diff options
Diffstat (limited to 'include/asm-ia64/sn/klconfig.h')
| -rw-r--r-- | include/asm-ia64/sn/klconfig.h | 272 |
1 files changed, 272 insertions, 0 deletions
diff --git a/include/asm-ia64/sn/klconfig.h b/include/asm-ia64/sn/klconfig.h new file mode 100644 index 00000000000..9f920c70a62 --- /dev/null +++ b/include/asm-ia64/sn/klconfig.h @@ -0,0 +1,272 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Derived from IRIX <sys/SN/klconfig.h>. + * + * Copyright (C) 1992-1997,1999,2001-2004 Silicon Graphics, Inc. All Rights Reserved. + * Copyright (C) 1999 by Ralf Baechle + */ +#ifndef _ASM_IA64_SN_KLCONFIG_H +#define _ASM_IA64_SN_KLCONFIG_H + +/* + * The KLCONFIG structures store info about the various BOARDs found + * during Hardware Discovery. In addition, it stores info about the + * components found on the BOARDs. + */ + +typedef s32 klconf_off_t; + + +/* Functions/macros needed to use this structure */ + +typedef struct kl_config_hdr { + char pad[20]; + klconf_off_t ch_board_info; /* the link list of boards */ + char pad0[88]; +} kl_config_hdr_t; + + +#define NODE_OFFSET_TO_LBOARD(nasid,off) (lboard_t*)(GLOBAL_CAC_ADDR((nasid), (off))) + +/* + * The KLCONFIG area is organized as a LINKED LIST of BOARDs. A BOARD + * can be either 'LOCAL' or 'REMOTE'. LOCAL means it is attached to + * the LOCAL/current NODE. REMOTE means it is attached to a different + * node.(TBD - Need a way to treat ROUTER boards.) + * + * There are 2 different structures to represent these boards - + * lboard - Local board, rboard - remote board. These 2 structures + * can be arbitrarily mixed in the LINKED LIST of BOARDs. (Refer + * Figure below). The first byte of the rboard or lboard structure + * is used to find out its type - no unions are used. + * If it is a lboard, then the config info of this board will be found + * on the local node. (LOCAL NODE BASE + offset value gives pointer to + * the structure. + * If it is a rboard, the local structure contains the node number + * and the offset of the beginning of the LINKED LIST on the remote node. + * The details of the hardware on a remote node can be built locally, + * if required, by reading the LINKED LIST on the remote node and + * ignoring all the rboards on that node. + * + * The local node uses the REMOTE NODE NUMBER + OFFSET to point to the + * First board info on the remote node. The remote node list is + * traversed as the local list, using the REMOTE BASE ADDRESS and not + * the local base address and ignoring all rboard values. + * + * + KLCONFIG + + +------------+ +------------+ +------------+ +------------+ + | lboard | +-->| lboard | +-->| rboard | +-->| lboard | + +------------+ | +------------+ | +------------+ | +------------+ + | board info | | | board info | | |errinfo,bptr| | | board info | + +------------+ | +------------+ | +------------+ | +------------+ + | offset |--+ | offset |--+ | offset |--+ |offset=NULL | + +------------+ +------------+ +------------+ +------------+ + + + +------------+ + | board info | + +------------+ +--------------------------------+ + | compt 1 |------>| type, rev, diaginfo, size ... | (CPU) + +------------+ +--------------------------------+ + | compt 2 |--+ + +------------+ | +--------------------------------+ + | ... | +--->| type, rev, diaginfo, size ... | (MEM_BANK) + +------------+ +--------------------------------+ + | errinfo |--+ + +------------+ | +--------------------------------+ + +--->|r/l brd errinfo,compt err flags | + +--------------------------------+ + + * + * Each BOARD consists of COMPONENTs and the BOARD structure has + * pointers (offsets) to its COMPONENT structure. + * The COMPONENT structure has version info, size and speed info, revision, + * error info and the NIC info. This structure can accommodate any + * BOARD with arbitrary COMPONENT composition. + * + * The ERRORINFO part of each BOARD has error information + * that describes errors about the BOARD itself. It also has flags to + * indicate the COMPONENT(s) on the board that have errors. The error + * information specific to the COMPONENT is present in the respective + * COMPONENT structure. + * + * The ERRORINFO structure is also treated like a COMPONENT, ie. the + * BOARD has pointers(offset) to the ERRORINFO structure. The rboard + * structure also has a pointer to the ERRORINFO structure. This is + * the place to store ERRORINFO about a REMOTE NODE, if the HUB on + * that NODE is not working or if the REMOTE MEMORY is BAD. In cases where + * only the CPU of the REMOTE NODE is disabled, the ERRORINFO pointer can + * be a NODE NUMBER, REMOTE OFFSET combination, pointing to error info + * which is present on the REMOTE NODE.(TBD) + * REMOTE ERRINFO can be stored on any of the nearest nodes + * or on all the nearest nodes.(TBD) + * Like BOARD structures, REMOTE ERRINFO structures can be built locally + * using the rboard errinfo pointer. + * + * In order to get useful information from this Data organization, a set of + * interface routines are provided (TBD). The important thing to remember while + * manipulating the structures, is that, the NODE number information should + * be used. If the NODE is non-zero (remote) then each offset should + * be added to the REMOTE BASE ADDR else it should be added to the LOCAL BASE ADDR. + * This includes offsets for BOARDS, COMPONENTS and ERRORINFO. + * + * Note that these structures do not provide much info about connectivity. + * That info will be part of HWGRAPH, which is an extension of the cfg_t + * data structure. (ref IP27prom/cfg.h) It has to be extended to include + * the IO part of the Network(TBD). + * + * The data structures below define the above concepts. + */ + + +/* + * BOARD classes + */ + +#define KLCLASS_MASK 0xf0 +#define KLCLASS_NONE 0x00 +#define KLCLASS_NODE 0x10 /* CPU, Memory and HUB board */ +#define KLCLASS_CPU KLCLASS_NODE +#define KLCLASS_IO 0x20 /* BaseIO, 4 ch SCSI, ethernet, FDDI + and the non-graphics widget boards */ +#define KLCLASS_ROUTER 0x30 /* Router board */ +#define KLCLASS_MIDPLANE 0x40 /* We need to treat this as a board + so that we can record error info */ +#define KLCLASS_IOBRICK 0x70 /* IP35 iobrick */ +#define KLCLASS_MAX 8 /* Bump this if a new CLASS is added */ + +#define KLCLASS(_x) ((_x) & KLCLASS_MASK) + + +/* + * board types + */ + +#define KLTYPE_MASK 0x0f +#define KLTYPE(_x) ((_x) & KLTYPE_MASK) + +#define KLTYPE_SNIA (KLCLASS_CPU | 0x1) +#define KLTYPE_TIO (KLCLASS_CPU | 0x2) + +#define KLTYPE_ROUTER (KLCLASS_ROUTER | 0x1) +#define KLTYPE_META_ROUTER (KLCLASS_ROUTER | 0x3) +#define KLTYPE_REPEATER_ROUTER (KLCLASS_ROUTER | 0x4) + +#define KLTYPE_IOBRICK_XBOW (KLCLASS_MIDPLANE | 0x2) + +#define KLTYPE_IOBRICK (KLCLASS_IOBRICK | 0x0) +#define KLTYPE_NBRICK (KLCLASS_IOBRICK | 0x4) +#define KLTYPE_PXBRICK (KLCLASS_IOBRICK | 0x6) +#define KLTYPE_IXBRICK (KLCLASS_IOBRICK | 0x7) +#define KLTYPE_CGBRICK (KLCLASS_IOBRICK | 0x8) +#define KLTYPE_OPUSBRICK (KLCLASS_IOBRICK | 0x9) +#define KLTYPE_SABRICK (KLCLASS_IOBRICK | 0xa) +#define KLTYPE_IABRICK (KLCLASS_IOBRICK | 0xb) +#define KLTYPE_PABRICK (KLCLASS_IOBRICK | 0xc) +#define KLTYPE_GABRICK (KLCLASS_IOBRICK | 0xd) + + +/* + * board structures + */ + +#define MAX_COMPTS_PER_BRD 24 + +typedef struct lboard_s { + klconf_off_t brd_next_any; /* Next BOARD */ + unsigned char struct_type; /* type of structure, local or remote */ + unsigned char brd_type; /* type+class */ + unsigned char brd_sversion; /* version of this structure */ + unsigned char brd_brevision; /* board revision */ + unsigned char brd_promver; /* board prom version, if any */ + unsigned char brd_flags; /* Enabled, Disabled etc */ + unsigned char brd_slot; /* slot number */ + unsigned short brd_debugsw; /* Debug switches */ + geoid_t brd_geoid; /* geo id */ + partid_t brd_partition; /* Partition number */ + unsigned short brd_diagval; /* diagnostic value */ + unsigned short brd_diagparm; /* diagnostic parameter */ + unsigned char brd_inventory; /* inventory history */ + unsigned char brd_numcompts; /* Number of components */ + nic_t brd_nic; /* Number in CAN */ + nasid_t brd_nasid; /* passed parameter */ + klconf_off_t brd_compts[MAX_COMPTS_PER_BRD]; /* pointers to COMPONENTS */ + klconf_off_t brd_errinfo; /* Board's error information */ + struct lboard_s *brd_parent; /* Logical parent for this brd */ + char pad0[4]; + unsigned char brd_confidence; /* confidence that the board is bad */ + nasid_t brd_owner; /* who owns this board */ + unsigned char brd_nic_flags; /* To handle 8 more NICs */ + char pad1[24]; /* future expansion */ + char brd_name[32]; + nasid_t brd_next_same_host; /* host of next brd w/same nasid */ + klconf_off_t brd_next_same; /* Next BOARD with same nasid */ +} lboard_t; + +#define KLCF_NUM_COMPS(_brd) ((_brd)->brd_numcompts) +#define NODE_OFFSET_TO_KLINFO(n,off) ((klinfo_t*) TO_NODE_CAC(n,off)) +#define KLCF_NEXT(_brd) \ + ((_brd)->brd_next_same ? \ + (NODE_OFFSET_TO_LBOARD((_brd)->brd_next_same_host, (_brd)->brd_next_same)): NULL) +#define KLCF_NEXT_ANY(_brd) \ + ((_brd)->brd_next_any ? \ + (NODE_OFFSET_TO_LBOARD(NASID_GET(_brd), (_brd)->brd_next_any)): NULL) +#define KLCF_COMP(_brd, _ndx) \ + ((((_brd)->brd_compts[(_ndx)]) == 0) ? 0 : \ + (NODE_OFFSET_TO_KLINFO(NASID_GET(_brd), (_brd)->brd_compts[(_ndx)]))) + + +/* + * Generic info structure. This stores common info about a + * component. + */ + +typedef struct klinfo_s { /* Generic info */ + unsigned char struct_type; /* type of this structure */ + unsigned char struct_version; /* version of this structure */ + unsigned char flags; /* Enabled, disabled etc */ + unsigned char revision; /* component revision */ + unsigned short diagval; /* result of diagnostics */ + unsigned short diagparm; /* diagnostic parameter */ + unsigned char inventory; /* previous inventory status */ + unsigned short partid; /* widget part number */ + nic_t nic; /* MUst be aligned properly */ + unsigned char physid; /* physical id of component */ + unsigned int virtid; /* virtual id as seen by system */ + unsigned char widid; /* Widget id - if applicable */ + nasid_t nasid; /* node number - from parent */ + char pad1; /* pad out structure. */ + char pad2; /* pad out structure. */ + void *data; + klconf_off_t errinfo; /* component specific errors */ + unsigned short pad3; /* pci fields have moved over to */ + unsigned short pad4; /* klbri_t */ +} klinfo_t ; + + +static inline lboard_t *find_lboard_any(lboard_t * start, unsigned char brd_type) +{ + /* Search all boards stored on this node. */ + + while (start) { + if (start->brd_type == brd_type) + return start; + start = KLCF_NEXT_ANY(start); + } + /* Didn't find it. */ + return (lboard_t *) NULL; +} + + +/* external declarations of Linux kernel functions. */ + +extern lboard_t *root_lboard[]; +extern klinfo_t *find_component(lboard_t *brd, klinfo_t *kli, unsigned char type); +extern klinfo_t *find_first_component(lboard_t *brd, unsigned char type); + +#endif /* _ASM_IA64_SN_KLCONFIG_H */ |