summaryrefslogtreecommitdiffstats
path: root/include/asm-arm/arch-pxa/pxa-regs.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/asm-arm/arch-pxa/pxa-regs.h')
-rw-r--r--include/asm-arm/arch-pxa/pxa-regs.h570
1 files changed, 2 insertions, 568 deletions
diff --git a/include/asm-arm/arch-pxa/pxa-regs.h b/include/asm-arm/arch-pxa/pxa-regs.h
index 4b2ea1e95c5..dce9308626b 100644
--- a/include/asm-arm/arch-pxa/pxa-regs.h
+++ b/include/asm-arm/arch-pxa/pxa-regs.h
@@ -600,418 +600,6 @@
/*
- * USB Device Controller
- * PXA25x and PXA27x USB device controller registers are different.
- */
-#if defined(CONFIG_PXA25x)
-
-#define UDC_RES1 __REG(0x40600004) /* UDC Undocumented - Reserved1 */
-#define UDC_RES2 __REG(0x40600008) /* UDC Undocumented - Reserved2 */
-#define UDC_RES3 __REG(0x4060000C) /* UDC Undocumented - Reserved3 */
-
-#define UDCCR __REG(0x40600000) /* UDC Control Register */
-#define UDCCR_UDE (1 << 0) /* UDC enable */
-#define UDCCR_UDA (1 << 1) /* UDC active */
-#define UDCCR_RSM (1 << 2) /* Device resume */
-#define UDCCR_RESIR (1 << 3) /* Resume interrupt request */
-#define UDCCR_SUSIR (1 << 4) /* Suspend interrupt request */
-#define UDCCR_SRM (1 << 5) /* Suspend/resume interrupt mask */
-#define UDCCR_RSTIR (1 << 6) /* Reset interrupt request */
-#define UDCCR_REM (1 << 7) /* Reset interrupt mask */
-
-#define UDCCS0 __REG(0x40600010) /* UDC Endpoint 0 Control/Status Register */
-#define UDCCS0_OPR (1 << 0) /* OUT packet ready */
-#define UDCCS0_IPR (1 << 1) /* IN packet ready */
-#define UDCCS0_FTF (1 << 2) /* Flush Tx FIFO */
-#define UDCCS0_DRWF (1 << 3) /* Device remote wakeup feature */
-#define UDCCS0_SST (1 << 4) /* Sent stall */
-#define UDCCS0_FST (1 << 5) /* Force stall */
-#define UDCCS0_RNE (1 << 6) /* Receive FIFO no empty */
-#define UDCCS0_SA (1 << 7) /* Setup active */
-
-/* Bulk IN - Endpoint 1,6,11 */
-#define UDCCS1 __REG(0x40600014) /* UDC Endpoint 1 (IN) Control/Status Register */
-#define UDCCS6 __REG(0x40600028) /* UDC Endpoint 6 (IN) Control/Status Register */
-#define UDCCS11 __REG(0x4060003C) /* UDC Endpoint 11 (IN) Control/Status Register */
-
-#define UDCCS_BI_TFS (1 << 0) /* Transmit FIFO service */
-#define UDCCS_BI_TPC (1 << 1) /* Transmit packet complete */
-#define UDCCS_BI_FTF (1 << 2) /* Flush Tx FIFO */
-#define UDCCS_BI_TUR (1 << 3) /* Transmit FIFO underrun */
-#define UDCCS_BI_SST (1 << 4) /* Sent stall */
-#define UDCCS_BI_FST (1 << 5) /* Force stall */
-#define UDCCS_BI_TSP (1 << 7) /* Transmit short packet */
-
-/* Bulk OUT - Endpoint 2,7,12 */
-#define UDCCS2 __REG(0x40600018) /* UDC Endpoint 2 (OUT) Control/Status Register */
-#define UDCCS7 __REG(0x4060002C) /* UDC Endpoint 7 (OUT) Control/Status Register */
-#define UDCCS12 __REG(0x40600040) /* UDC Endpoint 12 (OUT) Control/Status Register */
-
-#define UDCCS_BO_RFS (1 << 0) /* Receive FIFO service */
-#define UDCCS_BO_RPC (1 << 1) /* Receive packet complete */
-#define UDCCS_BO_DME (1 << 3) /* DMA enable */
-#define UDCCS_BO_SST (1 << 4) /* Sent stall */
-#define UDCCS_BO_FST (1 << 5) /* Force stall */
-#define UDCCS_BO_RNE (1 << 6) /* Receive FIFO not empty */
-#define UDCCS_BO_RSP (1 << 7) /* Receive short packet */
-
-/* Isochronous IN - Endpoint 3,8,13 */
-#define UDCCS3 __REG(0x4060001C) /* UDC Endpoint 3 (IN) Control/Status Register */
-#define UDCCS8 __REG(0x40600030) /* UDC Endpoint 8 (IN) Control/Status Register */
-#define UDCCS13 __REG(0x40600044) /* UDC Endpoint 13 (IN) Control/Status Register */
-
-#define UDCCS_II_TFS (1 << 0) /* Transmit FIFO service */
-#define UDCCS_II_TPC (1 << 1) /* Transmit packet complete */
-#define UDCCS_II_FTF (1 << 2) /* Flush Tx FIFO */
-#define UDCCS_II_TUR (1 << 3) /* Transmit FIFO underrun */
-#define UDCCS_II_TSP (1 << 7) /* Transmit short packet */
-
-/* Isochronous OUT - Endpoint 4,9,14 */
-#define UDCCS4 __REG(0x40600020) /* UDC Endpoint 4 (OUT) Control/Status Register */
-#define UDCCS9 __REG(0x40600034) /* UDC Endpoint 9 (OUT) Control/Status Register */
-#define UDCCS14 __REG(0x40600048) /* UDC Endpoint 14 (OUT) Control/Status Register */
-
-#define UDCCS_IO_RFS (1 << 0) /* Receive FIFO service */
-#define UDCCS_IO_RPC (1 << 1) /* Receive packet complete */
-#define UDCCS_IO_ROF (1 << 2) /* Receive overflow */
-#define UDCCS_IO_DME (1 << 3) /* DMA enable */
-#define UDCCS_IO_RNE (1 << 6) /* Receive FIFO not empty */
-#define UDCCS_IO_RSP (1 << 7) /* Receive short packet */
-
-/* Interrupt IN - Endpoint 5,10,15 */
-#define UDCCS5 __REG(0x40600024) /* UDC Endpoint 5 (Interrupt) Control/Status Register */
-#define UDCCS10 __REG(0x40600038) /* UDC Endpoint 10 (Interrupt) Control/Status Register */
-#define UDCCS15 __REG(0x4060004C) /* UDC Endpoint 15 (Interrupt) Control/Status Register */
-
-#define UDCCS_INT_TFS (1 << 0) /* Transmit FIFO service */
-#define UDCCS_INT_TPC (1 << 1) /* Transmit packet complete */
-#define UDCCS_INT_FTF (1 << 2) /* Flush Tx FIFO */
-#define UDCCS_INT_TUR (1 << 3) /* Transmit FIFO underrun */
-#define UDCCS_INT_SST (1 << 4) /* Sent stall */
-#define UDCCS_INT_FST (1 << 5) /* Force stall */
-#define UDCCS_INT_TSP (1 << 7) /* Transmit short packet */
-
-#define UFNRH __REG(0x40600060) /* UDC Frame Number Register High */
-#define UFNRL __REG(0x40600064) /* UDC Frame Number Register Low */
-#define UBCR2 __REG(0x40600068) /* UDC Byte Count Reg 2 */
-#define UBCR4 __REG(0x4060006c) /* UDC Byte Count Reg 4 */
-#define UBCR7 __REG(0x40600070) /* UDC Byte Count Reg 7 */
-#define UBCR9 __REG(0x40600074) /* UDC Byte Count Reg 9 */
-#define UBCR12 __REG(0x40600078) /* UDC Byte Count Reg 12 */
-#define UBCR14 __REG(0x4060007c) /* UDC Byte Count Reg 14 */
-#define UDDR0 __REG(0x40600080) /* UDC Endpoint 0 Data Register */
-#define UDDR1 __REG(0x40600100) /* UDC Endpoint 1 Data Register */
-#define UDDR2 __REG(0x40600180) /* UDC Endpoint 2 Data Register */
-#define UDDR3 __REG(0x40600200) /* UDC Endpoint 3 Data Register */
-#define UDDR4 __REG(0x40600400) /* UDC Endpoint 4 Data Register */
-#define UDDR5 __REG(0x406000A0) /* UDC Endpoint 5 Data Register */
-#define UDDR6 __REG(0x40600600) /* UDC Endpoint 6 Data Register */
-#define UDDR7 __REG(0x40600680) /* UDC Endpoint 7 Data Register */
-#define UDDR8 __REG(0x40600700) /* UDC Endpoint 8 Data Register */
-#define UDDR9 __REG(0x40600900) /* UDC Endpoint 9 Data Register */
-#define UDDR10 __REG(0x406000C0) /* UDC Endpoint 10 Data Register */
-#define UDDR11 __REG(0x40600B00) /* UDC Endpoint 11 Data Register */
-#define UDDR12 __REG(0x40600B80) /* UDC Endpoint 12 Data Register */
-#define UDDR13 __REG(0x40600C00) /* UDC Endpoint 13 Data Register */
-#define UDDR14 __REG(0x40600E00) /* UDC Endpoint 14 Data Register */
-#define UDDR15 __REG(0x406000E0) /* UDC Endpoint 15 Data Register */
-
-#define UICR0 __REG(0x40600050) /* UDC Interrupt Control Register 0 */
-
-#define UICR0_IM0 (1 << 0) /* Interrupt mask ep 0 */
-#define UICR0_IM1 (1 << 1) /* Interrupt mask ep 1 */
-#define UICR0_IM2 (1 << 2) /* Interrupt mask ep 2 */
-#define UICR0_IM3 (1 << 3) /* Interrupt mask ep 3 */
-#define UICR0_IM4 (1 << 4) /* Interrupt mask ep 4 */
-#define UICR0_IM5 (1 << 5) /* Interrupt mask ep 5 */
-#define UICR0_IM6 (1 << 6) /* Interrupt mask ep 6 */
-#define UICR0_IM7 (1 << 7) /* Interrupt mask ep 7 */
-
-#define UICR1 __REG(0x40600054) /* UDC Interrupt Control Register 1 */
-
-#define UICR1_IM8 (1 << 0) /* Interrupt mask ep 8 */
-#define UICR1_IM9 (1 << 1) /* Interrupt mask ep 9 */
-#define UICR1_IM10 (1 << 2) /* Interrupt mask ep 10 */
-#define UICR1_IM11 (1 << 3) /* Interrupt mask ep 11 */
-#define UICR1_IM12 (1 << 4) /* Interrupt mask ep 12 */
-#define UICR1_IM13 (1 << 5) /* Interrupt mask ep 13 */
-#define UICR1_IM14 (1 << 6) /* Interrupt mask ep 14 */
-#define UICR1_IM15 (1 << 7) /* Interrupt mask ep 15 */
-
-#define USIR0 __REG(0x40600058) /* UDC Status Interrupt Register 0 */
-
-#define USIR0_IR0 (1 << 0) /* Interrupt request ep 0 */
-#define USIR0_IR1 (1 << 1) /* Interrupt request ep 1 */
-#define USIR0_IR2 (1 << 2) /* Interrupt request ep 2 */
-#define USIR0_IR3 (1 << 3) /* Interrupt request ep 3 */
-#define USIR0_IR4 (1 << 4) /* Interrupt request ep 4 */
-#define USIR0_IR5 (1 << 5) /* Interrupt request ep 5 */
-#define USIR0_IR6 (1 << 6) /* Interrupt request ep 6 */
-#define USIR0_IR7 (1 << 7) /* Interrupt request ep 7 */
-
-#define USIR1 __REG(0x4060005C) /* UDC Status Interrupt Register 1 */
-
-#define USIR1_IR8 (1 << 0) /* Interrupt request ep 8 */
-#define USIR1_IR9 (1 << 1) /* Interrupt request ep 9 */
-#define USIR1_IR10 (1 << 2) /* Interrupt request ep 10 */
-#define USIR1_IR11 (1 << 3) /* Interrupt request ep 11 */
-#define USIR1_IR12 (1 << 4) /* Interrupt request ep 12 */
-#define USIR1_IR13 (1 << 5) /* Interrupt request ep 13 */
-#define USIR1_IR14 (1 << 6) /* Interrupt request ep 14 */
-#define USIR1_IR15 (1 << 7) /* Interrupt request ep 15 */
-
-#elif defined(CONFIG_PXA27x)
-
-#define UDCCR __REG(0x40600000) /* UDC Control Register */
-#define UDCCR_OEN (1 << 31) /* On-the-Go Enable */
-#define UDCCR_AALTHNP (1 << 30) /* A-device Alternate Host Negotiation
- Protocol Port Support */
-#define UDCCR_AHNP (1 << 29) /* A-device Host Negotiation Protocol
- Support */
-#define UDCCR_BHNP (1 << 28) /* B-device Host Negotiation Protocol
- Enable */
-#define UDCCR_DWRE (1 << 16) /* Device Remote Wake-up Enable */
-#define UDCCR_ACN (0x03 << 11) /* Active UDC configuration Number */
-#define UDCCR_ACN_S 11
-#define UDCCR_AIN (0x07 << 8) /* Active UDC interface Number */
-#define UDCCR_AIN_S 8
-#define UDCCR_AAISN (0x07 << 5) /* Active UDC Alternate Interface
- Setting Number */
-#define UDCCR_AAISN_S 5
-#define UDCCR_SMAC (1 << 4) /* Switch Endpoint Memory to Active
- Configuration */
-#define UDCCR_EMCE (1 << 3) /* Endpoint Memory Configuration
- Error */
-#define UDCCR_UDR (1 << 2) /* UDC Resume */
-#define UDCCR_UDA (1 << 1) /* UDC Active */
-#define UDCCR_UDE (1 << 0) /* UDC Enable */
-
-#define UDCICR0 __REG(0x40600004) /* UDC Interrupt Control Register0 */
-#define UDCICR1 __REG(0x40600008) /* UDC Interrupt Control Register1 */
-#define UDCICR_FIFOERR (1 << 1) /* FIFO Error interrupt for EP */
-#define UDCICR_PKTCOMPL (1 << 0) /* Packet Complete interrupt for EP */
-
-#define UDC_INT_FIFOERROR (0x2)
-#define UDC_INT_PACKETCMP (0x1)
-
-#define UDCICR_INT(n,intr) (((intr) & 0x03) << (((n) & 0x0F) * 2))
-#define UDCICR1_IECC (1 << 31) /* IntEn - Configuration Change */
-#define UDCICR1_IESOF (1 << 30) /* IntEn - Start of Frame */
-#define UDCICR1_IERU (1 << 29) /* IntEn - Resume */
-#define UDCICR1_IESU (1 << 28) /* IntEn - Suspend */
-#define UDCICR1_IERS (1 << 27) /* IntEn - Reset */
-
-#define UDCISR0 __REG(0x4060000C) /* UDC Interrupt Status Register 0 */
-#define UDCISR1 __REG(0x40600010) /* UDC Interrupt Status Register 1 */
-#define UDCISR_INT(n,intr) (((intr) & 0x03) << (((n) & 0x0F) * 2))
-#define UDCISR1_IRCC (1 << 31) /* IntReq - Configuration Change */
-#define UDCISR1_IRSOF (1 << 30) /* IntReq - Start of Frame */
-#define UDCISR1_IRRU (1 << 29) /* IntReq - Resume */
-#define UDCISR1_IRSU (1 << 28) /* IntReq - Suspend */
-#define UDCISR1_IRRS (1 << 27) /* IntReq - Reset */
-
-#define UDCFNR __REG(0x40600014) /* UDC Frame Number Register */
-#define UDCOTGICR __REG(0x40600018) /* UDC On-The-Go interrupt control */
-#define UDCOTGICR_IESF (1 << 24) /* OTG SET_FEATURE command recvd */
-#define UDCOTGICR_IEXR (1 << 17) /* Extra Transciever Interrupt
- Rising Edge Interrupt Enable */
-#define UDCOTGICR_IEXF (1 << 16) /* Extra Transciever Interrupt
- Falling Edge Interrupt Enable */
-#define UDCOTGICR_IEVV40R (1 << 9) /* OTG Vbus Valid 4.0V Rising Edge
- Interrupt Enable */
-#define UDCOTGICR_IEVV40F (1 << 8) /* OTG Vbus Valid 4.0V Falling Edge
- Interrupt Enable */
-#define UDCOTGICR_IEVV44R (1 << 7) /* OTG Vbus Valid 4.4V Rising Edge
- Interrupt Enable */
-#define UDCOTGICR_IEVV44F (1 << 6) /* OTG Vbus Valid 4.4V Falling Edge
- Interrupt Enable */
-#define UDCOTGICR_IESVR (1 << 5) /* OTG Session Valid Rising Edge
- Interrupt Enable */
-#define UDCOTGICR_IESVF (1 << 4) /* OTG Session Valid Falling Edge
- Interrupt Enable */
-#define UDCOTGICR_IESDR (1 << 3) /* OTG A-Device SRP Detect Rising
- Edge Interrupt Enable */
-#define UDCOTGICR_IESDF (1 << 2) /* OTG A-Device SRP Detect Falling
- Edge Interrupt Enable */
-#define UDCOTGICR_IEIDR (1 << 1) /* OTG ID Change Rising Edge
- Interrupt Enable */
-#define UDCOTGICR_IEIDF (1 << 0) /* OTG ID Change Falling Edge
- Interrupt Enable */
-
-#define UP2OCR __REG(0x40600020) /* USB Port 2 Output Control register */
-
-#define UP2OCR_CPVEN (1 << 0) /* Charge Pump Vbus Enable */
-#define UP2OCR_CPVPE (1 << 1) /* Charge Pump Vbus Pulse Enable */
-#define UP2OCR_DPPDE (1 << 2) /* Host Port 2 Transceiver D+ Pull Down Enable */
-#define UP2OCR_DMPDE (1 << 3) /* Host Port 2 Transceiver D- Pull Down Enable */
-#define UP2OCR_DPPUE (1 << 4) /* Host Port 2 Transceiver D+ Pull Up Enable */
-#define UP2OCR_DMPUE (1 << 5) /* Host Port 2 Transceiver D- Pull Up Enable */
-#define UP2OCR_DPPUBE (1 << 6) /* Host Port 2 Transceiver D+ Pull Up Bypass Enable */
-#define UP2OCR_DMPUBE (1 << 7) /* Host Port 2 Transceiver D- Pull Up Bypass Enable */
-#define UP2OCR_EXSP (1 << 8) /* External Transceiver Speed Control */
-#define UP2OCR_EXSUS (1 << 9) /* External Transceiver Speed Enable */
-#define UP2OCR_IDON (1 << 10) /* OTG ID Read Enable */
-#define UP2OCR_HXS (1 << 16) /* Host Port 2 Transceiver Output Select */
-#define UP2OCR_HXOE (1 << 17) /* Host Port 2 Transceiver Output Enable */
-#define UP2OCR_SEOS (1 << 24) /* Single-Ended Output Select */
-
-#define UDCCSN(x) __REG2(0x40600100, (x) << 2)
-#define UDCCSR0 __REG(0x40600100) /* UDC Control/Status register - Endpoint 0 */
-#define UDCCSR0_SA (1 << 7) /* Setup Active */
-#define UDCCSR0_RNE (1 << 6) /* Receive FIFO Not Empty */
-#define UDCCSR0_FST (1 << 5) /* Force Stall */
-#define UDCCSR0_SST (1 << 4) /* Sent Stall */
-#define UDCCSR0_DME (1 << 3) /* DMA Enable */
-#define UDCCSR0_FTF (1 << 2) /* Flush Transmit FIFO */
-#define UDCCSR0_IPR (1 << 1) /* IN Packet Ready */
-#define UDCCSR0_OPC (1 << 0) /* OUT Packet Complete */
-
-#define UDCCSRA __REG(0x40600104) /* UDC Control/Status register - Endpoint A */
-#define UDCCSRB __REG(0x40600108) /* UDC Control/Status register - Endpoint B */
-#define UDCCSRC __REG(0x4060010C) /* UDC Control/Status register - Endpoint C */
-#define UDCCSRD __REG(0x40600110) /* UDC Control/Status register - Endpoint D */
-#define UDCCSRE __REG(0x40600114) /* UDC Control/Status register - Endpoint E */
-#define UDCCSRF __REG(0x40600118) /* UDC Control/Status register - Endpoint F */
-#define UDCCSRG __REG(0x4060011C) /* UDC Control/Status register - Endpoint G */
-#define UDCCSRH __REG(0x40600120) /* UDC Control/Status register - Endpoint H */
-#define UDCCSRI __REG(0x40600124) /* UDC Control/Status register - Endpoint I */
-#define UDCCSRJ __REG(0x40600128) /* UDC Control/Status register - Endpoint J */
-#define UDCCSRK __REG(0x4060012C) /* UDC Control/Status register - Endpoint K */
-#define UDCCSRL __REG(0x40600130) /* UDC Control/Status register - Endpoint L */
-#define UDCCSRM __REG(0x40600134) /* UDC Control/Status register - Endpoint M */
-#define UDCCSRN __REG(0x40600138) /* UDC Control/Status register - Endpoint N */
-#define UDCCSRP __REG(0x4060013C) /* UDC Control/Status register - Endpoint P */
-#define UDCCSRQ __REG(0x40600140) /* UDC Control/Status register - Endpoint Q */
-#define UDCCSRR __REG(0x40600144) /* UDC Control/Status register - Endpoint R */
-#define UDCCSRS __REG(0x40600148) /* UDC Control/Status register - Endpoint S */
-#define UDCCSRT __REG(0x4060014C) /* UDC Control/Status register - Endpoint T */
-#define UDCCSRU __REG(0x40600150) /* UDC Control/Status register - Endpoint U */
-#define UDCCSRV __REG(0x40600154) /* UDC Control/Status register - Endpoint V */
-#define UDCCSRW __REG(0x40600158) /* UDC Control/Status register - Endpoint W */
-#define UDCCSRX __REG(0x4060015C) /* UDC Control/Status register - Endpoint X */
-
-#define UDCCSR_DPE (1 << 9) /* Data Packet Error */
-#define UDCCSR_FEF (1 << 8) /* Flush Endpoint FIFO */
-#define UDCCSR_SP (1 << 7) /* Short Packet Control/Status */
-#define UDCCSR_BNE (1 << 6) /* Buffer Not Empty (IN endpoints) */
-#define UDCCSR_BNF (1 << 6) /* Buffer Not Full (OUT endpoints) */
-#define UDCCSR_FST (1 << 5) /* Force STALL */
-#define UDCCSR_SST (1 << 4) /* Sent STALL */
-#define UDCCSR_DME (1 << 3) /* DMA Enable */
-#define UDCCSR_TRN (1 << 2) /* Tx/Rx NAK */
-#define UDCCSR_PC (1 << 1) /* Packet Complete */
-#define UDCCSR_FS (1 << 0) /* FIFO needs service */
-
-#define UDCBCN(x) __REG2(0x40600200, (x)<<2)
-#define UDCBCR0 __REG(0x40600200) /* Byte Count Register - EP0 */
-#define UDCBCRA __REG(0x40600204) /* Byte Count Register - EPA */
-#define UDCBCRB __REG(0x40600208) /* Byte Count Register - EPB */
-#define UDCBCRC __REG(0x4060020C) /* Byte Count Register - EPC */
-#define UDCBCRD __REG(0x40600210) /* Byte Count Register - EPD */
-#define UDCBCRE __REG(0x40600214) /* Byte Count Register - EPE */
-#define UDCBCRF __REG(0x40600218) /* Byte Count Register - EPF */
-#define UDCBCRG __REG(0x4060021C) /* Byte Count Register - EPG */
-#define UDCBCRH __REG(0x40600220) /* Byte Count Register - EPH */
-#define UDCBCRI __REG(0x40600224) /* Byte Count Register - EPI */
-#define UDCBCRJ __REG(0x40600228) /* Byte Count Register - EPJ */
-#define UDCBCRK __REG(0x4060022C) /* Byte Count Register - EPK */
-#define UDCBCRL __REG(0x40600230) /* Byte Count Register - EPL */
-#define UDCBCRM __REG(0x40600234) /* Byte Count Register - EPM */
-#define UDCBCRN __REG(0x40600238) /* Byte Count Register - EPN */
-#define UDCBCRP __REG(0x4060023C) /* Byte Count Register - EPP */
-#define UDCBCRQ __REG(0x40600240) /* Byte Count Register - EPQ */
-#define UDCBCRR __REG(0x40600244) /* Byte Count Register - EPR */
-#define UDCBCRS __REG(0x40600248) /* Byte Count Register - EPS */
-#define UDCBCRT __REG(0x4060024C) /* Byte Count Register - EPT */
-#define UDCBCRU __REG(0x40600250) /* Byte Count Register - EPU */
-#define UDCBCRV __REG(0x40600254) /* Byte Count Register - EPV */
-#define UDCBCRW __REG(0x40600258) /* Byte Count Register - EPW */
-#define UDCBCRX __REG(0x4060025C) /* Byte Count Register - EPX */
-
-#define UDCDN(x) __REG2(0x40600300, (x)<<2)
-#define PHYS_UDCDN(x) (0x40600300 + ((x)<<2))
-#define PUDCDN(x) (volatile u32 *)(io_p2v(PHYS_UDCDN((x))))
-#define UDCDR0 __REG(0x40600300) /* Data Register - EP0 */
-#define UDCDRA __REG(0x40600304) /* Data Register - EPA */
-#define UDCDRB __REG(0x40600308) /* Data Register - EPB */
-#define UDCDRC __REG(0x4060030C) /* Data Register - EPC */
-#define UDCDRD __REG(0x40600310) /* Data Register - EPD */
-#define UDCDRE __REG(0x40600314) /* Data Register - EPE */
-#define UDCDRF __REG(0x40600318) /* Data Register - EPF */
-#define UDCDRG __REG(0x4060031C) /* Data Register - EPG */
-#define UDCDRH __REG(0x40600320) /* Data Register - EPH */
-#define UDCDRI __REG(0x40600324) /* Data Register - EPI */
-#define UDCDRJ __REG(0x40600328) /* Data Register - EPJ */
-#define UDCDRK __REG(0x4060032C) /* Data Register - EPK */
-#define UDCDRL __REG(0x40600330) /* Data Register - EPL */
-#define UDCDRM __REG(0x40600334) /* Data Register - EPM */
-#define UDCDRN __REG(0x40600338) /* Data Register - EPN */
-#define UDCDRP __REG(0x4060033C) /* Data Register - EPP */
-#define UDCDRQ __REG(0x40600340) /* Data Register - EPQ */
-#define UDCDRR __REG(0x40600344) /* Data Register - EPR */
-#define UDCDRS __REG(0x40600348) /* Data Register - EPS */
-#define UDCDRT __REG(0x4060034C) /* Data Register - EPT */
-#define UDCDRU __REG(0x40600350) /* Data Register - EPU */
-#define UDCDRV __REG(0x40600354) /* Data Register - EPV */
-#define UDCDRW __REG(0x40600358) /* Data Register - EPW */
-#define UDCDRX __REG(0x4060035C) /* Data Register - EPX */
-
-#define UDCCN(x) __REG2(0x40600400, (x)<<2)
-#define UDCCRA __REG(0x40600404) /* Configuration register EPA */
-#define UDCCRB __REG(0x40600408) /* Configuration register EPB */
-#define UDCCRC __REG(0x4060040C) /* Configuration register EPC */
-#define UDCCRD __REG(0x40600410) /* Configuration register EPD */
-#define UDCCRE __REG(0x40600414) /* Configuration register EPE */
-#define UDCCRF __REG(0x40600418) /* Configuration register EPF */
-#define UDCCRG __REG(0x4060041C) /* Configuration register EPG */
-#define UDCCRH __REG(0x40600420) /* Configuration register EPH */
-#define UDCCRI __REG(0x40600424) /* Configuration register EPI */
-#define UDCCRJ __REG(0x40600428) /* Configuration register EPJ */
-#define UDCCRK __REG(0x4060042C) /* Configuration register EPK */
-#define UDCCRL __REG(0x40600430) /* Configuration register EPL */
-#define UDCCRM __REG(0x40600434) /* Configuration register EPM */
-#define UDCCRN __REG(0x40600438) /* Configuration register EPN */
-#define UDCCRP __REG(0x4060043C) /* Configuration register EPP */
-#define UDCCRQ __REG(0x40600440) /* Configuration register EPQ */
-#define UDCCRR __REG(0x40600444) /* Configuration register EPR */
-#define UDCCRS __REG(0x40600448) /* Configuration register EPS */
-#define UDCCRT __REG(0x4060044C) /* Configuration register EPT */
-#define UDCCRU __REG(0x40600450) /* Configuration register EPU */
-#define UDCCRV __REG(0x40600454) /* Configuration register EPV */
-#define UDCCRW __REG(0x40600458) /* Configuration register EPW */
-#define UDCCRX __REG(0x4060045C) /* Configuration register EPX */
-
-#define UDCCONR_CN (0x03 << 25) /* Configuration Number */
-#define UDCCONR_CN_S (25)
-#define UDCCONR_IN (0x07 << 22) /* Interface Number */
-#define UDCCONR_IN_S (22)
-#define UDCCONR_AISN (0x07 << 19) /* Alternate Interface Number */
-#define UDCCONR_AISN_S (19)
-#define UDCCONR_EN (0x0f << 15) /* Endpoint Number */
-#define UDCCONR_EN_S (15)
-#define UDCCONR_ET (0x03 << 13) /* Endpoint Type: */
-#define UDCCONR_ET_S (13)
-#define UDCCONR_ET_INT (0x03 << 13) /* Interrupt */
-#define UDCCONR_ET_BULK (0x02 << 13) /* Bulk */
-#define UDCCONR_ET_ISO (0x01 << 13) /* Isochronous */
-#define UDCCONR_ET_NU (0x00 << 13) /* Not used */
-#define UDCCONR_ED (1 << 12) /* Endpoint Direction */
-#define UDCCONR_MPS (0x3ff << 2) /* Maximum Packet Size */
-#define UDCCONR_MPS_S (2)
-#define UDCCONR_DE (1 << 1) /* Double Buffering Enable */
-#define UDCCONR_EE (1 << 0) /* Endpoint Enable */
-
-
-#define UDC_INT_FIFOERROR (0x2)
-#define UDC_INT_PACKETCMP (0x1)
-
-#define UDC_FNR_MASK (0x7ff)
-
-#define UDCCSR_WR_MASK (UDCCSR_DME|UDCCSR_FST)
-#define UDC_BCR_MASK (0x3ff)
-#endif
-
-/*
* Fast Infrared Communication Port
*/
@@ -1237,120 +825,9 @@
#endif
/*
- * Power Manager
+ * Power Manager - see pxa2xx-regs.h
*/
-#define PMCR __REG(0x40F00000) /* Power Manager Control Register */
-#define PSSR __REG(0x40F00004) /* Power Manager Sleep Status Register */
-#define PSPR __REG(0x40F00008) /* Power Manager Scratch Pad Register */
-#define PWER __REG(0x40F0000C) /* Power Manager Wake-up Enable Register */
-#define PRER __REG(0x40F00010) /* Power Manager GPIO Rising-Edge Detect Enable Register */
-#define PFER __REG(0x40F00014) /* Power Manager GPIO Falling-Edge Detect Enable Register */
-#define PEDR __REG(0x40F00018) /* Power Manager GPIO Edge Detect Status Register */
-#define PCFR __REG(0x40F0001C) /* Power Manager General Configuration Register */
-#define PGSR0 __REG(0x40F00020) /* Power Manager GPIO Sleep State Register for GP[31-0] */
-#define PGSR1 __REG(0x40F00024) /* Power Manager GPIO Sleep State Register for GP[63-32] */
-#define PGSR2 __REG(0x40F00028) /* Power Manager GPIO Sleep State Register for GP[84-64] */
-#define PGSR3 __REG(0x40F0002C) /* Power Manager GPIO Sleep State Register for GP[118-96] */
-#define RCSR __REG(0x40F00030) /* Reset Controller Status Register */
-
-#define PSLR __REG(0x40F00034) /* Power Manager Sleep Config Register */
-#define PSTR __REG(0x40F00038) /*Power Manager Standby Config Register */
-#define PSNR __REG(0x40F0003C) /*Power Manager Sense Config Register */
-#define PVCR __REG(0x40F00040) /*Power Manager VoltageControl Register */
-#define PKWR __REG(0x40F00050) /* Power Manager KB Wake-up Enable Reg */
-#define PKSR __REG(0x40F00054) /* Power Manager KB Level-Detect Register */
-#define PCMD(x) __REG2(0x40F00080, (x)<<2)
-#define PCMD0 __REG(0x40F00080 + 0 * 4)
-#define PCMD1 __REG(0x40F00080 + 1 * 4)
-#define PCMD2 __REG(0x40F00080 + 2 * 4)
-#define PCMD3 __REG(0x40F00080 + 3 * 4)
-#define PCMD4 __REG(0x40F00080 + 4 * 4)
-#define PCMD5 __REG(0x40F00080 + 5 * 4)
-#define PCMD6 __REG(0x40F00080 + 6 * 4)
-#define PCMD7 __REG(0x40F00080 + 7 * 4)
-#define PCMD8 __REG(0x40F00080 + 8 * 4)
-#define PCMD9 __REG(0x40F00080 + 9 * 4)
-#define PCMD10 __REG(0x40F00080 + 10 * 4)
-#define PCMD11 __REG(0x40F00080 + 11 * 4)
-#define PCMD12 __REG(0x40F00080 + 12 * 4)
-#define PCMD13 __REG(0x40F00080 + 13 * 4)
-#define PCMD14 __REG(0x40F00080 + 14 * 4)
-#define PCMD15 __REG(0x40F00080 + 15 * 4)
-#define PCMD16 __REG(0x40F00080 + 16 * 4)
-#define PCMD17 __REG(0x40F00080 + 17 * 4)
-#define PCMD18 __REG(0x40F00080 + 18 * 4)
-#define PCMD19 __REG(0x40F00080 + 19 * 4)
-#define PCMD20 __REG(0x40F00080 + 20 * 4)
-#define PCMD21 __REG(0x40F00080 + 21 * 4)
-#define PCMD22 __REG(0x40F00080 + 22 * 4)
-#define PCMD23 __REG(0x40F00080 + 23 * 4)
-#define PCMD24 __REG(0x40F00080 + 24 * 4)
-#define PCMD25 __REG(0x40F00080 + 25 * 4)
-#define PCMD26 __REG(0x40F00080 + 26 * 4)
-#define PCMD27 __REG(0x40F00080 + 27 * 4)
-#define PCMD28 __REG(0x40F00080 + 28 * 4)
-#define PCMD29 __REG(0x40F00080 + 29 * 4)
-#define PCMD30 __REG(0x40F00080 + 30 * 4)
-#define PCMD31 __REG(0x40F00080 + 31 * 4)
-
-#define PCMD_MBC (1<<12)
-#define PCMD_DCE (1<<11)
-#define PCMD_LC (1<<10)
-/* FIXME: PCMD_SQC need be checked. */
-#define PCMD_SQC (3<<8) /* currently only bit 8 is changeable,
- bit 9 should be 0 all day. */
-#define PVCR_VCSA (0x1<<14)
-#define PVCR_CommandDelay (0xf80)
-#define PCFR_PI2C_EN (0x1 << 6)
-
-#define PSSR_OTGPH (1 << 6) /* OTG Peripheral control Hold */
-#define PSSR_RDH (1 << 5) /* Read Disable Hold */
-#define PSSR_PH (1 << 4) /* Peripheral Control Hold */
-#define PSSR_STS (1 << 3) /* Standby Mode Status */
-#define PSSR_VFS (1 << 2) /* VDD Fault Status */
-#define PSSR_BFS (1 << 1) /* Battery Fault Status */
-#define PSSR_SSS (1 << 0) /* Software Sleep Status */
-
-#define PSLR_SL_ROD (1 << 20) /* Sleep-Mode/Depp-Sleep Mode nRESET_OUT Disable */
-
-#define PCFR_RO (1 << 15) /* RDH Override */
-#define PCFR_PO (1 << 14) /* PH Override */
-#define PCFR_GPROD (1 << 12) /* GPIO nRESET_OUT Disable */
-#define PCFR_L1_EN (1 << 11) /* Sleep Mode L1 converter Enable */
-#define PCFR_FVC (1 << 10) /* Frequency/Voltage Change */
-#define PCFR_DC_EN (1 << 7) /* Sleep/deep-sleep DC-DC Converter Enable */
-#define PCFR_PI2CEN (1 << 6) /* Enable PI2C controller */
-#define PCFR_GPR_EN (1 << 4) /* nRESET_GPIO Pin Enable */
-#define PCFR_DS (1 << 3) /* Deep Sleep Mode */
-#define PCFR_FS (1 << 2) /* Float Static Chip Selects */
-#define PCFR_FP (1 << 1) /* Float PCMCIA controls */
-#define PCFR_OPDE (1 << 0) /* 3.6864 MHz oscillator power-down enable */
-
-#define RCSR_GPR (1 << 3) /* GPIO Reset */
-#define RCSR_SMR (1 << 2) /* Sleep Mode */
-#define RCSR_WDR (1 << 1) /* Watchdog Reset */
-#define RCSR_HWR (1 << 0) /* Hardware Reset */
-
-#define PWER_GPIO(Nb) (1 << Nb) /* GPIO [0..15] wake-up enable */
-#define PWER_GPIO0 PWER_GPIO (0) /* GPIO [0] wake-up enable */
-#define PWER_GPIO1 PWER_GPIO (1) /* GPIO [1] wake-up enable */
-#define PWER_GPIO2 PWER_GPIO (2) /* GPIO [2] wake-up enable */
-#define PWER_GPIO3 PWER_GPIO (3) /* GPIO [3] wake-up enable */
-#define PWER_GPIO4 PWER_GPIO (4) /* GPIO [4] wake-up enable */
-#define PWER_GPIO5 PWER_GPIO (5) /* GPIO [5] wake-up enable */
-#define PWER_GPIO6 PWER_GPIO (6) /* GPIO [6] wake-up enable */
-#define PWER_GPIO7 PWER_GPIO (7) /* GPIO [7] wake-up enable */
-#define PWER_GPIO8 PWER_GPIO (8) /* GPIO [8] wake-up enable */
-#define PWER_GPIO9 PWER_GPIO (9) /* GPIO [9] wake-up enable */
-#define PWER_GPIO10 PWER_GPIO (10) /* GPIO [10] wake-up enable */
-#define PWER_GPIO11 PWER_GPIO (11) /* GPIO [11] wake-up enable */
-#define PWER_GPIO12 PWER_GPIO (12) /* GPIO [12] wake-up enable */
-#define PWER_GPIO13 PWER_GPIO (13) /* GPIO [13] wake-up enable */
-#define PWER_GPIO14 PWER_GPIO (14) /* GPIO [14] wake-up enable */
-#define PWER_GPIO15 PWER_GPIO (15) /* GPIO [15] wake-up enable */
-#define PWER_RTC 0x80000000 /* RTC alarm wake-up enable */
-
/*
* SSP Serial Port Registers - see include/asm-arm/arch-pxa/regs-ssp.h
*/
@@ -1360,52 +837,9 @@
*/
/*
- * Core Clock
+ * Core Clock - see include/asm-arm/arch-pxa/pxa2xx-regs.h
*/
-#define CCCR __REG(0x41300000) /* Core Clock Configuration Register */
-#define CKEN __REG(0x41300004) /* Clock Enable Register */
-#define OSCC __REG(0x41300008) /* Oscillator Configuration Register */
-#define CCSR __REG(0x4130000C) /* Core Clock Status Register */
-
-#define CCCR_N_MASK 0x0380 /* Run Mode Frequency to Turbo Mode Frequency Multiplier */
-#define CCCR_M_MASK 0x0060 /* Memory Frequency to Run Mode Frequency Multiplier */
-#define CCCR_L_MASK 0x001f /* Crystal Frequency to Memory Frequency Multiplier */
-
-#define CKEN_AC97CONF (31) /* AC97 Controller Configuration */
-#define CKEN_CAMERA (24) /* Camera Interface Clock Enable */
-#define CKEN_SSP1 (23) /* SSP1 Unit Clock Enable */
-#define CKEN_MEMC (22) /* Memory Controller Clock Enable */
-#define CKEN_MEMSTK (21) /* Memory Stick Host Controller */
-#define CKEN_IM (20) /* Internal Memory Clock Enable */
-#define CKEN_KEYPAD (19) /* Keypad Interface Clock Enable */
-#define CKEN_USIM (18) /* USIM Unit Clock Enable */
-#define CKEN_MSL (17) /* MSL Unit Clock Enable */
-#define CKEN_LCD (16) /* LCD Unit Clock Enable */
-#define CKEN_PWRI2C (15) /* PWR I2C Unit Clock Enable */
-#define CKEN_I2C (14) /* I2C Unit Clock Enable */
-#define CKEN_FICP (13) /* FICP Unit Clock Enable */
-#define CKEN_MMC (12) /* MMC Unit Clock Enable */
-#define CKEN_USB (11) /* USB Unit Clock Enable */
-#define CKEN_ASSP (10) /* ASSP (SSP3) Clock Enable */
-#define CKEN_USBHOST (10) /* USB Host Unit Clock Enable */
-#define CKEN_OSTIMER (9) /* OS Timer Unit Clock Enable */
-#define CKEN_NSSP (9) /* NSSP (SSP2) Clock Enable */
-#define CKEN_I2S (8) /* I2S Unit Clock Enable */
-#define CKEN_BTUART (7) /* BTUART Unit Clock Enable */
-#define CKEN_FFUART (6) /* FFUART Unit Clock Enable */
-#define CKEN_STUART (5) /* STUART Unit Clock Enable */
-#define CKEN_HWUART (4) /* HWUART Unit Clock Enable */
-#define CKEN_SSP3 (4) /* SSP3 Unit Clock Enable */
-#define CKEN_SSP (3) /* SSP Unit Clock Enable */
-#define CKEN_SSP2 (3) /* SSP2 Unit Clock Enable */
-#define CKEN_AC97 (2) /* AC97 Unit Clock Enable */
-#define CKEN_PWM1 (1) /* PWM1 Clock Enable */
-#define CKEN_PWM0 (0) /* PWM0 Clock Enable */
-
-#define OSCC_OON (1 << 1) /* 32.768kHz OON (write-once only bit) */
-#define OSCC_OOK (1 << 0) /* 32.768kHz OOK (read-only bit) */
-
#ifdef CONFIG_PXA27x
/* Camera Interface */