3 files changed, 297 insertions, 294 deletions

diff --git a/fs/compat.c b/fs/compat.c
index cb36245f9fe..fe3c9bf8760 100644
--- a/fs/compat.c
+++ b/fs/compat.c
@@ -1469,6 +1469,57 @@ out_ret:
 
 #define __COMPAT_NFDBITS       (8 * sizeof(compat_ulong_t))
 
+static int poll_select_copy_remaining(struct timespec *end_time, void __user *p,
+				      int timeval, int ret)
+{
+	struct timespec ts;
+
+	if (!p)
+		return ret;
+
+	if (current->personality & STICKY_TIMEOUTS)
+		goto sticky;
+
+	/* No update for zero timeout */
+	if (!end_time->tv_sec && !end_time->tv_nsec)
+		return ret;
+
+	ktime_get_ts(&ts);
+	ts = timespec_sub(*end_time, ts);
+	if (ts.tv_sec < 0)
+		ts.tv_sec = ts.tv_nsec = 0;
+
+	if (timeval) {
+		struct compat_timeval rtv;
+
+		rtv.tv_sec = ts.tv_sec;
+		rtv.tv_usec = ts.tv_nsec / NSEC_PER_USEC;
+
+		if (!copy_to_user(p, &rtv, sizeof(rtv)))
+			return ret;
+	} else {
+		struct compat_timespec rts;
+
+		rts.tv_sec = ts.tv_sec;
+		rts.tv_nsec = ts.tv_nsec;
+
+		if (!copy_to_user(p, &rts, sizeof(rts)))
+			return ret;
+	}
+	/*
+	 * If an application puts its timeval in read-only memory, we
+	 * don't want the Linux-specific update to the timeval to
+	 * cause a fault after the select has completed
+	 * successfully. However, because we're not updating the
+	 * timeval, we can't restart the system call.
+	 */
+
+sticky:
+	if (ret == -ERESTARTNOHAND)
+		ret = -EINTR;
+	return ret;
+}
+
 /*
  * Ooo, nasty.  We need here to frob 32-bit unsigned longs to
  * 64-bit unsigned longs.
@@ -1550,7 +1601,8 @@ int compat_set_fd_set(unsigned long nr, compat_ulong_t __user *ufdset,
 	((unsigned long) (MAX_SCHEDULE_TIMEOUT / HZ)-1)
 
 int compat_core_sys_select(int n, compat_ulong_t __user *inp,
-	compat_ulong_t __user *outp, compat_ulong_t __user *exp, s64 *timeout)
+	compat_ulong_t __user *outp, compat_ulong_t __user *exp,
+	struct timespec *end_time)
 {
 	fd_set_bits fds;
 	void *bits;
@@ -1597,7 +1649,7 @@ int compat_core_sys_select(int n, compat_ulong_t __user *inp,
 	zero_fd_set(n, fds.res_out);
 	zero_fd_set(n, fds.res_ex);
 
-	ret = do_select(n, &fds, timeout);
+	ret = do_select(n, &fds, end_time);
 
 	if (ret < 0)
 		goto out;
@@ -1623,7 +1675,7 @@ asmlinkage long compat_sys_select(int n, compat_ulong_t __user *inp,
 	compat_ulong_t __user *outp, compat_ulong_t __user *exp,
 	struct compat_timeval __user *tvp)
 {
-	s64 timeout = -1;
+	struct timespec end_time, *to = NULL;
 	struct compat_timeval tv;
 	int ret;
 
@@ -1631,43 +1683,14 @@ asmlinkage long compat_sys_select(int n, compat_ulong_t __user *inp,
 		if (copy_from_user(&tv, tvp, sizeof(tv)))
 			return -EFAULT;
 
-		if (tv.tv_sec < 0 || tv.tv_usec < 0)
+		to = &end_time;
+		if (poll_select_set_timeout(to, tv.tv_sec,
+					    tv.tv_usec * NSEC_PER_USEC))
 			return -EINVAL;
-
-		/* Cast to u64 to make GCC stop complaining */
-		if ((u64)tv.tv_sec >= (u64)MAX_INT64_SECONDS)
-			timeout = -1;	/* infinite */
-		else {
-			timeout = DIV_ROUND_UP(tv.tv_usec, 1000000/HZ);
-			timeout += tv.tv_sec * HZ;
-		}
 	}
 
-	ret = compat_core_sys_select(n, inp, outp, exp, &timeout);
-
-	if (tvp) {
-		struct compat_timeval rtv;
-
-		if (current->personality & STICKY_TIMEOUTS)
-			goto sticky;
-		rtv.tv_usec = jiffies_to_usecs(do_div((*(u64*)&timeout), HZ));
-		rtv.tv_sec = timeout;
-		if (compat_timeval_compare(&rtv, &tv) >= 0)
-			rtv = tv;
-		if (copy_to_user(tvp, &rtv, sizeof(rtv))) {
-sticky:
-			/*
-			 * If an application puts its timeval in read-only
-			 * memory, we don't want the Linux-specific update to
-			 * the timeval to cause a fault after the select has
-			 * completed successfully. However, because we're not
-			 * updating the timeval, we can't restart the system
-			 * call.
-			 */
-			if (ret == -ERESTARTNOHAND)
-				ret = -EINTR;
-		}
-	}
+	ret = compat_core_sys_select(n, inp, outp, exp, to);
+	ret = poll_select_copy_remaining(&end_time, tvp, 1, ret);
 
 	return ret;
 }
@@ -1680,15 +1703,16 @@ asmlinkage long compat_sys_pselect7(int n, compat_ulong_t __user *inp,
 {
 	compat_sigset_t ss32;
 	sigset_t ksigmask, sigsaved;
-	s64 timeout = MAX_SCHEDULE_TIMEOUT;
 	struct compat_timespec ts;
+	struct timespec end_time, *to = NULL;
 	int ret;
 
 	if (tsp) {
 		if (copy_from_user(&ts, tsp, sizeof(ts)))
 			return -EFAULT;
 
-		if (ts.tv_sec < 0 || ts.tv_nsec < 0)
+		to = &end_time;
+		if (poll_select_set_timeout(to, ts.tv_sec, ts.tv_nsec))
 			return -EINVAL;
 	}
 
@@ -1703,51 +1727,8 @@ asmlinkage long compat_sys_pselect7(int n, compat_ulong_t __user *inp,
 		sigprocmask(SIG_SETMASK, &ksigmask, &sigsaved);
 	}
 
-	do {
-		if (tsp) {
-			if ((unsigned long)ts.tv_sec < MAX_SELECT_SECONDS) {
-				timeout = DIV_ROUND_UP(ts.tv_nsec, 1000000000/HZ);
-				timeout += ts.tv_sec * (unsigned long)HZ;
-				ts.tv_sec = 0;
-				ts.tv_nsec = 0;
-			} else {
-				ts.tv_sec -= MAX_SELECT_SECONDS;
-				timeout = MAX_SELECT_SECONDS * HZ;
-			}
-		}
-
-		ret = compat_core_sys_select(n, inp, outp, exp, &timeout);
-
-	} while (!ret && !timeout && tsp && (ts.tv_sec || ts.tv_nsec));
-
-	if (tsp) {
-		struct compat_timespec rts;
-
-		if (current->personality & STICKY_TIMEOUTS)
-			goto sticky;
-
-		rts.tv_sec = timeout / HZ;
-		rts.tv_nsec = (timeout % HZ) * (NSEC_PER_SEC/HZ);
-		if (rts.tv_nsec >= NSEC_PER_SEC) {
-			rts.tv_sec++;
-			rts.tv_nsec -= NSEC_PER_SEC;
-		}
-		if (compat_timespec_compare(&rts, &ts) >= 0)
-			rts = ts;
-		if (copy_to_user(tsp, &rts, sizeof(rts))) {
-sticky:
-			/*
-			 * If an application puts its timeval in read-only
-			 * memory, we don't want the Linux-specific update to
-			 * the timeval to cause a fault after the select has
-			 * completed successfully. However, because we're not
-			 * updating the timeval, we can't restart the system
-			 * call.
-			 */
-			if (ret == -ERESTARTNOHAND)
-				ret = -EINTR;
-		}
-	}
+	ret = compat_core_sys_select(n, inp, outp, exp, to);
+	ret = poll_select_copy_remaining(&end_time, tsp, 0, ret);
 
 	if (ret == -ERESTARTNOHAND) {
 		/*
@@ -1792,18 +1773,16 @@ asmlinkage long compat_sys_ppoll(struct pollfd __user *ufds,
 	compat_sigset_t ss32;
 	sigset_t ksigmask, sigsaved;
 	struct compat_timespec ts;
-	s64 timeout = -1;
+	struct timespec end_time, *to = NULL;
 	int ret;
 
 	if (tsp) {
 		if (copy_from_user(&ts, tsp, sizeof(ts)))
 			return -EFAULT;
 
-		/* We assume that ts.tv_sec is always lower than
-		   the number of seconds that can be expressed in
-		   an s64. Otherwise the compiler bitches at us */
-		timeout = DIV_ROUND_UP(ts.tv_nsec, 1000000000/HZ);
-		timeout += ts.tv_sec * HZ;
+		to = &end_time;
+		if (poll_select_set_timeout(to, ts.tv_sec, ts.tv_nsec))
+			return -EINVAL;
 	}
 
 	if (sigmask) {
@@ -1817,7 +1796,7 @@ asmlinkage long compat_sys_ppoll(struct pollfd __user *ufds,
 		sigprocmask(SIG_SETMASK, &ksigmask, &sigsaved);
 	}
 
-	ret = do_sys_poll(ufds, nfds, &timeout);
+	ret = do_sys_poll(ufds, nfds, to);
 
 	/* We can restart this syscall, usually */
 	if (ret == -EINTR) {
@@ -1835,31 +1814,7 @@ asmlinkage long compat_sys_ppoll(struct pollfd __user *ufds,
 	} else if (sigmask)
 		sigprocmask(SIG_SETMASK, &sigsaved, NULL);
 
-	if (tsp && timeout >= 0) {
-		struct compat_timespec rts;
-
-		if (current->personality & STICKY_TIMEOUTS)
-			goto sticky;
-		/* Yes, we know it's actually an s64, but it's also positive. */
-		rts.tv_nsec = jiffies_to_usecs(do_div((*(u64*)&timeout), HZ)) *
-					1000;
-		rts.tv_sec = timeout;
-		if (compat_timespec_compare(&rts, &ts) >= 0)
-			rts = ts;
-		if (copy_to_user(tsp, &rts, sizeof(rts))) {
-sticky:
-			/*
-			 * If an application puts its timeval in read-only
-			 * memory, we don't want the Linux-specific update to
-			 * the timeval to cause a fault after the select has
-			 * completed successfully. However, because we're not
-			 * updating the timeval, we can't restart the system
-			 * call.
-			 */
-			if (ret == -ERESTARTNOHAND && timeout >= 0)
-				ret = -EINTR;
-		}
-	}
+	ret = poll_select_copy_remaining(&end_time, tsp, 0, ret);
 
 	return ret;
 }
diff --git a/fs/select.c b/fs/select.c
index da0e88201c3..448e4400128 100644
--- a/fs/select.c
+++ b/fs/select.c
@@ -24,9 +24,64 @@
 #include <linux/fdtable.h>
 #include <linux/fs.h>
 #include <linux/rcupdate.h>
+#include <linux/hrtimer.h>
 
 #include <asm/uaccess.h>
 
+
+/*
+ * Estimate expected accuracy in ns from a timeval.
+ *
+ * After quite a bit of churning around, we've settled on
+ * a simple thing of taking 0.1% of the timeout as the
+ * slack, with a cap of 100 msec.
+ * "nice" tasks get a 0.5% slack instead.
+ *
+ * Consider this comment an open invitation to come up with even
+ * better solutions..
+ */
+
+static long __estimate_accuracy(struct timespec *tv)
+{
+	long slack;
+	int divfactor = 1000;
+
+	if (task_nice(current) > 0)
+		divfactor = divfactor / 5;
+
+	slack = tv->tv_nsec / divfactor;
+	slack += tv->tv_sec * (NSEC_PER_SEC/divfactor);
+
+	if (slack > 100 * NSEC_PER_MSEC)
+		slack =  100 * NSEC_PER_MSEC;
+
+	if (slack < 0)
+		slack = 0;
+	return slack;
+}
+
+static long estimate_accuracy(struct timespec *tv)
+{
+	unsigned long ret;
+	struct timespec now;
+
+	/*
+	 * Realtime tasks get a slack of 0 for obvious reasons.
+	 */
+
+	if (rt_task(current))
+		return 0;
+
+	ktime_get_ts(&now);
+	now = timespec_sub(*tv, now);
+	ret = __estimate_accuracy(&now);
+	if (ret < current->timer_slack_ns)
+		return current->timer_slack_ns;
+	return ret;
+}
+
+
+
 struct poll_table_page {
 	struct poll_table_page * next;
 	struct poll_table_entry * entry;
@@ -130,6 +185,79 @@ static void __pollwait(struct file *filp, wait_queue_head_t *wait_address,
 	add_wait_queue(wait_address, &entry->wait);
 }
 
+/**
+ * poll_select_set_timeout - helper function to setup the timeout value
+ * @to:		pointer to timespec variable for the final timeout
+ * @sec:	seconds (from user space)
+ * @nsec:	nanoseconds (from user space)
+ *
+ * Note, we do not use a timespec for the user space value here, That
+ * way we can use the function for timeval and compat interfaces as well.
+ *
+ * Returns -EINVAL if sec/nsec are not normalized. Otherwise 0.
+ */
+int poll_select_set_timeout(struct timespec *to, long sec, long nsec)
+{
+	struct timespec ts = {.tv_sec = sec, .tv_nsec = nsec};
+
+	if (!timespec_valid(&ts))
+		return -EINVAL;
+
+	/* Optimize for the zero timeout value here */
+	if (!sec && !nsec) {
+		to->tv_sec = to->tv_nsec = 0;
+	} else {
+		ktime_get_ts(to);
+		*to = timespec_add_safe(*to, ts);
+	}
+	return 0;
+}
+
+static int poll_select_copy_remaining(struct timespec *end_time, void __user *p,
+				      int timeval, int ret)
+{
+	struct timespec rts;
+	struct timeval rtv;
+
+	if (!p)
+		return ret;
+
+	if (current->personality & STICKY_TIMEOUTS)
+		goto sticky;
+
+	/* No update for zero timeout */
+	if (!end_time->tv_sec && !end_time->tv_nsec)
+		return ret;
+
+	ktime_get_ts(&rts);
+	rts = timespec_sub(*end_time, rts);
+	if (rts.tv_sec < 0)
+		rts.tv_sec = rts.tv_nsec = 0;
+
+	if (timeval) {
+		rtv.tv_sec = rts.tv_sec;
+		rtv.tv_usec = rts.tv_nsec / NSEC_PER_USEC;
+
+		if (!copy_to_user(p, &rtv, sizeof(rtv)))
+			return ret;
+
+	} else if (!copy_to_user(p, &rts, sizeof(rts)))
+		return ret;
+
+	/*
+	 * If an application puts its timeval in read-only memory, we
+	 * don't want the Linux-specific update to the timeval to
+	 * cause a fault after the select has completed
+	 * successfully. However, because we're not updating the
+	 * timeval, we can't restart the system call.
+	 */
+
+sticky:
+	if (ret == -ERESTARTNOHAND)
+		ret = -EINTR;
+	return ret;
+}
+
 #define FDS_IN(fds, n)		(fds->in + n)
 #define FDS_OUT(fds, n)		(fds->out + n)
 #define FDS_EX(fds, n)		(fds->ex + n)
@@ -182,11 +310,13 @@ get_max:
 #define POLLOUT_SET (POLLWRBAND | POLLWRNORM | POLLOUT | POLLERR)
 #define POLLEX_SET (POLLPRI)
 
-int do_select(int n, fd_set_bits *fds, s64 *timeout)
+int do_select(int n, fd_set_bits *fds, struct timespec *end_time)
 {
+	ktime_t expire, *to = NULL;
 	struct poll_wqueues table;
 	poll_table *wait;
-	int retval, i;
+	int retval, i, timed_out = 0;
+	unsigned long slack = 0;
 
 	rcu_read_lock();
 	retval = max_select_fd(n, fds);
@@ -198,12 +328,17 @@ int do_select(int n, fd_set_bits *fds, s64 *timeout)
 
 	poll_initwait(&table);
 	wait = &table.pt;
-	if (!*timeout)
+	if (end_time && !end_time->tv_sec && !end_time->tv_nsec) {
 		wait = NULL;
+		timed_out = 1;
+	}
+
+	if (end_time && !timed_out)
+		slack = estimate_accuracy(end_time);
+
 	retval = 0;
 	for (;;) {
 		unsigned long *rinp, *routp, *rexp, *inp, *outp, *exp;
-		long __timeout;
 
 		set_current_state(TASK_INTERRUPTIBLE);
 
@@ -259,27 +394,25 @@ int do_select(int n, fd_set_bits *fds, s64 *timeout)
 			cond_resched();
 		}
 		wait = NULL;
-		if (retval || !*timeout || signal_pending(current))
+		if (retval || timed_out || signal_pending(current))
 			break;
 		if (table.error) {
 			retval = table.error;
 			break;
 		}
 
-		if (*timeout < 0) {
-			/* Wait indefinitely */
-			__timeout = MAX_SCHEDULE_TIMEOUT;
-		} else if (unlikely(*timeout >= (s64)MAX_SCHEDULE_TIMEOUT - 1)) {
-			/* Wait for longer than MAX_SCHEDULE_TIMEOUT. Do it in a loop */
-			__timeout = MAX_SCHEDULE_TIMEOUT - 1;
-			*timeout -= __timeout;
-		} else {
-			__timeout = *timeout;
-			*timeout = 0;
+		/*
+		 * If this is the first loop and we have a timeout
+		 * given, then we convert to ktime_t and set the to
+		 * pointer to the expiry value.
+		 */
+		if (end_time && !to) {
+			expire = timespec_to_ktime(*end_time);
+			to = &expire;
 		}
-		__timeout = schedule_timeout(__timeout);
-		if (*timeout >= 0)
-			*timeout += __timeout;
+
+		if (!schedule_hrtimeout_range(to, slack, HRTIMER_MODE_ABS))
+			timed_out = 1;
 	}
 	__set_current_state(TASK_RUNNING);
 
@@ -300,7 +433,7 @@ int do_select(int n, fd_set_bits *fds, s64 *timeout)
 	((unsigned long) (MAX_SCHEDULE_TIMEOUT / HZ)-1)
 
 int core_sys_select(int n, fd_set __user *inp, fd_set __user *outp,
-			   fd_set __user *exp, s64 *timeout)
+			   fd_set __user *exp, struct timespec *end_time)
 {
 	fd_set_bits fds;
 	void *bits;
@@ -351,7 +484,7 @@ int core_sys_select(int n, fd_set __user *inp, fd_set __user *outp,
 	zero_fd_set(n, fds.res_out);
 	zero_fd_set(n, fds.res_ex);
 
-	ret = do_select(n, &fds, timeout);
+	ret = do_select(n, &fds, end_time);
 
 	if (ret < 0)
 		goto out;
@@ -377,7 +510,7 @@ out_nofds:
 asmlinkage long sys_select(int n, fd_set __user *inp, fd_set __user *outp,
 			fd_set __user *exp, struct timeval __user *tvp)
 {
-	s64 timeout = -1;
+	struct timespec end_time, *to = NULL;
 	struct timeval tv;
 	int ret;
 
@@ -385,43 +518,14 @@ asmlinkage long sys_select(int n, fd_set __user *inp, fd_set __user *outp,
 		if (copy_from_user(&tv, tvp, sizeof(tv)))
 			return -EFAULT;
 
-		if (tv.tv_sec < 0 || tv.tv_usec < 0)
+		to = &end_time;
+		if (poll_select_set_timeout(to, tv.tv_sec,
+					    tv.tv_usec * NSEC_PER_USEC))
 			return -EINVAL;
-
-		/* Cast to u64 to make GCC stop complaining */
-		if ((u64)tv.tv_sec >= (u64)MAX_INT64_SECONDS)
-			timeout = -1;	/* infinite */
-		else {
-			timeout = DIV_ROUND_UP(tv.tv_usec, USEC_PER_SEC/HZ);
-			timeout += tv.tv_sec * HZ;
-		}
 	}
 
-	ret = core_sys_select(n, inp, outp, exp, &timeout);
-
-	if (tvp) {
-		struct timeval rtv;
-
-		if (current->personality & STICKY_TIMEOUTS)
-			goto sticky;
-		rtv.tv_usec = jiffies_to_usecs(do_div((*(u64*)&timeout), HZ));
-		rtv.tv_sec = timeout;
-		if (timeval_compare(&rtv, &tv) >= 0)
-			rtv = tv;
-		if (copy_to_user(tvp, &rtv, sizeof(rtv))) {
-sticky:
-			/*
-			 * If an application puts its timeval in read-only
-			 * memory, we don't want the Linux-specific update to
-			 * the timeval to cause a fault after the select has
-			 * completed successfully. However, because we're not
-			 * updating the timeval, we can't restart the system
-			 * call.
-			 */
-			if (ret == -ERESTARTNOHAND)
-				ret = -EINTR;
-		}
-	}
+	ret = core_sys_select(n, inp, outp, exp, to);
+	ret = poll_select_copy_remaining(&end_time, tvp, 1, ret);
 
 	return ret;
 }
@@ -431,25 +535,17 @@ asmlinkage long sys_pselect7(int n, fd_set __user *inp, fd_set __user *outp,
 		fd_set __user *exp, struct timespec __user *tsp,
 		const sigset_t __user *sigmask, size_t sigsetsize)
 {
-	s64 timeout = MAX_SCHEDULE_TIMEOUT;
 	sigset_t ksigmask, sigsaved;
-	struct timespec ts;
+	struct timespec ts, end_time, *to = NULL;
 	int ret;
 
 	if (tsp) {
 		if (copy_from_user(&ts, tsp, sizeof(ts)))
 			return -EFAULT;
 
-		if (ts.tv_sec < 0 || ts.tv_nsec < 0)
+		to = &end_time;
+		if (poll_select_set_timeout(to, ts.tv_sec, ts.tv_nsec))
 			return -EINVAL;
-
-		/* Cast to u64 to make GCC stop complaining */
-		if ((u64)ts.tv_sec >= (u64)MAX_INT64_SECONDS)
-			timeout = -1;	/* infinite */
-		else {
-			timeout = DIV_ROUND_UP(ts.tv_nsec, NSEC_PER_SEC/HZ);
-			timeout += ts.tv_sec * HZ;
-		}
 	}
 
 	if (sigmask) {
@@ -463,32 +559,8 @@ asmlinkage long sys_pselect7(int n, fd_set __user *inp, fd_set __user *outp,
 		sigprocmask(SIG_SETMASK, &ksigmask, &sigsaved);
 	}
 
-	ret = core_sys_select(n, inp, outp, exp, &timeout);
-
-	if (tsp) {
-		struct timespec rts;
-
-		if (current->personality & STICKY_TIMEOUTS)
-			goto sticky;
-		rts.tv_nsec = jiffies_to_usecs(do_div((*(u64*)&timeout), HZ)) *
-						1000;
-		rts.tv_sec = timeout;
-		if (timespec_compare(&rts, &ts) >= 0)
-			rts = ts;
-		if (copy_to_user(tsp, &rts, sizeof(rts))) {
-sticky:
-			/*
-			 * If an application puts its timeval in read-only
-			 * memory, we don't want the Linux-specific update to
-			 * the timeval to cause a fault after the select has
-			 * completed successfully. However, because we're not
-			 * updating the timeval, we can't restart the system
-			 * call.
-			 */
-			if (ret == -ERESTARTNOHAND)
-				ret = -EINTR;
-		}
-	}
+	ret = core_sys_select(n, inp, outp, exp, &end_time);
+	ret = poll_select_copy_remaining(&end_time, tsp, 0, ret);
 
 	if (ret == -ERESTARTNOHAND) {
 		/*
@@ -574,18 +646,24 @@ static inline unsigned int do_pollfd(struct pollfd *pollfd, poll_table *pwait)
 }
 
 static int do_poll(unsigned int nfds,  struct poll_list *list,
-		   struct poll_wqueues *wait, s64 *timeout)
+		   struct poll_wqueues *wait, struct timespec *end_time)
 {
-	int count = 0;
 	poll_table* pt = &wait->pt;
+	ktime_t expire, *to = NULL;
+	int timed_out = 0, count = 0;
+	unsigned long slack = 0;
 
 	/* Optimise the no-wait case */
-	if (!(*timeout))
+	if (end_time && !end_time->tv_sec && !end_time->tv_nsec) {
 		pt = NULL;
+		timed_out = 1;
+	}
+
+	if (end_time && !timed_out)
+		slack = estimate_accuracy(end_time);
 
 	for (;;) {
 		struct poll_list *walk;
-		long __timeout;
 
 		set_current_state(TASK_INTERRUPTIBLE);
 		for (walk = list; walk != NULL; walk = walk->next) {
@@ -617,27 +695,21 @@ static int do_poll(unsigned int nfds,  struct poll_list *list,
 			if (signal_pending(current))
 				count = -EINTR;
 		}
-		if (count || !*timeout)
+		if (count || timed_out)
 			break;
 
-		if (*timeout < 0) {
-			/* Wait indefinitely */
-			__timeout = MAX_SCHEDULE_TIMEOUT;
-		} else if (unlikely(*timeout >= (s64)MAX_SCHEDULE_TIMEOUT-1)) {
-			/*
-			 * Wait for longer than MAX_SCHEDULE_TIMEOUT. Do it in
-			 * a loop
-			 */
-			__timeout = MAX_SCHEDULE_TIMEOUT - 1;
-			*timeout -= __timeout;
-		} else {
-			__timeout = *timeout;
-			*timeout = 0;
+		/*
+		 * If this is the first loop and we have a timeout
+		 * given, then we convert to ktime_t and set the to
+		 * pointer to the expiry value.
+		 */
+		if (end_time && !to) {
+			expire = timespec_to_ktime(*end_time);
+			to = &expire;
 		}
 
-		__timeout = schedule_timeout(__timeout);
-		if (*timeout >= 0)
-			*timeout += __timeout;
+		if (!schedule_hrtimeout_range(to, slack, HRTIMER_MODE_ABS))
+			timed_out = 1;
 	}
 	__set_current_state(TASK_RUNNING);
 	return count;
@@ -646,7 +718,8 @@ static int do_poll(unsigned int nfds,  struct poll_list *list,
 #define N_STACK_PPS ((sizeof(stack_pps) - sizeof(struct poll_list))  / \
 			sizeof(struct pollfd))
 
-int do_sys_poll(struct pollfd __user *ufds, unsigned int nfds, s64 *timeout)
+int do_sys_poll(struct pollfd __user *ufds, unsigned int nfds,
+		struct timespec *end_time)
 {
 	struct poll_wqueues table;
  	int err = -EFAULT, fdcount, len, size;
@@ -686,7 +759,7 @@ int do_sys_poll(struct pollfd __user *ufds, unsigned int nfds, s64 *timeout)
 	}
 
 	poll_initwait(&table);
-	fdcount = do_poll(nfds, head, &table, timeout);
+	fdcount = do_poll(nfds, head, &table, end_time);
 	poll_freewait(&table);
 
 	for (walk = head; walk; walk = walk->next) {
@@ -712,16 +785,21 @@ out_fds:
 
 static long do_restart_poll(struct restart_block *restart_block)
 {
-	struct pollfd __user *ufds = (struct pollfd __user*)restart_block->arg0;
-	int nfds = restart_block->arg1;
-	s64 timeout = ((s64)restart_block->arg3<<32) | (s64)restart_block->arg2;
+	struct pollfd __user *ufds = restart_block->poll.ufds;
+	int nfds = restart_block->poll.nfds;
+	struct timespec *to = NULL, end_time;
 	int ret;
 
-	ret = do_sys_poll(ufds, nfds, &timeout);
+	if (restart_block->poll.has_timeout) {
+		end_time.tv_sec = restart_block->poll.tv_sec;
+		end_time.tv_nsec = restart_block->poll.tv_nsec;
+		to = &end_time;
+	}
+
+	ret = do_sys_poll(ufds, nfds, to);
+
 	if (ret == -EINTR) {
 		restart_block->fn = do_restart_poll;
-		restart_block->arg2 = timeout & 0xFFFFFFFF;
-		restart_block->arg3 = (u64)timeout >> 32;
 		ret = -ERESTART_RESTARTBLOCK;
 	}
 	return ret;
@@ -730,31 +808,32 @@ static long do_restart_poll(struct restart_block *restart_block)
 asmlinkage long sys_poll(struct pollfd __user *ufds, unsigned int nfds,
 			long timeout_msecs)
 {
-	s64 timeout_jiffies;
+	struct timespec end_time, *to = NULL;
 	int ret;
 
-	if (timeout_msecs > 0) {
-#if HZ > 1000
-		/* We can only overflow if HZ > 1000 */
-		if (timeout_msecs / 1000 > (s64)0x7fffffffffffffffULL / (s64)HZ)
-			timeout_jiffies = -1;
-		else
-#endif
-			timeout_jiffies = msecs_to_jiffies(timeout_msecs) + 1;
-	} else {
-		/* Infinite (< 0) or no (0) timeout */
-		timeout_jiffies = timeout_msecs;
+	if (timeout_msecs >= 0) {
+		to = &end_time;
+		poll_select_set_timeout(to, timeout_msecs / MSEC_PER_SEC,
+			NSEC_PER_MSEC * (timeout_msecs % MSEC_PER_SEC));
 	}
 
-	ret = do_sys_poll(ufds, nfds, &timeout_jiffies);
+	ret = do_sys_poll(ufds, nfds, to);
+
 	if (ret == -EINTR) {
 		struct restart_block *restart_block;
+
 		restart_block = &current_thread_info()->restart_block;
 		restart_block->fn = do_restart_poll;
-		restart_block->arg0 = (unsigned long)ufds;
-		restart_block->arg1 = nfds;
-		restart_block->arg2 = timeout_jiffies & 0xFFFFFFFF;
-		restart_block->arg3 = (u64)timeout_jiffies >> 32;
+		restart_block->poll.ufds = ufds;
+		restart_block->poll.nfds = nfds;
+
+		if (timeout_msecs >= 0) {
+			restart_block->poll.tv_sec = end_time.tv_sec;
+			restart_block->poll.tv_nsec = end_time.tv_nsec;
+			restart_block->poll.has_timeout = 1;
+		} else
+			restart_block->poll.has_timeout = 0;
+
 		ret = -ERESTART_RESTARTBLOCK;
 	}
 	return ret;
@@ -766,21 +845,16 @@ asmlinkage long sys_ppoll(struct pollfd __user *ufds, unsigned int nfds,
 	size_t sigsetsize)
 {
 	sigset_t ksigmask, sigsaved;
-	struct timespec ts;
-	s64 timeout = -1;
+	struct timespec ts, end_time, *to = NULL;
 	int ret;
 
 	if (tsp) {
 		if (copy_from_user(&ts, tsp, sizeof(ts)))
 			return -EFAULT;
 
-		/* Cast to u64 to make GCC stop complaining */
-		if ((u64)ts.tv_sec >= (u64)MAX_INT64_SECONDS)
-			timeout = -1;	/* infinite */
-		else {
-			timeout = DIV_ROUND_UP(ts.tv_nsec, NSEC_PER_SEC/HZ);
-			timeout += ts.tv_sec * HZ;
-		}
+		to = &end_time;
+		if (poll_select_set_timeout(to, ts.tv_sec, ts.tv_nsec))
+			return -EINVAL;
 	}
 
 	if (sigmask) {
@@ -794,7 +868,7 @@ asmlinkage long sys_ppoll(struct pollfd __user *ufds, unsigned int nfds,
 		sigprocmask(SIG_SETMASK, &ksigmask, &sigsaved);
 	}
 
-	ret = do_sys_poll(ufds, nfds, &timeout);
+	ret = do_sys_poll(ufds, nfds, to);
 
 	/* We can restart this syscall, usually */
 	if (ret == -EINTR) {
@@ -812,31 +886,7 @@ asmlinkage long sys_ppoll(struct pollfd __user *ufds, unsigned int nfds,
 	} else if (sigmask)
 		sigprocmask(SIG_SETMASK, &sigsaved, NULL);
 
-	if (tsp && timeout >= 0) {
-		struct timespec rts;
-
-		if (current->personality & STICKY_TIMEOUTS)
-			goto sticky;
-		/* Yes, we know it's actually an s64, but it's also positive. */
-		rts.tv_nsec = jiffies_to_usecs(do_div((*(u64*)&timeout), HZ)) *
-						1000;
-		rts.tv_sec = timeout;
-		if (timespec_compare(&rts, &ts) >= 0)
-			rts = ts;
-		if (copy_to_user(tsp, &rts, sizeof(rts))) {
-		sticky:
-			/*
-			 * If an application puts its timeval in read-only
-			 * memory, we don't want the Linux-specific update to
-			 * the timeval to cause a fault after the select has
-			 * completed successfully. However, because we're not
-			 * updating the timeval, we can't restart the system
-			 * call.
-			 */
-			if (ret == -ERESTARTNOHAND && timeout >= 0)
-				ret = -EINTR;
-		}
-	}
+	ret = poll_select_copy_remaining(&end_time, tsp, 0, ret);
 
 	return ret;
 }
diff --git a/fs/timerfd.c b/fs/timerfd.c
index c502c60e4f5..0862f0e49d0 100644
--- a/fs/timerfd.c
+++ b/fs/timerfd.c
@@ -52,11 +52,9 @@ static enum hrtimer_restart timerfd_tmrproc(struct hrtimer *htmr)
 
 static ktime_t timerfd_get_remaining(struct timerfd_ctx *ctx)
 {
-	ktime_t now, remaining;
-
-	now = ctx->tmr.base->get_time();
-	remaining = ktime_sub(ctx->tmr.expires, now);
+	ktime_t remaining;
 
+	remaining = hrtimer_expires_remaining(&ctx->tmr);
 	return remaining.tv64 < 0 ? ktime_set(0, 0): remaining;
 }
 
@@ -74,7 +72,7 @@ static void timerfd_setup(struct timerfd_ctx *ctx, int flags,
 	ctx->ticks = 0;
 	ctx->tintv = timespec_to_ktime(ktmr->it_interval);
 	hrtimer_init(&ctx->tmr, ctx->clockid, htmode);
-	ctx->tmr.expires = texp;
+	hrtimer_set_expires(&ctx->tmr, texp);
 	ctx->tmr.function = timerfd_tmrproc;
 	if (texp.tv64 != 0)
 		hrtimer_start(&ctx->tmr, texp, htmode);