diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/misc/Kconfig | 1 | ||||
| -rw-r--r-- | drivers/misc/asus-laptop.c | 183 |
2 files changed, 183 insertions, 1 deletions
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index 87e1db8ffd4..89bba277da5 100644 --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig @@ -75,6 +75,7 @@ config ASUS_LAPTOP depends on ACPI depends on EXPERIMENTAL && !ACPI_ASUS depends on LEDS_CLASS + depends on BACKLIGHT_CLASS_DEVICE ---help--- This is the new Linux driver for Asus laptops. It may also support some MEDION, JVC or VICTOR laptops. It makes all the extra buttons generate diff --git a/drivers/misc/asus-laptop.c b/drivers/misc/asus-laptop.c index 222d4fba0ff..58ab44dc52d 100644 --- a/drivers/misc/asus-laptop.c +++ b/drivers/misc/asus-laptop.c @@ -40,6 +40,8 @@ #include <linux/types.h> #include <linux/err.h> #include <linux/proc_fs.h> +#include <linux/backlight.h> +#include <linux/fb.h> #include <linux/leds.h> #include <linux/platform_device.h> #include <acpi/acpi_drivers.h> @@ -56,6 +58,14 @@ #define ASUS_HOTK_PREFIX "\\_SB.ATKD." /* + * Some events we use, same for all Asus + */ +#define ATKD_BR_UP 0x10 +#define ATKD_BR_DOWN 0x20 +#define ATKD_LCD_ON 0x33 +#define ATKD_LCD_OFF 0x34 + +/* * Known bits returned by \_SB.ATKD.HWRS */ #define WL_HWRS 0x80 @@ -71,6 +81,7 @@ #define TLED_ON 0x08 //touchpad LED #define RLED_ON 0x10 //Record LED #define PLED_ON 0x20 //Phone LED +#define LCD_ON 0x40 //LCD backlight #define ASUS_LOG ASUS_HOTK_FILE ": " #define ASUS_ERR KERN_ERR ASUS_LOG @@ -101,6 +112,19 @@ ASUS_HANDLE(wl_switch, ASUS_HOTK_PREFIX "WLED"); ASUS_HANDLE(bt_switch, ASUS_HOTK_PREFIX "BLED"); ASUS_HANDLE(wireless_status, ASUS_HOTK_PREFIX "RSTS"); /* All new models */ +/* Brightness */ +ASUS_HANDLE(brightness_set, ASUS_HOTK_PREFIX "SPLV"); +ASUS_HANDLE(brightness_get, ASUS_HOTK_PREFIX "GPLV"); + +/* Backlight */ +ASUS_HANDLE(lcd_switch, "\\_SB.PCI0.SBRG.EC0._Q10", /* All new models */ + "\\_SB.PCI0.ISA.EC0._Q10", /* A1x */ + "\\_SB.PCI0.PX40.ECD0._Q10", /* L3C */ + "\\_SB.PCI0.PX40.EC0.Q10", /* M1A */ + "\\_SB.PCI0.LPCB.EC0._Q10", /* P30 */ + "\\_SB.PCI0.PX40.Q10", /* S1x */ + "\\Q10"); /* A2x, L2D, L3D, M2E */ + /* * This is the main structure, we can use it to store anything interesting * about the hotk device @@ -138,6 +162,21 @@ static struct acpi_driver asus_hotk_driver = { }, }; +/* The backlight device /sys/class/backlight */ +static struct backlight_device *asus_backlight_device; + +/* + * The backlight class declaration + */ +static int read_brightness(struct backlight_device *bd); +static int update_bl_status(struct backlight_device *bd); +static struct backlight_properties asusbl_data = { + .owner = THIS_MODULE, + .get_brightness = read_brightness, + .update_status = update_bl_status, + .max_brightness = 15, +}; + /* These functions actually update the LED's, and are called from a * workqueue. By doing this as separate work rather than when the LED * subsystem asks, we avoid messing with the Asus ACPI stuff during a @@ -253,6 +292,86 @@ ASUS_LED_HANDLER(pled, PLED_ON, 0); ASUS_LED_HANDLER(rled, RLED_ON, 0); ASUS_LED_HANDLER(tled, TLED_ON, 0); +static int get_lcd_state(void) +{ + return read_status(LCD_ON); +} + +static int set_lcd_state(int value) +{ + int lcd = 0; + acpi_status status = 0; + + lcd = value ? 1 : 0; + + if (lcd == get_lcd_state()) + return 0; + + if(lcd_switch_handle) { + status = acpi_evaluate_object(lcd_switch_handle, + NULL, NULL, NULL); + + if (ACPI_FAILURE(status)) + printk(ASUS_WARNING "Error switching LCD\n"); + } + + write_status(NULL, lcd, LCD_ON, 0); + return 0; +} + +static void lcd_blank(int blank) +{ + struct backlight_device *bd = asus_backlight_device; + + if(bd) { + down(&bd->sem); + if(likely(bd->props)) { + bd->props->power = blank; + if(likely(bd->props->update_status)) + bd->props->update_status(bd); + } + up(&bd->sem); + } +} + +static int read_brightness(struct backlight_device *bd) +{ + int value; + + if (!read_acpi_int(brightness_get_handle, NULL, &value, NULL)) + printk(ASUS_WARNING "Error reading brightness\n"); + + return value; +} + +static int set_brightness(struct backlight_device *bd, int value) +{ + int ret = 0; + + value = (0 < value) ? ((15 < value) ? 15 : value) : 0; + /* 0 <= value <= 15 */ + + if (!write_acpi_int(brightness_set_handle, NULL, value, NULL)) { + printk(ASUS_WARNING "Error changing brightness\n"); + ret = -EIO; + } + + return ret; +} + +static int update_bl_status(struct backlight_device *bd) +{ + int rv; + int value = bd->props->brightness; + + rv = set_brightness(bd, value); + if(rv) + return rv; + + value = (bd->props->power == FB_BLANK_UNBLANK) ? 1 : 0; + return set_lcd_state(value); +} + /* * Platform device handlers */ @@ -378,6 +497,18 @@ static void asus_hotk_notify(acpi_handle handle, u32 event, void *data) if (!hotk) return; + /* + * We need to tell the backlight device when the backlight power is + * switched + */ + if (event == ATKD_LCD_ON) { + write_status(NULL, 1, LCD_ON, 0); + lcd_blank(FB_BLANK_UNBLANK); + } else if(event == ATKD_LCD_OFF) { + write_status(NULL, 0, LCD_ON, 0); + lcd_blank(FB_BLANK_POWERDOWN); + } + acpi_bus_generate_event(hotk->device, event, hotk->event_count[event % 128]++); @@ -547,6 +678,11 @@ static int asus_hotk_get_info(void) ASUS_HANDLE_INIT(wireless_status); + ASUS_HANDLE_INIT(brightness_set); + ASUS_HANDLE_INIT(brightness_get); + + ASUS_HANDLE_INIT(lcd_switch); + kfree(model); return AE_OK; @@ -611,10 +747,13 @@ static int asus_hotk_add(struct acpi_device *device) asus_hotk_found = 1; - /* WLED and BLED are on by default */ + /* WLED and BLED are on by default */ write_status(bt_switch_handle, 1, BT_ON, 0); write_status(wl_switch_handle, 1, WL_ON, 0); + /* LCD Backlight is on by default */ + write_status(NULL, 1, LCD_ON, 0); + end: if (result) { kfree(hotk->name); @@ -642,6 +781,12 @@ static int asus_hotk_remove(struct acpi_device *device, int type) return 0; } +static void asus_backlight_exit(void) +{ + if(asus_backlight_device) + backlight_device_unregister(asus_backlight_device); +} + #define ASUS_LED_UNREGISTER(object) \ if(object##_led.class_dev \ && !IS_ERR(object##_led.class_dev)) \ @@ -659,6 +804,7 @@ static void asus_led_exit(void) static void __exit asus_laptop_exit(void) { + asus_backlight_exit(); asus_led_exit(); acpi_bus_unregister_driver(&asus_hotk_driver); @@ -669,6 +815,34 @@ static void __exit asus_laptop_exit(void) kfree(asus_info); } +static int asus_backlight_init(struct device * dev) +{ + struct backlight_device *bd; + + if(brightness_set_handle && lcd_switch_handle) { + bd = backlight_device_register (ASUS_HOTK_FILE, dev, + NULL, &asusbl_data); + if (IS_ERR (bd)) { + printk(ASUS_ERR + "Could not register asus backlight device\n"); + asus_backlight_device = NULL; + return PTR_ERR(bd); + } + + asus_backlight_device = bd; + + down(&bd->sem); + if(likely(bd->props)) { + bd->props->brightness = read_brightness(NULL); + bd->props->power = FB_BLANK_UNBLANK; + if(likely(bd->props->update_status)) + bd->props->update_status(bd); + } + up(&bd->sem); + } + return 0; +} + static int asus_led_register(acpi_handle handle, struct led_classdev * ldev, struct device * dev) @@ -739,6 +913,10 @@ static int __init asus_laptop_init(void) dev = acpi_get_physical_device(hotk->device->handle); + result = asus_backlight_init(dev); + if(result) + goto fail_backlight; + result = asus_led_init(dev); if(result) goto fail_led; @@ -778,6 +956,9 @@ fail_platform_driver: asus_led_exit(); fail_led: + asus_backlight_exit(); + +fail_backlight: return result; } |