1 files changed, 40 insertions, 138 deletions

diff --git a/fs/xfs/xfs_inode.c b/fs/xfs/xfs_inode.c
index 768087bedba..a6115fe1ac9 100644
--- a/fs/xfs/xfs_inode.c
+++ b/fs/xfs/xfs_inode.c
@@ -655,7 +655,6 @@ xfs_ialloc(
 	uint		flags;
 	int		error;
 	timespec_t	tv;
-	int		filestreams = 0;
 
 	/*
 	 * Call the space management code to pick
@@ -682,6 +681,14 @@ xfs_ialloc(
 		return error;
 	ASSERT(ip != NULL);
 
+	/*
+	 * We always convert v1 inodes to v2 now - we only support filesystems
+	 * with >= v2 inode capability, so there is no reason for ever leaving
+	 * an inode in v1 format.
+	 */
+	if (ip->i_d.di_version == 1)
+		ip->i_d.di_version = 2;
+
 	ip->i_d.di_mode = mode;
 	ip->i_d.di_onlink = 0;
 	ip->i_d.di_nlink = nlink;
@@ -691,27 +698,6 @@ xfs_ialloc(
 	xfs_set_projid(ip, prid);
 	memset(&(ip->i_d.di_pad[0]), 0, sizeof(ip->i_d.di_pad));
 
-	/*
-	 * If the superblock version is up to where we support new format
-	 * inodes and this is currently an old format inode, then change
-	 * the inode version number now.  This way we only do the conversion
-	 * here rather than here and in the flush/logging code.
-	 */
-	if (xfs_sb_version_hasnlink(&mp->m_sb) &&
-	    ip->i_d.di_version == 1) {
-		ip->i_d.di_version = 2;
-		/*
-		 * We've already zeroed the old link count, the projid field,
-		 * and the pad field.
-		 */
-	}
-
-	/*
-	 * Project ids won't be stored on disk if we are using a version 1 inode.
-	 */
-	if ((prid != 0) && (ip->i_d.di_version == 1))
-		xfs_bump_ino_vers2(tp, ip);
-
 	if (pip && XFS_INHERIT_GID(pip)) {
 		ip->i_d.di_gid = pip->i_d.di_gid;
 		if ((pip->i_d.di_mode & S_ISGID) && S_ISDIR(mode)) {
@@ -772,13 +758,6 @@ xfs_ialloc(
 		flags |= XFS_ILOG_DEV;
 		break;
 	case S_IFREG:
-		/*
-		 * we can't set up filestreams until after the VFS inode
-		 * is set up properly.
-		 */
-		if (pip && xfs_inode_is_filestream(pip))
-			filestreams = 1;
-		/* fall through */
 	case S_IFDIR:
 		if (pip && (pip->i_d.di_flags & XFS_DIFLAG_ANY)) {
 			uint	di_flags = 0;
@@ -844,15 +823,6 @@ xfs_ialloc(
 	/* now that we have an i_mode we can setup inode ops and unlock */
 	xfs_setup_inode(ip);
 
-	/* now we have set up the vfs inode we can associate the filestream */
-	if (filestreams) {
-		error = xfs_filestream_associate(pip, ip);
-		if (error < 0)
-			return -error;
-		if (!error)
-			xfs_iflags_set(ip, XFS_IFILESTREAM);
-	}
-
 	*ipp = ip;
 	return 0;
 }
@@ -1073,40 +1043,6 @@ xfs_droplink(
 }
 
 /*
- * This gets called when the inode's version needs to be changed from 1 to 2.
- * Currently this happens when the nlink field overflows the old 16-bit value
- * or when chproj is called to change the project for the first time.
- * As a side effect the superblock version will also get rev'd
- * to contain the NLINK bit.
- */
-void
-xfs_bump_ino_vers2(
-	xfs_trans_t	*tp,
-	xfs_inode_t	*ip)
-{
-	xfs_mount_t	*mp;
-
-	ASSERT(xfs_isilocked(ip, XFS_ILOCK_EXCL));
-	ASSERT(ip->i_d.di_version == 1);
-
-	ip->i_d.di_version = 2;
-	ip->i_d.di_onlink = 0;
-	memset(&(ip->i_d.di_pad[0]), 0, sizeof(ip->i_d.di_pad));
-	mp = tp->t_mountp;
-	if (!xfs_sb_version_hasnlink(&mp->m_sb)) {
-		spin_lock(&mp->m_sb_lock);
-		if (!xfs_sb_version_hasnlink(&mp->m_sb)) {
-			xfs_sb_version_addnlink(&mp->m_sb);
-			spin_unlock(&mp->m_sb_lock);
-			xfs_mod_sb(tp, XFS_SB_VERSIONNUM);
-		} else {
-			spin_unlock(&mp->m_sb_lock);
-		}
-	}
-	/* Caller must log the inode */
-}
-
-/*
  * Increment the link count on an inode & log the change.
  */
 int
@@ -1116,22 +1052,10 @@ xfs_bumplink(
 {
 	xfs_trans_ichgtime(tp, ip, XFS_ICHGTIME_CHG);
 
+	ASSERT(ip->i_d.di_version > 1);
 	ASSERT(ip->i_d.di_nlink > 0 || (VFS_I(ip)->i_state & I_LINKABLE));
 	ip->i_d.di_nlink++;
 	inc_nlink(VFS_I(ip));
-	if ((ip->i_d.di_version == 1) &&
-	    (ip->i_d.di_nlink > XFS_MAXLINK_1)) {
-		/*
-		 * The inode has increased its number of links beyond
-		 * what can fit in an old format inode.  It now needs
-		 * to be converted to a version 2 inode with a 32 bit
-		 * link count.  If this is the first inode in the file
-		 * system to do this, then we need to bump the superblock
-		 * version number as well.
-		 */
-		xfs_bump_ino_vers2(tp, ip);
-	}
-
 	xfs_trans_log_inode(tp, ip, XFS_ILOG_CORE);
 	return 0;
 }
@@ -1699,16 +1623,6 @@ xfs_release(
 		int truncated;
 
 		/*
-		 * If we are using filestreams, and we have an unlinked
-		 * file that we are processing the last close on, then nothing
-		 * will be able to reopen and write to this file. Purge this
-		 * inode from the filestreams cache so that it doesn't delay
-		 * teardown of the inode.
-		 */
-		if ((ip->i_d.di_nlink == 0) && xfs_inode_is_filestream(ip))
-			xfs_filestream_deassociate(ip);
-
-		/*
 		 * If we previously truncated this file and removed old data
 		 * in the process, we want to initiate "early" writeout on
 		 * the last close.  This is an attempt to combat the notorious
@@ -1838,9 +1752,33 @@ xfs_inactive_ifree(
 	int			error;
 
 	tp = xfs_trans_alloc(mp, XFS_TRANS_INACTIVE);
-	error = xfs_trans_reserve(tp, &M_RES(mp)->tr_ifree, 0, 0);
+
+	/*
+	 * The ifree transaction might need to allocate blocks for record
+	 * insertion to the finobt. We don't want to fail here at ENOSPC, so
+	 * allow ifree to dip into the reserved block pool if necessary.
+	 *
+	 * Freeing large sets of inodes generally means freeing inode chunks,
+	 * directory and file data blocks, so this should be relatively safe.
+	 * Only under severe circumstances should it be possible to free enough
+	 * inodes to exhaust the reserve block pool via finobt expansion while
+	 * at the same time not creating free space in the filesystem.
+	 *
+	 * Send a warning if the reservation does happen to fail, as the inode
+	 * now remains allocated and sits on the unlinked list until the fs is
+	 * repaired.
+	 */
+	tp->t_flags |= XFS_TRANS_RESERVE;
+	error = xfs_trans_reserve(tp, &M_RES(mp)->tr_ifree,
+				  XFS_IFREE_SPACE_RES(mp), 0);
 	if (error) {
-		ASSERT(XFS_FORCED_SHUTDOWN(mp));
+		if (error == ENOSPC) {
+			xfs_warn_ratelimited(mp,
+			"Failed to remove inode(s) from unlinked list. "
+			"Please free space, unmount and run xfs_repair.");
+		} else {
+			ASSERT(XFS_FORCED_SHUTDOWN(mp));
+		}
 		xfs_trans_cancel(tp, XFS_TRANS_RELEASE_LOG_RES);
 		return error;
 	}
@@ -2664,13 +2602,7 @@ xfs_remove(
 	if (error)
 		goto std_return;
 
-	/*
-	 * If we are using filestreams, kill the stream association.
-	 * If the file is still open it may get a new one but that
-	 * will get killed on last close in xfs_close() so we don't
-	 * have to worry about that.
-	 */
-	if (!is_dir && link_zero && xfs_inode_is_filestream(ip))
+	if (is_dir && xfs_inode_is_filestream(ip))
 		xfs_filestream_deassociate(ip);
 
 	return 0;
@@ -3258,6 +3190,7 @@ xfs_iflush_int(
 	ASSERT(ip->i_d.di_format != XFS_DINODE_FMT_BTREE ||
 	       ip->i_d.di_nextents > XFS_IFORK_MAXEXT(ip, XFS_DATA_FORK));
 	ASSERT(iip != NULL && iip->ili_fields != 0);
+	ASSERT(ip->i_d.di_version > 1);
 
 	/* set *dip = inode's place in the buffer */
 	dip = (xfs_dinode_t *)xfs_buf_offset(bp, ip->i_imap.im_boffset);
@@ -3318,7 +3251,7 @@ xfs_iflush_int(
 	}
 
 	/*
-	 * Inode item log recovery for v1/v2 inodes are dependent on the
+	 * Inode item log recovery for v2 inodes are dependent on the
 	 * di_flushiter count for correct sequencing. We bump the flush
 	 * iteration count so we can detect flushes which postdate a log record
 	 * during recovery. This is redundant as we now log every change and
@@ -3341,40 +3274,9 @@ xfs_iflush_int(
 	if (ip->i_d.di_flushiter == DI_MAX_FLUSH)
 		ip->i_d.di_flushiter = 0;
 
-	/*
-	 * If this is really an old format inode and the superblock version
-	 * has not been updated to support only new format inodes, then
-	 * convert back to the old inode format.  If the superblock version
-	 * has been updated, then make the conversion permanent.
-	 */
-	ASSERT(ip->i_d.di_version == 1 || xfs_sb_version_hasnlink(&mp->m_sb));
-	if (ip->i_d.di_version == 1) {
-		if (!xfs_sb_version_hasnlink(&mp->m_sb)) {
-			/*
-			 * Convert it back.
-			 */
-			ASSERT(ip->i_d.di_nlink <= XFS_MAXLINK_1);
-			dip->di_onlink = cpu_to_be16(ip->i_d.di_nlink);
-		} else {
-			/*
-			 * The superblock version has already been bumped,
-			 * so just make the conversion to the new inode
-			 * format permanent.
-			 */
-			ip->i_d.di_version = 2;
-			dip->di_version = 2;
-			ip->i_d.di_onlink = 0;
-			dip->di_onlink = 0;
-			memset(&(ip->i_d.di_pad[0]), 0, sizeof(ip->i_d.di_pad));
-			memset(&(dip->di_pad[0]), 0,
-			      sizeof(dip->di_pad));
-			ASSERT(xfs_get_projid(ip) == 0);
-		}
-	}
-
-	xfs_iflush_fork(ip, dip, iip, XFS_DATA_FORK, bp);
+	xfs_iflush_fork(ip, dip, iip, XFS_DATA_FORK);
 	if (XFS_IFORK_Q(ip))
-		xfs_iflush_fork(ip, dip, iip, XFS_ATTR_FORK, bp);
+		xfs_iflush_fork(ip, dip, iip, XFS_ATTR_FORK);
 	xfs_inobp_check(mp, bp);
 
 	/*