diff options
Diffstat (limited to 'include/asm-m68knommu/anchor.h')
| -rw-r--r-- | include/asm-m68knommu/anchor.h | 112 |
1 files changed, 112 insertions, 0 deletions
diff --git a/include/asm-m68knommu/anchor.h b/include/asm-m68knommu/anchor.h new file mode 100644 index 00000000000..75390e0b40c --- /dev/null +++ b/include/asm-m68knommu/anchor.h @@ -0,0 +1,112 @@ +/****************************************************************************/ + +/* + * anchor.h -- Anchor CO-MEM Lite PCI host bridge part. + * + * (C) Copyright 2000, Moreton Bay (www.moreton.com.au) + */ + +/****************************************************************************/ +#ifndef anchor_h +#define anchor_h +/****************************************************************************/ + +/* + * Define basic addressing info. + */ +#if defined(CONFIG_MOTOROLA) && defined(CONFIG_M5407) +#define COMEM_BASE 0xFFFF0000 /* Base of CO-MEM address space */ +#define COMEM_IRQ 25 /* IRQ of anchor part */ +#else +#define COMEM_BASE 0x80000000 /* Base of CO-MEM address space */ +#define COMEM_IRQ 25 /* IRQ of anchor part */ +#endif + +/****************************************************************************/ + +/* + * 4-byte registers of CO-MEM, so adjust register addresses for + * easy access. Handy macro for word access too. + */ +#define LREG(a) ((a) >> 2) +#define WREG(a) ((a) >> 1) + + +/* + * Define base addresses within CO-MEM Lite register address space. + */ +#define COMEM_I2O 0x0000 /* I2O registers */ +#define COMEM_OPREGS 0x0400 /* Operation registers */ +#define COMEM_PCIBUS 0x2000 /* Direct access to PCI bus */ +#define COMEM_SHMEM 0x4000 /* Shared memory region */ + +#define COMEM_SHMEMSIZE 0x4000 /* Size of shared memory */ + + +/* + * Define CO-MEM Registers. + */ +#define COMEM_I2OHISR 0x0030 /* I2O host interrupt status */ +#define COMEM_I2OHIMR 0x0034 /* I2O host interrupt mask */ +#define COMEM_I2OLISR 0x0038 /* I2O local interrupt status */ +#define COMEM_I2OLIMR 0x003c /* I2O local interrupt mask */ +#define COMEM_IBFPFIFO 0x0040 /* I2O inbound free/post FIFO */ +#define COMEM_OBPFFIFO 0x0044 /* I2O outbound post/free FIFO */ +#define COMEM_IBPFFIFO 0x0048 /* I2O inbound post/free FIFO */ +#define COMEM_OBFPFIFO 0x004c /* I2O outbound free/post FIFO */ + +#define COMEM_DAHBASE 0x0460 /* Direct access base address */ + +#define COMEM_NVCMD 0x04a0 /* I2C serial command */ +#define COMEM_NVREAD 0x04a4 /* I2C serial read */ +#define COMEM_NVSTAT 0x04a8 /* I2C status */ + +#define COMEM_DMALBASE 0x04b0 /* DMA local base address */ +#define COMEM_DMAHBASE 0x04b4 /* DMA host base address */ +#define COMEM_DMASIZE 0x04b8 /* DMA size */ +#define COMEM_DMACTL 0x04bc /* DMA control */ + +#define COMEM_HCTL 0x04e0 /* Host control */ +#define COMEM_HINT 0x04e4 /* Host interrupt control/status */ +#define COMEM_HLDATA 0x04e8 /* Host to local data mailbox */ +#define COMEM_LINT 0x04f4 /* Local interrupt contole status */ +#define COMEM_LHDATA 0x04f8 /* Local to host data mailbox */ + +#define COMEM_LBUSCFG 0x04fc /* Local bus configuration */ + + +/* + * Commands and flags for use with Direct Access Register. + */ +#define COMEM_DA_IACK 0x00000000 /* Interrupt acknowledge (read) */ +#define COMEM_DA_SPCL 0x00000010 /* Special cycle (write) */ +#define COMEM_DA_MEMRD 0x00000004 /* Memory read cycle */ +#define COMEM_DA_MEMWR 0x00000004 /* Memory write cycle */ +#define COMEM_DA_IORD 0x00000002 /* I/O read cycle */ +#define COMEM_DA_IOWR 0x00000002 /* I/O write cycle */ +#define COMEM_DA_CFGRD 0x00000006 /* Configuration read cycle */ +#define COMEM_DA_CFGWR 0x00000006 /* Configuration write cycle */ + +#define COMEM_DA_ADDR(a) ((a) & 0xffffe000) + +#define COMEM_DA_OFFSET(a) ((a) & 0x00001fff) + + +/* + * The PCI bus will be limited in what slots will actually be used. + * Define valid device numbers for different boards. + */ +#if defined(CONFIG_MOTOROLA) && defined(CONFIG_M5407) +#define COMEM_MINDEV 14 /* Minimum valid DEVICE */ +#define COMEM_MAXDEV 14 /* Maximum valid DEVICE */ +#define COMEM_BRIDGEDEV 15 /* Slot bridge is in */ +#else +#define COMEM_MINDEV 0 /* Minimum valid DEVICE */ +#define COMEM_MAXDEV 3 /* Maximum valid DEVICE */ +#endif + +#define COMEM_MAXPCI (COMEM_MAXDEV+1) /* Maximum PCI devices */ + + +/****************************************************************************/ +#endif /* anchor_h */ |