summaryrefslogtreecommitdiffstats
path: root/drivers
diff options
context:
space:
mode:
Diffstat (limited to 'drivers')
-rw-r--r--drivers/amba/bus.c26
-rw-r--r--drivers/hwmon/Kconfig17
-rw-r--r--drivers/hwmon/Makefile1
-rw-r--r--drivers/hwmon/s3c-hwmon.c405
-rw-r--r--drivers/input/touchscreen/w90p910_ts.c4
-rw-r--r--drivers/misc/Kconfig13
-rw-r--r--drivers/misc/Makefile1
-rw-r--r--drivers/misc/ep93xx_pwm.c384
-rw-r--r--drivers/mmc/host/mmci.c79
-rw-r--r--drivers/mmc/host/mmci.h2
-rw-r--r--drivers/mtd/nand/ts7250.c5
-rw-r--r--drivers/net/Kconfig2
-rw-r--r--drivers/serial/Kconfig9
-rw-r--r--drivers/serial/Makefile1
-rw-r--r--drivers/serial/amba-pl011.c26
-rw-r--r--drivers/serial/imx.c65
-rw-r--r--drivers/spi/amba-pl022.c2
-rw-r--r--drivers/video/Kconfig4
-rw-r--r--drivers/video/atmel_lcdfb.c6
-rw-r--r--drivers/video/backlight/Kconfig2
-rw-r--r--drivers/video/imxfb.c184
21 files changed, 1110 insertions, 128 deletions
diff --git a/drivers/amba/bus.c b/drivers/amba/bus.c
index 24665067301..f60b2b6a093 100644
--- a/drivers/amba/bus.c
+++ b/drivers/amba/bus.c
@@ -204,6 +204,7 @@ static void amba_device_release(struct device *dev)
int amba_device_register(struct amba_device *dev, struct resource *parent)
{
u32 pid, cid;
+ u32 size;
void __iomem *tmp;
int i, ret;
@@ -229,16 +230,25 @@ int amba_device_register(struct amba_device *dev, struct resource *parent)
if (ret)
goto err_out;
- tmp = ioremap(dev->res.start, SZ_4K);
+ /*
+ * Dynamically calculate the size of the resource
+ * and use this for iomap
+ */
+ size = resource_size(&dev->res);
+ tmp = ioremap(dev->res.start, size);
if (!tmp) {
ret = -ENOMEM;
goto err_release;
}
+ /*
+ * Read pid and cid based on size of resource
+ * they are located at end of region
+ */
for (pid = 0, i = 0; i < 4; i++)
- pid |= (readl(tmp + 0xfe0 + 4 * i) & 255) << (i * 8);
+ pid |= (readl(tmp + size - 0x20 + 4 * i) & 255) << (i * 8);
for (cid = 0, i = 0; i < 4; i++)
- cid |= (readl(tmp + 0xff0 + 4 * i) & 255) << (i * 8);
+ cid |= (readl(tmp + size - 0x10 + 4 * i) & 255) << (i * 8);
iounmap(tmp);
@@ -353,11 +363,14 @@ amba_find_device(const char *busid, struct device *parent, unsigned int id,
int amba_request_regions(struct amba_device *dev, const char *name)
{
int ret = 0;
+ u32 size;
if (!name)
name = dev->dev.driver->name;
- if (!request_mem_region(dev->res.start, SZ_4K, name))
+ size = resource_size(&dev->res);
+
+ if (!request_mem_region(dev->res.start, size, name))
ret = -EBUSY;
return ret;
@@ -371,7 +384,10 @@ int amba_request_regions(struct amba_device *dev, const char *name)
*/
void amba_release_regions(struct amba_device *dev)
{
- release_mem_region(dev->res.start, SZ_4K);
+ u32 size;
+
+ size = resource_size(&dev->res);
+ release_mem_region(dev->res.start, size);
}
EXPORT_SYMBOL(amba_driver_register);
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 2d5016691d4..2e25b7a827d 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -702,6 +702,23 @@ config SENSORS_SHT15
This driver can also be built as a module. If so, the module
will be called sht15.
+config SENSORS_S3C
+ tristate "S3C24XX/S3C64XX Inbuilt ADC"
+ depends on ARCH_S3C2410 || ARCH_S3C64XX
+ help
+ If you say yes here you get support for the on-board ADCs of
+ the Samsung S3C24XX or S3C64XX series of SoC
+
+ This driver can also be built as a module. If so, the module
+ will be called s3c-hwmo.
+
+config SENSORS_S3C_RAW
+ bool "Include raw channel attributes in sysfs"
+ depends on SENSORS_S3C
+ help
+ Say Y here if you want to include raw copies of all the ADC
+ channels in sysfs.
+
config SENSORS_SIS5595
tristate "Silicon Integrated Systems Corp. SiS5595"
depends on PCI
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index b793dce6bed..7f239a247c3 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -76,6 +76,7 @@ obj-$(CONFIG_SENSORS_MAX6650) += max6650.o
obj-$(CONFIG_SENSORS_PC87360) += pc87360.o
obj-$(CONFIG_SENSORS_PC87427) += pc87427.o
obj-$(CONFIG_SENSORS_PCF8591) += pcf8591.o
+obj-$(CONFIG_SENSORS_S3C) += s3c-hwmon.o
obj-$(CONFIG_SENSORS_SHT15) += sht15.o
obj-$(CONFIG_SENSORS_SIS5595) += sis5595.o
obj-$(CONFIG_SENSORS_SMSC47B397)+= smsc47b397.o
diff --git a/drivers/hwmon/s3c-hwmon.c b/drivers/hwmon/s3c-hwmon.c
new file mode 100644
index 00000000000..3a524f2fe49
--- /dev/null
+++ b/drivers/hwmon/s3c-hwmon.c
@@ -0,0 +1,405 @@
+/* linux/drivers/hwmon/s3c-hwmon.c
+ *
+ * Copyright (C) 2005, 2008, 2009 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C24XX/S3C64XX ADC hwmon support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+*/
+
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+
+#include <plat/adc.h>
+#include <plat/hwmon.h>
+
+struct s3c_hwmon_attr {
+ struct sensor_device_attribute in;
+ struct sensor_device_attribute label;
+ char in_name[12];
+ char label_name[12];
+};
+
+/**
+ * struct s3c_hwmon - ADC hwmon client information
+ * @lock: Access lock to serialise the conversions.
+ * @client: The client we registered with the S3C ADC core.
+ * @hwmon_dev: The hwmon device we created.
+ * @attr: The holders for the channel attributes.
+*/
+struct s3c_hwmon {
+ struct semaphore lock;
+ struct s3c_adc_client *client;
+ struct device *hwmon_dev;
+
+ struct s3c_hwmon_attr attrs[8];
+};
+
+/**
+ * s3c_hwmon_read_ch - read a value from a given adc channel.
+ * @dev: The device.
+ * @hwmon: Our state.
+ * @channel: The channel we're reading from.
+ *
+ * Read a value from the @channel with the proper locking and sleep until
+ * either the read completes or we timeout awaiting the ADC core to get
+ * back to us.
+ */
+static int s3c_hwmon_read_ch(struct device *dev,
+ struct s3c_hwmon *hwmon, int channel)
+{
+ int ret;
+
+ ret = down_interruptible(&hwmon->lock);
+ if (ret < 0)
+ return ret;
+
+ dev_dbg(dev, "reading channel %d\n", channel);
+
+ ret = s3c_adc_read(hwmon->client, channel);
+ up(&hwmon->lock);
+
+ return ret;
+}
+
+#ifdef CONFIG_SENSORS_S3C_RAW
+/**
+ * s3c_hwmon_show_raw - show a conversion from the raw channel number.
+ * @dev: The device that the attribute belongs to.
+ * @attr: The attribute being read.
+ * @buf: The result buffer.
+ *
+ * This show deals with the raw attribute, registered for each possible
+ * ADC channel. This does a conversion and returns the raw (un-scaled)
+ * value returned from the hardware.
+ */
+static ssize_t s3c_hwmon_show_raw(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct s3c_hwmon *adc = platform_get_drvdata(to_platform_device(dev));
+ struct sensor_device_attribute *sa = to_sensor_dev_attr(attr);
+ int ret;
+
+ ret = s3c_hwmon_read_ch(dev, adc, sa->index);
+
+ return (ret < 0) ? ret : snprintf(buf, PAGE_SIZE, "%d\n", ret);
+}
+
+#define DEF_ADC_ATTR(x) \
+ static SENSOR_DEVICE_ATTR(adc##x##_raw, S_IRUGO, s3c_hwmon_show_raw, NULL, x)
+
+DEF_ADC_ATTR(0);
+DEF_ADC_ATTR(1);
+DEF_ADC_ATTR(2);
+DEF_ADC_ATTR(3);
+DEF_ADC_ATTR(4);
+DEF_ADC_ATTR(5);
+DEF_ADC_ATTR(6);
+DEF_ADC_ATTR(7);
+
+static struct attribute *s3c_hwmon_attrs[9] = {
+ &sensor_dev_attr_adc0_raw.dev_attr.attr,
+ &sensor_dev_attr_adc1_raw.dev_attr.attr,
+ &sensor_dev_attr_adc2_raw.dev_attr.attr,
+ &sensor_dev_attr_adc3_raw.dev_attr.attr,
+ &sensor_dev_attr_adc4_raw.dev_attr.attr,
+ &sensor_dev_attr_adc5_raw.dev_attr.attr,
+ &sensor_dev_attr_adc6_raw.dev_attr.attr,
+ &sensor_dev_attr_adc7_raw.dev_attr.attr,
+ NULL,
+};
+
+static struct attribute_group s3c_hwmon_attrgroup = {
+ .attrs = s3c_hwmon_attrs,
+};
+
+static inline int s3c_hwmon_add_raw(struct device *dev)
+{
+ return sysfs_create_group(&dev->kobj, &s3c_hwmon_attrgroup);
+}
+
+static inline void s3c_hwmon_remove_raw(struct device *dev)
+{
+ sysfs_remove_group(&dev->kobj, &s3c_hwmon_attrgroup);
+}
+
+#else
+
+static inline int s3c_hwmon_add_raw(struct device *dev) { return 0; }
+static inline void s3c_hwmon_remove_raw(struct device *dev) { }
+
+#endif /* CONFIG_SENSORS_S3C_RAW */
+
+/**
+ * s3c_hwmon_ch_show - show value of a given channel
+ * @dev: The device that the attribute belongs to.
+ * @attr: The attribute being read.
+ * @buf: The result buffer.
+ *
+ * Read a value from the ADC and scale it before returning it to the
+ * caller. The scale factor is gained from the channel configuration
+ * passed via the platform data when the device was registered.
+ */
+static ssize_t s3c_hwmon_ch_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct sensor_device_attribute *sen_attr = to_sensor_dev_attr(attr);
+ struct s3c_hwmon *hwmon = platform_get_drvdata(to_platform_device(dev));
+ struct s3c_hwmon_pdata *pdata = dev->platform_data;
+ struct s3c_hwmon_chcfg *cfg;
+ int ret;
+
+ cfg = pdata->in[sen_attr->index];
+
+ ret = s3c_hwmon_read_ch(dev, hwmon, sen_attr->index);
+ if (ret < 0)
+ return ret;
+
+ ret *= cfg->mult;
+ ret = DIV_ROUND_CLOSEST(ret, cfg->div);
+
+ return snprintf(buf, PAGE_SIZE, "%d\n", ret);
+}
+
+/**
+ * s3c_hwmon_label_show - show label name of the given channel.
+ * @dev: The device that the attribute belongs to.
+ * @attr: The attribute being read.
+ * @buf: The result buffer.
+ *
+ * Return the label name of a given channel
+ */
+static ssize_t s3c_hwmon_label_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct sensor_device_attribute *sen_attr = to_sensor_dev_attr(attr);
+ struct s3c_hwmon_pdata *pdata = dev->platform_data;
+ struct s3c_hwmon_chcfg *cfg;
+
+ cfg = pdata->in[sen_attr->index];
+
+ return snprintf(buf, PAGE_SIZE, "%s\n", cfg->name);
+}
+
+/**
+ * s3c_hwmon_create_attr - create hwmon attribute for given channel.
+ * @dev: The device to create the attribute on.
+ * @cfg: The channel configuration passed from the platform data.
+ * @channel: The ADC channel number to process.
+ *
+ * Create the scaled attribute for use with hwmon from the specified
+ * platform data in @pdata. The sysfs entry is handled by the routine
+ * s3c_hwmon_ch_show().
+ *
+ * The attribute name is taken from the configuration data if present
+ * otherwise the name is taken by concatenating in_ with the channel
+ * number.
+ */
+static int s3c_hwmon_create_attr(struct device *dev,
+ struct s3c_hwmon_chcfg *cfg,
+ struct s3c_hwmon_attr *attrs,
+ int channel)
+{
+ struct sensor_device_attribute *attr;
+ int ret;
+
+ snprintf(attrs->in_name, sizeof(attrs->in_name), "in%d_input", channel);
+
+ attr = &attrs->in;
+ attr->index = channel;
+ attr->dev_attr.attr.name = attrs->in_name;
+ attr->dev_attr.attr.mode = S_IRUGO;
+ attr->dev_attr.attr.owner = THIS_MODULE;
+ attr->dev_attr.show = s3c_hwmon_ch_show;
+
+ ret = device_create_file(dev, &attr->dev_attr);
+ if (ret < 0) {
+ dev_err(dev, "failed to create input attribute\n");
+ return ret;
+ }
+
+ /* if this has a name, add a label */
+ if (cfg->name) {
+ snprintf(attrs->label_name, sizeof(attrs->label_name),
+ "in%d_label", channel);
+
+ attr = &attrs->label;
+ attr->index = channel;
+ attr->dev_attr.attr.name = attrs->label_name;
+ attr->dev_attr.attr.mode = S_IRUGO;
+ attr->dev_attr.attr.owner = THIS_MODULE;
+ attr->dev_attr.show = s3c_hwmon_label_show;
+
+ ret = device_create_file(dev, &attr->dev_attr);
+ if (ret < 0) {
+ device_remove_file(dev, &attrs->in.dev_attr);
+ dev_err(dev, "failed to create label attribute\n");
+ }
+ }
+
+ return ret;
+}
+
+static void s3c_hwmon_remove_attr(struct device *dev,
+ struct s3c_hwmon_attr *attrs)
+{
+ device_remove_file(dev, &attrs->in.dev_attr);
+ device_remove_file(dev, &attrs->label.dev_attr);
+}
+
+/**
+ * s3c_hwmon_probe - device probe entry.
+ * @dev: The device being probed.
+*/
+static int __devinit s3c_hwmon_probe(struct platform_device *dev)
+{
+ struct s3c_hwmon_pdata *pdata = dev->dev.platform_data;
+ struct s3c_hwmon *hwmon;
+ int ret = 0;
+ int i;
+
+ if (!pdata) {
+ dev_err(&dev->dev, "no platform data supplied\n");
+ return -EINVAL;
+ }
+
+ hwmon = kzalloc(sizeof(struct s3c_hwmon), GFP_KERNEL);
+ if (hwmon == NULL) {
+ dev_err(&dev->dev, "no memory\n");
+ return -ENOMEM;
+ }
+
+ platform_set_drvdata(dev, hwmon);
+
+ init_MUTEX(&hwmon->lock);
+
+ /* Register with the core ADC driver. */
+
+ hwmon->client = s3c_adc_register(dev, NULL, NULL, 0);
+ if (IS_ERR(hwmon->client)) {
+ dev_err(&dev->dev, "cannot register adc\n");
+ ret = PTR_ERR(hwmon->client);
+ goto err_mem;
+ }
+
+ /* add attributes for our adc devices. */
+
+ ret = s3c_hwmon_add_raw(&dev->dev);
+ if (ret)
+ goto err_registered;
+
+ /* register with the hwmon core */
+
+ hwmon->hwmon_dev = hwmon_device_register(&dev->dev);
+ if (IS_ERR(hwmon->hwmon_dev)) {
+ dev_err(&dev->dev, "error registering with hwmon\n");
+ ret = PTR_ERR(hwmon->hwmon_dev);
+ goto err_raw_attribute;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(pdata->in); i++) {
+ if (!pdata->in[i])
+ continue;
+
+ if (pdata->in[i]->mult >= 0x10000)
+ dev_warn(&dev->dev,
+ "channel %d multiplier too large\n",
+ i);
+
+ ret = s3c_hwmon_create_attr(&dev->dev, pdata->in[i],
+ &hwmon->attrs[i], i);
+ if (ret) {
+ dev_err(&dev->dev,
+ "error creating channel %d\n", i);
+
+ for (i--; i >= 0; i--)
+ s3c_hwmon_remove_attr(&dev->dev,
+ &hwmon->attrs[i]);
+
+ goto err_hwmon_register;
+ }
+ }
+
+ return 0;
+
+ err_hwmon_register:
+ hwmon_device_unregister(hwmon->hwmon_dev);
+
+ err_raw_attribute:
+ s3c_hwmon_remove_raw(&dev->dev);
+
+ err_registered:
+ s3c_adc_release(hwmon->client);
+
+ err_mem:
+ kfree(hwmon);
+ return ret;
+}
+
+static int __devexit s3c_hwmon_remove(struct platform_device *dev)
+{
+ struct s3c_hwmon *hwmon = platform_get_drvdata(dev);
+ int i;
+
+ s3c_hwmon_remove_raw(&dev->dev);
+
+ for (i = 0; i < ARRAY_SIZE(hwmon->attrs); i++)
+ s3c_hwmon_remove_attr(&dev->dev, &hwmon->attrs[i]);
+
+ hwmon_device_unregister(hwmon->hwmon_dev);
+ s3c_adc_release(hwmon->client);
+
+ return 0;
+}
+
+static struct platform_driver s3c_hwmon_driver = {
+ .driver = {
+ .name = "s3c-hwmon",
+ .owner = THIS_MODULE,
+ },
+ .probe = s3c_hwmon_probe,
+ .remove = __devexit_p(s3c_hwmon_remove),
+};
+
+static int __init s3c_hwmon_init(void)
+{
+ return platform_driver_register(&s3c_hwmon_driver);
+}
+
+static void __exit s3c_hwmon_exit(void)
+{
+ platform_driver_unregister(&s3c_hwmon_driver);
+}
+
+module_init(s3c_hwmon_init);
+module_exit(s3c_hwmon_exit);
+
+MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
+MODULE_DESCRIPTION("S3C ADC HWMon driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:s3c-hwmon");
diff --git a/drivers/input/touchscreen/w90p910_ts.c b/drivers/input/touchscreen/w90p910_ts.c
index 6071f588257..937dfe4e9b1 100644
--- a/drivers/input/touchscreen/w90p910_ts.c
+++ b/drivers/input/touchscreen/w90p910_ts.c
@@ -326,7 +326,7 @@ static struct platform_driver w90x900ts_driver = {
.probe = w90x900ts_probe,
.remove = __devexit_p(w90x900ts_remove),
.driver = {
- .name = "w90x900-ts",
+ .name = "nuc900-ts",
.owner = THIS_MODULE,
},
};
@@ -347,4 +347,4 @@ module_exit(w90x900ts_exit);
MODULE_AUTHOR("Wan ZongShun <mcuos.com@gmail.com>");
MODULE_DESCRIPTION("w90p910 touch screen driver!");
MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:w90p910-ts");
+MODULE_ALIAS("platform:nuc900-ts");
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index 68ab39d7cb3..df1f86b5c83 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -233,6 +233,19 @@ config ISL29003
This driver can also be built as a module. If so, the module
will be called isl29003.
+config EP93XX_PWM
+ tristate "EP93xx PWM support"
+ depends on ARCH_EP93XX
+ help
+ This option enables device driver support for the PWM channels
+ on the Cirrus EP93xx processors. The EP9307 chip only has one
+ PWM channel all the others have two, the second channel is an
+ alternate function of the EGPIO14 pin. A sysfs interface is
+ provided to control the PWM channels.
+
+ To compile this driver as a module, choose M here: the module will
+ be called ep93xx_pwm.
+
source "drivers/misc/c2port/Kconfig"
source "drivers/misc/eeprom/Kconfig"
source "drivers/misc/cb710/Kconfig"
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index 36f733cd60e..f982d2ecfde 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -19,6 +19,7 @@ obj-$(CONFIG_SGI_XP) += sgi-xp/
obj-$(CONFIG_SGI_GRU) += sgi-gru/
obj-$(CONFIG_HP_ILO) += hpilo.o
obj-$(CONFIG_ISL29003) += isl29003.o
+obj-$(CONFIG_EP93XX_PWM) += ep93xx_pwm.o
obj-$(CONFIG_C2PORT) += c2port/
obj-y += eeprom/
obj-y += cb710/
diff --git a/drivers/misc/ep93xx_pwm.c b/drivers/misc/ep93xx_pwm.c
new file mode 100644
index 00000000000..ba4694169d7
--- /dev/null
+++ b/drivers/misc/ep93xx_pwm.c
@@ -0,0 +1,384 @@
+/*
+ * Simple PWM driver for EP93XX
+ *
+ * (c) Copyright 2009 Matthieu Crapet <mcrapet@gmail.com>
+ * (c) Copyright 2009 H Hartley Sweeten <hsweeten@visionengravers.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * EP9307 has only one channel:
+ * - PWMOUT
+ *
+ * EP9301/02/12/15 have two channels:
+ * - PWMOUT
+ * - PWMOUT1 (alternate function for EGPIO14)
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+
+#include <mach/platform.h>
+
+#define EP93XX_PWMx_TERM_COUNT 0x00
+#define EP93XX_PWMx_DUTY_CYCLE 0x04
+#define EP93XX_PWMx_ENABLE 0x08
+#define EP93XX_PWMx_INVERT 0x0C
+
+#define EP93XX_PWM_MAX_COUNT 0xFFFF
+
+struct ep93xx_pwm {
+ void __iomem *mmio_base;
+ struct clk *clk;
+ u32 duty_percent;
+};
+
+static inline void ep93xx_pwm_writel(struct ep93xx_pwm *pwm,
+ unsigned int val, unsigned int off)
+{
+ __raw_writel(val, pwm->mmio_base + off);
+}
+
+static inline unsigned int ep93xx_pwm_readl(struct ep93xx_pwm *pwm,
+ unsigned int off)
+{
+ return __raw_readl(pwm->mmio_base + off);
+}
+
+static inline void ep93xx_pwm_write_tc(struct ep93xx_pwm *pwm, u16 value)
+{
+ ep93xx_pwm_writel(pwm, value, EP93XX_PWMx_TERM_COUNT);
+}
+
+static inline u16 ep93xx_pwm_read_tc(struct ep93xx_pwm *pwm)
+{
+ return ep93xx_pwm_readl(pwm, EP93XX_PWMx_TERM_COUNT);
+}
+
+static inline void ep93xx_pwm_write_dc(struct ep93xx_pwm *pwm, u16 value)
+{
+ ep93xx_pwm_writel(pwm, value, EP93XX_PWMx_DUTY_CYCLE);
+}
+
+static inline void ep93xx_pwm_enable(struct ep93xx_pwm *pwm)
+{
+ ep93xx_pwm_writel(pwm, 0x1, EP93XX_PWMx_ENABLE);
+}
+
+static inline void ep93xx_pwm_disable(struct ep93xx_pwm *pwm)
+{
+ ep93xx_pwm_writel(pwm, 0x0, EP93XX_PWMx_ENABLE);
+}
+
+static inline int ep93xx_pwm_is_enabled(struct ep93xx_pwm *pwm)
+{
+ return ep93xx_pwm_readl(pwm, EP93XX_PWMx_ENABLE) & 0x1;
+}
+
+static inline void ep93xx_pwm_invert(struct ep93xx_pwm *pwm)
+{
+ ep93xx_pwm_writel(pwm, 0x1, EP93XX_PWMx_INVERT);
+}
+
+static inline void ep93xx_pwm_normal(struct ep93xx_pwm *pwm)
+{
+ ep93xx_pwm_writel(pwm, 0x0, EP93XX_PWMx_INVERT);
+}
+
+static inline int ep93xx_pwm_is_inverted(struct ep93xx_pwm *pwm)
+{
+ return ep93xx_pwm_readl(pwm, EP93XX_PWMx_INVERT) & 0x1;
+}
+
+/*
+ * /sys/devices/platform/ep93xx-pwm.N
+ * /min_freq read-only minimum pwm output frequency
+ * /max_req read-only maximum pwm output frequency
+ * /freq read-write pwm output frequency (0 = disable output)
+ * /duty_percent read-write pwm duty cycle percent (1..99)
+ * /invert read-write invert pwm output
+ */
+
+static ssize_t ep93xx_pwm_get_min_freq(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct ep93xx_pwm *pwm = platform_get_drvdata(pdev);
+ unsigned long rate = clk_get_rate(pwm->clk);
+
+ return sprintf(buf, "%ld\n", rate / (EP93XX_PWM_MAX_COUNT + 1));
+}
+
+static ssize_t ep93xx_pwm_get_max_freq(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct ep93xx_pwm *pwm = platform_get_drvdata(pdev);
+ unsigned long rate = clk_get_rate(pwm->clk);
+
+ return sprintf(buf, "%ld\n", rate / 2);
+}
+
+static ssize_t ep93xx_pwm_get_freq(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct ep93xx_pwm *pwm = platform_get_drvdata(pdev);
+
+ if (ep93xx_pwm_is_enabled(pwm)) {
+ unsigned long rate = clk_get_rate(pwm->clk);
+ u16 term = ep93xx_pwm_read_tc(pwm);
+
+ return sprintf(buf, "%ld\n", rate / (term + 1));
+ } else {
+ return sprintf(buf, "disabled\n");
+ }
+}
+
+static ssize_t ep93xx_pwm_set_freq(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct ep93xx_pwm *pwm = platform_get_drvdata(pdev);
+ long val;
+ int err;
+
+ err = strict_strtol(buf, 10, &val);
+ if (err)
+ return -EINVAL;
+
+ if (val == 0) {
+ ep93xx_pwm_disable(pwm);
+ } else if (val <= (clk_get_rate(pwm->clk) / 2)) {
+ u32 term, duty;
+
+ val = (clk_get_rate(pwm->clk) / val) - 1;
+ if (val > EP93XX_PWM_MAX_COUNT)
+ val = EP93XX_PWM_MAX_COUNT;
+ if (val < 1)
+ val = 1;
+
+ term = ep93xx_pwm_read_tc(pwm);
+ duty = ((val + 1) * pwm->duty_percent / 100) - 1;
+
+ /* If pwm is running, order is important */
+ if (val > term) {
+ ep93xx_pwm_write_tc(pwm, val);
+ ep93xx_pwm_write_dc(pwm, duty);
+ } else {
+ ep93xx_pwm_write_dc(pwm, duty);
+ ep93xx_pwm_write_tc(pwm, val);
+ }
+
+ if (!ep93xx_pwm_is_enabled(pwm))
+ ep93xx_pwm_enable(pwm);
+ } else {
+ return -EINVAL;
+ }
+
+ return count;
+}
+
+static ssize_t ep93xx_pwm_get_duty_percent(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct ep93xx_pwm *pwm = platform_get_drvdata(pdev);
+
+ return sprintf(buf, "%d\n", pwm->duty_percent);
+}
+
+static ssize_t ep93xx_pwm_set_duty_percent(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct ep93xx_pwm *pwm = platform_get_drvdata(pdev);
+ long val;
+ int err;
+
+ err = strict_strtol(buf, 10, &val);
+ if (err)
+ return -EINVAL;
+
+ if (val > 0 && val < 100) {
+ u32 term = ep93xx_pwm_read_tc(pwm);
+ ep93xx_pwm_write_dc(pwm, ((term + 1) * val / 100) - 1);
+ pwm->duty_percent = val;
+ return count;
+ }
+
+ return -EINVAL;
+}
+
+static ssize_t ep93xx_pwm_get_invert(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct ep93xx_pwm *pwm = platform_get_drvdata(pdev);
+
+ return sprintf(buf, "%d\n", ep93xx_pwm_is_inverted(pwm));
+}
+
+static ssize_t ep93xx_pwm_set_invert(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct ep93xx_pwm *pwm = platform_get_drvdata(pdev);
+ long val;
+ int err;
+
+ err = strict_strtol(buf, 10, &val);
+ if (err)
+ return -EINVAL;
+
+ if (val == 0)
+ ep93xx_pwm_normal(pwm);
+ else if (val == 1)
+ ep93xx_pwm_invert(pwm);
+ else
+ return -EINVAL;
+
+ return count;
+}
+
+static DEVICE_ATTR(min_freq, S_IRUGO, ep93xx_pwm_get_min_freq, NULL);
+static DEVICE_ATTR(max_freq, S_IRUGO, ep93xx_pwm_get_max_freq, NULL);
+static DEVICE_ATTR(freq, S_IWUGO | S_IRUGO,
+ ep93xx_pwm_get_freq, ep93xx_pwm_set_freq);
+static DEVICE_ATTR(duty_percent, S_IWUGO | S_IRUGO,
+ ep93xx_pwm_get_duty_percent, ep93xx_pwm_set_duty_percent);
+static DEVICE_ATTR(invert, S_IWUGO | S_IRUGO,
+ ep93xx_pwm_get_invert, ep93xx_pwm_set_invert);
+
+static struct attribute *ep93xx_pwm_attrs[] = {
+ &dev_attr_min_freq.attr,
+ &dev_attr_max_freq.attr,
+ &dev_attr_freq.attr,
+ &dev_attr_duty_percent.attr,
+ &dev_attr_invert.attr,
+ NULL
+};
+
+static const struct attribute_group ep93xx_pwm_sysfs_files = {
+ .attrs = ep93xx_pwm_attrs,
+};
+
+static int __init ep93xx_pwm_probe(struct platform_device *pdev)
+{
+ struct ep93xx_pwm *pwm;
+ struct resource *res;
+ int err;
+
+ err = ep93xx_pwm_acquire_gpio(pdev);
+ if (err)
+ return err;
+
+ pwm = kzalloc(sizeof(struct ep93xx_pwm), GFP_KERNEL);
+ if (!pwm) {
+ err = -ENOMEM;
+ goto fail_no_mem;
+ }
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (res == NULL) {
+ err = -ENXIO;
+ goto fail_no_mem_resource;
+ }
+
+ res = request_mem_region(res->start, resource_size(res), pdev->name);
+ if (res == NULL) {
+ err = -EBUSY;
+ goto fail_no_mem_resource;
+ }
+
+ pwm->mmio_base = ioremap(res->start, resource_size(res));
+ if (pwm->mmio_base == NULL) {
+ err = -ENXIO;
+ goto fail_no_ioremap;
+ }
+
+ err = sysfs_create_group(&pdev->dev.kobj, &ep93xx_pwm_sysfs_files);
+ if (err)
+ goto fail_no_sysfs;
+
+ pwm->clk = clk_get(&pdev->dev, "pwm_clk");
+ if (IS_ERR(pwm->clk)) {
+ err = PTR_ERR(pwm->clk);
+ goto fail_no_clk;
+ }
+
+ pwm->duty_percent = 50;
+
+ platform_set_drvdata(pdev, pwm);
+
+ /* disable pwm at startup. Avoids zero value. */
+ ep93xx_pwm_disable(pwm);
+ ep93xx_pwm_write_tc(pwm, EP93XX_PWM_MAX_COUNT);
+ ep93xx_pwm_write_dc(pwm, EP93XX_PWM_MAX_COUNT / 2);
+
+ clk_enable(pwm->clk);
+
+ return 0;
+
+fail_no_clk:
+ sysfs_remove_group(&pdev->dev.kobj, &ep93xx_pwm_sysfs_files);
+fail_no_sysfs:
+ iounmap(pwm->mmio_base);
+fail_no_ioremap:
+ release_mem_region(res->start, resource_size(res));
+fail_no_mem_resource:
+ kfree(pwm);
+fail_no_mem:
+ ep93xx_pwm_release_gpio(pdev);
+ return err;
+}
+
+static int __exit ep93xx_pwm_remove(struct platform_device *pdev)
+{
+ struct ep93xx_pwm *pwm = platform_get_drvdata(pdev);
+ struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+
+ ep93xx_pwm_disable(pwm);
+ clk_disable(pwm->clk);
+ clk_put(pwm->clk);
+ platform_set_drvdata(pdev, NULL);
+ sysfs_remove_group(&pdev->dev.kobj, &ep93xx_pwm_sysfs_files);
+ iounmap(pwm->mmio_base);
+ release_mem_region(res->start, resource_size(res));
+ kfree(pwm);
+ ep93xx_pwm_release_gpio(pdev);
+
+ return 0;
+}
+
+static struct platform_driver ep93xx_pwm_driver = {
+ .driver = {
+ .name = "ep93xx-pwm",
+ .owner = THIS_MODULE,
+ },
+ .remove = __exit_p(ep93xx_pwm_remove),
+};
+
+static int __init ep93xx_pwm_init(void)
+{
+ return platform_driver_probe(&ep93xx_pwm_driver, ep93xx_pwm_probe);
+}
+
+static void __exit ep93xx_pwm_exit(void)
+{
+ platform_driver_unregister(&ep93xx_pwm_driver);
+}
+
+module_init(ep93xx_pwm_init);
+module_exit(ep93xx_pwm_exit);
+
+MODULE_AUTHOR("Matthieu Crapet <mcrapet@gmail.com>, "
+ "H Hartley Sweeten <hsweeten@visionengravers.com>");
+MODULE_DESCRIPTION("EP93xx PWM driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:ep93xx-pwm");
diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index e1aa8471ab1..8741d0f5146 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -21,6 +21,7 @@
#include <linux/amba/bus.h>
#include <linux/clk.h>
#include <linux/scatterlist.h>
+#include <linux/gpio.h>
#include <asm/cacheflush.h>
#include <asm/div64.h>
@@ -430,7 +431,7 @@ static void mmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
clk = 255;
host->cclk = host->mclk / (2 * (clk + 1));
}
- if (host->hw_designer == 0x80)
+ if (host->hw_designer == AMBA_VENDOR_ST)
clk |= MCI_FCEN; /* Bug fix in ST IP block */
clk |= MCI_CLK_ENABLE;
}
@@ -443,7 +444,7 @@ static void mmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
break;
case MMC_POWER_UP:
/* The ST version does not have this, fall through to POWER_ON */
- if (host->hw_designer != 0x80) {
+ if (host->hw_designer != AMBA_VENDOR_ST) {
pwr |= MCI_PWR_UP;
break;
}
@@ -453,7 +454,7 @@ static void mmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
}
if (ios->bus_mode == MMC_BUSMODE_OPENDRAIN) {
- if (host->hw_designer != 0x80)
+ if (host->hw_designer != AMBA_VENDOR_ST)
pwr |= MCI_ROD;
else {
/*
@@ -472,17 +473,41 @@ static void mmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
}
}
+static int mmci_get_ro(struct mmc_host *mmc)
+{
+ struct mmci_host *host = mmc_priv(mmc);
+
+ if (host->gpio_wp == -ENOSYS)
+ return -ENOSYS;
+
+ return gpio_get_value(host->gpio_wp);
+}
+
+static int mmci_get_cd(struct mmc_host *mmc)
+{
+ struct mmci_host *host = mmc_priv(mmc);
+ unsigned int status;
+
+ if (host->gpio_cd == -ENOSYS)
+ status = host->plat->status(mmc_dev(host->mmc));
+ else
+ status = gpio_get_value(host->gpio_cd);
+
+ return !status;
+}
+
static const struct mmc_host_ops mmci_ops = {
.request = mmci_request,
.set_ios = mmci_set_ios,
+ .get_ro = mmci_get_ro,
+ .get_cd = mmci_get_cd,
};
static void mmci_check_status(unsigned long data)
{
struct mmci_host *host = (struct mmci_host *)data;
- unsigned int status;
+ unsigned int status = mmci_get_cd(host->mmc);
- status = host->plat->status(mmc_dev(host->mmc));
if (status ^ host->oldstat)
mmc_detect_change(host->mmc, 0);
@@ -515,12 +540,15 @@ static int __devinit mmci_probe(struct amba_device *dev, struct amba_id *id)
host = mmc_priv(mmc);
host->mmc = mmc;
- /* Bits 12 thru 19 is the designer */
- host->hw_designer = (dev->periphid >> 12) & 0xff;
- /* Bits 20 thru 23 is the revison */
- host->hw_revision = (dev->periphid >> 20) & 0xf;
+
+ host->gpio_wp = -ENOSYS;
+ host->gpio_cd = -ENOSYS;
+
+ host->hw_designer = amba_manf(dev);
+ host->hw_revision = amba_rev(dev);
DBG(host, "designer ID = 0x%02x\n", host->hw_designer);
DBG(host, "revision = 0x%01x\n", host->hw_revision);
+
host->clk = clk_get(&dev->dev, NULL);
if (IS_ERR(host->clk)) {
ret = PTR_ERR(host->clk);
@@ -591,6 +619,27 @@ static int __devinit mmci_probe(struct amba_device *dev, struct amba_id *id)
writel(0, host->base + MMCIMASK1);
writel(0xfff, host->base + MMCICLEAR);
+#ifdef CONFIG_GPIOLIB
+ if (gpio_is_valid(plat->gpio_cd)) {
+ ret = gpio_request(plat->gpio_cd, DRIVER_NAME " (cd)");
+ if (ret == 0)
+ ret = gpio_direction_input(plat->gpio_cd);
+ if (ret == 0)
+ host->gpio_cd = plat->gpio_cd;
+ else if (ret != -ENOSYS)
+ goto err_gpio_cd;
+ }
+ if (gpio_is_valid(plat->gpio_wp)) {
+ ret = gpio_request(plat->gpio_wp, DRIVER_NAME " (wp)");
+ if (ret == 0)
+ ret = gpio_direction_input(plat->gpio_wp);
+ if (ret == 0)
+ host->gpio_wp = plat->gpio_wp;
+ else if (ret != -ENOSYS)
+ goto err_gpio_wp;
+ }
+#endif
+
ret = request_irq(dev->irq[0], mmci_irq, IRQF_SHARED, DRIVER_NAME " (cmd)", host);
if (ret)
goto unmap;
@@ -602,6 +651,7 @@ static int __devinit mmci_probe(struct amba_device *dev, struct amba_id *id)
writel(MCI_IRQENABLE, host->base + MMCIMASK0);
amba_set_drvdata(dev, mmc);
+ host->oldstat = mmci_get_cd(host->mmc);
mmc_add_host(mmc);
@@ -620,6 +670,12 @@ static int __devinit mmci_probe(struct amba_device *dev, struct amba_id *id)
irq0_free:
free_irq(dev->irq[0], host);
unmap:
+ if (host->gpio_wp != -ENOSYS)
+ gpio_free(host->gpio_wp);
+ err_gpio_wp:
+ if (host->gpio_cd != -ENOSYS)
+ gpio_free(host->gpio_cd);
+ err_gpio_cd:
iounmap(host->base);
clk_disable:
clk_disable(host->clk);
@@ -655,6 +711,11 @@ static int __devexit mmci_remove(struct amba_device *dev)
free_irq(dev->irq[0], host);
free_irq(dev->irq[1], host);
+ if (host->gpio_wp != -ENOSYS)
+ gpio_free(host->gpio_wp);
+ if (host->gpio_cd != -ENOSYS)
+ gpio_free(host->gpio_cd);
+
iounmap(host->base);
clk_disable(host->clk);
clk_put(host->clk);
diff --git a/drivers/mmc/host/mmci.h b/drivers/mmc/host/mmci.h
index 0441bac1c0e..839f264c972 100644
--- a/drivers/mmc/host/mmci.h
+++ b/drivers/mmc/host/mmci.h
@@ -151,6 +151,8 @@ struct mmci_host {
struct mmc_data *data;
struct mmc_host *mmc;
struct clk *clk;
+ int gpio_cd;
+ int gpio_wp;
unsigned int data_xfered;
diff --git a/drivers/mtd/nand/ts7250.c b/drivers/mtd/nand/ts7250.c
index 2c410a01131..0f5562aeedc 100644
--- a/drivers/mtd/nand/ts7250.c
+++ b/drivers/mtd/nand/ts7250.c
@@ -24,8 +24,11 @@
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
-#include <asm/io.h>
+#include <linux/io.h>
+
#include <mach/hardware.h>
+#include <mach/ts72xx.h>
+
#include <asm/sizes.h>
#include <asm/mach-types.h>
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 5ce7cbabd7a..985a0550c80 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -209,7 +209,7 @@ config MII
config MACB
tristate "Atmel MACB support"
- depends on AVR32 || ARCH_AT91SAM9260 || ARCH_AT91SAM9263 || ARCH_AT91SAM9G20 || ARCH_AT91CAP9
+ depends on AVR32 || ARCH_AT91SAM9260 || ARCH_AT91SAM9263 || ARCH_AT91SAM9G20 || ARCH_AT91SAM9G45 || ARCH_AT91CAP9
select PHYLIB
help
The Atmel MACB ethernet interface is found on many AT32 and AT91
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 6553833c12d..03422ce878c 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -459,7 +459,7 @@ config SERIAL_SAMSUNG_UARTS
int
depends on ARM && PLAT_S3C
default 2 if ARCH_S3C2400
- default 4 if ARCH_S3C64XX || CPU_S3C2443
+ default 4 if ARCH_S5PC1XX || ARCH_S3C64XX || CPU_S3C2443
default 3
help
Select the number of available UART ports for the Samsung S3C
@@ -533,6 +533,13 @@ config SERIAL_S3C6400
Serial port support for the Samsung S3C6400 and S3C6410
SoCs
+config SERIAL_S5PC100
+ tristate "Samsung S5PC100 Serial port support"
+ depends on SERIAL_SAMSUNG && CPU_S5PC100
+ default y
+ help
+ Serial port support for the Samsung S5PC100 SoCs
+
config SERIAL_MAX3100
tristate "MAX3100 support"
depends on SPI
diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
index d5a29981c6c..97f6fcc8b43 100644
--- a/drivers/serial/Makefile
+++ b/drivers/serial/Makefile
@@ -43,6 +43,7 @@ obj-$(CONFIG_SERIAL_S3C2412) += s3c2412.o
obj-$(CONFIG_SERIAL_S3C2440) += s3c2440.o
obj-$(CONFIG_SERIAL_S3C24A0) += s3c24a0.o
obj-$(CONFIG_SERIAL_S3C6400) += s3c6400.o
+obj-$(CONFIG_SERIAL_S5PC100) += s3c6400.o
obj-$(CONFIG_SERIAL_MAX3100) += max3100.o
obj-$(CONFIG_SERIAL_IP22_ZILOG) += ip22zilog.o
obj-$(CONFIG_SERIAL_MUX) += mux.o
diff --git a/drivers/serial/amba-pl011.c b/drivers/serial/amba-pl011.c
index bf82e28770a..72ba0c6d355 100644
--- a/drivers/serial/amba-pl011.c
+++ b/drivers/serial/amba-pl011.c
@@ -826,6 +826,28 @@ static int pl011_remove(struct amba_device *dev)
return 0;
}
+#ifdef CONFIG_PM
+static int pl011_suspend(struct amba_device *dev, pm_message_t state)
+{
+ struct uart_amba_port *uap = amba_get_drvdata(dev);
+
+ if (!uap)
+ return -EINVAL;
+
+ return uart_suspend_port(&amba_reg, &uap->port);
+}
+
+static int pl011_resume(struct amba_device *dev)
+{
+ struct uart_amba_port *uap = amba_get_drvdata(dev);
+
+ if (!uap)
+ return -EINVAL;
+
+ return uart_resume_port(&amba_reg, &uap->port);
+}
+#endif
+
static struct amba_id pl011_ids[] __initdata = {
{
.id = 0x00041011,
@@ -847,6 +869,10 @@ static struct amba_driver pl011_driver = {
.id_table = pl011_ids,
.probe = pl011_probe,
.remove = pl011_remove,
+#ifdef CONFIG_PM
+ .suspend = pl011_suspend,
+ .resume = pl011_resume,
+#endif
};
static int __init pl011_init(void)
diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c
index 5d7b58f1fe4..7485afd0df4 100644
--- a/drivers/serial/imx.c
+++ b/drivers/serial/imx.c
@@ -67,21 +67,8 @@
#define UBIR 0xa4 /* BRM Incremental Register */
#define UBMR 0xa8 /* BRM Modulator Register */
#define UBRC 0xac /* Baud Rate Count Register */
-#if defined CONFIG_ARCH_MX3 || defined CONFIG_ARCH_MX2
-#define ONEMS 0xb0 /* One Millisecond register */
-#define UTS 0xb4 /* UART Test Register */
-#endif
-#ifdef CONFIG_ARCH_MX1
-#define BIPR1 0xb0 /* Incremental Preset Register 1 */
-#define BIPR2 0xb4 /* Incremental Preset Register 2 */
-#define BIPR3 0xb8 /* Incremental Preset Register 3 */
-#define BIPR4 0xbc /* Incremental Preset Register 4 */
-#define BMPR1 0xc0 /* BRM Modulator Register 1 */
-#define BMPR2 0xc4 /* BRM Modulator Register 2 */
-#define BMPR3 0xc8 /* BRM Modulator Register 3 */
-#define BMPR4 0xcc /* BRM Modulator Register 4 */
-#define UTS 0xd0 /* UART Test Register */
-#endif
+#define MX2_ONEMS 0xb0 /* One Millisecond register */
+#define UTS (cpu_is_mx1() ? 0xd0 : 0xb4) /* UART Test Register */
/* UART Control Register Bit Fields.*/
#define URXD_CHARRDY (1<<15)
@@ -101,12 +88,7 @@
#define UCR1_RTSDEN (1<<5) /* RTS delta interrupt enable */
#define UCR1_SNDBRK (1<<4) /* Send break */
#define UCR1_TDMAEN (1<<3) /* Transmitter ready DMA enable */
-#ifdef CONFIG_ARCH_MX1
-#define UCR1_UARTCLKEN (1<<2) /* UART clock enabled */
-#endif
-#if defined CONFIG_ARCH_MX3 || defined CONFIG_ARCH_MX2
-#define UCR1_UARTCLKEN (0) /* not present on mx2/mx3 */
-#endif
+#define MX1_UCR1_UARTCLKEN (1<<2) /* UART clock enabled, mx1 only */
#define UCR1_DOZE (1<<1) /* Doze */
#define UCR1_UARTEN (1<<0) /* UART enabled */
#define UCR2_ESCI (1<<15) /* Escape seq interrupt enable */
@@ -132,13 +114,9 @@
#define UCR3_RXDSEN (1<<6) /* Receive status interrupt enable */
#define UCR3_AIRINTEN (1<<5) /* Async IR wake interrupt enable */
#define UCR3_AWAKEN (1<<4) /* Async wake interrupt enable */
-#ifdef CONFIG_ARCH_MX1
-#define UCR3_REF25 (1<<3) /* Ref freq 25 MHz, only on mx1 */
-#define UCR3_REF30 (1<<2) /* Ref Freq 30 MHz, only on mx1 */
-#endif
-#if defined CONFIG_ARCH_MX2 || defined CONFIG_ARCH_MX3
-#define UCR3_RXDMUXSEL (1<<2) /* RXD Muxed Input Select, on mx2/mx3 */
-#endif
+#define MX1_UCR3_REF25 (1<<3) /* Ref freq 25 MHz, only on mx1 */
+#define MX1_UCR3_REF30 (1<<2) /* Ref Freq 30 MHz, only on mx1 */
+#define MX2_UCR3_RXDMUXSEL (1<<2) /* RXD Muxed Input Select, on mx2/mx3 */
#define UCR3_INVT (1<<1) /* Inverted Infrared transmission */
#define UCR3_BPEN (1<<0) /* Preset registers enable */
#define UCR4_CTSTL_32 (32<<10) /* CTS trigger level (32 chars) */
@@ -186,12 +164,10 @@
#define UTS_SOFTRST (1<<0) /* Software reset */
/* We've been assigned a range on the "Low-density serial ports" major */
-#ifdef CONFIG_ARCH_MXC
#define SERIAL_IMX_MAJOR 207
#define MINOR_START 16
#define DEV_NAME "ttymxc"
#define MAX_INTERNAL_IRQ MXC_INTERNAL_IRQS
-#endif
/*
* This determines how often we check the modem status signals
@@ -706,11 +682,11 @@ static int imx_startup(struct uart_port *port)
}
}
-#if defined CONFIG_ARCH_MX2 || defined CONFIG_ARCH_MX3
- temp = readl(sport->port.membase + UCR3);
- temp |= UCR3_RXDMUXSEL;
- writel(temp, sport->port.membase + UCR3);
-#endif
+ if (!cpu_is_mx1()) {
+ temp = readl(sport->port.membase + UCR3);
+ temp |= MX2_UCR3_RXDMUXSEL;
+ writel(temp, sport->port.membase + UCR3);
+ }
if (USE_IRDA(sport)) {
temp = readl(sport->port.membase + UCR4);
@@ -942,9 +918,9 @@ imx_set_termios(struct uart_port *port, struct ktermios *termios,
writel(num, sport->port.membase + UBIR);
writel(denom, sport->port.membase + UBMR);
-#ifdef ONEMS
- writel(sport->port.uartclk / div / 1000, sport->port.membase + ONEMS);
-#endif
+ if (!cpu_is_mx1())
+ writel(sport->port.uartclk / div / 1000,
+ sport->port.membase + MX2_ONEMS);
writel(old_ucr1, sport->port.membase + UCR1);
@@ -1074,17 +1050,20 @@ static void
imx_console_write(struct console *co, const char *s, unsigned int count)
{
struct imx_port *sport = imx_ports[co->index];
- unsigned int old_ucr1, old_ucr2;
+ unsigned int old_ucr1, old_ucr2, ucr1;
/*
* First, save UCR1/2 and then disable interrupts
*/
- old_ucr1 = readl(sport->port.membase + UCR1);
+ ucr1 = old_ucr1 = readl(sport->port.membase + UCR1);
old_ucr2 = readl(sport->port.membase + UCR2);
- writel((old_ucr1 | UCR1_UARTCLKEN | UCR1_UARTEN) &
- ~(UCR1_TXMPTYEN | UCR1_RRDYEN | UCR1_RTSDEN),
- sport->port.membase + UCR1);
+ if (cpu_is_mx1())
+ ucr1 |= MX1_UCR1_UARTCLKEN;
+ ucr1 |= UCR1_UARTEN;
+ ucr1 &= ~(UCR1_TXMPTYEN | UCR1_RRDYEN | UCR1_RTSDEN);
+
+ writel(ucr1, sport->port.membase + UCR1);
writel(old_ucr2 | UCR2_TXEN, sport->port.membase + UCR2);
diff --git a/drivers/spi/amba-pl022.c b/drivers/spi/amba-pl022.c
index da76797ce8b..c0f950a7cbe 100644
--- a/drivers/spi/amba-pl022.c
+++ b/drivers/spi/amba-pl022.c
@@ -38,14 +38,12 @@
#include <linux/interrupt.h>
#include <linux/spi/spi.h>
#include <linux/workqueue.h>
-#include <linux/errno.h>
#include <linux/delay.h>
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/amba/bus.h>
#include <linux/amba/pl022.h>
#include <linux/io.h>
-#include <linux/delay.h>
/*
* This macro is used to define some register default values.
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 3b54b394017..1999b183481 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -935,7 +935,7 @@ config FB_S1D13XXX
config FB_ATMEL
tristate "AT91/AT32 LCD Controller support"
- depends on FB && (ARCH_AT91SAM9261 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || ARCH_AT91CAP9 || AVR32)
+ depends on FB && (ARCH_AT91SAM9261 || ARCH_AT91SAM9G10 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || ARCH_AT91SAM9G45 || ARCH_AT91CAP9 || AVR32)
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
@@ -951,7 +951,7 @@ config FB_INTSRAM
config FB_ATMEL_STN
bool "Use a STN display with AT91/AT32 LCD Controller"
- depends on FB_ATMEL && MACH_AT91SAM9261EK
+ depends on FB_ATMEL && (MACH_AT91SAM9261EK || MACH_AT91SAM9G10EK)
default n
help
Say Y if you want to connect a STN LCD display to the AT91/AT32 LCD
diff --git a/drivers/video/atmel_lcdfb.c b/drivers/video/atmel_lcdfb.c
index da05f0801bb..2830ffd7297 100644
--- a/drivers/video/atmel_lcdfb.c
+++ b/drivers/video/atmel_lcdfb.c
@@ -182,7 +182,8 @@ static unsigned long compute_hozval(unsigned long xres, unsigned long lcdcon2)
{
unsigned long value;
- if (!(cpu_is_at91sam9261() || cpu_is_at32ap7000()))
+ if (!(cpu_is_at91sam9261() || cpu_is_at91sam9g10()
+ || cpu_is_at32ap7000()))
return xres;
value = xres;
@@ -824,7 +825,8 @@ static int __init atmel_lcdfb_probe(struct platform_device *pdev)
info->fix = atmel_lcdfb_fix;
/* Enable LCDC Clocks */
- if (cpu_is_at91sam9261() || cpu_is_at32ap7000()) {
+ if (cpu_is_at91sam9261() || cpu_is_at91sam9g10()
+ || cpu_is_at32ap7000()) {
sinfo->bus_clk = clk_get(dev, "hck1");
if (IS_ERR(sinfo->bus_clk)) {
ret = PTR_ERR(sinfo->bus_clk);
diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig
index f9d19be0554..90861cd9316 100644
--- a/drivers/video/backlight/Kconfig
+++ b/drivers/video/backlight/Kconfig
@@ -110,7 +110,7 @@ config BACKLIGHT_CLASS_DEVICE
config BACKLIGHT_ATMEL_LCDC
bool "Atmel LCDC Contrast-as-Backlight control"
depends on BACKLIGHT_CLASS_DEVICE && FB_ATMEL
- default y if MACH_SAM9261EK || MACH_SAM9263EK
+ default y if MACH_SAM9261EK || MACH_SAM9G10EK || MACH_SAM9263EK
help
This provides a backlight control internal to the Atmel LCDC
driver. If the LCD "contrast control" on your board is wired
diff --git a/drivers/video/imxfb.c b/drivers/video/imxfb.c
index 15a0ee6d8e2..30ae3022f63 100644
--- a/drivers/video/imxfb.c
+++ b/drivers/video/imxfb.c
@@ -33,6 +33,7 @@
#include <linux/math64.h>
#include <mach/imxfb.h>
+#include <mach/hardware.h>
/*
* Complain if VAR is out of range.
@@ -129,6 +130,10 @@
#define LCDISR_EOF (1<<1)
#define LCDISR_BOF (1<<0)
+/* Used fb-mode. Can be set on kernel command line, therefore file-static. */
+static const char *fb_mode;
+
+
/*
* These are the bitfields for each
* display depth that we support.
@@ -145,10 +150,6 @@ struct imxfb_info {
void __iomem *regs;
struct clk *clk;
- u_int max_bpp;
- u_int max_xres;
- u_int max_yres;
-
/*
* These are the addresses we mapped
* the framebuffer memory region to.
@@ -172,6 +173,9 @@ struct imxfb_info {
cmap_static:1,
unused:30;
+ struct imx_fb_videomode *mode;
+ int num_modes;
+
void (*lcd_power)(int);
void (*backlight_power)(int);
};
@@ -298,6 +302,18 @@ static int imxfb_setcolreg(u_int regno, u_int red, u_int green, u_int blue,
return ret;
}
+static const struct imx_fb_videomode *imxfb_find_mode(struct imxfb_info *fbi)
+{
+ struct imx_fb_videomode *m;
+ int i;
+
+ for (i = 0, m = &fbi->mode[0]; i < fbi->num_modes; i++, m++) {
+ if (!strcmp(m->mode.name, fb_mode))
+ return m;
+ }
+ return NULL;
+}
+
/*
* imxfb_check_var():
* Round up in the following order: bits_per_pixel, xres,
@@ -308,35 +324,81 @@ static int imxfb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
{
struct imxfb_info *fbi = info->par;
struct imxfb_rgb *rgb;
+ const struct imx_fb_videomode *imxfb_mode;
+ unsigned long lcd_clk;
+ unsigned long long tmp;
+ u32 pcr = 0;
if (var->xres < MIN_XRES)
var->xres = MIN_XRES;
if (var->yres < MIN_YRES)
var->yres = MIN_YRES;
- if (var->xres > fbi->max_xres)
- var->xres = fbi->max_xres;
- if (var->yres > fbi->max_yres)
- var->yres = fbi->max_yres;
- var->xres_virtual = max(var->xres_virtual, var->xres);
- var->yres_virtual = max(var->yres_virtual, var->yres);
+
+ imxfb_mode = imxfb_find_mode(fbi);
+ if (!imxfb_mode)
+ return -EINVAL;
+
+ var->xres = imxfb_mode->mode.xres;
+ var->yres = imxfb_mode->mode.yres;
+ var->bits_per_pixel = imxfb_mode->bpp;
+ var->pixclock = imxfb_mode->mode.pixclock;
+ var->hsync_len = imxfb_mode->mode.hsync_len;
+ var->left_margin = imxfb_mode->mode.left_margin;
+ var->right_margin = imxfb_mode->mode.right_margin;
+ var->vsync_len = imxfb_mode->mode.vsync_len;
+ var->upper_margin = imxfb_mode->mode.upper_margin;
+ var->lower_margin = imxfb_mode->mode.lower_margin;
+ var->sync = imxfb_mode->mode.sync;
+ var->xres_virtual = max(var->xres_virtual, var->xres);
+ var->yres_virtual = max(var->yres_virtual, var->yres);
pr_debug("var->bits_per_pixel=%d\n", var->bits_per_pixel);
+
+ lcd_clk = clk_get_rate(fbi->clk);
+
+ tmp = var->pixclock * (unsigned long long)lcd_clk;
+
+ do_div(tmp, 1000000);
+
+ if (do_div(tmp, 1000000) > 500000)
+ tmp++;
+
+ pcr = (unsigned int)tmp;
+
+ if (--pcr > 0x3F) {
+ pcr = 0x3F;
+ printk(KERN_WARNING "Must limit pixel clock to %luHz\n",
+ lcd_clk / pcr);
+ }
+
switch (var->bits_per_pixel) {
case 32:
+ pcr |= PCR_BPIX_18;
rgb = &def_rgb_18;
break;
case 16:
default:
- if (fbi->pcr & PCR_TFT)
+ if (cpu_is_mx1())
+ pcr |= PCR_BPIX_12;
+ else
+ pcr |= PCR_BPIX_16;
+
+ if (imxfb_mode->pcr & PCR_TFT)
rgb = &def_rgb_16_tft;
else
rgb = &def_rgb_16_stn;
break;
case 8:
+ pcr |= PCR_BPIX_8;
rgb = &def_rgb_8;
break;
}
+ /* add sync polarities */
+ pcr |= imxfb_mode->pcr & ~(0x3f | (7 << 25));
+
+ fbi->pcr = pcr;
+
/*
* Copy the RGB parameters for this display
* from the machine specific parameters.
@@ -393,10 +455,6 @@ static void imxfb_enable_controller(struct imxfb_info *fbi)
writel(fbi->screen_dma, fbi->regs + LCDC_SSA);
- /* physical screen start address */
- writel(VPW_VPW(fbi->max_xres * fbi->max_bpp / 8 / 4),
- fbi->regs + LCDC_VPW);
-
/* panning offset 0 (0 pixel offset) */
writel(0x00000000, fbi->regs + LCDC_POS);
@@ -468,8 +526,6 @@ static struct fb_ops imxfb_ops = {
static int imxfb_activate_var(struct fb_var_screeninfo *var, struct fb_info *info)
{
struct imxfb_info *fbi = info->par;
- unsigned int pcr, lcd_clk;
- unsigned long long tmp;
pr_debug("var: xres=%d hslen=%d lm=%d rm=%d\n",
var->xres, var->hsync_len,
@@ -505,6 +561,10 @@ static int imxfb_activate_var(struct fb_var_screeninfo *var, struct fb_info *inf
info->fix.id, var->lower_margin);
#endif
+ /* physical screen start address */
+ writel(VPW_VPW(var->xres * var->bits_per_pixel / 8 / 4),
+ fbi->regs + LCDC_VPW);
+
writel(HCR_H_WIDTH(var->hsync_len - 1) |
HCR_H_WAIT_1(var->right_margin - 1) |
HCR_H_WAIT_2(var->left_margin - 3),
@@ -518,22 +578,7 @@ static int imxfb_activate_var(struct fb_var_screeninfo *var, struct fb_info *inf
writel(SIZE_XMAX(var->xres) | SIZE_YMAX(var->yres),
fbi->regs + LCDC_SIZE);
- lcd_clk = clk_get_rate(fbi->clk);
- tmp = var->pixclock * (unsigned long long)lcd_clk;
- do_div(tmp, 1000000);
- if (do_div(tmp, 1000000) > 500000)
- tmp++;
- pcr = (unsigned int)tmp;
- if (--pcr > 0x3F) {
- pcr = 0x3F;
- printk(KERN_WARNING "Must limit pixel clock to %uHz\n",
- lcd_clk / pcr);
- }
-
- /* add sync polarities */
- pcr |= fbi->pcr & ~0x3F;
-
- writel(pcr, fbi->regs + LCDC_PCR);
+ writel(fbi->pcr, fbi->regs + LCDC_PCR);
writel(fbi->pwmr, fbi->regs + LCDC_PWMR);
writel(fbi->lscr1, fbi->regs + LCDC_LSCR1);
writel(fbi->dmacr, fbi->regs + LCDC_DMACR);
@@ -575,6 +620,8 @@ static int __init imxfb_init_fbinfo(struct platform_device *pdev)
struct imx_fb_platform_data *pdata = pdev->dev.platform_data;
struct fb_info *info = dev_get_drvdata(&pdev->dev);
struct imxfb_info *fbi = info->par;
+ struct imx_fb_videomode *m;
+ int i;
pr_debug("%s\n",__func__);
@@ -603,35 +650,18 @@ static int __init imxfb_init_fbinfo(struct platform_device *pdev)
info->fbops = &imxfb_ops;
info->flags = FBINFO_FLAG_DEFAULT |
FBINFO_READS_FAST;
-
- fbi->max_xres = pdata->xres;
- info->var.xres = pdata->xres;
- info->var.xres_virtual = pdata->xres;
- fbi->max_yres = pdata->yres;
- info->var.yres = pdata->yres;
- info->var.yres_virtual = pdata->yres;
- fbi->max_bpp = pdata->bpp;
- info->var.bits_per_pixel = pdata->bpp;
- info->var.nonstd = pdata->nonstd;
- info->var.pixclock = pdata->pixclock;
- info->var.hsync_len = pdata->hsync_len;
- info->var.left_margin = pdata->left_margin;
- info->var.right_margin = pdata->right_margin;
- info->var.vsync_len = pdata->vsync_len;
- info->var.upper_margin = pdata->upper_margin;
- info->var.lower_margin = pdata->lower_margin;
- info->var.sync = pdata->sync;
info->var.grayscale = pdata->cmap_greyscale;
fbi->cmap_inverse = pdata->cmap_inverse;
fbi->cmap_static = pdata->cmap_static;
- fbi->pcr = pdata->pcr;
fbi->lscr1 = pdata->lscr1;
fbi->dmacr = pdata->dmacr;
fbi->pwmr = pdata->pwmr;
fbi->lcd_power = pdata->lcd_power;
fbi->backlight_power = pdata->backlight_power;
- info->fix.smem_len = fbi->max_xres * fbi->max_yres *
- fbi->max_bpp / 8;
+
+ for (i = 0, m = &pdata->mode[0]; i < pdata->num_modes; i++, m++)
+ info->fix.smem_len = max_t(size_t, info->fix.smem_len,
+ m->mode.xres * m->mode.yres * m->bpp / 8);
return 0;
}
@@ -642,9 +672,9 @@ static int __init imxfb_probe(struct platform_device *pdev)
struct fb_info *info;
struct imx_fb_platform_data *pdata;
struct resource *res;
- int ret;
+ int ret, i;
- printk("i.MX Framebuffer driver\n");
+ dev_info(&pdev->dev, "i.MX Framebuffer driver\n");
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res)
@@ -662,6 +692,9 @@ static int __init imxfb_probe(struct platform_device *pdev)
fbi = info->par;
+ if (!fb_mode)
+ fb_mode = pdata->mode[0].mode.name;
+
platform_set_drvdata(pdev, info);
ret = imxfb_init_fbinfo(pdev);
@@ -684,7 +717,7 @@ static int __init imxfb_probe(struct platform_device *pdev)
fbi->regs = ioremap(res->start, resource_size(res));
if (fbi->regs == NULL) {
- printk(KERN_ERR"Cannot map frame buffer registers\n");
+ dev_err(&pdev->dev, "Cannot map frame buffer registers\n");
goto failed_ioremap;
}
@@ -719,6 +752,13 @@ static int __init imxfb_probe(struct platform_device *pdev)
goto failed_platform_init;
}
+ fbi->mode = pdata->mode;
+ fbi->num_modes = pdata->num_modes;
+
+ INIT_LIST_HEAD(&info->modelist);
+ for (i = 0; i < pdata->num_modes; i++)
+ fb_add_videomode(&pdata->mode[i].mode, &info->modelist);
+
/*
* This makes sure that our colour bitfield
* descriptors are correctly initialised.
@@ -754,7 +794,7 @@ failed_map:
failed_getclock:
iounmap(fbi->regs);
failed_ioremap:
- release_mem_region(res->start, res->end - res->start);
+ release_mem_region(res->start, resource_size(res));
failed_req:
kfree(info->pseudo_palette);
failed_init:
@@ -785,7 +825,7 @@ static int __devexit imxfb_remove(struct platform_device *pdev)
framebuffer_release(info);
iounmap(fbi->regs);
- release_mem_region(res->start, res->end - res->start + 1);
+ release_mem_region(res->start, resource_size(res));
clk_disable(fbi->clk);
clk_put(fbi->clk);
@@ -811,8 +851,34 @@ static struct platform_driver imxfb_driver = {
},
};
+static int imxfb_setup(void)
+{
+#ifndef MODULE
+ char *opt, *options = NULL;
+
+ if (fb_get_options("imxfb", &options))
+ return -ENODEV;
+
+ if (!options || !*options)
+ return 0;
+
+ while ((opt = strsep(&options, ",")) != NULL) {
+ if (!*opt)
+ continue;
+ else
+ fb_mode = opt;
+ }
+#endif
+ return 0;
+}
+
int __init imxfb_init(void)
{
+ int ret = imxfb_setup();
+
+ if (ret < 0)
+ return ret;
+
return platform_driver_probe(&imxfb_driver, imxfb_probe);
}
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-14 05:18:31 +0000