis3lv02d_ff_wu_cfg { + FF_WU_CFG_XLIE = 0x01, + FF_WU_CFG_XHIE = 0x02, + FF_WU_CFG_YLIE = 0x04, + FF_WU_CFG_YHIE = 0x08, + FF_WU_CFG_ZLIE = 0x10, + FF_WU_CFG_ZHIE = 0x20, + FF_WU_CFG_LIR = 0x40, + FF_WU_CFG_AOI = 0x80, +}; + +enum lis3lv02d_ff_wu_src { + FF_WU_SRC_XL = 0x01, + FF_WU_SRC_XH = 0x02, + FF_WU_SRC_YL = 0x04, + FF_WU_SRC_YH = 0x08, + FF_WU_SRC_ZL = 0x10, + FF_WU_SRC_ZH = 0x20, + FF_WU_SRC_IA = 0x40, +}; + +enum lis3lv02d_dd_cfg { + DD_CFG_XLIE = 0x01, + DD_CFG_XHIE = 0x02, + DD_CFG_YLIE = 0x04, + DD_CFG_YHIE = 0x08, + DD_CFG_ZLIE = 0x10, + DD_CFG_ZHIE = 0x20, + DD_CFG_LIR = 0x40, + DD_CFG_IEND = 0x80, +}; + +enum lis3lv02d_dd_src { + DD_SRC_XL = 0x01, + DD_SRC_XH = 0x02, + DD_SRC_YL = 0x04, + DD_SRC_YH = 0x08, + DD_SRC_ZL = 0x10, + DD_SRC_ZH = 0x20, + DD_SRC_IA = 0x40, +}; + diff --git a/drivers/hwmon/lm85.c b/drivers/hwmon/lm85.c index 3ff0285396f..cfc1ee90f5a 100644 --- a/drivers/hwmon/lm85.c +++ b/drivers/hwmon/lm85.c @@ -39,7 +39,8 @@ static const unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, I2C_CLIENT_END }; /* Insmod parameters */ -I2C_CLIENT_INSMOD_6(lm85b, lm85c, adm1027, adt7463, emc6d100, emc6d102); +I2C_CLIENT_INSMOD_7(lm85b, lm85c, adm1027, adt7463, adt7468, emc6d100, + emc6d102); /* The LM85 registers */ @@ -59,6 +60,12 @@ I2C_CLIENT_INSMOD_6(lm85b, lm85c, adm1027, adt7463, emc6d100, emc6d102); #define LM85_REG_COMPANY 0x3e #define LM85_REG_VERSTEP 0x3f + +#define ADT7468_REG_CFG5 0x7c +#define ADT7468_OFF64 0x01 +#define IS_ADT7468_OFF64(data) \ + ((data)->type == adt7468 && !((data)->cfg5 & ADT7468_OFF64)) + /* These are the recognized values for the above regs */ #define LM85_COMPANY_NATIONAL 0x01 #define LM85_COMPANY_ANALOG_DEV 0x41 @@ -70,6 +77,8 @@ I2C_CLIENT_INSMOD_6(lm85b, lm85c, adm1027, adt7463, emc6d100, emc6d102); #define LM85_VERSTEP_ADM1027 0x60 #define LM85_VERSTEP_ADT7463 0x62 #define LM85_VERSTEP_ADT7463C 0x6A +#define LM85_VERSTEP_ADT7468_1 0x71 +#define LM85_VERSTEP_ADT7468_2 0x72 #define LM85_VERSTEP_EMC6D100_A0 0x60 #define LM85_VERSTEP_EMC6D100_A1 0x61 #define LM85_VERSTEP_EMC6D102 0x65 @@ -306,6 +315,7 @@ struct lm85_data { u8 vid; /* Register value */ u8 vrm; /* VRM version */ u32 alarms; /* Register encoding, combined */ + u8 cfg5; /* Config Register 5 on ADT7468 */ struct lm85_autofan autofan[3]; struct lm85_zone zone[3]; }; @@ -685,6 +695,9 @@ static ssize_t set_temp_min(struct device *dev, struct device_attribute *attr, struct lm85_data *data = i2c_get_clientdata(client); long val = simple_strtol(buf, NULL, 10); + if (IS_ADT7468_OFF64(data)) + val += 64; + mutex_lock(&data->update_lock); data->temp_min[nr] = TEMP_TO_REG(val); lm85_write_value(client, LM85_REG_TEMP_MIN(nr), data->temp_min[nr]); @@ -708,6 +721,9 @@ static ssize_t set_temp_max(struct device *dev, struct device_attribute *attr, struct lm85_data *data = i2c_get_clientdata(client); long val = simple_strtol(buf, NULL, 10); + if (IS_ADT7468_OFF64(data)) + val += 64; + mutex_lock(&data->update_lock); data->temp_max[nr] = TEMP_TO_REG(val); lm85_write_value(client, LM85_REG_TEMP_MAX(nr), data->temp_max[nr]); @@ -1163,6 +1179,10 @@ static int lm85_detect(struct i2c_client *client, int kind, case LM85_VERSTEP_ADT7463C: kind = adt7463; break; + case LM85_VERSTEP_ADT7468_1: + case LM85_VERSTEP_ADT7468_2: + kind = adt7468; + break; } } else if (company == LM85_COMPANY_SMSC) { switch (verstep) { @@ -1195,6 +1215,9 @@ static int lm85_detect(struct i2c_client *client, int kind, case adt7463: type_name = "adt7463"; break; + case adt7468: + type_name = "adt7468"; + break; case emc6d100: type_name = "emc6d100"; break; @@ -1246,10 +1269,11 @@ static int lm85_probe(struct i2c_client *client, if (err) goto err_kfree; - /* The ADT7463 has an optional VRM 10 mode where pin 21 is used + /* The ADT7463/68 have an optional VRM 10 mode where pin 21 is used as a sixth digital VID input rather than an analog input. */ data->vid = lm85_read_value(client, LM85_REG_VID); - if (!(data->type == adt7463 && (data->vid & 0x80))) + if (!((data->type == adt7463 || data->type == adt7468) && + (data->vid & 0x80))) if ((err = sysfs_create_group(&client->dev.kobj, &lm85_group_in4))) goto err_remove_files; @@ -1357,7 +1381,8 @@ static struct lm85_data *lm85_update_device(struct device *dev) * There are 2 additional resolution bits per channel and we * have room for 4, so we shift them to the left. */ - if (data->type == adm1027 || data->type == adt7463) { + if (data->type == adm1027 || data->type == adt7463 || + data->type == adt7468) { int ext1 = lm85_read_value(client, ADM1027_REG_EXTEND_ADC1); int ext2 = lm85_read_value(client, @@ -1382,16 +1407,23 @@ static struct lm85_data *lm85_update_device(struct device *dev) lm85_read_value(client, LM85_REG_FAN(i)); } - if (!(data->type == adt7463 && (data->vid & 0x80))) { + if (!((data->type == adt7463 || data->type == adt7468) && + (data->vid & 0x80))) { data->in[4] = lm85_read_value(client, LM85_REG_IN(4)); } + if (data->type == adt7468) + data->cfg5 = lm85_read_value(client, ADT7468_REG_CFG5); + for (i = 0; i <= 2; ++i) { data->temp[i] = lm85_read_value(client, LM85_REG_TEMP(i)); data->pwm[i] = lm85_read_value(client, LM85_REG_PWM(i)); + + if (IS_ADT7468_OFF64(data)) + data->temp[i] -= 64; } data->alarms = lm85_read_value(client, LM85_REG_ALARM1); @@ -1446,7 +1478,8 @@ static struct lm85_data *lm85_update_device(struct device *dev) lm85_read_value(client, LM85_REG_FAN_MIN(i)); } - if (!(data->type == adt7463 && (data->vid & 0x80))) { + if (!((data->type == adt7463 || data->type == adt7468) && + (data->vid & 0x80))) { data->in_min[4] = lm85_read_value(client, LM85_REG_IN_MIN(4)); data->in_max[4] = lm85_read_value(client, @@ -1481,6 +1514,13 @@ static struct lm85_data *lm85_update_device(struct device *dev) lm85_read_value(client, LM85_REG_AFAN_LIMIT(i)); data->zone[i].critical = lm85_read_value(client, LM85_REG_AFAN_CRITICAL(i)); + + if (IS_ADT7468_OFF64(data)) { + data->temp_min[i] -= 64; + data->temp_max[i] -= 64; + data->zone[i].limit -= 64; + data->zone[i].critical -= 64; + } } i = lm85_read_value(client, LM85_REG_AFAN_SPIKE1); diff --git a/drivers/i2c/busses/i2c-sh_mobile.c b/drivers/i2c/busses/i2c-sh_mobile.c index 640cbb23732..3384a717fec 100644 --- a/drivers/i2c/busses/i2c-sh_mobile.c +++ b/drivers/i2c/busses/i2c-sh_mobile.c @@ -318,7 +318,8 @@ static int sh_mobile_i2c_isr_rx(struct sh_mobile_i2c_data *pd) } else data = i2c_op(pd, OP_RX, 0); - pd->msg->buf[real_pos] = data; + if (real_pos >= 0) + pd->msg->buf[real_pos] = data; } while (0); pd->pos++; diff --git a/drivers/ide/ide-cs.c b/drivers/ide/ide-cs.c index cb199c815b5..f50210fe558 100644 --- a/drivers/ide/ide-cs.c +++ b/drivers/ide/ide-cs.c @@ -444,6 +444,7 @@ static struct pcmcia_device_id ide_ids[] = { PCMCIA_DEVICE_PROD_ID1("STI Flash", 0xe4a13209), PCMCIA_DEVICE_PROD_ID12("STI", "Flash 5.0", 0xbf2df18d, 0x8cb57a0e), PCMCIA_MFC_DEVICE_PROD_ID12(1, "SanDisk", "ConnectPlus", 0x7a954bd9, 0x74be00c6), + PCMCIA_DEVICE_PROD_ID2("Flash Card", 0x5a362506), PCMCIA_DEVICE_NULL, }; MODULE_DEVICE_TABLE(pcmcia, ide_ids); diff --git a/drivers/idle/Kconfig b/drivers/idle/Kconfig index 108264de0ac..f15e90a453d 100644 --- a/drivers/idle/Kconfig +++ b/drivers/idle/Kconfig @@ -1,5 +1,6 @@ menu "Memory power savings" +depends on X86_64 config I7300_IDLE_IOAT_CHANNEL bool @@ -7,7 +8,7 @@ config I7300_IDLE_IOAT_CHANNEL config I7300_IDLE tristate "Intel chipset idle memory power saving driver" select I7300_IDLE_IOAT_CHANNEL - depends on X86_64 && EXPERIMENTAL + depends on EXPERIMENTAL help Enable memory power savings when idle with certain Intel server chipsets. The chipset must have I/O AT support, such as the diff --git a/drivers/infiniband/hw/cxgb3/iwch_provider.c b/drivers/infiniband/hw/cxgb3/iwch_provider.c index ecff9804358..160ef482712 100644 --- a/drivers/infiniband/hw/cxgb3/iwch_provider.c +++ b/drivers/infiniband/hw/cxgb3/iwch_provider.c @@ -1102,9 +1102,7 @@ static u64 fw_vers_string_to_u64(struct iwch_dev *iwch_dev) char *cp, *next; unsigned fw_maj, fw_min, fw_mic; - rtnl_lock(); lldev->ethtool_ops->get_drvinfo(lldev, &info); - rtnl_unlock(); next = info.fw_version + 1; cp = strsep(&next, "."); @@ -1192,9 +1190,7 @@ static ssize_t show_fw_ver(struct device *dev, struct device_attribute *attr, ch struct net_device *lldev = iwch_dev->rdev.t3cdev_p->lldev; PDBG("%s dev 0x%p\n", __func__, dev); - rtnl_lock(); lldev->ethtool_ops->get_drvinfo(lldev, &info); - rtnl_unlock(); return sprintf(buf, "%s\n", info.fw_version); } @@ -1207,9 +1203,7 @@ static ssize_t show_hca(struct device *dev, struct device_attribute *attr, struct net_device *lldev = iwch_dev->rdev.t3cdev_p->lldev; PDBG("%s dev 0x%p\n", __func__, dev); - rtnl_lock(); lldev->ethtool_ops->get_drvinfo(lldev, &info); - rtnl_unlock(); return sprintf(buf, "%s\n", info.driver); } diff --git a/drivers/infiniband/hw/cxgb3/iwch_qp.c b/drivers/infiniband/hw/cxgb3/iwch_qp.c index 3e4585c2318..19661b2f040 100644 --- a/drivers/infiniband/hw/cxgb3/iwch_qp.c +++ b/drivers/infiniband/hw/cxgb3/iwch_qp.c @@ -745,7 +745,6 @@ int iwch_post_zb_read(struct iwch_qp *qhp) wqe->read.rdmaop = T3_READ_REQ; wqe->read.reserved[0] = 0; wqe->read.reserved[1] = 0; - wqe->read.reserved[2] = 0; wqe->read.rem_stag = cpu_to_be32(1); wqe->read.rem_to = cpu_to_be64(1); wqe->read.local_stag = cpu_to_be32(1); diff --git a/drivers/infiniband/hw/ehca/ehca_irq.c b/drivers/infiniband/hw/ehca/ehca_irq.c index cb55be04442..757035ea246 100644 --- a/drivers/infiniband/hw/ehca/ehca_irq.c +++ b/drivers/infiniband/hw/ehca/ehca_irq.c @@ -359,36 +359,48 @@ static void notify_port_conf_change(struct ehca_shca *shca, int port_num) *old_attr = new_attr; } +/* replay modify_qp for sqps -- return 0 if all is well, 1 if AQP1 destroyed */ +static int replay_modify_qp(struct ehca_sport *sport) +{ + int aqp1_destroyed; + unsigned long flags; + + spin_lock_irqsave(&sport->mod_sqp_lock, flags); + + aqp1_destroyed = !sport->ibqp_sqp[IB_QPT_GSI]; + + if (sport->ibqp_sqp[IB_QPT_SMI]) + ehca_recover_sqp(sport->ibqp_sqp[IB_QPT_SMI]); + if (!aqp1_destroyed) + ehca_recover_sqp(sport->ibqp_sqp[IB_QPT_GSI]); + + spin_unlock_irqrestore(&sport->mod_sqp_lock, flags); + + return aqp1_destroyed; +} + static void parse_ec(struct ehca_shca *shca, u64 eqe) { u8 ec = EHCA_BMASK_GET(NEQE_EVENT_CODE, eqe); u8 port = EHCA_BMASK_GET(NEQE_PORT_NUMBER, eqe); u8 spec_event; struct ehca_sport *sport = &shca->sport[port - 1]; - unsigned long flags; switch (ec) { case 0x30: /* port availability change */ if (EHCA_BMASK_GET(NEQE_PORT_AVAILABILITY, eqe)) { - int suppress_event; - /* replay modify_qp for sqps */ - spin_lock_irqsave(&sport->mod_sqp_lock, flags); - suppress_event = !sport->ibqp_sqp[IB_QPT_GSI]; - if (sport->ibqp_sqp[IB_QPT_SMI]) - ehca_recover_sqp(sport->ibqp_sqp[IB_QPT_SMI]); - if (!suppress_event) - ehca_recover_sqp(sport->ibqp_sqp[IB_QPT_GSI]); - spin_unlock_irqrestore(&sport->mod_sqp_lock, flags); - - /* AQP1 was destroyed, ignore this event */ - if (suppress_event) - break; + /* only replay modify_qp calls in autodetect mode; + * if AQP1 was destroyed, the port is already down + * again and we can drop the event. + */ + if (ehca_nr_ports < 0) + if (replay_modify_qp(sport)) + break; sport->port_state = IB_PORT_ACTIVE; dispatch_port_event(shca, port, IB_EVENT_PORT_ACTIVE, "is active"); - ehca_query_sma_attr(shca, port, - &sport->saved_attr); + ehca_query_sma_attr(shca, port, &sport->saved_attr); } else { sport->port_state = IB_PORT_DOWN; dispatch_port_event(shca, port, IB_EVENT_PORT_ERR, diff --git a/drivers/infiniband/hw/ehca/ehca_qp.c b/drivers/infiniband/hw/ehca/ehca_qp.c index 4d54b9f6456..9e05ee2db39 100644 --- a/drivers/infiniband/hw/ehca/ehca_qp.c +++ b/drivers/infiniband/hw/ehca/ehca_qp.c @@ -860,6 +860,11 @@ static struct ehca_qp *internal_create_qp( if (qp_type == IB_QPT_GSI) { h_ret = ehca_define_sqp(shca, my_qp, init_attr); if (h_ret != H_SUCCESS) { + kfree(my_qp->mod_qp_parm); + my_qp->mod_qp_parm = NULL; + /* the QP pointer is no longer valid */ + shca->sport[init_attr->port_num - 1].ibqp_sqp[qp_type] = + NULL; ret = ehca2ib_return_code(h_ret); goto create_qp_exit6; } diff --git a/drivers/infiniband/hw/ipath/ipath_ruc.c b/drivers/infiniband/hw/ipath/ipath_ruc.c index fc0f6d9e603..2296832f94d 100644 --- a/drivers/infiniband/hw/ipath/ipath_ruc.c +++ b/drivers/infiniband/hw/ipath/ipath_ruc.c @@ -156,7 +156,7 @@ bail: /** * ipath_get_rwqe - copy the next RWQE into the QP's RWQE * @qp: the QP - * @wr_id_only: update wr_id only, not SGEs + * @wr_id_only: update qp->r_wr_id only, not qp->r_sge * * Return 0 if no RWQE is available, otherwise return 1. * @@ -173,8 +173,6 @@ int ipath_get_rwqe(struct ipath_qp *qp, int wr_id_only) u32 tail; int ret; - qp->r_sge.sg_list = qp->r_sg_list; - if (qp->ibqp.srq) { srq = to_isrq(qp->ibqp.srq); handler = srq->ibsrq.event_handler; @@ -206,8 +204,10 @@ int ipath_get_rwqe(struct ipath_qp *qp, int wr_id_only) wqe = get_rwqe_ptr(rq, tail); if (++tail >= rq->size) tail = 0; - } while (!wr_id_only && !ipath_init_sge(qp, wqe, &qp->r_len, - &qp->r_sge)); + if (wr_id_only) + break; + qp->r_sge.sg_list = qp->r_sg_list; + } while (!ipath_init_sge(qp, wqe, &qp->r_len, &qp->r_sge)); qp->r_wr_id = wqe->wr_id; wq->tail = tail; diff --git a/drivers/infiniband/hw/mlx4/mr.c b/drivers/infiniband/hw/mlx4/mr.c index 87f5c5a87b9..8e4d26d56a9 100644 --- a/drivers/infiniband/hw/mlx4/mr.c +++ b/drivers/infiniband/hw/mlx4/mr.c @@ -205,6 +205,7 @@ struct ib_mr *mlx4_ib_alloc_fast_reg_mr(struct ib_pd *pd, goto err_mr; mr->ibmr.rkey = mr->ibmr.lkey = mr->mmr.key; + mr->umem = NULL; return &mr->ibmr; diff --git a/drivers/infiniband/hw/nes/nes.c b/drivers/infiniband/hw/nes/nes.c index a2b04d62b1a..aa1dc41f04c 100644 --- a/drivers/infiniband/hw/nes/nes.c +++ b/drivers/infiniband/hw/nes/nes.c @@ -95,6 +95,10 @@ unsigned int wqm_quanta = 0x10000; module_param(wqm_quanta, int, 0644); MODULE_PARM_DESC(wqm_quanta, "WQM quanta"); +static unsigned int limit_maxrdreqsz; +module_param(limit_maxrdreqsz, bool, 0644); +MODULE_PARM_DESC(limit_maxrdreqsz, "Limit max read request size to 256 Bytes"); + LIST_HEAD(nes_adapter_list); static LIST_HEAD(nes_dev_list); @@ -588,6 +592,18 @@ static int __devinit nes_probe(struct pci_dev *pcidev, const struct pci_device_i nesdev->nesadapter->port_count; } + if ((limit_maxrdreqsz || + ((nesdev->nesadapter->phy_type[0] == NES_PHY_TYPE_GLADIUS) && + (hw_rev == NE020_REV1))) && + (pcie_get_readrq(pcidev) > 256)) { + if (pcie_set_readrq(pcidev, 256)) + printk(KERN_ERR PFX "Unable to set max read request" + " to 256 bytes\n"); + else + nes_debug(NES_DBG_INIT, "Max read request size set" + " to 256 bytes\n"); + } + tasklet_init(&nesdev->dpc_tasklet, nes_dpc, (unsigned long)nesdev); /* bring up the Control QP */ diff --git a/drivers/infiniband/hw/nes/nes_hw.h b/drivers/infiniband/hw/nes/nes_hw.h index 610b9d85959..bc0b4de0445 100644 --- a/drivers/infiniband/hw/nes/nes_hw.h +++ b/drivers/infiniband/hw/nes/nes_hw.h @@ -40,6 +40,7 @@ #define NES_PHY_TYPE_ARGUS 4 #define NES_PHY_TYPE_PUMA_1G 5 #define NES_PHY_TYPE_PUMA_10G 6 +#define NES_PHY_TYPE_GLADIUS 7 #define NES_MULTICAST_PF_MAX 8 diff --git a/drivers/infiniband/hw/nes/nes_verbs.c b/drivers/infiniband/hw/nes/nes_verbs.c index 932e56fcf77..d36c9a0bf1b 100644 --- a/drivers/infiniband/hw/nes/nes_verbs.c +++ b/drivers/infiniband/hw/nes/nes_verbs.c @@ -220,14 +220,14 @@ static int nes_bind_mw(struct ib_qp *ibqp, struct ib_mw *ibmw, if (nesqp->ibqp_state > IB_QPS_RTS) return -EINVAL; - spin_lock_irqsave(&nesqp->lock, flags); + spin_lock_irqsave(&nesqp->lock, flags); head = nesqp->hwqp.sq_head; qsize = nesqp->hwqp.sq_tail; /* Check for SQ overflow */ if (((head + (2 * qsize) - nesqp->hwqp.sq_tail) % qsize) == (qsize - 1)) { - spin_unlock_irqrestore(&nesqp->lock, flags); + spin_unlock_irqrestore(&nesqp->lock, flags); return -EINVAL; } @@ -269,7 +269,7 @@ static int nes_bind_mw(struct ib_qp *ibqp, struct ib_mw *ibmw, nes_write32(nesdev->regs+NES_WQE_ALLOC, (1 << 24) | 0x00800000 | nesqp->hwqp.qp_id); - spin_unlock_irqrestore(&nesqp->lock, flags); + spin_unlock_irqrestore(&nesqp->lock, flags); return 0; } @@ -349,7 +349,7 @@ static struct ib_fmr *nes_alloc_fmr(struct ib_pd *ibpd, if (nesfmr->nesmr.pbls_used > nesadapter->free_4kpbl) { spin_unlock_irqrestore(&nesadapter->pbl_lock, flags); ret = -ENOMEM; - goto failed_vpbl_alloc; + goto failed_vpbl_avail; } else { nesadapter->free_4kpbl -= nesfmr->nesmr.pbls_used; } @@ -357,7 +357,7 @@ static struct ib_fmr *nes_alloc_fmr(struct ib_pd *ibpd, if (nesfmr->nesmr.pbls_used > nesadapter->free_256pbl) { spin_unlock_irqrestore(&nesadapter->pbl_lock, flags); ret = -ENOMEM; - goto failed_vpbl_alloc; + goto failed_vpbl_avail; } else { nesadapter->free_256pbl -= nesfmr->nesmr.pbls_used; } @@ -391,14 +391,14 @@ static struct ib_fmr *nes_alloc_fmr(struct ib_pd *ibpd, goto failed_vpbl_alloc; } - nesfmr->root_vpbl.leaf_vpbl = kzalloc(sizeof(*nesfmr->root_vpbl.leaf_vpbl)*1024, GFP_KERNEL); + nesfmr->leaf_pbl_cnt = nesfmr->nesmr.pbls_used-1; + nesfmr->root_vpbl.leaf_vpbl = kzalloc(sizeof(*nesfmr->root_vpbl.leaf_vpbl)*1024, GFP_ATOMIC); if (!nesfmr->root_vpbl.leaf_vpbl) { spin_unlock_irqrestore(&nesadapter->pbl_lock, flags); ret = -ENOMEM; goto failed_leaf_vpbl_alloc; } - nesfmr->leaf_pbl_cnt = nesfmr->nesmr.pbls_used-1; nes_debug(NES_DBG_MR, "two level pbl, root_vpbl.pbl_vbase=%p" " leaf_pbl_cnt=%d root_vpbl.leaf_vpbl=%p\n", nesfmr->root_vpbl.pbl_vbase, nesfmr->leaf_pbl_cnt, nesfmr->root_vpbl.leaf_vpbl); @@ -519,6 +519,16 @@ static struct ib_fmr *nes_alloc_fmr(struct ib_pd *ibpd, nesfmr->root_vpbl.pbl_pbase); failed_vpbl_alloc: + if (nesfmr->nesmr.pbls_used != 0) { + spin_lock_irqsave(&nesadapter->pbl_lock, flags); + if (nesfmr->nesmr.pbl_4k) + nesadapter->free_4kpbl += nesfmr->nesmr.pbls_used; + else + nesadapter->free_256pbl += nesfmr->nesmr.pbls_used; + spin_unlock_irqrestore(&nesadapter->pbl_lock, flags); + } + +failed_vpbl_avail: kfree(nesfmr); failed_fmr_alloc: @@ -534,18 +544,14 @@ static struct ib_fmr *nes_alloc_fmr(struct ib_pd *ibpd, */ static int nes_dealloc_fmr(struct ib_fmr *ibfmr) { + unsigned long flags; struct nes_mr *nesmr = to_nesmr_from_ibfmr(ibfmr); struct nes_fmr *nesfmr = to_nesfmr(nesmr); struct nes_vnic *nesvnic = to_nesvnic(ibfmr->device); struct nes_device *nesdev = nesvnic->nesdev; - struct nes_mr temp_nesmr = *nesmr; + struct nes_adapter *nesadapter = nesdev->nesadapter; int i = 0; - temp_nesmr.ibmw.device = ibfmr->device; - temp_nesmr.ibmw.pd = ibfmr->pd; - temp_nesmr.ibmw.rkey = ibfmr->rkey; - temp_nesmr.ibmw.uobject = NULL; - /* free the resources */ if (nesfmr->leaf_pbl_cnt == 0) { /* single PBL case */ @@ -561,8 +567,24 @@ static int nes_dealloc_fmr(struct ib_fmr *ibfmr) pci_free_consistent(nesdev->pcidev, 8192, nesfmr->root_vpbl.pbl_vbase, nesfmr->root_vpbl.pbl_pbase); } + nesmr->ibmw.device = ibfmr->device; + nesmr->ibmw.pd = ibfmr->pd; + nesmr->ibmw.rkey = ibfmr->rkey; + nesmr->ibmw.uobject = NULL; - return nes_dealloc_mw(&temp_nesmr.ibmw); + if (nesfmr->nesmr.pbls_used != 0) { + spin_lock_irqsave(&nesadapter->pbl_lock, flags); + if (nesfmr->nesmr.pbl_4k) { + nesadapter->free_4kpbl += nesfmr->nesmr.pbls_used; + WARN_ON(nesadapter->free_4kpbl > nesadapter->max_4kpbl); + } else { + nesadapter->free_256pbl += nesfmr->nesmr.pbls_used; + WARN_ON(nesadapter->free_256pbl > nesadapter->max_256pbl); + } + spin_unlock_irqrestore(&nesadapter->pbl_lock, flags); + } + + return nes_dealloc_mw(&nesmr->ibmw); } @@ -1595,7 +1617,7 @@ static struct ib_cq *nes_create_cq(struct ib_device *ibdev, int entries, nes_ucontext->mcrqf = req.mcrqf; if (nes_ucontext->mcrqf) { if (nes_ucontext->mcrqf & 0x80000000) - nescq->hw_cq.cq_number = nesvnic->nic.qp_id + 12 + (nes_ucontext->mcrqf & 0xf) - 1; + nescq->hw_cq.cq_number = nesvnic->nic.qp_id + 28 + 2 * ((nes_ucontext->mcrqf & 0xf) - 1); else if (nes_ucontext->mcrqf & 0x40000000) nescq->hw_cq.cq_number = nes_ucontext->mcrqf & 0xffff; else @@ -3212,7 +3234,7 @@ static int nes_post_send(struct ib_qp *ibqp, struct ib_send_wr *ib_wr, if (nesqp->ibqp_state > IB_QPS_RTS) return -EINVAL; - spin_lock_irqsave(&nesqp->lock, flags); + spin_lock_irqsave(&nesqp->lock, flags); head = nesqp->hwqp.sq_head; @@ -3337,7 +3359,7 @@ static int nes_post_send(struct ib_qp *ibqp, struct ib_send_wr *ib_wr, (counter << 24) | 0x00800000 | nesqp->hwqp.qp_id); } - spin_unlock_irqrestore(&nesqp->lock, flags); + spin_unlock_irqrestore(&nesqp->lock, flags); if (err) *bad_wr = ib_wr; @@ -3368,7 +3390,7 @@ static int nes_post_recv(struct ib_qp *ibqp, struct ib_recv_wr *ib_wr, if (nesqp->ibqp_state > IB_QPS_RTS) return -EINVAL; - spin_lock_irqsave(&nesqp->lock, flags); + spin_lock_irqsave(&nesqp->lock, flags); head = nesqp->hwqp.rq_head; @@ -3421,7 +3443,7 @@ static int nes_post_recv(struct ib_qp *ibqp, struct ib_recv_wr *ib_wr, nes_write32(nesdev->regs+NES_WQE_ALLOC, (counter<<24) | nesqp->hwqp.qp_id); } - spin_unlock_irqrestore(&nesqp->lock, flags); + spin_unlock_irqrestore(&nesqp->lock, flags); if (err) *bad_wr = ib_wr; @@ -3453,7 +3475,7 @@ static int nes_poll_cq(struct ib_cq *ibcq, int num_entries, struct ib_wc *entry) nes_debug(NES_DBG_CQ, "\n"); - spin_lock_irqsave(&nescq->lock, flags); + spin_lock_irqsave(&nescq->lock, flags); head = nescq->hw_cq.cq_head; cq_size = nescq->hw_cq.cq_size; @@ -3562,7 +3584,7 @@ static int nes_poll_cq(struct ib_cq *ibcq, int num_entries, struct ib_wc *entry) nes_debug(NES_DBG_CQ, "Reporting %u completions for CQ%u.\n", cqe_count, nescq->hw_cq.cq_number); - spin_unlock_irqrestore(&nescq->lock, flags); + spin_unlock_irqrestore(&nescq->lock, flags); return cqe_count; } diff --git a/drivers/infiniband/ulp/ipoib/ipoib_main.c b/drivers/infiniband/ulp/ipoib/ipoib_main.c index fddded7900d..85257f6b957 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_main.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_main.c @@ -106,12 +106,13 @@ int ipoib_open(struct net_device *dev) ipoib_dbg(priv, "bringing up interface\n"); - napi_enable(&priv->napi); set_bit(IPOIB_FLAG_ADMIN_UP, &priv->flags); if (ipoib_pkey_dev_delay_open(dev)) return 0; + napi_enable(&priv->napi); + if (ipoib_ib_dev_open(dev)) { napi_disable(&priv->napi); return -EINVAL; @@ -546,6 +547,7 @@ static int path_rec_start(struct net_device *dev, if (path->query_id < 0) { ipoib_warn(priv, "ib_sa_path_rec_get failed: %d\n", path->query_id); path->query = NULL; + complete(&path->done); return path->query_id; } @@ -662,7 +664,7 @@ static void unicast_arp_send(struct sk_buff *skb, struct net_device *dev, skb_push(skb, sizeof *phdr); __skb_queue_tail(&path->queue, skb); - if (path_rec_start(dev, path)) { + if (!path->query && path_rec_start(dev, path)) { spin_unlock_irqrestore(&priv->lock, flags); path_free(dev, path); return; diff --git a/drivers/isdn/i4l/isdn_net.c b/drivers/isdn/i4l/isdn_net.c index bb904a0a98b..1bfc55d7a26 100644 --- a/drivers/isdn/i4l/isdn_net.c +++ b/drivers/isdn/i4l/isdn_net.c @@ -1641,8 +1641,10 @@ isdn_net_ciscohdlck_slarp_send_reply(isdn_net_local *lp) /* slarp reply, send own ip/netmask; if values are nonsense remote * should think we are unable to provide it with an address via SLARP */ p += put_u32(p, CISCO_SLARP_REPLY); - p += put_u32(p, addr); // address - p += put_u32(p, mask); // netmask + *(__be32 *)p = addr; // address + p += 4; + *(__be32 *)p = mask; // netmask + p += 4; p += put_u16(p, 0); // unused isdn_net_write_super(lp, skb); diff --git a/drivers/md/dm-mpath.c b/drivers/md/dm-mpath.c index 4840733cd90..3d7f4923cd1 100644 --- a/drivers/md/dm-mpath.c +++ b/drivers/md/dm-mpath.c @@ -441,13 +441,13 @@ static void process_queued_ios(struct work_struct *work) __choose_pgpath(m); pgpath = m->current_pgpath; - m->pgpath_to_activate = m->current_pgpath; if ((pgpath && !m->queue_io) || (!pgpath && !m->queue_if_no_path)) must_queue = 0; - if (m->pg_init_required && !m->pg_init_in_progress) { + if (m->pg_init_required && !m->pg_init_in_progress && pgpath) { + m->pgpath_to_activate = pgpath; m->pg_init_count++; m->pg_init_required = 0; m->pg_init_in_progress = 1; @@ -708,6 +708,10 @@ static int parse_hw_handler(struct arg_set *as, struct multipath *m) m->hw_handler_name = NULL; return -EINVAL; } + + if (hw_argc > 1) + DMWARN("Ignoring user-specified arguments for " + "hardware handler \"%s\"", m->hw_handler_name); consume(as, hw_argc - 1); return 0; diff --git a/drivers/md/dm-raid1.c b/drivers/md/dm-raid1.c index 9d7b53ed75b..ec43f9fa4b2 100644 --- a/drivers/md/dm-raid1.c +++ b/drivers/md/dm-raid1.c @@ -1032,6 +1032,7 @@ static void mirror_dtr(struct dm_target *ti) del_timer_sync(&ms->timer); flush_workqueue(ms->kmirrord_wq); + flush_scheduled_work(); dm_kcopyd_client_destroy(ms->kcopyd_client); destroy_workqueue(ms->kmirrord_wq); free_context(ms, ti, ms->nr_mirrors); diff --git a/drivers/md/dm-stripe.c b/drivers/md/dm-stripe.c index a2d068dbe9e..9e4ef88d421 100644 --- a/drivers/md/dm-stripe.c +++ b/drivers/md/dm-stripe.c @@ -320,8 +320,10 @@ int __init dm_stripe_init(void) int r; r = dm_register_target(&stripe_target); - if (r < 0) + if (r < 0) { DMWARN("target registration failed"); + return r; + } kstriped = create_singlethread_workqueue("kstriped"); if (!kstriped) { diff --git a/drivers/md/dm.c b/drivers/md/dm.c index 6963ad14840..c99e4728ff4 100644 --- a/drivers/md/dm.c +++ b/drivers/md/dm.c @@ -375,7 +375,7 @@ static void start_io_acct(struct dm_io *io) dm_disk(md)->part0.in_flight = atomic_inc_return(&md->pending); } -static int end_io_acct(struct dm_io *io) +static void end_io_acct(struct dm_io *io) { struct mapped_device *md = io->md; struct bio *bio = io->bio; @@ -391,7 +391,9 @@ static int end_io_acct(struct dm_io *io) dm_disk(md)->part0.in_flight = pending = atomic_dec_return(&md->pending); - return !pending; + /* nudge anyone waiting on suspend queue */ + if (!pending) + wake_up(&md->wait); } /* @@ -499,9 +501,7 @@ static void dec_pending(struct dm_io *io, int error) spin_unlock_irqrestore(&io->md->pushback_lock, flags); } - if (end_io_acct(io)) - /* nudge anyone waiting on suspend queue */ - wake_up(&io->md->wait); + end_io_acct(io); if (io->error != DM_ENDIO_REQUEUE) { blk_add_trace_bio(io->md->queue, io->bio, @@ -937,16 +937,24 @@ static void dm_unplug_all(struct request_queue *q) static int dm_any_congested(void *congested_data, int bdi_bits) { - int r; - struct mapped_device *md = (struct mapped_device *) congested_data; - struct dm_table *map = dm_get_table(md); + int r = bdi_bits; + struct mapped_device *md = congested_data; + struct dm_table *map; - if (!map || test_bit(DMF_BLOCK_IO, &md->flags)) - r = bdi_bits; - else - r = dm_table_any_congested(map, bdi_bits); + atomic_inc(&md->pending); + + if (!test_bit(DMF_BLOCK_IO, &md->flags)) { + map = dm_get_table(md); + if (map) { + r = dm_table_any_congested(map, bdi_bits); + dm_table_put(map); + } + } + + if (!atomic_dec_return(&md->pending)) + /* nudge anyone waiting on suspend queue */ + wake_up(&md->wait); - dm_table_put(map); return r; } diff --git a/drivers/media/video/tvaudio.c b/drivers/media/video/tvaudio.c index b59e47272ab..3720f0e03a1 100644 --- a/drivers/media/video/tvaudio.c +++ b/drivers/media/video/tvaudio.c @@ -1,5 +1,5 @@ /* - * experimental driver for simple i2c audio chips. + * Driver for simple i2c audio chips. * * Copyright (c) 2000 Gerd Knorr * based on code by: @@ -7,6 +7,10 @@ * Steve VanDeBogart (vandebo@uclink.berkeley.edu) * Greg Alexander (galexand@acm.org) * + * Copyright(c) 2005-2008 Mauro Carvalho Chehab + * - Some cleanups, code fixes, etc + * - Convert it to V4L2 API + * * This code is placed under the terms of the GNU General Public License * * OPTIONS: @@ -30,6 +34,7 @@ #include <media/tvaudio.h> #include <media/v4l2-common.h> +#include <media/v4l2-ioctl.h> #include <media/v4l2-chip-ident.h> #include <media/v4l2-i2c-drv-legacy.h> @@ -58,7 +63,6 @@ typedef int (*checkit)(struct CHIPSTATE*); typedef int (*initialize)(struct CHIPSTATE*); typedef int (*getmode)(struct CHIPSTATE*); typedef void (*setmode)(struct CHIPSTATE*, int mode); -typedef void (*checkmode)(struct CHIPSTATE*); /* i2c command */ typedef struct AUDIOCMD { @@ -79,6 +83,7 @@ struct CHIPDESC { #define CHIP_HAS_VOLUME 1 #define CHIP_HAS_BASSTREBLE 2 #define CHIP_HAS_INPUTSEL 4 +#define CHIP_NEED_CHECKMODE 8 /* various i2c command sequences */ audiocmd init; @@ -96,23 +101,20 @@ struct CHIPDESC { getmode getmode; setmode setmode; - /* check / autoswitch audio after channel switches */ - checkmode checkmode; - /* input switch register + values for v4l inputs */ int inputreg; int inputmap[4]; int inputmute; int inputmask; }; -static struct CHIPDESC chiplist[]; /* current state of the chip */ struct CHIPSTATE { struct i2c_client *c; - /* index into CHIPDESC array */ - int type; + /* chip-specific description - should point to + an entry at CHIPDESC table */ + struct CHIPDESC *desc; /* shadow register set */ audiocmd shadow; @@ -152,7 +154,7 @@ static int chip_write(struct CHIPSTATE *chip, int subaddr, int val) { unsigned char buffer[2]; - if (-1 == subaddr) { + if (subaddr < 0) { v4l_dbg(1, debug, chip->c, "%s: chip_write: 0x%x\n", chip->c->name, val); chip->shadow.bytes[1] = val; @@ -163,6 +165,13 @@ static int chip_write(struct CHIPSTATE *chip, int subaddr, int val) return -1; } } else { + if (subaddr + 1 >= ARRAY_SIZE(chip->shadow.bytes)) { + v4l_info(chip->c, + "Tried to access a non-existent register: %d\n", + subaddr); + return -EINVAL; + } + v4l_dbg(1, debug, chip->c, "%s: chip_write: reg%d=0x%x\n", chip->c->name, subaddr, val); chip->shadow.bytes[subaddr+1] = val; @@ -177,12 +186,20 @@ static int chip_write(struct CHIPSTATE *chip, int subaddr, int val) return 0; } -static int chip_write_masked(struct CHIPSTATE *chip, int subaddr, int val, int mask) +static int chip_write_masked(struct CHIPSTATE *chip, + int subaddr, int val, int mask) { if (mask != 0) { - if (-1 == subaddr) { + if (subaddr < 0) { val = (chip->shadow.bytes[1] & ~mask) | (val & mask); } else { + if (subaddr + 1 >= ARRAY_SIZE(chip->shadow.bytes)) { + v4l_info(chip->c, + "Tried to access a non-existent register: %d\n", + subaddr); + return -EINVAL; + } + val = (chip->shadow.bytes[subaddr+1] & ~mask) | (val & mask); } } @@ -228,6 +245,15 @@ static int chip_cmd(struct CHIPSTATE *chip, char *name, audiocmd *cmd) if (0 == cmd->count) return 0; + if (cmd->count + cmd->bytes[0] - 1 >= ARRAY_SIZE(chip->shadow.bytes)) { + v4l_info(chip->c, + "Tried to access a non-existent register range: %d to %d\n", + cmd->bytes[0] + 1, cmd->bytes[0] + cmd->count - 1); + return -EINVAL; + } + + /* FIXME: it seems that the shadow bytes are wrong bellow !*/ + /* update our shadow register set; print bytes if (debug > 0) */ v4l_dbg(1, debug, chip->c, "%s: chip_cmd(%s): reg=%d, data:", chip->c->name, name,cmd->bytes[0]); @@ -263,7 +289,8 @@ static void chip_thread_wake(unsigned long data) static int chip_thread(void *data) { struct CHIPSTATE *chip = data; - struct CHIPDESC *desc = chiplist + chip->type; + struct CHIPDESC *desc = chip->desc; + int mode; v4l_dbg(1, debug, chip->c, "%s: thread started\n", chip->c->name); set_freezable(); @@ -282,7 +309,26 @@ static int chip_thread(void *data) continue; /* have a look what's going on */ - desc->checkmode(chip); + mode = desc->getmode(chip); + if (mode == chip->prevmode) + continue; + + /* chip detected a new audio mode - set it */ + v4l_dbg(1, debug, chip->c, "%s: thread checkmode\n", + chip->c->name); + + chip->prevmode = mode; + + if (mode & V4L2_TUNER_MODE_STEREO) + desc->setmode(chip, V4L2_TUNER_MODE_STEREO); + if (mode & V4L2_TUNER_MODE_LANG1_LANG2) + desc->setmode(chip, V4L2_TUNER_MODE_STEREO); + else if (mode & V4L2_TUNER_MODE_LANG1) + desc->setmode(chip, V4L2_TUNER_MODE_LANG1); + else if (mode & V4L2_TUNER_MODE_LANG2) + desc->setmode(chip, V4L2_TUNER_MODE_LANG2); + else + desc->setmode(chip, V4L2_TUNER_MODE_MONO); /* schedule next check */ mod_timer(&chip->wt, jiffies+msecs_to_jiffies(2000)); @@ -292,29 +338,6 @@ static int chip_thread(void *data) return 0; } -static void generic_checkmode(struct CHIPSTATE *chip) -{ - struct CHIPDESC *desc = chiplist + chip->type; - int mode = desc->getmode(chip); - - if (mode == chip->prevmode) - return; - - v4l_dbg(1, debug, chip->c, "%s: thread checkmode\n", chip->c->name); - chip->prevmode = mode; - - if (mode & V4L2_TUNER_MODE_STEREO) - desc->setmode(chip,V4L2_TUNER_MODE_STEREO); - if (mode & V4L2_TUNER_MODE_LANG1_LANG2) - desc->setmode(chip,V4L2_TUNER_MODE_STEREO); - else if (mode & V4L2_TUNER_MODE_LANG1) - desc->setmode(chip,V4L2_TUNER_MODE_LANG1); - else if (mode & V4L2_TUNER_MODE_LANG2) - desc->setmode(chip,V4L2_TUNER_MODE_LANG2); - else - desc->setmode(chip,V4L2_TUNER_MODE_MONO); -} - /* ---------------------------------------------------------------------- */ /* audio chip descriptions - defines+functions for tda9840 */ @@ -777,7 +800,7 @@ static struct tda9874a_MODES { char *name; audiocmd cmd; } tda9874a_modelist[9] = { - { "A2, B/G", + { "A2, B/G", /* default */ { 9, { TDA9874A_C1FRA, 0x72,0x95,0x55, 0x77,0xA0,0x00, 0x00,0x00 }} }, { "A2, M (Korea)", { 9, { TDA9874A_C1FRA, 0x5D,0xC0,0x00, 0x62,0x6A,0xAA, 0x20,0x22 }} }, @@ -791,7 +814,7 @@ static struct tda9874a_MODES { { 9, { TDA9874A_C1FRA, 0x7D,0x00,0x00, 0x88,0x8A,0xAA, 0x08,0x33 }} }, { "NICAM, B/G", { 9, { TDA9874A_C1FRA, 0x72,0x95,0x55, 0x79,0xEA,0xAA, 0x08,0x33 }} }, - { "NICAM, D/K", /* default */ + { "NICAM, D/K", { 9, { TDA9874A_C1FRA, 0x87,0x6A,0xAA, 0x79,0xEA,0xAA, 0x08,0x33 }} }, { "NICAM, L", { 9, { TDA9874A_C1FRA, 0x87,0x6A,0xAA, 0x79,0xEA,0xAA, 0x09,0x33 }} } @@ -981,7 +1004,7 @@ static int tda9874a_initialize(struct CHIPSTATE *chip) { if (tda9874a_SIF > 2) tda9874a_SIF = 1; - if (tda9874a_STD > 8) + if (tda9874a_STD >= ARRAY_SIZE(tda9874a_modelist)) tda9874a_STD = 0; if(tda9874a_AMSEL > 1) tda9874a_AMSEL = 0; @@ -1089,7 +1112,7 @@ static int tda8425_shift12(int val) { return (val >> 12) | 0xf0; } static int tda8425_initialize(struct CHIPSTATE *chip) { - struct CHIPDESC *desc = chiplist + chip->type; + struct CHIPDESC *desc = chip->desc; int inputmap[4] = { /* tuner */ TDA8425_S1_CH2, /* radio */ TDA8425_S1_CH1, /* extern */ TDA8425_S1_CH1, /* intern */ TDA8425_S1_OFF}; @@ -1259,27 +1282,28 @@ static struct CHIPDESC chiplist[] = { .addr_lo = I2C_ADDR_TDA9840 >> 1, .addr_hi = I2C_ADDR_TDA9840 >> 1, .registers = 5, + .flags = CHIP_NEED_CHECKMODE, + /* callbacks */ .checkit = tda9840_checkit, .getmode = tda9840_getmode, .setmode = tda9840_setmode, - .checkmode = generic_checkmode, .init = { 2, { TDA9840_TEST, TDA9840_TEST_INT1SN /* ,TDA9840_SW, TDA9840_MONO */} } }, { .name = "tda9873h", - .checkit = tda9873_checkit, .insmodopt = &tda9873, .addr_lo = I2C_ADDR_TDA985x_L >> 1, .addr_hi = I2C_ADDR_TDA985x_H >> 1, .registers = 3, - .flags = CHIP_HAS_INPUTSEL, + .flags = CHIP_HAS_INPUTSEL | CHIP_NEED_CHECKMODE, + /* callbacks */ + .checkit = tda9873_checkit, .getmode = tda9873_getmode, .setmode = tda9873_setmode, - .checkmode = generic_checkmode, .init = { 4, { TDA9873_SW, 0xa4, 0x06, 0x03 } }, .inputreg = TDA9873_SW, @@ -1290,15 +1314,16 @@ static struct CHIPDESC chiplist[] = { }, { .name = "tda9874h/a", - .checkit = tda9874a_checkit, - .initialize = tda9874a_initialize, .insmodopt = &tda9874a, .addr_lo = I2C_ADDR_TDA9874 >> 1, .addr_hi = I2C_ADDR_TDA9874 >> 1, + .flags = CHIP_NEED_CHECKMODE, + /* callbacks */ + .initialize = tda9874a_initialize, + .checkit = tda9874a_checkit, .getmode = tda9874a_getmode, .setmode = tda9874a_setmode, - .checkmode = generic_checkmode, }, { .name = "tda9850", @@ -1324,10 +1349,11 @@ static struct CHIPDESC chiplist[] = { .rightreg = TDA9855_VR, .bassreg = TDA9855_BA, .treblereg = TDA9855_TR, + + /* callbacks */ .volfunc = tda9855_volume, .bassfunc = tda9855_bass, .treblefunc = tda9855_treble, - .getmode = tda985x_getmode, .setmode = tda985x_setmode, @@ -1348,6 +1374,8 @@ static struct CHIPDESC chiplist[] = { .rightreg = TEA6300_VL, .bassreg = TEA6300_BA, .treblereg = TEA6300_TR, + + /* callbacks */ .volfunc = tea6300_shift10, .bassfunc = tea6300_shift12, .treblefunc = tea6300_shift12, @@ -1358,7 +1386,6 @@ static struct CHIPDESC chiplist[] = { }, { .name = "tea6320", - .initialize = tea6320_initialize, .insmodopt = &tea6320, .addr_lo = I2C_ADDR_TEA6300 >> 1, .addr_hi = I2C_ADDR_TEA6300 >> 1, @@ -1369,6 +1396,9 @@ static struct CHIPDESC chiplist[] = { .rightreg = TEA6320_V, .bassreg = TEA6320_BA, .treblereg = TEA6320_TR, + + /* callbacks */ + .initialize = tea6320_initialize, .volfunc = tea6320_volume, .bassfunc = tea6320_shift11, .treblefunc = tea6320_shift11, @@ -1401,16 +1431,18 @@ static struct CHIPDESC chiplist[] = { .rightreg = TDA8425_VR, .bassreg = TDA8425_BA, .treblereg = TDA8425_TR, + + /* callbacks */ + .initialize = tda8425_initialize, .volfunc = tda8425_shift10, .bassfunc = tda8425_shift12, .treblefunc = tda8425_shift12, + .setmode = tda8425_setmode, .inputreg = TDA8425_S1, .inputmap = { TDA8425_S1_CH1, TDA8425_S1_CH1, TDA8425_S1_CH1 }, .inputmute = TDA8425_S1_OFF, - .setmode = tda8425_setmode, - .initialize = tda8425_initialize, }, { .name = "pic16c54 (PV951)", @@ -1434,10 +1466,11 @@ static struct CHIPDESC chiplist[] = { .addr_lo = I2C_ADDR_TDA9840 >> 1, .addr_hi = I2C_ADDR_TDA9840 >> 1, .registers = 2, + .flags = CHIP_NEED_CHECKMODE, + /* callbacks */ .getmode = ta8874z_getmode, .setmode = ta8874z_setmode, - .checkmode = generic_checkmode, .init = {2, { TA8874Z_MONO_SET, TA8874Z_SEPARATION_DEFAULT}}, }, @@ -1481,6 +1514,7 @@ static int chip_probe(struct i2c_client *client, const struct i2c_device_id *id) } if (desc->name == NULL) { v4l_dbg(1, debug, client, "no matching chip description found\n"); + kfree(chip); return -EIO; } v4l_info(client, "%s found @ 0x%x (%s)\n", desc->name, client->addr<<1, client->adapter->name); @@ -1494,7 +1528,7 @@ static int chip_probe(struct i2c_client *client, const struct i2c_device_id *id) /* fill required data structures */ if (!id) strlcpy(client->name, desc->name, I2C_NAME_SIZE); - chip->type = desc-chiplist; + chip->desc = desc; chip->shadow.count = desc->registers+1; chip->prevmode = -1; chip->audmode = V4L2_TUNER_MODE_LANG1; @@ -1506,20 +1540,49 @@ static int chip_probe(struct i2c_client *client, const struct i2c_device_id *id) chip_cmd(chip,"init",&desc->init); if (desc->flags & CHIP_HAS_VOLUME) { - chip->left = desc->leftinit ? desc->leftinit : 65535; - chip->right = desc->rightinit ? desc->rightinit : 65535; - chip_write(chip,desc->leftreg,desc->volfunc(chip->left)); - chip_write(chip,desc->rightreg,desc->volfunc(chip->right)); + if (!desc->volfunc) { + /* This shouldn't be happen. Warn user, but keep working + without volume controls + */ + v4l_info(chip->c, "volume callback undefined!\n"); + desc->flags &= ~CHIP_HAS_VOLUME; + } else { + chip->left = desc->leftinit ? desc->leftinit : 65535; + chip->right = desc->rightinit ? desc->rightinit : 65535; + chip_write(chip, desc->leftreg, + desc->volfunc(chip->left)); + chip_write(chip, desc->rightreg, + desc->volfunc(chip->right)); + } } if (desc->flags & CHIP_HAS_BASSTREBLE) { - chip->treble = desc->trebleinit ? desc->trebleinit : 32768; - chip->bass = desc->bassinit ? desc->bassinit : 32768; - chip_write(chip,desc->bassreg,desc->bassfunc(chip->bass)); - chip_write(chip,desc->treblereg,desc->treblefunc(chip->treble)); + if (!desc->bassfunc || !desc->treblefunc) { + /* This shouldn't be happen. Warn user, but keep working + without bass/treble controls + */ + v4l_info(chip->c, "bass/treble callbacks undefined!\n"); + desc->flags &= ~CHIP_HAS_BASSTREBLE; + } else { + chip->treble = desc->trebleinit ? + desc->trebleinit : 32768; + chip->bass = desc->bassinit ? + desc->bassinit : 32768; + chip_write(chip, desc->bassreg, + desc->bassfunc(chip->bass)); + chip_write(chip, desc->treblereg, + desc->treblefunc(chip->treble)); + } } chip->thread = NULL; - if (desc->checkmode) { + if (desc->flags & CHIP_NEED_CHECKMODE) { + if (!desc->getmode || !desc->setmode) { + /* This shouldn't be happen. Warn user, but keep working + without kthread + */ + v4l_info(chip->c, "set/get mode callbacks undefined!\n"); + return 0; + } /* start async thread */ init_timer(&chip->wt); chip->wt.function = chip_thread_wake; @@ -1552,7 +1615,7 @@ static int chip_remove(struct i2c_client *client) static int tvaudio_get_ctrl(struct CHIPSTATE *chip, struct v4l2_control *ctrl) { - struct CHIPDESC *desc = chiplist + chip->type; + struct CHIPDESC *desc = chip->desc; switch (ctrl->id) { case V4L2_CID_AUDIO_MUTE: @@ -1576,13 +1639,13 @@ static int tvaudio_get_ctrl(struct CHIPSTATE *chip, return 0; } case V4L2_CID_AUDIO_BASS: - if (desc->flags & CHIP_HAS_BASSTREBLE) + if (!(desc->flags & CHIP_HAS_BASSTREBLE)) break; ctrl->value = chip->bass; return 0; case V4L2_CID_AUDIO_TREBLE: - if (desc->flags & CHIP_HAS_BASSTREBLE) - return -EINVAL; + if (!(desc->flags & CHIP_HAS_BASSTREBLE)) + break; ctrl->value = chip->treble; return 0; } @@ -1592,7 +1655,7 @@ static int tvaudio_get_ctrl(struct CHIPSTATE *chip, static int tvaudio_set_ctrl(struct CHIPSTATE *chip, struct v4l2_control *ctrl) { - struct CHIPDESC *desc = chiplist + chip->type; + struct CHIPDESC *desc = chip->desc; switch (ctrl->id) { case V4L2_CID_AUDIO_MUTE: @@ -1642,16 +1705,15 @@ static int tvaudio_set_ctrl(struct CHIPSTATE *chip, return 0; } case V4L2_CID_AUDIO_BASS: - if (desc->flags & CHIP_HAS_BASSTREBLE) + if (!(desc->flags & CHIP_HAS_BASSTREBLE)) break; chip->bass = ctrl->value; chip_write(chip,desc->bassreg,desc->bassfunc(chip->bass)); return 0; case V4L2_CID_AUDIO_TREBLE: - if (desc->flags & CHIP_HAS_BASSTREBLE) - return -EINVAL; - + if (!(desc->flags & CHIP_HAS_BASSTREBLE)) + break; chip->treble = ctrl->value; chip_write(chip,desc->treblereg,desc->treblefunc(chip->treble)); @@ -1668,9 +1730,12 @@ static int chip_command(struct i2c_client *client, unsigned int cmd, void *arg) { struct CHIPSTATE *chip = i2c_get_clientdata(client); - struct CHIPDESC *desc = chiplist + chip->type; + struct CHIPDESC *desc = chip->desc; - v4l_dbg(1, debug, chip->c, "%s: chip_command 0x%x\n", chip->c->name, cmd); + if (debug > 0) { + v4l_i2c_print_ioctl(chip->c, cmd); + printk("\n"); + } switch (cmd) { case AUDC_SET_RADIO: @@ -1695,7 +1760,7 @@ static int chip_command(struct i2c_client *client, break; case V4L2_CID_AUDIO_BASS: case V4L2_CID_AUDIO_TREBLE: - if (desc->flags & CHIP_HAS_BASSTREBLE) + if (!(desc->flags & CHIP_HAS_BASSTREBLE)) return -EINVAL; break; default: @@ -1792,12 +1857,20 @@ static int chip_command(struct i2c_client *client, break; case VIDIOC_S_FREQUENCY: chip->mode = 0; /* automatic */ - if (desc->checkmode && desc->setmode) { + + /* For chips that provide getmode and setmode, and doesn't + automatically follows the stereo carrier, a kthread is + created to set the audio standard. In this case, when then + the video channel is changed, tvaudio starts on MONO mode. + After waiting for 2 seconds, the kernel thread is called, + to follow whatever audio standard is pointed by the + audio carrier. + */ + if (chip->thread) { desc->setmode(chip,V4L2_TUNER_MODE_MONO); if (chip->prevmode != V4L2_TUNER_MODE_MONO) chip->prevmode = -1; /* reset previous mode */ mod_timer(&chip->wt, jiffies+msecs_to_jiffies(2000)); - /* the thread will call checkmode() later */ } break; @@ -1836,9 +1909,3 @@ static struct v4l2_i2c_driver_data v4l2_i2c_data = { .legacy_probe = chip_legacy_probe, .id_table = chip_id, }; - -/* - * Local variables: - * c-basic-offset: 8 - * End: - */ diff --git a/drivers/mfd/da903x.c b/drivers/mfd/da903x.c index b57326ae464..0b5bd85dfce 100644 --- a/drivers/mfd/da903x.c +++ b/drivers/mfd/da903x.c @@ -267,7 +267,7 @@ static int da9030_mask_events(struct da903x_chip *chip, unsigned int events) { uint8_t v[3]; - chip->events_mask &= ~events; + chip->events_mask |= events; v[0] = (chip->events_mask & 0xff); v[1] = (chip->events_mask >> 8) & 0xff; diff --git a/drivers/mfd/wm8350-i2c.c b/drivers/mfd/wm8350-i2c.c index 8dfe21bb3bd..3e0ce0e50ea 100644 --- a/drivers/mfd/wm8350-i2c.c +++ b/drivers/mfd/wm8350-i2c.c @@ -30,7 +30,12 @@ static int wm8350_i2c_read_device(struct wm8350 *wm8350, char reg, ret = i2c_master_send(wm8350->i2c_client, ®, 1); if (ret < 0) return ret; - return i2c_master_recv(wm8350->i2c_client, dest, bytes); + ret = i2c_master_recv(wm8350->i2c_client, dest, bytes); + if (ret < 0) + return ret; + if (ret != bytes) + return -EIO; + return 0; } static int wm8350_i2c_write_device(struct wm8350 *wm8350, char reg, @@ -38,13 +43,19 @@ static int wm8350_i2c_write_device(struct wm8350 *wm8350, char reg, { /* we add 1 byte for device register */ u8 msg[(WM8350_MAX_REGISTER << 1) + 1]; + int ret; if (bytes > ((WM8350_MAX_REGISTER << 1) + 1)) return -EINVAL; msg[0] = reg; memcpy(&msg[1], src, bytes); - return i2c_master_send(wm8350->i2c_client, msg, bytes + 1); + ret = i2c_master_send(wm8350->i2c_client, msg, bytes + 1); + if (ret < 0) + return ret; + if (ret != bytes + 1) + return -EIO; + return 0; } static int wm8350_i2c_probe(struct i2c_client *i2c, diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index 9494400e8fd..fee7304102a 100644 --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig @@ -227,10 +227,20 @@ config HP_WMI To compile this driver as a module, choose M here: the module will be called hp-wmi. +config ICS932S401 + tristate "Integrated Circuits ICS932S401" + depends on I2C && EXPERIMENTAL + help + If you say yes here you get support for the Integrated Circuits + ICS932S401 clock control chips. + + This driver can also be built as a module. If so, the module + will be called ics932s401. + config MSI_LAPTOP tristate "MSI Laptop Extras" depends on X86 - depends on ACPI_EC + depends on ACPI depends on BACKLIGHT_CLASS_DEVICE ---help--- This is a driver for laptops built by MSI (MICRO-STAR @@ -260,7 +270,7 @@ config PANASONIC_LAPTOP config COMPAL_LAPTOP tristate "Compal Laptop Extras" depends on X86 - depends on ACPI_EC + depends on ACPI depends on BACKLIGHT_CLASS_DEVICE ---help--- This is a driver for laptops built by Compal: @@ -488,4 +498,6 @@ config SGI_GRU_DEBUG This option enables addition debugging code for the SGI GRU driver. If you are unsure, say N. +source "drivers/misc/c2port/Kconfig" + endif # MISC_DEVICES diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile index 909e2468cdc..817f7f5ab3b 100644 --- a/drivers/misc/Makefile +++ b/drivers/misc/Makefile @@ -14,6 +14,7 @@ obj-$(CONFIG_ATMEL_PWM) += atmel_pwm.o obj-$(CONFIG_ATMEL_SSC) += atmel-ssc.o obj-$(CONFIG_ATMEL_TCLIB) += atmel_tclib.o obj-$(CONFIG_HP_WMI) += hp-wmi.o +obj-$(CONFIG_ICS932S401) += ics932s401.o obj-$(CONFIG_TC1100_WMI) += tc1100-wmi.o obj-$(CONFIG_LKDTM) += lkdtm.o obj-$(CONFIG_TIFM_CORE) += tifm_core.o @@ -31,3 +32,4 @@ obj-$(CONFIG_KGDB_TESTS) += kgdbts.o obj-$(CONFIG_SGI_XP) += sgi-xp/ obj-$(CONFIG_SGI_GRU) += sgi-gru/ obj-$(CONFIG_HP_ILO) += hpilo.o +obj-$(CONFIG_C2PORT) += c2port/ diff --git a/drivers/misc/acer-wmi.c b/drivers/misc/acer-wmi.c index 0532a2de2ce..94c9f911824 100644 --- a/drivers/misc/acer-wmi.c +++ b/drivers/misc/acer-wmi.c @@ -1297,6 +1297,12 @@ static int __init acer_wmi_init(void) set_quirks(); + if (!acpi_video_backlight_support() && has_cap(ACER_CAP_BRIGHTNESS)) { + interface->capability &= ~ACER_CAP_BRIGHTNESS; + printk(ACER_INFO "Brightness must be controlled by " + "generic video driver\n"); + } + if (platform_driver_register(&acer_platform_driver)) { printk(ACER_ERR "Unable to register platform driver.\n"); goto error_platform_register; diff --git a/drivers/misc/asus-laptop.c b/drivers/misc/asus-laptop.c index a9d5228724a..8fb8b359104 100644 --- a/drivers/misc/asus-laptop.c +++ b/drivers/misc/asus-laptop.c @@ -1208,9 +1208,13 @@ static int __init asus_laptop_init(void) dev = acpi_get_physical_device(hotk->device->handle); - result = asus_backlight_init(dev); - if (result) - goto fail_backlight; + if (!acpi_video_backlight_support()) { + result = asus_backlight_init(dev); + if (result) + goto fail_backlight; + } else + printk(ASUS_INFO "Brightness ignored, must be controlled by " + "ACPI video driver\n"); result = asus_led_init(dev); if (result) diff --git a/drivers/misc/c2port/Kconfig b/drivers/misc/c2port/Kconfig new file mode 100644 index 00000000000..e46af9a5810 --- /dev/null +++ b/drivers/misc/c2port/Kconfig @@ -0,0 +1,35 @@ +# +# C2 port devices +# + +menuconfig C2PORT + tristate "Silicon Labs C2 port support (EXPERIMENTAL)" + depends on EXPERIMENTAL + default no + help + This option enables support for Silicon Labs C2 port used to + program Silicon micro controller chips (and other 8051 compatible). + + If your board have no such micro controllers you don't need this + interface at all. + + To compile this driver as a module, choose M here: the module will + be called c2port_core. Note that you also need a client module + usually called c2port-*. + + If you are not sure, say N here. + +if C2PORT + +config C2PORT_DURAMAR_2150 + tristate "C2 port support for Eurotech's Duramar 2150 (EXPERIMENTAL)" + depends on X86 && C2PORT + default no + help + This option enables C2 support for the Eurotech's Duramar 2150 + on board micro controller. + + To compile this driver as a module, choose M here: the module will + be called c2port-duramar2150. + +endif # C2PORT diff --git a/drivers/misc/c2port/Makefile b/drivers/misc/c2port/Makefile new file mode 100644 index 00000000000..3b2cf43d60f --- /dev/null +++ b/drivers/misc/c2port/Makefile @@ -0,0 +1,3 @@ +obj-$(CONFIG_C2PORT) += core.o + +obj-$(CONFIG_C2PORT_DURAMAR_2150) += c2port-duramar2150.o diff --git a/drivers/misc/c2port/c2port-duramar2150.c b/drivers/misc/c2port/c2port-duramar2150.c new file mode 100644 index 00000000000..338dcc12150 --- /dev/null +++ b/drivers/misc/c2port/c2port-duramar2150.c @@ -0,0 +1,158 @@ +/* + * Silicon Labs C2 port Linux support for Eurotech Duramar 2150 + * + * Copyright (c) 2008 Rodolfo Giometti <giometti@linux.it> + * Copyright (c) 2008 Eurotech S.p.A. <info@eurotech.it> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation + */ + +#include <linux/errno.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/delay.h> +#include <linux/io.h> +#include <linux/c2port.h> + +#define DATA_PORT 0x325 +#define DIR_PORT 0x326 +#define C2D (1 << 0) +#define C2CK (1 << 1) + +static DEFINE_MUTEX(update_lock); + +/* + * C2 port operations + */ + +static void duramar2150_c2port_access(struct c2port_device *dev, int status) +{ + u8 v; + + mutex_lock(&update_lock); + + v = inb(DIR_PORT); + + /* 0 = input, 1 = output */ + if (status) + outb(v | (C2D | C2CK), DIR_PORT); + else + /* When access is "off" is important that both lines are set + * as inputs or hi-impedence */ + outb(v & ~(C2D | C2CK), DIR_PORT); + + mutex_unlock(&update_lock); +} + +static void duramar2150_c2port_c2d_dir(struct c2port_device *dev, int dir) +{ + u8 v; + + mutex_lock(&update_lock); + + v = inb(DIR_PORT); + + if (dir) + outb(v & ~C2D, DIR_PORT); + else + outb(v | C2D, DIR_PORT); + + mutex_unlock(&update_lock); +} + +static int duramar2150_c2port_c2d_get(struct c2port_device *dev) +{ + return inb(DATA_PORT) & C2D; +} + +static void duramar2150_c2port_c2d_set(struct c2port_device *dev, int status) +{ + u8 v; + + mutex_lock(&update_lock); + + v = inb(DATA_PORT); + + if (status) + outb(v | C2D, DATA_PORT); + else + outb(v & ~C2D, DATA_PORT); + + mutex_unlock(&update_lock); +} + +static void duramar2150_c2port_c2ck_set(struct c2port_device *dev, int status) +{ + u8 v; + + mutex_lock(&update_lock); + + v = inb(DATA_PORT); + + if (status) + outb(v | C2CK, DATA_PORT); + else + outb(v & ~C2CK, DATA_PORT); + + mutex_unlock(&update_lock); +} + +static struct c2port_ops duramar2150_c2port_ops = { + .block_size = 512, /* bytes */ + .blocks_num = 30, /* total flash size: 15360 bytes */ + + .access = duramar2150_c2port_access, + .c2d_dir = duramar2150_c2port_c2d_dir, + .c2d_get = duramar2150_c2port_c2d_get, + .c2d_set = duramar2150_c2port_c2d_set, + .c2ck_set = duramar2150_c2port_c2ck_set, +}; + +static struct c2port_device *duramar2150_c2port_dev; + +/* + * Module stuff + */ + +static int __init duramar2150_c2port_init(void) +{ + struct resource *res; + int ret = 0; + + res = request_region(0x325, 2, "c2port"); + if (!res) + return -EBUSY; + + duramar2150_c2port_dev = c2port_device_register("uc", + &duramar2150_c2port_ops, NULL); + if (!duramar2150_c2port_dev) { + ret = -ENODEV; + goto free_region; + } + + return 0; + +free_region: + release_region(0x325, 2); + return ret; +} + +static void __exit duramar2150_c2port_exit(void) +{ + /* Setup the GPIOs as input by default (access = 0) */ + duramar2150_c2port_access(duramar2150_c2port_dev, 0); + + c2port_device_unregister(duramar2150_c2port_dev); + + release_region(0x325, 2); +} + +module_init(duramar2150_c2port_init); +module_exit(duramar2150_c2port_exit); + +MODULE_AUTHOR("Rodolfo Giometti <giometti@linux.it>"); +MODULE_DESCRIPTION("Silicon Labs C2 port Linux support for Duramar 2150"); +MODULE_LICENSE("GPL"); diff --git a/drivers/misc/c2port/core.c b/drivers/misc/c2port/core.c new file mode 100644 index 00000000000..0207dd59090 --- /dev/null +++ b/drivers/misc/c2port/core.c @@ -0,0 +1,1003 @@ +/* + * Silicon Labs C2 port core Linux support + * + * Copyright (c) 2007 Rodolfo Giometti <giometti@linux.it> + * Copyright (c) 2007 Eurotech S.p.A. <info@eurotech.it> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/device.h> +#include <linux/errno.h> +#include <linux/err.h> +#include <linux/kernel.h> +#include <linux/ctype.h> +#include <linux/delay.h> +#include <linux/idr.h> +#include <linux/sched.h> + +#include <linux/c2port.h> + +#define DRIVER_NAME "c2port" +#define DRIVER_VERSION "0.51.0" + +static DEFINE_SPINLOCK(c2port_idr_lock); +static DEFINE_IDR(c2port_idr); + +/* + * Local variables + */ + +static struct class *c2port_class; + +/* + * C2 registers & commands defines + */ + +/* C2 registers */ +#define C2PORT_DEVICEID 0x00 +#define C2PORT_REVID 0x01 +#define C2PORT_FPCTL 0x02 +#define C2PORT_FPDAT 0xB4 + +/* C2 interface commands */ +#define C2PORT_GET_VERSION 0x01 +#define C2PORT_DEVICE_ERASE 0x03 +#define C2PORT_BLOCK_READ 0x06 +#define C2PORT_BLOCK_WRITE 0x07 +#define C2PORT_PAGE_ERASE 0x08 + +/* C2 status return codes */ +#define C2PORT_INVALID_COMMAND 0x00 +#define C2PORT_COMMAND_FAILED 0x02 +#define C2PORT_COMMAND_OK 0x0d + +/* + * C2 port low level signal managements + */ + +static void c2port_reset(struct c2port_device *dev) +{ + struct c2port_ops *ops = dev->ops; + + /* To reset the device we have to keep clock line low for at least + * 20us. + */ + local_irq_disable(); + ops->c2ck_set(dev, 0); + udelay(25); + ops->c2ck_set(dev, 1); + local_irq_enable(); + + udelay(1); +} + +static void c2port_strobe_ck(struct c2port_device *dev) +{ + struct c2port_ops *ops = dev->ops; + + /* During hi-low-hi transition we disable local IRQs to avoid + * interructions since C2 port specification says that it must be + * shorter than 5us, otherwise the microcontroller may consider + * it as a reset signal! + */ + local_irq_disable(); + ops->c2ck_set(dev, 0); + udelay(1); + ops->c2ck_set(dev, 1); + local_irq_enable(); + + udelay(1); +} + +/* + * C2 port basic functions + */ + +static void c2port_write_ar(struct c2port_device *dev, u8 addr) +{ + struct c2port_ops *ops = dev->ops; + int i; + + /* START field */ + c2port_strobe_ck(dev); + + /* INS field (11b, LSB first) */ + ops->c2d_dir(dev, 0); + ops->c2d_set(dev, 1); + c2port_strobe_ck(dev); + ops->c2d_set(dev, 1); + c2port_strobe_ck(dev); + + /* ADDRESS field */ + for (i = 0; i < 8; i++) { + ops->c2d_set(dev, addr & 0x01); + c2port_strobe_ck(dev); + + addr >>= 1; + } + + /* STOP field */ + ops->c2d_dir(dev, 1); + c2port_strobe_ck(dev); +} + +static int c2port_read_ar(struct c2port_device *dev, u8 *addr) +{ + struct c2port_ops *ops = dev->ops; + int i; + + /* START field */ + c2port_strobe_ck(dev); + + /* INS field (10b, LSB first) */ + ops->c2d_dir(dev, 0); + ops->c2d_set(dev, 0); + c2port_strobe_ck(dev); + ops->c2d_set(dev, 1); + c2port_strobe_ck(dev); + + /* ADDRESS field */ + ops->c2d_dir(dev, 1); + *addr = 0; + for (i = 0; i < 8; i++) { + *addr >>= 1; /* shift in 8-bit ADDRESS field LSB first */ + + c2port_strobe_ck(dev); + if (ops->c2d_get(dev)) + *addr |= 0x80; + } + + /* STOP field */ + c2port_strobe_ck(dev); + + return 0; +} + +static int c2port_write_dr(struct c2port_device *dev, u8 data) +{ + struct c2port_ops *ops = dev->ops; + int timeout, i; + + /* START field */ + c2port_strobe_ck(dev); + + /* INS field (01b, LSB first) */ + ops->c2d_dir(dev, 0); + ops->c2d_set(dev, 1); + c2port_strobe_ck(dev); + ops->c2d_set(dev, 0); + c2port_strobe_ck(dev); + + /* LENGTH field (00b, LSB first -> 1 byte) */ + ops->c2d_set(dev, 0); + c2port_strobe_ck(dev); + ops->c2d_set(dev, 0); + c2port_strobe_ck(dev); + + /* DATA field */ + for (i = 0; i < 8; i++) { + ops->c2d_set(dev, data & 0x01); + c2port_strobe_ck(dev); + + data >>= 1; + } + + /* WAIT field */ + ops->c2d_dir(dev, 1); + timeout = 20; + do { + c2port_strobe_ck(dev); + if (ops->c2d_get(dev)) + break; + + udelay(1); + } while (--timeout > 0); + if (timeout == 0) + return -EIO; + + /* STOP field */ + c2port_strobe_ck(dev); + + return 0; +} + +static int c2port_read_dr(struct c2port_device *dev, u8 *data) +{ + struct c2port_ops *ops = dev->ops; + int timeout, i; + + /* START field */ + c2port_strobe_ck(dev); + + /* INS field (00b, LSB first) */ + ops->c2d_dir(dev, 0); + ops->c2d_set(dev, 0); + c2port_strobe_ck(dev); + ops->c2d_set(dev, 0); + c2port_strobe_ck(dev); + + /* LENGTH field (00b, LSB first -> 1 byte) */ + ops->c2d_set(dev, 0); + c2port_strobe_ck(dev); + ops->c2d_set(dev, 0); + c2port_strobe_ck(dev); + + /* WAIT field */ + ops->c2d_dir(dev, 1); + timeout = 20; + do { + c2port_strobe_ck(dev); + if (ops->c2d_get(dev)) + break; + + udelay(1); + } while (--timeout > 0); + if (timeout == 0) + return -EIO; + + /* DATA field */ + *data = 0; + for (i = 0; i < 8; i++) { + *data >>= 1; /* shift in 8-bit DATA field LSB first */ + + c2port_strobe_ck(dev); + if (ops->c2d_get(dev)) + *data |= 0x80; + } + + /* STOP field */ + c2port_strobe_ck(dev); + + return 0; +} + +static int c2port_poll_in_busy(struct c2port_device *dev) +{ + u8 addr; + int ret, timeout = 20; + + do { + ret = (c2port_read_ar(dev, &addr)); + if (ret < 0) + return -EIO; + + if (!(addr & 0x02)) + break; + + udelay(1); + } while (--timeout > 0); + if (timeout == 0) + return -EIO; + + return 0; +} + +static int c2port_poll_out_ready(struct c2port_device *dev) +{ + u8 addr; + int ret, timeout = 10000; /* erase flash needs long time... */ + + do { + ret = (c2port_read_ar(dev, &addr)); + if (ret < 0) + return -EIO; + + if (addr & 0x01) + break; + + udelay(1); + } while (--timeout > 0); + if (timeout == 0) + return -EIO; + + return 0; +} + +/* + * sysfs methods + */ + +static ssize_t c2port_show_name(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct c2port_device *c2dev = dev_get_drvdata(dev); + + return sprintf(buf, "%s\n", c2dev->name); +} + +static ssize_t c2port_show_flash_blocks_num(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct c2port_device *c2dev = dev_get_drvdata(dev); + struct c2port_ops *ops = c2dev->ops; + + return sprintf(buf, "%d\n", ops->blocks_num); +} + +static ssize_t c2port_show_flash_block_size(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct c2port_device *c2dev = dev_get_drvdata(dev); + struct c2port_ops *ops = c2dev->ops; + + return sprintf(buf, "%d\n", ops->block_size); +} + +static ssize_t c2port_show_flash_size(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct c2port_device *c2dev = dev_get_drvdata(dev); + struct c2port_ops *ops = c2dev->ops; + + return sprintf(buf, "%d\n", ops->blocks_num * ops->block_size); +} + +static ssize_t c2port_show_access(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct c2port_device *c2dev = dev_get_drvdata(dev); + + return sprintf(buf, "%d\n", c2dev->access); +} + +static ssize_t c2port_store_access(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct c2port_device *c2dev = dev_get_drvdata(dev); + struct c2port_ops *ops = c2dev->ops; + int status, ret; + + ret = sscanf(buf, "%d", &status); + if (ret != 1) + return -EINVAL; + + mutex_lock(&c2dev->mutex); + + c2dev->access = !!status; + + /* If access is "on" clock should be HIGH _before_ setting the line + * as output and data line should be set as INPUT anyway */ + if (c2dev->access) + ops->c2ck_set(c2dev, 1); + ops->access(c2dev, c2dev->access); + if (c2dev->access) + ops->c2d_dir(c2dev, 1); + + mutex_unlock(&c2dev->mutex); + + return count; +} + +static ssize_t c2port_store_reset(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct c2port_device *c2dev = dev_get_drvdata(dev); + + /* Check the device access status */ + if (!c2dev->access) + return -EBUSY; + + mutex_lock(&c2dev->mutex); + + c2port_reset(c2dev); + c2dev->flash_access = 0; + + mutex_unlock(&c2dev->mutex); + + return count; +} + +static ssize_t __c2port_show_dev_id(struct c2port_device *dev, char *buf) +{ + u8 data; + int ret; + + /* Select DEVICEID register for C2 data register accesses */ + c2port_write_ar(dev, C2PORT_DEVICEID); + + /* Read and return the device ID register */ + ret = c2port_read_dr(dev, &data); + if (ret < 0) + return ret; + + return sprintf(buf, "%d\n", data); +} + +static ssize_t c2port_show_dev_id(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct c2port_device *c2dev = dev_get_drvdata(dev); + ssize_t ret; + + /* Check the device access status */ + if (!c2dev->access) + return -EBUSY; + + mutex_lock(&c2dev->mutex); + ret = __c2port_show_dev_id(c2dev, buf); + mutex_unlock(&c2dev->mutex); + + if (ret < 0) + dev_err(dev, "cannot read from %s\n", c2dev->name); + + return ret; +} + +static ssize_t __c2port_show_rev_id(struct c2port_device *dev, char *buf) +{ + u8 data; + int ret; + + /* Select REVID register for C2 data register accesses */ + c2port_write_ar(dev, C2PORT_REVID); + + /* Read and return the revision ID register */ + ret = c2port_read_dr(dev, &data); + if (ret < 0) + return ret; + + return sprintf(buf, "%d\n", data); +} + +static ssize_t c2port_show_rev_id(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct c2port_device *c2dev = dev_get_drvdata(dev); + ssize_t ret; + + /* Check the device access status */ + if (!c2dev->access) + return -EBUSY; + + mutex_lock(&c2dev->mutex); + ret = __c2port_show_rev_id(c2dev, buf); + mutex_unlock(&c2dev->mutex); + + if (ret < 0) + dev_err(c2dev->dev, "cannot read from %s\n", c2dev->name); + + return ret; +} + +static ssize_t c2port_show_flash_access(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct c2port_device *c2dev = dev_get_drvdata(dev); + + return sprintf(buf, "%d\n", c2dev->flash_access); +} + +static ssize_t __c2port_store_flash_access(struct c2port_device *dev, + int status) +{ + int ret; + + /* Check the device access status */ + if (!dev->access) + return -EBUSY; + + dev->flash_access = !!status; + + /* If flash_access is off we have nothing to do... */ + if (dev->flash_access == 0) + return 0; + + /* Target the C2 flash programming control register for C2 data + * register access */ + c2port_write_ar(dev, C2PORT_FPCTL); + + /* Write the first keycode to enable C2 Flash programming */ + ret = c2port_write_dr(dev, 0x02); + if (ret < 0) + return ret; + + /* Write the second keycode to enable C2 Flash programming */ + ret = c2port_write_dr(dev, 0x01); + if (ret < 0) + return ret; + + /* Delay for at least 20ms to ensure the target is ready for + * C2 flash programming */ + mdelay(25); + + return 0; +} + +static ssize_t c2port_store_flash_access(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct c2port_device *c2dev = dev_get_drvdata(dev); + int status; + ssize_t ret; + + ret = sscanf(buf, "%d", &status); + if (ret != 1) + return -EINVAL; + + mutex_lock(&c2dev->mutex); + ret = __c2port_store_flash_access(c2dev, status); + mutex_unlock(&c2dev->mutex); + + if (ret < 0) { + dev_err(c2dev->dev, "cannot enable %s flash programming\n", + c2dev->name); + return ret; + } + + return count; +} + +static ssize_t __c2port_write_flash_erase(struct c2port_device *dev) +{ + u8 status; + int ret; + + /* Target the C2 flash programming data register for C2 data register + * access. + */ + c2port_write_ar(dev, C2PORT_FPDAT); + + /* Send device erase command */ + c2port_write_dr(dev, C2PORT_DEVICE_ERASE); + + /* Wait for input acknowledge */ + ret = c2port_poll_in_busy(dev); + if (ret < 0) + return ret; + + /* Should check status before starting FLASH access sequence */ + + /* Wait for status information */ + ret = c2port_poll_out_ready(dev); + if (ret < 0) + return ret; + + /* Read flash programming interface status */ + ret = c2port_read_dr(dev, &status); + if (ret < 0) + return ret; + if (status != C2PORT_COMMAND_OK) + return -EBUSY; + + /* Send a three-byte arming sequence to enable the device erase. + * If the sequence is not received correctly, the command will be + * ignored. + * Sequence is: 0xde, 0xad, 0xa5. + */ + c2port_write_dr(dev, 0xde); + ret = c2port_poll_in_busy(dev); + if (ret < 0) + return ret; + c2port_write_dr(dev, 0xad); + ret = c2port_poll_in_busy(dev); + if (ret < 0) + return ret; + c2port_write_dr(dev, 0xa5); + ret = c2port_poll_in_busy(dev); + if (ret < 0) + return ret; + + ret = c2port_poll_out_ready(dev); + if (ret < 0) + return ret; + + return 0; +} + +static ssize_t c2port_store_flash_erase(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct c2port_device *c2dev = dev_get_drvdata(dev); + int ret; + + /* Check the device and flash access status */ + if (!c2dev->access || !c2dev->flash_access) + return -EBUSY; + + mutex_lock(&c2dev->mutex); + ret = __c2port_write_flash_erase(c2dev); + mutex_unlock(&c2dev->mutex); + + if (ret < 0) { + dev_err(c2dev->dev, "cannot erase %s flash\n", c2dev->name); + return ret; + } + + return count; +} + +static ssize_t __c2port_read_flash_data(struct c2port_device *dev, + char *buffer, loff_t offset, size_t count) +{ + struct c2port_ops *ops = dev->ops; + u8 status, nread = 128; + int i, ret; + + /* Check for flash end */ + if (offset >= ops->block_size * ops->blocks_num) + return 0; + + if (ops->block_size * ops->blocks_num - offset < nread) + nread = ops->block_size * ops->blocks_num - offset; + if (count < nread) + nread = count; + if (nread == 0) + return nread; + + /* Target the C2 flash programming data register for C2 data register + * access */ + c2port_write_ar(dev, C2PORT_FPDAT); + + /* Send flash block read command */ + c2port_write_dr(dev, C2PORT_BLOCK_READ); + + /* Wait for input acknowledge */ + ret = c2port_poll_in_busy(dev); + if (ret < 0) + return ret; + + /* Should check status before starting FLASH access sequence */ + + /* Wait for status information */ + ret = c2port_poll_out_ready(dev); + if (ret < 0) + return ret; + + /* Read flash programming interface status */ + ret = c2port_read_dr(dev, &status); + if (ret < 0) + return ret; + if (status != C2PORT_COMMAND_OK) + return -EBUSY; + + /* Send address high byte */ + c2port_write_dr(dev, offset >> 8); + ret = c2port_poll_in_busy(dev); + if (ret < 0) + return ret; + + /* Send address low byte */ + c2port_write_dr(dev, offset & 0x00ff); + ret = c2port_poll_in_busy(dev); + if (ret < 0) + return ret; + + /* Send address block size */ + c2port_write_dr(dev, nread); + ret = c2port_poll_in_busy(dev); + if (ret < 0) + return ret; + + /* Should check status before reading FLASH block */ + + /* Wait for status information */ + ret = c2port_poll_out_ready(dev); + if (ret < 0) + return ret; + + /* Read flash programming interface status */ + ret = c2port_read_dr(dev, &status); + if (ret < 0) + return ret; + if (status != C2PORT_COMMAND_OK) + return -EBUSY; + + /* Read flash block */ + for (i = 0; i < nread; i++) { + ret = c2port_poll_out_ready(dev); + if (ret < 0) + return ret; + + ret = c2port_read_dr(dev, buffer+i); + if (ret < 0) + return ret; + } + + return nread; +} + +static ssize_t c2port_read_flash_data(struct kobject *kobj, + struct bin_attribute *attr, + char *buffer, loff_t offset, size_t count) +{ + struct c2port_device *c2dev = + dev_get_drvdata(container_of(kobj, + struct device, kobj)); + ssize_t ret; + + /* Check the device and flash access status */ + if (!c2dev->access || !c2dev->flash_access) + return -EBUSY; + + mutex_lock(&c2dev->mutex); + ret = __c2port_read_flash_data(c2dev, buffer, offset, count); + mutex_unlock(&c2dev->mutex); + + if (ret < 0) + dev_err(c2dev->dev, "cannot read %s flash\n", c2dev->name); + + return ret; +} + +static ssize_t __c2port_write_flash_data(struct c2port_device *dev, + char *buffer, loff_t offset, size_t count) +{ + struct c2port_ops *ops = dev->ops; + u8 status, nwrite = 128; + int i, ret; + + if (nwrite > count) + nwrite = count; + if (ops->block_size * ops->blocks_num - offset < nwrite) + nwrite = ops->block_size * ops->blocks_num - offset; + + /* Check for flash end */ + if (offset >= ops->block_size * ops->blocks_num) + return -EINVAL; + + /* Target the C2 flash programming data register for C2 data register + * access */ + c2port_write_ar(dev, C2PORT_FPDAT); + + /* Send flash block write command */ + c2port_write_dr(dev, C2PORT_BLOCK_WRITE); + + /* Wait for input acknowledge */ + ret = c2port_poll_in_busy(dev); + if (ret < 0) + return ret; + + /* Should check status before starting FLASH access sequence */ + + /* Wait for status information */ + ret = c2port_poll_out_ready(dev); + if (ret < 0) + return ret; + + /* Read flash programming interface status */ + ret = c2port_read_dr(dev, &status); + if (ret < 0) + return ret; + if (status != C2PORT_COMMAND_OK) + return -EBUSY; + + /* Send address high byte */ + c2port_write_dr(dev, offset >> 8); + ret = c2port_poll_in_busy(dev); + if (ret < 0) + return ret; + + /* Send address low byte */ + c2port_write_dr(dev, offset & 0x00ff); + ret = c2port_poll_in_busy(dev); + if (ret < 0) + return ret; + + /* Send address block size */ + c2port_write_dr(dev, nwrite); + ret = c2port_poll_in_busy(dev); + if (ret < 0) + return ret; + + /* Should check status before writing FLASH block */ + + /* Wait for status information */ + ret = c2port_poll_out_ready(dev); + if (ret < 0) + return ret; + + /* Read flash programming interface status */ + ret = c2port_read_dr(dev, &status); + if (ret < 0) + return ret; + if (status != C2PORT_COMMAND_OK) + return -EBUSY; + + /* Write flash block */ + for (i = 0; i < nwrite; i++) { + ret = c2port_write_dr(dev, *(buffer+i)); + if (ret < 0) + return ret; + + ret = c2port_poll_in_busy(dev); + if (ret < 0) + return ret; + + } + + /* Wait for last flash write to complete */ + ret = c2port_poll_out_ready(dev); + if (ret < 0) + return ret; + + return nwrite; +} + +static ssize_t c2port_write_flash_data(struct kobject *kobj, + struct bin_attribute *attr, + char *buffer, loff_t offset, size_t count) +{ + struct c2port_device *c2dev = + dev_get_drvdata(container_of(kobj, + struct device, kobj)); + int ret; + + /* Check the device access status */ + if (!c2dev->access || !c2dev->flash_access) + return -EBUSY; + + mutex_lock(&c2dev->mutex); + ret = __c2port_write_flash_data(c2dev, buffer, offset, count); + mutex_unlock(&c2dev->mutex); + + if (ret < 0) + dev_err(c2dev->dev, "cannot write %s flash\n", c2dev->name); + + return ret; +} + +/* + * Class attributes + */ + +static struct device_attribute c2port_attrs[] = { + __ATTR(name, 0444, c2port_show_name, NULL), + __ATTR(flash_blocks_num, 0444, c2port_show_flash_blocks_num, NULL), + __ATTR(flash_block_size, 0444, c2port_show_flash_block_size, NULL), + __ATTR(flash_size, 0444, c2port_show_flash_size, NULL), + __ATTR(access, 0644, c2port_show_access, c2port_store_access), + __ATTR(reset, 0200, NULL, c2port_store_reset), + __ATTR(dev_id, 0444, c2port_show_dev_id, NULL), + __ATTR(rev_id, 0444, c2port_show_rev_id, NULL), + + __ATTR(flash_access, 0644, c2port_show_flash_access, + c2port_store_flash_access), + __ATTR(flash_erase, 0200, NULL, c2port_store_flash_erase), + __ATTR_NULL, +}; + +static struct bin_attribute c2port_bin_attrs = { + .attr = { + .name = "flash_data", + .mode = 0644 + }, + .read = c2port_read_flash_data, + .write = c2port_write_flash_data, + /* .size is computed at run-time */ +}; + +/* + * Exported functions + */ + +struct c2port_device *c2port_device_register(char *name, + struct c2port_ops *ops, void *devdata) +{ + struct c2port_device *c2dev; + int id, ret; + + if (unlikely(!ops) || unlikely(!ops->access) || \ + unlikely(!ops->c2d_dir) || unlikely(!ops->c2ck_set) || \ + unlikely(!ops->c2d_get) || unlikely(!ops->c2d_set)) + return ERR_PTR(-EINVAL); + + c2dev = kmalloc(sizeof(struct c2port_device), GFP_KERNEL); + if (unlikely(!c2dev)) + return ERR_PTR(-ENOMEM); + + ret = idr_pre_get(&c2port_idr, GFP_KERNEL); + if (!ret) { + ret = -ENOMEM; + goto error_idr_get_new; + } + + spin_lock_irq(&c2port_idr_lock); + ret = idr_get_new(&c2port_idr, c2dev, &id); + spin_unlock_irq(&c2port_idr_lock); + + if (ret < 0) + goto error_idr_get_new; + c2dev->id = id; + + c2dev->dev = device_create(c2port_class, NULL, 0, c2dev, + "c2port%d", id); + if (unlikely(!c2dev->dev)) { + ret = -ENOMEM; + goto error_device_create; + } + dev_set_drvdata(c2dev->dev, c2dev); + + strncpy(c2dev->name, name, C2PORT_NAME_LEN); + c2dev->ops = ops; + mutex_init(&c2dev->mutex); + + /* Create binary file */ + c2port_bin_attrs.size = ops->blocks_num * ops->block_size; + ret = device_create_bin_file(c2dev->dev, &c2port_bin_attrs); + if (unlikely(ret)) + goto error_device_create_bin_file; + + /* By default C2 port access is off */ + c2dev->access = c2dev->flash_access = 0; + ops->access(c2dev, 0); + + dev_info(c2dev->dev, "C2 port %s added\n", name); + dev_info(c2dev->dev, "%s flash has %d blocks x %d bytes " + "(%d bytes total)\n", + name, ops->blocks_num, ops->block_size, + ops->blocks_num * ops->block_size); + + return c2dev; + +error_device_create_bin_file: + device_destroy(c2port_class, 0); + +error_device_create: + spin_lock_irq(&c2port_idr_lock); + idr_remove(&c2port_idr, id); + spin_unlock_irq(&c2port_idr_lock); + +error_idr_get_new: + kfree(c2dev); + + return ERR_PTR(ret); +} +EXPORT_SYMBOL(c2port_device_register); + +void c2port_device_unregister(struct c2port_device *c2dev) +{ + if (!c2dev) + return; + + dev_info(c2dev->dev, "C2 port %s removed\n", c2dev->name); + + device_remove_bin_file(c2dev->dev, &c2port_bin_attrs); + spin_lock_irq(&c2port_idr_lock); + idr_remove(&c2port_idr, c2dev->id); + spin_unlock_irq(&c2port_idr_lock); + + device_destroy(c2port_class, c2dev->id); + + kfree(c2dev); +} +EXPORT_SYMBOL(c2port_device_unregister); + +/* + * Module stuff + */ + +static int __init c2port_init(void) +{ + printk(KERN_INFO "Silicon Labs C2 port support v. " DRIVER_VERSION + " - (C) 2007 Rodolfo Giometti\n"); + + c2port_class = class_create(THIS_MODULE, "c2port"); + if (!c2port_class) { + printk(KERN_ERR "c2port: failed to allocate class\n"); + return -ENOMEM; + } + c2port_class->dev_attrs = c2port_attrs; + + return 0; +} + +static void __exit c2port_exit(void) +{ + class_destroy(c2port_class); +} + +module_init(c2port_init); +module_exit(c2port_exit); + +MODULE_AUTHOR("Rodolfo Giometti <giometti@linux.it>"); +MODULE_DESCRIPTION("Silicon Labs C2 port support v. " DRIVER_VERSION); +MODULE_LICENSE("GPL"); diff --git a/drivers/misc/compal-laptop.c b/drivers/misc/compal-laptop.c index 344b790a625..11003bba10d 100644 --- a/drivers/misc/compal-laptop.c +++ b/drivers/misc/compal-laptop.c @@ -326,12 +326,14 @@ static int __init compal_init(void) /* Register backlight stuff */ - compalbl_device = backlight_device_register("compal-laptop", NULL, NULL, - &compalbl_ops); - if (IS_ERR(compalbl_device)) - return PTR_ERR(compalbl_device); + if (!acpi_video_backlight_support()) { + compalbl_device = backlight_device_register("compal-laptop", NULL, NULL, + &compalbl_ops); + if (IS_ERR(compalbl_device)) + return PTR_ERR(compalbl_device); - compalbl_device->props.max_brightness = COMPAL_LCD_LEVEL_MAX-1; + compalbl_device->props.max_brightness = COMPAL_LCD_LEVEL_MAX-1; + } ret = platform_driver_register(&compal_driver); if (ret) diff --git a/drivers/misc/eeepc-laptop.c b/drivers/misc/eeepc-laptop.c index 9ef98b2d503..02fe2b8b893 100644 --- a/drivers/misc/eeepc-laptop.c +++ b/drivers/misc/eeepc-laptop.c @@ -825,9 +825,15 @@ static int __init eeepc_laptop_init(void) return -ENODEV; } dev = acpi_get_physical_device(ehotk->device->handle); - result = eeepc_backlight_init(dev); - if (result) - goto fail_backlight; + + if (!acpi_video_backlight_support()) { + result = eeepc_backlight_init(dev); + if (result) + goto fail_backlight; + } else + printk(EEEPC_INFO "Backlight controlled by ACPI video " + "driver\n"); + result = eeepc_hwmon_init(dev); if (result) goto fail_hwmon; diff --git a/drivers/misc/fujitsu-laptop.c b/drivers/misc/fujitsu-laptop.c index d2cf0bfe316..a7dd3e9fb79 100644 --- a/drivers/misc/fujitsu-laptop.c +++ b/drivers/misc/fujitsu-laptop.c @@ -464,6 +464,14 @@ static int dmi_check_cb_s6410(const struct dmi_system_id *id) return 0; } +static int dmi_check_cb_s6420(const struct dmi_system_id *id) +{ + dmi_check_cb_common(id); + fujitsu->keycode1 = KEY_SCREENLOCK; /* "Lock" */ + fujitsu->keycode2 = KEY_HELP; /* "Mobility Center" */ + return 0; +} + static int dmi_check_cb_p8010(const struct dmi_system_id *id) { dmi_check_cb_common(id); @@ -473,7 +481,7 @@ static int dmi_check_cb_p8010(const struct dmi_system_id *id) return 0; } -static struct dmi_system_id __initdata fujitsu_dmi_table[] = { +static struct dmi_system_id fujitsu_dmi_table[] = { { .ident = "Fujitsu Siemens S6410", .matches = { @@ -482,6 +490,13 @@ static struct dmi_system_id __initdata fujitsu_dmi_table[] = { }, .callback = dmi_check_cb_s6410}, { + .ident = "Fujitsu Siemens S6420", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"), + DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK S6420"), + }, + .callback = dmi_check_cb_s6420}, + { .ident = "Fujitsu LifeBook P8010", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"), @@ -990,16 +1005,16 @@ static int __init fujitsu_init(void) /* Register backlight stuff */ - fujitsu->bl_device = - backlight_device_register("fujitsu-laptop", NULL, NULL, - &fujitsubl_ops); - if (IS_ERR(fujitsu->bl_device)) - return PTR_ERR(fujitsu->bl_device); - - max_brightness = fujitsu->max_brightness; - - fujitsu->bl_device->props.max_brightness = max_brightness - 1; - fujitsu->bl_device->props.brightness = fujitsu->brightness_level; + if (!acpi_video_backlight_support()) { + fujitsu->bl_device = + backlight_device_register("fujitsu-laptop", NULL, NULL, + &fujitsubl_ops); + if (IS_ERR(fujitsu->bl_device)) + return PTR_ERR(fujitsu->bl_device); + max_brightness = fujitsu->max_brightness; + fujitsu->bl_device->props.max_brightness = max_brightness - 1; + fujitsu->bl_device->props.brightness = fujitsu->brightness_level; + } ret = platform_driver_register(&fujitsupf_driver); if (ret) @@ -1035,7 +1050,8 @@ fail_hotkey: fail_backlight: - backlight_device_unregister(fujitsu->bl_device); + if (fujitsu->bl_device) + backlight_device_unregister(fujitsu->bl_device); fail_platform_device2: @@ -1062,7 +1078,8 @@ static void __exit fujitsu_cleanup(void) &fujitsupf_attribute_group); platform_device_unregister(fujitsu->pf_device); platform_driver_unregister(&fujitsupf_driver); - backlight_device_unregister(fujitsu->bl_device); + if (fujitsu->bl_device) + backlight_device_unregister(fujitsu->bl_device); acpi_bus_unregister_driver(&acpi_fujitsu_driver); diff --git a/drivers/misc/ics932s401.c b/drivers/misc/ics932s401.c new file mode 100644 index 00000000000..6e43ab4231a --- /dev/null +++ b/drivers/misc/ics932s401.c @@ -0,0 +1,515 @@ +/* + * A driver for the Integrated Circuits ICS932S401 + * Copyright (C) 2008 IBM + * + * Author: Darrick J. Wong <djwong@us.ibm.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/module.h> +#include <linux/jiffies.h> +#include <linux/i2c.h> +#include <linux/err.h> +#include <linux/mutex.h> +#include <linux/delay.h> +#include <linux/log2.h> + +/* Addresses to scan */ +static const unsigned short normal_i2c[] = { 0x69, I2C_CLIENT_END }; + +/* Insmod parameters */ +I2C_CLIENT_INSMOD_1(ics932s401); + +/* ICS932S401 registers */ +#define ICS932S401_REG_CFG2 0x01 +#define ICS932S401_CFG1_SPREAD 0x01 +#define ICS932S401_REG_CFG7 0x06 +#define ICS932S401_FS_MASK 0x07 +#define ICS932S401_REG_VENDOR_REV 0x07 +#define ICS932S401_VENDOR 1 +#define ICS932S401_VENDOR_MASK 0x0F +#define ICS932S401_REV 4 +#define ICS932S401_REV_SHIFT 4 +#define ICS932S401_REG_DEVICE 0x09 +#define ICS932S401_DEVICE 11 +#define ICS932S401_REG_CTRL 0x0A +#define ICS932S401_MN_ENABLED 0x80 +#define ICS932S401_CPU_ALT 0x04 +#define ICS932S401_SRC_ALT 0x08 +#define ICS932S401_REG_CPU_M_CTRL 0x0B +#define ICS932S401_M_MASK 0x3F +#define ICS932S401_REG_CPU_N_CTRL 0x0C +#define ICS932S401_REG_CPU_SPREAD1 0x0D +#define ICS932S401_REG_CPU_SPREAD2 0x0E +#define ICS932S401_SPREAD_MASK 0x7FFF +#define ICS932S401_REG_SRC_M_CTRL 0x0F +#define ICS932S401_REG_SRC_N_CTRL 0x10 +#define ICS932S401_REG_SRC_SPREAD1 0x11 +#define ICS932S401_REG_SRC_SPREAD2 0x12 +#define ICS932S401_REG_CPU_DIVISOR 0x13 +#define ICS932S401_CPU_DIVISOR_SHIFT 4 +#define ICS932S401_REG_PCISRC_DIVISOR 0x14 +#define ICS932S401_SRC_DIVISOR_MASK 0x0F +#define ICS932S401_PCI_DIVISOR_SHIFT 4 + +/* Base clock is 14.318MHz */ +#define BASE_CLOCK 14318 + +#define NUM_REGS 21 +#define NUM_MIRRORED_REGS 15 + +static int regs_to_copy[NUM_MIRRORED_REGS] = { + ICS932S401_REG_CFG2, + ICS932S401_REG_CFG7, + ICS932S401_REG_VENDOR_REV, + ICS932S401_REG_DEVICE, + ICS932S401_REG_CTRL, + ICS932S401_REG_CPU_M_CTRL, + ICS932S401_REG_CPU_N_CTRL, + ICS932S401_REG_CPU_SPREAD1, + ICS932S401_REG_CPU_SPREAD2, + ICS932S401_REG_SRC_M_CTRL, + ICS932S401_REG_SRC_N_CTRL, + ICS932S401_REG_SRC_SPREAD1, + ICS932S401_REG_SRC_SPREAD2, + ICS932S401_REG_CPU_DIVISOR, + ICS932S401_REG_PCISRC_DIVISOR, +}; + +/* How often do we reread sensors values? (In jiffies) */ +#define SENSOR_REFRESH_INTERVAL (2 * HZ) + +/* How often do we reread sensor limit values? (In jiffies) */ +#define LIMIT_REFRESH_INTERVAL (60 * HZ) + +struct ics932s401_data { + struct attribute_group attrs; + struct mutex lock; + char sensors_valid; + unsigned long sensors_last_updated; /* In jiffies */ + + u8 regs[NUM_REGS]; +}; + +static int ics932s401_probe(struct i2c_client *client, + const struct i2c_device_id *id); +static int ics932s401_detect(struct i2c_client *client, int kind, + struct i2c_board_info *info); +static int ics932s401_remove(struct i2c_client *client); + +static const struct i2c_device_id ics932s401_id[] = { + { "ics932s401", ics932s401 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, ics932s401_id); + +static struct i2c_driver ics932s401_driver = { + .class = I2C_CLASS_HWMON, + .driver = { + .name = "ics932s401", + }, + .probe = ics932s401_probe, + .remove = ics932s401_remove, + .id_table = ics932s401_id, + .detect = ics932s401_detect, + .address_data = &addr_data, +}; + +static struct ics932s401_data *ics932s401_update_device(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct ics932s401_data *data = i2c_get_clientdata(client); + unsigned long local_jiffies = jiffies; + int i, temp; + + mutex_lock(&data->lock); + if (time_before(local_jiffies, data->sensors_last_updated + + SENSOR_REFRESH_INTERVAL) + && data->sensors_valid) + goto out; + + /* + * Each register must be read as a word and then right shifted 8 bits. + * Not really sure why this is; setting the "byte count programming" + * register to 1 does not fix this problem. + */ + for (i = 0; i < NUM_MIRRORED_REGS; i++) { + temp = i2c_smbus_read_word_data(client, regs_to_copy[i]); + data->regs[regs_to_copy[i]] = temp >> 8; + } + + data->sensors_last_updated = local_jiffies; + data->sensors_valid = 1; + +out: + mutex_unlock(&data->lock); + return data; +} + +static ssize_t show_spread_enabled(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct ics932s401_data *data = ics932s401_update_device(dev); + + if (data->regs[ICS932S401_REG_CFG2] & ICS932S401_CFG1_SPREAD) + return sprintf(buf, "1\n"); + + return sprintf(buf, "0\n"); +} + +/* bit to cpu khz map */ +static const int fs_speeds[] = { + 266666, + 133333, + 200000, + 166666, + 333333, + 100000, + 400000, + 0, +}; + +/* clock divisor map */ +static const int divisors[] = {2, 3, 5, 15, 4, 6, 10, 30, 8, 12, 20, 60, 16, + 24, 40, 120}; + +/* Calculate CPU frequency from the M/N registers. */ +static int calculate_cpu_freq(struct ics932s401_data *data) +{ + int m, n, freq; + + m = data->regs[ICS932S401_REG_CPU_M_CTRL] & ICS932S401_M_MASK; + n = data->regs[ICS932S401_REG_CPU_N_CTRL]; + + /* Pull in bits 8 & 9 from the M register */ + n |= ((int)data->regs[ICS932S401_REG_CPU_M_CTRL] & 0x80) << 1; + n |= ((int)data->regs[ICS932S401_REG_CPU_M_CTRL] & 0x40) << 3; + + freq = BASE_CLOCK * (n + 8) / (m + 2); + freq /= divisors[data->regs[ICS932S401_REG_CPU_DIVISOR] >> + ICS932S401_CPU_DIVISOR_SHIFT]; + + return freq; +} + +static ssize_t show_cpu_clock(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct ics932s401_data *data = ics932s401_update_device(dev); + + return sprintf(buf, "%d\n", calculate_cpu_freq(data)); +} + +static ssize_t show_cpu_clock_sel(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct ics932s401_data *data = ics932s401_update_device(dev); + int freq; + + if (data->regs[ICS932S401_REG_CTRL] & ICS932S401_MN_ENABLED) + freq = calculate_cpu_freq(data); + else { + /* Freq is neatly wrapped up for us */ + int fid = data->regs[ICS932S401_REG_CFG7] & ICS932S401_FS_MASK; + freq = fs_speeds[fid]; + if (data->regs[ICS932S401_REG_CTRL] & ICS932S401_CPU_ALT) { + switch (freq) { + case 166666: + freq = 160000; + break; + case 333333: + freq = 320000; + break; + } + } + } + + return sprintf(buf, "%d\n", freq); +} + +/* Calculate SRC frequency from the M/N registers. */ +static int calculate_src_freq(struct ics932s401_data *data) +{ + int m, n, freq; + + m = data->regs[ICS932S401_REG_SRC_M_CTRL] & ICS932S401_M_MASK; + n = data->regs[ICS932S401_REG_SRC_N_CTRL]; + + /* Pull in bits 8 & 9 from the M register */ + n |= ((int)data->regs[ICS932S401_REG_SRC_M_CTRL] & 0x80) << 1; + n |= ((int)data->regs[ICS932S401_REG_SRC_M_CTRL] & 0x40) << 3; + + freq = BASE_CLOCK * (n + 8) / (m + 2); + freq /= divisors[data->regs[ICS932S401_REG_PCISRC_DIVISOR] & + ICS932S401_SRC_DIVISOR_MASK]; + + return freq; +} + +static ssize_t show_src_clock(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct ics932s401_data *data = ics932s401_update_device(dev); + + return sprintf(buf, "%d\n", calculate_src_freq(data)); +} + +static ssize_t show_src_clock_sel(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct ics932s401_data *data = ics932s401_update_device(dev); + int freq; + + if (data->regs[ICS932S401_REG_CTRL] & ICS932S401_MN_ENABLED) + freq = calculate_src_freq(data); + else + /* Freq is neatly wrapped up for us */ + if (data->regs[ICS932S401_REG_CTRL] & ICS932S401_CPU_ALT && + data->regs[ICS932S401_REG_CTRL] & ICS932S401_SRC_ALT) + freq = 96000; + else + freq = 100000; + + return sprintf(buf, "%d\n", freq); +} + +/* Calculate PCI frequency from the SRC M/N registers. */ +static int calculate_pci_freq(struct ics932s401_data *data) +{ + int m, n, freq; + + m = data->regs[ICS932S401_REG_SRC_M_CTRL] & ICS932S401_M_MASK; + n = data->regs[ICS932S401_REG_SRC_N_CTRL]; + + /* Pull in bits 8 & 9 from the M register */ + n |= ((int)data->regs[ICS932S401_REG_SRC_M_CTRL] & 0x80) << 1; + n |= ((int)data->regs[ICS932S401_REG_SRC_M_CTRL] & 0x40) << 3; + + freq = BASE_CLOCK * (n + 8) / (m + 2); + freq /= divisors[data->regs[ICS932S401_REG_PCISRC_DIVISOR] >> + ICS932S401_PCI_DIVISOR_SHIFT]; + + return freq; +} + +static ssize_t show_pci_clock(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct ics932s401_data *data = ics932s401_update_device(dev); + + return sprintf(buf, "%d\n", calculate_pci_freq(data)); +} + +static ssize_t show_pci_clock_sel(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct ics932s401_data *data = ics932s401_update_device(dev); + int freq; + + if (data->regs[ICS932S401_REG_CTRL] & ICS932S401_MN_ENABLED) + freq = calculate_pci_freq(data); + else + freq = 33333; + + return sprintf(buf, "%d\n", freq); +} + +static ssize_t show_value(struct device *dev, + struct device_attribute *devattr, + char *buf); + +static ssize_t show_spread(struct device *dev, + struct device_attribute *devattr, + char *buf); + +static DEVICE_ATTR(spread_enabled, S_IRUGO, show_spread_enabled, NULL); +static DEVICE_ATTR(cpu_clock_selection, S_IRUGO, show_cpu_clock_sel, NULL); +static DEVICE_ATTR(cpu_clock, S_IRUGO, show_cpu_clock, NULL); +static DEVICE_ATTR(src_clock_selection, S_IRUGO, show_src_clock_sel, NULL); +static DEVICE_ATTR(src_clock, S_IRUGO, show_src_clock, NULL); +static DEVICE_ATTR(pci_clock_selection, S_IRUGO, show_pci_clock_sel, NULL); +static DEVICE_ATTR(pci_clock, S_IRUGO, show_pci_clock, NULL); +static DEVICE_ATTR(usb_clock, S_IRUGO, show_value, NULL); +static DEVICE_ATTR(ref_clock, S_IRUGO, show_value, NULL); +static DEVICE_ATTR(cpu_spread, S_IRUGO, show_spread, NULL); +static DEVICE_ATTR(src_spread, S_IRUGO, show_spread, NULL); + +static struct attribute *ics932s401_attr[] = +{ + &dev_attr_spread_enabled.attr, + &dev_attr_cpu_clock_selection.attr, + &dev_attr_cpu_clock.attr, + &dev_attr_src_clock_selection.attr, + &dev_attr_src_clock.attr, + &dev_attr_pci_clock_selection.attr, + &dev_attr_pci_clock.attr, + &dev_attr_usb_clock.attr, + &dev_attr_ref_clock.attr, + &dev_attr_cpu_spread.attr, + &dev_attr_src_spread.attr, + NULL +}; + +static ssize_t show_value(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + int x; + + if (devattr == &dev_attr_usb_clock) + x = 48000; + else if (devattr == &dev_attr_ref_clock) + x = BASE_CLOCK; + else + BUG(); + + return sprintf(buf, "%d\n", x); +} + +static ssize_t show_spread(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct ics932s401_data *data = ics932s401_update_device(dev); + int reg; + unsigned long val; + + if (!(data->regs[ICS932S401_REG_CFG2] & ICS932S401_CFG1_SPREAD)) + return sprintf(buf, "0%%\n"); + + if (devattr == &dev_attr_src_spread) + reg = ICS932S401_REG_SRC_SPREAD1; + else if (devattr == &dev_attr_cpu_spread) + reg = ICS932S401_REG_CPU_SPREAD1; + else + BUG(); + + val = data->regs[reg] | (data->regs[reg + 1] << 8); + val &= ICS932S401_SPREAD_MASK; + + /* Scale 0..2^14 to -0.5. */ + val = 500000 * val / 16384; + return sprintf(buf, "-0.%lu%%\n", val); +} + +/* Return 0 if detection is successful, -ENODEV otherwise */ +static int ics932s401_detect(struct i2c_client *client, int kind, + struct i2c_board_info *info) +{ + struct i2c_adapter *adapter = client->adapter; + + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) + return -ENODEV; + + if (kind <= 0) { + int vendor, device, revision; + + vendor = i2c_smbus_read_word_data(client, + ICS932S401_REG_VENDOR_REV); + vendor >>= 8; + revision = vendor >> ICS932S401_REV_SHIFT; + vendor &= ICS932S401_VENDOR_MASK; + if (vendor != ICS932S401_VENDOR) + return -ENODEV; + + device = i2c_smbus_read_word_data(client, + ICS932S401_REG_DEVICE); + device >>= 8; + if (device != ICS932S401_DEVICE) + return -ENODEV; + + if (revision != ICS932S401_REV) + dev_info(&adapter->dev, "Unknown revision %d\n", + revision); + } else + dev_dbg(&adapter->dev, "detection forced\n"); + + strlcpy(info->type, "ics932s401", I2C_NAME_SIZE); + + return 0; +} + +static int ics932s401_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct ics932s401_data *data; + int err; + + data = kzalloc(sizeof(struct ics932s401_data), GFP_KERNEL); + if (!data) { + err = -ENOMEM; + goto exit; + } + + i2c_set_clientdata(client, data); + mutex_init(&data->lock); + + dev_info(&client->dev, "%s chip found\n", client->name); + + /* Register sysfs hooks */ + data->attrs.attrs = ics932s401_attr; + err = sysfs_create_group(&client->dev.kobj, &data->attrs); + if (err) + goto exit_free; + + return 0; + +exit_free: + kfree(data); +exit: + return err; +} + +static int ics932s401_remove(struct i2c_client *client) +{ + struct ics932s401_data *data = i2c_get_clientdata(client); + + sysfs_remove_group(&client->dev.kobj, &data->attrs); + kfree(data); + return 0; +} + +static int __init ics932s401_init(void) +{ + return i2c_add_driver(&ics932s401_driver); +} + +static void __exit ics932s401_exit(void) +{ + i2c_del_driver(&ics932s401_driver); +} + +MODULE_AUTHOR("Darrick J. Wong <djwong@us.ibm.com>"); +MODULE_DESCRIPTION("ICS932S401 driver"); +MODULE_LICENSE("GPL"); + +module_init(ics932s401_init); +module_exit(ics932s401_exit); + +/* IBM IntelliStation Z30 */ +MODULE_ALIAS("dmi:bvnIBM:*:rn9228:*"); +MODULE_ALIAS("dmi:bvnIBM:*:rn9232:*"); + +/* IBM x3650/x3550 */ +MODULE_ALIAS("dmi:bvnIBM:*:pnIBMSystemx3650*"); +MODULE_ALIAS("dmi:bvnIBM:*:pnIBMSystemx3550*"); diff --git a/drivers/misc/intel_menlow.c b/drivers/misc/intel_menlow.c index e00a2756e97..27b7662955b 100644 --- a/drivers/misc/intel_menlow.c +++ b/drivers/misc/intel_menlow.c @@ -52,6 +52,11 @@ MODULE_LICENSE("GPL"); #define MEMORY_ARG_CUR_BANDWIDTH 1 #define MEMORY_ARG_MAX_BANDWIDTH 0 +/* + * GTHS returning 'n' would mean that [0,n-1] states are supported + * In that case max_cstate would be n-1 + * GTHS returning '0' would mean that no bandwidth control states are supported + */ static int memory_get_int_max_bandwidth(struct thermal_cooling_device *cdev, unsigned long *max_state) { @@ -71,6 +76,9 @@ static int memory_get_int_max_bandwidth(struct thermal_cooling_device *cdev, if (ACPI_FAILURE(status)) return -EFAULT; + if (!value) + return -EINVAL; + *max_state = value - 1; return 0; } @@ -121,7 +129,7 @@ static int memory_set_cur_bandwidth(struct thermal_cooling_device *cdev, if (memory_get_int_max_bandwidth(cdev, &max_state)) return -EFAULT; - if (max_state < 0 || state > max_state) + if (state > max_state) return -EINVAL; arg_list.count = 1; diff --git a/drivers/misc/msi-laptop.c b/drivers/misc/msi-laptop.c index de898c6938f..759763d18e4 100644 --- a/drivers/misc/msi-laptop.c +++ b/drivers/misc/msi-laptop.c @@ -347,12 +347,16 @@ static int __init msi_init(void) /* Register backlight stuff */ - msibl_device = backlight_device_register("msi-laptop-bl", NULL, NULL, - &msibl_ops); - if (IS_ERR(msibl_device)) - return PTR_ERR(msibl_device); - - msibl_device->props.max_brightness = MSI_LCD_LEVEL_MAX-1; + if (acpi_video_backlight_support()) { + printk(KERN_INFO "MSI: Brightness ignored, must be controlled " + "by ACPI video driver\n"); + } else { + msibl_device = backlight_device_register("msi-laptop-bl", NULL, + NULL, &msibl_ops); + if (IS_ERR(msibl_device)) + return PTR_ERR(msibl_device); + msibl_device->props.max_brightness = MSI_LCD_LEVEL_MAX-1; + } ret = platform_driver_register(&msipf_driver); if (ret) diff --git a/drivers/misc/sony-laptop.c b/drivers/misc/sony-laptop.c index 06f07e19dc7..7bcb81002dc 100644 --- a/drivers/misc/sony-laptop.c +++ b/drivers/misc/sony-laptop.c @@ -1038,7 +1038,11 @@ static int sony_nc_add(struct acpi_device *device) goto outinput; } - if (ACPI_SUCCESS(acpi_get_handle(sony_nc_acpi_handle, "GBRT", &handle))) { + if (!acpi_video_backlight_support()) { + printk(KERN_INFO DRV_PFX "Sony: Brightness ignored, must be " + "controlled by ACPI video driver\n"); + } else if (ACPI_SUCCESS(acpi_get_handle(sony_nc_acpi_handle, "GBRT", + &handle))) { sony_backlight_device = backlight_device_register("sony", NULL, NULL, &sony_backlight_ops); diff --git a/drivers/misc/thinkpad_acpi.c b/drivers/misc/thinkpad_acpi.c index 4db1cf9078d..7a4a26b0edd 100644 --- a/drivers/misc/thinkpad_acpi.c +++ b/drivers/misc/thinkpad_acpi.c @@ -4932,16 +4932,25 @@ static int __init brightness_init(struct ibm_init_struct *iibm) */ b = tpacpi_check_std_acpi_brightness_support(); if (b > 0) { - if (thinkpad_id.vendor == PCI_VENDOR_ID_LENOVO) { - printk(TPACPI_NOTICE - "Lenovo BIOS switched to ACPI backlight " - "control mode\n"); - } - if (brightness_enable > 1) { - printk(TPACPI_NOTICE - "standard ACPI backlight interface " - "available, not loading native one...\n"); - return 1; + + if (acpi_video_backlight_support()) { + if (brightness_enable > 1) { + printk(TPACPI_NOTICE + "Standard ACPI backlight interface " + "available, not loading native one.\n"); + return 1; + } else if (brightness_enable == 1) { + printk(TPACPI_NOTICE + "Backlight control force enabled, even if standard " + "ACPI backlight interface is available\n"); + } + } else { + if (brightness_enable > 1) { + printk(TPACPI_NOTICE + "Standard ACPI backlight interface not " + "available, thinkpad_acpi native " + "brightness control enabled\n"); + } } } diff --git a/drivers/mtd/maps/cdb89712.c b/drivers/mtd/maps/cdb89712.c index e5059aa3c72..8d92d8db9a9 100644 --- a/drivers/mtd/maps/cdb89712.c +++ b/drivers/mtd/maps/cdb89712.c @@ -14,7 +14,18 @@ #include <linux/mtd/map.h> #include <linux/mtd/partitions.h> - +/* dynamic ioremap() areas */ +#define FLASH_START 0x00000000 +#define FLASH_SIZE 0x800000 +#define FLASH_WIDTH 4 + +#define SRAM_START 0x60000000 +#define SRAM_SIZE 0xc000 +#define SRAM_WIDTH 4 + +#define BOOTROM_START 0x70000000 +#define BOOTROM_SIZE 0x80 +#define BOOTROM_WIDTH 4 static struct mtd_info *flash_mtd; diff --git a/drivers/mtd/maps/h720x-flash.c b/drivers/mtd/maps/h720x-flash.c index 35fef655ccc..3b959fad1c4 100644 --- a/drivers/mtd/maps/h720x-flash.c +++ b/drivers/mtd/maps/h720x-flash.c @@ -24,8 +24,8 @@ static struct mtd_info *mymtd; static struct map_info h720x_map = { .name = "H720X", .bankwidth = 4, - .size = FLASH_SIZE, - .phys = FLASH_PHYS, + .size = H720X_FLASH_SIZE, + .phys = H720X_FLASH_PHYS, }; static struct mtd_partition h720x_partitions[] = { @@ -70,7 +70,7 @@ int __init h720x_mtd_init(void) char *part_type = NULL; - h720x_map.virt = ioremap(FLASH_PHYS, FLASH_SIZE); + h720x_map.virt = ioremap(h720x_map.phys, h720x_map.size); if (!h720x_map.virt) { printk(KERN_ERR "H720x-MTD: ioremap failed\n"); diff --git a/drivers/net/atl1e/atl1e_hw.c b/drivers/net/atl1e/atl1e_hw.c index 8cbc1b59bd6..4a770062011 100644 --- a/drivers/net/atl1e/atl1e_hw.c +++ b/drivers/net/atl1e/atl1e_hw.c @@ -163,9 +163,6 @@ int atl1e_read_mac_addr(struct atl1e_hw *hw) * atl1e_hash_mc_addr * purpose * set hash value for a multicast address - * hash calcu processing : - * 1. calcu 32bit CRC for multicast address - * 2. reverse crc with MSB to LSB */ u32 atl1e_hash_mc_addr(struct atl1e_hw *hw, u8 *mc_addr) { @@ -174,7 +171,6 @@ u32 atl1e_hash_mc_addr(struct atl1e_hw *hw, u8 *mc_addr) int i; crc32 = ether_crc_le(6, mc_addr); - crc32 = ~crc32; for (i = 0; i < 32; i++) value |= (((crc32 >> i) & 1) << (31 - i)); diff --git a/drivers/net/atlx/atl1.c b/drivers/net/atlx/atl1.c index 246d92b4263..aef403d299e 100644 --- a/drivers/net/atlx/atl1.c +++ b/drivers/net/atlx/atl1.c @@ -3404,14 +3404,8 @@ static void atl1_get_wol(struct net_device *netdev, { struct atl1_adapter *adapter = netdev_priv(netdev); - wol->supported = WAKE_UCAST | WAKE_MCAST | WAKE_BCAST | WAKE_MAGIC; + wol->supported = WAKE_MAGIC; wol->wolopts = 0; - if (adapter->wol & ATLX_WUFC_EX) - wol->wolopts |= WAKE_UCAST; - if (adapter->wol & ATLX_WUFC_MC) - wol->wolopts |= WAKE_MCAST; - if (adapter->wol & ATLX_WUFC_BC) - wol->wolopts |= WAKE_BCAST; if (adapter->wol & ATLX_WUFC_MAG) wol->wolopts |= WAKE_MAGIC; return; @@ -3422,15 +3416,10 @@ static int atl1_set_wol(struct net_device *netdev, { struct atl1_adapter *adapter = netdev_priv(netdev); - if (wol->wolopts & (WAKE_PHY | WAKE_ARP | WAKE_MAGICSECURE)) + if (wol->wolopts & (WAKE_PHY | WAKE_UCAST | WAKE_MCAST | WAKE_BCAST | + WAKE_ARP | WAKE_MAGICSECURE)) return -EOPNOTSUPP; adapter->wol = 0; - if (wol->wolopts & WAKE_UCAST) - adapter->wol |= ATLX_WUFC_EX; - if (wol->wolopts & WAKE_MCAST) - adapter->wol |= ATLX_WUFC_MC; - if (wol->wolopts & WAKE_BCAST) - adapter->wol |= ATLX_WUFC_BC; if (wol->wolopts & WAKE_MAGIC) adapter->wol |= ATLX_WUFC_MAG; return 0; diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c index 430d430bce2..d07e3f14895 100644 --- a/drivers/net/bnx2.c +++ b/drivers/net/bnx2.c @@ -7204,10 +7204,13 @@ static void poll_bnx2(struct net_device *dev) { struct bnx2 *bp = netdev_priv(dev); + int i; - disable_irq(bp->pdev->irq); - bnx2_interrupt(bp->pdev->irq, dev); - enable_irq(bp->pdev->irq); + for (i = 0; i < bp->irq_nvecs; i++) { + disable_irq(bp->irq_tbl[i].vector); + bnx2_interrupt(bp->irq_tbl[i].vector, &bp->bnx2_napi[i]); + enable_irq(bp->irq_tbl[i].vector); + } } #endif diff --git a/drivers/net/cxgb3/cxgb3_main.c b/drivers/net/cxgb3/cxgb3_main.c index 1ace41a13ac..2c341f83d32 100644 --- a/drivers/net/cxgb3/cxgb3_main.c +++ b/drivers/net/cxgb3/cxgb3_main.c @@ -1307,8 +1307,10 @@ static void get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info) u32 fw_vers = 0; u32 tp_vers = 0; + spin_lock(&adapter->stats_lock); t3_get_fw_version(adapter, &fw_vers); t3_get_tp_version(adapter, &tp_vers); + spin_unlock(&adapter->stats_lock); strcpy(info->driver, DRV_NAME); strcpy(info->version, DRV_VERSION); @@ -2699,7 +2701,7 @@ static void set_nqsets(struct adapter *adap) int hwports = adap->params.nports; int nqsets = SGE_QSETS; - if (adap->params.rev > 0) { + if (adap->params.rev > 0 && adap->flags & USING_MSIX) { if (hwports == 2 && (hwports * nqsets > SGE_QSETS || num_cpus >= nqsets / hwports)) diff --git a/drivers/net/cxgb3/t3_hw.c b/drivers/net/cxgb3/t3_hw.c index 968f64be374..9a0898b0dbc 100644 --- a/drivers/net/cxgb3/t3_hw.c +++ b/drivers/net/cxgb3/t3_hw.c @@ -572,7 +572,7 @@ struct t3_vpd { u32 pad; /* for multiple-of-4 sizing and alignment */ }; -#define EEPROM_MAX_POLL 4 +#define EEPROM_MAX_POLL 40 #define EEPROM_STAT_ADDR 0x4000 #define VPD_BASE 0xc00 @@ -3690,6 +3690,12 @@ int t3_prep_adapter(struct adapter *adapter, const struct adapter_info *ai, ; pti = &port_types[adapter->params.vpd.port_type[j]]; + if (!pti->phy_prep) { + CH_ALERT(adapter, "Invalid port type index %d\n", + adapter->params.vpd.port_type[j]); + return -EINVAL; + } + ret = pti->phy_prep(&p->phy, adapter, ai->phy_base_addr + j, ai->mdio_ops); if (ret) diff --git a/drivers/net/e100.c b/drivers/net/e100.c index 3d69fae781c..e8bfcce6b31 100644 --- a/drivers/net/e100.c +++ b/drivers/net/e100.c @@ -166,7 +166,7 @@ #define DRV_NAME "e100" #define DRV_EXT "-NAPI" -#define DRV_VERSION "3.5.23-k4"DRV_EXT +#define DRV_VERSION "3.5.23-k6"DRV_EXT #define DRV_DESCRIPTION "Intel(R) PRO/100 Network Driver" #define DRV_COPYRIGHT "Copyright(c) 1999-2006 Intel Corporation" #define PFX DRV_NAME ": " @@ -1804,7 +1804,7 @@ static int e100_rx_alloc_skb(struct nic *nic, struct rx *rx) struct rfd *prev_rfd = (struct rfd *)rx->prev->skb->data; put_unaligned_le32(rx->dma_addr, &prev_rfd->link); pci_dma_sync_single_for_device(nic->pdev, rx->prev->dma_addr, - sizeof(struct rfd), PCI_DMA_TODEVICE); + sizeof(struct rfd), PCI_DMA_BIDIRECTIONAL); } return 0; @@ -1823,7 +1823,7 @@ static int e100_rx_indicate(struct nic *nic, struct rx *rx, /* Need to sync before taking a peek at cb_complete bit */ pci_dma_sync_single_for_cpu(nic->pdev, rx->dma_addr, - sizeof(struct rfd), PCI_DMA_FROMDEVICE); + sizeof(struct rfd), PCI_DMA_BIDIRECTIONAL); rfd_status = le16_to_cpu(rfd->status); DPRINTK(RX_STATUS, DEBUG, "status=0x%04X\n", rfd_status); @@ -1850,7 +1850,7 @@ static int e100_rx_indicate(struct nic *nic, struct rx *rx, /* Get data */ pci_unmap_single(nic->pdev, rx->dma_addr, - RFD_BUF_LEN, PCI_DMA_FROMDEVICE); + RFD_BUF_LEN, PCI_DMA_BIDIRECTIONAL); /* If this buffer has the el bit, but we think the receiver * is still running, check to see if it really stopped while @@ -1943,7 +1943,7 @@ static void e100_rx_clean(struct nic *nic, unsigned int *work_done, new_before_last_rfd->command |= cpu_to_le16(cb_el); pci_dma_sync_single_for_device(nic->pdev, new_before_last_rx->dma_addr, sizeof(struct rfd), - PCI_DMA_TODEVICE); + PCI_DMA_BIDIRECTIONAL); /* Now that we have a new stopping point, we can clear the old * stopping point. We must sync twice to get the proper @@ -1951,11 +1951,11 @@ static void e100_rx_clean(struct nic *nic, unsigned int *work_done, old_before_last_rfd->command &= ~cpu_to_le16(cb_el); pci_dma_sync_single_for_device(nic->pdev, old_before_last_rx->dma_addr, sizeof(struct rfd), - PCI_DMA_TODEVICE); + PCI_DMA_BIDIRECTIONAL); old_before_last_rfd->size = cpu_to_le16(VLAN_ETH_FRAME_LEN); pci_dma_sync_single_for_device(nic->pdev, old_before_last_rx->dma_addr, sizeof(struct rfd), - PCI_DMA_TODEVICE); + PCI_DMA_BIDIRECTIONAL); } if(restart_required) { @@ -1978,7 +1978,7 @@ static void e100_rx_clean_list(struct nic *nic) for(rx = nic->rxs, i = 0; i < count; rx++, i++) { if(rx->skb) { pci_unmap_single(nic->pdev, rx->dma_addr, - RFD_BUF_LEN, PCI_DMA_FROMDEVICE); + RFD_BUF_LEN, PCI_DMA_BIDIRECTIONAL); dev_kfree_skb(rx->skb); } } @@ -2021,7 +2021,7 @@ static int e100_rx_alloc_list(struct nic *nic) before_last->command |= cpu_to_le16(cb_el); before_last->size = 0; pci_dma_sync_single_for_device(nic->pdev, rx->dma_addr, - sizeof(struct rfd), PCI_DMA_TODEVICE); + sizeof(struct rfd), PCI_DMA_BIDIRECTIONAL); nic->rx_to_use = nic->rx_to_clean = nic->rxs; nic->ru_running = RU_SUSPENDED; @@ -2222,7 +2222,7 @@ static int e100_loopback_test(struct nic *nic, enum loopback loopback_mode) msleep(10); pci_dma_sync_single_for_cpu(nic->pdev, nic->rx_to_clean->dma_addr, - RFD_BUF_LEN, PCI_DMA_FROMDEVICE); + RFD_BUF_LEN, PCI_DMA_BIDIRECTIONAL); if(memcmp(nic->rx_to_clean->skb->data + sizeof(struct rfd), skb->data, ETH_DATA_LEN)) diff --git a/drivers/net/e1000/e1000_ethtool.c b/drivers/net/e1000/e1000_ethtool.c index 6a3893acfe0..c854c96f5ab 100644 --- a/drivers/net/e1000/e1000_ethtool.c +++ b/drivers/net/e1000/e1000_ethtool.c @@ -1774,7 +1774,8 @@ static void e1000_get_wol(struct net_device *netdev, /* this function will set ->supported = 0 and return 1 if wol is not * supported by this hardware */ - if (e1000_wol_exclusion(adapter, wol)) + if (e1000_wol_exclusion(adapter, wol) || + !device_can_wakeup(&adapter->pdev->dev)) return; /* apply any specific unsupported masks here */ @@ -1811,7 +1812,8 @@ static int e1000_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol) if (wol->wolopts & (WAKE_PHY | WAKE_ARP | WAKE_MAGICSECURE)) return -EOPNOTSUPP; - if (e1000_wol_exclusion(adapter, wol)) + if (e1000_wol_exclusion(adapter, wol) || + !device_can_wakeup(&adapter->pdev->dev)) return wol->wolopts ? -EOPNOTSUPP : 0; switch (hw->device_id) { @@ -1838,6 +1840,8 @@ static int e1000_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol) if (wol->wolopts & WAKE_MAGIC) adapter->wol |= E1000_WUFC_MAG; + device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol); + return 0; } diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c index fac82152e4c..872799b746f 100644 --- a/drivers/net/e1000/e1000_main.c +++ b/drivers/net/e1000/e1000_main.c @@ -1179,6 +1179,7 @@ static int __devinit e1000_probe(struct pci_dev *pdev, /* initialize the wol settings based on the eeprom settings */ adapter->wol = adapter->eeprom_wol; + device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol); /* print bus type/speed/width info */ DPRINTK(PROBE, INFO, "(PCI%s:%s:%s) ", diff --git a/drivers/net/e1000e/e1000.h b/drivers/net/e1000e/e1000.h index c55de1c027a..c55fd6fdb91 100644 --- a/drivers/net/e1000e/e1000.h +++ b/drivers/net/e1000e/e1000.h @@ -299,6 +299,7 @@ struct e1000_adapter { unsigned long led_status; unsigned int flags; + unsigned int flags2; struct work_struct downshift_task; struct work_struct update_phy_task; }; @@ -306,6 +307,7 @@ struct e1000_adapter { struct e1000_info { enum e1000_mac_type mac; unsigned int flags; + unsigned int flags2; u32 pba; s32 (*get_variants)(struct e1000_adapter *); struct e1000_mac_operations *mac_ops; @@ -347,6 +349,9 @@ struct e1000_info { #define FLAG_RX_RESTART_NOW (1 << 30) #define FLAG_MSI_TEST_FAILED (1 << 31) +/* CRC Stripping defines */ +#define FLAG2_CRC_STRIPPING (1 << 0) + #define E1000_RX_DESC_PS(R, i) \ (&(((union e1000_rx_desc_packet_split *)((R).desc))[i])) #define E1000_GET_DESC(R, i, type) (&(((struct type *)((R).desc))[i])) diff --git a/drivers/net/e1000e/ethtool.c b/drivers/net/e1000e/ethtool.c index 70c11c811a0..62421ce9631 100644 --- a/drivers/net/e1000e/ethtool.c +++ b/drivers/net/e1000e/ethtool.c @@ -1713,7 +1713,8 @@ static void e1000_get_wol(struct net_device *netdev, wol->supported = 0; wol->wolopts = 0; - if (!(adapter->flags & FLAG_HAS_WOL)) + if (!(adapter->flags & FLAG_HAS_WOL) || + !device_can_wakeup(&adapter->pdev->dev)) return; wol->supported = WAKE_UCAST | WAKE_MCAST | @@ -1751,7 +1752,8 @@ static int e1000_set_wol(struct net_device *netdev, if (wol->wolopts & WAKE_MAGICSECURE) return -EOPNOTSUPP; - if (!(adapter->flags & FLAG_HAS_WOL)) + if (!(adapter->flags & FLAG_HAS_WOL) || + !device_can_wakeup(&adapter->pdev->dev)) return wol->wolopts ? -EOPNOTSUPP : 0; /* these settings will always override what we currently have */ @@ -1770,6 +1772,8 @@ static int e1000_set_wol(struct net_device *netdev, if (wol->wolopts & WAKE_ARP) adapter->wol |= E1000_WUFC_ARP; + device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol); + return 0; } diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c index abd492b7336..91795f78c3e 100644 --- a/drivers/net/e1000e/netdev.c +++ b/drivers/net/e1000e/netdev.c @@ -499,6 +499,10 @@ static bool e1000_clean_rx_irq(struct e1000_adapter *adapter, goto next_desc; } + /* adjust length to remove Ethernet CRC */ + if (!(adapter->flags2 & FLAG2_CRC_STRIPPING)) + length -= 4; + total_rx_bytes += length; total_rx_packets++; @@ -804,6 +808,10 @@ static bool e1000_clean_rx_irq_ps(struct e1000_adapter *adapter, pci_dma_sync_single_for_device(pdev, ps_page->dma, PAGE_SIZE, PCI_DMA_FROMDEVICE); + /* remove the CRC */ + if (!(adapter->flags2 & FLAG2_CRC_STRIPPING)) + l1 -= 4; + skb_put(skb, l1); goto copydone; } /* if */ @@ -825,6 +833,12 @@ static bool e1000_clean_rx_irq_ps(struct e1000_adapter *adapter, skb->truesize += length; } + /* strip the ethernet crc, problem is we're using pages now so + * this whole operation can get a little cpu intensive + */ + if (!(adapter->flags2 & FLAG2_CRC_STRIPPING)) + pskb_trim(skb, skb->len - 4); + copydone: total_rx_bytes += skb->len; total_rx_packets++; @@ -2301,8 +2315,12 @@ static void e1000_setup_rctl(struct e1000_adapter *adapter) else rctl |= E1000_RCTL_LPE; - /* Enable hardware CRC frame stripping */ - rctl |= E1000_RCTL_SECRC; + /* Some systems expect that the CRC is included in SMBUS traffic. The + * hardware strips the CRC before sending to both SMBUS (BMC) and to + * host memory when this is enabled + */ + if (adapter->flags2 & FLAG2_CRC_STRIPPING) + rctl |= E1000_RCTL_SECRC; /* Setup buffer sizes */ rctl &= ~E1000_RCTL_SZ_4096; @@ -4766,6 +4784,7 @@ static int __devinit e1000_probe(struct pci_dev *pdev, adapter->ei = ei; adapter->pba = ei->pba; adapter->flags = ei->flags; + adapter->flags2 = ei->flags2; adapter->hw.adapter = adapter; adapter->hw.mac.type = ei->mac; adapter->msg_enable = (1 << NETIF_MSG_DRV | NETIF_MSG_PROBE) - 1; @@ -4970,6 +4989,7 @@ static int __devinit e1000_probe(struct pci_dev *pdev, /* initialize the wol settings based on the eeprom settings */ adapter->wol = adapter->eeprom_wol; + device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol); /* reset the hardware with the new settings */ e1000e_reset(adapter); @@ -5008,6 +5028,7 @@ err_hw_init: err_sw_init: if (adapter->hw.flash_address) iounmap(adapter->hw.flash_address); + e1000e_reset_interrupt_capability(adapter); err_flashmap: iounmap(adapter->hw.hw_addr); err_ioremap: diff --git a/drivers/net/e1000e/param.c b/drivers/net/e1000e/param.c index 77a3d7207a5..e909f96698e 100644 --- a/drivers/net/e1000e/param.c +++ b/drivers/net/e1000e/param.c @@ -151,6 +151,16 @@ E1000_PARAM(KumeranLockLoss, "Enable Kumeran lock loss workaround"); */ E1000_PARAM(WriteProtectNVM, "Write-protect NVM [WARNING: disabling this can lead to corrupted NVM]"); +/* + * Enable CRC Stripping + * + * Valid Range: 0, 1 + * + * Default Value: 1 (enabled) + */ +E1000_PARAM(CrcStripping, "Enable CRC Stripping, disable if your BMC needs " \ + "the CRC"); + struct e1000_option { enum { enable_option, range_option, list_option } type; const char *name; @@ -404,6 +414,21 @@ void __devinit e1000e_check_options(struct e1000_adapter *adapter) adapter->flags |= FLAG_SMART_POWER_DOWN; } } + { /* CRC Stripping */ + const struct e1000_option opt = { + .type = enable_option, + .name = "CRC Stripping", + .err = "defaulting to enabled", + .def = OPTION_ENABLED + }; + + if (num_CrcStripping > bd) { + unsigned int crc_stripping = CrcStripping[bd]; + e1000_validate_option(&crc_stripping, &opt, adapter); + if (crc_stripping == OPTION_ENABLED) + adapter->flags2 |= FLAG2_CRC_STRIPPING; + } + } { /* Kumeran Lock Loss Workaround */ const struct e1000_option opt = { .type = enable_option, diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c index 83a5cb6aa23..c4af949bf86 100644 --- a/drivers/net/gianfar.c +++ b/drivers/net/gianfar.c @@ -1407,6 +1407,10 @@ static int gfar_clean_tx_ring(struct net_device *dev) if (bdp->status & TXBD_DEF) dev->stats.collisions++; + /* Unmap the DMA memory */ + dma_unmap_single(&priv->dev->dev, bdp->bufPtr, + bdp->length, DMA_TO_DEVICE); + /* Free the sk buffer associated with this TxBD */ dev_kfree_skb_irq(priv->tx_skbuff[priv->skb_dirtytx]); @@ -1666,6 +1670,9 @@ int gfar_clean_rx_ring(struct net_device *dev, int rx_work_limit) skb = priv->rx_skbuff[priv->skb_currx]; + dma_unmap_single(&priv->dev->dev, bdp->bufPtr, + priv->rx_buffer_size, DMA_FROM_DEVICE); + /* We drop the frame if we failed to allocate a new buffer */ if (unlikely(!newskb || !(bdp->status & RXBD_LAST) || bdp->status & RXBD_ERR)) { @@ -1674,14 +1681,8 @@ int gfar_clean_rx_ring(struct net_device *dev, int rx_work_limit) if (unlikely(!newskb)) newskb = skb; - if (skb) { - dma_unmap_single(&priv->dev->dev, - bdp->bufPtr, - priv->rx_buffer_size, - DMA_FROM_DEVICE); - + if (skb) dev_kfree_skb_any(skb); - } } else { /* Increment the number of packets */ dev->stats.rx_packets++; diff --git a/drivers/net/igb/igb_ethtool.c b/drivers/net/igb/igb_ethtool.c index 58906c984be..89964fa739a 100644 --- a/drivers/net/igb/igb_ethtool.c +++ b/drivers/net/igb/igb_ethtool.c @@ -1776,7 +1776,8 @@ static void igb_get_wol(struct net_device *netdev, struct ethtool_wolinfo *wol) /* this function will set ->supported = 0 and return 1 if wol is not * supported by this hardware */ - if (igb_wol_exclusion(adapter, wol)) + if (igb_wol_exclusion(adapter, wol) || + !device_can_wakeup(&adapter->pdev->dev)) return; /* apply any specific unsupported masks here */ @@ -1805,7 +1806,8 @@ static int igb_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol) if (wol->wolopts & (WAKE_PHY | WAKE_ARP | WAKE_MAGICSECURE)) return -EOPNOTSUPP; - if (igb_wol_exclusion(adapter, wol)) + if (igb_wol_exclusion(adapter, wol) || + !device_can_wakeup(&adapter->pdev->dev)) return wol->wolopts ? -EOPNOTSUPP : 0; switch (hw->device_id) { @@ -1825,6 +1827,8 @@ static int igb_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol) if (wol->wolopts & WAKE_MAGIC) adapter->wol |= E1000_WUFC_MAG; + device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol); + return 0; } diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c index 1f397cd9941..1cbae85b142 100644 --- a/drivers/net/igb/igb_main.c +++ b/drivers/net/igb/igb_main.c @@ -1019,10 +1019,9 @@ static int __devinit igb_probe(struct pci_dev *pdev, state &= ~PCIE_LINK_STATE_L0S; pci_write_config_word(us_dev, pos + PCI_EXP_LNKCTL, state); - printk(KERN_INFO "Disabling ASPM L0s upstream switch " - "port %x:%x.%x\n", us_dev->bus->number, - PCI_SLOT(us_dev->devfn), - PCI_FUNC(us_dev->devfn)); + dev_info(&pdev->dev, + "Disabling ASPM L0s upstream switch port %s\n", + pci_name(us_dev)); } default: break; @@ -1244,6 +1243,7 @@ static int __devinit igb_probe(struct pci_dev *pdev, /* initialize the wol settings based on the eeprom settings */ adapter->wol = adapter->eeprom_wol; + device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol); /* reset the hardware with the new settings */ igb_reset(adapter); diff --git a/drivers/net/mlx4/en_netdev.c b/drivers/net/mlx4/en_netdev.c index a3f732418c4..96e709d6440 100644 --- a/drivers/net/mlx4/en_netdev.c +++ b/drivers/net/mlx4/en_netdev.c @@ -656,10 +656,10 @@ static int mlx4_en_start_port(struct net_device *dev) /* Configure port */ err = mlx4_SET_PORT_general(mdev->dev, priv->port, priv->rx_skb_size + ETH_FCS_LEN, - mdev->profile.tx_pause, - mdev->profile.tx_ppp, - mdev->profile.rx_pause, - mdev->profile.rx_ppp); + priv->prof->tx_pause, + priv->prof->tx_ppp, + priv->prof->rx_pause, + priv->prof->rx_ppp); if (err) { mlx4_err(mdev, "Failed setting port general configurations" " for port %d, with error %d\n", priv->port, err); diff --git a/drivers/net/mlx4/en_params.c b/drivers/net/mlx4/en_params.c index c2e69b1bcd0..95706ee1c01 100644 --- a/drivers/net/mlx4/en_params.c +++ b/drivers/net/mlx4/en_params.c @@ -90,6 +90,7 @@ MLX4_EN_PARM_INT(rx_ring_size2, MLX4_EN_AUTO_CONF, "Rx ring size for port 2"); int mlx4_en_get_profile(struct mlx4_en_dev *mdev) { struct mlx4_en_profile *params = &mdev->profile; + int i; params->rx_moder_cnt = min_t(int, rx_moder_cnt, MLX4_EN_AUTO_CONF); params->rx_moder_time = min_t(int, rx_moder_time, MLX4_EN_AUTO_CONF); @@ -97,11 +98,13 @@ int mlx4_en_get_profile(struct mlx4_en_dev *mdev) params->rss_xor = (rss_xor != 0); params->rss_mask = rss_mask & 0x1f; params->num_lro = min_t(int, num_lro , MLX4_EN_MAX_LRO_DESCRIPTORS); - params->rx_pause = pprx; - params->rx_ppp = pfcrx; - params->tx_pause = pptx; - params->tx_ppp = pfctx; - if (params->rx_ppp || params->tx_ppp) { + for (i = 1; i <= MLX4_MAX_PORTS; i++) { + params->prof[i].rx_pause = pprx; + params->prof[i].rx_ppp = pfcrx; + params->prof[i].tx_pause = pptx; + params->prof[i].tx_ppp = pfctx; + } + if (pfcrx || pfctx) { params->prof[1].tx_ring_num = MLX4_EN_TX_RING_NUM; params->prof[2].tx_ring_num = MLX4_EN_TX_RING_NUM; } else { @@ -407,14 +410,14 @@ static int mlx4_en_set_pauseparam(struct net_device *dev, struct mlx4_en_dev *mdev = priv->mdev; int err; - mdev->profile.tx_pause = pause->tx_pause != 0; - mdev->profile.rx_pause = pause->rx_pause != 0; + priv->prof->tx_pause = pause->tx_pause != 0; + priv->prof->rx_pause = pause->rx_pause != 0; err = mlx4_SET_PORT_general(mdev->dev, priv->port, priv->rx_skb_size + ETH_FCS_LEN, - mdev->profile.tx_pause, - mdev->profile.tx_ppp, - mdev->profile.rx_pause, - mdev->profile.rx_ppp); + priv->prof->tx_pause, + priv->prof->tx_ppp, + priv->prof->rx_pause, + priv->prof->rx_ppp); if (err) mlx4_err(mdev, "Failed setting pause params to\n"); @@ -425,10 +428,9 @@ static void mlx4_en_get_pauseparam(struct net_device *dev, struct ethtool_pauseparam *pause) { struct mlx4_en_priv *priv = netdev_priv(dev); - struct mlx4_en_dev *mdev = priv->mdev; - pause->tx_pause = mdev->profile.tx_pause; - pause->rx_pause = mdev->profile.rx_pause; + pause->tx_pause = priv->prof->tx_pause; + pause->rx_pause = priv->prof->rx_pause; } static void mlx4_en_get_ringparam(struct net_device *dev, diff --git a/drivers/net/mlx4/mlx4.h b/drivers/net/mlx4/mlx4.h index fa431fad0ee..56a2e213fe6 100644 --- a/drivers/net/mlx4/mlx4.h +++ b/drivers/net/mlx4/mlx4.h @@ -87,6 +87,9 @@ enum { #ifdef CONFIG_MLX4_DEBUG extern int mlx4_debug_level; +#else /* CONFIG_MLX4_DEBUG */ +#define mlx4_debug_level (0) +#endif /* CONFIG_MLX4_DEBUG */ #define mlx4_dbg(mdev, format, arg...) \ do { \ @@ -94,12 +97,6 @@ extern int mlx4_debug_level; dev_printk(KERN_DEBUG, &mdev->pdev->dev, format, ## arg); \ } while (0) -#else /* CONFIG_MLX4_DEBUG */ - -#define mlx4_dbg(mdev, format, arg...) do { (void) mdev; } while (0) - -#endif /* CONFIG_MLX4_DEBUG */ - #define mlx4_err(mdev, format, arg...) \ dev_err(&mdev->pdev->dev, format, ## arg) #define mlx4_info(mdev, format, arg...) \ diff --git a/drivers/net/mlx4/mlx4_en.h b/drivers/net/mlx4/mlx4_en.h index 11fb17c6e97..98ddc0811f9 100644 --- a/drivers/net/mlx4/mlx4_en.h +++ b/drivers/net/mlx4/mlx4_en.h @@ -322,6 +322,10 @@ struct mlx4_en_port_profile { u32 rx_ring_num; u32 tx_ring_size; u32 rx_ring_size; + u8 rx_pause; + u8 rx_ppp; + u8 tx_pause; + u8 tx_ppp; }; struct mlx4_en_profile { @@ -333,10 +337,6 @@ struct mlx4_en_profile { int rx_moder_cnt; int rx_moder_time; int auto_moder; - u8 rx_pause; - u8 rx_ppp; - u8 tx_pause; - u8 tx_ppp; u8 no_reset; struct mlx4_en_port_profile prof[MLX4_MAX_PORTS + 1]; }; diff --git a/drivers/net/myri10ge/myri10ge.c b/drivers/net/myri10ge/myri10ge.c index a5f428bcc0e..b3786709730 100644 --- a/drivers/net/myri10ge/myri10ge.c +++ b/drivers/net/myri10ge/myri10ge.c @@ -75,7 +75,7 @@ #include "myri10ge_mcp.h" #include "myri10ge_mcp_gen_header.h" -#define MYRI10GE_VERSION_STR "1.4.3-1.375" +#define MYRI10GE_VERSION_STR "1.4.3-1.378" MODULE_DESCRIPTION("Myricom 10G driver (10GbE)"); MODULE_AUTHOR("Maintainer: help@myri.com"); @@ -1393,6 +1393,7 @@ myri10ge_tx_done(struct myri10ge_slice_state *ss, int mcp_index) if (tx->req == tx->done) { tx->queue_active = 0; put_be32(htonl(1), tx->send_stop); + mb(); mmiowb(); } __netif_tx_unlock(dev_queue); @@ -2865,6 +2866,7 @@ again: if ((mgp->dev->real_num_tx_queues > 1) && tx->queue_active == 0) { tx->queue_active = 1; put_be32(htonl(1), tx->send_go); + mb(); mmiowb(); } tx->pkt_start++; diff --git a/drivers/net/niu.c b/drivers/net/niu.c index 9acb5d70a3a..1b6f548c441 100644 --- a/drivers/net/niu.c +++ b/drivers/net/niu.c @@ -33,8 +33,8 @@ #define DRV_MODULE_NAME "niu" #define PFX DRV_MODULE_NAME ": " -#define DRV_MODULE_VERSION "0.9" -#define DRV_MODULE_RELDATE "May 4, 2008" +#define DRV_MODULE_VERSION "1.0" +#define DRV_MODULE_RELDATE "Nov 14, 2008" static char version[] __devinitdata = DRV_MODULE_NAME ".c:v" DRV_MODULE_VERSION " (" DRV_MODULE_RELDATE ")\n"; @@ -51,8 +51,7 @@ MODULE_VERSION(DRV_MODULE_VERSION); #ifndef readq static u64 readq(void __iomem *reg) { - return (((u64)readl(reg + 0x4UL) << 32) | - (u64)readl(reg)); + return ((u64) readl(reg)) | (((u64) readl(reg + 4UL)) << 32); } static void writeq(u64 val, void __iomem *reg) @@ -407,7 +406,7 @@ static int esr2_set_rx_cfg(struct niu *np, unsigned long channel, u32 val) } /* Mode is always 10G fiber. */ -static int serdes_init_niu(struct niu *np) +static int serdes_init_niu_10g_fiber(struct niu *np) { struct niu_link_config *lp = &np->link_config; u32 tx_cfg, rx_cfg; @@ -444,6 +443,223 @@ static int serdes_init_niu(struct niu *np) return 0; } +static int serdes_init_niu_1g_serdes(struct niu *np) +{ + struct niu_link_config *lp = &np->link_config; + u16 pll_cfg, pll_sts; + int max_retry = 100; + u64 sig, mask, val; + u32 tx_cfg, rx_cfg; + unsigned long i; + int err; + + tx_cfg = (PLL_TX_CFG_ENTX | PLL_TX_CFG_SWING_1375MV | + PLL_TX_CFG_RATE_HALF); + rx_cfg = (PLL_RX_CFG_ENRX | PLL_RX_CFG_TERM_0P8VDDT | + PLL_RX_CFG_ALIGN_ENA | PLL_RX_CFG_LOS_LTHRESH | + PLL_RX_CFG_RATE_HALF); + + if (np->port == 0) + rx_cfg |= PLL_RX_CFG_EQ_LP_ADAPTIVE; + + if (lp->loopback_mode == LOOPBACK_PHY) { + u16 test_cfg = PLL_TEST_CFG_LOOPBACK_CML_DIS; + + mdio_write(np, np->port, NIU_ESR2_DEV_ADDR, + ESR2_TI_PLL_TEST_CFG_L, test_cfg); + + tx_cfg |= PLL_TX_CFG_ENTEST; + rx_cfg |= PLL_RX_CFG_ENTEST; + } + + /* Initialize PLL for 1G */ + pll_cfg = (PLL_CFG_ENPLL | PLL_CFG_MPY_8X); + + err = mdio_write(np, np->port, NIU_ESR2_DEV_ADDR, + ESR2_TI_PLL_CFG_L, pll_cfg); + if (err) { + dev_err(np->device, PFX "NIU Port %d " + "serdes_init_niu_1g_serdes: " + "mdio write to ESR2_TI_PLL_CFG_L failed", np->port); + return err; + } + + pll_sts = PLL_CFG_ENPLL; + + err = mdio_write(np, np->port, NIU_ESR2_DEV_ADDR, + ESR2_TI_PLL_STS_L, pll_sts); + if (err) { + dev_err(np->device, PFX "NIU Port %d " + "serdes_init_niu_1g_serdes: " + "mdio write to ESR2_TI_PLL_STS_L failed", np->port); + return err; + } + + udelay(200); + + /* Initialize all 4 lanes of the SERDES. */ + for (i = 0; i < 4; i++) { + err = esr2_set_tx_cfg(np, i, tx_cfg); + if (err) + return err; + } + + for (i = 0; i < 4; i++) { + err = esr2_set_rx_cfg(np, i, rx_cfg); + if (err) + return err; + } + + switch (np->port) { + case 0: + val = (ESR_INT_SRDY0_P0 | ESR_INT_DET0_P0); + mask = val; + break; + + case 1: + val = (ESR_INT_SRDY0_P1 | ESR_INT_DET0_P1); + mask = val; + break; + + default: + return -EINVAL; + } + + while (max_retry--) { + sig = nr64(ESR_INT_SIGNALS); + if ((sig & mask) == val) + break; + + mdelay(500); + } + + if ((sig & mask) != val) { + dev_err(np->device, PFX "Port %u signal bits [%08x] are not " + "[%08x]\n", np->port, (int) (sig & mask), (int) val); + return -ENODEV; + } + + return 0; +} + +static int serdes_init_niu_10g_serdes(struct niu *np) +{ + struct niu_link_config *lp = &np->link_config; + u32 tx_cfg, rx_cfg, pll_cfg, pll_sts; + int max_retry = 100; + u64 sig, mask, val; + unsigned long i; + int err; + + tx_cfg = (PLL_TX_CFG_ENTX | PLL_TX_CFG_SWING_1375MV); + rx_cfg = (PLL_RX_CFG_ENRX | PLL_RX_CFG_TERM_0P8VDDT | + PLL_RX_CFG_ALIGN_ENA | PLL_RX_CFG_LOS_LTHRESH | + PLL_RX_CFG_EQ_LP_ADAPTIVE); + + if (lp->loopback_mode == LOOPBACK_PHY) { + u16 test_cfg = PLL_TEST_CFG_LOOPBACK_CML_DIS; + + mdio_write(np, np->port, NIU_ESR2_DEV_ADDR, + ESR2_TI_PLL_TEST_CFG_L, test_cfg); + + tx_cfg |= PLL_TX_CFG_ENTEST; + rx_cfg |= PLL_RX_CFG_ENTEST; + } + + /* Initialize PLL for 10G */ + pll_cfg = (PLL_CFG_ENPLL | PLL_CFG_MPY_10X); + + err = mdio_write(np, np->port, NIU_ESR2_DEV_ADDR, + ESR2_TI_PLL_CFG_L, pll_cfg & 0xffff); + if (err) { + dev_err(np->device, PFX "NIU Port %d " + "serdes_init_niu_10g_serdes: " + "mdio write to ESR2_TI_PLL_CFG_L failed", np->port); + return err; + } + + pll_sts = PLL_CFG_ENPLL; + + err = mdio_write(np, np->port, NIU_ESR2_DEV_ADDR, + ESR2_TI_PLL_STS_L, pll_sts & 0xffff); + if (err) { + dev_err(np->device, PFX "NIU Port %d " + "serdes_init_niu_10g_serdes: " + "mdio write to ESR2_TI_PLL_STS_L failed", np->port); + return err; + } + + udelay(200); + + /* Initialize all 4 lanes of the SERDES. */ + for (i = 0; i < 4; i++) { + err = esr2_set_tx_cfg(np, i, tx_cfg); + if (err) + return err; + } + + for (i = 0; i < 4; i++) { + err = esr2_set_rx_cfg(np, i, rx_cfg); + if (err) + return err; + } + + /* check if serdes is ready */ + + switch (np->port) { + case 0: + mask = ESR_INT_SIGNALS_P0_BITS; + val = (ESR_INT_SRDY0_P0 | + ESR_INT_DET0_P0 | + ESR_INT_XSRDY_P0 | + ESR_INT_XDP_P0_CH3 | + ESR_INT_XDP_P0_CH2 | + ESR_INT_XDP_P0_CH1 | + ESR_INT_XDP_P0_CH0); + break; + + case 1: + mask = ESR_INT_SIGNALS_P1_BITS; + val = (ESR_INT_SRDY0_P1 | + ESR_INT_DET0_P1 | + ESR_INT_XSRDY_P1 | + ESR_INT_XDP_P1_CH3 | + ESR_INT_XDP_P1_CH2 | + ESR_INT_XDP_P1_CH1 | + ESR_INT_XDP_P1_CH0); + break; + + default: + return -EINVAL; + } + + while (max_retry--) { + sig = nr64(ESR_INT_SIGNALS); + if ((sig & mask) == val) + break; + + mdelay(500); + } + + if ((sig & mask) != val) { + pr_info(PFX "NIU Port %u signal bits [%08x] are not " + "[%08x] for 10G...trying 1G\n", + np->port, (int) (sig & mask), (int) val); + + /* 10G failed, try initializing at 1G */ + err = serdes_init_niu_1g_serdes(np); + if (!err) { + np->flags &= ~NIU_FLAGS_10G; + np->mac_xcvr = MAC_XCVR_PCS; + } else { + dev_err(np->device, PFX "Port %u 10G/1G SERDES " + "Link Failed \n", np->port); + return -ENODEV; + } + } + return 0; +} + static int esr_read_rxtx_ctrl(struct niu *np, unsigned long chan, u32 *val) { int err; @@ -1955,13 +2171,23 @@ static const struct niu_phy_ops phy_ops_10g_serdes = { .link_status = link_status_10g_serdes, }; +static const struct niu_phy_ops phy_ops_10g_serdes_niu = { + .serdes_init = serdes_init_niu_10g_serdes, + .link_status = link_status_10g_serdes, +}; + +static const struct niu_phy_ops phy_ops_1g_serdes_niu = { + .serdes_init = serdes_init_niu_1g_serdes, + .link_status = link_status_1g_serdes, +}; + static const struct niu_phy_ops phy_ops_1g_rgmii = { .xcvr_init = xcvr_init_1g_rgmii, .link_status = link_status_1g_rgmii, }; static const struct niu_phy_ops phy_ops_10g_fiber_niu = { - .serdes_init = serdes_init_niu, + .serdes_init = serdes_init_niu_10g_fiber, .xcvr_init = xcvr_init_10g, .link_status = link_status_10g, }; @@ -1999,11 +2225,21 @@ struct niu_phy_template { u32 phy_addr_base; }; -static const struct niu_phy_template phy_template_niu = { +static const struct niu_phy_template phy_template_niu_10g_fiber = { .ops = &phy_ops_10g_fiber_niu, .phy_addr_base = 16, }; +static const struct niu_phy_template phy_template_niu_10g_serdes = { + .ops = &phy_ops_10g_serdes_niu, + .phy_addr_base = 0, +}; + +static const struct niu_phy_template phy_template_niu_1g_serdes = { + .ops = &phy_ops_1g_serdes_niu, + .phy_addr_base = 0, +}; + static const struct niu_phy_template phy_template_10g_fiber = { .ops = &phy_ops_10g_fiber, .phy_addr_base = 8, @@ -2183,8 +2419,25 @@ static int niu_determine_phy_disposition(struct niu *np) u32 phy_addr_off = 0; if (plat_type == PLAT_TYPE_NIU) { - tp = &phy_template_niu; - phy_addr_off += np->port; + switch (np->flags & + (NIU_FLAGS_10G | + NIU_FLAGS_FIBER | + NIU_FLAGS_XCVR_SERDES)) { + case NIU_FLAGS_10G | NIU_FLAGS_XCVR_SERDES: + /* 10G Serdes */ + tp = &phy_template_niu_10g_serdes; + break; + case NIU_FLAGS_XCVR_SERDES: + /* 1G Serdes */ + tp = &phy_template_niu_1g_serdes; + break; + case NIU_FLAGS_10G | NIU_FLAGS_FIBER: + /* 10G Fiber */ + default: + tp = &phy_template_niu_10g_fiber; + phy_addr_off += np->port; + break; + } } else { switch (np->flags & (NIU_FLAGS_10G | @@ -7214,6 +7467,12 @@ static int __devinit niu_phy_type_prop_decode(struct niu *np, np->flags |= NIU_FLAGS_10G; np->flags &= ~NIU_FLAGS_FIBER; np->mac_xcvr = MAC_XCVR_XPCS; + } else if (!strcmp(phy_prop, "xgsd") || !strcmp(phy_prop, "gsd")) { + /* 10G Serdes or 1G Serdes, default to 10G */ + np->flags |= NIU_FLAGS_10G; + np->flags &= ~NIU_FLAGS_FIBER; + np->flags |= NIU_FLAGS_XCVR_SERDES; + np->mac_xcvr = MAC_XCVR_XPCS; } else { return -EINVAL; } @@ -7742,6 +8001,8 @@ static int __devinit walk_phys(struct niu *np, struct niu_parent *parent) u32 val; int err; + num_10g = num_1g = 0; + if (!strcmp(np->vpd.model, NIU_ALONSO_MDL_STR) || !strcmp(np->vpd.model, NIU_KIMI_MDL_STR)) { num_10g = 0; @@ -7758,6 +8019,16 @@ static int __devinit walk_phys(struct niu *np, struct niu_parent *parent) parent->num_ports = 2; val = (phy_encode(PORT_TYPE_10G, 0) | phy_encode(PORT_TYPE_10G, 1)); + } else if ((np->flags & NIU_FLAGS_XCVR_SERDES) && + (parent->plat_type == PLAT_TYPE_NIU)) { + /* this is the Monza case */ + if (np->flags & NIU_FLAGS_10G) { + val = (phy_encode(PORT_TYPE_10G, 0) | + phy_encode(PORT_TYPE_10G, 1)); + } else { + val = (phy_encode(PORT_TYPE_1G, 0) | + phy_encode(PORT_TYPE_1G, 1)); + } } else { err = fill_phy_probe_info(np, parent, info); if (err) @@ -8657,7 +8928,9 @@ static void __devinit niu_device_announce(struct niu *np) dev->name, (np->flags & NIU_FLAGS_XMAC ? "XMAC" : "BMAC"), (np->flags & NIU_FLAGS_10G ? "10G" : "1G"), - (np->flags & NIU_FLAGS_FIBER ? "FIBER" : "COPPER"), + (np->flags & NIU_FLAGS_FIBER ? "FIBER" : + (np->flags & NIU_FLAGS_XCVR_SERDES ? "SERDES" : + "COPPER")), (np->mac_xcvr == MAC_XCVR_MII ? "MII" : (np->mac_xcvr == MAC_XCVR_PCS ? "PCS" : "XPCS")), np->vpd.phy_type); diff --git a/drivers/net/niu.h b/drivers/net/niu.h index c6fa883daa2..180ca8ae93d 100644 --- a/drivers/net/niu.h +++ b/drivers/net/niu.h @@ -1048,6 +1048,13 @@ #define PLL_CFG_LD_SHIFT 8 #define PLL_CFG_MPY 0x0000001e #define PLL_CFG_MPY_SHIFT 1 +#define PLL_CFG_MPY_4X 0x0 +#define PLL_CFG_MPY_5X 0x00000002 +#define PLL_CFG_MPY_6X 0x00000004 +#define PLL_CFG_MPY_8X 0x00000008 +#define PLL_CFG_MPY_10X 0x0000000a +#define PLL_CFG_MPY_12X 0x0000000c +#define PLL_CFG_MPY_12P5X 0x0000000e #define PLL_CFG_ENPLL 0x00000001 #define ESR2_TI_PLL_STS_L (ESR2_BASE + 0x002) @@ -1093,6 +1100,9 @@ #define PLL_TX_CFG_INVPAIR 0x00000080 #define PLL_TX_CFG_RATE 0x00000060 #define PLL_TX_CFG_RATE_SHIFT 5 +#define PLL_TX_CFG_RATE_FULL 0x0 +#define PLL_TX_CFG_RATE_HALF 0x20 +#define PLL_TX_CFG_RATE_QUAD 0x40 #define PLL_TX_CFG_BUSWIDTH 0x0000001c #define PLL_TX_CFG_BUSWIDTH_SHIFT 2 #define PLL_TX_CFG_ENTEST 0x00000002 @@ -1132,6 +1142,9 @@ #define PLL_RX_CFG_INVPAIR 0x00000080 #define PLL_RX_CFG_RATE 0x00000060 #define PLL_RX_CFG_RATE_SHIFT 5 +#define PLL_RX_CFG_RATE_FULL 0x0 +#define PLL_RX_CFG_RATE_HALF 0x20 +#define PLL_RX_CFG_RATE_QUAD 0x40 #define PLL_RX_CFG_BUSWIDTH 0x0000001c #define PLL_RX_CFG_BUSWIDTH_SHIFT 2 #define PLL_RX_CFG_ENTEST 0x00000002 diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c index 4aa54794704..eb6411c4694 100644 --- a/drivers/net/phy/marvell.c +++ b/drivers/net/phy/marvell.c @@ -227,6 +227,59 @@ static int m88e1111_config_init(struct phy_device *phydev) return 0; } +static int m88e1118_config_aneg(struct phy_device *phydev) +{ + int err; + + err = phy_write(phydev, MII_BMCR, BMCR_RESET); + if (err < 0) + return err; + + err = phy_write(phydev, MII_M1011_PHY_SCR, + MII_M1011_PHY_SCR_AUTO_CROSS); + if (err < 0) + return err; + + err = genphy_config_aneg(phydev); + return 0; +} + +static int m88e1118_config_init(struct phy_device *phydev) +{ + int err; + + /* Change address */ + err = phy_write(phydev, 0x16, 0x0002); + if (err < 0) + return err; + + /* Enable 1000 Mbit */ + err = phy_write(phydev, 0x15, 0x1070); + if (err < 0) + return err; + + /* Change address */ + err = phy_write(phydev, 0x16, 0x0003); + if (err < 0) + return err; + + /* Adjust LED Control */ + err = phy_write(phydev, 0x10, 0x021e); + if (err < 0) + return err; + + /* Reset address */ + err = phy_write(phydev, 0x16, 0x0); + if (err < 0) + return err; + + err = phy_write(phydev, MII_BMCR, BMCR_RESET); + if (err < 0) + return err; + + return 0; +} + static int m88e1145_config_init(struct phy_device *phydev) { int err; @@ -416,6 +469,19 @@ static struct phy_driver marvell_drivers[] = { .driver = { .owner = THIS_MODULE }, }, { + .phy_id = 0x01410e10, + .phy_id_mask = 0xfffffff0, + .name = "Marvell 88E1118", + .features = PHY_GBIT_FEATURES, + .flags = PHY_HAS_INTERRUPT, + .config_init = &m88e1118_config_init, + .config_aneg = &m88e1118_config_aneg, + .read_status = &genphy_read_status, + .ack_interrupt = &marvell_ack_interrupt, + .config_intr = &marvell_config_intr, + .driver = {.owner = THIS_MODULE,}, + }, + { .phy_id = 0x01410cd0, .phy_id_mask = 0xfffffff0, .name = "Marvell 88E1145", diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c index d0ed1ef284a..536bda1f428 100644 --- a/drivers/net/phy/mdio_bus.c +++ b/drivers/net/phy/mdio_bus.c @@ -136,7 +136,7 @@ void mdiobus_unregister(struct mii_bus *bus) BUG_ON(bus->state != MDIOBUS_REGISTERED); bus->state = MDIOBUS_UNREGISTERED; - device_unregister(&bus->dev); + device_del(&bus->dev); for (i = 0; i < PHY_MAX_ADDR; i++) { if (bus->phy_map[i]) device_unregister(&bus->phy_map[i]->dev); diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c index e11b03b2b25..8fb1faca883 100644 --- a/drivers/net/phy/phy_device.c +++ b/drivers/net/phy/phy_device.c @@ -227,8 +227,8 @@ struct phy_device * get_phy_device(struct mii_bus *bus, int addr) if (r) return ERR_PTR(r); - /* If the phy_id is all Fs, there is no device there */ - if (0xffffffff == phy_id) + /* If the phy_id is all Fs or all 0s, there is no device there */ + if ((0xffff == phy_id) || (0x00 == phy_id)) return NULL; dev = phy_device_create(bus, addr, phy_id); diff --git a/drivers/net/qla3xxx.c b/drivers/net/qla3xxx.c index 3cdd07c45b6..508452c0215 100644 --- a/drivers/net/qla3xxx.c +++ b/drivers/net/qla3xxx.c @@ -1515,9 +1515,6 @@ static u32 ql_get_link_state(struct ql3_adapter *qdev) linkState = LS_UP; } else { linkState = LS_DOWN; - if (netif_msg_link(qdev)) - printk(KERN_WARNING PFX - "%s: Link is down.\n", qdev->ndev->name); } return linkState; } @@ -1581,10 +1578,6 @@ static int ql_finish_auto_neg(struct ql3_adapter *qdev) ql_mac_enable(qdev, 1); } - if (netif_msg_link(qdev)) - printk(KERN_DEBUG PFX - "%s: Change port_link_state LS_DOWN to LS_UP.\n", - qdev->ndev->name); qdev->port_link_state = LS_UP; netif_start_queue(qdev->ndev); netif_carrier_on(qdev->ndev); @@ -1655,14 +1648,9 @@ static void ql_link_state_machine_work(struct work_struct *work) /* Fall Through */ case LS_DOWN: - if (netif_msg_link(qdev)) - printk(KERN_DEBUG PFX - "%s: port_link_state = LS_DOWN.\n", - qdev->ndev->name); if (curr_link_state == LS_UP) { if (netif_msg_link(qdev)) - printk(KERN_DEBUG PFX - "%s: curr_link_state = LS_UP.\n", + printk(KERN_INFO PFX "%s: Link is up.\n", qdev->ndev->name); if (ql_is_auto_neg_complete(qdev)) ql_finish_auto_neg(qdev); @@ -1670,6 +1658,7 @@ static void ql_link_state_machine_work(struct work_struct *work) if (qdev->port_link_state == LS_UP) ql_link_down_detect_clear(qdev); + qdev->port_link_state = LS_UP; } break; @@ -1678,12 +1667,14 @@ static void ql_link_state_machine_work(struct work_struct *work) * See if the link is currently down or went down and came * back up */ - if ((curr_link_state == LS_DOWN) || ql_link_down_detect(qdev)) { + if (curr_link_state == LS_DOWN) { if (netif_msg_link(qdev)) printk(KERN_INFO PFX "%s: Link is down.\n", qdev->ndev->name); qdev->port_link_state = LS_DOWN; } + if (ql_link_down_detect(qdev)) + qdev->port_link_state = LS_DOWN; break; } spin_unlock_irqrestore(&qdev->hw_lock, hw_flags); diff --git a/drivers/net/smc911x.c b/drivers/net/smc911x.c index 5051554ff05..1f26ab0e798 100644 --- a/drivers/net/smc911x.c +++ b/drivers/net/smc911x.c @@ -2050,7 +2050,9 @@ err_out: */ static int smc911x_drv_probe(struct platform_device *pdev) { +#ifdef SMC_DYNAMIC_BUS_CONFIG struct smc911x_platdata *pd = pdev->dev.platform_data; +#endif struct net_device *ndev; struct resource *res; struct smc911x_local *lp; @@ -2182,9 +2184,9 @@ static int smc911x_drv_resume(struct platform_device *dev) if (netif_running(ndev)) { smc911x_reset(ndev); - smc911x_enable(ndev); if (lp->phy_type != 0) smc911x_phy_configure(&lp->phy_configure); + smc911x_enable(ndev); netif_device_attach(ndev); } } diff --git a/drivers/net/ucc_geth_ethtool.c b/drivers/net/ucc_geth_ethtool.c index 85f38a6b6a4..68a7f541413 100644 --- a/drivers/net/ucc_geth_ethtool.c +++ b/drivers/net/ucc_geth_ethtool.c @@ -323,17 +323,17 @@ static void uec_get_ethtool_stats(struct net_device *netdev, if (stats_mode & UCC_GETH_STATISTICS_GATHERING_MODE_HARDWARE) { base = (u32 __iomem *)&ugeth->ug_regs->tx64; for (i = 0; i < UEC_HW_STATS_LEN; i++) - data[j++] = (u64)in_be32(&base[i]); + data[j++] = in_be32(&base[i]); } if (stats_mode & UCC_GETH_STATISTICS_GATHERING_MODE_FIRMWARE_TX) { base = (u32 __iomem *)ugeth->p_tx_fw_statistics_pram; for (i = 0; i < UEC_TX_FW_STATS_LEN; i++) - data[j++] = (u64)in_be32(&base[i]); + data[j++] = base ? in_be32(&base[i]) : 0; } if (stats_mode & UCC_GETH_STATISTICS_GATHERING_MODE_FIRMWARE_RX) { base = (u32 __iomem *)ugeth->p_rx_fw_statistics_pram; for (i = 0; i < UEC_RX_FW_STATS_LEN; i++) - data[j++] = (u64)in_be32(&base[i]); + data[j++] = base ? in_be32(&base[i]) : 0; } } diff --git a/drivers/net/usb/asix.c b/drivers/net/usb/asix.c index 37ecf845edf..e12cdb4543b 100644 --- a/drivers/net/usb/asix.c +++ b/drivers/net/usb/asix.c @@ -1444,6 +1444,10 @@ static const struct usb_device_id products [] = { // Apple USB Ethernet Adapter USB_DEVICE(0x05ac, 0x1402), .driver_info = (unsigned long) &ax88772_info, +}, { + // Cables-to-Go USB Ethernet Adapter + USB_DEVICE(0x0b95, 0x772a), + .driver_info = (unsigned long) &ax88772_info, }, { }, // END }; diff --git a/drivers/net/via-velocity.c b/drivers/net/via-velocity.c index 3590ea5a902..11cb3e504e1 100644 --- a/drivers/net/via-velocity.c +++ b/drivers/net/via-velocity.c @@ -2296,7 +2296,7 @@ static void velocity_set_multi(struct net_device *dev) } mac_set_cam_mask(regs, vptr->mCAMmask); - rx_mode = (RCR_AM | RCR_AB); + rx_mode = RCR_AM | RCR_AB | RCR_AP; } if (dev->mtu > 1500) rx_mode |= RCR_AL; diff --git a/drivers/net/wireless/hostap/hostap_wlan.h b/drivers/net/wireless/hostap/hostap_wlan.h index ffdf4876121..a68f97c3935 100644 --- a/drivers/net/wireless/hostap/hostap_wlan.h +++ b/drivers/net/wireless/hostap/hostap_wlan.h @@ -918,9 +918,12 @@ struct hostap_interface { /* * TX meta data - stored in skb->cb buffer, so this must not be increased over - * the 40-byte limit + * the 48-byte limit. + * THE PADDING THIS STARTS WITH IS A HORRIBLE HACK THAT SHOULD NOT LIVE + * TO SEE THE DAY. */ struct hostap_skb_tx_data { + unsigned int __padding_for_default_qdiscs; u32 magic; /* HOSTAP_SKB_TX_DATA_MAGIC */ u8 rate; /* transmit rate */ #define HOSTAP_TX_FLAGS_WDS BIT(0) diff --git a/drivers/net/wireless/rtl8187_dev.c b/drivers/net/wireless/rtl8187_dev.c index 431e3c78bf2..69eb0132593 100644 --- a/drivers/net/wireless/rtl8187_dev.c +++ b/drivers/net/wireless/rtl8187_dev.c @@ -48,6 +48,9 @@ static struct usb_device_id rtl8187_table[] __devinitdata = { {USB_DEVICE(0x03f0, 0xca02), .driver_info = DEVICE_RTL8187}, /* Sitecom */ {USB_DEVICE(0x0df6, 0x000d), .driver_info = DEVICE_RTL8187}, + {USB_DEVICE(0x0df6, 0x0028), .driver_info = DEVICE_RTL8187B}, + /* Abocom */ + {USB_DEVICE(0x13d1, 0xabe6), .driver_info = DEVICE_RTL8187}, {} }; diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c index b3a63edb690..ae5ec76dca7 100644 --- a/drivers/pci/pci-acpi.c +++ b/drivers/pci/pci-acpi.c @@ -63,7 +63,7 @@ static acpi_status acpi_run_osc(acpi_handle handle, union acpi_object in_params[4]; struct acpi_buffer output = {ACPI_ALLOCATE_BUFFER, NULL}; union acpi_object *out_obj; - u32 osc_dw0, flags = osc_args->capbuf[OSC_QUERY_TYPE]; + u32 errors, flags = osc_args->capbuf[OSC_QUERY_TYPE]; /* Setting up input parameters */ input.count = 4; @@ -92,15 +92,16 @@ static acpi_status acpi_run_osc(acpi_handle handle, status = AE_TYPE; goto out_kfree; } - osc_dw0 = *((u32 *)out_obj->buffer.pointer); - if (osc_dw0) { - if (osc_dw0 & OSC_REQUEST_ERROR) + /* Need to ignore the bit0 in result code */ + errors = *((u32 *)out_obj->buffer.pointer) & ~(1 << 0); + if (errors) { + if (errors & OSC_REQUEST_ERROR) printk(KERN_DEBUG "_OSC request fails\n"); - if (osc_dw0 & OSC_INVALID_UUID_ERROR) + if (errors & OSC_INVALID_UUID_ERROR) printk(KERN_DEBUG "_OSC invalid UUID\n"); - if (osc_dw0 & OSC_INVALID_REVISION_ERROR) + if (errors & OSC_INVALID_REVISION_ERROR) printk(KERN_DEBUG "_OSC invalid revision\n"); - if (osc_dw0 & OSC_CAPABILITIES_MASK_ERROR) { + if (errors & OSC_CAPABILITIES_MASK_ERROR) { if (flags & OSC_QUERY_ENABLE) goto out_success; printk(KERN_DEBUG "_OSC FW not grant req. control\n"); diff --git a/drivers/pcmcia/cistpl.c b/drivers/pcmcia/cistpl.c index dcce9f5d846..4a110b7b267 100644 --- a/drivers/pcmcia/cistpl.c +++ b/drivers/pcmcia/cistpl.c @@ -351,10 +351,11 @@ int verify_cis_cache(struct pcmcia_socket *s) char *buf; buf = kmalloc(256, GFP_KERNEL); - if (buf == NULL) + if (buf == NULL) { dev_printk(KERN_WARNING, &s->dev, "no memory for verifying CIS\n"); return -ENOMEM; + } list_for_each_entry(cis, &s->cis_cache, node) { int len = cis->len; diff --git a/drivers/pcmcia/cs.c b/drivers/pcmcia/cs.c index c68c5d33828..0660ad18258 100644 --- a/drivers/pcmcia/cs.c +++ b/drivers/pcmcia/cs.c @@ -186,12 +186,6 @@ int pcmcia_register_socket(struct pcmcia_socket *socket) spin_lock_init(&socket->lock); - if (socket->resource_ops->init) { - ret = socket->resource_ops->init(socket); - if (ret) - return (ret); - } - /* try to obtain a socket number [yes, it gets ugly if we * register more than 2^sizeof(unsigned int) pcmcia * sockets... but the socket number is deprecated @@ -226,7 +220,7 @@ int pcmcia_register_socket(struct pcmcia_socket *socket) /* set proper values in socket->dev */ dev_set_drvdata(&socket->dev, socket); socket->dev.class = &pcmcia_socket_class; - snprintf(socket->dev.bus_id, BUS_ID_SIZE, "pcmcia_socket%u", socket->sock); + dev_set_name(&socket->dev, "pcmcia_socket%u", socket->sock); /* base address = 0, map = 0 */ socket->cis_mem.flags = 0; @@ -239,6 +233,12 @@ int pcmcia_register_socket(struct pcmcia_socket *socket) mutex_init(&socket->skt_mutex); spin_lock_init(&socket->thread_lock); + if (socket->resource_ops->init) { + ret = socket->resource_ops->init(socket); + if (ret) + goto err; + } + tsk = kthread_run(pccardd, socket, "pccardd"); if (IS_ERR(tsk)) { ret = PTR_ERR(tsk); diff --git a/drivers/pcmcia/ds.c b/drivers/pcmcia/ds.c index 79566025549..47cab31ff6e 100644 --- a/drivers/pcmcia/ds.c +++ b/drivers/pcmcia/ds.c @@ -622,7 +622,6 @@ struct pcmcia_device * pcmcia_device_add(struct pcmcia_socket *s, unsigned int f { struct pcmcia_device *p_dev, *tmp_dev; unsigned long flags; - int bus_id_len; s = pcmcia_get_socket(s); if (!s) @@ -650,12 +649,12 @@ struct pcmcia_device * pcmcia_device_add(struct pcmcia_socket *s, unsigned int f /* by default don't allow DMA */ p_dev->dma_mask = DMA_MASK_NONE; p_dev->dev.dma_mask = &p_dev->dma_mask; - bus_id_len = sprintf (p_dev->dev.bus_id, "%d.%d", p_dev->socket->sock, p_dev->device_no); - - p_dev->devname = kmalloc(6 + bus_id_len + 1, GFP_KERNEL); + dev_set_name(&p_dev->dev, "%d.%d", p_dev->socket->sock, p_dev->device_no); + if (!dev_name(&p_dev->dev)) + goto err_free; + p_dev->devname = kasprintf(GFP_KERNEL, "pcmcia%s", dev_name(&p_dev->dev)); if (!p_dev->devname) goto err_free; - sprintf (p_dev->devname, "pcmcia%s", p_dev->dev.bus_id); ds_dev_dbg(3, &p_dev->dev, "devname is %s\n", p_dev->devname); spin_lock_irqsave(&pcmcia_dev_list_lock, flags); @@ -668,6 +667,8 @@ struct pcmcia_device * pcmcia_device_add(struct pcmcia_socket *s, unsigned int f list_for_each_entry(tmp_dev, &s->devices_list, socket_device_list) if (p_dev->func == tmp_dev->func) { p_dev->function_config = tmp_dev->function_config; + p_dev->io = tmp_dev->io; + p_dev->irq = tmp_dev->irq; kref_get(&p_dev->function_config->ref); } diff --git a/drivers/pcmcia/pcmcia_resource.c b/drivers/pcmcia/pcmcia_resource.c index 76d4a98f095..f5d0ba8e22d 100644 --- a/drivers/pcmcia/pcmcia_resource.c +++ b/drivers/pcmcia/pcmcia_resource.c @@ -302,9 +302,10 @@ int pcmcia_modify_configuration(struct pcmcia_device *p_dev, /* We only allow changing Vpp1 and Vpp2 to the same value */ if ((mod->Attributes & CONF_VPP1_CHANGE_VALID) && (mod->Attributes & CONF_VPP2_CHANGE_VALID)) { - if (mod->Vpp1 != mod->Vpp2) + if (mod->Vpp1 != mod->Vpp2) { ds_dbg(s, 0, "Vpp1 and Vpp2 must be the same\n"); return -EINVAL; + } s->socket.Vpp = mod->Vpp1; if (s->ops->set_socket(s, &s->socket)) { dev_printk(KERN_WARNING, &s->dev, diff --git a/drivers/pcmcia/rsrc_nonstatic.c b/drivers/pcmcia/rsrc_nonstatic.c index 17f4ecf1c0c..9ca22c7aafb 100644 --- a/drivers/pcmcia/rsrc_nonstatic.c +++ b/drivers/pcmcia/rsrc_nonstatic.c @@ -71,7 +71,7 @@ static DEFINE_MUTEX(rsrc_mutex); ======================================================================*/ static struct resource * -make_resource(resource_size_t b, resource_size_t n, int flags, char *name) +make_resource(resource_size_t b, resource_size_t n, int flags, const char *name) { struct resource *res = kzalloc(sizeof(*res), GFP_KERNEL); @@ -624,7 +624,7 @@ static int nonstatic_adjust_io_region(struct resource *res, unsigned long r_star static struct resource *nonstatic_find_io_region(unsigned long base, int num, unsigned long align, struct pcmcia_socket *s) { - struct resource *res = make_resource(0, num, IORESOURCE_IO, s->dev.bus_id); + struct resource *res = make_resource(0, num, IORESOURCE_IO, dev_name(&s->dev)); struct socket_data *s_data = s->resource_data; struct pcmcia_align_data data; unsigned long min = base; @@ -658,7 +658,7 @@ static struct resource *nonstatic_find_io_region(unsigned long base, int num, static struct resource * nonstatic_find_mem_region(u_long base, u_long num, u_long align, int low, struct pcmcia_socket *s) { - struct resource *res = make_resource(0, num, IORESOURCE_MEM, s->dev.bus_id); + struct resource *res = make_resource(0, num, IORESOURCE_MEM, dev_name(&s->dev)); struct socket_data *s_data = s->resource_data; struct pcmcia_align_data data; unsigned long min, max; diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig index 8abbb2020af..123092d8a98 100644 --- a/drivers/rtc/Kconfig +++ b/drivers/rtc/Kconfig @@ -277,6 +277,14 @@ config RTC_DRV_FM3130 This driver can also be built as a module. If so the module will be called rtc-fm3130. +config RTC_DRV_RX8581 + tristate "Epson RX-8581" + help + If you say yes here you will get support for the Epson RX-8581. + + This driver can also be built as a module. If so the module + will be called rtc-rx8581. + endif # I2C comment "SPI RTC drivers" @@ -302,6 +310,17 @@ config RTC_DRV_DS1305 This driver can also be built as a module. If so, the module will be called rtc-ds1305. +config RTC_DRV_DS1390 + tristate "Dallas/Maxim DS1390/93/94" + help + If you say yes here you get support for the DS1390/93/94 chips. + + This driver only supports the RTC feature, and not other chip + features such as alarms and trickle charging. + + This driver can also be built as a module. If so, the module + will be called rtc-ds1390. + config RTC_DRV_MAX6902 tristate "Maxim MAX6902" help @@ -468,6 +487,16 @@ config RTC_DRV_V3020 This driver can also be built as a module. If so, the module will be called rtc-v3020. +config RTC_DRV_WM8350 + tristate "Wolfson Microelectronics WM8350 RTC" + depends on MFD_WM8350 + help + If you say yes here you will get support for the RTC subsystem + of the Wolfson Microelectronics WM8350. + + This driver can also be built as a module. If so, the module + will be called "rtc-wm8350". + comment "on-CPU RTC drivers" config RTC_DRV_OMAP diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile index e9e8474cc8f..6e79c912bf9 100644 --- a/drivers/rtc/Makefile +++ b/drivers/rtc/Makefile @@ -28,6 +28,7 @@ obj-$(CONFIG_RTC_DRV_DS1302) += rtc-ds1302.o obj-$(CONFIG_RTC_DRV_DS1305) += rtc-ds1305.o obj-$(CONFIG_RTC_DRV_DS1307) += rtc-ds1307.o obj-$(CONFIG_RTC_DRV_DS1374) += rtc-ds1374.o +obj-$(CONFIG_RTC_DRV_DS1390) += rtc-ds1390.o obj-$(CONFIG_RTC_DRV_DS1511) += rtc-ds1511.o obj-$(CONFIG_RTC_DRV_DS1553) += rtc-ds1553.o obj-$(CONFIG_RTC_DRV_DS1672) += rtc-ds1672.o @@ -57,6 +58,7 @@ obj-$(CONFIG_RTC_DRV_R9701) += rtc-r9701.o obj-$(CONFIG_RTC_DRV_RS5C313) += rtc-rs5c313.o obj-$(CONFIG_RTC_DRV_RS5C348) += rtc-rs5c348.o obj-$(CONFIG_RTC_DRV_RS5C372) += rtc-rs5c372.o +obj-$(CONFIG_RTC_DRV_RX8581) += rtc-rx8581.o obj-$(CONFIG_RTC_DRV_S35390A) += rtc-s35390a.o obj-$(CONFIG_RTC_DRV_S3C) += rtc-s3c.o obj-$(CONFIG_RTC_DRV_SA1100) += rtc-sa1100.o @@ -66,4 +68,5 @@ obj-$(CONFIG_RTC_DRV_TEST) += rtc-test.o obj-$(CONFIG_RTC_DRV_TWL4030) += rtc-twl4030.o obj-$(CONFIG_RTC_DRV_V3020) += rtc-v3020.o obj-$(CONFIG_RTC_DRV_VR41XX) += rtc-vr41xx.o +obj-$(CONFIG_RTC_DRV_WM8350) += rtc-wm8350.o obj-$(CONFIG_RTC_DRV_X1205) += rtc-x1205.o diff --git a/drivers/rtc/rtc-ds1390.c b/drivers/rtc/rtc-ds1390.c new file mode 100644 index 00000000000..599e976bf01 --- /dev/null +++ b/drivers/rtc/rtc-ds1390.c @@ -0,0 +1,220 @@ +/* + * rtc-ds1390.c -- driver for DS1390/93/94 + * + * Copyright (C) 2008 Mercury IMC Ltd + * Written by Mark Jackson <mpfj@mimc.co.uk> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * NOTE : Currently this driver only supports the bare minimum for read + * and write the RTC. The extra features provided by the chip family + * (alarms, trickle charger, different control registers) are unavailable. + */ + +#include <linux/platform_device.h> +#include <linux/rtc.h> +#include <linux/spi/spi.h> +#include <linux/bcd.h> + +#define DS1390_REG_100THS 0x00 +#define DS1390_REG_SECONDS 0x01 +#define DS1390_REG_MINUTES 0x02 +#define DS1390_REG_HOURS 0x03 +#define DS1390_REG_DAY 0x04 +#define DS1390_REG_DATE 0x05 +#define DS1390_REG_MONTH_CENT 0x06 +#define DS1390_REG_YEAR 0x07 + +#define DS1390_REG_ALARM_100THS 0x08 +#define DS1390_REG_ALARM_SECONDS 0x09 +#define DS1390_REG_ALARM_MINUTES 0x0A +#define DS1390_REG_ALARM_HOURS 0x0B +#define DS1390_REG_ALARM_DAY_DATE 0x0C + +#define DS1390_REG_CONTROL 0x0D +#define DS1390_REG_STATUS 0x0E +#define DS1390_REG_TRICKLE 0x0F + +struct ds1390 { + struct rtc_device *rtc; + u8 txrx_buf[9]; /* cmd + 8 registers */ +}; + +static void ds1390_set_reg(struct device *dev, unsigned char address, + unsigned char data) +{ + struct spi_device *spi = to_spi_device(dev); + struct ds1390 *chip = dev_get_drvdata(dev); + + /* Set MSB to indicate write */ + chip->txrx_buf[0] = address | 0x80; + chip->txrx_buf[1] = data; + + /* do the i/o */ + spi_write_then_read(spi, chip->txrx_buf, 2, NULL, 0); +} + +static int ds1390_get_reg(struct device *dev, unsigned char address, + unsigned char *data) +{ + struct spi_device *spi = to_spi_device(dev); + struct ds1390 *chip = dev_get_drvdata(dev); + int status; + + if (!data) + return -EINVAL; + + /* Clear MSB to indicate read */ + chip->txrx_buf[0] = address & 0x7f; + /* do the i/o */ + status = spi_write_then_read(spi, chip->txrx_buf, 1, chip->txrx_buf, 1); + if (status != 0) + return status; + + *data = chip->txrx_buf[1]; + + return 0; +} + +static int ds1390_get_datetime(struct device *dev, struct rtc_time *dt) +{ + struct spi_device *spi = to_spi_device(dev); + struct ds1390 *chip = dev_get_drvdata(dev); + int status; + + /* build the message */ + chip->txrx_buf[0] = DS1390_REG_SECONDS; + + /* do the i/o */ + status = spi_write_then_read(spi, chip->txrx_buf, 1, chip->txrx_buf, 8); + if (status != 0) + return status; + + /* The chip sends data in this order: + * Seconds, Minutes, Hours, Day, Date, Month / Century, Year */ + dt->tm_sec = bcd2bin(chip->txrx_buf[0]); + dt->tm_min = bcd2bin(chip->txrx_buf[1]); + dt->tm_hour = bcd2bin(chip->txrx_buf[2]); + dt->tm_wday = bcd2bin(chip->txrx_buf[3]); + dt->tm_mday = bcd2bin(chip->txrx_buf[4]); + /* mask off century bit */ + dt->tm_mon = bcd2bin(chip->txrx_buf[5] & 0x7f) - 1; + /* adjust for century bit */ + dt->tm_year = bcd2bin(chip->txrx_buf[6]) + ((chip->txrx_buf[5] & 0x80) ? 100 : 0); + + return rtc_valid_tm(dt); +} + +static int ds1390_set_datetime(struct device *dev, struct rtc_time *dt) +{ + struct spi_device *spi = to_spi_device(dev); + struct ds1390 *chip = dev_get_drvdata(dev); + + /* build the message */ + chip->txrx_buf[0] = DS1390_REG_SECONDS | 0x80; + chip->txrx_buf[1] = bin2bcd(dt->tm_sec); + chip->txrx_buf[2] = bin2bcd(dt->tm_min); + chip->txrx_buf[3] = bin2bcd(dt->tm_hour); + chip->txrx_buf[4] = bin2bcd(dt->tm_wday); + chip->txrx_buf[5] = bin2bcd(dt->tm_mday); + chip->txrx_buf[6] = bin2bcd(dt->tm_mon + 1) | + ((dt->tm_year > 99) ? 0x80 : 0x00); + chip->txrx_buf[7] = bin2bcd(dt->tm_year % 100); + + /* do the i/o */ + return spi_write_then_read(spi, chip->txrx_buf, 8, NULL, 0); +} + +static int ds1390_read_time(struct device *dev, struct rtc_time *tm) +{ + return ds1390_get_datetime(dev, tm); +} + +static int ds1390_set_time(struct device *dev, struct rtc_time *tm) +{ + return ds1390_set_datetime(dev, tm); +} + +static const struct rtc_class_ops ds1390_rtc_ops = { + .read_time = ds1390_read_time, + .set_time = ds1390_set_time, +}; + +static int __devinit ds1390_probe(struct spi_device *spi) +{ + struct rtc_device *rtc; + unsigned char tmp; + struct ds1390 *chip; + int res; + + printk(KERN_DEBUG "DS1390 SPI RTC driver\n"); + + rtc = rtc_device_register("ds1390", + &spi->dev, &ds1390_rtc_ops, THIS_MODULE); + if (IS_ERR(rtc)) { + printk(KERN_ALERT "RTC : unable to register device\n"); + return PTR_ERR(rtc); + } + + spi->mode = SPI_MODE_3; + spi->bits_per_word = 8; + spi_setup(spi); + + chip = kzalloc(sizeof *chip, GFP_KERNEL); + if (!chip) { + printk(KERN_ALERT "RTC : unable to allocate device memory\n"); + rtc_device_unregister(rtc); + return -ENOMEM; + } + chip->rtc = rtc; + dev_set_drvdata(&spi->dev, chip); + + res = ds1390_get_reg(&spi->dev, DS1390_REG_SECONDS, &tmp); + if (res) { + printk(KERN_ALERT "RTC : unable to read device\n"); + rtc_device_unregister(rtc); + return res; + } + + return 0; +} + +static int __devexit ds1390_remove(struct spi_device *spi) +{ + struct ds1390 *chip = platform_get_drvdata(spi); + struct rtc_device *rtc = chip->rtc; + + if (rtc) + rtc_device_unregister(rtc); + + kfree(chip); + + return 0; +} + +static struct spi_driver ds1390_driver = { + .driver = { + .name = "rtc-ds1390", + .owner = THIS_MODULE, + }, + .probe = ds1390_probe, + .remove = __devexit_p(ds1390_remove), +}; + +static __init int ds1390_init(void) +{ + return spi_register_driver(&ds1390_driver); +} +module_init(ds1390_init); + +static __exit void ds1390_exit(void) +{ + spi_unregister_driver(&ds1390_driver); +} +module_exit(ds1390_exit); + +MODULE_DESCRIPTION("DS1390/93/94 SPI RTC driver"); +MODULE_AUTHOR("Mark Jackson <mpfj@mimc.co.uk>"); +MODULE_LICENSE("GPL"); diff --git a/drivers/rtc/rtc-rx8581.c b/drivers/rtc/rtc-rx8581.c new file mode 100644 index 00000000000..c9522f3bc21 --- /dev/null +++ b/drivers/rtc/rtc-rx8581.c @@ -0,0 +1,281 @@ +/* + * An I2C driver for the Epson RX8581 RTC + * + * Author: Martyn Welch <martyn.welch@gefanuc.com> + * Copyright 2008 GE Fanuc Intelligent Platforms Embedded Systems, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Based on: rtc-pcf8563.c (An I2C driver for the Philips PCF8563 RTC) + * Copyright 2005-06 Tower Technologies + */ + +#include <linux/module.h> +#include <linux/i2c.h> +#include <linux/bcd.h> +#include <linux/rtc.h> +#include <linux/log2.h> + +#define DRV_VERSION "0.1" + +#define RX8581_REG_SC 0x00 /* Second in BCD */ +#define RX8581_REG_MN 0x01 /* Minute in BCD */ +#define RX8581_REG_HR 0x02 /* Hour in BCD */ +#define RX8581_REG_DW 0x03 /* Day of Week */ +#define RX8581_REG_DM 0x04 /* Day of Month in BCD */ +#define RX8581_REG_MO 0x05 /* Month in BCD */ +#define RX8581_REG_YR 0x06 /* Year in BCD */ +#define RX8581_REG_RAM 0x07 /* RAM */ +#define RX8581_REG_AMN 0x08 /* Alarm Min in BCD*/ +#define RX8581_REG_AHR 0x09 /* Alarm Hour in BCD */ +#define RX8581_REG_ADM 0x0A +#define RX8581_REG_ADW 0x0A +#define RX8581_REG_TMR0 0x0B +#define RX8581_REG_TMR1 0x0C +#define RX8581_REG_EXT 0x0D /* Extension Register */ +#define RX8581_REG_FLAG 0x0E /* Flag Register */ +#define RX8581_REG_CTRL 0x0F /* Control Register */ + + +/* Flag Register bit definitions */ +#define RX8581_FLAG_UF 0x20 /* Update */ +#define RX8581_FLAG_TF 0x10 /* Timer */ +#define RX8581_FLAG_AF 0x08 /* Alarm */ +#define RX8581_FLAG_VLF 0x02 /* Voltage Low */ + +/* Control Register bit definitions */ +#define RX8581_CTRL_UIE 0x20 /* Update Interrupt Enable */ +#define RX8581_CTRL_TIE 0x10 /* Timer Interrupt Enable */ +#define RX8581_CTRL_AIE 0x08 /* Alarm Interrupt Enable */ +#define RX8581_CTRL_STOP 0x02 /* STOP bit */ +#define RX8581_CTRL_RESET 0x01 /* RESET bit */ + +static struct i2c_driver rx8581_driver; + +/* + * In the routines that deal directly with the rx8581 hardware, we use + * rtc_time -- month 0-11, hour 0-23, yr = calendar year-epoch. + */ +static int rx8581_get_datetime(struct i2c_client *client, struct rtc_time *tm) +{ + unsigned char date[7]; + int data, err; + + /* First we ensure that the "update flag" is not set, we read the + * time and date then re-read the "update flag". If the update flag + * has been set, we know that the time has changed during the read so + * we repeat the whole process again. + */ + data = i2c_smbus_read_byte_data(client, RX8581_REG_FLAG); + if (data < 0) { + dev_err(&client->dev, "Unable to read device flags\n"); + return -EIO; + } + + do { + /* If update flag set, clear it */ + if (data & RX8581_FLAG_UF) { + err = i2c_smbus_write_byte_data(client, + RX8581_REG_FLAG, (data & ~RX8581_FLAG_UF)); + if (err != 0) { + dev_err(&client->dev, "Unable to write device " + "flags\n"); + return -EIO; + } + } + + /* Now read time and date */ + err = i2c_smbus_read_i2c_block_data(client, RX8581_REG_SC, + 7, date); + if (err < 0) { + dev_err(&client->dev, "Unable to read date\n"); + return -EIO; + } + + /* Check flag register */ + data = i2c_smbus_read_byte_data(client, RX8581_REG_FLAG); + if (data < 0) { + dev_err(&client->dev, "Unable to read device flags\n"); + return -EIO; + } + } while (data & RX8581_FLAG_UF); + + if (data & RX8581_FLAG_VLF) + dev_info(&client->dev, + "low voltage detected, date/time is not reliable.\n"); + + dev_dbg(&client->dev, + "%s: raw data is sec=%02x, min=%02x, hr=%02x, " + "wday=%02x, mday=%02x, mon=%02x, year=%02x\n", + __func__, + date[0], date[1], date[2], date[3], date[4], date[5], date[6]); + + tm->tm_sec = bcd2bin(date[RX8581_REG_SC] & 0x7F); + tm->tm_min = bcd2bin(date[RX8581_REG_MN] & 0x7F); + tm->tm_hour = bcd2bin(date[RX8581_REG_HR] & 0x3F); /* rtc hr 0-23 */ + tm->tm_wday = ilog2(date[RX8581_REG_DW] & 0x7F); + tm->tm_mday = bcd2bin(date[RX8581_REG_DM] & 0x3F); + tm->tm_mon = bcd2bin(date[RX8581_REG_MO] & 0x1F) - 1; /* rtc mn 1-12 */ + tm->tm_year = bcd2bin(date[RX8581_REG_YR]); + if (tm->tm_year < 70) + tm->tm_year += 100; /* assume we are in 1970...2069 */ + + + dev_dbg(&client->dev, "%s: tm is secs=%d, mins=%d, hours=%d, " + "mday=%d, mon=%d, year=%d, wday=%d\n", + __func__, + tm->tm_sec, tm->tm_min, tm->tm_hour, + tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday); + + err = rtc_valid_tm(tm); + if (err < 0) + dev_err(&client->dev, "retrieved date/time is not valid.\n"); + + return err; +} + +static int rx8581_set_datetime(struct i2c_client *client, struct rtc_time *tm) +{ + int data, err; + unsigned char buf[7]; + + dev_dbg(&client->dev, "%s: secs=%d, mins=%d, hours=%d, " + "mday=%d, mon=%d, year=%d, wday=%d\n", + __func__, + tm->tm_sec, tm->tm_min, tm->tm_hour, + tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday); + + /* hours, minutes and seconds */ + buf[RX8581_REG_SC] = bin2bcd(tm->tm_sec); + buf[RX8581_REG_MN] = bin2bcd(tm->tm_min); + buf[RX8581_REG_HR] = bin2bcd(tm->tm_hour); + + buf[RX8581_REG_DM] = bin2bcd(tm->tm_mday); + + /* month, 1 - 12 */ + buf[RX8581_REG_MO] = bin2bcd(tm->tm_mon + 1); + + /* year and century */ + buf[RX8581_REG_YR] = bin2bcd(tm->tm_year % 100); + buf[RX8581_REG_DW] = (0x1 << tm->tm_wday); + + /* Stop the clock */ + data = i2c_smbus_read_byte_data(client, RX8581_REG_CTRL); + if (data < 0) { + dev_err(&client->dev, "Unable to read control register\n"); + return -EIO; + } + + err = i2c_smbus_write_byte_data(client, RX8581_REG_FLAG, + (data | RX8581_CTRL_STOP)); + if (err < 0) { + dev_err(&client->dev, "Unable to write control register\n"); + return -EIO; + } + + /* write register's data */ + err = i2c_smbus_write_i2c_block_data(client, RX8581_REG_SC, 7, buf); + if (err < 0) { + dev_err(&client->dev, "Unable to write to date registers\n"); + return -EIO; + } + + /* Restart the clock */ + data = i2c_smbus_read_byte_data(client, RX8581_REG_CTRL); + if (data < 0) { + dev_err(&client->dev, "Unable to read control register\n"); + return -EIO; + } + + err = i2c_smbus_write_byte_data(client, RX8581_REG_FLAG, + (data | ~(RX8581_CTRL_STOP))); + if (err != 0) { + dev_err(&client->dev, "Unable to write control register\n"); + return -EIO; + } + + return 0; +} + +static int rx8581_rtc_read_time(struct device *dev, struct rtc_time *tm) +{ + return rx8581_get_datetime(to_i2c_client(dev), tm); +} + +static int rx8581_rtc_set_time(struct device *dev, struct rtc_time *tm) +{ + return rx8581_set_datetime(to_i2c_client(dev), tm); +} + +static const struct rtc_class_ops rx8581_rtc_ops = { + .read_time = rx8581_rtc_read_time, + .set_time = rx8581_rtc_set_time, +}; + +static int __devinit rx8581_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct rtc_device *rtc; + + dev_dbg(&client->dev, "%s\n", __func__); + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) + return -ENODEV; + + dev_info(&client->dev, "chip found, driver version " DRV_VERSION "\n"); + + rtc = rtc_device_register(rx8581_driver.driver.name, + &client->dev, &rx8581_rtc_ops, THIS_MODULE); + + if (IS_ERR(rtc)) + return PTR_ERR(rtc); + + i2c_set_clientdata(client, rtc); + + return 0; +} + +static int __devexit rx8581_remove(struct i2c_client *client) +{ + struct rtc_device *rtc = i2c_get_clientdata(client); + + rtc_device_unregister(rtc); + + return 0; +} + +static const struct i2c_device_id rx8581_id[] = { + { "rx8581", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, rx8581_id); + +static struct i2c_driver rx8581_driver = { + .driver = { + .name = "rtc-rx8581", + .owner = THIS_MODULE, + }, + .probe = rx8581_probe, + .remove = __devexit_p(rx8581_remove), + .id_table = rx8581_id, +}; + +static int __init rx8581_init(void) +{ + return i2c_add_driver(&rx8581_driver); +} + +static void __exit rx8581_exit(void) +{ + i2c_del_driver(&rx8581_driver); +} + +MODULE_AUTHOR("Martyn Welch <martyn.welch@gefanuc.com>"); +MODULE_DESCRIPTION("Epson RX-8581 RTC driver"); +MODULE_LICENSE("GPL"); +MODULE_VERSION(DRV_VERSION); + +module_init(rx8581_init); +module_exit(rx8581_exit); diff --git a/drivers/rtc/rtc-sun4v.c b/drivers/rtc/rtc-sun4v.c index 2012ccbb4a5..5b2261052a6 100644 --- a/drivers/rtc/rtc-sun4v.c +++ b/drivers/rtc/rtc-sun4v.c @@ -1,4 +1,4 @@ -/* rtc-sun4c.c: Hypervisor based RTC for SUN4V systems. +/* rtc-sun4v.c: Hypervisor based RTC for SUN4V systems. * * Copyright (C) 2008 David S. Miller <davem@davemloft.net> */ @@ -7,21 +7,11 @@ #include <linux/module.h> #include <linux/delay.h> #include <linux/init.h> -#include <linux/time.h> #include <linux/rtc.h> #include <linux/platform_device.h> #include <asm/hypervisor.h> -MODULE_AUTHOR("David S. Miller <davem@davemloft.net>"); -MODULE_DESCRIPTION("SUN4V RTC driver"); -MODULE_LICENSE("GPL"); - -struct sun4v_rtc { - struct rtc_device *rtc; - spinlock_t lock; -}; - static unsigned long hypervisor_get_time(void) { unsigned long ret, time; @@ -45,15 +35,7 @@ retry: static int sun4v_read_time(struct device *dev, struct rtc_time *tm) { - struct sun4v_rtc *p = dev_get_drvdata(dev); - unsigned long flags, secs; - - spin_lock_irqsave(&p->lock, flags); - secs = hypervisor_get_time(); - spin_unlock_irqrestore(&p->lock, flags); - - rtc_time_to_tm(secs, tm); - + rtc_time_to_tm(hypervisor_get_time(), tm); return 0; } @@ -80,19 +62,14 @@ retry: static int sun4v_set_time(struct device *dev, struct rtc_time *tm) { - struct sun4v_rtc *p = dev_get_drvdata(dev); - unsigned long flags, secs; + unsigned long secs; int err; err = rtc_tm_to_time(tm, &secs); if (err) return err; - spin_lock_irqsave(&p->lock, flags); - err = hypervisor_set_time(secs); - spin_unlock_irqrestore(&p->lock, flags); - - return err; + return hypervisor_set_time(secs); } static const struct rtc_class_ops sun4v_rtc_ops = { @@ -100,33 +77,22 @@ static const struct rtc_class_ops sun4v_rtc_ops = { .set_time = sun4v_set_time, }; -static int __devinit sun4v_rtc_probe(struct platform_device *pdev) +static int __init sun4v_rtc_probe(struct platform_device *pdev) { - struct sun4v_rtc *p = kzalloc(sizeof(*p), GFP_KERNEL); - - if (!p) - return -ENOMEM; - - spin_lock_init(&p->lock); - - p->rtc = rtc_device_register("sun4v", &pdev->dev, + struct rtc_device *rtc = rtc_device_register("sun4v", &pdev->dev, &sun4v_rtc_ops, THIS_MODULE); - if (IS_ERR(p->rtc)) { - int err = PTR_ERR(p->rtc); - kfree(p); - return err; - } - platform_set_drvdata(pdev, p); + if (IS_ERR(rtc)) + return PTR_ERR(rtc); + + platform_set_drvdata(pdev, rtc); return 0; } -static int __devexit sun4v_rtc_remove(struct platform_device *pdev) +static int __exit sun4v_rtc_remove(struct platform_device *pdev) { - struct sun4v_rtc *p = platform_get_drvdata(pdev); - - rtc_device_unregister(p->rtc); - kfree(p); + struct rtc_device *rtc = platform_get_drvdata(pdev); + rtc_device_unregister(rtc); return 0; } @@ -135,13 +101,12 @@ static struct platform_driver sun4v_rtc_driver = { .name = "rtc-sun4v", .owner = THIS_MODULE, }, - .probe = sun4v_rtc_probe, - .remove = __devexit_p(sun4v_rtc_remove), + .remove = __exit_p(sun4v_rtc_remove), }; static int __init sun4v_rtc_init(void) { - return platform_driver_register(&sun4v_rtc_driver); + return platform_driver_probe(&sun4v_rtc_driver, sun4v_rtc_probe); } static void __exit sun4v_rtc_exit(void) @@ -151,3 +116,7 @@ static void __exit sun4v_rtc_exit(void) module_init(sun4v_rtc_init); module_exit(sun4v_rtc_exit); + +MODULE_AUTHOR("David S. Miller <davem@davemloft.net>"); +MODULE_DESCRIPTION("SUN4V RTC driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/rtc/rtc-wm8350.c b/drivers/rtc/rtc-wm8350.c new file mode 100644 index 00000000000..5c5e3aa9138 --- /dev/null +++ b/drivers/rtc/rtc-wm8350.c @@ -0,0 +1,514 @@ +/* + * Real Time Clock driver for Wolfson Microelectronics WM8350 + * + * Copyright (C) 2007, 2008 Wolfson Microelectronics PLC. + * + * Author: Liam Girdwood + * linux@wolfsonmicro.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/time.h> +#include <linux/rtc.h> +#include <linux/bcd.h> +#include <linux/interrupt.h> +#include <linux/ioctl.h> +#include <linux/completion.h> +#include <linux/mfd/wm8350/rtc.h> +#include <linux/mfd/wm8350/core.h> +#include <linux/delay.h> +#include <linux/platform_device.h> + +#define WM8350_SET_ALM_RETRIES 5 +#define WM8350_SET_TIME_RETRIES 5 +#define WM8350_GET_TIME_RETRIES 5 + +#define to_wm8350_from_rtc_dev(d) container_of(d, struct wm8350, rtc.pdev.dev) + +/* + * Read current time and date in RTC + */ +static int wm8350_rtc_readtime(struct device *dev, struct rtc_time *tm) +{ + struct wm8350 *wm8350 = dev_get_drvdata(dev); + u16 time1[4], time2[4]; + int retries = WM8350_GET_TIME_RETRIES, ret; + + /* + * Read the time twice and compare. + * If time1 == time2, then time is valid else retry. + */ + do { + ret = wm8350_block_read(wm8350, WM8350_RTC_SECONDS_MINUTES, + 4, time1); + if (ret < 0) + return ret; + ret = wm8350_block_read(wm8350, WM8350_RTC_SECONDS_MINUTES, + 4, time2); + if (ret < 0) + return ret; + + if (memcmp(time1, time2, sizeof(time1)) == 0) { + tm->tm_sec = time1[0] & WM8350_RTC_SECS_MASK; + + tm->tm_min = (time1[0] & WM8350_RTC_MINS_MASK) + >> WM8350_RTC_MINS_SHIFT; + + tm->tm_hour = time1[1] & WM8350_RTC_HRS_MASK; + + tm->tm_wday = ((time1[1] >> WM8350_RTC_DAY_SHIFT) + & 0x7) - 1; + + tm->tm_mon = ((time1[2] & WM8350_RTC_MTH_MASK) + >> WM8350_RTC_MTH_SHIFT) - 1; + + tm->tm_mday = (time1[2] & WM8350_RTC_DATE_MASK); + + tm->tm_year = ((time1[3] & WM8350_RTC_YHUNDREDS_MASK) + >> WM8350_RTC_YHUNDREDS_SHIFT) * 100; + tm->tm_year += time1[3] & WM8350_RTC_YUNITS_MASK; + + tm->tm_yday = rtc_year_days(tm->tm_mday, tm->tm_mon, + tm->tm_year); + tm->tm_year -= 1900; + + dev_dbg(dev, "Read (%d left): %04x %04x %04x %04x\n", + retries, + time1[0], time1[1], time1[2], time1[3]); + + return 0; + } + } while (retries--); + + dev_err(dev, "timed out reading RTC time\n"); + return -EIO; +} + +/* + * Set current time and date in RTC + */ +static int wm8350_rtc_settime(struct device *dev, struct rtc_time *tm) +{ + struct wm8350 *wm8350 = dev_get_drvdata(dev); + u16 time[4]; + u16 rtc_ctrl; + int ret, retries = WM8350_SET_TIME_RETRIES; + + time[0] = tm->tm_sec; + time[0] |= tm->tm_min << WM8350_RTC_MINS_SHIFT; + time[1] = tm->tm_hour; + time[1] |= (tm->tm_wday + 1) << WM8350_RTC_DAY_SHIFT; + time[2] = tm->tm_mday; + time[2] |= (tm->tm_mon + 1) << WM8350_RTC_MTH_SHIFT; + time[3] = ((tm->tm_year + 1900) / 100) << WM8350_RTC_YHUNDREDS_SHIFT; + time[3] |= (tm->tm_year + 1900) % 100; + + dev_dbg(dev, "Setting: %04x %04x %04x %04x\n", + time[0], time[1], time[2], time[3]); + + /* Set RTC_SET to stop the clock */ + ret = wm8350_set_bits(wm8350, WM8350_RTC_TIME_CONTROL, WM8350_RTC_SET); + if (ret < 0) + return ret; + + /* Wait until confirmation of stopping */ + do { + rtc_ctrl = wm8350_reg_read(wm8350, WM8350_RTC_TIME_CONTROL); + schedule_timeout_uninterruptible(msecs_to_jiffies(1)); + } while (retries-- && !(rtc_ctrl & WM8350_RTC_STS)); + + if (!retries) { + dev_err(dev, "timed out on set confirmation\n"); + return -EIO; + } + + /* Write time to RTC */ + ret = wm8350_block_write(wm8350, WM8350_RTC_SECONDS_MINUTES, 4, time); + if (ret < 0) + return ret; + + /* Clear RTC_SET to start the clock */ + ret = wm8350_clear_bits(wm8350, WM8350_RTC_TIME_CONTROL, + WM8350_RTC_SET); + return ret; +} + +/* + * Read alarm time and date in RTC + */ +static int wm8350_rtc_readalarm(struct device *dev, struct rtc_wkalrm *alrm) +{ + struct wm8350 *wm8350 = dev_get_drvdata(dev); + struct rtc_time *tm = &alrm->time; + u16 time[4]; + int ret; + + ret = wm8350_block_read(wm8350, WM8350_ALARM_SECONDS_MINUTES, 4, time); + if (ret < 0) + return ret; + + tm->tm_sec = time[0] & WM8350_RTC_ALMSECS_MASK; + if (tm->tm_sec == WM8350_RTC_ALMSECS_MASK) + tm->tm_sec = -1; + + tm->tm_min = time[0] & WM8350_RTC_ALMMINS_MASK; + if (tm->tm_min == WM8350_RTC_ALMMINS_MASK) + tm->tm_min = -1; + else + tm->tm_min >>= WM8350_RTC_ALMMINS_SHIFT; + + tm->tm_hour = time[1] & WM8350_RTC_ALMHRS_MASK; + if (tm->tm_hour == WM8350_RTC_ALMHRS_MASK) + tm->tm_hour = -1; + + tm->tm_wday = ((time[1] >> WM8350_RTC_ALMDAY_SHIFT) & 0x7) - 1; + if (tm->tm_wday > 7) + tm->tm_wday = -1; + + tm->tm_mon = time[2] & WM8350_RTC_ALMMTH_MASK; + if (tm->tm_mon == WM8350_RTC_ALMMTH_MASK) + tm->tm_mon = -1; + else + tm->tm_mon = (tm->tm_mon >> WM8350_RTC_ALMMTH_SHIFT) - 1; + + tm->tm_mday = (time[2] & WM8350_RTC_ALMDATE_MASK); + if (tm->tm_mday == WM8350_RTC_ALMDATE_MASK) + tm->tm_mday = -1; + + tm->tm_year = -1; + + alrm->enabled = !(time[3] & WM8350_RTC_ALMSTS); + + return 0; +} + +static int wm8350_rtc_stop_alarm(struct wm8350 *wm8350) +{ + int retries = WM8350_SET_ALM_RETRIES; + u16 rtc_ctrl; + int ret; + + /* Set RTC_SET to stop the clock */ + ret = wm8350_set_bits(wm8350, WM8350_RTC_TIME_CONTROL, + WM8350_RTC_ALMSET); + if (ret < 0) + return ret; + + /* Wait until confirmation of stopping */ + do { + rtc_ctrl = wm8350_reg_read(wm8350, WM8350_RTC_TIME_CONTROL); + schedule_timeout_uninterruptible(msecs_to_jiffies(1)); + } while (retries-- && !(rtc_ctrl & WM8350_RTC_ALMSTS)); + + if (!(rtc_ctrl & WM8350_RTC_ALMSTS)) + return -ETIMEDOUT; + + return 0; +} + +static int wm8350_rtc_start_alarm(struct wm8350 *wm8350) +{ + int ret; + int retries = WM8350_SET_ALM_RETRIES; + u16 rtc_ctrl; + + ret = wm8350_clear_bits(wm8350, WM8350_RTC_TIME_CONTROL, + WM8350_RTC_ALMSET); + if (ret < 0) + return ret; + + /* Wait until confirmation */ + do { + rtc_ctrl = wm8350_reg_read(wm8350, WM8350_RTC_TIME_CONTROL); + schedule_timeout_uninterruptible(msecs_to_jiffies(1)); + } while (retries-- && rtc_ctrl & WM8350_RTC_ALMSTS); + + if (rtc_ctrl & WM8350_RTC_ALMSTS) + return -ETIMEDOUT; + + return 0; +} + +static int wm8350_rtc_setalarm(struct device *dev, struct rtc_wkalrm *alrm) +{ + struct wm8350 *wm8350 = dev_get_drvdata(dev); + struct rtc_time *tm = &alrm->time; + u16 time[3]; + int ret; + + memset(time, 0, sizeof(time)); + + if (tm->tm_sec != -1) + time[0] |= tm->tm_sec; + else + time[0] |= WM8350_RTC_ALMSECS_MASK; + + if (tm->tm_min != -1) + time[0] |= tm->tm_min << WM8350_RTC_ALMMINS_SHIFT; + else + time[0] |= WM8350_RTC_ALMMINS_MASK; + + if (tm->tm_hour != -1) + time[1] |= tm->tm_hour; + else + time[1] |= WM8350_RTC_ALMHRS_MASK; + + if (tm->tm_wday != -1) + time[1] |= (tm->tm_wday + 1) << WM8350_RTC_ALMDAY_SHIFT; + else + time[1] |= WM8350_RTC_ALMDAY_MASK; + + if (tm->tm_mday != -1) + time[2] |= tm->tm_mday; + else + time[2] |= WM8350_RTC_ALMDATE_MASK; + + if (tm->tm_mon != -1) + time[2] |= (tm->tm_mon + 1) << WM8350_RTC_ALMMTH_SHIFT; + else + time[2] |= WM8350_RTC_ALMMTH_MASK; + + ret = wm8350_rtc_stop_alarm(wm8350); + if (ret < 0) + return ret; + + /* Write time to RTC */ + ret = wm8350_block_write(wm8350, WM8350_ALARM_SECONDS_MINUTES, + 3, time); + if (ret < 0) + return ret; + + if (alrm->enabled) + ret = wm8350_rtc_start_alarm(wm8350); + + return ret; +} + +/* + * Handle commands from user-space + */ +static int wm8350_rtc_ioctl(struct device *dev, unsigned int cmd, + unsigned long arg) +{ + struct wm8350 *wm8350 = dev_get_drvdata(dev); + + switch (cmd) { + case RTC_AIE_OFF: + return wm8350_rtc_stop_alarm(wm8350); + case RTC_AIE_ON: + return wm8350_rtc_start_alarm(wm8350); + + case RTC_UIE_OFF: + wm8350_mask_irq(wm8350, WM8350_IRQ_RTC_SEC); + break; + case RTC_UIE_ON: + wm8350_unmask_irq(wm8350, WM8350_IRQ_RTC_SEC); + break; + + default: + return -ENOIOCTLCMD; + } + + return 0; +} + +static void wm8350_rtc_alarm_handler(struct wm8350 *wm8350, int irq, + void *data) +{ + struct rtc_device *rtc = wm8350->rtc.rtc; + int ret; + + rtc_update_irq(rtc, 1, RTC_IRQF | RTC_AF); + + /* Make it one shot */ + ret = wm8350_set_bits(wm8350, WM8350_RTC_TIME_CONTROL, + WM8350_RTC_ALMSET); + if (ret != 0) { + dev_err(&(wm8350->rtc.pdev->dev), + "Failed to disable alarm: %d\n", ret); + } +} + +static void wm8350_rtc_update_handler(struct wm8350 *wm8350, int irq, + void *data) +{ + struct rtc_device *rtc = wm8350->rtc.rtc; + + rtc_update_irq(rtc, 1, RTC_IRQF | RTC_UF); +} + +static const struct rtc_class_ops wm8350_rtc_ops = { + .ioctl = wm8350_rtc_ioctl, + .read_time = wm8350_rtc_readtime, + .set_time = wm8350_rtc_settime, + .read_alarm = wm8350_rtc_readalarm, + .set_alarm = wm8350_rtc_setalarm, +}; + +#ifdef CONFIG_PM +static int wm8350_rtc_suspend(struct platform_device *pdev, pm_message_t state) +{ + struct wm8350 *wm8350 = dev_get_drvdata(&pdev->dev); + int ret = 0; + u16 reg; + + reg = wm8350_reg_read(wm8350, WM8350_RTC_TIME_CONTROL); + + if (device_may_wakeup(&wm8350->rtc.pdev->dev) && + reg & WM8350_RTC_ALMSTS) { + ret = wm8350_rtc_stop_alarm(wm8350); + if (ret != 0) + dev_err(&pdev->dev, "Failed to stop RTC alarm: %d\n", + ret); + } + + return ret; +} + +static int wm8350_rtc_resume(struct platform_device *pdev) +{ + struct wm8350 *wm8350 = dev_get_drvdata(&pdev->dev); + int ret; + + if (wm8350->rtc.alarm_enabled) { + ret = wm8350_rtc_start_alarm(wm8350); + if (ret != 0) + dev_err(&pdev->dev, + "Failed to restart RTC alarm: %d\n", ret); + } + + return 0; +} + +#else +#define wm8350_rtc_suspend NULL +#define wm8350_rtc_resume NULL +#endif + +static int wm8350_rtc_probe(struct platform_device *pdev) +{ + struct wm8350 *wm8350 = platform_get_drvdata(pdev); + struct wm8350_rtc *wm_rtc = &wm8350->rtc; + int ret = 0; + u16 timectl, power5; + + timectl = wm8350_reg_read(wm8350, WM8350_RTC_TIME_CONTROL); + if (timectl & WM8350_RTC_BCD) { + dev_err(&pdev->dev, "RTC BCD mode not supported\n"); + return -EINVAL; + } + if (timectl & WM8350_RTC_12HR) { + dev_err(&pdev->dev, "RTC 12 hour mode not supported\n"); + return -EINVAL; + } + + /* enable the RTC if it's not already enabled */ + power5 = wm8350_reg_read(wm8350, WM8350_POWER_MGMT_5); + if (!(power5 & WM8350_RTC_TICK_ENA)) { + dev_info(wm8350->dev, "Starting RTC\n"); + + wm8350_reg_unlock(wm8350); + + ret = wm8350_set_bits(wm8350, WM8350_POWER_MGMT_5, + WM8350_RTC_TICK_ENA); + if (ret < 0) { + dev_err(&pdev->dev, "failed to enable RTC: %d\n", ret); + return ret; + } + + wm8350_reg_lock(wm8350); + } + + if (timectl & WM8350_RTC_STS) { + int retries; + + ret = wm8350_clear_bits(wm8350, WM8350_RTC_TIME_CONTROL, + WM8350_RTC_SET); + if (ret < 0) { + dev_err(&pdev->dev, "failed to start: %d\n", ret); + return ret; + } + + retries = WM8350_SET_TIME_RETRIES; + do { + timectl = wm8350_reg_read(wm8350, + WM8350_RTC_TIME_CONTROL); + } while (timectl & WM8350_RTC_STS && retries--); + + if (retries == 0) { + dev_err(&pdev->dev, "failed to start: timeout\n"); + return -ENODEV; + } + } + + device_init_wakeup(&pdev->dev, 1); + + wm_rtc->rtc = rtc_device_register("wm8350", &pdev->dev, + &wm8350_rtc_ops, THIS_MODULE); + if (IS_ERR(wm_rtc->rtc)) { + ret = PTR_ERR(wm_rtc->rtc); + dev_err(&pdev->dev, "failed to register RTC: %d\n", ret); + return ret; + } + + wm8350_mask_irq(wm8350, WM8350_IRQ_RTC_SEC); + wm8350_mask_irq(wm8350, WM8350_IRQ_RTC_PER); + + wm8350_register_irq(wm8350, WM8350_IRQ_RTC_SEC, + wm8350_rtc_update_handler, NULL); + + wm8350_register_irq(wm8350, WM8350_IRQ_RTC_ALM, + wm8350_rtc_alarm_handler, NULL); + wm8350_unmask_irq(wm8350, WM8350_IRQ_RTC_ALM); + + return 0; +} + +static int __devexit wm8350_rtc_remove(struct platform_device *pdev) +{ + struct wm8350 *wm8350 = platform_get_drvdata(pdev); + struct wm8350_rtc *wm_rtc = &wm8350->rtc; + + wm8350_mask_irq(wm8350, WM8350_IRQ_RTC_SEC); + + wm8350_free_irq(wm8350, WM8350_IRQ_RTC_SEC); + wm8350_free_irq(wm8350, WM8350_IRQ_RTC_ALM); + + rtc_device_unregister(wm_rtc->rtc); + + return 0; +} + +static struct platform_driver wm8350_rtc_driver = { + .probe = wm8350_rtc_probe, + .remove = __devexit_p(wm8350_rtc_remove), + .suspend = wm8350_rtc_suspend, + .resume = wm8350_rtc_resume, + .driver = { + .name = "wm8350-rtc", + }, +}; + +static int __init wm8350_rtc_init(void) +{ + return platform_driver_register(&wm8350_rtc_driver); +} +module_init(wm8350_rtc_init); + +static void __exit wm8350_rtc_exit(void) +{ + platform_driver_unregister(&wm8350_rtc_driver); +} +module_exit(wm8350_rtc_exit); + +MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>"); +MODULE_DESCRIPTION("RTC driver for the WM8350"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:wm8350-rtc"); diff --git a/drivers/s390/block/dasd.c b/drivers/s390/block/dasd.c index 4b76fca64a6..363bd1303d2 100644 --- a/drivers/s390/block/dasd.c +++ b/drivers/s390/block/dasd.c @@ -1746,6 +1746,11 @@ restart: goto restart; } + /* log sense for fatal error */ + if (cqr->status == DASD_CQR_FAILED) { + dasd_log_sense(cqr, &cqr->irb); + } + /* First of all call extended error reporting. */ if (dasd_eer_enabled(base) && cqr->status == DASD_CQR_FAILED) { diff --git a/drivers/s390/char/sclp_cmd.c b/drivers/s390/char/sclp_cmd.c index eb5f1b8bc57..ec9c0bcf66e 100644 --- a/drivers/s390/char/sclp_cmd.c +++ b/drivers/s390/char/sclp_cmd.c @@ -324,6 +324,9 @@ static int do_assign_storage(sclp_cmdw_t cmd, u16 rn) case 0x0120: break; default: + pr_warning("assign storage failed (cmd=0x%08x, " + "response=0x%04x, rn=0x%04x)\n", cmd, + sccb->header.response_code, rn); rc = -EIO; break; } diff --git a/drivers/s390/cio/device.c b/drivers/s390/cio/device.c index 4e78c82194b..4e4008325e2 100644 --- a/drivers/s390/cio/device.c +++ b/drivers/s390/cio/device.c @@ -874,11 +874,15 @@ void ccw_device_move_to_orphanage(struct work_struct *work) replacing_cdev = get_disc_ccwdev_by_dev_id(&dev_id, cdev); if (replacing_cdev) { sch_attach_disconnected_device(sch, replacing_cdev); + /* Release reference from get_disc_ccwdev_by_dev_id() */ + put_device(&cdev->dev); return; } replacing_cdev = get_orphaned_ccwdev_by_dev_id(css, &dev_id); if (replacing_cdev) { sch_attach_orphaned_device(sch, replacing_cdev); + /* Release reference from get_orphaned_ccwdev_by_dev_id() */ + put_device(&cdev->dev); return; } sch_create_and_recog_new_device(sch); diff --git a/drivers/s390/kvm/kvm_virtio.c b/drivers/s390/kvm/kvm_virtio.c index ff4a6931bb8..3d442444c61 100644 --- a/drivers/s390/kvm/kvm_virtio.c +++ b/drivers/s390/kvm/kvm_virtio.c @@ -322,13 +322,13 @@ static int __init kvm_devices_init(void) return rc; } - rc = vmem_add_mapping(PFN_PHYS(max_pfn), PAGE_SIZE); + rc = vmem_add_mapping(real_memory_size, PAGE_SIZE); if (rc) { s390_root_dev_unregister(kvm_root); return rc; } - kvm_devices = (void *) PFN_PHYS(max_pfn); + kvm_devices = (void *) real_memory_size; ctl_set_bit(0, 9); register_external_interrupt(0x2603, kvm_extint_handler); diff --git a/drivers/s390/scsi/zfcp_aux.c b/drivers/s390/scsi/zfcp_aux.c index 3b56220fb90..3d4e3e3f3fc 100644 --- a/drivers/s390/scsi/zfcp_aux.c +++ b/drivers/s390/scsi/zfcp_aux.c @@ -610,7 +610,8 @@ struct zfcp_port *zfcp_port_enqueue(struct zfcp_adapter *adapter, u64 wwpn, atomic_set_mask(status | ZFCP_STATUS_COMMON_REMOVE, &port->status); atomic_set(&port->refcount, 0); - dev_set_name(&port->sysfs_device, "0x%016llx", wwpn); + dev_set_name(&port->sysfs_device, "0x%016llx", + (unsigned long long)wwpn); port->sysfs_device.parent = &adapter->ccw_device->dev; port->sysfs_device.release = zfcp_sysfs_port_release; diff --git a/drivers/s390/scsi/zfcp_ccw.c b/drivers/s390/scsi/zfcp_ccw.c index b04038c7478..951a8d409d1 100644 --- a/drivers/s390/scsi/zfcp_ccw.c +++ b/drivers/s390/scsi/zfcp_ccw.c @@ -116,7 +116,9 @@ static int zfcp_ccw_set_online(struct ccw_device *ccw_device) zfcp_erp_adapter_reopen(adapter, ZFCP_STATUS_COMMON_ERP_FAILED, 85, NULL); zfcp_erp_wait(adapter); - goto out; + up(&zfcp_data.config_sema); + flush_work(&adapter->scan_work); + return 0; out_scsi_register: zfcp_erp_thread_kill(adapter); diff --git a/drivers/s390/scsi/zfcp_dbf.c b/drivers/s390/scsi/zfcp_dbf.c index 060f5f2352e..31012d58cfb 100644 --- a/drivers/s390/scsi/zfcp_dbf.c +++ b/drivers/s390/scsi/zfcp_dbf.c @@ -30,7 +30,7 @@ static void zfcp_dbf_hexdump(debug_info_t *dbf, void *to, int to_len, dump->offset = offset; dump->size = min(from_len - offset, room); memcpy(dump->data, from + offset, dump->size); - debug_event(dbf, level, dump, dump->size); + debug_event(dbf, level, dump, dump->size + sizeof(*dump)); } } @@ -108,7 +108,7 @@ static int zfcp_dbf_view_header(debug_info_t *id, struct debug_view *view, t.tv_sec, t.tv_nsec); zfcp_dbf_out(&p, "cpu", "%02i", entry->id.fields.cpuid); } else { - zfcp_dbf_outd(&p, NULL, dump->data, dump->size, dump->offset, + zfcp_dbf_outd(&p, "", dump->data, dump->size, dump->offset, dump->total_size); if ((dump->offset + dump->size) == dump->total_size) p += sprintf(p, "\n"); @@ -366,6 +366,7 @@ static void zfcp_hba_dbf_view_response(char **p, break; zfcp_dbf_out(p, "scsi_cmnd", "0x%0Lx", r->u.fcp.cmnd); zfcp_dbf_out(p, "scsi_serial", "0x%016Lx", r->u.fcp.serial); + p += sprintf(*p, "\n"); break; case FSF_QTCB_OPEN_PORT_WITH_DID: @@ -465,7 +466,8 @@ static int zfcp_hba_dbf_view_format(debug_info_t *id, struct debug_view *view, else if (strncmp(r->tag, "berr", ZFCP_DBF_TAG_SIZE) == 0) zfcp_hba_dbf_view_berr(&p, &r->u.berr); - p += sprintf(p, "\n"); + if (strncmp(r->tag, "resp", ZFCP_DBF_TAG_SIZE) != 0) + p += sprintf(p, "\n"); return p - out_buf; } @@ -880,6 +882,7 @@ void zfcp_san_dbf_event_ct_request(struct zfcp_fsf_req *fsf_req) struct ct_hdr *hdr = sg_virt(ct->req); struct zfcp_san_dbf_record *r = &adapter->san_dbf_buf; struct zfcp_san_dbf_record_ct_request *oct = &r->u.ct_req; + int level = 3; unsigned long flags; spin_lock_irqsave(&adapter->san_dbf_lock, flags); @@ -896,9 +899,10 @@ void zfcp_san_dbf_event_ct_request(struct zfcp_fsf_req *fsf_req) oct->options = hdr->options; oct->max_res_size = hdr->max_res_size; oct->len = min((int)ct->req->length - (int)sizeof(struct ct_hdr), - ZFCP_DBF_CT_PAYLOAD); - memcpy(oct->payload, (void *)hdr + sizeof(struct ct_hdr), oct->len); - debug_event(adapter->san_dbf, 3, r, sizeof(*r)); + ZFCP_DBF_SAN_MAX_PAYLOAD); + debug_event(adapter->san_dbf, level, r, sizeof(*r)); + zfcp_dbf_hexdump(adapter->san_dbf, r, sizeof(*r), level, + (void *)hdr + sizeof(struct ct_hdr), oct->len); spin_unlock_irqrestore(&adapter->san_dbf_lock, flags); } @@ -914,6 +918,7 @@ void zfcp_san_dbf_event_ct_response(struct zfcp_fsf_req *fsf_req) struct ct_hdr *hdr = sg_virt(ct->resp); struct zfcp_san_dbf_record *r = &adapter->san_dbf_buf; struct zfcp_san_dbf_record_ct_response *rct = &r->u.ct_resp; + int level = 3; unsigned long flags; spin_lock_irqsave(&adapter->san_dbf_lock, flags); @@ -929,9 +934,10 @@ void zfcp_san_dbf_event_ct_response(struct zfcp_fsf_req *fsf_req) rct->expl = hdr->reason_code_expl; rct->vendor_unique = hdr->vendor_unique; rct->len = min((int)ct->resp->length - (int)sizeof(struct ct_hdr), - ZFCP_DBF_CT_PAYLOAD); - memcpy(rct->payload, (void *)hdr + sizeof(struct ct_hdr), rct->len); - debug_event(adapter->san_dbf, 3, r, sizeof(*r)); + ZFCP_DBF_SAN_MAX_PAYLOAD); + debug_event(adapter->san_dbf, level, r, sizeof(*r)); + zfcp_dbf_hexdump(adapter->san_dbf, r, sizeof(*r), level, + (void *)hdr + sizeof(struct ct_hdr), rct->len); spin_unlock_irqrestore(&adapter->san_dbf_lock, flags); } @@ -954,7 +960,7 @@ static void zfcp_san_dbf_event_els(const char *tag, int level, rec->u.els.ls_code = ls_code; debug_event(adapter->san_dbf, level, rec, sizeof(*rec)); zfcp_dbf_hexdump(adapter->san_dbf, rec, sizeof(*rec), level, - buffer, min(buflen, ZFCP_DBF_ELS_MAX_PAYLOAD)); + buffer, min(buflen, ZFCP_DBF_SAN_MAX_PAYLOAD)); spin_unlock_irqrestore(&adapter->san_dbf_lock, flags); } @@ -1008,8 +1014,6 @@ static int zfcp_san_dbf_view_format(debug_info_t *id, struct debug_view *view, char *out_buf, const char *in_buf) { struct zfcp_san_dbf_record *r = (struct zfcp_san_dbf_record *)in_buf; - char *buffer = NULL; - int buflen = 0, total = 0; char *p = out_buf; if (strncmp(r->tag, "dump", ZFCP_DBF_TAG_SIZE) == 0) @@ -1029,9 +1033,6 @@ static int zfcp_san_dbf_view_format(debug_info_t *id, struct debug_view *view, zfcp_dbf_out(&p, "gs_subtype", "0x%02x", ct->gs_subtype); zfcp_dbf_out(&p, "options", "0x%02x", ct->options); zfcp_dbf_out(&p, "max_res_size", "0x%04x", ct->max_res_size); - total = ct->len; - buffer = ct->payload; - buflen = min(total, ZFCP_DBF_CT_PAYLOAD); } else if (strncmp(r->tag, "rctc", ZFCP_DBF_TAG_SIZE) == 0) { struct zfcp_san_dbf_record_ct_response *ct = &r->u.ct_resp; zfcp_dbf_out(&p, "cmd_rsp_code", "0x%04x", ct->cmd_rsp_code); @@ -1039,23 +1040,12 @@ static int zfcp_san_dbf_view_format(debug_info_t *id, struct debug_view *view, zfcp_dbf_out(&p, "reason_code", "0x%02x", ct->reason_code); zfcp_dbf_out(&p, "reason_code_expl", "0x%02x", ct->expl); zfcp_dbf_out(&p, "vendor_unique", "0x%02x", ct->vendor_unique); - total = ct->len; - buffer = ct->payload; - buflen = min(total, ZFCP_DBF_CT_PAYLOAD); } else if (strncmp(r->tag, "oels", ZFCP_DBF_TAG_SIZE) == 0 || strncmp(r->tag, "rels", ZFCP_DBF_TAG_SIZE) == 0 || strncmp(r->tag, "iels", ZFCP_DBF_TAG_SIZE) == 0) { struct zfcp_san_dbf_record_els *els = &r->u.els; zfcp_dbf_out(&p, "ls_code", "0x%02x", els->ls_code); - total = els->len; - buffer = els->payload; - buflen = min(total, ZFCP_DBF_ELS_PAYLOAD); } - - zfcp_dbf_outd(&p, "payload", buffer, buflen, 0, total); - if (buflen == total) - p += sprintf(p, "\n"); - return p - out_buf; } diff --git a/drivers/s390/scsi/zfcp_dbf.h b/drivers/s390/scsi/zfcp_dbf.h index e8f450801fe..5d6b2dff855 100644 --- a/drivers/s390/scsi/zfcp_dbf.h +++ b/drivers/s390/scsi/zfcp_dbf.h @@ -163,8 +163,6 @@ struct zfcp_san_dbf_record_ct_request { u8 options; u16 max_res_size; u32 len; -#define ZFCP_DBF_CT_PAYLOAD 24 - u8 payload[ZFCP_DBF_CT_PAYLOAD]; } __attribute__ ((packed)); struct zfcp_san_dbf_record_ct_response { @@ -174,15 +172,11 @@ struct zfcp_san_dbf_record_ct_response { u8 expl; u8 vendor_unique; u32 len; - u8 payload[ZFCP_DBF_CT_PAYLOAD]; } __attribute__ ((packed)); struct zfcp_san_dbf_record_els { u8 ls_code; u32 len; -#define ZFCP_DBF_ELS_PAYLOAD 32 -#define ZFCP_DBF_ELS_MAX_PAYLOAD 1024 - u8 payload[ZFCP_DBF_ELS_PAYLOAD]; } __attribute__ ((packed)); struct zfcp_san_dbf_record { @@ -196,6 +190,8 @@ struct zfcp_san_dbf_record { struct zfcp_san_dbf_record_ct_response ct_resp; struct zfcp_san_dbf_record_els els; } u; +#define ZFCP_DBF_SAN_MAX_PAYLOAD 1024 + u8 payload[32]; } __attribute__ ((packed)); struct zfcp_scsi_dbf_record { diff --git a/drivers/s390/scsi/zfcp_erp.c b/drivers/s390/scsi/zfcp_erp.c index 9040f738ff3..35364f64da7 100644 --- a/drivers/s390/scsi/zfcp_erp.c +++ b/drivers/s390/scsi/zfcp_erp.c @@ -472,6 +472,7 @@ static void zfcp_erp_strategy_check_fsfreq(struct zfcp_erp_action *act) ZFCP_STATUS_ERP_TIMEDOUT)) { act->fsf_req->status |= ZFCP_STATUS_FSFREQ_DISMISSED; zfcp_rec_dbf_event_action(142, act); + act->fsf_req->erp_action = NULL; } if (act->status & ZFCP_STATUS_ERP_TIMEDOUT) zfcp_rec_dbf_event_action(143, act); diff --git a/drivers/s390/scsi/zfcp_fsf.c b/drivers/s390/scsi/zfcp_fsf.c index 5ae1d497e5e..d024442ee12 100644 --- a/drivers/s390/scsi/zfcp_fsf.c +++ b/drivers/s390/scsi/zfcp_fsf.c @@ -683,6 +683,7 @@ static struct zfcp_fsf_req *zfcp_fsf_alloc_noqtcb(mempool_t *pool) if (!req) return NULL; memset(req, 0, sizeof(*req)); + req->pool = pool; return req; } @@ -769,28 +770,24 @@ static struct zfcp_fsf_req *zfcp_fsf_req_create(struct zfcp_adapter *adapter, static int zfcp_fsf_req_send(struct zfcp_fsf_req *req) { struct zfcp_adapter *adapter = req->adapter; - struct zfcp_qdio_queue *req_q = &adapter->req_q; + unsigned long flags; int idx; /* put allocated FSF request into hash table */ - spin_lock(&adapter->req_list_lock); + spin_lock_irqsave(&adapter->req_list_lock, flags); idx = zfcp_reqlist_hash(req->req_id); list_add_tail(&req->list, &adapter->req_list[idx]); - spin_unlock(&adapter->req_list_lock); + spin_unlock_irqrestore(&adapter->req_list_lock, flags); - req->qdio_outb_usage = atomic_read(&req_q->count); + req->qdio_outb_usage = atomic_read(&adapter->req_q.count); req->issued = get_clock(); if (zfcp_qdio_send(req)) { - /* Queues are down..... */ del_timer(&req->timer); - spin_lock(&adapter->req_list_lock); - zfcp_reqlist_remove(adapter, req); - spin_unlock(&adapter->req_list_lock); - /* undo changes in request queue made for this request */ - atomic_add(req->sbal_number, &req_q->count); - req_q->first -= req->sbal_number; - req_q->first += QDIO_MAX_BUFFERS_PER_Q; - req_q->first %= QDIO_MAX_BUFFERS_PER_Q; /* wrap */ + spin_lock_irqsave(&adapter->req_list_lock, flags); + /* lookup request again, list might have changed */ + if (zfcp_reqlist_find_safe(adapter, req)) + zfcp_reqlist_remove(adapter, req); + spin_unlock_irqrestore(&adapter->req_list_lock, flags); zfcp_erp_adapter_reopen(adapter, 0, 116, req); return -EIO; } diff --git a/drivers/s390/scsi/zfcp_scsi.c b/drivers/s390/scsi/zfcp_scsi.c index ca8f85f3dad..e46fd3e9f68 100644 --- a/drivers/s390/scsi/zfcp_scsi.c +++ b/drivers/s390/scsi/zfcp_scsi.c @@ -24,14 +24,10 @@ char *zfcp_get_fcp_sns_info_ptr(struct fcp_rsp_iu *fcp_rsp_iu) static void zfcp_scsi_slave_destroy(struct scsi_device *sdpnt) { struct zfcp_unit *unit = (struct zfcp_unit *) sdpnt->hostdata; - WARN_ON(!unit); - if (unit) { - atomic_clear_mask(ZFCP_STATUS_UNIT_REGISTERED, &unit->status); - sdpnt->hostdata = NULL; - unit->device = NULL; - zfcp_erp_unit_failed(unit, 12, NULL); - zfcp_unit_put(unit); - } + atomic_clear_mask(ZFCP_STATUS_UNIT_REGISTERED, &unit->status); + unit->device = NULL; + zfcp_erp_unit_failed(unit, 12, NULL); + zfcp_unit_put(unit); } static int zfcp_scsi_slave_configure(struct scsi_device *sdp) diff --git a/drivers/scsi/dpt_i2o.c b/drivers/scsi/dpt_i2o.c index 8aba4fdfb52..6194ed5d02c 100644 --- a/drivers/scsi/dpt_i2o.c +++ b/drivers/scsi/dpt_i2o.c @@ -2445,7 +2445,7 @@ static s32 adpt_i2o_to_scsi(void __iomem *reply, struct scsi_cmnd* cmd) hba_status = detailed_status >> 8; // calculate resid for sg - scsi_set_resid(cmd, scsi_bufflen(cmd) - readl(reply+5)); + scsi_set_resid(cmd, scsi_bufflen(cmd) - readl(reply+20)); pHba = (adpt_hba*) cmd->device->host->hostdata[0]; @@ -2456,7 +2456,7 @@ static s32 adpt_i2o_to_scsi(void __iomem *reply, struct scsi_cmnd* cmd) case I2O_SCSI_DSC_SUCCESS: cmd->result = (DID_OK << 16); // handle underflow - if(readl(reply+5) < cmd->underflow ) { + if (readl(reply+20) < cmd->underflow) { cmd->result = (DID_ERROR <<16); printk(KERN_WARNING"%s: SCSI CMD underflow\n",pHba->name); } diff --git a/drivers/scsi/megaraid.c b/drivers/scsi/megaraid.c index 28c9da7d4a5..7dc62deb408 100644 --- a/drivers/scsi/megaraid.c +++ b/drivers/scsi/megaraid.c @@ -4402,6 +4402,10 @@ mega_internal_command(adapter_t *adapter, megacmd_t *mc, mega_passthru *pthru) scb_t *scb; int rval; + scmd = scsi_allocate_command(GFP_KERNEL); + if (!scmd) + return -ENOMEM; + /* * The internal commands share one command id and hence are * serialized. This is so because we want to reserve maximum number of @@ -4412,12 +4416,11 @@ mega_internal_command(adapter_t *adapter, megacmd_t *mc, mega_passthru *pthru) scb = &adapter->int_scb; memset(scb, 0, sizeof(scb_t)); - scmd = &adapter->int_scmd; - memset(scmd, 0, sizeof(Scsi_Cmnd)); - sdev = kzalloc(sizeof(struct scsi_device), GFP_KERNEL); scmd->device = sdev; + memset(adapter->int_cdb, 0, sizeof(adapter->int_cdb)); + scmd->cmnd = adapter->int_cdb; scmd->device->host = adapter->host; scmd->host_scribble = (void *)scb; scmd->cmnd[0] = MEGA_INTERNAL_CMD; @@ -4456,6 +4459,8 @@ mega_internal_command(adapter_t *adapter, megacmd_t *mc, mega_passthru *pthru) mutex_unlock(&adapter->int_mtx); + scsi_free_command(GFP_KERNEL, scmd); + return rval; } diff --git a/drivers/scsi/megaraid.h b/drivers/scsi/megaraid.h index ee70bd4ae4b..795201fa0b4 100644 --- a/drivers/scsi/megaraid.h +++ b/drivers/scsi/megaraid.h @@ -888,8 +888,8 @@ typedef struct { u8 sglen; /* f/w supported scatter-gather list length */ + unsigned char int_cdb[MAX_COMMAND_SIZE]; scb_t int_scb; - Scsi_Cmnd int_scmd; struct mutex int_mtx; /* To synchronize the internal commands */ struct completion int_waitq; /* wait queue for internal diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h index f25f41a499e..b97194096d8 100644 --- a/drivers/scsi/qla2xxx/qla_def.h +++ b/drivers/scsi/qla2xxx/qla_def.h @@ -2547,7 +2547,6 @@ typedef struct scsi_qla_host { uint8_t fcode_revision[16]; uint32_t fw_revision[4]; - uint16_t fdt_odd_index; uint32_t fdt_wrt_disable; uint32_t fdt_erase_cmd; uint32_t fdt_block_size; diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c index a470f2d3270..4218f20f5ed 100644 --- a/drivers/scsi/qla2xxx/qla_init.c +++ b/drivers/scsi/qla2xxx/qla_init.c @@ -140,7 +140,6 @@ int qla2100_pci_config(scsi_qla_host_t *ha) { uint16_t w; - uint32_t d; unsigned long flags; struct device_reg_2xxx __iomem *reg = &ha->iobase->isp; @@ -151,10 +150,7 @@ qla2100_pci_config(scsi_qla_host_t *ha) w |= (PCI_COMMAND_PARITY | PCI_COMMAND_SERR); pci_write_config_word(ha->pdev, PCI_COMMAND, w); - /* Reset expansion ROM address decode enable */ - pci_read_config_dword(ha->pdev, PCI_ROM_ADDRESS, &d); - d &= ~PCI_ROM_ADDRESS_ENABLE; - pci_write_config_dword(ha->pdev, PCI_ROM_ADDRESS, d); + pci_disable_rom(ha->pdev); /* Get PCI bus information. */ spin_lock_irqsave(&ha->hardware_lock, flags); @@ -174,7 +170,6 @@ int qla2300_pci_config(scsi_qla_host_t *ha) { uint16_t w; - uint32_t d; unsigned long flags = 0; uint32_t cnt; struct device_reg_2xxx __iomem *reg = &ha->iobase->isp; @@ -236,10 +231,7 @@ qla2300_pci_config(scsi_qla_host_t *ha) pci_write_config_byte(ha->pdev, PCI_LATENCY_TIMER, 0x80); - /* Reset expansion ROM address decode enable */ - pci_read_config_dword(ha->pdev, PCI_ROM_ADDRESS, &d); - d &= ~PCI_ROM_ADDRESS_ENABLE; - pci_write_config_dword(ha->pdev, PCI_ROM_ADDRESS, d); + pci_disable_rom(ha->pdev); /* Get PCI bus information. */ spin_lock_irqsave(&ha->hardware_lock, flags); @@ -259,7 +251,6 @@ int qla24xx_pci_config(scsi_qla_host_t *ha) { uint16_t w; - uint32_t d; unsigned long flags = 0; struct device_reg_24xx __iomem *reg = &ha->iobase->isp24; @@ -281,10 +272,7 @@ qla24xx_pci_config(scsi_qla_host_t *ha) if (pci_find_capability(ha->pdev, PCI_CAP_ID_EXP)) pcie_set_readrq(ha->pdev, 2048); - /* Reset expansion ROM address decode enable */ - pci_read_config_dword(ha->pdev, PCI_ROM_ADDRESS, &d); - d &= ~PCI_ROM_ADDRESS_ENABLE; - pci_write_config_dword(ha->pdev, PCI_ROM_ADDRESS, d); + pci_disable_rom(ha->pdev); ha->chip_revision = ha->pdev->revision; @@ -306,7 +294,6 @@ int qla25xx_pci_config(scsi_qla_host_t *ha) { uint16_t w; - uint32_t d; pci_set_master(ha->pdev); pci_try_set_mwi(ha->pdev); @@ -320,10 +307,7 @@ qla25xx_pci_config(scsi_qla_host_t *ha) if (pci_find_capability(ha->pdev, PCI_CAP_ID_EXP)) pcie_set_readrq(ha->pdev, 2048); - /* Reset expansion ROM address decode enable */ - pci_read_config_dword(ha->pdev, PCI_ROM_ADDRESS, &d); - d &= ~PCI_ROM_ADDRESS_ENABLE; - pci_write_config_dword(ha->pdev, PCI_ROM_ADDRESS, d); + pci_disable_rom(ha->pdev); ha->chip_revision = ha->pdev->revision; @@ -980,7 +964,6 @@ qla2x00_setup_chip(scsi_qla_host_t *ha) &ha->fw_minor_version, &ha->fw_subminor_version, &ha->fw_attributes, &ha->fw_memory_size); - qla2x00_resize_request_q(ha); ha->flags.npiv_supported = 0; if ((IS_QLA24XX(ha) || IS_QLA25XX(ha) || IS_QLA84XX(ha)) && @@ -992,6 +975,7 @@ qla2x00_setup_chip(scsi_qla_host_t *ha) ha->max_npiv_vports = MIN_MULTI_ID_FABRIC - 1; } + qla2x00_resize_request_q(ha); if (ql2xallocfwdump) qla2x00_alloc_fw_dump(ha); diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c index 36bc6851e23..3402746ec12 100644 --- a/drivers/scsi/qla2xxx/qla_mbx.c +++ b/drivers/scsi/qla2xxx/qla_mbx.c @@ -1964,7 +1964,7 @@ qla2x00_get_resource_cnts(scsi_qla_host_t *ha, uint16_t *cur_xchg_cnt, *cur_iocb_cnt = mcp->mb[7]; if (orig_iocb_cnt) *orig_iocb_cnt = mcp->mb[10]; - if (max_npiv_vports) + if (ha->flags.npiv_supported && max_npiv_vports) *max_npiv_vports = mcp->mb[11]; } diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index 21dd182ad51..35567203ef6 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -728,6 +728,7 @@ qla2xxx_eh_abort(struct scsi_cmnd *cmd) if (ha->isp_ops->abort_command(ha, sp)) { DEBUG2(printk("%s(%ld): abort_command " "mbx failed.\n", __func__, ha->host_no)); + ret = FAILED; } else { DEBUG3(printk("%s(%ld): abort_command " "mbx success.\n", __func__, ha->host_no)); diff --git a/drivers/scsi/qla2xxx/qla_sup.c b/drivers/scsi/qla2xxx/qla_sup.c index 90a13211717..e4af678eb2d 100644 --- a/drivers/scsi/qla2xxx/qla_sup.c +++ b/drivers/scsi/qla2xxx/qla_sup.c @@ -722,6 +722,7 @@ done: static void qla2xxx_get_fdt_info(scsi_qla_host_t *ha) { +#define FLASH_BLK_SIZE_4K 0x1000 #define FLASH_BLK_SIZE_32K 0x8000 #define FLASH_BLK_SIZE_64K 0x10000 const char *loc, *locations[] = { "MID", "FDT" }; @@ -755,7 +756,6 @@ qla2xxx_get_fdt_info(scsi_qla_host_t *ha) loc = locations[1]; mid = le16_to_cpu(fdt->man_id); fid = le16_to_cpu(fdt->id); - ha->fdt_odd_index = mid == 0x1f; ha->fdt_wrt_disable = fdt->wrt_disable_bits; ha->fdt_erase_cmd = flash_conf_to_access_addr(0x0300 | fdt->erase_cmd); ha->fdt_block_size = le32_to_cpu(fdt->block_size); @@ -788,8 +788,7 @@ no_flash_data: ha->fdt_block_size = FLASH_BLK_SIZE_64K; break; case 0x1f: /* Atmel 26DF081A. */ - ha->fdt_odd_index = 1; - ha->fdt_block_size = FLASH_BLK_SIZE_64K; + ha->fdt_block_size = FLASH_BLK_SIZE_4K; ha->fdt_erase_cmd = flash_conf_to_access_addr(0x0320); ha->fdt_unprotect_sec_cmd = flash_conf_to_access_addr(0x0339); ha->fdt_protect_sec_cmd = flash_conf_to_access_addr(0x0336); @@ -801,9 +800,9 @@ no_flash_data: } done: DEBUG2(qla_printk(KERN_DEBUG, ha, "FDT[%s]: (0x%x/0x%x) erase=0x%x " - "pro=%x upro=%x idx=%d wrtd=0x%x blk=0x%x.\n", loc, mid, fid, + "pro=%x upro=%x wrtd=0x%x blk=0x%x.\n", loc, mid, fid, ha->fdt_erase_cmd, ha->fdt_protect_sec_cmd, - ha->fdt_unprotect_sec_cmd, ha->fdt_odd_index, ha->fdt_wrt_disable, + ha->fdt_unprotect_sec_cmd, ha->fdt_wrt_disable, ha->fdt_block_size)); } @@ -987,13 +986,9 @@ qla24xx_write_flash_data(scsi_qla_host_t *ha, uint32_t *dwptr, uint32_t faddr, qla24xx_unprotect_flash(ha); for (liter = 0; liter < dwords; liter++, faddr++, dwptr++) { - if (ha->fdt_odd_index) { - findex = faddr << 2; - fdata = findex & sec_mask; - } else { - findex = faddr; - fdata = (findex & sec_mask) << 2; - } + + findex = faddr; + fdata = (findex & sec_mask) << 2; /* Are we at the beginning of a sector? */ if ((findex & rest_addr) == 0) { diff --git a/drivers/scsi/qla2xxx/qla_version.h b/drivers/scsi/qla2xxx/qla_version.h index be5e299df52..eea6720adf1 100644 --- a/drivers/scsi/qla2xxx/qla_version.h +++ b/drivers/scsi/qla2xxx/qla_version.h @@ -7,7 +7,7 @@ /* * Driver version */ -#define QLA2XXX_VERSION "8.02.01-k8" +#define QLA2XXX_VERSION "8.02.01-k9" #define QLA_DRIVER_MAJOR_VER 8 #define QLA_DRIVER_MINOR_VER 2 diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c index 94ed262bdf0..386361778eb 100644 --- a/drivers/scsi/scsi_error.c +++ b/drivers/scsi/scsi_error.c @@ -1340,9 +1340,10 @@ int scsi_decide_disposition(struct scsi_cmnd *scmd) * LLD/transport was disrupted during processing of the IO. * The transport class is now blocked/blocking, * and the transport will decide what to do with the IO - * based on its timers and recovery capablilities. + * based on its timers and recovery capablilities if + * there are enough retries. */ - return ADD_TO_MLQUEUE; + goto maybe_retry; case DID_TRANSPORT_FAILFAST: /* * The transport decided to failfast the IO (most likely diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c index 5c0f32c7fbf..165fc010978 100644 --- a/drivers/serial/sh-sci.c +++ b/drivers/serial/sh-sci.c @@ -144,9 +144,9 @@ static void put_char(struct uart_port *port, char c) status = sci_in(port, SCxSR); } while (!(status & SCxSR_TDxE(port))); - sci_out(port, SCxTDR, c); sci_in(port, SCxSR); /* Dummy read */ sci_out(port, SCxSR, SCxSR_TDxE_CLEAR(port)); + sci_out(port, SCxTDR, c); spin_unlock_irqrestore(&port->lock, flags); } @@ -478,10 +478,10 @@ static void sci_transmit_chars(struct uart_port *port) return; } - if (port->type == PORT_SCIF) - count = scif_txroom(port); - else + if (port->type == PORT_SCI) count = sci_txroom(port); + else + count = scif_txroom(port); do { unsigned char c; @@ -510,7 +510,7 @@ static void sci_transmit_chars(struct uart_port *port) } else { ctrl = sci_in(port, SCSCR); - if (port->type == PORT_SCIF) { + if (port->type != PORT_SCI) { sci_in(port, SCxSR); /* Dummy read */ sci_out(port, SCxSR, SCxSR_TDxE_CLEAR(port)); } @@ -536,10 +536,10 @@ static inline void sci_receive_chars(struct uart_port *port) return; while (1) { - if (port->type == PORT_SCIF) - count = scif_rxroom(port); - else + if (port->type == PORT_SCI) count = sci_rxroom(port); + else + count = scif_rxroom(port); /* Don't copy more bytes than there is room for in the buffer */ count = tty_buffer_request_room(tty, count); @@ -714,7 +714,7 @@ static inline int sci_handle_breaks(struct uart_port *port) #if defined(SCIF_ORER) /* XXX: Handle SCIF overrun error */ - if (port->type == PORT_SCIF && (sci_in(port, SCLSR) & SCIF_ORER) != 0) { + if (port->type != PORT_SCI && (sci_in(port, SCLSR) & SCIF_ORER) != 0) { sci_out(port, SCLSR, 0); if (tty_insert_flip_char(tty, 0, TTY_OVERRUN)) { copied++; @@ -1042,7 +1042,7 @@ static void sci_set_termios(struct uart_port *port, struct ktermios *termios, sci_out(port, SCSCR, 0x00); /* TE=0, RE=0, CKE1=0 */ - if (port->type == PORT_SCIF) + if (port->type != PORT_SCI) sci_out(port, SCFCR, SCFCR_RFRST | SCFCR_TFRST); smr_val = sci_in(port, SCSMR) & 3; @@ -1085,6 +1085,7 @@ static const char *sci_type(struct uart_port *port) case PORT_SCI: return "sci"; case PORT_SCIF: return "scif"; case PORT_IRDA: return "irda"; + case PORT_SCIFA: return "scifa"; } return NULL; @@ -1112,6 +1113,7 @@ static void sci_config_port(struct uart_port *port, int flags) s->init_pins = sci_init_pins_sci; break; case PORT_SCIF: + case PORT_SCIFA: s->init_pins = sci_init_pins_scif; break; case PORT_IRDA: diff --git a/drivers/serial/sh-sci.h b/drivers/serial/sh-sci.h index 6163a45f968..9f33b064172 100644 --- a/drivers/serial/sh-sci.h +++ b/drivers/serial/sh-sci.h @@ -289,18 +289,18 @@ #define CPU_SCIx_FNS(name, sci_offset, sci_size, scif_offset, scif_size)\ static inline unsigned int sci_##name##_in(struct uart_port *port) \ { \ - if (port->type == PORT_SCI) { \ - SCI_IN(sci_size, sci_offset) \ - } else { \ - SCI_IN(scif_size, scif_offset); \ + if (port->type == PORT_SCIF) { \ + SCI_IN(scif_size, scif_offset) \ + } else { /* PORT_SCI or PORT_SCIFA */ \ + SCI_IN(sci_size, sci_offset); \ } \ } \ static inline void sci_##name##_out(struct uart_port *port, unsigned int value) \ { \ - if (port->type == PORT_SCI) { \ - SCI_OUT(sci_size, sci_offset, value) \ - } else { \ - SCI_OUT(scif_size, scif_offset, value); \ + if (port->type == PORT_SCIF) { \ + SCI_OUT(scif_size, scif_offset, value) \ + } else { /* PORT_SCI or PORT_SCIFA */ \ + SCI_OUT(sci_size, sci_offset, value); \ } \ } diff --git a/drivers/spi/atmel_spi.c b/drivers/spi/atmel_spi.c index 02f9320f3ef..8abae4ad0fa 100644 --- a/drivers/spi/atmel_spi.c +++ b/drivers/spi/atmel_spi.c @@ -766,6 +766,7 @@ static int __init atmel_spi_probe(struct platform_device *pdev) /* Initialize the hardware */ clk_enable(clk); spi_writel(as, CR, SPI_BIT(SWRST)); + spi_writel(as, CR, SPI_BIT(SWRST)); /* AT91SAM9263 Rev B workaround */ spi_writel(as, MR, SPI_BIT(MSTR) | SPI_BIT(MODFDIS)); spi_writel(as, PTCR, SPI_BIT(RXTDIS) | SPI_BIT(TXTDIS)); spi_writel(as, CR, SPI_BIT(SPIEN)); @@ -782,6 +783,7 @@ static int __init atmel_spi_probe(struct platform_device *pdev) out_reset_hw: spi_writel(as, CR, SPI_BIT(SWRST)); + spi_writel(as, CR, SPI_BIT(SWRST)); /* AT91SAM9263 Rev B workaround */ clk_disable(clk); free_irq(irq, master); out_unmap_regs: @@ -805,6 +807,7 @@ static int __exit atmel_spi_remove(struct platform_device *pdev) spin_lock_irq(&as->lock); as->stopping = 1; spi_writel(as, CR, SPI_BIT(SWRST)); + spi_writel(as, CR, SPI_BIT(SWRST)); /* AT91SAM9263 Rev B workaround */ spi_readl(as, SR); spin_unlock_irq(&as->lock); diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index 20104443081..d50a99f70ae 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -158,16 +158,12 @@ static int acm_wb_is_avail(struct acm *acm) } /* - * Finish write. + * Finish write. Caller must hold acm->write_lock */ static void acm_write_done(struct acm *acm, struct acm_wb *wb) { - unsigned long flags; - - spin_lock_irqsave(&acm->write_lock, flags); wb->use = 0; acm->transmitting--; - spin_unlock_irqrestore(&acm->write_lock, flags); } /* @@ -482,6 +478,7 @@ static void acm_write_bulk(struct urb *urb) { struct acm_wb *wb = urb->context; struct acm *acm = wb->instance; + unsigned long flags; if (verbose || urb->status || (urb->actual_length != urb->transfer_buffer_length)) @@ -490,7 +487,9 @@ static void acm_write_bulk(struct urb *urb) urb->transfer_buffer_length, urb->status); + spin_lock_irqsave(&acm->write_lock, flags); acm_write_done(acm, wb); + spin_unlock_irqrestore(&acm->write_lock, flags); if (ACM_READY(acm)) schedule_work(&acm->work); else diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c index 887738577b2..6d1048faf08 100644 --- a/drivers/usb/core/message.c +++ b/drivers/usb/core/message.c @@ -1091,6 +1091,7 @@ void usb_disable_device(struct usb_device *dev, int skip_ep0) continue; dev_dbg(&dev->dev, "unregistering interface %s\n", dev_name(&interface->dev)); + interface->unregistering = 1; usb_remove_sysfs_intf_files(interface); device_del(&interface->dev); } diff --git a/drivers/usb/core/sysfs.c b/drivers/usb/core/sysfs.c index f66fba11fbd..4fb65fdc9dc 100644 --- a/drivers/usb/core/sysfs.c +++ b/drivers/usb/core/sysfs.c @@ -840,7 +840,7 @@ int usb_create_sysfs_intf_files(struct usb_interface *intf) struct usb_host_interface *alt = intf->cur_altsetting; int retval; - if (intf->sysfs_files_created) + if (intf->sysfs_files_created || intf->unregistering) return 0; /* The interface string may be present in some altsettings diff --git a/drivers/usb/core/urb.c b/drivers/usb/core/urb.c index 4342bd9c3bb..1f68af9db3f 100644 --- a/drivers/usb/core/urb.c +++ b/drivers/usb/core/urb.c @@ -85,8 +85,8 @@ EXPORT_SYMBOL_GPL(usb_alloc_urb); * Must be called when a user of a urb is finished with it. When the last user * of the urb calls this function, the memory of the urb is freed. * - * Note: The transfer buffer associated with the urb is not freed, that must be - * done elsewhere. + * Note: The transfer buffer associated with the urb is not freed unless the + * URB_FREE_BUFFER transfer flag is set. */ void usb_free_urb(struct urb *urb) { diff --git a/drivers/usb/gadget/f_acm.c b/drivers/usb/gadget/f_acm.c index 5ee1590b8e9..c1d34df0b15 100644 --- a/drivers/usb/gadget/f_acm.c +++ b/drivers/usb/gadget/f_acm.c @@ -463,7 +463,11 @@ static int acm_cdc_notify(struct f_acm *acm, u8 type, u16 value, notify->wLength = cpu_to_le16(length); memcpy(buf, data, length); + /* ep_queue() can complete immediately if it fills the fifo... */ + spin_unlock(&acm->lock); status = usb_ep_queue(ep, req, GFP_ATOMIC); + spin_lock(&acm->lock); + if (status < 0) { ERROR(acm->port.func.config->cdev, "acm ttyGS%d can't notify serial state, %d\n", diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index 56f592dc0b3..f3a75a929e0 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -110,29 +110,18 @@ config USB_ISP116X_HCD config USB_ISP1760_HCD tristate "ISP 1760 HCD support" - depends on USB && EXPERIMENTAL + depends on USB && EXPERIMENTAL && (PCI || PPC_OF) ---help--- The ISP1760 chip is a USB 2.0 host controller. This driver does not support isochronous transfers or OTG. + This USB controller is usually attached to a non-DMA-Master + capable bus. NXP's eval kit brings this chip on PCI card + where the chip itself is behind a PLB to simulate such + a bus. To compile this driver as a module, choose M here: the - module will be called isp1760-hcd. - -config USB_ISP1760_PCI - bool "Support for the PCI bus" - depends on USB_ISP1760_HCD && PCI - ---help--- - Enables support for the device present on the PCI bus. - This should only be required if you happen to have the eval kit from - NXP and you are going to test it. - -config USB_ISP1760_OF - bool "Support for the OF platform bus" - depends on USB_ISP1760_HCD && PPC_OF - ---help--- - Enables support for the device present on the PowerPC - OpenFirmware platform bus. + module will be called isp1760. config USB_OHCI_HCD tristate "OHCI HCD support" diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index 15a803b206b..4725d15d096 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -643,7 +643,7 @@ static int ehci_run (struct usb_hcd *hcd) static irqreturn_t ehci_irq (struct usb_hcd *hcd) { struct ehci_hcd *ehci = hcd_to_ehci (hcd); - u32 status, pcd_status = 0, cmd; + u32 status, masked_status, pcd_status = 0, cmd; int bh; spin_lock (&ehci->lock); @@ -656,14 +656,14 @@ static irqreturn_t ehci_irq (struct usb_hcd *hcd) goto dead; } - status &= INTR_MASK; - if (!status) { /* irq sharing? */ + masked_status = status & INTR_MASK; + if (!masked_status) { /* irq sharing? */ spin_unlock(&ehci->lock); return IRQ_NONE; } /* clear (just) interrupts */ - ehci_writel(ehci, status, &ehci->regs->status); + ehci_writel(ehci, masked_status, &ehci->regs->status); cmd = ehci_readl(ehci, &ehci->regs->command); bh = 0; @@ -734,18 +734,17 @@ static irqreturn_t ehci_irq (struct usb_hcd *hcd) /* PCI errors [4.15.2.4] */ if (unlikely ((status & STS_FATAL) != 0)) { + ehci_err(ehci, "fatal error\n"); dbg_cmd(ehci, "fatal", cmd); dbg_status(ehci, "fatal", status); - if (status & STS_HALT) { - ehci_err (ehci, "fatal error\n"); + ehci_halt(ehci); dead: - ehci_reset (ehci); - ehci_writel(ehci, 0, &ehci->regs->configured_flag); - /* generic layer kills/unlinks all urbs, then - * uses ehci_stop to clean up the rest - */ - bh = 1; - } + ehci_reset(ehci); + ehci_writel(ehci, 0, &ehci->regs->configured_flag); + /* generic layer kills/unlinks all urbs, then + * uses ehci_stop to clean up the rest + */ + bh = 1; } if (bh) diff --git a/drivers/usb/host/ehci-ps3.c b/drivers/usb/host/ehci-ps3.c index 0eba894bcb0..9c9da35abc6 100644 --- a/drivers/usb/host/ehci-ps3.c +++ b/drivers/usb/host/ehci-ps3.c @@ -205,6 +205,7 @@ static int ps3_ehci_remove(struct ps3_system_bus_device *dev) tmp = hcd->irq; + ehci_shutdown(hcd); usb_remove_hcd(hcd); ps3_system_bus_set_driver_data(dev, NULL); diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c index 4a0c5a78b2e..a081ee65bde 100644 --- a/drivers/usb/host/ehci-sched.c +++ b/drivers/usb/host/ehci-sched.c @@ -918,7 +918,7 @@ iso_stream_init ( */ stream->usecs = HS_USECS_ISO (maxp); bandwidth = stream->usecs * 8; - bandwidth /= 1 << (interval - 1); + bandwidth /= interval; } else { u32 addr; @@ -951,7 +951,7 @@ iso_stream_init ( } else stream->raw_mask = smask_out [hs_transfers - 1]; bandwidth = stream->usecs + stream->c_usecs; - bandwidth /= 1 << (interval + 2); + bandwidth /= interval << 3; /* stream->splits gets created from raw_mask later */ stream->address = cpu_to_hc32(ehci, addr); diff --git a/drivers/usb/host/isp1760-if.c b/drivers/usb/host/isp1760-if.c index af849f59613..b87ca7cf4b3 100644 --- a/drivers/usb/host/isp1760-if.c +++ b/drivers/usb/host/isp1760-if.c @@ -14,16 +14,16 @@ #include "../core/hcd.h" #include "isp1760-hcd.h" -#ifdef CONFIG_USB_ISP1760_OF +#ifdef CONFIG_PPC_OF #include <linux/of.h> #include <linux/of_platform.h> #endif -#ifdef CONFIG_USB_ISP1760_PCI +#ifdef CONFIG_PCI #include <linux/pci.h> #endif -#ifdef CONFIG_USB_ISP1760_OF +#ifdef CONFIG_PPC_OF static int of_isp1760_probe(struct of_device *dev, const struct of_device_id *match) { @@ -128,7 +128,7 @@ static struct of_platform_driver isp1760_of_driver = { }; #endif -#ifdef CONFIG_USB_ISP1760_PCI +#ifdef CONFIG_PCI static u32 nxp_pci_io_base; static u32 iolength; static u32 pci_mem_phy0; @@ -288,28 +288,28 @@ static struct pci_driver isp1761_pci_driver = { static int __init isp1760_init(void) { - int ret = -ENODEV; + int ret; init_kmem_once(); -#ifdef CONFIG_USB_ISP1760_OF +#ifdef CONFIG_PPC_OF ret = of_register_platform_driver(&isp1760_of_driver); if (ret) { deinit_kmem_cache(); return ret; } #endif -#ifdef CONFIG_USB_ISP1760_PCI +#ifdef CONFIG_PCI ret = pci_register_driver(&isp1761_pci_driver); if (ret) goto unreg_of; #endif return ret; -#ifdef CONFIG_USB_ISP1760_PCI +#ifdef CONFIG_PCI unreg_of: #endif -#ifdef CONFIG_USB_ISP1760_OF +#ifdef CONFIG_PPC_OF of_unregister_platform_driver(&isp1760_of_driver); #endif deinit_kmem_cache(); @@ -319,10 +319,10 @@ module_init(isp1760_init); static void __exit isp1760_exit(void) { -#ifdef CONFIG_USB_ISP1760_OF +#ifdef CONFIG_PPC_OF of_unregister_platform_driver(&isp1760_of_driver); #endif -#ifdef CONFIG_USB_ISP1760_PCI +#ifdef CONFIG_PCI pci_unregister_driver(&isp1761_pci_driver); #endif deinit_kmem_cache(); diff --git a/drivers/usb/host/ohci-ps3.c b/drivers/usb/host/ohci-ps3.c index 2089d8a46c4..3c1a3b5f89f 100644 --- a/drivers/usb/host/ohci-ps3.c +++ b/drivers/usb/host/ohci-ps3.c @@ -192,7 +192,7 @@ fail_start: return result; } -static int ps3_ohci_remove (struct ps3_system_bus_device *dev) +static int ps3_ohci_remove(struct ps3_system_bus_device *dev) { unsigned int tmp; struct usb_hcd *hcd = @@ -205,6 +205,7 @@ static int ps3_ohci_remove (struct ps3_system_bus_device *dev) tmp = hcd->irq; + ohci_shutdown(hcd); usb_remove_hcd(hcd); ps3_system_bus_set_driver_data(dev, NULL); diff --git a/drivers/usb/host/r8a66597-hcd.c b/drivers/usb/host/r8a66597-hcd.c index c18d8790c41..2376f24f3c8 100644 --- a/drivers/usb/host/r8a66597-hcd.c +++ b/drivers/usb/host/r8a66597-hcd.c @@ -1763,11 +1763,12 @@ static void r8a66597_timer(unsigned long _r8a66597) { struct r8a66597 *r8a66597 = (struct r8a66597 *)_r8a66597; unsigned long flags; + int port; spin_lock_irqsave(&r8a66597->lock, flags); - r8a66597_root_hub_control(r8a66597, 0); - r8a66597_root_hub_control(r8a66597, 1); + for (port = 0; port < R8A66597_MAX_ROOT_HUB; port++) + r8a66597_root_hub_control(r8a66597, port); spin_unlock_irqrestore(&r8a66597->lock, flags); } diff --git a/drivers/usb/misc/sisusbvga/sisusb.c b/drivers/usb/misc/sisusbvga/sisusb.c index 69c34a58e20..b4ec716de7d 100644 --- a/drivers/usb/misc/sisusbvga/sisusb.c +++ b/drivers/usb/misc/sisusbvga/sisusb.c @@ -3270,6 +3270,7 @@ static struct usb_device_id sisusb_table [] = { { USB_DEVICE(0x0711, 0x0900) }, { USB_DEVICE(0x0711, 0x0901) }, { USB_DEVICE(0x0711, 0x0902) }, + { USB_DEVICE(0x0711, 0x0903) }, { USB_DEVICE(0x0711, 0x0918) }, { USB_DEVICE(0x182d, 0x021c) }, { USB_DEVICE(0x182d, 0x0269) }, diff --git a/drivers/usb/misc/vstusb.c b/drivers/usb/misc/vstusb.c index 8648470c81c..63dff9ba73c 100644 --- a/drivers/usb/misc/vstusb.c +++ b/drivers/usb/misc/vstusb.c @@ -620,7 +620,7 @@ static long vstusb_ioctl(struct file *file, unsigned int cmd, unsigned long arg) __func__); retval = -EFAULT; } else { - dev_dbg(&dev->dev, "%s: recv %d bytes from pipe %d\n", + dev_dbg(&dev->dev, "%s: recv %zd bytes from pipe %d\n", __func__, usb_data.count, usb_data.pipe); } diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index 4a35745b30b..5280dba9b1f 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -114,8 +114,8 @@ -unsigned debug; -module_param(debug, uint, S_IRUGO | S_IWUSR); +unsigned musb_debug; +module_param(musb_debug, uint, S_IRUGO | S_IWUSR); MODULE_PARM_DESC(debug, "Debug message level. Default = 0"); #define DRIVER_AUTHOR "Mentor Graphics, Texas Instruments, Nokia" @@ -2248,7 +2248,7 @@ static int __init musb_init(void) "host" #endif ", debug=%d\n", - musb_driver_name, debug); + musb_driver_name, musb_debug); return platform_driver_probe(&musb_driver, musb_probe); } diff --git a/drivers/usb/musb/musb_debug.h b/drivers/usb/musb/musb_debug.h index 4d2794441b1..9fc1db44c72 100644 --- a/drivers/usb/musb/musb_debug.h +++ b/drivers/usb/musb/musb_debug.h @@ -48,11 +48,11 @@ __func__, __LINE__ , ## args); \ } } while (0) -extern unsigned debug; +extern unsigned musb_debug; static inline int _dbg_level(unsigned l) { - return debug >= l; + return musb_debug >= l; } #define DBG(level, fmt, args...) xprintk(level, KERN_DEBUG, fmt, ## args) diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c index 3133990f04e..e45e70bcc5e 100644 --- a/drivers/usb/musb/musb_host.c +++ b/drivers/usb/musb/musb_host.c @@ -378,6 +378,19 @@ musb_giveback(struct musb_qh *qh, struct urb *urb, int status) switch (qh->type) { + case USB_ENDPOINT_XFER_CONTROL: + case USB_ENDPOINT_XFER_BULK: + /* fifo policy for these lists, except that NAKing + * should rotate a qh to the end (for fairness). + */ + if (qh->mux == 1) { + head = qh->ring.prev; + list_del(&qh->ring); + kfree(qh); + qh = first_qh(head); + break; + } + case USB_ENDPOINT_XFER_ISOC: case USB_ENDPOINT_XFER_INT: /* this is where periodic bandwidth should be @@ -388,17 +401,6 @@ musb_giveback(struct musb_qh *qh, struct urb *urb, int status) kfree(qh); qh = NULL; break; - - case USB_ENDPOINT_XFER_CONTROL: - case USB_ENDPOINT_XFER_BULK: - /* fifo policy for these lists, except that NAKing - * should rotate a qh to the end (for fairness). - */ - head = qh->ring.prev; - list_del(&qh->ring); - kfree(qh); - qh = first_qh(head); - break; } } return qh; @@ -1507,10 +1509,29 @@ void musb_host_rx(struct musb *musb, u8 epnum) musb_writew(hw_ep->regs, MUSB_RXCSR, val); #ifdef CONFIG_USB_INVENTRA_DMA + if (usb_pipeisoc(pipe)) { + struct usb_iso_packet_descriptor *d; + + d = urb->iso_frame_desc + qh->iso_idx; + d->actual_length = xfer_len; + + /* even if there was an error, we did the dma + * for iso_frame_desc->length + */ + if (d->status != EILSEQ && d->status != -EOVERFLOW) + d->status = 0; + + if (++qh->iso_idx >= urb->number_of_packets) + done = true; + else + done = false; + + } else { /* done if urb buffer is full or short packet is recd */ done = (urb->actual_length + xfer_len >= urb->transfer_buffer_length || dma->actual_len < qh->maxpacket); + } /* send IN token for next packet, without AUTOREQ */ if (!done) { @@ -1547,7 +1568,8 @@ void musb_host_rx(struct musb *musb, u8 epnum) if (dma) { struct dma_controller *c; u16 rx_count; - int ret; + int ret, length; + dma_addr_t buf; rx_count = musb_readw(epio, MUSB_RXCOUNT); @@ -1560,6 +1582,35 @@ void musb_host_rx(struct musb *musb, u8 epnum) c = musb->dma_controller; + if (usb_pipeisoc(pipe)) { + int status = 0; + struct usb_iso_packet_descriptor *d; + + d = urb->iso_frame_desc + qh->iso_idx; + + if (iso_err) { + status = -EILSEQ; + urb->error_count++; + } + if (rx_count > d->length) { + if (status == 0) { + status = -EOVERFLOW; + urb->error_count++; + } + DBG(2, "** OVERFLOW %d into %d\n",\ + rx_count, d->length); + + length = d->length; + } else + length = rx_count; + d->status = status; + buf = urb->transfer_dma + d->offset; + } else { + length = rx_count; + buf = urb->transfer_dma + + urb->actual_length; + } + dma->desired_mode = 0; #ifdef USE_MODE1 /* because of the issue below, mode 1 will @@ -1571,6 +1622,12 @@ void musb_host_rx(struct musb *musb, u8 epnum) urb->actual_length) > qh->maxpacket) dma->desired_mode = 1; + if (rx_count < hw_ep->max_packet_sz_rx) { + length = rx_count; + dma->bDesiredMode = 0; + } else { + length = urb->transfer_buffer_length; + } #endif /* Disadvantage of using mode 1: @@ -1608,12 +1665,7 @@ void musb_host_rx(struct musb *musb, u8 epnum) */ ret = c->channel_program( dma, qh->maxpacket, - dma->desired_mode, - urb->transfer_dma - + urb->actual_length, - (dma->desired_mode == 0) - ? rx_count - : urb->transfer_buffer_length); + dma->desired_mode, buf, length); if (!ret) { c->channel_release(dma); @@ -1631,19 +1683,6 @@ void musb_host_rx(struct musb *musb, u8 epnum) } } - if (dma && usb_pipeisoc(pipe)) { - struct usb_iso_packet_descriptor *d; - int iso_stat = status; - - d = urb->iso_frame_desc + qh->iso_idx; - d->actual_length += xfer_len; - if (iso_err) { - iso_stat = -EILSEQ; - urb->error_count++; - } - d->status = iso_stat; - } - finish: urb->actual_length += xfer_len; qh->offset += xfer_len; @@ -1671,22 +1710,9 @@ static int musb_schedule( struct list_head *head = NULL; /* use fixed hardware for control and bulk */ - switch (qh->type) { - case USB_ENDPOINT_XFER_CONTROL: + if (qh->type == USB_ENDPOINT_XFER_CONTROL) { head = &musb->control; hw_ep = musb->control_ep; - break; - case USB_ENDPOINT_XFER_BULK: - hw_ep = musb->bulk_ep; - if (is_in) - head = &musb->in_bulk; - else - head = &musb->out_bulk; - break; - } - if (head) { - idle = list_empty(head); - list_add_tail(&qh->ring, head); goto success; } @@ -1725,19 +1751,34 @@ static int musb_schedule( else diff = hw_ep->max_packet_sz_tx - qh->maxpacket; - if (diff > 0 && best_diff > diff) { + if (diff >= 0 && best_diff > diff) { best_diff = diff; best_end = epnum; } } - if (best_end < 0) + /* use bulk reserved ep1 if no other ep is free */ + if (best_end > 0 && qh->type == USB_ENDPOINT_XFER_BULK) { + hw_ep = musb->bulk_ep; + if (is_in) + head = &musb->in_bulk; + else + head = &musb->out_bulk; + goto success; + } else if (best_end < 0) { return -ENOSPC; + } idle = 1; + qh->mux = 0; hw_ep = musb->endpoints + best_end; musb->periodic[best_end] = qh; DBG(4, "qh %p periodic slot %d\n", qh, best_end); success: + if (head) { + idle = list_empty(head); + list_add_tail(&qh->ring, head); + qh->mux = 1; + } qh->hw_ep = hw_ep; qh->hep->hcpriv = qh; if (idle) @@ -2015,11 +2056,13 @@ static int musb_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status) sched = &musb->control; break; case USB_ENDPOINT_XFER_BULK: - if (usb_pipein(urb->pipe)) - sched = &musb->in_bulk; - else - sched = &musb->out_bulk; - break; + if (qh->mux == 1) { + if (usb_pipein(urb->pipe)) + sched = &musb->in_bulk; + else + sched = &musb->out_bulk; + break; + } default: /* REVISIT when we get a schedule tree, periodic * transfers won't always be at the head of a @@ -2067,11 +2110,13 @@ musb_h_disable(struct usb_hcd *hcd, struct usb_host_endpoint *hep) sched = &musb->control; break; case USB_ENDPOINT_XFER_BULK: - if (is_in) - sched = &musb->in_bulk; - else - sched = &musb->out_bulk; - break; + if (qh->mux == 1) { + if (is_in) + sched = &musb->in_bulk; + else + sched = &musb->out_bulk; + break; + } default: /* REVISIT when we get a schedule tree, periodic transfers * won't always be at the head of a singleton queue... diff --git a/drivers/usb/musb/musb_host.h b/drivers/usb/musb/musb_host.h index 77bcdb9d5b3..0b7fbcd2196 100644 --- a/drivers/usb/musb/musb_host.h +++ b/drivers/usb/musb/musb_host.h @@ -53,6 +53,7 @@ struct musb_qh { struct list_head ring; /* of musb_qh */ /* struct musb_qh *next; */ /* for periodic tree */ + u8 mux; /* qh multiplexed to hw_ep */ unsigned offset; /* in urb->transfer_buffer */ unsigned segsize; /* current xfer fragment */ diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c index 9d2dcb121c5..ce6c162920f 100644 --- a/drivers/usb/musb/omap2430.c +++ b/drivers/usb/musb/omap2430.c @@ -53,7 +53,9 @@ static void musb_do_idle(unsigned long _musb) { struct musb *musb = (void *)_musb; unsigned long flags; +#ifdef CONFIG_USB_MUSB_HDRC_HCD u8 power; +#endif u8 devctl; devctl = musb_readb(musb->mregs, MUSB_DEVCTL); diff --git a/drivers/usb/musb/tusb6010.c b/drivers/usb/musb/tusb6010.c index b73b036f3d7..ee8fca92a4a 100644 --- a/drivers/usb/musb/tusb6010.c +++ b/drivers/usb/musb/tusb6010.c @@ -605,7 +605,7 @@ void musb_platform_set_mode(struct musb *musb, u8 musb_mode) if (musb->board_mode != MUSB_OTG) { ERR("Changing mode currently only supported in OTG mode\n"); - return; + return -EINVAL; } otg_stat = musb_readl(tbase, TUSB_DEV_OTG_STAT); diff --git a/drivers/usb/serial/cp2101.c b/drivers/usb/serial/cp2101.c index 8008d0bc80a..9035d7256b0 100644 --- a/drivers/usb/serial/cp2101.c +++ b/drivers/usb/serial/cp2101.c @@ -67,6 +67,7 @@ static struct usb_device_id id_table [] = { { USB_DEVICE(0x10C4, 0x800A) }, /* SPORTident BSM7-D-USB main station */ { USB_DEVICE(0x10C4, 0x803B) }, /* Pololu USB-serial converter */ { USB_DEVICE(0x10C4, 0x8053) }, /* Enfora EDG1228 */ + { USB_DEVICE(0x10C4, 0x8054) }, /* Enfora GSM2228 */ { USB_DEVICE(0x10C4, 0x8066) }, /* Argussoft In-System Programmer */ { USB_DEVICE(0x10C4, 0x807A) }, /* Crumb128 board */ { USB_DEVICE(0x10C4, 0x80CA) }, /* Degree Controls Inc */ @@ -85,6 +86,7 @@ static struct usb_device_id id_table [] = { { USB_DEVICE(0x10C4, 0x8218) }, /* Lipowsky Industrie Elektronik GmbH, HARP-1 */ { USB_DEVICE(0x10c4, 0x8293) }, /* Telegesys ETRX2USB */ { USB_DEVICE(0x10C4, 0x8341) }, /* Siemens MC35PU GPRS Modem */ + { USB_DEVICE(0x10C4, 0x83A8) }, /* Amber Wireless AMB2560 */ { USB_DEVICE(0x10C4, 0xEA60) }, /* Silicon Labs factory default */ { USB_DEVICE(0x10C4, 0xEA61) }, /* Silicon Labs factory default */ { USB_DEVICE(0x10C4, 0xF001) }, /* Elan Digital Systems USBscope50 */ diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index bd07eaa300b..6fa1ec441b6 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -160,6 +160,11 @@ static int option_send_setup(struct tty_struct *tty, struct usb_serial_port *po #define NOVATELWIRELESS_VENDOR_ID 0x1410 +/* YISO PRODUCTS */ + +#define YISO_VENDOR_ID 0x0EAB +#define YISO_PRODUCT_U893 0xC893 + /* MERLIN EVDO PRODUCTS */ #define NOVATELWIRELESS_PRODUCT_V640 0x1100 #define NOVATELWIRELESS_PRODUCT_V620 0x1110 @@ -408,6 +413,7 @@ static struct usb_device_id option_ids[] = { { USB_DEVICE(AXESSTEL_VENDOR_ID, AXESSTEL_PRODUCT_MV110H) }, { USB_DEVICE(ONDA_VENDOR_ID, ONDA_PRODUCT_MSA501HS) }, { USB_DEVICE(ONDA_VENDOR_ID, ONDA_PRODUCT_ET502HS) }, + { USB_DEVICE(YISO_VENDOR_ID, YISO_PRODUCT_U893) }, { USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_C100_1) }, { USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_C100_2) }, { USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_1004) }, diff --git a/drivers/usb/storage/Kconfig b/drivers/usb/storage/Kconfig index 3d9249632ae..c68b738900b 100644 --- a/drivers/usb/storage/Kconfig +++ b/drivers/usb/storage/Kconfig @@ -2,8 +2,8 @@ # USB Storage driver configuration # -comment "NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'" -comment "may also be needed; see USB_STORAGE Help for more information" +comment "NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;" +comment "see USB_STORAGE Help for more information" depends on USB config USB_STORAGE diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index fb9e20e624c..d4e5fc86e43 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -253,6 +253,14 @@ UNUSUAL_DEV( 0x0421, 0x006a, 0x0000, 0x0591, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_CAPACITY ), +/* Submitted by Ricky Wong Yung Fei <evilbladewarrior@gmail.com> */ +/* Nokia 7610 Supernova - Too many sectors reported in usb storage mode */ +UNUSUAL_DEV( 0x0421, 0x00f5, 0x0000, 0x0470, + "Nokia", + "7610 Supernova", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_FIX_CAPACITY ), + /* Reported by Olaf Hering <olh@suse.de> from novell bug #105878 */ UNUSUAL_DEV( 0x0424, 0x0fdc, 0x0210, 0x0210, "SMSC", @@ -418,6 +426,13 @@ UNUSUAL_DEV( 0x04b0, 0x0417, 0x0100, 0x0100, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_CAPACITY), +/* Reported by paul ready <lxtwin@homecall.co.uk> */ +UNUSUAL_DEV( 0x04b0, 0x0419, 0x0100, 0x0200, + "NIKON", + "NIKON DSC D300", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_FIX_CAPACITY), + /* Reported by Doug Maxey (dwm@austin.ibm.com) */ UNUSUAL_DEV( 0x04b3, 0x4001, 0x0110, 0x0110, "IBM", @@ -1258,6 +1273,13 @@ UNUSUAL_DEV( 0x0839, 0x000a, 0x0001, 0x0001, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_INQUIRY), +/* Reported by Luciano Rocha <luciano@eurotux.com> */ +UNUSUAL_DEV( 0x0840, 0x0082, 0x0001, 0x0001, + "Argosy", + "Storage", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_FIX_CAPACITY), + /* Entry and supporting patch by Theodore Kilgore <kilgota@auburn.edu>. * Flag will support Bulk devices which use a standards-violating 32-byte * Command Block Wrapper. Here, the "DC2MEGA" cameras (several brands) with diff --git a/drivers/w1/masters/Kconfig b/drivers/w1/masters/Kconfig index c4493091c65..a14d5b6e4c7 100644 --- a/drivers/w1/masters/Kconfig +++ b/drivers/w1/masters/Kconfig @@ -52,5 +52,12 @@ config W1_MASTER_GPIO This support is also available as a module. If so, the module will be called w1-gpio.ko. +config HDQ_MASTER_OMAP + tristate "OMAP HDQ driver" + depends on ARCH_OMAP2430 || ARCH_OMAP34XX + help + Say Y here if you want support for the 1-wire or HDQ Interface + on an OMAP processor. + endmenu diff --git a/drivers/w1/masters/Makefile b/drivers/w1/masters/Makefile index 1420b5bbdda..bc4714a75f3 100644 --- a/drivers/w1/masters/Makefile +++ b/drivers/w1/masters/Makefile @@ -7,3 +7,4 @@ obj-$(CONFIG_W1_MASTER_DS2490) += ds2490.o obj-$(CONFIG_W1_MASTER_DS2482) += ds2482.o obj-$(CONFIG_W1_MASTER_DS1WM) += ds1wm.o obj-$(CONFIG_W1_MASTER_GPIO) += w1-gpio.o +obj-$(CONFIG_HDQ_MASTER_OMAP) += omap_hdq.o diff --git a/drivers/w1/masters/omap_hdq.c b/drivers/w1/masters/omap_hdq.c new file mode 100644 index 00000000000..1295625c482 --- /dev/null +++ b/drivers/w1/masters/omap_hdq.c @@ -0,0 +1,725 @@ +/* + * drivers/w1/masters/omap_hdq.c + * + * Copyright (C) 2007 Texas Instruments, Inc. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + * + */ +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/interrupt.h> +#include <linux/err.h> +#include <linux/clk.h> +#include <linux/io.h> + +#include <asm/irq.h> +#include <mach/hardware.h> + +#include "../w1.h" +#include "../w1_int.h" + +#define MOD_NAME "OMAP_HDQ:" + +#define OMAP_HDQ_REVISION 0x00 +#define OMAP_HDQ_TX_DATA 0x04 +#define OMAP_HDQ_RX_DATA 0x08 +#define OMAP_HDQ_CTRL_STATUS 0x0c +#define OMAP_HDQ_CTRL_STATUS_INTERRUPTMASK (1<<6) +#define OMAP_HDQ_CTRL_STATUS_CLOCKENABLE (1<<5) +#define OMAP_HDQ_CTRL_STATUS_GO (1<<4) +#define OMAP_HDQ_CTRL_STATUS_INITIALIZATION (1<<2) +#define OMAP_HDQ_CTRL_STATUS_DIR (1<<1) +#define OMAP_HDQ_CTRL_STATUS_MODE (1<<0) +#define OMAP_HDQ_INT_STATUS 0x10 +#define OMAP_HDQ_INT_STATUS_TXCOMPLETE (1<<2) +#define OMAP_HDQ_INT_STATUS_RXCOMPLETE (1<<1) +#define OMAP_HDQ_INT_STATUS_TIMEOUT (1<<0) +#define OMAP_HDQ_SYSCONFIG 0x14 +#define OMAP_HDQ_SYSCONFIG_SOFTRESET (1<<1) +#define OMAP_HDQ_SYSCONFIG_AUTOIDLE (1<<0) +#define OMAP_HDQ_SYSSTATUS 0x18 +#define OMAP_HDQ_SYSSTATUS_RESETDONE (1<<0) + +#define OMAP_HDQ_FLAG_CLEAR 0 +#define OMAP_HDQ_FLAG_SET 1 +#define OMAP_HDQ_TIMEOUT (HZ/5) + +#define OMAP_HDQ_MAX_USER 4 + +static DECLARE_WAIT_QUEUE_HEAD(hdq_wait_queue); +static int w1_id; + +struct hdq_data { + struct device *dev; + void __iomem *hdq_base; + /* lock status update */ + struct mutex hdq_mutex; + int hdq_usecount; + struct clk *hdq_ick; + struct clk *hdq_fck; + u8 hdq_irqstatus; + /* device lock */ + spinlock_t hdq_spinlock; + /* + * Used to control the call to omap_hdq_get and omap_hdq_put. + * HDQ Protocol: Write the CMD|REG_address first, followed by + * the data wrire or read. + */ + int init_trans; +}; + +static int __init omap_hdq_probe(struct platform_device *pdev); +static int omap_hdq_remove(struct platform_device *pdev); + +static struct platform_driver omap_hdq_driver = { + .probe = omap_hdq_probe, + .remove = omap_hdq_remove, + .driver = { + .name = "omap_hdq", + }, +}; + +static u8 omap_w1_read_byte(void *_hdq); +static void omap_w1_write_byte(void *_hdq, u8 byte); +static u8 omap_w1_reset_bus(void *_hdq); +static void omap_w1_search_bus(void *_hdq, u8 search_type, + w1_slave_found_callback slave_found); + + +static struct w1_bus_master omap_w1_master = { + .read_byte = omap_w1_read_byte, + .write_byte = omap_w1_write_byte, + .reset_bus = omap_w1_reset_bus, + .search = omap_w1_search_bus, +}; + +/* HDQ register I/O routines */ +static inline u8 hdq_reg_in(struct hdq_data *hdq_data, u32 offset) +{ + return __raw_readb(hdq_data->hdq_base + offset); +} + +static inline void hdq_reg_out(struct hdq_data *hdq_data, u32 offset, u8 val) +{ + __raw_writeb(val, hdq_data->hdq_base + offset); +} + +static inline u8 hdq_reg_merge(struct hdq_data *hdq_data, u32 offset, + u8 val, u8 mask) +{ + u8 new_val = (__raw_readb(hdq_data->hdq_base + offset) & ~mask) + | (val & mask); + __raw_writeb(new_val, hdq_data->hdq_base + offset); + + return new_val; +} + +/* + * Wait for one or more bits in flag change. + * HDQ_FLAG_SET: wait until any bit in the flag is set. + * HDQ_FLAG_CLEAR: wait until all bits in the flag are cleared. + * return 0 on success and -ETIMEDOUT in the case of timeout. + */ +static int hdq_wait_for_flag(struct hdq_data *hdq_data, u32 offset, + u8 flag, u8 flag_set, u8 *status) +{ + int ret = 0; + unsigned long timeout = jiffies + OMAP_HDQ_TIMEOUT; + + if (flag_set == OMAP_HDQ_FLAG_CLEAR) { + /* wait for the flag clear */ + while (((*status = hdq_reg_in(hdq_data, offset)) & flag) + && time_before(jiffies, timeout)) { + schedule_timeout_uninterruptible(1); + } + if (*status & flag) + ret = -ETIMEDOUT; + } else if (flag_set == OMAP_HDQ_FLAG_SET) { + /* wait for the flag set */ + while (!((*status = hdq_reg_in(hdq_data, offset)) & flag) + && time_before(jiffies, timeout)) { + schedule_timeout_uninterruptible(1); + } + if (!(*status & flag)) + ret = -ETIMEDOUT; + } else + return -EINVAL; + + return ret; +} + +/* write out a byte and fill *status with HDQ_INT_STATUS */ +static int hdq_write_byte(struct hdq_data *hdq_data, u8 val, u8 *status) +{ + int ret; + u8 tmp_status; + unsigned long irqflags; + + *status = 0; + + spin_lock_irqsave(&hdq_data->hdq_spinlock, irqflags); + /* clear interrupt flags via a dummy read */ + hdq_reg_in(hdq_data, OMAP_HDQ_INT_STATUS); + /* ISR loads it with new INT_STATUS */ + hdq_data->hdq_irqstatus = 0; + spin_unlock_irqrestore(&hdq_data->hdq_spinlock, irqflags); + + hdq_reg_out(hdq_data, OMAP_HDQ_TX_DATA, val); + + /* set the GO bit */ + hdq_reg_merge(hdq_data, OMAP_HDQ_CTRL_STATUS, OMAP_HDQ_CTRL_STATUS_GO, + OMAP_HDQ_CTRL_STATUS_DIR | OMAP_HDQ_CTRL_STATUS_GO); + /* wait for the TXCOMPLETE bit */ + ret = wait_event_timeout(hdq_wait_queue, + hdq_data->hdq_irqstatus, OMAP_HDQ_TIMEOUT); + if (ret == 0) { + dev_dbg(hdq_data->dev, "TX wait elapsed\n"); + goto out; + } + + *status = hdq_data->hdq_irqstatus; + /* check irqstatus */ + if (!(*status & OMAP_HDQ_INT_STATUS_TXCOMPLETE)) { + dev_dbg(hdq_data->dev, "timeout waiting for" + "TXCOMPLETE/RXCOMPLETE, %x", *status); + ret = -ETIMEDOUT; + goto out; + } + + /* wait for the GO bit return to zero */ + ret = hdq_wait_for_flag(hdq_data, OMAP_HDQ_CTRL_STATUS, + OMAP_HDQ_CTRL_STATUS_GO, + OMAP_HDQ_FLAG_CLEAR, &tmp_status); + if (ret) { + dev_dbg(hdq_data->dev, "timeout waiting GO bit" + "return to zero, %x", tmp_status); + } + +out: + return ret; +} + +/* HDQ Interrupt service routine */ +static irqreturn_t hdq_isr(int irq, void *_hdq) +{ + struct hdq_data *hdq_data = _hdq; + unsigned long irqflags; + + spin_lock_irqsave(&hdq_data->hdq_spinlock, irqflags); + hdq_data->hdq_irqstatus = hdq_reg_in(hdq_data, OMAP_HDQ_INT_STATUS); + spin_unlock_irqrestore(&hdq_data->hdq_spinlock, irqflags); + dev_dbg(hdq_data->dev, "hdq_isr: %x", hdq_data->hdq_irqstatus); + + if (hdq_data->hdq_irqstatus & + (OMAP_HDQ_INT_STATUS_TXCOMPLETE | OMAP_HDQ_INT_STATUS_RXCOMPLETE + | OMAP_HDQ_INT_STATUS_TIMEOUT)) { + /* wake up sleeping process */ + wake_up(&hdq_wait_queue); + } + + return IRQ_HANDLED; +} + +/* HDQ Mode: always return success */ +static u8 omap_w1_reset_bus(void *_hdq) +{ + return 0; +} + +/* W1 search callback function */ +static void omap_w1_search_bus(void *_hdq, u8 search_type, + w1_slave_found_callback slave_found) +{ + u64 module_id, rn_le, cs, id; + + if (w1_id) + module_id = w1_id; + else + module_id = 0x1; + + rn_le = cpu_to_le64(module_id); + /* + * HDQ might not obey truly the 1-wire spec. + * So calculate CRC based on module parameter. + */ + cs = w1_calc_crc8((u8 *)&rn_le, 7); + id = (cs << 56) | module_id; + + slave_found(_hdq, id); +} + +static int _omap_hdq_reset(struct hdq_data *hdq_data) +{ + int ret; + u8 tmp_status; + + hdq_reg_out(hdq_data, OMAP_HDQ_SYSCONFIG, OMAP_HDQ_SYSCONFIG_SOFTRESET); + /* + * Select HDQ mode & enable clocks. + * It is observed that INT flags can't be cleared via a read and GO/INIT + * won't return to zero if interrupt is disabled. So we always enable + * interrupt. + */ + hdq_reg_out(hdq_data, OMAP_HDQ_CTRL_STATUS, + OMAP_HDQ_CTRL_STATUS_CLOCKENABLE | + OMAP_HDQ_CTRL_STATUS_INTERRUPTMASK); + + /* wait for reset to complete */ + ret = hdq_wait_for_flag(hdq_data, OMAP_HDQ_SYSSTATUS, + OMAP_HDQ_SYSSTATUS_RESETDONE, OMAP_HDQ_FLAG_SET, &tmp_status); + if (ret) + dev_dbg(hdq_data->dev, "timeout waiting HDQ reset, %x", + tmp_status); + else { + hdq_reg_out(hdq_data, OMAP_HDQ_CTRL_STATUS, + OMAP_HDQ_CTRL_STATUS_CLOCKENABLE | + OMAP_HDQ_CTRL_STATUS_INTERRUPTMASK); + hdq_reg_out(hdq_data, OMAP_HDQ_SYSCONFIG, + OMAP_HDQ_SYSCONFIG_AUTOIDLE); + } + + return ret; +} + +/* Issue break pulse to the device */ +static int omap_hdq_break(struct hdq_data *hdq_data) +{ + int ret = 0; + u8 tmp_status; + unsigned long irqflags; + + ret = mutex_lock_interruptible(&hdq_data->hdq_mutex); + if (ret < 0) { + dev_dbg(hdq_data->dev, "Could not acquire mutex\n"); + ret = -EINTR; + goto rtn; + } + + spin_lock_irqsave(&hdq_data->hdq_spinlock, irqflags); + /* clear interrupt flags via a dummy read */ + hdq_reg_in(hdq_data, OMAP_HDQ_INT_STATUS); + /* ISR loads it with new INT_STATUS */ + hdq_data->hdq_irqstatus = 0; + spin_unlock_irqrestore(&hdq_data->hdq_spinlock, irqflags); + + /* set the INIT and GO bit */ + hdq_reg_merge(hdq_data, OMAP_HDQ_CTRL_STATUS, + OMAP_HDQ_CTRL_STATUS_INITIALIZATION | OMAP_HDQ_CTRL_STATUS_GO, + OMAP_HDQ_CTRL_STATUS_DIR | OMAP_HDQ_CTRL_STATUS_INITIALIZATION | + OMAP_HDQ_CTRL_STATUS_GO); + + /* wait for the TIMEOUT bit */ + ret = wait_event_timeout(hdq_wait_queue, + hdq_data->hdq_irqstatus, OMAP_HDQ_TIMEOUT); + if (ret == 0) { + dev_dbg(hdq_data->dev, "break wait elapsed\n"); + ret = -EINTR; + goto out; + } + + tmp_status = hdq_data->hdq_irqstatus; + /* check irqstatus */ + if (!(tmp_status & OMAP_HDQ_INT_STATUS_TIMEOUT)) { + dev_dbg(hdq_data->dev, "timeout waiting for TIMEOUT, %x", + tmp_status); + ret = -ETIMEDOUT; + goto out; + } + /* + * wait for both INIT and GO bits rerurn to zero. + * zero wait time expected for interrupt mode. + */ + ret = hdq_wait_for_flag(hdq_data, OMAP_HDQ_CTRL_STATUS, + OMAP_HDQ_CTRL_STATUS_INITIALIZATION | + OMAP_HDQ_CTRL_STATUS_GO, OMAP_HDQ_FLAG_CLEAR, + &tmp_status); + if (ret) + dev_dbg(hdq_data->dev, "timeout waiting INIT&GO bits" + "return to zero, %x", tmp_status); + +out: + mutex_unlock(&hdq_data->hdq_mutex); +rtn: + return ret; +} + +static int hdq_read_byte(struct hdq_data *hdq_data, u8 *val) +{ + int ret = 0; + u8 status; + unsigned long timeout = jiffies + OMAP_HDQ_TIMEOUT; + + ret = mutex_lock_interruptible(&hdq_data->hdq_mutex); + if (ret < 0) { + ret = -EINTR; + goto rtn; + } + + if (!hdq_data->hdq_usecount) { + ret = -EINVAL; + goto out; + } + + if (!(hdq_data->hdq_irqstatus & OMAP_HDQ_INT_STATUS_RXCOMPLETE)) { + hdq_reg_merge(hdq_data, OMAP_HDQ_CTRL_STATUS, + OMAP_HDQ_CTRL_STATUS_DIR | OMAP_HDQ_CTRL_STATUS_GO, + OMAP_HDQ_CTRL_STATUS_DIR | OMAP_HDQ_CTRL_STATUS_GO); + /* + * The RX comes immediately after TX. It + * triggers another interrupt before we + * sleep. So we have to wait for RXCOMPLETE bit. + */ + while (!(hdq_data->hdq_irqstatus + & OMAP_HDQ_INT_STATUS_RXCOMPLETE) + && time_before(jiffies, timeout)) { + schedule_timeout_uninterruptible(1); + } + hdq_reg_merge(hdq_data, OMAP_HDQ_CTRL_STATUS, 0, + OMAP_HDQ_CTRL_STATUS_DIR); + status = hdq_data->hdq_irqstatus; + /* check irqstatus */ + if (!(status & OMAP_HDQ_INT_STATUS_RXCOMPLETE)) { + dev_dbg(hdq_data->dev, "timeout waiting for" + "RXCOMPLETE, %x", status); + ret = -ETIMEDOUT; + goto out; + } + } + /* the data is ready. Read it in! */ + *val = hdq_reg_in(hdq_data, OMAP_HDQ_RX_DATA); +out: + mutex_unlock(&hdq_data->hdq_mutex); +rtn: + return 0; + +} + +/* Enable clocks and set the controller to HDQ mode */ +static int omap_hdq_get(struct hdq_data *hdq_data) +{ + int ret = 0; + + ret = mutex_lock_interruptible(&hdq_data->hdq_mutex); + if (ret < 0) { + ret = -EINTR; + goto rtn; + } + + if (OMAP_HDQ_MAX_USER == hdq_data->hdq_usecount) { + dev_dbg(hdq_data->dev, "attempt to exceed the max use count"); + ret = -EINVAL; + goto out; + } else { + hdq_data->hdq_usecount++; + try_module_get(THIS_MODULE); + if (1 == hdq_data->hdq_usecount) { + if (clk_enable(hdq_data->hdq_ick)) { + dev_dbg(hdq_data->dev, "Can not enable ick\n"); + ret = -ENODEV; + goto clk_err; + } + if (clk_enable(hdq_data->hdq_fck)) { + dev_dbg(hdq_data->dev, "Can not enable fck\n"); + clk_disable(hdq_data->hdq_ick); + ret = -ENODEV; + goto clk_err; + } + + /* make sure HDQ is out of reset */ + if (!(hdq_reg_in(hdq_data, OMAP_HDQ_SYSSTATUS) & + OMAP_HDQ_SYSSTATUS_RESETDONE)) { + ret = _omap_hdq_reset(hdq_data); + if (ret) + /* back up the count */ + hdq_data->hdq_usecount--; + } else { + /* select HDQ mode & enable clocks */ + hdq_reg_out(hdq_data, OMAP_HDQ_CTRL_STATUS, + OMAP_HDQ_CTRL_STATUS_CLOCKENABLE | + OMAP_HDQ_CTRL_STATUS_INTERRUPTMASK); + hdq_reg_out(hdq_data, OMAP_HDQ_SYSCONFIG, + OMAP_HDQ_SYSCONFIG_AUTOIDLE); + hdq_reg_in(hdq_data, OMAP_HDQ_INT_STATUS); + } + } + } + +clk_err: + clk_put(hdq_data->hdq_ick); + clk_put(hdq_data->hdq_fck); +out: + mutex_unlock(&hdq_data->hdq_mutex); +rtn: + return ret; +} + +/* Disable clocks to the module */ +static int omap_hdq_put(struct hdq_data *hdq_data) +{ + int ret = 0; + + ret = mutex_lock_interruptible(&hdq_data->hdq_mutex); + if (ret < 0) + return -EINTR; + + if (0 == hdq_data->hdq_usecount) { + dev_dbg(hdq_data->dev, "attempt to decrement use count" + "when it is zero"); + ret = -EINVAL; + } else { + hdq_data->hdq_usecount--; + module_put(THIS_MODULE); + if (0 == hdq_data->hdq_usecount) { + clk_disable(hdq_data->hdq_ick); + clk_disable(hdq_data->hdq_fck); + } + } + mutex_unlock(&hdq_data->hdq_mutex); + + return ret; +} + +/* Read a byte of data from the device */ +static u8 omap_w1_read_byte(void *_hdq) +{ + struct hdq_data *hdq_data = _hdq; + u8 val = 0; + int ret; + + ret = hdq_read_byte(hdq_data, &val); + if (ret) { + ret = mutex_lock_interruptible(&hdq_data->hdq_mutex); + if (ret < 0) { + dev_dbg(hdq_data->dev, "Could not acquire mutex\n"); + return -EINTR; + } + hdq_data->init_trans = 0; + mutex_unlock(&hdq_data->hdq_mutex); + omap_hdq_put(hdq_data); + return -1; + } + + /* Write followed by a read, release the module */ + if (hdq_data->init_trans) { + ret = mutex_lock_interruptible(&hdq_data->hdq_mutex); + if (ret < 0) { + dev_dbg(hdq_data->dev, "Could not acquire mutex\n"); + return -EINTR; + } + hdq_data->init_trans = 0; + mutex_unlock(&hdq_data->hdq_mutex); + omap_hdq_put(hdq_data); + } + + return val; +} + +/* Write a byte of data to the device */ +static void omap_w1_write_byte(void *_hdq, u8 byte) +{ + struct hdq_data *hdq_data = _hdq; + int ret; + u8 status; + + /* First write to initialize the transfer */ + if (hdq_data->init_trans == 0) + omap_hdq_get(hdq_data); + + ret = mutex_lock_interruptible(&hdq_data->hdq_mutex); + if (ret < 0) { + dev_dbg(hdq_data->dev, "Could not acquire mutex\n"); + return; + } + hdq_data->init_trans++; + mutex_unlock(&hdq_data->hdq_mutex); + + ret = hdq_write_byte(hdq_data, byte, &status); + if (ret == 0) { + dev_dbg(hdq_data->dev, "TX failure:Ctrl status %x\n", status); + return; + } + + /* Second write, data transfered. Release the module */ + if (hdq_data->init_trans > 1) { + omap_hdq_put(hdq_data); + ret = mutex_lock_interruptible(&hdq_data->hdq_mutex); + if (ret < 0) { + dev_dbg(hdq_data->dev, "Could not acquire mutex\n"); + return; + } + hdq_data->init_trans = 0; + mutex_unlock(&hdq_data->hdq_mutex); + } + + return; +} + +static int __init omap_hdq_probe(struct platform_device *pdev) +{ + struct hdq_data *hdq_data; + struct resource *res; + int ret, irq; + u8 rev; + + hdq_data = kmalloc(sizeof(*hdq_data), GFP_KERNEL); + if (!hdq_data) { + dev_dbg(&pdev->dev, "unable to allocate memory\n"); + ret = -ENOMEM; + goto err_kmalloc; + } + + hdq_data->dev = &pdev->dev; + platform_set_drvdata(pdev, hdq_data); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_dbg(&pdev->dev, "unable to get resource\n"); + ret = -ENXIO; + goto err_resource; + } + + hdq_data->hdq_base = ioremap(res->start, SZ_4K); + if (!hdq_data->hdq_base) { + dev_dbg(&pdev->dev, "ioremap failed\n"); + ret = -EINVAL; + goto err_ioremap; + } + + /* get interface & functional clock objects */ + hdq_data->hdq_ick = clk_get(&pdev->dev, "hdq_ick"); + hdq_data->hdq_fck = clk_get(&pdev->dev, "hdq_fck"); + + if (IS_ERR(hdq_data->hdq_ick) || IS_ERR(hdq_data->hdq_fck)) { + dev_dbg(&pdev->dev, "Can't get HDQ clock objects\n"); + if (IS_ERR(hdq_data->hdq_ick)) { + ret = PTR_ERR(hdq_data->hdq_ick); + goto err_clk; + } + if (IS_ERR(hdq_data->hdq_fck)) { + ret = PTR_ERR(hdq_data->hdq_fck); + clk_put(hdq_data->hdq_ick); + goto err_clk; + } + } + + hdq_data->hdq_usecount = 0; + mutex_init(&hdq_data->hdq_mutex); + + if (clk_enable(hdq_data->hdq_ick)) { + dev_dbg(&pdev->dev, "Can not enable ick\n"); + ret = -ENODEV; + goto err_intfclk; + } + + if (clk_enable(hdq_data->hdq_fck)) { + dev_dbg(&pdev->dev, "Can not enable fck\n"); + ret = -ENODEV; + goto err_fnclk; + } + + rev = hdq_reg_in(hdq_data, OMAP_HDQ_REVISION); + dev_info(&pdev->dev, "OMAP HDQ Hardware Rev %c.%c. Driver in %s mode\n", + (rev >> 4) + '0', (rev & 0x0f) + '0', "Interrupt"); + + spin_lock_init(&hdq_data->hdq_spinlock); + + irq = platform_get_irq(pdev, 0); + if (irq < 0) { + ret = -ENXIO; + goto err_irq; + } + + ret = request_irq(irq, hdq_isr, IRQF_DISABLED, "omap_hdq", hdq_data); + if (ret < 0) { + dev_dbg(&pdev->dev, "could not request irq\n"); + goto err_irq; + } + + omap_hdq_break(hdq_data); + + /* don't clock the HDQ until it is needed */ + clk_disable(hdq_data->hdq_ick); + clk_disable(hdq_data->hdq_fck); + + omap_w1_master.data = hdq_data; + + ret = w1_add_master_device(&omap_w1_master); + if (ret) { + dev_dbg(&pdev->dev, "Failure in registering w1 master\n"); + goto err_w1; + } + + return 0; + +err_w1: +err_irq: + clk_disable(hdq_data->hdq_fck); + +err_fnclk: + clk_disable(hdq_data->hdq_ick); + +err_intfclk: + clk_put(hdq_data->hdq_ick); + clk_put(hdq_data->hdq_fck); + +err_clk: + iounmap(hdq_data->hdq_base); + +err_ioremap: +err_resource: + platform_set_drvdata(pdev, NULL); + kfree(hdq_data); + +err_kmalloc: + return ret; + +} + +static int omap_hdq_remove(struct platform_device *pdev) +{ + struct hdq_data *hdq_data = platform_get_drvdata(pdev); + + mutex_lock(&hdq_data->hdq_mutex); + + if (hdq_data->hdq_usecount) { + dev_dbg(&pdev->dev, "removed when use count is not zero\n"); + return -EBUSY; + } + + mutex_unlock(&hdq_data->hdq_mutex); + + /* remove module dependency */ + clk_put(hdq_data->hdq_ick); + clk_put(hdq_data->hdq_fck); + free_irq(INT_24XX_HDQ_IRQ, hdq_data); + platform_set_drvdata(pdev, NULL); + iounmap(hdq_data->hdq_base); + kfree(hdq_data); + + return 0; +} + +static int __init +omap_hdq_init(void) +{ + return platform_driver_register(&omap_hdq_driver); +} +module_init(omap_hdq_init); + +static void __exit +omap_hdq_exit(void) +{ + platform_driver_unregister(&omap_hdq_driver); +} +module_exit(omap_hdq_exit); + +module_param(w1_id, int, S_IRUSR); +MODULE_PARM_DESC(w1_id, "1-wire id for the slave detection"); + +MODULE_AUTHOR("Texas Instruments"); +MODULE_DESCRIPTION("HDQ driver Library"); +MODULE_LICENSE("GPL"); diff --git a/drivers/w1/slaves/Kconfig b/drivers/w1/slaves/Kconfig index 3df29a122f8..8d0b1fb1e52 100644 --- a/drivers/w1/slaves/Kconfig +++ b/drivers/w1/slaves/Kconfig @@ -44,4 +44,11 @@ config W1_SLAVE_DS2760 If you are unsure, say N. +config W1_SLAVE_BQ27000 + tristate "BQ27000 slave support" + depends on W1 + help + Say Y here if you want to use a hdq + bq27000 slave support. + endmenu diff --git a/drivers/w1/slaves/Makefile b/drivers/w1/slaves/Makefile index a8eb7524df1..990f400b6d2 100644 --- a/drivers/w1/slaves/Makefile +++ b/drivers/w1/slaves/Makefile @@ -6,4 +6,4 @@ obj-$(CONFIG_W1_SLAVE_THERM) += w1_therm.o obj-$(CONFIG_W1_SLAVE_SMEM) += w1_smem.o obj-$(CONFIG_W1_SLAVE_DS2433) += w1_ds2433.o obj-$(CONFIG_W1_SLAVE_DS2760) += w1_ds2760.o - +obj-$(CONFIG_W1_SLAVE_BQ27000) += w1_bq27000.o diff --git a/drivers/w1/slaves/w1_bq27000.c b/drivers/w1/slaves/w1_bq27000.c new file mode 100644 index 00000000000..8f4c91f6c68 --- /dev/null +++ b/drivers/w1/slaves/w1_bq27000.c @@ -0,0 +1,123 @@ +/* + * drivers/w1/slaves/w1_bq27000.c + * + * Copyright (C) 2007 Texas Instruments, Inc. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + * + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/device.h> +#include <linux/types.h> +#include <linux/platform_device.h> +#include <linux/mutex.h> + +#include "../w1.h" +#include "../w1_int.h" +#include "../w1_family.h" + +#define HDQ_CMD_READ (0) +#define HDQ_CMD_WRITE (1<<7) + +static int F_ID; + +void w1_bq27000_write(struct device *dev, u8 buf, u8 reg) +{ + struct w1_slave *sl = container_of(dev, struct w1_slave, dev); + + if (!dev) { + pr_info("Could not obtain slave dev ptr\n"); + return; + } + + w1_write_8(sl->master, HDQ_CMD_WRITE | reg); + w1_write_8(sl->master, buf); +} +EXPORT_SYMBOL(w1_bq27000_write); + +int w1_bq27000_read(struct device *dev, u8 reg) +{ + u8 val; + struct w1_slave *sl = container_of(dev, struct w1_slave, dev); + + if (!dev) + return 0; + + w1_write_8(sl->master, HDQ_CMD_READ | reg); + val = w1_read_8(sl->master); + + return val; +} +EXPORT_SYMBOL(w1_bq27000_read); + +static int w1_bq27000_add_slave(struct w1_slave *sl) +{ + int ret; + int id = 1; + struct platform_device *pdev; + + pdev = platform_device_alloc("bq27000-battery", id); + if (!pdev) { + ret = -ENOMEM; + return ret; + } + pdev->dev.parent = &sl->dev; + + ret = platform_device_add(pdev); + if (ret) + goto pdev_add_failed; + + dev_set_drvdata(&sl->dev, pdev); + + goto success; + +pdev_add_failed: + platform_device_unregister(pdev); +success: + return ret; +} + +static void w1_bq27000_remove_slave(struct w1_slave *sl) +{ + struct platform_device *pdev = dev_get_drvdata(&sl->dev); + + platform_device_unregister(pdev); +} + +static struct w1_family_ops w1_bq27000_fops = { + .add_slave = w1_bq27000_add_slave, + .remove_slave = w1_bq27000_remove_slave, +}; + +static struct w1_family w1_bq27000_family = { + .fid = 1, + .fops = &w1_bq27000_fops, +}; + +static int __init w1_bq27000_init(void) +{ + if (F_ID) + w1_bq27000_family.fid = F_ID; + + return w1_register_family(&w1_bq27000_family); +} + +static void __exit w1_bq27000_exit(void) +{ + w1_unregister_family(&w1_bq27000_family); +} + + +module_init(w1_bq27000_init); +module_exit(w1_bq27000_exit); + +module_param(F_ID, int, S_IRUSR); +MODULE_PARM_DESC(F_ID, "1-wire slave FID for BQ device"); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Texas Instruments Ltd"); +MODULE_DESCRIPTION("HDQ/1-wire slave driver bq27000 battery monitor chip"); diff --git a/drivers/w1/w1.h b/drivers/w1/w1.h index cdaa6fffbfc..97304bd83ec 100644 --- a/drivers/w1/w1.h +++ b/drivers/w1/w1.h @@ -206,6 +206,7 @@ void w1_slave_detach(struct w1_slave *sl); u8 w1_triplet(struct w1_master *dev, int bdir); void w1_write_8(struct w1_master *, u8); +u8 w1_read_8(struct w1_master *); int w1_reset_bus(struct w1_master *); u8 w1_calc_crc8(u8 *, int); void w1_write_block(struct w1_master *, const u8 *, int); diff --git a/drivers/w1/w1_io.c b/drivers/w1/w1_io.c index f4f82f1f486..0d15b0eaf79 100644 --- a/drivers/w1/w1_io.c +++ b/drivers/w1/w1_io.c @@ -217,7 +217,7 @@ u8 w1_triplet(struct w1_master *dev, int bdir) * @param dev the master device * @return the byte read */ -static u8 w1_read_8(struct w1_master * dev) +u8 w1_read_8(struct w1_master *dev) { int i; u8 res = 0; @@ -230,6 +230,7 @@ static u8 w1_read_8(struct w1_master * dev) return res; } +EXPORT_SYMBOL_GPL(w1_read_8); /** * Writes a series of bytes. |