diff options
Diffstat (limited to 'include/asm-blackfin/mach-bf533/bf533.h')
| -rw-r--r-- | include/asm-blackfin/mach-bf533/bf533.h | 306 |
1 files changed, 306 insertions, 0 deletions
diff --git a/include/asm-blackfin/mach-bf533/bf533.h b/include/asm-blackfin/mach-bf533/bf533.h new file mode 100644 index 00000000000..185fc128485 --- /dev/null +++ b/include/asm-blackfin/mach-bf533/bf533.h @@ -0,0 +1,306 @@ +/* + * File: include/asm-blackfin/mach-bf533/bf533.h + * Based on: + * Author: + * + * Created: + * Description: SYSTEM MMR REGISTER AND MEMORY MAP FOR ADSP-BF561 + * + * Modified: + * Copyright 2004-2006 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef __MACH_BF533_H__ +#define __MACH_BF533_H__ + +#define SUPPORTED_REVID 2 + +#define OFFSET_(x) ((x) & 0x0000FFFF) + +/*some misc defines*/ +#define IMASK_IVG15 0x8000 +#define IMASK_IVG14 0x4000 +#define IMASK_IVG13 0x2000 +#define IMASK_IVG12 0x1000 + +#define IMASK_IVG11 0x0800 +#define IMASK_IVG10 0x0400 +#define IMASK_IVG9 0x0200 +#define IMASK_IVG8 0x0100 + +#define IMASK_IVG7 0x0080 +#define IMASK_IVGTMR 0x0040 +#define IMASK_IVGHW 0x0020 + +/***************************/ + + +#define BLKFIN_DSUBBANKS 4 +#define BLKFIN_DWAYS 2 +#define BLKFIN_DLINES 64 +#define BLKFIN_ISUBBANKS 4 +#define BLKFIN_IWAYS 4 +#define BLKFIN_ILINES 32 + +#define WAY0_L 0x1 +#define WAY1_L 0x2 +#define WAY01_L 0x3 +#define WAY2_L 0x4 +#define WAY02_L 0x5 +#define WAY12_L 0x6 +#define WAY012_L 0x7 + +#define WAY3_L 0x8 +#define WAY03_L 0x9 +#define WAY13_L 0xA +#define WAY013_L 0xB + +#define WAY32_L 0xC +#define WAY320_L 0xD +#define WAY321_L 0xE +#define WAYALL_L 0xF + +#define DMC_ENABLE (2<<2) /*yes, 2, not 1 */ + +/* IAR0 BIT FIELDS*/ +#define RTC_ERROR_BIT 0x0FFFFFFF +#define UART_ERROR_BIT 0xF0FFFFFF +#define SPORT1_ERROR_BIT 0xFF0FFFFF +#define SPI_ERROR_BIT 0xFFF0FFFF +#define SPORT0_ERROR_BIT 0xFFFF0FFF +#define PPI_ERROR_BIT 0xFFFFF0FF +#define DMA_ERROR_BIT 0xFFFFFF0F +#define PLLWAKE_ERROR_BIT 0xFFFFFFFF + +/* IAR1 BIT FIELDS*/ +#define DMA7_UARTTX_BIT 0x0FFFFFFF +#define DMA6_UARTRX_BIT 0xF0FFFFFF +#define DMA5_SPI_BIT 0xFF0FFFFF +#define DMA4_SPORT1TX_BIT 0xFFF0FFFF +#define DMA3_SPORT1RX_BIT 0xFFFF0FFF +#define DMA2_SPORT0TX_BIT 0xFFFFF0FF +#define DMA1_SPORT0RX_BIT 0xFFFFFF0F +#define DMA0_PPI_BIT 0xFFFFFFFF + +/* IAR2 BIT FIELDS*/ +#define WDTIMER_BIT 0x0FFFFFFF +#define MEMDMA1_BIT 0xF0FFFFFF +#define MEMDMA0_BIT 0xFF0FFFFF +#define PFB_BIT 0xFFF0FFFF +#define PFA_BIT 0xFFFF0FFF +#define TIMER2_BIT 0xFFFFF0FF +#define TIMER1_BIT 0xFFFFFF0F +#define TIMER0_BIT 0xFFFFFFFF + +/********************************* EBIU Settings ************************************/ +#define AMBCTL0VAL ((CONFIG_BANK_1 << 16) | CONFIG_BANK_0) +#define AMBCTL1VAL ((CONFIG_BANK_3 << 16) | CONFIG_BANK_2) + +#ifdef CONFIG_C_AMBEN_ALL +#define V_AMBEN AMBEN_ALL +#endif +#ifdef CONFIG_C_AMBEN +#define V_AMBEN 0x0 +#endif +#ifdef CONFIG_C_AMBEN_B0 +#define V_AMBEN AMBEN_B0 +#endif +#ifdef CONFIG_C_AMBEN_B0_B1 +#define V_AMBEN AMBEN_B0_B1 +#endif +#ifdef CONFIG_C_AMBEN_B0_B1_B2 +#define V_AMBEN AMBEN_B0_B1_B2 +#endif +#ifdef CONFIG_C_AMCKEN +#define V_AMCKEN AMCKEN +#else +#define V_AMCKEN 0x0 +#endif +#ifdef CONFIG_C_CDPRIO +#define V_CDPRIO 0x100 +#else +#define V_CDPRIO 0x0 +#endif + +#define AMGCTLVAL (V_AMBEN | V_AMCKEN | V_CDPRIO) + +#define MAX_VC 650000000 +#define MIN_VC 50000000 + +#ifdef CONFIG_BFIN_KERNEL_CLOCK +/********************************PLL Settings **************************************/ +#if (CONFIG_VCO_MULT < 0) +#error "VCO Multiplier is less than 0. Please select a different value" +#endif + +#if (CONFIG_VCO_MULT == 0) +#error "VCO Multiplier should be greater than 0. Please select a different value" +#endif + +#if (CONFIG_VCO_MULT > 64) +#error "VCO Multiplier is more than 64. Please select a different value" +#endif + +#ifndef CONFIG_CLKIN_HALF +#define CONFIG_VCO_HZ (CONFIG_CLKIN_HZ * CONFIG_VCO_MULT) +#else +#define CONFIG_VCO_HZ ((CONFIG_CLKIN_HZ * CONFIG_VCO_MULT)/2) +#endif + +#ifndef CONFIG_PLL_BYPASS +#define CONFIG_CCLK_HZ (CONFIG_VCO_HZ/CONFIG_CCLK_DIV) +#define CONFIG_SCLK_HZ (CONFIG_VCO_HZ/CONFIG_SCLK_DIV) +#else +#define CONFIG_CCLK_HZ CONFIG_CLKIN_HZ +#define CONFIG_SCLK_HZ CONFIG_CLKIN_HZ +#endif + +#if (CONFIG_SCLK_DIV < 1) +#error "SCLK DIV cannot be less than 1 or more than 15. Please select a proper value" +#endif + +#if (CONFIG_SCLK_DIV > 15) +#error "SCLK DIV cannot be less than 1 or more than 15. Please select a proper value" +#endif + +#if (CONFIG_CCLK_DIV != 1) +#if (CONFIG_CCLK_DIV != 2) +#if (CONFIG_CCLK_DIV != 4) +#if (CONFIG_CCLK_DIV != 8) +#error "CCLK DIV can be 1,2,4 or 8 only. Please select a proper value" +#endif +#endif +#endif +#endif + +#if (CONFIG_VCO_HZ > MAX_VC) +#error "VCO selected is more than maximum value. Please change the VCO multipler" +#endif + +#if (CONFIG_SCLK_HZ > 133000000) +#error "Sclk value selected is more than maximum. Please select a proper value for SCLK multiplier" +#endif + +#if (CONFIG_SCLK_HZ < 27000000) +#error "Sclk value selected is less than minimum. Please select a proper value for SCLK multiplier" +#endif + +#if (CONFIG_SCLK_HZ > CONFIG_CCLK_HZ) +#if (CONFIG_SCLK_HZ != CONFIG_CLKIN_HZ) +#if (CONFIG_CCLK_HZ != CONFIG_CLKIN_HZ) +#error "Please select sclk less than cclk" +#endif +#endif +#endif + +#if (CONFIG_CCLK_DIV == 1) +#define CONFIG_CCLK_ACT_DIV CCLK_DIV1 +#endif +#if (CONFIG_CCLK_DIV == 2) +#define CONFIG_CCLK_ACT_DIV CCLK_DIV2 +#endif +#if (CONFIG_CCLK_DIV == 4) +#define CONFIG_CCLK_ACT_DIV CCLK_DIV4 +#endif +#if (CONFIG_CCLK_DIV == 8) +#define CONFIG_CCLK_ACT_DIV CCLK_DIV8 +#endif +#ifndef CONFIG_CCLK_ACT_DIV +#define CONFIG_CCLK_ACT_DIV CONFIG_CCLK_DIV_not_defined_properly +#endif + +#if defined(ANOMALY_05000273) && (CONFIG_CCLK_DIV == 1) +#error ANOMALY 05000273, please make sure CCLK is at least 2x SCLK +#endif + +#endif /* CONFIG_BFIN_KERNEL_CLOCK */ + +#ifdef CONFIG_BF533 +#define CPU "BF533" +#define CPUID 0x027a5000 +#endif +#ifdef CONFIG_BF532 +#define CPU "BF532" +#define CPUID 0x0275A000 +#endif +#ifdef CONFIG_BF531 +#define CPU "BF531" +#define CPUID 0x027a5000 +#endif +#ifndef CPU +#define CPU "UNKNOWN" +#define CPUID 0x0 +#endif + +#if (CONFIG_MEM_SIZE % 4) +#error "SDRAM mem size must be multible of 4MB" +#endif + +#define SDRAM_IGENERIC (CPLB_L1_CHBL | CPLB_USER_RD | CPLB_VALID | CPLB_PORTPRIO) +#define SDRAM_IKERNEL (SDRAM_IGENERIC | CPLB_LOCK) +#define L1_IMEMORY ( CPLB_USER_RD | CPLB_VALID | CPLB_LOCK) +#define SDRAM_INON_CHBL ( CPLB_USER_RD | CPLB_VALID) + +/*Use the menuconfig cache policy here - CONFIG_BLKFIN_WT/CONFIG_BLKFIN_WB*/ + +#define ANOMALY_05000158_WORKAROUND 0x200 +#ifdef CONFIG_BLKFIN_WB /*Write Back Policy */ +#define SDRAM_DGENERIC (CPLB_L1_CHBL | CPLB_DIRTY \ + | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158_WORKAROUND) +#else /*Write Through */ +#define SDRAM_DGENERIC (CPLB_L1_CHBL | CPLB_WT | CPLB_L1_AOW | CPLB_DIRTY \ + | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158_WORKAROUND) +#endif + +#define L1_DMEMORY (CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158_WORKAROUND | CPLB_LOCK | CPLB_DIRTY) +#define SDRAM_DNON_CHBL (CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158_WORKAROUND | CPLB_DIRTY) +#define SDRAM_EBIU (CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158_WORKAROUND | CPLB_DIRTY) +#define SDRAM_OOPS (CPLB_VALID | ANOMALY_05000158_WORKAROUND | CPLB_LOCK | CPLB_DIRTY) + +#define SIZE_1K 0x00000400 /* 1K */ +#define SIZE_4K 0x00001000 /* 4K */ +#define SIZE_1M 0x00100000 /* 1M */ +#define SIZE_4M 0x00400000 /* 4M */ + +#define MAX_CPLBS (16 * 2) + +/* +* Number of required data CPLB switchtable entries +* MEMSIZE / 4 (we mostly install 4M page size CPLBs +* approx 16 for smaller 1MB page size CPLBs for allignment purposes +* 1 for L1 Data Memory +* 1 for CONFIG_DEBUG_HUNT_FOR_ZERO +* 1 for ASYNC Memory +*/ + + +#define MAX_SWITCH_D_CPLBS (((CONFIG_MEM_SIZE / 4) + 16 + 1 + 1 + 1) * 2) + +/* +* Number of required instruction CPLB switchtable entries +* MEMSIZE / 4 (we mostly install 4M page size CPLBs +* approx 12 for smaller 1MB page size CPLBs for allignment purposes +* 1 for L1 Instruction Memory +* 1 for CONFIG_DEBUG_HUNT_FOR_ZERO +*/ + +#define MAX_SWITCH_I_CPLBS (((CONFIG_MEM_SIZE / 4) + 12 + 1 + 1) * 2) + +#endif /* __MACH_BF533_H__ */ |