diff options
Diffstat (limited to 'drivers')
38 files changed, 50 insertions, 46 deletions
diff --git a/drivers/base/Kconfig b/drivers/base/Kconfig index e373671652b..ec36e7772e5 100644 --- a/drivers/base/Kconfig +++ b/drivers/base/Kconfig @@ -49,7 +49,7 @@ config DEVTMPFS_MOUNT with the commandline parameter: devtmpfs.mount=0|1. This option does not affect initramfs based booting, here the devtmpfs filesystem always needs to be mounted manually - after the roots is mounted. + after the rootfs is mounted. With this option enabled, it allows to bring up a system in rescue mode with init=/bin/sh, even when the /dev directory on the rootfs is completely empty. diff --git a/drivers/block/Makefile b/drivers/block/Makefile index 8cc98cd0d4a..816d979c326 100644 --- a/drivers/block/Makefile +++ b/drivers/block/Makefile @@ -31,7 +31,6 @@ obj-$(CONFIG_BLK_DEV_NBD) += nbd.o obj-$(CONFIG_BLK_DEV_CRYPTOLOOP) += cryptoloop.o obj-$(CONFIG_VIRTIO_BLK) += virtio_blk.o -obj-$(CONFIG_VIODASD) += viodasd.o obj-$(CONFIG_BLK_DEV_SX8) += sx8.o obj-$(CONFIG_BLK_DEV_HD) += hd.o diff --git a/drivers/cdrom/Makefile b/drivers/cdrom/Makefile index ecf85fda0fc..8ffde4f8ab9 100644 --- a/drivers/cdrom/Makefile +++ b/drivers/cdrom/Makefile @@ -10,5 +10,4 @@ obj-$(CONFIG_BLK_DEV_SR) += cdrom.o obj-$(CONFIG_PARIDE_PCD) += cdrom.o obj-$(CONFIG_CDROM_PKTCDVD) += cdrom.o -obj-$(CONFIG_VIOCD) += viocd.o cdrom.o obj-$(CONFIG_GDROM) += gdrom.o cdrom.o diff --git a/drivers/char/Makefile b/drivers/char/Makefile index 7ff1d0d208a..290fe5b7fd3 100644 --- a/drivers/char/Makefile +++ b/drivers/char/Makefile @@ -13,7 +13,6 @@ obj-$(CONFIG_MSM_SMD_PKT) += msm_smd_pkt.o obj-$(CONFIG_MSPEC) += mspec.o obj-$(CONFIG_MMTIMER) += mmtimer.o obj-$(CONFIG_UV_MMTIMER) += uv_mmtimer.o -obj-$(CONFIG_VIOTAPE) += viotape.o obj-$(CONFIG_IBM_BSR) += bsr.o obj-$(CONFIG_SGI_MBCS) += mbcs.o obj-$(CONFIG_BFIN_OTP) += bfin-otp.o diff --git a/drivers/char/msm_smd_pkt.c b/drivers/char/msm_smd_pkt.c index 8eca55deb3a..ba82a06d968 100644 --- a/drivers/char/msm_smd_pkt.c +++ b/drivers/char/msm_smd_pkt.c @@ -182,7 +182,7 @@ static int smd_pkt_write(struct file *file, const char __user *buf, if (count > MAX_BUF_SIZE) return -EINVAL; - DBG("writting %d bytes\n", count); + DBG("writing %d bytes\n", count); smd_pkt_devp = file->private_data; if (!smd_pkt_devp || !smd_pkt_devp->ch) diff --git a/drivers/devfreq/exynos/exynos4_bus.c b/drivers/devfreq/exynos/exynos4_bus.c index cede6f71cd6..bbbfe6853b1 100644 --- a/drivers/devfreq/exynos/exynos4_bus.c +++ b/drivers/devfreq/exynos/exynos4_bus.c @@ -116,7 +116,7 @@ static struct bus_opp_table exynos4210_busclk_table[] = { }; /* - * MIF is the main control knob clock for exynox4x12 MIF/INT + * MIF is the main control knob clock for Exynos4x12 MIF/INT * clock and voltage of both mif/int are controlled. */ static struct bus_opp_table exynos4x12_mifclk_table[] = { diff --git a/drivers/devfreq/exynos/exynos5_bus.c b/drivers/devfreq/exynos/exynos5_bus.c index a60da3c1c48..6eef1f7397c 100644 --- a/drivers/devfreq/exynos/exynos5_bus.c +++ b/drivers/devfreq/exynos/exynos5_bus.c @@ -152,7 +152,7 @@ static int exynos5_busfreq_int_target(struct device *dev, unsigned long *_freq, if (old_freq == freq) return 0; - dev_dbg(dev, "targetting %lukHz %luuV\n", freq, volt); + dev_dbg(dev, "targeting %lukHz %luuV\n", freq, volt); mutex_lock(&data->lock); diff --git a/drivers/gpu/drm/exynos/exynos_drm_crtc.c b/drivers/gpu/drm/exynos/exynos_drm_crtc.c index ebc01503d50..6f3400f3978 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_crtc.c +++ b/drivers/gpu/drm/exynos/exynos_drm_crtc.c @@ -36,9 +36,9 @@ enum exynos_crtc_mode { * @pipe: a crtc index created at load() with a new crtc object creation * and the crtc object would be set to private->crtc array * to get a crtc object corresponding to this pipe from private->crtc - * array when irq interrupt occured. the reason of using this pipe is that + * array when irq interrupt occurred. the reason of using this pipe is that * drm framework doesn't support multiple irq yet. - * we can refer to the crtc to current hardware interrupt occured through + * we can refer to the crtc to current hardware interrupt occurred through * this pipe value. * @dpms: store the crtc dpms value * @mode: store the crtc mode value diff --git a/drivers/gpu/drm/exynos/exynos_drm_fimc.c b/drivers/gpu/drm/exynos/exynos_drm_fimc.c index 8adfc8f1e08..30d76b2ff9c 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_fimc.c +++ b/drivers/gpu/drm/exynos/exynos_drm_fimc.c @@ -345,7 +345,7 @@ static bool fimc_check_ovf(struct fimc_context *ctx) fimc_write(cfg, EXYNOS_CIWDOFST); - dev_err(ippdrv->dev, "occured overflow at %d, status 0x%x.\n", + dev_err(ippdrv->dev, "occurred overflow at %d, status 0x%x.\n", ctx->id, status); return true; } diff --git a/drivers/gpu/drm/exynos/exynos_drm_g2d.c b/drivers/gpu/drm/exynos/exynos_drm_g2d.c index 7bccedca487..380aec28840 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_g2d.c +++ b/drivers/gpu/drm/exynos/exynos_drm_g2d.c @@ -1126,7 +1126,7 @@ int exynos_g2d_set_cmdlist_ioctl(struct drm_device *drm_dev, void *data, * G2D interrupt event once current command list execution is * finished. * Otherwise only ACF bit should be set to INTEN register so - * that one interrupt is occured after all command lists + * that one interrupt is occurred after all command lists * have been completed. */ if (node->event) { diff --git a/drivers/gpu/drm/exynos/exynos_drm_gem.c b/drivers/gpu/drm/exynos/exynos_drm_gem.c index 1ade191d84f..be59d50d8b1 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_gem.c +++ b/drivers/gpu/drm/exynos/exynos_drm_gem.c @@ -652,7 +652,7 @@ int exynos_drm_gem_dumb_create(struct drm_file *file_priv, int ret; /* - * alocate memory to be used for framebuffer. + * allocate memory to be used for framebuffer. * - this callback would be called by user application * with DRM_IOCTL_MODE_CREATE_DUMB command. */ diff --git a/drivers/gpu/drm/exynos/exynos_drm_gem.h b/drivers/gpu/drm/exynos/exynos_drm_gem.h index 702ec3abe85..b8c818ba2ff 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_gem.h +++ b/drivers/gpu/drm/exynos/exynos_drm_gem.h @@ -60,7 +60,7 @@ struct exynos_drm_gem_buf { * @vma: a pointer to vm_area. * @flags: indicate memory type to allocated buffer and cache attruibute. * - * P.S. this object would be transfered to user as kms_bo.handle so + * P.S. this object would be transferred to user as kms_bo.handle so * user can access the buffer through kms_bo.handle. */ struct exynos_drm_gem_obj { diff --git a/drivers/gpu/drm/exynos/exynos_drm_gsc.c b/drivers/gpu/drm/exynos/exynos_drm_gsc.c index cd6aebd53bd..fa75059a610 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_gsc.c +++ b/drivers/gpu/drm/exynos/exynos_drm_gsc.c @@ -1301,13 +1301,13 @@ static irqreturn_t gsc_irq_handler(int irq, void *dev_id) status = gsc_read(GSC_IRQ); if (status & GSC_IRQ_STATUS_OR_IRQ) { - dev_err(ippdrv->dev, "occured overflow at %d, status 0x%x.\n", + dev_err(ippdrv->dev, "occurred overflow at %d, status 0x%x.\n", ctx->id, status); return IRQ_NONE; } if (status & GSC_IRQ_STATUS_OR_FRM_DONE) { - dev_dbg(ippdrv->dev, "occured frame done at %d, status 0x%x.\n", + dev_dbg(ippdrv->dev, "occurred frame done at %d, status 0x%x.\n", ctx->id, status); buf_id[EXYNOS_DRM_OPS_SRC] = gsc_get_src_buf_index(ctx); diff --git a/drivers/gpu/drm/exynos/exynos_drm_ipp.c b/drivers/gpu/drm/exynos/exynos_drm_ipp.c index 824e0705c8d..d519a4e5fe4 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_ipp.c +++ b/drivers/gpu/drm/exynos/exynos_drm_ipp.c @@ -335,7 +335,7 @@ int exynos_drm_ipp_get_property(struct drm_device *drm_dev, void *data, } else { /* * Getting ippdrv capability by ipp_id. - * some deivce not supported wb, output interface. + * some device not supported wb, output interface. * so, user application detect correct ipp driver * using this ioctl. */ diff --git a/drivers/gpu/drm/exynos/exynos_drm_ipp.h b/drivers/gpu/drm/exynos/exynos_drm_ipp.h index 4cadbea7dbd..ab1634befc0 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_ipp.h +++ b/drivers/gpu/drm/exynos/exynos_drm_ipp.h @@ -48,7 +48,7 @@ struct drm_exynos_ipp_cmd_work { /* * A structure of command node. * - * @priv: IPP private infomation. + * @priv: IPP private information. * @list: list head to command queue information. * @event_list: list head of event. * @mem_list: list head to source,destination memory queue information. @@ -92,7 +92,7 @@ struct drm_exynos_ipp_buf_info { }; /* - * A structure of wb setting infomation. + * A structure of wb setting information. * * @enable: enable flag for wb. * @refresh: HZ of the refresh rate. diff --git a/drivers/gpu/drm/qxl/Kconfig b/drivers/gpu/drm/qxl/Kconfig index 66ac0ff95f5..38c2bb72e45 100644 --- a/drivers/gpu/drm/qxl/Kconfig +++ b/drivers/gpu/drm/qxl/Kconfig @@ -5,9 +5,11 @@ config DRM_QXL select FB_SYS_COPYAREA select FB_SYS_IMAGEBLIT select FB_DEFERRED_IO - select DRM_KMS_HELPER + select DRM_KMS_HELPER select DRM_KMS_FB_HELPER - select DRM_TTM + select DRM_TTM select CRC32 help - QXL virtual GPU for Spice virtualization desktop integration. Do not enable this driver unless your distro ships a corresponding X.org QXL driver that can handle kernel modesetting. + QXL virtual GPU for Spice virtualization desktop integration. + Do not enable this driver unless your distro ships a corresponding + X.org QXL driver that can handle kernel modesetting. diff --git a/drivers/gpu/drm/radeon/mkregtable.c b/drivers/gpu/drm/radeon/mkregtable.c index af85299f212..4a85bb644e2 100644 --- a/drivers/gpu/drm/radeon/mkregtable.c +++ b/drivers/gpu/drm/radeon/mkregtable.c @@ -655,7 +655,7 @@ static int parser_auth(struct table *t, const char *filename) /* first line will contain the last register * and gpu name */ - sscanf(buf, "%s %s", gpu_name, last_reg_s); + sscanf(buf, "%9s %9s", gpu_name, last_reg_s); t->gpu_prefix = gpu_name; last_reg = strtol(last_reg_s, NULL, 16); diff --git a/drivers/i2c/busses/i2c-exynos5.c b/drivers/i2c/busses/i2c-exynos5.c index c1ef228095b..044f85b01d0 100644 --- a/drivers/i2c/busses/i2c-exynos5.c +++ b/drivers/i2c/busses/i2c-exynos5.c @@ -571,7 +571,7 @@ static int exynos5_i2c_xfer(struct i2c_adapter *adap, int i = 0, ret = 0, stop = 0; if (i2c->suspended) { - dev_err(i2c->dev, "HS-I2C is not initialzed.\n"); + dev_err(i2c->dev, "HS-I2C is not initialized.\n"); return -EIO; } diff --git a/drivers/i2c/busses/i2c-stu300.c b/drivers/i2c/busses/i2c-stu300.c index 04a17b9b38b..5b80ef31084 100644 --- a/drivers/i2c/busses/i2c-stu300.c +++ b/drivers/i2c/busses/i2c-stu300.c @@ -801,7 +801,7 @@ static int stu300_xfer_msg(struct i2c_adapter *adap, /* Check that the bus is free, or wait until some timeout occurs */ ret = stu300_wait_while_busy(dev); if (ret != 0) { - dev_err(&dev->pdev->dev, "timout waiting for transfer " + dev_err(&dev->pdev->dev, "timeout waiting for transfer " "to commence.\n"); goto exit_disable; } diff --git a/drivers/iio/adc/twl6030-gpadc.c b/drivers/iio/adc/twl6030-gpadc.c index 53e1c645cee..53a24ebb92c 100644 --- a/drivers/iio/adc/twl6030-gpadc.c +++ b/drivers/iio/adc/twl6030-gpadc.c @@ -969,7 +969,7 @@ static int twl6030_gpadc_suspend(struct device *pdev) ret = twl_i2c_write_u8(TWL6030_MODULE_ID1, TWL6030_GPADCR, TWL6030_REG_TOGGLE1); if (ret) - dev_err(pdev, "error reseting GPADC (%d)!\n", ret); + dev_err(pdev, "error resetting GPADC (%d)!\n", ret); return 0; }; diff --git a/drivers/isdn/hisax/hfc4s8s_l1.c b/drivers/isdn/hisax/hfc4s8s_l1.c index c49c294fc81..414dbf6da89 100644 --- a/drivers/isdn/hisax/hfc4s8s_l1.c +++ b/drivers/isdn/hisax/hfc4s8s_l1.c @@ -1620,7 +1620,7 @@ hfc4s8s_probe(struct pci_dev *pdev, const struct pci_device_id *ent) #else if (!request_region(hw->iobase, 8, hw->card_name)) { printk(KERN_INFO - "HFC-4S/8S: failed to rquest address space at 0x%04x\n", + "HFC-4S/8S: failed to request address space at 0x%04x\n", hw->iobase); goto out; } diff --git a/drivers/isdn/mISDN/Kconfig b/drivers/isdn/mISDN/Kconfig index 1747a02a019..c0730d5c734 100644 --- a/drivers/isdn/mISDN/Kconfig +++ b/drivers/isdn/mISDN/Kconfig @@ -17,7 +17,7 @@ config MISDN_DSP This module may be used for special applications that require cross connecting of bchannels, conferencing, dtmf decoding, - echo cancelation, tone generation, and Blowfish encryption and + echo cancellation, tone generation, and Blowfish encryption and decryption. It may use hardware features if available. E.g. it is required for PBX4Linux. Go to http://isdn.eversberg.eu diff --git a/drivers/leds/leds-lp5523.c b/drivers/leds/leds-lp5523.c index fd9ab5f6144..3a0bc886a87 100644 --- a/drivers/leds/leds-lp5523.c +++ b/drivers/leds/leds-lp5523.c @@ -35,7 +35,15 @@ #include "leds-lp55xx-common.h" -#define LP5523_PROGRAM_LENGTH 32 +#define LP5523_PROGRAM_LENGTH 32 /* bytes */ +/* Memory is used like this: + 0x00 engine 1 program + 0x10 engine 2 program + 0x20 engine 3 program + 0x30 engine 1 muxing info + 0x40 engine 2 muxing info + 0x50 engine 3 muxing info +*/ #define LP5523_MAX_LEDS 9 /* Registers */ diff --git a/drivers/leds/leds-lp8501.c b/drivers/leds/leds-lp8501.c index f1c704f2243..00f068b0fa6 100644 --- a/drivers/leds/leds-lp8501.c +++ b/drivers/leds/leds-lp8501.c @@ -263,7 +263,7 @@ static void lp8501_firmware_loaded(struct lp55xx_chip *chip) } /* - * Program momery sequence + * Program memory sequence * 1) set engine mode to "LOAD" * 2) write firmware data into program memory */ diff --git a/drivers/media/platform/ti-vpe/vpdma.c b/drivers/media/platform/ti-vpe/vpdma.c index af0a5ffcaa9..fcbe48a09cf 100644 --- a/drivers/media/platform/ti-vpe/vpdma.c +++ b/drivers/media/platform/ti-vpe/vpdma.c @@ -577,8 +577,8 @@ static void dump_dtd(struct vpdma_dtd *dtd) pr_debug("word5: max_width %d, max_height %d\n", dtd_get_max_width(dtd), dtd_get_max_height(dtd)); - pr_debug("word6: client specfic attr0 = 0x%08x\n", dtd->client_attr0); - pr_debug("word7: client specfic attr1 = 0x%08x\n", dtd->client_attr1); + pr_debug("word6: client specific attr0 = 0x%08x\n", dtd->client_attr0); + pr_debug("word7: client specific attr1 = 0x%08x\n", dtd->client_attr1); } /* diff --git a/drivers/misc/fsa9480.c b/drivers/misc/fsa9480.c index a725c79c35f..71d2793b372 100644 --- a/drivers/misc/fsa9480.c +++ b/drivers/misc/fsa9480.c @@ -396,7 +396,7 @@ static int fsa9480_irq_init(struct fsa9480_usbsw *usbsw) IRQF_TRIGGER_FALLING | IRQF_ONESHOT, "fsa9480 micro USB", usbsw); if (ret) { - dev_err(&client->dev, "failed to reqeust IRQ\n"); + dev_err(&client->dev, "failed to request IRQ\n"); return ret; } diff --git a/drivers/mtd/onenand/samsung.h b/drivers/mtd/onenand/samsung.h index c4a80e67e43..9016dc0136a 100644 --- a/drivers/mtd/onenand/samsung.h +++ b/drivers/mtd/onenand/samsung.h @@ -1,6 +1,4 @@ /* - * linux/arch/arm/plat-s3c/include/plat/regs-onenand.h - * * Copyright (C) 2008-2010 Samsung Electronics * Kyungmin Park <kyungmin.park@samsung.com> * diff --git a/drivers/net/wan/lmc/lmc_main.c b/drivers/net/wan/lmc/lmc_main.c index 7ef435bab42..f51204cfe12 100644 --- a/drivers/net/wan/lmc/lmc_main.c +++ b/drivers/net/wan/lmc/lmc_main.c @@ -2126,7 +2126,7 @@ bug_out: spin_unlock_irqrestore(&sc->lmc_lock, flags); - lmc_trace(dev, "lmc_driver_timout out"); + lmc_trace(dev, "lmc_driver_timeout out"); } diff --git a/drivers/net/wireless/libertas/cmdresp.c b/drivers/net/wireless/libertas/cmdresp.c index 178b222b3ce..65f18f1e869 100644 --- a/drivers/net/wireless/libertas/cmdresp.c +++ b/drivers/net/wireless/libertas/cmdresp.c @@ -248,7 +248,7 @@ int lbs_process_event(struct lbs_private *priv, u32 event) /* handle unexpected PS SLEEP event */ if (priv->psstate == PS_STATE_FULL_POWER) { lbs_deb_cmd( - "EVENT: in FULL POWER mode, ignoreing PS_SLEEP\n"); + "EVENT: in FULL POWER mode, ignoring PS_SLEEP\n"); break; } priv->psstate = PS_STATE_PRE_SLEEP; diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig index 1f02003ea08..c8bd092fc94 100644 --- a/drivers/scsi/Kconfig +++ b/drivers/scsi/Kconfig @@ -204,9 +204,9 @@ config SCSI_MULTI_LUN Some devices support more than one LUN (Logical Unit Number) in order to allow access to several media, e.g. CD jukebox, USB card reader, mobile phone in mass storage mode. This option forces the kernel to - probe for all LUNs by default. This setting can be overriden by + probe for all LUNs by default. This setting can be overridden by max_luns boot/module parameter. Note that this option does not affect - devices conforming to SCSI-3 or higher as they can explicitely report + devices conforming to SCSI-3 or higher as they can explicitly report their number of LUNs. It is safe to say Y here unless you have one of those rare devices which reacts in an unexpected way when probed for multiple LUNs. diff --git a/drivers/scsi/qla2xxx/qla_nx2.c b/drivers/scsi/qla2xxx/qla_nx2.c index b45f4d78ee3..f60989d729a 100644 --- a/drivers/scsi/qla2xxx/qla_nx2.c +++ b/drivers/scsi/qla2xxx/qla_nx2.c @@ -2254,7 +2254,7 @@ qla8044_minidump_process_rdmem(struct scsi_qla_host *vha, if (r_addr & 0xf) { ql_dbg(ql_dbg_p3p, vha, 0xb0f1, - "[%s]: Read addr 0x%x not 16 bytes alligned\n", + "[%s]: Read addr 0x%x not 16 bytes aligned\n", __func__, r_addr); return QLA_FUNCTION_FAILED; } diff --git a/drivers/scsi/qla4xxx/ql4_83xx.c b/drivers/scsi/qla4xxx/ql4_83xx.c index 8196c2f7915..919284834ad 100644 --- a/drivers/scsi/qla4xxx/ql4_83xx.c +++ b/drivers/scsi/qla4xxx/ql4_83xx.c @@ -465,7 +465,7 @@ int qla4_83xx_drv_lock(struct scsi_qla_host *ha) } /* Recovery Failed, some other function * has the lock, wait for 2secs and retry */ - ql4_printk(KERN_INFO, ha, "%s: IDC lock Recovery by %d failed, Retrying timout\n", + ql4_printk(KERN_INFO, ha, "%s: IDC lock Recovery by %d failed, Retrying timeout\n", __func__, ha->func_num); timeout = 0; } diff --git a/drivers/staging/usbip/usbip_common.c b/drivers/staging/usbip/usbip_common.c index 4470cd321d6..96552e3a1bf 100644 --- a/drivers/staging/usbip/usbip_common.c +++ b/drivers/staging/usbip/usbip_common.c @@ -367,7 +367,6 @@ int usbip_recv(struct socket *sock, void *buf, int size) msg.msg_namelen = 0; msg.msg_control = NULL; msg.msg_controllen = 0; - msg.msg_namelen = 0; msg.msg_flags = MSG_NOSIGNAL; result = kernel_recvmsg(sock, &msg, &iov, 1, size, MSG_WAITALL); diff --git a/drivers/thermal/rcar_thermal.c b/drivers/thermal/rcar_thermal.c index 88f92e1a994..79a09d02bbc 100644 --- a/drivers/thermal/rcar_thermal.c +++ b/drivers/thermal/rcar_thermal.c @@ -408,7 +408,7 @@ static int rcar_thermal_probe(struct platform_device *pdev) /* enable temperature comparation */ rcar_thermal_common_write(common, ENR, 0x00030303); - idle = 0; /* polling delaye is not needed */ + idle = 0; /* polling delay is not needed */ } for (i = 0;; i++) { diff --git a/drivers/tty/serial/crisv10.c b/drivers/tty/serial/crisv10.c index 477f22f773f..690bdea0a0c 100644 --- a/drivers/tty/serial/crisv10.c +++ b/drivers/tty/serial/crisv10.c @@ -2153,7 +2153,7 @@ static void flush_timeout_function(unsigned long data) fast_timers[info->line].function = NULL; serial_fast_timer_expired++; - TIMERD(DEBUG_LOG(info->line, "flush_timout %i ", info->line)); + TIMERD(DEBUG_LOG(info->line, "flush_timeout %i ", info->line)); TIMERD(DEBUG_LOG(info->line, "num expired: %i\n", serial_fast_timer_expired)); check_flush_timeout(info); } diff --git a/drivers/usb/serial/kobil_sct.c b/drivers/usb/serial/kobil_sct.c index d8d164b82dc..618c1c1f227 100644 --- a/drivers/usb/serial/kobil_sct.c +++ b/drivers/usb/serial/kobil_sct.c @@ -193,7 +193,7 @@ static int kobil_open(struct tty_struct *tty, struct usb_serial_port *port) KOBIL_TIMEOUT ); dev_dbg(dev, "%s - Send get_HW_version URB returns: %i\n", __func__, result); - dev_dbg(dev, "Harware version: %i.%i.%i\n", transfer_buffer[0], + dev_dbg(dev, "Hardware version: %i.%i.%i\n", transfer_buffer[0], transfer_buffer[1], transfer_buffer[2]); /* get firmware version */ diff --git a/drivers/video/udlfb.c b/drivers/video/udlfb.c index 025f14e30ee..77b890e4d29 100644 --- a/drivers/video/udlfb.c +++ b/drivers/video/udlfb.c @@ -1624,7 +1624,7 @@ static int dlfb_usb_probe(struct usb_interface *interface, } if (pixel_limit) { - pr_warn("DL chip limit of %d overriden" + pr_warn("DL chip limit of %d overridden" " by module param to %d\n", dev->sku_pixel_limit, pixel_limit); dev->sku_pixel_limit = pixel_limit; diff --git a/drivers/xen/Kconfig b/drivers/xen/Kconfig index c794ea18214..12ba6db6514 100644 --- a/drivers/xen/Kconfig +++ b/drivers/xen/Kconfig @@ -222,7 +222,7 @@ config XEN_ACPI_PROCESSOR To do that the driver parses the Power Management data and uploads said information to the Xen hypervisor. Then the Xen hypervisor can - select the proper Cx and Pxx states. It also registers itslef as the + select the proper Cx and Pxx states. It also registers itself as the SMM so that other drivers (such as ACPI cpufreq scaling driver) will not load. |