diff options
Diffstat (limited to 'include/asm-blackfin/mach-bf533/defBF532.h')
| -rw-r--r-- | include/asm-blackfin/mach-bf533/defBF532.h | 207 |
1 files changed, 145 insertions, 62 deletions
diff --git a/include/asm-blackfin/mach-bf533/defBF532.h b/include/asm-blackfin/mach-bf533/defBF532.h index b240a082aa0..6a3cf93f8b5 100644 --- a/include/asm-blackfin/mach-bf533/defBF532.h +++ b/include/asm-blackfin/mach-bf533/defBF532.h @@ -46,11 +46,7 @@ #ifndef _DEF_BF532_H #define _DEF_BF532_H -/* -#if !defined(__ADSPLPBLACKFIN__) -#warning defBF532.h should only be included for 532 compatible chips -#endif -*/ + /* include all Core registers and bit definitions */ #include <asm/mach-common/def_LPBlackfin.h> @@ -65,10 +61,10 @@ #define PLL_STAT 0xFFC0000C /* PLL Status register (16-bit) */ #define PLL_LOCKCNT 0xFFC00010 /* PLL Lock Count register (16-bit) */ #define CHIPID 0xFFC00014 /* Chip ID Register */ -#define SWRST 0xFFC00100 /* Software Reset Register (16-bit) */ -#define SYSCR 0xFFC00104 /* System Configuration registe */ /* System Interrupt Controller (0xFFC00100 - 0xFFC001FF) */ +#define SWRST 0xFFC00100 /* Software Reset Register (16-bit) */ +#define SYSCR 0xFFC00104 /* System Configuration registe */ #define SIC_RVECT 0xFFC00108 /* Interrupt Reset Vector Address Register */ #define SIC_IMASK 0xFFC0010C /* Interrupt Mask Register */ #define SIC_IAR0 0xFFC00110 /* Interrupt Assignment Register 0 */ @@ -218,11 +214,13 @@ #define EBIU_SDSTAT 0xFFC00A1C /* SDRAM Status Register */ /* DMA Traffic controls */ -#define DMA_TCPER 0xFFC00B0C /* Traffic Control Periods Register */ -#define DMA_TCCNT 0xFFC00B10 /* Traffic Control Current Counts Register */ #define DMA_TC_PER 0xFFC00B0C /* Traffic Control Periods Register */ #define DMA_TC_CNT 0xFFC00B10 /* Traffic Control Current Counts Register */ +/* Alternate deprecated register names (below) provided for backwards code compatibility */ +#define DMA_TCPER 0xFFC00B0C /* Traffic Control Periods Register */ +#define DMA_TCCNT 0xFFC00B10 /* Traffic Control Current Counts Register */ + /* DMA Controller (0xFFC00C00 - 0xFFC00FFF) */ #define DMA0_CONFIG 0xFFC00C08 /* DMA Channel 0 Configuration Register */ #define DMA0_NEXT_DESC_PTR 0xFFC00C00 /* DMA Channel 0 Next Descriptor Pointer Register */ @@ -407,14 +405,25 @@ /* ********************* PLL AND RESET MASKS ************************ */ /* PLL_CTL Masks */ -#define PLL_CLKIN 0x00000000 /* Pass CLKIN to PLL */ -#define PLL_CLKIN_DIV2 0x00000001 /* Pass CLKIN/2 to PLL */ -#define PLL_OFF 0x00000002 /* Shut off PLL clocks */ -#define STOPCK_OFF 0x00000008 /* Core clock off */ -#define PDWN 0x00000020 /* Put the PLL in a Deep Sleep state */ -#define BYPASS 0x00000100 /* Bypass the PLL */ +#define PLL_CLKIN 0x0000 /* Pass CLKIN to PLL */ +#define PLL_CLKIN_DIV2 0x0001 /* Pass CLKIN/2 to PLL */ +#define DF 0x0001 /* 0: PLL = CLKIN, 1: PLL = CLKIN/2 */ +#define PLL_OFF 0x0002 /* Shut off PLL clocks */ +#define STOPCK_OFF 0x0008 /* Core clock off */ +#define STOPCK 0x0008 /* Core Clock Off */ +#define PDWN 0x0020 /* Put the PLL in a Deep Sleep state */ +#if !defined(__ADSPBF538__) +/* this file is included in defBF538.h but IN_DELAY/OUT_DELAY are different */ +# define IN_DELAY 0x0040 /* Add 200ps Delay To EBIU Input Latches */ +# define OUT_DELAY 0x0080 /* Add 200ps Delay To EBIU Output Signals */ +#endif +#define BYPASS 0x0100 /* Bypass the PLL */ +/* PLL_CTL Macros (Only Use With Logic OR While Setting Lower Order Bits) */ +#define SET_MSEL(x) (((x)&0x3F) << 0x9) /* Set MSEL = 0-63 --> VCO = CLKIN*MSEL */ /* PLL_DIV Masks */ +#define SSEL 0x000F /* System Select */ +#define CSEL 0x0030 /* Core Select */ #define SCLK_DIV(x) (x) /* SCLK = VCO / x */ @@ -422,6 +431,8 @@ #define CCLK_DIV2 0x00000010 /* CCLK = VCO / 2 */ #define CCLK_DIV4 0x00000020 /* CCLK = VCO / 4 */ #define CCLK_DIV8 0x00000030 /* CCLK = VCO / 8 */ +/* PLL_DIV Macros */ +#define SET_SSEL(x) ((x)&0xF) /* Set SSEL = 0-15 --> SCLK = VCO/SSEL */ /* PLL_STAT Masks */ #define ACTIVE_PLLENABLED 0x0001 /* Processor In Active Mode With PLL Enabled */ @@ -429,13 +440,47 @@ #define ACTIVE_PLLDISABLED 0x0004 /* Processor In Active Mode With PLL Disabled */ #define PLL_LOCKED 0x0020 /* PLL_LOCKCNT Has Been Reached */ +/* VR_CTL Masks */ +#define FREQ 0x0003 /* Switching Oscillator Frequency For Regulator */ +#define HIBERNATE 0x0000 /* Powerdown/Bypass On-Board Regulation */ +#define FREQ_333 0x0001 /* Switching Frequency Is 333 kHz */ +#define FREQ_667 0x0002 /* Switching Frequency Is 667 kHz */ +#define FREQ_1000 0x0003 /* Switching Frequency Is 1 MHz */ + +#define GAIN 0x000C /* Voltage Level Gain */ +#define GAIN_5 0x0000 /* GAIN = 5 */ +#define GAIN_10 0x0004 /* GAIN = 10 */ +#define GAIN_20 0x0008 /* GAIN = 20 */ +#define GAIN_50 0x000C /* GAIN = 50 */ + +#define VLEV 0x00F0 /* Internal Voltage Level */ +#define VLEV_085 0x0060 /* VLEV = 0.85 V (-5% - +10% Accuracy) */ +#define VLEV_090 0x0070 /* VLEV = 0.90 V (-5% - +10% Accuracy) */ +#define VLEV_095 0x0080 /* VLEV = 0.95 V (-5% - +10% Accuracy) */ +#define VLEV_100 0x0090 /* VLEV = 1.00 V (-5% - +10% Accuracy) */ +#define VLEV_105 0x00A0 /* VLEV = 1.05 V (-5% - +10% Accuracy) */ +#define VLEV_110 0x00B0 /* VLEV = 1.10 V (-5% - +10% Accuracy) */ +#define VLEV_115 0x00C0 /* VLEV = 1.15 V (-5% - +10% Accuracy) */ +#define VLEV_120 0x00D0 /* VLEV = 1.20 V (-5% - +10% Accuracy) */ + +#define WAKE 0x0100 /* Enable RTC/Reset Wakeup From Hibernate */ +#define SCKELOW 0x8000 /* Do Not Drive SCKE High During Reset After Hibernate */ + /* CHIPID Masks */ #define CHIPID_VERSION 0xF0000000 #define CHIPID_FAMILY 0x0FFFF000 #define CHIPID_MANUFACTURE 0x00000FFE /* SWRST Mask */ -#define SYSTEM_RESET 0x00000007 /* Initiates a system software reset */ +#define SYSTEM_RESET 0x0007 /* Initiates A System Software Reset */ +#define DOUBLE_FAULT 0x0008 /* Core Double Fault Causes Reset */ +#define RESET_DOUBLE 0x2000 /* SW Reset Generated By Core Double-Fault */ +#define RESET_WDOG 0x4000 /* SW Reset Generated By Watchdog Timer */ +#define RESET_SOFTWARE 0x8000 /* SW Reset Occurred Since Last Read Of SWRST */ + +/* SYSCR Masks */ +#define BMODE 0x0006 /* Boot Mode - Latched During HW Reset From Mode Pins */ +#define NOBOOT 0x0010 /* Execute From L1 or ASYNC Bank 0 When BMODE = 0 */ /* ************* SYSTEM INTERRUPT CONTROLLER MASKS ***************** */ @@ -483,23 +528,6 @@ #define IWR_ENABLE(x) (1 << (x)) /* Wakeup Enable Peripheral #x */ #define IWR_DISABLE(x) (0xFFFFFFFF ^ (1 << (x))) /* Wakeup Disable Peripheral #x */ -/* ********* WATCHDOG TIMER MASKS ********************8 */ - -/* Watchdog Timer WDOG_CTL Register */ -#define ICTL(x) ((x<<1) & 0x0006) -#define ENABLE_RESET 0x00000000 /* Set Watchdog Timer to generate reset */ -#define ENABLE_NMI 0x00000002 /* Set Watchdog Timer to generate non-maskable interrupt */ -#define ENABLE_GPI 0x00000004 /* Set Watchdog Timer to generate general-purpose interrupt */ -#define DISABLE_EVT 0x00000006 /* Disable Watchdog Timer interrupts */ - -#define TMR_EN 0x0000 -#define TMR_DIS 0x0AD0 -#define TRO 0x8000 - -#define ICTL_P0 0x01 -#define ICTL_P1 0x02 -#define TRO_P 0x0F - /* ***************************** UART CONTROLLER MASKS ********************** */ /* UART_LCR Register */ @@ -583,6 +611,9 @@ #define TSPEN 0x0001 /* TX enable */ #define ITCLK 0x0002 /* Internal TX Clock Select */ #define TDTYPE 0x000C /* TX Data Formatting Select */ +#define DTYPE_NORM 0x0000 /* Data Format Normal */ +#define DTYPE_ULAW 0x0008 /* Compand Using u-Law */ +#define DTYPE_ALAW 0x000C /* Compand Using A-Law */ #define TLSBIT 0x0010 /* TX Bit Order */ #define ITFS 0x0200 /* Internal TX Frame Sync Select */ #define TFSR 0x0400 /* TX Frame Sync Required Select */ @@ -592,7 +623,12 @@ #define TCKFE 0x4000 /* TX Clock Falling Edge Select */ /* SPORTx_TCR2 Masks */ -#define SLEN 0x001F /*TX Word Length */ +#if defined(__ADSPBF531__) || defined(__ADSPBF532__) || \ + defined(__ADSPBF533__) +# define SLEN 0x001F /*TX Word Length */ +#else +# define SLEN(x) ((x)&0x1F) /* SPORT TX Word Length (2 - 31) */ +#endif #define TXSE 0x0100 /*TX Secondary Enable */ #define TSFSE 0x0200 /*TX Stereo Frame Sync Enable */ #define TRFST 0x0400 /*TX Right-First Data Order */ @@ -601,8 +637,9 @@ #define RSPEN 0x0001 /* RX enable */ #define IRCLK 0x0002 /* Internal RX Clock Select */ #define RDTYPE 0x000C /* RX Data Formatting Select */ -#define RULAW 0x0008 /* u-Law enable */ -#define RALAW 0x000C /* A-Law enable */ +#define DTYPE_NORM 0x0000 /* no companding */ +#define DTYPE_ULAW 0x0008 /* Compand Using u-Law */ +#define DTYPE_ALAW 0x000C /* Compand Using A-Law */ #define RLSBIT 0x0010 /* RX Bit Order */ #define IRFS 0x0200 /* Internal RX Frame Sync Select */ #define RFSR 0x0400 /* RX Frame Sync Required Select */ @@ -611,7 +648,7 @@ #define RCKFE 0x4000 /* RX Clock Falling Edge Select */ /* SPORTx_RCR2 Masks */ -#define SLEN 0x001F /*RX Word Length */ +/* SLEN defined above */ #define RXSE 0x0100 /*RX Secondary Enable */ #define RSFSE 0x0200 /*RX Stereo Frame Sync Enable */ #define RRFST 0x0400 /*Right-First Data Order */ @@ -628,14 +665,37 @@ /*SPORTx_MCMC1 Masks */ #define SP_WSIZE 0x0000F000 /*Multichannel Window Size Field */ #define SP_WOFF 0x000003FF /*Multichannel Window Offset Field */ +/* SPORTx_MCMC1 Macros */ +#define SET_SP_WOFF(x) ((x) & 0x3FF) /* Multichannel Window Offset Field */ +/* Only use SET_WSIZE Macro With Logic OR While Setting Lower Order Bits */ +#define SET_SP_WSIZE(x) (((((x)>>0x3)-1)&0xF) << 0xC) /* Multichannel Window Size = (x/8)-1 */ /*SPORTx_MCMC2 Masks */ -#define MCCRM 0x00000003 /*Multichannel Clock Recovery Mode */ -#define MCDTXPE 0x00000004 /*Multichannel DMA Transmit Packing */ -#define MCDRXPE 0x00000008 /*Multichannel DMA Receive Packing */ -#define MCMEN 0x00000010 /*Multichannel Frame Mode Enable */ -#define FSDR 0x00000080 /*Multichannel Frame Sync to Data Relationship */ -#define MFD 0x0000F000 /*Multichannel Frame Delay */ +#define MCCRM 0x00000003 /*Multichannel Clock Recovery Mode */ +#define REC_BYPASS 0x0000 /* Bypass Mode (No Clock Recovery) */ +#define REC_2FROM4 0x0002 /* Recover 2 MHz Clock from 4 MHz Clock */ +#define REC_8FROM16 0x0003 /* Recover 8 MHz Clock from 16 MHz Clock */ +#define MCDTXPE 0x00000004 /*Multichannel DMA Transmit Packing */ +#define MCDRXPE 0x00000008 /*Multichannel DMA Receive Packing */ +#define MCMEN 0x00000010 /*Multichannel Frame Mode Enable */ +#define FSDR 0x00000080 /*Multichannel Frame Sync to Data Relationship */ +#define MFD 0x0000F000 /*Multichannel Frame Delay */ +#define MFD_0 0x0000 /* Multichannel Frame Delay = 0 */ +#define MFD_1 0x1000 /* Multichannel Frame Delay = 1 */ +#define MFD_2 0x2000 /* Multichannel Frame Delay = 2 */ +#define MFD_3 0x3000 /* Multichannel Frame Delay = 3 */ +#define MFD_4 0x4000 /* Multichannel Frame Delay = 4 */ +#define MFD_5 0x5000 /* Multichannel Frame Delay = 5 */ +#define MFD_6 0x6000 /* Multichannel Frame Delay = 6 */ +#define MFD_7 0x7000 /* Multichannel Frame Delay = 7 */ +#define MFD_8 0x8000 /* Multichannel Frame Delay = 8 */ +#define MFD_9 0x9000 /* Multichannel Frame Delay = 9 */ +#define MFD_10 0xA000 /* Multichannel Frame Delay = 10 */ +#define MFD_11 0xB000 /* Multichannel Frame Delay = 11 */ +#define MFD_12 0xC000 /* Multichannel Frame Delay = 12 */ +#define MFD_13 0xD000 /* Multichannel Frame Delay = 13 */ +#define MFD_14 0xE000 /* Multichannel Frame Delay = 14 */ +#define MFD_15 0xF000 /* Multichannel Frame Delay = 15 */ /* ********* PARALLEL PERIPHERAL INTERFACE (PPI) MASKS **************** */ @@ -660,6 +720,8 @@ #define DLEN_16 0x3800 /* Data Length = 16 Bits */ #define DLEN(x) (((x-9) & 0x07) << 11) /* PPI Data Length (only works for x=10-->x=16) */ #define POL 0x0000C000 /* PPI Signal Polarities */ +#define POLC 0x4000 /* PPI Clock Polarity */ +#define POLS 0x8000 /* PPI Frame Sync Polarity */ /* PPI_STATUS Masks */ #define FLD 0x00000400 /* Field Indicator */ @@ -729,6 +791,15 @@ #define PCAPRD 0x00000800 /* DMA Read Operation Indicator */ #define PMAP 0x00007000 /* DMA Peripheral Map Field */ +#define PMAP_PPI 0x0000 /* PMAP PPI Port DMA */ +#define PMAP_SPORT0RX 0x1000 /* PMAP SPORT0 Receive DMA */ +#define PMAP_SPORT0TX 0x2000 /* PMAP SPORT0 Transmit DMA */ +#define PMAP_SPORT1RX 0x3000 /* PMAP SPORT1 Receive DMA */ +#define PMAP_SPORT1TX 0x4000 /* PMAP SPORT1 Transmit DMA */ +#define PMAP_SPI 0x5000 /* PMAP SPI DMA */ +#define PMAP_UARTRX 0x6000 /* PMAP UART Receive DMA */ +#define PMAP_UARTTX 0x7000 /* PMAP UART Transmit DMA */ + /* ************* GENERAL PURPOSE TIMER MASKS ******************** */ /* PWM Timer bit definitions */ @@ -755,9 +826,9 @@ #define TIMIL0 0x0001 #define TIMIL1 0x0002 #define TIMIL2 0x0004 -#define TOVL_ERR0 0x0010 -#define TOVL_ERR1 0x0020 -#define TOVL_ERR2 0x0040 +#define TOVF_ERR0 0x0010 /* Timer 0 Counter Overflow */ +#define TOVF_ERR1 0x0020 /* Timer 1 Counter Overflow */ +#define TOVF_ERR2 0x0040 /* Timer 2 Counter Overflow */ #define TRUN0 0x1000 #define TRUN1 0x2000 #define TRUN2 0x4000 @@ -765,13 +836,21 @@ #define TIMIL0_P 0x00 #define TIMIL1_P 0x01 #define TIMIL2_P 0x02 -#define TOVL_ERR0_P 0x04 -#define TOVL_ERR1_P 0x05 -#define TOVL_ERR2_P 0x06 +#define TOVF_ERR0_P 0x04 +#define TOVF_ERR1_P 0x05 +#define TOVF_ERR2_P 0x06 #define TRUN0_P 0x0C #define TRUN1_P 0x0D #define TRUN2_P 0x0E +/* Alternate Deprecated Macros Provided For Backwards Code Compatibility */ +#define TOVL_ERR0 TOVF_ERR0 +#define TOVL_ERR1 TOVF_ERR1 +#define TOVL_ERR2 TOVF_ERR2 +#define TOVL_ERR0_P TOVF_ERR0_P +#define TOVL_ERR1_P TOVF_ERR1_P +#define TOVL_ERR2_P TOVF_ERR2_P + /* TIMERx_CONFIG Registers */ #define PWM_OUT 0x0001 #define WDTH_CAP 0x0002 @@ -841,6 +920,10 @@ /* SPI_CTL Masks */ #define TIMOD 0x00000003 /* Transfer initiation mode and interrupt generation */ +#define RDBR_CORE 0x0000 /* RDBR Read Initiates, IRQ When RDBR Full */ +#define TDBR_CORE 0x0001 /* TDBR Write Initiates, IRQ When TDBR Empty */ +#define RDBR_DMA 0x0002 /* DMA Read, DMA Until FIFO Empty */ +#define TDBR_DMA 0x0003 /* DMA Write, DMA Until FIFO Full */ #define SZ 0x00000004 /* Send Zero (=0) or last (=1) word when TDBR empty. */ #define GM 0x00000008 /* When RDBR full, get more (=1) data or discard (=0) incoming Data */ #define PSSE 0x00000010 /* Enable (=1) Slave-Select input for Master. */ @@ -894,10 +977,20 @@ #define RXS 0x00000020 /* SPI_RDBR Data Buffer Status (0=Empty, 1=Full) */ #define TXCOL 0x00000040 /* When set (=1), corrupt data may have been transmitted */ +/* SPIx_FLG Masks */ +#define FLG1E 0xFDFF /* Activates SPI_FLOUT1 */ +#define FLG2E 0xFBFF /* Activates SPI_FLOUT2 */ +#define FLG3E 0xF7FF /* Activates SPI_FLOUT3 */ +#define FLG4E 0xEFFF /* Activates SPI_FLOUT4 */ +#define FLG5E 0xDFFF /* Activates SPI_FLOUT5 */ +#define FLG6E 0xBFFF /* Activates SPI_FLOUT6 */ +#define FLG7E 0x7FFF /* Activates SPI_FLOUT7 */ + /* ********************* ASYNCHRONOUS MEMORY CONTROLLER MASKS ************* */ /* AMGCTL Masks */ #define AMCKEN 0x00000001 /* Enable CLKOUT */ +#define AMBEN_NONE 0x00000000 /* All Banks Disabled */ #define AMBEN_B0 0x00000002 /* Enable Asynchronous Memory Bank 0 only */ #define AMBEN_B0_B1 0x00000004 /* Enable Asynchronous Memory Banks 0 & 1 only */ #define AMBEN_B0_B1_B2 0x00000006 /* Enable Asynchronous Memory Banks 0, 1, and 2 */ @@ -1097,6 +1190,9 @@ #define CL_3 0x0000000C /* SDRAM CAS latency = 3 cycles */ #define PFE 0x00000010 /* Enable SDRAM prefetch */ #define PFP 0x00000020 /* Prefetch has priority over AMC requests */ +#define PASR_ALL 0x00000000 /* All 4 SDRAM Banks Refreshed In Self-Refresh */ +#define PASR_B0_B1 0x00000010 /* SDRAM Banks 0 and 1 Are Refreshed In Self-Refresh */ +#define PASR_B0 0x00000020 /* Only SDRAM Bank 0 Is Refreshed In Self-Refresh */ #define TRAS_1 0x00000040 /* SDRAM tRAS = 1 cycle */ #define TRAS_2 0x00000080 /* SDRAM tRAS = 2 cycles */ #define TRAS_3 0x000000C0 /* SDRAM tRAS = 3 cycles */ @@ -1158,18 +1254,5 @@ #define SDEASE 0x00000010 /* SDRAM EAB sticky error status - W1C */ #define BGSTAT 0x00000020 /* Bus granted */ -/*VR_CTL Masks*/ -#define WAKE 0x100 -#define VLEV_6 0x60 -#define VLEV_7 0x70 -#define VLEV_8 0x80 -#define VLEV_9 0x90 -#define VLEV_10 0xA0 -#define VLEV_11 0xB0 -#define VLEV_12 0xC0 -#define VLEV_13 0xD0 -#define VLEV_14 0xE0 -#define VLEV_15 0xF0 -#define FREQ_3 0x03 #endif /* _DEF_BF532_H */ |