diff options
Diffstat (limited to 'fs')
| -rw-r--r-- | fs/bio.c | 18 | ||||
| -rw-r--r-- | fs/buffer.c | 11 | ||||
| -rw-r--r-- | fs/direct-io.c | 2 | ||||
| -rw-r--r-- | fs/ext4/extents.c | 2 | ||||
| -rw-r--r-- | fs/gfs2/ops_fstype.c | 5 | ||||
| -rw-r--r-- | fs/inode.c | 36 | ||||
| -rw-r--r-- | fs/ocfs2/file.c | 94 | ||||
| -rw-r--r-- | fs/pipe.c | 42 | ||||
| -rw-r--r-- | fs/splice.c | 371 |
9 files changed, 325 insertions, 256 deletions
@@ -348,6 +348,24 @@ err: return NULL; } +/** + * bio_alloc - allocate a bio for I/O + * @gfp_mask: the GFP_ mask given to the slab allocator + * @nr_iovecs: number of iovecs to pre-allocate + * + * Description: + * bio_alloc will allocate a bio and associated bio_vec array that can hold + * at least @nr_iovecs entries. Allocations will be done from the + * fs_bio_set. Also see @bio_alloc_bioset. + * + * If %__GFP_WAIT is set, then bio_alloc will always be able to allocate + * a bio. This is due to the mempool guarantees. To make this work, callers + * must never allocate more than 1 bio at the time from this pool. Callers + * that need to allocate more than 1 bio must always submit the previously + * allocate bio for IO before attempting to allocate a new one. Failure to + * do so can cause livelocks under memory pressure. + * + **/ struct bio *bio_alloc(gfp_t gfp_mask, int nr_iovecs) { struct bio *bio = bio_alloc_bioset(gfp_mask, nr_iovecs, fs_bio_set); diff --git a/fs/buffer.c b/fs/buffer.c index 13edf7ad3ff..ff8bb1f2333 100644 --- a/fs/buffer.c +++ b/fs/buffer.c @@ -547,7 +547,7 @@ repeat: return err; } -void do_thaw_all(unsigned long unused) +void do_thaw_all(struct work_struct *work) { struct super_block *sb; char b[BDEVNAME_SIZE]; @@ -567,6 +567,7 @@ restart: goto restart; } spin_unlock(&sb_lock); + kfree(work); printk(KERN_WARNING "Emergency Thaw complete\n"); } @@ -577,7 +578,13 @@ restart: */ void emergency_thaw_all(void) { - pdflush_operation(do_thaw_all, 0); + struct work_struct *work; + + work = kmalloc(sizeof(*work), GFP_ATOMIC); + if (work) { + INIT_WORK(work, do_thaw_all); + schedule_work(work); + } } /** diff --git a/fs/direct-io.c b/fs/direct-io.c index da258e7249c..05763bbc205 100644 --- a/fs/direct-io.c +++ b/fs/direct-io.c @@ -307,8 +307,6 @@ dio_bio_alloc(struct dio *dio, struct block_device *bdev, struct bio *bio; bio = bio_alloc(GFP_KERNEL, nr_vecs); - if (bio == NULL) - return -ENOMEM; bio->bi_bdev = bdev; bio->bi_sector = first_sector; diff --git a/fs/ext4/extents.c b/fs/ext4/extents.c index 6132353dcf6..2a1cb097976 100644 --- a/fs/ext4/extents.c +++ b/fs/ext4/extents.c @@ -2416,8 +2416,6 @@ static int ext4_ext_zeroout(struct inode *inode, struct ext4_extent *ex) len = ee_len; bio = bio_alloc(GFP_NOIO, len); - if (!bio) - return -ENOMEM; bio->bi_sector = ee_pblock; bio->bi_bdev = inode->i_sb->s_bdev; diff --git a/fs/gfs2/ops_fstype.c b/fs/gfs2/ops_fstype.c index 51883b3ad89..650a730707b 100644 --- a/fs/gfs2/ops_fstype.c +++ b/fs/gfs2/ops_fstype.c @@ -272,11 +272,6 @@ static int gfs2_read_super(struct gfs2_sbd *sdp, sector_t sector) lock_page(page); bio = bio_alloc(GFP_NOFS, 1); - if (unlikely(!bio)) { - __free_page(page); - return -ENOBUFS; - } - bio->bi_sector = sector * (sb->s_blocksize >> 9); bio->bi_bdev = sb->s_bdev; bio_add_page(bio, page, PAGE_SIZE, 0); diff --git a/fs/inode.c b/fs/inode.c index d06d6d268de..6ad14a1cd8c 100644 --- a/fs/inode.c +++ b/fs/inode.c @@ -1470,42 +1470,6 @@ static void __wait_on_freeing_inode(struct inode *inode) spin_lock(&inode_lock); } -/* - * We rarely want to lock two inodes that do not have a parent/child - * relationship (such as directory, child inode) simultaneously. The - * vast majority of file systems should be able to get along fine - * without this. Do not use these functions except as a last resort. - */ -void inode_double_lock(struct inode *inode1, struct inode *inode2) -{ - if (inode1 == NULL || inode2 == NULL || inode1 == inode2) { - if (inode1) - mutex_lock(&inode1->i_mutex); - else if (inode2) - mutex_lock(&inode2->i_mutex); - return; - } - - if (inode1 < inode2) { - mutex_lock_nested(&inode1->i_mutex, I_MUTEX_PARENT); - mutex_lock_nested(&inode2->i_mutex, I_MUTEX_CHILD); - } else { - mutex_lock_nested(&inode2->i_mutex, I_MUTEX_PARENT); - mutex_lock_nested(&inode1->i_mutex, I_MUTEX_CHILD); - } -} -EXPORT_SYMBOL(inode_double_lock); - -void inode_double_unlock(struct inode *inode1, struct inode *inode2) -{ - if (inode1) - mutex_unlock(&inode1->i_mutex); - - if (inode2 && inode2 != inode1) - mutex_unlock(&inode2->i_mutex); -} -EXPORT_SYMBOL(inode_double_unlock); - static __initdata unsigned long ihash_entries; static int __init set_ihash_entries(char *str) { diff --git a/fs/ocfs2/file.c b/fs/ocfs2/file.c index 8672b953603..c2a87c885b7 100644 --- a/fs/ocfs2/file.c +++ b/fs/ocfs2/file.c @@ -1912,6 +1912,22 @@ out_sems: return written ? written : ret; } +static int ocfs2_splice_to_file(struct pipe_inode_info *pipe, + struct file *out, + struct splice_desc *sd) +{ + int ret; + + ret = ocfs2_prepare_inode_for_write(out->f_path.dentry, &sd->pos, + sd->total_len, 0, NULL); + if (ret < 0) { + mlog_errno(ret); + return ret; + } + + return splice_from_pipe_feed(pipe, sd, pipe_to_file); +} + static ssize_t ocfs2_file_splice_write(struct pipe_inode_info *pipe, struct file *out, loff_t *ppos, @@ -1919,38 +1935,76 @@ static ssize_t ocfs2_file_splice_write(struct pipe_inode_info *pipe, unsigned int flags) { int ret; - struct inode *inode = out->f_path.dentry->d_inode; + struct address_space *mapping = out->f_mapping; + struct inode *inode = mapping->host; + struct splice_desc sd = { + .total_len = len, + .flags = flags, + .pos = *ppos, + .u.file = out, + }; mlog_entry("(0x%p, 0x%p, %u, '%.*s')\n", out, pipe, (unsigned int)len, out->f_path.dentry->d_name.len, out->f_path.dentry->d_name.name); - mutex_lock_nested(&inode->i_mutex, I_MUTEX_PARENT); + if (pipe->inode) + mutex_lock_nested(&pipe->inode->i_mutex, I_MUTEX_PARENT); - ret = ocfs2_rw_lock(inode, 1); - if (ret < 0) { - mlog_errno(ret); - goto out; - } + splice_from_pipe_begin(&sd); + do { + ret = splice_from_pipe_next(pipe, &sd); + if (ret <= 0) + break; - ret = ocfs2_prepare_inode_for_write(out->f_path.dentry, ppos, len, 0, - NULL); - if (ret < 0) { - mlog_errno(ret); - goto out_unlock; - } + mutex_lock_nested(&inode->i_mutex, I_MUTEX_CHILD); + ret = ocfs2_rw_lock(inode, 1); + if (ret < 0) + mlog_errno(ret); + else { + ret = ocfs2_splice_to_file(pipe, out, &sd); + ocfs2_rw_unlock(inode, 1); + } + mutex_unlock(&inode->i_mutex); + } while (ret > 0); + splice_from_pipe_end(pipe, &sd); if (pipe->inode) - mutex_lock_nested(&pipe->inode->i_mutex, I_MUTEX_CHILD); - ret = generic_file_splice_write_nolock(pipe, out, ppos, len, flags); - if (pipe->inode) mutex_unlock(&pipe->inode->i_mutex); -out_unlock: - ocfs2_rw_unlock(inode, 1); -out: - mutex_unlock(&inode->i_mutex); + if (sd.num_spliced) + ret = sd.num_spliced; + + if (ret > 0) { + unsigned long nr_pages; + + *ppos += ret; + nr_pages = (ret + PAGE_CACHE_SIZE - 1) >> PAGE_CACHE_SHIFT; + + /* + * If file or inode is SYNC and we actually wrote some data, + * sync it. + */ + if (unlikely((out->f_flags & O_SYNC) || IS_SYNC(inode))) { + int err; + + mutex_lock(&inode->i_mutex); + err = ocfs2_rw_lock(inode, 1); + if (err < 0) { + mlog_errno(err); + } else { + err = generic_osync_inode(inode, mapping, + OSYNC_METADATA|OSYNC_DATA); + ocfs2_rw_unlock(inode, 1); + } + mutex_unlock(&inode->i_mutex); + + if (err) + ret = err; + } + balance_dirty_pages_ratelimited_nr(mapping, nr_pages); + } mlog_exit(ret); return ret; diff --git a/fs/pipe.c b/fs/pipe.c index 4af7aa52181..13414ec45b8 100644 --- a/fs/pipe.c +++ b/fs/pipe.c @@ -37,6 +37,42 @@ * -- Manfred Spraul <manfred@colorfullife.com> 2002-05-09 */ +static void pipe_lock_nested(struct pipe_inode_info *pipe, int subclass) +{ + if (pipe->inode) + mutex_lock_nested(&pipe->inode->i_mutex, subclass); +} + +void pipe_lock(struct pipe_inode_info *pipe) +{ + /* + * pipe_lock() nests non-pipe inode locks (for writing to a file) + */ + pipe_lock_nested(pipe, I_MUTEX_PARENT); +} +EXPORT_SYMBOL(pipe_lock); + +void pipe_unlock(struct pipe_inode_info *pipe) +{ + if (pipe->inode) + mutex_unlock(&pipe->inode->i_mutex); +} +EXPORT_SYMBOL(pipe_unlock); + +void pipe_double_lock(struct pipe_inode_info *pipe1, + struct pipe_inode_info *pipe2) +{ + BUG_ON(pipe1 == pipe2); + + if (pipe1 < pipe2) { + pipe_lock_nested(pipe1, I_MUTEX_PARENT); + pipe_lock_nested(pipe2, I_MUTEX_CHILD); + } else { + pipe_lock_nested(pipe2, I_MUTEX_CHILD); + pipe_lock_nested(pipe1, I_MUTEX_PARENT); + } +} + /* Drop the inode semaphore and wait for a pipe event, atomically */ void pipe_wait(struct pipe_inode_info *pipe) { @@ -47,12 +83,10 @@ void pipe_wait(struct pipe_inode_info *pipe) * is considered a noninteractive wait: */ prepare_to_wait(&pipe->wait, &wait, TASK_INTERRUPTIBLE); - if (pipe->inode) - mutex_unlock(&pipe->inode->i_mutex); + pipe_unlock(pipe); schedule(); finish_wait(&pipe->wait, &wait); - if (pipe->inode) - mutex_lock(&pipe->inode->i_mutex); + pipe_lock(pipe); } static int diff --git a/fs/splice.c b/fs/splice.c index c18aa7e03e2..5384a90665d 100644 --- a/fs/splice.c +++ b/fs/splice.c @@ -182,8 +182,7 @@ ssize_t splice_to_pipe(struct pipe_inode_info *pipe, do_wakeup = 0; page_nr = 0; - if (pipe->inode) - mutex_lock(&pipe->inode->i_mutex); + pipe_lock(pipe); for (;;) { if (!pipe->readers) { @@ -245,15 +244,13 @@ ssize_t splice_to_pipe(struct pipe_inode_info *pipe, pipe->waiting_writers--; } - if (pipe->inode) { - mutex_unlock(&pipe->inode->i_mutex); + pipe_unlock(pipe); - if (do_wakeup) { - smp_mb(); - if (waitqueue_active(&pipe->wait)) - wake_up_interruptible(&pipe->wait); - kill_fasync(&pipe->fasync_readers, SIGIO, POLL_IN); - } + if (do_wakeup) { + smp_mb(); + if (waitqueue_active(&pipe->wait)) + wake_up_interruptible(&pipe->wait); + kill_fasync(&pipe->fasync_readers, SIGIO, POLL_IN); } while (page_nr < spd_pages) @@ -555,8 +552,8 @@ static int pipe_to_sendpage(struct pipe_inode_info *pipe, * SPLICE_F_MOVE isn't set, or we cannot move the page, we simply create * a new page in the output file page cache and fill/dirty that. */ -static int pipe_to_file(struct pipe_inode_info *pipe, struct pipe_buffer *buf, - struct splice_desc *sd) +int pipe_to_file(struct pipe_inode_info *pipe, struct pipe_buffer *buf, + struct splice_desc *sd) { struct file *file = sd->u.file; struct address_space *mapping = file->f_mapping; @@ -600,108 +597,178 @@ static int pipe_to_file(struct pipe_inode_info *pipe, struct pipe_buffer *buf, out: return ret; } +EXPORT_SYMBOL(pipe_to_file); + +static void wakeup_pipe_writers(struct pipe_inode_info *pipe) +{ + smp_mb(); + if (waitqueue_active(&pipe->wait)) + wake_up_interruptible(&pipe->wait); + kill_fasync(&pipe->fasync_writers, SIGIO, POLL_OUT); +} /** - * __splice_from_pipe - splice data from a pipe to given actor + * splice_from_pipe_feed - feed available data from a pipe to a file * @pipe: pipe to splice from * @sd: information to @actor * @actor: handler that splices the data * * Description: - * This function does little more than loop over the pipe and call - * @actor to do the actual moving of a single struct pipe_buffer to - * the desired destination. See pipe_to_file, pipe_to_sendpage, or - * pipe_to_user. + + * This function loops over the pipe and calls @actor to do the + * actual moving of a single struct pipe_buffer to the desired + * destination. It returns when there's no more buffers left in + * the pipe or if the requested number of bytes (@sd->total_len) + * have been copied. It returns a positive number (one) if the + * pipe needs to be filled with more data, zero if the required + * number of bytes have been copied and -errno on error. * + * This, together with splice_from_pipe_{begin,end,next}, may be + * used to implement the functionality of __splice_from_pipe() when + * locking is required around copying the pipe buffers to the + * destination. */ -ssize_t __splice_from_pipe(struct pipe_inode_info *pipe, struct splice_desc *sd, - splice_actor *actor) +int splice_from_pipe_feed(struct pipe_inode_info *pipe, struct splice_desc *sd, + splice_actor *actor) { - int ret, do_wakeup, err; - - ret = 0; - do_wakeup = 0; - - for (;;) { - if (pipe->nrbufs) { - struct pipe_buffer *buf = pipe->bufs + pipe->curbuf; - const struct pipe_buf_operations *ops = buf->ops; + int ret; - sd->len = buf->len; - if (sd->len > sd->total_len) - sd->len = sd->total_len; + while (pipe->nrbufs) { + struct pipe_buffer *buf = pipe->bufs + pipe->curbuf; + const struct pipe_buf_operations *ops = buf->ops; - err = actor(pipe, buf, sd); - if (err <= 0) { - if (!ret && err != -ENODATA) - ret = err; + sd->len = buf->len; + if (sd->len > sd->total_len) + sd->len = sd->total_len; - break; - } + ret = actor(pipe, buf, sd); + if (ret <= 0) { + if (ret == -ENODATA) + ret = 0; + return ret; + } + buf->offset += ret; + buf->len -= ret; - ret += err; - buf->offset += err; - buf->len -= err; + sd->num_spliced += ret; + sd->len -= ret; + sd->pos += ret; + sd->total_len -= ret; - sd->len -= err; - sd->pos += err; - sd->total_len -= err; - if (sd->len) - continue; + if (!buf->len) { + buf->ops = NULL; + ops->release(pipe, buf); + pipe->curbuf = (pipe->curbuf + 1) & (PIPE_BUFFERS - 1); + pipe->nrbufs--; + if (pipe->inode) + sd->need_wakeup = true; + } - if (!buf->len) { - buf->ops = NULL; - ops->release(pipe, buf); - pipe->curbuf = (pipe->curbuf + 1) & (PIPE_BUFFERS - 1); - pipe->nrbufs--; - if (pipe->inode) - do_wakeup = 1; - } + if (!sd->total_len) + return 0; + } - if (!sd->total_len) - break; - } + return 1; +} +EXPORT_SYMBOL(splice_from_pipe_feed); - if (pipe->nrbufs) - continue; +/** + * splice_from_pipe_next - wait for some data to splice from + * @pipe: pipe to splice from + * @sd: information about the splice operation + * + * Description: + * This function will wait for some data and return a positive + * value (one) if pipe buffers are available. It will return zero + * or -errno if no more data needs to be spliced. + */ +int splice_from_pipe_next(struct pipe_inode_info *pipe, struct splice_desc *sd) +{ + while (!pipe->nrbufs) { if (!pipe->writers) - break; - if (!pipe->waiting_writers) { - if (ret) - break; - } + return 0; - if (sd->flags & SPLICE_F_NONBLOCK) { - if (!ret) - ret = -EAGAIN; - break; - } + if (!pipe->waiting_writers && sd->num_spliced) + return 0; - if (signal_pending(current)) { - if (!ret) - ret = -ERESTARTSYS; - break; - } + if (sd->flags & SPLICE_F_NONBLOCK) + return -EAGAIN; - if (do_wakeup) { - smp_mb(); - if (waitqueue_active(&pipe->wait)) - wake_up_interruptible_sync(&pipe->wait); - kill_fasync(&pipe->fasync_writers, SIGIO, POLL_OUT); - do_wakeup = 0; + if (signal_pending(current)) + return -ERESTARTSYS; + + if (sd->need_wakeup) { + wakeup_pipe_writers(pipe); + sd->need_wakeup = false; } pipe_wait(pipe); } - if (do_wakeup) { - smp_mb(); - if (waitqueue_active(&pipe->wait)) - wake_up_interruptible(&pipe->wait); - kill_fasync(&pipe->fasync_writers, SIGIO, POLL_OUT); - } + return 1; +} +EXPORT_SYMBOL(splice_from_pipe_next); - return ret; +/** + * splice_from_pipe_begin - start splicing from pipe + * @pipe: pipe to splice from + * + * Description: + * This function should be called before a loop containing + * splice_from_pipe_next() and splice_from_pipe_feed() to + * initialize the necessary fields of @sd. + */ +void splice_from_pipe_begin(struct splice_desc *sd) +{ + sd->num_spliced = 0; + sd->need_wakeup = false; +} +EXPORT_SYMBOL(splice_from_pipe_begin); + +/** + * splice_from_pipe_end - finish splicing from pipe + * @pipe: pipe to splice from + * @sd: information about the splice operation + * + * Description: + * This function will wake up pipe writers if necessary. It should + * be called after a loop containing splice_from_pipe_next() and + * splice_from_pipe_feed(). + */ +void splice_from_pipe_end(struct pipe_inode_info *pipe, struct splice_desc *sd) +{ + if (sd->need_wakeup) + wakeup_pipe_writers(pipe); +} +EXPORT_SYMBOL(splice_from_pipe_end); + +/** + * __splice_from_pipe - splice data from a pipe to given actor + * @pipe: pipe to splice from + * @sd: information to @actor + * @actor: handler that splices the data + * + * Description: + * This function does little more than loop over the pipe and call + * @actor to do the actual moving of a single struct pipe_buffer to + * the desired destination. See pipe_to_file, pipe_to_sendpage, or + * pipe_to_user. + * + */ +ssize_t __splice_from_pipe(struct pipe_inode_info *pipe, struct splice_desc *sd, + splice_actor *actor) +{ + int ret; + + splice_from_pipe_begin(sd); + do { + ret = splice_from_pipe_next(pipe, sd); + if (ret > 0) + ret = splice_from_pipe_feed(pipe, sd, actor); + } while (ret > 0); + splice_from_pipe_end(pipe, sd); + + return sd->num_spliced ? sd->num_spliced : ret; } EXPORT_SYMBOL(__splice_from_pipe); @@ -715,7 +782,7 @@ EXPORT_SYMBOL(__splice_from_pipe); * @actor: handler that splices the data * * Description: - * See __splice_from_pipe. This function locks the input and output inodes, + * See __splice_from_pipe. This function locks the pipe inode, * otherwise it's identical to __splice_from_pipe(). * */ @@ -724,7 +791,6 @@ ssize_t splice_from_pipe(struct pipe_inode_info *pipe, struct file *out, splice_actor *actor) { ssize_t ret; - struct inode *inode = out->f_mapping->host; struct splice_desc sd = { .total_len = len, .flags = flags, @@ -732,30 +798,15 @@ ssize_t splice_from_pipe(struct pipe_inode_info *pipe, struct file *out, .u.file = out, }; - /* - * The actor worker might be calling ->write_begin and - * ->write_end. Most of the time, these expect i_mutex to - * be held. Since this may result in an ABBA deadlock with - * pipe->inode, we have to order lock acquiry here. - * - * Outer lock must be inode->i_mutex, as pipe_wait() will - * release and reacquire pipe->inode->i_mutex, AND inode must - * never be a pipe. - */ - WARN_ON(S_ISFIFO(inode->i_mode)); - mutex_lock_nested(&inode->i_mutex, I_MUTEX_PARENT); - if (pipe->inode) - mutex_lock_nested(&pipe->inode->i_mutex, I_MUTEX_CHILD); + pipe_lock(pipe); ret = __splice_from_pipe(pipe, &sd, actor); - if (pipe->inode) - mutex_unlock(&pipe->inode->i_mutex); - mutex_unlock(&inode->i_mutex); + pipe_unlock(pipe); return ret; } /** - * generic_file_splice_write_nolock - generic_file_splice_write without mutexes + * generic_file_splice_write - splice data from a pipe to a file * @pipe: pipe info * @out: file to write to * @ppos: position in @out @@ -764,13 +815,12 @@ ssize_t splice_from_pipe(struct pipe_inode_info *pipe, struct file *out, * * Description: * Will either move or copy pages (determined by @flags options) from - * the given pipe inode to the given file. The caller is responsible - * for acquiring i_mutex on both inodes. + * the given pipe inode to the given file. * */ ssize_t -generic_file_splice_write_nolock(struct pipe_inode_info *pipe, struct file *out, - loff_t *ppos, size_t len, unsigned int flags) +generic_file_splice_write(struct pipe_inode_info *pipe, struct file *out, + loff_t *ppos, size_t len, unsigned int flags) { struct address_space *mapping = out->f_mapping; struct inode *inode = mapping->host; @@ -781,76 +831,28 @@ generic_file_splice_write_nolock(struct pipe_inode_info *pipe, struct file *out, .u.file = out, }; ssize_t ret; - int err; - - err = file_remove_suid(out); - if (unlikely(err)) - return err; - - ret = __splice_from_pipe(pipe, &sd, pipe_to_file); - if (ret > 0) { - unsigned long nr_pages; - *ppos += ret; - nr_pages = (ret + PAGE_CACHE_SIZE - 1) >> PAGE_CACHE_SHIFT; + pipe_lock(pipe); - /* - * If file or inode is SYNC and we actually wrote some data, - * sync it. - */ - if (unlikely((out->f_flags & O_SYNC) || IS_SYNC(inode))) { - err = generic_osync_inode(inode, mapping, - OSYNC_METADATA|OSYNC_DATA); - - if (err) - ret = err; - } - balance_dirty_pages_ratelimited_nr(mapping, nr_pages); - } + splice_from_pipe_begin(&sd); + do { + ret = splice_from_pipe_next(pipe, &sd); + if (ret <= 0) + break; - return ret; -} + mutex_lock_nested(&inode->i_mutex, I_MUTEX_CHILD); + ret = file_remove_suid(out); + if (!ret) + ret = splice_from_pipe_feed(pipe, &sd, pipe_to_file); + mutex_unlock(&inode->i_mutex); + } while (ret > 0); + splice_from_pipe_end(pipe, &sd); -EXPORT_SYMBOL(generic_file_splice_write_nolock); + pipe_unlock(pipe); -/** - * generic_file_splice_write - splice data from a pipe to a file - * @pipe: pipe info - * @out: file to write to - * @ppos: position in @out - * @len: number of bytes to splice - * @flags: splice modifier flags - * - * Description: - * Will either move or copy pages (determined by @flags options) from - * the given pipe inode to the given file. - * - */ -ssize_t -generic_file_splice_write(struct pipe_inode_info *pipe, struct file *out, - loff_t *ppos, size_t len, unsigned int flags) -{ - struct address_space *mapping = out->f_mapping; - struct inode *inode = mapping->host; - struct splice_desc sd = { - .total_len = len, - .flags = flags, - .pos = *ppos, - .u.file = out, - }; - ssize_t ret; + if (sd.num_spliced) + ret = sd.num_spliced; - WARN_ON(S_ISFIFO(inode->i_mode)); - mutex_lock_nested(&inode->i_mutex, I_MUTEX_PARENT); - ret = file_remove_suid(out); - if (likely(!ret)) { - if (pipe->inode) - mutex_lock_nested(&pipe->inode->i_mutex, I_MUTEX_CHILD); - ret = __splice_from_pipe(pipe, &sd, pipe_to_file); - if (pipe->inode) - mutex_unlock(&pipe->inode->i_mutex); - } - mutex_unlock(&inode->i_mutex); if (ret > 0) { unsigned long nr_pages; @@ -1339,8 +1341,7 @@ static long vmsplice_to_user(struct file *file, const struct iovec __user *iov, if (!pipe) return -EBADF; - if (pipe->inode) - mutex_lock(&pipe->inode->i_mutex); + pipe_lock(pipe); error = ret = 0; while (nr_segs) { @@ -1395,8 +1396,7 @@ static long vmsplice_to_user(struct file *file, const struct iovec __user *iov, iov++; } - if (pipe->inode) - mutex_unlock(&pipe->inode->i_mutex); + pipe_unlock(pipe); if (!ret) ret = error; @@ -1524,7 +1524,7 @@ static int link_ipipe_prep(struct pipe_inode_info *pipe, unsigned int flags) return 0; ret = 0; - mutex_lock(&pipe->inode->i_mutex); + pipe_lock(pipe); while (!pipe->nrbufs) { if (signal_pending(current)) { @@ -1542,7 +1542,7 @@ static int link_ipipe_prep(struct pipe_inode_info *pipe, unsigned int flags) pipe_wait(pipe); } - mutex_unlock(&pipe->inode->i_mutex); + pipe_unlock(pipe); return ret; } @@ -1562,7 +1562,7 @@ static int link_opipe_prep(struct pipe_inode_info *pipe, unsigned int flags) return 0; ret = 0; - mutex_lock(&pipe->inode->i_mutex); + pipe_lock(pipe); while (pipe->nrbufs >= PIPE_BUFFERS) { if (!pipe->readers) { @@ -1583,7 +1583,7 @@ static int link_opipe_prep(struct pipe_inode_info *pipe, unsigned int flags) pipe->waiting_writers--; } - mutex_unlock(&pipe->inode->i_mutex); + pipe_unlock(pipe); return ret; } @@ -1599,10 +1599,10 @@ static int link_pipe(struct pipe_inode_info *ipipe, /* * Potential ABBA deadlock, work around it by ordering lock - * grabbing by inode address. Otherwise two different processes + * grabbing by pipe info address. Otherwise two different processes * could deadlock (one doing tee from A -> B, the other from B -> A). */ - inode_double_lock(ipipe->inode, opipe->inode); + pipe_double_lock(ipipe, opipe); do { if (!opipe->readers) { @@ -1653,7 +1653,8 @@ static int link_pipe(struct pipe_inode_info *ipipe, if (!ret && ipipe->waiting_writers && (flags & SPLICE_F_NONBLOCK)) ret = -EAGAIN; - inode_double_unlock(ipipe->inode, opipe->inode); + pipe_unlock(ipipe); + pipe_unlock(opipe); /* * If we put data in the output pipe, wakeup any potential readers. |