diff options
Diffstat (limited to 'fs/cifs/README')
| -rw-r--r-- | fs/cifs/README | 51 |
1 files changed, 37 insertions, 14 deletions
diff --git a/fs/cifs/README b/fs/cifs/README index 4d01697722c..b806b11b556 100644 --- a/fs/cifs/README +++ b/fs/cifs/README @@ -301,10 +301,21 @@ A partial list of the supported mount options follows: during the local client kernel build will be used. If server does not support Unicode, this parameter is unused. - rsize default read size (usually 16K) - wsize default write size (usually 16K, 32K is often better over GigE) - maximum wsize currently allowed by CIFS is 57344 (14 4096 byte - pages) + rsize default read size (usually 16K). The client currently + can not use rsize larger than CIFSMaxBufSize. CIFSMaxBufSize + defaults to 16K and may be changed (from 8K to the maximum + kmalloc size allowed by your kernel) at module install time + for cifs.ko. Setting CIFSMaxBufSize to a very large value + will cause cifs to use more memory and may reduce performance + in some cases. To use rsize greater than 127K (the original + cifs protocol maximum) also requires that the server support + a new Unix Capability flag (for very large read) which some + newer servers (e.g. Samba 3.0.26 or later) do. rsize can be + set from a minimum of 2048 to a maximum of 130048 (127K or + CIFSMaxBufSize, whichever is smaller) + wsize default write size (default 57344) + maximum wsize currently allowed by CIFS is 57344 (fourteen + 4096 byte pages) rw mount the network share read-write (note that the server may still consider the share read-only) ro mount network share read-only @@ -359,7 +370,7 @@ A partial list of the supported mount options follows: Note that this does not affect the normal ACL check on the target machine done by the server software (of the server ACL against the user name provided at mount time). - serverino Use servers inode numbers instead of generating automatically + serverino Use server's inode numbers instead of generating automatically incrementing inode numbers on the client. Although this will make it easier to spot hardlinked files (as they will have the same inode numbers) and inode numbers may be persistent, @@ -367,12 +378,11 @@ A partial list of the supported mount options follows: are unique if multiple server side mounts are exported under a single share (since inode numbers on the servers might not be unique if multiple filesystems are mounted under the same - shared higher level directory). Note that this requires that - the server support the CIFS Unix Extensions as other servers - do not return a unique IndexNumber on SMB FindFirst (most - servers return zero as the IndexNumber). Parameter has no - effect to Windows servers and others which do not support the - CIFS Unix Extensions. + shared higher level directory). Note that some older + (e.g. pre-Windows 2000) do not support returning UniqueIDs + or the CIFS Unix Extensions equivalent and for those + this mount option will have no effect. Exporting cifs mounts + under nfsd requires this mount option on the cifs mount. noserverino Client generates inode numbers (rather than using the actual one from the server) by default. setuids If the CIFS Unix extensions are negotiated with the server @@ -434,6 +444,13 @@ A partial list of the supported mount options follows: noposixpaths If CIFS Unix extensions are supported, do not request posix path name support (this may cause servers to reject creatingfile with certain reserved characters). + nounix Disable the CIFS Unix Extensions for this mount (tree + connection). This is rarely needed, but it may be useful + in order to turn off multiple settings all at once (ie + posix acls, posix locks, posix paths, symlink support + and retrieving uids/gids/mode from the server) or to + work around a bug in server which implement the Unix + Extensions. nobrl Do not send byte range lock requests to the server. This is necessary for certain applications that break with cifs style mandatory byte range locks (and most @@ -441,6 +458,12 @@ A partial list of the supported mount options follows: byte range locks). remount remount the share (often used to change from ro to rw mounts or vice versa) + servern Specify the server 's netbios name (RFC1001 name) to use + when attempting to setup a session to the server. This is + This is needed for mounting to some older servers (such + as OS/2 or Windows 98 and Windows ME) since they do not + support a default server name. A server name can be up + to 15 characters long and is usually uppercased. sfu When the CIFS Unix Extensions are not negotiated, attempt to create device files and fifos in a format compatible with Services for Unix (SFU). In addition retrieve bits 10-12 @@ -582,10 +605,10 @@ the start of smb requests and responses can be enabled via: echo 1 > /proc/fs/cifs/traceSMB -Two other experimental features are under development and to test -require enabling CONFIG_CIFS_EXPERIMENTAL +Two other experimental features are under development. To test these +requires enabling CONFIG_CIFS_EXPERIMENTAL - More efficient write operations + ipv6 enablement DNOTIFY fcntl: needed for support of directory change notification and perhaps later for file leases) |