summaryrefslogtreecommitdiffstats
path: root/drivers
diff options
context:
space:
mode:
Diffstat (limited to 'drivers')
-rw-r--r--drivers/char/agp/parisc-agp.c2
-rw-r--r--drivers/cpufreq/cpufreq.c27
-rw-r--r--drivers/cpufreq/cpufreq_conservative.c6
-rw-r--r--drivers/input/serio/hp_sdc_mlc.c2
-rw-r--r--drivers/mfd/twl4030-irq.c55
-rw-r--r--drivers/parisc/ccio-dma.c1
-rw-r--r--drivers/parisc/dino.c2
-rw-r--r--drivers/parisc/eisa_eeprom.c2
-rw-r--r--drivers/parisc/hppb.c9
-rw-r--r--drivers/parisc/lba_pci.c2
-rw-r--r--drivers/parisc/pdc_stable.c2
-rw-r--r--drivers/video/console/sticore.c9
12 files changed, 73 insertions, 46 deletions
diff --git a/drivers/char/agp/parisc-agp.c b/drivers/char/agp/parisc-agp.c
index f4bb43fb801..e077701ae3d 100644
--- a/drivers/char/agp/parisc-agp.c
+++ b/drivers/char/agp/parisc-agp.c
@@ -225,7 +225,7 @@ static const struct agp_bridge_driver parisc_agp_driver = {
.configure = parisc_agp_configure,
.fetch_size = parisc_agp_fetch_size,
.tlb_flush = parisc_agp_tlbflush,
- .mask_memory = parisc_agp_mask_memory,
+ .mask_memory = parisc_agp_page_mask_memory,
.masks = parisc_agp_masks,
.agp_enable = parisc_agp_enable,
.cache_flush = global_cache_flush,
diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c
index b90eda8b344..fd69086d08d 100644
--- a/drivers/cpufreq/cpufreq.c
+++ b/drivers/cpufreq/cpufreq.c
@@ -858,6 +858,8 @@ static int cpufreq_add_dev(struct sys_device *sys_dev)
/* Check for existing affected CPUs.
* They may not be aware of it due to CPU Hotplug.
+ * cpufreq_cpu_put is called when the device is removed
+ * in __cpufreq_remove_dev()
*/
managed_policy = cpufreq_cpu_get(j);
if (unlikely(managed_policy)) {
@@ -884,7 +886,7 @@ static int cpufreq_add_dev(struct sys_device *sys_dev)
ret = sysfs_create_link(&sys_dev->kobj,
&managed_policy->kobj,
"cpufreq");
- if (!ret)
+ if (ret)
cpufreq_cpu_put(managed_policy);
/*
* Success. We only needed to be added to the mask.
@@ -924,6 +926,8 @@ static int cpufreq_add_dev(struct sys_device *sys_dev)
spin_lock_irqsave(&cpufreq_driver_lock, flags);
for_each_cpu(j, policy->cpus) {
+ if (!cpu_online(j))
+ continue;
per_cpu(cpufreq_cpu_data, j) = policy;
per_cpu(policy_cpu, j) = policy->cpu;
}
@@ -1244,13 +1248,22 @@ EXPORT_SYMBOL(cpufreq_get);
static int cpufreq_suspend(struct sys_device *sysdev, pm_message_t pmsg)
{
- int cpu = sysdev->id;
int ret = 0;
+
+#ifdef __powerpc__
+ int cpu = sysdev->id;
unsigned int cur_freq = 0;
struct cpufreq_policy *cpu_policy;
dprintk("suspending cpu %u\n", cpu);
+ /*
+ * This whole bogosity is here because Powerbooks are made of fail.
+ * No sane platform should need any of the code below to be run.
+ * (it's entirely the wrong thing to do, as driver->get may
+ * reenable interrupts on some architectures).
+ */
+
if (!cpu_online(cpu))
return 0;
@@ -1309,6 +1322,7 @@ static int cpufreq_suspend(struct sys_device *sysdev, pm_message_t pmsg)
out:
cpufreq_cpu_put(cpu_policy);
+#endif /* __powerpc__ */
return ret;
}
@@ -1322,12 +1336,18 @@ out:
*/
static int cpufreq_resume(struct sys_device *sysdev)
{
- int cpu = sysdev->id;
int ret = 0;
+
+#ifdef __powerpc__
+ int cpu = sysdev->id;
struct cpufreq_policy *cpu_policy;
dprintk("resuming cpu %u\n", cpu);
+ /* As with the ->suspend method, all the code below is
+ * only necessary because Powerbooks suck.
+ * See commit 42d4dc3f4e1e for jokes. */
+
if (!cpu_online(cpu))
return 0;
@@ -1391,6 +1411,7 @@ out:
schedule_work(&cpu_policy->update);
fail:
cpufreq_cpu_put(cpu_policy);
+#endif /* __powerpc__ */
return ret;
}
diff --git a/drivers/cpufreq/cpufreq_conservative.c b/drivers/cpufreq/cpufreq_conservative.c
index 57490502b21..bdea7e2f94b 100644
--- a/drivers/cpufreq/cpufreq_conservative.c
+++ b/drivers/cpufreq/cpufreq_conservative.c
@@ -63,6 +63,7 @@ struct cpu_dbs_info_s {
unsigned int down_skip;
unsigned int requested_freq;
int cpu;
+ unsigned int enable:1;
/*
* percpu mutex that serializes governor limit change with
* do_dbs_timer invocation. We do not want do_dbs_timer to run
@@ -141,6 +142,9 @@ dbs_cpufreq_notifier(struct notifier_block *nb, unsigned long val,
struct cpufreq_policy *policy;
+ if (!this_dbs_info->enable)
+ return 0;
+
policy = this_dbs_info->cur_policy;
/*
@@ -497,6 +501,7 @@ static inline void dbs_timer_init(struct cpu_dbs_info_s *dbs_info)
int delay = usecs_to_jiffies(dbs_tuners_ins.sampling_rate);
delay -= jiffies % delay;
+ dbs_info->enable = 1;
INIT_DELAYED_WORK_DEFERRABLE(&dbs_info->work, do_dbs_timer);
queue_delayed_work_on(dbs_info->cpu, kconservative_wq, &dbs_info->work,
delay);
@@ -504,6 +509,7 @@ static inline void dbs_timer_init(struct cpu_dbs_info_s *dbs_info)
static inline void dbs_timer_exit(struct cpu_dbs_info_s *dbs_info)
{
+ dbs_info->enable = 0;
cancel_delayed_work_sync(&dbs_info->work);
}
diff --git a/drivers/input/serio/hp_sdc_mlc.c b/drivers/input/serio/hp_sdc_mlc.c
index b587e2d576a..820e51673b2 100644
--- a/drivers/input/serio/hp_sdc_mlc.c
+++ b/drivers/input/serio/hp_sdc_mlc.c
@@ -296,7 +296,7 @@ static void hp_sdc_mlc_out(hil_mlc *mlc)
priv->tseq[3] = 0;
if (mlc->opacket & HIL_CTRL_APE) {
priv->tseq[3] |= HP_SDC_LPC_APE_IPF;
- down_trylock(&mlc->csem);
+ BUG_ON(down_trylock(&mlc->csem));
}
enqueue:
hp_sdc_enqueue_transaction(&priv->trans);
diff --git a/drivers/mfd/twl4030-irq.c b/drivers/mfd/twl4030-irq.c
index bae61b22501..7d430835655 100644
--- a/drivers/mfd/twl4030-irq.c
+++ b/drivers/mfd/twl4030-irq.c
@@ -180,14 +180,9 @@ static struct completion irq_event;
static int twl4030_irq_thread(void *data)
{
long irq = (long)data;
- struct irq_desc *desc = irq_to_desc(irq);
static unsigned i2c_errors;
static const unsigned max_i2c_errors = 100;
- if (!desc) {
- pr_err("twl4030: Invalid IRQ: %ld\n", irq);
- return -EINVAL;
- }
current->flags |= PF_NOFREEZE;
@@ -240,7 +235,7 @@ static int twl4030_irq_thread(void *data)
}
local_irq_enable();
- desc->chip->unmask(irq);
+ enable_irq(irq);
}
return 0;
@@ -255,25 +250,13 @@ static int twl4030_irq_thread(void *data)
* thread. All we do here is acknowledge and mask the interrupt and wakeup
* the kernel thread.
*/
-static void handle_twl4030_pih(unsigned int irq, struct irq_desc *desc)
+static irqreturn_t handle_twl4030_pih(int irq, void *devid)
{
/* Acknowledge, clear *AND* mask the interrupt... */
- desc->chip->ack(irq);
- complete(&irq_event);
-}
-
-static struct task_struct *start_twl4030_irq_thread(long irq)
-{
- struct task_struct *thread;
-
- init_completion(&irq_event);
- thread = kthread_run(twl4030_irq_thread, (void *)irq, "twl4030-irq");
- if (!thread)
- pr_err("twl4030: could not create irq %ld thread!\n", irq);
-
- return thread;
+ disable_irq_nosync(irq);
+ complete(devid);
+ return IRQ_HANDLED;
}
-
/*----------------------------------------------------------------------*/
/*
@@ -734,18 +717,28 @@ int twl_init_irq(int irq_num, unsigned irq_base, unsigned irq_end)
}
/* install an irq handler to demultiplex the TWL4030 interrupt */
- task = start_twl4030_irq_thread(irq_num);
- if (!task) {
- pr_err("twl4030: irq thread FAIL\n");
- status = -ESRCH;
- goto fail;
- }
- set_irq_data(irq_num, task);
- set_irq_chained_handler(irq_num, handle_twl4030_pih);
- return status;
+ init_completion(&irq_event);
+ status = request_irq(irq_num, handle_twl4030_pih, IRQF_DISABLED,
+ "TWL4030-PIH", &irq_event);
+ if (status < 0) {
+ pr_err("twl4030: could not claim irq%d: %d\n", irq_num, status);
+ goto fail_rqirq;
+ }
+
+ task = kthread_run(twl4030_irq_thread, (void *)irq_num, "twl4030-irq");
+ if (IS_ERR(task)) {
+ pr_err("twl4030: could not create irq %d thread!\n", irq_num);
+ status = PTR_ERR(task);
+ goto fail_kthread;
+ }
+ return status;
+fail_kthread:
+ free_irq(irq_num, &irq_event);
+fail_rqirq:
+ /* clean up twl4030_sih_setup */
fail:
for (i = irq_base; i < irq_end; i++)
set_irq_chip_and_handler(i, NULL, NULL);
diff --git a/drivers/parisc/ccio-dma.c b/drivers/parisc/ccio-dma.c
index 0f0e0b919ef..a45b0c0d574 100644
--- a/drivers/parisc/ccio-dma.c
+++ b/drivers/parisc/ccio-dma.c
@@ -70,7 +70,6 @@
#undef CCIO_COLLECT_STATS
#endif
-#include <linux/proc_fs.h>
#include <asm/runway.h> /* for proc_runway_root */
#ifdef DEBUG_CCIO_INIT
diff --git a/drivers/parisc/dino.c b/drivers/parisc/dino.c
index c590974e981..d69bde6a234 100644
--- a/drivers/parisc/dino.c
+++ b/drivers/parisc/dino.c
@@ -614,7 +614,7 @@ dino_fixup_bus(struct pci_bus *bus)
dev_name(&bus->self->dev), i,
bus->self->resource[i].start,
bus->self->resource[i].end);
- pci_assign_resource(bus->self, i);
+ WARN_ON(pci_assign_resource(bus->self, i));
DBG("DEBUG %s after assign %d [0x%lx,0x%lx]\n",
dev_name(&bus->self->dev), i,
bus->self->resource[i].start,
diff --git a/drivers/parisc/eisa_eeprom.c b/drivers/parisc/eisa_eeprom.c
index 685d94e69d4..8c0b26e9b98 100644
--- a/drivers/parisc/eisa_eeprom.c
+++ b/drivers/parisc/eisa_eeprom.c
@@ -55,7 +55,7 @@ static ssize_t eisa_eeprom_read(struct file * file,
ssize_t ret;
int i;
- if (*ppos >= HPEE_MAX_LENGTH)
+ if (*ppos < 0 || *ppos >= HPEE_MAX_LENGTH)
return 0;
count = *ppos + count < HPEE_MAX_LENGTH ? count : HPEE_MAX_LENGTH - *ppos;
diff --git a/drivers/parisc/hppb.c b/drivers/parisc/hppb.c
index 13856415b43..815db175d42 100644
--- a/drivers/parisc/hppb.c
+++ b/drivers/parisc/hppb.c
@@ -62,7 +62,8 @@ static int hppb_probe(struct parisc_device *dev)
}
card = card->next;
}
- printk(KERN_INFO "Found GeckoBoa at 0x%x\n", dev->hpa.start);
+ printk(KERN_INFO "Found GeckoBoa at 0x%llx\n",
+ (unsigned long long) dev->hpa.start);
card->hpa = dev->hpa.start;
card->mmio_region.name = "HP-PB Bus";
@@ -73,8 +74,10 @@ static int hppb_probe(struct parisc_device *dev)
status = ccio_request_resource(dev, &card->mmio_region);
if(status < 0) {
- printk(KERN_ERR "%s: failed to claim HP-PB bus space (%08x, %08x)\n",
- __FILE__, card->mmio_region.start, card->mmio_region.end);
+ printk(KERN_ERR "%s: failed to claim HP-PB "
+ "bus space (0x%08llx, 0x%08llx)\n",
+ __FILE__, (unsigned long long) card->mmio_region.start,
+ (unsigned long long) card->mmio_region.end);
}
return 0;
diff --git a/drivers/parisc/lba_pci.c b/drivers/parisc/lba_pci.c
index ede614616f8..3aeb3279c92 100644
--- a/drivers/parisc/lba_pci.c
+++ b/drivers/parisc/lba_pci.c
@@ -992,7 +992,7 @@ lba_pat_resources(struct parisc_device *pa_dev, struct lba_device *lba_dev)
return;
io_pdc_cell = kzalloc(sizeof(pdc_pat_cell_mod_maddr_block_t), GFP_KERNEL);
- if (!pa_pdc_cell) {
+ if (!io_pdc_cell) {
kfree(pa_pdc_cell);
return;
}
diff --git a/drivers/parisc/pdc_stable.c b/drivers/parisc/pdc_stable.c
index f9f9a5f1bbd..13a64bc081b 100644
--- a/drivers/parisc/pdc_stable.c
+++ b/drivers/parisc/pdc_stable.c
@@ -370,7 +370,7 @@ pdcspath_layer_read(struct pdcspath_entry *entry, char *buf)
if (!i) /* entry is not ready */
return -ENODATA;
- for (i = 0; devpath->layers[i] && (likely(i < 6)); i++)
+ for (i = 0; i < 6 && devpath->layers[i]; i++)
out += sprintf(out, "%u ", devpath->layers[i]);
out += sprintf(out, "\n");
diff --git a/drivers/video/console/sticore.c b/drivers/video/console/sticore.c
index ef7870f5ea0..857b3668b3b 100644
--- a/drivers/video/console/sticore.c
+++ b/drivers/video/console/sticore.c
@@ -957,9 +957,14 @@ static int __devinit sticore_pci_init(struct pci_dev *pd,
#ifdef CONFIG_PCI
unsigned long fb_base, rom_base;
unsigned int fb_len, rom_len;
+ int err;
struct sti_struct *sti;
- pci_enable_device(pd);
+ err = pci_enable_device(pd);
+ if (err < 0) {
+ dev_err(&pd->dev, "Cannot enable PCI device\n");
+ return err;
+ }
fb_base = pci_resource_start(pd, 0);
fb_len = pci_resource_len(pd, 0);
@@ -1048,7 +1053,7 @@ static void __devinit sti_init_roms(void)
/* Register drivers for native & PCI cards */
register_parisc_driver(&pa_sti_driver);
- pci_register_driver(&pci_sti_driver);
+ WARN_ON(pci_register_driver(&pci_sti_driver));
/* if we didn't find the given default sti, take the first one */
if (!default_sti)