diff options
Diffstat (limited to 'include/asm-i386/io.h')
| -rw-r--r-- | include/asm-i386/io.h | 349 |
1 files changed, 0 insertions, 349 deletions
diff --git a/include/asm-i386/io.h b/include/asm-i386/io.h deleted file mode 100644 index e8e0bd64112..00000000000 --- a/include/asm-i386/io.h +++ /dev/null @@ -1,349 +0,0 @@ -#ifndef _ASM_IO_H -#define _ASM_IO_H - -#include <linux/string.h> -#include <linux/compiler.h> - -/* - * This file contains the definitions for the x86 IO instructions - * inb/inw/inl/outb/outw/outl and the "string versions" of the same - * (insb/insw/insl/outsb/outsw/outsl). You can also use "pausing" - * versions of the single-IO instructions (inb_p/inw_p/..). - * - * This file is not meant to be obfuscating: it's just complicated - * to (a) handle it all in a way that makes gcc able to optimize it - * as well as possible and (b) trying to avoid writing the same thing - * over and over again with slight variations and possibly making a - * mistake somewhere. - */ - -/* - * Thanks to James van Artsdalen for a better timing-fix than - * the two short jumps: using outb's to a nonexistent port seems - * to guarantee better timings even on fast machines. - * - * On the other hand, I'd like to be sure of a non-existent port: - * I feel a bit unsafe about using 0x80 (should be safe, though) - * - * Linus - */ - - /* - * Bit simplified and optimized by Jan Hubicka - * Support of BIGMEM added by Gerhard Wichert, Siemens AG, July 1999. - * - * isa_memset_io, isa_memcpy_fromio, isa_memcpy_toio added, - * isa_read[wl] and isa_write[wl] fixed - * - Arnaldo Carvalho de Melo <acme@conectiva.com.br> - */ - -#define IO_SPACE_LIMIT 0xffff - -#define XQUAD_PORTIO_BASE 0xfe400000 -#define XQUAD_PORTIO_QUAD 0x40000 /* 256k per quad. */ - -#ifdef __KERNEL__ - -#include <asm-generic/iomap.h> - -#include <linux/vmalloc.h> - -/* - * Convert a physical pointer to a virtual kernel pointer for /dev/mem - * access - */ -#define xlate_dev_mem_ptr(p) __va(p) - -/* - * Convert a virtual cached pointer to an uncached pointer - */ -#define xlate_dev_kmem_ptr(p) p - -/** - * virt_to_phys - map virtual addresses to physical - * @address: address to remap - * - * The returned physical address is the physical (CPU) mapping for - * the memory address given. It is only valid to use this function on - * addresses directly mapped or allocated via kmalloc. - * - * This function does not give bus mappings for DMA transfers. In - * almost all conceivable cases a device driver should not be using - * this function - */ - -static inline unsigned long virt_to_phys(volatile void * address) -{ - return __pa(address); -} - -/** - * phys_to_virt - map physical address to virtual - * @address: address to remap - * - * The returned virtual address is a current CPU mapping for - * the memory address given. It is only valid to use this function on - * addresses that have a kernel mapping - * - * This function does not handle bus mappings for DMA transfers. In - * almost all conceivable cases a device driver should not be using - * this function - */ - -static inline void * phys_to_virt(unsigned long address) -{ - return __va(address); -} - -/* - * Change "struct page" to physical address. - */ -#define page_to_phys(page) ((dma_addr_t)page_to_pfn(page) << PAGE_SHIFT) - -extern void __iomem * __ioremap(unsigned long offset, unsigned long size, unsigned long flags); - -/** - * ioremap - map bus memory into CPU space - * @offset: bus address of the memory - * @size: size of the resource to map - * - * ioremap performs a platform specific sequence of operations to - * make bus memory CPU accessible via the readb/readw/readl/writeb/ - * writew/writel functions and the other mmio helpers. The returned - * address is not guaranteed to be usable directly as a virtual - * address. - * - * If the area you are trying to map is a PCI BAR you should have a - * look at pci_iomap(). - */ - -static inline void __iomem * ioremap(unsigned long offset, unsigned long size) -{ - return __ioremap(offset, size, 0); -} - -extern void __iomem * ioremap_nocache(unsigned long offset, unsigned long size); -extern void iounmap(volatile void __iomem *addr); - -/* - * bt_ioremap() and bt_iounmap() are for temporary early boot-time - * mappings, before the real ioremap() is functional. - * A boot-time mapping is currently limited to at most 16 pages. - */ -extern void *bt_ioremap(unsigned long offset, unsigned long size); -extern void bt_iounmap(void *addr, unsigned long size); -extern void __iomem *fix_ioremap(unsigned idx, unsigned long phys); - -/* Use early IO mappings for DMI because it's initialized early */ -#define dmi_ioremap bt_ioremap -#define dmi_iounmap bt_iounmap -#define dmi_alloc alloc_bootmem - -/* - * ISA I/O bus memory addresses are 1:1 with the physical address. - */ -#define isa_virt_to_bus virt_to_phys -#define isa_page_to_bus page_to_phys -#define isa_bus_to_virt phys_to_virt - -/* - * However PCI ones are not necessarily 1:1 and therefore these interfaces - * are forbidden in portable PCI drivers. - * - * Allow them on x86 for legacy drivers, though. - */ -#define virt_to_bus virt_to_phys -#define bus_to_virt phys_to_virt - -/* - * readX/writeX() are used to access memory mapped devices. On some - * architectures the memory mapped IO stuff needs to be accessed - * differently. On the x86 architecture, we just read/write the - * memory location directly. - */ - -static inline unsigned char readb(const volatile void __iomem *addr) -{ - return *(volatile unsigned char __force *) addr; -} -static inline unsigned short readw(const volatile void __iomem *addr) -{ - return *(volatile unsigned short __force *) addr; -} -static inline unsigned int readl(const volatile void __iomem *addr) -{ - return *(volatile unsigned int __force *) addr; -} -#define readb_relaxed(addr) readb(addr) -#define readw_relaxed(addr) readw(addr) -#define readl_relaxed(addr) readl(addr) -#define __raw_readb readb -#define __raw_readw readw -#define __raw_readl readl - -static inline void writeb(unsigned char b, volatile void __iomem *addr) -{ - *(volatile unsigned char __force *) addr = b; -} -static inline void writew(unsigned short b, volatile void __iomem *addr) -{ - *(volatile unsigned short __force *) addr = b; -} -static inline void writel(unsigned int b, volatile void __iomem *addr) -{ - *(volatile unsigned int __force *) addr = b; -} -#define __raw_writeb writeb -#define __raw_writew writew -#define __raw_writel writel - -#define mmiowb() - -static inline void memset_io(volatile void __iomem *addr, unsigned char val, int count) -{ - memset((void __force *) addr, val, count); -} -static inline void memcpy_fromio(void *dst, const volatile void __iomem *src, int count) -{ - __memcpy(dst, (void __force *) src, count); -} -static inline void memcpy_toio(volatile void __iomem *dst, const void *src, int count) -{ - __memcpy((void __force *) dst, src, count); -} - -/* - * ISA space is 'always mapped' on a typical x86 system, no need to - * explicitly ioremap() it. The fact that the ISA IO space is mapped - * to PAGE_OFFSET is pure coincidence - it does not mean ISA values - * are physical addresses. The following constant pointer can be - * used as the IO-area pointer (it can be iounmapped as well, so the - * analogy with PCI is quite large): - */ -#define __ISA_IO_base ((char __iomem *)(PAGE_OFFSET)) - -/* - * Cache management - * - * This needed for two cases - * 1. Out of order aware processors - * 2. Accidentally out of order processors (PPro errata #51) - */ - -#if defined(CONFIG_X86_OOSTORE) || defined(CONFIG_X86_PPRO_FENCE) - -static inline void flush_write_buffers(void) -{ - __asm__ __volatile__ ("lock; addl $0,0(%%esp)": : :"memory"); -} - -#define dma_cache_inv(_start,_size) flush_write_buffers() -#define dma_cache_wback(_start,_size) flush_write_buffers() -#define dma_cache_wback_inv(_start,_size) flush_write_buffers() - -#else - -/* Nothing to do */ - -#define dma_cache_inv(_start,_size) do { } while (0) -#define dma_cache_wback(_start,_size) do { } while (0) -#define dma_cache_wback_inv(_start,_size) do { } while (0) -#define flush_write_buffers() - -#endif - -#endif /* __KERNEL__ */ - -static inline void native_io_delay(void) -{ - asm volatile("outb %%al,$0x80" : : : "memory"); -} - -#if defined(CONFIG_PARAVIRT) -#include <asm/paravirt.h> -#else - -static inline void slow_down_io(void) { - native_io_delay(); -#ifdef REALLY_SLOW_IO - native_io_delay(); - native_io_delay(); - native_io_delay(); -#endif -} - -#endif - -#ifdef CONFIG_X86_NUMAQ -extern void *xquad_portio; /* Where the IO area was mapped */ -#define XQUAD_PORT_ADDR(port, quad) (xquad_portio + (XQUAD_PORTIO_QUAD*quad) + port) -#define __BUILDIO(bwl,bw,type) \ -static inline void out##bwl##_quad(unsigned type value, int port, int quad) { \ - if (xquad_portio) \ - write##bwl(value, XQUAD_PORT_ADDR(port, quad)); \ - else \ - out##bwl##_local(value, port); \ -} \ -static inline void out##bwl(unsigned type value, int port) { \ - out##bwl##_quad(value, port, 0); \ -} \ -static inline unsigned type in##bwl##_quad(int port, int quad) { \ - if (xquad_portio) \ - return read##bwl(XQUAD_PORT_ADDR(port, quad)); \ - else \ - return in##bwl##_local(port); \ -} \ -static inline unsigned type in##bwl(int port) { \ - return in##bwl##_quad(port, 0); \ -} -#else -#define __BUILDIO(bwl,bw,type) \ -static inline void out##bwl(unsigned type value, int port) { \ - out##bwl##_local(value, port); \ -} \ -static inline unsigned type in##bwl(int port) { \ - return in##bwl##_local(port); \ -} -#endif - - -#define BUILDIO(bwl,bw,type) \ -static inline void out##bwl##_local(unsigned type value, int port) { \ - __asm__ __volatile__("out" #bwl " %" #bw "0, %w1" : : "a"(value), "Nd"(port)); \ -} \ -static inline unsigned type in##bwl##_local(int port) { \ - unsigned type value; \ - __asm__ __volatile__("in" #bwl " %w1, %" #bw "0" : "=a"(value) : "Nd"(port)); \ - return value; \ -} \ -static inline void out##bwl##_local_p(unsigned type value, int port) { \ - out##bwl##_local(value, port); \ - slow_down_io(); \ -} \ -static inline unsigned type in##bwl##_local_p(int port) { \ - unsigned type value = in##bwl##_local(port); \ - slow_down_io(); \ - return value; \ -} \ -__BUILDIO(bwl,bw,type) \ -static inline void out##bwl##_p(unsigned type value, int port) { \ - out##bwl(value, port); \ - slow_down_io(); \ -} \ -static inline unsigned type in##bwl##_p(int port) { \ - unsigned type value = in##bwl(port); \ - slow_down_io(); \ - return value; \ -} \ -static inline void outs##bwl(int port, const void *addr, unsigned long count) { \ - __asm__ __volatile__("rep; outs" #bwl : "+S"(addr), "+c"(count) : "d"(port)); \ -} \ -static inline void ins##bwl(int port, void *addr, unsigned long count) { \ - __asm__ __volatile__("rep; ins" #bwl : "+D"(addr), "+c"(count) : "d"(port)); \ -} - -BUILDIO(b,b,char) -BUILDIO(w,w,short) -BUILDIO(l,,int) - -#endif |