4 files changed, 43 insertions, 16 deletions

diff --git a/drivers/acpi/battery.c b/drivers/acpi/battery.c
index 192c244f619..2e8e790c118 100644
--- a/drivers/acpi/battery.c
+++ b/drivers/acpi/battery.c
@@ -153,6 +153,8 @@ static int acpi_battery_get_property(struct power_supply *psy,
 			val->intval = POWER_SUPPLY_STATUS_CHARGING;
 		else if (battery->state == 0)
 			val->intval = POWER_SUPPLY_STATUS_FULL;
+		else
+			val->intval = POWER_SUPPLY_STATUS_UNKNOWN;
 		break;
 	case POWER_SUPPLY_PROP_PRESENT:
 		val->intval = acpi_battery_present(battery);
diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c
index 390f8f8666d..d6ddb547f2d 100644
--- a/drivers/acpi/ec.c
+++ b/drivers/acpi/ec.c
@@ -890,12 +890,20 @@ int __init acpi_ec_ecdt_probe(void)
 		boot_ec->gpe = ecdt_ptr->gpe;
 		boot_ec->handle = ACPI_ROOT_OBJECT;
 	} else {
+		/* This workaround is needed only on some broken machines,
+		 * which require early EC, but fail to provide ECDT */
+		acpi_handle x;
 		printk(KERN_DEBUG PREFIX "Look up EC in DSDT\n");
 		status = acpi_get_devices(ec_device_ids[0].id, ec_parse_device,
 						boot_ec, NULL);
 		/* Check that acpi_get_devices actually find something */
 		if (ACPI_FAILURE(status) || !boot_ec->handle)
 			goto error;
+		/* We really need to limit this workaround, the only ASUS,
+		 * which needs it, has fake EC._INI method, so use it as flag.
+		 */
+		if (ACPI_FAILURE(acpi_get_handle(boot_ec->handle, "_INI", &x)))
+			goto error;
 	}
 
 	ret = ec_install_handlers(boot_ec);
diff --git a/drivers/acpi/sbs.c b/drivers/acpi/sbs.c
index 90fd09c65f9..73c1ba31429 100644
--- a/drivers/acpi/sbs.c
+++ b/drivers/acpi/sbs.c
@@ -113,6 +113,7 @@ struct acpi_battery {
 	u16 spec;
 	u8 id;
 	u8 present:1;
+	u8 have_sysfs_alarm:1;
 };
 
 #define to_acpi_battery(x) container_of(x, struct acpi_battery, bat);
@@ -808,7 +809,13 @@ static int acpi_battery_add(struct acpi_sbs *sbs, int id)
 	}
 	battery->bat.get_property = acpi_sbs_battery_get_property;
 	result = power_supply_register(&sbs->device->dev, &battery->bat);
-	device_create_file(battery->bat.dev, &alarm_attr);
+	if (result)
+		goto end;
+	result = device_create_file(battery->bat.dev, &alarm_attr);
+	if (result)
+		goto end;
+	battery->have_sysfs_alarm = 1;
+      end:
 	printk(KERN_INFO PREFIX "%s [%s]: Battery Slot [%s] (battery %s)\n",
 	       ACPI_SBS_DEVICE_NAME, acpi_device_bid(sbs->device),
 	       battery->name, sbs->battery->present ? "present" : "absent");
@@ -817,14 +824,16 @@ static int acpi_battery_add(struct acpi_sbs *sbs, int id)
 
 static void acpi_battery_remove(struct acpi_sbs *sbs, int id)
 {
-	if (sbs->battery[id].bat.dev)
-		device_remove_file(sbs->battery[id].bat.dev, &alarm_attr);
-		power_supply_unregister(&sbs->battery[id].bat);
-#ifdef CONFIG_ACPI_PROCFS
-	if (sbs->battery[id].proc_entry) {
-		acpi_sbs_remove_fs(&(sbs->battery[id].proc_entry),
-				   acpi_battery_dir);
+	struct acpi_battery *battery = &sbs->battery[id];
+
+	if (battery->bat.dev) {
+		if (battery->have_sysfs_alarm)
+			device_remove_file(battery->bat.dev, &alarm_attr);
+		power_supply_unregister(&battery->bat);
 	}
+#ifdef CONFIG_ACPI_PROCFS
+	if (battery->proc_entry)
+		acpi_sbs_remove_fs(&battery->proc_entry, acpi_battery_dir);
 #endif
 }
 
diff --git a/drivers/pnp/pnpacpi/rsparser.c b/drivers/pnp/pnpacpi/rsparser.c
index cd0a204d96d..11adab13f2b 100644
--- a/drivers/pnp/pnpacpi/rsparser.c
+++ b/drivers/pnp/pnpacpi/rsparser.c
@@ -75,6 +75,7 @@ static void pnpacpi_parse_allocated_irqresource(struct pnp_resource_table *res,
 {
 	int i = 0;
 	int irq;
+	int p, t;
 
 	if (!valid_IRQ(gsi))
 		return;
@@ -85,15 +86,22 @@ static void pnpacpi_parse_allocated_irqresource(struct pnp_resource_table *res,
 	if (i >= PNP_MAX_IRQ)
 		return;
 
-#ifdef CONFIG_X86
-	if (gsi < 16 && (triggering != ACPI_EDGE_SENSITIVE ||
-				polarity != ACPI_ACTIVE_HIGH)) {
-		pnp_warn("BIOS BUG: legacy PNP IRQ %d should be edge trigger, "
-				"active high", gsi);
-		triggering = ACPI_EDGE_SENSITIVE;
-		polarity = ACPI_ACTIVE_HIGH;
+	/*
+	 * in IO-APIC mode, use overrided attribute. Two reasons:
+	 * 1. BIOS bug in DSDT
+	 * 2. BIOS uses IO-APIC mode Interrupt Source Override
+	 */
+	if (!acpi_get_override_irq(gsi, &t, &p)) {
+		t = t ? ACPI_LEVEL_SENSITIVE : ACPI_EDGE_SENSITIVE;
+		p = p ? ACPI_ACTIVE_LOW : ACPI_ACTIVE_HIGH;
+
+		if (triggering != t || polarity != p) {
+			pnp_warn("IRQ %d override to %s, %s",
+				gsi, t ? "edge":"level", p ? "low":"high");
+			triggering = t;
+			polarity = p;
+		}
 	}
-#endif
 
 	res->irq_resource[i].flags = IORESOURCE_IRQ;	// Also clears _UNSET flag
 	res->irq_resource[i].flags |= irq_flags(triggering, polarity);