diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/net/phy/Kconfig | 5 | ||||
| -rw-r--r-- | drivers/net/phy/Makefile | 1 | ||||
| -rw-r--r-- | drivers/net/phy/et1011c.c | 113 |
3 files changed, 119 insertions, 0 deletions
diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig index 0b368dc49ae..de9cf5136fd 100644 --- a/drivers/net/phy/Kconfig +++ b/drivers/net/phy/Kconfig @@ -77,6 +77,11 @@ config STE10XP ---help--- This is the driver for the STe100p and STe101p PHYs. +config LSI_ET1011C_PHY + tristate "Driver for LSI ET1011C PHY" + ---help--- + Supports the LSI ET1011C PHY. + config FIXED_PHY bool "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs" depends on PHYLIB=y diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile index 67959c9d4ca..3a1bfefefbc 100644 --- a/drivers/net/phy/Makefile +++ b/drivers/net/phy/Makefile @@ -13,6 +13,7 @@ obj-$(CONFIG_VITESSE_PHY) += vitesse.o obj-$(CONFIG_BROADCOM_PHY) += broadcom.o obj-$(CONFIG_ICPLUS_PHY) += icplus.o obj-$(CONFIG_REALTEK_PHY) += realtek.o +obj-$(CONFIG_LSI_ET1011C_PHY) += et1011c.o obj-$(CONFIG_FIXED_PHY) += fixed.o obj-$(CONFIG_MDIO_BITBANG) += mdio-bitbang.o obj-$(CONFIG_MDIO_GPIO) += mdio-gpio.o diff --git a/drivers/net/phy/et1011c.c b/drivers/net/phy/et1011c.c new file mode 100644 index 00000000000..b031fa21f1a --- /dev/null +++ b/drivers/net/phy/et1011c.c @@ -0,0 +1,113 @@ +/* + * drivers/net/phy/et1011c.c + * + * Driver for LSI ET1011C PHYs + * + * Author: Chaithrika U S + * + * Copyright (c) 2008 Texas Instruments + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ +#include <linux/kernel.h> +#include <linux/string.h> +#include <linux/errno.h> +#include <linux/unistd.h> +#include <linux/slab.h> +#include <linux/interrupt.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/skbuff.h> +#include <linux/spinlock.h> +#include <linux/mm.h> +#include <linux/module.h> +#include <linux/mii.h> +#include <linux/ethtool.h> +#include <linux/phy.h> +#include <linux/io.h> +#include <linux/uaccess.h> +#include <asm/irq.h> + +#define ET1011C_STATUS_REG (0x1A) +#define ET1011C_CONFIG_REG (0x16) +#define ET1011C_SPEED_MASK (0x0300) +#define ET1011C_GIGABIT_SPEED (0x0200) +#define ET1011C_TX_FIFO_MASK (0x3000) +#define ET1011C_TX_FIFO_DEPTH_8 (0x0000) +#define ET1011C_TX_FIFO_DEPTH_16 (0x1000) +#define ET1011C_INTERFACE_MASK (0x0007) +#define ET1011C_GMII_INTERFACE (0x0002) +#define ET1011C_SYS_CLK_EN (0x01 << 4) + + +MODULE_DESCRIPTION("LSI ET1011C PHY driver"); +MODULE_AUTHOR("Chaithrika U S"); +MODULE_LICENSE("GPL"); + +static int et1011c_config_aneg(struct phy_device *phydev) +{ + int ctl = 0; + ctl = phy_read(phydev, MII_BMCR); + if (ctl < 0) + return ctl; + ctl &= ~(BMCR_FULLDPLX | BMCR_SPEED100 | BMCR_SPEED1000 | + BMCR_ANENABLE); + /* First clear the PHY */ + phy_write(phydev, MII_BMCR, ctl | BMCR_RESET); + + return genphy_config_aneg(phydev); +} + +static int et1011c_read_status(struct phy_device *phydev) +{ + int ret; + u32 val; + static int speed; + ret = genphy_read_status(phydev); + + if (speed != phydev->speed) { + speed = phydev->speed; + val = phy_read(phydev, ET1011C_STATUS_REG); + if ((val & ET1011C_SPEED_MASK) == + ET1011C_GIGABIT_SPEED) { + val = phy_read(phydev, ET1011C_CONFIG_REG); + val &= ~ET1011C_TX_FIFO_MASK; + phy_write(phydev, ET1011C_CONFIG_REG, val\ + | ET1011C_GMII_INTERFACE\ + | ET1011C_SYS_CLK_EN\ + | ET1011C_TX_FIFO_DEPTH_16); + + } + } + return ret; +} + +static struct phy_driver et1011c_driver = { + .phy_id = 0x0282f014, + .name = "ET1011C", + .phy_id_mask = 0xfffffff0, + .features = (PHY_BASIC_FEATURES | SUPPORTED_1000baseT_Full), + .flags = PHY_POLL, + .config_aneg = et1011c_config_aneg, + .read_status = et1011c_read_status, + .driver = { .owner = THIS_MODULE,}, +}; + +static int __init et1011c_init(void) +{ + return phy_driver_register(&et1011c_driver); +} + +static void __exit et1011c_exit(void) +{ + phy_driver_unregister(&et1011c_driver); +} + +module_init(et1011c_init); +module_exit(et1011c_exit); |