summaryrefslogtreecommitdiffstats
path: root/drivers
diff options
context:
space:
mode:
Diffstat (limited to 'drivers')
-rw-r--r--drivers/atm/lanai.c2
-rw-r--r--drivers/block/umem.c5
-rw-r--r--drivers/net/forcedeth.c3
-rw-r--r--drivers/net/ioc3-eth.c7
-rw-r--r--drivers/net/ns83820.c6
-rw-r--r--drivers/net/wan/wanxl.c4
-rw-r--r--drivers/net/wireless/prism54/islpci_hotplug.c3
-rw-r--r--drivers/scsi/BusLogic.c7
-rw-r--r--drivers/scsi/a100u2w.c3
-rw-r--r--drivers/scsi/aacraid/aachba.c1
-rw-r--r--drivers/scsi/aacraid/linit.c5
-rw-r--r--drivers/scsi/atp870u.c3
-rw-r--r--drivers/scsi/dpt_i2o.c5
-rw-r--r--drivers/scsi/eata.c3
-rw-r--r--drivers/scsi/gdth.c7
-rw-r--r--drivers/scsi/initio.c3
-rw-r--r--drivers/scsi/ips.c5
-rw-r--r--drivers/scsi/megaraid.c7
-rw-r--r--drivers/scsi/nsp32.c3
-rw-r--r--drivers/scsi/qla1280.c5
-rw-r--r--drivers/scsi/qlogicfc.c5
21 files changed, 55 insertions, 37 deletions
diff --git a/drivers/atm/lanai.c b/drivers/atm/lanai.c
index 69f4c7ce9a6..cac09e353be 100644
--- a/drivers/atm/lanai.c
+++ b/drivers/atm/lanai.c
@@ -1972,7 +1972,7 @@ static int __devinit lanai_pci_start(struct lanai_dev *lanai)
"(itf %d): No suitable DMA available.\n", lanai->number);
return -EBUSY;
}
- if (pci_set_consistent_dma_mask(pci, 0xFFFFFFFF) != 0) {
+ if (pci_set_consistent_dma_mask(pci, DMA_32BIT_MASK) != 0) {
printk(KERN_WARNING DEV_LABEL
"(itf %d): No suitable DMA available.\n", lanai->number);
return -EBUSY;
diff --git a/drivers/block/umem.c b/drivers/block/umem.c
index c16e66b9c7a..f7d4c65a7b8 100644
--- a/drivers/block/umem.c
+++ b/drivers/block/umem.c
@@ -50,6 +50,7 @@
#include <linux/timer.h>
#include <linux/pci.h>
#include <linux/slab.h>
+#include <linux/dma-mapping.h>
#include <linux/fcntl.h> /* O_ACCMODE */
#include <linux/hdreg.h> /* HDIO_GETGEO */
@@ -881,8 +882,8 @@ static int __devinit mm_pci_probe(struct pci_dev *dev, const struct pci_device_i
printk(KERN_INFO "Micro Memory(tm) controller #%d found at %02x:%02x (PCI Mem Module (Battery Backup))\n",
card->card_number, dev->bus->number, dev->devfn);
- if (pci_set_dma_mask(dev, 0xffffffffffffffffLL) &&
- pci_set_dma_mask(dev, 0xffffffffLL)) {
+ if (pci_set_dma_mask(dev, DMA_64BIT_MASK) &&
+ pci_set_dma_mask(dev, DMA_32BIT_MASK)) {
printk(KERN_WARNING "MM%d: NO suitable DMA found\n",num_cards);
return -ENOMEM;
}
diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c
index e7fc28b07e5..7627a75f4f7 100644
--- a/drivers/net/forcedeth.c
+++ b/drivers/net/forcedeth.c
@@ -134,6 +134,7 @@
#include <linux/random.h>
#include <linux/init.h>
#include <linux/if_vlan.h>
+#include <linux/dma-mapping.h>
#include <asm/irq.h>
#include <asm/io.h>
@@ -2932,7 +2933,7 @@ static int __devinit nv_probe(struct pci_dev *pci_dev, const struct pci_device_i
if (id->driver_data & DEV_HAS_HIGH_DMA) {
/* packet format 3: supports 40-bit addressing */
np->desc_ver = DESC_VER_3;
- if (pci_set_dma_mask(pci_dev, 0x0000007fffffffffULL)) {
+ if (pci_set_dma_mask(pci_dev, DMA_39BIT_MASK)) {
printk(KERN_INFO "forcedeth: 64-bit DMA failed, using 32-bit addressing for device %s.\n",
pci_name(pci_dev));
} else {
diff --git a/drivers/net/ioc3-eth.c b/drivers/net/ioc3-eth.c
index 9b8295ee06e..ae71ed57c12 100644
--- a/drivers/net/ioc3-eth.c
+++ b/drivers/net/ioc3-eth.c
@@ -44,6 +44,7 @@
#include <linux/ip.h>
#include <linux/tcp.h>
#include <linux/udp.h>
+#include <linux/dma-mapping.h>
#ifdef CONFIG_SERIAL_8250
#include <linux/serial_core.h>
@@ -1195,17 +1196,17 @@ static int ioc3_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
int err, pci_using_dac;
/* Configure DMA attributes. */
- err = pci_set_dma_mask(pdev, 0xffffffffffffffffULL);
+ err = pci_set_dma_mask(pdev, DMA_64BIT_MASK);
if (!err) {
pci_using_dac = 1;
- err = pci_set_consistent_dma_mask(pdev, 0xffffffffffffffffULL);
+ err = pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK);
if (err < 0) {
printk(KERN_ERR "%s: Unable to obtain 64 bit DMA "
"for consistent allocations\n", pci_name(pdev));
goto out;
}
} else {
- err = pci_set_dma_mask(pdev, 0xffffffffULL);
+ err = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
if (err) {
printk(KERN_ERR "%s: No usable DMA configuration, "
"aborting.\n", pci_name(pdev));
diff --git a/drivers/net/ns83820.c b/drivers/net/ns83820.c
index 0fede50abd3..8e9b1a537de 100644
--- a/drivers/net/ns83820.c
+++ b/drivers/net/ns83820.c
@@ -1828,10 +1828,10 @@ static int __devinit ns83820_init_one(struct pci_dev *pci_dev, const struct pci_
int using_dac = 0;
/* See if we can set the dma mask early on; failure is fatal. */
- if (sizeof(dma_addr_t) == 8 &&
- !pci_set_dma_mask(pci_dev, 0xffffffffffffffffULL)) {
+ if (sizeof(dma_addr_t) == 8 &&
+ !pci_set_dma_mask(pci_dev, DMA_64BIT_MASK)) {
using_dac = 1;
- } else if (!pci_set_dma_mask(pci_dev, 0xffffffff)) {
+ } else if (!pci_set_dma_mask(pci_dev, DMA_32BIT_MASK)) {
using_dac = 0;
} else {
printk(KERN_WARNING "ns83820.c: pci_set_dma_mask failed!\n");
diff --git a/drivers/net/wan/wanxl.c b/drivers/net/wan/wanxl.c
index 9d3b51c3ef5..29a756dd979 100644
--- a/drivers/net/wan/wanxl.c
+++ b/drivers/net/wan/wanxl.c
@@ -577,8 +577,8 @@ static int __devinit wanxl_pci_init_one(struct pci_dev *pdev,
We set both dma_mask and consistent_dma_mask to 28 bits
and pray pci_alloc_consistent() will use this info. It should
work on most platforms */
- if (pci_set_consistent_dma_mask(pdev, 0x0FFFFFFF) ||
- pci_set_dma_mask(pdev, 0x0FFFFFFF)) {
+ if (pci_set_consistent_dma_mask(pdev, DMA_28BIT_MASK) ||
+ pci_set_dma_mask(pdev, DMA_28BIT_MASK)) {
printk(KERN_ERR "wanXL: No usable DMA configuration\n");
return -EIO;
}
diff --git a/drivers/net/wireless/prism54/islpci_hotplug.c b/drivers/net/wireless/prism54/islpci_hotplug.c
index b41d666fea3..bfa0cc319a0 100644
--- a/drivers/net/wireless/prism54/islpci_hotplug.c
+++ b/drivers/net/wireless/prism54/islpci_hotplug.c
@@ -22,6 +22,7 @@
#include <linux/pci.h>
#include <linux/delay.h>
#include <linux/init.h> /* For __init, __exit */
+#include <linux/dma-mapping.h>
#include "prismcompat.h"
#include "islpci_dev.h"
@@ -124,7 +125,7 @@ prism54_probe(struct pci_dev *pdev, const struct pci_device_id *id)
}
/* enable PCI DMA */
- if (pci_set_dma_mask(pdev, 0xffffffff)) {
+ if (pci_set_dma_mask(pdev, DMA_32BIT_MASK)) {
printk(KERN_ERR "%s: 32-bit PCI DMA not supported", DRV_NAME);
goto do_pci_disable_device;
}
diff --git a/drivers/scsi/BusLogic.c b/drivers/scsi/BusLogic.c
index 5bf83cbca86..bde3d5834ad 100644
--- a/drivers/scsi/BusLogic.c
+++ b/drivers/scsi/BusLogic.c
@@ -42,6 +42,7 @@
#include <linux/pci.h>
#include <linux/spinlock.h>
#include <linux/jiffies.h>
+#include <linux/dma-mapping.h>
#include <scsi/scsicam.h>
#include <asm/dma.h>
@@ -677,7 +678,7 @@ static int __init BusLogic_InitializeMultiMasterProbeInfo(struct BusLogic_HostAd
if (pci_enable_device(PCI_Device))
continue;
- if (pci_set_dma_mask(PCI_Device, (u64) 0xffffffff))
+ if (pci_set_dma_mask(PCI_Device, DMA_32BIT_MASK ))
continue;
Bus = PCI_Device->bus->number;
@@ -832,7 +833,7 @@ static int __init BusLogic_InitializeMultiMasterProbeInfo(struct BusLogic_HostAd
if (pci_enable_device(PCI_Device))
continue;
- if (pci_set_dma_mask(PCI_Device, (u64) 0xffffffff))
+ if (pci_set_dma_mask(PCI_Device, DMA_32BIT_MASK))
continue;
Bus = PCI_Device->bus->number;
@@ -886,7 +887,7 @@ static int __init BusLogic_InitializeFlashPointProbeInfo(struct BusLogic_HostAda
if (pci_enable_device(PCI_Device))
continue;
- if (pci_set_dma_mask(PCI_Device, (u64) 0xffffffff))
+ if (pci_set_dma_mask(PCI_Device, DMA_32BIT_MASK))
continue;
Bus = PCI_Device->bus->number;
diff --git a/drivers/scsi/a100u2w.c b/drivers/scsi/a100u2w.c
index 9f45ae1745d..3dce21c7873 100644
--- a/drivers/scsi/a100u2w.c
+++ b/drivers/scsi/a100u2w.c
@@ -89,6 +89,7 @@
#include <linux/string.h>
#include <linux/ioport.h>
#include <linux/slab.h>
+#include <linux/dma-mapping.h>
#include <asm/io.h>
#include <asm/irq.h>
@@ -1052,7 +1053,7 @@ static int __devinit inia100_probe_one(struct pci_dev *pdev,
if (pci_enable_device(pdev))
goto out;
- if (pci_set_dma_mask(pdev, 0xffffffffULL)) {
+ if (pci_set_dma_mask(pdev, DMA_32BIT_MASK)) {
printk(KERN_WARNING "Unable to set 32bit DMA "
"on inia100 adapter, ignoring.\n");
goto out_disable_device;
diff --git a/drivers/scsi/aacraid/aachba.c b/drivers/scsi/aacraid/aachba.c
index a16f8ded8f1..8df4a0ea376 100644
--- a/drivers/scsi/aacraid/aachba.c
+++ b/drivers/scsi/aacraid/aachba.c
@@ -32,6 +32,7 @@
#include <linux/slab.h>
#include <linux/completion.h>
#include <linux/blkdev.h>
+#include <linux/dma-mapping.h>
#include <asm/semaphore.h>
#include <asm/uaccess.h>
diff --git a/drivers/scsi/aacraid/linit.c b/drivers/scsi/aacraid/linit.c
index c2596335549..72033077864 100644
--- a/drivers/scsi/aacraid/linit.c
+++ b/drivers/scsi/aacraid/linit.c
@@ -45,6 +45,7 @@
#include <linux/pci.h>
#include <linux/slab.h>
#include <linux/spinlock.h>
+#include <linux/dma-mapping.h>
#include <linux/syscalls.h>
#include <linux/delay.h>
#include <linux/smp_lock.h>
@@ -806,8 +807,8 @@ static int __devinit aac_probe_one(struct pci_dev *pdev,
* to driver communication memory to be allocated below 2gig
*/
if (aac_drivers[index].quirks & AAC_QUIRK_31BIT)
- if (pci_set_dma_mask(pdev, 0x7FFFFFFFULL) ||
- pci_set_consistent_dma_mask(pdev, 0x7FFFFFFFULL))
+ if (pci_set_dma_mask(pdev, DMA_31BIT_MASK) ||
+ pci_set_consistent_dma_mask(pdev, DMA_31BIT_MASK))
goto out;
pci_set_master(pdev);
diff --git a/drivers/scsi/atp870u.c b/drivers/scsi/atp870u.c
index 5227a779c05..a198d86667e 100644
--- a/drivers/scsi/atp870u.c
+++ b/drivers/scsi/atp870u.c
@@ -28,6 +28,7 @@
#include <linux/spinlock.h>
#include <linux/pci.h>
#include <linux/blkdev.h>
+#include <linux/dma-mapping.h>
#include <asm/system.h>
#include <asm/io.h>
@@ -2631,7 +2632,7 @@ static int atp870u_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
if (pci_enable_device(pdev))
return -EIO;
- if (!pci_set_dma_mask(pdev, 0xFFFFFFFFUL)) {
+ if (!pci_set_dma_mask(pdev, DMA_32BIT_MASK)) {
printk(KERN_INFO "atp870u: use 32bit DMA mask.\n");
} else {
printk(KERN_ERR "atp870u: DMA mask required but not available.\n");
diff --git a/drivers/scsi/dpt_i2o.c b/drivers/scsi/dpt_i2o.c
index 6e6b293dcb2..b1b704a42ef 100644
--- a/drivers/scsi/dpt_i2o.c
+++ b/drivers/scsi/dpt_i2o.c
@@ -57,6 +57,7 @@ MODULE_DESCRIPTION("Adaptec I2O RAID Driver");
#include <linux/reboot.h>
#include <linux/spinlock.h>
#include <linux/smp_lock.h>
+#include <linux/dma-mapping.h>
#include <linux/timer.h>
#include <linux/string.h>
@@ -906,8 +907,8 @@ static int adpt_install_hba(struct scsi_host_template* sht, struct pci_dev* pDev
}
pci_set_master(pDev);
- if (pci_set_dma_mask(pDev, 0xffffffffffffffffULL) &&
- pci_set_dma_mask(pDev, 0xffffffffULL))
+ if (pci_set_dma_mask(pDev, DMA_64BIT_MASK) &&
+ pci_set_dma_mask(pDev, DMA_32BIT_MASK))
return -EINVAL;
base_addr0_phys = pci_resource_start(pDev,0);
diff --git a/drivers/scsi/eata.c b/drivers/scsi/eata.c
index b3f9de8f759..059eeee4b55 100644
--- a/drivers/scsi/eata.c
+++ b/drivers/scsi/eata.c
@@ -490,6 +490,7 @@
#include <linux/init.h>
#include <linux/ctype.h>
#include <linux/spinlock.h>
+#include <linux/dma-mapping.h>
#include <asm/byteorder.h>
#include <asm/dma.h>
#include <asm/io.h>
@@ -1426,7 +1427,7 @@ static int port_detect(unsigned long port_base, unsigned int j,
if (ha->pdev) {
pci_set_master(ha->pdev);
- if (pci_set_dma_mask(ha->pdev, 0xffffffff))
+ if (pci_set_dma_mask(ha->pdev, DMA_32BIT_MASK))
printk("%s: warning, pci_set_dma_mask failed.\n",
ha->board_name);
}
diff --git a/drivers/scsi/gdth.c b/drivers/scsi/gdth.c
index 7f7013e80a8..d5740bbdef3 100644
--- a/drivers/scsi/gdth.c
+++ b/drivers/scsi/gdth.c
@@ -388,6 +388,7 @@
#include <linux/proc_fs.h>
#include <linux/time.h>
#include <linux/timer.h>
+#include <linux/dma-mapping.h>
#ifdef GDTH_RTC
#include <linux/mc146818rtc.h>
#endif
@@ -4527,15 +4528,15 @@ static int __init gdth_detect(struct scsi_host_template *shtp)
if (!(ha->cache_feat & ha->raw_feat & ha->screen_feat &GDT_64BIT)||
/* 64-bit DMA only supported from FW >= x.43 */
(!ha->dma64_support)) {
- if (pci_set_dma_mask(pcistr[ctr].pdev, 0xffffffff)) {
+ if (pci_set_dma_mask(pcistr[ctr].pdev, DMA_32BIT_MASK)) {
printk(KERN_WARNING "GDT-PCI %d: Unable to set 32-bit DMA\n", hanum);
err = TRUE;
}
} else {
shp->max_cmd_len = 16;
- if (!pci_set_dma_mask(pcistr[ctr].pdev, 0xffffffffffffffffULL)) {
+ if (!pci_set_dma_mask(pcistr[ctr].pdev, DMA_64BIT_MASK)) {
printk("GDT-PCI %d: 64-bit DMA enabled\n", hanum);
- } else if (pci_set_dma_mask(pcistr[ctr].pdev, 0xffffffff)) {
+ } else if (pci_set_dma_mask(pcistr[ctr].pdev, DMA_32BIT_MASK)) {
printk(KERN_WARNING "GDT-PCI %d: Unable to set 64/32-bit DMA\n", hanum);
err = TRUE;
}
diff --git a/drivers/scsi/initio.c b/drivers/scsi/initio.c
index ea6f3c0e05d..0cc7f65b584 100644
--- a/drivers/scsi/initio.c
+++ b/drivers/scsi/initio.c
@@ -127,6 +127,7 @@
#include <linux/sched.h>
#include <linux/slab.h>
#include <linux/jiffies.h>
+#include <linux/dma-mapping.h>
#include <asm/io.h>
#include <scsi/scsi.h>
@@ -2780,7 +2781,7 @@ static int tul_NewReturnNumberOfAdapters(void)
if (((dRegValue & 0xFF00) >> 8) == 0xFF)
dRegValue = 0;
wBIOS = (wBIOS << 8) + ((UWORD) ((dRegValue & 0xFF00) >> 8));
- if (pci_set_dma_mask(pDev, 0xffffffff)) {
+ if (pci_set_dma_mask(pDev, DMA_32BIT_MASK)) {
printk(KERN_WARNING
"i91u: Could not set 32 bit DMA mask\n");
continue;
diff --git a/drivers/scsi/ips.c b/drivers/scsi/ips.c
index 481708d527a..a4c0b04cfdb 100644
--- a/drivers/scsi/ips.c
+++ b/drivers/scsi/ips.c
@@ -179,6 +179,7 @@
#include <linux/blkdev.h>
#include <linux/types.h>
+#include <linux/dma-mapping.h>
#include <scsi/sg.h>
@@ -7284,10 +7285,10 @@ ips_init_phase1(struct pci_dev *pci_dev, int *indexPtr)
* are guaranteed to be < 4G.
*/
if (IPS_ENABLE_DMA64 && IPS_HAS_ENH_SGLIST(ha) &&
- !pci_set_dma_mask(ha->pcidev, 0xffffffffffffffffULL)) {
+ !pci_set_dma_mask(ha->pcidev, DMA_64BIT_MASK)) {
(ha)->flags |= IPS_HA_ENH_SG;
} else {
- if (pci_set_dma_mask(ha->pcidev, 0xffffffffULL) != 0) {
+ if (pci_set_dma_mask(ha->pcidev, DMA_32BIT_MASK) != 0) {
printk(KERN_WARNING "Unable to set DMA Mask\n");
return ips_abort_init(ha, index);
}
diff --git a/drivers/scsi/megaraid.c b/drivers/scsi/megaraid.c
index 7144674bc8e..80b68a2481b 100644
--- a/drivers/scsi/megaraid.c
+++ b/drivers/scsi/megaraid.c
@@ -45,6 +45,7 @@
#include <linux/interrupt.h>
#include <linux/pci.h>
#include <linux/init.h>
+#include <linux/dma-mapping.h>
#include <scsi/scsicam.h>
#include "scsi.h"
@@ -2094,7 +2095,7 @@ make_local_pdev(adapter_t *adapter, struct pci_dev **pdev)
memcpy(*pdev, adapter->dev, sizeof(struct pci_dev));
- if( pci_set_dma_mask(*pdev, 0xffffffff) != 0 ) {
+ if( pci_set_dma_mask(*pdev, DMA_32BIT_MASK) != 0 ) {
kfree(*pdev);
return -1;
}
@@ -4859,10 +4860,10 @@ megaraid_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
/* Set the Mode of addressing to 64 bit if we can */
if ((adapter->flag & BOARD_64BIT) && (sizeof(dma_addr_t) == 8)) {
- pci_set_dma_mask(pdev, 0xffffffffffffffffULL);
+ pci_set_dma_mask(pdev, DMA_64BIT_MASK);
adapter->has_64bit_addr = 1;
} else {
- pci_set_dma_mask(pdev, 0xffffffff);
+ pci_set_dma_mask(pdev, DMA_32BIT_MASK);
adapter->has_64bit_addr = 0;
}
diff --git a/drivers/scsi/nsp32.c b/drivers/scsi/nsp32.c
index a279ebb6144..30ee0ef4b45 100644
--- a/drivers/scsi/nsp32.c
+++ b/drivers/scsi/nsp32.c
@@ -38,6 +38,7 @@
#include <linux/pci.h>
#include <linux/delay.h>
#include <linux/ctype.h>
+#include <linux/dma-mapping.h>
#include <asm/dma.h>
#include <asm/system.h>
@@ -2776,7 +2777,7 @@ static int nsp32_detect(struct scsi_host_template *sht)
/*
* setup DMA
*/
- if (pci_set_dma_mask(PCIDEV, 0xffffffffUL) != 0) {
+ if (pci_set_dma_mask(PCIDEV, DMA_32BIT_MASK) != 0) {
nsp32_msg (KERN_ERR, "failed to set PCI DMA mask");
goto scsi_unregister;
}
diff --git a/drivers/scsi/qla1280.c b/drivers/scsi/qla1280.c
index e0230249fa0..5a48e55f941 100644
--- a/drivers/scsi/qla1280.c
+++ b/drivers/scsi/qla1280.c
@@ -350,6 +350,7 @@
#include <linux/pci_ids.h>
#include <linux/interrupt.h>
#include <linux/init.h>
+#include <linux/dma-mapping.h>
#include <asm/io.h>
#include <asm/irq.h>
@@ -4321,7 +4322,7 @@ qla1280_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
#ifdef QLA_64BIT_PTR
if (pci_set_dma_mask(ha->pdev, (dma_addr_t) ~ 0ULL)) {
- if (pci_set_dma_mask(ha->pdev, 0xffffffff)) {
+ if (pci_set_dma_mask(ha->pdev, DMA_32BIT_MASK)) {
printk(KERN_WARNING "scsi(%li): Unable to set a "
"suitable DMA mask - aborting\n", ha->host_no);
error = -ENODEV;
@@ -4331,7 +4332,7 @@ qla1280_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
dprintk(2, "scsi(%li): 64 Bit PCI Addressing Enabled\n",
ha->host_no);
#else
- if (pci_set_dma_mask(ha->pdev, 0xffffffff)) {
+ if (pci_set_dma_mask(ha->pdev, DMA_32BIT_MASK)) {
printk(KERN_WARNING "scsi(%li): Unable to set a "
"suitable DMA mask - aborting\n", ha->host_no);
error = -ENODEV;
diff --git a/drivers/scsi/qlogicfc.c b/drivers/scsi/qlogicfc.c
index 5b15998c71a..52b224a5d6f 100644
--- a/drivers/scsi/qlogicfc.c
+++ b/drivers/scsi/qlogicfc.c
@@ -61,6 +61,7 @@
#include <linux/unistd.h>
#include <linux/spinlock.h>
#include <linux/interrupt.h>
+#include <linux/dma-mapping.h>
#include <linux/jiffies.h>
#include <asm/io.h>
#include <asm/irq.h>
@@ -738,8 +739,8 @@ static int isp2x00_detect(struct scsi_host_template * tmpt)
continue;
/* Try to configure DMA attributes. */
- if (pci_set_dma_mask(pdev, 0xffffffffffffffffULL) &&
- pci_set_dma_mask(pdev, 0xffffffffULL))
+ if (pci_set_dma_mask(pdev, DMA_64BIT_MASK) &&
+ pci_set_dma_mask(pdev, DMA_32BIT_MASK))
continue;
host = scsi_register(tmpt, sizeof(struct isp2x00_hostdata));
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-01 22:38:07 +0000