diff options
Diffstat (limited to 'fs/xfs/xfs_log_recover.c')
-rw-r--r-- | fs/xfs/xfs_log_recover.c | 46 |
1 files changed, 23 insertions, 23 deletions
diff --git a/fs/xfs/xfs_log_recover.c b/fs/xfs/xfs_log_recover.c index 0de08e36631..14a69aec2c0 100644 --- a/fs/xfs/xfs_log_recover.c +++ b/fs/xfs/xfs_log_recover.c @@ -1576,7 +1576,7 @@ xlog_recover_reorder_trans( switch (ITEM_TYPE(item)) { case XFS_LI_BUF: - if (!(buf_f->blf_flags & XFS_BLI_CANCEL)) { + if (!(buf_f->blf_flags & XFS_BLF_CANCEL)) { trace_xfs_log_recover_item_reorder_head(log, trans, item, pass); list_move(&item->ri_list, &trans->r_itemq); @@ -1638,7 +1638,7 @@ xlog_recover_do_buffer_pass1( /* * If this isn't a cancel buffer item, then just return. */ - if (!(flags & XFS_BLI_CANCEL)) { + if (!(flags & XFS_BLF_CANCEL)) { trace_xfs_log_recover_buf_not_cancel(log, buf_f); return; } @@ -1696,7 +1696,7 @@ xlog_recover_do_buffer_pass1( * Check to see whether the buffer being recovered has a corresponding * entry in the buffer cancel record table. If it does then return 1 * so that it will be cancelled, otherwise return 0. If the buffer is - * actually a buffer cancel item (XFS_BLI_CANCEL is set), then decrement + * actually a buffer cancel item (XFS_BLF_CANCEL is set), then decrement * the refcount on the entry in the table and remove it from the table * if this is the last reference. * @@ -1721,7 +1721,7 @@ xlog_check_buffer_cancelled( * There is nothing in the table built in pass one, * so this buffer must not be cancelled. */ - ASSERT(!(flags & XFS_BLI_CANCEL)); + ASSERT(!(flags & XFS_BLF_CANCEL)); return 0; } @@ -1733,7 +1733,7 @@ xlog_check_buffer_cancelled( * There is no corresponding entry in the table built * in pass one, so this buffer has not been cancelled. */ - ASSERT(!(flags & XFS_BLI_CANCEL)); + ASSERT(!(flags & XFS_BLF_CANCEL)); return 0; } @@ -1752,7 +1752,7 @@ xlog_check_buffer_cancelled( * one in the table and remove it if this is the * last reference. */ - if (flags & XFS_BLI_CANCEL) { + if (flags & XFS_BLF_CANCEL) { bcp->bc_refcount--; if (bcp->bc_refcount == 0) { if (prevp == NULL) { @@ -1772,7 +1772,7 @@ xlog_check_buffer_cancelled( * We didn't find a corresponding entry in the table, so * return 0 so that the buffer is NOT cancelled. */ - ASSERT(!(flags & XFS_BLI_CANCEL)); + ASSERT(!(flags & XFS_BLF_CANCEL)); return 0; } @@ -1874,8 +1874,8 @@ xlog_recover_do_inode_buffer( nbits = xfs_contig_bits(data_map, map_size, bit); ASSERT(nbits > 0); - reg_buf_offset = bit << XFS_BLI_SHIFT; - reg_buf_bytes = nbits << XFS_BLI_SHIFT; + reg_buf_offset = bit << XFS_BLF_SHIFT; + reg_buf_bytes = nbits << XFS_BLF_SHIFT; item_index++; } @@ -1889,7 +1889,7 @@ xlog_recover_do_inode_buffer( } ASSERT(item->ri_buf[item_index].i_addr != NULL); - ASSERT((item->ri_buf[item_index].i_len % XFS_BLI_CHUNK) == 0); + ASSERT((item->ri_buf[item_index].i_len % XFS_BLF_CHUNK) == 0); ASSERT((reg_buf_offset + reg_buf_bytes) <= XFS_BUF_COUNT(bp)); /* @@ -1955,9 +1955,9 @@ xlog_recover_do_reg_buffer( nbits = xfs_contig_bits(data_map, map_size, bit); ASSERT(nbits > 0); ASSERT(item->ri_buf[i].i_addr != NULL); - ASSERT(item->ri_buf[i].i_len % XFS_BLI_CHUNK == 0); + ASSERT(item->ri_buf[i].i_len % XFS_BLF_CHUNK == 0); ASSERT(XFS_BUF_COUNT(bp) >= - ((uint)bit << XFS_BLI_SHIFT)+(nbits<<XFS_BLI_SHIFT)); + ((uint)bit << XFS_BLF_SHIFT)+(nbits<<XFS_BLF_SHIFT)); /* * Do a sanity check if this is a dquot buffer. Just checking @@ -1966,7 +1966,7 @@ xlog_recover_do_reg_buffer( */ error = 0; if (buf_f->blf_flags & - (XFS_BLI_UDQUOT_BUF|XFS_BLI_PDQUOT_BUF|XFS_BLI_GDQUOT_BUF)) { + (XFS_BLF_UDQUOT_BUF|XFS_BLF_PDQUOT_BUF|XFS_BLF_GDQUOT_BUF)) { if (item->ri_buf[i].i_addr == NULL) { cmn_err(CE_ALERT, "XFS: NULL dquot in %s.", __func__); @@ -1987,9 +1987,9 @@ xlog_recover_do_reg_buffer( } memcpy(xfs_buf_offset(bp, - (uint)bit << XFS_BLI_SHIFT), /* dest */ + (uint)bit << XFS_BLF_SHIFT), /* dest */ item->ri_buf[i].i_addr, /* source */ - nbits<<XFS_BLI_SHIFT); /* length */ + nbits<<XFS_BLF_SHIFT); /* length */ next: i++; bit += nbits; @@ -2148,11 +2148,11 @@ xlog_recover_do_dquot_buffer( } type = 0; - if (buf_f->blf_flags & XFS_BLI_UDQUOT_BUF) + if (buf_f->blf_flags & XFS_BLF_UDQUOT_BUF) type |= XFS_DQ_USER; - if (buf_f->blf_flags & XFS_BLI_PDQUOT_BUF) + if (buf_f->blf_flags & XFS_BLF_PDQUOT_BUF) type |= XFS_DQ_PROJ; - if (buf_f->blf_flags & XFS_BLI_GDQUOT_BUF) + if (buf_f->blf_flags & XFS_BLF_GDQUOT_BUF) type |= XFS_DQ_GROUP; /* * This type of quotas was turned off, so ignore this buffer @@ -2173,7 +2173,7 @@ xlog_recover_do_dquot_buffer( * here which overlaps that may be stale. * * When meta-data buffers are freed at run time we log a buffer item - * with the XFS_BLI_CANCEL bit set to indicate that previous copies + * with the XFS_BLF_CANCEL bit set to indicate that previous copies * of the buffer in the log should not be replayed at recovery time. * This is so that if the blocks covered by the buffer are reused for * file data before we crash we don't end up replaying old, freed @@ -2207,7 +2207,7 @@ xlog_recover_do_buffer_trans( if (pass == XLOG_RECOVER_PASS1) { /* * In this pass we're only looking for buf items - * with the XFS_BLI_CANCEL bit set. + * with the XFS_BLF_CANCEL bit set. */ xlog_recover_do_buffer_pass1(log, buf_f); return 0; @@ -2244,7 +2244,7 @@ xlog_recover_do_buffer_trans( mp = log->l_mp; buf_flags = XBF_LOCK; - if (!(flags & XFS_BLI_INODE_BUF)) + if (!(flags & XFS_BLF_INODE_BUF)) buf_flags |= XBF_MAPPED; bp = xfs_buf_read(mp->m_ddev_targp, blkno, len, buf_flags); @@ -2257,10 +2257,10 @@ xlog_recover_do_buffer_trans( } error = 0; - if (flags & XFS_BLI_INODE_BUF) { + if (flags & XFS_BLF_INODE_BUF) { error = xlog_recover_do_inode_buffer(mp, item, bp, buf_f); } else if (flags & - (XFS_BLI_UDQUOT_BUF|XFS_BLI_PDQUOT_BUF|XFS_BLI_GDQUOT_BUF)) { + (XFS_BLF_UDQUOT_BUF|XFS_BLF_PDQUOT_BUF|XFS_BLF_GDQUOT_BUF)) { xlog_recover_do_dquot_buffer(mp, log, item, bp, buf_f); } else { xlog_recover_do_reg_buffer(mp, item, bp, buf_f); |