diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/hwmon/asc7621.c | 63 |
1 files changed, 31 insertions, 32 deletions
diff --git a/drivers/hwmon/asc7621.c b/drivers/hwmon/asc7621.c index 7f948105d8a..0f388adc618 100644 --- a/drivers/hwmon/asc7621.c +++ b/drivers/hwmon/asc7621.c @@ -268,8 +268,11 @@ static ssize_t store_fan16(struct device *dev, if (strict_strtol(buf, 10, &reqval)) return -EINVAL; + /* If a minimum RPM of zero is requested, then we set the register to + 0xffff. This value allows the fan to be stopped completely without + generating an alarm. */ reqval = - (SENSORS_LIMIT((reqval) <= 0 ? 0 : 5400000 / (reqval), 0, 65534)); + (reqval <= 0 ? 0xffff : SENSORS_LIMIT(5400000 / reqval, 0, 0xfffe)); mutex_lock(&data->update_lock); data->reg[param->msb[0]] = (reqval >> 8) & 0xff; @@ -285,8 +288,9 @@ static ssize_t store_fan16(struct device *dev, * Voltages are scaled in the device so that the nominal voltage * is 3/4ths of the 0-255 range (i.e. 192). * If all voltages are 'normal' then all voltage registers will - * read 0xC0. This doesn't help us if we don't have a point of refernce. - * The data sheet however provides us with the full scale value for each + * read 0xC0. + * + * The data sheet provides us with the 3/4 scale value for each voltage * which is stored in in_scaling. The sda->index parameter value provides * the index into in_scaling. * @@ -295,7 +299,7 @@ static ssize_t store_fan16(struct device *dev, */ static int asc7621_in_scaling[] = { - 3320, 3000, 4380, 6640, 16000 + 2500, 2250, 3300, 5000, 12000 }; static ssize_t show_in10(struct device *dev, struct device_attribute *attr, @@ -306,19 +310,12 @@ static ssize_t show_in10(struct device *dev, struct device_attribute *attr, u8 nr = sda->index; mutex_lock(&data->update_lock); - regval = (data->reg[param->msb[0]] * asc7621_in_scaling[nr]) / 256; - - /* The LSB value is a 2-bit scaling of the MSB's LSbit value. - * I.E. If the maximim voltage for this input is 6640 millivolts then - * a MSB register value of 0 = 0mv and 255 = 6640mv. - * A 1 step change therefore represents 25.9mv (6640 / 256). - * The extra 2-bits therefore represent increments of 6.48mv. - */ - regval += ((asc7621_in_scaling[nr] / 256) / 4) * - (data->reg[param->lsb[0]] >> 6); - + regval = (data->reg[param->msb[0]] << 8) | (data->reg[param->lsb[0]]); mutex_unlock(&data->update_lock); + /* The LSB value is a 2-bit scaling of the MSB's LSbit value. */ + regval = (regval >> 6) * asc7621_in_scaling[nr] / (0xc0 << 2); + return sprintf(buf, "%u\n", regval); } @@ -331,7 +328,7 @@ static ssize_t show_in8(struct device *dev, struct device_attribute *attr, return sprintf(buf, "%u\n", ((data->reg[param->msb[0]] * - asc7621_in_scaling[nr]) / 256)); + asc7621_in_scaling[nr]) / 0xc0)); } static ssize_t store_in8(struct device *dev, struct device_attribute *attr, @@ -344,9 +341,11 @@ static ssize_t store_in8(struct device *dev, struct device_attribute *attr, if (strict_strtol(buf, 10, &reqval)) return -EINVAL; - reqval = SENSORS_LIMIT(reqval, 0, asc7621_in_scaling[nr]); + reqval = SENSORS_LIMIT(reqval, 0, 0xffff); + + reqval = reqval * 0xc0 / asc7621_in_scaling[nr]; - reqval = (reqval * 255 + 128) / asc7621_in_scaling[nr]; + reqval = SENSORS_LIMIT(reqval, 0, 0xff); mutex_lock(&data->update_lock); data->reg[param->msb[0]] = reqval; @@ -846,11 +845,11 @@ static struct asc7621_param asc7621_params[] = { PWRITE(in3_max, 3, PRI_LOW, 0x4b, 0, 0, 0, in8), PWRITE(in4_max, 4, PRI_LOW, 0x4d, 0, 0, 0, in8), - PREAD(in0_alarm, 0, PRI_LOW, 0x41, 0, 0x01, 0, bitmask), - PREAD(in1_alarm, 1, PRI_LOW, 0x41, 0, 0x01, 1, bitmask), - PREAD(in2_alarm, 2, PRI_LOW, 0x41, 0, 0x01, 2, bitmask), - PREAD(in3_alarm, 3, PRI_LOW, 0x41, 0, 0x01, 3, bitmask), - PREAD(in4_alarm, 4, PRI_LOW, 0x42, 0, 0x01, 0, bitmask), + PREAD(in0_alarm, 0, PRI_HIGH, 0x41, 0, 0x01, 0, bitmask), + PREAD(in1_alarm, 1, PRI_HIGH, 0x41, 0, 0x01, 1, bitmask), + PREAD(in2_alarm, 2, PRI_HIGH, 0x41, 0, 0x01, 2, bitmask), + PREAD(in3_alarm, 3, PRI_HIGH, 0x41, 0, 0x01, 3, bitmask), + PREAD(in4_alarm, 4, PRI_HIGH, 0x42, 0, 0x01, 0, bitmask), PREAD(fan1_input, 0, PRI_HIGH, 0x29, 0x28, 0, 0, fan16), PREAD(fan2_input, 1, PRI_HIGH, 0x2b, 0x2a, 0, 0, fan16), @@ -862,10 +861,10 @@ static struct asc7621_param asc7621_params[] = { PWRITE(fan3_min, 2, PRI_LOW, 0x59, 0x58, 0, 0, fan16), PWRITE(fan4_min, 3, PRI_LOW, 0x5b, 0x5a, 0, 0, fan16), - PREAD(fan1_alarm, 0, PRI_LOW, 0x42, 0, 0x01, 0, bitmask), - PREAD(fan2_alarm, 1, PRI_LOW, 0x42, 0, 0x01, 1, bitmask), - PREAD(fan3_alarm, 2, PRI_LOW, 0x42, 0, 0x01, 2, bitmask), - PREAD(fan4_alarm, 3, PRI_LOW, 0x42, 0, 0x01, 3, bitmask), + PREAD(fan1_alarm, 0, PRI_HIGH, 0x42, 0, 0x01, 2, bitmask), + PREAD(fan2_alarm, 1, PRI_HIGH, 0x42, 0, 0x01, 3, bitmask), + PREAD(fan3_alarm, 2, PRI_HIGH, 0x42, 0, 0x01, 4, bitmask), + PREAD(fan4_alarm, 3, PRI_HIGH, 0x42, 0, 0x01, 5, bitmask), PREAD(temp1_input, 0, PRI_HIGH, 0x25, 0x10, 0, 0, temp10), PREAD(temp2_input, 1, PRI_HIGH, 0x26, 0x15, 0, 0, temp10), @@ -886,10 +885,10 @@ static struct asc7621_param asc7621_params[] = { PWRITE(temp3_max, 2, PRI_LOW, 0x53, 0, 0, 0, temp8), PWRITE(temp4_max, 3, PRI_LOW, 0x35, 0, 0, 0, temp8), - PREAD(temp1_alarm, 0, PRI_LOW, 0x41, 0, 0x01, 4, bitmask), - PREAD(temp2_alarm, 1, PRI_LOW, 0x41, 0, 0x01, 5, bitmask), - PREAD(temp3_alarm, 2, PRI_LOW, 0x41, 0, 0x01, 6, bitmask), - PREAD(temp4_alarm, 3, PRI_LOW, 0x43, 0, 0x01, 0, bitmask), + PREAD(temp1_alarm, 0, PRI_HIGH, 0x41, 0, 0x01, 4, bitmask), + PREAD(temp2_alarm, 1, PRI_HIGH, 0x41, 0, 0x01, 5, bitmask), + PREAD(temp3_alarm, 2, PRI_HIGH, 0x41, 0, 0x01, 6, bitmask), + PREAD(temp4_alarm, 3, PRI_HIGH, 0x43, 0, 0x01, 0, bitmask), PWRITE(temp1_source, 0, PRI_LOW, 0x02, 0, 0x07, 4, bitmask), PWRITE(temp2_source, 1, PRI_LOW, 0x02, 0, 0x07, 0, bitmask), @@ -898,7 +897,7 @@ static struct asc7621_param asc7621_params[] = { PWRITE(temp1_smoothing_enable, 0, PRI_LOW, 0x62, 0, 0x01, 3, bitmask), PWRITE(temp2_smoothing_enable, 1, PRI_LOW, 0x63, 0, 0x01, 7, bitmask), - PWRITE(temp3_smoothing_enable, 2, PRI_LOW, 0x64, 0, 0x01, 3, bitmask), + PWRITE(temp3_smoothing_enable, 2, PRI_LOW, 0x63, 0, 0x01, 3, bitmask), PWRITE(temp4_smoothing_enable, 3, PRI_LOW, 0x3c, 0, 0x01, 3, bitmask), PWRITE(temp1_smoothing_time, 0, PRI_LOW, 0x62, 0, 0x07, 0, temp_st), |