summaryrefslogtreecommitdiffstats
path: root/include/asm-arm/arch-kirkwood/kirkwood.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/asm-arm/arch-kirkwood/kirkwood.h')
-rw-r--r--include/asm-arm/arch-kirkwood/kirkwood.h100
1 files changed, 100 insertions, 0 deletions
diff --git a/include/asm-arm/arch-kirkwood/kirkwood.h b/include/asm-arm/arch-kirkwood/kirkwood.h
new file mode 100644
index 00000000000..bb31b315c35
--- /dev/null
+++ b/include/asm-arm/arch-kirkwood/kirkwood.h
@@ -0,0 +1,100 @@
+/*
+ * include/asm-arm/arch-kirkwood/kirkwood.h
+ *
+ * Generic definitions for Marvell Kirkwood SoC flavors:
+ * 88F6180, 88F6192 and 88F6281.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_KIRKWOOD_H
+#define __ASM_ARCH_KIRKWOOD_H
+
+/*
+ * Marvell Kirkwood address maps.
+ *
+ * phys
+ * e0000000 PCIe Memory space
+ * f1000000 on-chip peripheral registers
+ * f2000000 PCIe I/O space
+ * f3000000 NAND controller address window
+ *
+ * virt phys size
+ * fee00000 f1000000 1M on-chip peripheral registers
+ * fef00000 f2000000 1M PCIe I/O space
+ */
+
+#define KIRKWOOD_NAND_MEM_PHYS_BASE 0xf3000000
+#define KIRKWOOD_NAND_MEM_SIZE SZ_64K /* 1K is sufficient, but 64K
+ * is the minimal window size
+ */
+
+#define KIRKWOOD_PCIE_IO_PHYS_BASE 0xf2000000
+#define KIRKWOOD_PCIE_IO_VIRT_BASE 0xfef00000
+#define KIRKWOOD_PCIE_IO_BUS_BASE 0x00000000
+#define KIRKWOOD_PCIE_IO_SIZE SZ_1M
+
+#define KIRKWOOD_REGS_PHYS_BASE 0xf1000000
+#define KIRKWOOD_REGS_VIRT_BASE 0xfee00000
+#define KIRKWOOD_REGS_SIZE SZ_1M
+
+#define KIRKWOOD_PCIE_MEM_PHYS_BASE 0xe0000000
+#define KIRKWOOD_PCIE_MEM_SIZE SZ_128M
+
+/*
+ * MBUS bridge registers.
+ */
+#define BRIDGE_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x20000)
+#define CPU_CONTROL (BRIDGE_VIRT_BASE | 0x0104)
+#define CPU_RESET 0x00000002
+#define RSTOUTn_MASK (BRIDGE_VIRT_BASE | 0x0108)
+#define SOFT_RESET_OUT_EN 0x00000004
+#define SYSTEM_SOFT_RESET (BRIDGE_VIRT_BASE | 0x010c)
+#define SOFT_RESET 0x00000001
+#define BRIDGE_CAUSE (BRIDGE_VIRT_BASE | 0x0110)
+#define BRIDGE_MASK (BRIDGE_VIRT_BASE | 0x0114)
+#define BRIDGE_INT_TIMER0 0x0002
+#define BRIDGE_INT_TIMER1 0x0004
+#define BRIDGE_INT_TIMER1_CLR (~0x0004)
+#define IRQ_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0200)
+#define IRQ_CAUSE_LOW_OFF 0x0000
+#define IRQ_MASK_LOW_OFF 0x0004
+#define IRQ_CAUSE_HIGH_OFF 0x0010
+#define IRQ_MASK_HIGH_OFF 0x0014
+#define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0300)
+#define L2_CONFIG_REG (BRIDGE_VIRT_BASE | 0x0128)
+#define L2_WRITETHROUGH 0x00000010
+
+/*
+ * Register Map
+ */
+#define DDR_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x00000)
+#define DDR_WINDOW_CPU_BASE (DDR_VIRT_BASE | 0x1500)
+
+#define DEV_BUS_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x10000)
+#define DEV_BUS_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x10000)
+#define SAMPLE_AT_RESET (DEV_BUS_VIRT_BASE | 0x0030)
+#define DEVICE_ID (DEV_BUS_VIRT_BASE | 0x0034)
+#define RTC_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x0300)
+#define SPI_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x0600)
+#define UART0_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x2000)
+#define UART0_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x2000)
+#define UART1_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x2100)
+#define UART1_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x2100)
+
+#define PCIE_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x40000)
+
+#define USB_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x50000)
+
+#define GE00_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x70000)
+#define GE01_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x74000)
+
+#define SATA_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x80000)
+
+
+#define GPIO_MAX 50
+
+
+#endif