diff options
Diffstat (limited to 'include/asm-blackfin/mach-bf537/blackfin.h')
| -rw-r--r-- | include/asm-blackfin/mach-bf537/blackfin.h | 39 |
1 files changed, 26 insertions, 13 deletions
diff --git a/include/asm-blackfin/mach-bf537/blackfin.h b/include/asm-blackfin/mach-bf537/blackfin.h index 53fcfa3408d..cffc786b2a2 100644 --- a/include/asm-blackfin/mach-bf537/blackfin.h +++ b/include/asm-blackfin/mach-bf537/blackfin.h @@ -82,8 +82,6 @@ #define STATUS_P1 0x02 #define STATUS_P0 0x01 -/* UART 0*/ - /* DMA Channnel */ #define bfin_read_CH_UART_RX() bfin_read_CH_UART0_RX() #define bfin_write_CH_UART_RX(val) bfin_write_CH_UART0_RX(val) @@ -106,37 +104,52 @@ /* MMR Registers*/ #define bfin_read_UART_THR() bfin_read_UART0_THR() #define bfin_write_UART_THR(val) bfin_write_UART0_THR(val) -#define UART_THR UART0_THR +#define BFIN_UART_THR UART0_THR #define bfin_read_UART_RBR() bfin_read_UART0_RBR() #define bfin_write_UART_RBR(val) bfin_write_UART0_RBR(val) -#define UART_RBR UART0_RBR +#define BFIN_UART_RBR UART0_RBR #define bfin_read_UART_DLL() bfin_read_UART0_DLL() #define bfin_write_UART_DLL(val) bfin_write_UART0_DLL(val) -#define UART_DLL UART0_DLL +#define BFIN_UART_DLL UART0_DLL #define bfin_read_UART_IER() bfin_read_UART0_IER() #define bfin_write_UART_IER(val) bfin_write_UART0_IER(val) -#define UART_IER UART0_IER +#define BFIN_UART_IER UART0_IER #define bfin_read_UART_DLH() bfin_read_UART0_DLH() #define bfin_write_UART_DLH(val) bfin_write_UART0_DLH(val) -#define UART_DLH UART0_DLH +#define BFIN_UART_DLH UART0_DLH #define bfin_read_UART_IIR() bfin_read_UART0_IIR() #define bfin_write_UART_IIR(val) bfin_write_UART0_IIR(val) -#define UART_IIR UART0_IIR +#define BFIN_UART_IIR UART0_IIR #define bfin_read_UART_LCR() bfin_read_UART0_LCR() #define bfin_write_UART_LCR(val) bfin_write_UART0_LCR(val) -#define UART_LCR UART0_LCR +#define BFIN_UART_LCR UART0_LCR #define bfin_read_UART_MCR() bfin_read_UART0_MCR() #define bfin_write_UART_MCR(val) bfin_write_UART0_MCR(val) -#define UART_MCR UART0_MCR +#define BFIN_UART_MCR UART0_MCR #define bfin_read_UART_LSR() bfin_read_UART0_LSR() #define bfin_write_UART_LSR(val) bfin_write_UART0_LSR(val) -#define UART_LSR UART0_LSR +#define BFIN_UART_LSR UART0_LSR #define bfin_read_UART_SCR() bfin_read_UART0_SCR() #define bfin_write_UART_SCR(val) bfin_write_UART0_SCR(val) -#define UART_SCR UART0_SCR +#define BFIN_UART_SCR UART0_SCR #define bfin_read_UART_GCTL() bfin_read_UART0_GCTL() #define bfin_write_UART_GCTL(val) bfin_write_UART0_GCTL(val) -#define UART_GCTL UART0_GCTL +#define BFIN_UART_GCTL UART0_GCTL + +#define BFIN_UART_NR_PORTS 2 + +#define OFFSET_THR 0x00 /* Transmit Holding register */ +#define OFFSET_RBR 0x00 /* Receive Buffer register */ +#define OFFSET_DLL 0x00 /* Divisor Latch (Low-Byte) */ +#define OFFSET_IER 0x04 /* Interrupt Enable Register */ +#define OFFSET_DLH 0x04 /* Divisor Latch (High-Byte) */ +#define OFFSET_IIR 0x08 /* Interrupt Identification Register */ +#define OFFSET_LCR 0x0C /* Line Control Register */ +#define OFFSET_MCR 0x10 /* Modem Control Register */ +#define OFFSET_LSR 0x14 /* Line Status Register */ +#define OFFSET_MSR 0x18 /* Modem Status Register */ +#define OFFSET_SCR 0x1C /* SCR Scratch Register */ +#define OFFSET_GCTL 0x24 /* Global Control Register */ /* DPMC*/ #define bfin_read_STOPCK_OFF() bfin_read_STOPCK() |