diff options
Diffstat (limited to 'drivers')
38 files changed, 353 insertions, 321 deletions
diff --git a/drivers/acpi/apei/apei-base.c b/drivers/acpi/apei/apei-base.c index db3946e9c66..216e1e948ff 100644 --- a/drivers/acpi/apei/apei-base.c +++ b/drivers/acpi/apei/apei-base.c @@ -34,6 +34,7 @@ #include <linux/module.h> #include <linux/init.h> #include <linux/acpi.h> +#include <linux/slab.h> #include <linux/io.h> #include <linux/kref.h> #include <linux/rculist.h> diff --git a/drivers/acpi/atomicio.c b/drivers/acpi/atomicio.c index 814b1924961..8f8bd736d4f 100644 --- a/drivers/acpi/atomicio.c +++ b/drivers/acpi/atomicio.c @@ -31,6 +31,7 @@ #include <linux/kref.h> #include <linux/rculist.h> #include <linux/interrupt.h> +#include <linux/slab.h> #include <acpi/atomicio.h> #define ACPI_PFX "ACPI: " diff --git a/drivers/block/cciss_scsi.c b/drivers/block/cciss_scsi.c index 3381505c8a6..72dae92f3ca 100644 --- a/drivers/block/cciss_scsi.c +++ b/drivers/block/cciss_scsi.c @@ -861,6 +861,7 @@ cciss_scsi_detect(int ctlr) sh->n_io_port = 0; // I don't think we use these two... sh->this_id = SELF_SCSI_ID; sh->sg_tablesize = hba[ctlr]->maxsgentries; + sh->max_cmd_len = MAX_COMMAND_SIZE; ((struct cciss_scsi_adapter_data_t *) hba[ctlr]->scsi_ctlr)->scsi_host = sh; diff --git a/drivers/block/cpqarray.c b/drivers/block/cpqarray.c index 91d11631cec..abb4ec6690f 100644 --- a/drivers/block/cpqarray.c +++ b/drivers/block/cpqarray.c @@ -386,7 +386,7 @@ static void __devexit cpqarray_remove_one_eisa (int i) } /* pdev is NULL for eisa */ -static int __init cpqarray_register_ctlr( int i, struct pci_dev *pdev) +static int __devinit cpqarray_register_ctlr( int i, struct pci_dev *pdev) { struct request_queue *q; int j; @@ -503,7 +503,7 @@ Enomem4: return -1; } -static int __init cpqarray_init_one( struct pci_dev *pdev, +static int __devinit cpqarray_init_one( struct pci_dev *pdev, const struct pci_device_id *ent) { int i; @@ -740,7 +740,7 @@ __setup("smart2=", cpqarray_setup); /* * Find an EISA controller's signature. Set up an hba if we find it. */ -static int __init cpqarray_eisa_detect(void) +static int __devinit cpqarray_eisa_detect(void) { int i=0, j; __u32 board_id; diff --git a/drivers/block/drbd/drbd_main.c b/drivers/block/drbd/drbd_main.c index 6b077f93acc..7258c95e895 100644 --- a/drivers/block/drbd/drbd_main.c +++ b/drivers/block/drbd/drbd_main.c @@ -1236,8 +1236,6 @@ static void after_state_ch(struct drbd_conf *mdev, union drbd_state os, /* Last part of the attaching process ... */ if (ns.conn >= C_CONNECTED && os.disk == D_ATTACHING && ns.disk == D_NEGOTIATING) { - kfree(mdev->p_uuid); /* We expect to receive up-to-date UUIDs soon. */ - mdev->p_uuid = NULL; /* ...to not use the old ones in the mean time */ drbd_send_sizes(mdev, 0, 0); /* to start sync... */ drbd_send_uuids(mdev); drbd_send_state(mdev); diff --git a/drivers/block/drbd/drbd_nl.c b/drivers/block/drbd/drbd_nl.c index 632e3245d1b..2151f18b21d 100644 --- a/drivers/block/drbd/drbd_nl.c +++ b/drivers/block/drbd/drbd_nl.c @@ -1114,6 +1114,12 @@ static int drbd_nl_disk_conf(struct drbd_conf *mdev, struct drbd_nl_cfg_req *nlp mdev->new_state_tmp.i = ns.i; ns.i = os.i; ns.disk = D_NEGOTIATING; + + /* We expect to receive up-to-date UUIDs soon. + To avoid a race in receive_state, free p_uuid while + holding req_lock. I.e. atomic with the state change */ + kfree(mdev->p_uuid); + mdev->p_uuid = NULL; } rv = _drbd_set_state(mdev, ns, CS_VERBOSE, NULL); diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c index 35603dd4e6c..094bdc355b1 100644 --- a/drivers/char/ipmi/ipmi_si_intf.c +++ b/drivers/char/ipmi/ipmi_si_intf.c @@ -302,6 +302,12 @@ struct smi_info { static int force_kipmid[SI_MAX_PARMS]; static int num_force_kipmid; +#ifdef CONFIG_PCI +static int pci_registered; +#endif +#ifdef CONFIG_PPC_OF +static int of_registered; +#endif static unsigned int kipmid_max_busy_us[SI_MAX_PARMS]; static int num_max_busy_us; @@ -1018,7 +1024,7 @@ static int ipmi_thread(void *data) else if (smi_result == SI_SM_IDLE) schedule_timeout_interruptible(100); else - schedule_timeout_interruptible(0); + schedule_timeout_interruptible(1); } return 0; } @@ -3314,6 +3320,8 @@ static __devinit int init_ipmi_si(void) rv = pci_register_driver(&ipmi_pci_driver); if (rv) printk(KERN_ERR PFX "Unable to register PCI driver: %d\n", rv); + else + pci_registered = 1; #endif #ifdef CONFIG_ACPI @@ -3330,6 +3338,7 @@ static __devinit int init_ipmi_si(void) #ifdef CONFIG_PPC_OF of_register_platform_driver(&ipmi_of_platform_driver); + of_registered = 1; #endif /* We prefer devices with interrupts, but in the case of a machine @@ -3383,11 +3392,13 @@ static __devinit int init_ipmi_si(void) if (unload_when_empty && list_empty(&smi_infos)) { mutex_unlock(&smi_infos_lock); #ifdef CONFIG_PCI - pci_unregister_driver(&ipmi_pci_driver); + if (pci_registered) + pci_unregister_driver(&ipmi_pci_driver); #endif #ifdef CONFIG_PPC_OF - of_unregister_platform_driver(&ipmi_of_platform_driver); + if (of_registered) + of_unregister_platform_driver(&ipmi_of_platform_driver); #endif driver_unregister(&ipmi_driver.driver); printk(KERN_WARNING PFX @@ -3478,14 +3489,16 @@ static __exit void cleanup_ipmi_si(void) return; #ifdef CONFIG_PCI - pci_unregister_driver(&ipmi_pci_driver); + if (pci_registered) + pci_unregister_driver(&ipmi_pci_driver); #endif #ifdef CONFIG_ACPI pnp_unregister_driver(&ipmi_pnp_driver); #endif #ifdef CONFIG_PPC_OF - of_unregister_platform_driver(&ipmi_of_platform_driver); + if (of_registered) + of_unregister_platform_driver(&ipmi_of_platform_driver); #endif mutex_lock(&smi_infos_lock); diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index 724038dab4c..7face915b96 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -1,5 +1,5 @@ # -# GPIO infrastructure and expanders +# platform-neutral GPIO infrastructure and expanders # config ARCH_WANT_OPTIONAL_GPIOLIB diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile index 51c3cdd41b5..e53dcff49b4 100644 --- a/drivers/gpio/Makefile +++ b/drivers/gpio/Makefile @@ -1,4 +1,8 @@ -# gpio support: dedicated expander chips, etc +# generic gpio support: dedicated expander chips, etc +# +# NOTE: platform-specific GPIO drivers don't belong in the +# drivers/gpio directory; put them with other platform setup +# code, IRQ controllers, board init, etc. ccflags-$(CONFIG_DEBUG_GPIO) += -DDEBUG diff --git a/drivers/rtc/rtc-davinci.c b/drivers/rtc/rtc-davinci.c index 92a8f6cacda..34647fc1ee9 100644 --- a/drivers/rtc/rtc-davinci.c +++ b/drivers/rtc/rtc-davinci.c @@ -29,6 +29,7 @@ #include <linux/bcd.h> #include <linux/platform_device.h> #include <linux/io.h> +#include <linux/slab.h> /* * The DaVinci RTC is a simple RTC with the following diff --git a/drivers/rtc/rtc-ds1307.c b/drivers/rtc/rtc-ds1307.c index de033b7ac21..d827ce570a8 100644 --- a/drivers/rtc/rtc-ds1307.c +++ b/drivers/rtc/rtc-ds1307.c @@ -777,7 +777,7 @@ static int __devinit ds1307_probe(struct i2c_client *client, read_rtc: /* read RTC registers */ - tmp = ds1307->read_block_data(ds1307->client, 0, 8, buf); + tmp = ds1307->read_block_data(ds1307->client, ds1307->offset, 8, buf); if (tmp != 8) { pr_debug("read error %d\n", tmp); err = -EIO; @@ -862,7 +862,7 @@ read_rtc: if (ds1307->regs[DS1307_REG_HOUR] & DS1307_BIT_PM) tmp += 12; i2c_smbus_write_byte_data(client, - DS1307_REG_HOUR, + ds1307->offset + DS1307_REG_HOUR, bin2bcd(tmp)); } diff --git a/drivers/serial/cpm_uart/cpm_uart_core.c b/drivers/serial/cpm_uart/cpm_uart_core.c index 9eb62a256e9..cd6cf575902 100644 --- a/drivers/serial/cpm_uart/cpm_uart_core.c +++ b/drivers/serial/cpm_uart/cpm_uart_core.c @@ -930,6 +930,83 @@ static void cpm_uart_config_port(struct uart_port *port, int flags) } } +#if defined(CONFIG_CONSOLE_POLL) || defined(CONFIG_SERIAL_CPM_CONSOLE) +/* + * Write a string to the serial port + * Note that this is called with interrupts already disabled + */ +static void cpm_uart_early_write(struct uart_cpm_port *pinfo, + const char *string, u_int count) +{ + unsigned int i; + cbd_t __iomem *bdp, *bdbase; + unsigned char *cpm_outp_addr; + + /* Get the address of the host memory buffer. + */ + bdp = pinfo->tx_cur; + bdbase = pinfo->tx_bd_base; + + /* + * Now, do each character. This is not as bad as it looks + * since this is a holding FIFO and not a transmitting FIFO. + * We could add the complexity of filling the entire transmit + * buffer, but we would just wait longer between accesses...... + */ + for (i = 0; i < count; i++, string++) { + /* Wait for transmitter fifo to empty. + * Ready indicates output is ready, and xmt is doing + * that, not that it is ready for us to send. + */ + while ((in_be16(&bdp->cbd_sc) & BD_SC_READY) != 0) + ; + + /* Send the character out. + * If the buffer address is in the CPM DPRAM, don't + * convert it. + */ + cpm_outp_addr = cpm2cpu_addr(in_be32(&bdp->cbd_bufaddr), + pinfo); + *cpm_outp_addr = *string; + + out_be16(&bdp->cbd_datlen, 1); + setbits16(&bdp->cbd_sc, BD_SC_READY); + + if (in_be16(&bdp->cbd_sc) & BD_SC_WRAP) + bdp = bdbase; + else + bdp++; + + /* if a LF, also do CR... */ + if (*string == 10) { + while ((in_be16(&bdp->cbd_sc) & BD_SC_READY) != 0) + ; + + cpm_outp_addr = cpm2cpu_addr(in_be32(&bdp->cbd_bufaddr), + pinfo); + *cpm_outp_addr = 13; + + out_be16(&bdp->cbd_datlen, 1); + setbits16(&bdp->cbd_sc, BD_SC_READY); + + if (in_be16(&bdp->cbd_sc) & BD_SC_WRAP) + bdp = bdbase; + else + bdp++; + } + } + + /* + * Finally, Wait for transmitter & holding register to empty + * and restore the IER + */ + while ((in_be16(&bdp->cbd_sc) & BD_SC_READY) != 0) + ; + + pinfo->tx_cur = bdp; +} +#endif + #ifdef CONFIG_CONSOLE_POLL /* Serial polling routines for writing and reading from the uart while * in an interrupt or debug context. @@ -999,7 +1076,7 @@ static void cpm_put_poll_char(struct uart_port *port, static char ch[2]; ch[0] = (char)c; - cpm_uart_early_write(pinfo->port.line, ch, 1); + cpm_uart_early_write(pinfo, ch, 1); } #endif /* CONFIG_CONSOLE_POLL */ @@ -1130,9 +1207,6 @@ static void cpm_uart_console_write(struct console *co, const char *s, u_int count) { struct uart_cpm_port *pinfo = &cpm_uart_ports[co->index]; - unsigned int i; - cbd_t __iomem *bdp, *bdbase; - unsigned char *cp; unsigned long flags; int nolock = oops_in_progress; @@ -1142,66 +1216,7 @@ static void cpm_uart_console_write(struct console *co, const char *s, spin_lock_irqsave(&pinfo->port.lock, flags); } - /* Get the address of the host memory buffer. - */ - bdp = pinfo->tx_cur; - bdbase = pinfo->tx_bd_base; - - /* - * Now, do each character. This is not as bad as it looks - * since this is a holding FIFO and not a transmitting FIFO. - * We could add the complexity of filling the entire transmit - * buffer, but we would just wait longer between accesses...... - */ - for (i = 0; i < count; i++, s++) { - /* Wait for transmitter fifo to empty. - * Ready indicates output is ready, and xmt is doing - * that, not that it is ready for us to send. - */ - while ((in_be16(&bdp->cbd_sc) & BD_SC_READY) != 0) - ; - - /* Send the character out. - * If the buffer address is in the CPM DPRAM, don't - * convert it. - */ - cp = cpm2cpu_addr(in_be32(&bdp->cbd_bufaddr), pinfo); - *cp = *s; - - out_be16(&bdp->cbd_datlen, 1); - setbits16(&bdp->cbd_sc, BD_SC_READY); - - if (in_be16(&bdp->cbd_sc) & BD_SC_WRAP) - bdp = bdbase; - else - bdp++; - - /* if a LF, also do CR... */ - if (*s == 10) { - while ((in_be16(&bdp->cbd_sc) & BD_SC_READY) != 0) - ; - - cp = cpm2cpu_addr(in_be32(&bdp->cbd_bufaddr), pinfo); - *cp = 13; - - out_be16(&bdp->cbd_datlen, 1); - setbits16(&bdp->cbd_sc, BD_SC_READY); - - if (in_be16(&bdp->cbd_sc) & BD_SC_WRAP) - bdp = bdbase; - else - bdp++; - } - } - - /* - * Finally, Wait for transmitter & holding register to empty - * and restore the IER - */ - while ((in_be16(&bdp->cbd_sc) & BD_SC_READY) != 0) - ; - - pinfo->tx_cur = bdp; + cpm_uart_early_write(pinfo, s, count); if (unlikely(nolock)) { local_irq_restore(flags); diff --git a/drivers/staging/tm6000/tm6000-alsa.c b/drivers/staging/tm6000/tm6000-alsa.c index ce081cd44ad..273e26ede65 100644 --- a/drivers/staging/tm6000/tm6000-alsa.c +++ b/drivers/staging/tm6000/tm6000-alsa.c @@ -15,6 +15,7 @@ #include <linux/device.h> #include <linux/interrupt.h> #include <linux/usb.h> +#include <linux/slab.h> #include <asm/delay.h> #include <sound/core.h> diff --git a/drivers/staging/tm6000/tm6000-cards.c b/drivers/staging/tm6000/tm6000-cards.c index cedd9044022..6a9ae40c7c6 100644 --- a/drivers/staging/tm6000/tm6000-cards.c +++ b/drivers/staging/tm6000/tm6000-cards.c @@ -24,6 +24,7 @@ #include <linux/i2c.h> #include <linux/usb.h> #include <linux/version.h> +#include <linux/slab.h> #include <media/v4l2-common.h> #include <media/tuner.h> #include <media/tvaudio.h> diff --git a/drivers/staging/tm6000/tm6000-core.c b/drivers/staging/tm6000/tm6000-core.c index 27f3f551b54..c3690e3580d 100644 --- a/drivers/staging/tm6000/tm6000-core.c +++ b/drivers/staging/tm6000/tm6000-core.c @@ -22,6 +22,7 @@ #include <linux/module.h> #include <linux/kernel.h> +#include <linux/slab.h> #include <linux/usb.h> #include <linux/i2c.h> #include "tm6000.h" diff --git a/drivers/staging/tm6000/tm6000-dvb.c b/drivers/staging/tm6000/tm6000-dvb.c index 261e66acbe4..86c1c8b5f25 100644 --- a/drivers/staging/tm6000/tm6000-dvb.c +++ b/drivers/staging/tm6000/tm6000-dvb.c @@ -18,6 +18,7 @@ */ #include <linux/kernel.h> +#include <linux/slab.h> #include <linux/usb.h> #include "tm6000.h" diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c index de98a94d185..a6bd53ace03 100644 --- a/drivers/usb/core/driver.c +++ b/drivers/usb/core/driver.c @@ -1272,8 +1272,7 @@ static int usb_resume_both(struct usb_device *udev, pm_message_t msg) static void choose_wakeup(struct usb_device *udev, pm_message_t msg) { - int w, i; - struct usb_interface *intf; + int w; /* Remote wakeup is needed only when we actually go to sleep. * For things like FREEZE and QUIESCE, if the device is already @@ -1285,16 +1284,10 @@ static void choose_wakeup(struct usb_device *udev, pm_message_t msg) return; } - /* If remote wakeup is permitted, see whether any interface drivers + /* Enable remote wakeup if it is allowed, even if no interface drivers * actually want it. */ - w = 0; - if (device_may_wakeup(&udev->dev) && udev->actconfig) { - for (i = 0; i < udev->actconfig->desc.bNumInterfaces; i++) { - intf = udev->actconfig->interface[i]; - w |= intf->needs_remote_wakeup; - } - } + w = device_may_wakeup(&udev->dev); /* If the device is autosuspended with the wrong wakeup setting, * autoresume now so the setting can be changed. diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c index a73e08fdab3..fd4c36ea5e4 100644 --- a/drivers/usb/core/message.c +++ b/drivers/usb/core/message.c @@ -416,8 +416,11 @@ int usb_sg_init(struct usb_sg_request *io, struct usb_device *dev, /* A length of zero means transfer the whole sg list */ len = length; if (len == 0) { - for_each_sg(sg, sg, nents, i) - len += sg->length; + struct scatterlist *sg2; + int j; + + for_each_sg(sg, sg2, nents, j) + len += sg2->length; } } else { /* diff --git a/drivers/usb/gadget/f_eem.c b/drivers/usb/gadget/f_eem.c index 38226e9a371..95dd4662d6a 100644 --- a/drivers/usb/gadget/f_eem.c +++ b/drivers/usb/gadget/f_eem.c @@ -469,8 +469,7 @@ static int eem_unwrap(struct gether *port, crc = get_unaligned_le32(skb->data + len - ETH_FCS_LEN); crc2 = ~crc32_le(~0, - skb->data, - skb->len - ETH_FCS_LEN); + skb->data, len - ETH_FCS_LEN); } else { crc = get_unaligned_be32(skb->data + len - ETH_FCS_LEN); diff --git a/drivers/usb/gadget/f_mass_storage.c b/drivers/usb/gadget/f_mass_storage.c index 7d05a0be5c6..4ce899c9b16 100644 --- a/drivers/usb/gadget/f_mass_storage.c +++ b/drivers/usb/gadget/f_mass_storage.c @@ -321,8 +321,8 @@ struct fsg_dev; /* Data shared by all the FSG instances. */ struct fsg_common { struct usb_gadget *gadget; - struct fsg_dev *fsg; - struct fsg_dev *prev_fsg; + struct fsg_dev *fsg, *new_fsg; + wait_queue_head_t fsg_wait; /* filesem protects: backing files in use */ struct rw_semaphore filesem; @@ -351,7 +351,6 @@ struct fsg_common { enum fsg_state state; /* For exception handling */ unsigned int exception_req_tag; - u8 config, new_config; enum data_direction data_dir; u32 data_size; u32 data_size_from_cmnd; @@ -595,7 +594,7 @@ static int fsg_setup(struct usb_function *f, u16 w_value = le16_to_cpu(ctrl->wValue); u16 w_length = le16_to_cpu(ctrl->wLength); - if (!fsg->common->config) + if (!fsg_is_set(fsg->common)) return -EOPNOTSUPP; switch (ctrl->bRequest) { @@ -2303,24 +2302,20 @@ static int alloc_request(struct fsg_common *common, struct usb_ep *ep, return -ENOMEM; } -/* - * Reset interface setting and re-init endpoint state (toggle etc). - * Call with altsetting < 0 to disable the interface. The only other - * available altsetting is 0, which enables the interface. - */ -static int do_set_interface(struct fsg_common *common, int altsetting) +/* Reset interface setting and re-init endpoint state (toggle etc). */ +static int do_set_interface(struct fsg_common *common, struct fsg_dev *new_fsg) { - int rc = 0; - int i; - const struct usb_endpoint_descriptor *d; + const struct usb_endpoint_descriptor *d; + struct fsg_dev *fsg; + int i, rc = 0; if (common->running) DBG(common, "reset interface\n"); reset: /* Deallocate the requests */ - if (common->prev_fsg) { - struct fsg_dev *fsg = common->prev_fsg; + if (common->fsg) { + fsg = common->fsg; for (i = 0; i < FSG_NUM_BUFFERS; ++i) { struct fsg_buffhd *bh = &common->buffhds[i]; @@ -2345,88 +2340,53 @@ reset: fsg->bulk_out_enabled = 0; } - common->prev_fsg = 0; + common->fsg = NULL; + wake_up(&common->fsg_wait); } common->running = 0; - if (altsetting < 0 || rc != 0) + if (!new_fsg || rc) return rc; - DBG(common, "set interface %d\n", altsetting); + common->fsg = new_fsg; + fsg = common->fsg; - if (fsg_is_set(common)) { - struct fsg_dev *fsg = common->fsg; - common->prev_fsg = common->fsg; + /* Enable the endpoints */ + d = fsg_ep_desc(common->gadget, + &fsg_fs_bulk_in_desc, &fsg_hs_bulk_in_desc); + rc = enable_endpoint(common, fsg->bulk_in, d); + if (rc) + goto reset; + fsg->bulk_in_enabled = 1; + + d = fsg_ep_desc(common->gadget, + &fsg_fs_bulk_out_desc, &fsg_hs_bulk_out_desc); + rc = enable_endpoint(common, fsg->bulk_out, d); + if (rc) + goto reset; + fsg->bulk_out_enabled = 1; + common->bulk_out_maxpacket = le16_to_cpu(d->wMaxPacketSize); + clear_bit(IGNORE_BULK_OUT, &fsg->atomic_bitflags); - /* Enable the endpoints */ - d = fsg_ep_desc(common->gadget, - &fsg_fs_bulk_in_desc, &fsg_hs_bulk_in_desc); - rc = enable_endpoint(common, fsg->bulk_in, d); + /* Allocate the requests */ + for (i = 0; i < FSG_NUM_BUFFERS; ++i) { + struct fsg_buffhd *bh = &common->buffhds[i]; + + rc = alloc_request(common, fsg->bulk_in, &bh->inreq); if (rc) goto reset; - fsg->bulk_in_enabled = 1; - - d = fsg_ep_desc(common->gadget, - &fsg_fs_bulk_out_desc, &fsg_hs_bulk_out_desc); - rc = enable_endpoint(common, fsg->bulk_out, d); + rc = alloc_request(common, fsg->bulk_out, &bh->outreq); if (rc) goto reset; - fsg->bulk_out_enabled = 1; - common->bulk_out_maxpacket = le16_to_cpu(d->wMaxPacketSize); - clear_bit(IGNORE_BULK_OUT, &fsg->atomic_bitflags); - - /* Allocate the requests */ - for (i = 0; i < FSG_NUM_BUFFERS; ++i) { - struct fsg_buffhd *bh = &common->buffhds[i]; - - rc = alloc_request(common, fsg->bulk_in, &bh->inreq); - if (rc) - goto reset; - rc = alloc_request(common, fsg->bulk_out, &bh->outreq); - if (rc) - goto reset; - bh->inreq->buf = bh->outreq->buf = bh->buf; - bh->inreq->context = bh->outreq->context = bh; - bh->inreq->complete = bulk_in_complete; - bh->outreq->complete = bulk_out_complete; - } - - common->running = 1; - for (i = 0; i < common->nluns; ++i) - common->luns[i].unit_attention_data = SS_RESET_OCCURRED; - return rc; - } else { - return -EIO; - } -} - - -/* - * Change our operational configuration. This code must agree with the code - * that returns config descriptors, and with interface altsetting code. - * - * It's also responsible for power management interactions. Some - * configurations might not work with our current power sources. - * For now we just assume the gadget is always self-powered. - */ -static int do_set_config(struct fsg_common *common, u8 new_config) -{ - int rc = 0; - - /* Disable the single interface */ - if (common->config != 0) { - DBG(common, "reset config\n"); - common->config = 0; - rc = do_set_interface(common, -1); + bh->inreq->buf = bh->outreq->buf = bh->buf; + bh->inreq->context = bh->outreq->context = bh; + bh->inreq->complete = bulk_in_complete; + bh->outreq->complete = bulk_out_complete; } - /* Enable the interface */ - if (new_config != 0) { - common->config = new_config; - rc = do_set_interface(common, 0); - if (rc != 0) - common->config = 0; /* Reset on errors */ - } + common->running = 1; + for (i = 0; i < common->nluns; ++i) + common->luns[i].unit_attention_data = SS_RESET_OCCURRED; return rc; } @@ -2437,9 +2397,7 @@ static int do_set_config(struct fsg_common *common, u8 new_config) static int fsg_set_alt(struct usb_function *f, unsigned intf, unsigned alt) { struct fsg_dev *fsg = fsg_from_func(f); - fsg->common->prev_fsg = fsg->common->fsg; - fsg->common->fsg = fsg; - fsg->common->new_config = 1; + fsg->common->new_fsg = fsg; raise_exception(fsg->common, FSG_STATE_CONFIG_CHANGE); return 0; } @@ -2447,9 +2405,7 @@ static int fsg_set_alt(struct usb_function *f, unsigned intf, unsigned alt) static void fsg_disable(struct usb_function *f) { struct fsg_dev *fsg = fsg_from_func(f); - fsg->common->prev_fsg = fsg->common->fsg; - fsg->common->fsg = fsg; - fsg->common->new_config = 0; + fsg->common->new_fsg = NULL; raise_exception(fsg->common, FSG_STATE_CONFIG_CHANGE); } @@ -2459,19 +2415,17 @@ static void fsg_disable(struct usb_function *f) static void handle_exception(struct fsg_common *common) { siginfo_t info; - int sig; int i; struct fsg_buffhd *bh; enum fsg_state old_state; - u8 new_config; struct fsg_lun *curlun; unsigned int exception_req_tag; - int rc; /* Clear the existing signals. Anything but SIGUSR1 is converted * into a high-priority EXIT exception. */ for (;;) { - sig = dequeue_signal_lock(current, ¤t->blocked, &info); + int sig = + dequeue_signal_lock(current, ¤t->blocked, &info); if (!sig) break; if (sig != SIGUSR1) { @@ -2482,7 +2436,7 @@ static void handle_exception(struct fsg_common *common) } /* Cancel all the pending transfers */ - if (fsg_is_set(common)) { + if (likely(common->fsg)) { for (i = 0; i < FSG_NUM_BUFFERS; ++i) { bh = &common->buffhds[i]; if (bh->inreq_busy) @@ -2523,7 +2477,6 @@ static void handle_exception(struct fsg_common *common) common->next_buffhd_to_fill = &common->buffhds[0]; common->next_buffhd_to_drain = &common->buffhds[0]; exception_req_tag = common->exception_req_tag; - new_config = common->new_config; old_state = common->state; if (old_state == FSG_STATE_ABORT_BULK_OUT) @@ -2573,12 +2526,12 @@ static void handle_exception(struct fsg_common *common) break; case FSG_STATE_CONFIG_CHANGE: - rc = do_set_config(common, new_config); + do_set_interface(common, common->new_fsg); break; case FSG_STATE_EXIT: case FSG_STATE_TERMINATED: - do_set_config(common, 0); /* Free resources */ + do_set_interface(common, NULL); /* Free resources */ spin_lock_irq(&common->lock); common->state = FSG_STATE_TERMINATED; /* Stop the thread */ spin_unlock_irq(&common->lock); @@ -2863,6 +2816,7 @@ buffhds_first_it: goto error_release; } init_completion(&common->thread_notifier); + init_waitqueue_head(&common->fsg_wait); #undef OR @@ -2957,9 +2911,17 @@ static void fsg_common_release(struct kref *ref) static void fsg_unbind(struct usb_configuration *c, struct usb_function *f) { struct fsg_dev *fsg = fsg_from_func(f); + struct fsg_common *common = fsg->common; DBG(fsg, "unbind\n"); - fsg_common_put(fsg->common); + if (fsg->common->fsg == fsg) { + fsg->common->new_fsg = NULL; + raise_exception(fsg->common, FSG_STATE_CONFIG_CHANGE); + /* FIXME: make interruptible or killable somehow? */ + wait_event(common->fsg_wait, common->fsg != fsg); + } + + fsg_common_put(common); usb_free_descriptors(fsg->function.descriptors); usb_free_descriptors(fsg->function.hs_descriptors); kfree(fsg); @@ -2970,7 +2932,6 @@ static int fsg_bind(struct usb_configuration *c, struct usb_function *f) { struct fsg_dev *fsg = fsg_from_func(f); struct usb_gadget *gadget = c->cdev->gadget; - int rc; int i; struct usb_ep *ep; @@ -2996,6 +2957,11 @@ static int fsg_bind(struct usb_configuration *c, struct usb_function *f) ep->driver_data = fsg->common; /* claim the endpoint */ fsg->bulk_out = ep; + /* Copy descriptors */ + f->descriptors = usb_copy_descriptors(fsg_fs_function); + if (unlikely(!f->descriptors)) + return -ENOMEM; + if (gadget_is_dualspeed(gadget)) { /* Assume endpoint addresses are the same for both speeds */ fsg_hs_bulk_in_desc.bEndpointAddress = @@ -3003,16 +2969,17 @@ static int fsg_bind(struct usb_configuration *c, struct usb_function *f) fsg_hs_bulk_out_desc.bEndpointAddress = fsg_fs_bulk_out_desc.bEndpointAddress; f->hs_descriptors = usb_copy_descriptors(fsg_hs_function); - if (unlikely(!f->hs_descriptors)) + if (unlikely(!f->hs_descriptors)) { + usb_free_descriptors(f->descriptors); return -ENOMEM; + } } return 0; autoconf_fail: ERROR(fsg, "unable to autoconfigure all endpoints\n"); - rc = -ENOTSUPP; - return rc; + return -ENOTSUPP; } @@ -3036,11 +3003,6 @@ static int fsg_add(struct usb_composite_dev *cdev, fsg->function.name = FSG_DRIVER_DESC; fsg->function.strings = fsg_strings_array; - fsg->function.descriptors = usb_copy_descriptors(fsg_fs_function); - if (unlikely(!fsg->function.descriptors)) { - rc = -ENOMEM; - goto error_free_fsg; - } fsg->function.bind = fsg_bind; fsg->function.unbind = fsg_unbind; fsg->function.setup = fsg_setup; @@ -3056,19 +3018,9 @@ static int fsg_add(struct usb_composite_dev *cdev, rc = usb_add_function(c, &fsg->function); if (unlikely(rc)) - goto error_free_all; - - fsg_common_get(fsg->common); - return 0; - -error_free_all: - usb_free_descriptors(fsg->function.descriptors); - /* fsg_bind() might have copied those; or maybe not? who cares - * -- free it just in case. */ - usb_free_descriptors(fsg->function.hs_descriptors); -error_free_fsg: - kfree(fsg); - + kfree(fsg); + else + fsg_common_get(fsg->common); return rc; } diff --git a/drivers/usb/gadget/g_ffs.c b/drivers/usb/gadget/g_ffs.c index 4b0e4a040d6..d1af253a910 100644 --- a/drivers/usb/gadget/g_ffs.c +++ b/drivers/usb/gadget/g_ffs.c @@ -392,6 +392,17 @@ static int __gfs_do_config(struct usb_configuration *c, if (unlikely(ret < 0)) return ret; + /* After previous do_configs there may be some invalid + * pointers in c->interface array. This happens every time + * a user space function with fewer interfaces than a user + * space function that was run before the new one is run. The + * compasit's set_config() assumes that if there is no more + * then MAX_CONFIG_INTERFACES interfaces in a configuration + * then there is a NULL pointer after the last interface in + * c->interface array. We need to make sure this is true. */ + if (c->next_interface_id < ARRAY_SIZE(c->interface)) + c->interface[c->next_interface_id] = NULL; + return 0; } diff --git a/drivers/usb/gadget/printer.c b/drivers/usb/gadget/printer.c index 43abf55d8c6..4c3ac5c4223 100644 --- a/drivers/usb/gadget/printer.c +++ b/drivers/usb/gadget/printer.c @@ -82,7 +82,7 @@ static struct class *usb_gadget_class; struct printer_dev { spinlock_t lock; /* lock this structure */ /* lock buffer lists during read/write calls */ - spinlock_t lock_printer_io; + struct mutex lock_printer_io; struct usb_gadget *gadget; struct usb_request *req; /* for control responses */ u8 config; @@ -567,7 +567,7 @@ printer_read(struct file *fd, char __user *buf, size_t len, loff_t *ptr) DBG(dev, "printer_read trying to read %d bytes\n", (int)len); - spin_lock(&dev->lock_printer_io); + mutex_lock(&dev->lock_printer_io); spin_lock_irqsave(&dev->lock, flags); /* We will use this flag later to check if a printer reset happened @@ -601,7 +601,7 @@ printer_read(struct file *fd, char __user *buf, size_t len, loff_t *ptr) * call or not. */ if (fd->f_flags & (O_NONBLOCK|O_NDELAY)) { - spin_unlock(&dev->lock_printer_io); + mutex_unlock(&dev->lock_printer_io); return -EAGAIN; } @@ -648,7 +648,7 @@ printer_read(struct file *fd, char __user *buf, size_t len, loff_t *ptr) if (dev->reset_printer) { list_add(¤t_rx_req->list, &dev->rx_reqs); spin_unlock_irqrestore(&dev->lock, flags); - spin_unlock(&dev->lock_printer_io); + mutex_unlock(&dev->lock_printer_io); return -EAGAIN; } @@ -673,7 +673,7 @@ printer_read(struct file *fd, char __user *buf, size_t len, loff_t *ptr) dev->current_rx_buf = current_rx_buf; spin_unlock_irqrestore(&dev->lock, flags); - spin_unlock(&dev->lock_printer_io); + mutex_unlock(&dev->lock_printer_io); DBG(dev, "printer_read returned %d bytes\n", (int)bytes_copied); @@ -697,7 +697,7 @@ printer_write(struct file *fd, const char __user *buf, size_t len, loff_t *ptr) if (len == 0) return -EINVAL; - spin_lock(&dev->lock_printer_io); + mutex_lock(&dev->lock_printer_io); spin_lock_irqsave(&dev->lock, flags); /* Check if a printer reset happens while we have interrupts on */ @@ -713,7 +713,7 @@ printer_write(struct file *fd, const char __user *buf, size_t len, loff_t *ptr) * a NON-Blocking call or not. */ if (fd->f_flags & (O_NONBLOCK|O_NDELAY)) { - spin_unlock(&dev->lock_printer_io); + mutex_unlock(&dev->lock_printer_io); return -EAGAIN; } @@ -752,7 +752,7 @@ printer_write(struct file *fd, const char __user *buf, size_t len, loff_t *ptr) if (copy_from_user(req->buf, buf, size)) { list_add(&req->list, &dev->tx_reqs); - spin_unlock(&dev->lock_printer_io); + mutex_unlock(&dev->lock_printer_io); return bytes_copied; } @@ -766,14 +766,14 @@ printer_write(struct file *fd, const char __user *buf, size_t len, loff_t *ptr) if (dev->reset_printer) { list_add(&req->list, &dev->tx_reqs); spin_unlock_irqrestore(&dev->lock, flags); - spin_unlock(&dev->lock_printer_io); + mutex_unlock(&dev->lock_printer_io); return -EAGAIN; } if (usb_ep_queue(dev->in_ep, req, GFP_ATOMIC)) { list_add(&req->list, &dev->tx_reqs); spin_unlock_irqrestore(&dev->lock, flags); - spin_unlock(&dev->lock_printer_io); + mutex_unlock(&dev->lock_printer_io); return -EAGAIN; } @@ -782,7 +782,7 @@ printer_write(struct file *fd, const char __user *buf, size_t len, loff_t *ptr) } spin_unlock_irqrestore(&dev->lock, flags); - spin_unlock(&dev->lock_printer_io); + mutex_unlock(&dev->lock_printer_io); DBG(dev, "printer_write sent %d bytes\n", (int)bytes_copied); @@ -820,11 +820,11 @@ printer_poll(struct file *fd, poll_table *wait) unsigned long flags; int status = 0; - spin_lock(&dev->lock_printer_io); + mutex_lock(&dev->lock_printer_io); spin_lock_irqsave(&dev->lock, flags); setup_rx_reqs(dev); spin_unlock_irqrestore(&dev->lock, flags); - spin_unlock(&dev->lock_printer_io); + mutex_unlock(&dev->lock_printer_io); poll_wait(fd, &dev->rx_wait, wait); poll_wait(fd, &dev->tx_wait, wait); @@ -1461,7 +1461,7 @@ autoconf_fail: } spin_lock_init(&dev->lock); - spin_lock_init(&dev->lock_printer_io); + mutex_init(&dev->lock_printer_io); INIT_LIST_HEAD(&dev->tx_reqs); INIT_LIST_HEAD(&dev->tx_reqs_active); INIT_LIST_HEAD(&dev->rx_reqs); @@ -1594,7 +1594,7 @@ cleanup(void) { int status; - spin_lock(&usb_printer_gadget.lock_printer_io); + mutex_lock(&usb_printer_gadget.lock_printer_io); class_destroy(usb_gadget_class); unregister_chrdev_region(g_printer_devno, 2); @@ -1602,6 +1602,6 @@ cleanup(void) if (status) ERROR(dev, "usb_gadget_unregister_driver %x\n", status); - spin_unlock(&usb_printer_gadget.lock_printer_io); + mutex_unlock(&usb_printer_gadget.lock_printer_io); } module_exit(cleanup); diff --git a/drivers/usb/gadget/s3c2410_udc.c b/drivers/usb/gadget/s3c2410_udc.c index d5f4c1d45c9..e724a051bfd 100644 --- a/drivers/usb/gadget/s3c2410_udc.c +++ b/drivers/usb/gadget/s3c2410_udc.c @@ -1700,9 +1700,13 @@ int usb_gadget_unregister_driver(struct usb_gadget_driver *driver) if (!driver || driver != udc->driver || !driver->unbind) return -EINVAL; - dprintk(DEBUG_NORMAL,"usb_gadget_register_driver() '%s'\n", + dprintk(DEBUG_NORMAL, "usb_gadget_unregister_driver() '%s'\n", driver->driver.name); + /* report disconnect */ + if (driver->disconnect) + driver->disconnect(&udc->gadget); + driver->unbind(&udc->gadget); device_del(&udc->gadget.dev); diff --git a/drivers/usb/gadget/u_serial.c b/drivers/usb/gadget/u_serial.c index 16bdf77f582..3e8dcb5455e 100644 --- a/drivers/usb/gadget/u_serial.c +++ b/drivers/usb/gadget/u_serial.c @@ -536,17 +536,11 @@ recycle: list_move(&req->list, &port->read_pool); } - /* Push from tty to ldisc; this is immediate with low_latency, and - * may trigger callbacks to this driver ... so drop the spinlock. + /* Push from tty to ldisc; without low_latency set this is handled by + * a workqueue, so we won't get callbacks and can hold port_lock */ if (tty && do_push) { - spin_unlock_irq(&port->port_lock); tty_flip_buffer_push(tty); - wake_up_interruptible(&tty->read_wait); - spin_lock_irq(&port->port_lock); - - /* tty may have been closed */ - tty = port->port_tty; } @@ -784,11 +778,6 @@ static int gs_open(struct tty_struct *tty, struct file *file) port->open_count = 1; port->openclose = false; - /* low_latency means ldiscs work in tasklet context, without - * needing a workqueue schedule ... easier to keep up. - */ - tty->low_latency = 1; - /* if connected, start the I/O stream */ if (port->port_usb) { struct gserial *gser = port->port_usb; @@ -1195,6 +1184,7 @@ void gserial_cleanup(void) n_ports = 0; tty_unregister_driver(gs_tty_driver); + put_tty_driver(gs_tty_driver); gs_tty_driver = NULL; pr_debug("%s: cleaned up ttyGS* support\n", __func__); diff --git a/drivers/usb/host/ehci-mxc.c b/drivers/usb/host/ehci-mxc.c index 544ccfd7056..bd4027745aa 100644 --- a/drivers/usb/host/ehci-mxc.c +++ b/drivers/usb/host/ehci-mxc.c @@ -207,10 +207,17 @@ static int ehci_mxc_drv_probe(struct platform_device *pdev) /* Initialize the transceiver */ if (pdata->otg) { pdata->otg->io_priv = hcd->regs + ULPI_VIEWPORT_OFFSET; - if (otg_init(pdata->otg) != 0) - dev_err(dev, "unable to init transceiver\n"); - else if (otg_set_vbus(pdata->otg, 1) != 0) + ret = otg_init(pdata->otg); + if (ret) { + dev_err(dev, "unable to init transceiver, probably missing\n"); + ret = -ENODEV; + goto err_add; + } + ret = otg_set_vbus(pdata->otg, 1); + if (ret) { dev_err(dev, "unable to enable vbus on transceiver\n"); + goto err_add; + } } priv->hcd = hcd; diff --git a/drivers/usb/host/isp1362-hcd.c b/drivers/usb/host/isp1362-hcd.c index 20a0dfe0fe3..0587ad4ce5c 100644 --- a/drivers/usb/host/isp1362-hcd.c +++ b/drivers/usb/host/isp1362-hcd.c @@ -2224,12 +2224,9 @@ static void remove_debug_file(struct isp1362_hcd *isp1362_hcd) /*-------------------------------------------------------------------------*/ -static void isp1362_sw_reset(struct isp1362_hcd *isp1362_hcd) +static void __isp1362_sw_reset(struct isp1362_hcd *isp1362_hcd) { int tmp = 20; - unsigned long flags; - - spin_lock_irqsave(&isp1362_hcd->lock, flags); isp1362_write_reg16(isp1362_hcd, HCSWRES, HCSWRES_MAGIC); isp1362_write_reg32(isp1362_hcd, HCCMDSTAT, OHCI_HCR); @@ -2240,6 +2237,14 @@ static void isp1362_sw_reset(struct isp1362_hcd *isp1362_hcd) } if (!tmp) pr_err("Software reset timeout\n"); +} + +static void isp1362_sw_reset(struct isp1362_hcd *isp1362_hcd) +{ + unsigned long flags; + + spin_lock_irqsave(&isp1362_hcd->lock, flags); + __isp1362_sw_reset(isp1362_hcd); spin_unlock_irqrestore(&isp1362_hcd->lock, flags); } @@ -2418,7 +2423,7 @@ static void isp1362_hc_stop(struct usb_hcd *hcd) if (isp1362_hcd->board && isp1362_hcd->board->reset) isp1362_hcd->board->reset(hcd->self.controller, 1); else - isp1362_sw_reset(isp1362_hcd); + __isp1362_sw_reset(isp1362_hcd); if (isp1362_hcd->board && isp1362_hcd->board->clock) isp1362_hcd->board->clock(hcd->self.controller, 0); diff --git a/drivers/usb/host/r8a66597-hcd.c b/drivers/usb/host/r8a66597-hcd.c index 1a2bb4ce638..77be3c24a42 100644 --- a/drivers/usb/host/r8a66597-hcd.c +++ b/drivers/usb/host/r8a66597-hcd.c @@ -1065,7 +1065,7 @@ static void r8a66597_usb_connect(struct r8a66597 *r8a66597, int port) else if (speed == LSMODE) rh->port |= USB_PORT_STAT_LOW_SPEED; - rh->port &= USB_PORT_STAT_RESET; + rh->port &= ~USB_PORT_STAT_RESET; rh->port |= USB_PORT_STAT_ENABLE; } diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 9012098add6..94e6934edb0 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -182,8 +182,12 @@ static void inc_deq(struct xhci_hcd *xhci, struct xhci_ring *ring, bool consumer * set, but other sections talk about dealing with the chain bit set. This was * fixed in the 0.96 specification errata, but we have to assume that all 0.95 * xHCI hardware can't handle the chain bit being cleared on a link TRB. + * + * @more_trbs_coming: Will you enqueue more TRBs before calling + * prepare_transfer()? */ -static void inc_enq(struct xhci_hcd *xhci, struct xhci_ring *ring, bool consumer) +static void inc_enq(struct xhci_hcd *xhci, struct xhci_ring *ring, + bool consumer, bool more_trbs_coming) { u32 chain; union xhci_trb *next; @@ -199,15 +203,28 @@ static void inc_enq(struct xhci_hcd *xhci, struct xhci_ring *ring, bool consumer while (last_trb(xhci, ring, ring->enq_seg, next)) { if (!consumer) { if (ring != xhci->event_ring) { - if (chain) { - next->link.control |= TRB_CHAIN; - - /* Give this link TRB to the hardware */ - wmb(); - next->link.control ^= TRB_CYCLE; - } else { + /* + * If the caller doesn't plan on enqueueing more + * TDs before ringing the doorbell, then we + * don't want to give the link TRB to the + * hardware just yet. We'll give the link TRB + * back in prepare_ring() just before we enqueue + * the TD at the top of the ring. + */ + if (!chain && !more_trbs_coming) break; + + /* If we're not dealing with 0.95 hardware, + * carry over the chain bit of the previous TRB + * (which may mean the chain bit is cleared). + */ + if (!xhci_link_trb_quirk(xhci)) { + next->link.control &= ~TRB_CHAIN; + next->link.control |= chain; } + /* Give this link TRB to the hardware */ + wmb(); + next->link.control ^= TRB_CYCLE; } /* Toggle the cycle bit after the last ring segment. */ if (last_trb_on_last_seg(xhci, ring, ring->enq_seg, next)) { @@ -1707,9 +1724,12 @@ void xhci_handle_event(struct xhci_hcd *xhci) /* * Generic function for queueing a TRB on a ring. * The caller must have checked to make sure there's room on the ring. + * + * @more_trbs_coming: Will you enqueue more TRBs before calling + * prepare_transfer()? */ static void queue_trb(struct xhci_hcd *xhci, struct xhci_ring *ring, - bool consumer, + bool consumer, bool more_trbs_coming, u32 field1, u32 field2, u32 field3, u32 field4) { struct xhci_generic_trb *trb; @@ -1719,7 +1739,7 @@ static void queue_trb(struct xhci_hcd *xhci, struct xhci_ring *ring, trb->field[1] = field2; trb->field[2] = field3; trb->field[3] = field4; - inc_enq(xhci, ring, consumer); + inc_enq(xhci, ring, consumer, more_trbs_coming); } /* @@ -1988,6 +2008,7 @@ static int queue_bulk_sg_tx(struct xhci_hcd *xhci, gfp_t mem_flags, int trb_buff_len, this_sg_len, running_total; bool first_trb; u64 addr; + bool more_trbs_coming; struct xhci_generic_trb *start_trb; int start_cycle; @@ -2073,7 +2094,11 @@ static int queue_bulk_sg_tx(struct xhci_hcd *xhci, gfp_t mem_flags, length_field = TRB_LEN(trb_buff_len) | remainder | TRB_INTR_TARGET(0); - queue_trb(xhci, ep_ring, false, + if (num_trbs > 1) + more_trbs_coming = true; + else + more_trbs_coming = false; + queue_trb(xhci, ep_ring, false, more_trbs_coming, lower_32_bits(addr), upper_32_bits(addr), length_field, @@ -2124,6 +2149,7 @@ int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags, int num_trbs; struct xhci_generic_trb *start_trb; bool first_trb; + bool more_trbs_coming; int start_cycle; u32 field, length_field; @@ -2212,7 +2238,11 @@ int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags, length_field = TRB_LEN(trb_buff_len) | remainder | TRB_INTR_TARGET(0); - queue_trb(xhci, ep_ring, false, + if (num_trbs > 1) + more_trbs_coming = true; + else + more_trbs_coming = false; + queue_trb(xhci, ep_ring, false, more_trbs_coming, lower_32_bits(addr), upper_32_bits(addr), length_field, @@ -2291,7 +2321,7 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags, /* Queue setup TRB - see section 6.4.1.2.1 */ /* FIXME better way to translate setup_packet into two u32 fields? */ setup = (struct usb_ctrlrequest *) urb->setup_packet; - queue_trb(xhci, ep_ring, false, + queue_trb(xhci, ep_ring, false, true, /* FIXME endianness is probably going to bite my ass here. */ setup->bRequestType | setup->bRequest << 8 | setup->wValue << 16, setup->wIndex | setup->wLength << 16, @@ -2307,7 +2337,7 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags, if (urb->transfer_buffer_length > 0) { if (setup->bRequestType & USB_DIR_IN) field |= TRB_DIR_IN; - queue_trb(xhci, ep_ring, false, + queue_trb(xhci, ep_ring, false, true, lower_32_bits(urb->transfer_dma), upper_32_bits(urb->transfer_dma), length_field, @@ -2324,7 +2354,7 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags, field = 0; else field = TRB_DIR_IN; - queue_trb(xhci, ep_ring, false, + queue_trb(xhci, ep_ring, false, false, 0, 0, TRB_INTR_TARGET(0), @@ -2361,7 +2391,7 @@ static int queue_command(struct xhci_hcd *xhci, u32 field1, u32 field2, "unfailable commands failed.\n"); return -ENOMEM; } - queue_trb(xhci, xhci->cmd_ring, false, field1, field2, field3, + queue_trb(xhci, xhci->cmd_ring, false, false, field1, field2, field3, field4 | xhci->cmd_ring->cycle_state); return 0; } diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index fad70bc8355..3b795c56221 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -219,8 +219,8 @@ static int musb_ulpi_write(struct otg_transceiver *otg, return 0; } #else -#define musb_ulpi_read(a, b) NULL -#define musb_ulpi_write(a, b, c) NULL +#define musb_ulpi_read NULL +#define musb_ulpi_write NULL #endif static struct otg_io_access_ops musb_ulpi_access = { @@ -451,10 +451,6 @@ void musb_hnp_stop(struct musb *musb) * @param power */ -#define STAGE0_MASK (MUSB_INTR_RESUME | MUSB_INTR_SESSREQ \ - | MUSB_INTR_VBUSERROR | MUSB_INTR_CONNECT \ - | MUSB_INTR_RESET) - static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb, u8 devctl, u8 power) { @@ -642,7 +638,7 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb, handled = IRQ_HANDLED; } - +#endif if (int_usb & MUSB_INTR_SUSPEND) { DBG(1, "SUSPEND (%s) devctl %02x power %02x\n", otg_state_string(musb), devctl, power); @@ -705,6 +701,7 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb, } } +#ifdef CONFIG_USB_MUSB_HDRC_HCD if (int_usb & MUSB_INTR_CONNECT) { struct usb_hcd *hcd = musb_to_hcd(musb); void __iomem *mbase = musb->mregs; @@ -1597,7 +1594,7 @@ irqreturn_t musb_interrupt(struct musb *musb) /* the core can interrupt us for multiple reasons; docs have * a generic interrupt flowchart to follow */ - if (musb->int_usb & STAGE0_MASK) + if (musb->int_usb) retval |= musb_stage0_irq(musb, musb->int_usb, devctl, power); diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h index b22d02dea7d..91d67794e35 100644 --- a/drivers/usb/musb/musb_core.h +++ b/drivers/usb/musb/musb_core.h @@ -470,7 +470,8 @@ struct musb_csr_regs { struct musb_context_registers { -#ifdef CONFIG_PM +#if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3) || \ + defined(CONFIG_ARCH_OMAP4) u32 otg_sysconfig, otg_forcestandby; #endif u8 power; @@ -484,7 +485,8 @@ struct musb_context_registers { struct musb_csr_regs index_regs[MUSB_C_NUM_EPS]; }; -#ifdef CONFIG_PM +#if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3) || \ + defined(CONFIG_ARCH_OMAP4) extern void musb_platform_save_context(struct musb *musb, struct musb_context_registers *musb_context); extern void musb_platform_restore_context(struct musb *musb, diff --git a/drivers/usb/musb/musbhsdma.c b/drivers/usb/musb/musbhsdma.c index 1008044a3bb..dc66e4376d4 100644 --- a/drivers/usb/musb/musbhsdma.c +++ b/drivers/usb/musb/musbhsdma.c @@ -132,18 +132,9 @@ static void configure_channel(struct dma_channel *channel, if (mode) { csr |= 1 << MUSB_HSDMA_MODE1_SHIFT; BUG_ON(len < packet_sz); - - if (packet_sz >= 64) { - csr |= MUSB_HSDMA_BURSTMODE_INCR16 - << MUSB_HSDMA_BURSTMODE_SHIFT; - } else if (packet_sz >= 32) { - csr |= MUSB_HSDMA_BURSTMODE_INCR8 - << MUSB_HSDMA_BURSTMODE_SHIFT; - } else if (packet_sz >= 16) { - csr |= MUSB_HSDMA_BURSTMODE_INCR4 - << MUSB_HSDMA_BURSTMODE_SHIFT; - } } + csr |= MUSB_HSDMA_BURSTMODE_INCR16 + << MUSB_HSDMA_BURSTMODE_SHIFT; csr |= (musb_channel->epnum << MUSB_HSDMA_ENDPOINT_SHIFT) | (1 << MUSB_HSDMA_ENABLE_SHIFT) diff --git a/drivers/usb/otg/ulpi.c b/drivers/usb/otg/ulpi.c index b1b34693294..d331b222ad2 100644 --- a/drivers/usb/otg/ulpi.c +++ b/drivers/usb/otg/ulpi.c @@ -59,12 +59,17 @@ static int ulpi_set_flags(struct otg_transceiver *otg) static int ulpi_init(struct otg_transceiver *otg) { - int i, vid, pid; - - vid = (otg_io_read(otg, ULPI_VENDOR_ID_HIGH) << 8) | - otg_io_read(otg, ULPI_VENDOR_ID_LOW); - pid = (otg_io_read(otg, ULPI_PRODUCT_ID_HIGH) << 8) | - otg_io_read(otg, ULPI_PRODUCT_ID_LOW); + int i, vid, pid, ret; + u32 ulpi_id = 0; + + for (i = 0; i < 4; i++) { + ret = otg_io_read(otg, ULPI_PRODUCT_ID_HIGH - i); + if (ret < 0) + return ret; + ulpi_id = (ulpi_id << 8) | ret; + } + vid = ulpi_id & 0xffff; + pid = ulpi_id >> 16; pr_info("ULPI transceiver vendor/product ID 0x%04x/0x%04x\n", vid, pid); diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 79dd1ae195e..da7e334b040 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -653,7 +653,6 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(EVOLUTION_VID, EVOLUTION_ER1_PID) }, { USB_DEVICE(EVOLUTION_VID, EVO_HYBRID_PID) }, { USB_DEVICE(EVOLUTION_VID, EVO_RCM4_PID) }, - { USB_DEVICE(CONTEC_VID, CONTEC_COM1USBH_PID) }, { USB_DEVICE(FTDI_VID, FTDI_ARTEMIS_PID) }, { USB_DEVICE(FTDI_VID, FTDI_ATIK_ATK16_PID) }, { USB_DEVICE(FTDI_VID, FTDI_ATIK_ATK16C_PID) }, diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h index 94d86c3febc..bbc159a1df4 100644 --- a/drivers/usb/serial/ftdi_sio_ids.h +++ b/drivers/usb/serial/ftdi_sio_ids.h @@ -501,13 +501,6 @@ #define CONTEC_COM1USBH_PID 0x8311 /* COM-1(USB)H */ /* - * Contec products (http://www.contec.com) - * Submitted by Daniel Sangorrin - */ -#define CONTEC_VID 0x06CE /* Vendor ID */ -#define CONTEC_COM1USBH_PID 0x8311 /* COM-1(USB)H */ - -/* * Definitions for B&B Electronics products. */ #define BANDB_VID 0x0856 /* B&B Electronics Vendor ID */ diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c index 04bb759536b..93d72eb8caf 100644 --- a/drivers/usb/serial/qcserial.c +++ b/drivers/usb/serial/qcserial.c @@ -139,6 +139,7 @@ static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id) "Could not set interface, error %d\n", retval); retval = -ENODEV; + kfree(data); } return retval; } @@ -155,6 +156,7 @@ static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id) "Could not set interface, error %d\n", retval); retval = -ENODEV; + kfree(data); } return retval; } @@ -163,6 +165,7 @@ static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id) default: dev_err(&serial->dev->dev, "unknown number of interfaces: %d\n", nintf); + kfree(data); return -ENODEV; } diff --git a/drivers/video/geode/gxfb_core.c b/drivers/video/geode/gxfb_core.c index 76e7dac6f25..70b1d9d51c9 100644 --- a/drivers/video/geode/gxfb_core.c +++ b/drivers/video/geode/gxfb_core.c @@ -40,7 +40,7 @@ static int vram; static int vt_switch; /* Modes relevant to the GX (taken from modedb.c) */ -static struct fb_videomode gx_modedb[] __initdata = { +static struct fb_videomode gx_modedb[] __devinitdata = { /* 640x480-60 VESA */ { NULL, 60, 640, 480, 39682, 48, 16, 33, 10, 96, 2, 0, FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA }, @@ -110,14 +110,15 @@ static struct fb_videomode gx_modedb[] __initdata = { #ifdef CONFIG_OLPC #include <asm/olpc.h> -static struct fb_videomode gx_dcon_modedb[] __initdata = { +static struct fb_videomode gx_dcon_modedb[] __devinitdata = { /* The only mode the DCON has is 1200x900 */ { NULL, 50, 1200, 900, 17460, 24, 8, 4, 5, 8, 3, FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, FB_VMODE_NONINTERLACED, 0 } }; -static void __init get_modedb(struct fb_videomode **modedb, unsigned int *size) +static void __devinit get_modedb(struct fb_videomode **modedb, + unsigned int *size) { if (olpc_has_dcon()) { *modedb = (struct fb_videomode *) gx_dcon_modedb; @@ -129,7 +130,8 @@ static void __init get_modedb(struct fb_videomode **modedb, unsigned int *size) } #else -static void __init get_modedb(struct fb_videomode **modedb, unsigned int *size) +static void __devinit get_modedb(struct fb_videomode **modedb, + unsigned int *size) { *modedb = (struct fb_videomode *) gx_modedb; *size = ARRAY_SIZE(gx_modedb); @@ -226,7 +228,8 @@ static int gxfb_blank(int blank_mode, struct fb_info *info) return gx_blank_display(info, blank_mode); } -static int __init gxfb_map_video_memory(struct fb_info *info, struct pci_dev *dev) +static int __devinit gxfb_map_video_memory(struct fb_info *info, + struct pci_dev *dev) { struct gxfb_par *par = info->par; int ret; @@ -290,7 +293,7 @@ static struct fb_ops gxfb_ops = { .fb_imageblit = cfb_imageblit, }; -static struct fb_info * __init gxfb_init_fbinfo(struct device *dev) +static struct fb_info *__devinit gxfb_init_fbinfo(struct device *dev) { struct gxfb_par *par; struct fb_info *info; @@ -371,7 +374,8 @@ static int gxfb_resume(struct pci_dev *pdev) } #endif -static int __init gxfb_probe(struct pci_dev *pdev, const struct pci_device_id *id) +static int __devinit gxfb_probe(struct pci_dev *pdev, + const struct pci_device_id *id) { struct gxfb_par *par; struct fb_info *info; @@ -451,7 +455,7 @@ static int __init gxfb_probe(struct pci_dev *pdev, const struct pci_device_id *i return ret; } -static void gxfb_remove(struct pci_dev *pdev) +static void __devexit gxfb_remove(struct pci_dev *pdev) { struct fb_info *info = pci_get_drvdata(pdev); struct gxfb_par *par = info->par; diff --git a/drivers/video/geode/lxfb_core.c b/drivers/video/geode/lxfb_core.c index 1a18da86d3f..39bdbedf43b 100644 --- a/drivers/video/geode/lxfb_core.c +++ b/drivers/video/geode/lxfb_core.c @@ -35,7 +35,7 @@ static int vt_switch; * we try to make it something sane - 640x480-60 is sane */ -static struct fb_videomode geode_modedb[] __initdata = { +static struct fb_videomode geode_modedb[] __devinitdata = { /* 640x480-60 */ { NULL, 60, 640, 480, 39682, 48, 8, 25, 2, 88, 2, FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, @@ -219,14 +219,15 @@ static struct fb_videomode geode_modedb[] __initdata = { #ifdef CONFIG_OLPC #include <asm/olpc.h> -static struct fb_videomode olpc_dcon_modedb[] __initdata = { +static struct fb_videomode olpc_dcon_modedb[] __devinitdata = { /* The only mode the DCON has is 1200x900 */ { NULL, 50, 1200, 900, 17460, 24, 8, 4, 5, 8, 3, FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, FB_VMODE_NONINTERLACED, 0 } }; -static void __init get_modedb(struct fb_videomode **modedb, unsigned int *size) +static void __devinit get_modedb(struct fb_videomode **modedb, + unsigned int *size) { if (olpc_has_dcon()) { *modedb = (struct fb_videomode *) olpc_dcon_modedb; @@ -238,7 +239,8 @@ static void __init get_modedb(struct fb_videomode **modedb, unsigned int *size) } #else -static void __init get_modedb(struct fb_videomode **modedb, unsigned int *size) +static void __devinit get_modedb(struct fb_videomode **modedb, + unsigned int *size) { *modedb = (struct fb_videomode *) geode_modedb; *size = ARRAY_SIZE(geode_modedb); @@ -334,7 +336,7 @@ static int lxfb_blank(int blank_mode, struct fb_info *info) } -static int __init lxfb_map_video_memory(struct fb_info *info, +static int __devinit lxfb_map_video_memory(struct fb_info *info, struct pci_dev *dev) { struct lxfb_par *par = info->par; @@ -412,7 +414,7 @@ static struct fb_ops lxfb_ops = { .fb_imageblit = cfb_imageblit, }; -static struct fb_info * __init lxfb_init_fbinfo(struct device *dev) +static struct fb_info * __devinit lxfb_init_fbinfo(struct device *dev) { struct lxfb_par *par; struct fb_info *info; @@ -496,7 +498,7 @@ static int lxfb_resume(struct pci_dev *pdev) #define lxfb_resume NULL #endif -static int __init lxfb_probe(struct pci_dev *pdev, +static int __devinit lxfb_probe(struct pci_dev *pdev, const struct pci_device_id *id) { struct lxfb_par *par; @@ -588,7 +590,7 @@ err: return ret; } -static void lxfb_remove(struct pci_dev *pdev) +static void __devexit lxfb_remove(struct pci_dev *pdev) { struct fb_info *info = pci_get_drvdata(pdev); struct lxfb_par *par = info->par; diff --git a/drivers/video/nuc900fb.c b/drivers/video/nuc900fb.c index d4cde79ea15..81687ed26ba 100644 --- a/drivers/video/nuc900fb.c +++ b/drivers/video/nuc900fb.c @@ -596,8 +596,6 @@ static int __devinit nuc900fb_probe(struct platform_device *pdev) goto release_regs; } - nuc900_driver_clksrc_div(&pdev->dev, "ext", 0x2); - fbi->clk = clk_get(&pdev->dev, NULL); if (!fbi->clk || IS_ERR(fbi->clk)) { printk(KERN_ERR "nuc900-lcd:failed to get lcd clock source\n"); |