19 files changed, 0 insertions, 1280 deletions
diff --git a/include/asm-arm/plat-s3c/debug-macro.S b/include/asm-arm/plat-s3c/debug-macro.S
deleted file mode 100644
index 84c40b847da..00000000000
--- a/include/asm-arm/plat-s3c/debug-macro.S
+++ /dev/null
@@ -1,75 +0,0 @@
-/* linux/include/asm-arm/plat-s3c/debug-macro.S
- *
- * Copyright 2005, 2007 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <asm/plat-s3c/regs-serial.h>
-
-/* The S3C2440 implementations are used by default as they are the
- * most widely re-used */
-
-	.macro fifo_level_s3c2440 rd, rx
-		ldr	\rd, [ \rx, # S3C2410_UFSTAT ]
-		and	\rd, \rd, #S3C2440_UFSTAT_TXMASK
-	.endm
-
-#ifndef fifo_level
-#define fifo_level fifo_level_s3c2410
-#endif
-
-	.macro  fifo_full_s3c2440 rd, rx
-		ldr	\rd, [ \rx, # S3C2410_UFSTAT ]
-		tst	\rd, #S3C2440_UFSTAT_TXFULL
-	.endm
-
-#ifndef fifo_full
-#define fifo_full fifo_full_s3c2440
-#endif
-
-	.macro	senduart,rd,rx
-		strb 	\rd, [\rx, # S3C2410_UTXH ]
-	.endm
-
-	.macro	busyuart, rd, rx
-		ldr	\rd, [ \rx, # S3C2410_UFCON ]
-		tst	\rd, #S3C2410_UFCON_FIFOMODE	@ fifo enabled?
-		beq	1001f				@
-		@ FIFO enabled...
-1003:
-		fifo_full \rd, \rx
-		bne	1003b
-		b	1002f
-
-1001:
-		@ busy waiting for non fifo
-		ldr	\rd, [ \rx, # S3C2410_UTRSTAT ]
-		tst	\rd, #S3C2410_UTRSTAT_TXFE
-		beq	1001b
-
-1002:		@ exit busyuart
-	.endm
-
-	.macro	waituart,rd,rx
-		ldr	\rd, [ \rx, # S3C2410_UFCON ]
-		tst	\rd, #S3C2410_UFCON_FIFOMODE	@ fifo enabled?
-		beq	1001f				@
-		@ FIFO enabled...
-1003:
-		fifo_level \rd, \rx
-		teq	\rd, #0
-		bne	1003b
-		b	1002f
-1001:
-		@ idle waiting for non fifo
-		ldr	\rd, [ \rx, # S3C2410_UTRSTAT ]
-		tst	\rd, #S3C2410_UTRSTAT_TXFE
-		beq	1001b
-
-1002:		@ exit busyuart
-	.endm
diff --git a/include/asm-arm/plat-s3c/map.h b/include/asm-arm/plat-s3c/map.h
deleted file mode 100644
index b84289d32a5..00000000000
--- a/include/asm-arm/plat-s3c/map.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/* linux/include/asm-arm/plat-s3c/map.h
- *
- * Copyright 2003, 2007 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C - Memory map definitions (virtual addresses)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_PLAT_MAP_H
-#define __ASM_PLAT_MAP_H __FILE__
-
-/* Fit all our registers in at 0xF4000000 upwards, trying to use as
- * little of the VA space as possible so vmalloc and friends have a
- * better chance of getting memory.
- *
- * we try to ensure stuff like the IRQ registers are available for
- * an single MOVS instruction (ie, only 8 bits of set data)
- */
-
-#define S3C_ADDR_BASE	(0xF4000000)
-
-#ifndef __ASSEMBLY__
-#define S3C_ADDR(x)	((void __iomem __force *)S3C_ADDR_BASE + (x))
-#else
-#define S3C_ADDR(x)	(S3C_ADDR_BASE + (x))
-#endif
-
-#define S3C_VA_IRQ	S3C_ADDR(0x00000000)	/* irq controller(s) */
-#define S3C_VA_SYS	S3C_ADDR(0x00100000)	/* system control */
-#define S3C_VA_MEM	S3C_ADDR(0x00200000)	/* system control */
-#define S3C_VA_TIMER	S3C_ADDR(0x00300000)	/* timer block */
-#define S3C_VA_WATCHDOG	S3C_ADDR(0x00400000)	/* watchdog */
-#define S3C_VA_UART	S3C_ADDR(0x01000000)	/* UART */
-
-#endif /* __ASM_PLAT_MAP_H */
diff --git a/include/asm-arm/plat-s3c/regs-adc.h b/include/asm-arm/plat-s3c/regs-adc.h
deleted file mode 100644
index 4323cccc86c..00000000000
--- a/include/asm-arm/plat-s3c/regs-adc.h
+++ /dev/null
@@ -1,60 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/regs-adc.h
- *
- * Copyright (c) 2004 Shannon Holland <holland@loser.net>
- *
- * This program is free software; yosu can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C2410 ADC registers
-*/
-
-#ifndef __ASM_ARCH_REGS_ADC_H
-#define __ASM_ARCH_REGS_ADC_H "regs-adc.h"
-
-#define S3C2410_ADCREG(x) (x)
-
-#define S3C2410_ADCCON	   S3C2410_ADCREG(0x00)
-#define S3C2410_ADCTSC	   S3C2410_ADCREG(0x04)
-#define S3C2410_ADCDLY	   S3C2410_ADCREG(0x08)
-#define S3C2410_ADCDAT0	   S3C2410_ADCREG(0x0C)
-#define S3C2410_ADCDAT1	   S3C2410_ADCREG(0x10)
-
-
-/* ADCCON Register Bits */
-#define S3C2410_ADCCON_ECFLG		(1<<15)
-#define S3C2410_ADCCON_PRSCEN		(1<<14)
-#define S3C2410_ADCCON_PRSCVL(x)	(((x)&0xFF)<<6)
-#define S3C2410_ADCCON_PRSCVLMASK	(0xFF<<6)
-#define S3C2410_ADCCON_SELMUX(x)	(((x)&0x7)<<3)
-#define S3C2410_ADCCON_MUXMASK		(0x7<<3)
-#define S3C2410_ADCCON_STDBM		(1<<2)
-#define S3C2410_ADCCON_READ_START	(1<<1)
-#define S3C2410_ADCCON_ENABLE_START	(1<<0)
-#define S3C2410_ADCCON_STARTMASK	(0x3<<0)
-
-
-/* ADCTSC Register Bits */
-#define S3C2410_ADCTSC_YM_SEN		(1<<7)
-#define S3C2410_ADCTSC_YP_SEN		(1<<6)
-#define S3C2410_ADCTSC_XM_SEN		(1<<5)
-#define S3C2410_ADCTSC_XP_SEN		(1<<4)
-#define S3C2410_ADCTSC_PULL_UP_DISABLE	(1<<3)
-#define S3C2410_ADCTSC_AUTO_PST		(1<<2)
-#define S3C2410_ADCTSC_XY_PST(x)	(((x)&0x3)<<0)
-
-/* ADCDAT0 Bits */
-#define S3C2410_ADCDAT0_UPDOWN		(1<<15)
-#define S3C2410_ADCDAT0_AUTO_PST	(1<<14)
-#define S3C2410_ADCDAT0_XY_PST		(0x3<<12)
-#define S3C2410_ADCDAT0_XPDATA_MASK	(0x03FF)
-
-/* ADCDAT1 Bits */
-#define S3C2410_ADCDAT1_UPDOWN		(1<<15)
-#define S3C2410_ADCDAT1_AUTO_PST	(1<<14)
-#define S3C2410_ADCDAT1_XY_PST		(0x3<<12)
-#define S3C2410_ADCDAT1_YPDATA_MASK	(0x03FF)
-
-#endif /* __ASM_ARCH_REGS_ADC_H */
-
-
diff --git a/include/asm-arm/plat-s3c/regs-serial.h b/include/asm-arm/plat-s3c/regs-serial.h
deleted file mode 100644
index a0daa647b92..00000000000
--- a/include/asm-arm/plat-s3c/regs-serial.h
+++ /dev/null
@@ -1,232 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/regs-serial.h
- *
- *  From linux/include/asm-arm/hardware/serial_s3c2410.h
- *
- *  Internal header file for Samsung S3C2410 serial ports (UART0-2)
- *
- *  Copyright (C) 2002 Shane Nay (shane@minirl.com)
- *
- *  Additional defines, (c) 2003 Simtec Electronics (linux@simtec.co.uk)
- *
- *  Adapted from:
- *
- *  Internal header file for MX1ADS serial ports (UART1 & 2)
- *
- *  Copyright (C) 2002 Shane Nay (shane@minirl.com)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-*/
-
-#ifndef __ASM_ARM_REGS_SERIAL_H
-#define __ASM_ARM_REGS_SERIAL_H
-
-#define S3C24XX_VA_UART0      (S3C_VA_UART)
-#define S3C24XX_VA_UART1      (S3C_VA_UART + 0x4000 )
-#define S3C24XX_VA_UART2      (S3C_VA_UART + 0x8000 )
-#define S3C24XX_VA_UART3      (S3C_VA_UART + 0xC000 )
-
-#define S3C2410_PA_UART0      (S3C24XX_PA_UART)
-#define S3C2410_PA_UART1      (S3C24XX_PA_UART + 0x4000 )
-#define S3C2410_PA_UART2      (S3C24XX_PA_UART + 0x8000 )
-#define S3C2443_PA_UART3      (S3C24XX_PA_UART + 0xC000 )
-
-#define S3C2410_URXH	  (0x24)
-#define S3C2410_UTXH	  (0x20)
-#define S3C2410_ULCON	  (0x00)
-#define S3C2410_UCON	  (0x04)
-#define S3C2410_UFCON	  (0x08)
-#define S3C2410_UMCON	  (0x0C)
-#define S3C2410_UBRDIV	  (0x28)
-#define S3C2410_UTRSTAT	  (0x10)
-#define S3C2410_UERSTAT	  (0x14)
-#define S3C2410_UFSTAT	  (0x18)
-#define S3C2410_UMSTAT	  (0x1C)
-
-#define S3C2410_LCON_CFGMASK	  ((0xF<<3)|(0x3))
-
-#define S3C2410_LCON_CS5	  (0x0)
-#define S3C2410_LCON_CS6	  (0x1)
-#define S3C2410_LCON_CS7	  (0x2)
-#define S3C2410_LCON_CS8	  (0x3)
-#define S3C2410_LCON_CSMASK	  (0x3)
-
-#define S3C2410_LCON_PNONE	  (0x0)
-#define S3C2410_LCON_PEVEN	  (0x5 << 3)
-#define S3C2410_LCON_PODD	  (0x4 << 3)
-#define S3C2410_LCON_PMASK	  (0x7 << 3)
-
-#define S3C2410_LCON_STOPB	  (1<<2)
-#define S3C2410_LCON_IRM          (1<<6)
-
-#define S3C2440_UCON_CLKMASK	  (3<<10)
-#define S3C2440_UCON_PCLK	  (0<<10)
-#define S3C2440_UCON_UCLK	  (1<<10)
-#define S3C2440_UCON_PCLK2	  (2<<10)
-#define S3C2440_UCON_FCLK	  (3<<10)
-#define S3C2443_UCON_EPLL	  (3<<10)
-
-#define S3C2440_UCON2_FCLK_EN	  (1<<15)
-#define S3C2440_UCON0_DIVMASK	  (15 << 12)
-#define S3C2440_UCON1_DIVMASK	  (15 << 12)
-#define S3C2440_UCON2_DIVMASK	  (7 << 12)
-#define S3C2440_UCON_DIVSHIFT	  (12)
-
-#define S3C2412_UCON_CLKMASK	(3<<10)
-#define S3C2412_UCON_UCLK	(1<<10)
-#define S3C2412_UCON_USYSCLK	(3<<10)
-#define S3C2412_UCON_PCLK	(0<<10)
-#define S3C2412_UCON_PCLK2	(2<<10)
-
-#define S3C2410_UCON_UCLK	  (1<<10)
-#define S3C2410_UCON_SBREAK	  (1<<4)
-
-#define S3C2410_UCON_TXILEVEL	  (1<<9)
-#define S3C2410_UCON_RXILEVEL	  (1<<8)
-#define S3C2410_UCON_TXIRQMODE	  (1<<2)
-#define S3C2410_UCON_RXIRQMODE	  (1<<0)
-#define S3C2410_UCON_RXFIFO_TOI	  (1<<7)
-#define S3C2443_UCON_RXERR_IRQEN  (1<<6)
-#define S3C2443_UCON_LOOPBACK	  (1<<5)
-
-#define S3C2410_UCON_DEFAULT	  (S3C2410_UCON_TXILEVEL  | \
-				   S3C2410_UCON_RXILEVEL  | \
-				   S3C2410_UCON_TXIRQMODE | \
-				   S3C2410_UCON_RXIRQMODE | \
-				   S3C2410_UCON_RXFIFO_TOI)
-
-#define S3C2410_UFCON_FIFOMODE	  (1<<0)
-#define S3C2410_UFCON_TXTRIG0	  (0<<6)
-#define S3C2410_UFCON_RXTRIG8	  (1<<4)
-#define S3C2410_UFCON_RXTRIG12	  (2<<4)
-
-/* S3C2440 FIFO trigger levels */
-#define S3C2440_UFCON_RXTRIG1	  (0<<4)
-#define S3C2440_UFCON_RXTRIG8	  (1<<4)
-#define S3C2440_UFCON_RXTRIG16	  (2<<4)
-#define S3C2440_UFCON_RXTRIG32	  (3<<4)
-
-#define S3C2440_UFCON_TXTRIG0	  (0<<6)
-#define S3C2440_UFCON_TXTRIG16	  (1<<6)
-#define S3C2440_UFCON_TXTRIG32	  (2<<6)
-#define S3C2440_UFCON_TXTRIG48	  (3<<6)
-
-#define S3C2410_UFCON_RESETBOTH	  (3<<1)
-#define S3C2410_UFCON_RESETTX	  (1<<2)
-#define S3C2410_UFCON_RESETRX	  (1<<1)
-
-#define S3C2410_UFCON_DEFAULT	  (S3C2410_UFCON_FIFOMODE | \
-				   S3C2410_UFCON_TXTRIG0  | \
-				   S3C2410_UFCON_RXTRIG8 )
-
-#define	S3C2410_UMCOM_AFC	  (1<<4)
-#define	S3C2410_UMCOM_RTS_LOW	  (1<<0)
-
-#define S3C2412_UMCON_AFC_63	(0<<5)		/* same as s3c2443 */
-#define S3C2412_UMCON_AFC_56	(1<<5)
-#define S3C2412_UMCON_AFC_48	(2<<5)
-#define S3C2412_UMCON_AFC_40	(3<<5)
-#define S3C2412_UMCON_AFC_32	(4<<5)
-#define S3C2412_UMCON_AFC_24	(5<<5)
-#define S3C2412_UMCON_AFC_16	(6<<5)
-#define S3C2412_UMCON_AFC_8	(7<<5)
-
-#define S3C2410_UFSTAT_TXFULL	  (1<<9)
-#define S3C2410_UFSTAT_RXFULL	  (1<<8)
-#define S3C2410_UFSTAT_TXMASK	  (15<<4)
-#define S3C2410_UFSTAT_TXSHIFT	  (4)
-#define S3C2410_UFSTAT_RXMASK	  (15<<0)
-#define S3C2410_UFSTAT_RXSHIFT	  (0)
-
-/* UFSTAT S3C2443 same as S3C2440 */
-#define S3C2440_UFSTAT_TXFULL	  (1<<14)
-#define S3C2440_UFSTAT_RXFULL	  (1<<6)
-#define S3C2440_UFSTAT_TXSHIFT	  (8)
-#define S3C2440_UFSTAT_RXSHIFT	  (0)
-#define S3C2440_UFSTAT_TXMASK	  (63<<8)
-#define S3C2440_UFSTAT_RXMASK	  (63)
-
-#define S3C2410_UTRSTAT_TXE	  (1<<2)
-#define S3C2410_UTRSTAT_TXFE	  (1<<1)
-#define S3C2410_UTRSTAT_RXDR	  (1<<0)
-
-#define S3C2410_UERSTAT_OVERRUN	  (1<<0)
-#define S3C2410_UERSTAT_FRAME	  (1<<2)
-#define S3C2410_UERSTAT_BREAK	  (1<<3)
-#define S3C2443_UERSTAT_PARITY	  (1<<1)
-
-#define S3C2410_UERSTAT_ANY	  (S3C2410_UERSTAT_OVERRUN | \
-				   S3C2410_UERSTAT_FRAME | \
-				   S3C2410_UERSTAT_BREAK)
-
-#define S3C2410_UMSTAT_CTS	  (1<<0)
-#define S3C2410_UMSTAT_DeltaCTS	  (1<<2)
-
-#define S3C2443_DIVSLOT		  (0x2C)
-
-#ifndef __ASSEMBLY__
-
-/* struct s3c24xx_uart_clksrc
- *
- * this structure defines a named clock source that can be used for the
- * uart, so that the best clock can be selected for the requested baud
- * rate.
- *
- * min_baud and max_baud define the range of baud-rates this clock is
- * acceptable for, if they are both zero, it is assumed any baud rate that
- * can be generated from this clock will be used.
- *
- * divisor gives the divisor from the clock to the one seen by the uart
-*/
-
-struct s3c24xx_uart_clksrc {
-	const char	*name;
-	unsigned int	 divisor;
-	unsigned int	 min_baud;
-	unsigned int	 max_baud;
-};
-
-/* configuration structure for per-machine configurations for the
- * serial port
- *
- * the pointer is setup by the machine specific initialisation from the
- * arch/arm/mach-s3c2410/ directory.
-*/
-
-struct s3c2410_uartcfg {
-	unsigned char	   hwport;	 /* hardware port number */
-	unsigned char	   unused;
-	unsigned short	   flags;
-	upf_t		   uart_flags;	 /* default uart flags */
-
-	unsigned long	   ucon;	 /* value of ucon for port */
-	unsigned long	   ulcon;	 /* value of ulcon for port */
-	unsigned long	   ufcon;	 /* value of ufcon for port */
-
-	struct s3c24xx_uart_clksrc *clocks;
-	unsigned int		    clocks_size;
-};
-
-/* s3c24xx_uart_devs
- *
- * this is exported from the core as we cannot use driver_register(),
- * or platform_add_device() before the console_initcall()
-*/
-
-extern struct platform_device *s3c24xx_uart_devs[3];
-
-#endif /* __ASSEMBLY__ */
-
-#endif /* __ASM_ARM_REGS_SERIAL_H */
-
diff --git a/include/asm-arm/plat-s3c/regs-timer.h b/include/asm-arm/plat-s3c/regs-timer.h
deleted file mode 100644
index cc0eedd53e3..00000000000
--- a/include/asm-arm/plat-s3c/regs-timer.h
+++ /dev/null
@@ -1,115 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/regs-timer.h
- *
- * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk>
- *		      http://www.simtec.co.uk/products/SWLINUX/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C2410 Timer configuration
-*/
-
-
-#ifndef __ASM_ARCH_REGS_TIMER_H
-#define __ASM_ARCH_REGS_TIMER_H
-
-#define S3C_TIMERREG(x) (S3C_VA_TIMER + (x))
-#define S3C_TIMERREG2(tmr,reg) S3C_TIMERREG((reg)+0x0c+((tmr)*0x0c))
-
-#define S3C2410_TCFG0	      S3C_TIMERREG(0x00)
-#define S3C2410_TCFG1	      S3C_TIMERREG(0x04)
-#define S3C2410_TCON	      S3C_TIMERREG(0x08)
-
-#define S3C2410_TCFG_PRESCALER0_MASK (255<<0)
-#define S3C2410_TCFG_PRESCALER1_MASK (255<<8)
-#define S3C2410_TCFG_PRESCALER1_SHIFT (8)
-#define S3C2410_TCFG_DEADZONE_MASK   (255<<16)
-#define S3C2410_TCFG_DEADZONE_SHIFT  (16)
-
-#define S3C2410_TCFG1_MUX4_DIV2	  (0<<16)
-#define S3C2410_TCFG1_MUX4_DIV4	  (1<<16)
-#define S3C2410_TCFG1_MUX4_DIV8	  (2<<16)
-#define S3C2410_TCFG1_MUX4_DIV16  (3<<16)
-#define S3C2410_TCFG1_MUX4_TCLK1  (4<<16)
-#define S3C2410_TCFG1_MUX4_MASK	  (15<<16)
-#define S3C2410_TCFG1_MUX4_SHIFT  (16)
-
-#define S3C2410_TCFG1_MUX3_DIV2	  (0<<12)
-#define S3C2410_TCFG1_MUX3_DIV4	  (1<<12)
-#define S3C2410_TCFG1_MUX3_DIV8	  (2<<12)
-#define S3C2410_TCFG1_MUX3_DIV16  (3<<12)
-#define S3C2410_TCFG1_MUX3_TCLK1  (4<<12)
-#define S3C2410_TCFG1_MUX3_MASK	  (15<<12)
-
-
-#define S3C2410_TCFG1_MUX2_DIV2	  (0<<8)
-#define S3C2410_TCFG1_MUX2_DIV4	  (1<<8)
-#define S3C2410_TCFG1_MUX2_DIV8	  (2<<8)
-#define S3C2410_TCFG1_MUX2_DIV16  (3<<8)
-#define S3C2410_TCFG1_MUX2_TCLK1  (4<<8)
-#define S3C2410_TCFG1_MUX2_MASK	  (15<<8)
-
-
-#define S3C2410_TCFG1_MUX1_DIV2	  (0<<4)
-#define S3C2410_TCFG1_MUX1_DIV4	  (1<<4)
-#define S3C2410_TCFG1_MUX1_DIV8	  (2<<4)
-#define S3C2410_TCFG1_MUX1_DIV16  (3<<4)
-#define S3C2410_TCFG1_MUX1_TCLK0  (4<<4)
-#define S3C2410_TCFG1_MUX1_MASK	  (15<<4)
-
-#define S3C2410_TCFG1_MUX0_DIV2	  (0<<0)
-#define S3C2410_TCFG1_MUX0_DIV4	  (1<<0)
-#define S3C2410_TCFG1_MUX0_DIV8	  (2<<0)
-#define S3C2410_TCFG1_MUX0_DIV16  (3<<0)
-#define S3C2410_TCFG1_MUX0_TCLK0  (4<<0)
-#define S3C2410_TCFG1_MUX0_MASK	  (15<<0)
-
-#define S3C2410_TCFG1_MUX_DIV2	  (0<<0)
-#define S3C2410_TCFG1_MUX_DIV4	  (1<<0)
-#define S3C2410_TCFG1_MUX_DIV8	  (2<<0)
-#define S3C2410_TCFG1_MUX_DIV16   (3<<0)
-#define S3C2410_TCFG1_MUX_TCLK    (4<<0)
-#define S3C2410_TCFG1_MUX_MASK	  (15<<0)
-
-#define S3C2410_TCFG1_SHIFT(x)	  ((x) * 4)
-
-/* for each timer, we have an count buffer, an compare buffer and
- * an observation buffer
-*/
-
-/* WARNING - timer 4 has no buffer reg, and it's observation is at +4 */
-
-#define S3C2410_TCNTB(tmr)    S3C_TIMERREG2(tmr, 0x00)
-#define S3C2410_TCMPB(tmr)    S3C_TIMERREG2(tmr, 0x04)
-#define S3C2410_TCNTO(tmr)    S3C_TIMERREG2(tmr, (((tmr) == 4) ? 0x04 : 0x08))
-
-#define S3C2410_TCON_T4RELOAD	  (1<<22)
-#define S3C2410_TCON_T4MANUALUPD  (1<<21)
-#define S3C2410_TCON_T4START	  (1<<20)
-
-#define S3C2410_TCON_T3RELOAD	  (1<<19)
-#define S3C2410_TCON_T3INVERT	  (1<<18)
-#define S3C2410_TCON_T3MANUALUPD  (1<<17)
-#define S3C2410_TCON_T3START	  (1<<16)
-
-#define S3C2410_TCON_T2RELOAD	  (1<<15)
-#define S3C2410_TCON_T2INVERT	  (1<<14)
-#define S3C2410_TCON_T2MANUALUPD  (1<<13)
-#define S3C2410_TCON_T2START	  (1<<12)
-
-#define S3C2410_TCON_T1RELOAD	  (1<<11)
-#define S3C2410_TCON_T1INVERT	  (1<<10)
-#define S3C2410_TCON_T1MANUALUPD  (1<<9)
-#define S3C2410_TCON_T1START	  (1<<8)
-
-#define S3C2410_TCON_T0DEADZONE	  (1<<4)
-#define S3C2410_TCON_T0RELOAD	  (1<<3)
-#define S3C2410_TCON_T0INVERT	  (1<<2)
-#define S3C2410_TCON_T0MANUALUPD  (1<<1)
-#define S3C2410_TCON_T0START	  (1<<0)
-
-#endif /*  __ASM_ARCH_REGS_TIMER_H */
-
-
-
diff --git a/include/asm-arm/plat-s3c/uncompress.h b/include/asm-arm/plat-s3c/uncompress.h
deleted file mode 100644
index 19b9eda3948..00000000000
--- a/include/asm-arm/plat-s3c/uncompress.h
+++ /dev/null
@@ -1,155 +0,0 @@
-/* linux/include/asm-arm/plat-s3c/uncompress.h
- *
- * Copyright 2003, 2007 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C - uncompress code
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_PLAT_UNCOMPRESS_H
-#define __ASM_PLAT_UNCOMPRESS_H
-
-typedef unsigned int upf_t;	/* cannot include linux/serial_core.h */
-
-/* uart setup */
-
-static unsigned int fifo_mask;
-static unsigned int fifo_max;
-
-/* forward declerations */
-
-static void arch_detect_cpu(void);
-
-/* defines for UART registers */
-
-#include <asm/plat-s3c/regs-serial.h>
-#include <asm/plat-s3c/regs-watchdog.h>
-
-/* working in physical space... */
-#undef S3C2410_WDOGREG
-#define S3C2410_WDOGREG(x) ((S3C24XX_PA_WATCHDOG + (x)))
-
-/* how many bytes we allow into the FIFO at a time in FIFO mode */
-#define FIFO_MAX	 (14)
-
-#define uart_base S3C24XX_PA_UART + (0x4000*CONFIG_S3C_LOWLEVEL_UART_PORT)
-
-static __inline__ void
-uart_wr(unsigned int reg, unsigned int val)
-{
-	volatile unsigned int *ptr;
-
-	ptr = (volatile unsigned int *)(reg + uart_base);
-	*ptr = val;
-}
-
-static __inline__ unsigned int
-uart_rd(unsigned int reg)
-{
-	volatile unsigned int *ptr;
-
-	ptr = (volatile unsigned int *)(reg + uart_base);
-	return *ptr;
-}
-
-/* we can deal with the case the UARTs are being run
- * in FIFO mode, so that we don't hold up our execution
- * waiting for tx to happen...
-*/
-
-static void putc(int ch)
-{
-	if (uart_rd(S3C2410_UFCON) & S3C2410_UFCON_FIFOMODE) {
-		int level;
-
-		while (1) {
-			level = uart_rd(S3C2410_UFSTAT);
-			level &= fifo_mask;
-
-			if (level < fifo_max)
-				break;
-		}
-
-	} else {
-		/* not using fifos */
-
-		while ((uart_rd(S3C2410_UTRSTAT) & S3C2410_UTRSTAT_TXE) != S3C2410_UTRSTAT_TXE)
-			barrier();
-	}
-
-	/* write byte to transmission register */
-	uart_wr(S3C2410_UTXH, ch);
-}
-
-static inline void flush(void)
-{
-}
-
-#define __raw_writel(d,ad) do { *((volatile unsigned int *)(ad)) = (d); } while(0)
-
-/* CONFIG_S3C_BOOT_WATCHDOG
- *
- * Simple boot-time watchdog setup, to reboot the system if there is
- * any problem with the boot process
-*/
-
-#ifdef CONFIG_S3C_BOOT_WATCHDOG
-
-#define WDOG_COUNT (0xff00)
-
-static inline void arch_decomp_wdog(void)
-{
-	__raw_writel(WDOG_COUNT, S3C2410_WTCNT);
-}
-
-static void arch_decomp_wdog_start(void)
-{
-	__raw_writel(WDOG_COUNT, S3C2410_WTDAT);
-	__raw_writel(WDOG_COUNT, S3C2410_WTCNT);
-	__raw_writel(S3C2410_WTCON_ENABLE | S3C2410_WTCON_DIV128 | S3C2410_WTCON_RSTEN | S3C2410_WTCON_PRESCALE(0x80), S3C2410_WTCON);
-}
-
-#else
-#define arch_decomp_wdog_start()
-#define arch_decomp_wdog()
-#endif
-
-#ifdef CONFIG_S3C_BOOT_ERROR_RESET
-
-static void arch_decomp_error(const char *x)
-{
-	putstr("\n\n");
-	putstr(x);
-	putstr("\n\n -- System resetting\n");
-
-	__raw_writel(0x4000, S3C2410_WTDAT);
-	__raw_writel(0x4000, S3C2410_WTCNT);
-	__raw_writel(S3C2410_WTCON_ENABLE | S3C2410_WTCON_DIV128 | S3C2410_WTCON_RSTEN | S3C2410_WTCON_PRESCALE(0x40), S3C2410_WTCON);
-
-	while(1);
-}
-
-#define arch_error arch_decomp_error
-#endif
-
-static void error(char *err);
-
-static void
-arch_decomp_setup(void)
-{
-	/* we may need to setup the uart(s) here if we are not running
-	 * on an BAST... the BAST will have left the uarts configured
-	 * after calling linux.
-	 */
-
-	arch_detect_cpu();
-	arch_decomp_wdog_start();
-}
-
-
-#endif /* __ASM_PLAT_UNCOMPRESS_H */
diff --git a/include/asm-arm/plat-s3c24xx/clock.h b/include/asm-arm/plat-s3c24xx/clock.h
deleted file mode 100644
index 235b753cd87..00000000000
--- a/include/asm-arm/plat-s3c24xx/clock.h
+++ /dev/null
@@ -1,64 +0,0 @@
-/* linux/include/asm-arm/plat-s3c24xx/clock.h
- * linux/arch/arm/mach-s3c2410/clock.h
- *
- * Copyright (c) 2004-2005 Simtec Electronics
- *	http://www.simtec.co.uk/products/SWLINUX/
- *	Written by Ben Dooks, <ben@simtec.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-struct clk {
-	struct list_head      list;
-	struct module        *owner;
-	struct clk           *parent;
-	const char           *name;
-	int		      id;
-	int		      usage;
-	unsigned long         rate;
-	unsigned long         ctrlbit;
-
-	int		    (*enable)(struct clk *, int enable);
-	int		    (*set_rate)(struct clk *c, unsigned long rate);
-	unsigned long	    (*get_rate)(struct clk *c);
-	unsigned long	    (*round_rate)(struct clk *c, unsigned long rate);
-	int		    (*set_parent)(struct clk *c, struct clk *parent);
-};
-
-/* other clocks which may be registered by board support */
-
-extern struct clk s3c24xx_dclk0;
-extern struct clk s3c24xx_dclk1;
-extern struct clk s3c24xx_clkout0;
-extern struct clk s3c24xx_clkout1;
-extern struct clk s3c24xx_uclk;
-
-extern struct clk clk_usb_bus;
-
-/* core clock support */
-
-extern struct clk clk_f;
-extern struct clk clk_h;
-extern struct clk clk_p;
-extern struct clk clk_mpll;
-extern struct clk clk_upll;
-extern struct clk clk_xtal;
-
-/* exports for arch/arm/mach-s3c2410
- *
- * Please DO NOT use these outside of arch/arm/mach-s3c2410
-*/
-
-extern struct mutex clocks_mutex;
-
-extern int s3c2410_clkcon_enable(struct clk *clk, int enable);
-
-extern int s3c24xx_register_clock(struct clk *clk);
-extern int s3c24xx_register_clocks(struct clk **clk, int nr_clks);
-
-extern int s3c24xx_setup_clocks(unsigned long xtal,
-				unsigned long fclk,
-				unsigned long hclk,
-				unsigned long pclk);
diff --git a/include/asm-arm/plat-s3c24xx/common-smdk.h b/include/asm-arm/plat-s3c24xx/common-smdk.h
deleted file mode 100644
index 58d9094c935..00000000000
--- a/include/asm-arm/plat-s3c24xx/common-smdk.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/* linux/include/asm-arm/plat-s3c24xx/common-smdk.h
- *
- * Copyright (c) 2006 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * Common code for SMDK2410 and SMDK2440 boards
- *
- * http://www.fluff.org/ben/smdk2440/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-extern void smdk_machine_init(void);
diff --git a/include/asm-arm/plat-s3c24xx/cpu.h b/include/asm-arm/plat-s3c24xx/cpu.h
deleted file mode 100644
index 23e420e8bd5..00000000000
--- a/include/asm-arm/plat-s3c24xx/cpu.h
+++ /dev/null
@@ -1,54 +0,0 @@
-/* linux/include/asm-arm/plat-s3c24xx/cpu.h
- *
- * Copyright (c) 2004-2005 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * Header file for S3C24XX CPU support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/* todo - fix when rmk changes iodescs to use `void __iomem *` */
-
-#define IODESC_ENT(x) { (unsigned long)S3C24XX_VA_##x, __phys_to_pfn(S3C24XX_PA_##x), S3C24XX_SZ_##x, MT_DEVICE }
-
-#ifndef MHZ
-#define MHZ (1000*1000)
-#endif
-
-#define print_mhz(m) ((m) / MHZ), ((m / 1000) % 1000)
-
-/* forward declaration */
-struct s3c24xx_uart_resources;
-struct platform_device;
-struct s3c2410_uartcfg;
-struct map_desc;
-
-/* core initialisation functions */
-
-extern void s3c24xx_init_irq(void);
-
-extern void s3c24xx_init_io(struct map_desc *mach_desc, int size);
-
-extern void s3c24xx_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-
-extern void s3c24xx_init_clocks(int xtal);
-
-extern void s3c24xx_init_uartdevs(char *name,
-				  struct s3c24xx_uart_resources *res,
-				  struct s3c2410_uartcfg *cfg, int no);
-
-/* timer for 2410/2440 */
-
-struct sys_timer;
-extern struct sys_timer s3c24xx_timer;
-
-/* system device classes */
-
-extern struct sysdev_class s3c2410_sysclass;
-extern struct sysdev_class s3c2412_sysclass;
-extern struct sysdev_class s3c2440_sysclass;
-extern struct sysdev_class s3c2442_sysclass;
-extern struct sysdev_class s3c2443_sysclass;
diff --git a/include/asm-arm/plat-s3c24xx/devs.h b/include/asm-arm/plat-s3c24xx/devs.h
deleted file mode 100644
index badaac9d64a..00000000000
--- a/include/asm-arm/plat-s3c24xx/devs.h
+++ /dev/null
@@ -1,49 +0,0 @@
-/* linux/include/asm-arm/plat-s3c24xx/devs.h
- *
- * Copyright (c) 2004 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * Header file for s3c2410 standard platform devices
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-#include <linux/platform_device.h>
-
-struct s3c24xx_uart_resources {
-	struct resource		*resources;
-	unsigned long		 nr_resources;
-};
-
-extern struct s3c24xx_uart_resources s3c2410_uart_resources[];
-
-extern struct platform_device *s3c24xx_uart_devs[];
-extern struct platform_device *s3c24xx_uart_src[];
-
-extern struct platform_device s3c_device_timer[];
-
-extern struct platform_device s3c_device_usb;
-extern struct platform_device s3c_device_lcd;
-extern struct platform_device s3c_device_wdt;
-extern struct platform_device s3c_device_i2c;
-extern struct platform_device s3c_device_iis;
-extern struct platform_device s3c_device_rtc;
-extern struct platform_device s3c_device_adc;
-extern struct platform_device s3c_device_sdi;
-extern struct platform_device s3c_device_hsmmc;
-
-extern struct platform_device s3c_device_spi0;
-extern struct platform_device s3c_device_spi1;
-
-extern struct platform_device s3c_device_nand;
-
-extern struct platform_device s3c_device_usbgadget;
-
-/* s3c2440 specific devices */
-
-#ifdef CONFIG_CPU_S3C2440
-
-extern struct platform_device s3c_device_camif;
-
-#endif
diff --git a/include/asm-arm/plat-s3c24xx/dma.h b/include/asm-arm/plat-s3c24xx/dma.h
deleted file mode 100644
index c78efe316fc..00000000000
--- a/include/asm-arm/plat-s3c24xx/dma.h
+++ /dev/null
@@ -1,82 +0,0 @@
-/* linux/include/asm-arm/plat-s3c24xx/dma.h
- *
- * Copyright (C) 2006 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * Samsung S3C24XX DMA support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-extern struct sysdev_class dma_sysclass;
-extern struct s3c2410_dma_chan s3c2410_chans[S3C2410_DMA_CHANNELS];
-
-#define DMA_CH_VALID		(1<<31)
-#define DMA_CH_NEVER		(1<<30)
-
-struct s3c24xx_dma_addr {
-	unsigned long		from;
-	unsigned long		to;
-};
-
-/* struct s3c24xx_dma_map
- *
- * this holds the mapping information for the channel selected
- * to be connected to the specified device
-*/
-
-struct s3c24xx_dma_map {
-	const char		*name;
-	struct s3c24xx_dma_addr  hw_addr;
-
-	unsigned long		 channels[S3C2410_DMA_CHANNELS];
-	unsigned long		 channels_rx[S3C2410_DMA_CHANNELS];
-};
-
-struct s3c24xx_dma_selection {
-	struct s3c24xx_dma_map	*map;
-	unsigned long		 map_size;
-	unsigned long		 dcon_mask;
-
-	void	(*select)(struct s3c2410_dma_chan *chan,
-			  struct s3c24xx_dma_map *map);
-
-	void	(*direction)(struct s3c2410_dma_chan *chan,
-			     struct s3c24xx_dma_map *map,
-			     enum s3c2410_dmasrc dir);
-};
-
-extern int s3c24xx_dma_init_map(struct s3c24xx_dma_selection *sel);
-
-/* struct s3c24xx_dma_order_ch
- *
- * channel map for one of the `enum dma_ch` dma channels. the list
- * entry contains a set of low-level channel numbers, orred with
- * DMA_CH_VALID, which are checked in the order in the array.
-*/
-
-struct s3c24xx_dma_order_ch {
-	unsigned int	list[S3C2410_DMA_CHANNELS];	/* list of channels */
-	unsigned int	flags;				/* flags */
-};
-
-/* struct s3c24xx_dma_order
- *
- * information provided by either the core or the board to give the
- * dma system a hint on how to allocate channels
-*/
-
-struct s3c24xx_dma_order {
-	struct s3c24xx_dma_order_ch	channels[DMACH_MAX];
-};
-
-extern int s3c24xx_dma_order_set(struct s3c24xx_dma_order *map);
-
-/* DMA init code, called from the cpu support code */
-
-extern int s3c2410_dma_init(void);
-
-extern int s3c24xx_dma_init(unsigned int channels, unsigned int irq,
-			    unsigned int stride);
diff --git a/include/asm-arm/plat-s3c24xx/irq.h b/include/asm-arm/plat-s3c24xx/irq.h
deleted file mode 100644
index 45746a99534..00000000000
--- a/include/asm-arm/plat-s3c24xx/irq.h
+++ /dev/null
@@ -1,109 +0,0 @@
-/* linux/include/asm-arm/plat-s3c24xx/irq.h
- *
- * Copyright (c) 2004-2005 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * Header file for S3C24XX CPU IRQ support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#define irqdbf(x...)
-#define irqdbf2(x...)
-
-#define EXTINT_OFF (IRQ_EINT4 - 4)
-
-/* these are exported for arch/arm/mach-* usage */
-extern struct irq_chip s3c_irq_level_chip;
-extern struct irq_chip s3c_irq_chip;
-
-static inline void
-s3c_irqsub_mask(unsigned int irqno, unsigned int parentbit,
-		int subcheck)
-{
-	unsigned long mask;
-	unsigned long submask;
-
-	submask = __raw_readl(S3C2410_INTSUBMSK);
-	mask = __raw_readl(S3C2410_INTMSK);
-
-	submask |= (1UL << (irqno - IRQ_S3CUART_RX0));
-
-	/* check to see if we need to mask the parent IRQ */
-
-	if ((submask  & subcheck) == subcheck) {
-		__raw_writel(mask | parentbit, S3C2410_INTMSK);
-	}
-
-	/* write back masks */
-	__raw_writel(submask, S3C2410_INTSUBMSK);
-
-}
-
-static inline void
-s3c_irqsub_unmask(unsigned int irqno, unsigned int parentbit)
-{
-	unsigned long mask;
-	unsigned long submask;
-
-	submask = __raw_readl(S3C2410_INTSUBMSK);
-	mask = __raw_readl(S3C2410_INTMSK);
-
-	submask &= ~(1UL << (irqno - IRQ_S3CUART_RX0));
-	mask &= ~parentbit;
-
-	/* write back masks */
-	__raw_writel(submask, S3C2410_INTSUBMSK);
-	__raw_writel(mask, S3C2410_INTMSK);
-}
-
-
-static inline void
-s3c_irqsub_maskack(unsigned int irqno, unsigned int parentmask, unsigned int group)
-{
-	unsigned int bit = 1UL << (irqno - IRQ_S3CUART_RX0);
-
-	s3c_irqsub_mask(irqno, parentmask, group);
-
-	__raw_writel(bit, S3C2410_SUBSRCPND);
-
-	/* only ack parent if we've got all the irqs (seems we must
-	 * ack, all and hope that the irq system retriggers ok when
-	 * the interrupt goes off again)
-	 */
-
-	if (1) {
-		__raw_writel(parentmask, S3C2410_SRCPND);
-		__raw_writel(parentmask, S3C2410_INTPND);
-	}
-}
-
-static inline void
-s3c_irqsub_ack(unsigned int irqno, unsigned int parentmask, unsigned int group)
-{
-	unsigned int bit = 1UL << (irqno - IRQ_S3CUART_RX0);
-
-	__raw_writel(bit, S3C2410_SUBSRCPND);
-
-	/* only ack parent if we've got all the irqs (seems we must
-	 * ack, all and hope that the irq system retriggers ok when
-	 * the interrupt goes off again)
-	 */
-
-	if (1) {
-		__raw_writel(parentmask, S3C2410_SRCPND);
-		__raw_writel(parentmask, S3C2410_INTPND);
-	}
-}
-
-/* exported for use in arch/arm/mach-s3c2410 */
-
-#ifdef CONFIG_PM
-extern int s3c_irq_wake(unsigned int irqno, unsigned int state);
-#else
-#define s3c_irq_wake NULL
-#endif
-
-extern int s3c_irqext_type(unsigned int irq, unsigned int type);
diff --git a/include/asm-arm/plat-s3c24xx/pm.h b/include/asm-arm/plat-s3c24xx/pm.h
deleted file mode 100644
index cc623667e48..00000000000
--- a/include/asm-arm/plat-s3c24xx/pm.h
+++ /dev/null
@@ -1,73 +0,0 @@
-/* linux/include/asm-arm/plat-s3c24xx/pm.h
- *
- * Copyright (c) 2004 Simtec Electronics
- *	Written by Ben Dooks, <ben@simtec.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/* s3c2410_pm_init
- *
- * called from board at initialisation time to setup the power
- * management
-*/
-
-#ifdef CONFIG_PM
-
-extern __init int s3c2410_pm_init(void);
-
-#else
-
-static inline int s3c2410_pm_init(void)
-{
-	return 0;
-}
-#endif
-
-/* configuration for the IRQ mask over sleep */
-extern unsigned long s3c_irqwake_intmask;
-extern unsigned long s3c_irqwake_eintmask;
-
-/* IRQ masks for IRQs allowed to go to sleep (see irq.c) */
-extern unsigned long s3c_irqwake_intallow;
-extern unsigned long s3c_irqwake_eintallow;
-
-/* per-cpu sleep functions */
-
-extern void (*pm_cpu_prep)(void);
-extern void (*pm_cpu_sleep)(void);
-
-/* Flags for PM Control */
-
-extern unsigned long s3c_pm_flags;
-
-/* from sleep.S */
-
-extern int  s3c2410_cpu_save(unsigned long *saveblk);
-extern void s3c2410_cpu_suspend(void);
-extern void s3c2410_cpu_resume(void);
-
-extern unsigned long s3c2410_sleep_save_phys;
-
-/* sleep save info */
-
-struct sleep_save {
-	void __iomem	*reg;
-	unsigned long	val;
-};
-
-#define SAVE_ITEM(x) \
-	{ .reg = (x) }
-
-extern void s3c2410_pm_do_save(struct sleep_save *ptr, int count);
-extern void s3c2410_pm_do_restore(struct sleep_save *ptr, int count);
-
-#ifdef CONFIG_PM
-extern int s3c24xx_irq_suspend(struct sys_device *dev, pm_message_t state);
-extern int s3c24xx_irq_resume(struct sys_device *dev);
-#else
-#define s3c24xx_irq_suspend NULL
-#define s3c24xx_irq_resume  NULL
-#endif
diff --git a/include/asm-arm/plat-s3c24xx/s3c2400.h b/include/asm-arm/plat-s3c24xx/s3c2400.h
deleted file mode 100644
index 3a5a16821af..00000000000
--- a/include/asm-arm/plat-s3c24xx/s3c2400.h
+++ /dev/null
@@ -1,31 +0,0 @@
-/* linux/include/asm-arm/plat-s3c24xx/s3c2400.h
- *
- * Copyright (c) 2004 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * Header file for S3C2400 cpu support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Modifications:
- *     09-Fev-2006 LCVR  First version, based on s3c2410.h
-*/
-
-#ifdef CONFIG_CPU_S3C2400
-
-extern  int s3c2400_init(void);
-
-extern void s3c2400_map_io(struct map_desc *mach_desc, int size);
-
-extern void s3c2400_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-
-extern void s3c2400_init_clocks(int xtal);
-
-#else
-#define s3c2400_init_clocks NULL
-#define s3c2400_init_uarts NULL
-#define s3c2400_map_io NULL
-#define s3c2400_init NULL
-#endif
diff --git a/include/asm-arm/plat-s3c24xx/s3c2410.h b/include/asm-arm/plat-s3c24xx/s3c2410.h
deleted file mode 100644
index 3cd1ec677b3..00000000000
--- a/include/asm-arm/plat-s3c24xx/s3c2410.h
+++ /dev/null
@@ -1,31 +0,0 @@
-/* linux/include/asm-arm/plat-s3c24xx/s3c2410.h
- *
- * Copyright (c) 2004 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * Header file for s3c2410 machine directory
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-#ifdef CONFIG_CPU_S3C2410
-
-extern  int s3c2410_init(void);
-
-extern void s3c2410_map_io(struct map_desc *mach_desc, int size);
-
-extern void s3c2410_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-
-extern void s3c2410_init_clocks(int xtal);
-
-#else
-#define s3c2410_init_clocks NULL
-#define s3c2410_init_uarts NULL
-#define s3c2410_map_io NULL
-#define s3c2410_init NULL
-#endif
-
-extern int s3c2410_baseclk_add(void);
diff --git a/include/asm-arm/plat-s3c24xx/s3c2412.h b/include/asm-arm/plat-s3c24xx/s3c2412.h
deleted file mode 100644
index 3ec97685e78..00000000000
--- a/include/asm-arm/plat-s3c24xx/s3c2412.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/* linux/include/asm-arm/plat-s3c24xx/s3c2412.h
- *
- * Copyright (c) 2006 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * Header file for s3c2412 cpu support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifdef CONFIG_CPU_S3C2412
-
-extern  int s3c2412_init(void);
-
-extern void s3c2412_map_io(struct map_desc *mach_desc, int size);
-
-extern void s3c2412_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-
-extern void s3c2412_init_clocks(int xtal);
-
-extern  int s3c2412_baseclk_add(void);
-#else
-#define s3c2412_init_clocks NULL
-#define s3c2412_init_uarts NULL
-#define s3c2412_map_io NULL
-#define s3c2412_init NULL
-#endif
diff --git a/include/asm-arm/plat-s3c24xx/s3c2440.h b/include/asm-arm/plat-s3c24xx/s3c2440.h
deleted file mode 100644
index 107853bf948..00000000000
--- a/include/asm-arm/plat-s3c24xx/s3c2440.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/* linux/include/asm-arm/plat-s3c24xx/s3c2440.h
- *
- * Copyright (c) 2004-2005 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * Header file for s3c2440 cpu support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifdef CONFIG_CPU_S3C2440
-extern  int s3c2440_init(void);
-#else
-#define s3c2440_init NULL
-#endif
diff --git a/include/asm-arm/plat-s3c24xx/s3c2442.h b/include/asm-arm/plat-s3c24xx/s3c2442.h
deleted file mode 100644
index 451a23a2092..00000000000
--- a/include/asm-arm/plat-s3c24xx/s3c2442.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/* linux/include/asm-arm/plat-s3c24xx/s3c2442.h
- *
- * Copyright (c) 2006 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * Header file for s3c2442 cpu support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifdef CONFIG_CPU_S3C2442
-extern  int s3c2442_init(void);
-#else
-#define s3c2442_init NULL
-#endif
diff --git a/include/asm-arm/plat-s3c24xx/s3c2443.h b/include/asm-arm/plat-s3c24xx/s3c2443.h
deleted file mode 100644
index 11d83b5c84e..00000000000
--- a/include/asm-arm/plat-s3c24xx/s3c2443.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/* linux/include/asm-arm/plat-s3c24xx/s3c2443.h
- *
- * Copyright (c) 2004-2005 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * Header file for s3c2443 cpu support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifdef CONFIG_CPU_S3C2443
-
-struct s3c2410_uartcfg;
-
-extern  int s3c2443_init(void);
-
-extern void s3c2443_map_io(struct map_desc *mach_desc, int size);
-
-extern void s3c2443_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-
-extern void s3c2443_init_clocks(int xtal);
-
-extern  int s3c2443_baseclk_add(void);
-
-#else
-#define s3c2443_init_clocks NULL
-#define s3c2443_init_uarts NULL
-#define s3c2443_map_io NULL
-#define s3c2443_init NULL
-#endif