summaryrefslogtreecommitdiffstats
path: root/drivers
diff options
context:
space:
mode:
Diffstat (limited to 'drivers')
-rw-r--r--drivers/scsi/sun_esp.c1
-rw-r--r--drivers/serial/sunsu.c8
-rw-r--r--drivers/video/Kconfig26
-rw-r--r--drivers/video/Makefile2
-rw-r--r--drivers/video/sunxvr2500.c277
-rw-r--r--drivers/video/sunxvr500.c443
6 files changed, 753 insertions, 4 deletions
diff --git a/drivers/scsi/sun_esp.c b/drivers/scsi/sun_esp.c
index 8c766bcd109..bbeb2451d32 100644
--- a/drivers/scsi/sun_esp.c
+++ b/drivers/scsi/sun_esp.c
@@ -5,6 +5,7 @@
#include <linux/kernel.h>
#include <linux/types.h>
+#include <linux/delay.h>
#include <linux/module.h>
#include <linux/init.h>
diff --git a/drivers/serial/sunsu.c b/drivers/serial/sunsu.c
index bfd44177a21..2a63cdba320 100644
--- a/drivers/serial/sunsu.c
+++ b/drivers/serial/sunsu.c
@@ -1312,7 +1312,7 @@ static void sunsu_console_write(struct console *co, const char *s,
* - initialize the serial port
* Return non-zero if we didn't find a serial port.
*/
-static int sunsu_console_setup(struct console *co, char *options)
+static int __init sunsu_console_setup(struct console *co, char *options)
{
struct uart_port *port;
int baud = 9600;
@@ -1343,7 +1343,7 @@ static int sunsu_console_setup(struct console *co, char *options)
return uart_set_options(port, co, baud, parity, bits, flow);
}
-static struct console sunsu_cons = {
+static struct console sunsu_console = {
.name = "ttyS",
.write = sunsu_console_write,
.device = uart_console_device,
@@ -1373,9 +1373,9 @@ static inline struct console *SUNSU_CONSOLE(int num_uart)
if (i == num_uart)
return NULL;
- sunsu_cons.index = i;
+ sunsu_console.index = i;
- return &sunsu_cons;
+ return &sunsu_console;
}
#else
#define SUNSU_CONSOLE(num_uart) (NULL)
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 2d89d0e9bcf..344c3759530 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -1383,6 +1383,32 @@ config FB_LEO
This is the frame buffer device driver for the SBUS-based Sun ZX
(leo) frame buffer cards.
+config FB_XVR500
+ bool "Sun XVR-500 3DLABS Wildcat support"
+ depends on FB && PCI && SPARC64
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ This is the framebuffer device for the Sun XVR-500 and similar
+ graphics cards based upon the 3DLABS Wildcat chipset. The driver
+ only works on sparc64 systems where the system firwmare has
+ mostly initialized the card already. It is treated as a
+ completely dumb framebuffer device.
+
+config FB_XVR2500
+ bool "Sun XVR-2500 3DLABS Wildcat support"
+ depends on FB && PCI && SPARC64
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ This is the framebuffer device for the Sun XVR-2500 and similar
+ graphics cards based upon the 3DLABS Wildcat chipset. The driver
+ only works on sparc64 systems where the system firwmare has
+ mostly initialized the card already. It is treated as a
+ completely dumb framebuffer device.
+
config FB_PCI
bool "PCI framebuffers"
depends on (FB = y) && PCI && SPARC
diff --git a/drivers/video/Makefile b/drivers/video/Makefile
index 869351785ee..558473d040d 100644
--- a/drivers/video/Makefile
+++ b/drivers/video/Makefile
@@ -67,6 +67,8 @@ obj-$(CONFIG_FB_ATARI) += atafb.o c2p.o atafb_mfb.o \
atafb_iplan2p2.o atafb_iplan2p4.o atafb_iplan2p8.o
obj-$(CONFIG_FB_MAC) += macfb.o
obj-$(CONFIG_FB_HGA) += hgafb.o
+obj-$(CONFIG_FB_XVR500) += sunxvr500.o
+obj-$(CONFIG_FB_XVR2500) += sunxvr2500.o
obj-$(CONFIG_FB_IGA) += igafb.o
obj-$(CONFIG_FB_APOLLO) += dnfb.o
obj-$(CONFIG_FB_Q40) += q40fb.o
diff --git a/drivers/video/sunxvr2500.c b/drivers/video/sunxvr2500.c
new file mode 100644
index 00000000000..4010492c692
--- /dev/null
+++ b/drivers/video/sunxvr2500.c
@@ -0,0 +1,277 @@
+/* s3d.c: Sun 3DLABS XVR-2500 et al. driver for sparc64 systems
+ *
+ * Copyright (C) 2007 David S. Miller (davem@davemloft.net)
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/fb.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+
+#include <asm/io.h>
+#include <asm/prom.h>
+#include <asm/of_device.h>
+
+struct s3d_info {
+ struct fb_info *info;
+ struct pci_dev *pdev;
+
+ char __iomem *fb_base;
+ unsigned long fb_base_phys;
+
+ struct device_node *of_node;
+
+ unsigned int width;
+ unsigned int height;
+ unsigned int depth;
+ unsigned int fb_size;
+
+ u32 pseudo_palette[256];
+};
+
+static int __devinit s3d_get_props(struct s3d_info *sp)
+{
+ sp->width = of_getintprop_default(sp->of_node, "width", 0);
+ sp->height = of_getintprop_default(sp->of_node, "height", 0);
+ sp->depth = of_getintprop_default(sp->of_node, "depth", 8);
+
+ if (!sp->width || !sp->height) {
+ printk(KERN_ERR "s3d: Critical properties missing for %s\n",
+ pci_name(sp->pdev));
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int s3d_setcolreg(unsigned regno,
+ unsigned red, unsigned green, unsigned blue,
+ unsigned transp, struct fb_info *info)
+{
+ u32 value;
+
+ if (regno >= 256)
+ return 1;
+
+ red >>= 8;
+ green >>= 8;
+ blue >>= 8;
+
+ value = (blue << 24) | (green << 16) | (red << 8);
+ ((u32 *)info->pseudo_palette)[regno] = value;
+
+ return 0;
+}
+
+static struct fb_ops s3d_ops = {
+ .owner = THIS_MODULE,
+ .fb_setcolreg = s3d_setcolreg,
+ .fb_fillrect = cfb_fillrect,
+ .fb_copyarea = cfb_copyarea,
+ .fb_imageblit = cfb_imageblit,
+};
+
+static int __devinit s3d_set_fbinfo(struct s3d_info *sp)
+{
+ struct fb_info *info = sp->info;
+ struct fb_var_screeninfo *var = &info->var;
+
+ info->flags = FBINFO_DEFAULT;
+ info->fbops = &s3d_ops;
+ info->screen_base = sp->fb_base;
+ info->screen_size = sp->fb_size;
+
+ info->pseudo_palette = sp->pseudo_palette;
+
+ /* Fill fix common fields */
+ strlcpy(info->fix.id, "s3d", sizeof(info->fix.id));
+ info->fix.smem_start = sp->fb_base_phys;
+ info->fix.smem_len = sp->fb_size;
+ info->fix.type = FB_TYPE_PACKED_PIXELS;
+ if (sp->depth == 32 || sp->depth == 24)
+ info->fix.visual = FB_VISUAL_TRUECOLOR;
+ else
+ info->fix.visual = FB_VISUAL_PSEUDOCOLOR;
+
+ var->xres = sp->width;
+ var->yres = sp->height;
+ var->xres_virtual = var->xres;
+ var->yres_virtual = var->yres;
+ var->bits_per_pixel = sp->depth;
+
+ var->red.offset = 8;
+ var->red.length = 8;
+ var->green.offset = 16;
+ var->green.length = 8;
+ var->blue.offset = 24;
+ var->blue.length = 8;
+ var->transp.offset = 0;
+ var->transp.length = 0;
+
+ if (fb_alloc_cmap(&info->cmap, 256, 0)) {
+ printk(KERN_ERR "s3d: Cannot allocate color map.\n");
+ return -ENOMEM;
+ }
+
+ return 0;
+}
+
+static int __devinit s3d_pci_register(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
+{
+ struct fb_info *info;
+ struct s3d_info *sp;
+ int err;
+
+ err = pci_enable_device(pdev);
+ if (err < 0) {
+ printk(KERN_ERR "s3d: Cannot enable PCI device %s\n",
+ pci_name(pdev));
+ goto err_out;
+ }
+
+ info = framebuffer_alloc(sizeof(struct s3d_info), &pdev->dev);
+ if (!info) {
+ printk(KERN_ERR "s3d: Cannot allocate fb_info\n");
+ err = -ENOMEM;
+ goto err_disable;
+ }
+
+ sp = info->par;
+ sp->info = info;
+ sp->pdev = pdev;
+ sp->of_node = pci_device_to_OF_node(pdev);
+ if (!sp->of_node) {
+ printk(KERN_ERR "s3d: Cannot find OF node of %s\n",
+ pci_name(pdev));
+ err = -ENODEV;
+ goto err_release_fb;
+ }
+
+ sp->fb_base_phys = pci_resource_start (pdev, 1);
+
+ err = pci_request_region(pdev, 1, "s3d framebuffer");
+ if (err < 0) {
+ printk("s3d: Cannot request region 1 for %s\n",
+ pci_name(pdev));
+ goto err_release_fb;
+ }
+
+ err = s3d_get_props(sp);
+ if (err)
+ goto err_release_pci;
+
+ /* XXX 'linebytes' is often wrong, it is equal to the width
+ * XXX with depth of 32 on my XVR-2500 which is clearly not
+ * XXX right. So we don't try to use it.
+ */
+ switch (sp->depth) {
+ case 8:
+ info->fix.line_length = sp->width;
+ break;
+ case 16:
+ info->fix.line_length = sp->width * 2;
+ break;
+ case 24:
+ info->fix.line_length = sp->width * 3;
+ break;
+ case 32:
+ info->fix.line_length = sp->width * 4;
+ break;
+ }
+ sp->fb_size = info->fix.line_length * sp->height;
+
+ sp->fb_base = ioremap(sp->fb_base_phys, sp->fb_size);
+ if (!sp->fb_base)
+ goto err_release_pci;
+
+ err = s3d_set_fbinfo(sp);
+ if (err)
+ goto err_unmap_fb;
+
+ pci_set_drvdata(pdev, info);
+
+ printk("s3d: Found device at %s\n", pci_name(pdev));
+
+ err = register_framebuffer(info);
+ if (err < 0) {
+ printk(KERN_ERR "s3d: Could not register framebuffer %s\n",
+ pci_name(pdev));
+ goto err_unmap_fb;
+ }
+
+ return 0;
+
+err_unmap_fb:
+ iounmap(sp->fb_base);
+
+err_release_pci:
+ pci_release_region(pdev, 1);
+
+err_release_fb:
+ framebuffer_release(info);
+
+err_disable:
+ pci_disable_device(pdev);
+
+err_out:
+ return err;
+}
+
+static void __devexit s3d_pci_unregister(struct pci_dev *pdev)
+{
+ struct fb_info *info = pci_get_drvdata(pdev);
+ struct s3d_info *sp = info->par;
+
+ unregister_framebuffer(info);
+
+ iounmap(sp->fb_base);
+
+ pci_release_region(pdev, 1);
+
+ framebuffer_release(info);
+
+ pci_disable_device(pdev);
+}
+
+static struct pci_device_id s3d_pci_table[] = {
+ { /* XVR-2500 */
+ PCI_DEVICE(PCI_VENDOR_ID_3DLABS, 0x0032),
+ .driver_data = 1,
+ },
+ { /* XVR-500 */
+ PCI_DEVICE(PCI_VENDOR_ID_3DLABS, 0x07a2),
+ .driver_data = 0,
+ },
+ { 0, }
+};
+
+static struct pci_driver s3d_driver = {
+ .name = "s3d",
+ .id_table = s3d_pci_table,
+ .probe = s3d_pci_register,
+ .remove = __devexit_p(s3d_pci_unregister),
+};
+
+static int __init s3d_init(void)
+{
+ if (fb_get_options("s3d", NULL))
+ return -ENODEV;
+
+ return pci_register_driver(&s3d_driver);
+}
+
+static void __exit s3d_exit(void)
+{
+ pci_unregister_driver(&s3d_driver);
+}
+
+module_init(s3d_init);
+module_exit(s3d_exit);
+
+MODULE_DESCRIPTION("framebuffer driver for Sun XVR-2500 graphics");
+MODULE_AUTHOR("David S. Miller <davem@davemloft.net>");
+MODULE_VERSION("1.0");
+MODULE_LICENSE("GPL");
diff --git a/drivers/video/sunxvr500.c b/drivers/video/sunxvr500.c
new file mode 100644
index 00000000000..08880a62bfa
--- /dev/null
+++ b/drivers/video/sunxvr500.c
@@ -0,0 +1,443 @@
+/* sunxvr500.c: Sun 3DLABS XVR-500 Expert3D driver for sparc64 systems
+ *
+ * Copyright (C) 2007 David S. Miller (davem@davemloft.net)
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/fb.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+
+#include <asm/io.h>
+#include <asm/prom.h>
+#include <asm/of_device.h>
+
+/* XXX This device has a 'dev-comm' property which aparently is
+ * XXX a pointer into the openfirmware's address space which is
+ * XXX a shared area the kernel driver can use to keep OBP
+ * XXX informed about the current resolution setting. The idea
+ * XXX is that the kernel can change resolutions, and as long
+ * XXX as the values in the 'dev-comm' area are accurate then
+ * XXX OBP can still render text properly to the console.
+ * XXX
+ * XXX I'm still working out the layout of this and whether there
+ * XXX are any signatures we need to look for etc.
+ */
+struct e3d_info {
+ struct fb_info *info;
+ struct pci_dev *pdev;
+
+ spinlock_t lock;
+
+ char __iomem *fb_base;
+ unsigned long fb_base_phys;
+
+ unsigned long fb8_buf_diff;
+ unsigned long regs_base_phys;
+
+ void __iomem *ramdac;
+
+ struct device_node *of_node;
+
+ unsigned int width;
+ unsigned int height;
+ unsigned int depth;
+ unsigned int fb_size;
+
+ u32 fb_base_reg;
+ u32 fb8_0_off;
+ u32 fb8_1_off;
+
+ u32 pseudo_palette[256];
+};
+
+static int __devinit e3d_get_props(struct e3d_info *ep)
+{
+ ep->width = of_getintprop_default(ep->of_node, "width", 0);
+ ep->height = of_getintprop_default(ep->of_node, "height", 0);
+ ep->depth = of_getintprop_default(ep->of_node, "depth", 8);
+
+ if (!ep->width || !ep->height) {
+ printk(KERN_ERR "e3d: Critical properties missing for %s\n",
+ pci_name(ep->pdev));
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+/* My XVR-500 comes up, at 1280x768 and a FB base register value of
+ * 0x04000000, the following video layout register values:
+ *
+ * RAMDAC_VID_WH 0x03ff04ff
+ * RAMDAC_VID_CFG 0x1a0b0088
+ * RAMDAC_VID_32FB_0 0x04000000
+ * RAMDAC_VID_32FB_1 0x04800000
+ * RAMDAC_VID_8FB_0 0x05000000
+ * RAMDAC_VID_8FB_1 0x05200000
+ * RAMDAC_VID_XXXFB 0x05400000
+ * RAMDAC_VID_YYYFB 0x05c00000
+ * RAMDAC_VID_ZZZFB 0x05e00000
+ */
+/* Video layout registers */
+#define RAMDAC_VID_WH 0x00000070UL /* (height-1)<<16 | (width-1) */
+#define RAMDAC_VID_CFG 0x00000074UL /* 0x1a000088|(linesz_log2<<16) */
+#define RAMDAC_VID_32FB_0 0x00000078UL /* PCI base 32bpp FB buffer 0 */
+#define RAMDAC_VID_32FB_1 0x0000007cUL /* PCI base 32bpp FB buffer 1 */
+#define RAMDAC_VID_8FB_0 0x00000080UL /* PCI base 8bpp FB buffer 0 */
+#define RAMDAC_VID_8FB_1 0x00000084UL /* PCI base 8bpp FB buffer 1 */
+#define RAMDAC_VID_XXXFB 0x00000088UL /* PCI base of XXX FB */
+#define RAMDAC_VID_YYYFB 0x0000008cUL /* PCI base of YYY FB */
+#define RAMDAC_VID_ZZZFB 0x00000090UL /* PCI base of ZZZ FB */
+
+/* CLUT registers */
+#define RAMDAC_INDEX 0x000000bcUL
+#define RAMDAC_DATA 0x000000c0UL
+
+static void e3d_clut_write(struct e3d_info *ep, int index, u32 val)
+{
+ void __iomem *ramdac = ep->ramdac;
+ unsigned long flags;
+
+ spin_lock_irqsave(&ep->lock, flags);
+
+ writel(index, ramdac + RAMDAC_INDEX);
+ writel(val, ramdac + RAMDAC_DATA);
+
+ spin_unlock_irqrestore(&ep->lock, flags);
+}
+
+static int e3d_setcolreg(unsigned regno,
+ unsigned red, unsigned green, unsigned blue,
+ unsigned transp, struct fb_info *info)
+{
+ struct e3d_info *ep = info->par;
+ u32 red_8, green_8, blue_8;
+ u32 red_10, green_10, blue_10;
+ u32 value;
+
+ if (regno >= 256)
+ return 1;
+
+ red_8 = red >> 8;
+ green_8 = green >> 8;
+ blue_8 = blue >> 8;
+
+ value = (blue_8 << 24) | (green_8 << 16) | (red_8 << 8);
+ ((u32 *)info->pseudo_palette)[regno] = value;
+
+
+ red_10 = red >> 6;
+ green_10 = green >> 6;
+ blue_10 = blue >> 6;
+
+ value = (blue_10 << 20) | (green_10 << 10) | (red_10 << 0);
+ e3d_clut_write(ep, regno, value);
+
+ return 0;
+}
+
+/* XXX This is a bit of a hack. I can't figure out exactly how the
+ * XXX two 8bpp areas of the framebuffer work. I imagine there is
+ * XXX a WID attribute somewhere else in the framebuffer which tells
+ * XXX the ramdac which of the two 8bpp framebuffer regions to take
+ * XXX the pixel from. So, for now, render into both regions to make
+ * XXX sure the pixel shows up.
+ */
+static void e3d_imageblit(struct fb_info *info, const struct fb_image *image)
+{
+ struct e3d_info *ep = info->par;
+ unsigned long flags;
+
+ spin_lock_irqsave(&ep->lock, flags);
+ cfb_imageblit(info, image);
+ info->screen_base += ep->fb8_buf_diff;
+ cfb_imageblit(info, image);
+ info->screen_base -= ep->fb8_buf_diff;
+ spin_unlock_irqrestore(&ep->lock, flags);
+}
+
+static void e3d_fillrect(struct fb_info *info, const struct fb_fillrect *rect)
+{
+ struct e3d_info *ep = info->par;
+ unsigned long flags;
+
+ spin_lock_irqsave(&ep->lock, flags);
+ cfb_fillrect(info, rect);
+ info->screen_base += ep->fb8_buf_diff;
+ cfb_fillrect(info, rect);
+ info->screen_base -= ep->fb8_buf_diff;
+ spin_unlock_irqrestore(&ep->lock, flags);
+}
+
+static void e3d_copyarea(struct fb_info *info, const struct fb_copyarea *area)
+{
+ struct e3d_info *ep = info->par;
+ unsigned long flags;
+
+ spin_lock_irqsave(&ep->lock, flags);
+ cfb_copyarea(info, area);
+ info->screen_base += ep->fb8_buf_diff;
+ cfb_copyarea(info, area);
+ info->screen_base -= ep->fb8_buf_diff;
+ spin_unlock_irqrestore(&ep->lock, flags);
+}
+
+static struct fb_ops e3d_ops = {
+ .owner = THIS_MODULE,
+ .fb_setcolreg = e3d_setcolreg,
+ .fb_fillrect = e3d_fillrect,
+ .fb_copyarea = e3d_copyarea,
+ .fb_imageblit = e3d_imageblit,
+};
+
+static int __devinit e3d_set_fbinfo(struct e3d_info *ep)
+{
+ struct fb_info *info = ep->info;
+ struct fb_var_screeninfo *var = &info->var;
+
+ info->flags = FBINFO_DEFAULT;
+ info->fbops = &e3d_ops;
+ info->screen_base = ep->fb_base;
+ info->screen_size = ep->fb_size;
+
+ info->pseudo_palette = ep->pseudo_palette;
+
+ /* Fill fix common fields */
+ strlcpy(info->fix.id, "e3d", sizeof(info->fix.id));
+ info->fix.smem_start = ep->fb_base_phys;
+ info->fix.smem_len = ep->fb_size;
+ info->fix.type = FB_TYPE_PACKED_PIXELS;
+ if (ep->depth == 32 || ep->depth == 24)
+ info->fix.visual = FB_VISUAL_TRUECOLOR;
+ else
+ info->fix.visual = FB_VISUAL_PSEUDOCOLOR;
+
+ var->xres = ep->width;
+ var->yres = ep->height;
+ var->xres_virtual = var->xres;
+ var->yres_virtual = var->yres;
+ var->bits_per_pixel = ep->depth;
+
+ var->red.offset = 8;
+ var->red.length = 8;
+ var->green.offset = 16;
+ var->green.length = 8;
+ var->blue.offset = 24;
+ var->blue.length = 8;
+ var->transp.offset = 0;
+ var->transp.length = 0;
+
+ if (fb_alloc_cmap(&info->cmap, 256, 0)) {
+ printk(KERN_ERR "e3d: Cannot allocate color map.\n");
+ return -ENOMEM;
+ }
+
+ return 0;
+}
+
+static int __devinit e3d_pci_register(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
+{
+ struct fb_info *info;
+ struct e3d_info *ep;
+ unsigned int line_length;
+ int err;
+
+ err = pci_enable_device(pdev);
+ if (err < 0) {
+ printk(KERN_ERR "e3d: Cannot enable PCI device %s\n",
+ pci_name(pdev));
+ goto err_out;
+ }
+
+ info = framebuffer_alloc(sizeof(struct e3d_info), &pdev->dev);
+ if (!info) {
+ printk(KERN_ERR "e3d: Cannot allocate fb_info\n");
+ err = -ENOMEM;
+ goto err_disable;
+ }
+
+ ep = info->par;
+ ep->info = info;
+ ep->pdev = pdev;
+ spin_lock_init(&ep->lock);
+ ep->of_node = pci_device_to_OF_node(pdev);
+ if (!ep->of_node) {
+ printk(KERN_ERR "e3d: Cannot find OF node of %s\n",
+ pci_name(pdev));
+ err = -ENODEV;
+ goto err_release_fb;
+ }
+
+ /* Read the PCI base register of the frame buffer, which we
+ * need in order to interpret the RAMDAC_VID_*FB* values in
+ * the ramdac correctly.
+ */
+ pci_read_config_dword(pdev, PCI_BASE_ADDRESS_0,
+ &ep->fb_base_reg);
+ ep->fb_base_reg &= PCI_BASE_ADDRESS_MEM_MASK;
+
+ ep->regs_base_phys = pci_resource_start (pdev, 1);
+ err = pci_request_region(pdev, 1, "e3d regs");
+ if (err < 0) {
+ printk("e3d: Cannot request region 1 for %s\n",
+ pci_name(pdev));
+ goto err_release_fb;
+ }
+ ep->ramdac = ioremap(ep->regs_base_phys + 0x8000, 0x1000);
+ if (!ep->ramdac)
+ goto err_release_pci1;
+
+ ep->fb8_0_off = readl(ep->ramdac + RAMDAC_VID_8FB_0);
+ ep->fb8_0_off -= ep->fb_base_reg;
+
+ ep->fb8_1_off = readl(ep->ramdac + RAMDAC_VID_8FB_1);
+ ep->fb8_1_off -= ep->fb_base_reg;
+
+ ep->fb8_buf_diff = ep->fb8_1_off - ep->fb8_0_off;
+
+ ep->fb_base_phys = pci_resource_start (pdev, 0);
+ ep->fb_base_phys += ep->fb8_0_off;
+
+ err = pci_request_region(pdev, 0, "e3d framebuffer");
+ if (err < 0) {
+ printk("e3d: Cannot request region 0 for %s\n",
+ pci_name(pdev));
+ goto err_unmap_ramdac;
+ }
+
+ err = e3d_get_props(ep);
+ if (err)
+ goto err_release_pci0;
+
+ line_length = (readl(ep->ramdac + RAMDAC_VID_CFG) >> 16) & 0xff;
+ line_length = 1 << line_length;
+
+ switch (ep->depth) {
+ case 8:
+ info->fix.line_length = line_length;
+ break;
+ case 16:
+ info->fix.line_length = line_length * 2;
+ break;
+ case 24:
+ info->fix.line_length = line_length * 3;
+ break;
+ case 32:
+ info->fix.line_length = line_length * 4;
+ break;
+ }
+ ep->fb_size = info->fix.line_length * ep->height;
+
+ ep->fb_base = ioremap(ep->fb_base_phys, ep->fb_size);
+ if (!ep->fb_base)
+ goto err_release_pci0;
+
+ err = e3d_set_fbinfo(ep);
+ if (err)
+ goto err_unmap_fb;
+
+ pci_set_drvdata(pdev, info);
+
+ printk("e3d: Found device at %s\n", pci_name(pdev));
+
+ err = register_framebuffer(info);
+ if (err < 0) {
+ printk(KERN_ERR "e3d: Could not register framebuffer %s\n",
+ pci_name(pdev));
+ goto err_unmap_fb;
+ }
+
+ return 0;
+
+err_unmap_fb:
+ iounmap(ep->fb_base);
+
+err_release_pci0:
+ pci_release_region(pdev, 0);
+
+err_unmap_ramdac:
+ iounmap(ep->ramdac);
+
+err_release_pci1:
+ pci_release_region(pdev, 1);
+
+err_release_fb:
+ framebuffer_release(info);
+
+err_disable:
+ pci_disable_device(pdev);
+
+err_out:
+ return err;
+}
+
+static void __devexit e3d_pci_unregister(struct pci_dev *pdev)
+{
+ struct fb_info *info = pci_get_drvdata(pdev);
+ struct e3d_info *ep = info->par;
+
+ unregister_framebuffer(info);
+
+ iounmap(ep->ramdac);
+ iounmap(ep->fb_base);
+
+ pci_release_region(pdev, 0);
+ pci_release_region(pdev, 1);
+
+ framebuffer_release(info);
+
+ pci_disable_device(pdev);
+}
+
+static struct pci_device_id e3d_pci_table[] = {
+ { PCI_DEVICE(PCI_VENDOR_ID_3DLABS, 0x7a0), },
+ { PCI_DEVICE(PCI_VENDOR_ID_3DLABS, 0x7a2), },
+ { .vendor = PCI_VENDOR_ID_3DLABS,
+ .device = PCI_ANY_ID,
+ .subvendor = PCI_VENDOR_ID_3DLABS,
+ .subdevice = 0x0108,
+ },
+ { .vendor = PCI_VENDOR_ID_3DLABS,
+ .device = PCI_ANY_ID,
+ .subvendor = PCI_VENDOR_ID_3DLABS,
+ .subdevice = 0x0140,
+ },
+ { .vendor = PCI_VENDOR_ID_3DLABS,
+ .device = PCI_ANY_ID,
+ .subvendor = PCI_VENDOR_ID_3DLABS,
+ .subdevice = 0x1024,
+ },
+ { 0, }
+};
+
+static struct pci_driver e3d_driver = {
+ .name = "e3d",
+ .id_table = e3d_pci_table,
+ .probe = e3d_pci_register,
+ .remove = __devexit_p(e3d_pci_unregister),
+};
+
+static int __init e3d_init(void)
+{
+ if (fb_get_options("e3d", NULL))
+ return -ENODEV;
+
+ return pci_register_driver(&e3d_driver);
+}
+
+static void __exit e3d_exit(void)
+{
+ pci_unregister_driver(&e3d_driver);
+}
+
+module_init(e3d_init);
+module_exit(e3d_exit);
+
+MODULE_DESCRIPTION("framebuffer driver for Sun XVR-500 graphics");
+MODULE_AUTHOR("David S. Miller <davem@davemloft.net>");
+MODULE_VERSION("1.0");
+MODULE_LICENSE("GPL");
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-02 12:35:01 +0000