diff options
Diffstat (limited to 'include/asm-blackfin/mach-bf533/defBF532.h')
| -rw-r--r-- | include/asm-blackfin/mach-bf533/defBF532.h | 31 |
1 files changed, 19 insertions, 12 deletions
diff --git a/include/asm-blackfin/mach-bf533/defBF532.h b/include/asm-blackfin/mach-bf533/defBF532.h index 37134aaf995..0ab4dd7494c 100644 --- a/include/asm-blackfin/mach-bf533/defBF532.h +++ b/include/asm-blackfin/mach-bf533/defBF532.h @@ -88,20 +88,25 @@ #define RTC_PREN 0xFFC00314 /* RTC Prescaler Enable Register (alternate macro) */ /* UART Controller (0xFFC00400 - 0xFFC004FF) */ -#define UART_THR 0xFFC00400 /* Transmit Holding register */ -#define UART_RBR 0xFFC00400 /* Receive Buffer register */ -#define UART_DLL 0xFFC00400 /* Divisor Latch (Low-Byte) */ -#define UART_IER 0xFFC00404 /* Interrupt Enable Register */ -#define UART_DLH 0xFFC00404 /* Divisor Latch (High-Byte) */ -#define UART_IIR 0xFFC00408 /* Interrupt Identification Register */ -#define UART_LCR 0xFFC0040C /* Line Control Register */ -#define UART_MCR 0xFFC00410 /* Modem Control Register */ -#define UART_LSR 0xFFC00414 /* Line Status Register */ + +/* + * Because include/linux/serial_reg.h have defined UART_*, + * So we define blackfin uart regs to BFIN_UART_*. + */ +#define BFIN_UART_THR 0xFFC00400 /* Transmit Holding register */ +#define BFIN_UART_RBR 0xFFC00400 /* Receive Buffer register */ +#define BFIN_UART_DLL 0xFFC00400 /* Divisor Latch (Low-Byte) */ +#define BFIN_UART_IER 0xFFC00404 /* Interrupt Enable Register */ +#define BFIN_UART_DLH 0xFFC00404 /* Divisor Latch (High-Byte) */ +#define BFIN_UART_IIR 0xFFC00408 /* Interrupt Identification Register */ +#define BFIN_UART_LCR 0xFFC0040C /* Line Control Register */ +#define BFIN_UART_MCR 0xFFC00410 /* Modem Control Register */ +#define BFIN_UART_LSR 0xFFC00414 /* Line Status Register */ #if 0 -#define UART_MSR 0xFFC00418 /* Modem Status Register (UNUSED in ADSP-BF532) */ +#define BFIN_UART_MSR 0xFFC00418 /* Modem Status Register (UNUSED in ADSP-BF532) */ #endif -#define UART_SCR 0xFFC0041C /* SCR Scratch Register */ -#define UART_GCTL 0xFFC00424 /* Global Control Register */ +#define BFIN_UART_SCR 0xFFC0041C /* SCR Scratch Register */ +#define BFIN_UART_GCTL 0xFFC00424 /* Global Control Register */ /* SPI Controller (0xFFC00500 - 0xFFC005FF) */ #define SPI0_REGBASE 0xFFC00500 @@ -463,6 +468,8 @@ #define VLEV_110 0x00B0 /* VLEV = 1.10 V (-5% - +10% Accuracy) */ #define VLEV_115 0x00C0 /* VLEV = 1.15 V (-5% - +10% Accuracy) */ #define VLEV_120 0x00D0 /* VLEV = 1.20 V (-5% - +10% Accuracy) */ +#define VLEV_125 0x00E0 /* VLEV = 1.25 V (-5% - +10% Accuracy) */ +#define VLEV_130 0x00F0 /* VLEV = 1.30 V (-5% - +10% Accuracy) */ #define WAKE 0x0100 /* Enable RTC/Reset Wakeup From Hibernate */ #define SCKELOW 0x8000 /* Do Not Drive SCKE High During Reset After Hibernate */ |