diff options
Diffstat (limited to 'include/asm-generic')
| -rw-r--r-- | include/asm-generic/dma-coherent.h | 32 | ||||
| -rw-r--r-- | include/asm-generic/dma-mapping-broken.h | 2 | ||||
| -rw-r--r-- | include/asm-generic/dma-mapping.h | 4 | ||||
| -rw-r--r-- | include/asm-generic/gpio.h | 3 | ||||
| -rw-r--r-- | include/asm-generic/pci-dma-compat.h | 4 | ||||
| -rw-r--r-- | include/asm-generic/pgtable-nopmd.h | 6 | ||||
| -rw-r--r-- | include/asm-generic/syscall.h | 141 | ||||
| -rw-r--r-- | include/asm-generic/vmlinux.lds.h | 18 |
8 files changed, 196 insertions, 14 deletions
diff --git a/include/asm-generic/dma-coherent.h b/include/asm-generic/dma-coherent.h new file mode 100644 index 00000000000..85a3ffaa024 --- /dev/null +++ b/include/asm-generic/dma-coherent.h @@ -0,0 +1,32 @@ +#ifndef DMA_COHERENT_H +#define DMA_COHERENT_H + +#ifdef CONFIG_HAVE_GENERIC_DMA_COHERENT +/* + * These two functions are only for dma allocator. + * Don't use them in device drivers. + */ +int dma_alloc_from_coherent(struct device *dev, ssize_t size, + dma_addr_t *dma_handle, void **ret); +int dma_release_from_coherent(struct device *dev, int order, void *vaddr); + +/* + * Standard interface + */ +#define ARCH_HAS_DMA_DECLARE_COHERENT_MEMORY +extern int +dma_declare_coherent_memory(struct device *dev, dma_addr_t bus_addr, + dma_addr_t device_addr, size_t size, int flags); + +extern void +dma_release_declared_memory(struct device *dev); + +extern void * +dma_mark_declared_memory_occupied(struct device *dev, + dma_addr_t device_addr, size_t size); +#else +#define dma_alloc_from_coherent(dev, size, handle, ret) (0) +#define dma_release_from_coherent(dev, order, vaddr) (0) +#endif + +#endif diff --git a/include/asm-generic/dma-mapping-broken.h b/include/asm-generic/dma-mapping-broken.h index e2468f894d2..82cd0cb1c3f 100644 --- a/include/asm-generic/dma-mapping-broken.h +++ b/include/asm-generic/dma-mapping-broken.h @@ -61,7 +61,7 @@ dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, int nelems, #define dma_sync_sg_for_device dma_sync_sg_for_cpu extern int -dma_mapping_error(dma_addr_t dma_addr); +dma_mapping_error(struct device *dev, dma_addr_t dma_addr); extern int dma_supported(struct device *dev, u64 mask); diff --git a/include/asm-generic/dma-mapping.h b/include/asm-generic/dma-mapping.h index 783ab9944d7..189486c3f92 100644 --- a/include/asm-generic/dma-mapping.h +++ b/include/asm-generic/dma-mapping.h @@ -144,9 +144,9 @@ dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, int nelems, } static inline int -dma_mapping_error(dma_addr_t dma_addr) +dma_mapping_error(struct device *dev, dma_addr_t dma_addr) { - return pci_dma_mapping_error(dma_addr); + return pci_dma_mapping_error(to_pci_dev(dev), dma_addr); } diff --git a/include/asm-generic/gpio.h b/include/asm-generic/gpio.h index a3034d20ebd..0f99ad38b01 100644 --- a/include/asm-generic/gpio.h +++ b/include/asm-generic/gpio.h @@ -2,6 +2,7 @@ #define _ASM_GENERIC_GPIO_H #include <linux/types.h> +#include <linux/errno.h> #ifdef CONFIG_GPIOLIB @@ -13,7 +14,7 @@ * * While the GPIO programming interface defines valid GPIO numbers * to be in the range 0..MAX_INT, this library restricts them to the - * smaller range 0..ARCH_NR_GPIOS. + * smaller range 0..ARCH_NR_GPIOS-1. */ #ifndef ARCH_NR_GPIOS diff --git a/include/asm-generic/pci-dma-compat.h b/include/asm-generic/pci-dma-compat.h index 25c10e96b2b..37b3706226e 100644 --- a/include/asm-generic/pci-dma-compat.h +++ b/include/asm-generic/pci-dma-compat.h @@ -99,9 +99,9 @@ pci_dma_sync_sg_for_device(struct pci_dev *hwdev, struct scatterlist *sg, } static inline int -pci_dma_mapping_error(dma_addr_t dma_addr) +pci_dma_mapping_error(struct pci_dev *pdev, dma_addr_t dma_addr) { - return dma_mapping_error(dma_addr); + return dma_mapping_error(&pdev->dev, dma_addr); } #endif diff --git a/include/asm-generic/pgtable-nopmd.h b/include/asm-generic/pgtable-nopmd.h index 087325ede76..a7cdc48e8b7 100644 --- a/include/asm-generic/pgtable-nopmd.h +++ b/include/asm-generic/pgtable-nopmd.h @@ -5,6 +5,8 @@ #include <asm-generic/pgtable-nopud.h> +struct mm_struct; + #define __PAGETABLE_PMD_FOLDED /* @@ -54,7 +56,9 @@ static inline pmd_t * pmd_offset(pud_t * pud, unsigned long address) * inside the pud, so has no extra memory associated with it. */ #define pmd_alloc_one(mm, address) NULL -#define pmd_free(mm, x) do { } while (0) +static inline void pmd_free(struct mm_struct *mm, pmd_t *pmd) +{ +} #define __pmd_free_tlb(tlb, x) do { } while (0) #undef pmd_addr_end diff --git a/include/asm-generic/syscall.h b/include/asm-generic/syscall.h new file mode 100644 index 00000000000..abcf34c2fdc --- /dev/null +++ b/include/asm-generic/syscall.h @@ -0,0 +1,141 @@ +/* + * Access to user system call parameters and results + * + * Copyright (C) 2008 Red Hat, Inc. All rights reserved. + * + * This copyrighted material is made available to anyone wishing to use, + * modify, copy, or redistribute it subject to the terms and conditions + * of the GNU General Public License v.2. + * + * This file is a stub providing documentation for what functions + * asm-ARCH/syscall.h files need to define. Most arch definitions + * will be simple inlines. + * + * All of these functions expect to be called with no locks, + * and only when the caller is sure that the task of interest + * cannot return to user mode while we are looking at it. + */ + +#ifndef _ASM_SYSCALL_H +#define _ASM_SYSCALL_H 1 + +struct task_struct; +struct pt_regs; + +/** + * syscall_get_nr - find what system call a task is executing + * @task: task of interest, must be blocked + * @regs: task_pt_regs() of @task + * + * If @task is executing a system call or is at system call + * tracing about to attempt one, returns the system call number. + * If @task is not executing a system call, i.e. it's blocked + * inside the kernel for a fault or signal, returns -1. + * + * It's only valid to call this when @task is known to be blocked. + */ +long syscall_get_nr(struct task_struct *task, struct pt_regs *regs); + +/** + * syscall_rollback - roll back registers after an aborted system call + * @task: task of interest, must be in system call exit tracing + * @regs: task_pt_regs() of @task + * + * It's only valid to call this when @task is stopped for system + * call exit tracing (due to TIF_SYSCALL_TRACE or TIF_SYSCALL_AUDIT), + * after tracehook_report_syscall_entry() returned nonzero to prevent + * the system call from taking place. + * + * This rolls back the register state in @regs so it's as if the + * system call instruction was a no-op. The registers containing + * the system call number and arguments are as they were before the + * system call instruction. This may not be the same as what the + * register state looked like at system call entry tracing. + */ +void syscall_rollback(struct task_struct *task, struct pt_regs *regs); + +/** + * syscall_get_error - check result of traced system call + * @task: task of interest, must be blocked + * @regs: task_pt_regs() of @task + * + * Returns 0 if the system call succeeded, or -ERRORCODE if it failed. + * + * It's only valid to call this when @task is stopped for tracing on exit + * from a system call, due to %TIF_SYSCALL_TRACE or %TIF_SYSCALL_AUDIT. + */ +long syscall_get_error(struct task_struct *task, struct pt_regs *regs); + +/** + * syscall_get_return_value - get the return value of a traced system call + * @task: task of interest, must be blocked + * @regs: task_pt_regs() of @task + * + * Returns the return value of the successful system call. + * This value is meaningless if syscall_get_error() returned nonzero. + * + * It's only valid to call this when @task is stopped for tracing on exit + * from a system call, due to %TIF_SYSCALL_TRACE or %TIF_SYSCALL_AUDIT. + */ +long syscall_get_return_value(struct task_struct *task, struct pt_regs *regs); + +/** + * syscall_set_return_value - change the return value of a traced system call + * @task: task of interest, must be blocked + * @regs: task_pt_regs() of @task + * @error: negative error code, or zero to indicate success + * @val: user return value if @error is zero + * + * This changes the results of the system call that user mode will see. + * If @error is zero, the user sees a successful system call with a + * return value of @val. If @error is nonzero, it's a negated errno + * code; the user sees a failed system call with this errno code. + * + * It's only valid to call this when @task is stopped for tracing on exit + * from a system call, due to %TIF_SYSCALL_TRACE or %TIF_SYSCALL_AUDIT. + */ +void syscall_set_return_value(struct task_struct *task, struct pt_regs *regs, + int error, long val); + +/** + * syscall_get_arguments - extract system call parameter values + * @task: task of interest, must be blocked + * @regs: task_pt_regs() of @task + * @i: argument index [0,5] + * @n: number of arguments; n+i must be [1,6]. + * @args: array filled with argument values + * + * Fetches @n arguments to the system call starting with the @i'th argument + * (from 0 through 5). Argument @i is stored in @args[0], and so on. + * An arch inline version is probably optimal when @i and @n are constants. + * + * It's only valid to call this when @task is stopped for tracing on + * entry to a system call, due to %TIF_SYSCALL_TRACE or %TIF_SYSCALL_AUDIT. + * It's invalid to call this with @i + @n > 6; we only support system calls + * taking up to 6 arguments. + */ +void syscall_get_arguments(struct task_struct *task, struct pt_regs *regs, + unsigned int i, unsigned int n, unsigned long *args); + +/** + * syscall_set_arguments - change system call parameter value + * @task: task of interest, must be in system call entry tracing + * @regs: task_pt_regs() of @task + * @i: argument index [0,5] + * @n: number of arguments; n+i must be [1,6]. + * @args: array of argument values to store + * + * Changes @n arguments to the system call starting with the @i'th argument. + * @n'th argument to @val. Argument @i gets value @args[0], and so on. + * An arch inline version is probably optimal when @i and @n are constants. + * + * It's only valid to call this when @task is stopped for tracing on + * entry to a system call, due to %TIF_SYSCALL_TRACE or %TIF_SYSCALL_AUDIT. + * It's invalid to call this with @i + @n > 6; we only support system calls + * taking up to 6 arguments. + */ +void syscall_set_arguments(struct task_struct *task, struct pt_regs *regs, + unsigned int i, unsigned int n, + const unsigned long *args); + +#endif /* _ASM_SYSCALL_H */ diff --git a/include/asm-generic/vmlinux.lds.h b/include/asm-generic/vmlinux.lds.h index 729f6b0a60e..cb752ba7246 100644 --- a/include/asm-generic/vmlinux.lds.h +++ b/include/asm-generic/vmlinux.lds.h @@ -221,6 +221,7 @@ * during second ld run in second ld pass when generating System.map */ #define TEXT_TEXT \ ALIGN_FUNCTION(); \ + *(.text.hot) \ *(.text) \ *(.ref.text) \ *(.text.init.refok) \ @@ -230,7 +231,8 @@ CPU_KEEP(init.text) \ CPU_KEEP(exit.text) \ MEM_KEEP(init.text) \ - MEM_KEEP(exit.text) + MEM_KEEP(exit.text) \ + *(.text.unlikely) /* sched.text is aling to function alignment to secure we have same @@ -331,9 +333,9 @@ #define BUG_TABLE \ . = ALIGN(8); \ __bug_table : AT(ADDR(__bug_table) - LOAD_OFFSET) { \ - __start___bug_table = .; \ + VMLINUX_SYMBOL(__start___bug_table) = .; \ *(__bug_table) \ - __stop___bug_table = .; \ + VMLINUX_SYMBOL(__stop___bug_table) = .; \ } #else #define BUG_TABLE @@ -343,9 +345,9 @@ #define TRACEDATA \ . = ALIGN(4); \ .tracedata : AT(ADDR(.tracedata) - LOAD_OFFSET) { \ - __tracedata_start = .; \ + VMLINUX_SYMBOL(__tracedata_start) = .; \ *(.tracedata) \ - __tracedata_end = .; \ + VMLINUX_SYMBOL(__tracedata_end) = .; \ } #else #define TRACEDATA @@ -359,6 +361,8 @@ } #define INITCALLS \ + *(.initcallearly.init) \ + VMLINUX_SYMBOL(__early_initcall_end) = .; \ *(.initcall0.init) \ *(.initcall0s.init) \ *(.initcall1.init) \ @@ -379,9 +383,9 @@ #define PERCPU(align) \ . = ALIGN(align); \ - __per_cpu_start = .; \ + VMLINUX_SYMBOL(__per_cpu_start) = .; \ .data.percpu : AT(ADDR(.data.percpu) - LOAD_OFFSET) { \ *(.data.percpu) \ *(.data.percpu.shared_aligned) \ } \ - __per_cpu_end = .; + VMLINUX_SYMBOL(__per_cpu_end) = .; |