summaryrefslogtreecommitdiffstats
path: root/drivers
diff options
context:
space:
mode:
Diffstat (limited to 'drivers')
-rw-r--r--drivers/dma/pl330.c99
-rw-r--r--drivers/gpio/gpio-samsung.c72
-rw-r--r--drivers/input/keyboard/samsung-keypad.c174
-rw-r--r--drivers/rtc/rtc-s3c.c21
-rw-r--r--drivers/tty/serial/Kconfig44
-rw-r--r--drivers/tty/serial/Makefile5
-rw-r--r--drivers/tty/serial/s3c2410.c115
-rw-r--r--drivers/tty/serial/s3c2412.c149
-rw-r--r--drivers/tty/serial/s3c2440.c178
-rw-r--r--drivers/tty/serial/s3c6400.c149
-rw-r--r--drivers/tty/serial/s5pv210.c158
-rw-r--r--drivers/tty/serial/samsung.c639
-rw-r--r--drivers/tty/serial/samsung.h32
-rw-r--r--drivers/usb/host/ehci-tegra.c71
14 files changed, 776 insertions, 1130 deletions
diff --git a/drivers/dma/pl330.c b/drivers/dma/pl330.c
index 2d8d1b041d9..09adcfcd953 100644
--- a/drivers/dma/pl330.c
+++ b/drivers/dma/pl330.c
@@ -19,6 +19,7 @@
#include <linux/amba/pl330.h>
#include <linux/pm_runtime.h>
#include <linux/scatterlist.h>
+#include <linux/of.h>
#define NR_DEFAULT_DESC 16
@@ -116,6 +117,9 @@ struct dma_pl330_desc {
struct dma_pl330_chan *pchan;
};
+/* forward declaration */
+static struct amba_driver pl330_driver;
+
static inline struct dma_pl330_chan *
to_pchan(struct dma_chan *ch)
{
@@ -267,6 +271,32 @@ static void dma_pl330_rqcb(void *token, enum pl330_op_err err)
tasklet_schedule(&pch->task);
}
+bool pl330_filter(struct dma_chan *chan, void *param)
+{
+ u8 *peri_id;
+
+ if (chan->device->dev->driver != &pl330_driver.drv)
+ return false;
+
+#ifdef CONFIG_OF
+ if (chan->device->dev->of_node) {
+ const __be32 *prop_value;
+ phandle phandle;
+ struct device_node *node;
+
+ prop_value = ((struct property *)param)->value;
+ phandle = be32_to_cpup(prop_value++);
+ node = of_find_node_by_phandle(phandle);
+ return ((chan->private == node) &&
+ (chan->chan_id == be32_to_cpup(prop_value)));
+ }
+#endif
+
+ peri_id = chan->private;
+ return *peri_id == (unsigned)param;
+}
+EXPORT_SYMBOL(pl330_filter);
+
static int pl330_alloc_chan_resources(struct dma_chan *chan)
{
struct dma_pl330_chan *pch = to_pchan(chan);
@@ -497,7 +527,7 @@ pluck_desc(struct dma_pl330_dmac *pdmac)
static struct dma_pl330_desc *pl330_get_desc(struct dma_pl330_chan *pch)
{
struct dma_pl330_dmac *pdmac = pch->dmac;
- struct dma_pl330_peri *peri = pch->chan.private;
+ u8 *peri_id = pch->chan.private;
struct dma_pl330_desc *desc;
/* Pluck one desc from the pool of DMAC */
@@ -522,13 +552,7 @@ static struct dma_pl330_desc *pl330_get_desc(struct dma_pl330_chan *pch)
desc->txd.cookie = 0;
async_tx_ack(&desc->txd);
- if (peri) {
- desc->req.rqtype = peri->rqtype;
- desc->req.peri = pch->chan.chan_id;
- } else {
- desc->req.rqtype = MEMTOMEM;
- desc->req.peri = 0;
- }
+ desc->req.peri = peri_id ? pch->chan.chan_id : 0;
dma_async_tx_descriptor_init(&desc->txd, &pch->chan);
@@ -615,12 +639,14 @@ static struct dma_async_tx_descriptor *pl330_prep_dma_cyclic(
case DMA_TO_DEVICE:
desc->rqcfg.src_inc = 1;
desc->rqcfg.dst_inc = 0;
+ desc->req.rqtype = MEMTODEV;
src = dma_addr;
dst = pch->fifo_addr;
break;
case DMA_FROM_DEVICE:
desc->rqcfg.src_inc = 0;
desc->rqcfg.dst_inc = 1;
+ desc->req.rqtype = DEVTOMEM;
src = pch->fifo_addr;
dst = dma_addr;
break;
@@ -646,16 +672,12 @@ pl330_prep_dma_memcpy(struct dma_chan *chan, dma_addr_t dst,
{
struct dma_pl330_desc *desc;
struct dma_pl330_chan *pch = to_pchan(chan);
- struct dma_pl330_peri *peri = chan->private;
struct pl330_info *pi;
int burst;
if (unlikely(!pch || !len))
return NULL;
- if (peri && peri->rqtype != MEMTOMEM)
- return NULL;
-
pi = &pch->dmac->pif;
desc = __pl330_prep_dma_memcpy(pch, dst, src, len);
@@ -664,6 +686,7 @@ pl330_prep_dma_memcpy(struct dma_chan *chan, dma_addr_t dst,
desc->rqcfg.src_inc = 1;
desc->rqcfg.dst_inc = 1;
+ desc->req.rqtype = MEMTOMEM;
/* Select max possible burst size */
burst = pi->pcfg.data_bus_width / 8;
@@ -692,25 +715,14 @@ pl330_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl,
{
struct dma_pl330_desc *first, *desc = NULL;
struct dma_pl330_chan *pch = to_pchan(chan);
- struct dma_pl330_peri *peri = chan->private;
struct scatterlist *sg;
unsigned long flags;
int i;
dma_addr_t addr;
- if (unlikely(!pch || !sgl || !sg_len || !peri))
+ if (unlikely(!pch || !sgl || !sg_len))
return NULL;
- /* Make sure the direction is consistent */
- if ((direction == DMA_TO_DEVICE &&
- peri->rqtype != MEMTODEV) ||
- (direction == DMA_FROM_DEVICE &&
- peri->rqtype != DEVTOMEM)) {
- dev_err(pch->dmac->pif.dev, "%s:%d Invalid Direction\n",
- __func__, __LINE__);
- return NULL;
- }
-
addr = pch->fifo_addr;
first = NULL;
@@ -750,11 +762,13 @@ pl330_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl,
if (direction == DMA_TO_DEVICE) {
desc->rqcfg.src_inc = 1;
desc->rqcfg.dst_inc = 0;
+ desc->req.rqtype = MEMTODEV;
fill_px(&desc->px,
addr, sg_dma_address(sg), sg_dma_len(sg));
} else {
desc->rqcfg.src_inc = 0;
desc->rqcfg.dst_inc = 1;
+ desc->req.rqtype = DEVTOMEM;
fill_px(&desc->px,
sg_dma_address(sg), addr, sg_dma_len(sg));
}
@@ -856,32 +870,16 @@ pl330_probe(struct amba_device *adev, const struct amba_id *id)
INIT_LIST_HEAD(&pd->channels);
/* Initialize channel parameters */
- num_chan = max(pdat ? pdat->nr_valid_peri : 0, (u8)pi->pcfg.num_chan);
+ num_chan = max(pdat ? pdat->nr_valid_peri : (u8)pi->pcfg.num_peri,
+ (u8)pi->pcfg.num_chan);
pdmac->peripherals = kzalloc(num_chan * sizeof(*pch), GFP_KERNEL);
for (i = 0; i < num_chan; i++) {
pch = &pdmac->peripherals[i];
- if (pdat) {
- struct dma_pl330_peri *peri = &pdat->peri[i];
-
- switch (peri->rqtype) {
- case MEMTOMEM:
- dma_cap_set(DMA_MEMCPY, pd->cap_mask);
- break;
- case MEMTODEV:
- case DEVTOMEM:
- dma_cap_set(DMA_SLAVE, pd->cap_mask);
- dma_cap_set(DMA_CYCLIC, pd->cap_mask);
- break;
- default:
- dev_err(&adev->dev, "DEVTODEV Not Supported\n");
- continue;
- }
- pch->chan.private = peri;
- } else {
- dma_cap_set(DMA_MEMCPY, pd->cap_mask);
- pch->chan.private = NULL;
- }
+ if (!adev->dev.of_node)
+ pch->chan.private = pdat ? &pdat->peri_id[i] : NULL;
+ else
+ pch->chan.private = adev->dev.of_node;
INIT_LIST_HEAD(&pch->work_list);
spin_lock_init(&pch->lock);
@@ -894,6 +892,15 @@ pl330_probe(struct amba_device *adev, const struct amba_id *id)
}
pd->dev = &adev->dev;
+ if (pdat) {
+ pd->cap_mask = pdat->cap_mask;
+ } else {
+ dma_cap_set(DMA_MEMCPY, pd->cap_mask);
+ if (pi->pcfg.num_peri) {
+ dma_cap_set(DMA_SLAVE, pd->cap_mask);
+ dma_cap_set(DMA_CYCLIC, pd->cap_mask);
+ }
+ }
pd->device_alloc_chan_resources = pl330_alloc_chan_resources;
pd->device_free_chan_resources = pl330_free_chan_resources;
diff --git a/drivers/gpio/gpio-samsung.c b/drivers/gpio/gpio-samsung.c
index ab098ba9f1d..a7661773c05 100644
--- a/drivers/gpio/gpio-samsung.c
+++ b/drivers/gpio/gpio-samsung.c
@@ -24,6 +24,9 @@
#include <linux/interrupt.h>
#include <linux/device.h>
#include <linux/ioport.h>
+#include <linux/of.h>
+#include <linux/slab.h>
+#include <linux/of_address.h>
#include <asm/irq.h>
@@ -2383,6 +2386,63 @@ static struct samsung_gpio_chip exynos4_gpios_3[] = {
#endif
};
+#if defined(CONFIG_ARCH_EXYNOS4) && defined(CONFIG_OF)
+static int exynos4_gpio_xlate(struct gpio_chip *gc, struct device_node *np,
+ const void *gpio_spec, u32 *flags)
+{
+ const __be32 *gpio = gpio_spec;
+ const u32 n = be32_to_cpup(gpio);
+ unsigned int pin = gc->base + be32_to_cpu(gpio[0]);
+
+ if (WARN_ON(gc->of_gpio_n_cells < 4))
+ return -EINVAL;
+
+ if (n > gc->ngpio)
+ return -EINVAL;
+
+ if (s3c_gpio_cfgpin(pin, S3C_GPIO_SFN(be32_to_cpu(gpio[1]))))
+ pr_warn("gpio_xlate: failed to set pin function\n");
+ if (s3c_gpio_setpull(pin, be32_to_cpu(gpio[2])))
+ pr_warn("gpio_xlate: failed to set pin pull up/down\n");
+ if (s5p_gpio_set_drvstr(pin, be32_to_cpu(gpio[3])))
+ pr_warn("gpio_xlate: failed to set pin drive strength\n");
+
+ return n;
+}
+
+static const struct of_device_id exynos4_gpio_dt_match[] __initdata = {
+ { .compatible = "samsung,exynos4-gpio", },
+ {}
+};
+
+static __init void exynos4_gpiolib_attach_ofnode(struct samsung_gpio_chip *chip,
+ u64 base, u64 offset)
+{
+ struct gpio_chip *gc = &chip->chip;
+ u64 address;
+
+ if (!of_have_populated_dt())
+ return;
+
+ address = chip->base ? base + ((u32)chip->base & 0xfff) : base + offset;
+ gc->of_node = of_find_matching_node_by_address(NULL,
+ exynos4_gpio_dt_match, address);
+ if (!gc->of_node) {
+ pr_info("gpio: device tree node not found for gpio controller"
+ " with base address %08llx\n", address);
+ return;
+ }
+ gc->of_gpio_n_cells = 4;
+ gc->of_xlate = exynos4_gpio_xlate;
+}
+#elif defined(CONFIG_ARCH_EXYNOS4)
+static __init void exynos4_gpiolib_attach_ofnode(struct samsung_gpio_chip *chip,
+ u64 base, u64 offset)
+{
+ return;
+}
+#endif /* defined(CONFIG_ARCH_EXYNOS4) && defined(CONFIG_OF) */
+
/* TODO: cleanup soc_is_* */
static __init int samsung_gpiolib_init(void)
{
@@ -2464,6 +2524,10 @@ static __init int samsung_gpiolib_init(void)
chip->config = &exynos4_gpio_cfg;
chip->group = group++;
}
+#ifdef CONFIG_CPU_EXYNOS4210
+ exynos4_gpiolib_attach_ofnode(chip,
+ EXYNOS4_PA_GPIO1, i * 0x20);
+#endif
}
samsung_gpiolib_add_4bit_chips(exynos4_gpios_1, nr_chips, S5P_VA_GPIO1);
@@ -2476,6 +2540,10 @@ static __init int samsung_gpiolib_init(void)
chip->config = &exynos4_gpio_cfg;
chip->group = group++;
}
+#ifdef CONFIG_CPU_EXYNOS4210
+ exynos4_gpiolib_attach_ofnode(chip,
+ EXYNOS4_PA_GPIO2, i * 0x20);
+#endif
}
samsung_gpiolib_add_4bit_chips(exynos4_gpios_2, nr_chips, S5P_VA_GPIO2);
@@ -2488,6 +2556,10 @@ static __init int samsung_gpiolib_init(void)
chip->config = &exynos4_gpio_cfg;
chip->group = group++;
}
+#ifdef CONFIG_CPU_EXYNOS4210
+ exynos4_gpiolib_attach_ofnode(chip,
+ EXYNOS4_PA_GPIO3, i * 0x20);
+#endif
}
samsung_gpiolib_add_4bit_chips(exynos4_gpios_3, nr_chips, S5P_VA_GPIO3);
diff --git a/drivers/input/keyboard/samsung-keypad.c b/drivers/input/keyboard/samsung-keypad.c
index f689f49e310..8a0060cd398 100644
--- a/drivers/input/keyboard/samsung-keypad.c
+++ b/drivers/input/keyboard/samsung-keypad.c
@@ -21,6 +21,8 @@
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
#include <linux/sched.h>
#include <plat/keypad.h>
@@ -68,31 +70,26 @@ struct samsung_keypad {
wait_queue_head_t wait;
bool stopped;
int irq;
+ enum samsung_keypad_type type;
unsigned int row_shift;
unsigned int rows;
unsigned int cols;
unsigned int row_state[SAMSUNG_MAX_COLS];
+#ifdef CONFIG_OF
+ int row_gpios[SAMSUNG_MAX_ROWS];
+ int col_gpios[SAMSUNG_MAX_COLS];
+#endif
unsigned short keycodes[];
};
-static int samsung_keypad_is_s5pv210(struct device *dev)
-{
- struct platform_device *pdev = to_platform_device(dev);
- enum samsung_keypad_type type =
- platform_get_device_id(pdev)->driver_data;
-
- return type == KEYPAD_TYPE_S5PV210;
-}
-
static void samsung_keypad_scan(struct samsung_keypad *keypad,
unsigned int *row_state)
{
- struct device *dev = keypad->input_dev->dev.parent;
unsigned int col;
unsigned int val;
for (col = 0; col < keypad->cols; col++) {
- if (samsung_keypad_is_s5pv210(dev)) {
+ if (keypad->type == KEYPAD_TYPE_S5PV210) {
val = S5PV210_KEYIFCOLEN_MASK;
val &= ~(1 << col) << 8;
} else {
@@ -235,6 +232,126 @@ static void samsung_keypad_close(struct input_dev *input_dev)
samsung_keypad_stop(keypad);
}
+#ifdef CONFIG_OF
+static struct samsung_keypad_platdata *samsung_keypad_parse_dt(
+ struct device *dev)
+{
+ struct samsung_keypad_platdata *pdata;
+ struct matrix_keymap_data *keymap_data;
+ uint32_t *keymap, num_rows = 0, num_cols = 0;
+ struct device_node *np = dev->of_node, *key_np;
+ unsigned int key_count = 0;
+
+ pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
+ if (!pdata) {
+ dev_err(dev, "could not allocate memory for platform data\n");
+ return NULL;
+ }
+
+ of_property_read_u32(np, "samsung,keypad-num-rows", &num_rows);
+ of_property_read_u32(np, "samsung,keypad-num-columns", &num_cols);
+ if (!num_rows || !num_cols) {
+ dev_err(dev, "number of keypad rows/columns not specified\n");
+ return NULL;
+ }
+ pdata->rows = num_rows;
+ pdata->cols = num_cols;
+
+ keymap_data = devm_kzalloc(dev, sizeof(*keymap_data), GFP_KERNEL);
+ if (!keymap_data) {
+ dev_err(dev, "could not allocate memory for keymap data\n");
+ return NULL;
+ }
+ pdata->keymap_data = keymap_data;
+
+ for_each_child_of_node(np, key_np)
+ key_count++;
+
+ keymap_data->keymap_size = key_count;
+ keymap = devm_kzalloc(dev, sizeof(uint32_t) * key_count, GFP_KERNEL);
+ if (!keymap) {
+ dev_err(dev, "could not allocate memory for keymap\n");
+ return NULL;
+ }
+ keymap_data->keymap = keymap;
+
+ for_each_child_of_node(np, key_np) {
+ u32 row, col, key_code;
+ of_property_read_u32(key_np, "keypad,row", &row);
+ of_property_read_u32(key_np, "keypad,column", &col);
+ of_property_read_u32(key_np, "linux,code", &key_code);
+ *keymap++ = KEY(row, col, key_code);
+ }
+
+ if (of_get_property(np, "linux,input-no-autorepeat", NULL))
+ pdata->no_autorepeat = true;
+ if (of_get_property(np, "linux,input-wakeup", NULL))
+ pdata->wakeup = true;
+
+ return pdata;
+}
+
+static void samsung_keypad_parse_dt_gpio(struct device *dev,
+ struct samsung_keypad *keypad)
+{
+ struct device_node *np = dev->of_node;
+ int gpio, ret, row, col;
+
+ for (row = 0; row < keypad->rows; row++) {
+ gpio = of_get_named_gpio(np, "row-gpios", row);
+ keypad->row_gpios[row] = gpio;
+ if (!gpio_is_valid(gpio)) {
+ dev_err(dev, "keypad row[%d]: invalid gpio %d\n",
+ row, gpio);
+ continue;
+ }
+
+ ret = gpio_request(gpio, "keypad-row");
+ if (ret)
+ dev_err(dev, "keypad row[%d] gpio request failed\n",
+ row);
+ }
+
+ for (col = 0; col < keypad->cols; col++) {
+ gpio = of_get_named_gpio(np, "col-gpios", col);
+ keypad->col_gpios[col] = gpio;
+ if (!gpio_is_valid(gpio)) {
+ dev_err(dev, "keypad column[%d]: invalid gpio %d\n",
+ col, gpio);
+ continue;
+ }
+
+ ret = gpio_request(gpio, "keypad-col");
+ if (ret)
+ dev_err(dev, "keypad column[%d] gpio request failed\n",
+ col);
+ }
+}
+
+static void samsung_keypad_dt_gpio_free(struct samsung_keypad *keypad)
+{
+ int cnt;
+
+ for (cnt = 0; cnt < keypad->rows; cnt++)
+ if (gpio_is_valid(keypad->row_gpios[cnt]))
+ gpio_free(keypad->row_gpios[cnt]);
+
+ for (cnt = 0; cnt < keypad->cols; cnt++)
+ if (gpio_is_valid(keypad->col_gpios[cnt]))
+ gpio_free(keypad->col_gpios[cnt]);
+}
+#else
+static
+struct samsung_keypad_platdata *samsung_keypad_parse_dt(struct device *dev)
+{
+ return NULL;
+}
+
+static void samsung_keypad_dt_gpio_free(struct samsung_keypad *keypad)
+{
+}
+#endif
+
static int __devinit samsung_keypad_probe(struct platform_device *pdev)
{
const struct samsung_keypad_platdata *pdata;
@@ -246,7 +363,10 @@ static int __devinit samsung_keypad_probe(struct platform_device *pdev)
unsigned int keymap_size;
int error;
- pdata = pdev->dev.platform_data;
+ if (pdev->dev.of_node)
+ pdata = samsung_keypad_parse_dt(&pdev->dev);
+ else
+ pdata = pdev->dev.platform_data;
if (!pdata) {
dev_err(&pdev->dev, "no platform data defined\n");
return -EINVAL;
@@ -303,6 +423,16 @@ static int __devinit samsung_keypad_probe(struct platform_device *pdev)
keypad->cols = pdata->cols;
init_waitqueue_head(&keypad->wait);
+ if (pdev->dev.of_node) {
+#ifdef CONFIG_OF
+ samsung_keypad_parse_dt_gpio(&pdev->dev, keypad);
+ keypad->type = of_device_is_compatible(pdev->dev.of_node,
+ "samsung,s5pv210-keypad");
+#endif
+ } else {
+ keypad->type = platform_get_device_id(pdev)->driver_data;
+ }
+
input_dev->name = pdev->name;
input_dev->id.bustype = BUS_HOST;
input_dev->dev.parent = &pdev->dev;
@@ -343,12 +473,19 @@ static int __devinit samsung_keypad_probe(struct platform_device *pdev)
device_init_wakeup(&pdev->dev, pdata->wakeup);
platform_set_drvdata(pdev, keypad);
+
+ if (pdev->dev.of_node) {
+ devm_kfree(&pdev->dev, (void *)pdata->keymap_data->keymap);
+ devm_kfree(&pdev->dev, (void *)pdata->keymap_data);
+ devm_kfree(&pdev->dev, (void *)pdata);
+ }
return 0;
err_free_irq:
free_irq(keypad->irq, keypad);
err_put_clk:
clk_put(keypad->clk);
+ samsung_keypad_dt_gpio_free(keypad);
err_unmap_base:
iounmap(keypad->base);
err_free_mem:
@@ -374,6 +511,7 @@ static int __devexit samsung_keypad_remove(struct platform_device *pdev)
free_irq(keypad->irq, keypad);
clk_put(keypad->clk);
+ samsung_keypad_dt_gpio_free(keypad);
iounmap(keypad->base);
kfree(keypad);
@@ -447,6 +585,17 @@ static const struct dev_pm_ops samsung_keypad_pm_ops = {
};
#endif
+#ifdef CONFIG_OF
+static const struct of_device_id samsung_keypad_dt_match[] = {
+ { .compatible = "samsung,s3c6410-keypad" },
+ { .compatible = "samsung,s5pv210-keypad" },
+ {},
+};
+MODULE_DEVICE_TABLE(of, samsung_keypad_dt_match);
+#else
+#define samsung_keypad_dt_match NULL
+#endif
+
static struct platform_device_id samsung_keypad_driver_ids[] = {
{
.name = "samsung-keypad",
@@ -465,6 +614,7 @@ static struct platform_driver samsung_keypad_driver = {
.driver = {
.name = "samsung-keypad",
.owner = THIS_MODULE,
+ .of_match_table = samsung_keypad_dt_match,
#ifdef CONFIG_PM
.pm = &samsung_keypad_pm_ops,
#endif
diff --git a/drivers/rtc/rtc-s3c.c b/drivers/rtc/rtc-s3c.c
index 5b979d9cc33..175067a17c4 100644
--- a/drivers/rtc/rtc-s3c.c
+++ b/drivers/rtc/rtc-s3c.c
@@ -25,6 +25,7 @@
#include <linux/clk.h>
#include <linux/log2.h>
#include <linux/slab.h>
+#include <linux/of.h>
#include <mach/hardware.h>
#include <asm/uaccess.h>
@@ -507,7 +508,13 @@ static int __devinit s3c_rtc_probe(struct platform_device *pdev)
goto err_nortc;
}
- s3c_rtc_cpu_type = platform_get_device_id(pdev)->driver_data;
+#ifdef CONFIG_OF
+ if (pdev->dev.of_node)
+ s3c_rtc_cpu_type = of_device_is_compatible(pdev->dev.of_node,
+ "samsung,s3c6410-rtc") ? TYPE_S3C64XX : TYPE_S3C2410;
+ else
+#endif
+ s3c_rtc_cpu_type = platform_get_device_id(pdev)->driver_data;
/* Check RTC Time */
@@ -629,6 +636,17 @@ static int s3c_rtc_resume(struct platform_device *pdev)
#define s3c_rtc_resume NULL
#endif
+#ifdef CONFIG_OF
+static const struct of_device_id s3c_rtc_dt_match[] = {
+ { .compatible = "samsung,s3c2410-rtc" },
+ { .compatible = "samsung,s3c6410-rtc" },
+ {},
+};
+MODULE_DEVICE_TABLE(of, s3c_rtc_dt_match);
+#else
+#define s3c_rtc_dt_match NULL
+#endif
+
static struct platform_device_id s3c_rtc_driver_ids[] = {
{
.name = "s3c2410-rtc",
@@ -651,6 +669,7 @@ static struct platform_driver s3c_rtc_driver = {
.driver = {
.name = "s3c-rtc",
.owner = THIS_MODULE,
+ .of_match_table = s3c_rtc_dt_match,
},
};
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index 113fccf8251..f32a2ea7010 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -462,7 +462,7 @@ config SERIAL_SAMSUNG
config SERIAL_SAMSUNG_UARTS_4
bool
depends on ARM && PLAT_SAMSUNG
- default y if CPU_S3C2443
+ default y if !(CPU_S3C2410 || SERIAL_S3C2412 || CPU_S3C2440 || CPU_S3C2442)
help
Internal node for the common case of 4 Samsung compatible UARTs
@@ -470,7 +470,7 @@ config SERIAL_SAMSUNG_UARTS
int
depends on ARM && PLAT_SAMSUNG
default 6 if ARCH_S5P6450
- default 4 if SERIAL_SAMSUNG_UARTS_4
+ default 4 if SERIAL_SAMSUNG_UARTS_4 || CPU_S3C2416
default 3
help
Select the number of available UART ports for the Samsung S3C
@@ -500,46 +500,6 @@ config SERIAL_SAMSUNG_CONSOLE
your boot loader about how to pass options to the kernel at
boot time.)
-config SERIAL_S3C2410
- tristate "Samsung S3C2410 Serial port support"
- depends on SERIAL_SAMSUNG && CPU_S3C2410
- default y if CPU_S3C2410
- help
- Serial port support for the Samsung S3C2410 SoC
-
-config SERIAL_S3C2412
- tristate "Samsung S3C2412/S3C2413 Serial port support"
- depends on SERIAL_SAMSUNG && CPU_S3C2412
- default y if CPU_S3C2412
- help
- Serial port support for the Samsung S3C2412 and S3C2413 SoC
-
-config SERIAL_S3C2440
- tristate "Samsung S3C2440/S3C2442/S3C2416 Serial port support"
- depends on SERIAL_SAMSUNG && (CPU_S3C2440 || CPU_S3C2442 || CPU_S3C2416)
- default y if CPU_S3C2440
- default y if CPU_S3C2442
- select SERIAL_SAMSUNG_UARTS_4 if CPU_S3C2416
- help
- Serial port support for the Samsung S3C2440, S3C2416 and S3C2442 SoC
-
-config SERIAL_S3C6400
- tristate "Samsung S3C6400/S3C6410/S5P6440/S5P6450/S5PC100 Serial port support"
- depends on SERIAL_SAMSUNG && (CPU_S3C6400 || CPU_S3C6410 || CPU_S5P6440 || CPU_S5P6450 || CPU_S5PC100)
- select SERIAL_SAMSUNG_UARTS_4
- default y
- help
- Serial port support for the Samsung S3C6400, S3C6410, S5P6440, S5P6450
- and S5PC100 SoCs
-
-config SERIAL_S5PV210
- tristate "Samsung S5PV210 Serial port support"
- depends on SERIAL_SAMSUNG && (CPU_S5PV210 || CPU_EXYNOS4210 || SOC_EXYNOS4212)
- select SERIAL_SAMSUNG_UARTS_4 if (CPU_S5PV210 || CPU_EXYNOS4210 || SOC_EXYNOS4212)
- default y
- help
- Serial port support for Samsung's S5P Family of SoC's
-
config SERIAL_SIRFSOC
tristate "SiRF SoC Platform Serial port support"
depends on ARM && ARCH_PRIMA2
diff --git a/drivers/tty/serial/Makefile b/drivers/tty/serial/Makefile
index 75eadb8d717..07e0494c683 100644
--- a/drivers/tty/serial/Makefile
+++ b/drivers/tty/serial/Makefile
@@ -40,11 +40,6 @@ obj-$(CONFIG_SERIAL_BCM63XX) += bcm63xx_uart.o
obj-$(CONFIG_SERIAL_BFIN) += bfin_uart.o
obj-$(CONFIG_SERIAL_BFIN_SPORT) += bfin_sport_uart.o
obj-$(CONFIG_SERIAL_SAMSUNG) += samsung.o
-obj-$(CONFIG_SERIAL_S3C2410) += s3c2410.o
-obj-$(CONFIG_SERIAL_S3C2412) += s3c2412.o
-obj-$(CONFIG_SERIAL_S3C2440) += s3c2440.o
-obj-$(CONFIG_SERIAL_S3C6400) += s3c6400.o
-obj-$(CONFIG_SERIAL_S5PV210) += s5pv210.o
obj-$(CONFIG_SERIAL_MAX3100) += max3100.o
obj-$(CONFIG_SERIAL_MAX3107) += max3107.o
obj-$(CONFIG_SERIAL_MAX3107_AAVA) += max3107-aava.o
diff --git a/drivers/tty/serial/s3c2410.c b/drivers/tty/serial/s3c2410.c
deleted file mode 100644
index b1d7e7c1849..00000000000
--- a/drivers/tty/serial/s3c2410.c
+++ /dev/null
@@ -1,115 +0,0 @@
-/*
- * Driver for Samsung S3C2410 SoC onboard UARTs.
- *
- * Ben Dooks, Copyright (c) 2003-2008 Simtec Electronics
- * http://armlinux.simtec.co.uk/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/module.h>
-#include <linux/ioport.h>
-#include <linux/io.h>
-#include <linux/platform_device.h>
-#include <linux/init.h>
-#include <linux/serial_core.h>
-#include <linux/serial.h>
-
-#include <asm/irq.h>
-#include <mach/hardware.h>
-
-#include <plat/regs-serial.h>
-#include <mach/regs-gpio.h>
-
-#include "samsung.h"
-
-static int s3c2410_serial_setsource(struct uart_port *port,
- struct s3c24xx_uart_clksrc *clk)
-{
- unsigned long ucon = rd_regl(port, S3C2410_UCON);
-
- if (strcmp(clk->name, "uclk") == 0)
- ucon |= S3C2410_UCON_UCLK;
- else
- ucon &= ~S3C2410_UCON_UCLK;
-
- wr_regl(port, S3C2410_UCON, ucon);
- return 0;
-}
-
-static int s3c2410_serial_getsource(struct uart_port *port,
- struct s3c24xx_uart_clksrc *clk)
-{
- unsigned long ucon = rd_regl(port, S3C2410_UCON);
-
- clk->divisor = 1;
- clk->name = (ucon & S3C2410_UCON_UCLK) ? "uclk" : "pclk";
-
- return 0;
-}
-
-static int s3c2410_serial_resetport(struct uart_port *port,
- struct s3c2410_uartcfg *cfg)
-{
- dbg("s3c2410_serial_resetport: port=%p (%08lx), cfg=%p\n",
- port, port->mapbase, cfg);
-
- wr_regl(port, S3C2410_UCON, cfg->ucon);
- wr_regl(port, S3C2410_ULCON, cfg->ulcon);
-
- /* reset both fifos */
-
- wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH);
- wr_regl(port, S3C2410_UFCON, cfg->ufcon);
-
- return 0;
-}
-
-static struct s3c24xx_uart_info s3c2410_uart_inf = {
- .name = "Samsung S3C2410 UART",
- .type = PORT_S3C2410,
- .fifosize = 16,
- .rx_fifomask = S3C2410_UFSTAT_RXMASK,
- .rx_fifoshift = S3C2410_UFSTAT_RXSHIFT,
- .rx_fifofull = S3C2410_UFSTAT_RXFULL,
- .tx_fifofull = S3C2410_UFSTAT_TXFULL,
- .tx_fifomask = S3C2410_UFSTAT_TXMASK,
- .tx_fifoshift = S3C2410_UFSTAT_TXSHIFT,
- .get_clksrc = s3c2410_serial_getsource,
- .set_clksrc = s3c2410_serial_setsource,
- .reset_port = s3c2410_serial_resetport,
-};
-
-static int s3c2410_serial_probe(struct platform_device *dev)
-{
- return s3c24xx_serial_probe(dev, &s3c2410_uart_inf);
-}
-
-static struct platform_driver s3c2410_serial_driver = {
- .probe = s3c2410_serial_probe,
- .remove = __devexit_p(s3c24xx_serial_remove),
- .driver = {
- .name = "s3c2410-uart",
- .owner = THIS_MODULE,
- },
-};
-
-static int __init s3c2410_serial_init(void)
-{
- return s3c24xx_serial_init(&s3c2410_serial_driver, &s3c2410_uart_inf);
-}
-
-static void __exit s3c2410_serial_exit(void)
-{
- platform_driver_unregister(&s3c2410_serial_driver);
-}
-
-module_init(s3c2410_serial_init);
-module_exit(s3c2410_serial_exit);
-
-MODULE_LICENSE("GPL v2");
-MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
-MODULE_DESCRIPTION("Samsung S3C2410 SoC Serial port driver");
-MODULE_ALIAS("platform:s3c2410-uart");
diff --git a/drivers/tty/serial/s3c2412.c b/drivers/tty/serial/s3c2412.c
deleted file mode 100644
index 2234bf9ced4..00000000000
--- a/drivers/tty/serial/s3c2412.c
+++ /dev/null
@@ -1,149 +0,0 @@
-/*
- * Driver for Samsung S3C2412 and S3C2413 SoC onboard UARTs.
- *
- * Ben Dooks, Copyright (c) 2003-2008 Simtec Electronics
- * http://armlinux.simtec.co.uk/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/module.h>
-#include <linux/ioport.h>
-#include <linux/io.h>
-#include <linux/platform_device.h>
-#include <linux/init.h>
-#include <linux/serial_core.h>
-#include <linux/serial.h>
-
-#include <asm/irq.h>
-#include <mach/hardware.h>
-
-#include <plat/regs-serial.h>
-#include <mach/regs-gpio.h>
-
-#include "samsung.h"
-
-static int s3c2412_serial_setsource(struct uart_port *port,
- struct s3c24xx_uart_clksrc *clk)
-{
- unsigned long ucon = rd_regl(port, S3C2410_UCON);
-
- ucon &= ~S3C2412_UCON_CLKMASK;
-
- if (strcmp(clk->name, "uclk") == 0)
- ucon |= S3C2440_UCON_UCLK;
- else if (strcmp(clk->name, "pclk") == 0)
- ucon |= S3C2440_UCON_PCLK;
- else if (strcmp(clk->name, "usysclk") == 0)
- ucon |= S3C2412_UCON_USYSCLK;
- else {
- printk(KERN_ERR "unknown clock source %s\n", clk->name);
- return -EINVAL;
- }
-
- wr_regl(port, S3C2410_UCON, ucon);
- return 0;
-}
-
-
-static int s3c2412_serial_getsource(struct uart_port *port,
- struct s3c24xx_uart_clksrc *clk)
-{
- unsigned long ucon = rd_regl(port, S3C2410_UCON);
-
- switch (ucon & S3C2412_UCON_CLKMASK) {
- case S3C2412_UCON_UCLK:
- clk->divisor = 1;
- clk->name = "uclk";
- break;
-
- case S3C2412_UCON_PCLK:
- case S3C2412_UCON_PCLK2:
- clk->divisor = 1;
- clk->name = "pclk";
- break;
-
- case S3C2412_UCON_USYSCLK:
- clk->divisor = 1;
- clk->name = "usysclk";
- break;
- }
-
- return 0;
-}
-
-static int s3c2412_serial_resetport(struct uart_port *port,
- struct s3c2410_uartcfg *cfg)
-{
- unsigned long ucon = rd_regl(port, S3C2410_UCON);
-
- dbg("%s: port=%p (%08lx), cfg=%p\n",
- __func__, port, port->mapbase, cfg);
-
- /* ensure we don't change the clock settings... */
-
- ucon &= S3C2412_UCON_CLKMASK;
-
- wr_regl(port, S3C2410_UCON, ucon | cfg->ucon);
- wr_regl(port, S3C2410_ULCON, cfg->ulcon);
-
- /* reset both fifos */
-
- wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH);
- wr_regl(port, S3C2410_UFCON, cfg->ufcon);
-
- return 0;
-}
-
-static struct s3c24xx_uart_info s3c2412_uart_inf = {
- .name = "Samsung S3C2412 UART",
- .type = PORT_S3C2412,
- .fifosize = 64,
- .has_divslot = 1,
- .rx_fifomask = S3C2440_UFSTAT_RXMASK,
- .rx_fifoshift = S3C2440_UFSTAT_RXSHIFT,
- .rx_fifofull = S3C2440_UFSTAT_RXFULL,
- .tx_fifofull = S3C2440_UFSTAT_TXFULL,
- .tx_fifomask = S3C2440_UFSTAT_TXMASK,
- .tx_fifoshift = S3C2440_UFSTAT_TXSHIFT,
- .get_clksrc = s3c2412_serial_getsource,
- .set_clksrc = s3c2412_serial_setsource,
- .reset_port = s3c2412_serial_resetport,
-};
-
-/* device management */
-
-static int s3c2412_serial_probe(struct platform_device *dev)
-{
- dbg("s3c2440_serial_probe: dev=%p\n", dev);
- return s3c24xx_serial_probe(dev, &s3c2412_uart_inf);
-}
-
-static struct platform_driver s3c2412_serial_driver = {
- .probe = s3c2412_serial_probe,
- .remove = __devexit_p(s3c24xx_serial_remove),
- .driver = {
- .name = "s3c2412-uart",
- .owner = THIS_MODULE,
- },
-};
-
-static inline int s3c2412_serial_init(void)
-{
- return s3c24xx_serial_init(&s3c2412_serial_driver, &s3c2412_uart_inf);
-}
-
-static inline void s3c2412_serial_exit(void)
-{
- platform_driver_unregister(&s3c2412_serial_driver);
-}
-
-module_init(s3c2412_serial_init);
-module_exit(s3c2412_serial_exit);
-
-MODULE_DESCRIPTION("Samsung S3C2412,S3C2413 SoC Serial port driver");
-MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
-MODULE_LICENSE("GPL v2");
-MODULE_ALIAS("platform:s3c2412-uart");
diff --git a/drivers/tty/serial/s3c2440.c b/drivers/tty/serial/s3c2440.c
deleted file mode 100644
index 1d0c324b813..00000000000
--- a/drivers/tty/serial/s3c2440.c
+++ /dev/null
@@ -1,178 +0,0 @@
-/*
- * Driver for Samsung S3C2440 and S3C2442 SoC onboard UARTs.
- *
- * Ben Dooks, Copyright (c) 2003-2008 Simtec Electronics
- * http://armlinux.simtec.co.uk/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/module.h>
-#include <linux/ioport.h>
-#include <linux/io.h>
-#include <linux/platform_device.h>
-#include <linux/init.h>
-#include <linux/serial_core.h>
-#include <linux/serial.h>
-
-#include <asm/irq.h>
-#include <mach/hardware.h>
-
-#include <plat/regs-serial.h>
-#include <mach/regs-gpio.h>
-
-#include "samsung.h"
-
-
-static int s3c2440_serial_setsource(struct uart_port *port,
- struct s3c24xx_uart_clksrc *clk)
-{
- unsigned long ucon = rd_regl(port, S3C2410_UCON);
-
- /* todo - proper fclk<>nonfclk switch. */
-
- ucon &= ~S3C2440_UCON_CLKMASK;
-
- if (strcmp(clk->name, "uclk") == 0)
- ucon |= S3C2440_UCON_UCLK;
- else if (strcmp(clk->name, "pclk") == 0)
- ucon |= S3C2440_UCON_PCLK;
- else if (strcmp(clk->name, "fclk") == 0)
- ucon |= S3C2440_UCON_FCLK;
- else {
- printk(KERN_ERR "unknown clock source %s\n", clk->name);
- return -EINVAL;
- }
-
- wr_regl(port, S3C2410_UCON, ucon);
- return 0;
-}
-
-
-static int s3c2440_serial_getsource(struct uart_port *port,
- struct s3c24xx_uart_clksrc *clk)
-{
- unsigned long ucon = rd_regl(port, S3C2410_UCON);
- unsigned long ucon0, ucon1, ucon2;
-
- switch (ucon & S3C2440_UCON_CLKMASK) {
- case S3C2440_UCON_UCLK:
- clk->divisor = 1;
- clk->name = "uclk";
- break;
-
- case S3C2440_UCON_PCLK:
- case S3C2440_UCON_PCLK2:
- clk->divisor = 1;
- clk->name = "pclk";
- break;
-
- case S3C2440_UCON_FCLK:
- /* the fun of calculating the uart divisors on
- * the s3c2440 */
-
- ucon0 = __raw_readl(S3C24XX_VA_UART0 + S3C2410_UCON);
- ucon1 = __raw_readl(S3C24XX_VA_UART1 + S3C2410_UCON);
- ucon2 = __raw_readl(S3C24XX_VA_UART2 + S3C2410_UCON);
-
- printk("ucons: %08lx, %08lx, %08lx\n", ucon0, ucon1, ucon2);
-
- ucon0 &= S3C2440_UCON0_DIVMASK;
- ucon1 &= S3C2440_UCON1_DIVMASK;
- ucon2 &= S3C2440_UCON2_DIVMASK;
-
- if (ucon0 != 0) {
- clk->divisor = ucon0 >> S3C2440_UCON_DIVSHIFT;
- clk->divisor += 6;
- } else if (ucon1 != 0) {
- clk->divisor = ucon1 >> S3C2440_UCON_DIVSHIFT;
- clk->divisor += 21;
- } else if (ucon2 != 0) {
- clk->divisor = ucon2 >> S3C2440_UCON_DIVSHIFT;
- clk->divisor += 36;
- } else {
- /* manual calims 44, seems to be 9 */
- clk->divisor = 9;
- }
-
- clk->name = "fclk";
- break;
- }
-
- return 0;
-}
-
-static int s3c2440_serial_resetport(struct uart_port *port,
- struct s3c2410_uartcfg *cfg)
-{
- unsigned long ucon = rd_regl(port, S3C2410_UCON);
-
- dbg("s3c2440_serial_resetport: port=%p (%08lx), cfg=%p\n",
- port, port->mapbase, cfg);
-
- /* ensure we don't change the clock settings... */
-
- ucon &= (S3C2440_UCON0_DIVMASK | (3<<10));
-
- wr_regl(port, S3C2410_UCON, ucon | cfg->ucon);
- wr_regl(port, S3C2410_ULCON, cfg->ulcon);
-
- /* reset both fifos */
-
- wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH);
- wr_regl(port, S3C2410_UFCON, cfg->ufcon);
-
- return 0;
-}
-
-static struct s3c24xx_uart_info s3c2440_uart_inf = {
- .name = "Samsung S3C2440 UART",
- .type = PORT_S3C2440,
- .fifosize = 64,
- .rx_fifomask = S3C2440_UFSTAT_RXMASK,
- .rx_fifoshift = S3C2440_UFSTAT_RXSHIFT,
- .rx_fifofull = S3C2440_UFSTAT_RXFULL,
- .tx_fifofull = S3C2440_UFSTAT_TXFULL,
- .tx_fifomask = S3C2440_UFSTAT_TXMASK,
- .tx_fifoshift = S3C2440_UFSTAT_TXSHIFT,
- .get_clksrc = s3c2440_serial_getsource,
- .set_clksrc = s3c2440_serial_setsource,
- .reset_port = s3c2440_serial_resetport,
-};
-
-/* device management */
-
-static int s3c2440_serial_probe(struct platform_device *dev)
-{
- dbg("s3c2440_serial_probe: dev=%p\n", dev);
- return s3c24xx_serial_probe(dev, &s3c2440_uart_inf);
-}
-
-static struct platform_driver s3c2440_serial_driver = {
- .probe = s3c2440_serial_probe,
- .remove = __devexit_p(s3c24xx_serial_remove),
- .driver = {
- .name = "s3c2440-uart",
- .owner = THIS_MODULE,
- },
-};
-
-static int __init s3c2440_serial_init(void)
-{
- return s3c24xx_serial_init(&s3c2440_serial_driver, &s3c2440_uart_inf);
-}
-
-static void __exit s3c2440_serial_exit(void)
-{
- platform_driver_unregister(&s3c2440_serial_driver);
-}
-
-module_init(s3c2440_serial_init);
-module_exit(s3c2440_serial_exit);
-
-MODULE_DESCRIPTION("Samsung S3C2440,S3C2442 SoC Serial port driver");
-MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
-MODULE_LICENSE("GPL v2");
-MODULE_ALIAS("platform:s3c2440-uart");
diff --git a/drivers/tty/serial/s3c6400.c b/drivers/tty/serial/s3c6400.c
deleted file mode 100644
index e2f6913d84d..00000000000
--- a/drivers/tty/serial/s3c6400.c
+++ /dev/null
@@ -1,149 +0,0 @@
-/*
- * Driver for Samsung S3C6400 and S3C6410 SoC onboard UARTs.
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/module.h>
-#include <linux/ioport.h>
-#include <linux/io.h>
-#include <linux/platform_device.h>
-#include <linux/init.h>
-#include <linux/serial_core.h>
-#include <linux/serial.h>
-
-#include <asm/irq.h>
-#include <mach/hardware.h>
-
-#include <plat/regs-serial.h>
-
-#include "samsung.h"
-
-static int s3c6400_serial_setsource(struct uart_port *port,
- struct s3c24xx_uart_clksrc *clk)
-{
- unsigned long ucon = rd_regl(port, S3C2410_UCON);
-
- if (strcmp(clk->name, "uclk0") == 0) {
- ucon &= ~S3C6400_UCON_CLKMASK;
- ucon |= S3C6400_UCON_UCLK0;
- } else if (strcmp(clk->name, "uclk1") == 0)
- ucon |= S3C6400_UCON_UCLK1;
- else if (strcmp(clk->name, "pclk") == 0) {
- /* See notes about transitioning from UCLK to PCLK */
- ucon &= ~S3C6400_UCON_UCLK0;
- } else {
- printk(KERN_ERR "unknown clock source %s\n", clk->name);
- return -EINVAL;
- }
-
- wr_regl(port, S3C2410_UCON, ucon);
- return 0;
-}
-
-
-static int s3c6400_serial_getsource(struct uart_port *port,
- struct s3c24xx_uart_clksrc *clk)
-{
- u32 ucon = rd_regl(port, S3C2410_UCON);
-
- clk->divisor = 1;
-
- switch (ucon & S3C6400_UCON_CLKMASK) {
- case S3C6400_UCON_UCLK0:
- clk->name = "uclk0";
- break;
-
- case S3C6400_UCON_UCLK1:
- clk->name = "uclk1";
- break;
-
- case S3C6400_UCON_PCLK:
- case S3C6400_UCON_PCLK2:
- clk->name = "pclk";
- break;
- }
-
- return 0;
-}
-
-static int s3c6400_serial_resetport(struct uart_port *port,
- struct s3c2410_uartcfg *cfg)
-{
- unsigned long ucon = rd_regl(port, S3C2410_UCON);
-
- dbg("s3c6400_serial_resetport: port=%p (%08lx), cfg=%p\n",
- port, port->mapbase, cfg);
-
- /* ensure we don't change the clock settings... */
-
- ucon &= S3C6400_UCON_CLKMASK;
-
- wr_regl(port, S3C2410_UCON, ucon | cfg->ucon);
- wr_regl(port, S3C2410_ULCON, cfg->ulcon);
-
- /* reset both fifos */
-
- wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH);
- wr_regl(port, S3C2410_UFCON, cfg->ufcon);
-
- return 0;
-}
-
-static struct s3c24xx_uart_info s3c6400_uart_inf = {
- .name = "Samsung S3C6400 UART",
- .type = PORT_S3C6400,
- .fifosize = 64,
- .has_divslot = 1,
- .rx_fifomask = S3C2440_UFSTAT_RXMASK,
- .rx_fifoshift = S3C2440_UFSTAT_RXSHIFT,
- .rx_fifofull = S3C2440_UFSTAT_RXFULL,
- .tx_fifofull = S3C2440_UFSTAT_TXFULL,
- .tx_fifomask = S3C2440_UFSTAT_TXMASK,
- .tx_fifoshift = S3C2440_UFSTAT_TXSHIFT,
- .get_clksrc = s3c6400_serial_getsource,
- .set_clksrc = s3c6400_serial_setsource,
- .reset_port = s3c6400_serial_resetport,
-};
-
-/* device management */
-
-static int s3c6400_serial_probe(struct platform_device *dev)
-{
- dbg("s3c6400_serial_probe: dev=%p\n", dev);
- return s3c24xx_serial_probe(dev, &s3c6400_uart_inf);
-}
-
-static struct platform_driver s3c6400_serial_driver = {
- .probe = s3c6400_serial_probe,
- .remove = __devexit_p(s3c24xx_serial_remove),
- .driver = {
- .name = "s3c6400-uart",
- .owner = THIS_MODULE,
- },
-};
-
-static int __init s3c6400_serial_init(void)
-{
- return s3c24xx_serial_init(&s3c6400_serial_driver, &s3c6400_uart_inf);
-}
-
-static void __exit s3c6400_serial_exit(void)
-{
- platform_driver_unregister(&s3c6400_serial_driver);
-}
-
-module_init(s3c6400_serial_init);
-module_exit(s3c6400_serial_exit);
-
-MODULE_DESCRIPTION("Samsung S3C6400,S3C6410 SoC Serial port driver");
-MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
-MODULE_LICENSE("GPL v2");
-MODULE_ALIAS("platform:s3c6400-uart");
diff --git a/drivers/tty/serial/s5pv210.c b/drivers/tty/serial/s5pv210.c
deleted file mode 100644
index 8b0b888a1b7..00000000000
--- a/drivers/tty/serial/s5pv210.c
+++ /dev/null
@@ -1,158 +0,0 @@
-/*
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * Based on drivers/serial/s3c6400.c
- *
- * Driver for Samsung S5PV210 SoC UARTs.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/module.h>
-#include <linux/ioport.h>
-#include <linux/io.h>
-#include <linux/platform_device.h>
-#include <linux/init.h>
-#include <linux/serial_core.h>
-#include <linux/serial.h>
-#include <linux/delay.h>
-
-#include <asm/irq.h>
-#include <mach/hardware.h>
-#include <plat/regs-serial.h>
-#include "samsung.h"
-
-static int s5pv210_serial_setsource(struct uart_port *port,
- struct s3c24xx_uart_clksrc *clk)
-{
- struct s3c2410_uartcfg *cfg = port->dev->platform_data;
- unsigned long ucon = rd_regl(port, S3C2410_UCON);
-
- if (cfg->flags & NO_NEED_CHECK_CLKSRC)
- return 0;
-
- if (strcmp(clk->name, "pclk") == 0)
- ucon &= ~S5PV210_UCON_CLKMASK;
- else if (strcmp(clk->name, "uclk1") == 0)
- ucon |= S5PV210_UCON_CLKMASK;
- else {
- printk(KERN_ERR "unknown clock source %s\n", clk->name);
- return -EINVAL;
- }
-
- wr_regl(port, S3C2410_UCON, ucon);
- return 0;
-}
-
-
-static int s5pv210_serial_getsource(struct uart_port *port,
- struct s3c24xx_uart_clksrc *clk)
-{
- struct s3c2410_uartcfg *cfg = port->dev->platform_data;
- u32 ucon = rd_regl(port, S3C2410_UCON);
-
- clk->divisor = 1;
-
- if (cfg->flags & NO_NEED_CHECK_CLKSRC)
- return 0;
-
- switch (ucon & S5PV210_UCON_CLKMASK) {
- case S5PV210_UCON_PCLK:
- clk->name = "pclk";
- break;
- case S5PV210_UCON_UCLK:
- clk->name = "uclk1";
- break;
- }
-
- return 0;
-}
-
-static int s5pv210_serial_resetport(struct uart_port *port,
- struct s3c2410_uartcfg *cfg)
-{
- unsigned long ucon = rd_regl(port, S3C2410_UCON);
-
- ucon &= S5PV210_UCON_CLKMASK;
- wr_regl(port, S3C2410_UCON, ucon | cfg->ucon);
- wr_regl(port, S3C2410_ULCON, cfg->ulcon);
-
- /* reset both fifos */
- wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH);
- wr_regl(port, S3C2410_UFCON, cfg->ufcon);
-
- /* It is need to delay When reset FIFO register */
- udelay(1);
-
- return 0;
-}
-
-#define S5PV210_UART_DEFAULT_INFO(fifo_size) \
- .name = "Samsung S5PV210 UART0", \
- .type = PORT_S3C6400, \
- .fifosize = fifo_size, \
- .has_divslot = 1, \
- .rx_fifomask = S5PV210_UFSTAT_RXMASK, \
- .rx_fifoshift = S5PV210_UFSTAT_RXSHIFT, \
- .rx_fifofull = S5PV210_UFSTAT_RXFULL, \
- .tx_fifofull = S5PV210_UFSTAT_TXFULL, \
- .tx_fifomask = S5PV210_UFSTAT_TXMASK, \
- .tx_fifoshift = S5PV210_UFSTAT_TXSHIFT, \
- .get_clksrc = s5pv210_serial_getsource, \
- .set_clksrc = s5pv210_serial_setsource, \
- .reset_port = s5pv210_serial_resetport
-
-static struct s3c24xx_uart_info s5p_port_fifo256 = {
- S5PV210_UART_DEFAULT_INFO(256),
-};
-
-static struct s3c24xx_uart_info s5p_port_fifo64 = {
- S5PV210_UART_DEFAULT_INFO(64),
-};
-
-static struct s3c24xx_uart_info s5p_port_fifo16 = {
- S5PV210_UART_DEFAULT_INFO(16),
-};
-
-static struct s3c24xx_uart_info *s5p_uart_inf[] = {
- [0] = &s5p_port_fifo256,
- [1] = &s5p_port_fifo64,
- [2] = &s5p_port_fifo16,
- [3] = &s5p_port_fifo16,
-};
-
-/* device management */
-static int s5p_serial_probe(struct platform_device *pdev)
-{
- return s3c24xx_serial_probe(pdev, s5p_uart_inf[pdev->id]);
-}
-
-static struct platform_driver s5p_serial_driver = {
- .probe = s5p_serial_probe,
- .remove = __devexit_p(s3c24xx_serial_remove),
- .driver = {
- .name = "s5pv210-uart",
- .owner = THIS_MODULE,
- },
-};
-
-static int __init s5p_serial_init(void)
-{
- return s3c24xx_serial_init(&s5p_serial_driver, *s5p_uart_inf);
-}
-
-static void __exit s5p_serial_exit(void)
-{
- platform_driver_unregister(&s5p_serial_driver);
-}
-
-module_init(s5p_serial_init);
-module_exit(s5p_serial_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:s5pv210-uart");
-MODULE_DESCRIPTION("Samsung S5PV210 UART Driver support");
-MODULE_AUTHOR("Thomas Abraham <thomas.ab@samsung.com>");
diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c
index b31f1c3a2c4..f96f37b5fec 100644
--- a/drivers/tty/serial/samsung.c
+++ b/drivers/tty/serial/samsung.c
@@ -42,6 +42,7 @@
#include <linux/delay.h>
#include <linux/clk.h>
#include <linux/cpufreq.h>
+#include <linux/of.h>
#include <asm/irq.h>
@@ -49,6 +50,7 @@
#include <mach/map.h>
#include <plat/regs-serial.h>
+#include <plat/clock.h>
#include "samsung.h"
@@ -190,10 +192,13 @@ static inline struct s3c24xx_uart_info *s3c24xx_port_to_info(struct uart_port *p
static inline struct s3c2410_uartcfg *s3c24xx_port_to_cfg(struct uart_port *port)
{
+ struct s3c24xx_uart_port *ourport;
+
if (port->dev == NULL)
return NULL;
- return (struct s3c2410_uartcfg *)port->dev->platform_data;
+ ourport = container_of(port, struct s3c24xx_uart_port, port);
+ return ourport->cfg;
}
static int s3c24xx_serial_rx_fifocnt(struct s3c24xx_uart_port *ourport,
@@ -202,7 +207,7 @@ static int s3c24xx_serial_rx_fifocnt(struct s3c24xx_uart_port *ourport,
struct s3c24xx_uart_info *info = ourport->info;
if (ufstat & info->rx_fifofull)
- return info->fifosize;
+ return ourport->port.fifosize;
return (ufstat & info->rx_fifomask) >> info->rx_fifoshift;
}
@@ -555,154 +560,98 @@ static void s3c24xx_serial_pm(struct uart_port *port, unsigned int level,
*
*/
+#define MAX_CLK_NAME_LENGTH 15
-#define MAX_CLKS (8)
-
-static struct s3c24xx_uart_clksrc tmp_clksrc = {
- .name = "pclk",
- .min_baud = 0,
- .max_baud = 0,
- .divisor = 1,
-};
-
-static inline int
-s3c24xx_serial_getsource(struct uart_port *port, struct s3c24xx_uart_clksrc *c)
+static inline int s3c24xx_serial_getsource(struct uart_port *port)
{
struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
+ unsigned int ucon;
- return (info->get_clksrc)(port, c);
-}
-
-static inline int
-s3c24xx_serial_setsource(struct uart_port *port, struct s3c24xx_uart_clksrc *c)
-{
- struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
+ if (info->num_clks == 1)
+ return 0;
- return (info->set_clksrc)(port, c);
+ ucon = rd_regl(port, S3C2410_UCON);
+ ucon &= info->clksel_mask;
+ return ucon >> info->clksel_shift;
}
-struct baud_calc {
- struct s3c24xx_uart_clksrc *clksrc;
- unsigned int calc;
- unsigned int divslot;
- unsigned int quot;
- struct clk *src;
-};
-
-static int s3c24xx_serial_calcbaud(struct baud_calc *calc,
- struct uart_port *port,
- struct s3c24xx_uart_clksrc *clksrc,
- unsigned int baud)
+static void s3c24xx_serial_setsource(struct uart_port *port,
+ unsigned int clk_sel)
{
- struct s3c24xx_uart_port *ourport = to_ourport(port);
- unsigned long rate;
-
- calc->src = clk_get(port->dev, clksrc->name);
- if (calc->src == NULL || IS_ERR(calc->src))
- return 0;
-
- rate = clk_get_rate(calc->src);
- rate /= clksrc->divisor;
+ struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
+ unsigned int ucon;
- calc->clksrc = clksrc;
+ if (info->num_clks == 1)
+ return;
- if (ourport->info->has_divslot) {
- unsigned long div = rate / baud;
-
- /* The UDIVSLOT register on the newer UARTs allows us to
- * get a divisor adjustment of 1/16th on the baud clock.
- *
- * We don't keep the UDIVSLOT value (the 16ths we calculated
- * by not multiplying the baud by 16) as it is easy enough
- * to recalculate.
- */
-
- calc->quot = div / 16;
- calc->calc = rate / div;
- } else {
- calc->quot = (rate + (8 * baud)) / (16 * baud);
- calc->calc = (rate / (calc->quot * 16));
- }
+ ucon = rd_regl(port, S3C2410_UCON);
+ if ((ucon & info->clksel_mask) >> info->clksel_shift == clk_sel)
+ return;
- calc->quot--;
- return 1;
+ ucon &= ~info->clksel_mask;
+ ucon |= clk_sel << info->clksel_shift;
+ wr_regl(port, S3C2410_UCON, ucon);
}
-static unsigned int s3c24xx_serial_getclk(struct uart_port *port,
- struct s3c24xx_uart_clksrc **clksrc,
- struct clk **clk,
- unsigned int baud)
+static unsigned int s3c24xx_serial_getclk(struct s3c24xx_uart_port *ourport,
+ unsigned int req_baud, struct clk **best_clk,
+ unsigned int *clk_num)
{
- struct s3c2410_uartcfg *cfg = s3c24xx_port_to_cfg(port);
- struct s3c24xx_uart_clksrc *clkp;
- struct baud_calc res[MAX_CLKS];
- struct baud_calc *resptr, *best, *sptr;
- int i;
-
- clkp = cfg->clocks;
- best = NULL;
-
- if (cfg->clocks_size < 2) {
- if (cfg->clocks_size == 0)
- clkp = &tmp_clksrc;
-
- /* check to see if we're sourcing fclk, and if so we're
- * going to have to update the clock source
- */
-
- if (strcmp(clkp->name, "fclk") == 0) {
- struct s3c24xx_uart_clksrc src;
-
- s3c24xx_serial_getsource(port, &src);
-
- /* check that the port already using fclk, and if
- * not, then re-select fclk
+ struct s3c24xx_uart_info *info = ourport->info;
+ struct clk *clk;
+ unsigned long rate;
+ unsigned int cnt, baud, quot, clk_sel, best_quot = 0;
+ char clkname[MAX_CLK_NAME_LENGTH];
+ int calc_deviation, deviation = (1 << 30) - 1;
+
+ *best_clk = NULL;
+ clk_sel = (ourport->cfg->clk_sel) ? ourport->cfg->clk_sel :
+ ourport->info->def_clk_sel;
+ for (cnt = 0; cnt < info->num_clks; cnt++) {
+ if (!(clk_sel & (1 << cnt)))
+ continue;
+
+ sprintf(clkname, "clk_uart_baud%d", cnt);
+ clk = clk_get(ourport->port.dev, clkname);
+ if (IS_ERR_OR_NULL(clk))
+ continue;
+
+ rate = clk_get_rate(clk);
+ if (!rate)
+ continue;
+
+ if (ourport->info->has_divslot) {
+ unsigned long div = rate / req_baud;
+
+ /* The UDIVSLOT register on the newer UARTs allows us to
+ * get a divisor adjustment of 1/16th on the baud clock.
+ *
+ * We don't keep the UDIVSLOT value (the 16ths we
+ * calculated by not multiplying the baud by 16) as it
+ * is easy enough to recalculate.
*/
- if (strcmp(src.name, clkp->name) == 0) {
- s3c24xx_serial_setsource(port, clkp);
- s3c24xx_serial_getsource(port, &src);
- }
-
- clkp->divisor = src.divisor;
- }
-
- s3c24xx_serial_calcbaud(res, port, clkp, baud);
- best = res;
- resptr = best + 1;
- } else {
- resptr = res;
-
- for (i = 0; i < cfg->clocks_size; i++, clkp++) {
- if (s3c24xx_serial_calcbaud(resptr, port, clkp, baud))
- resptr++;
+ quot = div / 16;
+ baud = rate / div;
+ } else {
+ quot = (rate + (8 * req_baud)) / (16 * req_baud);
+ baud = rate / (quot * 16);
}
- }
-
- /* ok, we now need to select the best clock we found */
-
- if (!best) {
- unsigned int deviation = (1<<30)|((1<<30)-1);
- int calc_deviation;
+ quot--;
- for (sptr = res; sptr < resptr; sptr++) {
- calc_deviation = baud - sptr->calc;
- if (calc_deviation < 0)
- calc_deviation = -calc_deviation;
+ calc_deviation = req_baud - baud;
+ if (calc_deviation < 0)
+ calc_deviation = -calc_deviation;
- if (calc_deviation < deviation) {
- best = sptr;
- deviation = calc_deviation;
- }
+ if (calc_deviation < deviation) {
+ *best_clk = clk;
+ best_quot = quot;
+ *clk_num = cnt;
+ deviation = calc_deviation;
}
}
- /* store results to pass back */
-
- *clksrc = best->clksrc;
- *clk = best->src;
-
- return best->quot;
+ return best_quot;
}
/* udivslot_table[]
@@ -735,10 +684,9 @@ static void s3c24xx_serial_set_termios(struct uart_port *port,
{
struct s3c2410_uartcfg *cfg = s3c24xx_port_to_cfg(port);
struct s3c24xx_uart_port *ourport = to_ourport(port);
- struct s3c24xx_uart_clksrc *clksrc = NULL;
struct clk *clk = NULL;
unsigned long flags;
- unsigned int baud, quot;
+ unsigned int baud, quot, clk_sel = 0;
unsigned int ulcon;
unsigned int umcon;
unsigned int udivslot = 0;
@@ -754,17 +702,16 @@ static void s3c24xx_serial_set_termios(struct uart_port *port,
*/
baud = uart_get_baud_rate(port, termios, old, 0, 115200*8);
-
+ quot = s3c24xx_serial_getclk(ourport, baud, &clk, &clk_sel);
if (baud == 38400 && (port->flags & UPF_SPD_MASK) == UPF_SPD_CUST)
quot = port->custom_divisor;
- else
- quot = s3c24xx_serial_getclk(port, &clksrc, &clk, baud);
+ if (!clk)
+ return;
/* check to see if we need to change clock source */
- if (ourport->clksrc != clksrc || ourport->baudclk != clk) {
- dbg("selecting clock %p\n", clk);
- s3c24xx_serial_setsource(port, clksrc);
+ if (ourport->baudclk != clk) {
+ s3c24xx_serial_setsource(port, clk_sel);
if (ourport->baudclk != NULL && !IS_ERR(ourport->baudclk)) {
clk_disable(ourport->baudclk);
@@ -773,7 +720,6 @@ static void s3c24xx_serial_set_termios(struct uart_port *port,
clk_enable(clk);
- ourport->clksrc = clksrc;
ourport->baudclk = clk;
ourport->baudclk_rate = clk ? clk_get_rate(clk) : 0;
}
@@ -1020,16 +966,29 @@ static struct s3c24xx_uart_port s3c24xx_serial_ports[CONFIG_SERIAL_SAMSUNG_UARTS
/* s3c24xx_serial_resetport
*
- * wrapper to call the specific reset for this port (reset the fifos
- * and the settings)
+ * reset the fifos and other the settings.
*/
-static inline int s3c24xx_serial_resetport(struct uart_port *port,
- struct s3c2410_uartcfg *cfg)
+static void s3c24xx_serial_resetport(struct uart_port *port,
+ struct s3c2410_uartcfg *cfg)
{
struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
+ unsigned long ucon = rd_regl(port, S3C2410_UCON);
+ unsigned int ucon_mask;
+
+ ucon_mask = info->clksel_mask;
+ if (info->type == PORT_S3C2440)
+ ucon_mask |= S3C2440_UCON0_DIVMASK;
- return (info->reset_port)(port, cfg);
+ ucon &= ucon_mask;
+ wr_regl(port, S3C2410_UCON, ucon | cfg->ucon);
+
+ /* reset both fifos */
+ wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH);
+ wr_regl(port, S3C2410_UFCON, cfg->ufcon);
+
+ /* some delay is required after fifo reset */
+ udelay(1);
}
@@ -1121,11 +1080,10 @@ static inline void s3c24xx_serial_cpufreq_deregister(struct s3c24xx_uart_port *p
*/
static int s3c24xx_serial_init_port(struct s3c24xx_uart_port *ourport,
- struct s3c24xx_uart_info *info,
struct platform_device *platdev)
{
struct uart_port *port = &ourport->port;
- struct s3c2410_uartcfg *cfg;
+ struct s3c2410_uartcfg *cfg = ourport->cfg;
struct resource *res;
int ret;
@@ -1134,30 +1092,16 @@ static int s3c24xx_serial_init_port(struct s3c24xx_uart_port *ourport,
if (platdev == NULL)
return -ENODEV;
- cfg = s3c24xx_dev_to_cfg(&platdev->dev);
-
if (port->mapbase != 0)
return 0;
- if (cfg->hwport > CONFIG_SERIAL_SAMSUNG_UARTS) {
- printk(KERN_ERR "%s: port %d bigger than %d\n", __func__,
- cfg->hwport, CONFIG_SERIAL_SAMSUNG_UARTS);
- return -ERANGE;
- }
-
/* setup info for port */
port->dev = &platdev->dev;
- ourport->info = info;
/* Startup sequence is different for s3c64xx and higher SoC's */
if (s3c24xx_serial_has_interrupt_mask(port))
s3c24xx_serial_ops.startup = s3c64xx_serial_startup;
- /* copy the info in from provided structure */
- ourport->port.fifosize = info->fifosize;
-
- dbg("s3c24xx_serial_init_port: %p (hw %d)...\n", port, cfg->hwport);
-
port->uartclk = 1;
if (cfg->uart_flags & UPF_CONS_FLOW) {
@@ -1215,43 +1159,74 @@ static ssize_t s3c24xx_serial_show_clksrc(struct device *dev,
struct uart_port *port = s3c24xx_dev_to_port(dev);
struct s3c24xx_uart_port *ourport = to_ourport(port);
- return snprintf(buf, PAGE_SIZE, "* %s\n", ourport->clksrc->name);
+ return snprintf(buf, PAGE_SIZE, "* %s\n", ourport->baudclk->name);
}
static DEVICE_ATTR(clock_source, S_IRUGO, s3c24xx_serial_show_clksrc, NULL);
+
/* Device driver serial port probe */
+static const struct of_device_id s3c24xx_uart_dt_match[];
static int probe_index;
-int s3c24xx_serial_probe(struct platform_device *dev,
- struct s3c24xx_uart_info *info)
+static inline struct s3c24xx_serial_drv_data *s3c24xx_get_driver_data(
+ struct platform_device *pdev)
+{
+#ifdef CONFIG_OF
+ if (pdev->dev.of_node) {
+ const struct of_device_id *match;
+ match = of_match_node(s3c24xx_uart_dt_match, pdev->dev.of_node);
+ return (struct s3c24xx_serial_drv_data *)match->data;
+ }
+#endif
+ return (struct s3c24xx_serial_drv_data *)
+ platform_get_device_id(pdev)->driver_data;
+}
+
+static int s3c24xx_serial_probe(struct platform_device *pdev)
{
struct s3c24xx_uart_port *ourport;
int ret;
- dbg("s3c24xx_serial_probe(%p, %p) %d\n", dev, info, probe_index);
+ dbg("s3c24xx_serial_probe(%p) %d\n", pdev, probe_index);
ourport = &s3c24xx_serial_ports[probe_index];
+
+ ourport->drv_data = s3c24xx_get_driver_data(pdev);
+ if (!ourport->drv_data) {
+ dev_err(&pdev->dev, "could not find driver data\n");
+ return -ENODEV;
+ }
+
+ ourport->info = ourport->drv_data->info;
+ ourport->cfg = (pdev->dev.platform_data) ?
+ (struct s3c2410_uartcfg *)pdev->dev.platform_data :
+ ourport->drv_data->def_cfg;
+
+ ourport->port.fifosize = (ourport->info->fifosize) ?
+ ourport->info->fifosize :
+ ourport->drv_data->fifosize[probe_index];
+
probe_index++;
dbg("%s: initialising port %p...\n", __func__, ourport);
- ret = s3c24xx_serial_init_port(ourport, info, dev);
+ ret = s3c24xx_serial_init_port(ourport, pdev);
if (ret < 0)
goto probe_err;
dbg("%s: adding port\n", __func__);
uart_add_one_port(&s3c24xx_uart_drv, &ourport->port);
- platform_set_drvdata(dev, &ourport->port);
+ platform_set_drvdata(pdev, &ourport->port);
- ret = device_create_file(&dev->dev, &dev_attr_clock_source);
+ ret = device_create_file(&pdev->dev, &dev_attr_clock_source);
if (ret < 0)
- printk(KERN_ERR "%s: failed to add clksrc attr.\n", __func__);
+ dev_err(&pdev->dev, "failed to add clock source attr.\n");
ret = s3c24xx_serial_cpufreq_register(ourport);
if (ret < 0)
- dev_err(&dev->dev, "failed to add cpufreq notifier\n");
+ dev_err(&pdev->dev, "failed to add cpufreq notifier\n");
return 0;
@@ -1259,9 +1234,7 @@ int s3c24xx_serial_probe(struct platform_device *dev,
return ret;
}
-EXPORT_SYMBOL_GPL(s3c24xx_serial_probe);
-
-int __devexit s3c24xx_serial_remove(struct platform_device *dev)
+static int __devexit s3c24xx_serial_remove(struct platform_device *dev)
{
struct uart_port *port = s3c24xx_dev_to_port(&dev->dev);
@@ -1274,8 +1247,6 @@ int __devexit s3c24xx_serial_remove(struct platform_device *dev)
return 0;
}
-EXPORT_SYMBOL_GPL(s3c24xx_serial_remove);
-
/* UART power management code */
#ifdef CONFIG_PM_SLEEP
static int s3c24xx_serial_suspend(struct device *dev)
@@ -1315,41 +1286,6 @@ static const struct dev_pm_ops s3c24xx_serial_pm_ops = {
#define SERIAL_SAMSUNG_PM_OPS NULL
#endif /* CONFIG_PM_SLEEP */
-int s3c24xx_serial_init(struct platform_driver *drv,
- struct s3c24xx_uart_info *info)
-{
- dbg("s3c24xx_serial_init(%p,%p)\n", drv, info);
-
- drv->driver.pm = SERIAL_SAMSUNG_PM_OPS;
-
- return platform_driver_register(drv);
-}
-
-EXPORT_SYMBOL_GPL(s3c24xx_serial_init);
-
-/* module initialisation code */
-
-static int __init s3c24xx_serial_modinit(void)
-{
- int ret;
-
- ret = uart_register_driver(&s3c24xx_uart_drv);
- if (ret < 0) {
- printk(KERN_ERR "failed to register UART driver\n");
- return -1;
- }
-
- return 0;
-}
-
-static void __exit s3c24xx_serial_modexit(void)
-{
- uart_unregister_driver(&s3c24xx_uart_drv);
-}
-
-module_init(s3c24xx_serial_modinit);
-module_exit(s3c24xx_serial_modexit);
-
/* Console code */
#ifdef CONFIG_SERIAL_SAMSUNG_CONSOLE
@@ -1395,12 +1331,13 @@ static void __init
s3c24xx_serial_get_options(struct uart_port *port, int *baud,
int *parity, int *bits)
{
- struct s3c24xx_uart_clksrc clksrc;
struct clk *clk;
unsigned int ulcon;
unsigned int ucon;
unsigned int ubrdiv;
unsigned long rate;
+ unsigned int clk_sel;
+ char clk_name[MAX_CLK_NAME_LENGTH];
ulcon = rd_regl(port, S3C2410_ULCON);
ucon = rd_regl(port, S3C2410_UCON);
@@ -1445,44 +1382,21 @@ s3c24xx_serial_get_options(struct uart_port *port, int *baud,
/* now calculate the baud rate */
- s3c24xx_serial_getsource(port, &clksrc);
+ clk_sel = s3c24xx_serial_getsource(port);
+ sprintf(clk_name, "clk_uart_baud%d", clk_sel);
- clk = clk_get(port->dev, clksrc.name);
+ clk = clk_get(port->dev, clk_name);
if (!IS_ERR(clk) && clk != NULL)
- rate = clk_get_rate(clk) / clksrc.divisor;
+ rate = clk_get_rate(clk);
else
rate = 1;
-
*baud = rate / (16 * (ubrdiv + 1));
dbg("calculated baud %d\n", *baud);
}
}
-/* s3c24xx_serial_init_ports
- *
- * initialise the serial ports from the machine provided initialisation
- * data.
-*/
-
-static int s3c24xx_serial_init_ports(struct s3c24xx_uart_info **info)
-{
- struct s3c24xx_uart_port *ptr = s3c24xx_serial_ports;
- struct platform_device **platdev_ptr;
- int i;
-
- dbg("s3c24xx_serial_init_ports: initialising ports...\n");
-
- platdev_ptr = s3c24xx_uart_devs;
-
- for (i = 0; i < CONFIG_SERIAL_SAMSUNG_UARTS; i++, ptr++, platdev_ptr++) {
- s3c24xx_serial_init_port(ptr, info[i], *platdev_ptr);
- }
-
- return 0;
-}
-
static int __init
s3c24xx_serial_console_setup(struct console *co, char *options)
{
@@ -1526,11 +1440,6 @@ s3c24xx_serial_console_setup(struct console *co, char *options)
return uart_set_options(port, co, baud, parity, bits, flow);
}
-/* s3c24xx_serial_initconsole
- *
- * initialise the console from one of the uart drivers
-*/
-
static struct console s3c24xx_serial_console = {
.name = S3C24XX_SERIAL_NAME,
.device = uart_console_device,
@@ -1540,34 +1449,250 @@ static struct console s3c24xx_serial_console = {
.setup = s3c24xx_serial_console_setup,
.data = &s3c24xx_uart_drv,
};
+#endif /* CONFIG_SERIAL_SAMSUNG_CONSOLE */
-int s3c24xx_serial_initconsole(struct platform_driver *drv,
- struct s3c24xx_uart_info **info)
+#ifdef CONFIG_CPU_S3C2410
+static struct s3c24xx_serial_drv_data s3c2410_serial_drv_data = {
+ .info = &(struct s3c24xx_uart_info) {
+ .name = "Samsung S3C2410 UART",
+ .type = PORT_S3C2410,
+ .fifosize = 16,
+ .rx_fifomask = S3C2410_UFSTAT_RXMASK,
+ .rx_fifoshift = S3C2410_UFSTAT_RXSHIFT,
+ .rx_fifofull = S3C2410_UFSTAT_RXFULL,
+ .tx_fifofull = S3C2410_UFSTAT_TXFULL,
+ .tx_fifomask = S3C2410_UFSTAT_TXMASK,
+ .tx_fifoshift = S3C2410_UFSTAT_TXSHIFT,
+ .def_clk_sel = S3C2410_UCON_CLKSEL0,
+ .num_clks = 2,
+ .clksel_mask = S3C2410_UCON_CLKMASK,
+ .clksel_shift = S3C2410_UCON_CLKSHIFT,
+ },
+ .def_cfg = &(struct s3c2410_uartcfg) {
+ .ucon = S3C2410_UCON_DEFAULT,
+ .ufcon = S3C2410_UFCON_DEFAULT,
+ },
+};
+#define S3C2410_SERIAL_DRV_DATA ((kernel_ulong_t)&s3c2410_serial_drv_data)
+#else
+#define S3C2410_SERIAL_DRV_DATA (kernel_ulong_t)NULL
+#endif
-{
- struct platform_device *dev = s3c24xx_uart_devs[0];
+#ifdef CONFIG_CPU_S3C2412
+static struct s3c24xx_serial_drv_data s3c2412_serial_drv_data = {
+ .info = &(struct s3c24xx_uart_info) {
+ .name = "Samsung S3C2412 UART",
+ .type = PORT_S3C2412,
+ .fifosize = 64,
+ .has_divslot = 1,
+ .rx_fifomask = S3C2440_UFSTAT_RXMASK,
+ .rx_fifoshift = S3C2440_UFSTAT_RXSHIFT,
+ .rx_fifofull = S3C2440_UFSTAT_RXFULL,
+ .tx_fifofull = S3C2440_UFSTAT_TXFULL,
+ .tx_fifomask = S3C2440_UFSTAT_TXMASK,
+ .tx_fifoshift = S3C2440_UFSTAT_TXSHIFT,
+ .def_clk_sel = S3C2410_UCON_CLKSEL2,
+ .num_clks = 4,
+ .clksel_mask = S3C2412_UCON_CLKMASK,
+ .clksel_shift = S3C2412_UCON_CLKSHIFT,
+ },
+ .def_cfg = &(struct s3c2410_uartcfg) {
+ .ucon = S3C2410_UCON_DEFAULT,
+ .ufcon = S3C2410_UFCON_DEFAULT,
+ },
+};
+#define S3C2412_SERIAL_DRV_DATA ((kernel_ulong_t)&s3c2412_serial_drv_data)
+#else
+#define S3C2412_SERIAL_DRV_DATA (kernel_ulong_t)NULL
+#endif
- dbg("s3c24xx_serial_initconsole\n");
+#if defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2416) || \
+ defined(CONFIG_CPU_S3C2443)
+static struct s3c24xx_serial_drv_data s3c2440_serial_drv_data = {
+ .info = &(struct s3c24xx_uart_info) {
+ .name = "Samsung S3C2440 UART",
+ .type = PORT_S3C2440,
+ .fifosize = 64,
+ .has_divslot = 1,
+ .rx_fifomask = S3C2440_UFSTAT_RXMASK,
+ .rx_fifoshift = S3C2440_UFSTAT_RXSHIFT,
+ .rx_fifofull = S3C2440_UFSTAT_RXFULL,
+ .tx_fifofull = S3C2440_UFSTAT_TXFULL,
+ .tx_fifomask = S3C2440_UFSTAT_TXMASK,
+ .tx_fifoshift = S3C2440_UFSTAT_TXSHIFT,
+ .def_clk_sel = S3C2410_UCON_CLKSEL2,
+ .num_clks = 4,
+ .clksel_mask = S3C2412_UCON_CLKMASK,
+ .clksel_shift = S3C2412_UCON_CLKSHIFT,
+ },
+ .def_cfg = &(struct s3c2410_uartcfg) {
+ .ucon = S3C2410_UCON_DEFAULT,
+ .ufcon = S3C2410_UFCON_DEFAULT,
+ },
+};
+#define S3C2440_SERIAL_DRV_DATA ((kernel_ulong_t)&s3c2440_serial_drv_data)
+#else
+#define S3C2440_SERIAL_DRV_DATA (kernel_ulong_t)NULL
+#endif
- /* select driver based on the cpu */
+#if defined(CONFIG_CPU_S3C6400) || defined(CONFIG_CPU_S3C6410) || \
+ defined(CONFIG_CPU_S5P6440) || defined(CONFIG_CPU_S5P6450) || \
+ defined(CONFIG_CPU_S5PC100)
+static struct s3c24xx_serial_drv_data s3c6400_serial_drv_data = {
+ .info = &(struct s3c24xx_uart_info) {
+ .name = "Samsung S3C6400 UART",
+ .type = PORT_S3C6400,
+ .fifosize = 64,
+ .has_divslot = 1,
+ .rx_fifomask = S3C2440_UFSTAT_RXMASK,
+ .rx_fifoshift = S3C2440_UFSTAT_RXSHIFT,
+ .rx_fifofull = S3C2440_UFSTAT_RXFULL,
+ .tx_fifofull = S3C2440_UFSTAT_TXFULL,
+ .tx_fifomask = S3C2440_UFSTAT_TXMASK,
+ .tx_fifoshift = S3C2440_UFSTAT_TXSHIFT,
+ .def_clk_sel = S3C2410_UCON_CLKSEL2,
+ .num_clks = 4,
+ .clksel_mask = S3C6400_UCON_CLKMASK,
+ .clksel_shift = S3C6400_UCON_CLKSHIFT,
+ },
+ .def_cfg = &(struct s3c2410_uartcfg) {
+ .ucon = S3C2410_UCON_DEFAULT,
+ .ufcon = S3C2410_UFCON_DEFAULT,
+ },
+};
+#define S3C6400_SERIAL_DRV_DATA ((kernel_ulong_t)&s3c6400_serial_drv_data)
+#else
+#define S3C6400_SERIAL_DRV_DATA (kernel_ulong_t)NULL
+#endif
- if (dev == NULL) {
- printk(KERN_ERR "s3c24xx: no devices for console init\n");
- return 0;
- }
+#ifdef CONFIG_CPU_S5PV210
+static struct s3c24xx_serial_drv_data s5pv210_serial_drv_data = {
+ .info = &(struct s3c24xx_uart_info) {
+ .name = "Samsung S5PV210 UART",
+ .type = PORT_S3C6400,
+ .has_divslot = 1,
+ .rx_fifomask = S5PV210_UFSTAT_RXMASK,
+ .rx_fifoshift = S5PV210_UFSTAT_RXSHIFT,
+ .rx_fifofull = S5PV210_UFSTAT_RXFULL,
+ .tx_fifofull = S5PV210_UFSTAT_TXFULL,
+ .tx_fifomask = S5PV210_UFSTAT_TXMASK,
+ .tx_fifoshift = S5PV210_UFSTAT_TXSHIFT,
+ .def_clk_sel = S3C2410_UCON_CLKSEL0,
+ .num_clks = 2,
+ .clksel_mask = S5PV210_UCON_CLKMASK,
+ .clksel_shift = S5PV210_UCON_CLKSHIFT,
+ },
+ .def_cfg = &(struct s3c2410_uartcfg) {
+ .ucon = S5PV210_UCON_DEFAULT,
+ .ufcon = S5PV210_UFCON_DEFAULT,
+ },
+ .fifosize = { 256, 64, 16, 16 },
+};
+#define S5PV210_SERIAL_DRV_DATA ((kernel_ulong_t)&s5pv210_serial_drv_data)
+#else
+#define S5PV210_SERIAL_DRV_DATA (kernel_ulong_t)NULL
+#endif
- if (strcmp(dev->name, drv->driver.name) != 0)
- return 0;
+#ifdef CONFIG_CPU_EXYNOS4210
+static struct s3c24xx_serial_drv_data exynos4210_serial_drv_data = {
+ .info = &(struct s3c24xx_uart_info) {
+ .name = "Samsung Exynos4 UART",
+ .type = PORT_S3C6400,
+ .has_divslot = 1,
+ .rx_fifomask = S5PV210_UFSTAT_RXMASK,
+ .rx_fifoshift = S5PV210_UFSTAT_RXSHIFT,
+ .rx_fifofull = S5PV210_UFSTAT_RXFULL,
+ .tx_fifofull = S5PV210_UFSTAT_TXFULL,
+ .tx_fifomask = S5PV210_UFSTAT_TXMASK,
+ .tx_fifoshift = S5PV210_UFSTAT_TXSHIFT,
+ .def_clk_sel = S3C2410_UCON_CLKSEL0,
+ .num_clks = 1,
+ .clksel_mask = 0,
+ .clksel_shift = 0,
+ },
+ .def_cfg = &(struct s3c2410_uartcfg) {
+ .ucon = S5PV210_UCON_DEFAULT,
+ .ufcon = S5PV210_UFCON_DEFAULT,
+ .has_fracval = 1,
+ },
+ .fifosize = { 256, 64, 16, 16 },
+};
+#define EXYNOS4210_SERIAL_DRV_DATA ((kernel_ulong_t)&exynos4210_serial_drv_data)
+#else
+#define EXYNOS4210_SERIAL_DRV_DATA (kernel_ulong_t)NULL
+#endif
- s3c24xx_serial_console.data = &s3c24xx_uart_drv;
- s3c24xx_serial_init_ports(info);
+static struct platform_device_id s3c24xx_serial_driver_ids[] = {
+ {
+ .name = "s3c2410-uart",
+ .driver_data = S3C2410_SERIAL_DRV_DATA,
+ }, {
+ .name = "s3c2412-uart",
+ .driver_data = S3C2412_SERIAL_DRV_DATA,
+ }, {
+ .name = "s3c2440-uart",
+ .driver_data = S3C2440_SERIAL_DRV_DATA,
+ }, {
+ .name = "s3c6400-uart",
+ .driver_data = S3C6400_SERIAL_DRV_DATA,
+ }, {
+ .name = "s5pv210-uart",
+ .driver_data = S5PV210_SERIAL_DRV_DATA,
+ }, {
+ .name = "exynos4210-uart",
+ .driver_data = EXYNOS4210_SERIAL_DRV_DATA,
+ },
+ { },
+};
+MODULE_DEVICE_TABLE(platform, s3c24xx_serial_driver_ids);
- register_console(&s3c24xx_serial_console);
- return 0;
+#ifdef CONFIG_OF
+static const struct of_device_id s3c24xx_uart_dt_match[] = {
+ { .compatible = "samsung,exynos4210-uart",
+ .data = (void *)EXYNOS4210_SERIAL_DRV_DATA },
+ {},
+};
+MODULE_DEVICE_TABLE(of, s3c24xx_uart_dt_match);
+#else
+#define s3c24xx_uart_dt_match NULL
+#endif
+
+static struct platform_driver samsung_serial_driver = {
+ .probe = s3c24xx_serial_probe,
+ .remove = __devexit_p(s3c24xx_serial_remove),
+ .id_table = s3c24xx_serial_driver_ids,
+ .driver = {
+ .name = "samsung-uart",
+ .owner = THIS_MODULE,
+ .pm = SERIAL_SAMSUNG_PM_OPS,
+ .of_match_table = s3c24xx_uart_dt_match,
+ },
+};
+
+/* module initialisation code */
+
+static int __init s3c24xx_serial_modinit(void)
+{
+ int ret;
+
+ ret = uart_register_driver(&s3c24xx_uart_drv);
+ if (ret < 0) {
+ printk(KERN_ERR "failed to register UART driver\n");
+ return -1;
+ }
+
+ return platform_driver_register(&samsung_serial_driver);
}
-#endif /* CONFIG_SERIAL_SAMSUNG_CONSOLE */
+static void __exit s3c24xx_serial_modexit(void)
+{
+ uart_unregister_driver(&s3c24xx_uart_drv);
+}
+
+module_init(s3c24xx_serial_modinit);
+module_exit(s3c24xx_serial_modexit);
+MODULE_ALIAS("platform:samsung-uart");
MODULE_DESCRIPTION("Samsung SoC Serial port driver");
MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
MODULE_LICENSE("GPL v2");
diff --git a/drivers/tty/serial/samsung.h b/drivers/tty/serial/samsung.h
index 8e87b788e5c..1a4bca3e417 100644
--- a/drivers/tty/serial/samsung.h
+++ b/drivers/tty/serial/samsung.h
@@ -19,20 +19,25 @@ struct s3c24xx_uart_info {
unsigned long tx_fifomask;
unsigned long tx_fifoshift;
unsigned long tx_fifofull;
+ unsigned int def_clk_sel;
+ unsigned long num_clks;
+ unsigned long clksel_mask;
+ unsigned long clksel_shift;
/* uart port features */
unsigned int has_divslot:1;
- /* clock source control */
-
- int (*get_clksrc)(struct uart_port *, struct s3c24xx_uart_clksrc *clk);
- int (*set_clksrc)(struct uart_port *, struct s3c24xx_uart_clksrc *clk);
-
/* uart controls */
int (*reset_port)(struct uart_port *, struct s3c2410_uartcfg *);
};
+struct s3c24xx_serial_drv_data {
+ struct s3c24xx_uart_info *info;
+ struct s3c2410_uartcfg *def_cfg;
+ unsigned int fifosize[CONFIG_SERIAL_SAMSUNG_UARTS];
+};
+
struct s3c24xx_uart_port {
unsigned char rx_claimed;
unsigned char tx_claimed;
@@ -43,10 +48,13 @@ struct s3c24xx_uart_port {
unsigned int tx_irq;
struct s3c24xx_uart_info *info;
- struct s3c24xx_uart_clksrc *clksrc;
struct clk *clk;
struct clk *baudclk;
struct uart_port port;
+ struct s3c24xx_serial_drv_data *drv_data;
+
+ /* reference to platform data */
+ struct s3c2410_uartcfg *cfg;
#ifdef CONFIG_CPU_FREQ
struct notifier_block freq_transition;
@@ -56,7 +64,6 @@ struct s3c24xx_uart_port {
/* conversion functions */
#define s3c24xx_dev_to_port(__dev) (struct uart_port *)dev_get_drvdata(__dev)
-#define s3c24xx_dev_to_cfg(__dev) (struct s3c2410_uartcfg *)((__dev)->platform_data)
/* register access controls */
@@ -69,17 +76,6 @@ struct s3c24xx_uart_port {
#define wr_regb(port, reg, val) __raw_writeb(val, portaddr(port, reg))
#define wr_regl(port, reg, val) __raw_writel(val, portaddr(port, reg))
-extern int s3c24xx_serial_probe(struct platform_device *dev,
- struct s3c24xx_uart_info *uart);
-
-extern int __devexit s3c24xx_serial_remove(struct platform_device *dev);
-
-extern int s3c24xx_serial_initconsole(struct platform_driver *drv,
- struct s3c24xx_uart_info **uart);
-
-extern int s3c24xx_serial_init(struct platform_driver *drv,
- struct s3c24xx_uart_info *info);
-
#ifdef CONFIG_SERIAL_SAMSUNG_DEBUG
extern void printascii(const char *);
diff --git a/drivers/usb/host/ehci-tegra.c b/drivers/usb/host/ehci-tegra.c
index db9d1b4bfbd..dbc7fe8ca9e 100644
--- a/drivers/usb/host/ehci-tegra.c
+++ b/drivers/usb/host/ehci-tegra.c
@@ -21,7 +21,12 @@
#include <linux/platform_data/tegra_usb.h>
#include <linux/irq.h>
#include <linux/usb/otg.h>
+#include <linux/gpio.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
+
#include <mach/usb_phy.h>
+#include <mach/iomap.h>
#define TEGRA_USB_DMA_ALIGN 32
@@ -574,6 +579,35 @@ static const struct hc_driver tegra_ehci_hc_driver = {
.port_handed_over = ehci_port_handed_over,
};
+static int setup_vbus_gpio(struct platform_device *pdev)
+{
+ int err = 0;
+ int gpio;
+
+ if (!pdev->dev.of_node)
+ return 0;
+
+ gpio = of_get_named_gpio(pdev->dev.of_node, "nvidia,vbus-gpio", 0);
+ if (!gpio_is_valid(gpio))
+ return 0;
+
+ err = gpio_request(gpio, "vbus_gpio");
+ if (err) {
+ dev_err(&pdev->dev, "can't request vbus gpio %d", gpio);
+ return err;
+ }
+ err = gpio_direction_output(gpio, 1);
+ if (err) {
+ dev_err(&pdev->dev, "can't enable vbus\n");
+ return err;
+ }
+ gpio_set_value(gpio, 1);
+
+ return err;
+}
+
+static u64 tegra_ehci_dma_mask = DMA_BIT_MASK(32);
+
static int tegra_ehci_probe(struct platform_device *pdev)
{
struct resource *res;
@@ -590,6 +624,15 @@ static int tegra_ehci_probe(struct platform_device *pdev)
return -EINVAL;
}
+ /* Right now device-tree probed devices don't get dma_mask set.
+ * Since shared usb code relies on it, set it here for now.
+ * Once we have dma capability bindings this can go away.
+ */
+ if (!pdev->dev.dma_mask)
+ pdev->dev.dma_mask = &tegra_ehci_dma_mask;
+
+ setup_vbus_gpio(pdev);
+
tegra = kzalloc(sizeof(struct tegra_ehci_hcd), GFP_KERNEL);
if (!tegra)
return -ENOMEM;
@@ -640,6 +683,28 @@ static int tegra_ehci_probe(struct platform_device *pdev)
goto fail_io;
}
+ /* This is pretty ugly and needs to be fixed when we do only
+ * device-tree probing. Old code relies on the platform_device
+ * numbering that we lack for device-tree-instantiated devices.
+ */
+ if (instance < 0) {
+ switch (res->start) {
+ case TEGRA_USB_BASE:
+ instance = 0;
+ break;
+ case TEGRA_USB2_BASE:
+ instance = 1;
+ break;
+ case TEGRA_USB3_BASE:
+ instance = 2;
+ break;
+ default:
+ err = -ENODEV;
+ dev_err(&pdev->dev, "unknown usb instance\n");
+ goto fail_phy;
+ }
+ }
+
tegra->phy = tegra_usb_phy_open(instance, hcd->regs, pdata->phy_config,
TEGRA_USB_PHY_MODE_HOST);
if (IS_ERR(tegra->phy)) {
@@ -773,6 +838,11 @@ static void tegra_ehci_hcd_shutdown(struct platform_device *pdev)
hcd->driver->shutdown(hcd);
}
+static struct of_device_id tegra_ehci_of_match[] __devinitdata = {
+ { .compatible = "nvidia,tegra20-ehci", },
+ { },
+};
+
static struct platform_driver tegra_ehci_driver = {
.probe = tegra_ehci_probe,
.remove = tegra_ehci_remove,
@@ -783,5 +853,6 @@ static struct platform_driver tegra_ehci_driver = {
.shutdown = tegra_ehci_hcd_shutdown,
.driver = {
.name = "tegra-ehci",
+ .of_match_table = tegra_ehci_of_match,
}
};