diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/hwmon/Kconfig | 34 | ||||
| -rw-r--r-- | drivers/hwmon/Makefile | 2 | ||||
| -rw-r--r-- | drivers/hwmon/adm1031.c | 40 | ||||
| -rw-r--r-- | drivers/hwmon/coretemp.c | 57 | ||||
| -rw-r--r-- | drivers/hwmon/fscher.c | 680 | ||||
| -rw-r--r-- | drivers/hwmon/fscpos.c | 654 | ||||
| -rw-r--r-- | drivers/hwmon/ltc4215.c | 2 | ||||
| -rw-r--r-- | drivers/hwmon/ltc4245.c | 3 |
8 files changed, 90 insertions, 1382 deletions
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index ed7711d11ae..6857560144b 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -325,34 +325,6 @@ config SENSORS_F75375S This driver can also be built as a module. If so, the module will be called f75375s. -config SENSORS_FSCHER - tristate "FSC Hermes (DEPRECATED)" - depends on X86 && I2C - help - This driver is DEPRECATED please use the new merged fschmd - ("FSC Poseidon, Scylla, Hermes, Heimdall and Heracles") driver - instead. - - If you say yes here you get support for Fujitsu Siemens - Computers Hermes sensor chips. - - This driver can also be built as a module. If so, the module - will be called fscher. - -config SENSORS_FSCPOS - tristate "FSC Poseidon (DEPRECATED)" - depends on X86 && I2C - help - This driver is DEPRECATED please use the new merged fschmd - ("FSC Poseidon, Scylla, Hermes, Heimdall and Heracles") driver - instead. - - If you say yes here you get support for Fujitsu Siemens - Computers Poseidon sensor chips. - - This driver can also be built as a module. If so, the module - will be called fscpos. - config SENSORS_FSCHMD tristate "Fujitsu Siemens Computers sensor chips" depends on X86 && I2C @@ -401,12 +373,12 @@ config SENSORS_GL520SM will be called gl520sm. config SENSORS_CORETEMP - tristate "Intel Core (2) Duo/Solo temperature sensor" + tristate "Intel Core/Core2/Atom temperature sensor" depends on X86 && EXPERIMENTAL help If you say yes here you get support for the temperature - sensor inside your CPU. Supported all are all known variants - of Intel Core family. + sensor inside your CPU. Most of the family 6 CPUs + are supported. Check documentation/driver for details. config SENSORS_IBMAEM tristate "IBM Active Energy Manager temperature/power sensors and control" diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile index bcf73a9bb61..9f46cb019cc 100644 --- a/drivers/hwmon/Makefile +++ b/drivers/hwmon/Makefile @@ -42,9 +42,7 @@ obj-$(CONFIG_SENSORS_DS1621) += ds1621.o obj-$(CONFIG_SENSORS_F71805F) += f71805f.o obj-$(CONFIG_SENSORS_F71882FG) += f71882fg.o obj-$(CONFIG_SENSORS_F75375S) += f75375s.o -obj-$(CONFIG_SENSORS_FSCHER) += fscher.o obj-$(CONFIG_SENSORS_FSCHMD) += fschmd.o -obj-$(CONFIG_SENSORS_FSCPOS) += fscpos.o obj-$(CONFIG_SENSORS_G760A) += g760a.o obj-$(CONFIG_SENSORS_GL518SM) += gl518sm.o obj-$(CONFIG_SENSORS_GL520SM) += gl520sm.o diff --git a/drivers/hwmon/adm1031.c b/drivers/hwmon/adm1031.c index 789441830cd..56905955352 100644 --- a/drivers/hwmon/adm1031.c +++ b/drivers/hwmon/adm1031.c @@ -37,6 +37,7 @@ #define ADM1031_REG_PWM (0x22) #define ADM1031_REG_FAN_MIN(nr) (0x10 + (nr)) +#define ADM1031_REG_TEMP_OFFSET(nr) (0x0d + (nr)) #define ADM1031_REG_TEMP_MAX(nr) (0x14 + 4 * (nr)) #define ADM1031_REG_TEMP_MIN(nr) (0x15 + 4 * (nr)) #define ADM1031_REG_TEMP_CRIT(nr) (0x16 + 4 * (nr)) @@ -93,6 +94,7 @@ struct adm1031_data { u8 auto_temp_min[3]; u8 auto_temp_off[3]; u8 auto_temp_max[3]; + s8 temp_offset[3]; s8 temp_min[3]; s8 temp_max[3]; s8 temp_crit[3]; @@ -145,6 +147,10 @@ adm1031_write_value(struct i2c_client *client, u8 reg, unsigned int value) #define TEMP_FROM_REG_EXT(val, ext) (TEMP_FROM_REG(val) + (ext) * 125) +#define TEMP_OFFSET_TO_REG(val) (TEMP_TO_REG(val) & 0x8f) +#define TEMP_OFFSET_FROM_REG(val) TEMP_FROM_REG((val) < 0 ? \ + (val) | 0x70 : (val)) + #define FAN_FROM_REG(reg, div) ((reg) ? (11250 * 60) / ((reg) * (div)) : 0) static int FAN_TO_REG(int reg, int div) @@ -585,6 +591,14 @@ static ssize_t show_temp(struct device *dev, (((data->ext_temp[nr] >> ((nr - 1) * 3)) & 7)); return sprintf(buf, "%d\n", TEMP_FROM_REG_EXT(data->temp[nr], ext)); } +static ssize_t show_temp_offset(struct device *dev, + struct device_attribute *attr, char *buf) +{ + int nr = to_sensor_dev_attr(attr)->index; + struct adm1031_data *data = adm1031_update_device(dev); + return sprintf(buf, "%d\n", + TEMP_OFFSET_FROM_REG(data->temp_offset[nr])); +} static ssize_t show_temp_min(struct device *dev, struct device_attribute *attr, char *buf) { @@ -606,6 +620,24 @@ static ssize_t show_temp_crit(struct device *dev, struct adm1031_data *data = adm1031_update_device(dev); return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_crit[nr])); } +static ssize_t set_temp_offset(struct device *dev, + struct device_attribute *attr, const char *buf, + size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct adm1031_data *data = i2c_get_clientdata(client); + int nr = to_sensor_dev_attr(attr)->index; + int val; + + val = simple_strtol(buf, NULL, 10); + val = SENSORS_LIMIT(val, -15000, 15000); + mutex_lock(&data->update_lock); + data->temp_offset[nr] = TEMP_OFFSET_TO_REG(val); + adm1031_write_value(client, ADM1031_REG_TEMP_OFFSET(nr), + data->temp_offset[nr]); + mutex_unlock(&data->update_lock); + return count; +} static ssize_t set_temp_min(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { @@ -661,6 +693,8 @@ static ssize_t set_temp_crit(struct device *dev, struct device_attribute *attr, #define temp_reg(offset) \ static SENSOR_DEVICE_ATTR(temp##offset##_input, S_IRUGO, \ show_temp, NULL, offset - 1); \ +static SENSOR_DEVICE_ATTR(temp##offset##_offset, S_IRUGO | S_IWUSR, \ + show_temp_offset, set_temp_offset, offset - 1); \ static SENSOR_DEVICE_ATTR(temp##offset##_min, S_IRUGO | S_IWUSR, \ show_temp_min, set_temp_min, offset - 1); \ static SENSOR_DEVICE_ATTR(temp##offset##_max, S_IRUGO | S_IWUSR, \ @@ -714,6 +748,7 @@ static struct attribute *adm1031_attributes[] = { &sensor_dev_attr_pwm1.dev_attr.attr, &sensor_dev_attr_auto_fan1_channel.dev_attr.attr, &sensor_dev_attr_temp1_input.dev_attr.attr, + &sensor_dev_attr_temp1_offset.dev_attr.attr, &sensor_dev_attr_temp1_min.dev_attr.attr, &sensor_dev_attr_temp1_min_alarm.dev_attr.attr, &sensor_dev_attr_temp1_max.dev_attr.attr, @@ -721,6 +756,7 @@ static struct attribute *adm1031_attributes[] = { &sensor_dev_attr_temp1_crit.dev_attr.attr, &sensor_dev_attr_temp1_crit_alarm.dev_attr.attr, &sensor_dev_attr_temp2_input.dev_attr.attr, + &sensor_dev_attr_temp2_offset.dev_attr.attr, &sensor_dev_attr_temp2_min.dev_attr.attr, &sensor_dev_attr_temp2_min_alarm.dev_attr.attr, &sensor_dev_attr_temp2_max.dev_attr.attr, @@ -757,6 +793,7 @@ static struct attribute *adm1031_attributes_opt[] = { &sensor_dev_attr_pwm2.dev_attr.attr, &sensor_dev_attr_auto_fan2_channel.dev_attr.attr, &sensor_dev_attr_temp3_input.dev_attr.attr, + &sensor_dev_attr_temp3_offset.dev_attr.attr, &sensor_dev_attr_temp3_min.dev_attr.attr, &sensor_dev_attr_temp3_min_alarm.dev_attr.attr, &sensor_dev_attr_temp3_max.dev_attr.attr, @@ -937,6 +974,9 @@ static struct adm1031_data *adm1031_update_device(struct device *dev) } data->temp[chan] = newh; + data->temp_offset[chan] = + adm1031_read_value(client, + ADM1031_REG_TEMP_OFFSET(chan)); data->temp_min[chan] = adm1031_read_value(client, ADM1031_REG_TEMP_MIN(chan)); diff --git a/drivers/hwmon/coretemp.c b/drivers/hwmon/coretemp.c index 972cf4ba963..caef39cda8c 100644 --- a/drivers/hwmon/coretemp.c +++ b/drivers/hwmon/coretemp.c @@ -157,17 +157,26 @@ static int __devinit adjust_tjmax(struct cpuinfo_x86 *c, u32 id, struct device * /* The 100C is default for both mobile and non mobile CPUs */ int tjmax = 100000; - int ismobile = 1; + int tjmax_ee = 85000; + int usemsr_ee = 1; int err; u32 eax, edx; /* Early chips have no MSR for TjMax */ if ((c->x86_model == 0xf) && (c->x86_mask < 4)) { - ismobile = 0; + usemsr_ee = 0; } - if ((c->x86_model > 0xe) && (ismobile)) { + /* Atoms seems to have TjMax at 90C */ + + if (c->x86_model == 0x1c) { + usemsr_ee = 0; + tjmax = 90000; + } + + if ((c->x86_model > 0xe) && (usemsr_ee)) { + u8 platform_id; /* Now we can detect the mobile CPU using Intel provided table http://softwarecommunity.intel.com/Wiki/Mobility/720.htm @@ -179,13 +188,29 @@ static int __devinit adjust_tjmax(struct cpuinfo_x86 *c, u32 id, struct device * dev_warn(dev, "Unable to access MSR 0x17, assuming desktop" " CPU\n"); - ismobile = 0; - } else if (!(eax & 0x10000000)) { - ismobile = 0; + usemsr_ee = 0; + } else if (c->x86_model < 0x17 && !(eax & 0x10000000)) { + /* Trust bit 28 up to Penryn, I could not find any + documentation on that; if you happen to know + someone at Intel please ask */ + usemsr_ee = 0; + } else { + /* Platform ID bits 52:50 (EDX starts at bit 32) */ + platform_id = (edx >> 18) & 0x7; + + /* Mobile Penryn CPU seems to be platform ID 7 or 5 + (guesswork) */ + if ((c->x86_model == 0x17) && + ((platform_id == 5) || (platform_id == 7))) { + /* If MSR EE bit is set, set it to 90 degrees C, + otherwise 105 degrees C */ + tjmax_ee = 90000; + tjmax = 105000; + } } } - if (ismobile || c->x86_model == 0x1c) { + if (usemsr_ee) { err = rdmsr_safe_on_cpu(id, 0xee, &eax, &edx); if (err) { @@ -193,9 +218,11 @@ static int __devinit adjust_tjmax(struct cpuinfo_x86 *c, u32 id, struct device * "Unable to access MSR 0xEE, for Tjmax, left" " at default"); } else if (eax & 0x40000000) { - tjmax = 85000; + tjmax = tjmax_ee; } - } else { + /* if we dont use msr EE it means we are desktop CPU (with exeception + of Atom) */ + } else if (tjmax == 100000) { dev_warn(dev, "Using relative temperature scale!\n"); } @@ -248,9 +275,9 @@ static int __devinit coretemp_probe(struct platform_device *pdev) platform_set_drvdata(pdev, data); /* read the still undocumented IA32_TEMPERATURE_TARGET it exists - on older CPUs but not in this register */ + on older CPUs but not in this register, Atoms don't have it either */ - if (c->x86_model > 0xe) { + if ((c->x86_model > 0xe) && (c->x86_model != 0x1c)) { err = rdmsr_safe_on_cpu(data->id, 0x1a2, &eax, &edx); if (err) { dev_warn(&pdev->dev, "Unable to read" @@ -413,11 +440,15 @@ static int __init coretemp_init(void) for_each_online_cpu(i) { struct cpuinfo_x86 *c = &cpu_data(i); - /* check if family 6, models 0xe, 0xf, 0x16, 0x17, 0x1A */ + /* check if family 6, models 0xe (Pentium M DC), + 0xf (Core 2 DC 65nm), 0x16 (Core 2 SC 65nm), + 0x17 (Penryn 45nm), 0x1a (Nehalem), 0x1c (Atom), + 0x1e (Lynnfield) */ if ((c->cpuid_level < 0) || (c->x86 != 0x6) || !((c->x86_model == 0xe) || (c->x86_model == 0xf) || (c->x86_model == 0x16) || (c->x86_model == 0x17) || - (c->x86_model == 0x1A) || (c->x86_model == 0x1c))) { + (c->x86_model == 0x1a) || (c->x86_model == 0x1c) || + (c->x86_model == 0x1e))) { /* supported CPU not found, but report the unknown family 6 CPU */ diff --git a/drivers/hwmon/fscher.c b/drivers/hwmon/fscher.c deleted file mode 100644 index 12c70e402cb..00000000000 --- a/drivers/hwmon/fscher.c +++ /dev/null @@ -1,680 +0,0 @@ -/* - * fscher.c - Part of lm_sensors, Linux kernel modules for hardware - * monitoring - * Copyright (C) 2003, 2004 Reinhard Nissl <rnissl@gmx.de> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -/* - * fujitsu siemens hermes chip, - * module based on fscpos.c - * Copyright (C) 2000 Hermann Jung <hej@odn.de> - * Copyright (C) 1998, 1999 Frodo Looijaard <frodol@dds.nl> - * and Philip Edelbrock <phil@netroedge.com> - */ - -#include <linux/module.h> -#include <linux/init.h> -#include <linux/slab.h> -#include <linux/jiffies.h> -#include <linux/i2c.h> -#include <linux/hwmon.h> -#include <linux/err.h> -#include <linux/mutex.h> -#include <linux/sysfs.h> - -/* - * Addresses to scan - */ - -static const unsigned short normal_i2c[] = { 0x73, I2C_CLIENT_END }; - -/* - * Insmod parameters - */ - -I2C_CLIENT_INSMOD_1(fscher); - -/* - * The FSCHER registers - */ - -/* chip identification */ -#define FSCHER_REG_IDENT_0 0x00 -#define FSCHER_REG_IDENT_1 0x01 -#define FSCHER_REG_IDENT_2 0x02 -#define FSCHER_REG_REVISION 0x03 - -/* global control and status */ -#define FSCHER_REG_EVENT_STATE 0x04 -#define FSCHER_REG_CONTROL 0x05 - -/* watchdog */ -#define FSCHER_REG_WDOG_PRESET 0x28 -#define FSCHER_REG_WDOG_STATE 0x23 -#define FSCHER_REG_WDOG_CONTROL 0x21 - -/* fan 0 */ -#define FSCHER_REG_FAN0_MIN 0x55 -#define FSCHER_REG_FAN0_ACT 0x0e -#define FSCHER_REG_FAN0_STATE 0x0d -#define FSCHER_REG_FAN0_RIPPLE 0x0f - -/* fan 1 */ -#define FSCHER_REG_FAN1_MIN 0x65 -#define FSCHER_REG_FAN1_ACT 0x6b -#define FSCHER_REG_FAN1_STATE 0x62 -#define FSCHER_REG_FAN1_RIPPLE 0x6f - -/* fan 2 */ -#define FSCHER_REG_FAN2_MIN 0xb5 -#define FSCHER_REG_FAN2_ACT 0xbb -#define FSCHER_REG_FAN2_STATE 0xb2 -#define FSCHER_REG_FAN2_RIPPLE 0xbf - -/* voltage supervision */ -#define FSCHER_REG_VOLT_12 0x45 -#define FSCHER_REG_VOLT_5 0x42 -#define FSCHER_REG_VOLT_BATT 0x48 - -/* temperature 0 */ -#define FSCHER_REG_TEMP0_ACT 0x64 -#define FSCHER_REG_TEMP0_STATE 0x71 - -/* temperature 1 */ -#define FSCHER_REG_TEMP1_ACT 0x32 -#define FSCHER_REG_TEMP1_STATE 0x81 - -/* temperature 2 */ -#define FSCHER_REG_TEMP2_ACT 0x35 -#define FSCHER_REG_TEMP2_STATE 0x91 - -/* - * Functions declaration - */ - -static int fscher_probe(struct i2c_client *client, - const struct i2c_device_id *id); -static int fscher_detect(struct i2c_client *client, int kind, - struct i2c_board_info *info); -static int fscher_remove(struct i2c_client *client); -static struct fscher_data *fscher_update_device(struct device *dev); -static void fscher_init_client(struct i2c_client *client); - -static int fscher_read_value(struct i2c_client *client, u8 reg); -static int fscher_write_value(struct i2c_client *client, u8 reg, u8 value); - -/* - * Driver data (common to all clients) - */ - -static const struct i2c_device_id fscher_id[] = { - { "fscher", fscher }, - { } -}; - -static struct i2c_driver fscher_driver = { - .class = I2C_CLASS_HWMON, - .driver = { - .name = "fscher", - }, - .probe = fscher_probe, - .remove = fscher_remove, - .id_table = fscher_id, - .detect = fscher_detect, - .address_data = &addr_data, -}; - -/* - * Client data (each client gets its own) - */ - -struct fscher_data { - struct device *hwmon_dev; - struct mutex update_lock; - char valid; /* zero until following fields are valid */ - unsigned long last_updated; /* in jiffies */ - - /* register values */ - u8 revision; /* revision of chip */ - u8 global_event; /* global event status */ - u8 global_control; /* global control register */ - u8 watchdog[3]; /* watchdog */ - u8 volt[3]; /* 12, 5, battery voltage */ - u8 temp_act[3]; /* temperature */ - u8 temp_status[3]; /* status of sensor */ - u8 fan_act[3]; /* fans revolutions per second */ - u8 fan_status[3]; /* fan status */ - u8 fan_min[3]; /* fan min value for rps */ - u8 fan_ripple[3]; /* divider for rps */ -}; - -/* - * Sysfs stuff - */ - -#define sysfs_r(kind, sub, offset, reg) \ -static ssize_t show_##kind##sub (struct fscher_data *, char *, int); \ -static ssize_t show_##kind##offset##sub (struct device *, struct device_attribute *attr, char *); \ -static ssize_t show_##kind##offset##sub (struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - struct fscher_data *data = fscher_update_device(dev); \ - return show_##kind##sub(data, buf, (offset)); \ -} - -#define sysfs_w(kind, sub, offset, reg) \ -static ssize_t set_##kind##sub (struct i2c_client *, struct fscher_data *, const char *, size_t, int, int); \ -static ssize_t set_##kind##offset##sub (struct device *, struct device_attribute *attr, const char *, size_t); \ -static ssize_t set_##kind##offset##sub (struct device *dev, struct device_attribute *attr, const char *buf, size_t count) \ -{ \ - struct i2c_client *client = to_i2c_client(dev); \ - struct fscher_data *data = i2c_get_clientdata(client); \ - return set_##kind##sub(client, data, buf, count, (offset), reg); \ -} - -#define sysfs_rw_n(kind, sub, offset, reg) \ -sysfs_r(kind, sub, offset, reg) \ -sysfs_w(kind, sub, offset, reg) \ -static DEVICE_ATTR(kind##offset##sub, S_IRUGO | S_IWUSR, show_##kind##offset##sub, set_##kind##offset##sub); - -#define sysfs_rw(kind, sub, reg) \ -sysfs_r(kind, sub, 0, reg) \ -sysfs_w(kind, sub, 0, reg) \ -static DEVICE_ATTR(kind##sub, S_IRUGO | S_IWUSR, show_##kind##0##sub, set_##kind##0##sub); - -#define sysfs_ro_n(kind, sub, offset, reg) \ -sysfs_r(kind, sub, offset, reg) \ -static DEVICE_ATTR(kind##offset##sub, S_IRUGO, show_##kind##offset##sub, NULL); - -#define sysfs_ro(kind, sub, reg) \ -sysfs_r(kind, sub, 0, reg) \ -static DEVICE_ATTR(kind, S_IRUGO, show_##kind##0##sub, NULL); - -#define sysfs_fan(offset, reg_status, reg_min, reg_ripple, reg_act) \ -sysfs_rw_n(pwm, , offset, reg_min) \ -sysfs_rw_n(fan, _status, offset, reg_status) \ -sysfs_rw_n(fan, _div , offset, reg_ripple) \ -sysfs_ro_n(fan, _input , offset, reg_act) - -#define sysfs_temp(offset, reg_status, reg_act) \ -sysfs_rw_n(temp, _status, offset, reg_status) \ -sysfs_ro_n(temp, _input , offset, reg_act) - -#define sysfs_in(offset, reg_act) \ -sysfs_ro_n(in, _input, offset, reg_act) - -#define sysfs_revision(reg_revision) \ -sysfs_ro(revision, , reg_revision) - -#define sysfs_alarms(reg_events) \ -sysfs_ro(alarms, , reg_events) - -#define sysfs_control(reg_control) \ -sysfs_rw(control, , reg_control) - -#define sysfs_watchdog(reg_control, reg_status, reg_preset) \ -sysfs_rw(watchdog, _control, reg_control) \ -sysfs_rw(watchdog, _status , reg_status) \ -sysfs_rw(watchdog, _preset , reg_preset) - -sysfs_fan(1, FSCHER_REG_FAN0_STATE, FSCHER_REG_FAN0_MIN, - FSCHER_REG_FAN0_RIPPLE, FSCHER_REG_FAN0_ACT) -sysfs_fan(2, FSCHER_REG_FAN1_STATE, FSCHER_REG_FAN1_MIN, - FSCHER_REG_FAN1_RIPPLE, FSCHER_REG_FAN1_ACT) -sysfs_fan(3, FSCHER_REG_FAN2_STATE, FSCHER_REG_FAN2_MIN, - FSCHER_REG_FAN2_RIPPLE, FSCHER_REG_FAN2_ACT) - -sysfs_temp(1, FSCHER_REG_TEMP0_STATE, FSCHER_REG_TEMP0_ACT) -sysfs_temp(2, FSCHER_REG_TEMP1_STATE, FSCHER_REG_TEMP1_ACT) -sysfs_temp(3, FSCHER_REG_TEMP2_STATE, FSCHER_REG_TEMP2_ACT) - -sysfs_in(0, FSCHER_REG_VOLT_12) -sysfs_in(1, FSCHER_REG_VOLT_5) -sysfs_in(2, FSCHER_REG_VOLT_BATT) - -sysfs_revision(FSCHER_REG_REVISION) -sysfs_alarms(FSCHER_REG_EVENTS) -sysfs_control(FSCHER_REG_CONTROL) -sysfs_watchdog(FSCHER_REG_WDOG_CONTROL, FSCHER_REG_WDOG_STATE, FSCHER_REG_WDOG_PRESET) - -static struct attribute *fscher_attributes[] = { - &dev_attr_revision.attr, - &dev_attr_alarms.attr, - &dev_attr_control.attr, - - &dev_attr_watchdog_status.attr, - &dev_attr_watchdog_control.attr, - &dev_attr_watchdog_preset.attr, - - &dev_attr_in0_input.attr, - &dev_attr_in1_input.attr, - &dev_attr_in2_input.attr, - - &dev_attr_fan1_status.attr, - &dev_attr_fan1_div.attr, - &dev_attr_fan1_input.attr, - &dev_attr_pwm1.attr, - &dev_attr_fan2_status.attr, - &dev_attr_fan2_div.attr, - &dev_attr_fan2_input.attr, - &dev_attr_pwm2.attr, - &dev_attr_fan3_status.attr, - &dev_attr_fan3_div.attr, - &dev_attr_fan3_input.attr, - &dev_attr_pwm3.attr, - - &dev_attr_temp1_status.attr, - &dev_attr_temp1_input.attr, - &dev_attr_temp2_status.attr, - &dev_attr_temp2_input.attr, - &dev_attr_temp3_status.attr, - &dev_attr_temp3_input.attr, - NULL -}; - -static const struct attribute_group fscher_group = { - .attrs = fscher_attributes, -}; - -/* - * Real code - */ - -/* Return 0 if detection is successful, -ENODEV otherwise */ -static int fscher_detect(struct i2c_client *new_client, int kind, - struct i2c_board_info *info) -{ - struct i2c_adapter *adapter = new_client->adapter; - - if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) - return -ENODEV; - - /* Do the remaining detection unless force or force_fscher parameter */ - if (kind < 0) { - if ((i2c_smbus_read_byte_data(new_client, - FSCHER_REG_IDENT_0) != 0x48) /* 'H' */ - || (i2c_smbus_read_byte_data(new_client, - FSCHER_REG_IDENT_1) != 0x45) /* 'E' */ - || (i2c_smbus_read_byte_data(new_client, - FSCHER_REG_IDENT_2) != 0x52)) /* 'R' */ - return -ENODEV; - } - - strlcpy(info->type, "fscher", I2C_NAME_SIZE); - - return 0; -} - -static int fscher_probe(struct i2c_client *new_client, - const struct i2c_device_id *id) -{ - struct fscher_data *data; - int err; - - data = kzalloc(sizeof(struct fscher_data), GFP_KERNEL); - if (!data) { - err = -ENOMEM; - goto exit; - } - - i2c_set_clientdata(new_client, data); - data->valid = 0; - mutex_init(&data->update_lock); - - fscher_init_client(new_client); - - /* Register sysfs hooks */ - if ((err = sysfs_create_group(&new_client->dev.kobj, &fscher_group))) - goto exit_free; - - data->hwmon_dev = hwmon_device_register(&new_client->dev); - if (IS_ERR(data->hwmon_dev)) { - err = PTR_ERR(data->hwmon_dev); - goto exit_remove_files; - } - - return 0; - -exit_remove_files: - sysfs_remove_group(&new_client->dev.kobj, &fscher_group); -exit_free: - kfree(data); -exit: - return err; -} - -static int fscher_remove(struct i2c_client *client) -{ - struct fscher_data *data = i2c_get_clientdata(client); - - hwmon_device_unregister(data->hwmon_dev); - sysfs_remove_group(&client->dev.kobj, &fscher_group); - - kfree(data); - return 0; -} - -static int fscher_read_value(struct i2c_client *client, u8 reg) -{ - dev_dbg(&client->dev, "read reg 0x%02x\n", reg); - - return i2c_smbus_read_byte_data(client, reg); -} - -static int fscher_write_value(struct i2c_client *client, u8 reg, u8 value) -{ - dev_dbg(&client->dev, "write reg 0x%02x, val 0x%02x\n", - reg, value); - - return i2c_smbus_write_byte_data(client, reg, value); -} - -/* Called when we have found a new FSC Hermes. */ -static void fscher_init_client(struct i2c_client *client) -{ - struct fscher_data *data = i2c_get_clientdata(client); - - /* Read revision from chip */ - data->revision = fscher_read_value(client, FSCHER_REG_REVISION); -} - -static struct fscher_data *fscher_update_device(struct device *dev) -{ - struct i2c_client *client = to_i2c_client(dev); - struct fscher_data *data = i2c_get_clientdata(client); - - mutex_lock(&data->update_lock); - - if (time_after(jiffies, data->last_updated + 2 * HZ) || !data->valid) { - - dev_dbg(&client->dev, "Starting fscher update\n"); - - data->temp_act[0] = fscher_read_value(client, FSCHER_REG_TEMP0_ACT); - data->temp_act[1] = fscher_read_value(client, FSCHER_REG_TEMP1_ACT); - data->temp_act[2] = fscher_read_value(client, FSCHER_REG_TEMP2_ACT); - data->temp_status[0] = fscher_read_value(client, FSCHER_REG_TEMP0_STATE); - data->temp_status[1] = fscher_read_value(client, FSCHER_REG_TEMP1_STATE); - data->temp_status[2] = fscher_read_value(client, FSCHER_REG_TEMP2_STATE); - - data->volt[0] = fscher_read_value(client, FSCHER_REG_VOLT_12); - data->volt[1] = fscher_read_value(client, FSCHER_REG_VOLT_5); - data->volt[2] = fscher_read_value(client, FSCHER_REG_VOLT_BATT); - - data->fan_act[0] = fscher_read_value(client, FSCHER_REG_FAN0_ACT); - data->fan_act[1] = fscher_read_value(client, FSCHER_REG_FAN1_ACT); - data->fan_act[2] = fscher_read_value(client, FSCHER_REG_FAN2_ACT); - data->fan_status[0] = fscher_read_value(client, FSCHER_REG_FAN0_STATE); - data->fan_status[1] = fscher_read_value(client, FSCHER_REG_FAN1_STATE); - data->fan_status[2] = fscher_read_value(client, FSCHER_REG_FAN2_STATE); - data->fan_min[0] = fscher_read_value(client, FSCHER_REG_FAN0_MIN); - data->fan_min[1] = fscher_read_value(client, FSCHER_REG_FAN1_MIN); - data->fan_min[2] = fscher_read_value(client, FSCHER_REG_FAN2_MIN); - data->fan_ripple[0] = fscher_read_value(client, FSCHER_REG_FAN0_RIPPLE); - data->fan_ripple[1] = fscher_read_value(client, FSCHER_REG_FAN1_RIPPLE); - data->fan_ripple[2] = fscher_read_value(client, FSCHER_REG_FAN2_RIPPLE); - - data->watchdog[0] = fscher_read_value(client, FSCHER_REG_WDOG_PRESET); - data->watchdog[1] = fscher_read_value(client, FSCHER_REG_WDOG_STATE); - data->watchdog[2] = fscher_read_value(client, FSCHER_REG_WDOG_CONTROL); - - data->global_event = fscher_read_value(client, FSCHER_REG_EVENT_STATE); - data->global_control = fscher_read_value(client, - FSCHER_REG_CONTROL); - - data->last_updated = jiffies; - data->valid = 1; - } - - mutex_unlock(&data->update_lock); - - return data; -} - - - -#define FAN_INDEX_FROM_NUM(nr) ((nr) - 1) - -static ssize_t set_fan_status(struct i2c_client *client, struct fscher_data *data, - const char *buf, size_t count, int nr, int reg) -{ - /* bits 0..1, 3..7 reserved => mask with 0x04 */ - unsigned long v = simple_strtoul(buf, NULL, 10) & 0x04; - - mutex_lock(&data->update_lock); - data->fan_status[FAN_INDEX_FROM_NUM(nr)] &= ~v; - fscher_write_value(client, reg, v); - mutex_unlock(&data->update_lock); - return count; -} - -static ssize_t show_fan_status(struct fscher_data *data, char *buf, int nr) -{ - /* bits 0..1, 3..7 reserved => mask with 0x04 */ - return sprintf(buf, "%u\n", data->fan_status[FAN_INDEX_FROM_NUM(nr)] & 0x04); -} - -static ssize_t set_pwm(struct i2c_client *client, struct fscher_data *data, - const char *buf, size_t count, int nr, int reg) -{ - unsigned long v = simple_strtoul(buf, NULL, 10); - - mutex_lock(&data->update_lock); - data->fan_min[FAN_INDEX_FROM_NUM(nr)] = v > 0xff ? 0xff : v; - fscher_write_value(client, reg, data->fan_min[FAN_INDEX_FROM_NUM(nr)]); - mutex_unlock(&data->update_lock); - return count; -} - -static ssize_t show_pwm(struct fscher_data *data, char *buf, int nr) -{ - return sprintf(buf, "%u\n", data->fan_min[FAN_INDEX_FROM_NUM(nr)]); -} - -static ssize_t set_fan_div(struct i2c_client *client, struct fscher_data *data, - const char *buf, size_t count, int nr, int reg) -{ - /* supported values: 2, 4, 8 */ - unsigned long v = simple_strtoul(buf, NULL, 10); - - switch (v) { - case 2: v = 1; break; - case 4: v = 2; break; - case 8: v = 3; break; - default: - dev_err(&client->dev, "fan_div value %ld not " - "supported. Choose one of 2, 4 or 8!\n", v); - return -EINVAL; - } - - mutex_lock(&data->update_lock); - - /* bits 2..7 reserved => mask with 0x03 */ - data->fan_ripple[FAN_INDEX_FROM_NUM(nr)] &= ~0x03; - data->fan_ripple[FAN_INDEX_FROM_NUM(nr)] |= v; - - fscher_write_value(client, reg, data->fan_ripple[FAN_INDEX_FROM_NUM(nr)]); - mutex_unlock(&data->update_lock); - return count; -} - -static ssize_t show_fan_div(struct fscher_data *data, char *buf, int nr) -{ - /* bits 2..7 reserved => mask with 0x03 */ - return sprintf(buf, "%u\n", 1 << (data->fan_ripple[FAN_INDEX_FROM_NUM(nr)] & 0x03)); -} - -#define RPM_FROM_REG(val) (val*60) - -static ssize_t show_fan_input (struct fscher_data *data, char *buf, int nr) -{ - return sprintf(buf, "%u\n", RPM_FROM_REG(data->fan_act[FAN_INDEX_FROM_NUM(nr)])); -} - - - -#define TEMP_INDEX_FROM_NUM(nr) ((nr) - 1) - -static ssize_t set_temp_status(struct i2c_client *client, struct fscher_data *data, - const char *buf, size_t count, int nr, int reg) -{ - /* bits 2..7 reserved, 0 read only => mask with 0x02 */ - unsigned long v = simple_strtoul(buf, NULL, 10) & 0x02; - - mutex_lock(&data->update_lock); - data->temp_status[TEMP_INDEX_FROM_NUM(nr)] &= ~v; - fscher_write_value(client, reg, v); - mutex_unlock(&data->update_lock); - return count; -} - -static ssize_t show_temp_status(struct fscher_data *data, char *buf, int nr) -{ - /* bits 2..7 reserved => mask with 0x03 */ - return sprintf(buf, "%u\n", data->temp_status[TEMP_INDEX_FROM_NUM(nr)] & 0x03); -} - -#define TEMP_FROM_REG(val) (((val) - 128) * 1000) - -static ssize_t show_temp_input(struct fscher_data *data, char *buf, int nr) -{ - return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_act[TEMP_INDEX_FROM_NUM(nr)])); -} - -/* - * The final conversion is specified in sensors.conf, as it depends on - * mainboard specific values. We export the registers contents as - * pseudo-hundredths-of-Volts (range 0V - 2.55V). Not that it makes much - * sense per se, but it minimizes the conversions count and keeps the - * values within a usual range. - */ -#define VOLT_FROM_REG(val) ((val) * 10) - -static ssize_t show_in_input(struct fscher_data *data, char *buf, int nr) -{ - return sprintf(buf, "%u\n", VOLT_FROM_REG(data->volt[nr])); -} - - - -static ssize_t show_revision(struct fscher_data *data, char *buf, int nr) -{ - return sprintf(buf, "%u\n", data->revision); -} - - - -static ssize_t show_alarms(struct fscher_data *data, char *buf, int nr) -{ - /* bits 2, 5..6 reserved => mask with 0x9b */ - return sprintf(buf, "%u\n", data->global_event & 0x9b); -} - - - -static ssize_t set_control(struct i2c_client *client, struct fscher_data *data, - const char *buf, size_t count, int nr, int reg) -{ - /* bits 1..7 reserved => mask with 0x01 */ - unsigned long v = simple_strtoul(buf, NULL, 10) & 0x01; - - mutex_lock(&data->update_lock); - data->global_control = v; - fscher_write_value(client, reg, v); - mutex_unlock(&data->update_lock); - return count; -} - -static ssize_t show_control(struct fscher_data *data, char *buf, int nr) -{ - /* bits 1..7 reserved => mask with 0x01 */ - return sprintf(buf, "%u\n", data->global_control & 0x01); -} - - - -static ssize_t set_watchdog_control(struct i2c_client *client, struct - fscher_data *data, const char *buf, size_t count, - int nr, int reg) -{ - /* bits 0..3 reserved => mask with 0xf0 */ - unsigned long v = simple_strtoul(buf, NULL, 10) & 0xf0; - - mutex_lock(&data->update_lock); - data->watchdog[2] &= ~0xf0; - data->watchdog[2] |= v; - fscher_write_value(client, reg, data->watchdog[2]); - mutex_unlock(&data->update_lock); - return count; -} - -static ssize_t show_watchdog_control(struct fscher_data *data, char *buf, int nr) -{ - /* bits 0..3 reserved, bit 5 write only => mask with 0xd0 */ - return sprintf(buf, "%u\n", data->watchdog[2] & 0xd0); -} - -static ssize_t set_watchdog_status(struct i2c_client *client, struct fscher_data *data, - const char *buf, size_t count, int nr, int reg) -{ - /* bits 0, 2..7 reserved => mask with 0x02 */ - unsigned long v = simple_strtoul(buf, NULL, 10) & 0x02; - - mutex_lock(&data->update_lock); - data->watchdog[1] &= ~v; - fscher_write_value(client, reg, v); - mutex_unlock(&data->update_lock); - return count; -} - -static ssize_t show_watchdog_status(struct fscher_data *data, char *buf, int nr) -{ - /* bits 0, 2..7 reserved => mask with 0x02 */ - return sprintf(buf, "%u\n", data->watchdog[1] & 0x02); -} - -static ssize_t set_watchdog_preset(struct i2c_client *client, struct fscher_data *data, - const char *buf, size_t count, int nr, int reg) -{ - unsigned long v = simple_strtoul(buf, NULL, 10) & 0xff; - - mutex_lock(&data->update_lock); - data->watchdog[0] = v; - fscher_write_value(client, reg, data->watchdog[0]); - mutex_unlock(&data->update_lock); - return count; -} - -static ssize_t show_watchdog_preset(struct fscher_data *data, char *buf, int nr) -{ - return sprintf(buf, "%u\n", data->watchdog[0]); -} - -static int __init sensors_fscher_init(void) -{ - return i2c_add_driver(&fscher_driver); -} - -static void __exit sensors_fscher_exit(void) -{ - i2c_del_driver(&fscher_driver); -} - -MODULE_AUTHOR("Reinhard Nissl <rnissl@gmx.de>"); -MODULE_DESCRIPTION("FSC Hermes driver"); -MODULE_LICENSE("GPL"); - -module_init(sensors_fscher_init); -module_exit(sensors_fscher_exit); diff --git a/drivers/hwmon/fscpos.c b/drivers/hwmon/fscpos.c deleted file mode 100644 index 8a7bcf500b4..00000000000 --- a/drivers/hwmon/fscpos.c +++ /dev/null @@ -1,654 +0,0 @@ -/* - fscpos.c - Kernel module for hardware monitoring with FSC Poseidon chips - Copyright (C) 2004, 2005 Stefan Ott <stefan@desire.ch> - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -*/ - -/* - fujitsu siemens poseidon chip, - module based on the old fscpos module by Hermann Jung <hej@odn.de> and - the fscher module by Reinhard Nissl <rnissl@gmx.de> - - original module based on lm80.c - Copyright (C) 1998, 1999 Frodo Looijaard <frodol@dds.nl> - and Philip Edelbrock <phil@netroedge.com> - - Thanks to Jean Delvare for reviewing my code and suggesting a lot of - improvements. -*/ - -#include <linux/module.h> -#include <linux/slab.h> -#include <linux/jiffies.h> -#include <linux/i2c.h> -#include <linux/init.h> -#include <linux/hwmon.h> -#include <linux/err.h> -#include <linux/mutex.h> -#include <linux/sysfs.h> - -/* - * Addresses to scan - */ -static const unsigned short normal_i2c[] = { 0x73, I2C_CLIENT_END }; - -/* - * Insmod parameters - */ -I2C_CLIENT_INSMOD_1(fscpos); - -/* - * The FSCPOS registers - */ - -/* chip identification */ -#define FSCPOS_REG_IDENT_0 0x00 -#define FSCPOS_REG_IDENT_1 0x01 -#define FSCPOS_REG_IDENT_2 0x02 -#define FSCPOS_REG_REVISION 0x03 - -/* global control and status */ -#define FSCPOS_REG_EVENT_STATE 0x04 -#define FSCPOS_REG_CONTROL 0x05 - -/* watchdog */ -#define FSCPOS_REG_WDOG_PRESET 0x28 -#define FSCPOS_REG_WDOG_STATE 0x23 -#define FSCPOS_REG_WDOG_CONTROL 0x21 - -/* voltages */ -#define FSCPOS_REG_VOLT_12 0x45 -#define FSCPOS_REG_VOLT_5 0x42 -#define FSCPOS_REG_VOLT_BATT 0x48 - -/* fans - the chip does not support minimum speed for fan2 */ -static u8 FSCPOS_REG_PWM[] = { 0x55, 0x65 }; -static u8 FSCPOS_REG_FAN_ACT[] = { 0x0e, 0x6b, 0xab }; -static u8 FSCPOS_REG_FAN_STATE[] = { 0x0d, 0x62, 0xa2 }; -static u8 FSCPOS_REG_FAN_RIPPLE[] = { 0x0f, 0x6f, 0xaf }; - -/* temperatures */ -static u8 FSCPOS_REG_TEMP_ACT[] = { 0x64, 0x32, 0x35 }; -static u8 FSCPOS_REG_TEMP_STATE[] = { 0x71, 0x81, 0x91 }; - -/* - * Functions declaration - */ -static int fscpos_probe(struct i2c_client *client, - const struct i2c_device_id *id); -static int fscpos_detect(struct i2c_client *client, int kind, - struct i2c_board_info *info); -static int fscpos_remove(struct i2c_client *client); - -static int fscpos_read_value(struct i2c_client *client, u8 reg); -static int fscpos_write_value(struct i2c_client *client, u8 reg, u8 value); -static struct fscpos_data *fscpos_update_device(struct device *dev); -static void fscpos_init_client(struct i2c_client *client); - -static void reset_fan_alarm(struct i2c_client *client, int nr); - -/* - * Driver data (common to all clients) - */ -static const struct i2c_device_id fscpos_id[] = { - { "fscpos", fscpos }, - { } -}; - -static struct i2c_driver fscpos_driver = { - .class = I2C_CLASS_HWMON, - .driver = { - .name = "fscpos", - }, - .probe = fscpos_probe, - .remove = fscpos_remove, - .id_table = fscpos_id, - .detect = fscpos_detect, - .address_data = &addr_data, -}; - -/* - * Client data (each client gets its own) - */ -struct fscpos_data { - struct device *hwmon_dev; - struct mutex update_lock; - char valid; /* 0 until following fields are valid */ - unsigned long last_updated; /* In jiffies */ - - /* register values */ - u8 revision; /* revision of chip */ - u8 global_event; /* global event status */ - u8 global_control; /* global control register */ - u8 wdog_control; /* watchdog control */ - u8 wdog_state; /* watchdog status */ - u8 wdog_preset; /* watchdog preset */ - u8 volt[3]; /* 12, 5, battery current */ - u8 temp_act[3]; /* temperature */ - u8 temp_status[3]; /* status of sensor */ - u8 fan_act[3]; /* fans revolutions per second */ - u8 fan_status[3]; /* fan status */ - u8 pwm[2]; /* fan min value for rps */ - u8 fan_ripple[3]; /* divider for rps */ -}; - -/* Temperature */ -#define TEMP_FROM_REG(val) (((val) - 128) * 1000) - -static ssize_t show_temp_input(struct fscpos_data *data, char *buf, int nr) -{ - return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_act[nr - 1])); -} - -static ssize_t show_temp_status(struct fscpos_data *data, char *buf, int nr) -{ - /* bits 2..7 reserved => mask with 0x03 */ - return sprintf(buf, "%u\n", data->temp_status[nr - 1] & 0x03); -} - -static ssize_t show_temp_reset(struct fscpos_data *data, char *buf, int nr) -{ - return sprintf(buf, "1\n"); -} - -static ssize_t set_temp_reset(struct i2c_client *client, struct fscpos_data - *data, const char *buf, size_t count, int nr, int reg) -{ - unsigned long v = simple_strtoul(buf, NULL, 10); - if (v != 1) { - dev_err(&client->dev, "temp_reset value %ld not supported. " - "Use 1 to reset the alarm!\n", v); - return -EINVAL; - } - - dev_info(&client->dev, "You used the temp_reset feature which has not " - "been proplerly tested. Please report your " - "experience to the module author.\n"); - - /* Supported value: 2 (clears the status) */ - fscpos_write_value(client, FSCPOS_REG_TEMP_STATE[nr - 1], 2); - return count; -} - -/* Fans */ -#define RPM_FROM_REG(val) ((val) * 60) - -static ssize_t show_fan_status(struct fscpos_data *data, char *buf, int nr) -{ - /* bits 0..1, 3..7 reserved => mask with 0x04 */ - return sprintf(buf, "%u\n", data->fan_status[nr - 1] & 0x04); -} - -static ssize_t show_fan_input(struct fscpos_data *data, char *buf, int nr) -{ - return sprintf(buf, "%u\n", RPM_FROM_REG(data->fan_act[nr - 1])); -} - -static ssize_t show_fan_ripple(struct fscpos_data *data, char *buf, int nr) -{ - /* bits 2..7 reserved => mask with 0x03 */ - return sprintf(buf, "%u\n", data->fan_ripple[nr - 1] & 0x03); -} - -static ssize_t set_fan_ripple(struct i2c_client *client, struct fscpos_data - *data, const char *buf, size_t count, int nr, int reg) -{ - /* supported values: 2, 4, 8 */ - unsigned long v = simple_strtoul(buf, NULL, 10); - - switch (v) { - case 2: v = 1; break; - case 4: v = 2; break; - case 8: v = 3; break; - default: - dev_err(&client->dev, "fan_ripple value %ld not supported. " - "Must be one of 2, 4 or 8!\n", v); - return -EINVAL; - } - - mutex_lock(&data->update_lock); - /* bits 2..7 reserved => mask with 0x03 */ - data->fan_ripple[nr - 1] &= ~0x03; - data->fan_ripple[nr - 1] |= v; - - fscpos_write_value(client, reg, data->fan_ripple[nr - 1]); - mutex_unlock(&data->update_lock); - return count; -} - -static ssize_t show_pwm(struct fscpos_data *data, char *buf, int nr) -{ - return sprintf(buf, "%u\n", data->pwm[nr - 1]); -} - -static ssize_t set_pwm(struct i2c_client *client, struct fscpos_data *data, - const char *buf, size_t count, int nr, int reg) -{ - unsigned long v = simple_strtoul(buf, NULL, 10); - - /* Range: 0..255 */ - if (v < 0) v = 0; - if (v > 255) v = 255; - - mutex_lock(&data->update_lock); - data->pwm[nr - 1] = v; - fscpos_write_value(client, reg, data->pwm[nr - 1]); - mutex_unlock(&data->update_lock); - return count; -} - -static void reset_fan_alarm(struct i2c_client *client, int nr) -{ - fscpos_write_value(client, FSCPOS_REG_FAN_STATE[nr], 4); -} - -/* Volts */ -#define VOLT_FROM_REG(val, mult) ((val) * (mult) / 255) - -static ssize_t show_volt_12(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct fscpos_data *data = fscpos_update_device(dev); - return sprintf(buf, "%u\n", VOLT_FROM_REG(data->volt[0], 14200)); -} - -static ssize_t show_volt_5(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct fscpos_data *data = fscpos_update_device(dev); - return sprintf(buf, "%u\n", VOLT_FROM_REG(data->volt[1], 6600)); -} - -static ssize_t show_volt_batt(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct fscpos_data *data = fscpos_update_device(dev); - return sprintf(buf, "%u\n", VOLT_FROM_REG(data->volt[2], 3300)); -} - -/* Watchdog */ -static ssize_t show_wdog_control(struct fscpos_data *data, char *buf) -{ - /* bits 0..3 reserved, bit 6 write only => mask with 0xb0 */ - return sprintf(buf, "%u\n", data->wdog_control & 0xb0); -} - -static ssize_t set_wdog_control(struct i2c_client *client, struct fscpos_data - *data, const char *buf, size_t count, int reg) -{ - /* bits 0..3 reserved => mask with 0xf0 */ - unsigned long v = simple_strtoul(buf, NULL, 10) & 0xf0; - - mutex_lock(&data->update_lock); - data->wdog_control &= ~0xf0; - data->wdog_control |= v; - fscpos_write_value(client, reg, data->wdog_control); - mutex_unlock(&data->update_lock); - return count; -} - -static ssize_t show_wdog_state(struct fscpos_data *data, char *buf) -{ - /* bits 0, 2..7 reserved => mask with 0x02 */ - return sprintf(buf, "%u\n", data->wdog_state & 0x02); -} - -static ssize_t set_wdog_state(struct i2c_client *client, struct fscpos_data - *data, const char *buf, size_t count, int reg) -{ - unsigned long v = simple_strtoul(buf, NULL, 10) & 0x02; - - /* Valid values: 2 (clear) */ - if (v != 2) { - dev_err(&client->dev, "wdog_state value %ld not supported. " - "Must be 2 to clear the state!\n", v); - return -EINVAL; - } - - mutex_lock(&data->update_lock); - data->wdog_state &= ~v; - fscpos_write_value(client, reg, v); - mutex_unlock(&data->update_lock); - return count; -} - -static ssize_t show_wdog_preset(struct fscpos_data *data, char *buf) -{ - return sprintf(buf, "%u\n", data->wdog_preset); -} - -static ssize_t set_wdog_preset(struct i2c_client *client, struct fscpos_data - *data, const char *buf, size_t count, int reg) -{ - unsigned long v = simple_strtoul(buf, NULL, 10) & 0xff; - - mutex_lock(&data->update_lock); - data->wdog_preset = v; - fscpos_write_value(client, reg, data->wdog_preset); - mutex_unlock(&data->update_lock); - return count; -} - -/* Event */ -static ssize_t show_event(struct device *dev, struct device_attribute *attr, char *buf) -{ - /* bits 5..7 reserved => mask with 0x1f */ - struct fscpos_data *data = fscpos_update_device(dev); - return sprintf(buf, "%u\n", data->global_event & 0x9b); -} - -/* - * Sysfs stuff - */ -#define create_getter(kind, sub) \ - static ssize_t sysfs_show_##kind##sub(struct device *dev, struct device_attribute *attr, char *buf) \ - { \ - struct fscpos_data *data = fscpos_update_device(dev); \ - return show_##kind##sub(data, buf); \ - } - -#define create_getter_n(kind, offset, sub) \ - static ssize_t sysfs_show_##kind##offset##sub(struct device *dev, struct device_attribute *attr, char\ - *buf) \ - { \ - struct fscpos_data *data = fscpos_update_device(dev); \ - return show_##kind##sub(data, buf, offset); \ - } - -#define create_setter(kind, sub, reg) \ - static ssize_t sysfs_set_##kind##sub (struct device *dev, struct device_attribute *attr, const char \ - *buf, size_t count) \ - { \ - struct i2c_client *client = to_i2c_client(dev); \ - struct fscpos_data *data = i2c_get_clientdata(client); \ - return set_##kind##sub(client, data, buf, count, reg); \ - } - -#define create_setter_n(kind, offset, sub, reg) \ - static ssize_t sysfs_set_##kind##offset##sub (struct device *dev, struct device_attribute *attr, \ - const char *buf, size_t count) \ - { \ - struct i2c_client *client = to_i2c_client(dev); \ - struct fscpos_data *data = i2c_get_clientdata(client); \ - return set_##kind##sub(client, data, buf, count, offset, reg);\ - } - -#define create_sysfs_device_ro(kind, sub, offset) \ - static DEVICE_ATTR(kind##offset##sub, S_IRUGO, \ - sysfs_show_##kind##offset##sub, NULL); - -#define create_sysfs_device_rw(kind, sub, offset) \ - static DEVICE_ATTR(kind##offset##sub, S_IRUGO | S_IWUSR, \ - sysfs_show_##kind##offset##sub, sysfs_set_##kind##offset##sub); - -#define sysfs_ro_n(kind, sub, offset) \ - create_getter_n(kind, offset, sub); \ - create_sysfs_device_ro(kind, sub, offset); - -#define sysfs_rw_n(kind, sub, offset, reg) \ - create_getter_n(kind, offset, sub); \ - create_setter_n(kind, offset, sub, reg); \ - create_sysfs_device_rw(kind, sub, offset); - -#define sysfs_rw(kind, sub, reg) \ - create_getter(kind, sub); \ - create_setter(kind, sub, reg); \ - create_sysfs_device_rw(kind, sub,); - -#define sysfs_fan_with_min(offset, reg_status, reg_ripple, reg_min) \ - sysfs_fan(offset, reg_status, reg_ripple); \ - sysfs_rw_n(pwm,, offset, reg_min); - -#define sysfs_fan(offset, reg_status, reg_ripple) \ - sysfs_ro_n(fan, _input, offset); \ - sysfs_ro_n(fan, _status, offset); \ - sysfs_rw_n(fan, _ripple, offset, reg_ripple); - -#define sysfs_temp(offset, reg_status) \ - sysfs_ro_n(temp, _input, offset); \ - sysfs_ro_n(temp, _status, offset); \ - sysfs_rw_n(temp, _reset, offset, reg_status); - -#define sysfs_watchdog(reg_wdog_preset, reg_wdog_state, reg_wdog_control) \ - sysfs_rw(wdog, _control, reg_wdog_control); \ - sysfs_rw(wdog, _preset, reg_wdog_preset); \ - sysfs_rw(wdog, _state, reg_wdog_state); - -sysfs_fan_with_min(1, FSCPOS_REG_FAN_STATE[0], FSCPOS_REG_FAN_RIPPLE[0], - FSCPOS_REG_PWM[0]); -sysfs_fan_with_min(2, FSCPOS_REG_FAN_STATE[1], FSCPOS_REG_FAN_RIPPLE[1], - FSCPOS_REG_PWM[1]); -sysfs_fan(3, FSCPOS_REG_FAN_STATE[2], FSCPOS_REG_FAN_RIPPLE[2]); - -sysfs_temp(1, FSCPOS_REG_TEMP_STATE[0]); -sysfs_temp(2, FSCPOS_REG_TEMP_STATE[1]); -sysfs_temp(3, FSCPOS_REG_TEMP_STATE[2]); - -sysfs_watchdog(FSCPOS_REG_WDOG_PRESET, FSCPOS_REG_WDOG_STATE, - FSCPOS_REG_WDOG_CONTROL); - -static DEVICE_ATTR(event, S_IRUGO, show_event, NULL); -static DEVICE_ATTR(in0_input, S_IRUGO, show_volt_12, NULL); -static DEVICE_ATTR(in1_input, S_IRUGO, show_volt_5, NULL); -static DEVICE_ATTR(in2_input, S_IRUGO, show_volt_batt, NULL); - -static struct attribute *fscpos_attributes[] = { - &dev_attr_event.attr, - &dev_attr_in0_input.attr, - &dev_attr_in1_input.attr, - &dev_attr_in2_input.attr, - - &dev_attr_wdog_control.attr, - &dev_attr_wdog_preset.attr, - &dev_attr_wdog_state.attr, - - &dev_attr_temp1_input.attr, - &dev_attr_temp1_status.attr, - &dev_attr_temp1_reset.attr, - &dev_attr_temp2_input.attr, - &dev_attr_temp2_status.attr, - &dev_attr_temp2_reset.attr, - &dev_attr_temp3_input.attr, - &dev_attr_temp3_status.attr, - &dev_attr_temp3_reset.attr, - - &dev_attr_fan1_input.attr, - &dev_attr_fan1_status.attr, - &dev_attr_fan1_ripple.attr, - &dev_attr_pwm1.attr, - &dev_attr_fan2_input.attr, - &dev_attr_fan2_status.attr, - &dev_attr_fan2_ripple.attr, - &dev_attr_pwm2.attr, - &dev_attr_fan3_input.attr, - &dev_attr_fan3_status.attr, - &dev_attr_fan3_ripple.attr, - NULL -}; - -static const struct attribute_group fscpos_group = { - .attrs = fscpos_attributes, -}; - -/* Return 0 if detection is successful, -ENODEV otherwise */ -static int fscpos_detect(struct i2c_client *new_client, int kind, - struct i2c_board_info *info) -{ - struct i2c_adapter *adapter = new_client->adapter; - - if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) - return -ENODEV; - - /* Do the remaining detection unless force or force_fscpos parameter */ - if (kind < 0) { - if ((fscpos_read_value(new_client, FSCPOS_REG_IDENT_0) - != 0x50) /* 'P' */ - || (fscpos_read_value(new_client, FSCPOS_REG_IDENT_1) - != 0x45) /* 'E' */ - || (fscpos_read_value(new_client, FSCPOS_REG_IDENT_2) - != 0x47))/* 'G' */ - return -ENODEV; - } - - strlcpy(info->type, "fscpos", I2C_NAME_SIZE); - - return 0; -} - -static int fscpos_probe(struct i2c_client *new_client, - const struct i2c_device_id *id) -{ - struct fscpos_data *data; - int err; - - data = kzalloc(sizeof(struct fscpos_data), GFP_KERNEL); - if (!data) { - err = -ENOMEM; - goto exit; - } - - i2c_set_clientdata(new_client, data); - data->valid = 0; - mutex_init(&data->update_lock); - - /* Inizialize the fscpos chip */ - fscpos_init_client(new_client); - - /* Announce that the chip was found */ - dev_info(&new_client->dev, "Found fscpos chip, rev %u\n", data->revision); - - /* Register sysfs hooks */ - if ((err = sysfs_create_group(&new_client->dev.kobj, &fscpos_group))) - goto exit_free; - - data->hwmon_dev = hwmon_device_register(&new_client->dev); - if (IS_ERR(data->hwmon_dev)) { - err = PTR_ERR(data->hwmon_dev); - goto exit_remove_files; - } - - return 0; - -exit_remove_files: - sysfs_remove_group(&new_client->dev.kobj, &fscpos_group); -exit_free: - kfree(data); -exit: - return err; -} - -static int fscpos_remove(struct i2c_client *client) -{ - struct fscpos_data *data = i2c_get_clientdata(client); - - hwmon_device_unregister(data->hwmon_dev); - sysfs_remove_group(&client->dev.kobj, &fscpos_group); - - kfree(data); - return 0; -} - -static int fscpos_read_value(struct i2c_client *client, u8 reg) -{ - dev_dbg(&client->dev, "Read reg 0x%02x\n", reg); - return i2c_smbus_read_byte_data(client, reg); -} - -static int fscpos_write_value(struct i2c_client *client, u8 reg, u8 value) -{ - dev_dbg(&client->dev, "Write reg 0x%02x, val 0x%02x\n", reg, value); - return i2c_smbus_write_byte_data(client, reg, value); -} - -/* Called when we have found a new FSCPOS chip */ -static void fscpos_init_client(struct i2c_client *client) -{ - struct fscpos_data *data = i2c_get_clientdata(client); - - /* read revision from chip */ - data->revision = fscpos_read_value(client, FSCPOS_REG_REVISION); -} - -static struct fscpos_data *fscpos_update_device(struct device *dev) -{ - struct i2c_client *client = to_i2c_client(dev); - struct fscpos_data *data = i2c_get_clientdata(client); - - mutex_lock(&data->update_lock); - - if (time_after(jiffies, data->last_updated + 2 * HZ) || !data->valid) { - int i; - - dev_dbg(&client->dev, "Starting fscpos update\n"); - - for (i = 0; i < 3; i++) { - data->temp_act[i] = fscpos_read_value(client, - FSCPOS_REG_TEMP_ACT[i]); - data->temp_status[i] = fscpos_read_value(client, - FSCPOS_REG_TEMP_STATE[i]); - data->fan_act[i] = fscpos_read_value(client, - FSCPOS_REG_FAN_ACT[i]); - data->fan_status[i] = fscpos_read_value(client, - FSCPOS_REG_FAN_STATE[i]); - data->fan_ripple[i] = fscpos_read_value(client, - FSCPOS_REG_FAN_RIPPLE[i]); - if (i < 2) { - /* fan2_min is not supported by the chip */ - data->pwm[i] = fscpos_read_value(client, - FSCPOS_REG_PWM[i]); - } - /* reset fan status if speed is back to > 0 */ - if (data->fan_status[i] != 0 && data->fan_act[i] > 0) { - reset_fan_alarm(client, i); - } - } - - data->volt[0] = fscpos_read_value(client, FSCPOS_REG_VOLT_12); - data->volt[1] = fscpos_read_value(client, FSCPOS_REG_VOLT_5); - data->volt[2] = fscpos_read_value(client, FSCPOS_REG_VOLT_BATT); - - data->wdog_preset = fscpos_read_value(client, - FSCPOS_REG_WDOG_PRESET); - data->wdog_state = fscpos_read_value(client, - FSCPOS_REG_WDOG_STATE); - data->wdog_control = fscpos_read_value(client, - FSCPOS_REG_WDOG_CONTROL); - - data->global_event = fscpos_read_value(client, - FSCPOS_REG_EVENT_STATE); - - data->last_updated = jiffies; - data->valid = 1; - } - mutex_unlock(&data->update_lock); - return data; -} - -static int __init sm_fscpos_init(void) -{ - return i2c_add_driver(&fscpos_driver); -} - -static void __exit sm_fscpos_exit(void) -{ - i2c_del_driver(&fscpos_driver); -} - -MODULE_AUTHOR("Stefan Ott <stefan@desire.ch> based on work from Hermann Jung " - "<hej@odn.de>, Frodo Looijaard <frodol@dds.nl>" - " and Philip Edelbrock <phil@netroedge.com>"); -MODULE_DESCRIPTION("fujitsu siemens poseidon chip driver"); -MODULE_LICENSE("GPL"); - -module_init(sm_fscpos_init); -module_exit(sm_fscpos_exit); diff --git a/drivers/hwmon/ltc4215.c b/drivers/hwmon/ltc4215.c index 9386e2a3921..6c9a04136e0 100644 --- a/drivers/hwmon/ltc4215.c +++ b/drivers/hwmon/ltc4215.c @@ -259,7 +259,7 @@ static int ltc4215_probe(struct i2c_client *client, mutex_init(&data->update_lock); /* Initialize the LTC4215 chip */ - /* TODO */ + i2c_smbus_write_byte_data(client, LTC4215_FAULT, 0x00); /* Register sysfs hooks */ ret = sysfs_create_group(&client->dev.kobj, <c4215_group); diff --git a/drivers/hwmon/ltc4245.c b/drivers/hwmon/ltc4245.c index 034b2c51584..e3896433361 100644 --- a/drivers/hwmon/ltc4245.c +++ b/drivers/hwmon/ltc4245.c @@ -382,7 +382,8 @@ static int ltc4245_probe(struct i2c_client *client, mutex_init(&data->update_lock); /* Initialize the LTC4245 chip */ - /* TODO */ + i2c_smbus_write_byte_data(client, LTC4245_FAULT1, 0x00); + i2c_smbus_write_byte_data(client, LTC4245_FAULT2, 0x00); /* Register sysfs hooks */ ret = sysfs_create_group(&client->dev.kobj, <c4245_group); |