diff options
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/leds/Kconfig | 13 | ||||
-rw-r--r-- | drivers/leds/Makefile | 1 | ||||
-rw-r--r-- | drivers/leds/leds-clevo-mail.c | 2 | ||||
-rw-r--r-- | drivers/leds/leds-cobalt-qube.c | 2 | ||||
-rw-r--r-- | drivers/leds/leds-cobalt-raq.c | 4 | ||||
-rw-r--r-- | drivers/leds/leds-gpio.c | 2 | ||||
-rw-r--r-- | drivers/leds/leds-pca9532.c | 12 | ||||
-rw-r--r-- | drivers/leds/leds-wm831x-status.c | 341 | ||||
-rw-r--r-- | drivers/leds/ledtrig-gpio.c | 32 | ||||
-rw-r--r-- | drivers/macintosh/via-pmu-led.c | 2 |
10 files changed, 380 insertions, 31 deletions
diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig index 7c8e7122aaa..e4f599f20e3 100644 --- a/drivers/leds/Kconfig +++ b/drivers/leds/Kconfig @@ -150,9 +150,9 @@ config LEDS_LP3944 tristate "LED Support for N.S. LP3944 (Fun Light) I2C chip" depends on LEDS_CLASS && I2C help - This option enables support for LEDs connected to the National - Semiconductor LP3944 Lighting Management Unit (LMU) also known as - Fun Light Chip. + This option enables support for LEDs connected to the National + Semiconductor LP3944 Lighting Management Unit (LMU) also known as + Fun Light Chip. To compile this driver as a module, choose M here: the module will be called leds-lp3944. @@ -195,6 +195,13 @@ config LEDS_PCA955X LED driver chips accessed via the I2C bus. Supported devices include PCA9550, PCA9551, PCA9552, and PCA9553. +config LEDS_WM831X_STATUS + tristate "LED support for status LEDs on WM831x PMICs" + depends on LEDS_CLASS && MFD_WM831X + help + This option enables support for the status LEDs of the WM831x + series of PMICs. + config LEDS_WM8350 tristate "LED Support for WM8350 AudioPlus PMIC" depends on LEDS_CLASS && MFD_WM8350 diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile index e8cdcf77a4c..46d72704d60 100644 --- a/drivers/leds/Makefile +++ b/drivers/leds/Makefile @@ -26,6 +26,7 @@ obj-$(CONFIG_LEDS_HP6XX) += leds-hp6xx.o obj-$(CONFIG_LEDS_FSG) += leds-fsg.o obj-$(CONFIG_LEDS_PCA955X) += leds-pca955x.o obj-$(CONFIG_LEDS_DA903X) += leds-da903x.o +obj-$(CONFIG_LEDS_WM831X_STATUS) += leds-wm831x-status.o obj-$(CONFIG_LEDS_WM8350) += leds-wm8350.o obj-$(CONFIG_LEDS_PWM) += leds-pwm.o diff --git a/drivers/leds/leds-clevo-mail.c b/drivers/leds/leds-clevo-mail.c index f2242db5401..a498135a4e8 100644 --- a/drivers/leds/leds-clevo-mail.c +++ b/drivers/leds/leds-clevo-mail.c @@ -153,7 +153,7 @@ static struct led_classdev clevo_mail_led = { .flags = LED_CORE_SUSPENDRESUME, }; -static int __init clevo_mail_led_probe(struct platform_device *pdev) +static int __devinit clevo_mail_led_probe(struct platform_device *pdev) { return led_classdev_register(&pdev->dev, &clevo_mail_led); } diff --git a/drivers/leds/leds-cobalt-qube.c b/drivers/leds/leds-cobalt-qube.c index 059aa2924b1..8816806accd 100644 --- a/drivers/leds/leds-cobalt-qube.c +++ b/drivers/leds/leds-cobalt-qube.c @@ -28,7 +28,7 @@ static void qube_front_led_set(struct led_classdev *led_cdev, } static struct led_classdev qube_front_led = { - .name = "qube-front", + .name = "qube::front", .brightness = LED_FULL, .brightness_set = qube_front_led_set, .default_trigger = "ide-disk", diff --git a/drivers/leds/leds-cobalt-raq.c b/drivers/leds/leds-cobalt-raq.c index 5f1ce810815..defc212105f 100644 --- a/drivers/leds/leds-cobalt-raq.c +++ b/drivers/leds/leds-cobalt-raq.c @@ -49,7 +49,7 @@ static void raq_web_led_set(struct led_classdev *led_cdev, } static struct led_classdev raq_web_led = { - .name = "raq-web", + .name = "raq::web", .brightness_set = raq_web_led_set, }; @@ -70,7 +70,7 @@ static void raq_power_off_led_set(struct led_classdev *led_cdev, } static struct led_classdev raq_power_off_led = { - .name = "raq-power-off", + .name = "raq::power-off", .brightness_set = raq_power_off_led_set, .default_trigger = "power-off", }; diff --git a/drivers/leds/leds-gpio.c b/drivers/leds/leds-gpio.c index 6b06638eb5b..7467980b8cf 100644 --- a/drivers/leds/leds-gpio.c +++ b/drivers/leds/leds-gpio.c @@ -80,7 +80,7 @@ static int __devinit create_gpio_led(const struct gpio_led *template, /* skip leds that aren't available */ if (!gpio_is_valid(template->gpio)) { - printk(KERN_INFO "Skipping unavilable LED gpio %d (%s)\n", + printk(KERN_INFO "Skipping unavailable LED gpio %d (%s)\n", template->gpio, template->name); return 0; } diff --git a/drivers/leds/leds-pca9532.c b/drivers/leds/leds-pca9532.c index dba8921240f..708a8017c21 100644 --- a/drivers/leds/leds-pca9532.c +++ b/drivers/leds/leds-pca9532.c @@ -34,7 +34,7 @@ struct pca9532_data { struct i2c_client *client; struct pca9532_led leds[16]; struct mutex update_lock; - struct input_dev *idev; + struct input_dev *idev; struct work_struct work; u8 pwm[2]; u8 psc[2]; @@ -53,9 +53,9 @@ MODULE_DEVICE_TABLE(i2c, pca9532_id); static struct i2c_driver pca9532_driver = { .driver = { - .name = "pca9532", + .name = "pca9532", }, - .probe = pca9532_probe, + .probe = pca9532_probe, .remove = pca9532_remove, .id_table = pca9532_id, }; @@ -149,7 +149,7 @@ static int pca9532_set_blink(struct led_classdev *led_cdev, if (*delay_on == 0 && *delay_off == 0) { /* led subsystem ask us for a blink rate */ - *delay_on = 1000; + *delay_on = 1000; *delay_off = 1000; } if (*delay_on != *delay_off || *delay_on > 1690 || *delay_on < 6) @@ -227,7 +227,7 @@ static int pca9532_configure(struct i2c_client *client, break; case PCA9532_TYPE_LED: led->state = pled->state; - led->name = pled->name; + led->name = pled->name; led->ldev.name = led->name; led->ldev.brightness = LED_OFF; led->ldev.brightness_set = pca9532_set_brightness; @@ -254,7 +254,7 @@ static int pca9532_configure(struct i2c_client *client, data->idev->name = pled->name; data->idev->phys = "i2c/pca9532"; data->idev->id.bustype = BUS_HOST; - data->idev->id.vendor = 0x001f; + data->idev->id.vendor = 0x001f; data->idev->id.product = 0x0001; data->idev->id.version = 0x0100; data->idev->evbit[0] = BIT_MASK(EV_SND); diff --git a/drivers/leds/leds-wm831x-status.c b/drivers/leds/leds-wm831x-status.c new file mode 100644 index 00000000000..c586d05e336 --- /dev/null +++ b/drivers/leds/leds-wm831x-status.c @@ -0,0 +1,341 @@ +/* + * LED driver for WM831x status LEDs + * + * Copyright(C) 2009 Wolfson Microelectronics PLC. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/leds.h> +#include <linux/err.h> +#include <linux/mfd/wm831x/core.h> +#include <linux/mfd/wm831x/pdata.h> +#include <linux/mfd/wm831x/status.h> + + +struct wm831x_status { + struct led_classdev cdev; + struct wm831x *wm831x; + struct work_struct work; + struct mutex mutex; + + spinlock_t value_lock; + int reg; /* Control register */ + int reg_val; /* Control register value */ + + int blink; + int blink_time; + int blink_cyc; + int src; + enum led_brightness brightness; +}; + +#define to_wm831x_status(led_cdev) \ + container_of(led_cdev, struct wm831x_status, cdev) + +static void wm831x_status_work(struct work_struct *work) +{ + struct wm831x_status *led = container_of(work, struct wm831x_status, + work); + unsigned long flags; + + mutex_lock(&led->mutex); + + led->reg_val &= ~(WM831X_LED_SRC_MASK | WM831X_LED_MODE_MASK | + WM831X_LED_DUTY_CYC_MASK | WM831X_LED_DUR_MASK); + + spin_lock_irqsave(&led->value_lock, flags); + + led->reg_val |= led->src << WM831X_LED_SRC_SHIFT; + if (led->blink) { + led->reg_val |= 2 << WM831X_LED_MODE_SHIFT; + led->reg_val |= led->blink_time << WM831X_LED_DUR_SHIFT; + led->reg_val |= led->blink_cyc; + } else { + if (led->brightness != LED_OFF) + led->reg_val |= 1 << WM831X_LED_MODE_SHIFT; + } + + spin_unlock_irqrestore(&led->value_lock, flags); + + wm831x_reg_write(led->wm831x, led->reg, led->reg_val); + + mutex_unlock(&led->mutex); +} + +static void wm831x_status_set(struct led_classdev *led_cdev, + enum led_brightness value) +{ + struct wm831x_status *led = to_wm831x_status(led_cdev); + unsigned long flags; + + spin_lock_irqsave(&led->value_lock, flags); + led->brightness = value; + if (value == LED_OFF) + led->blink = 0; + schedule_work(&led->work); + spin_unlock_irqrestore(&led->value_lock, flags); +} + +static int wm831x_status_blink_set(struct led_classdev *led_cdev, + unsigned long *delay_on, + unsigned long *delay_off) +{ + struct wm831x_status *led = to_wm831x_status(led_cdev); + unsigned long flags; + int ret = 0; + + /* Pick some defaults if we've not been given times */ + if (*delay_on == 0 && *delay_off == 0) { + *delay_on = 250; + *delay_off = 250; + } + + spin_lock_irqsave(&led->value_lock, flags); + + /* We only have a limited selection of settings, see if we can + * support the configuration we're being given */ + switch (*delay_on) { + case 1000: + led->blink_time = 0; + break; + case 250: + led->blink_time = 1; + break; + case 125: + led->blink_time = 2; + break; + case 62: + case 63: + /* Actually 62.5ms */ + led->blink_time = 3; + break; + default: + ret = -EINVAL; + break; + } + + if (ret == 0) { + switch (*delay_off / *delay_on) { + case 1: + led->blink_cyc = 0; + break; + case 3: + led->blink_cyc = 1; + break; + case 4: + led->blink_cyc = 2; + break; + case 8: + led->blink_cyc = 3; + break; + default: + ret = -EINVAL; + break; + } + } + + if (ret == 0) + led->blink = 1; + else + led->blink = 0; + + /* Always update; if we fail turn off blinking since we expect + * a software fallback. */ + schedule_work(&led->work); + + spin_unlock_irqrestore(&led->value_lock, flags); + + return ret; +} + +static const char *led_src_texts[] = { + "otp", + "power", + "charger", + "soft", +}; + +static ssize_t wm831x_status_src_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct led_classdev *led_cdev = dev_get_drvdata(dev); + struct wm831x_status *led = to_wm831x_status(led_cdev); + int i; + ssize_t ret = 0; + + mutex_lock(&led->mutex); + + for (i = 0; i < ARRAY_SIZE(led_src_texts); i++) + if (i == led->src) + ret += sprintf(&buf[ret], "[%s] ", led_src_texts[i]); + else + ret += sprintf(&buf[ret], "%s ", led_src_texts[i]); + + mutex_unlock(&led->mutex); + + ret += sprintf(&buf[ret], "\n"); + + return ret; +} + +static ssize_t wm831x_status_src_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t size) +{ + struct led_classdev *led_cdev = dev_get_drvdata(dev); + struct wm831x_status *led = to_wm831x_status(led_cdev); + char name[20]; + int i; + size_t len; + + name[sizeof(name) - 1] = '\0'; + strncpy(name, buf, sizeof(name) - 1); + len = strlen(name); + + if (len && name[len - 1] == '\n') + name[len - 1] = '\0'; + + for (i = 0; i < ARRAY_SIZE(led_src_texts); i++) { + if (!strcmp(name, led_src_texts[i])) { + mutex_lock(&led->mutex); + + led->src = i; + schedule_work(&led->work); + + mutex_unlock(&led->mutex); + } + } + + return size; +} + +static DEVICE_ATTR(src, 0644, wm831x_status_src_show, wm831x_status_src_store); + +static int wm831x_status_probe(struct platform_device *pdev) +{ + struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent); + struct wm831x_pdata *chip_pdata; + struct wm831x_status_pdata pdata; + struct wm831x_status *drvdata; + struct resource *res; + int id = pdev->id % ARRAY_SIZE(chip_pdata->status); + int ret; + + res = platform_get_resource(pdev, IORESOURCE_IO, 0); + if (res == NULL) { + dev_err(&pdev->dev, "No I/O resource\n"); + ret = -EINVAL; + goto err; + } + + drvdata = kzalloc(sizeof(struct wm831x_status), GFP_KERNEL); + if (!drvdata) + return -ENOMEM; + dev_set_drvdata(&pdev->dev, drvdata); + + drvdata->wm831x = wm831x; + drvdata->reg = res->start; + + if (wm831x->dev->platform_data) + chip_pdata = wm831x->dev->platform_data; + else + chip_pdata = NULL; + + memset(&pdata, 0, sizeof(pdata)); + if (chip_pdata && chip_pdata->status[id]) + memcpy(&pdata, chip_pdata->status[id], sizeof(pdata)); + else + pdata.name = dev_name(&pdev->dev); + + mutex_init(&drvdata->mutex); + INIT_WORK(&drvdata->work, wm831x_status_work); + spin_lock_init(&drvdata->value_lock); + + /* We cache the configuration register and read startup values + * from it. */ + drvdata->reg_val = wm831x_reg_read(wm831x, drvdata->reg); + + if (drvdata->reg_val & WM831X_LED_MODE_MASK) + drvdata->brightness = LED_FULL; + else + drvdata->brightness = LED_OFF; + + /* Set a default source if configured, otherwise leave the + * current hardware setting. + */ + if (pdata.default_src == WM831X_STATUS_PRESERVE) { + drvdata->src = drvdata->reg_val; + drvdata->src &= WM831X_LED_SRC_MASK; + drvdata->src >>= WM831X_LED_SRC_SHIFT; + } else { + drvdata->src = pdata.default_src - 1; + } + + drvdata->cdev.name = pdata.name; + drvdata->cdev.default_trigger = pdata.default_trigger; + drvdata->cdev.brightness_set = wm831x_status_set; + drvdata->cdev.blink_set = wm831x_status_blink_set; + + ret = led_classdev_register(wm831x->dev, &drvdata->cdev); + if (ret < 0) { + dev_err(&pdev->dev, "Failed to register LED: %d\n", ret); + goto err_led; + } + + ret = device_create_file(drvdata->cdev.dev, &dev_attr_src); + if (ret != 0) + dev_err(&pdev->dev, + "No source control for LED: %d\n", ret); + + return 0; + +err_led: + led_classdev_unregister(&drvdata->cdev); + kfree(drvdata); +err: + return ret; +} + +static int wm831x_status_remove(struct platform_device *pdev) +{ + struct wm831x_status *drvdata = platform_get_drvdata(pdev); + + device_remove_file(drvdata->cdev.dev, &dev_attr_src); + led_classdev_unregister(&drvdata->cdev); + kfree(drvdata); + + return 0; +} + +static struct platform_driver wm831x_status_driver = { + .driver = { + .name = "wm831x-status", + .owner = THIS_MODULE, + }, + .probe = wm831x_status_probe, + .remove = wm831x_status_remove, +}; + +static int __devinit wm831x_status_init(void) +{ + return platform_driver_register(&wm831x_status_driver); +} +module_init(wm831x_status_init); + +static void wm831x_status_exit(void) +{ + platform_driver_unregister(&wm831x_status_driver); +} +module_exit(wm831x_status_exit); + +MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>"); +MODULE_DESCRIPTION("WM831x status LED driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:wm831x-status"); diff --git a/drivers/leds/ledtrig-gpio.c b/drivers/leds/ledtrig-gpio.c index 1bc5db4ece0..f5913372d69 100644 --- a/drivers/leds/ledtrig-gpio.c +++ b/drivers/leds/ledtrig-gpio.c @@ -44,22 +44,22 @@ static void gpio_trig_work(struct work_struct *work) struct gpio_trig_data, work); int tmp; - if (!gpio_data->gpio) - return; - - tmp = gpio_get_value(gpio_data->gpio); - if (gpio_data->inverted) - tmp = !tmp; - - if (tmp) { - if (gpio_data->desired_brightness) - led_set_brightness(gpio_data->led, - gpio_data->desired_brightness); - else - led_set_brightness(gpio_data->led, LED_FULL); - } else { - led_set_brightness(gpio_data->led, LED_OFF); - } + if (!gpio_data->gpio) + return; + + tmp = gpio_get_value(gpio_data->gpio); + if (gpio_data->inverted) + tmp = !tmp; + + if (tmp) { + if (gpio_data->desired_brightness) + led_set_brightness(gpio_data->led, + gpio_data->desired_brightness); + else + led_set_brightness(gpio_data->led, LED_FULL); + } else { + led_set_brightness(gpio_data->led, LED_OFF); + } } static ssize_t gpio_trig_brightness_show(struct device *dev, diff --git a/drivers/macintosh/via-pmu-led.c b/drivers/macintosh/via-pmu-led.c index 55ad9567138..d242976bcfe 100644 --- a/drivers/macintosh/via-pmu-led.c +++ b/drivers/macintosh/via-pmu-led.c @@ -72,7 +72,7 @@ static void pmu_led_set(struct led_classdev *led_cdev, } static struct led_classdev pmu_led = { - .name = "pmu-front-led", + .name = "pmu-led::front", #ifdef CONFIG_ADB_PMU_LED_IDE .default_trigger = "ide-disk", #endif |