summaryrefslogtreecommitdiffstats
path: root/drivers
diff options
context:
space:
mode:
Diffstat (limited to 'drivers')
-rw-r--r--drivers/mtd/ubi/build.c6
-rw-r--r--drivers/mtd/ubi/debug.c2
-rw-r--r--drivers/mtd/ubi/debug.h7
-rw-r--r--drivers/mtd/ubi/io.c157
-rw-r--r--drivers/mtd/ubi/scan.c14
-rw-r--r--drivers/mtd/ubi/scan.h2
-rw-r--r--drivers/mtd/ubi/ubi-media.h12
-rw-r--r--drivers/mtd/ubi/ubi.h6
-rw-r--r--drivers/mtd/ubi/wl.c8
9 files changed, 116 insertions, 98 deletions
diff --git a/drivers/mtd/ubi/build.c b/drivers/mtd/ubi/build.c
index 286ed594e5a..e1f7d0a78b9 100644
--- a/drivers/mtd/ubi/build.c
+++ b/drivers/mtd/ubi/build.c
@@ -657,6 +657,11 @@ static int io_init(struct ubi_device *ubi)
if (ubi->mtd->block_isbad && ubi->mtd->block_markbad)
ubi->bad_allowed = 1;
+ if (ubi->mtd->type == MTD_NORFLASH) {
+ ubi_assert(ubi->mtd->writesize == 1);
+ ubi->nor_flash = 1;
+ }
+
ubi->min_io_size = ubi->mtd->writesize;
ubi->hdrs_min_io_size = ubi->mtd->writesize >> ubi->mtd->subpage_sft;
@@ -996,6 +1001,7 @@ int ubi_attach_mtd_dev(struct mtd_info *mtd, int ubi_num, int vid_hdr_offset)
ubi_msg("number of PEBs reserved for bad PEB handling: %d",
ubi->beb_rsvd_pebs);
ubi_msg("max/mean erase counter: %d/%d", ubi->max_ec, ubi->mean_ec);
+ ubi_msg("image sequence number: %d", ubi->image_seq);
/*
* The below lock makes sure we do not race with 'ubi_thread()' which
diff --git a/drivers/mtd/ubi/debug.c b/drivers/mtd/ubi/debug.c
index c0ed60e8ade..54b0186915f 100644
--- a/drivers/mtd/ubi/debug.c
+++ b/drivers/mtd/ubi/debug.c
@@ -44,6 +44,8 @@ void ubi_dbg_dump_ec_hdr(const struct ubi_ec_hdr *ec_hdr)
be32_to_cpu(ec_hdr->vid_hdr_offset));
printk(KERN_DEBUG "\tdata_offset %d\n",
be32_to_cpu(ec_hdr->data_offset));
+ printk(KERN_DEBUG "\timage_seq %d\n",
+ be32_to_cpu(ec_hdr->image_seq));
printk(KERN_DEBUG "\thdr_crc %#08x\n",
be32_to_cpu(ec_hdr->hdr_crc));
printk(KERN_DEBUG "erase counter header hexdump:\n");
diff --git a/drivers/mtd/ubi/debug.h b/drivers/mtd/ubi/debug.h
index 13777e5beac..a4da7a09b94 100644
--- a/drivers/mtd/ubi/debug.h
+++ b/drivers/mtd/ubi/debug.h
@@ -93,6 +93,12 @@ void ubi_dbg_dump_mkvol_req(const struct ubi_mkvol_req *req);
#define UBI_IO_DEBUG 0
#endif
+#ifdef CONFIG_MTD_UBI_DEBUG_PARANOID
+int ubi_dbg_check_all_ff(struct ubi_device *ubi, int pnum, int offset, int len);
+#else
+#define ubi_dbg_check_all_ff(ubi, pnum, offset, len) 0
+#endif
+
#ifdef CONFIG_MTD_UBI_DEBUG_DISABLE_BGT
#define DBG_DISABLE_BGT 1
#else
@@ -167,6 +173,7 @@ static inline int ubi_dbg_is_erase_failure(void)
#define ubi_dbg_is_bitflip() 0
#define ubi_dbg_is_write_failure() 0
#define ubi_dbg_is_erase_failure() 0
+#define ubi_dbg_check_all_ff(ubi, pnum, offset, len) 0
#endif /* !CONFIG_MTD_UBI_DEBUG */
#endif /* !__UBI_DEBUG_H__ */
diff --git a/drivers/mtd/ubi/io.c b/drivers/mtd/ubi/io.c
index effaff28bab..4cb69925d8d 100644
--- a/drivers/mtd/ubi/io.c
+++ b/drivers/mtd/ubi/io.c
@@ -98,17 +98,12 @@ static int paranoid_check_ec_hdr(const struct ubi_device *ubi, int pnum,
static int paranoid_check_peb_vid_hdr(const struct ubi_device *ubi, int pnum);
static int paranoid_check_vid_hdr(const struct ubi_device *ubi, int pnum,
const struct ubi_vid_hdr *vid_hdr);
-static int paranoid_check_all_ff(struct ubi_device *ubi, int pnum, int offset,
- int len);
-static int paranoid_check_empty(struct ubi_device *ubi, int pnum);
#else
#define paranoid_check_not_bad(ubi, pnum) 0
#define paranoid_check_peb_ec_hdr(ubi, pnum) 0
#define paranoid_check_ec_hdr(ubi, pnum, ec_hdr) 0
#define paranoid_check_peb_vid_hdr(ubi, pnum) 0
#define paranoid_check_vid_hdr(ubi, pnum, vid_hdr) 0
-#define paranoid_check_all_ff(ubi, pnum, offset, len) 0
-#define paranoid_check_empty(ubi, pnum) 0
#endif
/**
@@ -244,7 +239,7 @@ int ubi_io_write(struct ubi_device *ubi, const void *buf, int pnum, int offset,
return err > 0 ? -EINVAL : err;
/* The area we are writing to has to contain all 0xFF bytes */
- err = paranoid_check_all_ff(ubi, pnum, offset, len);
+ err = ubi_dbg_check_all_ff(ubi, pnum, offset, len);
if (err)
return err > 0 ? -EINVAL : err;
@@ -271,8 +266,8 @@ int ubi_io_write(struct ubi_device *ubi, const void *buf, int pnum, int offset,
addr = (loff_t)pnum * ubi->peb_size + offset;
err = ubi->mtd->write(ubi->mtd, addr, len, &written, buf);
if (err) {
- ubi_err("error %d while writing %d bytes to PEB %d:%d, written"
- " %zd bytes", err, len, pnum, offset, written);
+ ubi_err("error %d while writing %d bytes to PEB %d:%d, written "
+ "%zd bytes", err, len, pnum, offset, written);
ubi_dbg_dump_stack();
} else
ubi_assert(written == len);
@@ -350,7 +345,7 @@ retry:
return -EIO;
}
- err = paranoid_check_all_ff(ubi, pnum, 0, ubi->peb_size);
+ err = ubi_dbg_check_all_ff(ubi, pnum, 0, ubi->peb_size);
if (err)
return err > 0 ? -EINVAL : err;
@@ -459,6 +454,54 @@ out:
}
/**
+ * nor_erase_prepare - prepare a NOR flash PEB for erasure.
+ * @ubi: UBI device description object
+ * @pnum: physical eraseblock number to prepare
+ *
+ * NOR flash, or at least some of them, have peculiar embedded PEB erasure
+ * algorithm: the PEB is first filled with zeroes, then it is erased. And
+ * filling with zeroes starts from the end of the PEB. This was observed with
+ * Spansion S29GL512N NOR flash.
+ *
+ * This means that in case of a power cut we may end up with intact data at the
+ * beginning of the PEB, and all zeroes at the end of PEB. In other words, the
+ * EC and VID headers are OK, but a large chunk of data at the end of PEB is
+ * zeroed. This makes UBI mistakenly treat this PEB as used and associate it
+ * with an LEB, which leads to subsequent failures (e.g., UBIFS fails).
+ *
+ * This function is called before erasing NOR PEBs and it zeroes out EC and VID
+ * magic numbers in order to invalidate them and prevent the failures. Returns
+ * zero in case of success and a negative error code in case of failure.
+ */
+static int nor_erase_prepare(struct ubi_device *ubi, int pnum)
+{
+ int err;
+ size_t written;
+ loff_t addr;
+ uint32_t data = 0;
+
+ addr = (loff_t)pnum * ubi->peb_size;
+ err = ubi->mtd->write(ubi->mtd, addr, 4, &written, (void *)&data);
+ if (err) {
+ ubi_err("error %d while writing 4 bytes to PEB %d:%d, written "
+ "%zd bytes", err, pnum, 0, written);
+ ubi_dbg_dump_stack();
+ return err;
+ }
+
+ addr += ubi->vid_hdr_aloffset;
+ err = ubi->mtd->write(ubi->mtd, addr, 4, &written, (void *)&data);
+ if (err) {
+ ubi_err("error %d while writing 4 bytes to PEB %d:%d, written "
+ "%zd bytes", err, pnum, ubi->vid_hdr_aloffset, written);
+ ubi_dbg_dump_stack();
+ return err;
+ }
+
+ return 0;
+}
+
+/**
* ubi_io_sync_erase - synchronously erase a physical eraseblock.
* @ubi: UBI device description object
* @pnum: physical eraseblock number to erase
@@ -489,6 +532,12 @@ int ubi_io_sync_erase(struct ubi_device *ubi, int pnum, int torture)
return -EROFS;
}
+ if (ubi->nor_flash) {
+ err = nor_erase_prepare(ubi, pnum);
+ if (err)
+ return err;
+ }
+
if (torture) {
ret = torture_peb(ubi, pnum);
if (ret < 0)
@@ -672,11 +721,6 @@ int ubi_io_read_ec_hdr(struct ubi_device *ubi, int pnum,
if (read_err != -EBADMSG &&
check_pattern(ec_hdr, 0xFF, UBI_EC_HDR_SIZE)) {
/* The physical eraseblock is supposedly empty */
- err = paranoid_check_all_ff(ubi, pnum, 0,
- ubi->peb_size);
- if (err)
- return err > 0 ? UBI_IO_BAD_EC_HDR : err;
-
if (verbose)
ubi_warn("no EC header found at PEB %d, "
"only 0xFF bytes", pnum);
@@ -752,6 +796,7 @@ int ubi_io_write_ec_hdr(struct ubi_device *ubi, int pnum,
ec_hdr->version = UBI_VERSION;
ec_hdr->vid_hdr_offset = cpu_to_be32(ubi->vid_hdr_offset);
ec_hdr->data_offset = cpu_to_be32(ubi->leb_start);
+ ec_hdr->image_seq = cpu_to_be32(ubi->image_seq);
crc = crc32(UBI_CRC32_INIT, ec_hdr, UBI_EC_HDR_SIZE_CRC);
ec_hdr->hdr_crc = cpu_to_be32(crc);
@@ -947,15 +992,6 @@ int ubi_io_read_vid_hdr(struct ubi_device *ubi, int pnum,
if (read_err != -EBADMSG &&
check_pattern(vid_hdr, 0xFF, UBI_VID_HDR_SIZE)) {
/* The physical eraseblock is supposedly free */
-
- /*
- * The below is just a paranoid check, it has to be
- * compiled out if paranoid checks are disabled.
- */
- err = paranoid_check_empty(ubi, pnum);
- if (err)
- return err > 0 ? UBI_IO_BAD_VID_HDR : err;
-
if (verbose)
ubi_warn("no VID header found at PEB %d, "
"only 0xFF bytes", pnum);
@@ -1229,7 +1265,7 @@ exit:
}
/**
- * paranoid_check_all_ff - check that a region of flash is empty.
+ * ubi_dbg_check_all_ff - check that a region of flash is empty.
* @ubi: UBI device description object
* @pnum: the physical eraseblock number to check
* @offset: the starting offset within the physical eraseblock to check
@@ -1239,8 +1275,7 @@ exit:
* @offset of the physical eraseblock @pnum, %1 if not, and a negative error
* code if an error occurred.
*/
-static int paranoid_check_all_ff(struct ubi_device *ubi, int pnum, int offset,
- int len)
+int ubi_dbg_check_all_ff(struct ubi_device *ubi, int pnum, int offset, int len)
{
size_t read;
int err;
@@ -1276,74 +1311,4 @@ error:
return err;
}
-/**
- * paranoid_check_empty - whether a PEB is empty.
- * @ubi: UBI device description object
- * @pnum: the physical eraseblock number to check
- *
- * This function makes sure PEB @pnum is empty, which means it contains only
- * %0xFF data bytes. Returns zero if the PEB is empty, %1 if not, and a
- * negative error code in case of failure.
- *
- * Empty PEBs have the EC header, and do not have the VID header. The caller of
- * this function should have already made sure the PEB does not have the VID
- * header. However, this function re-checks that, because it is possible that
- * the header and data has already been written to the PEB.
- *
- * Let's consider a possible scenario. Suppose there are 2 tasks - A and B.
- * Task A is in 'wear_leveling_worker()'. It is reading VID header of PEB X to
- * find which LEB it corresponds to. PEB X is currently unmapped, and has no
- * VID header. Task B is trying to write to PEB X.
- *
- * Task A: in 'ubi_io_read_vid_hdr()': reads the VID header from PEB X. The
- * read data contain all 0xFF bytes;
- * Task B: writes VID header and some data to PEB X;
- * Task A: assumes PEB X is empty, calls 'paranoid_check_empty()'. And if we
- * do not re-read the VID header, and do not cancel the checking if it
- * is there, we fail.
- */
-static int paranoid_check_empty(struct ubi_device *ubi, int pnum)
-{
- int err, offs = ubi->vid_hdr_aloffset, len = ubi->vid_hdr_alsize;
- size_t read;
- uint32_t magic;
- const struct ubi_vid_hdr *vid_hdr;
-
- mutex_lock(&ubi->dbg_buf_mutex);
- err = ubi->mtd->read(ubi->mtd, offs, len, &read, ubi->dbg_peb_buf);
- if (err && err != -EUCLEAN) {
- ubi_err("error %d while reading %d bytes from PEB %d:%d, "
- "read %zd bytes", err, len, pnum, offs, read);
- goto error;
- }
-
- vid_hdr = ubi->dbg_peb_buf;
- magic = be32_to_cpu(vid_hdr->magic);
- if (magic == UBI_VID_HDR_MAGIC)
- /* The PEB contains VID header, so it is not empty */
- goto out;
-
- err = check_pattern(ubi->dbg_peb_buf, 0xFF, len);
- if (err == 0) {
- ubi_err("flash region at PEB %d:%d, length %d does not "
- "contain all 0xFF bytes", pnum, offs, len);
- goto fail;
- }
-
-out:
- mutex_unlock(&ubi->dbg_buf_mutex);
- return 0;
-
-fail:
- ubi_err("paranoid check failed for PEB %d", pnum);
- ubi_msg("hex dump of the %d-%d region", offs, offs + len);
- print_hex_dump(KERN_DEBUG, "", DUMP_PREFIX_OFFSET, 32, 1,
- ubi->dbg_peb_buf, len, 1);
- err = 1;
-error:
- ubi_dbg_dump_stack();
- mutex_unlock(&ubi->dbg_buf_mutex);
- return err;
-}
-
#endif /* CONFIG_MTD_UBI_DEBUG_PARANOID */
diff --git a/drivers/mtd/ubi/scan.c b/drivers/mtd/ubi/scan.c
index c3d653ba5ca..f60895ee0ae 100644
--- a/drivers/mtd/ubi/scan.c
+++ b/drivers/mtd/ubi/scan.c
@@ -757,6 +757,8 @@ static int process_eb(struct ubi_device *ubi, struct ubi_scan_info *si,
si->is_empty = 0;
if (!ec_corr) {
+ int image_seq;
+
/* Make sure UBI version is OK */
if (ech->version != UBI_VERSION) {
ubi_err("this UBI version is %d, image version is %d",
@@ -778,6 +780,18 @@ static int process_eb(struct ubi_device *ubi, struct ubi_scan_info *si,
ubi_dbg_dump_ec_hdr(ech);
return -EINVAL;
}
+
+ image_seq = be32_to_cpu(ech->ec);
+ if (!si->image_seq_set) {
+ ubi->image_seq = image_seq;
+ si->image_seq_set = 1;
+ } else if (ubi->image_seq != image_seq) {
+ ubi_err("bad image sequence number %d in PEB %d, "
+ "expected %d", image_seq, pnum, ubi->image_seq);
+ ubi_dbg_dump_ec_hdr(ech);
+ return -EINVAL;
+ }
+
}
/* OK, we've done with the EC header, let's look at the VID header */
diff --git a/drivers/mtd/ubi/scan.h b/drivers/mtd/ubi/scan.h
index 61df208e2f2..1017cf12def 100644
--- a/drivers/mtd/ubi/scan.h
+++ b/drivers/mtd/ubi/scan.h
@@ -102,6 +102,7 @@ struct ubi_scan_volume {
* @mean_ec: mean erase counter value
* @ec_sum: a temporary variable used when calculating @mean_ec
* @ec_count: a temporary variable used when calculating @mean_ec
+ * @image_seq_set: indicates @ubi->image_seq is known
*
* This data structure contains the result of scanning and may be used by other
* UBI sub-systems to build final UBI data structures, further error-recovery
@@ -124,6 +125,7 @@ struct ubi_scan_info {
int mean_ec;
uint64_t ec_sum;
int ec_count;
+ int image_seq_set;
};
struct ubi_device;
diff --git a/drivers/mtd/ubi/ubi-media.h b/drivers/mtd/ubi/ubi-media.h
index 8419fdccc79..503ea9b2730 100644
--- a/drivers/mtd/ubi/ubi-media.h
+++ b/drivers/mtd/ubi/ubi-media.h
@@ -129,6 +129,7 @@ enum {
* @ec: the erase counter
* @vid_hdr_offset: where the VID header starts
* @data_offset: where the user data start
+ * @image_seq: image sequence number
* @padding2: reserved for future, zeroes
* @hdr_crc: erase counter header CRC checksum
*
@@ -144,6 +145,14 @@ enum {
* volume identifier header and user data, relative to the beginning of the
* physical eraseblock. These values have to be the same for all physical
* eraseblocks.
+ *
+ * The @image_seq field is used to validate a UBI image that has been prepared
+ * for a UBI device. The @image_seq value can be any value, but it must be the
+ * same on all eraseblocks. UBI will ensure that all new erase counter headers
+ * also contain this value, and will check the value when scanning at start-up.
+ * One way to make use of @image_seq is to increase its value by one every time
+ * an image is flashed over an existing image, then, if the flashing does not
+ * complete, UBI will detect the error when scanning.
*/
struct ubi_ec_hdr {
__be32 magic;
@@ -152,7 +161,8 @@ struct ubi_ec_hdr {
__be64 ec; /* Warning: the current limit is 31-bit anyway! */
__be32 vid_hdr_offset;
__be32 data_offset;
- __u8 padding2[36];
+ __be32 image_seq;
+ __u8 padding2[32];
__be32 hdr_crc;
} __attribute__ ((packed));
diff --git a/drivers/mtd/ubi/ubi.h b/drivers/mtd/ubi/ubi.h
index 28acd133c99..6a5fe963378 100644
--- a/drivers/mtd/ubi/ubi.h
+++ b/drivers/mtd/ubi/ubi.h
@@ -301,6 +301,7 @@ struct ubi_wl_entry;
* @vol->readers, @vol->writers, @vol->exclusive,
* @vol->ref_count, @vol->mapping and @vol->eba_tbl.
* @ref_count: count of references on the UBI device
+ * @image_seq: image sequence number recorded on EC headers
*
* @rsvd_pebs: count of reserved physical eraseblocks
* @avail_pebs: count of available physical eraseblocks
@@ -372,6 +373,7 @@ struct ubi_wl_entry;
* @vid_hdr_shift: contains @vid_hdr_offset - @vid_hdr_aloffset
* @bad_allowed: whether the MTD device admits of bad physical eraseblocks or
* not
+ * @nor_flash: non-zero if working on top of NOR flash
* @mtd: MTD device descriptor
*
* @peb_buf1: a buffer of PEB size used for different purposes
@@ -390,6 +392,7 @@ struct ubi_device {
struct ubi_volume *volumes[UBI_MAX_VOLUMES+UBI_INT_VOL_COUNT];
spinlock_t volumes_lock;
int ref_count;
+ int image_seq;
int rsvd_pebs;
int avail_pebs;
@@ -452,7 +455,8 @@ struct ubi_device {
int vid_hdr_offset;
int vid_hdr_aloffset;
int vid_hdr_shift;
- int bad_allowed;
+ unsigned int bad_allowed:1;
+ unsigned int nor_flash:1;
struct mtd_info *mtd;
void *peb_buf1;
diff --git a/drivers/mtd/ubi/wl.c b/drivers/mtd/ubi/wl.c
index 2b247230061..600c7229d5c 100644
--- a/drivers/mtd/ubi/wl.c
+++ b/drivers/mtd/ubi/wl.c
@@ -459,6 +459,14 @@ retry:
dbg_wl("PEB %d EC %d", e->pnum, e->ec);
prot_queue_add(ubi, e);
spin_unlock(&ubi->wl_lock);
+
+ err = ubi_dbg_check_all_ff(ubi, e->pnum, ubi->vid_hdr_aloffset,
+ ubi->peb_size - ubi->vid_hdr_aloffset);
+ if (err) {
+ ubi_err("new PEB %d does not contain all 0xFF bytes", e->pnum);
+ return err > 0 ? -EINVAL : err;
+ }
+
return e->pnum;
}