diff options
Diffstat (limited to 'include/asm-arm/arch-s3c2410/debug-macro.S')
| -rw-r--r-- | include/asm-arm/arch-s3c2410/debug-macro.S | 84 |
1 files changed, 43 insertions, 41 deletions
diff --git a/include/asm-arm/arch-s3c2410/debug-macro.S b/include/asm-arm/arch-s3c2410/debug-macro.S index 93064860e0e..9c8cd9abb82 100644 --- a/include/asm-arm/arch-s3c2410/debug-macro.S +++ b/include/asm-arm/arch-s3c2410/debug-macro.S @@ -13,32 +13,23 @@ */ #include <asm/arch/map.h> -#include <asm/arch/regs-serial.h> #include <asm/arch/regs-gpio.h> +#include <asm/plat-s3c/regs-serial.h> #define S3C2410_UART1_OFF (0x4000) #define SHIFT_2440TXF (14-9) - .macro addruart, rx + .macro addruart, rx mrc p15, 0, \rx, c1, c0 tst \rx, #1 ldreq \rx, = S3C24XX_PA_UART ldrne \rx, = S3C24XX_VA_UART -#if CONFIG_DEBUG_S3C2410_UART != 0 - add \rx, \rx, #(S3C2410_UART1_OFF * CONFIG_DEBUG_S3C2410_UART) +#if CONFIG_DEBUG_S3C_UART != 0 + add \rx, \rx, #(S3C2410_UART1_OFF * CONFIG_DEBUG_S3C_UART) #endif - .endm + .endm - .macro senduart,rd,rx - strb \rd, [\rx, # S3C2410_UTXH ] - .endm - - .macro busyuart, rd, rx - ldr \rd, [ \rx, # S3C2410_UFCON ] - tst \rd, #S3C2410_UFCON_FIFOMODE @ fifo enabled? - beq 1001f @ - @ FIFO enabled... -1003: + .macro fifo_full_s3c24xx rd, rx @ check for arm920 vs arm926. currently assume all arm926 @ devices have an 64 byte FIFO identical to the s3c2440 mrc p15, 0, \rd, c0, c0 @@ -57,25 +48,22 @@ ldr \rd, [ \rx, # S3C2410_UFSTAT ] moveq \rd, \rd, lsr #SHIFT_2440TXF tst \rd, #S3C2410_UFSTAT_TXFULL - bne 1003b - b 1002f - -1001: - @ busy waiting for non fifo - ldr \rd, [ \rx, # S3C2410_UTRSTAT ] - tst \rd, #S3C2410_UTRSTAT_TXFE - beq 1001b + .endm -1002: @ exit busyuart - .endm + .macro fifo_full_s3c2410 rd, rx + ldr \rd, [ \rx, # S3C2410_UFSTAT ] + tst \rd, #S3C2410_UFSTAT_TXFULL + .endm - .macro waituart,rd,rx +/* fifo level reading */ - ldr \rd, [ \rx, # S3C2410_UFCON ] - tst \rd, #S3C2410_UFCON_FIFOMODE @ fifo enabled? - beq 1001f @ - @ FIFO enabled... -1003: + .macro fifo_level_s3c24xx rd, rx + @ check for arm920 vs arm926. currently assume all arm926 + @ devices have an 64 byte FIFO identical to the s3c2440 + mrc p15, 0, \rd, c0, c0 + and \rd, \rd, #0xff0 + teq \rd, #0x260 + beq 10000f mrc p15, 0, \rd, c1, c0 tst \rd, #1 addeq \rd, \rx, #(S3C24XX_PA_GPIO - S3C24XX_PA_UART) @@ -85,18 +73,32 @@ and \rd, \rd, #0x00ff0000 teq \rd, #0x00440000 @ is it 2440? +10000: ldr \rd, [ \rx, # S3C2410_UFSTAT ] andne \rd, \rd, #S3C2410_UFSTAT_TXMASK andeq \rd, \rd, #S3C2440_UFSTAT_TXMASK - teq \rd, #0 - bne 1003b - b 1002f + .endm + + .macro fifo_level_s3c2410 rd, rx + ldr \rd, [ \rx, # S3C2410_UFSTAT ] + and \rd, \rd, #S3C2410_UFSTAT_TXMASK + .endm + +/* Select the correct implementation depending on the configuration. The + * S3C2440 will get selected by default, as these are the most widely + * used variants of these +*/ + +#if defined(CONFIG_CPU_LLSERIAL_S3C2410_ONLY) +#define fifo_full fifo_full_s3c2410 +#define fifo_level fifo_level_s3c2410 +#warning 2410only +#elif !defined(CONFIG_CPU_LLSERIAL_S3C2440_ONLY) +#define fifo_full fifo_full_s3c24xx +#define fifo_level fifo_level_s3c24xx +#warning generic +#endif -1001: - @ idle waiting for non fifo - ldr \rd, [ \rx, # S3C2410_UTRSTAT ] - tst \rd, #S3C2410_UTRSTAT_TXFE - beq 1001b +/* include the reset of the code which will do the work */ -1002: @ exit busyuart - .endm +#include <asm/plat-s3c/debug-macro.S> |