diff options
Diffstat (limited to 'fs/jbd/journal.c')
| -rw-r--r-- | fs/jbd/journal.c | 206 |
1 files changed, 135 insertions, 71 deletions
diff --git a/fs/jbd/journal.c b/fs/jbd/journal.c index 0971e921780..425c2f2cf17 100644 --- a/fs/jbd/journal.c +++ b/fs/jbd/journal.c @@ -563,6 +563,8 @@ int log_wait_commit(journal_t *journal, tid_t tid) spin_unlock(&journal->j_state_lock); #endif spin_lock(&journal->j_state_lock); + if (!tid_geq(journal->j_commit_waited, tid)) + journal->j_commit_waited = tid; while (tid_gt(tid, journal->j_commit_sequence)) { jbd_debug(1, "JBD: want %d, j_commit_sequence=%d\n", tid, journal->j_commit_sequence); @@ -921,8 +923,33 @@ static int journal_reset(journal_t *journal) journal->j_max_transaction_buffers = journal->j_maxlen / 4; - /* Add the dynamic fields and write it to disk. */ - journal_update_superblock(journal, 1); + /* + * As a special case, if the on-disk copy is already marked as needing + * no recovery (s_start == 0), then we can safely defer the superblock + * update until the next commit by setting JFS_FLUSHED. This avoids + * attempting a write to a potential-readonly device. + */ + if (sb->s_start == 0) { + jbd_debug(1,"JBD: Skipping superblock update on recovered sb " + "(start %u, seq %d, errno %d)\n", + journal->j_tail, journal->j_tail_sequence, + journal->j_errno); + journal->j_flags |= JFS_FLUSHED; + } else { + /* Lock here to make assertions happy... */ + mutex_lock(&journal->j_checkpoint_mutex); + /* + * Update log tail information. We use WRITE_FUA since new + * transaction will start reusing journal space and so we + * must make sure information about current log tail is on + * disk before that. + */ + journal_update_sb_log_tail(journal, + journal->j_tail_sequence, + journal->j_tail, + WRITE_FUA); + mutex_unlock(&journal->j_checkpoint_mutex); + } return journal_start_thread(journal); } @@ -999,35 +1026,15 @@ int journal_create(journal_t *journal) return journal_reset(journal); } -/** - * void journal_update_superblock() - Update journal sb on disk. - * @journal: The journal to update. - * @wait: Set to '0' if you don't want to wait for IO completion. - * - * Update a journal's dynamic superblock fields and write it to disk, - * optionally waiting for the IO to complete. - */ -void journal_update_superblock(journal_t *journal, int wait) +static void journal_write_superblock(journal_t *journal, int write_op) { - journal_superblock_t *sb = journal->j_superblock; struct buffer_head *bh = journal->j_sb_buffer; + int ret; - /* - * As a special case, if the on-disk copy is already marked as needing - * no recovery (s_start == 0) and there are no outstanding transactions - * in the filesystem, then we can safely defer the superblock update - * until the next commit by setting JFS_FLUSHED. This avoids - * attempting a write to a potential-readonly device. - */ - if (sb->s_start == 0 && journal->j_tail_sequence == - journal->j_transaction_sequence) { - jbd_debug(1,"JBD: Skipping superblock update on recovered sb " - "(start %u, seq %d, errno %d)\n", - journal->j_tail, journal->j_tail_sequence, - journal->j_errno); - goto out; - } - + trace_journal_write_superblock(journal, write_op); + if (!(journal->j_flags & JFS_BARRIER)) + write_op &= ~(REQ_FUA | REQ_FLUSH); + lock_buffer(bh); if (buffer_write_io_error(bh)) { char b[BDEVNAME_SIZE]; /* @@ -1045,42 +1052,100 @@ void journal_update_superblock(journal_t *journal, int wait) set_buffer_uptodate(bh); } + get_bh(bh); + bh->b_end_io = end_buffer_write_sync; + ret = submit_bh(write_op, bh); + wait_on_buffer(bh); + if (buffer_write_io_error(bh)) { + clear_buffer_write_io_error(bh); + set_buffer_uptodate(bh); + ret = -EIO; + } + if (ret) { + char b[BDEVNAME_SIZE]; + printk(KERN_ERR "JBD: Error %d detected " + "when updating journal superblock for %s.\n", + ret, journal_dev_name(journal, b)); + } +} + +/** + * journal_update_sb_log_tail() - Update log tail in journal sb on disk. + * @journal: The journal to update. + * @tail_tid: TID of the new transaction at the tail of the log + * @tail_block: The first block of the transaction at the tail of the log + * @write_op: With which operation should we write the journal sb + * + * Update a journal's superblock information about log tail and write it to + * disk, waiting for the IO to complete. + */ +void journal_update_sb_log_tail(journal_t *journal, tid_t tail_tid, + unsigned int tail_block, int write_op) +{ + journal_superblock_t *sb = journal->j_superblock; + + BUG_ON(!mutex_is_locked(&journal->j_checkpoint_mutex)); + jbd_debug(1,"JBD: updating superblock (start %u, seq %u)\n", + tail_block, tail_tid); + + sb->s_sequence = cpu_to_be32(tail_tid); + sb->s_start = cpu_to_be32(tail_block); + + journal_write_superblock(journal, write_op); + + /* Log is no longer empty */ + spin_lock(&journal->j_state_lock); + WARN_ON(!sb->s_sequence); + journal->j_flags &= ~JFS_FLUSHED; + spin_unlock(&journal->j_state_lock); +} + +/** + * mark_journal_empty() - Mark on disk journal as empty. + * @journal: The journal to update. + * + * Update a journal's dynamic superblock fields to show that journal is empty. + * Write updated superblock to disk waiting for IO to complete. + */ +static void mark_journal_empty(journal_t *journal) +{ + journal_superblock_t *sb = journal->j_superblock; + + BUG_ON(!mutex_is_locked(&journal->j_checkpoint_mutex)); spin_lock(&journal->j_state_lock); - jbd_debug(1,"JBD: updating superblock (start %u, seq %d, errno %d)\n", - journal->j_tail, journal->j_tail_sequence, journal->j_errno); + jbd_debug(1, "JBD: Marking journal as empty (seq %d)\n", + journal->j_tail_sequence); sb->s_sequence = cpu_to_be32(journal->j_tail_sequence); - sb->s_start = cpu_to_be32(journal->j_tail); - sb->s_errno = cpu_to_be32(journal->j_errno); + sb->s_start = cpu_to_be32(0); spin_unlock(&journal->j_state_lock); - BUFFER_TRACE(bh, "marking dirty"); - mark_buffer_dirty(bh); - if (wait) { - sync_dirty_buffer(bh); - if (buffer_write_io_error(bh)) { - char b[BDEVNAME_SIZE]; - printk(KERN_ERR "JBD: I/O error detected " - "when updating journal superblock for %s.\n", - journal_dev_name(journal, b)); - clear_buffer_write_io_error(bh); - set_buffer_uptodate(bh); - } - } else - write_dirty_buffer(bh, WRITE); + journal_write_superblock(journal, WRITE_FUA); - trace_jbd_update_superblock_end(journal, wait); -out: - /* If we have just flushed the log (by marking s_start==0), then - * any future commit will have to be careful to update the - * superblock again to re-record the true start of the log. */ + spin_lock(&journal->j_state_lock); + /* Log is empty */ + journal->j_flags |= JFS_FLUSHED; + spin_unlock(&journal->j_state_lock); +} + +/** + * journal_update_sb_errno() - Update error in the journal. + * @journal: The journal to update. + * + * Update a journal's errno. Write updated superblock to disk waiting for IO + * to complete. + */ +static void journal_update_sb_errno(journal_t *journal) +{ + journal_superblock_t *sb = journal->j_superblock; spin_lock(&journal->j_state_lock); - if (sb->s_start) - journal->j_flags &= ~JFS_FLUSHED; - else - journal->j_flags |= JFS_FLUSHED; + jbd_debug(1, "JBD: updating superblock error (errno %d)\n", + journal->j_errno); + sb->s_errno = cpu_to_be32(journal->j_errno); spin_unlock(&journal->j_state_lock); + + journal_write_superblock(journal, WRITE_SYNC); } /* @@ -1251,6 +1316,8 @@ int journal_destroy(journal_t *journal) /* Force any old transactions to disk */ + /* We cannot race with anybody but must keep assertions happy */ + mutex_lock(&journal->j_checkpoint_mutex); /* Totally anal locking here... */ spin_lock(&journal->j_list_lock); while (journal->j_checkpoint_transactions != NULL) { @@ -1266,16 +1333,14 @@ int journal_destroy(journal_t *journal) if (journal->j_sb_buffer) { if (!is_journal_aborted(journal)) { - /* We can now mark the journal as empty. */ - journal->j_tail = 0; journal->j_tail_sequence = ++journal->j_transaction_sequence; - journal_update_superblock(journal, 1); - } else { + mark_journal_empty(journal); + } else err = -EIO; - } brelse(journal->j_sb_buffer); } + mutex_unlock(&journal->j_checkpoint_mutex); if (journal->j_inode) iput(journal->j_inode); @@ -1455,7 +1520,6 @@ int journal_flush(journal_t *journal) { int err = 0; transaction_t *transaction = NULL; - unsigned int old_tail; spin_lock(&journal->j_state_lock); @@ -1490,6 +1554,7 @@ int journal_flush(journal_t *journal) if (is_journal_aborted(journal)) return -EIO; + mutex_lock(&journal->j_checkpoint_mutex); cleanup_journal_tail(journal); /* Finally, mark the journal as really needing no recovery. @@ -1497,14 +1562,9 @@ int journal_flush(journal_t *journal) * the magic code for a fully-recovered superblock. Any future * commits of data to the journal will restore the current * s_start value. */ + mark_journal_empty(journal); + mutex_unlock(&journal->j_checkpoint_mutex); spin_lock(&journal->j_state_lock); - old_tail = journal->j_tail; - journal->j_tail = 0; - spin_unlock(&journal->j_state_lock); - journal_update_superblock(journal, 1); - spin_lock(&journal->j_state_lock); - journal->j_tail = old_tail; - J_ASSERT(!journal->j_running_transaction); J_ASSERT(!journal->j_committing_transaction); J_ASSERT(!journal->j_checkpoint_transactions); @@ -1544,8 +1604,12 @@ int journal_wipe(journal_t *journal, int write) write ? "Clearing" : "Ignoring"); err = journal_skip_recovery(journal); - if (write) - journal_update_superblock(journal, 1); + if (write) { + /* Lock to make assertions happy... */ + mutex_lock(&journal->j_checkpoint_mutex); + mark_journal_empty(journal); + mutex_unlock(&journal->j_checkpoint_mutex); + } no_recovery: return err; @@ -1613,7 +1677,7 @@ static void __journal_abort_soft (journal_t *journal, int errno) __journal_abort_hard(journal); if (errno) - journal_update_superblock(journal, 1); + journal_update_sb_errno(journal); } /** |