summaryrefslogtreecommitdiffstats
path: root/drivers
diff options
context:
space:
mode:
Diffstat (limited to 'drivers')
-rw-r--r--drivers/block/Kconfig2
-rw-r--r--drivers/clk/clk-bcm2835.c8
-rw-r--r--drivers/clk/clk-highbank.c10
-rw-r--r--drivers/clk/clk-nomadik.c187
-rw-r--r--drivers/clk/clk-prima2.c29
-rw-r--r--drivers/clk/clk-vt8500.c34
-rw-r--r--drivers/clk/mxs/clk-imx23.c15
-rw-r--r--drivers/clk/mxs/clk-imx28.c16
-rw-r--r--drivers/clk/sunxi/clk-sunxi.c11
-rw-r--r--drivers/gpio/gpio-samsung.c8
-rw-r--r--drivers/ide/Kconfig4
-rw-r--r--drivers/input/serio/Kconfig2
-rw-r--r--drivers/media/platform/Kconfig2
-rw-r--r--drivers/video/cyber2000fb.c70
14 files changed, 156 insertions, 242 deletions
diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig
index e07a5fd58ad..e67fa16e193 100644
--- a/drivers/block/Kconfig
+++ b/drivers/block/Kconfig
@@ -505,7 +505,7 @@ config VIRTIO_BLK
config BLK_DEV_HD
bool "Very old hard disk (MFM/RLL/IDE) driver"
depends on HAVE_IDE
- depends on !ARM || ARCH_RPC || ARCH_SHARK || BROKEN
+ depends on !ARM || ARCH_RPC || BROKEN
help
This is a very old hard disk driver that lacks the enhanced
functionality of the newer ones.
diff --git a/drivers/clk/clk-bcm2835.c b/drivers/clk/clk-bcm2835.c
index 5fb4ff53d08..6b950ca8b71 100644
--- a/drivers/clk/clk-bcm2835.c
+++ b/drivers/clk/clk-bcm2835.c
@@ -20,14 +20,8 @@
#include <linux/clk-provider.h>
#include <linux/clkdev.h>
#include <linux/clk/bcm2835.h>
-#include <linux/clk-provider.h>
#include <linux/of.h>
-static const struct of_device_id clk_match[] __initconst = {
- { .compatible = "fixed-clock", .data = of_fixed_clk_setup, },
- { }
-};
-
/*
* These are fixed clocks. They're probably not all root clocks and it may
* be possible to turn them on and off but until this is mapped out better
@@ -63,6 +57,4 @@ void __init bcm2835_init_clocks(void)
ret = clk_register_clkdev(clk, NULL, "20215000.uart");
if (ret)
pr_err("uart1_pclk alias not registered\n");
-
- of_clk_init(clk_match);
}
diff --git a/drivers/clk/clk-highbank.c b/drivers/clk/clk-highbank.c
index 2e08cb00193..2e7e9d9798c 100644
--- a/drivers/clk/clk-highbank.c
+++ b/drivers/clk/clk-highbank.c
@@ -20,8 +20,7 @@
#include <linux/clk-provider.h>
#include <linux/io.h>
#include <linux/of.h>
-
-extern void __iomem *sregs_base;
+#include <linux/of_address.h>
#define HB_PLL_LOCK_500 0x20000000
#define HB_PLL_LOCK 0x10000000
@@ -280,6 +279,7 @@ static __init struct clk *hb_clk_init(struct device_node *node, const struct clk
const char *clk_name = node->name;
const char *parent_name;
struct clk_init_data init;
+ struct device_node *srnp;
int rc;
rc = of_property_read_u32(node, "reg", &reg);
@@ -290,7 +290,11 @@ static __init struct clk *hb_clk_init(struct device_node *node, const struct clk
if (WARN_ON(!hb_clk))
return NULL;
- hb_clk->reg = sregs_base + reg;
+ /* Map system registers */
+ srnp = of_find_compatible_node(NULL, NULL, "calxeda,hb-sregs");
+ hb_clk->reg = of_iomap(srnp, 0);
+ BUG_ON(!hb_clk->reg);
+ hb_clk->reg += reg;
of_property_read_string(node, "clock-output-names", &clk_name);
diff --git a/drivers/clk/clk-nomadik.c b/drivers/clk/clk-nomadik.c
index 4d978a3c88f..6a934a5296b 100644
--- a/drivers/clk/clk-nomadik.c
+++ b/drivers/clk/clk-nomadik.c
@@ -62,6 +62,79 @@ static DEFINE_SPINLOCK(src_lock);
/* Base address of the SRC */
static void __iomem *src_base;
+static int nomadik_clk_reboot_handler(struct notifier_block *this,
+ unsigned long code,
+ void *unused)
+{
+ u32 val;
+
+ /* The main chrystal need to be enabled for reboot to work */
+ val = readl(src_base + SRC_XTALCR);
+ val &= ~SRC_XTALCR_MXTALOVER;
+ val |= SRC_XTALCR_MXTALEN;
+ pr_crit("force-enabling MXTALO\n");
+ writel(val, src_base + SRC_XTALCR);
+ return NOTIFY_OK;
+}
+
+static struct notifier_block nomadik_clk_reboot_notifier = {
+ .notifier_call = nomadik_clk_reboot_handler,
+};
+
+static const struct of_device_id nomadik_src_match[] __initconst = {
+ { .compatible = "stericsson,nomadik-src" },
+ { /* sentinel */ }
+};
+
+static void __init nomadik_src_init(void)
+{
+ struct device_node *np;
+ u32 val;
+
+ np = of_find_matching_node(NULL, nomadik_src_match);
+ if (!np) {
+ pr_crit("no matching node for SRC, aborting clock init\n");
+ return;
+ }
+ src_base = of_iomap(np, 0);
+ if (!src_base) {
+ pr_err("%s: must have src parent node with REGS (%s)\n",
+ __func__, np->name);
+ return;
+ }
+
+ /* Set all timers to use the 2.4 MHz TIMCLK */
+ val = readl(src_base + SRC_CR);
+ val |= SRC_CR_T0_ENSEL;
+ val |= SRC_CR_T1_ENSEL;
+ val |= SRC_CR_T2_ENSEL;
+ val |= SRC_CR_T3_ENSEL;
+ val |= SRC_CR_T4_ENSEL;
+ val |= SRC_CR_T5_ENSEL;
+ val |= SRC_CR_T6_ENSEL;
+ val |= SRC_CR_T7_ENSEL;
+ writel(val, src_base + SRC_CR);
+
+ val = readl(src_base + SRC_XTALCR);
+ pr_info("SXTALO is %s\n",
+ (val & SRC_XTALCR_SXTALDIS) ? "disabled" : "enabled");
+ pr_info("MXTAL is %s\n",
+ (val & SRC_XTALCR_MXTALSTAT) ? "enabled" : "disabled");
+ if (of_property_read_bool(np, "disable-sxtalo")) {
+ /* The machine uses an external oscillator circuit */
+ val |= SRC_XTALCR_SXTALDIS;
+ pr_info("disabling SXTALO\n");
+ }
+ if (of_property_read_bool(np, "disable-mxtalo")) {
+ /* Disable this too: also run by external oscillator */
+ val |= SRC_XTALCR_MXTALOVER;
+ val &= ~SRC_XTALCR_MXTALEN;
+ pr_info("disabling MXTALO\n");
+ }
+ writel(val, src_base + SRC_XTALCR);
+ register_reboot_notifier(&nomadik_clk_reboot_notifier);
+}
+
/**
* struct clk_pll1 - Nomadik PLL1 clock
* @hw: corresponding clock hardware entry
@@ -439,6 +512,9 @@ static void __init of_nomadik_pll_setup(struct device_node *np)
const char *parent_name;
u32 pll_id;
+ if (!src_base)
+ nomadik_src_init();
+
if (of_property_read_u32(np, "pll-id", &pll_id)) {
pr_err("%s: PLL \"%s\" missing pll-id property\n",
__func__, clk_name);
@@ -449,6 +525,8 @@ static void __init of_nomadik_pll_setup(struct device_node *np)
if (!IS_ERR(clk))
of_clk_add_provider(np, of_clk_src_simple_get, clk);
}
+CLK_OF_DECLARE(nomadik_pll_clk,
+ "st,nomadik-pll-clock", of_nomadik_pll_setup);
static void __init of_nomadik_hclk_setup(struct device_node *np)
{
@@ -456,6 +534,9 @@ static void __init of_nomadik_hclk_setup(struct device_node *np)
const char *clk_name = np->name;
const char *parent_name;
+ if (!src_base)
+ nomadik_src_init();
+
parent_name = of_clk_get_parent_name(np, 0);
/*
* The HCLK divides PLL1 with 1 (passthru), 2, 3 or 4.
@@ -468,6 +549,8 @@ static void __init of_nomadik_hclk_setup(struct device_node *np)
if (!IS_ERR(clk))
of_clk_add_provider(np, of_clk_src_simple_get, clk);
}
+CLK_OF_DECLARE(nomadik_hclk_clk,
+ "st,nomadik-hclk-clock", of_nomadik_hclk_setup);
static void __init of_nomadik_src_clk_setup(struct device_node *np)
{
@@ -476,6 +559,9 @@ static void __init of_nomadik_src_clk_setup(struct device_node *np)
const char *parent_name;
u32 clk_id;
+ if (!src_base)
+ nomadik_src_init();
+
if (of_property_read_u32(np, "clock-id", &clk_id)) {
pr_err("%s: SRC clock \"%s\" missing clock-id property\n",
__func__, clk_name);
@@ -486,102 +572,5 @@ static void __init of_nomadik_src_clk_setup(struct device_node *np)
if (!IS_ERR(clk))
of_clk_add_provider(np, of_clk_src_simple_get, clk);
}
-
-static const struct of_device_id nomadik_src_match[] __initconst = {
- { .compatible = "stericsson,nomadik-src" },
- { /* sentinel */ }
-};
-
-static const struct of_device_id nomadik_src_clk_match[] __initconst = {
- {
- .compatible = "fixed-clock",
- .data = of_fixed_clk_setup,
- },
- {
- .compatible = "fixed-factor-clock",
- .data = of_fixed_factor_clk_setup,
- },
- {
- .compatible = "st,nomadik-pll-clock",
- .data = of_nomadik_pll_setup,
- },
- {
- .compatible = "st,nomadik-hclk-clock",
- .data = of_nomadik_hclk_setup,
- },
- {
- .compatible = "st,nomadik-src-clock",
- .data = of_nomadik_src_clk_setup,
- },
- { /* sentinel */ }
-};
-
-static int nomadik_clk_reboot_handler(struct notifier_block *this,
- unsigned long code,
- void *unused)
-{
- u32 val;
-
- /* The main chrystal need to be enabled for reboot to work */
- val = readl(src_base + SRC_XTALCR);
- val &= ~SRC_XTALCR_MXTALOVER;
- val |= SRC_XTALCR_MXTALEN;
- pr_crit("force-enabling MXTALO\n");
- writel(val, src_base + SRC_XTALCR);
- return NOTIFY_OK;
-}
-
-static struct notifier_block nomadik_clk_reboot_notifier = {
- .notifier_call = nomadik_clk_reboot_handler,
-};
-
-void __init nomadik_clk_init(void)
-{
- struct device_node *np;
- u32 val;
-
- np = of_find_matching_node(NULL, nomadik_src_match);
- if (!np) {
- pr_crit("no matching node for SRC, aborting clock init\n");
- return;
- }
- src_base = of_iomap(np, 0);
- if (!src_base) {
- pr_err("%s: must have src parent node with REGS (%s)\n",
- __func__, np->name);
- return;
- }
-
- /* Set all timers to use the 2.4 MHz TIMCLK */
- val = readl(src_base + SRC_CR);
- val |= SRC_CR_T0_ENSEL;
- val |= SRC_CR_T1_ENSEL;
- val |= SRC_CR_T2_ENSEL;
- val |= SRC_CR_T3_ENSEL;
- val |= SRC_CR_T4_ENSEL;
- val |= SRC_CR_T5_ENSEL;
- val |= SRC_CR_T6_ENSEL;
- val |= SRC_CR_T7_ENSEL;
- writel(val, src_base + SRC_CR);
-
- val = readl(src_base + SRC_XTALCR);
- pr_info("SXTALO is %s\n",
- (val & SRC_XTALCR_SXTALDIS) ? "disabled" : "enabled");
- pr_info("MXTAL is %s\n",
- (val & SRC_XTALCR_MXTALSTAT) ? "enabled" : "disabled");
- if (of_property_read_bool(np, "disable-sxtalo")) {
- /* The machine uses an external oscillator circuit */
- val |= SRC_XTALCR_SXTALDIS;
- pr_info("disabling SXTALO\n");
- }
- if (of_property_read_bool(np, "disable-mxtalo")) {
- /* Disable this too: also run by external oscillator */
- val |= SRC_XTALCR_MXTALOVER;
- val &= ~SRC_XTALCR_MXTALEN;
- pr_info("disabling MXTALO\n");
- }
- writel(val, src_base + SRC_XTALCR);
- register_reboot_notifier(&nomadik_clk_reboot_notifier);
-
- of_clk_init(nomadik_src_clk_match);
-}
+CLK_OF_DECLARE(nomadik_src_clk,
+ "st,nomadik-src-clock", of_nomadik_src_clk_setup);
diff --git a/drivers/clk/clk-prima2.c b/drivers/clk/clk-prima2.c
index 5ab95f1ad57..6c15e331613 100644
--- a/drivers/clk/clk-prima2.c
+++ b/drivers/clk/clk-prima2.c
@@ -1015,16 +1015,6 @@ static struct clk_std clk_usb1 = {
},
};
-static struct of_device_id clkc_ids[] = {
- { .compatible = "sirf,prima2-clkc" },
- {},
-};
-
-static struct of_device_id rsc_ids[] = {
- { .compatible = "sirf,prima2-rsc" },
- {},
-};
-
enum prima2_clk_index {
/* 0 1 2 3 4 5 6 7 8 9 */
rtc, osc, pll1, pll2, pll3, mem, sys, security, dsp, gps,
@@ -1082,24 +1072,16 @@ static struct clk_hw *prima2_clk_hw_array[maxclk] __initdata = {
static struct clk *prima2_clks[maxclk];
static struct clk_onecell_data clk_data;
-void __init sirfsoc_of_clk_init(void)
+static void __init sirfsoc_clk_init(struct device_node *np)
{
- struct device_node *np;
+ struct device_node *rscnp;
int i;
- np = of_find_matching_node(NULL, rsc_ids);
- if (!np)
- panic("unable to find compatible rsc node in dtb\n");
-
- sirfsoc_rsc_vbase = of_iomap(np, 0);
+ rscnp = of_find_compatible_node(NULL, NULL, "sirf,prima2-rsc");
+ sirfsoc_rsc_vbase = of_iomap(rscnp, 0);
if (!sirfsoc_rsc_vbase)
panic("unable to map rsc registers\n");
-
- of_node_put(np);
-
- np = of_find_matching_node(NULL, clkc_ids);
- if (!np)
- return;
+ of_node_put(rscnp);
sirfsoc_clk_vbase = of_iomap(np, 0);
if (!sirfsoc_clk_vbase)
@@ -1124,3 +1106,4 @@ void __init sirfsoc_of_clk_init(void)
of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
}
+CLK_OF_DECLARE(sirfsoc_clk, "sirf,prima2-clkc", sirfsoc_clk_init);
diff --git a/drivers/clk/clk-vt8500.c b/drivers/clk/clk-vt8500.c
index 82306f5fb9c..7fd5c5e9e25 100644
--- a/drivers/clk/clk-vt8500.c
+++ b/drivers/clk/clk-vt8500.c
@@ -15,11 +15,14 @@
#include <linux/io.h>
#include <linux/of.h>
+#include <linux/of_address.h>
#include <linux/slab.h>
#include <linux/bitops.h>
#include <linux/clkdev.h>
#include <linux/clk-provider.h>
+#define LEGACY_PMC_BASE 0xD8130000
+
/* All clocks share the same lock as none can be changed concurrently */
static DEFINE_SPINLOCK(_lock);
@@ -53,6 +56,21 @@ struct clk_pll {
static void __iomem *pmc_base;
+static __init void vtwm_set_pmc_base(void)
+{
+ struct device_node *np =
+ of_find_compatible_node(NULL, NULL, "via,vt8500-pmc");
+
+ if (np)
+ pmc_base = of_iomap(np, 0);
+ else
+ pmc_base = ioremap(LEGACY_PMC_BASE, 0x1000);
+ of_node_put(np);
+
+ if (!pmc_base)
+ pr_err("%s:of_iomap(pmc) failed\n", __func__);
+}
+
#define to_clk_device(_hw) container_of(_hw, struct clk_device, hw)
#define VT8500_PMC_BUSY_MASK 0x18
@@ -222,6 +240,9 @@ static __init void vtwm_device_clk_init(struct device_node *node)
int rc;
int clk_init_flags = 0;
+ if (!pmc_base)
+ vtwm_set_pmc_base();
+
dev_clk = kzalloc(sizeof(*dev_clk), GFP_KERNEL);
if (WARN_ON(!dev_clk))
return;
@@ -636,6 +657,9 @@ static __init void vtwm_pll_clk_init(struct device_node *node, int pll_type)
struct clk_init_data init;
int rc;
+ if (!pmc_base)
+ vtwm_set_pmc_base();
+
rc = of_property_read_u32(node, "reg", &reg);
if (WARN_ON(rc))
return;
@@ -694,13 +718,3 @@ static void __init wm8850_pll_init(struct device_node *node)
vtwm_pll_clk_init(node, PLL_TYPE_WM8850);
}
CLK_OF_DECLARE(wm8850_pll, "wm,wm8850-pll-clock", wm8850_pll_init);
-
-void __init vtwm_clk_init(void __iomem *base)
-{
- if (!base)
- return;
-
- pmc_base = base;
-
- of_clk_init(NULL);
-}
diff --git a/drivers/clk/mxs/clk-imx23.c b/drivers/clk/mxs/clk-imx23.c
index c396fe36158..9fc9359f513 100644
--- a/drivers/clk/mxs/clk-imx23.c
+++ b/drivers/clk/mxs/clk-imx23.c
@@ -12,6 +12,7 @@
#include <linux/clk.h>
#include <linux/clk/mxs.h>
#include <linux/clkdev.h>
+#include <linux/clk-provider.h>
#include <linux/err.h>
#include <linux/init.h>
#include <linux/io.h>
@@ -100,16 +101,16 @@ static enum imx23_clk clks_init_on[] __initdata = {
cpu, hbus, xbus, emi, uart,
};
-int __init mx23_clocks_init(void)
+static void __init mx23_clocks_init(struct device_node *np)
{
- struct device_node *np;
+ struct device_node *dcnp;
u32 i;
- np = of_find_compatible_node(NULL, NULL, "fsl,imx23-digctl");
- digctrl = of_iomap(np, 0);
+ dcnp = of_find_compatible_node(NULL, NULL, "fsl,imx23-digctl");
+ digctrl = of_iomap(dcnp, 0);
WARN_ON(!digctrl);
+ of_node_put(dcnp);
- np = of_find_compatible_node(NULL, NULL, "fsl,imx23-clkctrl");
clkctrl = of_iomap(np, 0);
WARN_ON(!clkctrl);
@@ -162,7 +163,7 @@ int __init mx23_clocks_init(void)
if (IS_ERR(clks[i])) {
pr_err("i.MX23 clk %d: register failed with %ld\n",
i, PTR_ERR(clks[i]));
- return PTR_ERR(clks[i]);
+ return;
}
clk_data.clks = clks;
@@ -172,5 +173,5 @@ int __init mx23_clocks_init(void)
for (i = 0; i < ARRAY_SIZE(clks_init_on); i++)
clk_prepare_enable(clks[clks_init_on[i]]);
- return 0;
}
+CLK_OF_DECLARE(imx23_clkctrl, "fsl,imx23-clkctrl", mx23_clocks_init);
diff --git a/drivers/clk/mxs/clk-imx28.c b/drivers/clk/mxs/clk-imx28.c
index 4faf0afc44c..a6c35010e4e 100644
--- a/drivers/clk/mxs/clk-imx28.c
+++ b/drivers/clk/mxs/clk-imx28.c
@@ -12,6 +12,7 @@
#include <linux/clk.h>
#include <linux/clk/mxs.h>
#include <linux/clkdev.h>
+#include <linux/clk-provider.h>
#include <linux/err.h>
#include <linux/init.h>
#include <linux/io.h>
@@ -154,16 +155,16 @@ static enum imx28_clk clks_init_on[] __initdata = {
cpu, hbus, xbus, emi, uart,
};
-int __init mx28_clocks_init(void)
+static void __init mx28_clocks_init(struct device_node *np)
{
- struct device_node *np;
+ struct device_node *dcnp;
u32 i;
- np = of_find_compatible_node(NULL, NULL, "fsl,imx28-digctl");
- digctrl = of_iomap(np, 0);
+ dcnp = of_find_compatible_node(NULL, NULL, "fsl,imx28-digctl");
+ digctrl = of_iomap(dcnp, 0);
WARN_ON(!digctrl);
+ of_node_put(dcnp);
- np = of_find_compatible_node(NULL, NULL, "fsl,imx28-clkctrl");
clkctrl = of_iomap(np, 0);
WARN_ON(!clkctrl);
@@ -239,7 +240,7 @@ int __init mx28_clocks_init(void)
if (IS_ERR(clks[i])) {
pr_err("i.MX28 clk %d: register failed with %ld\n",
i, PTR_ERR(clks[i]));
- return PTR_ERR(clks[i]);
+ return;
}
clk_data.clks = clks;
@@ -250,6 +251,5 @@ int __init mx28_clocks_init(void)
for (i = 0; i < ARRAY_SIZE(clks_init_on); i++)
clk_prepare_enable(clks[clks_init_on[i]]);
-
- return 0;
}
+CLK_OF_DECLARE(imx28_clkctrl, "fsl,imx28-clkctrl", mx28_clocks_init);
diff --git a/drivers/clk/sunxi/clk-sunxi.c b/drivers/clk/sunxi/clk-sunxi.c
index 34ee69f4d50..9bbd0351454 100644
--- a/drivers/clk/sunxi/clk-sunxi.c
+++ b/drivers/clk/sunxi/clk-sunxi.c
@@ -16,7 +16,6 @@
#include <linux/clk-provider.h>
#include <linux/clkdev.h>
-#include <linux/clk/sunxi.h>
#include <linux/of.h>
#include <linux/of_address.h>
@@ -617,11 +616,8 @@ static void __init of_sunxi_table_clock_setup(const struct of_device_id *clk_mat
}
}
-void __init sunxi_init_clocks(void)
+static void __init sunxi_init_clocks(struct device_node *np)
{
- /* Register all the simple and basic clocks on DT */
- of_clk_init(NULL);
-
/* Register factor clocks */
of_sunxi_table_clock_setup(clk_factors_match, sunxi_factors_clk_setup);
@@ -634,3 +630,8 @@ void __init sunxi_init_clocks(void)
/* Register gate clocks */
of_sunxi_table_clock_setup(clk_gates_match, sunxi_gates_clk_setup);
}
+CLK_OF_DECLARE(sun4i_a10_clk_init, "allwinner,sun4i-a10", sunxi_init_clocks);
+CLK_OF_DECLARE(sun5i_a10s_clk_init, "allwinner,sun5i-a10s", sunxi_init_clocks);
+CLK_OF_DECLARE(sun5i_a13_clk_init, "allwinner,sun5i-a13", sunxi_init_clocks);
+CLK_OF_DECLARE(sun6i_a31_clk_init, "allwinner,sun6i-a31", sunxi_init_clocks);
+CLK_OF_DECLARE(sun7i_a20_clk_init, "allwinner,sun7i-a20", sunxi_init_clocks);
diff --git a/drivers/gpio/gpio-samsung.c b/drivers/gpio/gpio-samsung.c
index 358a21c2d81..f6f1c7d244c 100644
--- a/drivers/gpio/gpio-samsung.c
+++ b/drivers/gpio/gpio-samsung.c
@@ -1033,7 +1033,7 @@ static int s3c24xx_gpiolib_fbank_to_irq(struct gpio_chip *chip, unsigned offset)
}
#endif
-#ifdef CONFIG_PLAT_S3C64XX
+#ifdef CONFIG_ARCH_S3C64XX
static int s3c64xx_gpiolib_mbank_to_irq(struct gpio_chip *chip, unsigned pin)
{
return pin < 5 ? IRQ_EINT(23) + pin : -ENXIO;
@@ -1174,7 +1174,7 @@ struct samsung_gpio_chip s3c24xx_gpios[] = {
*/
static struct samsung_gpio_chip s3c64xx_gpios_4bit[] = {
-#ifdef CONFIG_PLAT_S3C64XX
+#ifdef CONFIG_ARCH_S3C64XX
{
.chip = {
.base = S3C64XX_GPA(0),
@@ -1227,7 +1227,7 @@ static struct samsung_gpio_chip s3c64xx_gpios_4bit[] = {
};
static struct samsung_gpio_chip s3c64xx_gpios_4bit2[] = {
-#ifdef CONFIG_PLAT_S3C64XX
+#ifdef CONFIG_ARCH_S3C64XX
{
.base = S3C64XX_GPH_BASE + 0x4,
.chip = {
@@ -1257,7 +1257,7 @@ static struct samsung_gpio_chip s3c64xx_gpios_4bit2[] = {
};
static struct samsung_gpio_chip s3c64xx_gpios_2bit[] = {
-#ifdef CONFIG_PLAT_S3C64XX
+#ifdef CONFIG_ARCH_S3C64XX
{
.base = S3C64XX_GPF_BASE,
.config = &samsung_gpio_cfgs[6],
diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig
index 02906ca99b4..3f7f59cc8b5 100644
--- a/drivers/ide/Kconfig
+++ b/drivers/ide/Kconfig
@@ -197,8 +197,8 @@ comment "IDE chipset support/bugfixes"
config IDE_GENERIC
tristate "generic/default IDE chipset support"
- depends on ALPHA || X86 || IA64 || M32R || MIPS || ARCH_RPC || ARCH_SHARK
- default ARM && (ARCH_RPC || ARCH_SHARK)
+ depends on ALPHA || X86 || IA64 || M32R || MIPS || ARCH_RPC
+ default ARM && ARCH_RPC
help
This is the generic IDE driver. This driver attaches to the
fixed legacy ports (e.g. on PCs 0x1f0/0x170, 0x1e8/0x168 and
diff --git a/drivers/input/serio/Kconfig b/drivers/input/serio/Kconfig
index 33b3e88fe4a..1de1e5f8f79 100644
--- a/drivers/input/serio/Kconfig
+++ b/drivers/input/serio/Kconfig
@@ -21,7 +21,7 @@ if SERIO
config SERIO_I8042
tristate "i8042 PC Keyboard controller" if EXPERT || !X86
default y
- depends on !PARISC && (!ARM || ARCH_SHARK || FOOTBRIDGE_HOST) && \
+ depends on !PARISC && (!ARM || FOOTBRIDGE_HOST) && \
(!SUPERH || SH_CAYMAN) && !M68K && !BLACKFIN && !S390 && \
!ARC
help
diff --git a/drivers/media/platform/Kconfig b/drivers/media/platform/Kconfig
index c7caf94621b..eb70dda8cbf 100644
--- a/drivers/media/platform/Kconfig
+++ b/drivers/media/platform/Kconfig
@@ -112,7 +112,7 @@ config VIDEO_OMAP3_DEBUG
config VIDEO_S3C_CAMIF
tristate "Samsung S3C24XX/S3C64XX SoC Camera Interface driver"
depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API
- depends on (PLAT_S3C64XX || PLAT_S3C24XX) && PM_RUNTIME
+ depends on (ARCH_S3C64XX || PLAT_S3C24XX) && PM_RUNTIME
select VIDEOBUF2_DMA_CONTIG
---help---
This is a v4l2 driver for s3c24xx and s3c64xx SoC series camera
diff --git a/drivers/video/cyber2000fb.c b/drivers/video/cyber2000fb.c
index 57886787ead..1c446bc48b4 100644
--- a/drivers/video/cyber2000fb.c
+++ b/drivers/video/cyber2000fb.c
@@ -1641,67 +1641,6 @@ static void cyberpro_common_resume(struct cfb_info *cfb)
cyber2000fb_set_par(&cfb->fb);
}
-#ifdef CONFIG_ARCH_SHARK
-
-#include <mach/framebuffer.h>
-
-static int cyberpro_vl_probe(void)
-{
- struct cfb_info *cfb;
- int err = -ENOMEM;
-
- if (!request_mem_region(FB_START, FB_SIZE, "CyberPro2010"))
- return err;
-
- cfb = cyberpro_alloc_fb_info(ID_CYBERPRO_2010, "CyberPro2010");
- if (!cfb)
- goto failed_release;
-
- cfb->irq = -1;
- cfb->region = ioremap(FB_START, FB_SIZE);
- if (!cfb->region)
- goto failed_ioremap;
-
- cfb->regs = cfb->region + MMIO_OFFSET;
- cfb->fb.device = NULL;
- cfb->fb.fix.mmio_start = FB_START + MMIO_OFFSET;
- cfb->fb.fix.smem_start = FB_START;
-
- /*
- * Bring up the hardware. This is expected to enable access
- * to the linear memory region, and allow access to the memory
- * mapped registers. Also, mem_ctl1 and mem_ctl2 must be
- * initialised.
- */
- cyber2000fb_writeb(0x18, 0x46e8, cfb);
- cyber2000fb_writeb(0x01, 0x102, cfb);
- cyber2000fb_writeb(0x08, 0x46e8, cfb);
- cyber2000fb_writeb(EXT_BIU_MISC, 0x3ce, cfb);
- cyber2000fb_writeb(EXT_BIU_MISC_LIN_ENABLE, 0x3cf, cfb);
-
- cfb->mclk_mult = 0xdb;
- cfb->mclk_div = 0x54;
-
- err = cyberpro_common_probe(cfb);
- if (err)
- goto failed;
-
- if (int_cfb_info == NULL)
- int_cfb_info = cfb;
-
- return 0;
-
-failed:
- iounmap(cfb->region);
-failed_ioremap:
- cyberpro_free_fb_info(cfb);
-failed_release:
- release_mem_region(FB_START, FB_SIZE);
-
- return err;
-}
-#endif /* CONFIG_ARCH_SHARK */
-
/*
* PCI specific support.
*/
@@ -1948,28 +1887,19 @@ static int __init cyber2000fb_init(void)
cyber2000fb_setup(option);
#endif
-#ifdef CONFIG_ARCH_SHARK
- err = cyberpro_vl_probe();
- if (!err)
- ret = 0;
-#endif
-#ifdef CONFIG_PCI
err = pci_register_driver(&cyberpro_driver);
if (!err)
ret = 0;
-#endif
return ret ? err : 0;
}
module_init(cyber2000fb_init);
-#ifndef CONFIG_ARCH_SHARK
static void __exit cyberpro_exit(void)
{
pci_unregister_driver(&cyberpro_driver);
}
module_exit(cyberpro_exit);
-#endif
MODULE_AUTHOR("Russell King");
MODULE_DESCRIPTION("CyberPro 2000, 2010 and 5000 framebuffer driver");