diff options
Diffstat (limited to 'include/asm-arm/arch-s3c2410')
-rw-r--r-- | include/asm-arm/arch-s3c2410/debug-macro.S | 10 | ||||
-rw-r--r-- | include/asm-arm/arch-s3c2410/dma.h | 1 | ||||
-rw-r--r-- | include/asm-arm/arch-s3c2410/entry-macro.S | 30 | ||||
-rw-r--r-- | include/asm-arm/arch-s3c2410/map.h | 27 | ||||
-rw-r--r-- | include/asm-arm/arch-s3c2410/regs-clock.h | 71 | ||||
-rw-r--r-- | include/asm-arm/arch-s3c2410/regs-dsc.h | 15 | ||||
-rw-r--r-- | include/asm-arm/arch-s3c2410/regs-gpio.h | 68 | ||||
-rw-r--r-- | include/asm-arm/arch-s3c2410/regs-gpioj.h | 5 | ||||
-rw-r--r-- | include/asm-arm/arch-s3c2410/regs-irq.h | 6 | ||||
-rw-r--r-- | include/asm-arm/arch-s3c2410/regs-nand.h | 48 | ||||
-rw-r--r-- | include/asm-arm/arch-s3c2410/regs-serial.h | 15 | ||||
-rw-r--r-- | include/asm-arm/arch-s3c2410/uncompress.h | 6 |
12 files changed, 257 insertions, 45 deletions
diff --git a/include/asm-arm/arch-s3c2410/debug-macro.S b/include/asm-arm/arch-s3c2410/debug-macro.S index 5f8223e700d..b7d15d12545 100644 --- a/include/asm-arm/arch-s3c2410/debug-macro.S +++ b/include/asm-arm/arch-s3c2410/debug-macro.S @@ -33,7 +33,7 @@ .endm .macro senduart,rd,rx - str \rd, [\rx, # S3C2410_UTXH ] + strb \rd, [\rx, # S3C2410_UTXH ] .endm .macro busyuart, rd, rx @@ -42,6 +42,12 @@ beq 1001f @ @ FIFO enabled... 1003: + @ check for arm920 vs arm926. currently assume all arm926 + @ devices have an 64 byte FIFO identical to the s3c2440 + mrc p15, 0, \rd, c0, c0 + and \rd, \rd, #0xff0 + teq \rd, #0x260 + beq 1004f mrc p15, 0, \rd, c1, c0 tst \rd, #1 addeq \rd, \rx, #(S3C24XX_PA_GPIO - S3C24XX_PA_UART) @@ -50,7 +56,7 @@ ldr \rd, [ \rd, # S3C2410_GSTATUS1 - S3C2410_GPIOREG(0) ] and \rd, \rd, #0x00ff0000 teq \rd, #0x00440000 @ is it 2440? - +1004: ldr \rd, [ \rx, # S3C2410_UFSTAT ] moveq \rd, \rd, lsr #SHIFT_2440TXF tst \rd, #S3C2410_UFSTAT_TXFULL diff --git a/include/asm-arm/arch-s3c2410/dma.h b/include/asm-arm/arch-s3c2410/dma.h index b011e14f3bc..72964f9b841 100644 --- a/include/asm-arm/arch-s3c2410/dma.h +++ b/include/asm-arm/arch-s3c2410/dma.h @@ -18,7 +18,6 @@ #ifndef __ASM_ARCH_DMA_H #define __ASM_ARCH_DMA_H __FILE__ -#include <linux/config.h> #include <linux/sysdev.h> #include "hardware.h" diff --git a/include/asm-arm/arch-s3c2410/entry-macro.S b/include/asm-arm/arch-s3c2410/entry-macro.S index 894c35cf3b1..e09a6b8ec15 100644 --- a/include/asm-arm/arch-s3c2410/entry-macro.S +++ b/include/asm-arm/arch-s3c2410/entry-macro.S @@ -18,8 +18,6 @@ #define INTPND (0x10) #define INTOFFSET (0x14) -#define EXTINTPEND (0xa8) -#define EXTINTMASK (0xa4) #include <asm/hardware.h> #include <asm/arch/irqs.h> @@ -28,37 +26,23 @@ mov \base, #S3C24XX_VA_IRQ - ldr \irqstat, [ \base, #INTPND] - bics \irqnr, \irqstat, #3<<4 @@ only an GPIO IRQ - beq 2000f - @@ try the interrupt offset register, since it is there + ldr \irqstat, [ \base, #INTPND ] + teq \irqstat, #0 + beq 1002f ldr \irqnr, [ \base, #INTOFFSET ] mov \tmp, #1 tst \irqstat, \tmp, lsl \irqnr - addne \irqnr, \irqnr, #IRQ_EINT0 bne 1001f @@ the number specified is not a valid irq, so try @@ and work it out for ourselves - mov \irqnr, #IRQ_EINT0 @@ start here - b 3000f - -2000: - @@ load the GPIO interrupt register, and check it - - add \tmp, \base, #S3C24XX_VA_GPIO - S3C24XX_VA_IRQ - ldr \irqstat, [ \tmp, # EXTINTPEND ] - ldr \irqnr, [ \tmp, # EXTINTMASK ] - bics \irqstat, \irqstat, \irqnr - beq 1001f - - mov \irqnr, #(IRQ_EINT4 - 4) + mov \irqnr, #0 @@ start here @@ work out which irq (if any) we got -3000: + movs \tmp, \irqstat, lsl#16 addeq \irqnr, \irqnr, #16 moveq \irqstat, \irqstat, lsr#16 @@ -75,9 +59,9 @@ addeq \irqnr, \irqnr, #1 @@ we have the value - movs \irqnr, \irqnr - 1001: + adds \irqnr, \irqnr, #IRQ_EINT0 +1002: @@ exit here, Z flag unset if IRQ .endm diff --git a/include/asm-arm/arch-s3c2410/map.h b/include/asm-arm/arch-s3c2410/map.h index c380d264a84..fae2766ff32 100644 --- a/include/asm-arm/arch-s3c2410/map.h +++ b/include/asm-arm/arch-s3c2410/map.h @@ -126,9 +126,18 @@ #define S3C24XX_SZ_IIS SZ_1M /* GPIO ports */ -#define S3C24XX_VA_GPIO S3C2410_ADDR(0x00E00000) + +/* the calculation for the VA of this must ensure that + * it is the same distance apart from the UART in the + * phsyical address space, as the initial mapping for the IO + * is done as a 1:1 maping. This puts it (currently) at + * 0xF6800000, which is not in the way of any current mapping + * by the base system. +*/ + #define S3C2400_PA_GPIO (0x15600000) #define S3C2410_PA_GPIO (0x56000000) +#define S3C24XX_VA_GPIO ((S3C2410_PA_GPIO - S3C24XX_PA_UART) + S3C24XX_VA_UART) #define S3C24XX_SZ_GPIO SZ_1M /* RTC */ @@ -227,4 +236,20 @@ #define S3C24XX_PA_SPI S3C2410_PA_SPI #endif +/* deal with the registers that move under the 2412/2413 */ + +#if defined(CONFIG_CPU_S3C2412) || defined(CONFIG_CPU_S3C2413) +#ifndef __ASSEMBLY__ +extern void __iomem *s3c24xx_va_gpio2; +#endif +#ifdef CONFIG_CPU_S3C2412_ONLY +#define S3C24XX_VA_GPIO2 (S3C24XX_VA_GPIO + 0x10) +#else +#define S3C24XX_VA_GPIO2 s3c24xx_va_gpio2 +#endif +#else +#define s3c24xx_va_gpio2 S3C24XX_VA_GPIO +#define S3C24XX_VA_GPIO2 S3C24XX_VA_GPIO +#endif + #endif /* __ASM_ARCH_MAP_H */ diff --git a/include/asm-arm/arch-s3c2410/regs-clock.h b/include/asm-arm/arch-s3c2410/regs-clock.h index 34360706e01..a7c61feb843 100644 --- a/include/asm-arm/arch-s3c2410/regs-clock.h +++ b/include/asm-arm/arch-s3c2410/regs-clock.h @@ -1,6 +1,6 @@ /* linux/include/asm/arch-s3c2410/regs-clock.h * - * Copyright (c) 2003,2004,2005 Simtec Electronics <linux@simtec.co.uk> + * Copyright (c) 2003,2004,2005,2006 Simtec Electronics <linux@simtec.co.uk> * http://armlinux.simtec.co.uk/ * * This program is free software; you can redistribute it and/or modify @@ -114,7 +114,7 @@ s3c2410_get_pll(unsigned int pllval, unsigned int baseclk) #endif /* __ASSEMBLY__ */ -#ifdef CONFIG_CPU_S3C2440 +#if defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2442) /* extra registers */ #define S3C2440_CAMDIVN S3C2410_CLKREG(0x18) @@ -136,7 +136,70 @@ s3c2410_get_pll(unsigned int pllval, unsigned int baseclk) #define S3C2440_CAMDIVN_HCLK4_HALF (1<<9) #define S3C2440_CAMDIVN_DVSEN (1<<12) -#endif /* CONFIG_CPU_S3C2440 */ - +#define S3C2442_CAMDIVN_CAMCLK_DIV3 (1<<5) + +#endif /* CONFIG_CPU_S3C2440 or CONFIG_CPU_S3C2442 */ + +#if defined(CONFIG_CPU_S3C2412) || defined(CONFIG_CPU_S3C2413) + +#define S3C2412_OSCSET S3C2410_CLKREG(0x18) +#define S3C2412_CLKSRC S3C2410_CLKREG(0x1C) + +#define S3C2412_PLLCON_OFF (1<<20) + +#define S3C2412_CLKDIVN_PDIVN (1<<2) +#define S3C2412_CLKDIVN_HDIVN_MASK (3<<0) +#define S3C2421_CLKDIVN_ARMDIVN (1<<3) +#define S3C2412_CLKDIVN_USB48DIV (1<<6) +#define S3C2412_CLKDIVN_UARTDIV_MASK (15<<8) +#define S3C2412_CLKDIVN_UARTDIV_SHIFT (8) +#define S3C2412_CLKDIVN_I2SDIV_MASK (15<<12) +#define S3C2412_CLKDIVN_I2SDIV_SHIFT (12) +#define S3C2412_CLKDIVN_CAMDIV_MASK (15<<16) +#define S3C2412_CLKDIVN_CAMDIV_SHIFT (16) + +#define S3C2412_CLKCON_WDT (1<<28) +#define S3C2412_CLKCON_SPI (1<<27) +#define S3C2412_CLKCON_IIS (1<<26) +#define S3C2412_CLKCON_IIC (1<<25) +#define S3C2412_CLKCON_ADC (1<<24) +#define S3C2412_CLKCON_RTC (1<<23) +#define S3C2412_CLKCON_GPIO (1<<22) +#define S3C2412_CLKCON_UART2 (1<<21) +#define S3C2412_CLKCON_UART1 (1<<20) +#define S3C2412_CLKCON_UART0 (1<<19) +#define S3C2412_CLKCON_SDI (1<<18) +#define S3C2412_CLKCON_PWMT (1<<17) +#define S3C2412_CLKCON_USBD (1<<16) +#define S3C2412_CLKCON_CAMCLK (1<<15) +#define S3C2412_CLKCON_UARTCLK (1<<14) +/* missing 13 */ +#define S3C2412_CLKCON_USB_HOST48 (1<<12) +#define S3C2412_CLKCON_USB_DEV48 (1<<11) +#define S3C2412_CLKCON_HCLKdiv2 (1<<10) +#define S3C2412_CLKCON_HCLKx2 (1<<9) +#define S3C2412_CLKCON_SDRAM (1<<8) +/* missing 7 */ +#define S3C2412_CLKCON_USBH S3C2410_CLKCON_USBH +#define S3C2412_CLKCON_LCDC S3C2410_CLKCON_LCDC +#define S3C2412_CLKCON_NAND S3C2410_CLKCON_NAND +#define S3C2412_CLKCON_DMA3 (1<<3) +#define S3C2412_CLKCON_DMA2 (1<<2) +#define S3C2412_CLKCON_DMA1 (1<<1) +#define S3C2412_CLKCON_DMA0 (1<<0) + +/* clock sourec controls */ + +#define S3C2412_CLKSRC_EXTCLKDIV_MASK (7 << 0) +#define S3C2412_CLKSRC_EXTCLKDIV_SHIFT (0) +#define S3C2412_CLKSRC_MDIVCLK_EXTCLKDIV (1<<3) +#define S3C2412_CLKSRC_MSYSCLK_MPLL (1<<4) +#define S3C2412_CLKSRC_USYSCLK_UPLL (1<<5) +#define S3C2412_CLKSRC_UARTCLK_MPLL (1<<8) +#define S3C2412_CLKSRC_I2SCLK_MPLL (1<<9) +#define S3C2412_CLKSRC_USBCLK_HCLK (1<<10) +#define S3C2412_CLKSRC_CAMCLK_HCLK (1<<11) + +#endif /* CONFIG_CPU_S3C2412 | CONFIG_CPU_S3C2413 */ #endif /* __ASM_ARM_REGS_CLOCK */ diff --git a/include/asm-arm/arch-s3c2410/regs-dsc.h b/include/asm-arm/arch-s3c2410/regs-dsc.h index a023b0434ef..a0a12487516 100644 --- a/include/asm-arm/arch-s3c2410/regs-dsc.h +++ b/include/asm-arm/arch-s3c2410/regs-dsc.h @@ -7,18 +7,19 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. * - * S3C2440 Signal Drive Strength Control - * - * Changelog: - * 11-Aug-2004 BJD Created file - * 25-Aug-2004 BJD Added the _SELECT_* defs for using with functions + * S3C2440/S3C2412 Signal Drive Strength Control */ #ifndef __ASM_ARCH_REGS_DSC_H #define __ASM_ARCH_REGS_DSC_H "2440-dsc" -#ifdef CONFIG_CPU_S3C2440 +#if defined(CONFIG_CPU_S3C2412) +#define S3C2412_DSC0 S3C2410_GPIOREG(0xdc) +#define S3C2412_DSC1 S3C2410_GPIOREG(0xe0) +#endif + +#if defined(CONFIG_CPU_S3C2440) #define S3C2440_DSC0 S3C2410_GPIOREG(0xc4) #define S3C2440_DSC1 S3C2410_GPIOREG(0xc8) @@ -170,7 +171,7 @@ #define S3C2440_DSC1_CS1_4mA (3<<2) #define S3C2440_DSC1_CS1_MASK (3<<2) -#define S3C2440_DSC1_CS0 (S3C2440_SELECT_DSC1 | 0 +#define S3C2440_DSC1_CS0 (S3C2440_SELECT_DSC1 | 0) #define S3C2440_DSC1_CS0_10mA (0<<0) #define S3C2440_DSC1_CS0_8mA (1<<0) #define S3C2440_DSC1_CS0_6mA (2<<0) diff --git a/include/asm-arm/arch-s3c2410/regs-gpio.h b/include/asm-arm/arch-s3c2410/regs-gpio.h index d2574084697..6dd17f0f84e 100644 --- a/include/asm-arm/arch-s3c2410/regs-gpio.h +++ b/include/asm-arm/arch-s3c2410/regs-gpio.h @@ -45,7 +45,7 @@ #define S3C24XX_MISCCR S3C2400_MISCCR #else #define S3C24XX_GPIO_BASE(x) S3C2410_GPIO_BASE(x) -#define S3C24XX_MISCCR S3C2410_MISCCR +#define S3C24XX_MISCCR S3C24XX_GPIOREG2(0x80) #endif /* CONFIG_CPU_S3C2400 */ @@ -73,9 +73,15 @@ #define S3C2410_GPIO_SFN2 (0xFFFFFFF2) /* not available on A */ #define S3C2410_GPIO_SFN3 (0xFFFFFFF3) /* not available on A */ -/* configure GPIO ports A..G */ +/* register address for the GPIO registers. + * S3C24XX_GPIOREG2 is for the second set of registers in the + * GPIO which move between s3c2410 and s3c2412 type systems */ #define S3C2410_GPIOREG(x) ((x) + S3C24XX_VA_GPIO) +#define S3C24XX_GPIOREG2(x) ((x) + S3C24XX_VA_GPIO2) + + +/* configure GPIO ports A..G */ /* port A - S3C2410: 22bits, zero in bit X makes pin X output * S3C2400: 18bits, zero in bit X makes pin X output @@ -450,12 +456,14 @@ #define S3C2410_GPD0_OUTP (0x01 << 0) #define S3C2410_GPD0_VD8 (0x02 << 0) #define S3C2400_GPD0_VFRAME (0x02 << 0) +#define S3C2442_GPD0_nSPICS1 (0x03 << 0) #define S3C2410_GPD1 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 1) #define S3C2410_GPD1_INP (0x00 << 2) #define S3C2410_GPD1_OUTP (0x01 << 2) #define S3C2410_GPD1_VD9 (0x02 << 2) #define S3C2400_GPD1_VM (0x02 << 2) +#define S3C2442_GPD1_SPICLK1 (0x03 << 2) #define S3C2410_GPD2 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 2) #define S3C2410_GPD2_INP (0x00 << 4) @@ -858,6 +866,7 @@ #define S3C2410_GPG12_OUTP (0x01 << 24) #define S3C2410_GPG12_EINT20 (0x02 << 24) #define S3C2410_GPG12_XMON (0x03 << 24) +#define S3C2442_GPG12_nSPICS0 (0x03 << 24) #define S3C2410_GPG13 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 13) #define S3C2410_GPG13_INP (0x00 << 26) @@ -943,17 +952,25 @@ #define S3C2410_GPH9_INP (0x00 << 18) #define S3C2410_GPH9_OUTP (0x01 << 18) #define S3C2410_GPH9_CLKOUT0 (0x02 << 18) +#define S3C2442_GPH9_nSPICS0 (0x03 << 18) #define S3C2410_GPH10 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 10) #define S3C2410_GPH10_INP (0x00 << 20) #define S3C2410_GPH10_OUTP (0x01 << 20) #define S3C2410_GPH10_CLKOUT1 (0x02 << 20) +/* The S3C2412 and S3C2413 move the GPJ register set to after + * GPH, which means all registers after 0x80 are now offset by 0x10 + * for the 2412/2413 from the 2410/2440/2442 +*/ + /* miscellaneous control */ #define S3C2400_MISCCR S3C2410_GPIOREG(0x54) #define S3C2410_MISCCR S3C2410_GPIOREG(0x80) #define S3C2410_DCLKCON S3C2410_GPIOREG(0x84) +#define S3C24XX_DCLKCON S3C24XX_GPIOREG2(0x84) + /* see clock.h for dclk definitions */ /* pullup control on databus */ @@ -981,6 +998,8 @@ #define S3C2410_MISCCR_CLK0_DCLK0 (5<<4) #define S3C2410_MISCCR_CLK0_MASK (7<<4) +#define S3C2412_MISCCR_CLK0_RTC (2<<4) + #define S3C2410_MISCCR_CLK1_MPLL (0<<8) #define S3C2410_MISCCR_CLK1_UPLL (1<<8) #define S3C2410_MISCCR_CLK1_FCLK (2<<8) @@ -989,6 +1008,8 @@ #define S3C2410_MISCCR_CLK1_DCLK1 (5<<8) #define S3C2410_MISCCR_CLK1_MASK (7<<8) +#define S3C2412_MISCCR_CLK1_CLKsrc (0<<8) + #define S3C2410_MISCCR_USBSUSPND0 (1<<12) #define S3C2410_MISCCR_USBSUSPND1 (1<<13) @@ -996,7 +1017,7 @@ #define S3C2410_MISCCR_nEN_SCLK0 (1<<17) #define S3C2410_MISCCR_nEN_SCLK1 (1<<18) -#define S3C2410_MISCCR_nEN_SCLKE (1<<19) +#define S3C2410_MISCCR_nEN_SCLKE (1<<19) /* not 2412 */ #define S3C2410_MISCCR_SDSLEEP (7<<17) /* external interrupt control... */ @@ -1013,6 +1034,10 @@ #define S3C2410_EXTINT1 S3C2410_GPIOREG(0x8C) #define S3C2410_EXTINT2 S3C2410_GPIOREG(0x90) +#define S3C24XX_EXTINT0 S3C24XX_GPIOREG2(0x88) +#define S3C24XX_EXTINT1 S3C24XX_GPIOREG2(0x8C) +#define S3C24XX_EXTINT2 S3C24XX_GPIOREG2(0x90) + /* values for S3C2410_EXTINT0/1/2 */ #define S3C2410_EXTINT_LOWLEV (0x00) #define S3C2410_EXTINT_HILEV (0x01) @@ -1026,6 +1051,11 @@ #define S3C2410_EINFLT2 S3C2410_GPIOREG(0x9C) #define S3C2410_EINFLT3 S3C2410_GPIOREG(0xA0) +#define S3C24XX_EINFLT0 S3C24XX_GPIOREG2(0x94) +#define S3C24XX_EINFLT1 S3C24XX_GPIOREG2(0x98) +#define S3C24XX_EINFLT2 S3C24XX_GPIOREG2(0x9C) +#define S3C24XX_EINFLT3 S3C24XX_GPIOREG2(0xA0) + /* values for interrupt filtering */ #define S3C2410_EINTFLT_PCLK (0x00) #define S3C2410_EINTFLT_EXTCLK (1<<7) @@ -1035,6 +1065,7 @@ /* GSTATUS have miscellaneous information in them * + * These move between s3c2410 and s3c2412 style systems. */ #define S3C2410_GSTATUS0 S3C2410_GPIOREG(0x0AC) @@ -1043,6 +1074,18 @@ #define S3C2410_GSTATUS3 S3C2410_GPIOREG(0x0B8) #define S3C2410_GSTATUS4 S3C2410_GPIOREG(0x0BC) +#define S3C2412_GSTATUS0 S3C2410_GPIOREG(0x0BC) +#define S3C2412_GSTATUS1 S3C2410_GPIOREG(0x0C0) +#define S3C2412_GSTATUS2 S3C2410_GPIOREG(0x0C4) +#define S3C2412_GSTATUS3 S3C2410_GPIOREG(0x0C8) +#define S3C2412_GSTATUS4 S3C2410_GPIOREG(0x0CC) + +#define S3C24XX_GSTATUS0 S3C24XX_GPIOREG2(0x0AC) +#define S3C24XX_GSTATUS1 S3C24XX_GPIOREG2(0x0B0) +#define S3C24XX_GSTATUS2 S3C24XX_GPIOREG2(0x0B4) +#define S3C24XX_GSTATUS3 S3C24XX_GPIOREG2(0x0B8) +#define S3C24XX_GSTATUS4 S3C24XX_GPIOREG2(0x0BC) + #define S3C2410_GSTATUS0_nWAIT (1<<3) #define S3C2410_GSTATUS0_NCON (1<<2) #define S3C2410_GSTATUS0_RnB (1<<1) @@ -1050,7 +1093,9 @@ #define S3C2410_GSTATUS1_IDMASK (0xffff0000) #define S3C2410_GSTATUS1_2410 (0x32410000) +#define S3C2410_GSTATUS1_2412 (0x32412001) #define S3C2410_GSTATUS1_2440 (0x32440000) +#define S3C2410_GSTATUS1_2442 (0x32440aaa) #define S3C2410_GSTATUS2_WTRESET (1<<2) #define S3C2410_GSTATUS2_OFFRESET (1<<1) @@ -1072,5 +1117,22 @@ #define S3C2400_OPENCR_OPC_MOSIDIS (0<<5) #define S3C2400_OPENCR_OPC_MOSIEN (1<<5) +/* 2412/2413 sleep configuration registers */ + +#define S3C2412_GPBSLPCON S3C2410_GPIOREG(0x1C) +#define S3C2412_GPCSLPCON S3C2410_GPIOREG(0x2C) +#define S3C2412_GPDSLPCON S3C2410_GPIOREG(0x3C) +#define S3C2412_GPESLPCON S3C2410_GPIOREG(0x4C) +#define S3C2412_GPFSLPCON S3C2410_GPIOREG(0x5C) +#define S3C2412_GPGSLPCON S3C2410_GPIOREG(0x6C) +#define S3C2412_GPHSLPCON S3C2410_GPIOREG(0x7C) + +/* definitions for each pin bit */ +#define S3C2412_SLPCON_LOW(x) ( 0x00 << ((x) * 2)) +#define S3C2412_SLPCON_HI(x) ( 0x01 << ((x) * 2)) +#define S3C2412_SLPCON_IN(x) ( 0x02 << ((x) * 2)) +#define S3C2412_SLPCON_PDWN(x) ( 0x03 << ((x) * 2)) +#define S3C2412_SLPCON_MASK(x) ( 0x03 << ((x) * 2)) + #endif /* __ASM_ARCH_REGS_GPIO_H */ diff --git a/include/asm-arm/arch-s3c2410/regs-gpioj.h b/include/asm-arm/arch-s3c2410/regs-gpioj.h index 3ad2324acc3..18edae50d0b 100644 --- a/include/asm-arm/arch-s3c2410/regs-gpioj.h +++ b/include/asm-arm/arch-s3c2410/regs-gpioj.h @@ -32,6 +32,11 @@ #define S3C2440_GPJDAT S3C2410_GPIOREG(0xd4) #define S3C2440_GPJUP S3C2410_GPIOREG(0xd8) +#define S3C2413_GPJCON S3C2410_GPIOREG(0x80) +#define S3C2413_GPJDAT S3C2410_GPIOREG(0x84) +#define S3C2413_GPJUP S3C2410_GPIOREG(0x88) +#define S3C2413_GPJSLPCON S3C2410_GPIOREG(0x8C) + #define S3C2440_GPJ0 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 0) #define S3C2440_GPJ0_INP (0x00 << 0) #define S3C2440_GPJ0_OUTP (0x01 << 0) diff --git a/include/asm-arm/arch-s3c2410/regs-irq.h b/include/asm-arm/arch-s3c2410/regs-irq.h index 24b7292df79..572fca5d9ac 100644 --- a/include/asm-arm/arch-s3c2410/regs-irq.h +++ b/include/asm-arm/arch-s3c2410/regs-irq.h @@ -23,6 +23,7 @@ #define S3C2410_IRQREG(x) ((x) + S3C24XX_VA_IRQ) #define S3C2410_EINTREG(x) ((x) + S3C24XX_VA_GPIO) +#define S3C24XX_EINTREG(x) ((x) + S3C24XX_VA_GPIO2) #define S3C2410_SRCPND S3C2410_IRQREG(0x000) #define S3C2410_INTMOD S3C2410_IRQREG(0x004) @@ -40,5 +41,10 @@ #define S3C2410_EINTMASK S3C2410_EINTREG(0x0A4) #define S3C2410_EINTPEND S3C2410_EINTREG(0X0A8) +#define S3C2412_EINTMASK S3C2410_EINTREG(0x0B4) +#define S3C2412_EINTPEND S3C2410_EINTREG(0X0B8) + +#define S3C24XX_EINTMASK S3C24XX_EINTREG(0x0A4) +#define S3C24XX_EINTPEND S3C24XX_EINTREG(0X0A8) #endif /* ___ASM_ARCH_REGS_IRQ_H */ diff --git a/include/asm-arm/arch-s3c2410/regs-nand.h b/include/asm-arm/arch-s3c2410/regs-nand.h index 7cff235e667..c1470c695c3 100644 --- a/include/asm-arm/arch-s3c2410/regs-nand.h +++ b/include/asm-arm/arch-s3c2410/regs-nand.h @@ -39,10 +39,19 @@ #define S3C2440_NFESTAT1 S3C2410_NFREG(0x28) #define S3C2440_NFMECC0 S3C2410_NFREG(0x2C) #define S3C2440_NFMECC1 S3C2410_NFREG(0x30) -#define S3C2440_NFSECC S3C2410_NFREG(0x34) +#define S3C2440_NFSECC S3C24E10_NFREG(0x34) #define S3C2440_NFSBLK S3C2410_NFREG(0x38) #define S3C2440_NFEBLK S3C2410_NFREG(0x3C) +#define S3C2412_NFSBLK S3C2410_NFREG(0x20) +#define S3C2412_NFEBLK S3C2410_NFREG(0x24) +#define S3C2412_NFSTAT S3C2410_NFREG(0x28) +#define S3C2412_NFMECC_ERR0 S3C2410_NFREG(0x2C) +#define S3C2412_NFMECC_ERR1 S3C2410_NFREG(0x30) +#define S3C2412_NFMECC0 S3C2410_NFREG(0x34) +#define S3C2412_NFMECC1 S3C2410_NFREG(0x38) +#define S3C2412_NFSECC S3C2410_NFREG(0x3C) + #define S3C2410_NFCONF_EN (1<<15) #define S3C2410_NFCONF_512BYTE (1<<14) #define S3C2410_NFCONF_4STEP (1<<13) @@ -77,5 +86,42 @@ #define S3C2440_NFSTAT_RnB_CHANGE (1<<2) #define S3C2440_NFSTAT_ILLEGAL_ACCESS (1<<3) +#define S3C2412_NFCONF_NANDBOOT (1<<31) +#define S3C2412_NFCONF_ECCCLKCON (1<<30) +#define S3C2412_NFCONF_ECC_MLC (1<<24) +#define S3C2412_NFCONF_TACLS_MASK (7<<12) /* 1 extra bit of Tacls */ + +#define S3C2412_NFCONT_ECC4_DIRWR (1<<18) +#define S3C2412_NFCONT_LOCKTIGHT (1<<17) +#define S3C2412_NFCONT_SOFTLOCK (1<<16) +#define S3C2412_NFCONT_ECC4_ENCINT (1<<13) +#define S3C2412_NFCONT_ECC4_DECINT (1<<12) +#define S3C2412_NFCONT_MAIN_ECC_LOCK (1<<7) +#define S3C2412_NFCONT_INIT_MAIN_ECC (1<<5) +#define S3C2412_NFCONT_nFCE1 (1<<2) +#define S3C2412_NFCONT_nFCE0 (1<<1) + +#define S3C2412_NFSTAT_ECC_ENCDONE (1<<7) +#define S3C2412_NFSTAT_ECC_DECDONE (1<<6) +#define S3C2412_NFSTAT_ILLEGAL_ACCESS (1<<5) +#define S3C2412_NFSTAT_RnB_CHANGE (1<<4) +#define S3C2412_NFSTAT_nFCE1 (1<<3) +#define S3C2412_NFSTAT_nFCE0 (1<<2) +#define S3C2412_NFSTAT_Res1 (1<<1) +#define S3C2412_NFSTAT_READY (1<<0) + +#define S3C2412_NFECCERR_SERRDATA(x) (((x) >> 21) & 0xf) +#define S3C2412_NFECCERR_SERRBIT(x) (((x) >> 18) & 0x7) +#define S3C2412_NFECCERR_MERRDATA(x) (((x) >> 7) & 0x3ff) +#define S3C2412_NFECCERR_MERRBIT(x) (((x) >> 4) & 0x7) +#define S3C2412_NFECCERR_SPARE_ERR(x) (((x) >> 2) & 0x3) +#define S3C2412_NFECCERR_MAIN_ERR(x) (((x) >> 2) & 0x3) +#define S3C2412_NFECCERR_NONE (0) +#define S3C2412_NFECCERR_1BIT (1) +#define S3C2412_NFECCERR_MULTIBIT (2) +#define S3C2412_NFECCERR_ECCAREA (3) + + + #endif /* __ASM_ARM_REGS_NAND */ diff --git a/include/asm-arm/arch-s3c2410/regs-serial.h b/include/asm-arm/arch-s3c2410/regs-serial.h index 83b01254c4a..93f651ae296 100644 --- a/include/asm-arm/arch-s3c2410/regs-serial.h +++ b/include/asm-arm/arch-s3c2410/regs-serial.h @@ -82,6 +82,12 @@ #define S3C2440_UCON2_DIVMASK (7 << 12) #define S3C2440_UCON_DIVSHIFT (12) +#define S3C2412_UCON_CLKMASK (3<<10) +#define S3C2412_UCON_UCLK (1<<10) +#define S3C2412_UCON_USYSCLK (3<<10) +#define S3C2412_UCON_PCLK (0<<10) +#define S3C2412_UCON_PCLK2 (2<<10) + #define S3C2410_UCON_UCLK (1<<10) #define S3C2410_UCON_SBREAK (1<<4) @@ -124,6 +130,15 @@ #define S3C2410_UMCOM_AFC (1<<4) #define S3C2410_UMCOM_RTS_LOW (1<<0) +#define S3C2412_UMCON_AFC_63 (0<<5) +#define S3C2412_UMCON_AFC_56 (1<<5) +#define S3C2412_UMCON_AFC_48 (2<<5) +#define S3C2412_UMCON_AFC_40 (3<<5) +#define S3C2412_UMCON_AFC_32 (4<<5) +#define S3C2412_UMCON_AFC_24 (5<<5) +#define S3C2412_UMCON_AFC_16 (6<<5) +#define S3C2412_UMCON_AFC_8 (7<<5) + #define S3C2410_UFSTAT_TXFULL (1<<9) #define S3C2410_UFSTAT_RXFULL (1<<8) #define S3C2410_UFSTAT_TXMASK (15<<4) diff --git a/include/asm-arm/arch-s3c2410/uncompress.h b/include/asm-arm/arch-s3c2410/uncompress.h index a6f6a0e44af..8e152a05e53 100644 --- a/include/asm-arm/arch-s3c2410/uncompress.h +++ b/include/asm-arm/arch-s3c2410/uncompress.h @@ -22,7 +22,6 @@ #ifndef __ASM_ARCH_UNCOMPRESS_H #define __ASM_ARCH_UNCOMPRESS_H -#include <linux/config.h> /* defines for UART registers */ #include "asm/arch/regs-serial.h" @@ -82,7 +81,8 @@ static void putc(int ch) while (1) { level = uart_rd(S3C2410_UFSTAT); - if (cpuid == S3C2410_GSTATUS1_2440) { + if (cpuid == S3C2410_GSTATUS1_2440 || + cpuid == S3C2410_GSTATUS1_2442) { level &= S3C2440_UFSTAT_TXMASK; level >>= S3C2440_UFSTAT_TXSHIFT; } else { @@ -130,7 +130,7 @@ static void arch_decomp_wdog_start(void) { __raw_writel(WDOG_COUNT, S3C2410_WTDAT); __raw_writel(WDOG_COUNT, S3C2410_WTCNT); - __raw_writel(S3C2410_WTCON_ENABLE | S3C2410_WTCON_DIV128 | S3C2410_WTCON_RSTEN | S3C2410_WTCON_PRESCALE(0x40), S3C2410_WTCON); + __raw_writel(S3C2410_WTCON_ENABLE | S3C2410_WTCON_DIV128 | S3C2410_WTCON_RSTEN | S3C2410_WTCON_PRESCALE(0x80), S3C2410_WTCON); } #else |