summaryrefslogtreecommitdiffstats
path: root/include/asm-arm/arch-ixp4xx
diff options
context:
space:
mode:
Diffstat (limited to 'include/asm-arm/arch-ixp4xx')
-rw-r--r--include/asm-arm/arch-ixp4xx/coyote.h36
-rw-r--r--include/asm-arm/arch-ixp4xx/debug-macro.S34
-rw-r--r--include/asm-arm/arch-ixp4xx/dma.h26
-rw-r--r--include/asm-arm/arch-ixp4xx/entry-macro.S39
-rw-r--r--include/asm-arm/arch-ixp4xx/gtwx5715.h120
-rw-r--r--include/asm-arm/arch-ixp4xx/hardware.h48
-rw-r--r--include/asm-arm/arch-ixp4xx/io.h388
-rw-r--r--include/asm-arm/arch-ixp4xx/irq.h13
-rw-r--r--include/asm-arm/arch-ixp4xx/irqs.h96
-rw-r--r--include/asm-arm/arch-ixp4xx/ixdp425.h38
-rw-r--r--include/asm-arm/arch-ixp4xx/ixp4xx-regs.h591
-rw-r--r--include/asm-arm/arch-ixp4xx/memory.h61
-rw-r--r--include/asm-arm/arch-ixp4xx/param.h3
-rw-r--r--include/asm-arm/arch-ixp4xx/platform.h126
-rw-r--r--include/asm-arm/arch-ixp4xx/prpmc1100.h33
-rw-r--r--include/asm-arm/arch-ixp4xx/system.h42
-rw-r--r--include/asm-arm/arch-ixp4xx/timex.h13
-rw-r--r--include/asm-arm/arch-ixp4xx/uncompress.h64
-rw-r--r--include/asm-arm/arch-ixp4xx/vmalloc.h17
19 files changed, 1788 insertions, 0 deletions
diff --git a/include/asm-arm/arch-ixp4xx/coyote.h b/include/asm-arm/arch-ixp4xx/coyote.h
new file mode 100644
index 00000000000..dd0c2d2d850
--- /dev/null
+++ b/include/asm-arm/arch-ixp4xx/coyote.h
@@ -0,0 +1,36 @@
+/*
+ * include/asm-arm/arch-ixp4xx/coyote.h
+ *
+ * ADI Engineering platform specific definitions
+ *
+ * Author: Deepak Saxena <dsaxena@plexity.net>
+ *
+ * Copyright 2004 (c) MontaVista, Software, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H__
+#error "Do not include this directly, instead #include <asm/hardware.h>"
+#endif
+
+#define COYOTE_FLASH_BASE IXP4XX_EXP_BUS_CS0_BASE_PHYS
+#define COYOTE_FLASH_SIZE IXP4XX_EXP_BUS_CSX_REGION_SIZE * 2
+
+/* PCI controller GPIO to IRQ pin mappings */
+#define COYOTE_PCI_SLOT0_PIN 6
+#define COYOTE_PCI_SLOT1_PIN 11
+
+#define COYOTE_PCI_SLOT0_DEVID 14
+#define COYOTE_PCI_SLOT1_DEVID 15
+
+#define COYOTE_IDE_BASE_PHYS IXP4XX_EXP_BUS_CS3_BASE_PHYS
+#define COYOTE_IDE_BASE_VIRT 0xFFFE1000
+#define COYOTE_IDE_REGION_SIZE 0x1000
+
+#define COYOTE_IDE_DATA_PORT 0xFFFE10E0
+#define COYOTE_IDE_CTRL_PORT 0xFFFE10FC
+#define COYOTE_IDE_ERROR_PORT 0xFFFE10E2
+
diff --git a/include/asm-arm/arch-ixp4xx/debug-macro.S b/include/asm-arm/arch-ixp4xx/debug-macro.S
new file mode 100644
index 00000000000..4499ae8e4b4
--- /dev/null
+++ b/include/asm-arm/arch-ixp4xx/debug-macro.S
@@ -0,0 +1,34 @@
+/* linux/include/asm-arm/arch-ixp4xx/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ * Copyright (C) 1994-1999 Russell King
+ * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+ .macro addruart,rx
+ mrc p15, 0, \rx, c1, c0
+ tst \rx, #1 @ MMU enabled?
+ moveq \rx, #0xc8000000
+ movne \rx, #0xff000000
+ add \rx,\rx,#3 @ Uart regs are at off set of 3 if
+ @ byte writes used - Big Endian.
+ .endm
+
+ .macro senduart,rd,rx
+ strb \rd, [\rx]
+ .endm
+
+ .macro waituart,rd,rx
+1002: ldrb \rd, [\rx, #0x14]
+ and \rd, \rd, #0x60 @ check THRE and TEMT bits
+ teq \rd, #0x60
+ bne 1002b
+ .endm
+
+ .macro busyuart,rd,rx
+ .endm
diff --git a/include/asm-arm/arch-ixp4xx/dma.h b/include/asm-arm/arch-ixp4xx/dma.h
new file mode 100644
index 00000000000..312065dc0e7
--- /dev/null
+++ b/include/asm-arm/arch-ixp4xx/dma.h
@@ -0,0 +1,26 @@
+/*
+ * include/asm-arm/arch-ixp4xx/dma.h
+ *
+ * Copyright (C) 2001-2004 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#ifndef __ASM_ARCH_DMA_H
+#define __ASM_ARCH_DMA_H
+
+#include <linux/config.h>
+#include <linux/device.h>
+#include <linux/pci.h>
+#include <asm/page.h>
+#include <asm/sizes.h>
+#include <asm/hardware.h>
+
+#define MAX_DMA_ADDRESS (PAGE_OFFSET + SZ_64M)
+
+/* No DMA */
+#define MAX_DMA_CHANNELS 0
+
+#endif /* _ASM_ARCH_DMA_H */
diff --git a/include/asm-arm/arch-ixp4xx/entry-macro.S b/include/asm-arm/arch-ixp4xx/entry-macro.S
new file mode 100644
index 00000000000..455da64832d
--- /dev/null
+++ b/include/asm-arm/arch-ixp4xx/entry-macro.S
@@ -0,0 +1,39 @@
+/*
+ * include/asm-arm/arch-ixp4xx/entry-macro.S
+ *
+ * Low-level IRQ helper macros for IXP4xx-based platforms
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+ .macro disable_fiq
+ .endm
+
+ .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
+ ldr \irqstat, =(IXP4XX_INTC_BASE_VIRT+IXP4XX_ICIP_OFFSET)
+ ldr \irqstat, [\irqstat] @ get interrupts
+ cmp \irqstat, #0
+ beq 1001f
+ clz \irqnr, \irqstat
+ mov \base, #31
+ subs \irqnr, \base, \irqnr
+
+1001:
+ /*
+ * IXP465 has an upper IRQ status register
+ */
+#if defined(CONFIG_CPU_IXP46X)
+ bne 1002f
+ ldr \irqstat, =(IXP4XX_INTC_BASE_VIRT+IXP4XX_ICIP2_OFFSET)
+ ldr \irqstat, [\irqstat] @ get upper interrupts
+ mov \irqnr, #63
+ clz \irqstat, \irqstat
+ cmp \irqstat, #32
+ subne \irqnr, \irqnr, \irqstat
+1002:
+#endif
+ .endm
+
+
diff --git a/include/asm-arm/arch-ixp4xx/gtwx5715.h b/include/asm-arm/arch-ixp4xx/gtwx5715.h
new file mode 100644
index 00000000000..fc460af7062
--- /dev/null
+++ b/include/asm-arm/arch-ixp4xx/gtwx5715.h
@@ -0,0 +1,120 @@
+/*
+ * include/asm-arm/arch-ixp4xx/gtwx5715.h
+ *
+ * Gemtek GTWX5715 Gateway (Linksys WRV54G)
+ *
+ * Copyright 2004 (c) George T. Joseph
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H__
+#error "Do not include this directly, instead #include <asm/hardware.h>"
+#endif
+#include "irqs.h"
+
+#define GTWX5715_GPIO0 0
+#define GTWX5715_GPIO1 1
+#define GTWX5715_GPIO2 2
+#define GTWX5715_GPIO3 3
+#define GTWX5715_GPIO4 4
+#define GTWX5715_GPIO5 5
+#define GTWX5715_GPIO6 6
+#define GTWX5715_GPIO7 7
+#define GTWX5715_GPIO8 8
+#define GTWX5715_GPIO9 9
+#define GTWX5715_GPIO10 10
+#define GTWX5715_GPIO11 11
+#define GTWX5715_GPIO12 12
+#define GTWX5715_GPIO13 13
+#define GTWX5715_GPIO14 14
+
+#define GTWX5715_GPIO0_IRQ IRQ_IXP4XX_GPIO0
+#define GTWX5715_GPIO1_IRQ IRQ_IXP4XX_GPIO1
+#define GTWX5715_GPIO2_IRQ IRQ_IXP4XX_GPIO2
+#define GTWX5715_GPIO3_IRQ IRQ_IXP4XX_GPIO3
+#define GTWX5715_GPIO4_IRQ IRQ_IXP4XX_GPIO4
+#define GTWX5715_GPIO5_IRQ IRQ_IXP4XX_GPIO5
+#define GTWX5715_GPIO6_IRQ IRQ_IXP4XX_GPIO6
+#define GTWX5715_GPIO7_IRQ IRQ_IXP4XX_GPIO7
+#define GTWX5715_GPIO8_IRQ IRQ_IXP4XX_GPIO8
+#define GTWX5715_GPIO9_IRQ IRQ_IXP4XX_GPIO9
+#define GTWX5715_GPIO10_IRQ IRQ_IXP4XX_GPIO10
+#define GTWX5715_GPIO11_IRQ IRQ_IXP4XX_GPIO11
+#define GTWX5715_GPIO12_IRQ IRQ_IXP4XX_GPIO12
+#define GTWX5715_GPIO13_IRQ IRQ_IXP4XX_SW_INT1
+#define GTWX5715_GPIO14_IRQ IRQ_IXP4XX_SW_INT2
+
+
+#define GTWX5715_FLASH_BASE IXP4XX_EXP_BUS_CS0_BASE_PHYS
+#define GTWX5715_FLASH_SIZE (0x00800000)
+
+/* PCI controller GPIO to IRQ pin mappings
+
+ INTA INTB
+SLOT 0 10 11
+SLOT 1 11 10
+
+*/
+
+#define GTWX5715_PCI_SLOT0_DEVID 0
+#define GTWX5715_PCI_SLOT0_INTA_GPIO GTWX5715_GPIO10
+#define GTWX5715_PCI_SLOT0_INTB_GPIO GTWX5715_GPIO11
+#define GTWX5715_PCI_SLOT0_INTA_IRQ GTWX5715_GPIO10_IRQ
+#define GTWX5715_PCI_SLOT0_INTB_IRQ GTWX5715_GPIO11_IRQ
+
+#define GTWX5715_PCI_SLOT1_DEVID 1
+#define GTWX5715_PCI_SLOT1_INTA_GPIO GTWX5715_GPIO11
+#define GTWX5715_PCI_SLOT1_INTB_GPIO GTWX5715_GPIO10
+#define GTWX5715_PCI_SLOT1_INTA_IRQ GTWX5715_GPIO11_IRQ
+#define GTWX5715_PCI_SLOT1_INTB_IRQ GTWX5715_GPIO10_IRQ
+
+#define GTWX5715_PCI_SLOT_COUNT 2
+#define GTWX5715_PCI_INT_PIN_COUNT 2
+
+/*
+ * GPIO 5,6,7 and12 are hard wired to the Kendin KS8995M Switch
+ * and operate as an SPI type interface. The details of the interface
+ * are available on Kendin/Micrel's web site.
+ */
+
+#define GTWX5715_KSSPI_SELECT GTWX5715_GPIO5
+#define GTWX5715_KSSPI_TXD GTWX5715_GPIO6
+#define GTWX5715_KSSPI_CLOCK GTWX5715_GPIO7
+#define GTWX5715_KSSPI_RXD GTWX5715_GPIO12
+
+/*
+ * The "reset" button is wired to GPIO 3.
+ * The GPIO is brought "low" when the button is pushed.
+ */
+
+#define GTWX5715_BUTTON_GPIO GTWX5715_GPIO3
+#define GTWX5715_BUTTON_IRQ GTWX5715_GPIO3_IRQ
+
+/*
+ * Board Label Front Label
+ * LED1 Power
+ * LED2 Wireless-G
+ * LED3 not populated but could be
+ * LED4 Internet
+ * LED5 - LED8 Controlled by KS8995M Switch
+ * LED9 DMZ
+ */
+
+#define GTWX5715_LED1_GPIO GTWX5715_GPIO2
+#define GTWX5715_LED2_GPIO GTWX5715_GPIO9
+#define GTWX5715_LED3_GPIO GTWX5715_GPIO8
+#define GTWX5715_LED4_GPIO GTWX5715_GPIO1
+#define GTWX5715_LED9_GPIO GTWX5715_GPIO4
diff --git a/include/asm-arm/arch-ixp4xx/hardware.h b/include/asm-arm/arch-ixp4xx/hardware.h
new file mode 100644
index 00000000000..4ac964b9078
--- /dev/null
+++ b/include/asm-arm/arch-ixp4xx/hardware.h
@@ -0,0 +1,48 @@
+/*
+ * include/asm-arm/arch-ixp4xx/hardware.h
+ *
+ * Copyright (C) 2002 Intel Corporation.
+ * Copyright (C) 2003-2004 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+/*
+ * Hardware definitions for IXP4xx based systems
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H__
+#define __ASM_ARCH_HARDWARE_H__
+
+#define PCIBIOS_MIN_IO 0x00001000
+#define PCIBIOS_MIN_MEM 0x48000000
+
+/*
+ * We override the standard dma-mask routines for bouncing.
+ */
+#define HAVE_ARCH_PCI_SET_DMA_MASK
+
+#define pcibios_assign_all_busses() 1
+
+#if defined(CONFIG_CPU_IXP465) && !defined(__ASSEMBLY__)
+extern unsigned int processor_id;
+#define cpu_is_ixp465() ((processor_id & 0xffffffc0) == 0x69054200)
+#else
+#define cpu_is_ixp465() (0)
+#endif
+
+/* Register locations and bits */
+#include "ixp4xx-regs.h"
+
+/* Platform helper functions and definitions */
+#include "platform.h"
+
+/* Platform specific details */
+#include "ixdp425.h"
+#include "coyote.h"
+#include "prpmc1100.h"
+
+#endif /* _ASM_ARCH_HARDWARE_H */
diff --git a/include/asm-arm/arch-ixp4xx/io.h b/include/asm-arm/arch-ixp4xx/io.h
new file mode 100644
index 00000000000..c27b9d3079a
--- /dev/null
+++ b/include/asm-arm/arch-ixp4xx/io.h
@@ -0,0 +1,388 @@
+/*
+ * linux/include/asm-arm/arch-ixp4xx/io.h
+ *
+ * Author: Deepak Saxena <dsaxena@plexity.net>
+ *
+ * Copyright (C) 2002-2004 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#include <asm/hardware.h>
+
+#define IO_SPACE_LIMIT 0xffff0000
+
+#define BIT(x) ((1)<<(x))
+
+
+extern int (*ixp4xx_pci_read)(u32 addr, u32 cmd, u32* data);
+extern int ixp4xx_pci_write(u32 addr, u32 cmd, u32 data);
+
+
+/*
+ * IXP4xx provides two methods of accessing PCI memory space:
+ *
+ * 1) A direct mapped window from 0x48000000 to 0x4bffffff (64MB).
+ * To access PCI via this space, we simply ioremap() the BAR
+ * into the kernel and we can use the standard read[bwl]/write[bwl]
+ * macros. This is the preffered method due to speed but it
+ * limits the system to just 64MB of PCI memory. This can be
+ * problamatic if using video cards and other memory-heavy
+ * targets.
+ *
+ * 2) If > 64MB of memory space is required, the IXP4xx can be configured
+ * to use indirect registers to access PCI (as we do below for I/O
+ * transactions). This allows for up to 128MB (0x48000000 to 0x4fffffff)
+ * of memory on the bus. The disadvantadge of this is that every
+ * PCI access requires three local register accesses plus a spinlock,
+ * but in some cases the performance hit is acceptable. In addition,
+ * you cannot mmap() PCI devices in this case.
+ *
+ */
+#ifndef CONFIG_IXP4XX_INDIRECT_PCI
+
+#define __mem_pci(a) (a)
+
+#else
+
+#include <linux/mm.h>
+
+/*
+ * In the case of using indirect PCI, we simply return the actual PCI
+ * address and our read/write implementation use that to drive the
+ * access registers. If something outside of PCI is ioremap'd, we
+ * fallback to the default.
+ */
+static inline void __iomem *
+__ixp4xx_ioremap(unsigned long addr, size_t size, unsigned long flags, unsigned long align)
+{
+ extern void __iomem * __ioremap(unsigned long, size_t, unsigned long, unsigned long);
+ if((addr < 0x48000000) || (addr > 0x4fffffff))
+ return __ioremap(addr, size, flags, align);
+
+ return (void *)addr;
+}
+
+static inline void
+__ixp4xx_iounmap(void __iomem *addr)
+{
+ extern void __iounmap(void __iomem *addr);
+
+ if ((u32)addr >= VMALLOC_START)
+ __iounmap(addr);
+}
+
+#define __arch_ioremap(a, s, f, x) __ixp4xx_ioremap(a, s, f, x)
+#define __arch_iounmap(a) __ixp4xx_iounmap(a)
+
+#define writeb(p, v) __ixp4xx_writeb(p, v)
+#define writew(p, v) __ixp4xx_writew(p, v)
+#define writel(p, v) __ixp4xx_writel(p, v)
+
+#define writesb(p, v, l) __ixp4xx_writesb(p, v, l)
+#define writesw(p, v, l) __ixp4xx_writesw(p, v, l)
+#define writesl(p, v, l) __ixp4xx_writesl(p, v, l)
+
+#define readb(p) __ixp4xx_readb(p)
+#define readw(p) __ixp4xx_readw(p)
+#define readl(p) __ixp4xx_readl(p)
+
+#define readsb(p, v, l) __ixp4xx_readsb(p, v, l)
+#define readsw(p, v, l) __ixp4xx_readsw(p, v, l)
+#define readsl(p, v, l) __ixp4xx_readsl(p, v, l)
+
+static inline void
+__ixp4xx_writeb(u8 value, u32 addr)
+{
+ u32 n, byte_enables, data;
+
+ if (addr >= VMALLOC_START) {
+ __raw_writeb(value, addr);
+ return;
+ }
+
+ n = addr % 4;
+ byte_enables = (0xf & ~BIT(n)) << IXP4XX_PCI_NP_CBE_BESL;
+ data = value << (8*n);
+ ixp4xx_pci_write(addr, byte_enables | NP_CMD_MEMWRITE, data);
+}
+
+static inline void
+__ixp4xx_writesb(u32 bus_addr, u8 *vaddr, int count)
+{
+ while (count--)
+ writeb(*vaddr++, bus_addr);
+}
+
+static inline void
+__ixp4xx_writew(u16 value, u32 addr)
+{
+ u32 n, byte_enables, data;
+
+ if (addr >= VMALLOC_START) {
+ __raw_writew(value, addr);
+ return;
+ }
+
+ n = addr % 4;
+ byte_enables = (0xf & ~(BIT(n) | BIT(n+1))) << IXP4XX_PCI_NP_CBE_BESL;
+ data = value << (8*n);
+ ixp4xx_pci_write(addr, byte_enables | NP_CMD_MEMWRITE, data);
+}
+
+static inline void
+__ixp4xx_writesw(u32 bus_addr, u16 *vaddr, int count)
+{
+ while (count--)
+ writew(*vaddr++, bus_addr);
+}
+
+static inline void
+__ixp4xx_writel(u32 value, u32 addr)
+{
+ if (addr >= VMALLOC_START) {
+ __raw_writel(value, addr);
+ return;
+ }
+
+ ixp4xx_pci_write(addr, NP_CMD_MEMWRITE, value);
+}
+
+static inline void
+__ixp4xx_writesl(u32 bus_addr, u32 *vaddr, int count)
+{
+ while (count--)
+ writel(*vaddr++, bus_addr);
+}
+
+static inline unsigned char
+__ixp4xx_readb(u32 addr)
+{
+ u32 n, byte_enables, data;
+
+ if (addr >= VMALLOC_START)
+ return __raw_readb(addr);
+
+ n = addr % 4;
+ byte_enables = (0xf & ~BIT(n)) << IXP4XX_PCI_NP_CBE_BESL;
+ if (ixp4xx_pci_read(addr, byte_enables | NP_CMD_MEMREAD, &data))
+ return 0xff;
+
+ return data >> (8*n);
+}
+
+static inline void
+__ixp4xx_readsb(u32 bus_addr, u8 *vaddr, u32 count)
+{
+ while (count--)
+ *vaddr++ = readb(bus_addr);
+}
+
+static inline unsigned short
+__ixp4xx_readw(u32 addr)
+{
+ u32 n, byte_enables, data;
+
+ if (addr >= VMALLOC_START)
+ return __raw_readw(addr);
+
+ n = addr % 4;
+ byte_enables = (0xf & ~(BIT(n) | BIT(n+1))) << IXP4XX_PCI_NP_CBE_BESL;
+ if (ixp4xx_pci_read(addr, byte_enables | NP_CMD_MEMREAD, &data))
+ return 0xffff;
+
+ return data>>(8*n);
+}
+
+static inline void
+__ixp4xx_readsw(u32 bus_addr, u16 *vaddr, u32 count)
+{
+ while (count--)
+ *vaddr++ = readw(bus_addr);
+}
+
+static inline unsigned long
+__ixp4xx_readl(u32 addr)
+{
+ u32 data;
+
+ if (addr >= VMALLOC_START)
+ return __raw_readl(addr);
+
+ if (ixp4xx_pci_read(addr, NP_CMD_MEMREAD, &data))
+ return 0xffffffff;
+
+ return data;
+}
+
+static inline void
+__ixp4xx_readsl(u32 bus_addr, u32 *vaddr, u32 count)
+{
+ while (count--)
+ *vaddr++ = readl(bus_addr);
+}
+
+
+/*
+ * We can use the built-in functions b/c they end up calling writeb/readb
+ */
+#define memset_io(c,v,l) _memset_io((c),(v),(l))
+#define memcpy_fromio(a,c,l) _memcpy_fromio((a),(c),(l))
+#define memcpy_toio(c,a,l) _memcpy_toio((c),(a),(l))
+
+#define eth_io_copy_and_sum(s,c,l,b) \
+ eth_copy_and_sum((s),__mem_pci(c),(l),(b))
+
+static inline int
+check_signature(unsigned long bus_addr, const unsigned char *signature,
+ int length)
+{
+ int retval = 0;
+ do {
+ if (readb(bus_addr) != *signature)
+ goto out;
+ bus_addr++;
+ signature++;
+ length--;
+ } while (length);
+ retval = 1;
+out:
+ return retval;
+}
+
+#endif
+
+/*
+ * IXP4xx does not have a transparent cpu -> PCI I/O translation
+ * window. Instead, it has a set of registers that must be tweaked
+ * with the proper byte lanes, command types, and address for the
+ * transaction. This means that we need to override the default
+ * I/O functions.
+ */
+#define outb(p, v) __ixp4xx_outb(p, v)
+#define outw(p, v) __ixp4xx_outw(p, v)
+#define outl(p, v) __ixp4xx_outl(p, v)
+
+#define outsb(p, v, l) __ixp4xx_outsb(p, v, l)
+#define outsw(p, v, l) __ixp4xx_outsw(p, v, l)
+#define outsl(p, v, l) __ixp4xx_outsl(p, v, l)
+
+#define inb(p) __ixp4xx_inb(p)
+#define inw(p) __ixp4xx_inw(p)
+#define inl(p) __ixp4xx_inl(p)
+
+#define insb(p, v, l) __ixp4xx_insb(p, v, l)
+#define insw(p, v, l) __ixp4xx_insw(p, v, l)
+#define insl(p, v, l) __ixp4xx_insl(p, v, l)
+
+
+static inline void
+__ixp4xx_outb(u8 value, u32 addr)
+{
+ u32 n, byte_enables, data;
+ n = addr % 4;
+ byte_enables = (0xf & ~BIT(n)) << IXP4XX_PCI_NP_CBE_BESL;
+ data = value << (8*n);
+ ixp4xx_pci_write(addr, byte_enables | NP_CMD_IOWRITE, data);
+}
+
+static inline void
+__ixp4xx_outsb(u32 io_addr, const u8 *vaddr, u32 count)
+{
+ while (count--)
+ outb(*vaddr++, io_addr);
+}
+
+static inline void
+__ixp4xx_outw(u16 value, u32 addr)
+{
+ u32 n, byte_enables, data;
+ n = addr % 4;
+ byte_enables = (0xf & ~(BIT(n) | BIT(n+1))) << IXP4XX_PCI_NP_CBE_BESL;
+ data = value << (8*n);
+ ixp4xx_pci_write(addr, byte_enables | NP_CMD_IOWRITE, data);
+}
+
+static inline void
+__ixp4xx_outsw(u32 io_addr, const u16 *vaddr, u32 count)
+{
+ while (count--)
+ outw(cpu_to_le16(*vaddr++), io_addr);
+}
+
+static inline void
+__ixp4xx_outl(u32 value, u32 addr)
+{
+ ixp4xx_pci_write(addr, NP_CMD_IOWRITE, value);
+}
+
+static inline void
+__ixp4xx_outsl(u32 io_addr, const u32 *vaddr, u32 count)
+{
+ while (count--)
+ outl(*vaddr++, io_addr);
+}
+
+static inline u8
+__ixp4xx_inb(u32 addr)
+{
+ u32 n, byte_enables, data;
+ n = addr % 4;
+ byte_enables = (0xf & ~BIT(n)) << IXP4XX_PCI_NP_CBE_BESL;
+ if (ixp4xx_pci_read(addr, byte_enables | NP_CMD_IOREAD, &data))
+ return 0xff;
+
+ return data >> (8*n);
+}
+
+static inline void
+__ixp4xx_insb(u32 io_addr, u8 *vaddr, u32 count)
+{
+ while (count--)
+ *vaddr++ = inb(io_addr);
+}
+
+static inline u16
+__ixp4xx_inw(u32 addr)
+{
+ u32 n, byte_enables, data;
+ n = addr % 4;
+ byte_enables = (0xf & ~(BIT(n) | BIT(n+1))) << IXP4XX_PCI_NP_CBE_BESL;
+ if (ixp4xx_pci_read(addr, byte_enables | NP_CMD_IOREAD, &data))
+ return 0xffff;
+
+ return data>>(8*n);
+}
+
+static inline void
+__ixp4xx_insw(u32 io_addr, u16 *vaddr, u32 count)
+{
+ while (count--)
+ *vaddr++ = le16_to_cpu(inw(io_addr));
+}
+
+static inline u32
+__ixp4xx_inl(u32 addr)
+{
+ u32 data;
+ if (ixp4xx_pci_read(addr, NP_CMD_IOREAD, &data))
+ return 0xffffffff;
+
+ return data;
+}
+
+static inline void
+__ixp4xx_insl(u32 io_addr, u32 *vaddr, u32 count)
+{
+ while (count--)
+ *vaddr++ = inl(io_addr);
+}
+
+
+#endif // __ASM_ARM_ARCH_IO_H
+
diff --git a/include/asm-arm/arch-ixp4xx/irq.h b/include/asm-arm/arch-ixp4xx/irq.h
new file mode 100644
index 00000000000..87da70695f0
--- /dev/null
+++ b/include/asm-arm/arch-ixp4xx/irq.h
@@ -0,0 +1,13 @@
+/*
+ * irq.h
+ *
+ * Copyright (C) 2002 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#define fixup_irq(irq) (irq)
+
diff --git a/include/asm-arm/arch-ixp4xx/irqs.h b/include/asm-arm/arch-ixp4xx/irqs.h
new file mode 100644
index 00000000000..ca808281c7f
--- /dev/null
+++ b/include/asm-arm/arch-ixp4xx/irqs.h
@@ -0,0 +1,96 @@
+/*
+ * include/asm-arm/arch-ixp4xx/irqs.h
+ *
+ * IRQ definitions for IXP4XX based systems
+ *
+ * Copyright (C) 2002 Intel Corporation.
+ * Copyright (C) 2003 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef _ARCH_IXP4XX_IRQS_H_
+#define _ARCH_IXP4XX_IRQS_H_
+
+
+#define IRQ_IXP4XX_NPEA 0
+#define IRQ_IXP4XX_NPEB 1
+#define IRQ_IXP4XX_NPEC 2
+#define IRQ_IXP4XX_QM1 3
+#define IRQ_IXP4XX_QM2 4
+#define IRQ_IXP4XX_TIMER1 5
+#define IRQ_IXP4XX_GPIO0 6
+#define IRQ_IXP4XX_GPIO1 7
+#define IRQ_IXP4XX_PCI_INT 8
+#define IRQ_IXP4XX_PCI_DMA1 9
+#define IRQ_IXP4XX_PCI_DMA2 10
+#define IRQ_IXP4XX_TIMER2 11
+#define IRQ_IXP4XX_USB 12
+#define IRQ_IXP4XX_UART2 13
+#define IRQ_IXP4XX_TIMESTAMP 14
+#define IRQ_IXP4XX_UART1 15
+#define IRQ_IXP4XX_WDOG 16
+#define IRQ_IXP4XX_AHB_PMU 17
+#define IRQ_IXP4XX_XSCALE_PMU 18
+#define IRQ_IXP4XX_GPIO2 19
+#define IRQ_IXP4XX_GPIO3 20
+#define IRQ_IXP4XX_GPIO4 21
+#define IRQ_IXP4XX_GPIO5 22
+#define IRQ_IXP4XX_GPIO6 23
+#define IRQ_IXP4XX_GPIO7 24
+#define IRQ_IXP4XX_GPIO8 25
+#define IRQ_IXP4XX_GPIO9 26
+#define IRQ_IXP4XX_GPIO10 27
+#define IRQ_IXP4XX_GPIO11 28
+#define IRQ_IXP4XX_GPIO12 29
+#define IRQ_IXP4XX_SW_INT1 30
+#define IRQ_IXP4XX_SW_INT2 31
+#define IRQ_IXP4XX_USB_HOST 32
+#define IRQ_IXP4XX_I2C 33
+#define IRQ_IXP4XX_SSP 34
+#define IRQ_IXP4XX_TSYNC 35
+#define IRQ_IXP4XX_EAU_DONE 36
+#define IRQ_IXP4XX_SHA_DONE 37
+#define IRQ_IXP4XX_SWCP_PE 58
+#define IRQ_IXP4XX_QM_PE 60
+#define IRQ_IXP4XX_MCU_ECC 61
+#define IRQ_IXP4XX_EXP_PE 62
+
+/*
+ * Only first 32 sources are valid if running on IXP42x systems
+ */
+#ifndef CONFIG_CPU_IXP46X
+#define NR_IRQS 32
+#else
+#define NR_IRQS 64
+#endif
+
+#define XSCALE_PMU_IRQ (IRQ_IXP4XX_XSCALE_PMU)
+
+/*
+ * IXDP425 board IRQs
+ */
+#define IRQ_IXDP425_PCI_INTA IRQ_IXP4XX_GPIO11
+#define IRQ_IXDP425_PCI_INTB IRQ_IXP4XX_GPIO10
+#define IRQ_IXDP425_PCI_INTC IRQ_IXP4XX_GPIO9
+#define IRQ_IXDP425_PCI_INTD IRQ_IXP4XX_GPIO8
+
+/*
+ * PrPMC1100 Board IRQs
+ */
+#define IRQ_PRPMC1100_PCI_INTA IRQ_IXP4XX_GPIO11
+#define IRQ_PRPMC1100_PCI_INTB IRQ_IXP4XX_GPIO10
+#define IRQ_PRPMC1100_PCI_INTC IRQ_IXP4XX_GPIO9
+#define IRQ_PRPMC1100_PCI_INTD IRQ_IXP4XX_GPIO8
+
+/*
+ * ADI Coyote Board IRQs
+ */
+#define IRQ_COYOTE_PCI_SLOT0 IRQ_IXP4XX_GPIO6
+#define IRQ_COYOTE_PCI_SLOT1 IRQ_IXP4XX_GPIO11
+#define IRQ_COYOTE_IDE IRQ_IXP4XX_GPIO5
+
+#endif
diff --git a/include/asm-arm/arch-ixp4xx/ixdp425.h b/include/asm-arm/arch-ixp4xx/ixdp425.h
new file mode 100644
index 00000000000..7d21bf94137
--- /dev/null
+++ b/include/asm-arm/arch-ixp4xx/ixdp425.h
@@ -0,0 +1,38 @@
+/*
+ * include/asm-arm/arch-ixp4xx/ixdp425.h
+ *
+ * IXDP425 platform specific definitions
+ *
+ * Author: Deepak Saxena <dsaxena@plexity.net>
+ *
+ * Copyright 2004 (c) MontaVista, Software, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H__
+#error "Do not include this directly, instead #include <asm/hardware.h>"
+#endif
+
+#define IXDP425_FLASH_BASE IXP4XX_EXP_BUS_CS0_BASE_PHYS
+#define IXDP425_FLASH_SIZE IXP4XX_EXP_BUS_CSX_REGION_SIZE
+
+#define IXDP425_SDA_PIN 7
+#define IXDP425_SCL_PIN 6
+
+/*
+ * IXDP425 PCI IRQs
+ */
+#define IXDP425_PCI_MAX_DEV 4
+#define IXDP425_PCI_IRQ_LINES 4
+
+
+/* PCI controller GPIO to IRQ pin mappings */
+#define IXDP425_PCI_INTA_PIN 11
+#define IXDP425_PCI_INTB_PIN 10
+#define IXDP425_PCI_INTC_PIN 9
+#define IXDP425_PCI_INTD_PIN 8
+
+
diff --git a/include/asm-arm/arch-ixp4xx/ixp4xx-regs.h b/include/asm-arm/arch-ixp4xx/ixp4xx-regs.h
new file mode 100644
index 00000000000..8eeb1db6309
--- /dev/null
+++ b/include/asm-arm/arch-ixp4xx/ixp4xx-regs.h
@@ -0,0 +1,591 @@
+/*
+ * include/asm-arm/arch-ixp4xx/ixp4xx-regs.h
+ *
+ * Register definitions for IXP4xx chipset. This file contains
+ * register location and bit definitions only. Platform specific
+ * definitions and helper function declarations are in platform.h
+ * and machine-name.h.
+ *
+ * Copyright (C) 2002 Intel Corporation.
+ * Copyright (C) 2003-2004 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H__
+#error "Do not include this directly, instead #include <asm/hardware.h>"
+#endif
+
+#ifndef _ASM_ARM_IXP4XX_H_
+#define _ASM_ARM_IXP4XX_H_
+
+/*
+ * IXP4xx Linux Memory Map:
+ *
+ * Phy Size Virt Description
+ * =========================================================================
+ *
+ * 0x00000000 0x10000000(max) PAGE_OFFSET System RAM
+ *
+ * 0x48000000 0x04000000 ioremap'd PCI Memory Space
+ *
+ * 0x50000000 0x10000000 ioremap'd EXP BUS
+ *
+ * 0x6000000 0x00004000 ioremap'd QMgr
+ *
+ * 0xC0000000 0x00001000 0xffbfe000 PCI CFG
+ *
+ * 0xC4000000 0x00001000 0xffbfd000 EXP CFG
+ *
+ * 0xC8000000 0x0000C000 0xffbf2000 On-Chip Peripherals
+ */
+
+/*
+ * Queue Manager
+ */
+#define IXP4XX_QMGR_BASE_PHYS (0x60000000)
+
+/*
+ * Expansion BUS Configuration registers
+ */
+#define IXP4XX_EXP_CFG_BASE_PHYS (0xC4000000)
+#define IXP4XX_EXP_CFG_BASE_VIRT (0xFFBFD000)
+#define IXP4XX_EXP_CFG_REGION_SIZE (0x00001000)
+
+/*
+ * PCI Config registers
+ */
+#define IXP4XX_PCI_CFG_BASE_PHYS (0xC0000000)
+#define IXP4XX_PCI_CFG_BASE_VIRT (0xFFBFE000)
+#define IXP4XX_PCI_CFG_REGION_SIZE (0x00001000)
+
+/*
+ * Peripheral space
+ */
+#define IXP4XX_PERIPHERAL_BASE_PHYS (0xC8000000)
+#define IXP4XX_PERIPHERAL_BASE_VIRT (0xFFBF2000)
+#define IXP4XX_PERIPHERAL_REGION_SIZE (0x0000C000)
+
+#define IXP4XX_EXP_CS0_OFFSET 0x00
+#define IXP4XX_EXP_CS1_OFFSET 0x04
+#define IXP4XX_EXP_CS2_OFFSET 0x08
+#define IXP4XX_EXP_CS3_OFFSET 0x0C
+#define IXP4XX_EXP_CS4_OFFSET 0x10
+#define IXP4XX_EXP_CS5_OFFSET 0x14
+#define IXP4XX_EXP_CS6_OFFSET 0x18
+#define IXP4XX_EXP_CS7_OFFSET 0x1C
+#define IXP4XX_EXP_CFG0_OFFSET 0x20
+#define IXP4XX_EXP_CFG1_OFFSET 0x24
+#define IXP4XX_EXP_CFG2_OFFSET 0x28
+#define IXP4XX_EXP_CFG3_OFFSET 0x2C
+
+/*
+ * Expansion Bus Controller registers.
+ */
+#define IXP4XX_EXP_REG(x) ((volatile u32 *)(IXP4XX_EXP_CFG_BASE_VIRT+(x)))
+
+#define IXP4XX_EXP_CS0 IXP4XX_EXP_REG(IXP4XX_EXP_CS0_OFFSET)
+#define IXP4XX_EXP_CS1 IXP4XX_EXP_REG(IXP4XX_EXP_CS1_OFFSET)
+#define IXP4XX_EXP_CS2 IXP4XX_EXP_REG(IXP4XX_EXP_CS2_OFFSET)
+#define IXP4XX_EXP_CS3 IXP4XX_EXP_REG(IXP4XX_EXP_CS3_OFFSET)
+#define IXP4XX_EXP_CS4 IXP4XX_EXP_REG(IXP4XX_EXP_CS4_OFFSET)
+#define IXP4XX_EXP_CS5 IXP4XX_EXP_REG(IXP4XX_EXP_CS5_OFFSET)
+#define IXP4XX_EXP_CS6 IXP4XX_EXP_REG(IXP4XX_EXP_CS6_OFFSET)
+#define IXP4XX_EXP_CS7 IXP4XX_EXP_REG(IXP4XX_EXP_CS7_OFFSET)
+
+#define IXP4XX_EXP_CFG0 IXP4XX_EXP_REG(IXP4XX_EXP_CFG0_OFFSET)
+#define IXP4XX_EXP_CFG1 IXP4XX_EXP_REG(IXP4XX_EXP_CFG1_OFFSET)
+#define IXP4XX_EXP_CFG2 IXP4XX_EXP_REG(IXP4XX_EXP_CFG2_OFFSET)
+#define IXP4XX_EXP_CFG3 IXP4XX_EXP_REG(IXP4XX_EXP_CFG3_OFFSET)
+
+
+/*
+ * Peripheral Space Register Region Base Addresses
+ */
+#define IXP4XX_UART1_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0x0000)
+#define IXP4XX_UART2_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0x1000)
+#define IXP4XX_PMU_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0x2000)
+#define IXP4XX_INTC_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0x3000)
+#define IXP4XX_GPIO_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0x4000)
+#define IXP4XX_TIMER_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0x5000)
+#define IXP4XX_EthA_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0x9000)
+#define IXP4XX_EthB_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0xA000)
+#define IXP4XX_USB_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0xB000)
+
+#define IXP4XX_UART1_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x0000)
+#define IXP4XX_UART2_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x1000)
+#define IXP4XX_PMU_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x2000)
+#define IXP4XX_INTC_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x3000)
+#define IXP4XX_GPIO_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x4000)
+#define IXP4XX_TIMER_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x5000)
+#define IXP4XX_EthA_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x9000)
+#define IXP4XX_EthB_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0xA000)
+#define IXP4XX_USB_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0xB000)
+
+/*
+ * Constants to make it easy to access Interrupt Controller registers
+ */
+#define IXP4XX_ICPR_OFFSET 0x00 /* Interrupt Status */
+#define IXP4XX_ICMR_OFFSET 0x04 /* Interrupt Enable */
+#define IXP4XX_ICLR_OFFSET 0x08 /* Interrupt IRQ/FIQ Select */
+#define IXP4XX_ICIP_OFFSET 0x0C /* IRQ Status */
+#define IXP4XX_ICFP_OFFSET 0x10 /* FIQ Status */
+#define IXP4XX_ICHR_OFFSET 0x14 /* Interrupt Priority */
+#define IXP4XX_ICIH_OFFSET 0x18 /* IRQ Highest Pri Int */
+#define IXP4XX_ICFH_OFFSET 0x1C /* FIQ Highest Pri Int */
+
+/*
+ * IXP465-only
+ */
+#define IXP4XX_ICPR2_OFFSET 0x20 /* Interrupt Status 2 */
+#define IXP4XX_ICMR2_OFFSET 0x24 /* Interrupt Enable 2 */
+#define IXP4XX_ICLR2_OFFSET 0x28 /* Interrupt IRQ/FIQ Select 2 */
+#define IXP4XX_ICIP2_OFFSET 0x2C /* IRQ Status */
+#define IXP4XX_ICFP2_OFFSET 0x30 /* FIQ Status */
+#define IXP4XX_ICEEN_OFFSET 0x34 /* Error High Pri Enable */
+
+
+/*
+ * Interrupt Controller Register Definitions.
+ */
+
+#define IXP4XX_INTC_REG(x) ((volatile u32 *)(IXP4XX_INTC_BASE_VIRT+(x)))
+
+#define IXP4XX_ICPR IXP4XX_INTC_REG(IXP4XX_ICPR_OFFSET)
+#define IXP4XX_ICMR IXP4XX_INTC_REG(IXP4XX_ICMR_OFFSET)
+#define IXP4XX_ICLR IXP4XX_INTC_REG(IXP4XX_ICLR_OFFSET)
+#define IXP4XX_ICIP IXP4XX_INTC_REG(IXP4XX_ICIP_OFFSET)
+#define IXP4XX_ICFP IXP4XX_INTC_REG(IXP4XX_ICFP_OFFSET)
+#define IXP4XX_ICHR IXP4XX_INTC_REG(IXP4XX_ICHR_OFFSET)
+#define IXP4XX_ICIH IXP4XX_INTC_REG(IXP4XX_ICIH_OFFSET)
+#define IXP4XX_ICFH IXP4XX_INTC_REG(IXP4XX_ICFH_OFFSET)
+#define IXP4XX_ICPR2 IXP4XX_INTC_REG(IXP4XX_ICPR2_OFFSET)
+#define IXP4XX_ICMR2 IXP4XX_INTC_REG(IXP4XX_ICMR2_OFFSET)
+#define IXP4XX_ICLR2 IXP4XX_INTC_REG(IXP4XX_ICLR2_OFFSET)
+#define IXP4XX_ICIP2 IXP4XX_INTC_REG(IXP4XX_ICIP2_OFFSET)
+#define IXP4XX_ICFP2 IXP4XX_INTC_REG(IXP4XX_ICFP2_OFFSET)
+#define IXP4XX_ICEEN IXP4XX_INTC_REG(IXP4XX_ICEEN_OFFSET)
+
+/*
+ * Constants to make it easy to access GPIO registers
+ */
+#define IXP4XX_GPIO_GPOUTR_OFFSET 0x00
+#define IXP4XX_GPIO_GPOER_OFFSET 0x04
+#define IXP4XX_GPIO_GPINR_OFFSET 0x08
+#define IXP4XX_GPIO_GPISR_OFFSET 0x0C
+#define IXP4XX_GPIO_GPIT1R_OFFSET 0x10
+#define IXP4XX_GPIO_GPIT2R_OFFSET 0x14
+#define IXP4XX_GPIO_GPCLKR_OFFSET 0x18
+#define IXP4XX_GPIO_GPDBSELR_OFFSET 0x1C
+
+/*
+ * GPIO Register Definitions.
+ * [Only perform 32bit reads/writes]
+ */
+#define IXP4XX_GPIO_REG(x) ((volatile u32 *)(IXP4XX_GPIO_BASE_VIRT+(x)))
+
+#define IXP4XX_GPIO_GPOUTR IXP4XX_GPIO_REG(IXP4XX_GPIO_GPOUTR_OFFSET)
+#define IXP4XX_GPIO_GPOER IXP4XX_GPIO_REG(IXP4XX_GPIO_GPOER_OFFSET)
+#define IXP4XX_GPIO_GPINR IXP4XX_GPIO_REG(IXP4XX_GPIO_GPINR_OFFSET)
+#define IXP4XX_GPIO_GPISR IXP4XX_GPIO_REG(IXP4XX_GPIO_GPISR_OFFSET)
+#define IXP4XX_GPIO_GPIT1R IXP4XX_GPIO_REG(IXP4XX_GPIO_GPIT1R_OFFSET)
+#define IXP4XX_GPIO_GPIT2R IXP4XX_GPIO_REG(IXP4XX_GPIO_GPIT2R_OFFSET)
+#define IXP4XX_GPIO_GPCLKR IXP4XX_GPIO_REG(IXP4XX_GPIO_GPCLKR_OFFSET)
+#define IXP4XX_GPIO_GPDBSELR IXP4XX_GPIO_REG(IXP4XX_GPIO_GPDBSELR_OFFSET)
+
+/*
+ * GPIO register bit definitions
+ */
+
+/* Interrupt styles
+ */
+#define IXP4XX_GPIO_STYLE_ACTIVE_HIGH 0x0
+#define IXP4XX_GPIO_STYLE_ACTIVE_LOW 0x1
+#define IXP4XX_GPIO_STYLE_RISING_EDGE 0x2
+#define IXP4XX_GPIO_STYLE_FALLING_EDGE 0x3
+#define IXP4XX_GPIO_STYLE_TRANSITIONAL 0x4
+
+/*
+ * Mask used to clear interrupt styles
+ */
+#define IXP4XX_GPIO_STYLE_CLEAR 0x7
+#define IXP4XX_GPIO_STYLE_SIZE 3
+
+/*
+ * Constants to make it easy to access Timer Control/Status registers
+ */
+#define IXP4XX_OSTS_OFFSET 0x00 /* Continious TimeStamp */
+#define IXP4XX_OST1_OFFSET 0x04 /* Timer 1 Timestamp */
+#define IXP4XX_OSRT1_OFFSET 0x08 /* Timer 1 Reload */
+#define IXP4XX_OST2_OFFSET 0x0C /* Timer 2 Timestamp */
+#define IXP4XX_OSRT2_OFFSET 0x10 /* Timer 2 Reload */
+#define IXP4XX_OSWT_OFFSET 0x14 /* Watchdog Timer */
+#define IXP4XX_OSWE_OFFSET 0x18 /* Watchdog Enable */
+#define IXP4XX_OSWK_OFFSET 0x1C /* Watchdog Key */
+#define IXP4XX_OSST_OFFSET 0x20 /* Timer Status */
+
+/*
+ * Operating System Timer Register Definitions.
+ */
+
+#define IXP4XX_TIMER_REG(x) ((volatile u32 *)(IXP4XX_TIMER_BASE_VIRT+(x)))
+
+#define IXP4XX_OSTS IXP4XX_TIMER_REG(IXP4XX_OSTS_OFFSET)
+#define IXP4XX_OST1 IXP4XX_TIMER_REG(IXP4XX_OST1_OFFSET)
+#define IXP4XX_OSRT1 IXP4XX_TIMER_REG(IXP4XX_OSRT1_OFFSET)
+#define IXP4XX_OST2 IXP4XX_TIMER_REG(IXP4XX_OST2_OFFSET)
+#define IXP4XX_OSRT2 IXP4XX_TIMER_REG(IXP4XX_OSRT2_OFFSET)
+#define IXP4XX_OSWT IXP4XX_TIMER_REG(IXP4XX_OSWT_OFFSET)
+#define IXP4XX_OSWE IXP4XX_TIMER_REG(IXP4XX_OSWE_OFFSET)
+#define IXP4XX_OSWK IXP4XX_TIMER_REG(IXP4XX_OSWK_OFFSET)
+#define IXP4XX_OSST IXP4XX_TIMER_REG(IXP4XX_OSST_OFFSET)
+
+/*
+ * Timer register values and bit definitions
+ */
+#define IXP4XX_OST_ENABLE 0x00000001
+#define IXP4XX_OST_ONE_SHOT 0x00000002
+/* Low order bits of reload value ignored */
+#define IXP4XX_OST_RELOAD_MASK 0x00000003
+#define IXP4XX_OST_DISABLED 0x00000000
+#define IXP4XX_OSST_TIMER_1_PEND 0x00000001
+#define IXP4XX_OSST_TIMER_2_PEND 0x00000002
+#define IXP4XX_OSST_TIMER_TS_PEND 0x00000004
+#define IXP4XX_OSST_TIMER_WDOG_PEND 0x00000008
+#define IXP4XX_OSST_TIMER_WARM_RESET 0x00000010
+
+#define IXP4XX_WDT_KEY 0x0000482E
+
+#define IXP4XX_WDT_RESET_ENABLE 0x00000001
+#define IXP4XX_WDT_IRQ_ENABLE 0x00000002
+#define IXP4XX_WDT_COUNT_ENABLE 0x00000004
+
+
+/*
+ * Constants to make it easy to access PCI Control/Status registers
+ */
+#define PCI_NP_AD_OFFSET 0x00
+#define PCI_NP_CBE_OFFSET 0x04
+#define PCI_NP_WDATA_OFFSET 0x08
+#define PCI_NP_RDATA_OFFSET 0x0c
+#define PCI_CRP_AD_CBE_OFFSET 0x10
+#define PCI_CRP_WDATA_OFFSET 0x14
+#define PCI_CRP_RDATA_OFFSET 0x18
+#define PCI_CSR_OFFSET 0x1c
+#define PCI_ISR_OFFSET 0x20
+#define PCI_INTEN_OFFSET 0x24
+#define PCI_DMACTRL_OFFSET 0x28
+#define PCI_AHBMEMBASE_OFFSET 0x2c
+#define PCI_AHBIOBASE_OFFSET 0x30
+#define PCI_PCIMEMBASE_OFFSET 0x34
+#define PCI_AHBDOORBELL_OFFSET 0x38
+#define PCI_PCIDOORBELL_OFFSET 0x3C
+#define PCI_ATPDMA0_AHBADDR_OFFSET 0x40
+#define PCI_ATPDMA0_PCIADDR_OFFSET 0x44
+#define PCI_ATPDMA0_LENADDR_OFFSET 0x48
+#define PCI_ATPDMA1_AHBADDR_OFFSET 0x4C
+#define PCI_ATPDMA1_PCIADDR_OFFSET 0x50
+#define PCI_ATPDMA1_LENADDR_OFFSET 0x54
+
+/*
+ * PCI Control/Status Registers
+ */
+#define IXP4XX_PCI_CSR(x) ((volatile u32 *)(IXP4XX_PCI_CFG_BASE_VIRT+(x)))
+
+#define PCI_NP_AD IXP4XX_PCI_CSR(PCI_NP_AD_OFFSET)
+#define PCI_NP_CBE IXP4XX_PCI_CSR(PCI_NP_CBE_OFFSET)
+#define PCI_NP_WDATA IXP4XX_PCI_CSR(PCI_NP_WDATA_OFFSET)
+#define PCI_NP_RDATA IXP4XX_PCI_CSR(PCI_NP_RDATA_OFFSET)
+#define PCI_CRP_AD_CBE IXP4XX_PCI_CSR(PCI_CRP_AD_CBE_OFFSET)
+#define PCI_CRP_WDATA IXP4XX_PCI_CSR(PCI_CRP_WDATA_OFFSET)
+#define PCI_CRP_RDATA IXP4XX_PCI_CSR(PCI_CRP_RDATA_OFFSET)
+#define PCI_CSR IXP4XX_PCI_CSR(PCI_CSR_OFFSET)
+#define PCI_ISR IXP4XX_PCI_CSR(PCI_ISR_OFFSET)
+#define PCI_INTEN IXP4XX_PCI_CSR(PCI_INTEN_OFFSET)
+#define PCI_DMACTRL IXP4XX_PCI_CSR(PCI_DMACTRL_OFFSET)
+#define PCI_AHBMEMBASE IXP4XX_PCI_CSR(PCI_AHBMEMBASE_OFFSET)
+#define PCI_AHBIOBASE IXP4XX_PCI_CSR(PCI_AHBIOBASE_OFFSET)
+#define PCI_PCIMEMBASE IXP4XX_PCI_CSR(PCI_PCIMEMBASE_OFFSET)
+#define PCI_AHBDOORBELL IXP4XX_PCI_CSR(PCI_AHBDOORBELL_OFFSET)
+#define PCI_PCIDOORBELL IXP4XX_PCI_CSR(PCI_PCIDOORBELL_OFFSET)
+#define PCI_ATPDMA0_AHBADDR IXP4XX_PCI_CSR(PCI_ATPDMA0_AHBADDR_OFFSET)
+#define PCI_ATPDMA0_PCIADDR IXP4XX_PCI_CSR(PCI_ATPDMA0_PCIADDR_OFFSET)
+#define PCI_ATPDMA0_LENADDR IXP4XX_PCI_CSR(PCI_ATPDMA0_LENADDR_OFFSET)
+#define PCI_ATPDMA1_AHBADDR IXP4XX_PCI_CSR(PCI_ATPDMA1_AHBADDR_OFFSET)
+#define PCI_ATPDMA1_PCIADDR IXP4XX_PCI_CSR(PCI_ATPDMA1_PCIADDR_OFFSET)
+#define PCI_ATPDMA1_LENADDR IXP4XX_PCI_CSR(PCI_ATPDMA1_LENADDR_OFFSET)
+
+/*
+ * PCI register values and bit definitions
+ */
+
+/* CSR bit definitions */
+#define PCI_CSR_HOST 0x00000001
+#define PCI_CSR_ARBEN 0x00000002
+#define PCI_CSR_ADS 0x00000004
+#define PCI_CSR_PDS 0x00000008
+#define PCI_CSR_ABE 0x00000010
+#define PCI_CSR_DBT 0x00000020
+#define PCI_CSR_ASE 0x00000100
+#define PCI_CSR_IC 0x00008000
+
+/* ISR (Interrupt status) Register bit definitions */
+#define PCI_ISR_PSE 0x00000001
+#define PCI_ISR_PFE 0x00000002
+#define PCI_ISR_PPE 0x00000004
+#define PCI_ISR_AHBE 0x00000008
+#define PCI_ISR_APDC 0x00000010
+#define PCI_ISR_PADC 0x00000020
+#define PCI_ISR_ADB 0x00000040
+#define PCI_ISR_PDB 0x00000080
+
+/* INTEN (Interrupt Enable) Register bit definitions */
+#define PCI_INTEN_PSE 0x00000001
+#define PCI_INTEN_PFE 0x00000002
+#define PCI_INTEN_PPE 0x00000004
+#define PCI_INTEN_AHBE 0x00000008
+#define PCI_INTEN_APDC 0x00000010
+#define PCI_INTEN_PADC 0x00000020
+#define PCI_INTEN_ADB 0x00000040
+#define PCI_INTEN_PDB 0x00000080
+
+/*
+ * Shift value for byte enable on NP cmd/byte enable register
+ */
+#define IXP4XX_PCI_NP_CBE_BESL 4
+
+/*
+ * PCI commands supported by NP access unit
+ */
+#define NP_CMD_IOREAD 0x2
+#define NP_CMD_IOWRITE 0x3
+#define NP_CMD_CONFIGREAD 0xa
+#define NP_CMD_CONFIGWRITE 0xb
+#define NP_CMD_MEMREAD 0x6
+#define NP_CMD_MEMWRITE 0x7
+
+/*
+ * Constants for CRP access into local config space
+ */
+#define CRP_AD_CBE_BESL 20
+#define CRP_AD_CBE_WRITE 0x00010000
+
+
+/*
+ * USB Device Controller
+ *
+ * These are used by the USB gadget driver, so they don't follow the
+ * IXP4XX_ naming convetions.
+ *
+ */
+# define IXP4XX_USB_REG(x) (*((volatile u32 *)(x)))
+
+/* UDC Undocumented - Reserved1 */
+#define UDC_RES1 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0004)
+/* UDC Undocumented - Reserved2 */
+#define UDC_RES2 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0008)
+/* UDC Undocumented - Reserved3 */
+#define UDC_RES3 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x000C)
+/* UDC Control Register */
+#define UDCCR IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0000)
+/* UDC Endpoint 0 Control/Status Register */
+#define UDCCS0 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0010)
+/* UDC Endpoint 1 (IN) Control/Status Register */
+#define UDCCS1 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0014)
+/* UDC Endpoint 2 (OUT) Control/Status Register */
+#define UDCCS2 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0018)
+/* UDC Endpoint 3 (IN) Control/Status Register */
+#define UDCCS3 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x001C)
+/* UDC Endpoint 4 (OUT) Control/Status Register */
+#define UDCCS4 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0020)
+/* UDC Endpoint 5 (Interrupt) Control/Status Register */
+#define UDCCS5 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0024)
+/* UDC Endpoint 6 (IN) Control/Status Register */
+#define UDCCS6 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0028)
+/* UDC Endpoint 7 (OUT) Control/Status Register */
+#define UDCCS7 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x002C)
+/* UDC Endpoint 8 (IN) Control/Status Register */
+#define UDCCS8 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0030)
+/* UDC Endpoint 9 (OUT) Control/Status Register */
+#define UDCCS9 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0034)
+/* UDC Endpoint 10 (Interrupt) Control/Status Register */
+#define UDCCS10 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0038)
+/* UDC Endpoint 11 (IN) Control/Status Register */
+#define UDCCS11 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x003C)
+/* UDC Endpoint 12 (OUT) Control/Status Register */
+#define UDCCS12 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0040)
+/* UDC Endpoint 13 (IN) Control/Status Register */
+#define UDCCS13 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0044)
+/* UDC Endpoint 14 (OUT) Control/Status Register */
+#define UDCCS14 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0048)
+/* UDC Endpoint 15 (Interrupt) Control/Status Register */
+#define UDCCS15 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x004C)
+/* UDC Frame Number Register High */
+#define UFNRH IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0060)
+/* UDC Frame Number Register Low */
+#define UFNRL IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0064)
+/* UDC Byte Count Reg 2 */
+#define UBCR2 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0068)
+/* UDC Byte Count Reg 4 */
+#define UBCR4 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x006c)
+/* UDC Byte Count Reg 7 */
+#define UBCR7 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0070)
+/* UDC Byte Count Reg 9 */
+#define UBCR9 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0074)
+/* UDC Byte Count Reg 12 */
+#define UBCR12 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0078)
+/* UDC Byte Count Reg 14 */
+#define UBCR14 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x007c)
+/* UDC Endpoint 0 Data Register */
+#define UDDR0 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0080)
+/* UDC Endpoint 1 Data Register */
+#define UDDR1 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0100)
+/* UDC Endpoint 2 Data Register */
+#define UDDR2 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0180)
+/* UDC Endpoint 3 Data Register */
+#define UDDR3 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0200)
+/* UDC Endpoint 4 Data Register */
+#define UDDR4 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0400)
+/* UDC Endpoint 5 Data Register */
+#define UDDR5 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x00A0)
+/* UDC Endpoint 6 Data Register */
+#define UDDR6 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0600)
+/* UDC Endpoint 7 Data Register */
+#define UDDR7 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0680)
+/* UDC Endpoint 8 Data Register */
+#define UDDR8 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0700)
+/* UDC Endpoint 9 Data Register */
+#define UDDR9 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0900)
+/* UDC Endpoint 10 Data Register */
+#define UDDR10 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x00C0)
+/* UDC Endpoint 11 Data Register */
+#define UDDR11 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0B00)
+/* UDC Endpoint 12 Data Register */
+#define UDDR12 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0B80)
+/* UDC Endpoint 13 Data Register */
+#define UDDR13 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0C00)
+/* UDC Endpoint 14 Data Register */
+#define UDDR14 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0E00)
+/* UDC Endpoint 15 Data Register */
+#define UDDR15 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x00E0)
+/* UDC Interrupt Control Register 0 */
+#define UICR0 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0050)
+/* UDC Interrupt Control Register 1 */
+#define UICR1 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0054)
+/* UDC Status Interrupt Register 0 */
+#define USIR0 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0058)
+/* UDC Status Interrupt Register 1 */
+#define USIR1 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x005C)
+
+#define UDCCR_UDE (1 << 0) /* UDC enable */
+#define UDCCR_UDA (1 << 1) /* UDC active */
+#define UDCCR_RSM (1 << 2) /* Device resume */
+#define UDCCR_RESIR (1 << 3) /* Resume interrupt request */
+#define UDCCR_SUSIR (1 << 4) /* Suspend interrupt request */
+#define UDCCR_SRM (1 << 5) /* Suspend/resume interrupt mask */
+#define UDCCR_RSTIR (1 << 6) /* Reset interrupt request */
+#define UDCCR_REM (1 << 7) /* Reset interrupt mask */
+
+#define UDCCS0_OPR (1 << 0) /* OUT packet ready */
+#define UDCCS0_IPR (1 << 1) /* IN packet ready */
+#define UDCCS0_FTF (1 << 2) /* Flush Tx FIFO */
+#define UDCCS0_DRWF (1 << 3) /* Device remote wakeup feature */
+#define UDCCS0_SST (1 << 4) /* Sent stall */
+#define UDCCS0_FST (1 << 5) /* Force stall */
+#define UDCCS0_RNE (1 << 6) /* Receive FIFO no empty */
+#define UDCCS0_SA (1 << 7) /* Setup active */
+
+#define UDCCS_BI_TFS (1 << 0) /* Transmit FIFO service */
+#define UDCCS_BI_TPC (1 << 1) /* Transmit packet complete */
+#define UDCCS_BI_FTF (1 << 2) /* Flush Tx FIFO */
+#define UDCCS_BI_TUR (1 << 3) /* Transmit FIFO underrun */
+#define UDCCS_BI_SST (1 << 4) /* Sent stall */
+#define UDCCS_BI_FST (1 << 5) /* Force stall */
+#define UDCCS_BI_TSP (1 << 7) /* Transmit short packet */
+
+#define UDCCS_BO_RFS (1 << 0) /* Receive FIFO service */
+#define UDCCS_BO_RPC (1 << 1) /* Receive packet complete */
+#define UDCCS_BO_DME (1 << 3) /* DMA enable */
+#define UDCCS_BO_SST (1 << 4) /* Sent stall */
+#define UDCCS_BO_FST (1 << 5) /* Force stall */
+#define UDCCS_BO_RNE (1 << 6) /* Receive FIFO not empty */
+#define UDCCS_BO_RSP (1 << 7) /* Receive short packet */
+
+#define UDCCS_II_TFS (1 << 0) /* Transmit FIFO service */
+#define UDCCS_II_TPC (1 << 1) /* Transmit packet complete */
+#define UDCCS_II_FTF (1 << 2) /* Flush Tx FIFO */
+#define UDCCS_II_TUR (1 << 3) /* Transmit FIFO underrun */
+#define UDCCS_II_TSP (1 << 7) /* Transmit short packet */
+
+#define UDCCS_IO_RFS (1 << 0) /* Receive FIFO service */
+#define UDCCS_IO_RPC (1 << 1) /* Receive packet complete */
+#define UDCCS_IO_ROF (1 << 3) /* Receive overflow */
+#define UDCCS_IO_DME (1 << 3) /* DMA enable */
+#define UDCCS_IO_RNE (1 << 6) /* Receive FIFO not empty */
+#define UDCCS_IO_RSP (1 << 7) /* Receive short packet */
+
+#define UDCCS_INT_TFS (1 << 0) /* Transmit FIFO service */
+#define UDCCS_INT_TPC (1 << 1) /* Transmit packet complete */
+#define UDCCS_INT_FTF (1 << 2) /* Flush Tx FIFO */
+#define UDCCS_INT_TUR (1 << 3) /* Transmit FIFO underrun */
+#define UDCCS_INT_SST (1 << 4) /* Sent stall */
+#define UDCCS_INT_FST (1 << 5) /* Force stall */
+#define UDCCS_INT_TSP (1 << 7) /* Transmit short packet */
+
+#define UICR0_IM0 (1 << 0) /* Interrupt mask ep 0 */
+#define UICR0_IM1 (1 << 1) /* Interrupt mask ep 1 */
+#define UICR0_IM2 (1 << 2) /* Interrupt mask ep 2 */
+#define UICR0_IM3 (1 << 3) /* Interrupt mask ep 3 */
+#define UICR0_IM4 (1 << 4) /* Interrupt mask ep 4 */
+#define UICR0_IM5 (1 << 5) /* Interrupt mask ep 5 */
+#define UICR0_IM6 (1 << 6) /* Interrupt mask ep 6 */
+#define UICR0_IM7 (1 << 7) /* Interrupt mask ep 7 */
+
+#define UICR1_IM8 (1 << 0) /* Interrupt mask ep 8 */
+#define UICR1_IM9 (1 << 1) /* Interrupt mask ep 9 */
+#define UICR1_IM10 (1 << 2) /* Interrupt mask ep 10 */
+#define UICR1_IM11 (1 << 3) /* Interrupt mask ep 11 */
+#define UICR1_IM12 (1 << 4) /* Interrupt mask ep 12 */
+#define UICR1_IM13 (1 << 5) /* Interrupt mask ep 13 */
+#define UICR1_IM14 (1 << 6) /* Interrupt mask ep 14 */
+#define UICR1_IM15 (1 << 7) /* Interrupt mask ep 15 */
+
+#define USIR0_IR0 (1 << 0) /* Interrup request ep 0 */
+#define USIR0_IR1 (1 << 1) /* Interrup request ep 1 */
+#define USIR0_IR2 (1 << 2) /* Interrup request ep 2 */
+#define USIR0_IR3 (1 << 3) /* Interrup request ep 3 */
+#define USIR0_IR4 (1 << 4) /* Interrup request ep 4 */
+#define USIR0_IR5 (1 << 5) /* Interrup request ep 5 */
+#define USIR0_IR6 (1 << 6) /* Interrup request ep 6 */
+#define USIR0_IR7 (1 << 7) /* Interrup request ep 7 */
+
+#define USIR1_IR8 (1 << 0) /* Interrup request ep 8 */
+#define USIR1_IR9 (1 << 1) /* Interrup request ep 9 */
+#define USIR1_IR10 (1 << 2) /* Interrup request ep 10 */
+#define USIR1_IR11 (1 << 3) /* Interrup request ep 11 */
+#define USIR1_IR12 (1 << 4) /* Interrup request ep 12 */
+#define USIR1_IR13 (1 << 5) /* Interrup request ep 13 */
+#define USIR1_IR14 (1 << 6) /* Interrup request ep 14 */
+#define USIR1_IR15 (1 << 7) /* Interrup request ep 15 */
+
+#define DCMD_LENGTH 0x01fff /* length mask (max = 8K - 1) */
+
+#ifndef __ASSEMBLY__
+static inline int cpu_is_ixp46x(void)
+{
+#ifdef CONFIG_CPU_IXP46X
+ unsigned int processor_id;
+
+ asm("mrc p15, 0, %0, cr0, cr0, 0;" : "=r"(processor_id) :);
+
+ if ((processor_id & 0xffffff00) == 0x69054200)
+ return 1;
+#endif
+ return 0;
+}
+#endif
+
+#endif
diff --git a/include/asm-arm/arch-ixp4xx/memory.h b/include/asm-arm/arch-ixp4xx/memory.h
new file mode 100644
index 00000000000..d348548b592
--- /dev/null
+++ b/include/asm-arm/arch-ixp4xx/memory.h
@@ -0,0 +1,61 @@
+/*
+ * linux/include/asm-arm/arch-ixp4xx/memory.h
+ *
+ * Copyright (c) 2001-2004 MontaVista Software, Inc.
+ */
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#include <asm/sizes.h>
+
+/*
+ * Physical DRAM offset.
+ */
+#define PHYS_OFFSET (0x00000000UL)
+
+#ifndef __ASSEMBLY__
+
+/*
+ * Only first 64MB of memory can be accessed via PCI.
+ * We use GFP_DMA to allocate safe buffers to do map/unmap.
+ * This is really ugly and we need a better way of specifying
+ * DMA-capable regions of memory.
+ */
+static inline void __arch_adjust_zones(int node, unsigned long *zone_size,
+ unsigned long *zhole_size)
+{
+ unsigned int sz = SZ_64M >> PAGE_SHIFT;
+
+ /*
+ * Only adjust if > 64M on current system
+ */
+ if (node || (zone_size[0] <= sz))
+ return;
+
+ zone_size[1] = zone_size[0] - sz;
+ zone_size[0] = sz;
+ zhole_size[1] = zhole_size[0];
+ zhole_size[0] = 0;
+}
+
+#define arch_adjust_zones(node, size, holes) \
+ __arch_adjust_zones(node, size, holes)
+
+#define ISA_DMA_THRESHOLD (SZ_64M - 1)
+
+#endif
+
+/*
+ * Virtual view <-> DMA view memory address translations
+ * virt_to_bus: Used to translate the virtual address to an
+ * address suitable to be passed to set_dma_addr
+ * bus_to_virt: Used to convert an address for DMA operations
+ * to an address that the kernel can use.
+ *
+ * These are dummies for now.
+ */
+#define __virt_to_bus(x) __virt_to_phys(x)
+#define __bus_to_virt(x) __phys_to_virt(x)
+
+#endif
diff --git a/include/asm-arm/arch-ixp4xx/param.h b/include/asm-arm/arch-ixp4xx/param.h
new file mode 100644
index 00000000000..8a757125e5e
--- /dev/null
+++ b/include/asm-arm/arch-ixp4xx/param.h
@@ -0,0 +1,3 @@
+/*
+ * linux/include/asm-arm/arch-ixp4xx/param.h
+ */
diff --git a/include/asm-arm/arch-ixp4xx/platform.h b/include/asm-arm/arch-ixp4xx/platform.h
new file mode 100644
index 00000000000..3a626c03ea2
--- /dev/null
+++ b/include/asm-arm/arch-ixp4xx/platform.h
@@ -0,0 +1,126 @@
+/*
+ * include/asm-arm/arch-ixp4xx/platform.h
+ *
+ * Constants and functions that are useful to IXP4xx platform-specific code
+ * and device drivers.
+ *
+ * Copyright (C) 2004 MontaVista Software, Inc.
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H__
+#error "Do not include this directly, instead #include <asm/hardware.h>"
+#endif
+
+#ifndef __ASSEMBLY__
+
+#include <asm/types.h>
+
+#ifndef __ARMEB__
+#define REG_OFFSET 0
+#else
+#define REG_OFFSET 3
+#endif
+
+/*
+ * Expansion bus memory regions
+ */
+#define IXP4XX_EXP_BUS_BASE_PHYS (0x50000000)
+
+#define IXP4XX_EXP_BUS_CSX_REGION_SIZE (0x01000000)
+
+#define IXP4XX_EXP_BUS_CS0_BASE_PHYS (IXP4XX_EXP_BUS_BASE_PHYS + 0x00000000)
+#define IXP4XX_EXP_BUS_CS1_BASE_PHYS (IXP4XX_EXP_BUS_BASE_PHYS + 0x01000000)
+#define IXP4XX_EXP_BUS_CS2_BASE_PHYS (IXP4XX_EXP_BUS_BASE_PHYS + 0x02000000)
+#define IXP4XX_EXP_BUS_CS3_BASE_PHYS (IXP4XX_EXP_BUS_BASE_PHYS + 0x03000000)
+#define IXP4XX_EXP_BUS_CS4_BASE_PHYS (IXP4XX_EXP_BUS_BASE_PHYS + 0x04000000)
+#define IXP4XX_EXP_BUS_CS5_BASE_PHYS (IXP4XX_EXP_BUS_BASE_PHYS + 0x05000000)
+#define IXP4XX_EXP_BUS_CS6_BASE_PHYS (IXP4XX_EXP_BUS_BASE_PHYS + 0x06000000)
+#define IXP4XX_EXP_BUS_CS7_BASE_PHYS (IXP4XX_EXP_BUS_BASE_PHYS + 0x07000000)
+
+#define IXP4XX_FLASH_WRITABLE (0x2)
+#define IXP4XX_FLASH_DEFAULT (0xbcd23c40)
+#define IXP4XX_FLASH_WRITE (0xbcd23c42)
+
+/*
+ * Clock Speed Definitions.
+ */
+#define IXP4XX_PERIPHERAL_BUS_CLOCK (66) /* 66Mhzi APB BUS */
+#define IXP4XX_UART_XTAL 14745600
+
+/*
+ * The IXP4xx chips do not have an I2C unit, so GPIO lines are just
+ * used to
+ * Used as platform_data to provide GPIO pin information to the ixp42x
+ * I2C driver.
+ */
+struct ixp4xx_i2c_pins {
+ unsigned long sda_pin;
+ unsigned long scl_pin;
+};
+
+
+struct sys_timer;
+
+/*
+ * Functions used by platform-level setup code
+ */
+extern void ixp4xx_map_io(void);
+extern void ixp4xx_init_irq(void);
+extern void ixp4xx_sys_init(void);
+extern struct sys_timer ixp4xx_timer;
+extern void ixp4xx_pci_preinit(void);
+struct pci_sys_data;
+extern int ixp4xx_setup(int nr, struct pci_sys_data *sys);
+extern struct pci_bus *ixp4xx_scan_bus(int nr, struct pci_sys_data *sys);
+
+/*
+ * GPIO-functions
+ */
+/*
+ * The following converted to the real HW bits the gpio_line_config
+ */
+/* GPIO pin types */
+#define IXP4XX_GPIO_OUT 0x1
+#define IXP4XX_GPIO_IN 0x2
+
+#define IXP4XX_GPIO_INTSTYLE_MASK 0x7C /* Bits [6:2] define interrupt style */
+
+/*
+ * GPIO interrupt types.
+ */
+#define IXP4XX_GPIO_ACTIVE_HIGH 0x4 /* Default */
+#define IXP4XX_GPIO_ACTIVE_LOW 0x8
+#define IXP4XX_GPIO_RISING_EDGE 0x10
+#define IXP4XX_GPIO_FALLING_EDGE 0x20
+#define IXP4XX_GPIO_TRANSITIONAL 0x40
+
+/* GPIO signal types */
+#define IXP4XX_GPIO_LOW 0
+#define IXP4XX_GPIO_HIGH 1
+
+/* GPIO Clocks */
+#define IXP4XX_GPIO_CLK_0 14
+#define IXP4XX_GPIO_CLK_1 15
+
+extern void gpio_line_config(u8 line, u32 style);
+
+static inline void gpio_line_get(u8 line, int *value)
+{
+ *value = (*IXP4XX_GPIO_GPINR >> line) & 0x1;
+}
+
+static inline void gpio_line_set(u8 line, int value)
+{
+ if (value == IXP4XX_GPIO_HIGH)
+ *IXP4XX_GPIO_GPOUTR |= (1 << line);
+ else if (value == IXP4XX_GPIO_LOW)
+ *IXP4XX_GPIO_GPOUTR &= ~(1 << line);
+}
+
+static inline void gpio_line_isr_clear(u8 line)
+{
+ *IXP4XX_GPIO_GPISR = (1 << line);
+}
+
+#endif // __ASSEMBLY__
+
diff --git a/include/asm-arm/arch-ixp4xx/prpmc1100.h b/include/asm-arm/arch-ixp4xx/prpmc1100.h
new file mode 100644
index 00000000000..e2532ab7f48
--- /dev/null
+++ b/include/asm-arm/arch-ixp4xx/prpmc1100.h
@@ -0,0 +1,33 @@
+/*
+ * include/asm-arm/arch-ixp4xx/prpmc1100.h
+ *
+ * Motorolla PrPMC1100 platform specific definitions
+ *
+ * Author: Deepak Saxena <dsaxena@plexity.net>
+ *
+ * Copyright 2004 (c) MontaVista, Software, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H__
+#error "Do not include this directly, instead #include <asm/hardware.h>"
+#endif
+
+#define PRPMC1100_FLASH_BASE IXP4XX_EXP_BUS_CS0_BASE_PHYS
+#define PRPMC1100_FLASH_SIZE IXP4XX_EXP_BUS_CSX_REGION_SIZE
+
+#define PRPMC1100_PCI_MIN_DEVID 10
+#define PRPMC1100_PCI_MAX_DEVID 16
+#define PRPMC1100_PCI_IRQ_LINES 4
+
+
+/* PCI controller GPIO to IRQ pin mappings */
+#define PRPMC1100_PCI_INTA_PIN 11
+#define PRPMC1100_PCI_INTB_PIN 10
+#define PRPMC1100_PCI_INTC_PIN 9
+#define PRPMC1100_PCI_INTD_PIN 8
+
+
diff --git a/include/asm-arm/arch-ixp4xx/system.h b/include/asm-arm/arch-ixp4xx/system.h
new file mode 100644
index 00000000000..73589aad8dd
--- /dev/null
+++ b/include/asm-arm/arch-ixp4xx/system.h
@@ -0,0 +1,42 @@
+/*
+ * include/asm-arm/arch-ixp4x//system.h
+ *
+ * Copyright (C) 2002 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <asm/hardware.h>
+
+static inline void arch_idle(void)
+{
+#if 0
+ if (!hlt_counter)
+ cpu_do_idle(0);
+#endif
+}
+
+
+static inline void arch_reset(char mode)
+{
+ if ( 1 && mode == 's') {
+ /* Jump into ROM at address 0 */
+ cpu_reset(0);
+ } else {
+ /* Use on-chip reset capability */
+
+ /* set the "key" register to enable access to
+ * "timer" and "enable" registers
+ */
+ *IXP4XX_OSWK = IXP4XX_WDT_KEY;
+
+ /* write 0 to the timer register for an immediate reset */
+ *IXP4XX_OSWT = 0;
+
+ *IXP4XX_OSWE = IXP4XX_WDT_RESET_ENABLE | IXP4XX_WDT_COUNT_ENABLE;
+ }
+}
+
diff --git a/include/asm-arm/arch-ixp4xx/timex.h b/include/asm-arm/arch-ixp4xx/timex.h
new file mode 100644
index 00000000000..38c9d77d372
--- /dev/null
+++ b/include/asm-arm/arch-ixp4xx/timex.h
@@ -0,0 +1,13 @@
+/*
+ * linux/include/asm-arm/arch-ixp4xx/timex.h
+ *
+ */
+
+#include <asm/hardware.h>
+
+/*
+ * We use IXP425 General purpose timer for our timer needs, it runs at
+ * 66.66... MHz
+ */
+#define CLOCK_TICK_RATE (66666666)
+
diff --git a/include/asm-arm/arch-ixp4xx/uncompress.h b/include/asm-arm/arch-ixp4xx/uncompress.h
new file mode 100644
index 00000000000..960c35810a2
--- /dev/null
+++ b/include/asm-arm/arch-ixp4xx/uncompress.h
@@ -0,0 +1,64 @@
+/*
+ * include/asm-arm/arch-ixp4xx/uncompress.h
+ *
+ * Copyright (C) 2002 Intel Corporation.
+ * Copyright (C) 2003-2004 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef _ARCH_UNCOMPRESS_H_
+#define _ARCH_UNCOMPRESS_H_
+
+#include <asm/hardware.h>
+#include <asm/mach-types.h>
+#include <linux/serial_reg.h>
+
+#define TX_DONE (UART_LSR_TEMT|UART_LSR_THRE)
+
+static volatile u32* uart_base;
+
+static __inline__ void putc(char c)
+{
+ /* Check THRE and TEMT bits before we transmit the character.
+ */
+ while ((uart_base[UART_LSR] & TX_DONE) != TX_DONE);
+ *uart_base = c;
+}
+
+/*
+ * This does not append a newline
+ */
+static void putstr(const char *s)
+{
+ while (*s)
+ {
+ putc(*s);
+ if (*s == '\n')
+ putc('\r');
+ s++;
+ }
+}
+
+static __inline__ void __arch_decomp_setup(unsigned long arch_id)
+{
+ /*
+ * Coyote and gtwx5715 only have UART2 connected
+ */
+ if (machine_is_adi_coyote() || machine_is_gtwx5715())
+ uart_base = (volatile u32*) IXP4XX_UART2_BASE_PHYS;
+ else
+ uart_base = (volatile u32*) IXP4XX_UART1_BASE_PHYS;
+}
+
+/*
+ * arch_id is a variable in decompress_kernel()
+ */
+#define arch_decomp_setup() __arch_decomp_setup(arch_id)
+
+#define arch_decomp_wdog()
+
+#endif
diff --git a/include/asm-arm/arch-ixp4xx/vmalloc.h b/include/asm-arm/arch-ixp4xx/vmalloc.h
new file mode 100644
index 00000000000..da46e560ad6
--- /dev/null
+++ b/include/asm-arm/arch-ixp4xx/vmalloc.h
@@ -0,0 +1,17 @@
+/*
+ * linux/include/asm-arm/arch-ixp4xx/vmalloc.h
+ */
+
+/*
+ * Just any arbitrary offset to the start of the vmalloc VM area: the
+ * current 8MB value just means that there will be a 8MB "hole" after the
+ * physical memory until the kernel virtual memory starts. That means that
+ * any out-of-bounds memory accesses will hopefully be caught.
+ * The vmalloc() routines leaves a hole of 4kB between each vmalloced
+ * area for the same reason. ;)
+ */
+#define VMALLOC_OFFSET (8*1024*1024)
+#define VMALLOC_START (((unsigned long)high_memory + VMALLOC_OFFSET) & ~(VMALLOC_OFFSET-1))
+#define VMALLOC_VMADDR(x) ((unsigned long)(x))
+#define VMALLOC_END (0xFF000000)
+