diff options
Diffstat (limited to 'include/asm-i386/system.h')
| -rw-r--r-- | include/asm-i386/system.h | 473 |
1 files changed, 473 insertions, 0 deletions
diff --git a/include/asm-i386/system.h b/include/asm-i386/system.h new file mode 100644 index 00000000000..6f74d4c44a0 --- /dev/null +++ b/include/asm-i386/system.h @@ -0,0 +1,473 @@ +#ifndef __ASM_SYSTEM_H +#define __ASM_SYSTEM_H + +#include <linux/config.h> +#include <linux/kernel.h> +#include <asm/segment.h> +#include <asm/cpufeature.h> +#include <linux/bitops.h> /* for LOCK_PREFIX */ + +#ifdef __KERNEL__ + +struct task_struct; /* one of the stranger aspects of C forward declarations.. */ +extern struct task_struct * FASTCALL(__switch_to(struct task_struct *prev, struct task_struct *next)); + +#define switch_to(prev,next,last) do { \ + unsigned long esi,edi; \ + asm volatile("pushfl\n\t" \ + "pushl %%ebp\n\t" \ + "movl %%esp,%0\n\t" /* save ESP */ \ + "movl %5,%%esp\n\t" /* restore ESP */ \ + "movl $1f,%1\n\t" /* save EIP */ \ + "pushl %6\n\t" /* restore EIP */ \ + "jmp __switch_to\n" \ + "1:\t" \ + "popl %%ebp\n\t" \ + "popfl" \ + :"=m" (prev->thread.esp),"=m" (prev->thread.eip), \ + "=a" (last),"=S" (esi),"=D" (edi) \ + :"m" (next->thread.esp),"m" (next->thread.eip), \ + "2" (prev), "d" (next)); \ +} while (0) + +#define _set_base(addr,base) do { unsigned long __pr; \ +__asm__ __volatile__ ("movw %%dx,%1\n\t" \ + "rorl $16,%%edx\n\t" \ + "movb %%dl,%2\n\t" \ + "movb %%dh,%3" \ + :"=&d" (__pr) \ + :"m" (*((addr)+2)), \ + "m" (*((addr)+4)), \ + "m" (*((addr)+7)), \ + "0" (base) \ + ); } while(0) + +#define _set_limit(addr,limit) do { unsigned long __lr; \ +__asm__ __volatile__ ("movw %%dx,%1\n\t" \ + "rorl $16,%%edx\n\t" \ + "movb %2,%%dh\n\t" \ + "andb $0xf0,%%dh\n\t" \ + "orb %%dh,%%dl\n\t" \ + "movb %%dl,%2" \ + :"=&d" (__lr) \ + :"m" (*(addr)), \ + "m" (*((addr)+6)), \ + "0" (limit) \ + ); } while(0) + +#define set_base(ldt,base) _set_base( ((char *)&(ldt)) , (base) ) +#define set_limit(ldt,limit) _set_limit( ((char *)&(ldt)) , ((limit)-1)>>12 ) + +static inline unsigned long _get_base(char * addr) +{ + unsigned long __base; + __asm__("movb %3,%%dh\n\t" + "movb %2,%%dl\n\t" + "shll $16,%%edx\n\t" + "movw %1,%%dx" + :"=&d" (__base) + :"m" (*((addr)+2)), + "m" (*((addr)+4)), + "m" (*((addr)+7))); + return __base; +} + +#define get_base(ldt) _get_base( ((char *)&(ldt)) ) + +/* + * Load a segment. Fall back on loading the zero + * segment if something goes wrong.. + */ +#define loadsegment(seg,value) \ + asm volatile("\n" \ + "1:\t" \ + "movl %0,%%" #seg "\n" \ + "2:\n" \ + ".section .fixup,\"ax\"\n" \ + "3:\t" \ + "pushl $0\n\t" \ + "popl %%" #seg "\n\t" \ + "jmp 2b\n" \ + ".previous\n" \ + ".section __ex_table,\"a\"\n\t" \ + ".align 4\n\t" \ + ".long 1b,3b\n" \ + ".previous" \ + : :"m" (*(unsigned int *)&(value))) + +/* + * Save a segment register away + */ +#define savesegment(seg, value) \ + asm volatile("movl %%" #seg ",%0":"=m" (*(int *)&(value))) + +/* + * Clear and set 'TS' bit respectively + */ +#define clts() __asm__ __volatile__ ("clts") +#define read_cr0() ({ \ + unsigned int __dummy; \ + __asm__( \ + "movl %%cr0,%0\n\t" \ + :"=r" (__dummy)); \ + __dummy; \ +}) +#define write_cr0(x) \ + __asm__("movl %0,%%cr0": :"r" (x)); + +#define read_cr4() ({ \ + unsigned int __dummy; \ + __asm__( \ + "movl %%cr4,%0\n\t" \ + :"=r" (__dummy)); \ + __dummy; \ +}) +#define write_cr4(x) \ + __asm__("movl %0,%%cr4": :"r" (x)); +#define stts() write_cr0(8 | read_cr0()) + +#endif /* __KERNEL__ */ + +#define wbinvd() \ + __asm__ __volatile__ ("wbinvd": : :"memory"); + +static inline unsigned long get_limit(unsigned long segment) +{ + unsigned long __limit; + __asm__("lsll %1,%0" + :"=r" (__limit):"r" (segment)); + return __limit+1; +} + +#define nop() __asm__ __volatile__ ("nop") + +#define xchg(ptr,v) ((__typeof__(*(ptr)))__xchg((unsigned long)(v),(ptr),sizeof(*(ptr)))) + +#define tas(ptr) (xchg((ptr),1)) + +struct __xchg_dummy { unsigned long a[100]; }; +#define __xg(x) ((struct __xchg_dummy *)(x)) + + +/* + * The semantics of XCHGCMP8B are a bit strange, this is why + * there is a loop and the loading of %%eax and %%edx has to + * be inside. This inlines well in most cases, the cached + * cost is around ~38 cycles. (in the future we might want + * to do an SIMD/3DNOW!/MMX/FPU 64-bit store here, but that + * might have an implicit FPU-save as a cost, so it's not + * clear which path to go.) + * + * cmpxchg8b must be used with the lock prefix here to allow + * the instruction to be executed atomically, see page 3-102 + * of the instruction set reference 24319102.pdf. We need + * the reader side to see the coherent 64bit value. + */ +static inline void __set_64bit (unsigned long long * ptr, + unsigned int low, unsigned int high) +{ + __asm__ __volatile__ ( + "\n1:\t" + "movl (%0), %%eax\n\t" + "movl 4(%0), %%edx\n\t" + "lock cmpxchg8b (%0)\n\t" + "jnz 1b" + : /* no outputs */ + : "D"(ptr), + "b"(low), + "c"(high) + : "ax","dx","memory"); +} + +static inline void __set_64bit_constant (unsigned long long *ptr, + unsigned long long value) +{ + __set_64bit(ptr,(unsigned int)(value), (unsigned int)((value)>>32ULL)); +} +#define ll_low(x) *(((unsigned int*)&(x))+0) +#define ll_high(x) *(((unsigned int*)&(x))+1) + +static inline void __set_64bit_var (unsigned long long *ptr, + unsigned long long value) +{ + __set_64bit(ptr,ll_low(value), ll_high(value)); +} + +#define set_64bit(ptr,value) \ +(__builtin_constant_p(value) ? \ + __set_64bit_constant(ptr, value) : \ + __set_64bit_var(ptr, value) ) + +#define _set_64bit(ptr,value) \ +(__builtin_constant_p(value) ? \ + __set_64bit(ptr, (unsigned int)(value), (unsigned int)((value)>>32ULL) ) : \ + __set_64bit(ptr, ll_low(value), ll_high(value)) ) + +/* + * Note: no "lock" prefix even on SMP: xchg always implies lock anyway + * Note 2: xchg has side effect, so that attribute volatile is necessary, + * but generally the primitive is invalid, *ptr is output argument. --ANK + */ +static inline unsigned long __xchg(unsigned long x, volatile void * ptr, int size) +{ + switch (size) { + case 1: + __asm__ __volatile__("xchgb %b0,%1" + :"=q" (x) + :"m" (*__xg(ptr)), "0" (x) + :"memory"); + break; + case 2: + __asm__ __volatile__("xchgw %w0,%1" + :"=r" (x) + :"m" (*__xg(ptr)), "0" (x) + :"memory"); + break; + case 4: + __asm__ __volatile__("xchgl %0,%1" + :"=r" (x) + :"m" (*__xg(ptr)), "0" (x) + :"memory"); + break; + } + return x; +} + +/* + * Atomic compare and exchange. Compare OLD with MEM, if identical, + * store NEW in MEM. Return the initial value in MEM. Success is + * indicated by comparing RETURN with OLD. + */ + +#ifdef CONFIG_X86_CMPXCHG +#define __HAVE_ARCH_CMPXCHG 1 +#endif + +static inline unsigned long __cmpxchg(volatile void *ptr, unsigned long old, + unsigned long new, int size) +{ + unsigned long prev; + switch (size) { + case 1: + __asm__ __volatile__(LOCK_PREFIX "cmpxchgb %b1,%2" + : "=a"(prev) + : "q"(new), "m"(*__xg(ptr)), "0"(old) + : "memory"); + return prev; + case 2: + __asm__ __volatile__(LOCK_PREFIX "cmpxchgw %w1,%2" + : "=a"(prev) + : "q"(new), "m"(*__xg(ptr)), "0"(old) + : "memory"); + return prev; + case 4: + __asm__ __volatile__(LOCK_PREFIX "cmpxchgl %1,%2" + : "=a"(prev) + : "q"(new), "m"(*__xg(ptr)), "0"(old) + : "memory"); + return prev; + } + return old; +} + +#define cmpxchg(ptr,o,n)\ + ((__typeof__(*(ptr)))__cmpxchg((ptr),(unsigned long)(o),\ + (unsigned long)(n),sizeof(*(ptr)))) + +#ifdef __KERNEL__ +struct alt_instr { + __u8 *instr; /* original instruction */ + __u8 *replacement; + __u8 cpuid; /* cpuid bit set for replacement */ + __u8 instrlen; /* length of original instruction */ + __u8 replacementlen; /* length of new instruction, <= instrlen */ + __u8 pad; +}; +#endif + +/* + * Alternative instructions for different CPU types or capabilities. + * + * This allows to use optimized instructions even on generic binary + * kernels. + * + * length of oldinstr must be longer or equal the length of newinstr + * It can be padded with nops as needed. + * + * For non barrier like inlines please define new variants + * without volatile and memory clobber. + */ +#define alternative(oldinstr, newinstr, feature) \ + asm volatile ("661:\n\t" oldinstr "\n662:\n" \ + ".section .altinstructions,\"a\"\n" \ + " .align 4\n" \ + " .long 661b\n" /* label */ \ + " .long 663f\n" /* new instruction */ \ + " .byte %c0\n" /* feature bit */ \ + " .byte 662b-661b\n" /* sourcelen */ \ + " .byte 664f-663f\n" /* replacementlen */ \ + ".previous\n" \ + ".section .altinstr_replacement,\"ax\"\n" \ + "663:\n\t" newinstr "\n664:\n" /* replacement */ \ + ".previous" :: "i" (feature) : "memory") + +/* + * Alternative inline assembly with input. + * + * Pecularities: + * No memory clobber here. + * Argument numbers start with 1. + * Best is to use constraints that are fixed size (like (%1) ... "r") + * If you use variable sized constraints like "m" or "g" in the + * replacement maake sure to pad to the worst case length. + */ +#define alternative_input(oldinstr, newinstr, feature, input...) \ + asm volatile ("661:\n\t" oldinstr "\n662:\n" \ + ".section .altinstructions,\"a\"\n" \ + " .align 4\n" \ + " .long 661b\n" /* label */ \ + " .long 663f\n" /* new instruction */ \ + " .byte %c0\n" /* feature bit */ \ + " .byte 662b-661b\n" /* sourcelen */ \ + " .byte 664f-663f\n" /* replacementlen */ \ + ".previous\n" \ + ".section .altinstr_replacement,\"ax\"\n" \ + "663:\n\t" newinstr "\n664:\n" /* replacement */ \ + ".previous" :: "i" (feature), ##input) + +/* + * Force strict CPU ordering. + * And yes, this is required on UP too when we're talking + * to devices. + * + * For now, "wmb()" doesn't actually do anything, as all + * Intel CPU's follow what Intel calls a *Processor Order*, + * in which all writes are seen in the program order even + * outside the CPU. + * + * I expect future Intel CPU's to have a weaker ordering, + * but I'd also expect them to finally get their act together + * and add some real memory barriers if so. + * + * Some non intel clones support out of order store. wmb() ceases to be a + * nop for these. + */ + + +/* + * Actually only lfence would be needed for mb() because all stores done + * by the kernel should be already ordered. But keep a full barrier for now. + */ + +#define mb() alternative("lock; addl $0,0(%%esp)", "mfence", X86_FEATURE_XMM2) +#define rmb() alternative("lock; addl $0,0(%%esp)", "lfence", X86_FEATURE_XMM2) + +/** + * read_barrier_depends - Flush all pending reads that subsequents reads + * depend on. + * + * No data-dependent reads from memory-like regions are ever reordered + * over this barrier. All reads preceding this primitive are guaranteed + * to access memory (but not necessarily other CPUs' caches) before any + * reads following this primitive that depend on the data return by + * any of the preceding reads. This primitive is much lighter weight than + * rmb() on most CPUs, and is never heavier weight than is + * rmb(). + * + * These ordering constraints are respected by both the local CPU + * and the compiler. + * + * Ordering is not guaranteed by anything other than these primitives, + * not even by data dependencies. See the documentation for + * memory_barrier() for examples and URLs to more information. + * + * For example, the following code would force ordering (the initial + * value of "a" is zero, "b" is one, and "p" is "&a"): + * + * <programlisting> + * CPU 0 CPU 1 + * + * b = 2; + * memory_barrier(); + * p = &b; q = p; + * read_barrier_depends(); + * d = *q; + * </programlisting> + * + * because the read of "*q" depends on the read of "p" and these + * two reads are separated by a read_barrier_depends(). However, + * the following code, with the same initial values for "a" and "b": + * + * <programlisting> + * CPU 0 CPU 1 + * + * a = 2; + * memory_barrier(); + * b = 3; y = b; + * read_barrier_depends(); + * x = a; + * </programlisting> + * + * does not enforce ordering, since there is no data dependency between + * the read of "a" and the read of "b". Therefore, on some CPUs, such + * as Alpha, "y" could be set to 3 and "x" to 0. Use rmb() + * in cases like thiswhere there are no data dependencies. + **/ + +#define read_barrier_depends() do { } while(0) + +#ifdef CONFIG_X86_OOSTORE +/* Actually there are no OOO store capable CPUs for now that do SSE, + but make it already an possibility. */ +#define wmb() alternative("lock; addl $0,0(%%esp)", "sfence", X86_FEATURE_XMM) +#else +#define wmb() __asm__ __volatile__ ("": : :"memory") +#endif + +#ifdef CONFIG_SMP +#define smp_mb() mb() +#define smp_rmb() rmb() +#define smp_wmb() wmb() +#define smp_read_barrier_depends() read_barrier_depends() +#define set_mb(var, value) do { xchg(&var, value); } while (0) +#else +#define smp_mb() barrier() +#define smp_rmb() barrier() +#define smp_wmb() barrier() +#define smp_read_barrier_depends() do { } while(0) +#define set_mb(var, value) do { var = value; barrier(); } while (0) +#endif + +#define set_wmb(var, value) do { var = value; wmb(); } while (0) + +/* interrupt control.. */ +#define local_save_flags(x) do { typecheck(unsigned long,x); __asm__ __volatile__("pushfl ; popl %0":"=g" (x): /* no input */); } while (0) +#define local_irq_restore(x) do { typecheck(unsigned long,x); __asm__ __volatile__("pushl %0 ; popfl": /* no output */ :"g" (x):"memory", "cc"); } while (0) +#define local_irq_disable() __asm__ __volatile__("cli": : :"memory") +#define local_irq_enable() __asm__ __volatile__("sti": : :"memory") +/* used in the idle loop; sti takes one instruction cycle to complete */ +#define safe_halt() __asm__ __volatile__("sti; hlt": : :"memory") + +#define irqs_disabled() \ +({ \ + unsigned long flags; \ + local_save_flags(flags); \ + !(flags & (1<<9)); \ +}) + +/* For spinlocks etc */ +#define local_irq_save(x) __asm__ __volatile__("pushfl ; popl %0 ; cli":"=g" (x): /* no input */ :"memory") + +/* + * disable hlt during certain critical i/o operations + */ +#define HAVE_DISABLE_HLT +void disable_hlt(void); +void enable_hlt(void); + +extern int es7000_plat; +void cpu_idle_wait(void); + +extern unsigned long arch_align_stack(unsigned long sp); + +#endif |