diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/power/reset/Kconfig | 8 | ||||
| -rw-r--r-- | drivers/power/reset/Makefile | 1 | ||||
| -rw-r--r-- | drivers/power/reset/at91-poweroff.c | 156 |
3 files changed, 165 insertions, 0 deletions
diff --git a/drivers/power/reset/Kconfig b/drivers/power/reset/Kconfig index 360bac75a3d..1f9d0c53fc1 100644 --- a/drivers/power/reset/Kconfig +++ b/drivers/power/reset/Kconfig @@ -14,6 +14,14 @@ config POWER_RESET_AS3722 help This driver supports turning off board via a ams AS3722 power-off. +config POWER_RESET_AT91_POWEROFF + bool "Atmel AT91 poweroff driver" + depends on MACH_AT91 + default SOC_AT91SAM9 || SOC_SAMA5 + help + This driver supports poweroff for Atmel AT91SAM9 and SAMA5 + SoCs + config POWER_RESET_AT91_RESET bool "Atmel AT91 reset driver" depends on MACH_AT91 diff --git a/drivers/power/reset/Makefile b/drivers/power/reset/Makefile index 1599214b91d..8bf941bac3d 100644 --- a/drivers/power/reset/Makefile +++ b/drivers/power/reset/Makefile @@ -1,4 +1,5 @@ obj-$(CONFIG_POWER_RESET_AS3722) += as3722-poweroff.o +obj-$(CONFIG_POWER_RESET_AT91_POWEROFF) += at91-poweroff.o obj-$(CONFIG_POWER_RESET_AT91_RESET) += at91-reset.o obj-$(CONFIG_POWER_RESET_AXXIA) += axxia-reset.o obj-$(CONFIG_POWER_RESET_GPIO) += gpio-poweroff.o diff --git a/drivers/power/reset/at91-poweroff.c b/drivers/power/reset/at91-poweroff.c new file mode 100644 index 00000000000..40bf42d146f --- /dev/null +++ b/drivers/power/reset/at91-poweroff.c @@ -0,0 +1,156 @@ +/* + * Atmel AT91 SAM9 SoCs reset code + * + * Copyright (C) 2007 Atmel Corporation. + * Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + * Copyright (C) 2014 Free Electrons + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/io.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/printk.h> + +#define AT91_SHDW_CR 0x00 /* Shut Down Control Register */ +#define AT91_SHDW_SHDW BIT(0) /* Shut Down command */ +#define AT91_SHDW_KEY (0xa5 << 24) /* KEY Password */ + +#define AT91_SHDW_MR 0x04 /* Shut Down Mode Register */ +#define AT91_SHDW_WKMODE0 GENMASK(2, 0) /* Wake-up 0 Mode Selection */ +#define AT91_SHDW_CPTWK0_MAX 0xf /* Maximum Counter On Wake Up 0 */ +#define AT91_SHDW_CPTWK0 (AT91_SHDW_CPTWK0_MAX << 4) /* Counter On Wake Up 0 */ +#define AT91_SHDW_CPTWK0_(x) ((x) << 4) +#define AT91_SHDW_RTTWKEN BIT(16) /* Real Time Timer Wake-up Enable */ +#define AT91_SHDW_RTCWKEN BIT(17) /* Real Time Clock Wake-up Enable */ + +#define AT91_SHDW_SR 0x08 /* Shut Down Status Register */ +#define AT91_SHDW_WAKEUP0 BIT(0) /* Wake-up 0 Status */ +#define AT91_SHDW_RTTWK BIT(16) /* Real-time Timer Wake-up */ +#define AT91_SHDW_RTCWK BIT(17) /* Real-time Clock Wake-up [SAM9RL] */ + +enum wakeup_type { + AT91_SHDW_WKMODE0_NONE = 0, + AT91_SHDW_WKMODE0_HIGH = 1, + AT91_SHDW_WKMODE0_LOW = 2, + AT91_SHDW_WKMODE0_ANYLEVEL = 3, +}; + +static const char *shdwc_wakeup_modes[] = { + [AT91_SHDW_WKMODE0_NONE] = "none", + [AT91_SHDW_WKMODE0_HIGH] = "high", + [AT91_SHDW_WKMODE0_LOW] = "low", + [AT91_SHDW_WKMODE0_ANYLEVEL] = "any", +}; + +static void __iomem *at91_shdwc_base; + +static void __init at91_wakeup_status(void) +{ + u32 reg = readl(at91_shdwc_base); + char *reason = "unknown"; + + /* Simple power-on, just bail out */ + if (!reg) + return; + + if (reg & AT91_SHDW_RTTWK) + reason = "RTT"; + else if (reg & AT91_SHDW_RTCWK) + reason = "RTC"; + + pr_info("AT91: Wake-Up source: %s\n", reason); +} + +static void at91_poweroff(void) +{ + writel(AT91_SHDW_KEY | AT91_SHDW_SHDW, at91_shdwc_base + AT91_SHDW_CR); +} + +const enum wakeup_type at91_poweroff_get_wakeup_mode(struct device_node *np) +{ + const char *pm; + int err, i; + + err = of_property_read_string(np, "atmel,wakeup-mode", &pm); + if (err < 0) + return AT91_SHDW_WKMODE0_ANYLEVEL; + + for (i = 0; i < ARRAY_SIZE(shdwc_wakeup_modes); i++) + if (!strcasecmp(pm, shdwc_wakeup_modes[i])) + return i; + + return -ENODEV; +} + +static void at91_poweroff_dt_set_wakeup_mode(struct platform_device *pdev) +{ + struct device_node *np = pdev->dev.of_node; + enum wakeup_type wakeup_mode; + u32 mode = 0, tmp; + + wakeup_mode = at91_poweroff_get_wakeup_mode(np); + if (wakeup_mode < 0) { + dev_warn(&pdev->dev, "shdwc unknown wakeup mode\n"); + return; + } + + if (!of_property_read_u32(np, "atmel,wakeup-counter", &tmp)) { + if (tmp > AT91_SHDW_CPTWK0_MAX) { + dev_warn(&pdev->dev, + "shdwc wakeup counter 0x%x > 0x%x reduce it to 0x%x\n", + tmp, AT91_SHDW_CPTWK0_MAX, AT91_SHDW_CPTWK0_MAX); + tmp = AT91_SHDW_CPTWK0_MAX; + } + mode |= AT91_SHDW_CPTWK0_(tmp); + } + + if (of_property_read_bool(np, "atmel,wakeup-rtc-timer")) + mode |= AT91_SHDW_RTCWKEN; + + if (of_property_read_bool(np, "atmel,wakeup-rtt-timer")) + mode |= AT91_SHDW_RTTWKEN; + + writel(wakeup_mode | mode, at91_shdwc_base + AT91_SHDW_MR); +} + +static int at91_poweroff_probe(struct platform_device *pdev) +{ + struct resource *res; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + at91_shdwc_base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(at91_shdwc_base)) { + dev_err(&pdev->dev, "Could not map reset controller address\n"); + return PTR_ERR(at91_shdwc_base); + } + + at91_wakeup_status(); + + if (pdev->dev.of_node) + at91_poweroff_dt_set_wakeup_mode(pdev); + + pm_power_off = at91_poweroff; + + return 0; +} + +static struct of_device_id at91_poweroff_of_match[] = { + { .compatible = "atmel,at91sam9260-shdwc", }, + { .compatible = "atmel,at91sam9rl-shdwc", }, + { .compatible = "atmel,at91sam9x5-shdwc", }, + { /*sentinel*/ } +}; + +static struct platform_driver at91_poweroff_driver = { + .probe = at91_poweroff_probe, + .driver = { + .name = "at91-poweroff", + .of_match_table = at91_poweroff_of_match, + }, +}; +module_platform_driver(at91_poweroff_driver); |