diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/Kconfig | 2 | ||||
| -rw-r--r-- | drivers/Makefile | 2 | ||||
| -rw-r--r-- | drivers/pinctrl/Kconfig | 43 | ||||
| -rw-r--r-- | drivers/pinctrl/Makefile | 8 | ||||
| -rw-r--r-- | drivers/pinctrl/core.c | 598 | ||||
| -rw-r--r-- | drivers/pinctrl/core.h | 71 | ||||
| -rw-r--r-- | drivers/pinctrl/pinmux-sirf.c | 1215 | ||||
| -rw-r--r-- | drivers/pinctrl/pinmux-u300.c | 1135 | ||||
| -rw-r--r-- | drivers/pinctrl/pinmux.c | 1190 | ||||
| -rw-r--r-- | drivers/pinctrl/pinmux.h | 47 |
10 files changed, 4311 insertions, 0 deletions
diff --git a/drivers/Kconfig b/drivers/Kconfig index 95b9e7eefad..e73aaaee013 100644 --- a/drivers/Kconfig +++ b/drivers/Kconfig @@ -56,6 +56,8 @@ source "drivers/pps/Kconfig" source "drivers/ptp/Kconfig" +source "drivers/pinctrl/Kconfig" + source "drivers/gpio/Kconfig" source "drivers/w1/Kconfig" diff --git a/drivers/Makefile b/drivers/Makefile index 7fa433a7030..e7afb3acbc6 100644 --- a/drivers/Makefile +++ b/drivers/Makefile @@ -5,6 +5,8 @@ # Rewritten to use lists instead of if-statements. # +# GPIO must come after pinctrl as gpios may need to mux pins etc +obj-y += pinctrl/ obj-y += gpio/ obj-$(CONFIG_PCI) += pci/ obj-$(CONFIG_PARISC) += parisc/ diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig new file mode 100644 index 00000000000..ef566443f94 --- /dev/null +++ b/drivers/pinctrl/Kconfig @@ -0,0 +1,43 @@ +# +# PINCTRL infrastructure and drivers +# + +menuconfig PINCTRL + bool "PINCTRL Support" + depends on EXPERIMENTAL + help + This enables the PINCTRL subsystem for controlling pins + on chip packages, for example multiplexing pins on primarily + PGA and BGA packages for systems on chip. + + If unsure, say N. + +if PINCTRL + +config PINMUX + bool "Support pinmux controllers" + help + Say Y here if you want the pincontrol subsystem to handle pin + multiplexing drivers. + +config DEBUG_PINCTRL + bool "Debug PINCTRL calls" + depends on DEBUG_KERNEL + help + Say Y here to add some extra checks and diagnostics to PINCTRL calls. + +config PINMUX_SIRF + bool "CSR SiRFprimaII pinmux driver" + depends on ARCH_PRIMA2 + select PINMUX + help + Say Y here to enable the SiRFprimaII pinmux driver + +config PINMUX_U300 + bool "U300 pinmux driver" + depends on ARCH_U300 + select PINMUX + help + Say Y here to enable the U300 pinmux driver + +endif diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile new file mode 100644 index 00000000000..bdc548a6b7e --- /dev/null +++ b/drivers/pinctrl/Makefile @@ -0,0 +1,8 @@ +# generic pinmux support + +ccflags-$(CONFIG_DEBUG_PINMUX) += -DDEBUG + +obj-$(CONFIG_PINCTRL) += core.o +obj-$(CONFIG_PINMUX) += pinmux.o +obj-$(CONFIG_PINMUX_SIRF) += pinmux-sirf.o +obj-$(CONFIG_PINMUX_U300) += pinmux-u300.o diff --git a/drivers/pinctrl/core.c b/drivers/pinctrl/core.c new file mode 100644 index 00000000000..423522d8731 --- /dev/null +++ b/drivers/pinctrl/core.c @@ -0,0 +1,598 @@ +/* + * Core driver for the pin control subsystem + * + * Copyright (C) 2011 ST-Ericsson SA + * Written on behalf of Linaro for ST-Ericsson + * Based on bits of regulator core, gpio core and clk core + * + * Author: Linus Walleij <linus.walleij@linaro.org> + * + * License terms: GNU General Public License (GPL) version 2 + */ +#define pr_fmt(fmt) "pinctrl core: " fmt + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/device.h> +#include <linux/slab.h> +#include <linux/radix-tree.h> +#include <linux/err.h> +#include <linux/list.h> +#include <linux/mutex.h> +#include <linux/spinlock.h> +#include <linux/sysfs.h> +#include <linux/debugfs.h> +#include <linux/seq_file.h> +#include <linux/pinctrl/pinctrl.h> +#include <linux/pinctrl/machine.h> +#include "core.h" +#include "pinmux.h" + +/* Global list of pin control devices */ +static DEFINE_MUTEX(pinctrldev_list_mutex); +static LIST_HEAD(pinctrldev_list); + +static void pinctrl_dev_release(struct device *dev) +{ + struct pinctrl_dev *pctldev = dev_get_drvdata(dev); + kfree(pctldev); +} + +const char *pinctrl_dev_get_name(struct pinctrl_dev *pctldev) +{ + /* We're not allowed to register devices without name */ + return pctldev->desc->name; +} +EXPORT_SYMBOL_GPL(pinctrl_dev_get_name); + +void *pinctrl_dev_get_drvdata(struct pinctrl_dev *pctldev) +{ + return pctldev->driver_data; +} +EXPORT_SYMBOL_GPL(pinctrl_dev_get_drvdata); + +/** + * get_pinctrl_dev_from_dev() - look up pin controller device + * @dev: a device pointer, this may be NULL but then devname needs to be + * defined instead + * @devname: the name of a device instance, as returned by dev_name(), this + * may be NULL but then dev needs to be defined instead + * + * Looks up a pin control device matching a certain device name or pure device + * pointer, the pure device pointer will take precedence. + */ +struct pinctrl_dev *get_pinctrl_dev_from_dev(struct device *dev, + const char *devname) +{ + struct pinctrl_dev *pctldev = NULL; + bool found = false; + + mutex_lock(&pinctrldev_list_mutex); + list_for_each_entry(pctldev, &pinctrldev_list, node) { + if (dev && &pctldev->dev == dev) { + /* Matched on device pointer */ + found = true; + break; + } + + if (devname && + !strcmp(dev_name(&pctldev->dev), devname)) { + /* Matched on device name */ + found = true; + break; + } + } + mutex_unlock(&pinctrldev_list_mutex); + + return found ? pctldev : NULL; +} + +struct pin_desc *pin_desc_get(struct pinctrl_dev *pctldev, int pin) +{ + struct pin_desc *pindesc; + unsigned long flags; + + spin_lock_irqsave(&pctldev->pin_desc_tree_lock, flags); + pindesc = radix_tree_lookup(&pctldev->pin_desc_tree, pin); + spin_unlock_irqrestore(&pctldev->pin_desc_tree_lock, flags); + + return pindesc; +} + +/** + * pin_is_valid() - check if pin exists on controller + * @pctldev: the pin control device to check the pin on + * @pin: pin to check, use the local pin controller index number + * + * This tells us whether a certain pin exist on a certain pin controller or + * not. Pin lists may be sparse, so some pins may not exist. + */ +bool pin_is_valid(struct pinctrl_dev *pctldev, int pin) +{ + struct pin_desc *pindesc; + + if (pin < 0) + return false; + + pindesc = pin_desc_get(pctldev, pin); + if (pindesc == NULL) + return false; + + return true; +} +EXPORT_SYMBOL_GPL(pin_is_valid); + +/* Deletes a range of pin descriptors */ +static void pinctrl_free_pindescs(struct pinctrl_dev *pctldev, + const struct pinctrl_pin_desc *pins, + unsigned num_pins) +{ + int i; + + spin_lock(&pctldev->pin_desc_tree_lock); + for (i = 0; i < num_pins; i++) { + struct pin_desc *pindesc; + + pindesc = radix_tree_lookup(&pctldev->pin_desc_tree, + pins[i].number); + if (pindesc != NULL) { + radix_tree_delete(&pctldev->pin_desc_tree, + pins[i].number); + } + kfree(pindesc); + } + spin_unlock(&pctldev->pin_desc_tree_lock); +} + +static int pinctrl_register_one_pin(struct pinctrl_dev *pctldev, + unsigned number, const char *name) +{ + struct pin_desc *pindesc; + + pindesc = pin_desc_get(pctldev, number); + if (pindesc != NULL) { + pr_err("pin %d already registered on %s\n", number, + pctldev->desc->name); + return -EINVAL; + } + + pindesc = kzalloc(sizeof(*pindesc), GFP_KERNEL); + if (pindesc == NULL) + return -ENOMEM; + spin_lock_init(&pindesc->lock); + + /* Set owner */ + pindesc->pctldev = pctldev; + + /* Copy basic pin info */ + pindesc->name = name; + + spin_lock(&pctldev->pin_desc_tree_lock); + radix_tree_insert(&pctldev->pin_desc_tree, number, pindesc); + spin_unlock(&pctldev->pin_desc_tree_lock); + pr_debug("registered pin %d (%s) on %s\n", + number, name ? name : "(unnamed)", pctldev->desc->name); + return 0; +} + +static int pinctrl_register_pins(struct pinctrl_dev *pctldev, + struct pinctrl_pin_desc const *pins, + unsigned num_descs) +{ + unsigned i; + int ret = 0; + + for (i = 0; i < num_descs; i++) { + ret = pinctrl_register_one_pin(pctldev, + pins[i].number, pins[i].name); + if (ret) + return ret; + } + + return 0; +} + +/** + * pinctrl_match_gpio_range() - check if a certain GPIO pin is in range + * @pctldev: pin controller device to check + * @gpio: gpio pin to check taken from the global GPIO pin space + * + * Tries to match a GPIO pin number to the ranges handled by a certain pin + * controller, return the range or NULL + */ +static struct pinctrl_gpio_range * +pinctrl_match_gpio_range(struct pinctrl_dev *pctldev, unsigned gpio) +{ + struct pinctrl_gpio_range *range = NULL; + + /* Loop over the ranges */ + mutex_lock(&pctldev->gpio_ranges_lock); + list_for_each_entry(range, &pctldev->gpio_ranges, node) { + /* Check if we're in the valid range */ + if (gpio >= range->base && + gpio < range->base + range->npins) { + mutex_unlock(&pctldev->gpio_ranges_lock); + return range; + } + } + mutex_unlock(&pctldev->gpio_ranges_lock); + + return NULL; +} + +/** + * pinctrl_get_device_gpio_range() - find device for GPIO range + * @gpio: the pin to locate the pin controller for + * @outdev: the pin control device if found + * @outrange: the GPIO range if found + * + * Find the pin controller handling a certain GPIO pin from the pinspace of + * the GPIO subsystem, return the device and the matching GPIO range. Returns + * negative if the GPIO range could not be found in any device. + */ +int pinctrl_get_device_gpio_range(unsigned gpio, + struct pinctrl_dev **outdev, + struct pinctrl_gpio_range **outrange) +{ + struct pinctrl_dev *pctldev = NULL; + + /* Loop over the pin controllers */ + mutex_lock(&pinctrldev_list_mutex); + list_for_each_entry(pctldev, &pinctrldev_list, node) { + struct pinctrl_gpio_range *range; + + range = pinctrl_match_gpio_range(pctldev, gpio); + if (range != NULL) { + *outdev = pctldev; + *outrange = range; + mutex_unlock(&pinctrldev_list_mutex); + return 0; + } + } + mutex_unlock(&pinctrldev_list_mutex); + + return -EINVAL; +} + +/** + * pinctrl_add_gpio_range() - register a GPIO range for a controller + * @pctldev: pin controller device to add the range to + * @range: the GPIO range to add + * + * This adds a range of GPIOs to be handled by a certain pin controller. Call + * this to register handled ranges after registering your pin controller. + */ +void pinctrl_add_gpio_range(struct pinctrl_dev *pctldev, + struct pinctrl_gpio_range *range) +{ + mutex_lock(&pctldev->gpio_ranges_lock); + list_add(&range->node, &pctldev->gpio_ranges); + mutex_unlock(&pctldev->gpio_ranges_lock); +} + +/** + * pinctrl_remove_gpio_range() - remove a range of GPIOs fro a pin controller + * @pctldev: pin controller device to remove the range from + * @range: the GPIO range to remove + */ +void pinctrl_remove_gpio_range(struct pinctrl_dev *pctldev, + struct pinctrl_gpio_range *range) +{ + mutex_lock(&pctldev->gpio_ranges_lock); + list_del(&range->node); + mutex_unlock(&pctldev->gpio_ranges_lock); +} + +#ifdef CONFIG_DEBUG_FS + +static int pinctrl_pins_show(struct seq_file *s, void *what) +{ + struct pinctrl_dev *pctldev = s->private; + const struct pinctrl_ops *ops = pctldev->desc->pctlops; + unsigned pin; + + seq_printf(s, "registered pins: %d\n", pctldev->desc->npins); + seq_printf(s, "max pin number: %d\n", pctldev->desc->maxpin); + + /* The highest pin number need to be included in the loop, thus <= */ + for (pin = 0; pin <= pctldev->desc->maxpin; pin++) { + struct pin_desc *desc; + + desc = pin_desc_get(pctldev, pin); + /* Pin space may be sparse */ + if (desc == NULL) + continue; + + seq_printf(s, "pin %d (%s) ", pin, + desc->name ? desc->name : "unnamed"); + + /* Driver-specific info per pin */ + if (ops->pin_dbg_show) + ops->pin_dbg_show(pctldev, s, pin); + + seq_puts(s, "\n"); + } + + return 0; +} + +static int pinctrl_groups_show(struct seq_file *s, void *what) +{ + struct pinctrl_dev *pctldev = s->private; + const struct pinctrl_ops *ops = pctldev->desc->pctlops; + unsigned selector = 0; + + /* No grouping */ + if (!ops) + return 0; + + seq_puts(s, "registered pin groups:\n"); + while (ops->list_groups(pctldev, selector) >= 0) { + const unsigned *pins; + unsigned num_pins; + const char *gname = ops->get_group_name(pctldev, selector); + int ret; + int i; + + ret = ops->get_group_pins(pctldev, selector, + &pins, &num_pins); + if (ret) + seq_printf(s, "%s [ERROR GETTING PINS]\n", + gname); + else { + seq_printf(s, "group: %s, pins = [ ", gname); + for (i = 0; i < num_pins; i++) + seq_printf(s, "%d ", pins[i]); + seq_puts(s, "]\n"); + } + selector++; + } + + + return 0; +} + +static int pinctrl_gpioranges_show(struct seq_file *s, void *what) +{ + struct pinctrl_dev *pctldev = s->private; + struct pinctrl_gpio_range *range = NULL; + + seq_puts(s, "GPIO ranges handled:\n"); + + /* Loop over the ranges */ + mutex_lock(&pctldev->gpio_ranges_lock); + list_for_each_entry(range, &pctldev->gpio_ranges, node) { + seq_printf(s, "%u: %s [%u - %u]\n", range->id, range->name, + range->base, (range->base + range->npins - 1)); + } + mutex_unlock(&pctldev->gpio_ranges_lock); + + return 0; +} + +static int pinctrl_devices_show(struct seq_file *s, void *what) +{ + struct pinctrl_dev *pctldev; + + seq_puts(s, "name [pinmux]\n"); + mutex_lock(&pinctrldev_list_mutex); + list_for_each_entry(pctldev, &pinctrldev_list, node) { + seq_printf(s, "%s ", pctldev->desc->name); + if (pctldev->desc->pmxops) + seq_puts(s, "yes"); + else + seq_puts(s, "no"); + seq_puts(s, "\n"); + } + mutex_unlock(&pinctrldev_list_mutex); + + return 0; +} + +static int pinctrl_pins_open(struct inode *inode, struct file *file) +{ + return single_open(file, pinctrl_pins_show, inode->i_private); +} + +static int pinctrl_groups_open(struct inode *inode, struct file *file) +{ + return single_open(file, pinctrl_groups_show, inode->i_private); +} + +static int pinctrl_gpioranges_open(struct inode *inode, struct file *file) +{ + return single_open(file, pinctrl_gpioranges_show, inode->i_private); +} + +static int pinctrl_devices_open(struct inode *inode, struct file *file) +{ + return single_open(file, pinctrl_devices_show, NULL); +} + +static const struct file_operations pinctrl_pins_ops = { + .open = pinctrl_pins_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static const struct file_operations pinctrl_groups_ops = { + .open = pinctrl_groups_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static const struct file_operations pinctrl_gpioranges_ops = { + .open = pinctrl_gpioranges_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static const struct file_operations pinctrl_devices_ops = { + .open = pinctrl_devices_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static struct dentry *debugfs_root; + +static void pinctrl_init_device_debugfs(struct pinctrl_dev *pctldev) +{ + static struct dentry *device_root; + + device_root = debugfs_create_dir(dev_name(&pctldev->dev), + debugfs_root); + if (IS_ERR(device_root) || !device_root) { + pr_warn("failed to create debugfs directory for %s\n", + dev_name(&pctldev->dev)); + return; + } + debugfs_create_file("pins", S_IFREG | S_IRUGO, + device_root, pctldev, &pinctrl_pins_ops); + debugfs_create_file("pingroups", S_IFREG | S_IRUGO, + device_root, pctldev, &pinctrl_groups_ops); + debugfs_create_file("gpio-ranges", S_IFREG | S_IRUGO, + device_root, pctldev, &pinctrl_gpioranges_ops); + pinmux_init_device_debugfs(device_root, pctldev); +} + +static void pinctrl_init_debugfs(void) +{ + debugfs_root = debugfs_create_dir("pinctrl", NULL); + if (IS_ERR(debugfs_root) || !debugfs_root) { + pr_warn("failed to create debugfs directory\n"); + debugfs_root = NULL; + return; + } + + debugfs_create_file("pinctrl-devices", S_IFREG | S_IRUGO, + debugfs_root, NULL, &pinctrl_devices_ops); + pinmux_init_debugfs(debugfs_root); +} + +#else /* CONFIG_DEBUG_FS */ + +static void pinctrl_init_device_debugfs(struct pinctrl_dev *pctldev) +{ +} + +static void pinctrl_init_debugfs(void) +{ +} + +#endif + +/** + * pinctrl_register() - register a pin controller device + * @pctldesc: descriptor for this pin controller + * @dev: parent device for this pin controller + * @driver_data: private pin controller data for this pin controller + */ +struct pinctrl_dev *pinctrl_register(struct pinctrl_desc *pctldesc, + struct device *dev, void *driver_data) +{ + static atomic_t pinmux_no = ATOMIC_INIT(0); + struct pinctrl_dev *pctldev; + int ret; + + if (pctldesc == NULL) + return NULL; + if (pctldesc->name == NULL) + return NULL; + + /* If we're implementing pinmuxing, check the ops for sanity */ + if (pctldesc->pmxops) { + ret = pinmux_check_ops(pctldesc->pmxops); + if (ret) { + pr_err("%s pinmux ops lacks necessary functions\n", + pctldesc->name); + return NULL; + } + } + + pctldev = kzalloc(sizeof(struct pinctrl_dev), GFP_KERNEL); + if (pctldev == NULL) + return NULL; + + /* Initialize pin control device struct */ + pctldev->owner = pctldesc->owner; + pctldev->desc = pctldesc; + pctldev->driver_data = driver_data; + INIT_RADIX_TREE(&pctldev->pin_desc_tree, GFP_KERNEL); + spin_lock_init(&pctldev->pin_desc_tree_lock); + INIT_LIST_HEAD(&pctldev->gpio_ranges); + mutex_init(&pctldev->gpio_ranges_lock); + + /* Register device */ + pctldev->dev.parent = dev; + dev_set_name(&pctldev->dev, "pinctrl.%d", + atomic_inc_return(&pinmux_no) - 1); + pctldev->dev.release = pinctrl_dev_release; + ret = device_register(&pctldev->dev); + if (ret != 0) { + pr_err("error in device registration\n"); + goto out_reg_dev_err; + } + dev_set_drvdata(&pctldev->dev, pctldev); + + /* Register all the pins */ + pr_debug("try to register %d pins on %s...\n", + pctldesc->npins, pctldesc->name); + ret = pinctrl_register_pins(pctldev, pctldesc->pins, pctldesc->npins); + if (ret) { + pr_err("error during pin registration\n"); + pinctrl_free_pindescs(pctldev, pctldesc->pins, + pctldesc->npins); + goto out_reg_pins_err; + } + + pinctrl_init_device_debugfs(pctldev); + mutex_lock(&pinctrldev_list_mutex); + list_add(&pctldev->node, &pinctrldev_list); + mutex_unlock(&pinctrldev_list_mutex); + pinmux_hog_maps(pctldev); + return pctldev; + +out_reg_pins_err: + device_del(&pctldev->dev); +out_reg_dev_err: + put_device(&pctldev->dev); + return NULL; +} +EXPORT_SYMBOL_GPL(pinctrl_register); + +/** + * pinctrl_unregister() - unregister pinmux + * @pctldev: pin controller to unregister + * + * Called by pinmux drivers to unregister a pinmux. + */ +void pinctrl_unregister(struct pinctrl_dev *pctldev) +{ + if (pctldev == NULL) + return; + + pinmux_unhog_maps(pctldev); + /* TODO: check that no pinmuxes are still active? */ + mutex_lock(&pinctrldev_list_mutex); + list_del(&pctldev->node); + mutex_unlock(&pinctrldev_list_mutex); + /* Destroy descriptor tree */ + pinctrl_free_pindescs(pctldev, pctldev->desc->pins, + pctldev->desc->npins); + device_unregister(&pctldev->dev); +} +EXPORT_SYMBOL_GPL(pinctrl_unregister); + +static int __init pinctrl_init(void) +{ + pr_info("initialized pinctrl subsystem\n"); + pinctrl_init_debugfs(); + return 0; +} + +/* init early since many drivers really need to initialized pinmux early */ +core_initcall(pinctrl_init); diff --git a/drivers/pinctrl/core.h b/drivers/pinctrl/core.h new file mode 100644 index 00000000000..472fa1341cc --- /dev/null +++ b/drivers/pinctrl/core.h @@ -0,0 +1,71 @@ +/* + * Core private header for the pin control subsystem + * + * Copyright (C) 2011 ST-Ericsson SA + * Written on behalf of Linaro for ST-Ericsson + * + * Author: Linus Walleij <linus.walleij@linaro.org> + * + * License terms: GNU General Public License (GPL) version 2 + */ + +/** + * struct pinctrl_dev - pin control class device + * @node: node to include this pin controller in the global pin controller list + * @desc: the pin controller descriptor supplied when initializing this pin + * controller + * @pin_desc_tree: each pin descriptor for this pin controller is stored in + * this radix tree + * @pin_desc_tree_lock: lock for the descriptor tree + * @gpio_ranges: a list of GPIO ranges that is handled by this pin controller, + * ranges are added to this list at runtime + * @gpio_ranges_lock: lock for the GPIO ranges list + * @dev: the device entry for this pin controller + * @owner: module providing the pin controller, used for refcounting + * @driver_data: driver data for drivers registering to the pin controller + * subsystem + * @pinmux_hogs_lock: lock for the pinmux hog list + * @pinmux_hogs: list of pinmux maps hogged by this device + */ +struct pinctrl_dev { + struct list_head node; + struct pinctrl_desc *desc; + struct radix_tree_root pin_desc_tree; + spinlock_t pin_desc_tree_lock; + struct list_head gpio_ranges; + struct mutex gpio_ranges_lock; + struct device dev; + struct module *owner; + void *driver_data; +#ifdef CONFIG_PINMUX + struct mutex pinmux_hogs_lock; + struct list_head pinmux_hogs; +#endif +}; + +/** + * struct pin_desc - pin descriptor for each physical pin in the arch + * @pctldev: corresponding pin control device + * @name: a name for the pin, e.g. the name of the pin/pad/finger on a + * datasheet or such + * @lock: a lock to protect the descriptor structure + * @mux_requested: whether the pin is already requested by pinmux or not + * @mux_function: a named muxing function for the pin that will be passed to + * subdrivers and shown in debugfs etc + */ +struct pin_desc { + struct pinctrl_dev *pctldev; + const char *name; + spinlock_t lock; + /* These fields only added when supporting pinmux drivers */ +#ifdef CONFIG_PINMUX + const char *mux_function; +#endif +}; + +struct pinctrl_dev *get_pinctrl_dev_from_dev(struct device *dev, + const char *dev_name); +struct pin_desc *pin_desc_get(struct pinctrl_dev *pctldev, int pin); +int pinctrl_get_device_gpio_range(unsigned gpio, + struct pinctrl_dev **outdev, + struct pinctrl_gpio_range **outrange); diff --git a/drivers/pinctrl/pinmux-sirf.c b/drivers/pinctrl/pinmux-sirf.c new file mode 100644 index 00000000000..d76cae62095 --- /dev/null +++ b/drivers/pinctrl/pinmux-sirf.c @@ -0,0 +1,1215 @@ +/* + * pinmux driver for CSR SiRFprimaII + * + * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company. + * + * Licensed under GPLv2 or later. + */ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/io.h> +#include <linux/slab.h> +#include <linux/err.h> +#include <linux/pinctrl/pinctrl.h> +#include <linux/pinctrl/pinmux.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/of_device.h> +#include <linux/of_platform.h> +#include <linux/bitops.h> + +#define DRIVER_NAME "pinmux-sirf" + +#define SIRFSOC_NUM_PADS 622 +#define SIRFSOC_GPIO_PAD_EN(g) ((g)*0x100 + 0x84) +#define SIRFSOC_RSC_PIN_MUX 0x4 + +/* + * pad list for the pinmux subsystem + * refer to CS-131858-DC-6A.xls + */ +static const struct pinctrl_pin_desc sirfsoc_pads[] = { + PINCTRL_PIN(4, "pwm0"), + PINCTRL_PIN(5, "pwm1"), + PINCTRL_PIN(6, "pwm2"), + PINCTRL_PIN(7, "pwm3"), + PINCTRL_PIN(8, "warm_rst_b"), + PINCTRL_PIN(9, "odo_0"), + PINCTRL_PIN(10, "odo_1"), + PINCTRL_PIN(11, "dr_dir"), + PINCTRL_PIN(13, "scl_1"), + PINCTRL_PIN(15, "sda_1"), + PINCTRL_PIN(16, "x_ldd[16]"), + PINCTRL_PIN(17, "x_ldd[17]"), + PINCTRL_PIN(18, "x_ldd[18]"), + PINCTRL_PIN(19, "x_ldd[19]"), + PINCTRL_PIN(20, "x_ldd[20]"), + PINCTRL_PIN(21, "x_ldd[21]"), + PINCTRL_PIN(22, "x_ldd[22]"), + PINCTRL_PIN(23, "x_ldd[23], lcdrom_frdy"), + PINCTRL_PIN(24, "gps_sgn"), + PINCTRL_PIN(25, "gps_mag"), + PINCTRL_PIN(26, "gps_clk"), + PINCTRL_PIN(27, "sd_cd_b_1"), + PINCTRL_PIN(28, "sd_vcc_on_1"), + PINCTRL_PIN(29, "sd_wp_b_1"), + PINCTRL_PIN(30, "sd_clk_3"), + PINCTRL_PIN(31, "sd_cmd_3"), + + PINCTRL_PIN(32, "x_sd_dat_3[0]"), + PINCTRL_PIN(33, "x_sd_dat_3[1]"), + PINCTRL_PIN(34, "x_sd_dat_3[2]"), + PINCTRL_PIN(35, "x_sd_dat_3[3]"), + PINCTRL_PIN(36, "x_sd_clk_4"), + PINCTRL_PIN(37, "x_sd_cmd_4"), + PINCTRL_PIN(38, "x_sd_dat_4[0]"), + PINCTRL_PIN(39, "x_sd_dat_4[1]"), + PINCTRL_PIN(40, "x_sd_dat_4[2]"), + PINCTRL_PIN(41, "x_sd_dat_4[3]"), + PINCTRL_PIN(42, "x_cko_1"), + PINCTRL_PIN(43, "x_ac97_bit_clk"), + PINCTRL_PIN(44, "x_ac97_dout"), + PINCTRL_PIN(45, "x_ac97_din"), + PINCTRL_PIN(46, "x_ac97_sync"), + PINCTRL_PIN(47, "x_txd_1"), + PINCTRL_PIN(48, "x_txd_2"), + PINCTRL_PIN(49, "x_rxd_1"), + PINCTRL_PIN(50, "x_rxd_2"), + PINCTRL_PIN(51, "x_usclk_0"), + PINCTRL_PIN(52, "x_utxd_0"), + PINCTRL_PIN(53, "x_urxd_0"), + PINCTRL_PIN(54, "x_utfs_0"), + PINCTRL_PIN(55, "x_urfs_0"), + PINCTRL_PIN(56, "x_usclk_1"), + PINCTRL_PIN(57, "x_utxd_1"), + PINCTRL_PIN(58, "x_urxd_1"), + PINCTRL_PIN(59, "x_utfs_1"), + PINCTRL_PIN(60, "x_urfs_1"), + PINCTRL_PIN(61, "x_usclk_2"), + PINCTRL_PIN(62, "x_utxd_2"), + PINCTRL_PIN(63, "x_urxd_2"), + + PINCTRL_PIN(64, "x_utfs_2"), + PINCTRL_PIN(65, "x_urfs_2"), + PINCTRL_PIN(66, "x_df_we_b"), + PINCTRL_PIN(67, "x_df_re_b"), + PINCTRL_PIN(68, "x_txd_0"), + PINCTRL_PIN(69, "x_rxd_0"), + PINCTRL_PIN(78, "x_cko_0"), + PINCTRL_PIN(79, "x_vip_pxd[7]"), + PINCTRL_PIN(80, "x_vip_pxd[6]"), + PINCTRL_PIN(81, "x_vip_pxd[5]"), + PINCTRL_PIN(82, "x_vip_pxd[4]"), + PINCTRL_PIN(83, "x_vip_pxd[3]"), + PINCTRL_PIN(84, "x_vip_pxd[2]"), + PINCTRL_PIN(85, "x_vip_pxd[1]"), + PINCTRL_PIN(86, "x_vip_pxd[0]"), + PINCTRL_PIN(87, "x_vip_vsync"), + PINCTRL_PIN(88, "x_vip_hsync"), + PINCTRL_PIN(89, "x_vip_pxclk"), + PINCTRL_PIN(90, "x_sda_0"), + PINCTRL_PIN(91, "x_scl_0"), + PINCTRL_PIN(92, "x_df_ry_by"), + PINCTRL_PIN(93, "x_df_cs_b[1]"), + PINCTRL_PIN(94, "x_df_cs_b[0]"), + PINCTRL_PIN(95, "x_l_pclk"), + + PINCTRL_PIN(96, "x_l_lck"), + PINCTRL_PIN(97, "x_l_fck"), + PINCTRL_PIN(98, "x_l_de"), + PINCTRL_PIN(99, "x_ldd[0]"), + PINCTRL_PIN(100, "x_ldd[1]"), + PINCTRL_PIN(101, "x_ldd[2]"), + PINCTRL_PIN(102, "x_ldd[3]"), + PINCTRL_PIN(103, "x_ldd[4]"), + PINCTRL_PIN(104, "x_ldd[5]"), + PINCTRL_PIN(105, "x_ldd[6]"), + PINCTRL_PIN(106, "x_ldd[7]"), + PINCTRL_PIN(107, "x_ldd[8]"), + PINCTRL_PIN(108, "x_ldd[9]"), + PINCTRL_PIN(109, "x_ldd[10]"), + PINCTRL_PIN(110, "x_ldd[11]"), + PINCTRL_PIN(111, "x_ldd[12]"), + PINCTRL_PIN(112, "x_ldd[13]"), + PINCTRL_PIN(113, "x_ldd[14]"), + PINCTRL_PIN(114, "x_ldd[15]"), +}; + +/** + * @dev: a pointer back to containing device + * @virtbase: the offset to the controller in virtual memory + */ +struct sirfsoc_pmx { + struct device *dev; + struct pinctrl_dev *pmx; + void __iomem *gpio_virtbase; + void __iomem *rsc_virtbase; +}; + +/* SIRFSOC_GPIO_PAD_EN set */ +struct sirfsoc_muxmask { + unsigned long group; + unsigned long mask; +}; + +struct sirfsoc_padmux { + unsigned long muxmask_counts; + const struct sirfsoc_muxmask *muxmask; + /* RSC_PIN_MUX set */ + unsigned long funcmask; + unsigned long funcval; +}; + + /** + * struct sirfsoc_pin_group - describes a SiRFprimaII pin group + * @name: the name of this specific pin group + * @pins: an array of discrete physical pins used in this group, taken + * from the driver-local pin enumeration space + * @num_pins: the number of pins in this group array, i.e. the number of + * elements in .pins so we can iterate over that array + */ +struct sirfsoc_pin_group { + const char *name; + const unsigned int *pins; + const unsigned num_pins; +}; + +static const struct sirfsoc_muxmask lcd_16bits_sirfsoc_muxmask[] = { + { + .group = 3, + .mask = BIT(0) | BIT(1) | BIT(2) | BIT(3) | BIT(4) | BIT(5) | BIT(6) | BIT(7) | BIT(8) | + BIT(9) | BIT(10) | BIT(11) | BIT(12) | BIT(13) | BIT(14) | BIT(15) | BIT(16) | + BIT(17) | BIT(18), + }, { + .group = 2, + .mask = BIT(31), + }, +}; + +static const struct sirfsoc_padmux lcd_16bits_padmux = { + .muxmask_counts = ARRAY_SIZE(lcd_16bits_sirfsoc_muxmask), + .muxmask = lcd_16bits_sirfsoc_muxmask, + .funcmask = BIT(4), + .funcval = 0, +}; + +static const unsigned lcd_16bits_pins[] = { 95, 96, 97, 98, 99, 100, 101, 102, 103, 104, + 105, 106, 107, 108, 109, 110, 111, 112, 113, 114 }; + +static const struct sirfsoc_muxmask lcd_18bits_muxmask[] = { + { + .group = 3, + .mask = BIT(0) | BIT(1) | BIT(2) | BIT(3) | BIT(4) | BIT(5) | BIT(6) | BIT(7) | BIT(8) | + BIT(9) | BIT(10) | BIT(11) | BIT(12) | BIT(13) | BIT(14) | BIT(15) | BIT(16) | + BIT(17) | BIT(18), + }, { + .group = 2, + .mask = BIT(31), + }, { + .group = 0, + .mask = BIT(16) | BIT(17), + }, +}; + +static const struct sirfsoc_padmux lcd_18bits_padmux = { + .muxmask_counts = ARRAY_SIZE(lcd_18bits_muxmask), + .muxmask = lcd_18bits_muxmask, + .funcmask = BIT(4), + .funcval = 0, +}; + +static const unsigned lcd_18bits_pins[] = { 16, 17, 95, 96, 97, 98, 99, 100, 101, 102, 103, 104, + 105, 106, 107, 108, 109, 110, 111, 112, 113, 114}; + +static const struct sirfsoc_muxmask lcd_24bits_muxmask[] = { + { + .group = 3, + .mask = BIT(0) | BIT(1) | BIT(2) | BIT(3) | BIT(4) | BIT(5) | BIT(6) | BIT(7) | BIT(8) | + BIT(9) | BIT(10) | BIT(11) | BIT(12) | BIT(13) | BIT(14) | BIT(15) | BIT(16) | + BIT(17) | BIT(18), + }, { + .group = 2, + .mask = BIT(31), + }, { + .group = 0, + .mask = BIT(16) | BIT(17) | BIT(18) | BIT(19) | BIT(20) | BIT(21) | BIT(22) | BIT(23), + }, +}; + +static const struct sirfsoc_padmux lcd_24bits_padmux = { + .muxmask_counts = ARRAY_SIZE(lcd_24bits_muxmask), + .muxmask = lcd_24bits_muxmask, + .funcmask = BIT(4), + .funcval = 0, +}; + +static const unsigned lcd_24bits_pins[] = { 16, 17, 18, 19, 20, 21, 22, 23, 95, 96, 97, 98, 99, 100, 101, 102, 103, 104, + 105, 106, 107, 108, 109, 110, 111, 112, 113, 114 }; + +static const struct sirfsoc_muxmask lcdrom_muxmask[] = { + { + .group = 3, + .mask = BIT(0) | BIT(1) | BIT(2) | BIT(3) | BIT(4) | BIT(5) | BIT(6) | BIT(7) | BIT(8) | + BIT(9) | BIT(10) | BIT(11) | BIT(12) | BIT(13) | BIT(14) | BIT(15) | BIT(16) | + BIT(17) | BIT(18), + }, { + .group = 2, + .mask = BIT(31), + }, { + .group = 0, + .mask = BIT(23), + }, +}; + +static const struct sirfsoc_padmux lcdrom_padmux = { + .muxmask_counts = ARRAY_SIZE(lcdrom_muxmask), + .muxmask = lcdrom_muxmask, + .funcmask = BIT(4), + .funcval = BIT(4), +}; + +static const unsigned lcdrom_pins[] = { 23, 95, 96, 97, 98, 99, 100, 101, 102, 103, 104, + 105, 106, 107, 108, 109, 110, 111, 112, 113, 114 }; + +static const struct sirfsoc_muxmask uart0_muxmask[] = { + { + .group = 2, + .mask = BIT(4) | BIT(5), + }, { + .group = 1, + .mask = BIT(23) | BIT(28), + }, +}; + +static const struct sirfsoc_padmux uart0_padmux = { + .muxmask_counts = ARRAY_SIZE(uart0_muxmask), + .muxmask = uart0_muxmask, + .funcmask = BIT(9), + .funcval = BIT(9), +}; + +static const unsigned uart0_pins[] = { 55, 60, 68, 69 }; + +static const struct sirfsoc_muxmask uart0_nostreamctrl_muxmask[] = { + { + .group = 2, + .mask = BIT(4) | BIT(5), + }, +}; + +static const struct sirfsoc_padmux uart0_nostreamctrl_padmux = { + .muxmask_counts = ARRAY_SIZE(uart0_nostreamctrl_muxmask), + .muxmask = uart0_nostreamctrl_muxmask, +}; + +static const unsigned uart0_nostreamctrl_pins[] = { 68, 39 }; + +static const struct sirfsoc_muxmask uart1_muxmask[] = { + { + .group = 1, + .mask = BIT(15) | BIT(17), + }, +}; + +static const struct sirfsoc_padmux uart1_padmux = { + .muxmask_counts = ARRAY_SIZE(uart1_muxmask), + .muxmask = uart1_muxmask, +}; + +static const unsigned uart1_pins[] = { 47, 49 }; + +static const struct sirfsoc_muxmask uart2_muxmask[] = { + { + .group = 1, + .mask = BIT(16) | BIT(18) | BIT(24) | BIT(27), + }, +}; + +static const struct sirfsoc_padmux uart2_padmux = { + .muxmask_counts = ARRAY_SIZE(uart2_muxmask), + .muxmask = uart2_muxmask, + .funcmask = BIT(10), + .funcval = BIT(10), +}; + +static const unsigned uart2_pins[] = { 48, 50, 56, 59 }; + +static const struct sirfsoc_muxmask uart2_nostreamctrl_muxmask[] = { + { + .group = 1, + .mask = BIT(16) | BIT(18), + }, +}; + +static const struct sirfsoc_padmux uart2_nostreamctrl_padmux = { + .muxmask_counts = ARRAY_SIZE(uart2_nostreamctrl_muxmask), + .muxmask = uart2_nostreamctrl_muxmask, +}; + +static const unsigned uart2_nostreamctrl_pins[] = { 48, 50 }; + +static const struct sirfsoc_muxmask sdmmc3_muxmask[] = { + { + .group = 0, + .mask = BIT(30) | BIT(31), + }, { + .group = 1, + .mask = BIT(0) | BIT(1) | BIT(2) | BIT(3), + }, +}; + +static const struct sirfsoc_padmux sdmmc3_padmux = { + .muxmask_counts = ARRAY_SIZE(sdmmc3_muxmask), + .muxmask = sdmmc3_muxmask, + .funcmask = BIT(7), + .funcval = 0, +}; + +static const unsigned sdmmc3_pins[] = { 30, 31, 32, 33, 34, 35 }; + +static const struct sirfsoc_muxmask spi0_muxmask[] = { + { + .group = 1, + .mask = BIT(0) | BIT(1) | BIT(2) | BIT(3), + }, +}; + +static const struct sirfsoc_padmux spi0_padmux = { + .muxmask_counts = ARRAY_SIZE(spi0_muxmask), + .muxmask = spi0_muxmask, + .funcmask = BIT(7), + .funcval = BIT(7), +}; + +static const unsigned spi0_pins[] = { 32, 33, 34, 35 }; + +static const struct sirfsoc_muxmask sdmmc4_muxmask[] = { + { + .group = 1, + .mask = BIT(4) | BIT(5) | BIT(6) | BIT(7) | BIT(8) | BIT(9), + }, +}; + +static const struct sirfsoc_padmux sdmmc4_padmux = { + .muxmask_counts = ARRAY_SIZE(sdmmc4_muxmask), + .muxmask = sdmmc4_muxmask, +}; + +static const unsigned sdmmc4_pins[] = { 36, 37, 38, 39, 40, 41 }; + +static const struct sirfsoc_muxmask cko1_muxmask[] = { + { + .group = 1, + .mask = BIT(10), + }, +}; + +static const struct sirfsoc_padmux cko1_padmux = { + .muxmask_counts = ARRAY_SIZE(cko1_muxmask), + .muxmask = cko1_muxmask, + .funcmask = BIT(3), + .funcval = 0, +}; + +static const unsigned cko1_pins[] = { 42 }; + +static const struct sirfsoc_muxmask i2s_muxmask[] = { + { + .group = 1, + .mask = + BIT(10) | BIT(11) | BIT(12) | BIT(13) | BIT(14) | BIT(19) + | BIT(23) | BIT(28), + }, +}; + +static const struct sirfsoc_padmux i2s_padmux = { + .muxmask_counts = ARRAY_SIZE(i2s_muxmask), + .muxmask = i2s_muxmask, + .funcmask = BIT(3) | BIT(9), + .funcval = BIT(3), +}; + +static const unsigned i2s_pins[] = { 42, 43, 44, 45, 46, 51, 55, 60 }; + +static const struct sirfsoc_muxmask ac97_muxmask[] = { + { + .group = 1, + .mask = BIT(11) | BIT(12) | BIT(13) | BIT(14), + }, +}; + +static const struct sirfsoc_padmux ac97_padmux = { + .muxmask_counts = ARRAY_SIZE(ac97_muxmask), + .muxmask = ac97_muxmask, + .funcmask = BIT(8), + .funcval = 0, +}; + +static const unsigned ac97_pins[] = { 33, 34, 35, 36 }; + +static const struct sirfsoc_muxmask spi1_muxmask[] = { + { + .group = 1, + .mask = BIT(11) | BIT(12) | BIT(13) | BIT(14), + }, +}; + +static const struct sirfsoc_padmux spi1_padmux = { + .muxmask_counts = ARRAY_SIZE(spi1_muxmask), + .muxmask = spi1_muxmask, + .funcmask = BIT(8), + .funcval = BIT(8), +}; + +static const unsigned spi1_pins[] = { 33, 34, 35, 36 }; + +static const struct sirfsoc_muxmask sdmmc1_muxmask[] = { + { + .group = 0, + .mask = BIT(27) | BIT(28) | BIT(29), + }, +}; + +static const struct sirfsoc_padmux sdmmc1_padmux = { + .muxmask_counts = ARRAY_SIZE(sdmmc1_muxmask), + .muxmask = sdmmc1_muxmask, +}; + +static const unsigned sdmmc1_pins[] = { 27, 28, 29 }; + +static const struct sirfsoc_muxmask gps_muxmask[] = { + { + .group = 0, + .mask = BIT(24) | BIT(25) | BIT(26), + }, +}; + +static const struct sirfsoc_padmux gps_padmux = { + .muxmask_counts = ARRAY_SIZE(gps_muxmask), + .muxmask = gps_muxmask, + .funcmask = BIT(12) | BIT(13) | BIT(14), + .funcval = BIT(12), +}; + +static const unsigned gps_pins[] = { 24, 25, 26 }; + +static const struct sirfsoc_muxmask sdmmc5_muxmask[] = { + { + .group = 0, + .mask = BIT(24) | BIT(25) | BIT(26), + }, { + .group = 1, + .mask = BIT(29), + }, { + .group = 2, + .mask = BIT(0) | BIT(1), + }, +}; + +static const struct sirfsoc_padmux sdmmc5_padmux = { + .muxmask_counts = ARRAY_SIZE(sdmmc5_muxmask), + .muxmask = sdmmc5_muxmask, + .funcmask = BIT(13) | BIT(14), + .funcval = BIT(13) | BIT(14), +}; + +static const unsigned sdmmc5_pins[] = { 24, 25, 26, 61, 64, 65 }; + +static const struct sirfsoc_muxmask usp0_muxmask[] = { + { + .group = 1, + .mask = BIT(19) | BIT(20) | BIT(21) | BIT(22) | BIT(23), + }, +}; + +static const struct sirfsoc_padmux usp0_padmux = { + .muxmask_counts = ARRAY_SIZE(usp0_muxmask), + .muxmask = usp0_muxmask, + .funcmask = BIT(1) | BIT(2) | BIT(6) | BIT(9), + .funcval = 0, +}; + +static const unsigned usp0_pins[] = { 51, 52, 53, 54, 55 }; + +static const struct sirfsoc_muxmask usp1_muxmask[] = { + { + .group = 1, + .mask = BIT(24) | BIT(25) | BIT(26) | BIT(27) | BIT(28), + }, +}; + +static const struct sirfsoc_padmux usp1_padmux = { + .muxmask_counts = ARRAY_SIZE(usp1_muxmask), + .muxmask = usp1_muxmask, + .funcmask = BIT(1) | BIT(9) | BIT(10) | BIT(11), + .funcval = 0, +}; + +static const unsigned usp1_pins[] = { 56, 57, 58, 59, 60 }; + +static const struct sirfsoc_muxmask usp2_muxmask[] = { + { + .group = 1, + .mask = BIT(29) | BIT(30) | BIT(31), + }, { + .group = 2, + .mask = BIT(0) | BIT(1), + }, +}; + +static const struct sirfsoc_padmux usp2_padmux = { + .muxmask_counts = ARRAY_SIZE(usp2_muxmask), + .muxmask = usp2_muxmask, + .funcmask = BIT(13) | BIT(14), + .funcval = 0, +}; + +static const unsigned usp2_pins[] = { 61, 62, 63, 64, 65 }; + +static const struct sirfsoc_muxmask nand_muxmask[] = { + { + .group = 2, + .mask = BIT(2) | BIT(3) | BIT(28) | BIT(29) | BIT(30), + }, +}; + +static const struct sirfsoc_padmux nand_padmux = { + .muxmask_counts = ARRAY_SIZE(nand_muxmask), + .muxmask = nand_muxmask, + .funcmask = BIT(5), + .funcval = 0, +}; + +static const unsigned nand_pins[] = { 64, 65, 92, 93, 94 }; + +static const struct sirfsoc_padmux sdmmc0_padmux = { + .muxmask_counts = 0, + .funcmask = BIT(5), + .funcval = 0, +}; + +static const unsigned sdmmc0_pins[] = { }; + +static const struct sirfsoc_muxmask sdmmc2_muxmask[] = { + { + .group = 2, + .mask = BIT(2) | BIT(3), + }, +}; + +static const struct sirfsoc_padmux sdmmc2_padmux = { + .muxmask_counts = ARRAY_SIZE(sdmmc2_muxmask), + .muxmask = sdmmc2_muxmask, + .funcmask = BIT(5), + .funcval = BIT(5), +}; + +static const unsigned sdmmc2_pins[] = { 66, 67 }; + +static const struct sirfsoc_muxmask cko0_muxmask[] = { + { + .group = 2, + .mask = BIT(14), + }, +}; + +static const struct sirfsoc_padmux cko0_padmux = { + .muxmask_counts = ARRAY_SIZE(cko0_muxmask), + .muxmask = cko0_muxmask, +}; + +static const unsigned cko0_pins[] = { 78 }; + +static const struct sirfsoc_muxmask vip_muxmask[] = { + { + .group = 2, + .mask = BIT(15) | BIT(16) | BIT(17) | BIT(18) | BIT(19) + | BIT(20) | BIT(21) | BIT(22) | BIT(23) | BIT(24) | + BIT(25), + }, +}; + +static const struct sirfsoc_padmux vip_padmux = { + .muxmask_counts = ARRAY_SIZE(vip_muxmask), + .muxmask = vip_muxmask, + .funcmask = BIT(0), + .funcval = 0, +}; + +static const unsigned vip_pins[] = { 79, 80, 81, 82, 83, 84, 85, 86, 87, 88, 89 }; + +static const struct sirfsoc_muxmask i2c0_muxmask[] = { + { + .group = 2, + .mask = BIT(26) | BIT(27), + }, +}; + +static const struct sirfsoc_padmux i2c0_padmux = { + .muxmask_counts = ARRAY_SIZE(i2c0_muxmask), + .muxmask = i2c0_muxmask, +}; + +static const unsigned i2c0_pins[] = { 90, 91 }; + +static const struct sirfsoc_muxmask i2c1_muxmask[] = { + { + .group = 0, + .mask = BIT(13) | BIT(15), + }, +}; + +static const struct sirfsoc_padmux i2c1_padmux = { + .muxmask_counts = ARRAY_SIZE(i2c1_muxmask), + .muxmask = i2c1_muxmask, +}; + +static const unsigned i2c1_pins[] = { 13, 15 }; + +static const struct sirfsoc_muxmask viprom_muxmask[] = { + { + .group = 2, + .mask = BIT(15) | BIT(16) | BIT(17) | BIT(18) | BIT(19) + | BIT(20) | BIT(21) | BIT(22) | BIT(23) | BIT(24) | + BIT(25), + }, { + .group = 0, + .mask = BIT(12), + }, +}; + +static const struct sirfsoc_padmux viprom_padmux = { + .muxmask_counts = ARRAY_SIZE(viprom_muxmask), + .muxmask = viprom_muxmask, + .funcmask = BIT(0), + .funcval = BIT(0), +}; + +static const unsigned viprom_pins[] = { 12, 79, 80, 81, 82, 83, 84, 85, 86, 87, 88, 89 }; + +static const struct sirfsoc_muxmask pwm0_muxmask[] = { + { + .group = 0, + .mask = BIT(4), + }, +}; + +static const struct sirfsoc_padmux pwm0_padmux = { + .muxmask_counts = ARRAY_SIZE(pwm0_muxmask), + .muxmask = pwm0_muxmask, + .funcmask = BIT(12), + .funcval = 0, +}; + +static const unsigned pwm0_pins[] = { 4 }; + +static const struct sirfsoc_muxmask pwm1_muxmask[] = { + { + .group = 0, + .mask = BIT(5), + }, +}; + +static const struct sirfsoc_padmux pwm1_padmux = { + .muxmask_counts = ARRAY_SIZE(pwm1_muxmask), + .muxmask = pwm1_muxmask, +}; + +static const unsigned pwm1_pins[] = { 5 }; + +static const struct sirfsoc_muxmask pwm2_muxmask[] = { + { + .group = 0, + .mask = BIT(6), + }, +}; + +static const struct sirfsoc_padmux pwm2_padmux = { + .muxmask_counts = ARRAY_SIZE(pwm2_muxmask), + .muxmask = pwm2_muxmask, +}; + +static const unsigned pwm2_pins[] = { 6 }; + +static const struct sirfsoc_muxmask pwm3_muxmask[] = { + { + .group = 0, + .mask = BIT(7), + }, +}; + +static const struct sirfsoc_padmux pwm3_padmux = { + .muxmask_counts = ARRAY_SIZE(pwm3_muxmask), + .muxmask = pwm3_muxmask, +}; + +static const unsigned pwm3_pins[] = { 7 }; + +static const struct sirfsoc_muxmask warm_rst_muxmask[] = { + { + .group = 0, + .mask = BIT(8), + }, +}; + +static const struct sirfsoc_padmux warm_rst_padmux = { + .muxmask_counts = ARRAY_SIZE(warm_rst_muxmask), + .muxmask = warm_rst_muxmask, +}; + +static const unsigned warm_rst_pins[] = { 8 }; + +static const struct sirfsoc_muxmask usb0_utmi_drvbus_muxmask[] = { + { + .group = 1, + .mask = BIT(22), + }, +}; +static const struct sirfsoc_padmux usb0_utmi_drvbus_padmux = { + .muxmask_counts = ARRAY_SIZE(usb0_utmi_drvbus_muxmask), + .muxmask = usb0_utmi_drvbus_muxmask, + .funcmask = BIT(6), + .funcval = BIT(6), /* refer to PAD_UTMI_DRVVBUS0_ENABLE */ +}; + +static const unsigned usb0_utmi_drvbus_pins[] = { 54 }; + +static const struct sirfsoc_muxmask usb1_utmi_drvbus_muxmask[] = { + { + .group = 1, + .mask = BIT(27), + }, +}; + +static const struct sirfsoc_padmux usb1_utmi_drvbus_padmux = { + .muxmask_counts = ARRAY_SIZE(usb1_utmi_drvbus_muxmask), + .muxmask = usb1_utmi_drvbus_muxmask, + .funcmask = BIT(11), + .funcval = BIT(11), /* refer to PAD_UTMI_DRVVBUS1_ENABLE */ +}; + +static const unsigned usb1_utmi_drvbus_pins[] = { 59 }; + +static const struct sirfsoc_muxmask pulse_count_muxmask[] = { + { + .group = 0, + .mask = BIT(9) | BIT(10) | BIT(11), + }, +}; + +static const struct sirfsoc_padmux pulse_count_padmux = { + .muxmask_counts = ARRAY_SIZE(pulse_count_muxmask), + .muxmask = pulse_count_muxmask, +}; + +static const unsigned pulse_count_pins[] = { 9, 10, 11 }; + +#define SIRFSOC_PIN_GROUP(n, p) \ + { \ + .name = n, \ + .pins = p, \ + .num_pins = ARRAY_SIZE(p), \ + } + +static const struct sirfsoc_pin_group sirfsoc_pin_groups[] = { + SIRFSOC_PIN_GROUP("lcd_16bitsgrp", lcd_16bits_pins), + SIRFSOC_PIN_GROUP("lcd_18bitsgrp", lcd_18bits_pins), + SIRFSOC_PIN_GROUP("lcd_24bitsgrp", lcd_24bits_pins), + SIRFSOC_PIN_GROUP("lcdrom_grp", lcdrom_pins), + SIRFSOC_PIN_GROUP("uart0grp", uart0_pins), + SIRFSOC_PIN_GROUP("uart1grp", uart1_pins), + SIRFSOC_PIN_GROUP("uart2grp", uart2_pins), + SIRFSOC_PIN_GROUP("uart2_nostreamctrlgrp", uart2_nostreamctrl_pins), + SIRFSOC_PIN_GROUP("usp0grp", usp0_pins), + SIRFSOC_PIN_GROUP("usp1grp", usp1_pins), + SIRFSOC_PIN_GROUP("usp2grp", usp2_pins), + SIRFSOC_PIN_GROUP("i2c0grp", i2c0_pins), + SIRFSOC_PIN_GROUP("i2c1grp", i2c1_pins), + SIRFSOC_PIN_GROUP("pwm0grp", pwm0_pins), + SIRFSOC_PIN_GROUP("pwm1grp", pwm1_pins), + SIRFSOC_PIN_GROUP("pwm2grp", pwm2_pins), + SIRFSOC_PIN_GROUP("pwm3grp", pwm3_pins), + SIRFSOC_PIN_GROUP("vipgrp", vip_pins), + SIRFSOC_PIN_GROUP("vipromgrp", viprom_pins), + SIRFSOC_PIN_GROUP("warm_rstgrp", warm_rst_pins), + SIRFSOC_PIN_GROUP("cko0_rstgrp", cko0_pins), + SIRFSOC_PIN_GROUP("cko1_rstgrp", cko1_pins), + SIRFSOC_PIN_GROUP("sdmmc0grp", sdmmc0_pins), + SIRFSOC_PIN_GROUP("sdmmc1grp", sdmmc1_pins), + SIRFSOC_PIN_GROUP("sdmmc2grp", sdmmc2_pins), + SIRFSOC_PIN_GROUP("sdmmc3grp", sdmmc3_pins), + SIRFSOC_PIN_GROUP("sdmmc4grp", sdmmc4_pins), + SIRFSOC_PIN_GROUP("sdmmc5grp", sdmmc5_pins), + SIRFSOC_PIN_GROUP("usb0_utmi_drvbusgrp", usb0_utmi_drvbus_pins), + SIRFSOC_PIN_GROUP("usb1_utmi_drvbusgrp", usb1_utmi_drvbus_pins), + SIRFSOC_PIN_GROUP("pulse_countgrp", pulse_count_pins), + SIRFSOC_PIN_GROUP("i2sgrp", i2s_pins), + SIRFSOC_PIN_GROUP("ac97grp", ac97_pins), + SIRFSOC_PIN_GROUP("nandgrp", nand_pins), + SIRFSOC_PIN_GROUP("spi0grp", spi0_pins), + SIRFSOC_PIN_GROUP("spi1grp", spi1_pins), + SIRFSOC_PIN_GROUP("gpsgrp", gps_pins), +}; + +static int sirfsoc_list_groups(struct pinctrl_dev *pctldev, unsigned selector) +{ + if (selector >= ARRAY_SIZE(sirfsoc_pin_groups)) + return -EINVAL; + return 0; +} + +static const char *sirfsoc_get_group_name(struct pinctrl_dev *pctldev, + unsigned selector) +{ + if (selector >= ARRAY_SIZE(sirfsoc_pin_groups)) + return NULL; + return sirfsoc_pin_groups[selector].name; +} + +static int sirfsoc_get_group_pins(struct pinctrl_dev *pctldev, unsigned selector, + const unsigned **pins, + unsigned *num_pins) +{ + if (selector >= ARRAY_SIZE(sirfsoc_pin_groups)) + return -EINVAL; + *pins = sirfsoc_pin_groups[selector].pins; + *num_pins = sirfsoc_pin_groups[selector].num_pins; + return 0; +} + +static void sirfsoc_pin_dbg_show(struct pinctrl_dev *pctldev, struct seq_file *s, + unsigned offset) +{ + seq_printf(s, " " DRIVER_NAME); +} + +static struct pinctrl_ops sirfsoc_pctrl_ops = { + .list_groups = sirfsoc_list_groups, + .get_group_name = sirfsoc_get_group_name, + .get_group_pins = sirfsoc_get_group_pins, + .pin_dbg_show = sirfsoc_pin_dbg_show, +}; + +struct sirfsoc_pmx_func { + const char *name; + const char * const *groups; + const unsigned num_groups; + const struct sirfsoc_padmux *padmux; +}; + +static const char * const lcd_16bitsgrp[] = { "lcd_16bitsgrp" }; +static const char * const lcd_18bitsgrp[] = { "lcd_18bitsgrp" }; +static const char * const lcd_24bitsgrp[] = { "lcd_24bitsgrp" }; +static const char * const lcdromgrp[] = { "lcdromgrp" }; +static const char * const uart0grp[] = { "uart0grp" }; +static const char * const uart1grp[] = { "uart1grp" }; +static const char * const uart2grp[] = { "uart2grp" }; +static const char * const uart2_nostreamctrlgrp[] = { "uart2_nostreamctrlgrp" }; +static const char * const usp0grp[] = { "usp0grp" }; +static const char * const usp1grp[] = { "usp1grp" }; +static const char * const usp2grp[] = { "usp2grp" }; +static const char * const i2c0grp[] = { "i2c0grp" }; +static const char * const i2c1grp[] = { "i2c1grp" }; +static const char * const pwm0grp[] = { "pwm0grp" }; +static const char * const pwm1grp[] = { "pwm1grp" }; +static const char * const pwm2grp[] = { "pwm2grp" }; +static const char * const pwm3grp[] = { "pwm3grp" }; +static const char * const vipgrp[] = { "vipgrp" }; +static const char * const vipromgrp[] = { "vipromgrp" }; +static const char * const warm_rstgrp[] = { "warm_rstgrp" }; +static const char * const cko0grp[] = { "cko0grp" }; +static const char * const cko1grp[] = { "cko1grp" }; +static const char * const sdmmc0grp[] = { "sdmmc0grp" }; +static const char * const sdmmc1grp[] = { "sdmmc1grp" }; +static const char * const sdmmc2grp[] = { "sdmmc2grp" }; +static const char * const sdmmc3grp[] = { "sdmmc3grp" }; +static const char * const sdmmc4grp[] = { "sdmmc4grp" }; +static const char * const sdmmc5grp[] = { "sdmmc5grp" }; +static const char * const usb0_utmi_drvbusgrp[] = { "usb0_utmi_drvbusgrp" }; +static const char * const usb1_utmi_drvbusgrp[] = { "usb1_utmi_drvbusgrp" }; +static const char * const pulse_countgrp[] = { "pulse_countgrp" }; +static const char * const i2sgrp[] = { "i2sgrp" }; +static const char * const ac97grp[] = { "ac97grp" }; +static const char * const nandgrp[] = { "nandgrp" }; +static const char * const spi0grp[] = { "spi0grp" }; +static const char * const spi1grp[] = { "spi1grp" }; +static const char * const gpsgrp[] = { "gpsgrp" }; + +#define SIRFSOC_PMX_FUNCTION(n, g, m) \ + { \ + .name = n, \ + .groups = g, \ + .num_groups = ARRAY_SIZE(g), \ + .padmux = &m, \ + } + +static const struct sirfsoc_pmx_func sirfsoc_pmx_functions[] = { + SIRFSOC_PMX_FUNCTION("lcd_16bits", lcd_16bitsgrp, lcd_16bits_padmux), + SIRFSOC_PMX_FUNCTION("lcd_18bits", lcd_18bitsgrp, lcd_18bits_padmux), + SIRFSOC_PMX_FUNCTION("lcd_24bits", lcd_24bitsgrp, lcd_24bits_padmux), + SIRFSOC_PMX_FUNCTION("lcdrom", lcdromgrp, lcdrom_padmux), + SIRFSOC_PMX_FUNCTION("uart0", uart0grp, uart0_padmux), + SIRFSOC_PMX_FUNCTION("uart1", uart1grp, uart1_padmux), + SIRFSOC_PMX_FUNCTION("uart2", uart2grp, uart2_padmux), + SIRFSOC_PMX_FUNCTION("uart2_nostreamctrl", uart2_nostreamctrlgrp, uart2_nostreamctrl_padmux), + SIRFSOC_PMX_FUNCTION("usp0", usp0grp, usp0_padmux), + SIRFSOC_PMX_FUNCTION("usp1", usp1grp, usp1_padmux), + SIRFSOC_PMX_FUNCTION("usp2", usp2grp, usp2_padmux), + SIRFSOC_PMX_FUNCTION("i2c0", i2c0grp, i2c0_padmux), + SIRFSOC_PMX_FUNCTION("i2c1", i2c1grp, i2c1_padmux), + SIRFSOC_PMX_FUNCTION("pwm0", pwm0grp, pwm0_padmux), + SIRFSOC_PMX_FUNCTION("pwm1", pwm1grp, pwm1_padmux), + SIRFSOC_PMX_FUNCTION("pwm2", pwm2grp, pwm2_padmux), + SIRFSOC_PMX_FUNCTION("pwm3", pwm3grp, pwm3_padmux), + SIRFSOC_PMX_FUNCTION("vip", vipgrp, vip_padmux), + SIRFSOC_PMX_FUNCTION("viprom", vipromgrp, viprom_padmux), + SIRFSOC_PMX_FUNCTION("warm_rst", warm_rstgrp, warm_rst_padmux), + SIRFSOC_PMX_FUNCTION("cko0", cko0grp, cko0_padmux), + SIRFSOC_PMX_FUNCTION("cko1", cko1grp, cko1_padmux), + SIRFSOC_PMX_FUNCTION("sdmmc0", sdmmc0grp, sdmmc0_padmux), + SIRFSOC_PMX_FUNCTION("sdmmc1", sdmmc1grp, sdmmc1_padmux), + SIRFSOC_PMX_FUNCTION("sdmmc2", sdmmc2grp, sdmmc2_padmux), + SIRFSOC_PMX_FUNCTION("sdmmc3", sdmmc3grp, sdmmc3_padmux), + SIRFSOC_PMX_FUNCTION("sdmmc4", sdmmc4grp, sdmmc4_padmux), + SIRFSOC_PMX_FUNCTION("sdmmc5", sdmmc5grp, sdmmc5_padmux), + SIRFSOC_PMX_FUNCTION("usb0_utmi_drvbus", usb0_utmi_drvbusgrp, usb0_utmi_drvbus_padmux), + SIRFSOC_PMX_FUNCTION("usb1_utmi_drvbus", usb1_utmi_drvbusgrp, usb1_utmi_drvbus_padmux), + SIRFSOC_PMX_FUNCTION("pulse_count", pulse_countgrp, pulse_count_padmux), + SIRFSOC_PMX_FUNCTION("i2s", i2sgrp, i2s_padmux), + SIRFSOC_PMX_FUNCTION("ac97", ac97grp, ac97_padmux), + SIRFSOC_PMX_FUNCTION("nand", nandgrp, nand_padmux), + SIRFSOC_PMX_FUNCTION("spi0", spi0grp, spi0_padmux), + SIRFSOC_PMX_FUNCTION("spi1", spi1grp, spi1_padmux), + SIRFSOC_PMX_FUNCTION("gps", gpsgrp, gps_padmux), +}; + +static void sirfsoc_pinmux_endisable(struct sirfsoc_pmx *spmx, unsigned selector, + bool enable) +{ + int i; + const struct sirfsoc_padmux *mux = sirfsoc_pmx_functions[selector].padmux; + const struct sirfsoc_muxmask *mask = mux->muxmask; + + for (i = 0; i < mux->muxmask_counts; i++) { + u32 muxval; + muxval = readl(spmx->gpio_virtbase + SIRFSOC_GPIO_PAD_EN(mask[i].group)); + if (enable) + muxval = muxval & ~mask[i].mask; + else + muxval = muxval | mask[i].mask; + writel(muxval, spmx->gpio_virtbase + SIRFSOC_GPIO_PAD_EN(mask[i].group)); + } + + if (mux->funcmask && enable) { + u32 func_en_val; + func_en_val = + readl(spmx->rsc_virtbase + SIRFSOC_RSC_PIN_MUX); + func_en_val = + (func_en_val & ~mux->funcmask) | (mux-> + funcval); + writel(func_en_val, spmx->rsc_virtbase + SIRFSOC_RSC_PIN_MUX); + } +} + +static int sirfsoc_pinmux_enable(struct pinctrl_dev *pmxdev, unsigned selector, + unsigned group) +{ + struct sirfsoc_pmx *spmx; + + spmx = pinctrl_dev_get_drvdata(pmxdev); + sirfsoc_pinmux_endisable(spmx, selector, true); + + return 0; +} + +static void sirfsoc_pinmux_disable(struct pinctrl_dev *pmxdev, unsigned selector, + unsigned group) +{ + struct sirfsoc_pmx *spmx; + + spmx = pinctrl_dev_get_drvdata(pmxdev); + sirfsoc_pinmux_endisable(spmx, selector, false); +} + +static int sirfsoc_pinmux_list_funcs(struct pinctrl_dev *pmxdev, unsigned selector) +{ + if (selector >= ARRAY_SIZE(sirfsoc_pmx_functions)) + return -EINVAL; + return 0; +} + +static const char *sirfsoc_pinmux_get_func_name(struct pinctrl_dev *pctldev, + unsigned selector) +{ + return sirfsoc_pmx_functions[selector].name; +} + +static int sirfsoc_pinmux_get_groups(struct pinctrl_dev *pctldev, unsigned selector, + const char * const **groups, + unsigned * const num_groups) +{ + *groups = sirfsoc_pmx_functions[selector].groups; + *num_groups = sirfsoc_pmx_functions[selector].num_groups; + return 0; +} + +static int sirfsoc_pinmux_request_gpio(struct pinctrl_dev *pmxdev, + struct pinctrl_gpio_range *range, unsigned offset) +{ + struct sirfsoc_pmx *spmx; + + int group = range->id; + + u32 muxval; + + spmx = pinctrl_dev_get_drvdata(pmxdev); + + muxval = readl(spmx->gpio_virtbase + SIRFSOC_GPIO_PAD_EN(group)); + muxval = muxval | (1 << offset); + writel(muxval, spmx->gpio_virtbase + SIRFSOC_GPIO_PAD_EN(group)); + + return 0; +} + +static struct pinmux_ops sirfsoc_pinmux_ops = { + .list_functions = sirfsoc_pinmux_list_funcs, + .enable = sirfsoc_pinmux_enable, + .disable = sirfsoc_pinmux_disable, + .get_function_name = sirfsoc_pinmux_get_func_name, + .get_function_groups = sirfsoc_pinmux_get_groups, + .gpio_request_enable = sirfsoc_pinmux_request_gpio, +}; + +static struct pinctrl_desc sirfsoc_pinmux_desc = { + .name = DRIVER_NAME, + .pins = sirfsoc_pads, + .npins = ARRAY_SIZE(sirfsoc_pads), + .maxpin = SIRFSOC_NUM_PADS - 1, + .pctlops = &sirfsoc_pctrl_ops, + .pmxops = &sirfsoc_pinmux_ops, + .owner = THIS_MODULE, +}; + +/* + * Todo: bind irq_chip to every pinctrl_gpio_range + */ +static struct pinctrl_gpio_range sirfsoc_gpio_ranges[] = { + { + .name = "sirfsoc-gpio*", + .id = 0, + .base = 0, + .npins = 32, + }, { + .name = "sirfsoc-gpio*", + .id = 1, + .base = 32, + .npins = 32, + }, { + .name = "sirfsoc-gpio*", + .id = 2, + .base = 64, + .npins = 32, + }, { + .name = "sirfsoc-gpio*", + .id = 3, + .base = 96, + .npins = 19, + }, +}; + +static void __iomem *sirfsoc_rsc_of_iomap(void) +{ + const struct of_device_id rsc_ids[] = { + { .compatible = "sirf,prima2-rsc" }, + {} + }; + struct device_node *np; + + np = of_find_matching_node(NULL, rsc_ids); + if (!np) + panic("unable to find compatible rsc node in dtb\n"); + + return of_iomap(np, 0); +} + +static int __devinit sirfsoc_pinmux_probe(struct platform_device *pdev) +{ + int ret; + struct sirfsoc_pmx *spmx; + struct device_node *np = pdev->dev.of_node; + int i; + + /* Create state holders etc for this driver */ + spmx = devm_kzalloc(&pdev->dev, sizeof(*spmx), GFP_KERNEL); + if (!spmx) + return -ENOMEM; + + spmx->dev = &pdev->dev; + + platform_set_drvdata(pdev, spmx); + + spmx->gpio_virtbase = of_iomap(np, 0); + if (!spmx->gpio_virtbase) { + ret = -ENOMEM; + dev_err(&pdev->dev, "can't map gpio registers\n"); + goto out_no_gpio_remap; + } + + spmx->rsc_virtbase = sirfsoc_rsc_of_iomap(); + if (!spmx->rsc_virtbase) { + ret = -ENOMEM; + dev_err(&pdev->dev, "can't map rsc registers\n"); + goto out_no_rsc_remap; + } + + /* Now register the pin controller and all pins it handles */ + spmx->pmx = pinctrl_register(&sirfsoc_pinmux_desc, &pdev->dev, spmx); + if (!spmx->pmx) { + dev_err(&pdev->dev, "could not register SIRFSOC pinmux driver\n"); + ret = -EINVAL; + goto out_no_pmx; + } + + for (i = 0; i < ARRAY_SIZE(sirfsoc_gpio_ranges); i++) + pinctrl_add_gpio_range(spmx->pmx, &sirfsoc_gpio_ranges[i]); + + dev_info(&pdev->dev, "initialized SIRFSOC pinmux driver\n"); + + return 0; + +out_no_pmx: + iounmap(spmx->rsc_virtbase); +out_no_rsc_remap: + iounmap(spmx->gpio_virtbase); +out_no_gpio_remap: + platform_set_drvdata(pdev, NULL); + devm_kfree(&pdev->dev, spmx); + return ret; +} + +static const struct of_device_id pinmux_ids[] = { + { .compatible = "sirf,prima2-gpio-pinmux" }, + {} +}; + +static struct platform_driver sirfsoc_pinmux_driver = { + .driver = { + .name = DRIVER_NAME, + .owner = THIS_MODULE, + .of_match_table = pinmux_ids, + }, + .probe = sirfsoc_pinmux_probe, +}; + +static int __init sirfsoc_pinmux_init(void) +{ + return platform_driver_register(&sirfsoc_pinmux_driver); +} +arch_initcall(sirfsoc_pinmux_init); + +MODULE_AUTHOR("Rongjun Ying <rongjun.ying@csr.com>, " + "Barry Song <baohua.song@csr.com>"); +MODULE_DESCRIPTION("SIRFSOC pin control driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/pinctrl/pinmux-u300.c b/drivers/pinctrl/pinmux-u300.c new file mode 100644 index 00000000000..4858a64131f --- /dev/null +++ b/drivers/pinctrl/pinmux-u300.c @@ -0,0 +1,1135 @@ +/* + * Driver for the U300 pin controller + * + * Based on the original U300 padmux functions + * Copyright (C) 2009-2011 ST-Ericsson AB + * Author: Martin Persson <martin.persson@stericsson.com> + * Author: Linus Walleij <linus.walleij@linaro.org> + * + * The DB3350 design and control registers are oriented around pads rather than + * pins, so we enumerate the pads we can mux rather than actual pins. The pads + * are connected to different pins in different packaging types, so it would + * be confusing. + */ +#include <linux/init.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/io.h> +#include <linux/slab.h> +#include <linux/err.h> +#include <linux/pinctrl/pinctrl.h> +#include <linux/pinctrl/pinmux.h> + +/* + * Register definitions for the U300 Padmux control registers in the + * system controller + */ + +/* PAD MUX Control register 1 (LOW) 16bit (R/W) */ +#define U300_SYSCON_PMC1LR 0x007C +#define U300_SYSCON_PMC1LR_MASK 0xFFFF +#define U300_SYSCON_PMC1LR_CDI_MASK 0xC000 +#define U300_SYSCON_PMC1LR_CDI_CDI 0x0000 +#define U300_SYSCON_PMC1LR_CDI_EMIF 0x4000 +/* For BS335 */ +#define U300_SYSCON_PMC1LR_CDI_CDI2 0x8000 +#define U300_SYSCON_PMC1LR_CDI_WCDMA_APP_GPIO 0xC000 +/* For BS365 */ +#define U300_SYSCON_PMC1LR_CDI_GPIO 0x8000 +#define U300_SYSCON_PMC1LR_CDI_WCDMA 0xC000 +/* Common defs */ +#define U300_SYSCON_PMC1LR_PDI_MASK 0x3000 +#define U300_SYSCON_PMC1LR_PDI_PDI 0x0000 +#define U300_SYSCON_PMC1LR_PDI_EGG 0x1000 +#define U300_SYSCON_PMC1LR_PDI_WCDMA 0x3000 +#define U300_SYSCON_PMC1LR_MMCSD_MASK 0x0C00 +#define U300_SYSCON_PMC1LR_MMCSD_MMCSD 0x0000 +#define U300_SYSCON_PMC1LR_MMCSD_MSPRO 0x0400 +#define U300_SYSCON_PMC1LR_MMCSD_DSP 0x0800 +#define U300_SYSCON_PMC1LR_MMCSD_WCDMA 0x0C00 +#define U300_SYSCON_PMC1LR_ETM_MASK 0x0300 +#define U300_SYSCON_PMC1LR_ETM_ACC 0x0000 +#define U300_SYSCON_PMC1LR_ETM_APP 0x0100 +#define U300_SYSCON_PMC1LR_EMIF_1_CS2_MASK 0x00C0 +#define U300_SYSCON_PMC1LR_EMIF_1_CS2_STATIC 0x0000 +#define U300_SYSCON_PMC1LR_EMIF_1_CS2_NFIF 0x0040 +#define U300_SYSCON_PMC1LR_EMIF_1_CS2_SDRAM 0x0080 +#define U300_SYSCON_PMC1LR_EMIF_1_CS2_STATIC_2GB 0x00C0 +#define U300_SYSCON_PMC1LR_EMIF_1_CS1_MASK 0x0030 +#define U300_SYSCON_PMC1LR_EMIF_1_CS1_STATIC 0x0000 +#define U300_SYSCON_PMC1LR_EMIF_1_CS1_NFIF 0x0010 +#define U300_SYSCON_PMC1LR_EMIF_1_CS1_SDRAM 0x0020 +#define U300_SYSCON_PMC1LR_EMIF_1_CS1_SEMI 0x0030 +#define U300_SYSCON_PMC1LR_EMIF_1_CS0_MASK 0x000C +#define U300_SYSCON_PMC1LR_EMIF_1_CS0_STATIC 0x0000 +#define U300_SYSCON_PMC1LR_EMIF_1_CS0_NFIF 0x0004 +#define U300_SYSCON_PMC1LR_EMIF_1_CS0_SDRAM 0x0008 +#define U300_SYSCON_PMC1LR_EMIF_1_CS0_SEMI 0x000C +#define U300_SYSCON_PMC1LR_EMIF_1_MASK 0x0003 +#define U300_SYSCON_PMC1LR_EMIF_1_STATIC 0x0000 +#define U300_SYSCON_PMC1LR_EMIF_1_SDRAM0 0x0001 +#define U300_SYSCON_PMC1LR_EMIF_1_SDRAM1 0x0002 +#define U300_SYSCON_PMC1LR_EMIF_1 0x0003 +/* PAD MUX Control register 2 (HIGH) 16bit (R/W) */ +#define U300_SYSCON_PMC1HR 0x007E +#define U300_SYSCON_PMC1HR_MASK 0xFFFF +#define U300_SYSCON_PMC1HR_MISC_2_MASK 0xC000 +#define U300_SYSCON_PMC1HR_MISC_2_APP_GPIO 0x0000 +#define U300_SYSCON_PMC1HR_MISC_2_MSPRO 0x4000 +#define U300_SYSCON_PMC1HR_MISC_2_DSP 0x8000 +#define U300_SYSCON_PMC1HR_MISC_2_AAIF 0xC000 +#define U300_SYSCON_PMC1HR_APP_GPIO_2_MASK 0x3000 +#define U300_SYSCON_PMC1HR_APP_GPIO_2_APP_GPIO 0x0000 +#define U300_SYSCON_PMC1HR_APP_GPIO_2_NFIF 0x1000 +#define U300_SYSCON_PMC1HR_APP_GPIO_2_DSP 0x2000 +#define U300_SYSCON_PMC1HR_APP_GPIO_2_AAIF 0x3000 +#define U300_SYSCON_PMC1HR_APP_GPIO_1_MASK 0x0C00 +#define U300_SYSCON_PMC1HR_APP_GPIO_1_APP_GPIO 0x0000 +#define U300_SYSCON_PMC1HR_APP_GPIO_1_MMC 0x0400 +#define U300_SYSCON_PMC1HR_APP_GPIO_1_DSP 0x0800 +#define U300_SYSCON_PMC1HR_APP_GPIO_1_AAIF 0x0C00 +#define U300_SYSCON_PMC1HR_APP_SPI_CS_2_MASK 0x0300 +#define U300_SYSCON_PMC1HR_APP_SPI_CS_2_APP_GPIO 0x0000 +#define U300_SYSCON_PMC1HR_APP_SPI_CS_2_SPI 0x0100 +#define U300_SYSCON_PMC1HR_APP_SPI_CS_2_AAIF 0x0300 +#define U300_SYSCON_PMC1HR_APP_SPI_CS_1_MASK 0x00C0 +#define U300_SYSCON_PMC1HR_APP_SPI_CS_1_APP_GPIO 0x0000 +#define U300_SYSCON_PMC1HR_APP_SPI_CS_1_SPI 0x0040 +#define U300_SYSCON_PMC1HR_APP_SPI_CS_1_AAIF 0x00C0 +#define U300_SYSCON_PMC1HR_APP_SPI_2_MASK 0x0030 +#define U300_SYSCON_PMC1HR_APP_SPI_2_APP_GPIO 0x0000 +#define U300_SYSCON_PMC1HR_APP_SPI_2_SPI 0x0010 +#define U300_SYSCON_PMC1HR_APP_SPI_2_DSP 0x0020 +#define U300_SYSCON_PMC1HR_APP_SPI_2_AAIF 0x0030 +#define U300_SYSCON_PMC1HR_APP_UART0_2_MASK 0x000C +#define U300_SYSCON_PMC1HR_APP_UART0_2_APP_GPIO 0x0000 +#define U300_SYSCON_PMC1HR_APP_UART0_2_UART0 0x0004 +#define U300_SYSCON_PMC1HR_APP_UART0_2_NFIF_CS 0x0008 +#define U300_SYSCON_PMC1HR_APP_UART0_2_AAIF 0x000C +#define U300_SYSCON_PMC1HR_APP_UART0_1_MASK 0x0003 +#define U300_SYSCON_PMC1HR_APP_UART0_1_APP_GPIO 0x0000 +#define U300_SYSCON_PMC1HR_APP_UART0_1_UART0 0x0001 +#define U300_SYSCON_PMC1HR_APP_UART0_1_AAIF 0x0003 +/* Padmux 2 control */ +#define U300_SYSCON_PMC2R 0x100 +#define U300_SYSCON_PMC2R_APP_MISC_0_MASK 0x00C0 +#define U300_SYSCON_PMC2R_APP_MISC_0_APP_GPIO 0x0000 +#define U300_SYSCON_PMC2R_APP_MISC_0_EMIF_SDRAM 0x0040 +#define U300_SYSCON_PMC2R_APP_MISC_0_MMC 0x0080 +#define U300_SYSCON_PMC2R_APP_MISC_0_CDI2 0x00C0 +#define U300_SYSCON_PMC2R_APP_MISC_1_MASK 0x0300 +#define U300_SYSCON_PMC2R_APP_MISC_1_APP_GPIO 0x0000 +#define U300_SYSCON_PMC2R_APP_MISC_1_EMIF_SDRAM 0x0100 +#define U300_SYSCON_PMC2R_APP_MISC_1_MMC 0x0200 +#define U300_SYSCON_PMC2R_APP_MISC_1_CDI2 0x0300 +#define U300_SYSCON_PMC2R_APP_MISC_2_MASK 0x0C00 +#define U300_SYSCON_PMC2R_APP_MISC_2_APP_GPIO 0x0000 +#define U300_SYSCON_PMC2R_APP_MISC_2_EMIF_SDRAM 0x0400 +#define U300_SYSCON_PMC2R_APP_MISC_2_MMC 0x0800 +#define U300_SYSCON_PMC2R_APP_MISC_2_CDI2 0x0C00 +#define U300_SYSCON_PMC2R_APP_MISC_3_MASK 0x3000 +#define U300_SYSCON_PMC2R_APP_MISC_3_APP_GPIO 0x0000 +#define U300_SYSCON_PMC2R_APP_MISC_3_EMIF_SDRAM 0x1000 +#define U300_SYSCON_PMC2R_APP_MISC_3_MMC 0x2000 +#define U300_SYSCON_PMC2R_APP_MISC_3_CDI2 0x3000 +#define U300_SYSCON_PMC2R_APP_MISC_4_MASK 0xC000 +#define U300_SYSCON_PMC2R_APP_MISC_4_APP_GPIO 0x0000 +#define U300_SYSCON_PMC2R_APP_MISC_4_EMIF_SDRAM 0x4000 +#define U300_SYSCON_PMC2R_APP_MISC_4_MMC 0x8000 +#define U300_SYSCON_PMC2R_APP_MISC_4_ACC_GPIO 0xC000 +/* TODO: More SYSCON registers missing */ +#define U300_SYSCON_PMC3R 0x10C +#define U300_SYSCON_PMC3R_APP_MISC_11_MASK 0xC000 +#define U300_SYSCON_PMC3R_APP_MISC_11_SPI 0x4000 +#define U300_SYSCON_PMC3R_APP_MISC_10_MASK 0x3000 +#define U300_SYSCON_PMC3R_APP_MISC_10_SPI 0x1000 +/* TODO: Missing other configs */ +#define U300_SYSCON_PMC4R 0x168 +#define U300_SYSCON_PMC4R_APP_MISC_12_MASK 0x0003 +#define U300_SYSCON_PMC4R_APP_MISC_12_APP_GPIO 0x0000 +#define U300_SYSCON_PMC4R_APP_MISC_13_MASK 0x000C +#define U300_SYSCON_PMC4R_APP_MISC_13_CDI 0x0000 +#define U300_SYSCON_PMC4R_APP_MISC_13_SMIA 0x0004 +#define U300_SYSCON_PMC4R_APP_MISC_13_SMIA2 0x0008 +#define U300_SYSCON_PMC4R_APP_MISC_13_APP_GPIO 0x000C +#define U300_SYSCON_PMC4R_APP_MISC_14_MASK 0x0030 +#define U300_SYSCON_PMC4R_APP_MISC_14_CDI 0x0000 +#define U300_SYSCON_PMC4R_APP_MISC_14_SMIA 0x0010 +#define U300_SYSCON_PMC4R_APP_MISC_14_CDI2 0x0020 +#define U300_SYSCON_PMC4R_APP_MISC_14_APP_GPIO 0x0030 +#define U300_SYSCON_PMC4R_APP_MISC_16_MASK 0x0300 +#define U300_SYSCON_PMC4R_APP_MISC_16_APP_GPIO_13 0x0000 +#define U300_SYSCON_PMC4R_APP_MISC_16_APP_UART1_CTS 0x0100 +#define U300_SYSCON_PMC4R_APP_MISC_16_EMIF_1_STATIC_CS5_N 0x0200 + +#define DRIVER_NAME "pinmux-u300" + +/* + * The DB3350 has 467 pads, I have enumerated the pads clockwise around the + * edges of the silicon, finger by finger. LTCORNER upper left is pad 0. + * Data taken from the PadRing chart, arranged like this: + * + * 0 ..... 104 + * 466 105 + * . . + * . . + * 358 224 + * 357 .... 225 + */ +#define U300_NUM_PADS 467 + +/* Pad names for the pinmux subsystem */ +static const struct pinctrl_pin_desc u300_pads[] = { + /* Pads along the top edge of the chip */ + PINCTRL_PIN(0, "P PAD VDD 28"), + PINCTRL_PIN(1, "P PAD GND 28"), + PINCTRL_PIN(2, "PO SIM RST N"), + PINCTRL_PIN(3, "VSSIO 25"), + PINCTRL_PIN(4, "VSSA ADDA ESDSUB"), + PINCTRL_PIN(5, "PWR VSSCOMMON"), + PINCTRL_PIN(6, "PI ADC I1 POS"), + PINCTRL_PIN(7, "PI ADC I1 NEG"), + PINCTRL_PIN(8, "PWR VSSAD0"), + PINCTRL_PIN(9, "PWR VCCAD0"), + PINCTRL_PIN(10, "PI ADC Q1 NEG"), + PINCTRL_PIN(11, "PI ADC Q1 POS"), + PINCTRL_PIN(12, "PWR VDDAD"), + PINCTRL_PIN(13, "PWR GNDAD"), + PINCTRL_PIN(14, "PI ADC I2 POS"), + PINCTRL_PIN(15, "PI ADC I2 NEG"), + PINCTRL_PIN(16, "PWR VSSAD1"), + PINCTRL_PIN(17, "PWR VCCAD1"), + PINCTRL_PIN(18, "PI ADC Q2 NEG"), + PINCTRL_PIN(19, "PI ADC Q2 POS"), + PINCTRL_PIN(20, "VSSA ADDA ESDSUB"), + PINCTRL_PIN(21, "PWR VCCGPAD"), + PINCTRL_PIN(22, "PI TX POW"), + PINCTRL_PIN(23, "PWR VSSGPAD"), + PINCTRL_PIN(24, "PO DAC I POS"), + PINCTRL_PIN(25, "PO DAC I NEG"), + PINCTRL_PIN(26, "PO DAC Q POS"), + PINCTRL_PIN(27, "PO DAC Q NEG"), + PINCTRL_PIN(28, "PWR VSSDA"), + PINCTRL_PIN(29, "PWR VCCDA"), + PINCTRL_PIN(30, "VSSA ADDA ESDSUB"), + PINCTRL_PIN(31, "P PAD VDDIO 11"), + PINCTRL_PIN(32, "PI PLL 26 FILTVDD"), + PINCTRL_PIN(33, "PI PLL 26 VCONT"), + PINCTRL_PIN(34, "PWR AGNDPLL2V5 32 13"), + PINCTRL_PIN(35, "PWR AVDDPLL2V5 32 13"), + PINCTRL_PIN(36, "VDDA PLL ESD"), + PINCTRL_PIN(37, "VSSA PLL ESD"), + PINCTRL_PIN(38, "VSS PLL"), + PINCTRL_PIN(39, "VDDC PLL"), + PINCTRL_PIN(40, "PWR AGNDPLL2V5 26 60"), + PINCTRL_PIN(41, "PWR AVDDPLL2V5 26 60"), + PINCTRL_PIN(42, "PWR AVDDPLL2V5 26 208"), + PINCTRL_PIN(43, "PWR AGNDPLL2V5 26 208"), + PINCTRL_PIN(44, "PWR AVDDPLL2V5 13 208"), + PINCTRL_PIN(45, "PWR AGNDPLL2V5 13 208"), + PINCTRL_PIN(46, "P PAD VSSIO 11"), + PINCTRL_PIN(47, "P PAD VSSIO 12"), + PINCTRL_PIN(48, "PI POW RST N"), + PINCTRL_PIN(49, "VDDC IO"), + PINCTRL_PIN(50, "P PAD VDDIO 16"), + PINCTRL_PIN(51, "PO RF WCDMA EN 4"), + PINCTRL_PIN(52, "PO RF WCDMA EN 3"), + PINCTRL_PIN(53, "PO RF WCDMA EN 2"), + PINCTRL_PIN(54, "PO RF WCDMA EN 1"), + PINCTRL_PIN(55, "PO RF WCDMA EN 0"), + PINCTRL_PIN(56, "PO GSM PA ENABLE"), + PINCTRL_PIN(57, "PO RF DATA STRB"), + PINCTRL_PIN(58, "PO RF DATA2"), + PINCTRL_PIN(59, "PIO RF DATA1"), + PINCTRL_PIN(60, "PIO RF DATA0"), + PINCTRL_PIN(61, "P PAD VDD 11"), + PINCTRL_PIN(62, "P PAD GND 11"), + PINCTRL_PIN(63, "P PAD VSSIO 16"), + PINCTRL_PIN(64, "P PAD VDDIO 18"), + PINCTRL_PIN(65, "PO RF CTRL STRB2"), + PINCTRL_PIN(66, "PO RF CTRL STRB1"), + PINCTRL_PIN(67, "PO RF CTRL STRB0"), + PINCTRL_PIN(68, "PIO RF CTRL DATA"), + PINCTRL_PIN(69, "PO RF CTRL CLK"), + PINCTRL_PIN(70, "PO TX ADC STRB"), + PINCTRL_PIN(71, "PO ANT SW 2"), + PINCTRL_PIN(72, "PO ANT SW 3"), + PINCTRL_PIN(73, "PO ANT SW 0"), + PINCTRL_PIN(74, "PO ANT SW 1"), + PINCTRL_PIN(75, "PO M CLKRQ"), + PINCTRL_PIN(76, "PI M CLK"), + PINCTRL_PIN(77, "PI RTC CLK"), + PINCTRL_PIN(78, "P PAD VDD 8"), + PINCTRL_PIN(79, "P PAD GND 8"), + PINCTRL_PIN(80, "P PAD VSSIO 13"), + PINCTRL_PIN(81, "P PAD VDDIO 13"), + PINCTRL_PIN(82, "PO SYS 1 CLK"), + PINCTRL_PIN(83, "PO SYS 2 CLK"), + PINCTRL_PIN(84, "PO SYS 0 CLK"), + PINCTRL_PIN(85, "PI SYS 0 CLKRQ"), + PINCTRL_PIN(86, "PO PWR MNGT CTRL 1"), + PINCTRL_PIN(87, "PO PWR MNGT CTRL 0"), + PINCTRL_PIN(88, "PO RESOUT2 RST N"), + PINCTRL_PIN(89, "PO RESOUT1 RST N"), + PINCTRL_PIN(90, "PO RESOUT0 RST N"), + PINCTRL_PIN(91, "PI SERVICE N"), + PINCTRL_PIN(92, "P PAD VDD 29"), + PINCTRL_PIN(93, "P PAD GND 29"), + PINCTRL_PIN(94, "P PAD VSSIO 8"), + PINCTRL_PIN(95, "P PAD VDDIO 8"), + PINCTRL_PIN(96, "PI EXT IRQ1 N"), + PINCTRL_PIN(97, "PI EXT IRQ0 N"), + PINCTRL_PIN(98, "PIO DC ON"), + PINCTRL_PIN(99, "PIO ACC APP I2C DATA"), + PINCTRL_PIN(100, "PIO ACC APP I2C CLK"), + PINCTRL_PIN(101, "P PAD VDD 12"), + PINCTRL_PIN(102, "P PAD GND 12"), + PINCTRL_PIN(103, "P PAD VSSIO 14"), + PINCTRL_PIN(104, "P PAD VDDIO 14"), + /* Pads along the right edge of the chip */ + PINCTRL_PIN(105, "PIO APP I2C1 DATA"), + PINCTRL_PIN(106, "PIO APP I2C1 CLK"), + PINCTRL_PIN(107, "PO KEY OUT0"), + PINCTRL_PIN(108, "PO KEY OUT1"), + PINCTRL_PIN(109, "PO KEY OUT2"), + PINCTRL_PIN(110, "PO KEY OUT3"), + PINCTRL_PIN(111, "PO KEY OUT4"), + PINCTRL_PIN(112, "PI KEY IN0"), + PINCTRL_PIN(113, "PI KEY IN1"), + PINCTRL_PIN(114, "PI KEY IN2"), + PINCTRL_PIN(115, "P PAD VDDIO 15"), + PINCTRL_PIN(116, "P PAD VSSIO 15"), + PINCTRL_PIN(117, "P PAD GND 13"), + PINCTRL_PIN(118, "P PAD VDD 13"), + PINCTRL_PIN(119, "PI KEY IN3"), + PINCTRL_PIN(120, "PI KEY IN4"), + PINCTRL_PIN(121, "PI KEY IN5"), + PINCTRL_PIN(122, "PIO APP PCM I2S1 DATA B"), + PINCTRL_PIN(123, "PIO APP PCM I2S1 DATA A"), + PINCTRL_PIN(124, "PIO APP PCM I2S1 WS"), + PINCTRL_PIN(125, "PIO APP PCM I2S1 CLK"), + PINCTRL_PIN(126, "PIO APP PCM I2S0 DATA B"), + PINCTRL_PIN(127, "PIO APP PCM I2S0 DATA A"), + PINCTRL_PIN(128, "PIO APP PCM I2S0 WS"), + PINCTRL_PIN(129, "PIO APP PCM I2S0 CLK"), + PINCTRL_PIN(130, "P PAD VDD 17"), + PINCTRL_PIN(131, "P PAD GND 17"), + PINCTRL_PIN(132, "P PAD VSSIO 19"), + PINCTRL_PIN(133, "P PAD VDDIO 19"), + PINCTRL_PIN(134, "UART0 RTS"), + PINCTRL_PIN(135, "UART0 CTS"), + PINCTRL_PIN(136, "UART0 TX"), + PINCTRL_PIN(137, "UART0 RX"), + PINCTRL_PIN(138, "PIO ACC SPI DO"), + PINCTRL_PIN(139, "PIO ACC SPI DI"), + PINCTRL_PIN(140, "PIO ACC SPI CS0 N"), + PINCTRL_PIN(141, "PIO ACC SPI CS1 N"), + PINCTRL_PIN(142, "PIO ACC SPI CS2 N"), + PINCTRL_PIN(143, "PIO ACC SPI CLK"), + PINCTRL_PIN(144, "PO PDI EXT RST N"), + PINCTRL_PIN(145, "P PAD VDDIO 22"), + PINCTRL_PIN(146, "P PAD VSSIO 22"), + PINCTRL_PIN(147, "P PAD GND 18"), + PINCTRL_PIN(148, "P PAD VDD 18"), + PINCTRL_PIN(149, "PIO PDI C0"), + PINCTRL_PIN(150, "PIO PDI C1"), + PINCTRL_PIN(151, "PIO PDI C2"), + PINCTRL_PIN(152, "PIO PDI C3"), + PINCTRL_PIN(153, "PIO PDI C4"), + PINCTRL_PIN(154, "PIO PDI C5"), + PINCTRL_PIN(155, "PIO PDI D0"), + PINCTRL_PIN(156, "PIO PDI D1"), + PINCTRL_PIN(157, "PIO PDI D2"), + PINCTRL_PIN(158, "PIO PDI D3"), + PINCTRL_PIN(159, "P PAD VDDIO 21"), + PINCTRL_PIN(160, "P PAD VSSIO 21"), + PINCTRL_PIN(161, "PIO PDI D4"), + PINCTRL_PIN(162, "PIO PDI D5"), + PINCTRL_PIN(163, "PIO PDI D6"), + PINCTRL_PIN(164, "PIO PDI D7"), + PINCTRL_PIN(165, "PIO MS INS"), + PINCTRL_PIN(166, "MMC DATA DIR LS"), + PINCTRL_PIN(167, "MMC DATA 3"), + PINCTRL_PIN(168, "MMC DATA 2"), + PINCTRL_PIN(169, "MMC DATA 1"), + PINCTRL_PIN(170, "MMC DATA 0"), + PINCTRL_PIN(171, "MMC CMD DIR LS"), + PINCTRL_PIN(172, "P PAD VDD 27"), + PINCTRL_PIN(173, "P PAD GND 27"), + PINCTRL_PIN(174, "P PAD VSSIO 20"), + PINCTRL_PIN(175, "P PAD VDDIO 20"), + PINCTRL_PIN(176, "MMC CMD"), + PINCTRL_PIN(177, "MMC CLK"), + PINCTRL_PIN(178, "PIO APP GPIO 14"), + PINCTRL_PIN(179, "PIO APP GPIO 13"), + PINCTRL_PIN(180, "PIO APP GPIO 11"), + PINCTRL_PIN(181, "PIO APP GPIO 25"), + PINCTRL_PIN(182, "PIO APP GPIO 24"), + PINCTRL_PIN(183, "PIO APP GPIO 23"), + PINCTRL_PIN(184, "PIO APP GPIO 22"), + PINCTRL_PIN(185, "PIO APP GPIO 21"), + PINCTRL_PIN(186, "PIO APP GPIO 20"), + PINCTRL_PIN(187, "P PAD VDD 19"), + PINCTRL_PIN(188, "P PAD GND 19"), + PINCTRL_PIN(189, "P PAD VSSIO 23"), + PINCTRL_PIN(190, "P PAD VDDIO 23"), + PINCTRL_PIN(191, "PIO APP GPIO 19"), + PINCTRL_PIN(192, "PIO APP GPIO 18"), + PINCTRL_PIN(193, "PIO APP GPIO 17"), + PINCTRL_PIN(194, "PIO APP GPIO 16"), + PINCTRL_PIN(195, "PI CI D1"), + PINCTRL_PIN(196, "PI CI D0"), + PINCTRL_PIN(197, "PI CI HSYNC"), + PINCTRL_PIN(198, "PI CI VSYNC"), + PINCTRL_PIN(199, "PI CI EXT CLK"), + PINCTRL_PIN(200, "PO CI EXT RST N"), + PINCTRL_PIN(201, "P PAD VSSIO 43"), + PINCTRL_PIN(202, "P PAD VDDIO 43"), + PINCTRL_PIN(203, "PI CI D6"), + PINCTRL_PIN(204, "PI CI D7"), + PINCTRL_PIN(205, "PI CI D2"), + PINCTRL_PIN(206, "PI CI D3"), + PINCTRL_PIN(207, "PI CI D4"), + PINCTRL_PIN(208, "PI CI D5"), + PINCTRL_PIN(209, "PI CI D8"), + PINCTRL_PIN(210, "PI CI D9"), + PINCTRL_PIN(211, "P PAD VDD 20"), + PINCTRL_PIN(212, "P PAD GND 20"), + PINCTRL_PIN(213, "P PAD VSSIO 24"), + PINCTRL_PIN(214, "P PAD VDDIO 24"), + PINCTRL_PIN(215, "P PAD VDDIO 26"), + PINCTRL_PIN(216, "PO EMIF 1 A26"), + PINCTRL_PIN(217, "PO EMIF 1 A25"), + PINCTRL_PIN(218, "P PAD VSSIO 26"), + PINCTRL_PIN(219, "PO EMIF 1 A24"), + PINCTRL_PIN(220, "PO EMIF 1 A23"), + /* Pads along the bottom edge of the chip */ + PINCTRL_PIN(221, "PO EMIF 1 A22"), + PINCTRL_PIN(222, "PO EMIF 1 A21"), + PINCTRL_PIN(223, "P PAD VDD 21"), + PINCTRL_PIN(224, "P PAD GND 21"), + PINCTRL_PIN(225, "P PAD VSSIO 27"), + PINCTRL_PIN(226, "P PAD VDDIO 27"), + PINCTRL_PIN(227, "PO EMIF 1 A20"), + PINCTRL_PIN(228, "PO EMIF 1 A19"), + PINCTRL_PIN(229, "PO EMIF 1 A18"), + PINCTRL_PIN(230, "PO EMIF 1 A17"), + PINCTRL_PIN(231, "P PAD VDDIO 28"), + PINCTRL_PIN(232, "P PAD VSSIO 28"), + PINCTRL_PIN(233, "PO EMIF 1 A16"), + PINCTRL_PIN(234, "PIO EMIF 1 D15"), + PINCTRL_PIN(235, "PO EMIF 1 A15"), + PINCTRL_PIN(236, "PIO EMIF 1 D14"), + PINCTRL_PIN(237, "P PAD VDD 22"), + PINCTRL_PIN(238, "P PAD GND 22"), + PINCTRL_PIN(239, "P PAD VSSIO 29"), + PINCTRL_PIN(240, "P PAD VDDIO 29"), + PINCTRL_PIN(241, "PO EMIF 1 A14"), + PINCTRL_PIN(242, "PIO EMIF 1 D13"), + PINCTRL_PIN(243, "PO EMIF 1 A13"), + PINCTRL_PIN(244, "PIO EMIF 1 D12"), + PINCTRL_PIN(245, "P PAD VSSIO 30"), + PINCTRL_PIN(246, "P PAD VDDIO 30"), + PINCTRL_PIN(247, "PO EMIF 1 A12"), + PINCTRL_PIN(248, "PIO EMIF 1 D11"), + PINCTRL_PIN(249, "PO EMIF 1 A11"), + PINCTRL_PIN(250, "PIO EMIF 1 D10"), + PINCTRL_PIN(251, "P PAD VSSIO 31"), + PINCTRL_PIN(252, "P PAD VDDIO 31"), + PINCTRL_PIN(253, "PO EMIF 1 A10"), + PINCTRL_PIN(254, "PIO EMIF 1 D09"), + PINCTRL_PIN(255, "PO EMIF 1 A09"), + PINCTRL_PIN(256, "P PAD VDDIO 32"), + PINCTRL_PIN(257, "P PAD VSSIO 32"), + PINCTRL_PIN(258, "P PAD GND 24"), + PINCTRL_PIN(259, "P PAD VDD 24"), + PINCTRL_PIN(260, "PIO EMIF 1 D08"), + PINCTRL_PIN(261, "PO EMIF 1 A08"), + PINCTRL_PIN(262, "PIO EMIF 1 D07"), + PINCTRL_PIN(263, "PO EMIF 1 A07"), + PINCTRL_PIN(264, "P PAD VDDIO 33"), + PINCTRL_PIN(265, "P PAD VSSIO 33"), + PINCTRL_PIN(266, "PIO EMIF 1 D06"), + PINCTRL_PIN(267, "PO EMIF 1 A06"), + PINCTRL_PIN(268, "PIO EMIF 1 D05"), + PINCTRL_PIN(269, "PO EMIF 1 A05"), + PINCTRL_PIN(270, "P PAD VDDIO 34"), + PINCTRL_PIN(271, "P PAD VSSIO 34"), + PINCTRL_PIN(272, "PIO EMIF 1 D04"), + PINCTRL_PIN(273, "PO EMIF 1 A04"), + PINCTRL_PIN(274, "PIO EMIF 1 D03"), + PINCTRL_PIN(275, "PO EMIF 1 A03"), + PINCTRL_PIN(276, "P PAD VDDIO 35"), + PINCTRL_PIN(277, "P PAD VSSIO 35"), + PINCTRL_PIN(278, "P PAD GND 23"), + PINCTRL_PIN(279, "P PAD VDD 23"), + PINCTRL_PIN(280, "PIO EMIF 1 D02"), + PINCTRL_PIN(281, "PO EMIF 1 A02"), + PINCTRL_PIN(282, "PIO EMIF 1 D01"), + PINCTRL_PIN(283, "PO EMIF 1 A01"), + PINCTRL_PIN(284, "P PAD VDDIO 36"), + PINCTRL_PIN(285, "P PAD VSSIO 36"), + PINCTRL_PIN(286, "PIO EMIF 1 D00"), + PINCTRL_PIN(287, "PO EMIF 1 BE1 N"), + PINCTRL_PIN(288, "PO EMIF 1 BE0 N"), + PINCTRL_PIN(289, "PO EMIF 1 ADV N"), + PINCTRL_PIN(290, "P PAD VDDIO 37"), + PINCTRL_PIN(291, "P PAD VSSIO 37"), + PINCTRL_PIN(292, "PO EMIF 1 SD CKE0"), + PINCTRL_PIN(293, "PO EMIF 1 OE N"), + PINCTRL_PIN(294, "PO EMIF 1 WE N"), + PINCTRL_PIN(295, "P PAD VDDIO 38"), + PINCTRL_PIN(296, "P PAD VSSIO 38"), + PINCTRL_PIN(297, "PO EMIF 1 CLK"), + PINCTRL_PIN(298, "PIO EMIF 1 SD CLK"), + PINCTRL_PIN(299, "P PAD VSSIO 45 (not bonded)"), + PINCTRL_PIN(300, "P PAD VDDIO 42"), + PINCTRL_PIN(301, "P PAD VSSIO 42"), + PINCTRL_PIN(302, "P PAD GND 31"), + PINCTRL_PIN(303, "P PAD VDD 31"), + PINCTRL_PIN(304, "PI EMIF 1 RET CLK"), + PINCTRL_PIN(305, "PI EMIF 1 WAIT N"), + PINCTRL_PIN(306, "PI EMIF 1 NFIF READY"), + PINCTRL_PIN(307, "PO EMIF 1 SD CKE1"), + PINCTRL_PIN(308, "PO EMIF 1 CS3 N"), + PINCTRL_PIN(309, "P PAD VDD 25"), + PINCTRL_PIN(310, "P PAD GND 25"), + PINCTRL_PIN(311, "P PAD VSSIO 39"), + PINCTRL_PIN(312, "P PAD VDDIO 39"), + PINCTRL_PIN(313, "PO EMIF 1 CS2 N"), + PINCTRL_PIN(314, "PO EMIF 1 CS1 N"), + PINCTRL_PIN(315, "PO EMIF 1 CS0 N"), + PINCTRL_PIN(316, "PO ETM TRACE PKT0"), + PINCTRL_PIN(317, "PO ETM TRACE PKT1"), + PINCTRL_PIN(318, "PO ETM TRACE PKT2"), + PINCTRL_PIN(319, "P PAD VDD 30"), + PINCTRL_PIN(320, "P PAD GND 30"), + PINCTRL_PIN(321, "P PAD VSSIO 44"), + PINCTRL_PIN(322, "P PAD VDDIO 44"), + PINCTRL_PIN(323, "PO ETM TRACE PKT3"), + PINCTRL_PIN(324, "PO ETM TRACE PKT4"), + PINCTRL_PIN(325, "PO ETM TRACE PKT5"), + PINCTRL_PIN(326, "PO ETM TRACE PKT6"), + PINCTRL_PIN(327, "PO ETM TRACE PKT7"), + PINCTRL_PIN(328, "PO ETM PIPE STAT0"), + PINCTRL_PIN(329, "P PAD VDD 26"), + PINCTRL_PIN(330, "P PAD GND 26"), + PINCTRL_PIN(331, "P PAD VSSIO 40"), + PINCTRL_PIN(332, "P PAD VDDIO 40"), + PINCTRL_PIN(333, "PO ETM PIPE STAT1"), + PINCTRL_PIN(334, "PO ETM PIPE STAT2"), + PINCTRL_PIN(335, "PO ETM TRACE CLK"), + PINCTRL_PIN(336, "PO ETM TRACE SYNC"), + PINCTRL_PIN(337, "PIO ACC GPIO 33"), + PINCTRL_PIN(338, "PIO ACC GPIO 32"), + PINCTRL_PIN(339, "PIO ACC GPIO 30"), + PINCTRL_PIN(340, "PIO ACC GPIO 29"), + PINCTRL_PIN(341, "P PAD VDDIO 17"), + PINCTRL_PIN(342, "P PAD VSSIO 17"), + PINCTRL_PIN(343, "P PAD GND 15"), + PINCTRL_PIN(344, "P PAD VDD 15"), + PINCTRL_PIN(345, "PIO ACC GPIO 28"), + PINCTRL_PIN(346, "PIO ACC GPIO 27"), + PINCTRL_PIN(347, "PIO ACC GPIO 16"), + PINCTRL_PIN(348, "PI TAP TMS"), + PINCTRL_PIN(349, "PI TAP TDI"), + PINCTRL_PIN(350, "PO TAP TDO"), + PINCTRL_PIN(351, "PI TAP RST N"), + /* Pads along the left edge of the chip */ + PINCTRL_PIN(352, "PI EMU MODE 0"), + PINCTRL_PIN(353, "PO TAP RET CLK"), + PINCTRL_PIN(354, "PI TAP CLK"), + PINCTRL_PIN(355, "PO EMIF 0 SD CS N"), + PINCTRL_PIN(356, "PO EMIF 0 SD CAS N"), + PINCTRL_PIN(357, "PO EMIF 0 SD WE N"), + PINCTRL_PIN(358, "P PAD VDDIO 1"), + PINCTRL_PIN(359, "P PAD VSSIO 1"), + PINCTRL_PIN(360, "P PAD GND 1"), + PINCTRL_PIN(361, "P PAD VDD 1"), + PINCTRL_PIN(362, "PO EMIF 0 SD CKE"), + PINCTRL_PIN(363, "PO EMIF 0 SD DQML"), + PINCTRL_PIN(364, "PO EMIF 0 SD DQMU"), + PINCTRL_PIN(365, "PO EMIF 0 SD RAS N"), + PINCTRL_PIN(366, "PIO EMIF 0 D15"), + PINCTRL_PIN(367, "PO EMIF 0 A15"), + PINCTRL_PIN(368, "PIO EMIF 0 D14"), + PINCTRL_PIN(369, "PO EMIF 0 A14"), + PINCTRL_PIN(370, "PIO EMIF 0 D13"), + PINCTRL_PIN(371, "PO EMIF 0 A13"), + PINCTRL_PIN(372, "P PAD VDDIO 2"), + PINCTRL_PIN(373, "P PAD VSSIO 2"), + PINCTRL_PIN(374, "P PAD GND 2"), + PINCTRL_PIN(375, "P PAD VDD 2"), + PINCTRL_PIN(376, "PIO EMIF 0 D12"), + PINCTRL_PIN(377, "PO EMIF 0 A12"), + PINCTRL_PIN(378, "PIO EMIF 0 D11"), + PINCTRL_PIN(379, "PO EMIF 0 A11"), + PINCTRL_PIN(380, "PIO EMIF 0 D10"), + PINCTRL_PIN(381, "PO EMIF 0 A10"), + PINCTRL_PIN(382, "PIO EMIF 0 D09"), + PINCTRL_PIN(383, "PO EMIF 0 A09"), + PINCTRL_PIN(384, "PIO EMIF 0 D08"), + PINCTRL_PIN(385, "PO EMIF 0 A08"), + PINCTRL_PIN(386, "PIO EMIF 0 D07"), + PINCTRL_PIN(387, "PO EMIF 0 A07"), + PINCTRL_PIN(388, "P PAD VDDIO 3"), + PINCTRL_PIN(389, "P PAD VSSIO 3"), + PINCTRL_PIN(390, "P PAD GND 3"), + PINCTRL_PIN(391, "P PAD VDD 3"), + PINCTRL_PIN(392, "PO EFUSE RDOUT1"), + PINCTRL_PIN(393, "PIO EMIF 0 D06"), + PINCTRL_PIN(394, "PO EMIF 0 A06"), + PINCTRL_PIN(395, "PIO EMIF 0 D05"), + PINCTRL_PIN(396, "PO EMIF 0 A05"), + PINCTRL_PIN(397, "PIO EMIF 0 D04"), + PINCTRL_PIN(398, "PO EMIF 0 A04"), + PINCTRL_PIN(399, "A PADS/A VDDCO1v82v5 GND 80U SF LIN VDDCO AF"), + PINCTRL_PIN(400, "PWR VDDCO AF"), + PINCTRL_PIN(401, "PWR EFUSE HV1"), + PINCTRL_PIN(402, "P PAD VSSIO 4"), + PINCTRL_PIN(403, "P PAD VDDIO 4"), + PINCTRL_PIN(404, "P PAD GND 4"), + PINCTRL_PIN(405, "P PAD VDD 4"), + PINCTRL_PIN(406, "PIO EMIF 0 D03"), + PINCTRL_PIN(407, "PO EMIF 0 A03"), + PINCTRL_PIN(408, "PWR EFUSE HV2"), + PINCTRL_PIN(409, "PWR EFUSE HV3"), + PINCTRL_PIN(410, "PIO EMIF 0 D02"), + PINCTRL_PIN(411, "PO EMIF 0 A02"), + PINCTRL_PIN(412, "PIO EMIF 0 D01"), + PINCTRL_PIN(413, "P PAD VDDIO 5"), + PINCTRL_PIN(414, "P PAD VSSIO 5"), + PINCTRL_PIN(415, "P PAD GND 5"), + PINCTRL_PIN(416, "P PAD VDD 5"), + PINCTRL_PIN(417, "PO EMIF 0 A01"), + PINCTRL_PIN(418, "PIO EMIF 0 D00"), + PINCTRL_PIN(419, "IF 0 SD CLK"), + PINCTRL_PIN(420, "APP SPI CLK"), + PINCTRL_PIN(421, "APP SPI DO"), + PINCTRL_PIN(422, "APP SPI DI"), + PINCTRL_PIN(423, "APP SPI CS0"), + PINCTRL_PIN(424, "APP SPI CS1"), + PINCTRL_PIN(425, "APP SPI CS2"), + PINCTRL_PIN(426, "PIO APP GPIO 10"), + PINCTRL_PIN(427, "P PAD VDDIO 41"), + PINCTRL_PIN(428, "P PAD VSSIO 41"), + PINCTRL_PIN(429, "P PAD GND 6"), + PINCTRL_PIN(430, "P PAD VDD 6"), + PINCTRL_PIN(431, "PIO ACC SDIO0 CMD"), + PINCTRL_PIN(432, "PIO ACC SDIO0 CK"), + PINCTRL_PIN(433, "PIO ACC SDIO0 D3"), + PINCTRL_PIN(434, "PIO ACC SDIO0 D2"), + PINCTRL_PIN(435, "PIO ACC SDIO0 D1"), + PINCTRL_PIN(436, "PIO ACC SDIO0 D0"), + PINCTRL_PIN(437, "PIO USB PU"), + PINCTRL_PIN(438, "PIO USB SP"), + PINCTRL_PIN(439, "PIO USB DAT VP"), + PINCTRL_PIN(440, "PIO USB SE0 VM"), + PINCTRL_PIN(441, "PIO USB OE"), + PINCTRL_PIN(442, "PIO USB SUSP"), + PINCTRL_PIN(443, "P PAD VSSIO 6"), + PINCTRL_PIN(444, "P PAD VDDIO 6"), + PINCTRL_PIN(445, "PIO USB PUEN"), + PINCTRL_PIN(446, "PIO ACC UART0 RX"), + PINCTRL_PIN(447, "PIO ACC UART0 TX"), + PINCTRL_PIN(448, "PIO ACC UART0 CTS"), + PINCTRL_PIN(449, "PIO ACC UART0 RTS"), + PINCTRL_PIN(450, "PIO ACC UART3 RX"), + PINCTRL_PIN(451, "PIO ACC UART3 TX"), + PINCTRL_PIN(452, "PIO ACC UART3 CTS"), + PINCTRL_PIN(453, "PIO ACC UART3 RTS"), + PINCTRL_PIN(454, "PIO ACC IRDA TX"), + PINCTRL_PIN(455, "P PAD VDDIO 7"), + PINCTRL_PIN(456, "P PAD VSSIO 7"), + PINCTRL_PIN(457, "P PAD GND 7"), + PINCTRL_PIN(458, "P PAD VDD 7"), + PINCTRL_PIN(459, "PIO ACC IRDA RX"), + PINCTRL_PIN(460, "PIO ACC PCM I2S CLK"), + PINCTRL_PIN(461, "PIO ACC PCM I2S WS"), + PINCTRL_PIN(462, "PIO ACC PCM I2S DATA A"), + PINCTRL_PIN(463, "PIO ACC PCM I2S DATA B"), + PINCTRL_PIN(464, "PO SIM CLK"), + PINCTRL_PIN(465, "PIO ACC IRDA SD"), + PINCTRL_PIN(466, "PIO SIM DATA"), +}; + +/** + * @dev: a pointer back to containing device + * @virtbase: the offset to the controller in virtual memory + */ +struct u300_pmx { + struct device *dev; + struct pinctrl_dev *pctl; + u32 phybase; + u32 physize; + void __iomem *virtbase; +}; + +/** + * u300_pmx_registers - the array of registers read/written for each pinmux + * shunt setting + */ +const u32 u300_pmx_registers[] = { + U300_SYSCON_PMC1LR, + U300_SYSCON_PMC1HR, + U300_SYSCON_PMC2R, + U300_SYSCON_PMC3R, + U300_SYSCON_PMC4R, +}; + +/** + * struct u300_pin_group - describes a U300 pin group + * @name: the name of this specific pin group + * @pins: an array of discrete physical pins used in this group, taken + * from the driver-local pin enumeration space + * @num_pins: the number of pins in this group array, i.e. the number of + * elements in .pins so we can iterate over that array + */ +struct u300_pin_group { + const char *name; + const unsigned int *pins; + const unsigned num_pins; +}; + +/** + * struct pmx_onmask - mask bits to enable/disable padmux + * @mask: mask bits to disable + * @val: mask bits to enable + * + * onmask lazy dog: + * onmask = { + * {"PMC1LR" mask, "PMC1LR" value}, + * {"PMC1HR" mask, "PMC1HR" value}, + * {"PMC2R" mask, "PMC2R" value}, + * {"PMC3R" mask, "PMC3R" value}, + * {"PMC4R" mask, "PMC4R" value} + * } + */ +struct u300_pmx_mask { + u16 mask; + u16 bits; +}; + +/* The chip power pins are VDD, GND, VDDIO and VSSIO */ +static const unsigned power_pins[] = { 0, 1, 3, 31, 46, 47, 49, 50, 61, 62, 63, + 64, 78, 79, 80, 81, 92, 93, 94, 95, 101, 102, 103, 104, 115, 116, 117, + 118, 130, 131, 132, 133, 145, 146, 147, 148, 159, 160, 172, 173, 174, + 175, 187, 188, 189, 190, 201, 202, 211, 212, 213, 214, 215, 218, 223, + 224, 225, 226, 231, 232, 237, 238, 239, 240, 245, 246, 251, 252, 256, + 257, 258, 259, 264, 265, 270, 271, 276, 277, 278, 279, 284, 285, 290, + 291, 295, 296, 299, 300, 301, 302, 303, 309, 310, 311, 312, 319, 320, + 321, 322, 329, 330, 331, 332, 341, 342, 343, 344, 358, 359, 360, 361, + 372, 373, 374, 375, 388, 389, 390, 391, 402, 403, 404, 405, 413, 414, + 415, 416, 427, 428, 429, 430, 443, 444, 455, 456, 457, 458 }; +static const unsigned emif0_pins[] = { 355, 356, 357, 362, 363, 364, 365, 366, + 367, 368, 369, 370, 371, 376, 377, 378, 379, 380, 381, 382, 383, 384, + 385, 386, 387, 393, 394, 395, 396, 397, 398, 406, 407, 410, 411, 412, + 417, 418 }; +static const unsigned emif1_pins[] = { 216, 217, 219, 220, 221, 222, 227, 228, + 229, 230, 233, 234, 235, 236, 241, 242, 243, 244, 247, 248, 249, 250, + 253, 254, 255, 260, 261, 262, 263, 266, 267, 268, 269, 272, 273, 274, + 275, 280, 281, 282, 283, 286, 287, 288, 289, 292, 293, 294, 297, 298, + 304, 305, 306, 307, 308, 313, 314, 315 }; +static const unsigned uart0_pins[] = { 134, 135, 136, 137 }; +static const unsigned mmc0_pins[] = { 166, 167, 168, 169, 170, 171, 176, 177 }; +static const unsigned spi0_pins[] = { 420, 421, 422, 423, 424, 425 }; + +static const struct u300_pmx_mask emif0_mask[] = { + {0, 0}, + {0, 0}, + {0, 0}, + {0, 0}, + {0, 0}, +}; + +static const struct u300_pmx_mask emif1_mask[] = { + /* + * This connects the SDRAM to CS2 and a NAND flash to + * CS0 on the EMIF. + */ + { + U300_SYSCON_PMC1LR_EMIF_1_CS2_MASK | + U300_SYSCON_PMC1LR_EMIF_1_CS1_MASK | + U300_SYSCON_PMC1LR_EMIF_1_CS0_MASK | + U300_SYSCON_PMC1LR_EMIF_1_MASK, + U300_SYSCON_PMC1LR_EMIF_1_CS2_SDRAM | + U300_SYSCON_PMC1LR_EMIF_1_CS1_STATIC | + U300_SYSCON_PMC1LR_EMIF_1_CS0_NFIF | + U300_SYSCON_PMC1LR_EMIF_1_SDRAM0 + }, + {0, 0}, + {0, 0}, + {0, 0}, + {0, 0}, +}; + +static const struct u300_pmx_mask uart0_mask[] = { + {0, 0}, + { + U300_SYSCON_PMC1HR_APP_UART0_1_MASK | + U300_SYSCON_PMC1HR_APP_UART0_2_MASK, + U300_SYSCON_PMC1HR_APP_UART0_1_UART0 | + U300_SYSCON_PMC1HR_APP_UART0_2_UART0 + }, + {0, 0}, + {0, 0}, + {0, 0}, +}; + +static const struct u300_pmx_mask mmc0_mask[] = { + { U300_SYSCON_PMC1LR_MMCSD_MASK, U300_SYSCON_PMC1LR_MMCSD_MMCSD}, + {0, 0}, + {0, 0}, + {0, 0}, + { U300_SYSCON_PMC4R_APP_MISC_12_MASK, + U300_SYSCON_PMC4R_APP_MISC_12_APP_GPIO } +}; + +static const struct u300_pmx_mask spi0_mask[] = { + {0, 0}, + { + U300_SYSCON_PMC1HR_APP_SPI_2_MASK | + U300_SYSCON_PMC1HR_APP_SPI_CS_1_MASK | + U300_SYSCON_PMC1HR_APP_SPI_CS_2_MASK, + U300_SYSCON_PMC1HR_APP_SPI_2_SPI | + U300_SYSCON_PMC1HR_APP_SPI_CS_1_SPI | + U300_SYSCON_PMC1HR_APP_SPI_CS_2_SPI + }, + {0, 0}, + {0, 0}, + {0, 0} +}; + +static const struct u300_pin_group u300_pin_groups[] = { + { + .name = "powergrp", + .pins = power_pins, + .num_pins = ARRAY_SIZE(power_pins), + }, + { + .name = "emif0grp", + .pins = emif0_pins, + .num_pins = ARRAY_SIZE(emif0_pins), + }, + { + .name = "emif1grp", + .pins = emif1_pins, + .num_pins = ARRAY_SIZE(emif1_pins), + }, + { + .name = "uart0grp", + .pins = uart0_pins, + .num_pins = ARRAY_SIZE(uart0_pins), + }, + { + .name = "mmc0grp", + .pins = mmc0_pins, + .num_pins = ARRAY_SIZE(mmc0_pins), + }, + { + .name = "spi0grp", + .pins = spi0_pins, + .num_pins = ARRAY_SIZE(spi0_pins), + }, +}; + +static int u300_list_groups(struct pinctrl_dev *pctldev, unsigned selector) +{ + if (selector >= ARRAY_SIZE(u300_pin_groups)) + return -EINVAL; + return 0; +} + +static const char *u300_get_group_name(struct pinctrl_dev *pctldev, + unsigned selector) +{ + if (selector >= ARRAY_SIZE(u300_pin_groups)) + return NULL; + return u300_pin_groups[selector].name; +} + +static int u300_get_group_pins(struct pinctrl_dev *pctldev, unsigned selector, + const unsigned **pins, + unsigned *num_pins) +{ + if (selector >= ARRAY_SIZE(u300_pin_groups)) + return -EINVAL; + *pins = u300_pin_groups[selector].pins; + *num_pins = u300_pin_groups[selector].num_pins; + return 0; +} + +static void u300_pin_dbg_show(struct pinctrl_dev *pctldev, struct seq_file *s, + unsigned offset) +{ + seq_printf(s, " " DRIVER_NAME); +} + +static struct pinctrl_ops u300_pctrl_ops = { + .list_groups = u300_list_groups, + .get_group_name = u300_get_group_name, + .get_group_pins = u300_get_group_pins, + .pin_dbg_show = u300_pin_dbg_show, +}; + +/* + * Here we define the available functions and their corresponding pin groups + */ + +/** + * struct u300_pmx_func - describes U300 pinmux functions + * @name: the name of this specific function + * @groups: corresponding pin groups + * @onmask: bits to set to enable this when doing pin muxing + */ +struct u300_pmx_func { + const char *name; + const char * const *groups; + const unsigned num_groups; + const struct u300_pmx_mask *mask; +}; + +static const char * const powergrps[] = { "powergrp" }; +static const char * const emif0grps[] = { "emif0grp" }; +static const char * const emif1grps[] = { "emif1grp" }; +static const char * const uart0grps[] = { "uart0grp" }; +static const char * const mmc0grps[] = { "mmc0grp" }; +static const char * const spi0grps[] = { "spi0grp" }; + +static const struct u300_pmx_func u300_pmx_functions[] = { + { + .name = "power", + .groups = powergrps, + .num_groups = ARRAY_SIZE(powergrps), + /* Mask is N/A */ + }, + { + .name = "emif0", + .groups = emif0grps, + .num_groups = ARRAY_SIZE(emif0grps), + .mask = emif0_mask, + }, + { + .name = "emif1", + .groups = emif1grps, + .num_groups = ARRAY_SIZE(emif1grps), + .mask = emif1_mask, + }, + { + .name = "uart0", + .groups = uart0grps, + .num_groups = ARRAY_SIZE(uart0grps), + .mask = uart0_mask, + }, + { + .name = "mmc0", + .groups = mmc0grps, + .num_groups = ARRAY_SIZE(mmc0grps), + .mask = mmc0_mask, + }, + { + .name = "spi0", + .groups = spi0grps, + .num_groups = ARRAY_SIZE(spi0grps), + .mask = spi0_mask, + }, +}; + +static void u300_pmx_endisable(struct u300_pmx *upmx, unsigned selector, + bool enable) +{ + u16 regval, val, mask; + int i; + + for (i = 0; i < ARRAY_SIZE(u300_pmx_registers); i++) { + if (enable) + val = u300_pmx_functions[selector].mask->bits; + else + val = 0; + + mask = u300_pmx_functions[selector].mask->mask; + if (mask != 0) { + regval = readw(upmx->virtbase + u300_pmx_registers[i]); + regval &= ~mask; + regval |= val; + writew(regval, upmx->virtbase + u300_pmx_registers[i]); + } + } +} + +static int u300_pmx_enable(struct pinctrl_dev *pctldev, unsigned selector, + unsigned group) +{ + struct u300_pmx *upmx; + + /* There is nothing to do with the power pins */ + if (selector == 0) + return 0; + + upmx = pinctrl_dev_get_drvdata(pctldev); + u300_pmx_endisable(upmx, selector, true); + + return 0; +} + +static void u300_pmx_disable(struct pinctrl_dev *pctldev, unsigned selector, + unsigned group) +{ + struct u300_pmx *upmx; + + /* There is nothing to do with the power pins */ + if (selector == 0) + return; + + upmx = pinctrl_dev_get_drvdata(pctldev); + u300_pmx_endisable(upmx, selector, false); +} + +static int u300_pmx_list_funcs(struct pinctrl_dev *pctldev, unsigned selector) +{ + if (selector >= ARRAY_SIZE(u300_pmx_functions)) + return -EINVAL; + return 0; +} + +static const char *u300_pmx_get_func_name(struct pinctrl_dev *pctldev, + unsigned selector) +{ + return u300_pmx_functions[selector].name; +} + +static int u300_pmx_get_groups(struct pinctrl_dev *pctldev, unsigned selector, + const char * const **groups, + unsigned * const num_groups) +{ + *groups = u300_pmx_functions[selector].groups; + *num_groups = u300_pmx_functions[selector].num_groups; + return 0; +} + +static struct pinmux_ops u300_pmx_ops = { + .list_functions = u300_pmx_list_funcs, + .get_function_name = u300_pmx_get_func_name, + .get_function_groups = u300_pmx_get_groups, + .enable = u300_pmx_enable, + .disable = u300_pmx_disable, +}; + +/* + * FIXME: this will be set to sane values as this driver engulfs + * drivers/gpio/gpio-u300.c and we really know this stuff. + */ +static struct pinctrl_gpio_range u300_gpio_range = { + .name = "COH901*", + .id = 0, + .base = 0, + .npins = 64, +}; + +static struct pinctrl_desc u300_pmx_desc = { + .name = DRIVER_NAME, + .pins = u300_pads, + .npins = ARRAY_SIZE(u300_pads), + .maxpin = U300_NUM_PADS-1, + .pctlops = &u300_pctrl_ops, + .pmxops = &u300_pmx_ops, + .owner = THIS_MODULE, +}; + +static int __init u300_pmx_probe(struct platform_device *pdev) +{ + int ret; + struct u300_pmx *upmx; + struct resource *res; + + /* Create state holders etc for this driver */ + upmx = devm_kzalloc(&pdev->dev, sizeof(*upmx), GFP_KERNEL); + if (!upmx) + return -ENOMEM; + + upmx->dev = &pdev->dev; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + ret = -ENOENT; + goto out_no_resource; + } + upmx->phybase = res->start; + upmx->physize = resource_size(res); + + if (request_mem_region(upmx->phybase, upmx->physize, + DRIVER_NAME) == NULL) { + ret = -ENOMEM; + goto out_no_memregion; + } + + upmx->virtbase = ioremap(upmx->phybase, upmx->physize); + if (!upmx->virtbase) { + ret = -ENOMEM; + goto out_no_remap; + } + + upmx->pctl = pinctrl_register(&u300_pmx_desc, &pdev->dev, upmx); + if (!upmx->pctl) { + dev_err(&pdev->dev, "could not register U300 pinmux driver\n"); + ret = -EINVAL; + goto out_no_pmx; + } + + /* We will handle a range of GPIO pins */ + pinctrl_add_gpio_range(upmx->pctl, &u300_gpio_range); + + platform_set_drvdata(pdev, upmx); + + dev_info(&pdev->dev, "initialized U300 pinmux driver\n"); + + return 0; + +out_no_pmx: + iounmap(upmx->virtbase); +out_no_remap: + platform_set_drvdata(pdev, NULL); +out_no_memregion: + release_mem_region(upmx->phybase, upmx->physize); +out_no_resource: + devm_kfree(&pdev->dev, upmx); + return ret; +} + +static int __exit u300_pmx_remove(struct platform_device *pdev) +{ + struct u300_pmx *upmx = platform_get_drvdata(pdev); + + pinctrl_remove_gpio_range(upmx->pctl, &u300_gpio_range); + pinctrl_unregister(upmx->pctl); + iounmap(upmx->virtbase); + release_mem_region(upmx->phybase, upmx->physize); + platform_set_drvdata(pdev, NULL); + devm_kfree(&pdev->dev, upmx); + + return 0; +} + +static struct platform_driver u300_pmx_driver = { + .driver = { + .name = DRIVER_NAME, + .owner = THIS_MODULE, + }, + .remove = __exit_p(u300_pmx_remove), +}; + +static int __init u300_pmx_init(void) +{ + return platform_driver_probe(&u300_pmx_driver, u300_pmx_probe); +} +arch_initcall(u300_pmx_init); + +static void __exit u300_pmx_exit(void) +{ + platform_driver_unregister(&u300_pmx_driver); +} +module_exit(u300_pmx_exit); + +MODULE_AUTHOR("Linus Walleij <linus.walleij@linaro.org>"); +MODULE_DESCRIPTION("U300 pin control driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/pinctrl/pinmux.c b/drivers/pinctrl/pinmux.c new file mode 100644 index 00000000000..a5467f8709e --- /dev/null +++ b/drivers/pinctrl/pinmux.c @@ -0,0 +1,1190 @@ +/* + * Core driver for the pin muxing portions of the pin control subsystem + * + * Copyright (C) 2011 ST-Ericsson SA + * Written on behalf of Linaro for ST-Ericsson + * Based on bits of regulator core, gpio core and clk core + * + * Author: Linus Walleij <linus.walleij@linaro.org> + * + * License terms: GNU General Public License (GPL) version 2 + */ +#define pr_fmt(fmt) "pinmux core: " fmt + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/device.h> +#include <linux/slab.h> +#include <linux/radix-tree.h> +#include <linux/err.h> +#include <linux/list.h> +#include <linux/mutex.h> +#include <linux/spinlock.h> +#include <linux/sysfs.h> +#include <linux/debugfs.h> +#include <linux/seq_file.h> +#include <linux/pinctrl/machine.h> +#include <linux/pinctrl/pinmux.h> +#include "core.h" + +/* List of pinmuxes */ +static DEFINE_MUTEX(pinmux_list_mutex); +static LIST_HEAD(pinmux_list); + +/* List of pinmux hogs */ +static DEFINE_MUTEX(pinmux_hoglist_mutex); +static LIST_HEAD(pinmux_hoglist); + +/* Global pinmux maps, we allow one set only */ +static struct pinmux_map const *pinmux_maps; +static unsigned pinmux_maps_num; + +/** + * struct pinmux_group - group list item for pinmux groups + * @node: pinmux group list node + * @group_selector: the group selector for this group + */ +struct pinmux_group { + struct list_head node; + unsigned group_selector; +}; + +/** + * struct pinmux - per-device pinmux state holder + * @node: global list node + * @dev: the device using this pinmux + * @usecount: the number of active users of this mux setting, used to keep + * track of nested use cases + * @pins: an array of discrete physical pins used in this mapping, taken + * from the global pin enumeration space (copied from pinmux map) + * @num_pins: the number of pins in this mapping array, i.e. the number of + * elements in .pins so we can iterate over that array (copied from + * pinmux map) + * @pctldev: pin control device handling this pinmux + * @func_selector: the function selector for the pinmux device handling + * this pinmux + * @groups: the group selectors for the pinmux device and + * selector combination handling this pinmux, this is a list that + * will be traversed on all pinmux operations such as + * get/put/enable/disable + * @mutex: a lock for the pinmux state holder + */ +struct pinmux { + struct list_head node; + struct device *dev; + unsigned usecount; + struct pinctrl_dev *pctldev; + unsigned func_selector; + struct list_head groups; + struct mutex mutex; +}; + +/** + * struct pinmux_hog - a list item to stash mux hogs + * @node: pinmux hog list node + * @map: map entry responsible for this hogging + * @pmx: the pinmux hogged by this item + */ +struct pinmux_hog { + struct list_head node; + struct pinmux_map const *map; + struct pinmux *pmx; +}; + +/** + * pin_request() - request a single pin to be muxed in, typically for GPIO + * @pin: the pin number in the global pin space + * @function: a functional name to give to this pin, passed to the driver + * so it knows what function to mux in, e.g. the string "gpioNN" + * means that you want to mux in the pin for use as GPIO number NN + * @gpio: if this request concerns a single GPIO pin + * @gpio_range: the range matching the GPIO pin if this is a request for a + * single GPIO pin + */ +static int pin_request(struct pinctrl_dev *pctldev, + int pin, const char *function, bool gpio, + struct pinctrl_gpio_range *gpio_range) +{ + struct pin_desc *desc; + const struct pinmux_ops *ops = pctldev->desc->pmxops; + int status = -EINVAL; + + dev_dbg(&pctldev->dev, "request pin %d for %s\n", pin, function); + + if (!pin_is_valid(pctldev, pin)) { + dev_err(&pctldev->dev, "pin is invalid\n"); + return -EINVAL; + } + + if (!function) { + dev_err(&pctldev->dev, "no function name given\n"); + return -EINVAL; + } + + desc = pin_desc_get(pctldev, pin); + if (desc == NULL) { + dev_err(&pctldev->dev, + "pin is not registered so it cannot be requested\n"); + goto out; + } + + spin_lock(&desc->lock); + if (desc->mux_function) { + spin_unlock(&desc->lock); + dev_err(&pctldev->dev, + "pin already requested\n"); + goto out; + } + desc->mux_function = function; + spin_unlock(&desc->lock); + + /* Let each pin increase references to this module */ + if (!try_module_get(pctldev->owner)) { + dev_err(&pctldev->dev, + "could not increase module refcount for pin %d\n", + pin); + status = -EINVAL; + goto out_free_pin; + } + + /* + * If there is no kind of request function for the pin we just assume + * we got it by default and proceed. + */ + if (gpio && ops->gpio_request_enable) + /* This requests and enables a single GPIO pin */ + status = ops->gpio_request_enable(pctldev, gpio_range, pin); + else if (ops->request) + status = ops->request(pctldev, pin); + else + status = 0; + + if (status) + dev_err(&pctldev->dev, "->request on device %s failed " + "for pin %d\n", + pctldev->desc->name, pin); +out_free_pin: + if (status) { + spin_lock(&desc->lock); + desc->mux_function = NULL; + spin_unlock(&desc->lock); + } +out: + if (status) + dev_err(&pctldev->dev, "pin-%d (%s) status %d\n", + pin, function ? : "?", status); + + return status; +} + +/** + * pin_free() - release a single muxed in pin so something else can be muxed + * @pctldev: pin controller device handling this pin + * @pin: the pin to free + * @free_func: whether to free the pin's assigned function name string + */ +static void pin_free(struct pinctrl_dev *pctldev, int pin, int free_func) +{ + const struct pinmux_ops *ops = pctldev->desc->pmxops; + struct pin_desc *desc; + + desc = pin_desc_get(pctldev, pin); + if (desc == NULL) { + dev_err(&pctldev->dev, + "pin is not registered so it cannot be freed\n"); + return; + } + + if (ops->free) + ops->free(pctldev, pin); + + spin_lock(&desc->lock); + if (free_func) + kfree(desc->mux_function); + desc->mux_function = NULL; + spin_unlock(&desc->lock); + module_put(pctldev->owner); +} + +/** + * pinmux_request_gpio() - request a single pin to be muxed in as GPIO + * @gpio: the GPIO pin number from the GPIO subsystem number space + */ +int pinmux_request_gpio(unsigned gpio) +{ + char gpiostr[16]; + const char *function; + struct pinctrl_dev *pctldev; + struct pinctrl_gpio_range *range; + int ret; + int pin; + + ret = pinctrl_get_device_gpio_range(gpio, &pctldev, &range); + if (ret) + return -EINVAL; + + /* Convert to the pin controllers number space */ + pin = gpio - range->base; + + /* Conjure some name stating what chip and pin this is taken by */ + snprintf(gpiostr, 15, "%s:%d", range->name, gpio); + + function = kstrdup(gpiostr, GFP_KERNEL); + if (!function) + return -EINVAL; + + ret = pin_request(pctldev, pin, function, true, range); + if (ret < 0) + kfree(function); + + return ret; +} +EXPORT_SYMBOL_GPL(pinmux_request_gpio); + +/** + * pinmux_free_gpio() - free a single pin, currently used as GPIO + * @gpio: the GPIO pin number from the GPIO subsystem number space + */ +void pinmux_free_gpio(unsigned gpio) +{ + struct pinctrl_dev *pctldev; + struct pinctrl_gpio_range *range; + int ret; + int pin; + + ret = pinctrl_get_device_gpio_range(gpio, &pctldev, &range); + if (ret) + return; + + /* Convert to the pin controllers number space */ + pin = gpio - range->base; + + pin_free(pctldev, pin, true); +} +EXPORT_SYMBOL_GPL(pinmux_free_gpio); + +/** + * pinmux_register_mappings() - register a set of pinmux mappings + * @maps: the pinmux mappings table to register + * @num_maps: the number of maps in the mapping table + * + * Only call this once during initialization of your machine, the function is + * tagged as __init and won't be callable after init has completed. The map + * passed into this function will be owned by the pinmux core and cannot be + * free:d. + */ +int __init pinmux_register_mappings(struct pinmux_map const *maps, + unsigned num_maps) +{ + int i; + + if (pinmux_maps != NULL) { + pr_err("pinmux mappings already registered, you can only " + "register one set of maps\n"); + return -EINVAL; + } + + pr_debug("add %d pinmux maps\n", num_maps); + for (i = 0; i < num_maps; i++) { + /* Sanity check the mapping */ + if (!maps[i].name) { + pr_err("failed to register map %d: " + "no map name given\n", i); + return -EINVAL; + } + if (!maps[i].ctrl_dev && !maps[i].ctrl_dev_name) { + pr_err("failed to register map %s (%d): " + "no pin control device given\n", + maps[i].name, i); + return -EINVAL; + } + if (!maps[i].function) { + pr_err("failed to register map %s (%d): " + "no function ID given\n", maps[i].name, i); + return -EINVAL; + } + + if (!maps[i].dev && !maps[i].dev_name) + pr_debug("add system map %s function %s with no device\n", + maps[i].name, + maps[i].function); + else + pr_debug("register map %s, function %s\n", + maps[i].name, + maps[i].function); + } + + pinmux_maps = maps; + pinmux_maps_num = num_maps; + + return 0; +} + +/** + * acquire_pins() - acquire all the pins for a certain funcion on a pinmux + * @pctldev: the device to take the pins on + * @func_selector: the function selector to acquire the pins for + * @group_selector: the group selector containing the pins to acquire + */ +static int acquire_pins(struct pinctrl_dev *pctldev, + unsigned func_selector, + unsigned group_selector) +{ + const struct pinctrl_ops *pctlops = pctldev->desc->pctlops; + const struct pinmux_ops *pmxops = pctldev->desc->pmxops; + const char *func = pmxops->get_function_name(pctldev, + func_selector); + const unsigned *pins; + unsigned num_pins; + int ret; + int i; + + ret = pctlops->get_group_pins(pctldev, group_selector, + &pins, &num_pins); + if (ret) + return ret; + + dev_dbg(&pctldev->dev, "requesting the %u pins from group %u\n", + num_pins, group_selector); + + /* Try to allocate all pins in this group, one by one */ + for (i = 0; i < num_pins; i++) { + ret = pin_request(pctldev, pins[i], func, false, NULL); + if (ret) { + dev_err(&pctldev->dev, + "could not get pin %d for function %s " + "on device %s - conflicting mux mappings?\n", + pins[i], func ? : "(undefined)", + pinctrl_dev_get_name(pctldev)); + /* On error release all taken pins */ + i--; /* this pin just failed */ + for (; i >= 0; i--) + pin_free(pctldev, pins[i], false); + return -ENODEV; + } + } + return 0; +} + +/** + * release_pins() - release pins taken by earlier acquirement + * @pctldev: the device to free the pinx on + * @group_selector: the group selector containing the pins to free + */ +static void release_pins(struct pinctrl_dev *pctldev, + unsigned group_selector) +{ + const struct pinctrl_ops *pctlops = pctldev->desc->pctlops; + const unsigned *pins; + unsigned num_pins; + int ret; + int i; + + ret = pctlops->get_group_pins(pctldev, group_selector, + &pins, &num_pins); + if (ret) { + dev_err(&pctldev->dev, "could not get pins to release for " + "group selector %d\n", + group_selector); + return; + } + for (i = 0; i < num_pins; i++) + pin_free(pctldev, pins[i], false); +} + +/** + * pinmux_get_group_selector() - returns the group selector for a group + * @pctldev: the pin controller handling the group + * @pin_group: the pin group to look up + */ +static int pinmux_get_group_selector(struct pinctrl_dev *pctldev, + const char *pin_group) +{ + const struct pinctrl_ops *pctlops = pctldev->desc->pctlops; + unsigned group_selector = 0; + + while (pctlops->list_groups(pctldev, group_selector) >= 0) { + const char *gname = pctlops->get_group_name(pctldev, + group_selector); + if (!strcmp(gname, pin_group)) { + dev_dbg(&pctldev->dev, + "found group selector %u for %s\n", + group_selector, + pin_group); + return group_selector; + } + + group_selector++; + } + + dev_err(&pctldev->dev, "does not have pin group %s\n", + pin_group); + + return -EINVAL; +} + +/** + * pinmux_check_pin_group() - check function and pin group combo + * @pctldev: device to check the pin group vs function for + * @func_selector: the function selector to check the pin group for, we have + * already looked this up in the calling function + * @pin_group: the pin group to match to the function + * + * This function will check that the pinmux driver can supply the + * selected pin group for a certain function, returns the group selector if + * the group and function selector will work fine together, else returns + * negative + */ +static int pinmux_check_pin_group(struct pinctrl_dev *pctldev, + unsigned func_selector, + const char *pin_group) +{ + const struct pinmux_ops *pmxops = pctldev->desc->pmxops; + const struct pinctrl_ops *pctlops = pctldev->desc->pctlops; + int ret; + + /* + * If the driver does not support different pin groups for the + * functions, we only support group 0, and assume this exists. + */ + if (!pctlops || !pctlops->list_groups) + return 0; + + /* + * Passing NULL (no specific group) will select the first and + * hopefully only group of pins available for this function. + */ + if (!pin_group) { + char const * const *groups; + unsigned num_groups; + + ret = pmxops->get_function_groups(pctldev, func_selector, + &groups, &num_groups); + if (ret) + return ret; + if (num_groups < 1) + return -EINVAL; + ret = pinmux_get_group_selector(pctldev, groups[0]); + if (ret < 0) { + dev_err(&pctldev->dev, + "function %s wants group %s but the pin " + "controller does not seem to have that group\n", + pmxops->get_function_name(pctldev, func_selector), + groups[0]); + return ret; + } + + if (num_groups > 1) + dev_dbg(&pctldev->dev, + "function %s support more than one group, " + "default-selecting first group %s (%d)\n", + pmxops->get_function_name(pctldev, func_selector), + groups[0], + ret); + + return ret; + } + + dev_dbg(&pctldev->dev, + "check if we have pin group %s on controller %s\n", + pin_group, pinctrl_dev_get_name(pctldev)); + + ret = pinmux_get_group_selector(pctldev, pin_group); + if (ret < 0) { + dev_dbg(&pctldev->dev, + "%s does not support pin group %s with function %s\n", + pinctrl_dev_get_name(pctldev), + pin_group, + pmxops->get_function_name(pctldev, func_selector)); + } + return ret; +} + +/** + * pinmux_search_function() - check pin control driver for a certain function + * @pctldev: device to check for function and position + * @map: function map containing the function and position to look for + * @func_selector: returns the applicable function selector if found + * @group_selector: returns the applicable group selector if found + * + * This will search the pinmux driver for an applicable + * function with a specific pin group, returns 0 if these can be mapped + * negative otherwise + */ +static int pinmux_search_function(struct pinctrl_dev *pctldev, + struct pinmux_map const *map, + unsigned *func_selector, + unsigned *group_selector) +{ + const struct pinmux_ops *ops = pctldev->desc->pmxops; + unsigned selector = 0; + + /* See if this pctldev has this function */ + while (ops->list_functions(pctldev, selector) >= 0) { + const char *fname = ops->get_function_name(pctldev, + selector); + int ret; + + if (!strcmp(map->function, fname)) { + /* Found the function, check pin group */ + ret = pinmux_check_pin_group(pctldev, selector, + map->group); + if (ret < 0) + return ret; + + /* This function and group selector can be used */ + *func_selector = selector; + *group_selector = ret; + return 0; + + } + selector++; + } + + pr_err("%s does not support function %s\n", + pinctrl_dev_get_name(pctldev), map->function); + return -EINVAL; +} + +/** + * pinmux_enable_muxmap() - enable a map entry for a certain pinmux + */ +static int pinmux_enable_muxmap(struct pinctrl_dev *pctldev, + struct pinmux *pmx, + struct device *dev, + const char *devname, + struct pinmux_map const *map) +{ + unsigned func_selector; + unsigned group_selector; + struct pinmux_group *grp; + int ret; + + /* + * Note that we're not locking the pinmux mutex here, because + * this is only called at pinmux initialization time when it + * has not been added to any list and thus is not reachable + * by anyone else. + */ + + if (pmx->pctldev && pmx->pctldev != pctldev) { + dev_err(&pctldev->dev, + "different pin control devices given for device %s, " + "function %s\n", + devname, + map->function); + return -EINVAL; + } + pmx->dev = dev; + pmx->pctldev = pctldev; + + /* Now go into the driver and try to match a function and group */ + ret = pinmux_search_function(pctldev, map, &func_selector, + &group_selector); + if (ret < 0) + return ret; + + /* + * If the function selector is already set, it needs to be identical, + * we support several groups with one function but not several + * functions with one or several groups in the same pinmux. + */ + if (pmx->func_selector != UINT_MAX && + pmx->func_selector != func_selector) { + dev_err(&pctldev->dev, + "dual function defines in the map for device %s\n", + devname); + return -EINVAL; + } + pmx->func_selector = func_selector; + + /* Now add this group selector, we may have many of them */ + grp = kmalloc(sizeof(struct pinmux_group), GFP_KERNEL); + if (!grp) + return -ENOMEM; + grp->group_selector = group_selector; + ret = acquire_pins(pctldev, func_selector, group_selector); + if (ret) { + kfree(grp); + return ret; + } + list_add(&grp->node, &pmx->groups); + + return 0; +} + +static void pinmux_free_groups(struct pinmux *pmx) +{ + struct list_head *node, *tmp; + + list_for_each_safe(node, tmp, &pmx->groups) { + struct pinmux_group *grp = + list_entry(node, struct pinmux_group, node); + /* Release all pins taken by this group */ + release_pins(pmx->pctldev, grp->group_selector); + list_del(node); + kfree(grp); + } +} + +/** + * pinmux_get() - retrieves the pinmux for a certain device + * @dev: the device to get the pinmux for + * @name: an optional specific mux mapping name or NULL, the name is only + * needed if you want to have more than one mapping per device, or if you + * need an anonymous pinmux (not tied to any specific device) + */ +struct pinmux *pinmux_get(struct device *dev, const char *name) +{ + + struct pinmux_map const *map = NULL; + struct pinctrl_dev *pctldev = NULL; + const char *devname = NULL; + struct pinmux *pmx; + bool found_map; + unsigned num_maps = 0; + int ret = -ENODEV; + int i; + + /* We must have dev or ID or both */ + if (!dev && !name) + return ERR_PTR(-EINVAL); + + if (dev) + devname = dev_name(dev); + + pr_debug("get mux %s for device %s\n", name, + devname ? devname : "(none)"); + + /* + * create the state cookie holder struct pinmux for each + * mapping, this is what consumers will get when requesting + * a pinmux handle with pinmux_get() + */ + pmx = kzalloc(sizeof(struct pinmux), GFP_KERNEL); + if (pmx == NULL) + return ERR_PTR(-ENOMEM); + mutex_init(&pmx->mutex); + pmx->func_selector = UINT_MAX; + INIT_LIST_HEAD(&pmx->groups); + + /* Iterate over the pinmux maps to locate the right ones */ + for (i = 0; i < pinmux_maps_num; i++) { + map = &pinmux_maps[i]; + found_map = false; + + /* + * First, try to find the pctldev given in the map + */ + pctldev = get_pinctrl_dev_from_dev(map->ctrl_dev, + map->ctrl_dev_name); + if (!pctldev) { + const char *devname = NULL; + + if (map->ctrl_dev) + devname = dev_name(map->ctrl_dev); + else if (map->ctrl_dev_name) + devname = map->ctrl_dev_name; + + pr_warning("could not find a pinctrl device for pinmux " + "function %s, fishy, they shall all have one\n", + map->function); + pr_warning("given pinctrl device name: %s", + devname ? devname : "UNDEFINED"); + + /* Continue to check the other mappings anyway... */ + continue; + } + + pr_debug("in map, found pctldev %s to handle function %s", + dev_name(&pctldev->dev), map->function); + + + /* + * If we're looking for a specific named map, this must match, + * else we loop and look for the next. + */ + if (name != NULL) { + if (map->name == NULL) + continue; + if (strcmp(map->name, name)) + continue; + } + + /* + * This is for the case where no device name is given, we + * already know that the function name matches from above + * code. + */ + if (!map->dev_name && (name != NULL)) + found_map = true; + + /* If the mapping has a device set up it must match */ + if (map->dev_name && + (!devname || !strcmp(map->dev_name, devname))) + /* MATCH! */ + found_map = true; + + /* If this map is applicable, then apply it */ + if (found_map) { + ret = pinmux_enable_muxmap(pctldev, pmx, dev, + devname, map); + if (ret) { + pinmux_free_groups(pmx); + kfree(pmx); + return ERR_PTR(ret); + } + num_maps++; + } + } + + + /* We should have atleast one map, right */ + if (!num_maps) { + pr_err("could not find any mux maps for device %s, ID %s\n", + devname ? devname : "(anonymous)", + name ? name : "(undefined)"); + kfree(pmx); + return ERR_PTR(-EINVAL); + } + + pr_debug("found %u mux maps for device %s, UD %s\n", + num_maps, + devname ? devname : "(anonymous)", + name ? name : "(undefined)"); + + /* Add the pinmux to the global list */ + mutex_lock(&pinmux_list_mutex); + list_add(&pmx->node, &pinmux_list); + mutex_unlock(&pinmux_list_mutex); + + return pmx; +} +EXPORT_SYMBOL_GPL(pinmux_get); + +/** + * pinmux_put() - release a previously claimed pinmux + * @pmx: a pinmux previously claimed by pinmux_get() + */ +void pinmux_put(struct pinmux *pmx) +{ + if (pmx == NULL) + return; + + mutex_lock(&pmx->mutex); + if (pmx->usecount) + pr_warn("releasing pinmux with active users!\n"); + /* Free the groups and all acquired pins */ + pinmux_free_groups(pmx); + mutex_unlock(&pmx->mutex); + + /* Remove from list */ + mutex_lock(&pinmux_list_mutex); + list_del(&pmx->node); + mutex_unlock(&pinmux_list_mutex); + + kfree(pmx); +} +EXPORT_SYMBOL_GPL(pinmux_put); + +/** + * pinmux_enable() - enable a certain pinmux setting + * @pmx: the pinmux to enable, previously claimed by pinmux_get() + */ +int pinmux_enable(struct pinmux *pmx) +{ + int ret = 0; + + if (pmx == NULL) + return -EINVAL; + mutex_lock(&pmx->mutex); + if (pmx->usecount++ == 0) { + struct pinctrl_dev *pctldev = pmx->pctldev; + const struct pinmux_ops *ops = pctldev->desc->pmxops; + struct pinmux_group *grp; + + list_for_each_entry(grp, &pmx->groups, node) { + ret = ops->enable(pctldev, pmx->func_selector, + grp->group_selector); + if (ret) { + /* + * TODO: call disable() on all groups we called + * enable() on to this point? + */ + pmx->usecount--; + break; + } + } + } + mutex_unlock(&pmx->mutex); + return ret; +} +EXPORT_SYMBOL_GPL(pinmux_enable); + +/** + * pinmux_disable() - disable a certain pinmux setting + * @pmx: the pinmux to disable, previously claimed by pinmux_get() + */ +void pinmux_disable(struct pinmux *pmx) +{ + if (pmx == NULL) + return; + + mutex_lock(&pmx->mutex); + if (--pmx->usecount == 0) { + struct pinctrl_dev *pctldev = pmx->pctldev; + const struct pinmux_ops *ops = pctldev->desc->pmxops; + struct pinmux_group *grp; + + list_for_each_entry(grp, &pmx->groups, node) { + ops->disable(pctldev, pmx->func_selector, + grp->group_selector); + } + } + mutex_unlock(&pmx->mutex); +} +EXPORT_SYMBOL_GPL(pinmux_disable); + +int pinmux_check_ops(const struct pinmux_ops *ops) +{ + /* Check that we implement required operations */ + if (!ops->list_functions || + !ops->get_function_name || + !ops->get_function_groups || + !ops->enable || + !ops->disable) + return -EINVAL; + + return 0; +} + +/* Hog a single map entry and add to the hoglist */ +static int pinmux_hog_map(struct pinctrl_dev *pctldev, + struct pinmux_map const *map) +{ + struct pinmux_hog *hog; + struct pinmux *pmx; + int ret; + + if (map->dev || map->dev_name) { + /* + * TODO: the day we have device tree support, we can + * traverse the device tree and hog to specific device nodes + * without any problems, so then we can hog pinmuxes for + * all devices that just want a static pin mux at this point. + */ + dev_err(&pctldev->dev, "map %s wants to hog a non-system " + "pinmux, this is not going to work\n", map->name); + return -EINVAL; + } + + hog = kzalloc(sizeof(struct pinmux_hog), GFP_KERNEL); + if (!hog) + return -ENOMEM; + + pmx = pinmux_get(NULL, map->name); + if (IS_ERR(pmx)) { + kfree(hog); + dev_err(&pctldev->dev, + "could not get the %s pinmux mapping for hogging\n", + map->name); + return PTR_ERR(pmx); + } + + ret = pinmux_enable(pmx); + if (ret) { + pinmux_put(pmx); + kfree(hog); + dev_err(&pctldev->dev, + "could not enable the %s pinmux mapping for hogging\n", + map->name); + return ret; + } + + hog->map = map; + hog->pmx = pmx; + + dev_info(&pctldev->dev, "hogged map %s, function %s\n", map->name, + map->function); + mutex_lock(&pctldev->pinmux_hogs_lock); + list_add(&hog->node, &pctldev->pinmux_hogs); + mutex_unlock(&pctldev->pinmux_hogs_lock); + + return 0; +} + +/** + * pinmux_hog_maps() - hog specific map entries on controller device + * @pctldev: the pin control device to hog entries on + * + * When the pin controllers are registered, there may be some specific pinmux + * map entries that need to be hogged, i.e. get+enabled until the system shuts + * down. + */ +int pinmux_hog_maps(struct pinctrl_dev *pctldev) +{ + struct device *dev = &pctldev->dev; + const char *devname = dev_name(dev); + int ret; + int i; + + INIT_LIST_HEAD(&pctldev->pinmux_hogs); + mutex_init(&pctldev->pinmux_hogs_lock); + + for (i = 0; i < pinmux_maps_num; i++) { + struct pinmux_map const *map = &pinmux_maps[i]; + + if (((map->ctrl_dev == dev) || + !strcmp(map->ctrl_dev_name, devname)) && + map->hog_on_boot) { + /* OK time to hog! */ + ret = pinmux_hog_map(pctldev, map); + if (ret) + return ret; + } + } + return 0; +} + +/** + * pinmux_hog_maps() - unhog specific map entries on controller device + * @pctldev: the pin control device to unhog entries on + */ +void pinmux_unhog_maps(struct pinctrl_dev *pctldev) +{ + struct list_head *node, *tmp; + + mutex_lock(&pctldev->pinmux_hogs_lock); + list_for_each_safe(node, tmp, &pctldev->pinmux_hogs) { + struct pinmux_hog *hog = + list_entry(node, struct pinmux_hog, node); + pinmux_disable(hog->pmx); + pinmux_put(hog->pmx); + list_del(node); + kfree(hog); + } + mutex_unlock(&pctldev->pinmux_hogs_lock); +} + +#ifdef CONFIG_DEBUG_FS + +/* Called from pincontrol core */ +static int pinmux_functions_show(struct seq_file *s, void *what) +{ + struct pinctrl_dev *pctldev = s->private; + const struct pinmux_ops *pmxops = pctldev->desc->pmxops; + unsigned func_selector = 0; + + while (pmxops->list_functions(pctldev, func_selector) >= 0) { + const char *func = pmxops->get_function_name(pctldev, + func_selector); + const char * const *groups; + unsigned num_groups; + int ret; + int i; + + ret = pmxops->get_function_groups(pctldev, func_selector, + &groups, &num_groups); + if (ret) + seq_printf(s, "function %s: COULD NOT GET GROUPS\n", + func); + + seq_printf(s, "function: %s, groups = [ ", func); + for (i = 0; i < num_groups; i++) + seq_printf(s, "%s ", groups[i]); + seq_puts(s, "]\n"); + + func_selector++; + + } + + return 0; +} + +static int pinmux_pins_show(struct seq_file *s, void *what) +{ + struct pinctrl_dev *pctldev = s->private; + unsigned pin; + + seq_puts(s, "Pinmux settings per pin\n"); + seq_puts(s, "Format: pin (name): pinmuxfunction\n"); + + /* The highest pin number need to be included in the loop, thus <= */ + for (pin = 0; pin <= pctldev->desc->maxpin; pin++) { + + struct pin_desc *desc; + + desc = pin_desc_get(pctldev, pin); + /* Pin space may be sparse */ + if (desc == NULL) + continue; + + seq_printf(s, "pin %d (%s): %s\n", pin, + desc->name ? desc->name : "unnamed", + desc->mux_function ? desc->mux_function + : "UNCLAIMED"); + } + + return 0; +} + +static int pinmux_hogs_show(struct seq_file *s, void *what) +{ + struct pinctrl_dev *pctldev = s->private; + struct pinmux_hog *hog; + + seq_puts(s, "Pinmux map hogs held by device\n"); + + list_for_each_entry(hog, &pctldev->pinmux_hogs, node) + seq_printf(s, "%s\n", hog->map->name); + + return 0; +} + +static int pinmux_show(struct seq_file *s, void *what) +{ + struct pinmux *pmx; + + seq_puts(s, "Requested pinmuxes and their maps:\n"); + list_for_each_entry(pmx, &pinmux_list, node) { + struct pinctrl_dev *pctldev = pmx->pctldev; + const struct pinmux_ops *pmxops; + const struct pinctrl_ops *pctlops; + struct pinmux_group *grp; + + if (!pctldev) { + seq_puts(s, "NO PIN CONTROLLER DEVICE\n"); + continue; + } + + pmxops = pctldev->desc->pmxops; + pctlops = pctldev->desc->pctlops; + + seq_printf(s, "device: %s function: %s (%u),", + pinctrl_dev_get_name(pmx->pctldev), + pmxops->get_function_name(pctldev, pmx->func_selector), + pmx->func_selector); + + seq_printf(s, " groups: ["); + list_for_each_entry(grp, &pmx->groups, node) { + seq_printf(s, " %s (%u)", + pctlops->get_group_name(pctldev, grp->group_selector), + grp->group_selector); + } + seq_printf(s, " ]"); + + seq_printf(s, " users: %u map-> %s\n", + pmx->usecount, + pmx->dev ? dev_name(pmx->dev) : "(system)"); + } + + return 0; +} + +static int pinmux_maps_show(struct seq_file *s, void *what) +{ + int i; + + seq_puts(s, "Pinmux maps:\n"); + + for (i = 0; i < pinmux_maps_num; i++) { + struct pinmux_map const *map = &pinmux_maps[i]; + + seq_printf(s, "%s:\n", map->name); + if (map->dev || map->dev_name) + seq_printf(s, " device: %s\n", + map->dev ? dev_name(map->dev) : + map->dev_name); + else + seq_printf(s, " SYSTEM MUX\n"); + seq_printf(s, " controlling device %s\n", + map->ctrl_dev ? dev_name(map->ctrl_dev) : + map->ctrl_dev_name); + seq_printf(s, " function: %s\n", map->function); + seq_printf(s, " group: %s\n", map->group ? map->group : + "(default)"); + } + return 0; +} + +static int pinmux_functions_open(struct inode *inode, struct file *file) +{ + return single_open(file, pinmux_functions_show, inode->i_private); +} + +static int pinmux_pins_open(struct inode *inode, struct file *file) +{ + return single_open(file, pinmux_pins_show, inode->i_private); +} + +static int pinmux_hogs_open(struct inode *inode, struct file *file) +{ + return single_open(file, pinmux_hogs_show, inode->i_private); +} + +static int pinmux_open(struct inode *inode, struct file *file) +{ + return single_open(file, pinmux_show, NULL); +} + +static int pinmux_maps_open(struct inode *inode, struct file *file) +{ + return single_open(file, pinmux_maps_show, NULL); +} + +static const struct file_operations pinmux_functions_ops = { + .open = pinmux_functions_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static const struct file_operations pinmux_pins_ops = { + .open = pinmux_pins_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static const struct file_operations pinmux_hogs_ops = { + .open = pinmux_hogs_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static const struct file_operations pinmux_ops = { + .open = pinmux_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static const struct file_operations pinmux_maps_ops = { + .open = pinmux_maps_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +void pinmux_init_device_debugfs(struct dentry *devroot, + struct pinctrl_dev *pctldev) +{ + debugfs_create_file("pinmux-functions", S_IFREG | S_IRUGO, + devroot, pctldev, &pinmux_functions_ops); + debugfs_create_file("pinmux-pins", S_IFREG | S_IRUGO, + devroot, pctldev, &pinmux_pins_ops); + debugfs_create_file("pinmux-hogs", S_IFREG | S_IRUGO, + devroot, pctldev, &pinmux_hogs_ops); +} + +void pinmux_init_debugfs(struct dentry *subsys_root) +{ + debugfs_create_file("pinmuxes", S_IFREG | S_IRUGO, + subsys_root, NULL, &pinmux_ops); + debugfs_create_file("pinmux-maps", S_IFREG | S_IRUGO, + subsys_root, NULL, &pinmux_maps_ops); +} + +#endif /* CONFIG_DEBUG_FS */ diff --git a/drivers/pinctrl/pinmux.h b/drivers/pinctrl/pinmux.h new file mode 100644 index 00000000000..844500b3331 --- /dev/null +++ b/drivers/pinctrl/pinmux.h @@ -0,0 +1,47 @@ +/* + * Internal interface between the core pin control system and the + * pinmux portions + * + * Copyright (C) 2011 ST-Ericsson SA + * Written on behalf of Linaro for ST-Ericsson + * Based on bits of regulator core, gpio core and clk core + * + * Author: Linus Walleij <linus.walleij@linaro.org> + * + * License terms: GNU General Public License (GPL) version 2 + */ +#ifdef CONFIG_PINMUX + +int pinmux_check_ops(const struct pinmux_ops *ops); +void pinmux_init_device_debugfs(struct dentry *devroot, + struct pinctrl_dev *pctldev); +void pinmux_init_debugfs(struct dentry *subsys_root); +int pinmux_hog_maps(struct pinctrl_dev *pctldev); +void pinmux_unhog_maps(struct pinctrl_dev *pctldev); + +#else + +static inline int pinmux_check_ops(const struct pinmux_ops *ops) +{ + return 0; +} + +static inline void pinmux_init_device_debugfs(struct dentry *devroot, + struct pinctrl_dev *pctldev) +{ +} + +static inline void pinmux_init_debugfs(struct dentry *subsys_root) +{ +} + +static inline int pinmux_hog_maps(struct pinctrl_dev *pctldev) +{ + return 0; +} + +static inline void pinmux_unhog_maps(struct pinctrl_dev *pctldev) +{ +} + +#endif |